+++ /dev/null
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c 2015-01-01 17:34:32.005507318 +0100
-@@ -209,6 +209,10 @@
- .gate = SW_ONLY_GATE(0x0360, 20, 4),
- };
-
-+static struct bus_clk_data usb_otg_ahb_data = {
-+ .gate = HW_SW_GATE_AUTO(0x0348, 16, 0, 1),
-+};
-+
- static struct bus_clk_data sdio1_ahb_data = {
- .gate = HW_SW_GATE_AUTO(0x0358, 16, 0, 1),
- };
-@@ -331,6 +335,17 @@
- */
-
- /* KPM bus clocks */
-+static struct bus_clock usb_otg_ahb_clk = {
-+ .clk = {
-+ .name = "usb_otg_ahb_clk",
-+ .parent = &kpm_ccu_clk.clk,
-+ .ops = &bus_clk_ops,
-+ .ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
-+ },
-+ .freq_tbl = master_ahb_freq_tbl,
-+ .data = &usb_otg_ahb_data,
-+};
-+
- static struct bus_clock sdio1_ahb_clk = {
- .clk = {
- .name = "sdio1_ahb_clk",
-@@ -541,6 +556,7 @@
- CLK_LK(bsc2),
- CLK_LK(bsc3),
- /* Bus clocks */
-+ CLK_LK(usb_otg_ahb),
- CLK_LK(sdio1_ahb),
- CLK_LK(sdio2_ahb),
- CLK_LK(sdio3_ahb),
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c u-boot/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c 2015-01-01 17:34:32.005507318 +0100
-@@ -0,0 +1,27 @@
-+/*
-+ * Copyright 2014 Broadcom Corporation.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/errno.h>
-+#include <asm/arch/sysmap.h>
-+#include "clk-core.h"
-+
-+/* Enable appropriate clocks for the USB OTG port */
-+int clk_usb_otg_enable(void *base)
-+{
-+ char *ahbstr;
-+
-+ switch ((u32) base) {
-+ case HSOTG_BASE_ADDR:
-+ ahbstr = "usb_otg_ahb_clk";
-+ break;
-+ default:
-+ printf("%s: base 0x%p not found\n", __func__, base);
-+ return -EINVAL;
-+ }
-+
-+ return clk_get_and_enable(ahbstr);
-+}
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/Makefile u-boot/arch/arm/cpu/armv7/bcm281xx/Makefile
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/bcm281xx/Makefile 2015-01-01 17:34:32.005507318 +0100
-@@ -10,3 +10,4 @@
- obj-y += clk-sdio.o
- obj-y += clk-bsc.o
- obj-$(CONFIG_BCM_SF2_ETH) += clk-eth.o
-+obj-y += clk-usb-otg.o
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/kona-common/clk-stubs.c u-boot/arch/arm/cpu/armv7/kona-common/clk-stubs.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/kona-common/clk-stubs.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/kona-common/clk-stubs.c 2015-01-01 17:34:32.009507252 +0100
-@@ -19,3 +19,8 @@
- {
- return 0;
- }
-+
-+int __weak clk_usb_otg_enable(void *base)
-+{
-+ return 0;
-+}
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/cpu.c u-boot/arch/arm/cpu/armv7/ls102xa/cpu.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/cpu.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/ls102xa/cpu.c 2015-01-01 17:34:32.009507252 +0100
-@@ -12,6 +12,8 @@
- #include <netdev.h>
- #include <fsl_esdhc.h>
-
-+#include "fsl_epu.h"
-+
- DECLARE_GLOBAL_DATA_PTR;
-
- #if defined(CONFIG_DISPLAY_CPUINFO)
-@@ -101,3 +103,35 @@
-
- return 0;
- }
-+
-+int arch_cpu_init(void)
-+{
-+ void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
-+
-+ /*
-+ * After wakeup from deep sleep, Clear EPU registers
-+ * as early as possible to prevent from possible issue.
-+ * It's also safe to clear at normal boot.
-+ */
-+ fsl_epu_clean(epu_base);
-+
-+ return 0;
-+}
-+
-+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
-+/* Set the address at which the secondary core starts from.*/
-+void smp_set_core_boot_addr(unsigned long addr, int corenr)
-+{
-+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-+
-+ out_be32(&gur->scratchrw[0], addr);
-+}
-+
-+/* Release the secondary core from holdoff state and kick it */
-+void smp_kick_all_cpus(void)
-+{
-+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-+
-+ out_be32(&gur->brrl, 0x2);
-+}
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fdt.c u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fdt.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c 2015-01-01 17:34:32.009507252 +0100
-@@ -91,7 +91,7 @@
- }
-
- do_fixup_by_prop_u32(blob, "device_type", "soc",
-- 4, "bus-frequency", busclk / 2, 1);
-+ 4, "bus-frequency", busclk, 1);
-
- ft_fixup_enet_phy_connect_type(blob);
-
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.c u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.c 2015-01-01 17:34:32.009507252 +0100
-@@ -0,0 +1,57 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+
-+#include "fsl_epu.h"
-+
-+/**
-+ * fsl_epu_clean - Clear EPU registers
-+ */
-+void fsl_epu_clean(void *epu_base)
-+{
-+ u32 offset;
-+
-+ /* follow the exact sequence to clear the registers */
-+ /* Clear EPACRn */
-+ for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE)
-+ out_be32(epu_base + offset, 0);
-+
-+ /* Clear EPEVTCRn */
-+ for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE)
-+ out_be32(epu_base + offset, 0);
-+
-+ /* Clear EPGCR */
-+ out_be32(epu_base + EPGCR, 0);
-+
-+ /* Clear EPSMCRn */
-+ for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE)
-+ out_be32(epu_base + offset, 0);
-+
-+ /* Clear EPCCRn */
-+ for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE)
-+ out_be32(epu_base + offset, 0);
-+
-+ /* Clear EPCMPRn */
-+ for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE)
-+ out_be32(epu_base + offset, 0);
-+
-+ /* Clear EPCTRn */
-+ for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE)
-+ out_be32(epu_base + offset, 0);
-+
-+ /* Clear EPIMCRn */
-+ for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE)
-+ out_be32(epu_base + offset, 0);
-+
-+ /* Clear EPXTRIGCRn */
-+ out_be32(epu_base + EPXTRIGCR, 0);
-+
-+ /* Clear EPECRn */
-+ for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE)
-+ out_be32(epu_base + offset, 0);
-+}
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.h u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.h 2015-01-01 17:34:32.009507252 +0100
-@@ -0,0 +1,68 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __FSL_EPU_H
-+#define __FSL_EPU_H
-+
-+#include <asm/types.h>
-+
-+#define FSL_STRIDE_4B 4
-+#define FSL_STRIDE_8B 8
-+
-+/* Block offsets */
-+#define EPU_BLOCK_OFFSET 0x00000000
-+
-+/* EPGCR (Event Processor Global Control Register) */
-+#define EPGCR 0x000
-+
-+/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */
-+#define EPEVTCR0 0x050
-+#define EPEVTCR9 0x074
-+#define EPEVTCR_STRIDE FSL_STRIDE_4B
-+
-+/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
-+#define EPXTRIGCR 0x090
-+
-+/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */
-+#define EPIMCR0 0x100
-+#define EPIMCR31 0x17C
-+#define EPIMCR_STRIDE FSL_STRIDE_4B
-+
-+/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */
-+#define EPSMCR0 0x200
-+#define EPSMCR15 0x278
-+#define EPSMCR_STRIDE FSL_STRIDE_8B
-+
-+/* EPECR0-15 (Event Processor Event Control Registers) */
-+#define EPECR0 0x300
-+#define EPECR15 0x33C
-+#define EPECR_STRIDE FSL_STRIDE_4B
-+
-+/* EPACR0-15 (Event Processor Action Control Registers) */
-+#define EPACR0 0x400
-+#define EPACR15 0x43C
-+#define EPACR_STRIDE FSL_STRIDE_4B
-+
-+/* EPCCRi0-15 (Event Processor Counter Control Registers) */
-+#define EPCCR0 0x800
-+#define EPCCR15 0x83C
-+#define EPCCR31 0x87C
-+#define EPCCR_STRIDE FSL_STRIDE_4B
-+
-+/* EPCMPR0-15 (Event Processor Counter Compare Registers) */
-+#define EPCMPR0 0x900
-+#define EPCMPR15 0x93C
-+#define EPCMPR31 0x97C
-+#define EPCMPR_STRIDE FSL_STRIDE_4B
-+
-+/* EPCTR0-31 (Event Processor Counter Register) */
-+#define EPCTR0 0xA00
-+#define EPCTR31 0xA7C
-+#define EPCTR_STRIDE FSL_STRIDE_4B
-+
-+void fsl_epu_clean(void *epu_base);
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/Makefile u-boot/arch/arm/cpu/armv7/ls102xa/Makefile
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/ls102xa/Makefile 2015-01-01 17:34:32.009507252 +0100
-@@ -7,6 +7,8 @@
- obj-y += cpu.o
- obj-y += clock.o
- obj-y += timer.o
-+obj-y += fsl_epu.o
-
- obj-$(CONFIG_OF_LIBFDT) += fdt.o
- obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
-+obj-$(CONFIG_SPL) += spl.o
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/spl.c u-boot/arch/arm/cpu/armv7/ls102xa/spl.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/spl.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/ls102xa/spl.c 2015-01-01 17:34:32.009507252 +0100
-@@ -0,0 +1,33 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <spl.h>
-+
-+u32 spl_boot_device(void)
-+{
-+#ifdef CONFIG_SPL_MMC_SUPPORT
-+ return BOOT_DEVICE_MMC1;
-+#endif
-+ return BOOT_DEVICE_NAND;
-+}
-+
-+u32 spl_boot_mode(void)
-+{
-+ switch (spl_boot_device()) {
-+ case BOOT_DEVICE_MMC1:
-+#ifdef CONFIG_SPL_FAT_SUPPORT
-+ return MMCSD_MODE_FAT;
-+#else
-+ return MMCSD_MODE_RAW;
-+#endif
-+ case BOOT_DEVICE_NAND:
-+ return 0;
-+ default:
-+ puts("spl: error: unsupported device\n");
-+ hang();
-+ }
-+}
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/Makefile u-boot/arch/arm/cpu/armv7/Makefile
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/Makefile 2015-01-01 17:34:32.001507383 +0100
-@@ -56,6 +56,7 @@
- obj-$(CONFIG_RMOBILE) += rmobile/
- obj-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx/
- obj-$(CONFIG_SOCFPGA) += socfpga/
-+obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
- obj-$(CONFIG_ARCH_SUNXI) += sunxi/
- obj-$(CONFIG_TEGRA20) += tegra20/
- obj-$(CONFIG_U8500) += u8500/
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/mx6/clock.c u-boot/arch/arm/cpu/armv7/mx6/clock.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/mx6/clock.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/mx6/clock.c 2015-01-01 17:34:32.009507252 +0100
-@@ -443,7 +443,7 @@
- struct anatop_regs __iomem *anatop =
- (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
-
-- if (freq < ENET_25MHz || freq > ENET_125MHz)
-+ if (freq < ENET_25MHZ || freq > ENET_125MHZ)
- return -EINVAL;
-
- reg = readl(&anatop->pll_enet);
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/nonsec_virt.S u-boot/arch/arm/cpu/armv7/nonsec_virt.S
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/nonsec_virt.S 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/nonsec_virt.S 2015-01-01 17:34:32.013507186 +0100
-@@ -169,11 +169,11 @@
- * we do this here instead.
- * But first check if we have the generic timer.
- */
--#ifdef CONFIG_SYS_CLK_FREQ
-+#ifdef CONFIG_TIMER_CLK_FREQ
- mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1
- and r0, r0, #CPUID_ARM_GENTIMER_MASK @ mask arch timer bits
- cmp r0, #(1 << CPUID_ARM_GENTIMER_SHIFT)
-- ldreq r1, =CONFIG_SYS_CLK_FREQ
-+ ldreq r1, =CONFIG_TIMER_CLK_FREQ
- mcreq p15, 0, r1, c14, c0, 0 @ write CNTFRQ
- #endif
-
-@@ -191,6 +191,9 @@
- wfi
- ldr r1, =CONFIG_SMP_PEN_ADDR @ load start address
- ldr r1, [r1]
-+#ifdef CONFIG_PEN_ADDR_BIG_ENDIAN
-+ rev r1, r1
-+#endif
- cmp r0, r1 @ make sure we dont execute this code
- beq smp_waitloop @ again (due to a spurious wakeup)
- mov r0, r1
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/freeze_controller.c u-boot/arch/arm/cpu/armv7/socfpga/freeze_controller.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/freeze_controller.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/socfpga/freeze_controller.c 2015-01-01 17:34:32.021507054 +0100
-@@ -38,8 +38,7 @@
- /* Freeze channel 0 to 2 */
- for (channel_id = 0; channel_id <= 2; channel_id++) {
- ioctrl_reg_offset = (u32)(
-- &freeze_controller_base->vioctrl +
-- (channel_id << SYSMGR_FRZCTRL_VIOCTRL_SHIFT));
-+ &freeze_controller_base->vioctrl + channel_id);
-
- /*
- * Assert active low enrnsl, plniotri
-@@ -120,8 +119,7 @@
- /* Thaw channel 0 to 2 */
- for (channel_id = 0; channel_id <= 2; channel_id++) {
- ioctrl_reg_offset
-- = (u32)(&freeze_controller_base->vioctrl
-- + (channel_id << SYSMGR_FRZCTRL_VIOCTRL_SHIFT));
-+ = (u32)(&freeze_controller_base->vioctrl + channel_id);
-
- /*
- * Assert active low bhniotri signal and
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/reset_manager.c u-boot/arch/arm/cpu/armv7/socfpga/reset_manager.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/reset_manager.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/socfpga/reset_manager.c 2015-01-01 17:34:32.021507054 +0100
-@@ -110,6 +110,6 @@
- {
- const void *reset = &reset_manager_base->per_mod_reset;
-
-- clrbits_le32(reset, 1 << RSTMGR_PERMODRST_SPIM0_LSB);
-- clrbits_le32(reset, 1 << RSTMGR_PERMODRST_SPIM1_LSB);
-+ clrbits_le32(reset, (1 << RSTMGR_PERMODRST_SPIM0_LSB) |
-+ (1 << RSTMGR_PERMODRST_SPIM1_LSB));
- }
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/clock.c u-boot/arch/arm/cpu/armv7/stv0991/clock.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/clock.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/stv0991/clock.c 2015-01-01 17:34:32.025506990 +0100
-@@ -0,0 +1,41 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <asm/io.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/stv0991_cgu.h>
-+#include<asm/arch/stv0991_periph.h>
-+
-+static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
-+ (struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
-+
-+void enable_pll1(void)
-+{
-+ /* pll1 already configured for 1000Mhz, just need to enable it */
-+ writel(readl(&stv0991_cgu_regs->pll1_ctrl) & ~(0x01),
-+ &stv0991_cgu_regs->pll1_ctrl);
-+}
-+
-+void clock_setup(int peripheral)
-+{
-+ switch (peripheral) {
-+ case UART_CLOCK_CFG:
-+ writel(UART_CLK_CFG, &stv0991_cgu_regs->uart_freq);
-+ break;
-+ case ETH_CLOCK_CFG:
-+ enable_pll1();
-+ writel(ETH_CLK_CFG, &stv0991_cgu_regs->eth_freq);
-+
-+ /* Clock selection for ethernet tx_clk & rx_clk*/
-+ writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK)
-+ | ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl);
-+
-+ break;
-+ default:
-+ break;
-+ }
-+}
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/lowlevel.S u-boot/arch/arm/cpu/armv7/stv0991/lowlevel.S
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/lowlevel.S 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/stv0991/lowlevel.S 2015-01-01 17:34:32.025506990 +0100
-@@ -0,0 +1,12 @@
-+/*
-+ * (C) Copyright 2014 stmicroelectronics
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <config.h>
-+#include <linux/linkage.h>
-+
-+ENTRY(lowlevel_init)
-+ mov pc, lr
-+ENDPROC(lowlevel_init)
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/Makefile u-boot/arch/arm/cpu/armv7/stv0991/Makefile
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/stv0991/Makefile 2015-01-01 17:34:32.025506990 +0100
-@@ -0,0 +1,9 @@
-+#
-+# (C) Copyright 2014
-+# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+obj-y := timer.o clock.o pinmux.o reset.o
-+obj-y += lowlevel.o
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/pinmux.c u-boot/arch/arm/cpu/armv7/stv0991/pinmux.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/pinmux.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/stv0991/pinmux.c 2015-01-01 17:34:32.025506990 +0100
-@@ -0,0 +1,62 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <asm/io.h>
-+#include <asm/arch/stv0991_creg.h>
-+#include <asm/arch/stv0991_periph.h>
-+#include <asm/arch/hardware.h>
-+
-+static struct stv0991_creg *const stv0991_creg = \
-+ (struct stv0991_creg *)CREG_BASE_ADDR;
-+
-+int stv0991_pinmux_config(int peripheral)
-+{
-+ switch (peripheral) {
-+ case UART_GPIOC_30_31:
-+ /* SSDA/SSCL pad muxing to UART Rx/Dx */
-+ writel((readl(&stv0991_creg->mux12) & GPIOC_31_MUX_MASK) |
-+ CFG_GPIOC_31_UART_RX,
-+ &stv0991_creg->mux12);
-+ writel((readl(&stv0991_creg->mux12) & GPIOC_30_MUX_MASK) |
-+ CFG_GPIOC_30_UART_TX,
-+ &stv0991_creg->mux12);
-+ /* SSDA/SSCL pad config to push pull*/
-+ writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_31_MODE_MASK) |
-+ CFG_GPIOC_31_MODE_PP,
-+ &stv0991_creg->cfg_pad6);
-+ writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_30_MODE_MASK) |
-+ CFG_GPIOC_30_MODE_HIGH,
-+ &stv0991_creg->cfg_pad6);
-+ break;
-+ case UART_GPIOB_16_17:
-+ /* ethernet rx_6/7 to UART Rx/Dx */
-+ writel((readl(&stv0991_creg->mux7) & GPIOB_17_MUX_MASK) |
-+ CFG_GPIOB_17_UART_RX,
-+ &stv0991_creg->mux7);
-+ writel((readl(&stv0991_creg->mux7) & GPIOB_16_MUX_MASK) |
-+ CFG_GPIOB_16_UART_TX,
-+ &stv0991_creg->mux7);
-+ break;
-+ case ETH_GPIOB_10_31_C_0_4:
-+ writel(readl(&stv0991_creg->mux6) & 0x000000FF,
-+ &stv0991_creg->mux6);
-+ writel(0x00000000, &stv0991_creg->mux7);
-+ writel(0x00000000, &stv0991_creg->mux8);
-+ writel(readl(&stv0991_creg->mux9) & 0xFFF00000,
-+ &stv0991_creg->mux9);
-+ /* Ethernet Voltage configuration to 1.8V*/
-+ writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) |
-+ ETH_VDD_CFG, &stv0991_creg->vdd_pad1);
-+ writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) |
-+ ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1);
-+
-+ break;
-+ default:
-+ break;
-+ }
-+ return 0;
-+}
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/reset.c u-boot/arch/arm/cpu/armv7/stv0991/reset.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/reset.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/stv0991/reset.c 2015-01-01 17:34:32.025506990 +0100
-@@ -0,0 +1,26 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/stv0991_wdru.h>
-+void reset_cpu(ulong ignored)
-+{
-+ puts("System is going to reboot ...\n");
-+ /*
-+ * This 1 second delay will allow the above message
-+ * to be printed before reset
-+ */
-+ udelay((1000 * 1000));
-+
-+ /* Setting bit 1 of the WDRU unit will reset the SoC */
-+ writel(WDRU_RST_SYS, &stv0991_wd_ru_ptr->wdru_ctrl1);
-+
-+ /* system will restart */
-+ while (1)
-+ ;
-+}
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/timer.c u-boot/arch/arm/cpu/armv7/stv0991/timer.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/timer.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/stv0991/timer.c 2015-01-01 17:34:32.025506990 +0100
-@@ -0,0 +1,114 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch-stv0991/hardware.h>
-+#include <asm/arch-stv0991/stv0991_cgu.h>
-+#include <asm/arch-stv0991/stv0991_gpt.h>
-+
-+static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
-+ (struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
-+
-+#define READ_TIMER() (readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
-+#define GPT_RESOLUTION (CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ)
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#define timestamp gd->arch.tbl
-+#define lastdec gd->arch.lastinc
-+
-+int timer_init(void)
-+{
-+ /* Timer1 clock configuration */
-+ writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq);
-+ writel(readl(&stv0991_cgu_regs->cgu_enable_2) |
-+ TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2);
-+
-+ /* Stop the timer */
-+ writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
-+ writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc);
-+ /* Configure timer for auto-reload */
-+ writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD,
-+ &gpt1_regs_ptr->cr1);
-+
-+ /* load value for free running */
-+ writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr);
-+
-+ /* start timer */
-+ writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN,
-+ &gpt1_regs_ptr->cr1);
-+
-+ /* Reset the timer */
-+ lastdec = READ_TIMER();
-+ timestamp = 0;
-+
-+ return 0;
-+}
-+
-+/*
-+ * timer without interrupts
-+ */
-+ulong get_timer(ulong base)
-+{
-+ return (get_timer_masked() / GPT_RESOLUTION) - base;
-+}
-+
-+void __udelay(unsigned long usec)
-+{
-+ ulong tmo;
-+ ulong start = get_timer_masked();
-+ ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100);
-+ ulong rndoff;
-+
-+ rndoff = (usec % 10) ? 1 : 0;
-+
-+ /* tenudelcnt timer tick gives 10 microsecconds delay */
-+ tmo = ((usec / 10) + rndoff) * tenudelcnt;
-+
-+ while ((ulong) (get_timer_masked() - start) < tmo)
-+ ;
-+}
-+
-+ulong get_timer_masked(void)
-+{
-+ ulong now = READ_TIMER();
-+
-+ if (now >= lastdec) {
-+ /* normal mode */
-+ timestamp += now - lastdec;
-+ } else {
-+ /* we have an overflow ... */
-+ timestamp += now + GPT_FREE_RUNNING - lastdec;
-+ }
-+ lastdec = now;
-+
-+ return timestamp;
-+}
-+
-+void udelay_masked(unsigned long usec)
-+{
-+ return udelay(usec);
-+}
-+
-+/*
-+ * This function is derived from PowerPC code (read timebase as long long).
-+ * On ARM it just returns the timer value.
-+ */
-+unsigned long long get_ticks(void)
-+{
-+ return get_timer(0);
-+}
-+
-+/*
-+ * This function is derived from PowerPC code (timebase clock frequency).
-+ * On ARM it returns the number of timer ticks per second.
-+ */
-+ulong get_tbclk(void)
-+{
-+ return CONFIG_STV0991_HZ;
-+}
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/tegra124/Kconfig u-boot/arch/arm/cpu/armv7/tegra124/Kconfig
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/tegra124/Kconfig 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/tegra124/Kconfig 2015-01-01 17:34:32.025506990 +0100
-@@ -6,6 +6,15 @@
- config TARGET_JETSON_TK1
- bool "NVIDIA Tegra124 Jetson TK1 board"
-
-+config TARGET_NYAN_BIG
-+ bool "Google/NVIDIA Nyan-big Chrombook"
-+ help
-+ Nyan Big is a Tegra124 clamshell board that is very similar
-+ to venice2, but it has a different panel, the sdcard CD and WP
-+ sense are flipped, and it has a different revision of the AS3722
-+ PMIC. The retail name is the Acer Chromebook 13 CB5-311-T7NN
-+ (13.3-inch HD, NVIDIA Tegra K1, 2GB).
-+
- config TARGET_VENICE2
- bool "NVIDIA Tegra124 Venice2"
-
-@@ -15,6 +24,7 @@
- default "tegra124"
-
- source "board/nvidia/jetson-tk1/Kconfig"
-+source "board/nvidia/nyan-big/Kconfig"
- source "board/nvidia/venice2/Kconfig"
-
- endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/uniphier/init_page_table.c u-boot/arch/arm/cpu/armv7/uniphier/init_page_table.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/uniphier/init_page_table.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/uniphier/init_page_table.c 2015-01-01 17:34:32.029506924 +0100
-@@ -17,11 +17,7 @@
- #define REG DEVICE /* IO Register: Device */
- #define DDR DEVICE /* DDR SDRAM: Device */
-
--#ifdef CONFIG_SPL_BUILD
- #define IS_SPL_TEXT_AREA(x) ((x) == ((CONFIG_SPL_TEXT_BASE) >> 20))
--#else
--#define IS_SPL_TEXT_AREA(x) ((x) == ((CONFIG_SYS_TEXT_BASE) >> 20))
--#endif
-
- #define IS_INIT_STACK_AREA(x) ((x) == ((CONFIG_SYS_INIT_SP_ADDR) >> 20))
-
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/vf610/generic.c u-boot/arch/arm/cpu/armv7/vf610/generic.c
---- u-boot-2015.01-rc3/arch/arm/cpu/armv7/vf610/generic.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/armv7/vf610/generic.c 2015-01-01 17:34:32.029506924 +0100
-@@ -265,20 +265,21 @@
-
- cause = readl(&src_regs->srsr);
- writel(cause, &src_regs->srsr);
-- cause &= 0xff;
-
-- switch (cause) {
-- case 0x08:
-- return "WDOG";
-- case 0x20:
-+ if (cause & SRC_SRSR_POR_RST)
-+ return "POWER ON RESET";
-+ else if (cause & SRC_SRSR_WDOG_A5)
-+ return "WDOG A5";
-+ else if (cause & SRC_SRSR_WDOG_M4)
-+ return "WDOG M4";
-+ else if (cause & SRC_SRSR_JTAG_RST)
- return "JTAG HIGH-Z";
-- case 0x80:
-+ else if (cause & SRC_SRSR_SW_RST)
-+ return "SW RESET";
-+ else if (cause & SRC_SRSR_RESETB)
- return "EXTERNAL RESET";
-- case 0xfd:
-- return "POR";
-- default:
-+ else
- return "unknown reset";
-- }
- }
-
- int print_cpuinfo(void)
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/tegra20-common/pmu.c u-boot/arch/arm/cpu/tegra20-common/pmu.c
---- u-boot-2015.01-rc3/arch/arm/cpu/tegra20-common/pmu.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/tegra20-common/pmu.c 2015-01-01 17:34:32.037506793 +0100
-@@ -6,6 +6,7 @@
- */
-
- #include <common.h>
-+#include <i2c.h>
- #include <tps6586x.h>
- #include <asm/io.h>
- #include <asm/arch/tegra.h>
-@@ -23,9 +24,13 @@
- #define VDD_TRANSITION_STEP 0x06 /* 150mv */
- #define VDD_TRANSITION_RATE 0x06 /* 3.52mv/us */
-
-+#define PMI_I2C_ADDRESS 0x34 /* chip requires this address */
-+
- int pmu_set_nominal(void)
- {
-- int core, cpu, bus;
-+ struct udevice *bus, *dev;
-+ int core, cpu;
-+ int ret;
-
- /* by default, the table has been filled with T25 settings */
- switch (tegra_get_chip_sku()) {
-@@ -42,12 +47,18 @@
- return -1;
- }
-
-- bus = tegra_i2c_get_dvc_bus_num();
-- if (bus == -1) {
-+ ret = tegra_i2c_get_dvc_bus(&bus);
-+ if (ret) {
- debug("%s: Cannot find DVC I2C bus\n", __func__);
-- return -1;
-+ return ret;
- }
-- tps6586x_init(bus);
-+ ret = i2c_get_chip(bus, PMI_I2C_ADDRESS, &dev);
-+ if (ret) {
-+ debug("%s: Cannot find DVC I2C chip\n", __func__);
-+ return ret;
-+ }
-+
-+ tps6586x_init(dev);
- tps6586x_set_pwm_mode(TPS6586X_PWM_SM1);
- return tps6586x_adjust_sm0_sm1(core, cpu, VDD_TRANSITION_STEP,
- VDD_TRANSITION_RATE, VDD_RELATION);
-diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/u-boot-spl.lds u-boot/arch/arm/cpu/u-boot-spl.lds
---- u-boot-2015.01-rc3/arch/arm/cpu/u-boot-spl.lds 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/cpu/u-boot-spl.lds 2015-01-01 17:34:32.037506793 +0100
-@@ -32,6 +32,9 @@
- }
-
- . = ALIGN(4);
-+ .u_boot_list : {
-+ KEEP(*(SORT(.u_boot_list*_i2c_*)));
-+ }
-
- . = .;
- #ifdef CONFIG_SPL_DM
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/cros-ec-keyboard.dtsi u-boot/arch/arm/dts/cros-ec-keyboard.dtsi
---- u-boot-2015.01-rc3/arch/arm/dts/cros-ec-keyboard.dtsi 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/dts/cros-ec-keyboard.dtsi 2015-01-01 17:34:32.037506793 +0100
-@@ -0,0 +1,105 @@
-+/*
-+ * Keyboard dts fragment for devices that use cros-ec-keyboard
-+ *
-+ * Copyright (c) 2014 Google, Inc
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+*/
-+
-+#include <dt-bindings/input/input.h>
-+
-+&cros_ec {
-+ keyboard-controller {
-+ compatible = "google,cros-ec-keyb";
-+ keypad,num-rows = <8>;
-+ keypad,num-columns = <13>;
-+ google,needs-ghost-filter;
-+
-+ linux,keymap = <
-+ MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
-+ MATRIX_KEY(0x00, 0x02, KEY_F1)
-+ MATRIX_KEY(0x00, 0x03, KEY_B)
-+ MATRIX_KEY(0x00, 0x04, KEY_F10)
-+ MATRIX_KEY(0x00, 0x06, KEY_N)
-+ MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
-+ MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
-+
-+ MATRIX_KEY(0x01, 0x01, KEY_ESC)
-+ MATRIX_KEY(0x01, 0x02, KEY_F4)
-+ MATRIX_KEY(0x01, 0x03, KEY_G)
-+ MATRIX_KEY(0x01, 0x04, KEY_F7)
-+ MATRIX_KEY(0x01, 0x06, KEY_H)
-+ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
-+ MATRIX_KEY(0x01, 0x09, KEY_F9)
-+ MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
-+
-+ MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
-+ MATRIX_KEY(0x02, 0x01, KEY_TAB)
-+ MATRIX_KEY(0x02, 0x02, KEY_F3)
-+ MATRIX_KEY(0x02, 0x03, KEY_T)
-+ MATRIX_KEY(0x02, 0x04, KEY_F6)
-+ MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
-+ MATRIX_KEY(0x02, 0x06, KEY_Y)
-+ MATRIX_KEY(0x02, 0x07, KEY_102ND)
-+ MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
-+ MATRIX_KEY(0x02, 0x09, KEY_F8)
-+
-+ MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
-+ MATRIX_KEY(0x03, 0x02, KEY_F2)
-+ MATRIX_KEY(0x03, 0x03, KEY_5)
-+ MATRIX_KEY(0x03, 0x04, KEY_F5)
-+ MATRIX_KEY(0x03, 0x06, KEY_6)
-+ MATRIX_KEY(0x03, 0x08, KEY_MINUS)
-+ MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
-+
-+ MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
-+ MATRIX_KEY(0x04, 0x01, KEY_A)
-+ MATRIX_KEY(0x04, 0x02, KEY_D)
-+ MATRIX_KEY(0x04, 0x03, KEY_F)
-+ MATRIX_KEY(0x04, 0x04, KEY_S)
-+ MATRIX_KEY(0x04, 0x05, KEY_K)
-+ MATRIX_KEY(0x04, 0x06, KEY_J)
-+ MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
-+ MATRIX_KEY(0x04, 0x09, KEY_L)
-+ MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
-+ MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
-+
-+ MATRIX_KEY(0x05, 0x01, KEY_Z)
-+ MATRIX_KEY(0x05, 0x02, KEY_C)
-+ MATRIX_KEY(0x05, 0x03, KEY_V)
-+ MATRIX_KEY(0x05, 0x04, KEY_X)
-+ MATRIX_KEY(0x05, 0x05, KEY_COMMA)
-+ MATRIX_KEY(0x05, 0x06, KEY_M)
-+ MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
-+ MATRIX_KEY(0x05, 0x08, KEY_SLASH)
-+ MATRIX_KEY(0x05, 0x09, KEY_DOT)
-+ MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
-+
-+ MATRIX_KEY(0x06, 0x01, KEY_1)
-+ MATRIX_KEY(0x06, 0x02, KEY_3)
-+ MATRIX_KEY(0x06, 0x03, KEY_4)
-+ MATRIX_KEY(0x06, 0x04, KEY_2)
-+ MATRIX_KEY(0x06, 0x05, KEY_8)
-+ MATRIX_KEY(0x06, 0x06, KEY_7)
-+ MATRIX_KEY(0x06, 0x08, KEY_0)
-+ MATRIX_KEY(0x06, 0x09, KEY_9)
-+ MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
-+ MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
-+ MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
-+
-+ MATRIX_KEY(0x07, 0x01, KEY_Q)
-+ MATRIX_KEY(0x07, 0x02, KEY_E)
-+ MATRIX_KEY(0x07, 0x03, KEY_R)
-+ MATRIX_KEY(0x07, 0x04, KEY_W)
-+ MATRIX_KEY(0x07, 0x05, KEY_I)
-+ MATRIX_KEY(0x07, 0x06, KEY_U)
-+ MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
-+ MATRIX_KEY(0x07, 0x08, KEY_P)
-+ MATRIX_KEY(0x07, 0x09, KEY_O)
-+ MATRIX_KEY(0x07, 0x0b, KEY_UP)
-+ MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
-+ >;
-+ };
-+};
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/arm/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/arm/dts/include/dt-bindings/reset/altr,rst-mgr.h
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/Makefile u-boot/arch/arm/dts/Makefile
---- u-boot-2015.01-rc3/arch/arm/dts/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/Makefile 2015-01-01 17:34:32.037506793 +0100
-@@ -31,6 +31,7 @@
- tegra30-tec-ng.dtb \
- tegra114-dalmore.dtb \
- tegra124-jetson-tk1.dtb \
-+ tegra124-nyan-big.dtb \
- tegra124-venice2.dtb
- dtb-$(CONFIG_ARCH_UNIPHIER) += \
- uniphier-ph1-sld3-ref.dtb \
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5.dtsi u-boot/arch/arm/dts/socfpga_cyclone5.dtsi
---- u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5.dtsi 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/socfpga_cyclone5.dtsi 2015-01-01 17:34:32.041506727 +0100
-@@ -1,18 +1,7 @@
- /*
- * Copyright (C) 2012 Altera Corporation <www.altera.com>
- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program. If not, see <http://www.gnu.org/licenses/>.
-+ * SPDX-License-Identifier: GPL-2.0+
- */
-
- /dts-v1/;
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5_socrates.dts u-boot/arch/arm/dts/socfpga_cyclone5_socrates.dts
---- u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5_socrates.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/socfpga_cyclone5_socrates.dts 2015-01-01 17:34:32.041506727 +0100
-@@ -1,18 +1,7 @@
- /*
- * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program. If not, see <http://www.gnu.org/licenses/>.
-+ * SPDX-License-Identifier: GPL-2.0+
- */
-
- #include "socfpga_cyclone5.dtsi"
-@@ -25,6 +14,12 @@
- bootargs = "console=ttyS0,115200";
- };
-
-+ aliases {
-+ spi0 = "/spi@ff705000"; /* QSPI */
-+ spi1 = "/spi@fff00000";
-+ spi2 = "/spi@fff01000";
-+ };
-+
- memory {
- name = "memory";
- device_type = "memory";
-@@ -48,3 +43,23 @@
- &mmc {
- status = "okay";
- };
-+
-+&qspi {
-+ status = "okay";
-+
-+ flash0: n25q00@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "n25q00";
-+ reg = <0>; /* chip select */
-+ spi-max-frequency = <50000000>;
-+ m25p,fast-read;
-+ page-size = <256>;
-+ block-size = <16>; /* 2^16, 64KB */
-+ read-delay = <4>; /* delay value in read data capture register */
-+ tshsl-ns = <50>;
-+ tsd2d-ns = <50>;
-+ tchsh-ns = <4>;
-+ tslch-ns = <4>;
-+ };
-+};
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/socfpga.dtsi u-boot/arch/arm/dts/socfpga.dtsi
---- u-boot-2015.01-rc3/arch/arm/dts/socfpga.dtsi 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/socfpga.dtsi 2015-01-01 17:34:32.041506727 +0100
-@@ -1,18 +1,7 @@
- /*
- * Copyright (C) 2012 Altera <www.altera.com>
- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program. If not, see <http://www.gnu.org/licenses/>.
