ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMI

Current AP4 FSI set_rate function used bogus clock process
which didn't care enable/disable and clk->usecound.
To solve this issue, this patch also modify FSI driver to call
set_rate with enough options.
This patch modify it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index d3260542b943df9a4743b7ba5489f3a0d5733780..61c1068198ecec10368f9d735eda55f56a318f66 100644 (file)
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -567,40 +567,72 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI                evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+       int ret = 0;
+
+       if (rate <= 0)
+               return ret;
 
-static int fsi_set_rate(int is_porta, int rate)
+       if (enable) {
+               ret = clk_set_rate(clk, clk_round_rate(clk, rate));
+               if (0 == ret)
+                       ret = clk_enable(clk);
+       } else {
+               clk_disable(clk);
+       }
+
+       return ret;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
 {
        struct clk *fsib_clk;
        struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+       long fsib_rate = 0;
+       long fdiv_rate = 0;
+       int ackmd_bpfmd;
        int ret;
 
        /* set_rate is not needed if port A */
        if (is_porta)
                return 0;
 
-       fsib_clk = clk_get(NULL, "fsib_clk");
-       if (IS_ERR(fsib_clk))
-               return -EINVAL;
-
        switch (rate) {
        case 44100:
-               clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
-               ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+               fsib_rate       = rate * 256;
+               ackmd_bpfmd     = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
                break;
        case 48000:
-               clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
-               clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
-               ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+               fsib_rate       = 85428000; /* around 48kHz x 256 x 7 */
+               fdiv_rate       = rate * 256;
+               ackmd_bpfmd     = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
                break;
        default:
                pr_err("unsupported rate in FSI2 port B\n");
-               ret = -EINVAL;
-               break;
+               return -EINVAL;
        }
 
+       /* FSI B setting */
+       fsib_clk = clk_get(dev, "ickb");
+       if (IS_ERR(fsib_clk))
+               return -EIO;
+
+       ret = __fsi_set_rate(fsib_clk, fsib_rate, enable);
        clk_put(fsib_clk);
+       if (ret < 0)
+               return ret;
 
-       return ret;
+       /* FSI DIV setting */
+       ret = __fsi_set_rate(fdiv_clk, fdiv_rate, enable);
+       if (ret < 0) {
+               /* disable FSI B */
+               if (enable)
+                       __fsi_set_rate(fsib_clk, fsib_rate, 0);
+               return ret;
+       }
+
+       return ackmd_bpfmd;
 }
 
 static struct sh_fsi_platform_info fsi_info = {

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 13226323e4e03eef1462fd6c626f7f15068b86bd..4191e292112778f90d7b801cb0830358de111e81 100644 (file)
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -471,7 +471,7 @@ static int fsidiv_set_rate(struct clk *clk,
                return -ENOENT;
 
        __raw_writel(idx << 16, clk->mapping->base);
-       return fsidiv_enable(clk);
+       return 0;
 }
 
 static struct clk_ops fsidiv_clk_ops = {

diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h
index fa60cbda90a4553f69b9b1ce94e51fd7df9fa880..d79894192ae3e10cb5f072c51f2ed640c7ba76fd 100644 (file)
--- a/include/sound/sh_fsi.h
+++ b/include/sound/sh_fsi.h
@@ -85,7 +85,9 @@
  *     ACK_MD (FSI2)
  *     CKG1   (FSI)
  *
- * err:  return value < 0
+ * err         : return value <  0
+ * no change   : return value == 0
+ * change xMD  : return value >  0
  *
  * 0x-00000AB
  *
@@ -111,7 +113,7 @@
 struct sh_fsi_platform_info {
        unsigned long porta_flags;
        unsigned long portb_flags;
-       int (*set_rate)(int is_porta, int rate); /* for master mode */
+       int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 };
 
 #endif /* __SOUND_FSI_H */

diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 507e709f2807c52995bed6c8dfaad09981ce471d..136414f163e9c23a1853f84020b11adf8b72c63b 100644 (file)
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -132,6 +132,8 @@ struct fsi_priv {
        struct fsi_stream playback;
        struct fsi_stream capture;
 
+       long rate;
+
        u32 mst_ctrl;
 };
 
@@ -854,10 +856,17 @@ static void fsi_dai_shutdown(struct snd_pcm_substream *substream,
 {
        struct fsi_priv *fsi = fsi_get_priv(substream);
        int is_play = fsi_is_play(substream);
+       struct fsi_master *master = fsi_get_master(fsi);
+       int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 
        fsi_irq_disable(fsi, is_play);
        fsi_clk_ctrl(fsi, 0);
 
+       set_rate = master->info->set_rate;
+       if (set_rate && fsi->rate)
+               set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0);
+       fsi->rate = 0;
+
        pm_runtime_put_sync(dai->dev);
 }
 
@@ -891,9 +900,10 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
 {
        struct fsi_priv *fsi = fsi_get_priv(substream);
        struct fsi_master *master = fsi_get_master(fsi);
-       int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
+       int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
        int fsi_ver = master->core->ver;
        int is_play = fsi_is_play(substream);
+       long rate = params_rate(params);
        int ret;
 
        /* if slave mode, set_rate is not needed */
@@ -901,10 +911,15 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
                return 0;
 
        /* it is error if no set_rate */
+       set_rate = master->info->set_rate;
        if (!set_rate)
                return -EIO;
 
-       ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
+       ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1);
+       if (ret < 0) /* error */
+               return ret;
+
+       fsi->rate = rate;
        if (ret > 0) {
                u32 data = 0;