*/
#include "af9005.h"
/* debug */
-int dvb_usb_af9005_remote_debug;
+static int dvb_usb_af9005_remote_debug;
module_param_named(debug, dvb_usb_af9005_remote_debug, int, 0644);
MODULE_PARM_DESC(debug,
"enable (1) or disable (0) debug messages."
u8 val;
} RegDesc;
-RegDesc script[] = {
+static RegDesc script[] = {
{0xa180, 0x0, 0x8, 0xa},
{0xa181, 0x0, 0x8, 0xd7},
{0xa182, 0x0, 0x8, 0xa3},
MODULE_PARM_DESC(led, "enable led (default: 1).");
/* eeprom dump */
-int dvb_usb_af9005_dump_eeprom = 0;
+static int dvb_usb_af9005_dump_eeprom;
module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0);
MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom.");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
/* remote control decoder */
-int (*rc_decode) (struct dvb_usb_device * d, u8 * data, int len, u32 * event,
- int *state);
-void *rc_keys;
-int *rc_keys_size;
+static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len,
+ u32 *event, int *state);
+static void *rc_keys;
+static int *rc_keys_size;
u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff };
int led_state;
};
-int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 * wbuf, u16 wlen,
- u8 * rbuf, u16 rlen, int delay_ms)
+static int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen,
+ u8 *rbuf, u16 rlen, int delay_ms)
{
int actlen, ret = -ENOMEM;
return ret;
}
-int af9005_usb_generic_write(struct dvb_usb_device *d, u8 * buf, u16 len)
-{
- return af9005_usb_generic_rw(d, buf, len, NULL, 0, 0);
-}
-
-int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
+static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
int readwrite, int type, u8 * values, int len)
{
struct af9005_device_state *st = d->priv;
return 0;
}
-int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw)
+static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw)
{
int i, packets, ret, act_len;
u8 demod_address;
};
-static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val) {
- int r = 0;
- u8 buf[] = {(u8) (val>>24), (u8) (val>>16), (u8) (val>>8)};
+static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val)
+{
+ u8 buf[] = {
+ (u8)((val >> 24) & 0xff),
+ (u8)((val >> 16) & 0xff),
+ (u8)((val >> 8) & 0xff)
+ };
+
if (fe->ops.write)
- r = fe->ops.write(fe, buf, 3);
- return r;
+ return fe->ops.write(fe, buf, 3);
+ return 0;
}
#if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE))
}
EXPORT_SYMBOL(dib7000m_get_i2c_master);
-int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000m_config cfg[])
+static int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods,
+ u8 default_addr, struct dib7000m_config cfg[])
{
struct dib7000m_state st = { .i2c_adap = i2c };
int k = 0;
static struct dvb_frontend_ops dvb_dummy_fe_qpsk_ops;
-struct dvb_frontend* dvb_dummy_fe_qpsk_attach()
+struct dvb_frontend *dvb_dummy_fe_qpsk_attach(void)
{
struct dvb_dummy_fe_state* state = NULL;
static struct dvb_frontend_ops dvb_dummy_fe_qam_ops;
-struct dvb_frontend* dvb_dummy_fe_qam_attach()
+struct dvb_frontend *dvb_dummy_fe_qam_attach(void)
{
struct dvb_dummy_fe_state* state = NULL;
struct dvb_frontend_parameters *p)
{
struct sp887x_state* state = fe->demodulator_priv;
- int actual_freq, err;
+ unsigned actual_freq;
+ int err;
u16 val, reg0xc05;
if (p->u.ofdm.bandwidth != BANDWIDTH_8_MHZ &&
irdebi(av7110, DEBISWAB, addr, 0, len);
}
-static void debiirq(unsigned long data)
+static void debiirq(unsigned long cookie)
{
- struct av7110 *av7110 = (struct av7110 *) data;
+ struct av7110 *av7110 = (struct av7110 *)cookie;
int type = av7110->debitype;
int handle = (type >> 8) & 0x1f;
unsigned int xfer = 0;
}
/* irq from av7110 firmware writing the mailbox register in the DPRAM */
-static void gpioirq(unsigned long data)
+static void gpioirq(unsigned long cookie)
{
- struct av7110 *av7110 = (struct av7110 *) data;
+ struct av7110 *av7110 = (struct av7110 *)cookie;
u32 rxbuf, txbuf;
int len;
return status;
}
-static void vpeirq(unsigned long data)
+static void vpeirq(unsigned long cookie)
{
- struct av7110 *budget = (struct av7110 *) data;
+ struct av7110 *budget = (struct av7110 *)cookie;
u8 *mem = (u8 *) (budget->grabbing);
u32 olddma = budget->ttbp;
u32 newdma = saa7146_read(budget->dev, PCI_VDP3);
*
* This sets all user changeable properties to the values in cam->params.