-+ * SPDX-License-Identifier: GPL-2.0+
- */
-
- #include "skeleton.dtsi"
-@@ -639,6 +628,49 @@
- clock-names = "biu", "ciu";
- };
-
-+ qspi: spi@ff705000 {
-+ compatible = "cadence,qspi";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0xff705000 0x1000>,
-+ <0xffa00000 0x1000>;
-+ interrupts = <0 151 4>;
-+ clocks = <&qspi_clk>;
-+ ext-decoder = <0>; /* external decoder */
-+ num-chipselect = <4>;
-+ fifo-depth = <128>;
-+ bus-num = <2>;
-+ status = "disabled";
-+ };
-+
-+ spi0: spi@fff00000 {
-+ compatible = "snps,dw-spi-mmio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0xfff00000 0x1000>;
-+ interrupts = <0 154 4>;
-+ num-chipselect = <4>;
-+ bus-num = <0>;
-+ tx-dma-channel = <&pdma 16>;
-+ rx-dma-channel = <&pdma 17>;
-+ clocks = <&per_base_clk>;
-+ status = "disabled";
-+ };
-+
-+ spi1: spi@fff01000 {
-+ compatible = "snps,dw-spi-mmio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0xfff01000 0x1000>;
-+ interrupts = <0 156 4>;
-+ num-chipselect = <4>;
-+ bus-num = <1>;
-+ tx-dma-channel = <&pdma 20>;
-+ rx-dma-channel = <&pdma 21>;
-+ clocks = <&per_base_clk>;
-+ status = "disabled";
-+ };
-+
- /* Local timer */
- timer@fffec600 {
- compatible = "arm,cortex-a9-twd-timer";
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra124.dtsi u-boot/arch/arm/dts/tegra124.dtsi
---- u-boot-2015.01-rc3/arch/arm/dts/tegra124.dtsi 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/tegra124.dtsi 2015-01-01 17:34:32.041506727 +0100
-@@ -1,5 +1,6 @@
- #include <dt-bindings/clock/tegra124-car.h>
- #include <dt-bindings/gpio/tegra-gpio.h>
-+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-
- #include "skeleton.dtsi"
-@@ -192,6 +193,16 @@
- status = "disabled";
- };
-
-+ pwm: pwm@7000a000 {
-+ compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
-+ reg = <0x7000a000 0x100>;
-+ #pwm-cells = <2>;
-+ clocks = <&tegra_car TEGRA124_CLK_PWM>;
-+ resets = <&tegra_car 17>;
-+ reset-names = "pwm";
-+ status = "disabled";
-+ };
-+
- spi@7000d400 {
- compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
- reg = <0x7000d400 0x200>;
-@@ -290,6 +301,109 @@
- status = "disabled";
- };
-
-+ ahub@70300000 {
-+ compatible = "nvidia,tegra124-ahub";
-+ reg = <0x70300000 0x200>,
-+ <0x70300800 0x800>,
-+ <0x70300200 0x600>;
-+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
-+ <&tegra_car TEGRA124_CLK_APBIF>;
-+ clock-names = "d_audio", "apbif";
-+ resets = <&tegra_car 106>, /* d_audio */
-+ <&tegra_car 107>, /* apbif */
-+ <&tegra_car 30>, /* i2s0 */
-+ <&tegra_car 11>, /* i2s1 */
-+ <&tegra_car 18>, /* i2s2 */
-+ <&tegra_car 101>, /* i2s3 */
-+ <&tegra_car 102>, /* i2s4 */
-+ <&tegra_car 108>, /* dam0 */
-+ <&tegra_car 109>, /* dam1 */
-+ <&tegra_car 110>, /* dam2 */
-+ <&tegra_car 10>, /* spdif */
-+ <&tegra_car 153>, /* amx */
-+ <&tegra_car 185>, /* amx1 */
-+ <&tegra_car 154>, /* adx */
-+ <&tegra_car 180>, /* adx1 */
-+ <&tegra_car 186>, /* afc0 */
-+ <&tegra_car 187>, /* afc1 */
-+ <&tegra_car 188>, /* afc2 */
-+ <&tegra_car 189>, /* afc3 */
-+ <&tegra_car 190>, /* afc4 */
-+ <&tegra_car 191>; /* afc5 */
-+ reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
-+ "i2s3", "i2s4", "dam0", "dam1", "dam2",
-+ "spdif", "amx", "amx1", "adx", "adx1",
-+ "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
-+ dmas = <&apbdma 1>, <&apbdma 1>,
-+ <&apbdma 2>, <&apbdma 2>,
-+ <&apbdma 3>, <&apbdma 3>,
-+ <&apbdma 4>, <&apbdma 4>,
-+ <&apbdma 6>, <&apbdma 6>,
-+ <&apbdma 7>, <&apbdma 7>,
-+ <&apbdma 12>, <&apbdma 12>,
-+ <&apbdma 13>, <&apbdma 13>,
-+ <&apbdma 14>, <&apbdma 14>,
-+ <&apbdma 29>, <&apbdma 29>;
-+ dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
-+ "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
-+ "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
-+ "rx9", "tx9";
-+ ranges;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ tegra_i2s0: i2s@70301000 {
-+ compatible = "nvidia,tegra124-i2s";
-+ reg = <0x70301000 0x100>;
-+ nvidia,ahub-cif-ids = <4 4>;
-+ clocks = <&tegra_car TEGRA124_CLK_I2S0>;
-+ resets = <&tegra_car 30>;
-+ reset-names = "i2s";
-+ status = "disabled";
-+ };
-+
-+ tegra_i2s1: i2s@70301100 {
-+ compatible = "nvidia,tegra124-i2s";
-+ reg = <0x70301100 0x100>;
-+ nvidia,ahub-cif-ids = <5 5>;
-+ clocks = <&tegra_car TEGRA124_CLK_I2S1>;
-+ resets = <&tegra_car 11>;
-+ reset-names = "i2s";
-+ status = "disabled";
-+ };
-+
-+ tegra_i2s2: i2s@70301200 {
-+ compatible = "nvidia,tegra124-i2s";
-+ reg = <0x70301200 0x100>;
-+ nvidia,ahub-cif-ids = <6 6>;
-+ clocks = <&tegra_car TEGRA124_CLK_I2S2>;
-+ resets = <&tegra_car 18>;
-+ reset-names = "i2s";
-+ status = "disabled";
-+ };
-+
-+ tegra_i2s3: i2s@70301300 {
-+ compatible = "nvidia,tegra124-i2s";
-+ reg = <0x70301300 0x100>;
-+ nvidia,ahub-cif-ids = <7 7>;
-+ clocks = <&tegra_car TEGRA124_CLK_I2S3>;
-+ resets = <&tegra_car 101>;
-+ reset-names = "i2s";
-+ status = "disabled";
-+ };
-+
-+ tegra_i2s4: i2s@70301400 {
-+ compatible = "nvidia,tegra124-i2s";
-+ reg = <0x70301400 0x100>;
-+ nvidia,ahub-cif-ids = <8 8>;
-+ clocks = <&tegra_car TEGRA124_CLK_I2S4>;
-+ resets = <&tegra_car 102>;
-+ reset-names = "i2s";
-+ status = "disabled";
-+ };
-+ };
-+
- usb@7d000000 {
- compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
- reg = <0x7d000000 0x4000>;
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra124-jetson-tk1.dts u-boot/arch/arm/dts/tegra124-jetson-tk1.dts
---- u-boot-2015.01-rc3/arch/arm/dts/tegra124-jetson-tk1.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/tegra124-jetson-tk1.dts 2015-01-01 17:34:32.041506727 +0100
-@@ -16,7 +16,6 @@
- i2c2 = "/i2c@7000c400";
- i2c3 = "/i2c@7000c500";
- i2c4 = "/i2c@7000c700";
-- i2c5 = "/i2c@7000d100";
- sdhci0 = "/sdhci@700b0600";
- sdhci1 = "/sdhci@700b0400";
- spi0 = "/spi@7000d400";
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra124-nyan-big.dts u-boot/arch/arm/dts/tegra124-nyan-big.dts
---- u-boot-2015.01-rc3/arch/arm/dts/tegra124-nyan-big.dts 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/dts/tegra124-nyan-big.dts 2015-01-01 17:34:32.041506727 +0100
-@@ -0,0 +1,365 @@
-+/dts-v1/;
-+
-+#include <dt-bindings/input/input.h>
-+#include "tegra124.dtsi"
-+
-+/ {
-+ model = "Acer Chromebook 13 CB5-311";
-+ compatible = "google,nyan-big", "nvidia,tegra124";
-+
-+ aliases {
-+ console = &uarta;
-+ i2c0 = "/i2c@7000d000";
-+ i2c1 = "/i2c@7000c000";
-+ i2c2 = "/i2c@7000c400";
-+ i2c3 = "/i2c@7000c500";
-+ i2c4 = "/i2c@7000c700";
-+ i2c5 = "/i2c@7000d100";
-+ rtc0 = "/i2c@0,7000d000/pmic@40";
-+ rtc1 = "/rtc@0,7000e000";
-+ sdhci0 = "/sdhci@700b0600";
-+ sdhci1 = "/sdhci@700b0400";
-+ spi0 = "/spi@7000d400";
-+ spi1 = "/spi@7000da00";
-+ usb0 = "/usb@7d000000";
-+ usb1 = "/usb@7d008000";
-+ };
-+
-+ memory {
-+ reg = <0x80000000 0x80000000>;
-+ };
-+
-+ serial@70006000 {
-+ /* Debug connector on the bottom of the board near SD card. */
-+ status = "okay";
-+ };
-+
-+ pwm@7000a000 {
-+ status = "okay";
-+ };
-+
-+ i2c@7000c000 {
-+ status = "okay";
-+ clock-frequency = <100000>;
-+
-+ acodec: audio-codec@10 {
-+ compatible = "maxim,max98090";
-+ reg = <0x10>;
-+ interrupt-parent = <&gpio>;
-+ interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ temperature-sensor@4c {
-+ compatible = "ti,tmp451";
-+ reg = <0x4c>;
-+ interrupt-parent = <&gpio>;
-+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-+
-+ #thermal-sensor-cells = <1>;
-+ };
-+ };
-+
-+ i2c@7000c400 {
-+ status = "okay";
-+ clock-frequency = <100000>;
-+ };
-+
-+ i2c@7000c500 {
-+ status = "okay";
-+ clock-frequency = <400000>;
-+
-+ tpm@20 {
-+ compatible = "infineon,slb9645tt";
-+ reg = <0x20>;
-+ };
-+ };
-+
-+ hdmi_ddc: i2c@7000c700 {
-+ status = "okay";
-+ clock-frequency = <100000>;
-+ };
-+
-+ i2c@7000d000 {
-+ status = "okay";
-+ clock-frequency = <400000>;
-+
-+ pmic: pmic@40 {
-+ compatible = "ams,as3722";
-+ reg = <0x40>;
-+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ ams,system-power-controller;
-+
-+ #interrupt-cells = <2>;
-+ interrupt-controller;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&as3722_default>;
-+
-+ as3722_default: pinmux {
-+ gpio0 {
-+ pins = "gpio0";
-+ function = "gpio";
-+ bias-pull-down;
-+ };
-+
-+ gpio1 {
-+ pins = "gpio1";
-+ function = "gpio";
-+ bias-pull-up;
-+ };
-+
-+ gpio2_4_7 {
-+ pins = "gpio2", "gpio4", "gpio7";
-+ function = "gpio";
-+ bias-pull-up;
-+ };
-+
-+ gpio3_6 {
-+ pins = "gpio3", "gpio6";
-+ bias-high-impedance;
-+ };
-+
-+ gpio5 {
-+ pins = "gpio5";
-+ function = "clk32k-out";
-+ bias-pull-down;
-+ };
-+ };
-+ };
-+ };
-+
-+ spi@7000d400 {
-+ status = "okay";
-+
-+ cros_ec: cros-ec@0 {
-+ compatible = "google,cros-ec-spi";
-+ spi-max-frequency = <3000000>;
-+ interrupt-parent = <&gpio>;
-+ interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
-+ reg = <0>;
-+
-+ google,cros-ec-spi-msg-delay = <2000>;
-+
-+ i2c-tunnel {
-+ compatible = "google,cros-ec-i2c-tunnel";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ google,remote-bus = <0>;
-+
-+ charger: bq24735@9 {
-+ compatible = "ti,bq24735";
-+ reg = <0x9>;
-+ interrupt-parent = <&gpio>;
-+ interrupts = <TEGRA_GPIO(J, 0)
-+ GPIO_ACTIVE_HIGH>;
-+ ti,ac-detect-gpios = <&gpio
-+ TEGRA_GPIO(J, 0)
-+ GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ battery: sbs-battery@b {
-+ compatible = "sbs,sbs-battery";
-+ reg = <0xb>;
-+ sbs,i2c-retry-count = <2>;
-+ sbs,poll-retry-count = <10>;
-+ power-supplies = <&charger>;
-+ };
-+ };
-+ };
-+ };
-+
-+ spi@7000da00 {
-+ status = "okay";
-+ spi-max-frequency = <25000000>;
-+
-+ flash@0 {
-+ compatible = "winbond,w25q32dw";
-+ reg = <0>;
-+ };
-+ };
-+
-+ pmc@7000e400 {
-+ nvidia,invert-interrupt;
-+ nvidia,suspend-mode = <0>;
-+ nvidia,cpu-pwr-good-time = <500>;
-+ nvidia,cpu-pwr-off-time = <300>;
-+ nvidia,core-pwr-good-time = <641 3845>;
-+ nvidia,core-pwr-off-time = <61036>;
-+ nvidia,core-power-req-active-high;
-+ nvidia,sys-clock-req-active-high;
-+ };
-+
-+ hda@70030000 {
-+ status = "okay";
-+ };
-+
-+ sdhci@700b0000 { /* WiFi/BT on this bus */
-+ status = "okay";
-+ power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
-+ bus-width = <4>;
-+ no-1-8-v;
-+ non-removable;
-+ };
-+
-+ sdhci@700b0400 { /* SD Card on this bus */
-+ status = "okay";
-+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-+ power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
-+ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-+ bus-width = <4>;
-+ no-1-8-v;
-+ };
-+
-+ sdhci@700b0600 { /* eMMC on this bus */
-+ status = "okay";
-+ bus-width = <8>;
-+ no-1-8-v;
-+ non-removable;
-+ };
-+
-+ ahub@70300000 {
-+ i2s@70301100 {
-+ status = "okay";
-+ };
-+ };
-+
-+ usb@7d000000 { /* Rear external USB port. */
-+ status = "okay";
-+ };
-+
-+ usb-phy@7d000000 {
-+ status = "okay";
-+ };
-+
-+ usb@7d004000 { /* Internal webcam. */
-+ status = "okay";
-+ };
-+
-+ usb-phy@7d004000 {
-+ status = "okay";
-+ };
-+
-+ usb@7d008000 { /* Left external USB port. */
-+ status = "okay";
-+ };
-+
-+ usb-phy@7d008000 {
-+ status = "okay";
-+ };
-+
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+
-+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-+ pwms = <&pwm 1 1000000>;
-+
-+ default-brightness-level = <224>;
-+ brightness-levels =
-+ < 0 1 2 3 4 5 6 7
-+ 8 9 10 11 12 13 14 15
-+ 16 17 18 19 20 21 22 23
-+ 24 25 26 27 28 29 30 31
-+ 32 33 34 35 36 37 38 39
-+ 40 41 42 43 44 45 46 47
-+ 48 49 50 51 52 53 54 55
-+ 56 57 58 59 60 61 62 63
-+ 64 65 66 67 68 69 70 71
-+ 72 73 74 75 76 77 78 79
-+ 80 81 82 83 84 85 86 87
-+ 88 89 90 91 92 93 94 95
-+ 96 97 98 99 100 101 102 103
-+ 104 105 106 107 108 109 110 111
-+ 112 113 114 115 116 117 118 119
-+ 120 121 122 123 124 125 126 127
-+ 128 129 130 131 132 133 134 135
-+ 136 137 138 139 140 141 142 143
-+ 144 145 146 147 148 149 150 151
-+ 152 153 154 155 156 157 158 159
-+ 160 161 162 163 164 165 166 167
-+ 168 169 170 171 172 173 174 175
-+ 176 177 178 179 180 181 182 183
-+ 184 185 186 187 188 189 190 191
-+ 192 193 194 195 196 197 198 199
-+ 200 201 202 203 204 205 206 207
-+ 208 209 210 211 212 213 214 215
-+ 216 217 218 219 220 221 222 223
-+ 224 225 226 227 228 229 230 231
-+ 232 233 234 235 236 237 238 239
-+ 240 241 242 243 244 245 246 247
-+ 248 249 250 251 252 253 254 255
-+ 256>;
-+ };
-+
-+ clocks {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ clk32k_in: clock@0 {
-+ compatible = "fixed-clock";
-+ reg = <0>;
-+ #clock-cells = <0>;
-+ clock-frequency = <32768>;
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+
-+ lid {
-+ label = "Lid";
-+ gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
-+ linux,input-type = <5>;
-+ linux,code = <KEY_RESERVED>;
-+ debounce-interval = <1>;
-+ gpio-key,wakeup;
-+ };
-+
-+ power {
-+ label = "Power";
-+ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_POWER>;
-+ debounce-interval = <30>;
-+ gpio-key,wakeup;
-+ };
-+ };
-+
-+ panel: panel {
-+ compatible = "auo,b133xtn01";
-+
-+ backlight = <&backlight>;
-+ };
-+
-+ sound {
-+ compatible = "nvidia,tegra-audio-max98090-nyan-big",
-+ "nvidia,tegra-audio-max98090";
-+ nvidia,model = "Acer Chromebook 13";
-+
-+ nvidia,audio-routing =
-+ "Headphones", "HPR",
-+ "Headphones", "HPL",
-+ "Speakers", "SPKR",
-+ "Speakers", "SPKL",
-+ "Mic Jack", "MICBIAS",
-+ "DMICL", "Int Mic",
-+ "DMICR", "Int Mic",
-+ "IN34", "Mic Jack";
-+
-+ nvidia,i2s-controller = <&tegra_i2s1>;
-+ nvidia,audio-codec = <&acodec>;
-+
-+ clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-+ <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-+ <&tegra_car TEGRA124_CLK_EXTERN1>;
-+ clock-names = "pll_a", "pll_a_out0", "mclk";
-+
-+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
-+ };
-+};
-+
-+#include "cros-ec-keyboard.dtsi"
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra30-tec-ng.dts u-boot/arch/arm/dts/tegra30-tec-ng.dts
---- u-boot-2015.01-rc3/arch/arm/dts/tegra30-tec-ng.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/tegra30-tec-ng.dts 2015-01-01 17:34:32.045506662 +0100
-@@ -6,6 +6,10 @@
- model = "Avionic Design Tamonten™ NG Evaluation Carrier";
- compatible = "ad,tec-ng", "nvidia,tegra30";
-
-+ aliases {
-+ i2c0 = "/i2c@7000c400";
-+ };
-+
- /* GEN2 */
- i2c@7000c400 {
- status = "okay";
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-ld4-ref.dts u-boot/arch/arm/dts/uniphier-ph1-ld4-ref.dts
---- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-ld4-ref.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/uniphier-ph1-ld4-ref.dts 2015-01-01 17:34:32.045506662 +0100
-@@ -25,10 +25,10 @@
- };
-
- aliases {
-- uart0 = &uart0;
-- uart1 = &uart1;
-- uart2 = &uart2;
-- uart3 = &uart3;
-+ serial0 = &uart0;
-+ serial1 = &uart1;
-+ serial2 = &uart2;
-+ serial3 = &uart3;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-pro4-ref.dts u-boot/arch/arm/dts/uniphier-ph1-pro4-ref.dts
---- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-pro4-ref.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/uniphier-ph1-pro4-ref.dts 2015-01-01 17:34:32.045506662 +0100
-@@ -25,10 +25,10 @@
- };
-
- aliases {
-- uart0 = &uart0;
-- uart1 = &uart1;
-- uart2 = &uart2;
-- uart3 = &uart3;
-+ serial0 = &uart0;
-+ serial1 = &uart1;
-+ serial2 = &uart2;
-+ serial3 = &uart3;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld3-ref.dts u-boot/arch/arm/dts/uniphier-ph1-sld3-ref.dts
---- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld3-ref.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/uniphier-ph1-sld3-ref.dts 2015-01-01 17:34:32.045506662 +0100
-@@ -25,9 +25,9 @@
- };
-
- aliases {
-- uart0 = &uart0;
-- uart1 = &uart1;
-- uart2 = &uart2;
-+ serial0 = &uart0;
-+ serial1 = &uart1;
-+ serial2 = &uart2;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
-diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld8-ref.dts u-boot/arch/arm/dts/uniphier-ph1-sld8-ref.dts
---- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld8-ref.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/dts/uniphier-ph1-sld8-ref.dts 2015-01-01 17:34:32.045506662 +0100
-@@ -25,10 +25,10 @@
- };
-
- aliases {
-- uart0 = &uart0;
-- uart1 = &uart1;
-- uart2 = &uart2;
-- uart3 = &uart3;
-+ serial0 = &uart0;
-+ serial1 = &uart1;
-+ serial2 = &uart2;
-+ serial3 = &uart3;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
-diff -ruN u-boot-2015.01-rc3/arch/arm/imx-common/cpu.c u-boot/arch/arm/imx-common/cpu.c
---- u-boot-2015.01-rc3/arch/arm/imx-common/cpu.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/imx-common/cpu.c 2015-01-01 17:34:32.045506662 +0100
-@@ -206,6 +206,9 @@
- {
- #if defined(CONFIG_CMD_SATA)
- sata_stop();
-+#if defined(CONFIG_MX6)
-+ disable_sata_clock();
-+#endif
- #endif
- #if defined(CONFIG_VIDEO_IPUV3)
- /* disable video before launching O/S */
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm281xx/sysmap.h u-boot/arch/arm/include/asm/arch-bcm281xx/sysmap.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm281xx/sysmap.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-bcm281xx/sysmap.h 2015-01-01 17:34:32.053506531 +0100
-@@ -13,6 +13,8 @@
- #define ESUB_CLK_BASE_ADDR 0x38000000
- #define ESW_CONTRL_BASE_ADDR 0x38200000
- #define GPIO2_BASE_ADDR 0x35003000
-+#define HSOTG_BASE_ADDR 0x3f120000
-+#define HSOTG_CTRL_BASE_ADDR 0x3f130000
- #define KONA_MST_CLK_BASE_ADDR 0x3f001000
- #define KONA_SLV_CLK_BASE_ADDR 0x3e011000
- #define PMU_BSC_BASE_ADDR 0x3500d000
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm2835/mbox.h u-boot/arch/arm/include/asm/arch-bcm2835/mbox.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm2835/mbox.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-bcm2835/mbox.h 2015-01-01 17:34:32.053506531 +0100
-@@ -140,6 +140,7 @@
- #define BCM2835_BOARD_REV_B_REV2_f 0xf
- #define BCM2835_BOARD_REV_B_PLUS 0x10
- #define BCM2835_BOARD_REV_CM 0x11
-+#define BCM2835_BOARD_REV_A_PLUS 0x12
-
- struct bcm2835_mbox_tag_get_board_rev {
- struct bcm2835_mbox_tag_hdr tag_hdr;
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/config.h u-boot/arch/arm/include/asm/arch-ls102xa/config.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/config.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-ls102xa/config.h 2015-01-01 17:34:32.065506333 +0100
-@@ -11,11 +11,17 @@
-
- #define OCRAM_BASE_ADDR 0x10000000
- #define OCRAM_SIZE 0x00020000
-+#define OCRAM_BASE_S_ADDR 0x10010000
-+#define OCRAM_S_SIZE 0x00010000
-
- #define CONFIG_SYS_IMMR 0x01000000
-+#define CONFIG_SYS_DCSRBAR 0x20000000
-+
-+#define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00220000)
-
- #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
- #define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000)
-+#define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000)
- #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
- #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
- #define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
-@@ -52,6 +58,9 @@
-
- #define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
-
-+#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
-+#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000)
-+
- #ifdef CONFIG_DDR_SPD
- #define CONFIG_SYS_FSL_DDR_BE
- #define CONFIG_VERY_BIG_RAM
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h u-boot/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h 2015-01-01 17:34:32.065506333 +0100
-@@ -17,6 +17,9 @@
- #define SOC_VER_LS1021 0x11
- #define SOC_VER_LS1022 0x12
-
-+#define CCSR_BRR_OFFSET 0xe4
-+#define CCSR_SCRATCHRW1_OFFSET 0x200
-+
- #define RCWSR0_SYS_PLL_RAT_SHIFT 25
- #define RCWSR0_SYS_PLL_RAT_MASK 0x1f
- #define RCWSR0_MEM_PLL_RAT_SHIFT 16
-@@ -29,6 +32,11 @@
- #define ARCH_TIMER_CTRL_ENABLE (1 << 0)
- #define SYS_COUNTER_CTRL_ENABLE (1 << 24)
-
-+#define DCFG_CCSR_PORSR1_RCW_MASK 0xff800000
-+#define DCFG_CCSR_PORSR1_RCW_SRC_I2C 0x24800000
-+
-+#define DCFG_DCSR_PORCR1 0
-+
- struct sys_info {
- unsigned long freq_processor[CONFIG_MAX_CPUS];
- unsigned long freq_systembus;
-@@ -98,6 +106,7 @@
- #define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f
- #define SCFG_ETSECCMCR_GE2_CLK125 0x04000000
- #define SCFG_PIXCLKCR_PXCKEN 0x80000000
-+#define SCFG_QSPI_CLKSEL 0xc0100000
-
- /* Supplemental Configuration Unit */
- struct ccsr_scfg {
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h 2015-01-01 17:34:32.065506333 +0100
-@@ -0,0 +1,17 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __FSL_LS102XA_STREAM_ID_H_
-+#define __FSL_LS102XA_STREAM_ID_H_
-+
-+struct smmu_stream_id {
-+ uint16_t offset;
-+ uint16_t stream_id;
-+ char dev_name[32];
-+};
-+
-+void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num);
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ns_access.h u-boot/arch/arm/include/asm/arch-ls102xa/ns_access.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ns_access.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-ls102xa/ns_access.h 2015-01-01 17:34:32.065506333 +0100
-@@ -0,0 +1,118 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __FSL_NS_ACCESS_H_
-+#define __FSL_NS_ACCESS_H_
-+
-+enum csu_cslx_access {
-+ CSU_NS_SUP_R = 0x08,
-+ CSU_NS_SUP_W = 0x80,
-+ CSU_NS_SUP_RW = 0x88,
-+ CSU_NS_USER_R = 0x04,
-+ CSU_NS_USER_W = 0x40,
-+ CSU_NS_USER_RW = 0x44,
-+ CSU_S_SUP_R = 0x02,
-+ CSU_S_SUP_W = 0x20,
-+ CSU_S_SUP_RW = 0x22,
-+ CSU_S_USER_R = 0x01,
-+ CSU_S_USER_W = 0x10,
-+ CSU_S_USER_RW = 0x11,
-+ CSU_ALL_RW = 0xff,
-+};
-+
-+enum csu_cslx_ind {
-+ CSU_CSLX_PCIE2_IO = 0,
-+ CSU_CSLX_PCIE1_IO,
-+ CSU_CSLX_MG2TPR_IP,
-+ CSU_CSLX_IFC_MEM,
-+ CSU_CSLX_OCRAM,
-+ CSU_CSLX_GIC,
-+ CSU_CSLX_PCIE1,
-+ CSU_CSLX_OCRAM2,
-+ CSU_CSLX_QSPI_MEM,
-+ CSU_CSLX_PCIE2,
-+ CSU_CSLX_SATA,
-+ CSU_CSLX_USB3,
-+ CSU_CSLX_SERDES = 32,
-+ CSU_CSLX_QDMA,
-+ CSU_CSLX_LPUART2,
-+ CSU_CSLX_LPUART1,
-+ CSU_CSLX_LPUART4,
-+ CSU_CSLX_LPUART3,
-+ CSU_CSLX_LPUART6,
-+ CSU_CSLX_LPUART5,
-+ CSU_CSLX_DSPI2 = 40,
-+ CSU_CSLX_DSPI1,
-+ CSU_CSLX_QSPI,
-+ CSU_CSLX_ESDHC,
-+ CSU_CSLX_2D_ACE,
-+ CSU_CSLX_IFC,
-+ CSU_CSLX_I2C1,
-+ CSU_CSLX_USB2,
-+ CSU_CSLX_I2C3,
-+ CSU_CSLX_I2C2,
-+ CSU_CSLX_DUART2 = 50,
-+ CSU_CSLX_DUART1,
-+ CSU_CSLX_WDT2,
-+ CSU_CSLX_WDT1,
-+ CSU_CSLX_EDMA,
-+ CSU_CSLX_SYS_CNT,
-+ CSU_CSLX_DMA_MUX2,
-+ CSU_CSLX_DMA_MUX1,
-+ CSU_CSLX_DDR,
-+ CSU_CSLX_QUICC,
-+ CSU_CSLX_DCFG_CCU_RCPM = 60,
-+ CSU_CSLX_SECURE_BOOTROM,
-+ CSU_CSLX_SFP,
-+ CSU_CSLX_TMU,
-+ CSU_CSLX_SECURE_MONITOR,
-+ CSU_CSLX_RESERVED0,
-+ CSU_CSLX_ETSEC1,
-+ CSU_CSLX_SEC5_5,
-+ CSU_CSLX_ETSEC3,
-+ CSU_CSLX_ETSEC2,
-+ CSU_CSLX_GPIO2 = 70,
-+ CSU_CSLX_GPIO1,
-+ CSU_CSLX_GPIO4,
-+ CSU_CSLX_GPIO3,
-+ CSU_CSLX_PLATFORM_CONT,
-+ CSU_CSLX_CSU,
-+ CSU_CSLX_ASRC,
-+ CSU_CSLX_SPDIF,
-+ CSU_CSLX_FLEXCAN2,
-+ CSU_CSLX_FLEXCAN1,
-+ CSU_CSLX_FLEXCAN4 = 80,
-+ CSU_CSLX_FLEXCAN3,
-+ CSU_CSLX_SAI2,
-+ CSU_CSLX_SAI1,
-+ CSU_CSLX_SAI4,
-+ CSU_CSLX_SAI3,
-+ CSU_CSLX_FTM2,
-+ CSU_CSLX_FTM1,
-+ CSU_CSLX_FTM4,
-+ CSU_CSLX_FTM3,
-+ CSU_CSLX_FTM6 = 90,
-+ CSU_CSLX_FTM5,
-+ CSU_CSLX_FTM8,
-+ CSU_CSLX_FTM7,
-+ CSU_CSLX_COP_DCSR,
-+ CSU_CSLX_EPU,
-+ CSU_CSLX_GDI,
-+ CSU_CSLX_DDI,
-+ CSU_CSLX_RESERVED1,
-+ CSU_CSLX_USB3_PHY = 117,
-+ CSU_CSLX_RESERVED2,
-+ CSU_CSLX_MAX,
-+};
-+
-+struct csu_ns_dev {
-+ unsigned long ind;
-+ uint32_t val;
-+};
-+
-+void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num);
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/spl.h u-boot/arch/arm/include/asm/arch-ls102xa/spl.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/spl.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-ls102xa/spl.h 2015-01-01 17:34:32.065506333 +0100
-@@ -0,0 +1,20 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __ASM_ARCH_SPL_H__
-+#define __ASM_ARCH_SPL_H__
-+
-+#define BOOT_DEVICE_NONE 0
-+#define BOOT_DEVICE_XIP 1
-+#define BOOT_DEVICE_XIPWAIT 2
-+#define BOOT_DEVICE_NAND 3
-+#define BOOT_DEVICE_ONENAND 4
-+#define BOOT_DEVICE_MMC1 5
-+#define BOOT_DEVICE_MMC2 6
-+#define BOOT_DEVICE_MMC2_2 7
-+#define BOOT_DEVICE_SPI 10
-+
-+#endif /* __ASM_ARCH_SPL_H__ */
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/clock.h u-boot/arch/arm/include/asm/arch-mx6/clock.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/clock.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-mx6/clock.h 2015-01-01 17:34:32.073506203 +0100
-@@ -43,10 +43,10 @@
- };
-
- enum enet_freq {
-- ENET_25MHz,
-- ENET_50MHz,
-- ENET_100MHz,
-- ENET_125MHz,
-+ ENET_25MHZ,
-+ ENET_50MHZ,
-+ ENET_100MHZ,
-+ ENET_125MHZ,
- };
-
- u32 imx_get_uartclk(void);
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/mx6sl_pins.h u-boot/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/mx6sl_pins.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-mx6/mx6sl_pins.h 2015-01-01 17:34:32.073506203 +0100
-@@ -53,5 +53,10 @@
- MX6_PAD_FEC_REF_CLK__FEC_REF_OUT = IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0),
- MX6_PAD_FEC_RX_ER__GPIO_4_19 = IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0),
- MX6_PAD_FEC_TX_CLK__GPIO_4_21 = IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0),
-+
-+ MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID = IOMUX_PAD(0x03D0, 0x00E0, 4, 0x05DC, 0, 0),
-+
-+ MX6_PAD_KEY_COL4__USB_USBOTG1_PWR = IOMUX_PAD(0x0484, 0x017C, 6, 0x0000, 0, 0),
-+ MX6_PAD_KEY_COL5__USB_USBOTG2_PWR = IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0),
- };
- #endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/mmc.h u-boot/arch/arm/include/asm/arch-rmobile/mmc.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/mmc.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-rmobile/mmc.h 2015-01-01 17:34:32.085506005 +0100
-@@ -0,0 +1,14 @@
-+/*
-+ * Renesas SuperH MMCIF driver.
-+ *
-+ * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-+ * Copyright (C) 2014 Renesas Electronics Corporation
-+ *
-+ * SPDX-License-Identifier: GPL-2.0
-+ */
-+#ifndef _RMOBILE_MMC_H_
-+#define _RMOBILE_MMC_H_
-+
-+int mmcif_mmc_init(void);
-+
-+#endif /* _RMOBILE_MMC_H_ */
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7790.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7790.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7790.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7790.h 2015-01-01 17:34:32.085506005 +0100
-@@ -15,6 +15,19 @@
- #define CONFIG_SYS_I2C_SH_BASE2 0xE6520000
- #define CONFIG_SYS_I2C_SH_BASE3 0xE60B0000
-
-+/* Module stop control/status register bits */
-+#define MSTP0_BITS 0x00640801
-+#define MSTP1_BITS 0xDB6E9BDF
-+#define MSTP2_BITS 0x300DA1FC
-+#define MSTP3_BITS 0xF08CF831
-+#define MSTP4_BITS 0x80000184
-+#define MSTP5_BITS 0x44C00046
-+#define MSTP7_BITS 0x07F30718
-+#define MSTP8_BITS 0x01F0FF84
-+#define MSTP9_BITS 0xF5979FCF
-+#define MSTP10_BITS 0xFFFEFFE0
-+#define MSTP11_BITS 0x00000000
-+
- #define R8A7790_CUT_ES2X 2
- #define IS_R8A7790_ES2() \
- (rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X)
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7791.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7791.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7791.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7791.h 2015-01-01 17:34:32.089505941 +0100
-@@ -51,6 +51,19 @@
- #define DBSC3_1_QOS_W15_BASE 0xE67A2F00
- #define DBSC3_1_DBADJ2 0xE67A00C8
-
-+/* Module stop control/status register bits */
-+#define MSTP0_BITS 0x00640801
-+#define MSTP1_BITS 0x9B6C9B5A
-+#define MSTP2_BITS 0x100D21FC
-+#define MSTP3_BITS 0xF08CD810
-+#define MSTP4_BITS 0x800001C4
-+#define MSTP5_BITS 0x44C00046
-+#define MSTP7_BITS 0x05BFE618
-+#define MSTP8_BITS 0x40C0FE85
-+#define MSTP9_BITS 0xFF979FFF
-+#define MSTP10_BITS 0xFFFEFFE0
-+#define MSTP11_BITS 0x000001C0
-+
- #define R8A7791_CUT_ES2X 2
- #define IS_R8A7791_ES2() \
- (rmobile_get_cpu_rev_integer() == R8A7791_CUT_ES2X)
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7793.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7793.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7793.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7793.h 2015-01-01 17:34:32.089505941 +0100
-@@ -56,6 +56,20 @@
- /*
- * R8A7793 I/O Product Information
- */
-+
-+/* Module stop control/status register bits */
-+#define MSTP0_BITS 0x00640801
-+#define MSTP1_BITS 0x9B6C9B5A
-+#define MSTP2_BITS 0x100D21FC
-+#define MSTP3_BITS 0xF08CD810
-+#define MSTP4_BITS 0x800001C4
-+#define MSTP5_BITS 0x44C00046
-+#define MSTP7_BITS 0x05BFE618
-+#define MSTP8_BITS 0x40C0FE85
-+#define MSTP9_BITS 0xFF979FFF
-+#define MSTP10_BITS 0xFFFEFFE0
-+#define MSTP11_BITS 0x000001C0
-+
- #define R8A7793_CUT_ES2X 2
- #define IS_R8A7793_ES2() \
- (rmobile_get_cpu_rev_integer() == R8A7793_CUT_ES2X)
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7794.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7794.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7794.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7794.h 2015-01-01 17:34:32.089505941 +0100
-@@ -14,4 +14,17 @@
- /* SH-I2C */
- #define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
-
-+/* Module stop control/status register bits */
-+#define MSTP0_BITS 0x00440801
-+#define MSTP1_BITS 0x936899DA
-+#define MSTP2_BITS 0x100D21FC
-+#define MSTP3_BITS 0xE084D810
-+#define MSTP4_BITS 0x800001C4
-+#define MSTP5_BITS 0x40C00044
-+#define MSTP7_BITS 0x013FE618
-+#define MSTP8_BITS 0x40803C05
-+#define MSTP9_BITS 0xFB879FEE
-+#define MSTP10_BITS 0xFFFEFFE0
-+#define MSTP11_BITS 0x000001C0
-+
- #endif /* __ASM_ARCH_R8A7794_H */
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-base.h u-boot/arch/arm/include/asm/arch-rmobile/rcar-base.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-base.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-rmobile/rcar-base.h 2015-01-01 17:34:32.089505941 +0100
-@@ -29,6 +29,45 @@
- #define SCIF4_BASE 0xE6EE0000
- #define SCIF5_BASE 0xE6EE8000
-
-+/* Module stop status register */
-+#define MSTPSR0 0xE6150030
-+#define MSTPSR1 0xE6150038
-+#define MSTPSR2 0xE6150040
-+#define MSTPSR3 0xE6150048
-+#define MSTPSR4 0xE615004C
-+#define MSTPSR5 0xE615003C
-+#define MSTPSR7 0xE61501C4
-+#define MSTPSR8 0xE61509A0
-+#define MSTPSR9 0xE61509A4
-+#define MSTPSR10 0xE61509A8
-+#define MSTPSR11 0xE61509AC
-+
-+/* Realtime module stop control register */
-+#define RMSTPCR0 0xE6150110
-+#define RMSTPCR1 0xE6150114
-+#define RMSTPCR2 0xE6150118
-+#define RMSTPCR3 0xE615011C
-+#define RMSTPCR4 0xE6150120
-+#define RMSTPCR5 0xE6150124
-+#define RMSTPCR7 0xE615012C
-+#define RMSTPCR8 0xE6150980
-+#define RMSTPCR9 0xE6150984
-+#define RMSTPCR10 0xE6150988
-+#define RMSTPCR11 0xE615098C
-+
-+/* System module stop control register */
-+#define SMSTPCR0 0xE6150130
-+#define SMSTPCR1 0xE6150134
-+#define SMSTPCR2 0xE6150138
-+#define SMSTPCR3 0xE615013C
-+#define SMSTPCR4 0xE6150140
-+#define SMSTPCR5 0xE6150144
-+#define SMSTPCR7 0xE615014C
-+#define SMSTPCR8 0xE6150990
-+#define SMSTPCR9 0xE6150994
-+#define SMSTPCR10 0xE6150998
-+#define SMSTPCR11 0xE615099C
-+
- /*
- * SH-I2C
- * Ch2 and ch3 are different address. These are defined
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-mstp.h u-boot/arch/arm/include/asm/arch-rmobile/rcar-mstp.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-mstp.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-rmobile/rcar-mstp.h 2015-01-01 17:34:32.089505941 +0100
-@@ -0,0 +1,109 @@
-+/*
-+ * arch/arm/include/asm/arch-rmobile/rcar-mstp.h
-+ *
-+ * Copyright (C) 2013, 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-+ * Copyright (C) 2013, 2014 Renesas Electronics Corporation
-+ *
-+ * SPDX-License-Identifier: GPL-2.0
-+ */
-+
-+#ifndef __ASM_ARCH_RCAR_MSTP_H
-+#define __ASM_ARCH_RCAR_MSTP_H
-+
-+#define mstp_setbits(type, addr, saddr, set) \
-+ out_##type((saddr), in_##type(addr) | (set))
-+#define mstp_clrbits(type, addr, saddr, clear) \
-+ out_##type((saddr), in_##type(addr) & ~(clear))
-+#define mstp_setclrbits(type, addr, set, clear) \
-+ out_##type((addr), (in_##type(addr) | (set)) & ~(clear))
-+#define mstp_setbits_le32(addr, saddr, set) \
-+ mstp_setbits(le32, addr, saddr, set)
-+#define mstp_clrbits_le32(addr, saddr, clear) \
-+ mstp_clrbits(le32, addr, saddr, clear)
-+#define mstp_setclrbits_le32(addr, set, clear) \
-+ mstp_setclrbits(le32, addr, set, clear)
-+
-+#ifndef CONFIG_SMSTP0_ENA
-+#define CONFIG_SMSTP0_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP1_ENA
-+#define CONFIG_SMSTP1_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP2_ENA
-+#define CONFIG_SMSTP2_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP3_ENA
-+#define CONFIG_SMSTP3_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP4_ENA
-+#define CONFIG_SMSTP4_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP5_ENA
-+#define CONFIG_SMSTP5_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP6_ENA
-+#define CONFIG_SMSTP6_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP7_ENA
-+#define CONFIG_SMSTP7_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP8_ENA
-+#define CONFIG_SMSTP8_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP9_ENA
-+#define CONFIG_SMSTP9_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP10_ENA
-+#define CONFIG_SMSTP10_ENA 0x00
-+#endif
-+#ifndef CONFIG_SMSTP11_ENA
-+#define CONFIG_SMSTP11_ENA 0x00
-+#endif
-+
-+#ifndef CONFIG_RMSTP0_ENA
-+#define CONFIG_RMSTP0_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP1_ENA
-+#define CONFIG_RMSTP1_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP2_ENA
-+#define CONFIG_RMSTP2_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP3_ENA
-+#define CONFIG_RMSTP3_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP4_ENA
-+#define CONFIG_RMSTP4_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP5_ENA
-+#define CONFIG_RMSTP5_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP6_ENA
-+#define CONFIG_RMSTP6_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP7_ENA
-+#define CONFIG_RMSTP7_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP8_ENA
-+#define CONFIG_RMSTP8_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP9_ENA
-+#define CONFIG_RMSTP9_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP10_ENA
-+#define CONFIG_RMSTP10_ENA 0x00
-+#endif
-+#ifndef CONFIG_RMSTP11_ENA
-+#define CONFIG_RMSTP11_ENA 0x00
-+#endif
-+
-+struct mstp_ctl {
-+ u32 s_addr;
-+ u32 s_dis;
-+ u32 s_ena;
-+ u32 r_addr;
-+ u32 r_dis;
-+ u32 r_ena;
-+};
-+
-+#endif /* __ASM_ARCH_RCAR_MSTP_H */
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/clock_manager.h u-boot/arch/arm/include/asm/arch-socfpga/clock_manager.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/clock_manager.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-socfpga/clock_manager.h 2015-01-01 17:34:32.089505941 +0100
-@@ -14,6 +14,7 @@
- unsigned int cm_get_l4_sp_clk_hz(void);
- unsigned int cm_get_mmc_controller_clk_hz(void);
- unsigned int cm_get_qspi_controller_clk_hz(void);
-+unsigned int cm_get_spi_controller_clk_hz(void);
- #endif
-
- typedef struct {
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/freeze_controller.h u-boot/arch/arm/include/asm/arch-socfpga/freeze_controller.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/freeze_controller.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-socfpga/freeze_controller.h 2015-01-01 17:34:32.089505941 +0100
-@@ -42,7 +42,6 @@
- #define SYSMGR_FRZCTRL_HWCTRL_VIO1REQ_MASK 0x00000001
- #define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_FROZEN 0x2
- #define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_THAWED 0x1
--#define SYSMGR_FRZCTRL_VIOCTRL_SHIFT 0x2
-
- void sys_mgr_frzctrl_freeze_req(void);
- void sys_mgr_frzctrl_thaw_req(void);
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/scan_manager.h u-boot/arch/arm/include/asm/arch-socfpga/scan_manager.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/scan_manager.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-socfpga/scan_manager.h 2015-01-01 17:34:32.089505941 +0100
-@@ -13,6 +13,7 @@
- u32 padding[2];
- u32 fifo_single_byte;
- u32 fifo_double_byte;
-+ u32 fifo_triple_byte;
- u32 fifo_quad_byte;
- };
-
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/gpio.h u-boot/arch/arm/include/asm/arch-stv0991/gpio.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/gpio.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-stv0991/gpio.h 2015-01-01 17:34:32.093505875 +0100
-@@ -0,0 +1,22 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __ASM_ARCH_STV0991_GPIO_H
-+#define __ASM_ARCH_STV0991_GPIO_H
-+
-+enum gpio_direction {
-+ GPIO_DIRECTION_IN,
-+ GPIO_DIRECTION_OUT,
-+};
-+
-+struct gpio_regs {
-+ u32 data; /* offset 0x0 */
-+ u32 reserved[0xff]; /* 0x4--0x3fc */
-+ u32 dir; /* offset 0x400 */
-+};
-+
-+#endif /* __ASM_ARCH_STV0991_GPIO_H */
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/hardware.h u-boot/arch/arm/include/asm/arch-stv0991/hardware.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/hardware.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-stv0991/hardware.h 2015-01-01 17:34:32.093505875 +0100
-@@ -0,0 +1,73 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _ASM_ARCH_HARDWARE_H
-+#define _ASM_ARCH_HARDWARE_H
-+
-+/* STV0991 */
-+#define SRAM0_BASE_ADDR 0x00000000UL
-+#define SRAM1_BASE_ADDR 0x00068000UL
-+#define SRAM2_BASE_ADDR 0x000D0000UL
-+#define SRAM3_BASE_ADDR 0x00138000UL
-+#define CFS_SRAM0_BASE_ADDR 0x00198000UL
-+#define CFS_SRAM1_BASE_ADDR 0x001B8000UL
-+#define FAST_SRAM_BASE_ADDR 0x001D8000UL
-+#define FLASH_BASE_ADDR 0x40000000UL
-+#define PL310_BASE_ADDR 0x70000000UL
-+#define HSAXIM_BASE_ADDR 0x70100000UL
-+#define IMGSS_BASE_ADDR 0x70200000UL
-+#define ADC_BASE_ADDR 0x80000000UL
-+#define GPIOA_BASE_ADDR 0x80001000UL
-+#define GPIOB_BASE_ADDR 0x80002000UL
-+#define GPIOC_BASE_ADDR 0x80003000UL
-+#define HDM_BASE_ADDR 0x80004000UL
-+#define THSENS_BASE_ADDR 0x80200000UL
-+#define GPTIMER2_BASE_ADDR 0x80201000UL
-+#define GPTIMER1_BASE_ADDR 0x80202000UL
-+#define QSPI_BASE_ADDR 0x80203000UL
-+#define CGU_BASE_ADDR 0x80204000UL
-+#define CREG_BASE_ADDR 0x80205000UL
-+#define PEC_BASE_ADDR 0x80206000UL
-+#define WDRU_BASE_ADDR 0x80207000UL
-+#define BSEC_BASE_ADDR 0x80208000UL
-+#define DAP_ROM_BASE_ADDR 0x80210000UL
-+#define SOC_CTI_BASE_ADDR 0x80211000UL
-+#define TPIU_BASE_ADDR 0x80212000UL
-+#define TMC_ETF_BASE_ADDR 0x80213000UL
-+#define R4_ETM_BASE_ADDR 0x80214000UL
-+#define R4_CTI_BASE_ADDR 0x80215000UL
-+#define R4_DBG_BASE_ADDR 0x80216000UL
-+#define GMAC_BASE_ADDR 0x80300000UL
-+#define RNSS_BASE_ADDR 0x80302000UL
-+#define CRYP_BASE_ADDR 0x80303000UL
-+#define HASH_BASE_ADDR 0x80304000UL
-+#define GPDMA_BASE_ADDR 0x80305000UL
-+#define ISA_BASE_ADDR 0x8032A000UL
-+#define HCI_BASE_ADDR 0x80400000UL
-+#define I2C1_BASE_ADDR 0x80401000UL
-+#define I2C2_BASE_ADDR 0x80402000UL
-+#define SAI_BASE_ADDR 0x80403000UL
-+#define USI_BASE_ADDR 0x80404000UL
-+#define SPI1_BASE_ADDR 0x80405000UL
-+#define UART_BASE_ADDR 0x80406000UL
-+#define SPI2_BASE_ADDR 0x80500000UL
-+#define CAN_BASE_ADDR 0x80501000UL
-+#define USART1_BASE_ADDR 0x80502000UL
-+#define USART2_BASE_ADDR 0x80503000UL
-+#define USART3_BASE_ADDR 0x80504000UL
-+#define USART4_BASE_ADDR 0x80505000UL
-+#define USART5_BASE_ADDR 0x80506000UL
-+#define USART6_BASE_ADDR 0x80507000UL
-+#define SDI2_BASE_ADDR 0x80600000UL
-+#define SDI1_BASE_ADDR 0x80601000UL
-+#define VICA_BASE_ADDR 0x81000000UL
-+#define VICB_BASE_ADDR 0x81001000UL
-+#define STM_CHANNELS_BASE_ADDR 0x81100000UL
-+#define STM_BASE_ADDR 0x81110000UL
-+#define SROM_BASE_ADDR 0xFFFF0000UL
-+
-+#endif /* _ASM_ARCH_HARDWARE_H */
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h 2015-01-01 17:34:32.093505875 +0100
-@@ -0,0 +1,116 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _STV0991_CGU_H
-+#define _STV0991_CGU_H
-+
-+struct stv0991_cgu_regs {
-+ u32 cpu_freq; /* offset 0x0 */
-+ u32 icn2_freq; /* offset 0x4 */
-+ u32 dma_freq; /* offset 0x8 */
-+ u32 isp_freq; /* offset 0xc */
-+ u32 h264_freq; /* offset 0x10 */
-+ u32 osif_freq; /* offset 0x14 */
-+ u32 ren_freq; /* offset 0x18 */
-+ u32 tim_freq; /* offset 0x1c */
-+ u32 sai_freq; /* offset 0x20 */
-+ u32 eth_freq; /* offset 0x24 */
-+ u32 i2c_freq; /* offset 0x28 */
-+ u32 spi_freq; /* offset 0x2c */
-+ u32 uart_freq; /* offset 0x30 */
-+ u32 qspi_freq; /* offset 0x34 */
-+ u32 sdio_freq; /* offset 0x38 */
-+ u32 usi_freq; /* offset 0x3c */
-+ u32 can_line_freq; /* offset 0x40 */
-+ u32 debug_freq; /* offset 0x44 */
-+ u32 trace_freq; /* offset 0x48 */
-+ u32 stm_freq; /* offset 0x4c */
-+ u32 eth_ctrl; /* offset 0x50 */
-+ u32 reserved[3]; /* offset 0x54 */
-+ u32 osc_ctrl; /* offset 0x60 */
-+ u32 pll1_ctrl; /* offset 0x64 */
-+ u32 pll1_freq; /* offset 0x68 */
-+ u32 pll1_fract; /* offset 0x6c */
-+ u32 pll1_spread; /* offset 0x70 */
-+ u32 pll1_status; /* offset 0x74 */
-+ u32 pll2_ctrl; /* offset 0x78 */
-+ u32 pll2_freq; /* offset 0x7c */
-+ u32 pll2_fract; /* offset 0x80 */
-+ u32 pll2_spread; /* offset 0x84 */
-+ u32 pll2_status; /* offset 0x88 */
-+ u32 cgu_enable_1; /* offset 0x8c */
-+ u32 cgu_enable_2; /* offset 0x90 */
-+ u32 cgu_isp_pulse; /* offset 0x94 */
-+ u32 cgu_h264_pulse; /* offset 0x98 */
-+ u32 cgu_osif_pulse; /* offset 0x9c */
-+ u32 cgu_ren_pulse; /* offset 0xa0 */
-+
-+};
-+
-+/* CGU Timer */
-+#define CLK_TMR_OSC 0
-+#define CLK_TMR_MCLK 1
-+#define CLK_TMR_PLL1 2
-+#define CLK_TMR_PLL2 3
-+#define MDIV_SHIFT_TMR 3
-+#define DIV_SHIFT_TMR 6
-+
-+#define TIMER1_CLK_CFG (0 << DIV_SHIFT_TMR \
-+ | 0 << MDIV_SHIFT_TMR | CLK_TMR_MCLK)
-+
-+/* Clock Enable/Disable */
-+
-+#define TIMER1_CLK_EN (1 << 15)
-+
-+/* CGU Uart config */
-+#define CLK_UART_MCLK 0
-+#define CLK_UART_PLL1 1
-+#define CLK_UART_PLL2 2
-+
-+#define MDIV_SHIFT_UART 3
-+#define DIV_SHIFT_UART 6
-+
-+#define UART_CLK_CFG (4 << DIV_SHIFT_UART \
-+ | 1 << MDIV_SHIFT_UART | CLK_UART_MCLK)
-+
-+/* CGU Ethernet clock config */
-+#define CLK_ETH_MCLK 0
-+#define CLK_ETH_PLL1 1
-+#define CLK_ETH_PLL2 2
-+
-+#define MDIV_SHIFT_ETH 3
-+#define DIV_SHIFT_ETH 6
-+#define DIV_ETH_125 9
-+#define DIV_ETH_50 12
-+#define DIV_ETH_P2P 15
-+
-+#define ETH_CLK_CFG (4 << DIV_ETH_P2P | 4 << DIV_ETH_50 \
-+ | 1 << DIV_ETH_125 \
-+ | 0 << DIV_SHIFT_ETH \
-+ | 3 << MDIV_SHIFT_ETH | CLK_ETH_PLL1)
-+ /* CGU Ethernet control */
-+
-+#define ETH_CLK_TX_EXT_PHY 0
-+#define ETH_CLK_TX_125M 1
-+#define ETH_CLK_TX_25M 2
-+#define ETH_CLK_TX_2M5 3
-+#define ETH_CLK_TX_DIS 7
-+
-+#define ETH_CLK_RX_EXT_PHY 0
-+#define ETH_CLK_RX_25M 1
-+#define ETH_CLK_RX_2M5 2
-+#define ETH_CLK_RX_DIS 3
-+#define RX_CLK_SHIFT 3
-+#define ETH_CLK_MASK ~(0x1F)
-+
-+#define ETH_PHY_MODE_GMII 0
-+#define ETH_PHY_MODE_RMII 1
-+#define ETH_PHY_CLK_DIS 1
-+
-+#define ETH_CLK_CTRL (ETH_CLK_RX_EXT_PHY << RX_CLK_SHIFT \
-+ | ETH_CLK_TX_EXT_PHY)
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_creg.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_creg.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_creg.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_creg.h 2015-01-01 17:34:32.093505875 +0100
-@@ -0,0 +1,95 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _STV0991_CREG_H
-+#define _STV0991_CREG_H
-+
-+struct stv0991_creg {
-+ u32 version; /* offset 0x0 */
-+ u32 hdpctl; /* offset 0x4 */
-+ u32 hdpval; /* offset 0x8 */
-+ u32 hdpgposet; /* offset 0xc */
-+ u32 hdpgpoclr; /* offset 0x10 */
-+ u32 hdpgpoval; /* offset 0x14 */
-+ u32 stm_mux; /* offset 0x18 */
-+ u32 sysctrl_1; /* offset 0x1c */
-+ u32 sysctrl_2; /* offset 0x20 */
-+ u32 sysctrl_3; /* offset 0x24 */
-+ u32 sysctrl_4; /* offset 0x28 */
-+ u32 reserved_1[0x35]; /* offset 0x2C-0xFC */
-+ u32 mux1; /* offset 0x100 */
-+ u32 mux2; /* offset 0x104 */
-+ u32 mux3; /* offset 0x108 */
-+ u32 mux4; /* offset 0x10c */
-+ u32 mux5; /* offset 0x110 */
-+ u32 mux6; /* offset 0x114 */
-+ u32 mux7; /* offset 0x118 */
-+ u32 mux8; /* offset 0x11c */
-+ u32 mux9; /* offset 0x120 */
-+ u32 mux10; /* offset 0x124 */
-+ u32 mux11; /* offset 0x128 */
-+ u32 mux12; /* offset 0x12c */
-+ u32 mux13; /* offset 0x130 */
-+ u32 reserved_2[0x33]; /* offset 0x134-0x1FC */
-+ u32 cfg_pad1; /* offset 0x200 */
-+ u32 cfg_pad2; /* offset 0x204 */
-+ u32 cfg_pad3; /* offset 0x208 */
-+ u32 cfg_pad4; /* offset 0x20c */
-+ u32 cfg_pad5; /* offset 0x210 */
-+ u32 cfg_pad6; /* offset 0x214 */
-+ u32 cfg_pad7; /* offset 0x218 */
-+ u32 reserved_3[0x39]; /* offset 0x21C-0x2FC */
-+ u32 vdd_pad1; /* offset 0x300 */
-+ u32 vdd_pad2; /* offset 0x304 */
-+ u32 reserved_4[0x3e]; /* offset 0x308-0x3FC */
-+ u32 vdd_comp1; /* offset 0x400 */
-+};
-+
-+/* CREG MUX 12 register */
-+#define GPIOC_30_MUX_SHIFT 24
-+#define GPIOC_30_MUX_MASK ~(1 << GPIOC_30_MUX_SHIFT)
-+#define CFG_GPIOC_30_UART_TX (1 << GPIOC_30_MUX_SHIFT)
-+
-+#define GPIOC_31_MUX_SHIFT 28
-+#define GPIOC_31_MUX_MASK ~(1 << GPIOC_31_MUX_SHIFT)
-+#define CFG_GPIOC_31_UART_RX (1 << GPIOC_31_MUX_SHIFT)
-+
-+/* CREG MUX 7 register */
-+#define GPIOB_16_MUX_SHIFT 0
-+#define GPIOB_16_MUX_MASK ~(1 << GPIOB_16_MUX_SHIFT)
-+#define CFG_GPIOB_16_UART_TX (1 << GPIOB_16_MUX_SHIFT)
-+
-+#define GPIOB_17_MUX_SHIFT 4
-+#define GPIOB_17_MUX_MASK ~(1 << GPIOB_17_MUX_SHIFT)
-+#define CFG_GPIOB_17_UART_RX (1 << GPIOB_17_MUX_SHIFT)
-+
-+/* CREG CFG_PAD6 register */
-+
-+#define GPIOC_31_MODE_SHIFT 30
-+#define GPIOC_31_MODE_MASK ~(1 << GPIOC_31_MODE_SHIFT)
-+#define CFG_GPIOC_31_MODE_OD (0 << GPIOC_31_MODE_SHIFT)
-+#define CFG_GPIOC_31_MODE_PP (1 << GPIOC_31_MODE_SHIFT)
-+
-+#define GPIOC_30_MODE_SHIFT 28
-+#define GPIOC_30_MODE_MASK ~(1 << GPIOC_30_MODE_SHIFT)
-+#define CFG_GPIOC_30_MODE_LOW (0 << GPIOC_30_MODE_SHIFT)
-+#define CFG_GPIOC_30_MODE_HIGH (1 << GPIOC_30_MODE_SHIFT)
-+
-+/* CREG Ethernet pad config */
-+
-+#define VDD_ETH_PS_1V8 0
-+#define VDD_ETH_PS_2V5 2
-+#define VDD_ETH_PS_3V3 3
-+#define VDD_ETH_PS_MASK 0x3
-+
-+#define VDD_ETH_PS_SHIFT 12
-+#define ETH_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_PS_SHIFT)
-+
-+#define VDD_ETH_M_PS_SHIFT 28
-+#define ETH_M_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_M_PS_SHIFT)
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_defs.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_defs.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_defs.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_defs.h 2015-01-01 17:34:32.093505875 +0100
-@@ -0,0 +1,16 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __STV0991_DEFS_H__
-+#define __STV0991_DEFS_H__
-+#include <asm/arch/stv0991_periph.h>
-+
-+extern int stv0991_pinmux_config(enum periph_id);
-+extern int clock_setup(enum periph_clock);
-+
-+#endif
-+
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h 2015-01-01 17:34:32.093505875 +0100
-@@ -0,0 +1,43 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _STV0991_GPT_H
-+#define _STV0991_GPT_H
-+
-+#include <asm/arch-stv0991/hardware.h>
-+
-+struct gpt_regs {
-+ u32 cr1;
-+ u32 cr2;
-+ u32 reserved_1;
-+ u32 dier; /* dma_int_en */
-+ u32 sr; /* status reg */
-+ u32 egr; /* event gen */
-+ u32 reserved_2[3]; /* offset 0x18--0x20*/
-+ u32 cnt;
-+ u32 psc;
-+ u32 arr;
-+};
-+
-+struct gpt_regs *const gpt1_regs_ptr =
-+ (struct gpt_regs *) GPTIMER1_BASE_ADDR;
-+
-+/* Timer control1 register */
-+#define GPT_CR1_CEN 0x0001
-+#define GPT_MODE_AUTO_RELOAD (1 << 7)
-+
-+/* Timer prescalar reg */
-+#define GPT_PRESCALER_128 0x128
-+
-+/* Auto reload register for free running config */
-+#define GPT_FREE_RUNNING 0xFFFF
-+
-+/* Timer, HZ specific defines */
-+#define CONFIG_STV0991_HZ 1000
-+#define CONFIG_STV0991_HZ_CLOCK (27*1000*1000)/GPT_PRESCALER_128
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_periph.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_periph.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_periph.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_periph.h 2015-01-01 17:34:32.093505875 +0100
-@@ -0,0 +1,44 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __ASM_ARM_ARCH_PERIPH_H
-+#define __ASM_ARM_ARCH_PERIPH_H
-+
-+/*
-+ * Peripherals required for pinmux configuration. List will
-+ * grow with support for more devices getting added.
