return 0;
}
+/**
+ * ata_pci_init_native_host - acquire native ATA resources and init host
+ * @host: target ATA host
+ * @port_mask: ports to consider
+ *
+ * Acquire native PCI ATA resources for @host and initialize
+ * @host accordoingly.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask)
+{
+ struct device *gdev = host->dev;
+ struct pci_dev *pdev = to_pci_dev(gdev);
+ int i, rc;
+
+ /* Discard disabled ports. Some controllers show their unused
+ * channels this way. Disabled ports are made dummy.
+ */
+ for (i = 0; i < 2; i++) {
+ if ((port_mask & (1 << i)) && !ata_resources_present(pdev, i)) {
+ host->ports[i]->ops = &ata_dummy_port_ops;
+ port_mask &= ~(1 << i);
+ }
+ }
+
+ if (!port_mask) {
+ dev_printk(KERN_ERR, gdev, "no available port\n");
+ return -ENODEV;
+ }
+
+ /* request, iomap BARs and init port addresses accordingly */
+ for (i = 0; i < 2; i++) {
+ struct ata_port *ap = host->ports[i];
+ int base = i * 2;
+ void __iomem * const *iomap;
+
+ if (!(port_mask & (1 << i)))
+ continue;
+
+ rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME);
+ if (rc) {
+ dev_printk(KERN_ERR, gdev, "failed to request/iomap "
+ "BARs for port %d (errno=%d)\n", i, rc);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ return rc;
+ }
+ host->iomap = iomap = pcim_iomap_table(pdev);
+
+ ap->ioaddr.cmd_addr = iomap[base];
+ ap->ioaddr.altstatus_addr =
+ ap->ioaddr.ctl_addr = (void __iomem *)
+ ((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS);
+ ata_std_ports(&ap->ioaddr);
+ }
+
+ return 0;
+}
+
struct ata_legacy_devres {
unsigned int mask;
unsigned long cmd_port[2];
unsigned int n_ports)
{
struct device *dev = &pdev->dev;
- struct ata_probe_ent *probe_ent = NULL;
struct ata_host *host = NULL;
const struct ata_port_info *port[2];
u8 mask;
Checking dev->is_enabled is insufficient as this is not set at
boot for the primary video which is BIOS enabled
- */
+ */
rc = pcim_enable_device(pdev);
if (rc)
#endif
}
+ /* alloc and init host */
+ host = ata_host_alloc_pinfo(dev, port, 2);
+ if (!host) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to allocate ATA host\n");
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
if (!legacy_mode) {
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc) {
- pcim_pin_device(pdev);
- goto err_out;
- }
+ unsigned int port_mask;
- /* TODO: If we get no DMA mask we should fall back to PIO */
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ port_mask = ATA_PORT_PRIMARY;
+ if (n_ports > 1)
+ port_mask |= ATA_PORT_SECONDARY;
+
+ rc = ata_pci_init_native_host(host, port_mask);
if (rc)
goto err_out;
-
- pci_set_master(pdev);
} else {
int was_busy = 0;
- rc = -ENOMEM;
- host = ata_host_alloc_pinfo(dev, port, 2);
- if (!host)
- goto err_out;
-
rc = ata_init_legacy_host(host, &legacy_mode, &was_busy);
if (was_busy)
pcim_pin_device(pdev);
/* request respective PCI regions, may fail */
rc = pci_request_region(pdev, 1, DRV_NAME);
rc = pci_request_region(pdev, 3, DRV_NAME);
-
- /* init bmdma */
- ata_pci_init_bmdma(host);
- pci_set_master(pdev);
}
- if (legacy_mode) {
+ /* init BMDMA, may fail */
+ ata_pci_init_bmdma(host);
+ pci_set_master(pdev);
+
+ /* start host and request IRQ */
+ rc = ata_host_start(host);
+ if (rc)
+ goto err_out;
+
+ if (!legacy_mode)
+ rc = devm_request_irq(dev, pdev->irq,
+ port_info[0]->port_ops->irq_handler,
+ IRQF_SHARED, DRV_NAME, host);
+ else {
irq_handler_t handler[2] = { host->ops->irq_handler,
host->ops->irq_handler };
unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED };
void *dev_id[2] = { host, host };
- rc = ata_host_start(host);
- if (rc)
- goto err_out;
-
rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id);
- if (rc)
- goto err_out;
-
- rc = ata_host_register(host, port_info[0]->sht);
- if (rc)
- goto err_out;
- } else {
- if (n_ports == 2)
- probe_ent = ata_pci_init_native_mode(pdev, (struct ata_port_info **)port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
- else
- probe_ent = ata_pci_init_native_mode(pdev, (struct ata_port_info **)port, ATA_PORT_PRIMARY);
-
- if (!probe_ent) {
- rc = -ENOMEM;
- goto err_out;
- }
+ }
+ if (rc)
+ goto err_out;
- if (!ata_device_add(probe_ent)) {
- rc = -ENODEV;
- goto err_out;
- }
+ /* register */
+ rc = ata_host_register(host, port_info[0]->sht);
+ if (rc)
+ goto err_out;
- devm_kfree(dev, probe_ent);
- }
devres_remove_group(dev, NULL);
return 0;