*****************************************************************************/
-int set_all_properties(struct camera_data *cam)
+static int set_all_properties(struct camera_data *cam)
{
/**
* Don't set target_kb here, it will be set later.
* get_color_params
*
*****************************************************************************/
-void get_color_params(struct camera_data *cam)
+static void get_color_params(struct camera_data *cam)
{
cpia2_do_command(cam, CPIA2_CMD_GET_VP_BRIGHTNESS, TRANSFER_READ, 0);
cpia2_do_command(cam, CPIA2_CMD_GET_VP_SATURATION, TRANSFER_READ, 0);
* wake_system
*
*****************************************************************************/
-void wake_system(struct camera_data *cam)
+static void wake_system(struct camera_data *cam)
{
cpia2_do_command(cam, CPIA2_CMD_SET_WAKEUP, TRANSFER_WRITE, 0);
}
*
* Valid for STV500 sensor only
*****************************************************************************/
-void set_lowlight_boost(struct camera_data *cam)
+static void set_lowlight_boost(struct camera_data *cam)
{
struct cpia2_command cmd;
*
* Sets all values to the defaults
*****************************************************************************/
-void reset_camera_struct(struct camera_data *cam)
+static void reset_camera_struct(struct camera_data *cam)
{
/***
* The following parameter values are the defaults from the register map.
* set_alternate
*
*****************************************************************************/
-int set_alternate(struct camera_data *cam, unsigned int alt)
+static int set_alternate(struct camera_data *cam, unsigned int alt)
{
int ret = 0;
/* ------------------------------------------------------------------ */
/* MPEG encoder API */
-char *cmd_to_str(int cmd)
+static char *cmd_to_str(int cmd)
{
switch (cmd) {
case CX2341X_ENC_PING_FW:
return 0;
}
-int cx23885_stop_vbi_dma(struct cx23885_dev *dev)
-{
- /* stop dma */
- cx_clear(VID_A_DMA_CTL, 0x00000022);
-
- /* disable irqs */
- cx_clear(PCI_INT_MSK, 0x000001);
- cx_clear(VID_A_INT_MSK, 0x00000022);
- return 0;
-}
-int cx23885_restart_vbi_queue(struct cx23885_dev *dev,
+static int cx23885_restart_vbi_queue(struct cx23885_dev *dev,
struct cx23885_dmaqueue *q)
{
struct cx23885_buffer *buf;
};
static const int CX23885_CTLS = ARRAY_SIZE(cx23885_ctls);
-const u32 cx23885_user_ctrls[] = {
+static const u32 cx23885_user_ctrls[] = {
V4L2_CID_USER_CLASS,
V4L2_CID_BRIGHTNESS,
V4L2_CID_CONTRAST,
V4L2_CID_AUDIO_MUTE,
0
};
-EXPORT_SYMBOL(cx23885_user_ctrls);
static const u32 *ctrl_classes[] = {
cx23885_user_ctrls,
NULL
};
-void cx23885_video_wakeup(struct cx23885_dev *dev,
+static void cx23885_video_wakeup(struct cx23885_dev *dev,
struct cx23885_dmaqueue *q, u32 count)
{
struct cx23885_buffer *buf;
__func__, bc);
}
-int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm)
+static int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm)
{
dprintk(1, "%s(norm = 0x%08x) name: [%s]\n",
__func__,
return 0;
}
-struct video_device *cx23885_vdev_init(struct cx23885_dev *dev,
+static struct video_device *cx23885_vdev_init(struct cx23885_dev *dev,
struct pci_dev *pci,
struct video_device *template,
char *type)
return vfd;
}
-int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl)
+static int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl)
{
int i;
*qctrl = cx23885_ctls[i].v;
return 0;
}
-EXPORT_SYMBOL(cx23885_ctrl_query);
/* ------------------------------------------------------------------- */
/* resource management */
mutex_unlock(&dev->lock);
}
-int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
+static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
{
struct v4l2_routing route;
memset(&route, 0, sizeof(route));
return 0;
}
-EXPORT_SYMBOL(cx23885_video_mux);
/* ------------------------------------------------------------------ */
-int cx23885_set_scale(struct cx23885_dev *dev, unsigned int width,
+static int cx23885_set_scale(struct cx23885_dev *dev, unsigned int width,
unsigned int height, enum v4l2_field field)
{
dprintk(1, "%s()\n", __func__);
/* ------------------------------------------------------------------ */