-+ * Numbering based on interrupt table.
-+ *
-+ */
-+enum periph_id {
-+ UART_GPIOC_30_31 = 0,
-+ UART_GPIOB_16_17,
-+ ETH_GPIOB_10_31_C_0_4,
-+ PERIPH_ID_I2C0,
-+ PERIPH_ID_I2C1,
-+ PERIPH_ID_I2C2,
-+ PERIPH_ID_I2C3,
-+ PERIPH_ID_I2C4,
-+ PERIPH_ID_I2C5,
-+ PERIPH_ID_I2C6,
-+ PERIPH_ID_I2C7,
-+ PERIPH_ID_SPI0,
-+ PERIPH_ID_SPI1,
-+ PERIPH_ID_SPI2,
-+ PERIPH_ID_SDMMC0,
-+ PERIPH_ID_SDMMC1,
-+ PERIPH_ID_SDMMC2,
-+ PERIPH_ID_SDMMC3,
-+ PERIPH_ID_I2S1,
-+};
-+
-+enum periph_clock {
-+ UART_CLOCK_CFG = 0,
-+ ETH_CLOCK_CFG,
-+};
-+
-+#endif /* __ASM_ARM_ARCH_PERIPH_H */
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h 2015-01-01 17:34:32.093505875 +0100
-@@ -0,0 +1,28 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _STV0991_WD_RST_H
-+#define _STV0991_WD_RST_H
-+#include <asm/arch-stv0991/hardware.h>
-+
-+struct stv0991_wd_ru {
-+ u32 wdru_config;
-+ u32 wdru_ctrl1;
-+ u32 wdru_ctrl2;
-+ u32 wdru_tim;
-+ u32 wdru_count;
-+ u32 wdru_stat;
-+ u32 wdru_wrlock;
-+};
-+
-+struct stv0991_wd_ru *const stv0991_wd_ru_ptr = \
-+ (struct stv0991_wd_ru *)WDRU_BASE_ADDR;
-+
-+/* Watchdog control register */
-+#define WDRU_RST_SYS 0x1
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-tegra/tegra_i2c.h u-boot/arch/arm/include/asm/arch-tegra/tegra_i2c.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-tegra/tegra_i2c.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-tegra/tegra_i2c.h 2015-01-01 17:34:32.097505809 +0100
-@@ -167,6 +167,6 @@
- *
- * @return number of bus, or -1 if there is no DVC active
- */
--int tegra_i2c_get_dvc_bus_num(void);
-+int tegra_i2c_get_dvc_bus(struct udevice **busp);
-
- #endif /* _TEGRA_I2C_H_ */
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-vf610/imx-regs.h u-boot/arch/arm/include/asm/arch-vf610/imx-regs.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/arch-vf610/imx-regs.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/arch-vf610/imx-regs.h 2015-01-01 17:34:32.109505612 +0100
-@@ -256,6 +256,14 @@
- #define DDRMC_CR161_TODTH_RD(v) (((v) & 0xf) << 8)
- #define DDRMC_CR161_TODTH_WR(v) ((v) & 0xf)
-
-+/* System Reset Controller (SRC) */
-+#define SRC_SRSR_SW_RST (0x1 << 18)
-+#define SRC_SRSR_RESETB (0x1 << 7)
-+#define SRC_SRSR_JTAG_RST (0x1 << 5)
-+#define SRC_SRSR_WDOG_M4 (0x1 << 4)
-+#define SRC_SRSR_WDOG_A5 (0x1 << 3)
-+#define SRC_SRSR_POR_RST (0x1 << 0)
-+
- #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
- #include <asm/types.h>
-
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/kona-common/clk.h u-boot/arch/arm/include/asm/kona-common/clk.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/kona-common/clk.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/kona-common/clk.h 2015-01-01 17:34:32.113505547 +0100
-@@ -25,5 +25,6 @@
- struct clk *clk_get_parent(struct clk *clk);
- int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep);
- int clk_bsc_enable(void *base);
-+int clk_usb_otg_enable(void *base);
-
- #endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/pcie_layerscape.h u-boot/arch/arm/include/asm/pcie_layerscape.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/pcie_layerscape.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/arm/include/asm/pcie_layerscape.h 2015-01-01 17:34:32.125505350 +0100
-@@ -0,0 +1,13 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __PCIE_LAYERSCAPE_H_
-+#define __PCIE_LAYERSCAPE_H_
-+
-+void pci_init_board(void);
-+void ft_pcie_setup(void *blob, bd_t *bd);
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/semihosting.h u-boot/arch/arm/include/asm/semihosting.h
---- u-boot-2015.01-rc3/arch/arm/include/asm/semihosting.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/include/asm/semihosting.h 2015-01-01 17:34:32.125505350 +0100
-@@ -12,10 +12,6 @@
- * code for more information.
- */
- int smh_load(const char *fname, void *memp, int avail, int verbose);
--int smh_read(int fd, void *memp, int len);
--int smh_open(const char *fname, char *modestr);
--int smh_close(int fd);
--int smh_len_fd(int fd);
--int smh_len(const char *fname);
-+long smh_len(const char *fname);
-
- #endif /* __SEMIHOSTING_H__ */
-diff -ruN u-boot-2015.01-rc3/arch/arm/Kconfig u-boot/arch/arm/Kconfig
---- u-boot-2015.01-rc3/arch/arm/Kconfig 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/Kconfig 2015-01-01 17:34:31.989507580 +0100
-@@ -341,6 +341,10 @@
- bool "Support spear600"
- select CPU_ARM926EJS
-
-+config TARGET_STV0991
-+ bool "Support stv0991"
-+ select CPU_V7
-+
- config TARGET_X600
- bool "Support x600"
- select CPU_ARM926EJS
-@@ -650,6 +654,7 @@
-
- config TARGET_TBS2910
- bool "Support tbs2910"
-+ select CPU_V7
-
- config TARGET_TQMA6
- bool "TQ Systems TQMa6 board"
-@@ -728,12 +733,14 @@
- select ARM64
-
- config TARGET_LS1021AQDS
-- bool "Support ls1021aqds_nor"
-+ bool "Support ls1021aqds"
- select CPU_V7
-+ select SUPPORT_SPL
-
- config TARGET_LS1021ATWR
-- bool "Support ls1021atwr_nor"
-+ bool "Support ls1021atwr"
- select CPU_V7
-+ select SUPPORT_SPL
-
- config TARGET_BALLOON3
- bool "Support balloon3"
-@@ -793,6 +800,7 @@
- bool "Panasonic UniPhier platform"
- select CPU_V7
- select SUPPORT_SPL
-+ select SPL
- select OF_CONTROL if !SPL_BUILD
-
- endchoice
-@@ -953,6 +961,7 @@
- source "board/spear/x600/Kconfig"
- source "board/st-ericsson/snowball/Kconfig"
- source "board/st-ericsson/u8500/Kconfig"
-+source "board/st/stv0991/Kconfig"
- source "board/sunxi/Kconfig"
- source "board/syteco/jadecpu/Kconfig"
- source "board/syteco/zmx25/Kconfig"
-diff -ruN u-boot-2015.01-rc3/arch/arm/lib/semihosting.c u-boot/arch/arm/lib/semihosting.c
---- u-boot-2015.01-rc3/arch/arm/lib/semihosting.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/arm/lib/semihosting.c 2015-01-01 17:34:32.133505219 +0100
-@@ -26,9 +26,9 @@
- /*
- * Call the handler
- */
--static int smh_trap(unsigned int sysnum, void *addr)
-+static long smh_trap(unsigned int sysnum, void *addr)
- {
-- register int result asm("r0");
-+ register long result asm("r0");
- #if defined(CONFIG_ARM64)
- asm volatile ("hlt #0xf000" : "=r" (result) : "0"(sysnum), "r"(addr));
- #else
-@@ -39,167 +39,164 @@
- }
-
- /*
-- * Open, load a file into memory, and close it. Check that the available space
-- * is sufficient to store the entire file. Return the bytes actually read from
-- * the file as seen by the read function. The verbose flag enables some extra
-- * printing of successful read status.
-+ * Open a file on the host. Mode is "r" or "rb" currently. Returns a file
-+ * descriptor or -1 on error.
- */
--int smh_load(const char *fname, void *memp, int avail, int verbose)
-+static long smh_open(const char *fname, char *modestr)
- {
-- int ret, fd, len;
--
-- ret = -1;
--
-- debug("%s: fname \'%s\', avail %u, memp %p\n", __func__, fname,
-- avail, memp);
--
-- /* Open the file */
-- fd = smh_open(fname, "rb");
-- if (fd == -1)
-- return ret;
-+ long fd;
-+ unsigned long mode;
-+ struct smh_open_s {
-+ const char *fname;
-+ unsigned long mode;
-+ size_t len;
-+ } open;
-
-- /* Get the file length */
-- ret = smh_len_fd(fd);
-- if (ret == -1) {
-- smh_close(fd);
-- return ret;
-- }
-+ debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr);
-
-- /* Check that the file will fit in the supplied buffer */
-- if (ret > avail) {
-- printf("%s: ERROR ret %d, avail %u\n", __func__, ret,
-- avail);
-- smh_close(fd);
-- return ret;
-+ /* Check the file mode */
-+ if (!(strcmp(modestr, "r"))) {
-+ mode = MODE_READ;
-+ } else if (!(strcmp(modestr, "rb"))) {
-+ mode = MODE_READBIN;
-+ } else {
-+ printf("%s: ERROR mode \'%s\' not supported\n", __func__,
-+ modestr);
-+ return -1;
- }
-
-- len = ret;
--
-- /* Read the file into the buffer */
-- ret = smh_read(fd, memp, len);
-- if (ret == 0) {
-- /* Print successful load information if requested */
-- if (verbose) {
-- printf("\n%s\n", fname);
-- printf(" 0x%8p dest\n", memp);
-- printf(" 0x%08x size\n", len);
-- printf(" 0x%08x avail\n", avail);
-- }
-- }
-+ open.fname = fname;
-+ open.len = strlen(fname);
-+ open.mode = mode;
-
-- /* Close the file */
-- smh_close(fd);
-+ /* Open the file on the host */
-+ fd = smh_trap(SYSOPEN, &open);
-+ if (fd == -1)
-+ printf("%s: ERROR fd %ld for file \'%s\'\n", __func__, fd,
-+ fname);
-
-- return ret;
-+ return fd;
- }
-
- /*
- * Read 'len' bytes of file into 'memp'. Returns 0 on success, else failure
- */
--int smh_read(int fd, void *memp, int len)
-+static long smh_read(long fd, void *memp, size_t len)
- {
-- int ret;
-+ long ret;
- struct smh_read_s {
-- int fd;
-+ long fd;
- void *memp;
-- int len;
-+ size_t len;
- } read;
-
-- debug("%s: fd %d, memp %p, len %d\n", __func__, fd, memp, len);
-+ debug("%s: fd %ld, memp %p, len %lu\n", __func__, fd, memp, len);
-
- read.fd = fd;
- read.memp = memp;
- read.len = len;
-
- ret = smh_trap(SYSREAD, &read);
-- if (ret == 0) {
-- return 0;
-- } else {
-+ if (ret < 0) {
- /*
- * The ARM handler allows for returning partial lengths,
- * but in practice this never happens so rather than create
- * hard to maintain partial read loops and such, just fail
- * with an error message.
- */
-- printf("%s: ERROR ret %d, fd %d, len %u memp %p\n",
-+ printf("%s: ERROR ret %ld, fd %ld, len %lu memp %p\n",
- __func__, ret, fd, len, memp);
-+ return -1;
- }
-- return ret;
-+
-+ return 0;
- }
-
- /*
-- * Open a file on the host. Mode is "r" or "rb" currently. Returns a file
-- * descriptor or -1 on error.
-+ * Close the file using the file descriptor
- */
--int smh_open(const char *fname, char *modestr)
-+static long smh_close(long fd)
- {
-- int ret, fd, mode;
-- struct smh_open_s {
-- const char *fname;
-- unsigned int mode;
-- unsigned int len;
-- } open;
-+ long ret;
-
-- debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr);
--
-- ret = -1;
-+ debug("%s: fd %ld\n", __func__, fd);
-
-- /* Check the file mode */
-- if (!(strcmp(modestr, "r"))) {
-- mode = MODE_READ;
-- } else if (!(strcmp(modestr, "rb"))) {
-- mode = MODE_READBIN;
-- } else {
-- printf("%s: ERROR mode \'%s\' not supported\n", __func__,
-- modestr);
-- return ret;
-- }
--
-- open.fname = fname;
-- open.len = strlen(fname);
-- open.mode = mode;
--
-- /* Open the file on the host */
-- fd = smh_trap(SYSOPEN, &open);
-- if (fd == -1)
-- printf("%s: ERROR fd %d for file \'%s\'\n", __func__, fd,
-- fname);
-+ ret = smh_trap(SYSCLOSE, &fd);
-+ if (ret == -1)
-+ printf("%s: ERROR fd %ld\n", __func__, fd);
-
-- return fd;
-+ return ret;
- }
-
- /*
-- * Close the file using the file descriptor
-+ * Get the file length from the file descriptor
- */
--int smh_close(int fd)
-+static long smh_len_fd(long fd)
- {
-- int ret;
-- long fdlong;
-+ long ret;
-
-- debug("%s: fd %d\n", __func__, fd);
-+ debug("%s: fd %ld\n", __func__, fd);
-
-- fdlong = (long)fd;
-- ret = smh_trap(SYSCLOSE, &fdlong);
-+ ret = smh_trap(SYSFLEN, &fd);
- if (ret == -1)
-- printf("%s: ERROR fd %d\n", __func__, fd);
-+ printf("%s: ERROR ret %ld, fd %ld\n", __func__, ret, fd);
-
- return ret;
- }
-
- /*
-- * Get the file length from the file descriptor
-+ * Open, load a file into memory, and close it. Check that the available space
-+ * is sufficient to store the entire file. Return the bytes actually read from
-+ * the file as seen by the read function. The verbose flag enables some extra
-+ * printing of successful read status.
- */
--int smh_len_fd(int fd)
-+int smh_load(const char *fname, void *memp, int avail, int verbose)
- {
-- int ret;
-- long fdlong;
-+ long ret;
-+ long fd;
-+ size_t len;
-
-- debug("%s: fd %d\n", __func__, fd);
-+ ret = -1;
-
-- fdlong = (long)fd;
-- ret = smh_trap(SYSFLEN, &fdlong);
-- if (ret == -1)
-- printf("%s: ERROR ret %d\n", __func__, ret);
-+ debug("%s: fname \'%s\', avail %u, memp %p\n", __func__, fname,
-+ avail, memp);
-+
-+ /* Open the file */
-+ fd = smh_open(fname, "rb");
-+ if (fd == -1)
-+ return -1;
-+
-+ /* Get the file length */
-+ ret = smh_len_fd(fd);
-+ if (ret == -1) {
-+ smh_close(fd);
-+ return -1;
-+ }
-+
-+ /* Check that the file will fit in the supplied buffer */
-+ if (ret > avail) {
-+ printf("%s: ERROR ret %ld, avail %u\n", __func__, ret,
-+ avail);
-+ smh_close(fd);
-+ return -1;
-+ }
-+
-+ len = ret;
-+
-+ /* Read the file into the buffer */
-+ ret = smh_read(fd, memp, len);
-+ if (ret == 0) {
-+ /* Print successful load information if requested */
-+ if (verbose) {
-+ printf("\n%s\n", fname);
-+ printf(" 0x%8p dest\n", memp);
-+ printf(" 0x%08lx size\n", len);
-+ printf(" 0x%08x avail\n", avail);
-+ }
-+ }
-+
-+ /* Close the file */
-+ smh_close(fd);
-
- return ret;
- }
-@@ -207,26 +204,32 @@
- /*
- * Get the file length from the filename
- */
--int smh_len(const char *fname)
-+long smh_len(const char *fname)
- {
-- int ret, fd, len;
-+ long ret;
-+ long fd;
-+ long len;
-
- debug("%s: file \'%s\'\n", __func__, fname);
-
- /* Open the file */
- fd = smh_open(fname, "rb");
-- if (fd == -1)
-+ if (fd < 0)
- return fd;
-
- /* Get the file length */
- len = smh_len_fd(fd);
-+ if (len < 0) {
-+ smh_close(fd);
-+ return len;
-+ }
-
- /* Close the file */
- ret = smh_close(fd);
-- if (ret == -1)
-+ if (ret < 0)
- return ret;
-
-- debug("%s: returning len %d\n", __func__, len);
-+ debug("%s: returning len %ld\n", __func__, len);
-
- /* Return the file length (or -1 error indication) */
- return len;
-diff -ruN u-boot-2015.01-rc3/arch/microblaze/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/microblaze/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h
-diff -ruN u-boot-2015.01-rc3/arch/microblaze/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/microblaze/dts/include/dt-bindings/reset/altr,rst-mgr.h
-diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/p5040_ids.c u-boot/arch/powerpc/cpu/mpc85xx/p5040_ids.c
---- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/p5040_ids.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/powerpc/cpu/mpc85xx/p5040_ids.c 2015-01-01 17:34:32.221503777 +0100
-@@ -49,23 +49,23 @@
-
- #ifdef CONFIG_SYS_DPAA_FMAN
- struct liodn_id_table fman1_liodn_tbl[] = {
-- SET_FMAN_RX_1G_LIODN(1, 0, 6),
-- SET_FMAN_RX_1G_LIODN(1, 1, 7),
-- SET_FMAN_RX_1G_LIODN(1, 2, 8),
-- SET_FMAN_RX_1G_LIODN(1, 3, 9),
-- SET_FMAN_RX_1G_LIODN(1, 4, 10),
-- SET_FMAN_RX_10G_LIODN(1, 0, 11),
-+ SET_FMAN_RX_1G_LIODN(1, 0, 11),
-+ SET_FMAN_RX_1G_LIODN(1, 1, 12),
-+ SET_FMAN_RX_1G_LIODN(1, 2, 13),
-+ SET_FMAN_RX_1G_LIODN(1, 3, 14),
-+ SET_FMAN_RX_1G_LIODN(1, 4, 15),
-+ SET_FMAN_RX_10G_LIODN(1, 0, 16),
- };
- int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
-
- #if (CONFIG_SYS_NUM_FMAN == 2)
- struct liodn_id_table fman2_liodn_tbl[] = {
-- SET_FMAN_RX_1G_LIODN(2, 0, 12),
-- SET_FMAN_RX_1G_LIODN(2, 1, 13),
-- SET_FMAN_RX_1G_LIODN(2, 2, 14),
-- SET_FMAN_RX_1G_LIODN(2, 3, 15),
-- SET_FMAN_RX_1G_LIODN(2, 4, 16),
-- SET_FMAN_RX_10G_LIODN(2, 0, 17),
-+ SET_FMAN_RX_1G_LIODN(2, 0, 17),
-+ SET_FMAN_RX_1G_LIODN(2, 1, 18),
-+ SET_FMAN_RX_1G_LIODN(2, 2, 19),
-+ SET_FMAN_RX_1G_LIODN(2, 3, 20),
-+ SET_FMAN_RX_1G_LIODN(2, 4, 21),
-+ SET_FMAN_RX_10G_LIODN(2, 0, 22),
- };
- int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
- #endif
-diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/portals.c u-boot/arch/powerpc/cpu/mpc85xx/portals.c
---- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/portals.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/powerpc/cpu/mpc85xx/portals.c 2015-01-01 17:34:32.221503777 +0100
-@@ -14,9 +14,46 @@
- #include <asm/fsl_portals.h>
- #include <asm/fsl_liodn.h>
-
-+#define MAX_BPORTALS (CONFIG_SYS_BMAN_CINH_SIZE / CONFIG_SYS_BMAN_SP_CINH_SIZE)
-+#define MAX_QPORTALS (CONFIG_SYS_QMAN_CINH_SIZE / CONFIG_SYS_QMAN_SP_CINH_SIZE)
-+static void inhibit_portals(void __iomem *addr, int max_portals,
-+ int arch_max_portals, int portal_cinh_size)
-+{
-+ uint32_t val;
-+ int i;
-+
-+ /* arch_max_portals is the maximum based on memory size. This includes
-+ * the reserved memory in the SoC. max_portals the number of physical
-+ * portals in the SoC */
-+ if (max_portals > arch_max_portals) {
-+ printf("ERROR: portal config error\n");
-+ max_portals = arch_max_portals;
-+ }
-+
-+ for (i = 0; i < max_portals; i++) {
-+ out_be32(addr, -1);
-+ val = in_be32(addr);
-+ if (!val) {
-+ printf("ERROR: Stopped after %d portals\n", i);
-+ goto done;
-+ }
-+ addr += portal_cinh_size;
-+ }
-+#ifdef DEBUG
-+ printf("Cleared %d portals\n", i);
-+#endif
-+done:
-+
-+ return;
-+}
-+
- void setup_portals(void)
- {
- ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_QMAN_ADDR;
-+ void __iomem *bpaddr = (void *)CONFIG_SYS_BMAN_CINH_BASE +
-+ CONFIG_SYS_BMAN_SWP_ISDR_REG;
-+ void __iomem *qpaddr = (void *)CONFIG_SYS_QMAN_CINH_BASE +
-+ CONFIG_SYS_QMAN_SWP_ISDR_REG;
- #ifdef CONFIG_FSL_CORENET
- int i;
-
-@@ -38,6 +75,12 @@
- out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32));
- #endif
- out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS);
-+
-+ /* Change default state of BMan ISDR portals to all 1s */
-+ inhibit_portals(bpaddr, CONFIG_SYS_BMAN_NUM_PORTALS, MAX_BPORTALS,
-+ CONFIG_SYS_BMAN_SP_CINH_SIZE);
-+ inhibit_portals(qpaddr, CONFIG_SYS_QMAN_NUM_PORTALS, MAX_QPORTALS,
-+ CONFIG_SYS_QMAN_SP_CINH_SIZE);
- }
-
- /* Update portal containter to match LAW setup of portal in phy map */
-diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/tlb.c u-boot/arch/powerpc/cpu/mpc85xx/tlb.c
---- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/tlb.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/powerpc/cpu/mpc85xx/tlb.c 2015-01-01 17:34:32.221503777 +0100
-@@ -299,12 +299,16 @@
- {
- unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
- u64 memsize = (u64)memsize_in_meg << 20;
-+ u64 size;
-
-- memsize = min(memsize, (u64)CONFIG_MAX_MEM_MAPPED);
-- memsize = tlb_map_range(ram_tlb_address, p_addr, memsize, TLB_MAP_RAM);
-+ size = min(memsize, (u64)CONFIG_MAX_MEM_MAPPED);
-+ size = tlb_map_range(ram_tlb_address, p_addr, size, TLB_MAP_RAM);
-
-- if (memsize)
-- print_size(memsize, " left unmapped\n");
-+ if (size || memsize > CONFIG_MAX_MEM_MAPPED) {
-+ print_size(memsize > CONFIG_MAX_MEM_MAPPED ?
-+ memsize - CONFIG_MAX_MEM_MAPPED + size : size,
-+ " left unmapped\n");
-+ }
-
- return memsize_in_meg;
- }
-diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc8xxx/fdt.c u-boot/arch/powerpc/cpu/mpc8xxx/fdt.c
---- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc8xxx/fdt.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/powerpc/cpu/mpc8xxx/fdt.c 2015-01-01 17:34:32.225503711 +0100
-@@ -73,110 +73,6 @@
- }
- #endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
-
--#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
--static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
-- const char *phy_type, int start_offset)
--{
-- const char *compat_dr = "fsl-usb2-dr";
-- const char *compat_mph = "fsl-usb2-mph";
-- const char *prop_mode = "dr_mode";
-- const char *prop_type = "phy_type";
-- const char *node_type = NULL;
-- int node_offset;
-- int err;
--
-- node_offset = fdt_node_offset_by_compatible(blob,
-- start_offset, compat_mph);
-- if (node_offset < 0) {
-- node_offset = fdt_node_offset_by_compatible(blob,
-- start_offset, compat_dr);
-- if (node_offset < 0) {
-- printf("WARNING: could not find compatible"
-- " node %s or %s: %s.\n", compat_mph,
-- compat_dr, fdt_strerror(node_offset));
-- return -1;
-- } else
-- node_type = compat_dr;
-- } else
-- node_type = compat_mph;
--
-- if (mode) {
-- err = fdt_setprop(blob, node_offset, prop_mode, mode,
-- strlen(mode) + 1);
-- if (err < 0)
-- printf("WARNING: could not set %s for %s: %s.\n",
-- prop_mode, node_type, fdt_strerror(err));
-- }
--
-- if (phy_type) {
-- err = fdt_setprop(blob, node_offset, prop_type, phy_type,
-- strlen(phy_type) + 1);
-- if (err < 0)
-- printf("WARNING: could not set %s for %s: %s.\n",
-- prop_type, node_type, fdt_strerror(err));
-- }
--
-- return node_offset;
--}
--
--void fdt_fixup_dr_usb(void *blob, bd_t *bd)
--{
-- const char *modes[] = { "host", "peripheral", "otg" };
-- const char *phys[] = { "ulpi", "utmi" };
-- int usb_mode_off = -1;
-- int usb_phy_off = -1;
-- char str[5];
-- int i, j;
--
-- for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
-- const char *dr_mode_type = NULL;
-- const char *dr_phy_type = NULL;
-- int mode_idx = -1, phy_idx = -1;
-- snprintf(str, 5, "%s%d", "usb", i);
-- if (hwconfig(str)) {
-- for (j = 0; j < ARRAY_SIZE(modes); j++) {
-- if (hwconfig_subarg_cmp(str, "dr_mode",
-- modes[j])) {
-- mode_idx = j;
-- break;
-- }
-- }
--
-- for (j = 0; j < ARRAY_SIZE(phys); j++) {
-- if (hwconfig_subarg_cmp(str, "phy_type",
-- phys[j])) {
-- phy_idx = j;
-- break;
-- }
-- }
--
-- if (mode_idx < 0 && phy_idx < 0) {
-- printf("WARNING: invalid phy or mode\n");
-- return;
-- }
--
-- if (mode_idx > -1)
-- dr_mode_type = modes[mode_idx];
--
-- if (phy_idx > -1)
-- dr_phy_type = phys[phy_idx];
-- }
--
-- usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
-- dr_mode_type, NULL, usb_mode_off);
--
-- if (usb_mode_off < 0)
-- return;
--
-- usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
-- NULL, dr_phy_type, usb_phy_off);
--
-- if (usb_phy_off < 0)
-- return;
-- }
--}
--#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
--
- /*
- * update crypto node properties to a specified revision of the SEC
- * called with sec_rev == 0 if not on an E processor
-diff -ruN u-boot-2015.01-rc3/arch/sandbox/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/sandbox/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h
-diff -ruN u-boot-2015.01-rc3/arch/sandbox/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/sandbox/dts/include/dt-bindings/reset/altr,rst-mgr.h
-diff -ruN u-boot-2015.01-rc3/arch/sandbox/dts/sandbox.dts u-boot/arch/sandbox/dts/sandbox.dts
---- u-boot-2015.01-rc3/arch/sandbox/dts/sandbox.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/sandbox/dts/sandbox.dts 2015-01-01 17:34:32.241503449 +0100
-@@ -134,6 +134,23 @@
- num-gpios = <20>;
- };
-
-+ i2c@0 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+ compatible = "sandbox,i2c";
-+ clock-frequency = <400000>;
-+ eeprom@2c {
-+ reg = <0x2c>;
-+ compatible = "i2c-eeprom";
-+ emul {
-+ compatible = "sandbox,i2c-eeprom";
-+ sandbox,filename = "i2c.bin";
-+ sandbox,size = <128>;
-+ };
-+ };
-+ };
-+
- spi@0 {
- #address-cells = <1>;
- #size-cells = <0>;
-diff -ruN u-boot-2015.01-rc3/arch/sandbox/include/asm/test.h u-boot/arch/sandbox/include/asm/test.h
---- u-boot-2015.01-rc3/arch/sandbox/include/asm/test.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/sandbox/include/asm/test.h 2015-01-01 17:34:32.241503449 +0100
-@@ -0,0 +1,26 @@
-+/*
-+ * Test-related constants for sandbox
-+ *
-+ * Copyright (c) 2014 Google, Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __ASM_TEST_H
-+#define __ASM_TEST_H
-+
-+/* The sandbox driver always permits an I2C device with this address */
-+#define SANDBOX_I2C_TEST_ADDR 0x59
-+
-+enum sandbox_i2c_eeprom_test_mode {
-+ SIE_TEST_MODE_NONE,
-+ /* Permits read/write of only one byte per I2C transaction */
-+ SIE_TEST_MODE_SINGLE_BYTE,
-+};
-+
-+void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev,
-+ enum sandbox_i2c_eeprom_test_mode mode);
-+
-+void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len);
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/cpu.c u-boot/arch/x86/cpu/ivybridge/cpu.c
---- u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/cpu.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/cpu/ivybridge/cpu.c 2015-01-01 17:34:32.249503317 +0100
-@@ -263,6 +263,7 @@
- static int report_bist_failure(void)
- {
- if (gd->arch.bist != 0) {
-+ post_code(POST_BIST_FAILURE);
- printf("BIST failed: %08x\n", gd->arch.bist);
- return -EFAULT;
- }
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/microcode_intel.c u-boot/arch/x86/cpu/ivybridge/microcode_intel.c
---- u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/microcode_intel.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/cpu/ivybridge/microcode_intel.c 2015-01-01 17:34:32.249503317 +0100
-@@ -40,6 +40,8 @@
- update->data = fdt_getprop(blob, node, "data", &update->size);
- if (!update->data)
- return -EINVAL;
-+ update->data += 48;
-+ update->size -= 48;
-
- update->header_version = fdtdec_get_int(blob, node,
- "intel,header-version", 0);
-@@ -48,17 +50,17 @@
- update->date_code = fdtdec_get_int(blob, node,
- "intel,date-code", 0);
- update->processor_signature = fdtdec_get_int(blob, node,
-- "intel.processor-signature", 0);
-+ "intel,processor-signature", 0);
- update->checksum = fdtdec_get_int(blob, node, "intel,checksum", 0);
- update->loader_revision = fdtdec_get_int(blob, node,
-- "loader-revision", 0);
-+ "intel,loader-revision", 0);
- update->processor_flags = fdtdec_get_int(blob, node,
-- "processor-flags", 0);
-+ "intel,processor-flags", 0);
-
- return 0;
- }
-
--static uint32_t microcode_read_rev(void)
-+static inline uint32_t microcode_read_rev(void)
- {
- /*
- * Some Intel CPUs can be very finicky about the CPUID sequence used.
-@@ -114,6 +116,7 @@
- {
- struct microcode_update cpu, update;
- const void *blob = gd->fdt_blob;
-+ int skipped;
- int count;
- int node;
- int ret;
-@@ -121,12 +124,13 @@
- microcode_read_cpu(&cpu);
- node = 0;
- count = 0;
-+ skipped = 0;
- do {
- node = fdtdec_next_compatible(blob, node,
- COMPAT_INTEL_MICROCODE);
- if (node < 0) {
- debug("%s: Found %d updates\n", __func__, count);
-- return count ? 0 : -ENOENT;
-+ return count ? 0 : skipped ? -EEXIST : -ENOENT;
- }
-
- ret = microcode_decode_node(blob, node, &update);
-@@ -135,12 +139,15 @@
- ret);
- return ret;
- }
-- if (update.processor_signature == cpu.processor_signature &&
-- (update.processor_flags & cpu.processor_flags)) {
-- debug("%s: Update already exists\n", __func__);
-- return -EEXIST;
-+ if (!(update.processor_signature == cpu.processor_signature &&
-+ (update.processor_flags & cpu.processor_flags))) {
-+ debug("%s: Skipping non-matching update, sig=%x, pf=%x\n",
-+ __func__, update.processor_signature,
-+ update.processor_flags);
-+ skipped++;
-+ continue;
- }
--
-+ ret = microcode_read_rev();
- wrmsr(0x79, (ulong)update.data, 0);
- debug("microcode: updated to revision 0x%x date=%04x-%02x-%02x\n",
- microcode_read_rev(), update.date_code & 0xffff,
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/sdram.c u-boot/arch/x86/cpu/ivybridge/sdram.c
---- u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/sdram.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/cpu/ivybridge/sdram.c 2015-01-01 17:34:32.253503252 +0100
-@@ -177,7 +177,7 @@
-
- debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data));
-
-- data = (char *)CONFIG_X86_MRC_START;
-+ data = (char *)CONFIG_X86_MRC_ADDR;
- if (data) {
- int rv;
- int (*func)(struct pei_data *);
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/Makefile u-boot/arch/x86/cpu/Makefile
---- u-boot-2015.01-rc3/arch/x86/cpu/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/cpu/Makefile 2015-01-01 17:34:32.249503317 +0100
-@@ -15,6 +15,7 @@
- obj-$(CONFIG_SYS_COREBOOT) += coreboot/
- obj-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += ivybridge/
- obj-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ivybridge/
-+obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/
- obj-y += lapic.o
- obj-$(CONFIG_PCI) += pci.o
- obj-y += turbo.o
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_configs.c u-boot/arch/x86/cpu/queensbay/fsp_configs.c
---- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_configs.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/cpu/queensbay/fsp_configs.c 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,20 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/fsp/fsp_support.h>
-+
-+void update_fsp_upd(struct upd_region *fsp_upd)
-+{
-+ /* Override any UPD setting if required */
-+
-+ /* Uncomment the line below to enable DEBUG message */
-+ /* fsp_upd->serial_dbgport_type = 1; */
-+
-+ /* Examples on how to initialize the pointers in UPD region */
-+ /* fsp_upd->pcd_example = (EXAMPLE_DATA *)&example; */
-+}
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_support.c u-boot/arch/x86/cpu/queensbay/fsp_support.c
---- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_support.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/cpu/queensbay/fsp_support.c 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,401 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/fsp/fsp_support.h>
-+#include <asm/post.h>
-+
-+/**
-+ * Compares two GUIDs
-+ *
-+ * If the GUIDs are identical then true is returned.
-+ * If there are any bit differences in the two GUIDs, then false is returned.
-+ *
-+ * @guid1: A pointer to a 128 bit GUID.
-+ * @guid2: A pointer to a 128 bit GUID.
-+ *
-+ * @retval true: guid1 and guid2 are identical.
-+ * @retval false: guid1 and guid2 are not identical.
-+ */
-+static bool compare_guid(const struct efi_guid *guid1,
-+ const struct efi_guid *guid2)
-+{
-+ if (memcmp(guid1, guid2, sizeof(struct efi_guid)) == 0)
-+ return true;
-+ else
-+ return false;
-+}
-+
-+u32 __attribute__((optimize("O0"))) find_fsp_header(void)
-+{
-+ /*
-+ * This function may be called before the a stack is established,
-+ * so special care must be taken. First, it cannot declare any local
-+ * variable using stack. Only register variable can be used here.
-+ * Secondly, some compiler version will add prolog or epilog code
-+ * for the C function. If so the function call may not work before
-+ * stack is ready.
-+ *
-+ * GCC 4.8.1 has been verified to be working for the following codes.
-+ */
-+ volatile register u8 *fsp asm("eax");
-+
-+ /* Initalize the FSP base */
-+ fsp = (u8 *)CONFIG_FSP_ADDR;
-+
-+ /* Check the FV signature, _FVH */
-+ if (((struct fv_header *)fsp)->sign == EFI_FVH_SIGNATURE) {
-+ /* Go to the end of the FV header and align the address */
-+ fsp += ((struct fv_header *)fsp)->ext_hdr_off;
-+ fsp += ((struct fv_ext_header *)fsp)->ext_hdr_size;
-+ fsp = (u8 *)(((u32)fsp + 7) & 0xFFFFFFF8);
-+ } else {
-+ fsp = 0;
-+ }
-+
-+ /* Check the FFS GUID */
-+ if (fsp &&
-+ ((struct ffs_file_header *)fsp)->name.data1 == FSP_GUID_DATA1 &&
-+ ((struct ffs_file_header *)fsp)->name.data2 == FSP_GUID_DATA2 &&
-+ ((struct ffs_file_header *)fsp)->name.data3 == FSP_GUID_DATA3 &&
-+ ((struct ffs_file_header *)fsp)->name.data4[0] == FSP_GUID_DATA4_0 &&
-+ ((struct ffs_file_header *)fsp)->name.data4[1] == FSP_GUID_DATA4_1 &&
-+ ((struct ffs_file_header *)fsp)->name.data4[2] == FSP_GUID_DATA4_2 &&
-+ ((struct ffs_file_header *)fsp)->name.data4[3] == FSP_GUID_DATA4_3 &&
-+ ((struct ffs_file_header *)fsp)->name.data4[4] == FSP_GUID_DATA4_4 &&
-+ ((struct ffs_file_header *)fsp)->name.data4[5] == FSP_GUID_DATA4_5 &&
-+ ((struct ffs_file_header *)fsp)->name.data4[6] == FSP_GUID_DATA4_6 &&
-+ ((struct ffs_file_header *)fsp)->name.data4[7] == FSP_GUID_DATA4_7) {
-+ /* Add the FFS header size to find the raw section header */
-+ fsp += sizeof(struct ffs_file_header);
-+ } else {
-+ fsp = 0;
-+ }
-+
-+ if (fsp &&
-+ ((struct raw_section *)fsp)->type == EFI_SECTION_RAW) {
-+ /* Add the raw section header size to find the FSP header */
-+ fsp += sizeof(struct raw_section);
-+ } else {
-+ fsp = 0;
-+ }
-+
-+ return (u32)fsp;
-+}
-+
-+void fsp_continue(struct shared_data *shared_data, u32 status, void *hob_list)
-+{
-+ u32 stack_len;
-+ u32 stack_base;
-+ u32 stack_top;
-+
-+ post_code(POST_MRC);
-+
-+ assert(status == 0);
-+
-+ /* Get the migrated stack in normal memory */
-+ stack_base = (u32)fsp_get_bootloader_tmp_mem(hob_list, &stack_len);
-+ assert(stack_base != 0);
-+ stack_top = stack_base + stack_len - sizeof(u32);
-+
-+ /*
-+ * Old stack base is stored at the very end of the stack top,
-+ * use it to calculate the migrated shared data base
-+ */
-+ shared_data = (struct shared_data *)(stack_base +
-+ ((u32)shared_data - *(u32 *)stack_top));
-+
-+ /* The boot loader main function entry */
-+ fsp_init_done(hob_list);
-+}
-+
-+void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf)
-+{
-+ struct shared_data shared_data;
-+ fsp_init_f init;
-+ struct fsp_init_params params;
-+ struct fspinit_rtbuf rt_buf;
-+ struct vpd_region *fsp_vpd;
-+ struct fsp_header *fsp_hdr;
-+ struct fsp_init_params *params_ptr;
-+ struct upd_region *fsp_upd;
-+
-+ fsp_hdr = (struct fsp_header *)find_fsp_header();
-+ if (fsp_hdr == NULL) {
-+ /* No valid FSP info header was found */
-+ panic("Invalid FSP header");
-+ }
-+
-+ fsp_upd = (struct upd_region *)&shared_data.fsp_upd;
-+ memset(&rt_buf, 0, sizeof(struct fspinit_rtbuf));
-+
-+ /* Reserve a gap in stack top */
-+ rt_buf.common.stack_top = (u32 *)stack_top - 32;
-+ rt_buf.common.boot_mode = boot_mode;
-+ rt_buf.common.upd_data = (struct upd_region *)fsp_upd;
-+
-+ /* Get VPD region start */
-+ fsp_vpd = (struct vpd_region *)(fsp_hdr->img_base +
-+ fsp_hdr->cfg_region_off);
-+
-+ /* Verifify the VPD data region is valid */
-+ assert((fsp_vpd->img_rev == VPD_IMAGE_REV) &&
-+ (fsp_vpd->sign == VPD_IMAGE_ID));
-+
-+ /* Copy default data from Flash */
-+ memcpy(fsp_upd, (void *)(fsp_hdr->img_base + fsp_vpd->upd_offset),
-+ sizeof(struct upd_region));
-+
-+ /* Verifify the UPD data region is valid */
-+ assert(fsp_upd->terminator == UPD_TERMINATOR);
-+
-+ /* Override any UPD setting if required */
-+ update_fsp_upd(fsp_upd);
-+
-+ memset(¶ms, 0, sizeof(struct fsp_init_params));
-+ params.nvs_buf = nvs_buf;
-+ params.rt_buf = (struct fspinit_rtbuf *)&rt_buf;
-+ params.continuation = (fsp_continuation_f)asm_continuation;
-+
-+ init = (fsp_init_f)(fsp_hdr->img_base + fsp_hdr->fsp_init);
-+ params_ptr = ¶ms;
-+
-+ shared_data.fsp_hdr = fsp_hdr;
-+ shared_data.stack_top = (u32 *)stack_top;
-+
-+ post_code(POST_PRE_MRC);
-+
-+ /*
-+ * Use ASM code to ensure the register value in EAX & ECX
-+ * will be passed into BlContinuationFunc
-+ */
-+ asm volatile (
-+ "pushl %0;"
-+ "call *%%eax;"
-+ ".global asm_continuation;"
-+ "asm_continuation:;"
-+ "movl %%ebx, %%eax;" /* shared_data */
-+ "movl 4(%%esp), %%edx;" /* status */
-+ "movl 8(%%esp), %%ecx;" /* hob_list */
-+ "jmp fsp_continue;"
-+ : : "m"(params_ptr), "a"(init), "b"(&shared_data)
-+ );
-+
-+ /*
-+ * Should never get here.
-+ * Control will continue from fsp_continue.
-+ * This line below is to prevent the compiler from optimizing
-+ * structure intialization.
-+ *
-+ * DO NOT REMOVE!
-+ */
-+ init(¶ms);
-+}
-+
-+u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase)
-+{
-+ fsp_notify_f notify;
-+ struct fsp_notify_params params;
-+ struct fsp_notify_params *params_ptr;
-+ u32 status;
-+
-+ if (!fsp_hdr)
-+ fsp_hdr = (struct fsp_header *)find_fsp_header();
-+
-+ if (fsp_hdr == NULL) {
-+ /* No valid FSP info header */
-+ panic("Invalid FSP header");
-+ }
-+
-+ notify = (fsp_notify_f)(fsp_hdr->img_base + fsp_hdr->fsp_notify);
-+ params.phase = phase;
-+ params_ptr = ¶ms;
-+
-+ /*
-+ * Use ASM code to ensure correct parameter is on the stack for
-+ * FspNotify as U-Boot is using different ABI from FSP
-+ */
-+ asm volatile (
-+ "pushl %1;" /* push notify phase */
-+ "call *%%eax;" /* call FspNotify */
-+ "addl $4, %%esp;" /* clean up the stack */
-+ : "=a"(status) : "m"(params_ptr), "a"(notify), "m"(*params_ptr)
-+ );
-+
-+ return status;
-+}
-+
-+u32 fsp_get_usable_lowmem_top(const void *hob_list)
-+{
-+ union hob_pointers hob;
-+ phys_addr_t phys_start;
-+ u32 top;
-+
-+ /* Get the HOB list for processing */
-+ hob.raw = (void *)hob_list;
-+
-+ /* * Collect memory ranges */
-+ top = FSP_LOWMEM_BASE;
-+ while (!end_of_hob(hob)) {
-+ if (get_hob_type(hob) == HOB_TYPE_RES_DESC) {
-+ if (hob.res_desc->type == RES_SYS_MEM) {
-+ phys_start = hob.res_desc->phys_start;
-+ /* Need memory above 1MB to be collected here */
-+ if (phys_start >= FSP_LOWMEM_BASE &&
-+ phys_start < (phys_addr_t)FSP_HIGHMEM_BASE)
-+ top += (u32)(hob.res_desc->len);
-+ }
-+ }
-+ hob.raw = get_next_hob(hob);
-+ }
-+
-+ return top;
-+}
-+
-+u64 fsp_get_usable_highmem_top(const void *hob_list)
-+{
-+ union hob_pointers hob;
-+ phys_addr_t phys_start;
-+ u64 top;
-+
-+ /* Get the HOB list for processing */
-+ hob.raw = (void *)hob_list;
-+
-+ /* Collect memory ranges */
-+ top = FSP_HIGHMEM_BASE;
-+ while (!end_of_hob(hob)) {
-+ if (get_hob_type(hob) == HOB_TYPE_RES_DESC) {
-+ if (hob.res_desc->type == RES_SYS_MEM) {
-+ phys_start = hob.res_desc->phys_start;
-+ /* Need memory above 1MB to be collected here */
-+ if (phys_start >= (phys_addr_t)FSP_HIGHMEM_BASE)
-+ top += (u32)(hob.res_desc->len);
-+ }
-+ }
-+ hob.raw = get_next_hob(hob);
-+ }
-+
-+ return top;
-+}
-+
-+u64 fsp_get_reserved_mem_from_guid(const void *hob_list, u64 *len,
-+ struct efi_guid *guid)
-+{
-+ union hob_pointers hob;
-+
-+ /* Get the HOB list for processing */
-+ hob.raw = (void *)hob_list;
-+
-+ /* Collect memory ranges */
-+ while (!end_of_hob(hob)) {
-+ if (get_hob_type(hob) == HOB_TYPE_RES_DESC) {
-+ if (hob.res_desc->type == RES_MEM_RESERVED) {
-+ if (compare_guid(&hob.res_desc->owner, guid)) {
-+ if (len)
-+ *len = (u32)(hob.res_desc->len);
-+
-+ return (u64)(hob.res_desc->phys_start);
-+ }
-+ }
-+ }
-+ hob.raw = get_next_hob(hob);
-+ }
-+
-+ return 0;
-+}
-+
-+u32 fsp_get_fsp_reserved_mem(const void *hob_list, u32 *len)
-+{
-+ const struct efi_guid guid = FSP_HOB_RESOURCE_OWNER_FSP_GUID;
-+ u64 length;
-+ u32 base;
-+
-+ base = (u32)fsp_get_reserved_mem_from_guid(hob_list,
-+ &length, (struct efi_guid *)&guid);
-+ if ((len != 0) && (base != 0))
-+ *len = (u32)length;
-+
-+ return base;
-+}
-+
-+u32 fsp_get_tseg_reserved_mem(const void *hob_list, u32 *len)
-+{
-+ const struct efi_guid guid = FSP_HOB_RESOURCE_OWNER_TSEG_GUID;
-+ u64 length;
-+ u32 base;
-+
-+ base = (u32)fsp_get_reserved_mem_from_guid(hob_list,
-+ &length, (struct efi_guid *)&guid);
-+ if ((len != 0) && (base != 0))
-+ *len = (u32)length;
-+
-+ return base;
-+}
-+
-+void *fsp_get_next_hob(u16 type, const void *hob_list)
-+{
-+ union hob_pointers hob;
-+
-+ assert(hob_list != NULL);
-+
-+ hob.raw = (u8 *)hob_list;
-+
-+ /* Parse the HOB list until end of list or matching type is found */
-+ while (!end_of_hob(hob)) {
-+ if (get_hob_type(hob) == type)
-+ return hob.raw;
-+
-+ hob.raw = get_next_hob(hob);
-+ }
-+
-+ return NULL;
-+}
-+
-+void *fsp_get_next_guid_hob(const struct efi_guid *guid, const void *hob_list)
-+{
-+ union hob_pointers hob;
-+
-+ hob.raw = (u8 *)hob_list;
-+ while ((hob.raw = fsp_get_next_hob(HOB_TYPE_GUID_EXT,
-+ hob.raw)) != NULL) {
-+ if (compare_guid(guid, &hob.guid->name))
-+ break;
-+ hob.raw = get_next_hob(hob);
-+ }
-+
-+ return hob.raw;
-+}
-+
-+void *fsp_get_guid_hob_data(const void *hob_list, u32 *len,
-+ struct efi_guid *guid)
-+{
-+ u8 *guid_hob;
-+
-+ guid_hob = fsp_get_next_guid_hob(guid, hob_list);
-+ if (guid_hob == NULL) {
-+ return NULL;
-+ } else {
-+ if (len)
-+ *len = get_guid_hob_data_size(guid_hob);
-+
-+ return get_guid_hob_data(guid_hob);
-+ }
-+}
-+
-+void *fsp_get_nvs_data(const void *hob_list, u32 *len)
-+{
-+ const struct efi_guid guid = FSP_NON_VOLATILE_STORAGE_HOB_GUID;
-+
-+ return fsp_get_guid_hob_data(hob_list, len, (struct efi_guid *)&guid);
-+}
-+
-+void *fsp_get_bootloader_tmp_mem(const void *hob_list, u32 *len)
-+{
-+ const struct efi_guid guid = FSP_BOOTLOADER_TEMP_MEM_HOB_GUID;
-+
-+ return fsp_get_guid_hob_data(hob_list, len, (struct efi_guid *)&guid);
-+}
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Kconfig u-boot/arch/x86/cpu/queensbay/Kconfig
---- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/cpu/queensbay/Kconfig 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,79 @@
-+#
-+# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+config INTEL_QUEENSBAY
-+ bool
-+ select HAVE_FSP
-+ select HAVE_CMC
-+
-+if INTEL_QUEENSBAY
-+
-+config HAVE_FSP
-+ bool "Add an Firmware Support Package binary"
-+ help
-+ Select this option to add an Firmware Support Package binary to
-+ the resulting U-Boot image. It is a binary blob which U-Boot uses
-+ to set up SDRAM and other chipset specific initialization.
-+
-+ Note: Without this binary U-Boot will not be able to set up its
-+ SDRAM so will not boot.
-+
-+config FSP_FILE
-+ string "Firmware Support Package binary filename"
-+ depends on HAVE_FSP
-+ default "fsp.bin"
-+ help
-+ The filename of the file to use as Firmware Support Package binary
-+ in the board directory.
-+
-+config FSP_ADDR
-+ hex "Firmware Support Package binary location"
-+ depends on HAVE_FSP
-+ default 0xfffc0000
-+ help
-+ FSP is not Position Independent Code (PIC) and the whole FSP has to
-+ be rebased if it is placed at a location which is different from the
-+ perferred base address specified during the FSP build. Use Intel's
-+ Binary Configuration Tool (BCT) to do the rebase.
-+
-+ The default base address of 0xfffc0000 indicates that the binary must
-+ be located at offset 0xc0000 from the beginning of a 1MB flash device.
-+
-+config FSP_TEMP_RAM_ADDR
-+ hex
-+ default 0x2000000
-+ help
-+ Stack top address which is used in FspInit after DRAM is ready and
-+ CAR is disabled.
-+
-+config HAVE_CMC
-+ bool "Add a Chipset Micro Code state machine binary"
-+ help
-+ Select this option to add a Chipset Micro Code state machine binary
-+ to the resulting U-Boot image. It is a 64K data block of machine
-+ specific code which must be put in the flash for the processor to
-+ access when powered up before system BIOS is executed.
-+
-+config CMC_FILE
-+ string "Chipset Micro Code state machine filename"
-+ depends on HAVE_CMC
-+ default "cmc.bin"
-+ help
-+ The filename of the file to use as Chipset Micro Code state machine
-+ binary in the board directory.
-+
-+config CMC_ADDR
-+ hex "Chipset Micro Code state machine binary location"
-+ depends on HAVE_CMC
-+ default 0xfffb0000
-+ help
-+ The location of the CMC binary is determined by a strap. It must be
-+ put in flash at a location matching the strap-determined base address.
-+
-+ The default base address of 0xfffb0000 indicates that the binary must
-+ be located at offset 0xb0000 from the beginning of a 1MB flash device.
-+
-+endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Makefile u-boot/arch/x86/cpu/queensbay/Makefile
---- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/cpu/queensbay/Makefile 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,9 @@
-+#
-+# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+obj-y += tnc_car.o tnc_dram.o tnc.o topcliff.o
-+obj-y += fsp_configs.o fsp_support.o
-+obj-$(CONFIG_PCI) += tnc_pci.o
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc.c u-boot/arch/x86/cpu/queensbay/tnc.c
---- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/cpu/queensbay/tnc.c 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,72 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/pci.h>
-+#include <asm/post.h>
-+#include <asm/arch/tnc.h>
-+#include <asm/arch/fsp/fsp_support.h>
-+#include <asm/processor.h>
-+
-+static void unprotect_spi_flash(void)
-+{
-+ u32 bc;
-+
-+ bc = pci_read_config32(PCH_LPC_DEV, 0xd8);
-+ bc |= 0x1; /* unprotect the flash */
-+ pci_write_config32(PCH_LPC_DEV, 0xd8, bc);
-+}
-+
-+int arch_cpu_init(void)
-+{
-+ struct pci_controller *hose;
-+ int ret;
-+
-+ post_code(POST_CPU_INIT);
-+#ifdef CONFIG_SYS_X86_TSC_TIMER
-+ timer_set_base(rdtsc());
-+#endif
-+
-+ ret = x86_cpu_init_f();
-+ if (ret)
-+ return ret;
-+
-+ ret = pci_early_init_hose(&hose);
-+ if (ret)
-+ return ret;
-+
-+ unprotect_spi_flash();
-+
-+ return 0;
-+}
-+
-+int print_cpuinfo(void)
-+{
-+ post_code(POST_CPU_INFO);
-+ return default_print_cpuinfo();
-+}
-+
-+void reset_cpu(ulong addr)
-+{
-+ /* cold reset */
-+ outb(0x06, PORT_RESET);
-+}
-+
-+void board_final_cleanup(void)
-+{
-+ u32 status;
-+
-+ /* call into FspNotify */
-+ debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
-+ status = fsp_notify(NULL, INIT_PHASE_BOOT);
-+ if (status != FSP_SUCCESS)
-+ debug("fail, error code %x\n", status);
-+ else
-+ debug("OK\n");
-+
-+ return;
-+}
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_car.S u-boot/arch/x86/cpu/queensbay/tnc_car.S
---- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_car.S 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/cpu/queensbay/tnc_car.S 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,124 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <config.h>
-+#include <asm/post.h>
-+
-+.globl car_init
-+car_init:
-+ /*
-+ * Note: ebp holds the BIST value (built-in self test) so far, but ebp
-+ * will be destroyed through the FSP call, thus we have to test the
-+ * BIST value here before we call into FSP.
-+ */
-+ test %ebp, %ebp
-+ jz car_init_start
-+ post_code(POST_BIST_FAILURE)
-+ jmp die
-+
-+car_init_start:
-+ post_code(POST_CAR_START)
-+ lea find_fsp_header_romstack, %esp
-+ jmp find_fsp_header
-+
-+find_fsp_header_ret:
-+ /* EAX points to FSP_INFO_HEADER */
-+ mov %eax, %ebp
-+
-+ /* sanity test */
-+ cmp $CONFIG_FSP_ADDR, %eax
-+ jb die
-+
-+ /* calculate TempRamInitEntry address */
-+ mov 0x30(%ebp), %eax
-+ add 0x1c(%ebp), %eax
-+
-+ /* call FSP TempRamInitEntry to setup temporary stack */
-+ lea temp_ram_init_romstack, %esp
-+ jmp *%eax
-+
-+temp_ram_init_ret:
-+ addl $4, %esp
-+ cmp $0, %eax
-+ jnz car_init_fail
-+
-+ post_code(POST_CAR_CPU_CACHE)
-+
-+ /*
-+ * The FSP TempRamInit initializes the ecx and edx registers to
-+ * point to a temporary but writable memory range (Cache-As-RAM).
-+ * ecx: the start of this temporary memory range,
-+ * edx: the end of this range.
-+ */
-+
-+ /* stack grows down from top of CAR */
-+ movl %edx, %esp
-+
-+ /*
-+ * TODO:
-+ *
-+ * According to FSP architecture spec, the fsp_init() will not return
-+ * to its caller, instead it requires the bootloader to provide a
-+ * so-called continuation function to pass into the FSP as a parameter
-+ * of fsp_init, and fsp_init() will call that continuation function
-+ * directly.
-+ *
-+ * The call to fsp_init() may need to be moved out of the car_init()
-+ * to cpu_init_f() with the help of some inline assembly codes.
-+ * Note there is another issue that fsp_init() will setup another stack
-+ * using the fsp_init parameter stack_top after DRAM is initialized,
-+ * which means any data on the previous stack (on the CAR) gets lost
-+ * (ie: U-Boot global_data). FSP is supposed to support such scenario,
-+ * however it does not work. This should be revisited in the future.
-+ */
-+ movl $CONFIG_FSP_TEMP_RAM_ADDR, %eax
-+ xorl %edx, %edx
-+ xorl %ecx, %ecx
-+ call fsp_init
-+
-+.global fsp_init_done
-+fsp_init_done:
-+ /*
-+ * We come here from FspInit with eax pointing to the HOB list.
-+ * Save eax to esi temporarily.
-+ */
-+ movl %eax, %esi
-+ /*
-+ * Re-initialize the ebp (BIST) to zero, as we already reach here
-+ * which means we passed BIST testing before.
-+ */
-+ xorl %ebp, %ebp
-+ jmp car_init_ret
-+
-+car_init_fail:
-+ post_code(POST_CAR_FAILURE)
-+
-+die:
-+ hlt
-+ jmp die
-+ hlt
-+
-+ /*
-+ * The function call before CAR initialization is tricky. It cannot
-+ * be called using the 'call' instruction but only the 'jmp' with
-+ * the help of a handcrafted stack in the ROM. The stack needs to
-+ * contain the function return address as well as the parameters.
-+ */
-+ .balign 4
-+find_fsp_header_romstack:
-+ .long find_fsp_header_ret
-+
-+ .balign 4
-+temp_ram_init_romstack:
-+ .long temp_ram_init_ret
-+ .long temp_ram_init_params
-+temp_ram_init_params:
-+_dt_ucode_base_size:
-+ /* These next two fields are filled in by ifdtool */
-+ .long 0 /* microcode base */
-+ .long 0 /* microcode size */
-+ .long CONFIG_SYS_MONITOR_BASE /* code region base */
-+ .long CONFIG_SYS_MONITOR_LEN /* code region size */
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_dram.c u-boot/arch/x86/cpu/queensbay/tnc_dram.c
---- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_dram.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/cpu/queensbay/tnc_dram.c 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/fsp/fsp_support.h>
-+#include <asm/e820.h>
-+#include <asm/post.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+int dram_init(void)
-+{
-+ phys_size_t ram_size = 0;
-+ union hob_pointers hob;
-+
-+ hob.raw = gd->arch.hob_list;
-+ while (!end_of_hob(hob)) {
-+ if (get_hob_type(hob) == HOB_TYPE_RES_DESC) {
-+ if (hob.res_desc->type == RES_SYS_MEM ||
-+ hob.res_desc->type == RES_MEM_RESERVED) {
-+ ram_size += hob.res_desc->len;
-+ }
-+ }
-+ hob.raw = get_next_hob(hob);
-+ }
-+
-+ gd->ram_size = ram_size;
-+ post_code(POST_DRAM);
-+
-+ return 0;
-+}
-+
-+void dram_init_banksize(void)
-+{
-+ gd->bd->bi_dram[0].start = 0;
-+ gd->bd->bi_dram[0].size = gd->ram_size;
-+}
-+
-+/*
-+ * This function looks for the highest region of memory lower than 4GB which
-+ * has enough space for U-Boot where U-Boot is aligned on a page boundary.
-+ * It overrides the default implementation found elsewhere which simply
-+ * picks the end of ram, wherever that may be. The location of the stack,
-+ * the relocation address, and how far U-Boot is moved by relocation are
-+ * set in the global data structure.
-+ */
-+ulong board_get_usable_ram_top(ulong total_size)
-+{
-+ return fsp_get_usable_lowmem_top(gd->arch.hob_list);
-+}
-+
-+unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
-+{
-+ unsigned num_entries = 0;
-+
-+ union hob_pointers hob;
-+
-+ hob.raw = gd->arch.hob_list;
-+
-+ while (!end_of_hob(hob)) {
-+ if (get_hob_type(hob) == HOB_TYPE_RES_DESC) {
-+ entries[num_entries].addr = hob.res_desc->phys_start;
-+ entries[num_entries].size = hob.res_desc->len;
-+
-+ if (hob.res_desc->type == RES_SYS_MEM)
-+ entries[num_entries].type = E820_RAM;
-+ else if (hob.res_desc->type == RES_MEM_RESERVED)
-+ entries[num_entries].type = E820_RESERVED;
-+ }
-+ hob.raw = get_next_hob(hob);
-+ num_entries++;
-+ }
-+
-+ return num_entries;
-+}
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_pci.c u-boot/arch/x86/cpu/queensbay/tnc_pci.c
---- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_pci.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/cpu/queensbay/tnc_pci.c 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,61 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <pci.h>
-+#include <asm/pci.h>
-+#include <asm/arch/fsp/fsp_support.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+void board_pci_setup_hose(struct pci_controller *hose)
-+{
-+ hose->first_busno = 0;
-+ hose->last_busno = 0;
-+
-+ /* PCI memory space */
-+ pci_set_region(hose->regions + 0,
-+ CONFIG_PCI_MEM_BUS,
-+ CONFIG_PCI_MEM_PHYS,
-+ CONFIG_PCI_MEM_SIZE,
-+ PCI_REGION_MEM);
-+
-+ /* PCI IO space */
-+ pci_set_region(hose->regions + 1,
-+ CONFIG_PCI_IO_BUS,
-+ CONFIG_PCI_IO_PHYS,
-+ CONFIG_PCI_IO_SIZE,
-+ PCI_REGION_IO);
-+
-+ pci_set_region(hose->regions + 2,
-+ CONFIG_PCI_PREF_BUS,
-+ CONFIG_PCI_PREF_PHYS,
-+ CONFIG_PCI_PREF_SIZE,
-+ PCI_REGION_PREFETCH);
-+
-+ pci_set_region(hose->regions + 3,
-+ 0,
-+ 0,
-+ gd->ram_size,
-+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-+
-+ hose->region_count = 4;
-+}
-+
-+int board_pci_post_scan(struct pci_controller *hose)
-+{
-+ u32 status;
-+
-+ /* call into FspNotify */
-+ debug("Calling into FSP (notify phase INIT_PHASE_PCI): ");
-+ status = fsp_notify(NULL, INIT_PHASE_PCI);
-+ if (status != FSP_SUCCESS)
-+ debug("fail, error code %x\n", status);
-+ else
-+ debug("OK\n");
-+
-+ return 0;
-+}
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/topcliff.c u-boot/arch/x86/cpu/queensbay/topcliff.c
---- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/topcliff.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/cpu/queensbay/topcliff.c 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,47 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <errno.h>
-+#include <malloc.h>
-+#include <pci.h>
-+#include <pci_ids.h>
-+#include <sdhci.h>
-+
-+static struct pci_device_id mmc_supported[] = {
-+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_0 },
-+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_1 },
-+ { }
-+};
-+
-+int cpu_mmc_init(bd_t *bis)
-+{
-+ struct sdhci_host *mmc_host;
-+ pci_dev_t devbusfn;
-+ u32 iobase;
-+ int ret;
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(mmc_supported); i++) {
-+ devbusfn = pci_find_devices(mmc_supported, i);
-+ if (devbusfn == -1)
-+ return -ENODEV;
-+
-+ mmc_host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
-+ if (!mmc_host)
-+ return -ENOMEM;
-+
-+ mmc_host->name = "Topcliff SDHCI";
-+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &iobase);
-+ mmc_host->ioaddr = (void *)iobase;
-+ mmc_host->quirks = 0;
-+ ret = add_sdhci(mmc_host, 0, 0);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/start.S u-boot/arch/x86/cpu/start.S
---- u-boot-2015.01-rc3/arch/x86/cpu/start.S 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/cpu/start.S 2015-01-01 17:34:32.253503252 +0100
-@@ -1,5 +1,5 @@
- /*
-- * U-boot - x86 Startup Code
-+ * U-Boot - x86 Startup Code
- *
- * (C) Copyright 2008-2011
- * Graeme Russ, <graeme.russ@gmail.com>
-@@ -17,6 +17,7 @@
- #include <asm/processor.h>
- #include <asm/processor-flags.h>
- #include <generated/generic-asm-offsets.h>
-+#include <generated/asm-offsets.h>
-
- .section .text
- .code32
-@@ -74,6 +75,7 @@
- jmp car_init
- .globl car_init_ret
- car_init_ret:
-+#ifndef CONFIG_HAVE_FSP
- /*
- * We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
- * or fully initialised SDRAM - we really don't care which)
-@@ -94,6 +96,12 @@
- #ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
- subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
- #endif
-+#else
-+ /*
-+ * When we get here after car_init, esp points to a temporary stack
-+ * and esi holds the HOB list address returned by the FSP.
-+ */
-+#endif
-
- /* Reserve space on stack for global data */
- subl $GENERATED_GBL_DATA_SIZE, %esp
-@@ -108,6 +116,13 @@
- movl %esp, %edi
- rep stosb
-
-+#ifdef CONFIG_HAVE_FSP
-+ /* Store HOB list */
-+ movl %esp, %edx
-+ addl $GD_HOB_LIST, %edx
-+ movl %esi, (%edx)
-+#endif
-+
- /* Setup first parameter to setup_gdt, pointer to global_data */
- movl %esp, %eax
-
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/chromebook_link.dts u-boot/arch/x86/dts/chromebook_link.dts
---- u-boot-2015.01-rc3/arch/x86/dts/chromebook_link.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/dts/chromebook_link.dts 2015-01-01 17:34:32.253503252 +0100
-@@ -214,10 +214,10 @@
-
- microcode {
- update@0 {
--#include "m12206a7_00000028.dtsi"
-+#include "microcode/m12206a7_00000029.dtsi"
- };
- update@1 {
--#include "m12306a9_00000017.dtsi"
-+#include "microcode/m12306a9_0000001b.dtsi"
- };
- };
-
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/coreboot.dtsi u-boot/arch/x86/dts/coreboot.dtsi
---- u-boot-2015.01-rc3/arch/x86/dts/coreboot.dtsi 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/dts/coreboot.dtsi 2015-01-01 17:34:32.253503252 +0100
-@@ -6,7 +6,7 @@
- };
-
- serial {
-- compatible = "coreboot-uart";
-+ compatible = "x86-uart";
- reg = <0x3f8 0x10>;
- reg-shift = <0>;
- io-mapped = <1>;
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/crownbay.dts u-boot/arch/x86/dts/crownbay.dts
---- u-boot-2015.01-rc3/arch/x86/dts/crownbay.dts 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/dts/crownbay.dts 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,60 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+/dts-v1/;
-+
-+/include/ "coreboot.dtsi"
-+
-+/ {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ model = "Intel Crown Bay";
-+ compatible = "intel,crownbay", "intel,queensbay";
-+
-+ config {
-+ silent_console = <0>;
-+ };
-+
-+ gpioa {
-+ compatible = "intel,ich6-gpio";
-+ u-boot,dm-pre-reloc;
-+ reg = <0 0x20>;
-+ bank-name = "A";
-+ };
-+
-+ gpiob {
-+ compatible = "intel,ich6-gpio";
-+ u-boot,dm-pre-reloc;
-+ reg = <0x20 0x20>;
-+ bank-name = "B";
-+ };
-+
-+ serial {
-+ reg = <0x3f8 8>;
-+ clock-frequency = <115200>;
-+ };
-+
-+ chosen { };
-+ memory { device_type = "memory"; reg = <0 0>; };
-+
-+ spi {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "intel,ich7";
-+ spi-flash@0 {
-+ reg = <0>;
-+ compatible = "sst,25vf016b", "spi-flash";
-+ memory-map = <0xffe00000 0x00200000>;
-+ };
-+ };
-+
-+ microcode {
-+ update@0 {
-+#include "microcode/m0220661105_cv.dtsi"
-+ };
-+ };
-+
-+};
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/x86/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/x86/dts/include/dt-bindings/reset/altr,rst-mgr.h
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/link.dts u-boot/arch/x86/dts/link.dts
---- u-boot-2015.01-rc3/arch/x86/dts/link.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/dts/link.dts 2015-01-01 17:34:32.253503252 +0100
-@@ -214,10 +214,10 @@
-
- microcode {
- update@0 {
--#include "m12206a7_00000028.dtsi"
-+#include "microcode/m12206a7_00000029.dtsi"
- };
- update@1 {
--#include "m12306a9_00000017.dtsi"
-+#include "microcode/m12306a9_0000001b.dtsi"
- };
- };
-
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/m12206a7_00000028.dtsi u-boot/arch/x86/dts/m12206a7_00000028.dtsi
---- u-boot-2015.01-rc3/arch/x86/dts/m12206a7_00000028.dtsi 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/dts/m12206a7_00000028.dtsi 1970-01-01 01:00:00.000000000 +0100
-@@ -1,622 +0,0 @@
--/*
-- * Copyright (c) <1995-2013>, Intel Corporation.
-- * All rights reserved.
-- *
-- * Redistribution. Redistribution and use in binary form, without modification, are
-- * permitted provided that the following conditions are met:
-- * .Redistributions must reproduce the above copyright notice and the following
-- * disclaimer in the documentation and/or other materials provided with the
-- * distribution.
-- * Neither the name of Intel Corporation nor the names of its suppliers may be used
-- * to endorse or promote products derived from this software without specific prior
-- * written permission.
-- * .No reverse engineering, decompilation, or disassembly of this software is
-- * permitted.
-- * ."Binary form" includes any format commonly used for electronic conveyance
-- * which is a reversible, bit-exact translation of binary representation to ASCII or
-- * ISO text, for example, "uuencode."
-- *
-- * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
-- * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
-- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
-- * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-- *
-- *---
-- * This is a device tree fragment. Use #include to add these properties to a
-- * node.