/* VIDEO CTRL IOCTLS */
-int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl)
+static int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl)
{
dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __func__);
cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_CTRL, ctl);
return 0;
}
-EXPORT_SYMBOL(cx23885_get_control);
-int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl)
+static int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl)
{
dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)"
" (disabled - no action)\n", __func__);
return 0;
}
-EXPORT_SYMBOL(cx23885_set_control);
static void init_controls(struct cx23885_dev *dev)
{
return 0;
}
-int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i)
+static int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i)
{
static const char *iname[] = {
[CX23885_VMUX_COMPOSITE1] = "Composite1",
i->std = CX23885_NORMS;
return 0;
}
-EXPORT_SYMBOL(cx23885_enum_input);
static int vidioc_enum_input(struct file *file, void *priv,
struct v4l2_input *i)
return 0;
}
-int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f)
+static int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f)
{
if (unlikely(UNSET == dev->tuner_type))
return -EINVAL;
return 0;
}
-EXPORT_SYMBOL(cx23885_set_freq);
static int vidioc_s_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
/* ------------------------------------------------------------------ */
-int register_dvb(struct em28xx_dvb *dvb,
+static int register_dvb(struct em28xx_dvb *dvb,
struct module *module,
struct em28xx *dev,
struct device *device)
}
for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
write_timeout -= 5) {
- unsigned msg = dev->em28xx_read_reg(dev, 0x5);
- if (msg == 0x94)
+ unsigned reg = dev->em28xx_read_reg(dev, 0x5);
+
+ if (reg == 0x94)
return -ENODEV;
- else if (msg == 0x84)
+ else if (reg == 0x84)
return 0;
msleep(5);
}
/* frame properties */
int width; /* current frame width */
int height; /* current frame height */
- int hscale; /* horizontal scale factor (see datasheet) */
- int vscale; /* vertical scale factor (see datasheet) */
+ unsigned hscale; /* horizontal scale factor (see datasheet) */
+ unsigned vscale; /* vertical scale factor (see datasheet) */
int interlaced; /* 1=interlace fileds, 0=just top fileds */
unsigned int video_bytesread; /* Number of bytes read */
{0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10},
};
-struct sensor_data sensor_data[] = {
+static struct sensor_data sensor_data[] = {
SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
.step = 1,
#define FREQ_DEF 1
.default_value = FREQ_DEF,
- .default_value = 1,
},
.set = sd_setfreq,
.get = sd_getfreq,
#define GENERIC_REG_ID_LOW 0x1D /* manufacturer ID LSB */
#define GENERIC_REG_COM_I 0x29 /* misc ID bits */
-extern struct ovcamchip_ops ov6x20_ops;
-extern struct ovcamchip_ops ov6x30_ops;
-extern struct ovcamchip_ops ov7x10_ops;
-extern struct ovcamchip_ops ov7x20_ops;
-extern struct ovcamchip_ops ov76be_ops;
-
static char *chip_names[NUM_CC_TYPES] = {
[CC_UNKNOWN] = "Unknown chip",
[CC_OV76BE] = "OV76BE",
int initialized; /* OVCAMCHIP_CMD_INITIALIZE was successful */
};
+extern struct ovcamchip_ops ov6x20_ops;
+extern struct ovcamchip_ops ov6x30_ops;
+extern struct ovcamchip_ops ov7x10_ops;
+extern struct ovcamchip_ops ov7x20_ops;
+extern struct ovcamchip_ops ov76be_ops;
+
/* --------------------------------- */
/* I2C I/O */
/* --------------------------------- */
if ((detail & PVR2_I2C_DETAIL_CTLMASK) && cp->ctl_mask) {
unsigned int idx;
unsigned long msk,sm;
- int spcfl;
+
bcnt = scnprintf(buf,maxlen," [");
ccnt += bcnt; buf += bcnt; maxlen -= bcnt;
sm = 0;
return;
}
-void s2255_reset_dsppower(struct s2255_dev *dev)
+static void s2255_reset_dsppower(struct s2255_dev *dev)
{
s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b0b, NULL, 0, 1);
msleep(10);
"\n");
#endif
+/*
+ Add the probe entries to this table. Be sure to add the entry in the right
+ place, since, on failure, the next probing routine is called according to
+ the order of the list below, from top to bottom.