-- */
--
--compatible = "intel,microcode";
--intel,header-version = <1>;
--intel,update-revision = <0x28>;
--intel,date-code = <0x04242012>;
--intel,processor-signature = <0x000206a7>;
--intel,checksum = <0xf3e9935d>;
--intel,loader-revision = <1>;
--intel,processor-flags = <0x12>;
--
--/* The 48-byte public header is omitted. */
--data = <
-- 0x00000000 0x000000a1 0x00020001 0x00000028
-- 0x00000000 0x00000000 0x20120423 0x000008f1
-- 0x00000001 0x000206a7 0x00000000 0x00000000
-- 0x00000000 0x00000000 0x00000000 0x00000000
-- 0x00000000 0x000008f1 0x00000000 0x00000000
-- 0x00000000 0x00000000 0x00000000 0x00000000
-- 0x52b813ac 0xdb8994c7 0x70e9f6bb 0x9d6db2ff
-- 0xf4d70f5d 0x5b1eccf6 0xac59106f 0x0ae2e2c1
-- 0x1a7bbeb1 0x355a1d62 0x2e7eb594 0x09f8dea9
-- 0x432a49e4 0xbf520253 0xdafa4010 0x893a858a
-- 0x766e0efb 0xd91e196d 0x838bd2ef 0xe5146494
-- 0xd515f413 0x29704828 0xe85598b6 0xdcbe6c51
-- 0x88eabbfa 0xa1e8909f 0xd8931721 0x35386554
-- 0x089a78a7 0xd9914775 0xd4644748 0x1556a4dc
-- 0xf44448f6 0xd054d7db 0xf30f2b7d 0x5ae223d0
-- 0xcbbb48b0 0x5c8b0383 0x177de157 0x9c1e5f73
-- 0x2ec28289 0xd72a7b6c 0x823b6eb2 0x35e02171
-- 0xba8deae4 0x06f4d468 0x13dbafaa 0x72b419f1
-- 0x033385b5 0x05806920 0x4c6034cf 0x9bd117dc
-- 0x976e2d04 0x250330f0 0x7250b5e1 0x184980c2
-- 0x12a9d7d6 0x1bc808f9 0xae79994f 0xc6f87901
-- 0xc0e3132f 0x671491c5 0x236cad39 0x37889d9c
-- 0x67f7c3f3 0x964a6be5 0xbcced7da 0x57eeaa6e
-- 0x7bca1522 0x654fee4c 0x2a1ca5d9 0xa1803cf3
-- 0x00000011 0x8c316d2c 0x17603b7e 0x32e42981
-- 0xc26c1400 0xf0fbccb6 0xeab6b43a 0x11d456a5
-- 0x5b912d46 0x15195fe0 0x542f6db3 0x0b7f212e
-- 0x47718dd9 0x7c41b108 0x06c21111 0x4445d5ea
-- 0xb4fb8128 0xe07404a6 0x8d503da4 0x78fc7e44
-- 0xb9919656 0x9968c797 0x87f26ab0 0x23bb1af7
-- 0x1ec5d761 0x26f30d2c 0x7cdb747c 0xe4d42033
-- 0x8a5d4801 0x768aff57 0xbcfd5d11 0x7c853c2d
-- 0x231e6207 0x8b1988a6 0xd68fdb75 0x58dcb417
-- 0x44422ef9 0x2a186ebb 0x7d27e85f 0x36ac31f7
-- 0x1e487e77 0x2b0b8c37 0xd8ba682f 0x2cba791b
-- 0xe6d3dece 0x1b2c2a99 0x4e5decab 0xfbd313a3
-- 0xdbc78294 0x5a80cce7 0x2d8e0f0b 0xcf564f71
-- 0x073d1f37 0x25162870 0x96cdb85b 0x9c553048
-- 0x24eba740 0xfc0f352e 0x0c83be68 0x89b5076c
-- 0xc39c4355 0x6a4cf25c 0x2bbd2682 0xc524fdb9
-- 0x7ea19bae 0x191ad6f1 0xd3fbf3bf 0x21bf77fa
-- 0x8f77fec4 0x0f90f635 0xe55e165c 0x868d58c0
-- 0x966bc0ad 0x6c276364 0x9d8f7eff 0x4b7925d4
-- 0x8b2f9326 0x4ab7b47e 0x33a9087c 0xf31ab949
-- 0x69831dfb 0x4711a215 0x8128c1fa 0x8481c213
-- 0x7401b01b 0xfdcfdc50 0xd6b55266 0xae9b23ac
-- 0xfa2ad275 0xa225bb45 0x4dd720c4 0x760a20e6
-- 0x5f1223c9 0x2f334372 0x6e1dcdab 0xe8ee8638
-- 0x1c19ba8a 0xef9341c4 0x360aaa9d 0x90452ea9
-- 0x65852446 0xe9398fa3 0xbba6a631 0x1a3e90b9
-- 0xe2a73a56 0x6e8c0747 0x35c7c53d 0xcc1ac842
-- 0x183356af 0xb6e98608 0x987b43c2 0xa8a3cfd2
-- 0xc2c5fce0 0xcc3af64a 0xd6d3a291 0xe59ad1f5
-- 0x124ca513 0x9522b50a 0x25150477 0xa2eb5797
-- 0x7fc63626 0x648c48e3 0x9f5797ff 0x2307b84d
-- 0x980625a4 0xabc05983 0x24980807 0x773c4f99
-- 0x3407b872 0x07c3657a 0xa2cd9e48 0x49c1e6a8
-- 0xa881b84c 0xf804d72c 0xb5319d2a 0x3e39780f
-- 0x97518822 0x0acd54c2 0x0721a9ff 0x10e1d2fd
-- 0xa7b6db77 0x845b1a56 0xef00160e 0x6b41bfd5
-- 0xc994df0d 0xcf44a5ca 0x794b36a4 0xf9fdb127
-- 0x922a1366 0x822aa8a9 0x4b137bd5 0x5722a49f
-- 0x8933719a 0x17edc1a9 0x079d9538 0x21fae7d5
-- 0xe534fd73 0x9d3038d5 0x48c3a056 0x5b22d58a
-- 0x6f142866 0xf1d767cd 0xb51ad5a6 0x34a0ef85
-- 0x0111703e 0xca4b3a30 0xa0f3c34d 0x9d48775a
-- 0x3f2059f9 0xf2fe2c36 0x588861a9 0xed5bd9fe
-- 0x8231f7cb 0x8c115969 0x3f82ba00 0x21b3730c
-- 0xba757997 0x3ec0bb2c 0x16f11def 0x5d4356c6
-- 0xdc2e0bc2 0x58c1eb6e 0x313ede0c 0xb68fcc52
-- 0x84d3e1b5 0xcc6d9201 0x95046196 0x276b527b
-- 0x80a4a729 0xe782916d 0x5cf09e0b 0x98aaf9fa
-- 0x1de6dd43 0xab4f1962 0x49ece734 0x81455488
-- 0xc2597b61 0x5b22af85 0x646f7b94 0x09213a1f
-- 0x08edf7e4 0x963d343c 0x059ba888 0xb4e804ed
-- 0xe7cc826c 0xf87bafc7 0xeecaec10 0x8e60919c
-- 0xbf14c996 0xd3dcaee3 0xb8fa0b7e 0x81563c6e
-- 0x7f59a258 0x2f344446 0x374d8aa6 0x9b6de5c9
-- 0xbf992857 0xbc5b94fc 0x28adb080 0x17e41044
-- 0xb87b469e 0xda504d12 0xf21bef8b 0xce75c1e3
-- 0xdbd92c83 0x58bba0af 0x77b42977 0x506cfd75
-- 0x1139e875 0x6ce5fe43 0xc6a5d7b3 0x87f9e628
-- 0x7b5c500b 0x130066b3 0x789b611f 0xec8c1ba9
-- 0xb7e6872d 0xaf828cd6 0xc28d3316 0x2a91f6d0
-- 0xc725f063 0x065ac531 0x4f9ef4b8 0x2b9d927e
-- 0xaf54f3f9 0x7c924f72 0xda1d77ad 0xff00db67
-- 0xaf4f03c0 0xb4f4ee64 0x169e64e5 0x04653ac0
-- 0xed51cb70 0xfeaff0e5 0x51dbf346 0x072a2407
-- 0x23fb74f4 0x9a906eef 0x5d6fc3f0 0xbc3c374c
-- 0x1cf9f063 0x919015d9 0x5b3e9d07 0xd6209d8b
-- 0xa3710b3d 0x90ad23b8 0x420ceedc 0x58e8371f
-- 0x5d419d1f 0xb8acd13f 0x7d100d6d 0x210c10d1
-- 0xcd0a697e 0x5023db4b 0x33e6d8e7 0x44bbe6b4
-- 0x827e859f 0x6ca4cc81 0x661bb2c3 0x71209ee8
-- 0xb8c3ffaf 0xd1075f51 0xba1eae10 0x728b0a6a
-- 0xe4af7a2f 0xca9bcf2e 0xb249a631 0xdce6be47
-- 0x5c910321 0x425c3c27 0x33083e43 0xdea067ae
-- 0xea594a23 0x41b75c2c 0x3a401a95 0xd33cd88a
-- 0xc295cad0 0x67f48045 0x1dc9ad4c 0x4bc48864
-- 0x53991b6e 0x7aadde5f 0x2b0bf775 0x06ba5380
-- 0x9eb874be 0x2c4b967a 0x1bcc342f 0xe875001b
-- 0x15b5642d 0x5be99c9d 0xcb210ace 0x1b4924ad
-- 0x3793ed81 0x8b983114 0x3ec33981 0x75ec71e7
-- 0x8b5b7df3 0x834756f4 0x100fad01 0x70037fdf
-- 0x0cef9a36 0x3d9e3a2d 0x38b48efd 0xfc4034b6
-- 0xa32e29dd 0x388944bc 0xc1c15614 0x3877e9c7
-- 0xa5e733fa 0xa621bd53 0x4b651df6 0xce082970
-- 0x85f30d6f 0x729a5c87 0x31dd7ba9 0xdb495828
-- 0x7b12c698 0x953495c9 0x6b5f99e7 0x2cc42fa8
-- 0x697ac512 0x1be679de 0xc116d305 0x94a36606
-- 0x9e5e141e 0x874affed 0x58d40b0b 0x5e3cf5e5
-- 0x5d05e9a9 0x06840efc 0xd2f98b21 0xa1e83ab2
-- 0x4f726202 0xa6394535 0x62a02403 0x9f2167ec
-- 0x4f9fc77b 0x98073be4 0x2bc781fa 0xfc8e4c89
-- 0xc7179b97 0x692cf793 0x708ff7bb 0x12ecba93
-- 0xacd06e21 0x202bef76 0x03852241 0xe84e02a1
-- 0xf1f9ac8d 0xcee61aef 0x61a4f235 0xd22991eb
-- 0x67a81345 0x375a15c6 0xe8fae8a3 0xb4ff2b37
-- 0x339ee4ea 0x14ffadc3 0xf49340dd 0xf285e568
-- 0x00fc6970 0x369c52d1 0x4f55368f 0x3f4d75f1
-- 0x6a73b603 0x963c1f59 0x171e2bdc 0x72bac76b
-- 0x9e2e5c32 0x307f7c3f 0xd3b48637 0x3a917acf
-- 0xea52a65f 0xecd209fb 0xf0ad84bf 0xd4bdea70
-- 0xa2647b38 0xce040b49 0xc6d5f13d 0x5d942c52
-- 0xf8edc042 0x798fdefd 0x4b074246 0x1cb1873a
-- 0x6793c186 0x23b9c774 0x77bb0202 0xc519b3aa
-- 0xa30c09a2 0xe1f6669a 0xb7eddb8d 0x7aaa91d6
-- 0x076a3789 0x0ac47791 0x1e503404 0x44fe8c54
-- 0xf3cbbf49 0xd3234eef 0x0d898b3f 0xe854984b
-- 0xe3986de9 0x923a5c76 0x2ee9abca 0x1a9fedbe
-- 0xdf76dcd1 0xea07936b 0xcdaaf247 0xe62d98fa
-- 0xa99c7f7b 0x34fc84d4 0x03a35111 0xad5675c8
-- 0xcc64075b 0x408203f9 0x846e1f08 0xe934019e
-- 0x423d1223 0x2f04f9e3 0xee1dbf40 0x65edc60f
-- 0x097aa22f 0x7058a2b7 0x41c8a0a5 0xa68aa391
-- 0x0f345c40 0x667517e6 0x860838ba 0x6dae933b
-- 0x764d5919 0x6673fa0f 0xf0a5e97d 0x4262ebbe
-- 0x64b413f2 0xd2c4145a 0x0b2c11f3 0xfdfe9f93
-- 0x96c77107 0x1399fdda 0xf599f215 0xb504da5d
-- 0xf8a95268 0x9ed1ef87 0x9ae33cfb 0x3b21f1ef
-- 0xc6d447c2 0xe0694d4e 0x967febab 0xc13f631d
-- 0x8393bfba 0x37438788 0x1724194d 0x8e77a045
-- 0x20e2483c 0xb961c2fc 0x485cf593 0xb3462621
-- 0xcb2959b8 0x10307e19 0xf71fbbfd 0xdda641e1
-- 0x0daf5f66 0x56d85178 0x145f6749 0xebc46ed1
-- 0x5593c249 0x94561f51 0x534cc654 0xca7c8814
-- 0xb59a578c 0x40b2b614 0xeaf3437a 0x198d5b4e
-- 0xf245fa53 0xfb75e0b0 0xa363c46d 0xc43b5468
-- 0xdf036413 0xc59f5a36 0xd8ff4381 0xa3af3e36
-- 0x7af63462 0x414526d7 0x7bdc41c5 0xa416f1e7
-- 0x6987d9ad 0x472c5499 0x4f10ee37 0x47bb7ff7
-- 0xc7f2e621 0x820008f7 0x33a475db 0x91ff5d72
-- 0x0517401c 0x73d067c8 0xe417b69d 0xb86d9903
-- 0x1ac9a032 0x74bbf582 0x8b65596e 0x883be34c
-- 0x95dcc26f 0xe232c646 0xfae9c19f 0x35cb5273
-- 0x6a94d095 0xfff6ca91 0xb9c40eb5 0xd351dcac
-- 0xc90d464f 0x9b609642 0x15663b56 0x15f7f88d
-- 0x22499f60 0x417fd6c5 0x2dc36fe2 0x712bf66a
-- 0x22f1fba8 0x531b8092 0x40d269b6 0x1d227898
-- 0xeb6ff35b 0x2490ac31 0xc958ed65 0x3ce6ffb7
-- 0x9338a806 0x3beadfe2 0x1c361ac9 0x53d0e3b0
-- 0x91d46102 0x4d57045f 0xb5c8afb3 0xfd2c9e7d
-- 0x3d578410 0x2adb9406 0x10df7459 0x90abccfb
-- 0xe3f217ed 0xef5f4e09 0x74925ce4 0x169b5879
-- 0xfeff4ad5 0xb300dd1d 0xc96022ba 0x72da501b
-- 0x1e694296 0x9efa33cb 0x0dc3ee6c 0x0ac4e7ea
-- 0x73041130 0xf0e6a295 0xc46bdb6a 0x6a927044
-- 0xd217ceca 0x0b744007 0xd5a2bafb 0x4220cd92
-- 0x70d3352a 0x5ee4f661 0xfa07e5c0 0x155542d9
-- 0x4a39fba0 0xcec0552d 0x30c1d8ef 0xbef9d21e
-- 0x183879aa 0x5b3f30a8 0x54a06db4 0xef876e4e
-- 0x5e823680 0x53e2a353 0xc9aa4112 0x13a56ee5
-- 0x848859fd 0x0ba2b801 0xec15260f 0x7bb22672
-- 0x1a097332 0xb141339f 0x752a67d9 0xdae373f3
-- 0x3c8cfd49 0x2dfaf2a9 0x95820c6c 0x956b39a2
-- 0x1ca0d24e 0x1312b978 0x7280e1bd 0xa7a7c2ff
-- 0x0b48e987 0xb6083e55 0x4b4b82f4 0x9c6104ad
-- 0xcb93beca 0xe1c34035 0x34de740d 0xbb151baa
-- 0x71f5942f 0x1eaac228 0x0c68331b 0x3d2a1dd0
-- 0xe7a3d41a 0x7253acae 0xfd4de230 0x79988d80
-- 0x4468f19b 0xac4440fd 0x6e8a6ef3 0x5736adf8
-- 0xded67716 0x1f1d5a4b 0x96c5f451 0x85bae181
-- 0x1293ab28 0xc2ba53c2 0x729ff4cf 0x60218df8
-- 0xc2870138 0x6127d844 0x89604e9e 0xd2b9ad4e
-- 0x4f6ded9f 0xdd263849 0x1633bd92 0x64b03a24
-- 0x96dabd4d 0x6e85d235 0x1ab69ad0 0x9aa80454
-- 0x6b9041e0 0x106c7e9a 0x8f54812f 0xa274efe4
-- 0xe45d6695 0xf3aa7bd3 0x6a5a2a63 0xe36f3525
-- 0x6238fa4b 0x7d6cb06f 0x16d3b4a2 0xf3b04822
-- 0x638f1a60 0x0e1875fa 0x1c0292b9 0x6b519ea4
-- 0x9faba37b 0x209341ec 0x83c9061f 0x3387dfe8
-- 0xc7f12ceb 0x2bef45d7 0x8f8acb47 0x35d9741b
-- 0x7009f514 0xfd003802 0x6f9489c5 0xe2ea2504
-- 0x910e996a 0xcc81d016 0x3280730d 0xdedfef59
-- 0x5a7357cc 0x8fe8dd39 0x15543fe5 0x976c4207
-- 0xe41cf62b 0x0ba6b4b5 0x5c3b7ced 0xa6c5b72b
-- 0x72ad3b4d 0xff143181 0x2b78a157 0x7fe231a5
-- 0x6ff0538a 0xe58ed1ac 0x81a311a5 0xefaa54b8
-- 0xf04a797e 0xce6e69c7 0xdc810726 0x7bab7be3
-- 0xdd5923e8 0x5a2413ed 0x31cef794 0x73dfd806
-- 0x1b9223c1 0x0c370882 0x04fa3b68 0x87c50bc1
-- 0x1d78c90f 0xf4e2cee6 0xebea941b 0x73e5838f
-- 0xca8d39a6 0xe004296b 0x28cf8a0e 0x7c73e7ef
-- 0x26a296c2 0x789d4c72 0xd1490265 0xd9a9e843
-- 0xf03504c3 0xfae6dffb 0x7a48f00d 0x51e369c8
-- 0xcb3eeee6 0x0625e936 0xe93d0d7d 0xfb15ba6b
-- 0xec5c76da 0x8fdf44f1 0xa036653a 0x5730c4a3
-- 0xe5bfe6dd 0x0b8c091f 0x3b51558c 0x403748f4
-- 0xf4007f86 0x952b5db6 0x5524d8ba 0x8046409a
-- 0xe3fc61a9 0x66f4ea56 0x5645150b 0xdb2bec15
-- 0x50672218 0x7f40e87d 0x2b8359f8 0x438787dc
-- 0x7f221597 0xf8b1590c 0x4f468251 0xff586d05
-- 0xb9195380 0x0ee09e0b 0x2fa7dbd9 0xd197b327
-- 0xa0dbad58 0xb485681f 0x5ef0937c 0x1e07ebb6
-- 0xcb49fe3f 0xc2427cd9 0x6c2c5298 0x4a2e171a
-- 0xa7f333a8 0xb3609ad6 0x94e374d6 0x0e1eb64d
-- 0x22c3367d 0xcdf89975 0x647aceef 0x16727c9c
-- 0xf476ae53 0x35a1212e 0x0db768b8 0xfff8b53d
-- 0xbd4fe45e 0xab28a5a3 0x59cec0af 0x28bcd1ef
-- 0x6f43ad69 0x2658a059 0x27aee0ec 0x4e8bbd15
-- 0xa9fdcf04 0xc9aa329f 0x687f010f 0x5c968a07
-- 0xb894e607 0x0e1cba22 0x2f00f203 0xe8e133ac
-- 0x494a4746 0xe8bdff9a 0xf69791a2 0x64179ce2
-- 0xbfd10dc6 0xc026f6d8 0x4871923a 0x8946b277
-- 0x609f49a4 0x6466df1b 0xd8c3c131 0x46ef0291
-- 0x0fdce8b6 0x2b9aedb7 0x225c4520 0x72b332cf
-- 0x4e220d47 0xf2f69c36 0x2c23fad9 0x57a2a918
-- 0xe017409c 0x490819af 0xf2121afd 0x951ff7ff
-- 0x40363fcf 0x5078b94e 0x9e4be775 0xee97ef16
-- 0xdb3a2390 0x17d42af9 0x96f56a51 0x1b4c2934
-- 0xc866315c 0x2b746f99 0x9a3b73f6 0xa1e081fc
-- 0xa9d07ebd 0xa6359fae 0xdf50d099 0x55304e01
-- 0xfe5aaa81 0x1e74267d 0x38b1d2d7 0x8633e9af
-- 0x99b013df 0x3aa05831 0x86279736 0xd2b464e0
-- 0xdf036a9f 0xe8162915 0x876c0d4f 0x4beb7d0e
-- 0xfec9b170 0x46bc9df4 0x46cb88fa 0x0cb5904d
-- 0x2e2961cf 0x7ea5dc1a 0x60670df2 0xf935ca32
-- 0x67e6777b 0x8bacc97a 0x5cd07248 0x32e483e6
-- 0xfdf09b0d 0xca57150b 0x3f432d09 0xdea2d7db
-- 0x9f6a2954 0x6f07dff3 0x4133f394 0x60272f97
-- 0x1b98c9ec 0x2ab648d9 0xb5df14a8 0x0d2c38f2
-- 0x5dfde2c4 0x7cb43ca3 0x8d0c6c01 0xe80ea41e
-- 0x5f58b71e 0x4ca9fef2 0xabd201a4 0x50905c08
-- 0xca8ba387 0x5592922b 0xfa4e05f5 0xceb64b14
-- 0x0845c5bd 0x518d369b 0x727e570c 0x1daaab31
-- 0x801e8b9c 0xec6568f3 0xd4c3760f 0x40a78d22
-- 0x38af58b5 0xc406a76e 0x8c3a7779 0x18272c42
-- 0x45cf7b70 0xa6f3c0f3 0x88021e41 0xda662504
-- 0xe97aa709 0xe93bafe0 0x8862ed5f 0x35bc8268
-- 0xf5a41551 0x3dd3bb21 0x1af0cf11 0x08fe1ad7
-- 0x53ecae41 0x01a4a8ae 0xfed636b7 0xf09323e6
-- 0x73b9b253 0x7ebd7ce2 0x7074b4de 0x21c719b2
-- 0x50982743 0xd23cfd27 0x136a1f4a 0x23260f6e
-- 0xfad89dcd 0x57586681 0xadc4fba5 0xad0f71b8
-- 0x91a3f188 0x20d62385 0xfecda9cb 0x33d67776
-- 0x2abb0e6c 0x0ad16087 0x486332da 0x2928d342
-- 0xf6d1b174 0x5e133a4e 0x72fc0ad4 0x940578b8
-- 0x320a42b1 0x9cbda7d4 0xf2a36135 0x00ab8de3
-- 0x5bad9000 0x5778e633 0x3952763d 0xe0e58583
-- 0xdfb0bf19 0xb11914b6 0xa67da7a1 0x8d9a9f81
-- 0x638cbcf7 0x83bf931d 0x8703b0dd 0xcab30fa4
-- 0xd6db2ee6 0x5cc2e5ac 0x717e636b 0xfdcbc760
-- 0x563b3b25 0x0e4df458 0x9efb8fa7 0x95aaa7a1
-- 0xf05b6680 0x5e237e59 0xc884018a 0x177b5a30
-- 0x3ea2c9bc 0xd0325ee6 0xb1dae51b 0x812ee29d
-- 0x6d58db21 0xb787fa68 0xfd092294 0x09683dd3
-- 0xfe0d6405 0xfdd99aad 0x78744a59 0x936738e6
-- 0x6ad6cba7 0x370f7f8f 0xd208c214 0x12239384
-- 0xbe71f0e7 0xfc0ef264 0xc04e4a49 0x354f9cf3
-- 0xf5d7572c 0x07839ad0 0x834a003d 0x23ba26e2
-- 0xf4049ecf 0x5ff402b2 0xff9d6769 0x074ebe6d
-- 0xdc829da1 0xc3d7697d 0x973efe4f 0xfc2a9165
-- 0x126dc518 0x0b824ca4 0xc438fb70 0xb7b0ee00
-- 0xbe56afd9 0xa3d8defd 0x971455ae 0xc11ffde7
-- 0x346e619a 0xb41111a9 0x6004b62e 0x896c668d
-- 0x738e458c 0x351f9fdd 0xe771b2ba 0xad6d7464
-- 0x719b57c2 0x6f6a4611 0x8a676f2d 0xb8db1c43
-- 0x3f102641 0x51bffdbc 0xb7862565 0x5d8dd231
-- 0x7a79bd39 0xfa472894 0x0fd1d2ff 0x64cf589a
-- 0x38234d7a 0x5c9acefd 0x8eb0b9f8 0x761e1c95
-- 0xf2fe78fa 0xe06220d7 0xaf82a919 0xf4e196e1
-- 0xa17c8935 0x06d08d16 0x6bad807b 0xf410805d
-- 0x4ff2bce6 0x3297c81f 0x06e35353 0xbe1f5e1c
-- 0x65d1cb92 0x0dc69b2f 0xac55d597 0x636ff24c
-- 0xe2e4f2ba 0x63d64922 0x4b2e9f71 0xad2279ec
-- 0x5f0b5c0e 0xac688638 0x35613358 0xf5531360
-- 0x54a304e8 0x27ebfe65 0x977b5a3c 0x3dc5e10c
-- 0x73b32ee9 0x3a2c9454 0x30a149c6 0x31e5b55c
-- 0x2c10854f 0x745cd38a 0x2853a27b 0x6629e355
-- 0x0bb67e39 0x5469184d 0x694a9bb6 0x0a0ca25f
-- 0xa878c5de 0xee15fd46 0x23d92ff8 0x02328404
-- 0x1c9402b5 0xa46b6ce0 0xefc3e947 0x0e9312ad
-- 0x5830ae9e 0xe30e32f2 0x9db8ee81 0xe8aeebbc
-- 0x30675c83 0x447278c2 0xab2bad3b 0x08ba3d0c
-- 0x1124e681 0x3691242d 0x903c8d2b 0x3281c312
-- 0x22af690f 0xd69a150c 0x57622c5b 0x29313c73
-- 0x6ab2d7c6 0x39b06dad 0x6e1f9f81 0x03324986
-- 0x53a49093 0x7654eba3 0x2527245a 0x9af596fb
-- 0x818ffb3a 0xa3817173 0x6a2c4b80 0xfcc42ad5
-- 0xfb1bbb69 0x3a3720a2 0x90a89bcf 0xed80308d
-- 0x7753cb1c 0x1c2654a5 0xb01ee4af 0x81091e85
-- 0x9067b3f1 0x2e2b9b5e 0x9fb0c7d1 0x78fd9f69
-- 0x5771c46d 0xacdf498d 0xfd8b8e77 0x4c15fa61
-- 0x607120ce 0x18a298d8 0x73716420 0x65e5e06a
-- 0x18c53e04 0x35b84427 0xcd82b522 0x9a7d26bb
-- 0xd56b4b74 0x49b47fe8 0x63178dc6 0x0bac0f46
-- 0xc8b0755a 0x9bbaaf1f 0x18131d2b 0xcc019330
-- 0x0ceb89bb 0x8808c2d6 0xfb5bd86c 0x6c945b71
-- 0xdc911924 0x4ebb8d35 0x44e46d08 0xabfee615
-- 0xf456931f 0x7a244955 0x0bffce7d 0x5533ca5f
-- 0xb1b2c636 0x4f29075e 0x64012561 0x7aa5e7c7
-- 0x9c8a0666 0x9698782d 0x3481ad8f 0x21a55b19
-- 0x735aa45d 0x4245b9c4 0x0d4c3fdc 0xd1b10966
-- 0x7035fcde 0xc2257947 0x4a37271a 0x9da464a9
-- 0x228adbf8 0xbf309e03 0x096f560a 0xa2b8ca78
-- 0x427702cd 0x35a99cf5 0x99811758 0x6953db58
-- 0xec07533e 0xe95838b9 0x61c71654 0xc9cce595
-- 0x275af106 0xc8697af3 0xb3f27e58 0x411d8d30
-- 0xd0d90ecd 0x1503b9dc 0x76bf070e 0x49f89ef0
-- 0x7333b083 0x53f9c44b 0x8330c3a2 0x6a1119c3
-- 0xca555f2b 0x3d51fc6f 0xac7b3320 0xf8e42cdf
-- 0x053753fe 0xc122336f 0x94d289c6 0x088b5a64
-- 0xc3aac7f0 0x96a76344 0x2ff05828 0x9b4f2af3
-- 0x46de6a46 0x4ed29d98 0xe2ab7634 0x27481ddc
-- 0x300ca71f 0xce7ac539 0x88240e09 0xb1a14e78
-- 0x2addd4c5 0xb3a7f320 0xe91f549b 0x6881c45b
-- 0x0e381c47 0x1018feb4 0x64679650 0xe62281cc
-- 0x670ee6d4 0x0d226160 0x947b7f08 0xbc595a74
-- 0x2380c0b3 0xc0235785 0x63b41221 0x80b9cc31
-- 0x3231b4ae 0x33ed5718 0xf2c5c90f 0xdd3b03ea
-- 0x67dfca08 0x453e9d29 0xa2bdecbf 0x5e9a3181
-- 0xad17aea2 0xff0a8f13 0xdf946849 0xcfbbecb7
-- 0xb0a602d7 0xb1a820c6 0xfe7abbc8 0x7f70790d
-- 0xeb5f8863 0x266d3cc1 0xbd552a44 0xe19b1b3d
-- 0x856aefbd 0x51c11f1e 0xde661b7f 0x61c075d2
-- 0xd0f6a834 0xff1d0d37 0x6793d1c2 0x70c133a5
-- 0x20c4d2cf 0x8c80d4d3 0x61ebe382 0x788b74df
-- 0x11c56903 0x535889ba 0x0a9c7380 0xf9de2837
-- 0x09437fe7 0x1627c6b2 0xb943bdb8 0x69bc29b2
-- 0xee9795a4 0x83c992e0 0x95437918 0x8ce166a2
-- 0x56b56b66 0xb0680941 0x623d38a9 0x2add07ad
-- 0xe583ba09 0x96f6532a 0x3eff4696 0x2a8a6b0b
-- 0x905b913b 0xafc01673 0xe871e006 0x2c2339ad
-- 0x248438e5 0x96d83e53 0xb3a75d6b 0x2258cf63
-- 0x69ff39bf 0x95727173 0xc3ac09d5 0xea8d2c06
-- 0x0e7c0a4b 0x144fcade 0x28a9a5a3 0x97c11ae8
-- 0x89865e3d 0x1640cd32 0xe3e551f8 0x1f7ba770
-- 0x6d23fb31 0x11eceae3 0xc8ccb8ee 0x46dd0bb0
-- 0xd01a46ff 0x0504adf5 0xec6e170e 0x2e3d7ac5
-- 0x70f893ac 0xaf9963db 0x061e283c 0xf0ad248f
-- 0x2fe97e19 0x881fd340 0xc686c9d5 0x88ea8ba5
-- 0x92f05cd7 0xd6716148 0x6fc47fc3 0x2c51d9b9
-- 0xd50a7faf 0x4eccacd1 0x7c92f802 0xa63ffc83
-- 0x7cb0ab1d 0x4492e81b 0x7d906554 0x43306ba1
-- 0x73a5d57a 0xe57a05d6 0x6850b964 0xefed595c
-- 0x7754978f 0x629e8236 0x62ec4dde 0x247439ee
-- 0x8b9982fa 0x4eece5c2 0x48599175 0x0fdc752c
-- 0xecd87b12 0x94936c75 0x17a45ea1 0x80a899ac
-- 0x22a39ee7 0x745730b6 0x03ea4daf 0x4a7570d7
-- 0x307621fa 0x7322e0a7 0x3a8e0316 0x454e46f7
-- 0x08773750 0x156dcaad 0x5562bc06 0xa23a1ee3
-- 0x20435211 0x1d679ea0 0xb220e205 0x682cc1a6
-- 0xd64a71c7 0x3ca7f8e3 0x2e92f253 0xa7cfdd0b
-- 0xd62b4053 0xf5c5f641 0xbf72dde1 0xdcb716c1
-- 0xe2f7b05d 0xa03145ea 0xc09828d2 0x7dae7916
-- 0x6fb97c79 0xb3a85204 0x998a9c7b 0x5f42ba8c
-- 0xd9c628b3 0x6b17bacb 0xa889b716 0x450ff97d
-- 0xe9166f3c 0x2d20777b 0x82a003ae 0x2c7ae0aa
-- 0x6011a9fe 0xfeed34be 0x1328f67e 0xf61003a3
-- 0xfaecdf20 0xee18c81e 0x731a0302 0x11a39e60
-- 0x355d78dc 0x99088f2c 0xcf253759 0x97347603
-- 0x736f71f1 0x37e4b395 0x9cc74540 0xf7e39994
-- 0xf01c5f64 0xbec519f1 0xa79c1067 0x76000d5e
-- 0x1ac85b6e 0x51e5b7a3 0x62a97ddf 0x6f20096a
-- 0x2af51e77 0xea5554f6 0xb4e581da 0xc1ac4ba8
-- 0xc8f22bf7 0x9e254d3b 0xd7dd62f6 0x6461ae3e
-- 0x423e1f10 0xf143e7b9 0x18c73b04 0xa43de614
-- 0x2da8d02f 0x9befa706 0xc01dcd49 0xa278f1e0
-- 0xd85f3177 0x6b6679fd 0x1ccef04e 0x53af9252
-- 0x34d751db 0xc8d32c86 0x3d725097 0xa64ed581
-- 0xd090c42f 0x9e92bf3f 0x6f82b089 0xd42728eb
-- 0x3dd651e0 0x1985bc52 0x4b0f4159 0x0f99bd7f
-- 0xe2597023 0xca0cae4c 0xce48a894 0x7249dd88
-- 0x8e146632 0xb4be1d6c 0x790ae7e5 0x6747b657
-- 0x52143947 0xa2e42ed3 0xea359617 0x6ca01a11
-- 0x35c5e2dc 0xc97b78fc 0x5db6db2a 0x80fe3414
-- 0x27da19d4 0xd7431d04 0xa91e9110 0x7d8ecb23
-- 0x2508700a 0xc8c71ed9 0xd28835af 0x018c2887
-- 0x3d0a6fab 0x3e8523d6 0xd0688dee 0xe5c3865c
-- 0x838d72e4 0x6bb73a1d 0x497a59ca 0xf77c56de
-- 0x38ecb72e 0xa55e3565 0x04b12c92 0x1aec9997
-- 0x037c340a 0xef0d04c3 0x78f74bd6 0xdec9b9e8
-- 0xd95b61ea 0x5528e8f5 0x4ecd325c 0x88ffdc0b
-- 0xb337ac61 0x899d90e7 0xb5eeb978 0x8295d9ae
-- 0x1ed8978b 0xa8849eda 0x8633b4a3 0xb8c858b5
-- 0xbe3c4375 0x28b9e84e 0xb2a26def 0x22f8f66b
-- 0x3a4aed99 0x0c4914ea 0xad103249 0xba5a5eff
-- 0x8a052461 0x26938899 0x915c6ed7 0xe6268ad9
-- 0x246e8c74 0x75f3c196 0xc3e725d6 0x92e02549
-- 0x1f78a5cb 0xeada57e5 0x40f14906 0x0215e49c
-- 0x57c06bae 0xc1896b87 0x0cd40a63 0x60741d80
-- 0x11a69899 0x80fed942 0x0497e115 0x56697b55
-- 0xba89c3d4 0x27d6b7c5 0xddff87b0 0xd3b1ff2f
-- 0x3160e528 0x9cca1286 0x13b4fdf1 0x38cdd907
-- 0xb50c4597 0x4c151714 0x1cab86c7 0x23126a3e
-- 0xe26e9749 0x289a0d0e 0xc4004640 0x9d33928d
-- 0x33b691a2 0x15ed6e6b 0x6e773980 0xadd59678
-- 0x188ba49f 0x08da4c6d 0x6d150d0b 0x0c6c7b98
-- 0xc8e1df7e 0xb8b1e692 0x5e89fd35 0xcb253d24
-- 0xfc6ee27c 0x8013de3d 0x1d38012b 0xe50a8f7b
-- 0x7d410ff1 0xceee4e9f 0x0e8094b6 0xaa1a5f57
-- 0xb395a551 0xbd62b2ae 0x5d7b34c8 0xbd2d6195
-- 0x33af4109 0x0769ff18 0x9c6cc123 0x78ee6eb6
-- 0x412644e7 0x70e0c6f4 0xf45d8fc6 0x0435f5af
-- 0xd43622b7 0x27409d5b 0x6dd04e8f 0x9f02ecf5
-- 0xca415f7d 0xc9f439c2 0x7198e539 0x20476b75
-- 0x3cdd8dd8 0xce17fbb0 0xa5bc115e 0xb0ee52c1
-- 0x0b074cfa 0xd26d4f99 0x3b43320b 0x230b680b
-- 0x9908f2d2 0xcbcb1952 0xf45a2f53 0x7b4564c6
-- 0xcf2fd983 0x414fe4b2 0x55ea7f11 0x63e8117d
-- 0xe8954052 0x7c2ea344 0x97a02aaf 0x6ca874c3
-- 0x1ae5b4ee 0x41754eae 0x6954abe0 0x115ddcda
-- 0x9a27968b 0x32a53e65 0xffe47b2f 0x4fe7e5a7
-- 0x6016dedc 0xb3c0893e 0x9626776d 0x5ec773f9
-- 0x1104e01c 0x1473cfb3 0x43b2cedf 0x8ca9d119
-- 0x7f1bc844 0xd8bb7387 0xba90d2ef 0x2bb0dcf4
-- 0x2340f124 0xa5bd514c 0x50afab05 0x718f5ad5
-- 0x7c03fad9 0x71d00d2d 0x1c31fdc2 0x4a938809
-- 0x40945ded 0x437f2a0d 0x83c10d64 0xd224c6ab
-- 0x0cd44481 0xb0040966 0x27fd6e7f 0x6ff45d4c
-- 0xab057ad1 0x8fa4e5d4 0xac50270c 0x6e4926ca
-- 0xc5721498 0x2529b458 0x40ee2ad5 0xde5e21f2
-- 0xea8964ca 0x56766e60 0xdc3b8702 0xa93528d4
-- 0x28d7713d 0x42edf022 0x59774dd8 0x200ff942
-- 0xe7a4d769 0xd8c4ef5e 0xe177f715 0xe9d53cd6
-- 0xc11270bb 0xb25977e5 0xb80867b4 0xfb48468b
-- 0xdbf166a8 0x49700d85 0x0f85f98a 0xa7ca7a75
-- 0x109817ce 0xca243f19 0x8bed7688 0x9a1c8231
-- 0x94f0ce97 0xc36309ca 0x90ecac24 0x67e7e0de
-- 0x86b18d62 0x18c7b7a5 0x622f5d3a 0x47e1e067
-- 0xdc96b94d 0xe4a03beb 0x59d17692 0x040abc0d
-- 0x44a5ae50 0x3d3dab7d 0xc18dfd30 0x2802b9d9
-- 0x6818379f 0x56db41d7 0x97cbf039 0xe41d6a32
-- 0x64b5fb01 0x6506e0b4 0xd60a3234 0xdf3573d2
-- 0xac148579 0xe7f46ac0 0x05e1c763 0x904a5aa9
-- 0xc7ca1ee0 0xe0c3b047 0x5e36e1bc 0x447a9141
-- 0xe24654df 0x9853a49b 0x6a29cedb 0x022f00dc
-- 0x6df2a7a7 0x3636da02 0x72bb9c81 0x4f0e0918
-- 0xd649f4a5 0xbb0c81f9 0xc0ba93fd 0xc1b390f1
-- 0xda84e720 0x1aea0064 0xf3ee67e1 0xb874ef4a
-- 0x82467ce6 0x59abf506 0xafbf145a 0x9a4cf8a1
-- 0x17247c89 0xd8669398 0x1796eaf7 0xbc2d24a9
-- 0xcb486570 0x17a9db23 0x3e6504f0 0x08684517
-- 0x2723ab28 0x7081b814 0x8a265a04 0x697e6d8b
-- 0x69b146dc 0x6434c182 0x27ec8101 0x864405c5
-- 0xfff86c9e 0x3052d8a6 0x23d283db 0x492970e8
-- 0xbc6c64c3 0x46d8f98b 0xe16e7ff3 0x731e4f82
-- 0xbd26b1af 0x6b30e6c1 0xff192fce 0x097e0bba
-- 0x49df63a5 0x2fdc3f01 0x50aae053 0x60177b8f
-- 0x1949eb85 0xa46084ce 0x9658f694 0xcb951fbc
-- 0xc53806d9 0x63a17d30 0x3b3f86c2 0x8a37aa6c
-- 0xedf8fe5c 0x87aee1d3 0x8c680126 0xfd8b27a6
-- 0x231fa106 0x69358c25 0x4502c348 0xc107861c
-- 0x46280e70 0xcf6067ac 0xf6a04ff3 0x3e488677
-- 0x6f3fb4c1 0xeec1f758 0x560e1c48 0xb604c06b
-- 0x69e34b1e 0x8ef41dec 0x854cea22 0x726581d7
-- 0x55ea91f3 0x38ae4053 0x5ff7389d 0x6952cbf6
-- 0x09aa0fc1 0xcccb1d50 0x5c1a633a 0xde1eba46
-- 0x797212d8 0xa943fb3d 0x6063a1a8 0xbe68ef36
-- 0x6ba0d5ba 0x0dbe2061 0x47711712 0x62679807
-- 0x6f34009e 0xe6fe8f18 0x66a6a64b 0x3f80f472
-- 0xe953d5e0 0xbcd8196a 0x086faad0 0x49da7f16
-- 0x7f2199a5 0x55af4af2 0x085b4d38 0x22e634bd
-- 0x6cff0416 0x343466f4 0xd121a7a6 0x6caa3942
-- 0xe4f365a2 0xd832eb0c 0x616728e5 0xcca4c71a
-- 0x4010cdc2 0xd0f1d1cb 0x5e695f89 0x27719206
-- 0x0ec92854 0x76144a1b 0x49808021 0x12457a1b
-- 0xdde7aa5c 0x8f1a077f 0x110a4a5a 0xb3a5ad31
-- 0xaacebf8f 0x66ff7f33 0xa2340971 0xfb4c7e82
-- 0x8dd536d7 0xafd2021a 0x72aa9c6e 0x22df6952
-- 0x83c4b4fb 0xba515555 0x93eee8f0 0x22d0ed5a
-- 0xbec05586 0x83828f28 0xe0d7f930 0xac0f0199
-- 0xef6d76f9 0xf56ebdf8 0xf67323c9 0x8b805745
-- 0xce5902c0 0xfa2ce3da 0x10f836dd 0xe1ac6d97
-- 0xa0e415ea 0xbb7c32ad 0xc421f3b0 0x8166e898
-- 0x74e7a73c 0xf454b82a 0x631369b1 0xe30ed23f
-- 0xdaa1c75b 0xe7c9c6a7 0x5f33c375 0x99c05187
-- 0xf2d6e6ae 0xcd2045b8 0x92ff3009 0x15082015
-- 0xd1a1580e 0xdce25f9b 0x21984a75 0xa9be5388
-- 0x099a5372 0x3ab9bcfa 0xdb9069aa 0x49a99be6
-- 0x42a9ee0b 0xfe32d832 0x24e11ad3 0xd16f596b
-- 0xb95982cc 0x754ab1c8 0x42ffa128 0x539e823d
-- 0x28e0f976 0x262ddfc0 0x2a16e7ad 0x49b5acd9
-- 0x931f3def 0xdc419b84 0x8412cc3c 0x81056cd9
-- 0x91933e1f 0x57710b15 0xa55d2696 0x87d88724
-- 0xd4fedfdc 0xcc3825c6 0x397f382f 0x80f9b6ba
-- 0xcdd6d59f 0x24b984d8 0x8f1c5bcf 0x25bcef1d
-- 0x00dc603a 0x76fd94c2 0xa267a7dc 0xa6e90a6a
-- 0x5c5916d6 0x065a52cf 0xa28d3263 0x9b17b72d
-- 0xb8436b48 0x1b1c2391 0x1fda3395 0xa6cecbcb
-- 0xbc4ec502 0x1766b590 0x5945fbd6 0x6a124405
-- 0xf92d06f2 0xe24694b7 0xf6befd08 0x8266cf5c
-- 0x03ed670a 0x5f98be62 0xf27b7e2e 0x598cf22c
-- 0x2e855591 0x879815fb 0x153799c6 0x3820faf6
-- 0x3d3a2cc6 0xdbb6dece 0x1a3c46b2 0x5031bdda
-- 0x47894c03 0xe43661fe 0x7a6ee548 0xa5ca9779
-- 0x6aa9e105 0xbc8505a3 0xa03b860a 0x448faeb9
-- 0x367de4a9 0xc9779c7d 0x6535ad8c 0x4b7fcacc
-- 0xb2db5c10 0x0ab41ec6 0xe528ab90 0x5e6f03da
-- 0x98bc76d3 0xf38df42e 0xea59b039 0x1c2eaa28
-- 0xca30dac5 0xdb0eb8c6 0x60063860 0x18823f8d
-- 0x164e2f28 0x7cbbe080 0x70a12315 0xb08f44d9
-- 0x5fbb9453 0x4bc62738 0x9fa15ffc 0xe4033ca1
-- 0xc9dfbc13 0x58245d7d 0x588113aa 0x8f5a6ac8
-- 0x92588a60 0x26330c74 0xb2aaf0e3 0x24ada1ea
-- 0xa9e973ae 0x624b73e7 0x4ef961db 0x95ede155
-- 0xf2bb86ff 0x96bc79d9 0x95cd646b 0x1c3af453
-- 0xf60fa711 0x10905115 0x0e24b740 0x169bb227
-- 0x34cee6f0 0x990980db 0x18d8ace5 0xd4c87504
-- 0x29515d32 0x2e5d9c04 0x87dffa60 0x12e815d1
-- 0x021db8e9 0x2c5a42fd 0x6e3a1a13 0x88889ab5
-- 0x3bc915a6 0x608919c5 0xd310a970 0xea8f3218
-- 0x949f55bc 0x9ed7aadd 0x6d990157 0x181f1c2f
-- 0xa940df64 0xf3be8c39 0x7ca2e699 0x7b4f07f9
-- 0x89e83fee 0xe66b9493 0x54fc3d17 0xa63d2d46
-- 0xd5e835d5 0x910e0144 0xecf67025 0x1fa6a93a
-- 0xe692dbca 0x466af681 0xc2bc808c 0xbb4ebd60
-- 0x74d5c729 0xa283ad25 0x1e66fa23 0x6d372988
-- 0x753c9fcb 0x1742efdb 0x5b68cf15 0x372a0e33
-- 0xaa3a7ebd 0xa0e944d5 0x95d5cbb4 0x4fb6020b
-- 0xced927b0 0xb2afea78 0xd0646b72 0x1622fad4
-- 0x4672c6b6 0x736ae4f8 0x8d46a4db 0x0e6a432e
-- 0xe0a30a98 0x4c2bcf4f 0xd87acedd 0x19682d7a
-- 0xf97c025c 0x55d8feb3 0xbcd4d2ff 0x236c6f9f
-- 0x8ba0246d 0x42812f73 0x327636f5 0xc92cd30a
-- 0x08a69d9d 0xc735a946 0x82eca01f 0xda0753a0
-- 0x7077b1d1 0x17b05834 0xfa24bc02 0xf49f4473
-- 0x8f9ac6b4 0xa880c630 0xf7457b4d 0xd5f829e4
-- 0x25c49a99 0x1176a997 0xbb2d2009 0x61d35764
-- 0xa322c752 0x6ef3ae02 0x5faae6f8 0x9a52acf1
-- 0x19176f43 0x43843b07 0x14efc471 0xee474403
-- 0x319c4857 0xa19adcf0 0xc0a466e1 0x02db14ad
-- 0xb7f211f3 0x72aa6ca6 0x0eb9bffe 0x48a6d284
-- 0x9a93a2ee 0xac09fc5f 0x92a62c4f 0xd34f0271
-- 0xffb348c7 0xf229b6e2 0xc68ec1ca 0x19577dbc
-- 0x069a10bf 0xf64ac347 0xf7c3c848 0x81975294
-- 0x6376e550 0x93b53440 0x8bb17daa 0xc4c64c07
-- 0xcaeff293 0xd51497b0 0x33da3565 0xa73d5def
-- 0x4bf4dcde 0xfb470fcd 0xca7db864 0x7ef17022
-- 0x47567363 0xd8fb8d74 0xa68c3c72 0x8202e4f3
-- 0x75bf1798 0x16a70fd2 0xcc3b697f 0xab9a1075
-- 0x13f56ef3 0x269d0302 0xcb655a43 0xc9a4de88
-- 0xfb8363de 0xff40f36d 0xd2555489 0x647a7995
-- 0xfd8eda6e 0xa3958c9a 0x20e029b4 0xbed3e225
-- 0xa7df5f17 0x63bc3c1a 0x337ecc9d 0x6c329508
-- 0x786aa47e 0x1db5b093 0xc0acd73b 0xf9587237
-- 0x243e5d40 0xd3623c3a 0x338c4740 0xb672140e
-- 0x43640a9b 0xb7ef3f6a 0x44151074 0x749bcc46
-- 0xfa1f103b 0x0fefb19e 0x58855538 0x138ad276
-- 0x2641fd80 0x297d99d0 0xfaa63ba2 0x00b6f11a
-- 0x3793fb6b 0x124763a1 0x8b9419ac 0x56abf9eb
-- 0xdbf83419 0x43570571 0x37299cd8 0x8b201e62
-- 0xa4058fa5 0xb320e91b 0xbe7d40b7 0x4eca3b2d
-- 0x8519c155 0xf4b17021 0x9e4c572a 0xdc1f9e16
-- 0x39a589a3 0xa6cfc7a8 0x5b986910 0x64e150e7
-- 0x60b6f2c1 0x02bacd3f 0x2f3b5a5c 0xc6f453a8
-- 0x15a87a7e 0x76104a14 0xafa2ef63 0x2cd48dbe
-- 0x3c7abddc 0xd786ea5a 0x4f65867a 0x355cda38
-- 0x2ae03d9e 0x4f11f6be 0xfc0a0034 0xde4ea602
-- 0x21ff83ea 0x0f12d913 0xedf4da28 0xc96d8fd1
-- 0xd7e82c3c 0xfec63bdc 0x37a456d7 0x3007e18c
-- 0x091a47b6 0x82f1c641 0x82219cce 0x3e7e6993
-- 0x7b3a2115 0x0b8e1a02 0x40f88213 0xfa2f9c21
-- >;
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/m12306a9_00000017.dtsi u-boot/arch/x86/dts/m12306a9_00000017.dtsi
---- u-boot-2015.01-rc3/arch/x86/dts/m12306a9_00000017.dtsi 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/dts/m12306a9_00000017.dtsi 1970-01-01 01:00:00.000000000 +0100
-@@ -1,750 +0,0 @@
--/*
-- * Copyright (c) <1995-2013>, Intel Corporation.
-- * All rights reserved.
-- *
-- * Redistribution. Redistribution and use in binary form, without modification, are
-- * permitted provided that the following conditions are met:
-- * .Redistributions must reproduce the above copyright notice and the following
-- * disclaimer in the documentation and/or other materials provided with the
-- * distribution.
-- * Neither the name of Intel Corporation nor the names of its suppliers may be used
-- * to endorse or promote products derived from this software without specific prior
-- * written permission.
-- * .No reverse engineering, decompilation, or disassembly of this software is
-- * permitted.
-- * ."Binary form" includes any format commonly used for electronic conveyance
-- * which is a reversible, bit-exact translation of binary representation to ASCII or
-- * ISO text, for example, "uuencode."
-- *
-- * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
-- * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
-- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
-- * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-- *
-- *---
-- * This is a device tree fragment. Use #include to add these properties to a
-- * node.
-- */
--
--compatible = "intel,microcode";
--intel,header-version = <1>;
--intel,update-revision = <0x17>;
--intel,date-code = <0x01092013>;
--intel,processor-signature = <0x000306a9>;
--intel,checksum = <0x3546450b>;
--intel,loader-revision = <1>;
--intel,processor-flags = <0x12>;
--
--/* The 48-byte public header is omitted. */
--data = <
-- 0x00000000 0x000000a1 0x00020001 0x00000017
-- 0x00000000 0x00000000 0x20130107 0x00000a61
-- 0x00000001 0x000306a9 0x00000000 0x00000000
-- 0x00000000 0x00000000 0x00000000 0x00000000
-- 0x00000000 0x00000000 0x00000000 0x00000000
-- 0x00000000 0x00000000 0x00000000 0x00000000
-- 0x86c5b0d4 0xf6978804 0x7f4f5870 0x6319dc3c
-- 0xbb3b7d61 0x33cf9075 0xe8424658 0xf611a357
-- 0x5a3401db 0x42caecce 0xb4d8e75e 0xe6dbaf24
-- 0x7861b35f 0x6bd717bc 0x23b9b731 0x82ec1ac8
-- 0x20337b64 0x5396dbf1 0x59973bff 0x724bc7e9
-- 0x5237193b 0x0b8647c1 0x6a0d0e16 0xbf9ddb5b
-- 0xace2cc1c 0xad707638 0x056f102f 0xa37e60f8
-- 0x76255642 0xfb86e030 0xb8069a40 0x367795f1
-- 0x653fb05e 0xab7f14ad 0xb6e8a8e1 0xd2598d20
-- 0x2eba3f68 0x78b372f1 0xba8d13f8 0x1f1de861
-- 0x97f951d5 0x8097c728 0x27dbf904 0xb97906a8
-- 0xffe7a4ac 0x4b947668 0xc1dbd726 0x2adcf777
-- 0x63b1bcf0 0x818e2a1b 0x49aa907b 0x2faf5e8d
-- 0xae842352 0x82707fae 0x0aa12b41 0xa0bae11c
-- 0xb4298c47 0xd2b4099c 0x4ff625f2 0xcd2630d4
-- 0x79850981 0x05dbf57d 0xb05b81a5 0x56e73ec7
-- 0x95cb3897 0xe262bda5 0xb2c6e288 0xcb7f8e77
-- 0x72b8bdd3 0x3f400494 0x63ade65b 0xbc4adc71
-- 0x00000011 0x06c0f8ff 0x0eb63d77 0xc54cdabf
-- 0x76bc8860 0xdd142643 0xe7bfc220 0x17aa0a91
-- 0x4fd676ba 0x4b6b1a15 0x2a1a1c16 0x4fed6de0
-- 0x8c3d6bcf 0xbb319bf6 0xa82532f1 0x7c8ce014
-- 0xb830a38b 0xec25bc6b 0x61c8a8a9 0x49a21dba
-- 0xfcf8bad0 0x7372f29c 0x1f7fbcdd 0xc2ff42f4
-- 0x780878f0 0xc967068e 0xe19cc3c9 0x155e6646
-- 0x75235c43 0x9aaf3741 0x9dfd116d 0x0f031b6a
-- 0x4963e039 0x6918daa8 0x7f0ca4ab 0xd77dad79
-- 0x2f8847e8 0xf79c82a4 0x6a6aaad4 0x24f07dbc
-- 0x895d3f6a 0xc96b2eb0 0xff50228f 0x573d364a
-- 0x5fca9d56 0x3c11c35b 0x3e90fb12 0xc4604067
-- 0x5c980234 0x7c42e0c7 0x60cca3de 0x637a4644
-- 0xedc43956 0xb0efb4e1 0xe94716fa 0xa6478f51
-- 0x33965654 0xdf6b40a3 0x48ac1b18 0xd6723c94
-- 0xf040d6d1 0xaf850470 0xe2bcde48 0xb90a4998
-- 0x8f620105 0x3d592878 0x2f697bad 0x9f7721d9
-- 0xec34444a 0xb0594770 0xd7180f9f 0xa510a168
-- 0x460563b0 0x5d4f34f4 0x21dfc16b 0x051de344
-- 0xa57bc344 0xff2c7863 0xf0bc063d 0xf5a89004
-- 0x79a81dab 0x9e8cb974 0x2309b0a4 0xa47a46de
-- 0xcf9c0c44 0xf761c817 0x67ab642c 0x0db4422f
-- 0xca3616fc 0x79e66c8a 0xd56a3332 0x5e0f338b
-- 0x5814cb3a 0xed1b9a4d 0x47d59f72 0x25b03786
-- 0x3edd1d42 0x8cd947cd 0x706e6ebd 0x82c2bada
-- 0x1bf6a96b 0x77dd859a 0xda35335f 0x22fab458
-- 0xd0661fd8 0x02bb4a42 0xe2a2bcdb 0x0616580e
-- 0xd35be23f 0xc206d16c 0x401218be 0x51107c3d
-- 0xba84b8be 0xace4d8f2 0x505b9b28 0xc517034b
-- 0xac5ba582 0x7419fe54 0x43493cb1 0x2fe0a66e
-- 0x206039b5 0x07569011 0x230ce53d 0x168d427f
-- 0xbfe0bd10 0x82bf11be 0x5b55475b 0x5490a0e9
-- 0x1c3c1e3c 0xacad77de 0x1666512f 0xfc3250d8
-- 0x930a6312 0xdd85c066 0x1b95c18f 0xc8bbd3b0
-- 0x1bb2a34e 0x642c7653 0x0f536213 0x1f7ab4eb
-- 0xaa5ef677 0xe6ac9581 0xd7a2fe73 0xd417dc79
-- 0x455a6877 0xae825a40 0xe0c98bec 0xac39ba49
-- 0x299d9bd9 0x957d0bb0 0x1645111b 0xe9da4beb
-- 0x1b005ce7 0xddb742ce 0x6c5f3ffc 0x24f74d2c
-- 0xf4ace044 0xb21bc7ba 0x338002dc 0x240effa1
-- 0xd208ae00 0xfe8c2b5c 0x9a457293 0xd9365ac4
-- 0x98f24244 0xf6d1aaea 0x7b874350 0x1ba4086b
-- 0x1d3bf168 0x2bb6f4fa 0xb27f8477 0x8da836f6
-- 0xa8762693 0xc377fa64 0x74cfd979 0x90435c25
-- 0x29d80e17 0xc3503c9c 0xaacd2178 0x232c748d
-- 0x6fecd3ba 0x00fb4aa0 0xbac3ee19 0x6e5c63e3
-- 0x17823c14 0x0e9d33bc 0x0fa9de06 0x998b14b2
-- 0xfdd8c80d 0x01b0591b 0xf70bc4ce 0xb278c496
-- 0xa7e30708 0x69cf8420 0x14f8b744 0x8bb8a0ff
-- 0x168f6db0 0x95da6db2 0xf96d121d 0x67fd06f7
-- 0xcd81d278 0x8693d095 0x15e1a24c 0xe5f554f2
-- 0x499874e8 0x30fc0785 0x0f4fa1b9 0x65c93dad
-- 0xd939bf24 0xdad29721 0xf253b752 0xf6ff59da
-- 0xc5dfaffc 0xf0071f34 0xdb0db8b0 0x24475e2d
-- 0x2a4d5b8a 0xf7624bea 0x3fdcbc90 0xb5a66e35
-- 0xd0f08636 0x24643caa 0xc5d08e83 0xb134c55c
-- 0x8e3653c7 0x34496b0c 0x6b2aeebc 0x2fbab601
-- 0x105613a2 0x7babd55d 0xa01af846 0x248be690
-- 0xed27917c 0x26ee6e13 0xa1dac5fe 0x852ed91a
-- 0xfc83fcca 0xdf479c33 0xfd6efe96 0xdc62521b
-- 0xa37d2a8c 0x1d2bad9e 0x4287614f 0xc4f7b62c
-- 0x2aab0562 0xec6d4226 0x52853fb4 0x264e3507
-- 0x1c3af366 0x33269776 0x81b8529d 0x115530dc
-- 0xe035f98f 0x433d1b6c 0x1ea6daea 0xecfd2ad2
-- 0xa57a0c22 0x1dbe3e12 0x6fafe41b 0x8e579e35
-- 0x6c493fbb 0x034dd4f9 0xd17cd6f2 0x05c5cfa8
-- 0xd9bffa39 0x0fc16e9c 0x831b88c8 0x7e7dce3e
-- 0x3320bc7f 0xd5abafaa 0x217ab526 0xade2597d
-- 0xf01b00f2 0xc9e34b72 0x00a4cb0b 0xdc198512
-- 0xdc7cc8a1 0x89db07b5 0x6c2153ea 0xb8bdb8aa
-- 0xdf8a1ae8 0xa517f6b1 0xd32569d9 0x37e79008
-- 0x3c7527c3 0x7d5b2d3b 0xb31cb907 0x35db7f6c
-- 0x0ab0cd65 0x75feaded 0x7c8260a9 0x5bc04f56
-- 0x2fac9f60 0xd7b3a2c0 0x2b393634 0xc2df7f43
-- 0x1ff2fa9f 0xc81af169 0x188b1f4e 0x08bf6f86
-- 0x5ab2f188 0x0a71eb64 0x03b57501 0xa684fc23
-- 0xa729ffef 0xe3b4a709 0xf9eb97d2 0x01506c95
-- 0x0d9285f5 0x8e1ee93c 0x7d15a0d8 0xd9390673
-- 0xf116ebd8 0x7e68798b 0x3dc8412e 0x5a9a04b4
-- 0xe3805f51 0x00493bb1 0x4ec65ca2 0x2aedd69a
-- 0x7f2a5b18 0x9994ac32 0x476f3703 0x7d3da882
-- 0x5635f55f 0x7a0887e0 0x0af46feb 0xfc2f3591
-- 0x02e29400 0x70fd3234 0xc549379e 0xaf34fa5a
-- 0x5bf7c649 0xeb183cff 0xa236d508 0x4525ab64
-- 0xc4301026 0xf281df99 0x0b298e46 0x9b7c1a99
-- 0xc4b24e77 0xea536992 0x5a39e37c 0x570fb6df
-- 0xae5d5c49 0x01142cc2 0xda05d3f1 0x337bf65c
-- 0x3c986598 0xbecefd30 0xb5e34c2a 0xe7c3847f
-- 0x18cb24b4 0x71278c26 0x4b8d6caa 0xaf7c300e
-- 0xfb6ce9b8 0x94c4b785 0x67275f17 0x59498cf5
-- 0xca8eeec6 0x3374e7a6 0x649affac 0x9049ba78
-- 0xff9d3908 0xaceec446 0x225ece3a 0xac1d4fec
-- 0xdc050fed 0x04e3ed8a 0xb303d8e9 0xe9d26aff
-- 0x0a98691d 0xf243492d 0xe3b42f00 0x6c21a97b
-- 0xa385ae98 0x14ba3f4d 0xc0215cc1 0xe1ba6c0d
-- 0x412bbbe4 0x39f95d1c 0x593bd878 0x45d3066a
-- 0x9fcee8a1 0x3f29b2fa 0xc9ae58ee 0xed6def92
-- 0x6c8f2182 0xdba64e20 0x276c2c21 0x81ea9dfe
-- 0x20ae00b2 0x8c2d2724 0x66c09f5c 0x24908e2e
-- 0xfecf8194 0x6be61e94 0xcdf5d7db 0x98b829a3
-- 0x4241ab07 0x1207ef2f 0x96e7b073 0x766293ea
-- 0x58eb0882 0xf12a6426 0x741b074b 0xbd4302cb
-- 0x909b6c4f 0x1c4949cc 0xd4d6a3e9 0x442b74b3
-- 0xbc8cb3f9 0x0efad89a 0xa2ceff3d 0xecdf86bb
-- 0x46a4a72e 0xe9d8abe4 0x94c91479 0xe99a80b9
-- 0x1072b708 0xb8318ad3 0x0685426f 0x3e89a0d8
-- 0x0b7c438e 0xb4b577d0 0x046599e2 0xd0ef85f2
-- 0x3566d2d2 0x43ade22b 0x8753a78a 0x8f6d8e02
-- 0xbdf33e56 0x8b2b6696 0x22a5e911 0xd0e0f4eb
-- 0x42729c29 0x425921fb 0x82f7634e 0x2c145fd5
-- 0xff59deeb 0x018a5372 0x33c4e11a 0xc001c097
-- 0xf250cfcf 0x2f682912 0x21f40dc0 0x883196aa
-- 0xcd5c58d0 0x7c329754 0x481c450e 0x9411c6c0
-- 0x69a9df82 0xacb01a1a 0xc0b569a7 0x0b7fd1a9
-- 0x4c339ad3 0xb0d9e211 0x07098664 0x14a5cff9
-- 0x53beae37 0x4e173257 0x4e1d2e6c 0xce981dd1
-- 0x45d6204f 0x3c193268 0x4f51ac3c 0x5ecffa12
-- 0x48068ee9 0xde12270f 0x0a0aa980 0xd6fe8ca2
-- 0x97d51da8 0xccf2db36 0xb3ad0598 0xbc56eb56
-- 0x0adf5e5e 0x9e320aa1 0x8ebb75ef 0x3973a323
-- 0x7e3d87e0 0x2c0d1858 0x83b7fa0c 0x36effdb5
-- 0xcd9eba1a 0xab5b5790 0xa48fbf00 0x536e2ae9
-- 0x2f2a3f61 0x05706a73 0xd2dfed08 0x7e4626b1
-- 0x172c6ced 0xbf2e44ba 0x15aefc2e 0x9cf56c37
-- 0x663c6695 0x04cece5f 0x4ce00027 0x465b1cd4
-- 0x333dc2c7 0xce41f1f1 0x6dd8503b 0x52b79af7
-- 0x564c81de 0x0e5e2daf 0x869753f5 0x16667889
-- 0xe1acaf08 0x38ffbb0b 0x83400589 0x5144052f
-- 0xa3819950 0xd21501c5 0x1bdadeda 0x0a874e2b
-- 0x05480284 0xe8f76f11 0x582cad8a 0x0553f942
-- 0xb6451cb9 0x76bdc86f 0x96ffe0c7 0xc630eba2
-- 0xa82ec683 0x5902ef45 0xc362248c 0x18c412a9
-- 0x1d09c103 0x2355ed98 0x5ec5c718 0x5037e359
-- 0x1508f804 0x09cfea9d 0xa16cbdfa 0x5f962b17
-- 0x85a35a27 0xa048dd30 0x6fe7ba90 0x0dc20150
-- 0xcb56daa0 0x4188fb20 0xb4182598 0xa1bc5dd7
-- 0x8c11e0bf 0x2104df35 0x025e74b8 0x79d177df
-- 0xad74bb77 0x4b2419aa 0xe374add2 0x411593d5
-- 0x796778da 0x9e43a420 0x4a2e0860 0xefb48578
-- 0x47cafbdb 0xea15924d 0x70ac1467 0xf52fd888
-- 0xd2df4bd6 0xc1fc63bb 0x119ab88e 0x0e147ead
-- 0xa85bd8b5 0xc2e61ddb 0xd566417d 0x6bb9f9ec
-- 0x69bbcf1e 0x24d46989 0x3caf067f 0x58151211
-- 0xc2a6b6e5 0xb233416f 0x3da28155 0xf9cd9385
-- 0x7a530045 0x1eab05ce 0xb86ed141 0xa8f13a5b
-- 0xf9819f81 0x66d5d5c5 0x148c1a02 0x496d3c56
-- 0x370dcd45 0x5f13f0b6 0xdd4eaeed 0x8dbad50d
-- 0x0747ce54 0x69d2adcc 0xfb69c18f 0xd44ea186
-- 0x74ab7537 0x0c642449 0x88b096cf 0x3a8ad683
-- 0x408cd7aa 0x6daa6708 0xb267b312 0xa4225c7a
-- 0x7a56dce7 0x6a8d497d 0x8837bcbb 0x6125397c
-- 0xeb51d233 0x362bdde9 0x689657f7 0x32d09e1f
-- 0x753a3d39 0xf77db5b2 0x8057908a 0xef12815d
-- 0x594fffe6 0xcf3402c5 0x1a0d4923 0xca547b2f
-- 0xaf9d604d 0x5d2e30f3 0xffe18005 0xe29bb0d9
-- 0x36fc10f9 0x3720aac6 0x37bc1ad3 0x47d000ae
-- 0xa4b0da0a 0xa178228b 0xdd9374e6 0xa1f3df5f
-- 0x9ae2e451 0x21c4aceb 0x8f9fb226 0x5190b712
-- 0x70253633 0x9c9cb5f1 0xc9178689 0x551c1a2d
-- 0x6db67cc0 0xcf1b1ade 0x48449272 0xd18634f1
-- 0x9d9c3de7 0x19025530 0x121d78d4 0xae4a39e1
-- 0x62850819 0xf3d4af6a 0xe5ad5b80 0xfa053c7d
-- 0x7ed68b9a 0xdbde2894 0x4b5c04de 0x65178203
-- 0x9181cdd8 0xb17e27b9 0x0e29b338 0x50156ab4
-- 0xf7726438 0x178108d6 0x1d8dc6b7 0xc3e7512f
-- 0x0eb8339c 0xe2684a6f 0x7668ed31 0xd0ed6eda
-- 0x4342a534 0x03840286 0xad1e6969 0xa9a6c98d
-- 0x1bf77774 0xd32fc9d8 0x405620d2 0x8ab19efc
-- 0xce4d7506 0x6f4eaae4 0x3e830dbd 0x76818782
-- 0xfde4ee8d 0x1953cd0f 0xd47be276 0xf2480bc0
-- 0xd1010013 0x2dd56a58 0x083084f4 0xc91b0ad6
-- 0xc2524e12 0xa60710f2 0x3d955047 0xce380846
-- 0x0f6dec2b 0x604d1492 0x5ca43ee1 0x6b51a626
-- 0x350d5483 0x8d99ae30 0xcba06491 0xcc0185eb
-- 0x7b64caa6 0x2f1754db 0xca0691f1 0x6219efb6
-- 0x43291db0 0x259d3f12 0xeaf6ef9f 0x5f0e065b
-- 0xad576541 0x8615a414 0x81124bdf 0x62b855a9
-- 0xabdc529f 0x01bfdf75 0x10e4c656 0xf8e86f78
-- 0x1fbe10d1 0xa6873c2c 0xdf83dcd8 0x20d35872
-- 0xf46f2861 0x22f3d642 0xfdcda29a 0x16adbdb4
-- 0x01e5844c 0x011e5454 0xf5432b04 0xd5f6a80d
-- 0xb081fab6 0x64fc2fbd 0x4ca76e0f 0x3a8d8b29
-- 0x3f03ec12 0x58e2bf6c 0x24f2b8b1 0x108e414f
-- 0xe76a02ab 0xcb525af9 0x623ba7a3 0x31412c27
-- 0x69c2f5db 0xd5546d8b 0x8200d2c9 0xf1e34a71
-- 0x393e24dd 0x2b867933 0x0596e778 0xc5112b49
-- 0xf433cdea 0xbc505e7b 0xf64bb064 0x1e892633
-- 0xbf17307b 0x9118de2c 0x6b1d61a8 0x1945519c
-- 0x32638ca4 0x5e436733 0x3dc20ff6 0x9babf127
-- 0x485c1555 0x0d0c4e2d 0xc4d5d718 0x8cfffc16
-- 0xf64050db 0xaa4ef416 0x8d398a00 0xe4a16eca
-- 0x5d9d9314 0xefa2bf1c 0x05917dd4 0xca5f1660
-- 0x59642534 0x02639b9f 0x12b895df 0xb2deaf0e
-- 0x20d8f0b9 0x04d8342c 0xa1ba5f57 0xa26cdb06
-- 0xca732ca8 0xdce0c561 0xf5e4b205 0xc05f5cfb
-- 0xba4a41a6 0xaf219d7b 0xce08df01 0xa02bbdb9
-- 0xc1adbc20 0xcb9ae4fd 0xd828cfb5 0x690b17db
-- 0xd29ae8bc 0x8fc71289 0xd6fc9cf6 0x61c7a6fc
-- 0x8e8012d5 0xd3320498 0x36e80084 0x0036d3ab
-- 0x53141aae 0x987d0cba 0x57581df5 0xace4704c
-- 0x3ce49642 0x991556c1 0x6cb0b984 0xac15e528
-- 0xe7d208ca 0x2486d1c5 0x93b6623e 0x340b7622
-- 0xe7e1cf7b 0x3cdeed88 0xa23c849a 0xcc6e8b3b
-- 0x292add5a 0x17763ee1 0x9f87203e 0x72cf4551
-- 0x2053e66f 0x06c3a411 0xb61c2e0c 0xa4a7f3ae
-- 0x0ff87dbb 0x03999ed8 0x48aacedc 0x2e126ef3
-- 0x799441bb 0xaee15b4d 0xea08bf54 0x47248787
-- 0xb60afc11 0x8c3d6a20 0x7c04f801 0xb902760e
-- 0x319040eb 0x370bbd5d 0x9a1dd5e6 0x63f7da1d
-- 0xb3784eac 0x3b304dea 0x987ada9f 0x2b6b1cda
-- 0xf9241003 0x0d3d16f2 0x1185dcbf 0x519b7a5f
-- 0xeb612361 0x28b57da5 0xdeb8419a 0x0ba13122
-- 0x062e28fa 0x5ffb9b36 0xb1258247 0x8337401f
-- 0xed1f6423 0x730cafe6 0xf728c690 0xe40557eb
-- 0xc4951a15 0x04a988a9 0xbf5fe18c 0x2766e40a
-- 0xe4d74d13 0x8638d052 0x8eefeaf2 0x9ad07978
-- 0x32042a87 0x4385f38d 0xc9b48f02 0x02ab0ae7
-- 0x9eaeb632 0xf386c14d 0x8b1c2ab2 0xad432a24
-- 0xfc5bd462 0x2d7ac5fe 0x45dff5c6 0xa235e1a6
-- 0x825b770c 0x5568471b 0xa7ac3a3a 0xfcc6e40c
-- 0x0c1be59c 0x77685a3c 0x5b1bafbd 0x40b8a139
-- 0x3dd1bf01 0xb6651001 0xf2915a6a 0x16fe1cf2
-- 0xe78467d1 0x4bec9fb1 0x88615320 0xa3920831
-- 0xed4afac7 0x206cffba 0x96c42567 0xcc2b5215
-- 0x7ca0193f 0x0e1a60e5 0xf3892c10 0x2ceee7b2
-- 0x110d3311 0x9a322e7e 0x3cb7e5fc 0x3fb971c1
-- 0x59971332 0x08386001 0xe4a2444d 0x17d9c47f
-- 0x9f53c4a5 0xdb54e5c2 0xfaac9f08 0x975c07c6
-- 0x8a6e6bcd 0x4392053a 0x6473bef8 0x4b3b91a3
-- 0xfb7e8ebc 0x46c6ffed 0x04939839 0x71b93766
-- 0x47e4f74a 0x786545c8 0x77f55b59 0xdf8e992d
-- 0x60a0d2a5 0x6cc8a5cb 0x113ee95c 0xa378558d
-- 0x5d3b8bd9 0x3c95b2a8 0x6efa3682 0x9535dd34
-- 0x3e29974d 0xa477d069 0x2dbf58d2 0x165edae3
-- 0xea25d53d 0x44e3ef71 0xba6341cf 0xc61b964c
-- 0x4612838b 0x62151b9e 0xc1de2511 0xa364130c
-- 0xa9710643 0x1a436c70 0x97030b09 0x5cef28e0
-- 0xd5197e49 0x02b9ffa8 0x1b52dc7b 0x04f9428b
-- 0x01ebed2a 0x1eaecbee 0xc53c4d54 0x3e34c125
-- 0x05b4f37a 0x6e3d042b 0xf1c1f40d 0x39cfe9e1
-- 0xd2938e89 0xa14b9846 0xb1333676 0x31068254
-- 0x4b627e4b 0xb5185882 0x101b52bc 0x73e05abf
-- 0x68a4e24c 0x67e301f4 0x6bf8b538 0xc502e1e1
-- 0xc3889b5b 0xdfbc6d96 0x4239d0e1 0xbf3667ab
-- 0xb0c4cb00 0x3efdcffd 0x7cd9661d 0x4f5eca03
-- 0x0ef218dd 0x464f0826 0x048fc539 0x6a1c63fe
-- 0x76cc341a 0x1ae2945c 0x7a339006 0x858fdc20
-- 0x2a4a7270 0xd4cbe12c 0x7b27e5d8 0x998cf520
-- 0x4795ccf7 0x52e15388 0x86aa7b96 0xff1845fa
-- 0xd49d1061 0x035b6a80 0x1df18220 0x28fc4fd1
-- 0xa8e8f333 0x3a9240a6 0x41a4caca 0xee736b6f
-- 0xdfa7ce4b 0xd4bf5c0c 0x4e62f6d3 0xe98ae9b4
-- 0x7f544550 0x2b0706df 0x8fb2e752 0x546af9d1
-- 0x8517758f 0x53f522fc 0x03bd1819 0x6fd264e2
-- 0x16839ef8 0x44a1200d 0xcd5a586b 0x1ead251c
-- 0xf58dd3be 0x80217ce7 0x0367ff42 0x2d8f2ce8
-- 0xe8a0a689 0xba33e366 0x5dc7980d 0x005c0eaf
-- 0xc0c44118 0x5553076a 0xdaf39389 0x703e09eb
-- 0xc54c8112 0x4a26135c 0x36a46f2b 0xdc93ee12
-- 0x7060db72 0x7778befc 0xe028fc55 0x52e86278
-- 0xd0b00188 0x6ed5565a 0xb5e2785c 0x3608bffa
-- 0x55c3f5a3 0xe1e41afa 0x08a227fe 0x94c793ce
-- 0x650934f7 0xddc36524 0x6dac40de 0x9eec3ceb
-- 0x8fe3d1cc 0x3cebab86 0x61e4d63a 0x5382ea11
-- 0xa90c9495 0x0277ccb3 0x412cecc1 0x5853c945
-- 0x97df9a48 0x364d9b10 0x7e8c9bf1 0x6b4974ef
-- 0xd3dbaeeb 0x6626dd26 0x2b746d2c 0xfb762155
-- 0xf942f687 0x1317d1b5 0x0c989def 0x5f4c0ed6
-- 0x31aebbd3 0x51cd8d5b 0x3d729511 0xc07c8f23
-- 0xa7f3e6f7 0x7683dba9 0x5f051d5c 0x750437f5
-- 0x1b9ffe98 0xa4de609b 0x4c498e9a 0x18dfc535
-- 0x376c6c34 0x19a57039 0xa70e93eb 0x7e966bc7
-- 0xb6e9d77a 0x3ab98e5f 0x1607125e 0xe8845aa3
-- 0xa20a2d80 0xb17ac63b 0xa07a9790 0x71e5a14f
-- 0xb6b5fc78 0x4c610f86 0xb57b21b6 0x1bcfb3ac
-- 0xbf812998 0xd429986b 0x02b837e9 0x0823aca8
-- 0xd8a85194 0x708bad39 0xff94ef19 0xc3599461
-- 0xaee622f6 0xa8b5a808 0xf801b298 0x0aeb35b7
-- 0x4db4bf27 0xfa31c205 0xa047dc66 0x7e0ae406
-- 0x2ceea6cb 0xef0ef96f 0x4cc4fdba 0x6161256f
-- 0x94505fd1 0xbced5596 0xbf9e36a5 0x271e68bd
-- 0x7a3308b6 0xef1af50d 0xb55ede06 0x6783e602
-- 0x1152acf0 0xdc644ccd 0x1b692da3 0x59f6886b
-- 0xd7236158 0xe39d75a6 0xe7026697 0x25496283
-- 0xb6b0a61c 0x09d0931c 0xe8d459a1 0x1a124097
-- 0x88e50621 0xf2ed18ff 0x37681783 0x4afa1ffc
-- 0x8a96ec4a 0x4474a860 0x274591b1 0x59df3968
-- 0x34f56fb9 0xce821f96 0x7ec825b2 0x6ed4a9bf
-- 0x687253cf 0xa511c1d3 0xaf2bd6f0 0xd1ce1a5c
-- 0x241dd505 0x39037238 0x0c761934 0x53181db5
-- 0x11ad47ec 0x915a527b 0x748bc970 0xeb8f2669
-- 0xb8bfd5af 0xd8d19145 0x0361ff58 0x6dc6e2f2
-- 0x1fd06556 0x120db4c5 0xbd704c8b 0x70a1a57c
-- 0x27543851 0x095403a6 0x28171887 0x640e7c92
-- 0xb48fd7d1 0x62ad2774 0x224767cd 0x347b8843
-- 0x821ca7f3 0xf94749c6 0x2bc7f40f 0x700cc1d8
-- 0x50d50832 0xc2f9465c 0xa6e1cbaa 0xe0f5e934
-- 0x7f33617f 0x8876cb07 0x408c24fe 0xc0cfcdf7
-- 0x39152b72 0xa0ba80ab 0x301a73eb 0x6e704f6c
-- 0x3b73c24b 0xd433f861 0x43192007 0xa56d2ca4
-- 0x2d28bd5d 0x14f4c9cd 0xb7fe189c 0x031e1818
-- 0xf8f4133e 0xdc8e7727 0x4f8f5a06 0xe7b114cd
-- 0x5cb9ff12 0xdb4c5a53 0xed956df5 0xf3634f5f
-- 0x6cce1cc2 0x5393f9ac 0x1184c2f7 0x0b6fd240
-- 0x64771374 0xaafed1a1 0xbdc55bcf 0x976414ef
-- 0x6a333e56 0x0c5cefb2 0xff2574e0 0x11b059ef
-- 0xff8b7f2a 0x9651e97b 0x594fe89b 0x7be60f6a
-- 0x7b7695ac 0x612036f7 0x5be0d4fa 0x25855737
-- 0x12e32ee2 0x8e86130f 0x46d75d41 0x3769d438
-- 0xd14752d4 0x1612ad6d 0x8f86f2a0 0x63e01251
-- 0x9a44ac4a 0x49fdb148 0xe1757062 0x42798804
-- 0xf21f46c1 0xed0a3794 0x5528add4 0xeddc0c90
-- 0x7f188ce8 0x59568b7a 0x8e25d50f 0x9277c492
-- 0x955c6e6a 0x79f94a59 0x3a65fb08 0xceb23267
-- 0x7d8dce01 0xd15c492d 0xa35f005c 0x0e7cba9a
-- 0x950485d9 0x2d92e448 0x4aced016 0x0d10136d
-- 0x3d2ec365 0xd982e881 0xe81940d2 0xb1a84849
-- 0xdb30d967 0x9f51d3d4 0x4fbe18a9 0xef21cd28
-- 0x5d3cba6c 0xaa89b02b 0xbe1e9526 0xa20a918e
-- 0x0c26bd72 0x8372eff8 0xcf7ab414 0x1d3ab83f
-- 0xfd2c8f79 0x4929f77e 0x2416e8df 0x65dcaaca
-- 0x58fbf7b3 0x1c4a3089 0x9bfb6e26 0xc7338ac9
-- 0x88e5ad26 0xc62bb3d4 0xad6d36f5 0x6445167d
-- 0xe9de8daf 0xc391c6bc 0xa78b4558 0x0216bcdd
-- 0xbd4365b9 0xb0a874b2 0xe95e9453 0x77296b9a
-- 0x49803c1e 0xc01fd0ed 0x165a9d5d 0xf7da6442
-- 0x4c00818d 0xaad5bfca 0xdb252937 0x0e4e0f74
-- 0x0c2738e8 0xd075b8ba 0xe3b2df11 0x8aee60a4
-- 0x36052cd8 0xb4aa190b 0x413e7155 0x3e7e646d
-- 0x807e6eea 0x97993e6f 0xa5129ff5 0x98e01bca
-- 0xa8bd70c9 0x8800721e 0xb3407ffa 0x266b2f99
-- 0xd9da73ee 0xa06f634a 0xcaae53b1 0xd98e53c6
-- 0x49368291 0xc89485fe 0x938a8a29 0xb57f77cc
-- 0x58c867de 0xcdac8a84 0xf4d57b6f 0xc6daf080
-- 0xe3d9c67f 0x0264b194 0xc3b2ca50 0x6d214667
-- 0x88503872 0x549ed8cf 0xe827689f 0xcbe94e2e
-- 0x4a02516d 0x24ddcfa1 0x3cbc736e 0x34c88707
-- 0x9f4c9376 0x4ced4d41 0xfdbabfb5 0xafd291d9
-- 0x2fa602a3 0x53e19d9c 0x44422427 0xf85e2c53
-- 0x40e91ef7 0x02646045 0x3d1fa703 0x1613b99f
-- 0xa108de10 0xf9cb3d04 0x7b9f9523 0x007d74b1
-- 0x961771dc 0x2e49fe1b 0x5fefe27d 0x54737b43
-- 0xa11d7c40 0x7f0cc2d9 0x67c6533e 0xd1ab10fa
-- 0xb1950645 0x536087d2 0xd6937b40 0xc35960c1
-- 0x2df0c356 0xecb5ab53 0x61e08998 0x1671bdd0
-- 0xd72935b5 0xdf1a9d7c 0x70b1aa4e 0xa9272818
-- 0x1f7b8d55 0xc7292a0f 0xda7af847 0x190076ad
-- 0x58370ba6 0x3020fb4e 0xff8a4b30 0x13818958
-- 0x6ba1ca38 0x6a90d39b 0x5e180929 0x206e8a22
-- 0x0568f241 0x5f83ad21 0xef05e5c6 0x21d0521c
-- 0xe7886eff 0x68eebbce 0x550c1659 0xa0843444
-- 0x19468c2b 0x539cb9b8 0xa4b18b62 0xdab0680e
-- 0x1b254dbc 0x47068aaf 0xa8193743 0x44b60b88
-- 0x90c07337 0x2e55666a 0x632f4b23 0x68af10db
-- 0x8e29f54b 0x5f436bcd 0x8bf81d55 0xb640ccc5
-- 0x2e4ab6a9 0x198697a5 0x8a1c8481 0x572fb679
-- 0x7597c416 0x608fd45e 0x57c8c7f4 0xe151d349
-- 0xed9e17bb 0xa66f2816 0x8175fe68 0xd57d91ad
-- 0x79df0711 0x7a349868 0x13403cd4 0x7d974c60
-- 0x8860ce70 0x2e6d62ea 0x8916e2f2 0x0e336838
-- 0xf54d382d 0xc4e172c8 0x94bfcfbf 0x5fa53172
-- 0x2933cecd 0x4d5b8439 0x0ca0e6e4 0x8ef87b00
-- 0x2fdd121c 0x24beae76 0xa85b47f4 0x4e38af2e
-- 0x12b8734a 0xf698abf4 0xde2c2d93 0xeb100795
-- 0x8ab19df8 0x93a6f4d1 0x43c4b2cb 0xbaff7c4a
-- 0xf52b1471 0x72804f4f 0x0c0ca257 0x1dc24c77
-- 0xbad7203b 0x3a998fa0 0x9cb20388 0x7ef1fb3b
-- 0xbae66020 0x9a22144f 0x39ac47db 0x3f145996
-- 0x05a32b6c 0xd201a2ec 0xd868727f 0x08b2df4f
-- 0x4583bbfa 0x9a422baa 0xa6a2e8f5 0x236310ec
-- 0x5aafc3cf 0x344156a6 0x6f964ceb 0xed0495ae
-- 0xb5638c98 0x2c8e84ba 0x63d8c7a5 0xec956b66
-- 0x69c54f32 0x767874ec 0xe8fb6ce1 0x68b1c780
-- 0xe4b861e4 0x2787cc38 0x4b2202e7 0x23b476be
-- 0xecdf296f 0x094aa000 0xe95ef073 0x4182ebb5
-- 0x30daa31a 0xef68cb68 0x2fbcf6bc 0x21c52620
-- 0x19abf83e 0x4de7528c 0x05fe4c05 0x32c2a1e9
-- 0x8c23abdb 0xabba9a90 0xa6a215c1 0x891f915c
-- 0x667cd65a 0xaa5a9b2c 0x689fd1e9 0x42b52c95
-- 0xd9872e76 0x05dd5278 0xc19798f7 0x8d031d86
-- 0x25690670 0x165f4b19 0x76b51d6f 0x61cd8232
-- 0x7b530271 0xa8e9326c 0xd952e94d 0x56a7021b
-- 0x128be860 0x4da40144 0xeb4ac3d5 0x82b7ff5a
-- 0xea2abda7 0x690a9ebc 0x33562378 0x6bc91b2f
-- 0x46134185 0x8fb77fb2 0x029518a2 0xe1fa1f4c
-- 0xf78783b9 0x5d8ebe63 0x103e8050 0x924085bf
-- 0x80593f2e 0x5be4bcb6 0xcb935edd 0x882d0a5f
-- 0x7deb8205 0xcdc0fe2e 0x9c333db4 0x1d0c888d
-- 0xf8dc3575 0x2f901125 0x6bf48cdb 0x98ab6fb4
-- 0x491d7df2 0xa064922e 0xbbb86c70 0x88aad77d
-- 0xfcff0669 0xb0c47c1c 0x0fcc6fe1 0x50df8a83
-- 0x014460e4 0xb014e6ab 0xbeff4bc5 0x8d939fae
-- 0xd750ae17 0x42dd29c9 0xdb1cbf70 0x82265be9
-- 0xd11afd6a 0x21834e1c 0xd11e3c3a 0xbe568139
-- 0x6cf92d50 0x9304ebf1 0xf177046b 0xa5b127a5
-- 0xfb57e4a7 0xf94291df 0x0f089d58 0x07395b5f
-- 0xde4ba5b9 0xf7371fc5 0xae44f190 0xd529271d
-- 0xbcaea246 0xfa777c0b 0xad3bab9f 0x0d6251ec
-- 0x6f4fa894 0xc39273e2 0x7710fcc3 0x81f08a5d
-- 0x395b54ee 0x87295638 0x57398bb0 0xfd46c7c9
-- 0x3f1dafc6 0x548479b7 0x37c42fba 0xa2130147
-- 0x99dc0bb0 0x3596c5cf 0xbcca6bec 0x418735ed
-- 0xfcd4273d 0xee141135 0x8457cf47 0x95fe7220
-- 0x041aaf8a 0x6e947153 0xc963afa7 0x09390a74
-- 0xc40dffd3 0x4208039c 0x319b1f84 0x42b6b3b7
-- 0xade789da 0x83338c91 0xf2d74712 0xe80011dd
-- 0xdd61645e 0x286fc63a 0x26e2fb23 0xfef2b4ea
-- 0x3290efb8 0x595a0c17 0x6cd9bea9 0x7be1338e
-- 0xe0ff2c09 0x1b93aea5 0xbbd97e91 0x5e1ae1e7
-- 0x7c6c078b 0x0b9b3a03 0x43d38011 0x824cd94b
-- 0x9725170d 0x87ce6f33 0x60525d85 0xc0a5e853
-- 0x242e613b 0xebf72857 0xcb500fc6 0x0de5c3f0
-- 0x382b625d 0x08840e50 0xcef30663 0x1bc848b6
-- 0xefa78141 0x81b860d6 0x4eb125fe 0x7e125296
-- 0x276a5558 0x45caa775 0x7c6ec23c 0x5dcddd08
-- 0xc41aa32d 0x6a2851b1 0xb69ae1c1 0x8f603c43
-- 0x763497f2 0x73344cbd 0xcffd175c 0xfccf5a91
-- 0xb2318bf7 0x66ac628f 0xa98fa975 0xb68e5426
-- 0x27555715 0x5157a93f 0x666fd404 0xb37fcc40
-- 0x563b0512 0xb70f8446 0xe10d257f 0x73793ef2
-- 0x31a84915 0xe0de9489 0x08dfa368 0x9169d4fd
-- 0xc14f5c9a 0x92e6db4f 0xa30b6cec 0xca04670e
-- 0x8a664367 0xe8984e70 0x1c96a39c 0x655f9abd
-- 0x6999a190 0x76267621 0x0f49f963 0x8ddad3a1
-- 0x51fdab6a 0xaf0d6863 0x23b71bdb 0x32818c8a
-- 0x6398044d 0x26c60bec 0xb0b631fa 0x938f69c7
-- 0x52f11913 0x1e6fbe7a 0x92dcd409 0x419bfeae
-- 0xb147bb96 0xbac5bf9d 0x08de155a 0xde8ca968
-- 0x20aef902 0x62df25a8 0x64a4042f 0xef19da4e
-- 0xc75fd112 0xc9863e47 0xaccfdbcb 0xd29b6090
-- 0x6dc67b4a 0xa84b3cd6 0x45a0e708 0xd28673bd
-- 0x00bebebe 0xd5e518d7 0xc63d647c 0xa28f5f6d
-- 0x3372edc8 0xa1c44ed1 0x88e61d44 0x5e095835
-- 0x2d8713ce 0x6791a885 0xae89c04a 0xf1dc5105
-- 0x6423f3b7 0xf4e2f384 0x2d2761a7 0x38ea905d
-- 0xa263d776 0xd1936fa6 0x2fc54081 0x429a25c2
-- 0x13f6c5df 0xffffa6c1 0xfaf82002 0xe4bbb103
-- 0x2fc0c622 0x669ee281 0xec785fda 0x91156b25
-- 0xa9f4444e 0x354fdfc2 0x7c5f5069 0x72ae591b
-- 0x73bfd64e 0x6b96d744 0xf261daaa 0x2de15dae
-- 0xedaba9c2 0xf287b3fd 0x8b2097b6 0x589934c0
-- 0x7edc2a73 0x469b16eb 0x247b9a22 0x8b7e6c7b
-- 0x3e71ffe2 0x5275f242 0x032a211f 0x977bff60
-- 0x4306ad03 0x6a212383 0xceb36448 0xa2a79209
-- 0xe3842f42 0xcee0cbe7 0x37cdb626 0x29a0a515
-- 0x2857ead6 0x981d5d9b 0xf0ff9b06 0x95de8cad
-- 0x4dcb565b 0x065d585d 0xe7eb754b 0x278fa774
-- 0xe4d8fb7a 0xe152f018 0xfb7bb25e 0x50323b64
-- 0xba618e43 0xf8cb1c61 0x1b6dce25 0xb4fc7867
-- 0x2a7fb213 0xea9e646e 0x3f9b735b 0x5640315d
-- 0x0793ba5b 0x71ff31fb 0x4b41f1d6 0xb1538146
-- 0x336f4272 0xf176d509 0xb7fc03c5 0xd6a1c927
-- 0x56a68c10 0x8b4740cd 0x14c54f8a 0xf07ad8a9
-- 0xa8403db8 0x37c23f2b 0xdca69aba 0x4b39ef9d
-- 0x2af13bdb 0x6baace1f 0x8c7ca0d2 0xba86bd02
-- 0x2a74681c 0x5542ae58 0xc36709e2 0x82b34568
-- 0x26ea06be 0xd4bf458c 0xde209de7 0xa311b4e5
-- 0xdc00e139 0x7d305958 0xc5d76ed7 0x0943a285
-- 0x48ce4e29 0xe371bd9a 0xfe6a6501 0x4167d215
-- 0x402e47ba 0x588458be 0xbf4bcf37 0xf7fa27a8
-- 0xb725f91a 0xc17f5c07 0xce771dbe 0x66f9d592
-- 0xe8521ed4 0x42f75171 0x343b3e74 0x2d5448b5
-- 0x2d1fca8c 0xd7a32431 0xc29a88d2 0xffb07fd7
-- 0xcca0333f 0x43204f2f 0x866c1867 0xcb215814
-- 0xfcb67d4f 0x423680be 0xdf22f6d6 0x03373eda
-- 0x3bd202e3 0xd8972fe3 0xb7733d70 0x7a472c76
-- 0x6cc8a627 0x3b27e643 0xa3475f3f 0x87ffb286
-- 0xf823d69f 0x6d57c38e 0xa0fd464e 0x53e2e341
-- 0xaaab23ef 0x439429ef 0x55ba2a2b 0x4da5ea4c
-- 0xc1fe05fc 0x874b7a34 0x9a875956 0x713ccc90
-- 0x49afcff2 0x5905dc0b 0x1f5dddb7 0x8ef5c1d9
-- 0xf60eca50 0x25172569 0x3525639a 0x25804bbe
-- 0x5729cd49 0x17f84e66 0xc540d86d 0x51524bc9
-- 0x9a6e9901 0xf5bcc70e 0xf7a73ffd 0x54509c8f
-- 0xec58b8a4 0x9993703b 0x6ef45fc4 0x5ce3a507
-- 0x1d73c611 0x8780e8ff 0xc7d2e02b 0x0bc825f2
-- 0x02f75fca 0xe80c0758 0x24646fe9 0xd378ff5a
-- 0x592c5619 0x6c80372e 0x1f7351d1 0x4db5182d
-- 0x3985fdfb 0x16ca9158 0x58ee1ae4 0xaf2b9fa0
-- 0xe97f60ce 0xbb911e68 0x01748fa0 0xaef578d3
-- 0xc3736418 0x8ab0deb5 0x0de16af1 0xb8369f7b
-- 0x68e43c12 0x914ca0f6 0xe950ef28 0x834eff90
-- 0x51adb952 0xc42ee4ce 0xf70ab4a5 0xbf9fc916
-- 0xed9444b1 0x845a6a1e 0xf92e7b64 0xb9ca8a1b
-- 0xa9cdfcd0 0xb5956bc8 0xb8520e59 0xdde7aa57
-- 0xb41d390f 0x364aef3c 0xf39d4482 0x8b4e651e
-- 0x0b82f5fb 0x7960e81c 0x12ed7b84 0xe9f123ca
-- 0x88a64db2 0xa0c714cb 0x57b01471 0x80ff31a6
-- 0x7571d8cd 0x857035d9 0x0508587c 0x594a4a42
-- 0x011503e5 0x27c75e55 0x03264f62 0x9316ed1d
-- 0x36e5cd1e 0xfa9b23b4 0x5bc8c606 0x0902bd38
-- 0xd6745c69 0x6fa73118 0xa50f7b94 0xc529e962
-- 0x28738486 0x7b85a599 0x2c495a35 0x85f2cbef
-- 0xa09dfe51 0x1c763ab2 0x4effdb5c 0x506586f0
-- 0xec182a58 0x45293146 0xaf8d78b8 0xa89bd228
-- 0xec24826a 0x752cc421 0xbf36aa46 0x6760e225
-- 0xe15d0987 0x6fa9bdf3 0x6837c755 0x9426d654
-- 0x14b48f5b 0x5d70567d 0x63a14f92 0x809d5361
-- 0x3b6e2729 0x84ce5415 0x7eaca6e0 0x9b467302
-- 0x8f39d484 0x8e78398c 0x33108b33 0xdc07005c
-- 0xbdc2500f 0x35f1f452 0x9d254e3d 0xfa61eb21
-- 0x2ab6c7aa 0x83561fdc 0x8735d598 0x416e8591
-- 0xfe10e93a 0x18da409d 0xab6d0bfd 0x675baaf1
-- 0x287fdd24 0x6b50b63c 0x8c08abca 0x871a59c9
-- 0x41bb2ae4 0xfba9abdf 0xb46491c7 0x4e433d5a
-- 0x01e4fbda 0x0bc40399 0x3bdb61c2 0x3cf051ba
-- 0x910daa46 0x8d4065d6 0x270667eb 0xf6d42459
-- 0x01993a1b 0x00a95dda 0x6ed5a693 0xed4fbf7b
-- 0x24dbb70f 0x67fd62ee 0xcef5f0a4 0x9e65b798
-- 0x9a9913fd 0x3d0e7190 0x4265b4e4 0x80bfc46f
-- 0x6b354d2c 0x2b90a987 0xc989cb75 0x773e6b64
-- 0x55325e9f 0x18816a56 0x07413406 0x5177ae31