+*/
+static int (*sn9c102_sensor_table[])(struct sn9c102_device *) = {
+ &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */
+ &sn9c102_probe_hv7131r, /* strong detection based on SENSOR ids */
+ &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */
+ &sn9c102_probe_mi0360, /* strong detection based on SENSOR ids */
+ &sn9c102_probe_mt9v111, /* strong detection based on SENSOR ids */
+ &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */
+ &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */
+ &sn9c102_probe_ov7630, /* strong detection based on SENSOR ids */
+ &sn9c102_probe_ov7660, /* strong detection based on SENSOR ids */
+ &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */
+ &sn9c102_probe_tas5110d, /* detection based on USB pid/vid */
+ &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */
+};
+
/*****************************************************************************/
static u32
extern int sn9c102_probe_tas5110d(struct sn9c102_device* cam);
extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
-/*
- Add the above entries to this table. Be sure to add the entry in the right
- place, since, on failure, the next probing routine is called according to
- the order of the list below, from top to bottom.
-*/
-static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = {
- &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */
- &sn9c102_probe_hv7131r, /* strong detection based on SENSOR ids */
- &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */
- &sn9c102_probe_mi0360, /* strong detection based on SENSOR ids */
- &sn9c102_probe_mt9v111, /* strong detection based on SENSOR ids */
- &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */
- &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */
- &sn9c102_probe_ov7630, /* strong detection based on SENSOR ids */
- &sn9c102_probe_ov7660, /* strong detection based on SENSOR ids */
- &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */
- &sn9c102_probe_tas5110d, /* detection based on USB pid/vid */
- &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */
-};
-
#endif /* _SN9C102_DEVTABLE_H_ */
***************************************************************************/
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int hv7131d_init(struct sn9c102_device* cam)
***************************************************************************/
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int hv7131r_init(struct sn9c102_device* cam)
***************************************************************************/
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int mi0343_init(struct sn9c102_device* cam)
***************************************************************************/
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int mi0360_init(struct sn9c102_device* cam)
***************************************************************************/
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int mt9v111_init(struct sn9c102_device *cam)
***************************************************************************/
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int ov7630_init(struct sn9c102_device* cam)
***************************************************************************/
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int ov7660_init(struct sn9c102_device* cam)
#include <linux/delay.h>
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int pas106b_init(struct sn9c102_device* cam)
#include <linux/delay.h>
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int pas202bcb_init(struct sn9c102_device* cam)
***************************************************************************/
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int tas5110c1b_init(struct sn9c102_device* cam)
***************************************************************************/
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int tas5110d_init(struct sn9c102_device* cam)
***************************************************************************/
#include "sn9c102_sensor.h"
+#include "sn9c102_devtable.h"
static int tas5130d1b_init(struct sn9c102_device* cam)
ZR36057_ISR_GIRQ1 | \
ZR36057_ISR_JPEGRepIRQ )
-extern const struct zoran_format zoran_formats[];
-
static int lml33dpath; /* default = 0
* 1 will use digital path in capture
* mode instead of analog. It can be
extern void zoran_init_hardware(struct zoran *zr);
extern void zr36057_restart(struct zoran *zr);
+extern const struct zoran_format zoran_formats[];
+
+extern int v4l_nbufs;
+extern int v4l_bufsize;
+extern int jpg_nbufs;
+extern int jpg_bufsize;
+extern int pass_through;
+
/* i2c */
extern int decoder_command(struct zoran *zr,
int cmd,
// RJ: Test only - want to test BUZ_USE_HIMEM even when CONFIG_BIGPHYS_AREA is defined
-extern int v4l_nbufs;
-extern int v4l_bufsize;
-extern int jpg_nbufs;
-extern int jpg_bufsize;
-extern int pass_through;
-
static int lock_norm; /* 0 = default 1 = Don't change TV standard (norm) */
module_param(lock_norm, int, 0644);
MODULE_PARM_DESC(lock_norm, "Prevent norm changes (1 = ignore, >1 = fail)");