-- 0x24a19ef7 0xdac405a4 0xdca2d3b4 0xab7c7b70
-- 0x42b5de0e 0xfcf918a5 0xa54d934b 0xcaa9eab6
-- 0x50e63e2a 0x4b168926 0xb2442913 0x594c0f94
-- 0xf387f31f 0x4d716749 0xc8433297 0x34c1a5de
-- 0xe929008e 0x5644251b 0x736476d0 0x0d00aee7
-- 0xf20b2f64 0x5e158173 0x9af3e568 0x5f19fa7e
-- 0xb23b2861 0x8659ee6e 0x94058a64 0x66ec4fb1
-- 0x37cd6a4a 0xbd2944fe 0x0ea44ec6 0xe7d64c24
-- 0x75a170e3 0xb4a9479c 0x2215716a 0x64a8a574
-- 0x257e86ab 0x86bae993 0x3030352b 0x15cb88bc
-- 0x576363a0 0x61138c36 0x7cc4fe7f 0x648977a8
-- 0x0ef71fec 0x1c60df47 0xc75f70ea 0x88509798
-- 0x172b407a 0xf888e400 0xef33cd15 0x5976757d
-- 0xf8cfef13 0xbf024380 0xbb9c1b02 0xe4c38ec9
-- 0xf30fce01 0x8efa5213 0xf4b48aad 0xc94c3a37
-- 0xeb1bcece 0x09a18b56 0x4e83c0d3 0x6fcf9f77
-- 0xf52f4d76 0xf3368a12 0x33b2797f 0x627b6e41
-- 0xefd05154 0xa83ae2a0 0xea211129 0xd25723d5
-- 0x7bbb0e3b 0x7131f088 0x5dd5193f 0xef5aa905
-- 0x39f77be7 0xa21b48c1 0x1ded01c1 0x5cf98c5f
-- 0x6e23d207 0xd7e7dadf 0x5932ed1a 0x2a729061
-- 0x29a89f4a 0xac0e8447 0x01ff4205 0x8b1456c6
-- 0x3fba0156 0x658c03f7 0x5c69f968 0xf6570582
-- 0x21bb0145 0x8683bf5b 0xa4b6eba5 0x4ccfe5cb
-- 0xd202898c 0xbd2411cc 0xc2fc702a 0x5c39b695
-- 0x87584ccf 0xeae3c735 0xc472b6f9 0x4249f637
-- 0x3fa89c0e 0xce5a8bd7 0xbb28138b 0xc080ecb1
-- 0x9cbf1916 0xd70424e9 0x75cc4ed1 0xa575f3e9
-- 0x1c571f68 0xe2906205 0xc26520cf 0xf9c1fc8e
-- 0x61c982de 0x1af6cfcc 0xaf397c9a 0x46830771
-- 0x623d98bb 0xda7b52fa 0x5a3c57d3 0xfa35d2f0
-- 0x4783df19 0x6ad07325 0x487406f4 0x3fae5152
-- 0x189137cb 0xd98a644e 0x17ffe880 0xeb6aa9f7
-- 0x67184e3e 0xe475734b 0x0f1113c2 0x39a4df47
-- 0xbf8f6ec9 0xe13a4d8b 0x63ec02f5 0xdfe7d75d
-- 0x1379034c 0x5db7314a 0xa9d9ad3e 0xfaaed8f2
-- 0xf0fb6074 0x12f27b84 0xc97a92bb 0xae5e3bb7
-- 0x5f7fc2bf 0x00cbc1f7 0x9360a4d9 0x3632ba04
-- 0xad044c83 0xeda13ec1 0x34a214c0 0xcf9c972a
-- 0x96352243 0xf1a35357 0x2d77bc30 0x8485bbad
-- 0x67fbaa99 0x8035b1a5 0x8ca763c0 0x109d7887
-- 0xa1c35cd8 0xdc79e308 0x4495404d 0x64419226
-- 0xacdcea08 0x9545c0ef 0x5493e09e 0x7fe16336
-- 0x41381aa2 0x5c344f46 0xb40cab9f 0xc43951c4
-- 0xd86e52a5 0xb141d934 0xd78efcff 0xf37ec320
-- 0xc184a45b 0xf4a57954 0xc8aed0bd 0xe602c15a
-- 0x71a6b48b 0xce837428 0x02733706 0xc4a4a044
-- 0xa75efb97 0xcb63d62e 0xd0580b5a 0xce499087
-- 0xc12bf4ca 0x9c995345 0x1d8adfbc 0xe62fd60e
-- 0xccbf5412 0x6161f8d0 0x64268e34 0x565d066b
-- 0x1896b63f 0x838f8f2a 0x1e314a00 0xac470276
-- 0x1879cfdf 0x4702d7f9 0x83b4d777 0x81fcb068
-- 0x1b6da94d 0xd075ed01 0x3c7734e8 0x56389a0b
-- 0x0743b9cd 0xb6b0bf0d 0x63107ab9 0x193172bc
-- 0xc7b84c8e 0x982ce2aa 0xb8e387a6 0xc264a4b0
-- 0x2ac6c802 0xb89ea335 0x052332a4 0x49932ecc
-- 0xb940f808 0xa7a09330 0x19f3f49d 0x7aef6b5a
-- 0x201d8ed0 0xf29aac4b 0x8ae2ac0f 0x998c1ca7
-- 0x665c3927 0xab4ef641 0xf136710d 0x9644ee9b
-- 0x34efae96 0x4c596035 0x8cfe8b3b 0x5d9f742e
-- 0xab2c63ca 0x017d864d 0xd0604d6e 0xab24eee0
-- 0x75916a9a 0xad0d1167 0xbeb47775 0x6ac822d1
-- 0x776907aa 0x9e9377f2 0x438c5d81 0xd70e9964
-- 0x1c09c914 0xab90e5cf 0x31cee523 0x26ba6ea7
-- 0xef00781d 0x622b886d 0x36a54031 0x88b1221c
-- 0x666333f5 0x60e1c93e 0x5e4d0e0a 0x3ee6ff69
-- 0xceb4c76b 0xa5deb4f8 0x0668ced8 0x30225378
-- 0x6697cf37 0xc5d9661d 0x089eab85 0x7684a876
-- 0x018a81af 0x221a7fb2 0x31d80de0 0x9f18ae90
-- 0xa29c9af0 0xc3e2b00f 0xda0edbab 0x7ee9cd2a
-- 0x3ab0f88e 0x02c58228 0x606fa7aa 0x7776cb0a
-- 0x4e8ad99c 0x3b527469 0x58123d62 0x4ce428d2
-- 0xee91a210 0x466ba2cc 0x043c57b9 0xaf7bdd43
-- 0x98e76fee 0x8f3eac1b 0x00dffd6c 0x6fcb1c6a
-- 0x5cb90573 0x485d4505 0x0df5418a 0x26eafe35
-- 0x0faddf3e 0x4e972930 0xe113c823 0xe45944d1
-- 0xa646077f 0xc1708ae5 0x6ba07c20 0xc7e4e234
-- 0xc6754ed5 0xbd6e85aa 0x8cc1756e 0x02afda29
-- 0x72809597 0x75b6f5a1 0x61141874 0x1774047f
-- 0x7a10afed 0xfac2c4ad 0x42cf5c99 0x24f0350e
-- 0x042f2864 0xfab55b67 0xc8ead5bc 0x914e9512
-- 0x77c8ef6b 0x8369aeb1 0x71bc947f 0x0c6b49d8
-- 0x8ddd0513 0x028ad10d 0x99a1b28f 0xe6cfbdc8
-- 0x7978b4a6 0x3ebbade8 0x9985f5cf 0x431f42f1
-- 0x004372b2 0x18b67f68 0x20111c21 0xbb6f77ff
-- 0x1783b030 0xa045d7d1 0x0e9c7e09 0x3ccbd95f
-- 0x0b84a2ed 0xf0ee3325 0x63f2e126 0x5ec4c67b
-- 0x2ca782cc 0xcaf20d04 0x8b59d515 0x3212aa33
-- 0x335ca0c3 0x6f9e0cdd 0x4d4bf189 0x44d2fa0c
-- 0x5abe9396 0x492794ee 0x10dcfcb1 0x9acda9bd
-- 0xe8aa2803 0x3f1b9605 0x3e2ecb5a 0x971bfa8a
-- 0xcbf141d2 0x0afafe10 0x2fc906a6 0xefad20c0
-- 0x9e922581 0xe69142cc 0xc9c0ba82 0xc069e640
-- 0xb99c08b6 0x4b62ca1f 0xf3c5767a 0x6ab088c7
-- 0x8f0f0c0b 0x6726f64a 0x9711a3cd 0x46462571
-- 0x3a58350e 0xa2561911 0xe24dfdfe 0x97443fdc
-- 0xf80540be 0x069978bf 0xb38a359b 0x8e574f62
-- 0x69aea75c 0xdc753fcb 0x2a74002c 0xced027b4
-- 0xda993254 0x03409b83 0xf827331d 0x75fb3271
-- 0x01ad839d 0x68520842 0xca65c45c 0x1a3db5a0
-- 0x91d37dd3 0x6168c0fb 0x935f5a08 0x002007c3
-- 0x42eb4760 0xdab3a804 0x72a6297e 0x905c32d9
-- 0x81abcfa9 0x1b21d04a 0x5a1289ae 0x424e7183
-- 0xc207906c 0x31fe9134 0x5eb2e5af 0xc9253fc7
-- 0xc32be24f 0xe5474cbd 0xeff6e1b0 0x710e5e69
-- 0xe6c4c538 0x96b5f1de 0x2abc9c35 0xddbd1a92
-- 0x8aca40d7 0xe359c238 0x954718f4 0x18b157e5
-- 0xeeed790e 0x6948a963 0x24e70bfb 0x4d681547
-- 0xf68369a7 0x5b54409a 0x1f0b787a 0xc2610047
-- 0x0f8bd269 0xd7c8c154 0x9dee62d9 0xd4738ed8
-- 0x1a66c6b1 0x5bad5a5b 0xb110311a 0xfaec6802
-- 0x6b750f2d 0xcbf8d0e0 0x11edaf4b 0xf64a07bb
-- 0x422e7c15 0xb1732663 0x1ff404f0 0x2d5052b0
-- 0x6e45356c 0x7e2201e8 0x7c5ebcd1 0x1cb4425a
-- 0xb1539a64 0xa2e4459f 0xcf1ade8a 0xfc476473
-- 0xf4147deb 0x2afbdd77 0xff01fabc 0x6597408a
-- 0x0951220b 0x6750f3ec 0x0a242763 0xf3d71c05
-- 0x84cb1c26 0xdb7a81bd 0x7aea1a5d 0x7e719a48
-- 0xc5c12fe1 0x0ce2e988 0x29ecc6f0 0x5ede901a
-- 0xda8399b1 0x31c05d6b 0xe1956aff 0x59ed7c3d
-- 0x60832637 0x9bcb7cac 0x63c530d1 0x14c677de
-- 0x9225ed18 0x065327c9 0xd1ff6a0e 0x5516517e
-- 0x53c6f5c2 0xed5983cf 0xaa1d18b9 0xbe300d7f
-- 0xadc525a7 0x07ea81b6 0xfc517a09 0x4ead3f86
-- 0x45435f41 0x2efa58df 0x02348ebc 0x30ed6783
-- 0x190b4fb9 0x85c55d6e 0xc9ed8896 0x416ee113
-- 0x9b3536d9 0x30577cc0 0xbc4b88c8 0xcda59612
-- 0xdfe2bd89 0xd60cde71 0x98843881 0xcc1f32f2
-- 0x18b3f643 0x671a14ca 0xd6482a47 0xac6a7d38
-- 0x1897da16 0x91b6fcb3 0xf199bb35 0xd38c00ba
-- 0xa8c946b6 0x52a1ad37 0xd38ed2d4 0xa1d6f81d
-- 0x5af6865b 0xebdb858f 0xb844b110 0x53201ea2
-- 0x08870945 0x10c869de 0x19849613 0xdb35d3ed
-- 0xd68ebd6e 0x1056fd48 0xf1a0e305 0xe3982ebd
-- 0x6f7cc391 0x5956374a 0xf414a5a2 0x325119ab
-- 0x99ee1f96 0x6f044bd9 0x8374805b 0xb55c366c
-- 0xa2c77051 0x68f199e5 0xd36a9714 0x878f847b
-- 0xec0394ae 0x86d0584b 0xf4df66b9 0x451cd039
-- 0xf4de06ae 0x35dd0554 0x818a342f 0xeefdbfc9
-- 0x5b4e9edd 0x22d9313a 0x3b710d60 0x6deaeb4c
-- 0xa9e26512 0x98d31867 0x3c2c2d61 0x7eb5ce41
-- 0x40890db6 0x7a3aa660 0x3ef4f306 0x7322881f
-- 0x49dac4d5 0x96efe685 0x27bb7f49 0xbb955283
-- 0x79c5f2b7 0xff599c28 0x28ee7f5e 0x9f324b73
-- 0x45edb7cf 0x39a8b79c 0xd0919c6e 0xe149b29d
-- 0x62f5f82e 0xebcfa23e 0xd4d68937 0x54270090
-- 0x958af0d4 0xa1e4e799 0xaf68ac19 0x82a84f4e
-- 0x50f67b84 0xd5e59629 0xf5fdf24c 0xab1d63c5
-- 0x30835807 0x431fce5f 0xe5f96f4d 0x3f6b4802
-- 0x14010be8 0xdca45ae5 0xc82709af 0xff76ce2c
-- 0x8b222c22 0x73a2d948 0xa8d59cea 0x8c31849e
-- 0x469c2e5f 0x3777ee84 0x5fdfa5da 0x02ef9bb2
-- 0x792d3194 0xbed63f21 0x0b6dc5f1 0xc9d7fe08
-- 0x6df7883d 0x366566cf 0xef772769 0x37826465
-- 0x1cdc3086 0xa69ff7b6 0x235012ea 0x292f7e75
-- 0x30bdd0fd 0xffdc9df1 0x95c6d570 0xec206204
-- 0xc6cd42cb 0xc0d6dfd9 0xb7a16b71 0x17fa527e
-- 0x295f2c79 0x990f9820 0x8b8f447d 0x193f9ad1
-- 0xebddb2af 0x5dd532eb 0xf1bbd8e8 0x3444a3f4
-- 0x18ccce93 0x05edeb4f 0xc4a6b935 0xba37aab0
-- 0x96076ba4 0x250dc2f7 0xc4093548 0x030e777d
-- 0x7ea40933 0x8da7b1dd 0x59c0b79f 0x807d437c
-- 0xf5233ddf 0x54c1983f 0xfc18771b 0xe74b85f0
-- 0xdbd725b5 0x70cdd153 0x4ffe300c 0xfda4bdae
-- 0xf4ac75d2 0x91c4e15a 0x34d92b97 0x16356a79
-- >;
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/Makefile u-boot/arch/x86/dts/Makefile
---- u-boot-2015.01-rc3/arch/x86/dts/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/dts/Makefile 2015-01-01 17:34:32.253503252 +0100
-@@ -1,6 +1,7 @@
- dtb-y += link.dtb \
- chromebook_link.dtb \
-- alex.dtb
-+ alex.dtb \
-+ crownbay.dtb
-
- targets += $(dtb-y)
-
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/microcode/m0220661105_cv.dtsi u-boot/arch/x86/dts/microcode/m0220661105_cv.dtsi
---- u-boot-2015.01-rc3/arch/x86/dts/microcode/m0220661105_cv.dtsi 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/dts/microcode/m0220661105_cv.dtsi 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,368 @@
-+/*
-+ * Copyright (c) <1995-2014>, Intel Corporation.
-+ * All rights reserved.
-+ * Redistribution. Redistribution and use in binary form, without modification, are
-+ * permitted provided that the following conditions are met:
-+ * .Redistributions must reproduce the above copyright notice and the following
-+ * disclaimer in the documentation and/or other materials provided with the
-+ * distribution.
-+ * .Neither the name of Intel Corporation nor the names of its suppliers may be used
-+ * to endorse or promote products derived from this software without specific prior
-+ * written permission.
-+ * .No reverse engineering, decompilation, or disassembly of this software is
-+ * permitted.
-+ * ."Binary form" includes any format commonly used for electronic conveyance
-+ * which is a reversible, bit-exact translation of binary representation to ASCII or
-+ * ISO text, for example, "uuencode."
-+ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
-+ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
-+ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ---
-+ * This is a device tree fragment. Use #include to add these properties to a
-+ * node.
-+ *
-+ * Date: Sat Sep 13 22:51:38 CST 2014
-+ */
-+
-+compatible = "intel,microcode";
-+intel,header-version = <1>;
-+intel,update-revision = <0x105>;
-+intel,date-code = <0x7182011>;
-+intel,processor-signature = <0x20661>;
-+intel,checksum = <0x52558795>;
-+intel,loader-revision = <1>;
-+intel,processor-flags = <0x2>;
-+
-+/* The first 48-bytes are the public header which repeats the above data */
-+data = <
-+ 0x01000000 0x05010000 0x11201807 0x61060200
-+ 0x95875552 0x01000000 0x02000000 0xd0130000
-+ 0x00140000 0x00000000 0x00000000 0x00000000
-+ 0x00000000 0xa1000000 0x01000200 0x05010000
-+ 0x19000000 0x00010500 0x15071120 0x01040000
-+ 0x01000000 0x61060200 0x00000000 0x00000000
-+ 0x00000000 0x00000000 0x00000000 0x00000000
-+ 0x00000000 0x00000000 0x00000000 0x00000000
-+ 0x00000000 0x00000000 0x00000000 0x00000000
-+ 0x9557a557 0x7d7a0fe3 0x8e2fbe53 0x0db9e346
-+ 0xd35c00d6 0x21bb34b7 0x662b6406 0xa0425035
-+ 0x3d028208 0xcb843695 0xee06be0a 0x9817efa7
-+ 0xb86c0d16 0x45f70c93 0x79fdc3af 0xd5f30da7
-+ 0x460f62b0 0x238a0470 0xf0ec95bf 0x97b9c176
-+ 0x6d612851 0x69b9b4b6 0x1df769cc 0xe11674df
-+ 0x1b579adf 0xc8bcc050 0xcdb3e285 0x327592c1
-+ 0xbeb6047a 0x977f6be5 0xc4854052 0x27f38b66
-+ 0x4ca5eab3 0xf806decc 0x2be4b409 0x460a3b03
-+ 0xde2f6e0f 0x53ce08b3 0x3ef0ef93 0x4e013088
-+ 0x226f8a5c 0x57f7d291 0x8d640bf7 0x8a998907
-+ 0x40464dd8 0x804ef3e5 0x647e35f3 0xeabee2d1
-+ 0x3a5ce9c7 0x4d7ee530 0x564321ec 0x9e85107e
-+ 0xd595581d 0xcbf6efde 0xed3010ed 0x3d607e82
-+ 0xe32d4b6b 0xd06fec83 0xf39240a6 0xe487988d
-+ 0xddbefcbe 0xefaf1121 0x96bf9acb 0xacce795c
-+ 0x7fa5f89b 0xbe440e5d 0xb6d3a3dc 0xcad17290
-+ 0x503ae748 0x04c80b8d 0xd394ea6a 0x3e4072c3
-+ 0x11000000 0x0b0ae65d 0xc6c53cbd 0xd52a6c2d
-+ 0x84cc192f 0x89498e7d 0x89270686 0xe68105e0
-+ 0x4073a570 0xd3338d8e 0x51193152 0x7266182f
-+ 0x980553fa 0x51b89c90 0xd13b6151 0xe6e40a91
-+ 0x0ab997d8 0x2d0a443b 0x9d3d566d 0x820402d1
-+ 0xdbe79fcc 0x7c5e0b45 0xaf94216d 0xbf717950
-+ 0x520b3dd4 0x566a3396 0x0b6f794f 0xc5dfeda5
-+ 0x71ba0f02 0x4839a5ed 0x39a4e4a6 0xe567c652
-+ 0x0e044997 0x84a0effd 0x09c67178 0x89a815c8
-+ 0xac821555 0xd6719303 0x582b964e 0xfe3a53f6
-+ 0x241b9b8b 0xc6e65457 0x623a4e0a 0x590d7d03
-+ 0xe50e7ce1 0x4bca4700 0xf24f5eff 0x1f1b20d9
-+ 0x77e3227e 0x699b5e5d 0x9aa5f621 0xff08bba0
-+ 0xf17ce716 0x0f5336f5 0xbce055a7 0x8cea9dac
-+ 0x8e09d26c 0x66c3ddf0 0xbec71660 0x75248cd2
-+ 0x29afcf8d 0xa5ade5ce 0xf68bace5 0x63b513cd
-+ 0x4736a842 0x4dbf80df 0x4e85fbdf 0x4dce3d56
-+ 0xf2150fdc 0xc4232709 0xffdc3e3a 0x92b72a3d
-+ 0x9ffce715 0x682959d1 0x091ba33c 0x0f1dc729
-+ 0x2f29a924 0x1df72429 0x19b0365d 0x2d5a3cd8
-+ 0x20617351 0x109074f9 0xf232874a 0x40d79569
-+ 0x97dbe4c6 0xa3b66845 0xa04d2faa 0x6dce9a96
-+ 0xd4963c67 0xd4516f76 0x64a0b04d 0x0b87ddfe
-+ 0xd8a5305d 0x717ecf67 0x77189035 0x40542ed4
-+ 0x5a180ff1 0xb2042e2c 0x6639819b 0x0f0756c3
-+ 0xf939bd70 0x25efe0d6 0x3eb65ae9 0x39a057d2
-+ 0xb2595655 0xf808b4fd 0xe22d0593 0x76256500
-+ 0x0eeee6ee 0x6895d1cf 0x9fc117a7 0xd19e5f15
-+ 0xf677f085 0x1ecdb30d 0x704d0975 0x9099f42e
-+ 0x421be0b2 0xd02548bd 0x3a16e675 0x7d8b051d
-+ 0x9d24480f 0xbc006432 0x184da9ec 0xbad7abef
-+ 0x299f58aa 0xc1a249fa 0x8d9d31f3 0xe73cda17
-+ 0xf41ac993 0x7b88d3bb 0xf349c676 0xb8341361
-+ 0x1b69bc01 0x98e0bfd2 0xf31db8d9 0xeb49b275
-+ 0xabc40133 0xfb7d0701 0xcd5ff353 0x4eaceb8d
-+ 0x67aac555 0x6d81693b 0xe81c555d 0x5d7f3688
-+ 0xd4347083 0xcd861b1d 0xd332f2cb 0x43130028
-+ 0x7f1a1c51 0xe2ce3af2 0xdff5076e 0x6ef21237
-+ 0xf65fc8c4 0xbd28ff14 0xd70f49a3 0x4f559249
-+ 0xd6fe7530 0x1fe89b4a 0xc1cc8975 0x2fd705c5
-+ 0xf2993d77 0x60f2e3da 0xe3ca3c44 0xbd0f70b1
-+ 0x0d333d10 0xa29a6aa1 0x43b5a6d4 0x30d15a08
-+ 0x6df9564a 0xea09045d 0x54ca3f5a 0xfbcfa037
-+ 0x6dd64d1b 0xa4a8995c 0x1f4298f0 0x3f4d9a86
-+ 0x924ee146 0xc2e3f464 0xc247747f 0x8bf5c7d7
-+ 0xf8f0b05d 0xf65a115f 0x4b1ae4e5 0xe131e187
-+ 0xfaf713c1 0x5ff88660 0xcd4916b0 0x448028e0
-+ 0x140711ca 0xffe77575 0x8b7740bd 0x82b6ed95
-+ 0xd94d9647 0x2623c011 0xd54fba11 0x30a7050b
-+ 0x28fe4069 0x70b8bf7d 0xf786eb6d 0xe39db734
-+ 0xa3290669 0x8747e1d6 0x35804a42 0x1c26ed60
-+ 0x30a8880f 0x8170a277 0xa1d97657 0x6ebcb3ed
-+ 0x3bb6ce89 0xff808c1b 0xc919fd1e 0x911d8b14
-+ 0xcbf41a24 0x82abc738 0xfb5e988e 0x328aa123
-+ 0xf19146e3 0x587baa80 0xd105e811 0x83b09389
-+ 0xa29fc554 0xe3831a28 0x183f8de7 0x4ef5656e
-+ 0xcc940baf 0x938bf4b4 0x90627bae 0x14fc3cdb
-+ 0x75e45681 0xf912c1b3 0x7a5b8a0f 0x3b970524
-+ 0x6a74d34a 0xb3da9fe6 0x847a3bd8 0xfc4f7dd6
-+ 0x88fd7f3b 0xbcd74a15 0x3afed836 0x17e31cd0
-+ 0x5d866dcb 0x0ab69608 0xe334f0fb 0x7181d4a3
-+ 0x8dc87560 0xd9c94d6f 0x491c2c91 0xca295ed6
-+ 0xfb8dcd79 0xeb4d3f89 0xec581071 0x0457ebc6
-+ 0x6b63590b 0x9dde4b79 0x3dc0a0aa 0x41ec8a1e
-+ 0xfb2ab80e 0x07adc629 0xb8534a4f 0xd0d23901
-+ 0xcfd024da 0x47c4163a 0xc89d26bb 0xe5cac48c
-+ 0x17c7fbba 0xd992f42e 0x466f5e35 0xce48304e
-+ 0x394683c8 0xef6e6b7a 0xb9d1242d 0xb961debd
-+ 0x432a3dff 0xa4931ea7 0xd9f03907 0xc29e9ce6
-+ 0x4fccf4c9 0xbf234555 0x0b6a6771 0xb29f29ef
-+ 0x7edc4bfd 0x781dcf74 0x4ae31020 0x1ab72d9b
-+ 0x0ac457e2 0xf9291e09 0xd4084918 0xa540d999
-+ 0x223408d3 0x0bd039aa 0xaf0dd904 0x9cfd6a01
-+ 0x826c6bca 0x8e41a96d 0xa56fc4ee 0x6a7509fb
-+ 0x5cd2e6fc 0xb89aa158 0xb1e5d3f5 0x92ccd05e
-+ 0x995d5acb 0x5ed1dc08 0x75038dac 0x4377c835
-+ 0x265d66d8 0x3692096f 0xcd69ee59 0x310df351
-+ 0x087e3133 0xe89e2d58 0x137fd054 0x00f3562b
-+ 0x2ae304e5 0x9db0316d 0x6868cec6 0xb249ccec
-+ 0x9f602c90 0xd3715e7c 0x3fcc8a62 0xa1c1e065
-+ 0x5b4281d4 0x124dfd7e 0xe9d21462 0x77cbc940
-+ 0xf915f2a5 0x66df82fc 0xa8c67c56 0xac4d461b
-+ 0x836deb52 0x95fbb48d 0x3454b6bd 0xd87d7a64
-+ 0xe64d32b8 0xc44c2aa0 0x3e213c1f 0x4d31b94d
-+ 0x4640be5e 0xe127234b 0x9ca54856 0xac7d093f
-+ 0x03d0508b 0x30f5121d 0x6e347d91 0x47772312
-+ 0x318ea26e 0xad3f6902 0xb5598746 0x8be3b65b
-+ 0xc8bbd31d 0x24691564 0xee77d2e8 0x3581944e
-+ 0xeff8eed5 0xa29ea86c 0xc2597492 0x23c1c118
-+ 0x7810c079 0xb966ee47 0x823e9954 0x9e558c0a
-+ 0x74759c12 0x193c6b4e 0x7544597d 0x65c9bf8a
-+ 0x68f5e263 0x718c679b 0xc8dc50ba 0x5f5ab841
-+ 0xc3eaf579 0xc2072358 0x62481939 0xffe7e686
-+ 0x201f3215 0x1d88dc8e 0x28fb4002 0x40c56ec5
-+ 0xb7bcce00 0xd52f5042 0x84498e04 0xcc97fb7d
-+ 0x64035e93 0xcd3478a4 0x15d63309 0xa9e47b85
-+ 0xe835e45f 0x9de598b7 0x94f569f7 0x56689b0c
-+ 0x381f9173 0x708b3e52 0xc81f0649 0x12113041
-+ 0x4694aae2 0x69040fc0 0xe4ba7bf4 0xfadc5729
-+ 0xc168381f 0x1985f118 0xab0ca720 0xf0150799
-+ 0x42690e4a 0x71af3be9 0x9325f3b8 0x36575996
-+ 0x4dc1dca7 0x7e534c37 0x01830a21 0x221eef4f
-+ 0x18698322 0x57a80837 0x483ae2d8 0xef905b54
-+ 0xe01827de 0xae9a8ff1 0x0058be7b 0x052632ad
-+ 0x9df5c90b 0xb763fc7a 0x5535c95c 0x8eb5916a
-+ 0x75fde5cc 0x57d8eeab 0x0dcc35c6 0xbf11c88f
-+ 0x69142118 0x4f35c928 0x7966066c 0xb2d13b4b
-+ 0xdad06d34 0xb5d8f5c7 0xe0bb11e6 0x8a36325d
-+ 0xc1122d64 0xcf07a1a5 0xfe7ce9b1 0x176b624b
-+ 0x4de883fd 0x00a9024b 0x3d3f7271 0x5072895d
-+ 0x2634e158 0x2f3c9a35 0x95e374d1 0x65e66528
-+ 0x47766433 0x4cb805ff 0xbc8f0319 0x6d5055a5
-+ 0x4932e8c2 0xa93fbb4d 0x87f08bd9 0xf5e5706e
-+ 0x409af40e 0x017edf5c 0xc5394c71 0x6fb97b6d
-+ 0x7b5ddb6b 0x0256adfe 0x76d337e2 0xa3327113
-+ 0xfbb4cb29 0xea68ca27 0xa76a865e 0x8cdb2dd3
-+ 0x902642bd 0x16772269 0xb2341eaf 0x858fa943
-+ 0xb087fac9 0xd17de85b 0x3d9c248a 0x0bdcf2d0
-+ 0x874fc03c 0xf19f2591 0x190c06a9 0xc6b5c3ea
-+ 0x472b6245 0xdb9f8201 0x46d27a0d 0x52218ffe
-+ 0xece78c44 0x3ef6e38a 0xfcf19b65 0x536c840c
-+ 0x86d363e8 0xaa852826 0xde17e3ec 0xa9c3b45b
-+ 0xd322302a 0x48f03728 0x2f60d01a 0x3b356752
-+ 0x8a869fd4 0x055d04f4 0x765074fb 0xb0b5c2d1
-+ 0x865ad360 0x0cb6c6e8 0x5de9cf99 0x863938d3
-+ 0xd4d9aeea 0x0babfa86 0x172cfb57 0x972d8f4f
-+ 0xe9aeeb95 0x6acbe297 0xf2459e42 0x415fdd12
-+ 0x84b2e67b 0x47d2d466 0x44bc85a4 0x1a55b957
-+ 0xe4d01142 0xbf4ea387 0x5651e1a2 0x19124703
-+ 0x8aaed1b2 0x841f3ecd 0xc6d6cc4f 0x1f2d8565
-+ 0xba08e74a 0x68e5ecf4 0x07af5ef4 0xdd5a43a9
-+ 0x6086c705 0x37ced045 0x0fb05ca6 0x35f39f3b
-+ 0xda1ecbef 0x1daf6d76 0x5481d7ed 0xc51e8385
-+ 0xa705e11e 0x127d2a7f 0x654d4710 0x1a34370e
-+ 0xf8496ea4 0x4392b6ec 0x2f209933 0x9c5ab017
-+ 0xa4f7b837 0x33e0a7d0 0x98fb0635 0xdefc042a
-+ 0xc7a1f6b5 0x47107766 0xd06acfba 0xb8ac2a93
-+ 0xe21cca44 0xf0150492 0xd4de2e01 0xe0d6e9a5
-+ 0xa758b5df 0x2e1c31c0 0xc4794495 0x3d9cc157
-+ 0xf94aa4f7 0xc2325855 0xcf9ddd12 0xaa70e611
-+ 0x2b2404b8 0x75d87f38 0xa2a6f772 0x61abfa04
-+ 0x23b61fb0 0x87f4067f 0x355abf99 0x2c4e6c48
-+ 0x2dc8a3b2 0x119b08b5 0x3f1f6d09 0x374372f0
-+ 0x24d79d32 0xef2b58be 0x461ab91c 0x1d31267e
-+ 0x8b1b2c7e 0x27a4f103 0x1686c7c3 0x55af0d87
-+ 0x61c2503b 0x9ffcca7f 0xc3cbdd07 0xd49a4f3c
-+ 0x9ddc2ac9 0x335e1b2a 0xd8dcfc08 0x6e83f11c
-+ 0x53de9e30 0x7b774670 0x15a97571 0x1ecacf66
-+ 0x26581520 0xeee3496b 0x1fdf8174 0x4ddd3c61
-+ 0xaa504fc2 0x0b09792e 0x9b81d1c7 0x10765c95
-+ 0xd3e7b9d1 0xefdb38f9 0x4c44d38e 0xaaf8fd08
-+ 0xceb22e7c 0x5ac74242 0x6baee02d 0x5c7eaa5b
-+ 0x27265dca 0x614c3b5e 0x2994874d 0x486d48a3
-+ 0x5945c4f9 0xe465f343 0x934e55de 0x633199a2
-+ 0x147222cc 0x9bbb0c16 0x6a7e7ef1 0xb7bce9b5
-+ 0x13413d18 0x628231af 0x0fd2d58c 0x4cbafba0
-+ 0xa930fae6 0x91733823 0xe06f99c3 0xda3b57b7
-+ 0x04b8a9dd 0x53451e33 0x11fde5fd 0x0e35bcb8
-+ 0x3a5799d4 0x3893f9c0 0x6b9d0e1d 0xf8d948ce
-+ 0xa33a6628 0x7d09792d 0xd74b3719 0x0afb4de0
-+ 0xfaa5a685 0xecf7f8ac 0xcf34b855 0x89453b4d
-+ 0x12f028c3 0x45edc3fd 0x792c43fc 0x2b054962
-+ 0xb8799a92 0x0ab38d61 0xa6c6a76d 0x7670cdbd
-+ 0xf878b511 0x9a3474ba 0x478673f0 0x7398bba8
-+ 0x4fa10ff5 0xf0a1931c 0xd5938e03 0xe9a23c28
-+ 0x7bea2a5b 0xf7a8db22 0xb94ae0e3 0x2abe6385
-+ 0x0ef2cc36 0x6b997544 0x1e8cc4f1 0x69a5b182
-+ 0x54f9b7c7 0x8fe56cba 0xc7c12fcc 0x8d689865
-+ 0x2d6ef011 0xc6a1b740 0x66af0a76 0x76018cdd
-+ 0x30661377 0xcf1fcf93 0x08046423 0xdf9371c8
-+ 0x1795ec3e 0xf5ea09c6 0xe462de69 0xd7da78a1
-+ 0xd8bda1eb 0x1179f53a 0x2b394767 0x3ba153a7
-+ 0xf9c85bd7 0x5700c827 0x8478ac99 0x080a2f52
-+ 0xdd1c18f1 0x579cea67 0x345c56ce 0x4563f16a
-+ 0xfa1a5b74 0x0b6e233e 0xadc7bd9a 0xbee6d2f0
-+ 0xa249f3ef 0xcdea9b77 0xeaaed82e 0xcc4448a7
-+ 0x34f7cafb 0x7621bb44 0x4965b0eb 0xe6d6b8bf
-+ 0x3c683b25 0x33bcb5fe 0x3f376249 0x5b40dc67
-+ 0x658bf6aa 0x7f0c5d0d 0x61514591 0xeb3bb83f
-+ 0xc2e208dd 0xe82f08f2 0x6ef75ae5 0x9c11bc0d
-+ 0x289c0553 0x1578ce5d 0xb7f05c0e 0x818c5ebd
-+ 0xe566ec9b 0xc6995b3f 0x0c02aac3 0x2b4264b3
-+ 0xf9cad304 0x5b0479fb 0xf8ce8d6f 0xb7d80d8b
-+ 0x41a0d223 0x71ec8a7a 0xc9d74d41 0x245c5988
-+ 0xf607fc59 0xf1c7b6ab 0x142ef712 0xbf607800
-+ 0x281e5911 0xad9a3e63 0x87b59384 0x7ebdc04c
-+ 0x6f47867b 0xb6a304ac 0x289f65e7 0x335fc866
-+ 0x77eb11b3 0xb70c25b2 0x70b43d52 0x684d46c0
-+ 0x0940459b 0xde739ede 0x0b438a29 0xb713e77e
-+ 0x71f539b7 0x8b2f0f7b 0x8d8ab95d 0x42cde8c9
-+ 0x08c259d1 0x021eda69 0x2af81ddc 0xc7d13028
-+ 0x05abfa20 0x6a61008b 0xfc62557f 0xd6d731b2
-+ 0xb080aca3 0x6acae4a3 0xab33d2bc 0x7983c177
-+ 0xdf0c357d 0xb8dcb956 0x9c214460 0xfeb75d75
-+ 0x9b3d468b 0xd2c3106c 0xb1bd118e 0xf26df6a8
-+ 0x11b9c4d2 0x031357f9 0xf7af8a12 0x70fef26c
-+ 0xe5d8b8d5 0xf6746fd8 0xd6cc3266 0x4158e59f
-+ 0xa38fbfcb 0x01c61ff6 0x44c7c4e6 0xf26db3aa
-+ 0x46bb6d84 0x0a794535 0x1d5eab72 0x42345de7
-+ 0x0c7e6d47 0x8bacc223 0xb7334b8d 0x3d9d951b
-+ 0x18f4afc4 0x9c0cb708 0x53b71b82 0x603e8350
-+ 0x6f2df978 0x0c6f3f0f 0x661ebca9 0x30788bd0
-+ 0x982959c0 0x50aa1351 0x672297c1 0xa490a756
-+ 0x21c9e911 0x977e172e 0x0446db50 0x49b711c1
-+ 0xbc6d54c7 0x0fe0adb4 0xc4ec0fe4 0xae6d09b6
-+ 0x316cfa53 0xba68cc8b 0x104bdbe9 0xc31639a3
-+ 0x812a97fb 0xa1c6884b 0xc884d473 0xe3057c15
-+ 0x5ee879a3 0x5abe8262 0xb906bbde 0xfd98fcbd
-+ 0x6ae15c96 0x44a17e0e 0x28acfa15 0xb345122c
-+ 0x6ddc4244 0x005eb369 0x22d038bc 0x0d226e4f
-+ 0x64c7ed6c 0x7964b8d9 0xbc5d668d 0x99155e56
-+ 0x9979151c 0x65312a00 0x0271d338 0x64867293
-+ 0xed0d26fb 0xe69c5f02 0x93fd6871 0xf5702656
-+ 0x4fad1c2b 0x20f8c272 0x438b964a 0x87ff3fa2
-+ 0x6706537a 0x437b5709 0x6fb797dd 0x85679fab
-+ 0x00da6b51 0xeecc5540 0x2998791c 0xc36d40ef
-+ 0xb545e334 0x9ace5e06 0x8a9e6c54 0xc341d0cd
-+ 0x1478a2d4 0xb81413bd 0x80601f72 0xa1b250b9
-+ 0x1cb7f5ce 0xefad630c 0x32325fcc 0x29e3474d
-+ 0x6a7ae043 0x879ee630 0xdc1e8a55 0x7ae794a8
-+ 0x4ee38039 0x2ff4947a 0x53bb84b1 0x8f0b077d
-+ 0xaa4c543b 0x9aa88443 0xeb31a017 0xf3485983
-+ 0xe53b855c 0x6e17aec6 0x726458a6 0x5acf4345
-+ 0xa1b95c5a 0x30668c67 0x47fb5dc7 0x8aafbff4
-+ 0x4b94ef01 0x07bd6231 0x544afcf3 0xfdffca2f
-+ 0xce847471 0xe90abc6e 0xf05e3cc1 0xf602a9c8
-+ 0x8f104b51 0x1ae3da07 0xd07dfc04 0x561d9373
-+ 0x6f6cc833 0xac982489 0x3c0f8afd 0xfab974d0
-+ 0x397e135e 0x8edb3eb4 0x452b9509 0x3972829d
-+ 0x639e3981 0x1c758ec1 0x11428fa5 0xe8308fa7
-+ 0x571d71b9 0x94e40c2b 0x1aaaa397 0xce9283ae
-+ 0x599bbb93 0x51c04bf7 0x556bc74f 0xf6e6e799
-+ 0xc34191e0 0x5f06bce6 0x9f63ecd1 0x54437905
-+ 0xf8f9bd50 0xde82cbf6 0xe11a9949 0x9d312bfa
-+ 0xe712e3db 0xb57eabc9 0x57682068 0xc91c2e3c
-+ 0x681e4fbd 0x0ecd3452 0xcc893248 0xf13f0600
-+ 0x9a8a9194 0xb4c1cd29 0xd504d8f2 0xee6c5b8a
-+ 0x211c9958 0x7a4f9c30 0x32775708 0xda97bf03
-+ 0xf7035e57 0xbe77d547 0x37accd1e 0x6c537775
-+ 0x8d63b752 0x7fec4a3c 0x94211d9e 0x60bfeb2a
-+ 0xebd47130 0x747d52fc 0x8434f487 0xac9091cc
-+ 0x8f8b228f 0xb77f96a1 0xc21fede9 0xa9e2678a
-+ 0xbc815194 0x54d677ac 0x66c11faf 0xfb666595
-+ 0x01e5e973 0x5c990d0c 0xf2cea425 0x5b516ff8
-+ 0x8c932784 0xd18feb32 0xb5acd3d3 0x1703b89a
-+ 0x34fb512c 0x0ac83386 0xd58c5728 0x5c018ed6
-+ 0xbe0908a0 0xd490b0e9 0x0ec94527 0x2f281499
-+ 0x471df723 0x03eddc08 0x9b99d975 0x11535b70
-+ 0x5802288c 0xb3512d42 0x415a9c0d 0x52dbd146
-+ 0x8b0c59bf 0xd8160cc7 0xe37dee6e 0xfd5211cc
-+ 0x5635ff4d 0x8d783398 0xc11f5d62 0x54ca73b4
-+ 0xc3ebdf96 0x835e7883 0x9cd03137 0xe4b4f709
-+ 0xdbde6d86 0x2b562b2d 0xfecc0df5 0x172a5ec2
-+ 0x568b52b9 0xf542957c 0xd738b325 0x49c49aaf
-+ 0x6eb4c9ad 0x363f4978 0xac4b0cb3 0x4ec8dca8
-+ 0x7a2ec2ba 0x10ff39bc 0x8b8748d5 0x6a86e67b
-+ 0x0d81e2b6 0xf4bde138 0x02249333 0xab0c7acf
-+ 0x4ce5e894 0x1656dad7 0x46c59329 0xa849fea0
-+ 0x3d0400be 0x6898c4f7 0xd866ff9a 0x84a5b170
-+ 0xc997009e 0x80524f6e 0xc80fb5dd 0x5bde0181
-+ 0x0bb0c8a8 0xe5a6b9e4 0xd4753f0a 0xda9bf0c6
-+ 0xd6dd041b 0x4c7338f0 0xa223bd71 0x23b58f4a
-+ 0xf6e127dc 0x1777033d 0x5b057a0f 0xe08af0bf
-+ 0x17c07032 0xbbc3f27f 0xac6dc98b 0x921e2f12
-+ 0xcf32236d 0x6cb700a8 0xa3b4e5cc 0xe9b65d73
-+ 0xca7d6f44 0x7b5917f6 0x7b80dd21 0x5ee87e45
-+ 0x86799f71 0x0667e036 0x8f97dcca 0xc4bfd5d9
-+ 0x90737eed 0x41b5a457 0xc6c96301 0xf8933e95
-+ 0xe51c2456 0x00c661f4 0x8a0e1aaa 0x92aa4181
-+ 0x1e3f8638 0xd481a14a 0xaf637189 0x91622fb3
-+ 0x4450865d 0x4202b431 0x5248342b 0x01ff713b
-+ 0xe33b5ec5 0x912d6856 0x10deb2ac 0x9072c180
-+ 0x24d792af 0xa39c5dfd 0xb4c94140 0xfeb32004
-+ 0xa174dae8 0x49da7dfc 0xa4db1090 0x7d2a998b
-+ 0xb7eba69b 0x9b824871 0x3557bd1d 0xd3a73d9b
-+ 0xf225310b 0xad1ffcf6 0x2d5f075b 0x592de6f4
-+ 0x69e438f4 0x4ed8cac4 0xa79c947f 0xb95f9590
-+ 0xb8ede5c9 0x0b1c9229 0x85a4b30e 0x65149920
-+ 0x433461a8 0x186fda4f 0xbaee7097 0xd3cac1bd
-+ 0x8bc32ca2 0x914f1512 0x9b619478 0x582a53c9
-+ 0x4e624a00 0x77e445ec 0x6f823159 0xa9c4766b
-+ 0x0dd6ad28 0xfabdadc5 0x704bfd95 0x08645056
-+ 0xe1939821 0x76650b62 0x8876941a 0xf812239f
-+ 0x2869ce13 0xa4d292c7 0xecba40fd 0x83d2fd8f
-+ 0xdd45ccc0 0x7c12b7cb 0xdc0a20bb 0x0d9be34d
-+ 0x4dd16a9d 0x25835446 0xb94d8c21 0x97ca8010
-+ 0xddd09324 0x95ffe31f 0xa86136c9 0x828ac571
-+ 0x9aa7fc00 0x382cc48c 0x015f7186 0xc3fd040d
-+ 0x505408e0 0x21cdc34c 0xbd266059 0x6e2f673e
-+ 0xe4523c1b 0x3ba56bb3 0x1c343938 0xabc0df54
-+ 0x8ba4f1e8 0xfbd4c592 0xb678c884 0xff3be2f1
-+ 0xca013570 0xfb0598df 0x3cb9cc1d 0xe3ba8ca3
-+ 0xc3d7ecee 0x0ae84a0b 0x0d70f0c3 0x963110ff
-+ >;
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/microcode/m12206a7_00000029.dtsi u-boot/arch/x86/dts/microcode/m12206a7_00000029.dtsi
---- u-boot-2015.01-rc3/arch/x86/dts/microcode/m12206a7_00000029.dtsi 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/dts/microcode/m12206a7_00000029.dtsi 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,686 @@
-+/*
-+ * Copyright (c) <1995-2014>, Intel Corporation.
-+ * All rights reserved.
-+ * Redistribution. Redistribution and use in binary form, without modification, are
-+ * permitted provided that the following conditions are met:
-+ * .Redistributions must reproduce the above copyright notice and the following
-+ * disclaimer in the documentation and/or other materials provided with the
-+ * distribution.
-+ * .Neither the name of Intel Corporation nor the names of its suppliers may be used
-+ * to endorse or promote products derived from this software without specific prior
-+ * written permission.
-+ * .No reverse engineering, decompilation, or disassembly of this software is
-+ * permitted.
-+ * ."Binary form" includes any format commonly used for electronic conveyance
-+ * which is a reversible, bit-exact translation of binary representation to ASCII or
-+ * ISO text, for example, "uuencode."
-+ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
-+ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
-+ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ---
-+ * This is a device tree fragment. Use #include to add these properties to a
-+ * node.
-+ */
-+
-+compatible = "intel,microcode";
-+intel,header-version = <1>;
-+intel,update-revision = <0x29>;
-+intel,date-code = <0x6122013>;
-+intel,processor-signature = <0x206a7>;
-+intel,checksum = <0xc9c91df0>;
-+intel,loader-revision = <1>;
-+intel,processor-flags = <0x12>;
-+
-+/* The first 48-bytes are the public header which repeats the above data */
-+data = <
-+ 0x01000000 0x29000000 0x13201206 0xa7060200
-+ 0xf01dc9c9 0x01000000 0x12000000 0xd0270000
-+ 0x00280000 0x00000000 0x00000000 0x00000000
-+ 0x00000000 0xa1000000 0x01000200 0x29000000
-+ 0x00000000 0x00000000 0x11061320 0xd1090000
-+ 0x01000000 0xa7060200 0x00000000 0x00000000
-+ 0x00000000 0x00000000 0x00000000 0x00000000
-+ 0x00000000 0xd1090000 0x00000000 0x00000000
-+ 0x00000000 0x00000000 0x00000000 0x00000000
-+ 0xfd2a2f68 0x82ac7ebb 0xa4916328 0x7480b81b
-+ 0xd329a777 0x25750339 0x9a8f7a9b 0xf1da9cb8
-+ 0xb1be7b1a 0x621d5a35 0x94b57e2e 0xa9def809
-+ 0xe4492a43 0x530252bf 0x1040fada 0x8a853a89
-+ 0xfb0e6e76 0x6d191ed9 0xefd28b83 0x946414e5
-+ 0x13f415d5 0x28487029 0xb69855e8 0x516cbedc
-+ 0xfabbea88 0x9f90e8a1 0x211793d8 0x54653835
-+ 0xa7789a08 0x754791d9 0x484764d4 0xdca45615
-+ 0xf64844f4 0xdbd754d0 0x7d2b0ff3 0xd023e25a
-+ 0xb048bbcb 0x83038b5c 0x57e17d17 0x735f1e9c
-+ 0x8982c22e 0x6c7b2ad7 0xb26e3b82 0x7121e035
-+ 0xe4ea8dba 0x68d4f406 0xaaafdb13 0xf119b472
-+ 0xb5853303 0x20698005 0xcf34604c 0xdc17d19b
-+ 0x042d6e97 0xf0300325 0xe1b55072 0xc2804918
-+ 0xd6d7a912 0xf908c81b 0x4f9979ae 0x0179f8c6
-+ 0x2f13e3c0 0xc5911467 0x39ad6c23 0x9c9d8837
-+ 0xf3c3f767 0xe56b4a96 0xdad7cebc 0x6eaaee57
-+ 0x2215ca7b 0x4cee4f65 0xd9a51c2a 0xf33c80a1
-+ 0x11000000 0x0b468bda 0x0b57c7cb 0x885fad4b
-+ 0x8a37307a 0x68cc7d5b 0xb6395b55 0x583626b8
-+ 0x21efe98d 0xa516cc42 0xf5b978b1 0x585d8a11
-+ 0xdd5f2ee4 0x17b1c7eb 0xb6f005ea 0x9ecc6ac6
-+ 0x82c0f1b2 0x25a114fb 0xa6086296 0x93da75f4
-+ 0x0695ff88 0xd413dd65 0xccf7609e 0xb7718aa8
-+ 0x334406dd 0x28de253f 0xfb43ca83 0xa4674656
-+ 0x7392e05f 0x9b062c62 0x17571892 0xb5811cbf
-+ 0x9d64666b 0xa01c1500 0x5893e418 0x07ba6ed1
-+ 0x0eebedd8 0x299a52bf 0xdfdb6191 0x4e846b26
-+ 0x298b7431 0x576f4479 0xf5317e04 0xc9492745
-+ 0x167c42e3 0x0c0cd705 0x82756ce5 0xe81ba860
-+ 0x536c357c 0xc27433fa 0x41c8078f 0x1ff779d0
-+ 0x73ddd76d 0xe606c66c 0xe0ad45bf 0xfebdc310
-+ 0xcb2aa836 0x39903a79 0xe53d5dc1 0x0cb6a1ff
-+ 0xe6091d08 0xcb2961d8 0xd38987ff 0x2bd624fd
-+ 0xfb4e484a 0x8c60efbb 0x0ed088b5 0x5a142b04
-+ 0xa737bab1 0x44da29a2 0xc046ecb1 0xe7ccefdc
-+ 0x81895d2d 0x41266fa8 0x52a5e25e 0xcfeac133
-+ 0x252b0737 0xec54b6c8 0xe1c9ebf6 0x25180c1a
-+ 0xea65b9e2 0x5e9ada96 0x08559e07 0x414fcece
-+ 0xdb4927f7 0xa229106d 0x6a7db273 0x8ac6a901
-+ 0x00a87e4d 0x14fd1e2a 0x63a5fa87 0x5ca223c5
-+ 0xc0c980c1 0x42c447ef 0x5b274187 0x75bd6279
-+ 0xdb44dae2 0x60856af1 0x777caf5f 0x298e810a
-+ 0x93f4f418 0x9e1ddf3f 0x6f589046 0x18ea149c
-+ 0x4a5ce4b0 0x529db285 0x3c2dde59 0x1d680e51
-+ 0x3a62d819 0xdf4c01d2 0x432a8f06 0x70a37043
-+ 0x4a0d4baf 0x0d3395be 0xfce0391f 0x5228aac2
-+ 0x9dd9b00e 0x6149f393 0x6fee1d85 0x1d3628cb
-+ 0x107076de 0xd99fe940 0xa227eec2 0xc97d8119
-+ 0xcf2fa8b2 0x821dac93 0x518875f2 0xd18d1d47
-+ 0x3e27fdcb 0x47823f98 0x20d42c1e 0x9a58812b
-+ 0xe0987435 0x1426f12f 0x61d6f627 0x5c58d415
-+ 0xe5ca80de 0x9e11e526 0xbccc0f94 0xb49cec4d
-+ 0x357f947c 0xbef0e2f2 0x5b9b2596 0xddc87ff7
-+ 0x5f2705f8 0xa25f2be7 0xbb45a165 0xe49ef6d5
-+ 0xe76e250a 0x75584c7d 0x7900da7b 0xee0e3360
-+ 0x6988740c 0x4aa56944 0x2d485383 0xef45f5d5
-+ 0x0df4b0f7 0x48199182 0x5b33c21c 0x8f2483c1
-+ 0x8aae6c50 0xaf406ccb 0xb7522bda 0xeafb64de
-+ 0x9a9b1fd7 0x3ab46c34 0x0ec5f025 0xe5bc9668
-+ 0xdb108e78 0xd6152ac8 0xc382ec93 0x5abc2565
-+ 0x4f256030 0x856f6eb5 0xb589dc96 0x3de80942
-+ 0x49d20a05 0x8e3ac21b 0x0262ecc7 0x5f1bce89
-+ 0xec50198c 0x0115b078 0xf67d94e3 0x1cc3682b
-+ 0xfb2d4ab0 0x4d6ce252 0x1d7aace9 0xf7e99257
-+ 0xc1235e85 0x8129ee72 0xb6cfbb13 0x6b851ab5
-+ 0x430633d1 0xe9ed33e9 0xfe85a42a 0xb4583c0a
-+ 0x35a65f5e 0x5fb0bc81 0xe16db440 0x7d022cf2
-+ 0x8f832920 0x20ed9ad4 0x6a4ace8b 0xf4c85869
-+ 0xf17dd57b 0x277ae0d5 0xb5f59c50 0x35d099a5
-+ 0x9ce955ae 0xcb200000 0xcedc4073 0x2a2ba8b2
-+ 0xa1b53439 0x46ced775 0x59069604 0x6488f5d8
-+ 0x2bc0af55 0x643178a2 0x36f62be3 0x2606f0a1
-+ 0x3057cf8a 0xc28f4a3d 0x708e8020 0xb3fccf9a
-+ 0x29b79fa7 0x35622d93 0x85eb0e68 0x80fa3b59
-+ 0x143f340f 0x20e17166 0x169fe55d 0x698f3655
-+ 0x0bc8b45b 0xde3aaf6c 0xbd597266 0x75505401
-+ 0x44d0095d 0x4c00f346 0xfb9ef2c6 0xee70ef96
-+ 0xae807621 0xfbbe7490 0x9c0a283e 0x01a8058d
-+ 0x1be53568 0x0b8dc8a8 0x45afb745 0x3ee1ff58
-+ 0xe772e14e 0x3ca4e729 0x6973e751 0x764f244e
-+ 0xca8d1621 0x6c4fb15c 0xae972e6d 0x3d26c6d3
-+ 0x5ca8f450 0x6328d65c 0x2e7cd88c 0x87dddcc1
-+ 0xcbbdefc6 0x1ab8c0cc 0xd21e503a 0x20c11d27
-+ 0x2f0adc1d 0xc24240d2 0xc73aa069 0x99afc53e
-+ 0xcab27e40 0xbe107ccb 0x8ad5f0ae 0x9024c188
-+ 0xe02bb39d 0xdb784309 0xf91acb54 0x4d15b75d
-+ 0xd339c237 0x3b556619 0xf69f91f6 0xca6fcfd4
-+ 0xb5ddf471 0x0698490e 0xb0855c30 0xe2b34b13
-+ 0x3c979248 0xc0484a59 0xb4cf9f4f 0x7975f2ac
-+ 0x602259d3 0x89364c24 0x37f29913 0x0b4c88a0
-+ 0x23f0b663 0x309c13d2 0x80a3d12c 0x4c866e87
-+ 0xea7e29c0 0xbc33db6e 0x3c3af584 0x63da0de7
-+ 0x9bc6bf5f 0x3b948269 0x4d41b09b 0x5724dd20
-+ 0x4e16618b 0x5917781f 0x4bdec762 0x562cc3fd
-+ 0x50e59d92 0xb3edea05 0xa6ceaa68 0x60af473d
-+ 0x78a99aca 0xd60ba313 0xe502992c 0x0c25c2ba
-+ 0x476eebd4 0xe7e23958 0xc4ac2757 0x0d6695ec
-+ 0x7664b4f0 0xb87ed0a5 0xdcf23b2a 0x76d38802
-+ 0x21699284 0x87b80e7c 0xf0e34f45 0x4bb84bc8
-+ 0x0316744a 0x26de0ed4 0xb25ff5e3 0x31445bb1
-+ 0xaccc5b87 0x271b976a 0xcdf5663b 0xe142d271
-+ 0x1af28339 0x7d304ca4 0x11ee6243 0xdf70fbc3
-+ 0xb8d88f25 0x4c2d9626 0x8eb72c77 0xceee1817
-+ 0x4e1b35f7 0x6c261f67 0xa32a2801 0x67ace2af
-+ 0x7c87f8c1 0xca6f2505 0x982269dc 0x137080a9
-+ 0xe40fa78a 0x3897a66a 0xdc5d0ff7 0x58016e44
-+ 0x21bcc988 0xf2a4df15 0x9fb021d4 0xca59e882
-+ 0x3673d08e 0x7cf5d500 0xd41ab9df 0xc17b4a58
-+ 0x2cb85aa3 0x01103427 0x5a8fac5b 0x7ac856b2
-+ 0xb1532563 0x1b94b518 0xadea3bfa 0x597109a9
-+ 0xf28df608 0xc2bf64bf 0xf517bb53 0x61b7d5ad
-+ 0xa4a38e9d 0xa9fdc597 0xf990f2f1 0x00466640
-+ 0xcecd06a7 0x5eef09d3 0xb67a08ae 0xd780d8a0
-+ 0x07641a71 0x9dc9f7b9 0x5f0b5a44 0x94dfe40f
-+ 0x6db0cf7c 0x3fe72d11 0xb2443ea3 0xe051f336
-+ 0x4ec8a6a4 0x11201430 0xb44e2b28 0x5bd018b0
-+ 0x444ba2bf 0xa63031eb 0x147f9826 0x3fc56ac1
-+ 0xd3a75ad3 0xc3f71815 0x340bd72b 0x3e5a488d
-+ 0x0cd8fb05 0x17791534 0x68e7321c 0x1489c701
-+ 0xa39f2d71 0x7cbbd9f9 0x42cba365 0x024f7d9a
-+ 0x29ef2da1 0x1eb9c4e6 0xc8b24985 0x9c33412c
-+ 0x5fd3003d 0x7f0793b9 0x497b6ef4 0x3af648f2
-+ 0x22f4a1db 0xac8500c7 0x3b1a859a 0x57921c78
-+ 0xb0efd82e 0x8e60452d 0xd86ed85f 0xc1ae73d1
-+ 0x633d83dd 0x7dbee7f6 0x46ef5590 0x027f2d50
-+ 0x3c81bcf1 0x37a3940d 0xc92d0a8f 0x270cd02d
-+ 0xaeed9d1c 0xb6d76bcd 0xda27f251 0x1625a683
-+ 0xf2d1302d 0x3f95bc0e 0xdb4b36e0 0x96fe1e6e
-+ 0x1dcbca54 0x57d44867 0x14aada62 0xf20f5444
-+ 0x9ccf560e 0xb8d178af 0x9affe58e 0x8e3bd741
-+ 0x7dff29e9 0x3c1998e5 0x9909e1df 0x1bbbd50f
-+ 0xfda14fdb 0xb66fb65e 0xe646d5f3 0x71f41791
-+ 0xbca50c12 0x57c6d2a2 0x8f5c750f 0x48f87301
-+ 0x9103acac 0xef185c41 0x6dbe9524 0x3c040c16
-+ 0x211dc2ac 0xa61925bb 0x20bfb41a 0x98253e77
-+ 0x4d5ea3b8 0xc2b11b6d 0x7f072104 0x58340448
-+ 0x596e3090 0x72484d15 0xf5e5d16b 0xc1b9faca
-+ 0x5c786fdb 0xdcd97509 0x73d21aa9 0x2a90c7ae
-+ 0x396ed0b1 0xa23e63da 0xea20cb1b 0xb2bb359b
-+ 0xb5df6ff5 0xdbc470b4 0xa6fd8d97 0x9458f6d0
-+ 0x97434866 0x2c9521c4 0xc51f6ad2 0xa33fb3b5
-+ 0xb26915d7 0x3ef363da 0x9ff9f5c7 0xfa236e60
-+ 0xa12b879d 0x2f98bd3b 0x95282ca8 0x64f90513
-+ 0xc03d2962 0xb13b82f8 0xfdc2eb41 0xc39dcf3b
-+ 0x95a409af 0xbaba6e7e 0x0d028543 0xc5b9426b
-+ 0x35f5727b 0x8f3b9f8c 0x6e7b85d8 0x2cfa9b2e
-+ 0x2a7117cb 0xa41f3fe5 0xbe17ff18 0x0f4a8be4
-+ 0x20b9003a 0xebce04ff 0xd6f276d6 0x9fc66d07
-+ 0x83f40250 0x560eaffe 0x92be2ddd 0xdb0ff83e
-+ 0x424f0605 0xb3cf76a4 0x167725c5 0xe3b513e2
-+ 0xc31a1a72 0x9f7161a4 0x25707dd1 0xdb5f2a91
-+ 0x85db06af 0x78443bf6 0xebbd8e7d 0x7909e5fe
-+ 0x618237a6 0xe6dea70c 0xcd3299c2 0x7736d40a
-+ 0x044cda94 0x6cec190e 0xb9652583 0x51946c01
-+ 0xcba67203 0x0dae0f1d 0x6d0dff0d 0x85756bf7
-+ 0x1db9e08a 0x88977944 0xa6252c60 0x06ff1a07
-+ 0x1b8d319f 0x884f10eb 0xbdeb7feb 0xe1681bb9
-+ 0xb5f0cefc 0x5359534d 0x6de87cf9 0x94a78727
-+ 0x15c17557 0x398876df 0x2f85f258 0xa0284d4b
-+ 0x4879ca57 0xb5ab7844 0xb402fde8 0xd520cb53
-+ 0x8a601365 0x8853b510 0x1e0538f6 0x0135f899
-+ 0xa78c7bba 0xa33c8ccc 0x6cf0da00 0xa5f96757
-+ 0x94714373 0x79413ed2 0x27c7b9cd 0xda172153
-+ 0xeeeee91b 0x959d8437 0x660efcda 0x2a6ab94a
-+ 0x8913d65f 0x24246350 0xf6c85ab5 0xf6b696f7
-+ 0xd75840c8 0x046b7435 0xb55474fc 0xd8d8bab0
-+ 0x265e79e0 0x0dd030b3 0x826a182c 0x38f1121b
-+ 0xeb33b5cb 0xe3ca835b 0xe8850761 0x25955d7a
-+ 0xbb6b7fb4 0xbc02ca0f 0x1b03bd1f 0xdd1a59d6
-+ 0x5d48f10b 0x35e35688 0x1411d34a 0x6131c664
-+ 0xc1b8b277 0x1bc8afd3 0x886f0c09 0xc1b6b517
-+ 0x74ec9ecb 0xee2d43a5 0xbc0f122a 0xd1911c88
-+ 0xc7e39b2e 0xa60c39b0 0x942fce7e 0xc8c2a2b6
-+ 0x51978cc2 0xad8d9ed2 0xcc2b0c3d 0xf6aff0f7
-+ 0xbfb3920a 0xd25aa79c 0x67d87d44 0xf612df60
-+ 0xf06dbe9f 0xd4ab61da 0xd96c6b1b 0xb39ab4b7
-+ 0x3368a90d 0x39c8bd81 0xf4ba5ead 0x6fe656ad
-+ 0x93b946dc 0x2181219e 0x7b98805d 0x675af3fd
-+ 0x59760289 0x934b4803 0x4189f27d 0x9503a5fd
-+ 0x42aaa076 0x6b4bd024 0x86c826e9 0xe0370ff4
-+ 0x1bfdf980 0xc487f797 0xd4754c3b 0x1098b2e8
-+ 0x05753a1c 0x3833ede3 0x5f1065ec 0x40cb562e
-+ 0x8d4fc418 0x392290d2 0x622d2e29 0x55df1f46
-+ 0x4ae0893e 0x24ddf8a9 0x302a64dc 0xc93f7504
-+ 0xde8e1674 0x033acbcd 0xc9732a64 0x6f7a7da3
-+ 0x72b7c43a 0xb5110e6a 0x00865c19 0xaf5e00f7
-+ 0x0a80b55d 0x6e638c0c 0x3771d602 0xb4a95ae7
-+ 0x01ba3cff 0x42e350eb 0xedb1d897 0x82f0cfff
-+ 0x98e79055 0x6b0cc62e 0x8ce1735b 0x62645395
-+ 0xd99fc208 0x86ee3066 0xc8f13758 0x2378d582
-+ 0xad41c218 0xc3954b87 0x47acab9a 0x69126227
-+ 0xbf778357 0xc5a7b76c 0xb96894c4 0x89e2dd88
-+ 0x27cc53b7 0x2187116c 0xd397c13b 0x578a6686
-+ 0xe3e58b11 0xdc3e4d40 0x69f064f5 0xdfb64348
-+ 0x42291e77 0xacc21c46 0x5444d976 0x616bcdc1
-+ 0x01ffb3bd 0x5cb926e5 0xbd763a24 0xbf224c70
-+ 0xdeca1d57 0xded1cc56 0x9b6cbcd2 0xee6efaf4
-+ 0x44d634ff 0xf33334c6 0xd275d66b 0x6a1a4c9d
-+ 0xbd675ae0 0x6289d1c1 0x053aeaf0 0x8a170aa1
-+ 0xe12cfbb9 0x0ae15a94 0x1dab08f3 0x9a2657ab
-+ 0x8348417f 0x9572e6dc 0x9c69e518 0x5397dfa1
-+ 0xe46120cd 0xad4457fa 0x0106a79d 0x40b191be
-+ 0xbb64bccb 0x9dda8fb0 0xc74fe994 0x64ac0ef1
-+ 0x3a57986c 0x86e8dc78 0xbb055d88 0x7a1243da
-+ 0x585cafe1 0x8968ad92 0x5b73bf26 0xccf77edc
-+ 0x10ac1643 0x5738ba43 0x3d39ecee 0x57fd555b
-+ 0x36ee9d5b 0xec9115fb 0x4250e03f 0x9e4fd6a6
-+ 0xc547b01e 0x9c84f42a 0x37756616 0x217cb517
-+ 0x33da3c5e 0xa0a7ae6f 0x8ddb7b99 0xbd84ac35
-+ 0x644ec4e0 0xaa62a7ac 0x71795f77 0xd5f67163
-+ 0x77dcc227 0x59f09342 0xf6666ce4 0x1e164a0c
-+ 0x011e205b 0xc4a80a0c 0x7fd31f1d 0x05ccae4c
-+ 0x39b6abfb 0xf4b7ac82 0x39d38e89 0x14c1e7f3
-+ 0xdb3bb53b 0x02577ec5 0x7bc12087 0x65ccc2bd
-+ 0x72492c6e 0xa6ae0062 0x965946ea 0x58e5f31a
-+ 0xfdfd7770 0x052afb9c 0x889b8358 0x2dd65c3e
-+ 0x55418587 0x445af0e9 0x43fe6671 0xae45e776
-+ 0x2c25d02c 0x44805865 0xaa3a70c5 0x7dd55d11
-+ 0x3499f5d7 0xc12e4a51 0x9ef98a38 0x5462e98c
-+ 0x0f73c72f 0xd0481aa2 0x56bccd0e 0x64143a1a
-+ 0xa7913ef6 0x0ca932ae 0x3739ec96 0xac5d38d5
-+ 0xe9c8c754 0xd56e855b 0x950cadcc 0x91cb2e5e
-+ 0x6e170c11 0x1eb66637 0xf641b0ae 0x8ba43c21
-+ 0x3f43b8af 0x8f1596e7 0xb614d1ae 0xac99c14c
-+ 0xe7beddce 0x5757f98b 0xfec1cf89 0x19608162
-+ 0x96479a49 0x1f089d9e 0xc2e4ac47 0x1cdea563
-+ 0x027f57a7 0xc0ba57c6 0x6eb2faa1 0x8e85c333
-+ 0xc391dfd2 0xe2c0bcbf 0xc1f87d66 0xb597d958
-+ 0x3655d5a3 0x2d9adaaf 0x8efd0aa0 0x05d65caf
-+ 0xa28991d9 0x28b6d7cf 0xdcb48013 0x65e75783
-+ 0x8b8b77ed 0xa4b36df8 0xa8ccfb9d 0xd0a1734c
-+ 0x2dc97601 0x35d81082 0x2e6d26f8 0xf3baf2c5
-+ 0x416084dc 0xd8b84ad5 0xa06b9edb 0x45c2b0b6
-+ 0x553c973a 0xbbcda1bf 0xca154d25 0x7a781012
-+ 0x4864ea32 0x0784f663 0x27656507 0xb359d4dd
-+ 0x43d4c165 0x69b844c7 0x31b1b9e2 0x0f3420f8
-+ 0x3cd2e455 0x201920cb 0x93018659 0x5c4a08f0
-+ 0x3a0d094b 0x5448c1ed 0xc888d1a2 0x4826cb64
-+ 0x625da2c7 0x12110d40 0x5cd8e76b 0x26e09eb5
-+ 0x8c6aab45 0x6dd192c6 0x937f1252 0xc927efc5
-+ 0x4c5bf11c 0xdd62c6fa 0xeef59620 0xbffc2d5b
-+ 0xb90299f0 0xb24df71b 0x76656678 0x550b3228
-+ 0x01536098 0x4fbfe03c 0xa82d0c31 0x2eec9bb6
-+ 0x752e6720 0x26322556 0x5d94bd64 0xa2e1122a
-+ 0x25899986 0xb63d5cc2 0x9222b055 0xbf4f0bcf
-+ 0x3d182483 0xc7bb9999 0x97ffc8c1 0xa6500a8b
-+ 0xb8b97382 0x3f6f39b0 0xcaca9f6c 0x7b67941d
-+ 0x7875ea1e 0x3ff25c0d 0x4cff1a40 0xb5a351ef
-+ 0x556a59e5 0x011e995f 0x25a7a5e9 0xedc8707a
-+ 0x42b4ddfa 0xa51a3ddd 0x9c9f1d73 0xc8f24ef3
-+ 0xfcd73118 0x1a61c16f 0x1e2fa7c7 0x1f49826a
-+ 0xd8418fe9 0x726358a8 0x6a0857fa 0x6804ccc1
-+ 0x78a55fa0 0xc3e41419 0x60416b10 0x2afe46d8
-+ 0x0c0ba2f7 0xd3dfa8ca 0xfa474ea2 0x8e763446
-+ 0x1f664c64 0x6a8d06cf 0x1b891114 0xa27c1a28
-+ 0x98ddd324 0x26cc9fb8 0x544078da 0x03acbeee
-+ 0xc3f3b761 0x56797b83 0xf04ac5a1 0x8603b17f
-+ 0xb8989b96 0x28c7be17 0xb750b4a6 0x84b2f7f8
-+ 0x32138f9b 0x7661c86b 0xb7517518 0xf2a961c6
-+ 0x240a0100 0x100c5b96 0xa1931730 0x18513938
-+ 0xdf2baa73 0xd6b55cce 0xf89cab59 0x238c90c3
-+ 0x4799f50d 0x29cd7942 0x62677a47 0x7261f326
-+ 0x4ff7da96 0x294ba5e9 0xb6474251 0x96de1b44
-+ 0x9d84552f 0x1103468f 0xcfd063af 0x5d8a0b6c
-+ 0x172670ac 0xc1a9b97f 0x0a278773 0x08b48bb5
-+ 0x392b3563 0x8f65e926 0x4be71f10 0x7615e05e
-+ 0x98b0c931 0x50bf9779 0x5baa97aa 0xb6e26fe4
-+ 0x2c40971a 0xe5d739f0 0xa7e30500 0xc724895c
-+ 0xc7a3f44a 0x5b381b1b 0xa7a478c7 0x219f567c
-+ 0x42d7a960 0xaae6780f 0xa96c56d1 0xe3787bf4
-+ 0x743f3a5e 0x6b99c9e1 0x36cf72b0 0x784ab5c2
-+ 0x5113773d 0x625393af 0x62c4da61 0x05422921
-+ 0x339711f3 0x3ee04f5e 0xf3a778b9 0x55e1bcf7
-+ 0xe49e5a9f 0x5f0935f6 0xa13e17f5 0x3028d23b
-+ 0xac9a6fd9 0x14006013 0xbf1b3fb2 0xce785f7b
-+ 0x83942244 0xd299d59b 0xf8c0593b 0x71c74beb
-+ 0x7561a1f5 0xb133ace7 0x15d5d4c1 0x21c3bb29
-+ 0x6ab1c2c7 0xee20d3dd 0xcfd62c54 0xedf9a43e
-+ 0x0e23222c 0x5eef5bc2 0xe7426bd0 0x42db58e9
-+ 0x62ffe203 0xd63163c5 0x8dbbcb48 0x9e16d9c7
-+ 0xb6d51e39 0xbee5a6c4 0x5d0bd775 0xeded86db
-+ 0x9eb1454f 0x6217eb64 0xa4b76ae7 0xe3481698
-+ 0x6d576cec 0xe751f610 0x1473bd83 0x4aaead8c
-+ 0xff4a602b 0x01ed092b 0x310f16cb 0x2e199177
-+ 0x693a8ad1 0xf5e520d1 0x1713d604 0xfff1225c
-+ 0x644c81b8 0x1adf5032 0x79058d81 0x7aafda08
-+ 0x80b6c9df 0x6f927c46 0x307bcaa6 0x0a1aac12
-+ 0x7d20bdae 0xd0e9c9a7 0x4530bebc 0xf1dbac36
-+ 0xdee3e8a9 0xa96d2aca 0x291c6944 0x436cfac8
-+ 0x9dd501c3 0x696e0c6b 0xa85d7036 0xca1c1321
-+ 0xcb802235 0xae614fec 0x4f0cf745 0x08604468
-+ 0x93bd00f3 0xf39eb605 0x89a8f420 0x18a7f61a
-+ 0xa0aebc3b 0x723e6ba9 0xed00f2a0 0x231b43d5
-+ 0x37c81702 0x891ffeb9 0x122de4f5 0x90f16757
-+ 0x1eb06046 0x21d5cdd1 0x75fd0e6f 0x7d595ae9
-+ 0xeb8ed50e 0x7bfd8696 0x3b91f3e4 0xd629e74a
-+ 0x1650dfcd 0xda48163d 0x2f8f5aba 0xbc40ee60
-+ 0x5291b6b0 0xb059d788 0x1ed5f092 0x65b7a885
-+ 0x44503d18 0x3a2893c8 0xaf3dab25 0x8ee0a8e5
-+ 0xf82f0696 0xf4fe9322 0x863feff8 0x2cfee629
-+ 0xacd8bcbc 0xb3791232 0xdd694c06 0x2a606479
-+ 0xaed9bc38 0x49a126fd 0x2a9c7581 0xaf43095c
-+ 0xb97acc90 0xca7a25b6 0x06adceb3 0xc8bf7269
-+ 0x6eeb0c59 0xa953657b 0x8e175c3a 0x9facc87c
-+ 0x4c143d0b 0xb4467fe4 0x372b6cbf 0x2099b361
-+ 0xb8ac2cfe 0xb9a798d0 0x15b8b336 0xdab5d568
-+ 0xb53a4dda 0x00ce1ef7 0xefef7644 0x41823aa2
-+ 0xcb8d307d 0x3baf1baa 0x7124a219 0x8d2820df
-+ 0xf3b8cfed 0x95e55a1b 0x8199fa40 0x631042fc
-+ 0xf7886353 0x3592b875 0x3b516841 0xac7aa00a
-+ 0x3dbfec52 0x9b91e8d6 0x0a8ffce6 0xd11429db
-+ 0x92392bec 0xe194095b 0x253d7425 0x6b55919c
-+ 0x4c11de8c 0x10b46ae6 0x5902c153 0x9509ace0
-+ 0xbb65fc04 0x648a35e0 0xab728bec 0x738effb4
-+ 0x416f95fd 0xee30a0da 0xcbaf3cb4 0x312fdeda
-+ 0xcdb5aaf3 0xcc631b82 0xe3bf4d97 0x37e2a1b5
-+ 0x2920c6b2 0x0d995ad3 0x11af607c 0xcacf31d6
-+ 0x781496f2 0x9e478c0e 0xc4c14545 0x89ba2ab0
-+ 0xdb1a8262 0xbb924c65 0xad836a24 0x4374fbd6
-+ 0xd45a10df 0xd4158c0f 0xd4e88c1a 0xee8b8e23
-+ 0x3472ee5c 0xc0a0de0c 0xb1ba04dd 0x7be6532b
-+ 0x0101669b 0x2a56f032 0x12879eef 0xa600458f
-+ 0x20a96992 0xa2e7910d 0x13235ef1 0xb1185320
-+ 0x418ffba7 0xc0ba01af 0x27571c7a 0xde5b661f
-+ 0xdd359089 0x6ae76b8d 0x095784d0 0x400a29fd
-+ 0x5b3276cc 0x774c4e38 0x6a85e14f 0x37d8d1bd
-+ 0x2007cea4 0x3e6942be 0x1a49828d 0xea4d84ff
-+ 0x681b5a30 0xd8ff8440 0xac19844b 0x7553a6d0
-+ 0x389fb0a2 0x1b0526fc 0xa193b9e0 0xb9987cb7
-+ 0x6f14d980 0x0507f958 0xf6a1354f 0xcb9e49d8
-+ 0x5a4e1d3f 0x10d8c348 0xb77cf166 0x5097503d
-+ 0xf0e17ed5 0x72a2e029 0xddc756b8 0x0a0e30e8
-+ 0xf12c6bc7 0x809db2c5 0x243fee9c 0xd2b57957
-+ 0xc1b19244 0x8d59262c 0xff94c28e 0x2050edc2
-+ 0xa4806d15 0x02026bf6 0x2d95c9d1 0xeb336e65
-+ 0x84bcf6ac 0xe53b97b7 0x954eedc9 0xf22209fe
-+ 0xf4771bc0 0x1e405f04 0x1d0ec592 0xcd479333
-+ 0xdfeb3738 0x0ae23cb7 0x03d509c5 0x837a5e1a
-+ 0x634a4467 0x7ee22185 0x102f5326 0x5d002daf
-+ 0xea4e31ce 0x1d2be82e 0x5ebe1ad6 0x354259bd
-+ 0xdaed312d 0x1e598ea0 0xd6a2b9af 0x76eb9bbb
-+ 0x338645d3 0x4d3236f8 0x777011eb 0x0221d076
-+ 0x22dee347 0x1e35037e 0x2f34d4c5 0xdda03e2e
-+ 0xa541311d 0x3acf0087 0xb435b17c 0x08b8210e
-+ 0x7c77f156 0xe20025f2 0xea0e32a9 0xbf766fd1
-+ 0x8b6c4f43 0xf6ca80f1 0x07d1d342 0x272b865d
-+ 0x8261aed7 0xf3bbe9cf 0x5835370f 0xfaaf4623
-+ 0x8cb5a665 0xe6c92e5f 0x22ce69f6 0x61e16f89
-+ 0xf15ec311 0xbacaf7b4 0x1317e388 0xa1869c49
-+ 0x328da67f 0xd818a8fb 0x6f4c7613 0xcc13480c
-+ 0x06789788 0xa7b4e1a8 0x0d8fed7b 0x48308fe3
-+ 0xbe5ff9e2 0x7e7a74ee 0x4ffbb70c 0x551895c8
-+ 0x734ffc0e 0x82b8b8d6 0xdf710f9c 0xc3df529d
-+ 0xf175e377 0xcec6194f 0xc3443fb1 0x52655208
-+ 0x94be229e 0x3279939e 0x771647a1 0x34c9a15a
-+ 0xaae80baa 0x0b32ec13 0x6d59b440 0x50ddd10b
-+ 0x98c166cd 0xfd465f40 0x74eabbc2 0x6dcb95c0
-+ 0xddef6f85 0x54348377 0x905f31bd 0xbde86f48
-+ 0x1322356f 0x90f3d5f2 0x5d2d4de3 0x2d5253a5
-+ 0x729b8879 0x41839289 0x845f8061 0xf5ffcf8b
-+ 0xf25ec4d7 0x30570dda 0xcc69f64b 0xeb024bde
-+ 0xc847bf80 0xeb8c5624 0x4e4d28eb 0x43f6cc1e
-+ 0x8c201bfb 0x1475f9cc 0xde13b005 0x11fd9342
-+ 0x07617ac9 0x2fec6867 0x5b30a62e 0x5a8c91f7
-+ 0x47208b6f 0x680a22af 0x60fd0ebd 0x229ebe44
-+ 0x568c37d6 0xa3eb78b7 0x6f06f502 0x1b183db2
-+ 0xd48e4d35 0x4fb23b3d 0x57d7dc0b 0x3d34b427
-+ 0x0415552f 0x1bbe91d1 0x74e7ecf8 0xb1fdc30e
-+ 0x466a69f5 0xfddf86b3 0xfb61fd48 0xae250961
-+ 0x6a99bcec 0x2142c5c8 0x1c08d4ea 0xe8f849c2
-+ 0xa3cb1614 0x43ac8702 0x22b50659 0x92dc3644
-+ 0x7a40a305 0x4a1e0780 0xfb638be0 0xb0912795
-+ 0x522a688e 0x1133c55d 0x0544a27b 0x3c56a574
-+ 0x748502e1 0xaee58228 0x30ae0736 0x41a029ad
-+ 0xa1e3d0e1 0xa9b66582 0x6ec07231 0xda4dba0d
-+ 0x41db8fa0 0x731529eb 0x87f679d3 0x593d1579
-+ 0x10935a3c 0x793d7b44 0xac680a86 0x1d01ec27
-+ 0x6d669681 0xef056753 0x96aab271 0xae070e5f
-+ 0x3321dc26 0xa5ea33a2 0xf8f14406 0xdc755c9d
-+ 0x7f8e3210 0xc2fd90cd 0x34c102d7 0xe1c744a7
-+ 0xa79f623f 0x07507959 0x34d28c67 0x26cbff85
-+ 0xfa24075b 0x618dcdfc 0x64d52c6e 0xce650b7d
-+ 0xcc414394 0xadc52ceb 0x43667ed0 0xa04f518d
-+ 0xe52196a2 0xbcb7e578 0x2ed0486e 0x4d669b00
-+ 0xf765e153 0xd2f097df 0x4ef97542 0xfa31d688
-+ 0x1698d42e 0x3d828d65 0x222355aa 0xf2c37eb2
-+ 0x3da4052b 0x198577ae 0x819590ff 0x5ab919a5
-+ 0x673d5552 0xd2fa9d52 0xb711b72c 0xabd9c188
-+ 0xb73a4ce5 0x2d20447b 0x3d19d4c4 0x4bbe86d0
-+ 0xd205021c 0xe9875ec2 0x8dcb01f3 0x6e109fec
-+ 0x60a3a693 0x2fb6b975 0x0ed26de1 0x7487f920
-+ 0x83092880 0x4d5fcb5d 0x72b047d0 0xa256dcdd
-+ 0xfef28251 0x41e36ee6 0xd91e2c20 0x7698357b
-+ 0xb3684b1a 0x272311be 0x32860f75 0x44a6cc61
-+ 0x63e3f66f 0x5a1497b7 0xeddf5a57 0xcdd4577c
-+ 0x3cc63cd3 0xf7e72773 0x3fc9bb40 0x97ce4118
-+ 0x1438da68 0x7a32210b 0x2aa07598 0x04e858ca
-+ 0x850e0082 0x0b0f78d1 0xb178c391 0x9a2e231e
-+ 0xa8f3b67b 0x2a08ea99 0x340d101b 0x42973ffa
-+ 0x755ae5cf 0x201213c4 0x445e44f7 0x15a872c8
-+ 0x857b94f3 0x24c023ab 0xb203df2a 0xc4711de8
-+ 0xd1faaeea 0x1eb857b6 0x8c1b712b 0x11ad0f2a
-+ 0xc64cf474 0xff6c128c 0xff13eac3 0xc4952e8f
-+ 0xacdac9d1 0xb8c2f092 0x38d50a33 0xaeec4534
-+ 0xa661a7ee 0x4d19a2bd 0x0f2d95e4 0x9a221827
-+ 0xc9fe071f 0xe53486d7 0x1dc5426c 0x848eea4c
-+ 0x607f616b 0x41a301f6 0xeadc389c 0x1f109048
-+ 0x249f14da 0x2a20d362 0x7c93cd00 0x7ca633e8
-+ 0xe50fb5a4 0xace8f92f 0x49638c89 0x478b4371
-+ 0x60d70e8b 0x0bfb8bfb 0x6cac803d 0x702996e4
-+ 0x15a35d2c 0xd68a2d93 0xe025d5ee 0xd8ca8c86
-+ 0x295393d3 0xce1be3f8 0x0ee6bd15 0xd6735f38
-+ 0x311495e6 0x7eb8bc83 0xea53551f 0x4fa9a90d
-+ 0xe16a9ea0 0x651eb233 0x95f0afec 0xc687ed29
-+ 0x0cd3abc8 0x132bb8b4 0xd70dadd3 0x538e630a
-+ 0x98481e4c 0x0d7e6f1b 0x3986b2de 0xbe0924dd
-+ 0x1d14608e 0x189f553e 0x7a6b7786 0x48bae520
-+ 0xed56a3cf 0x795b4c6f 0x8670597a 0x40eb02ab
-+ 0xf9b0b287 0xec9f86c3 0xe9a8c3a1 0xe6860542
-+ 0x387ad930 0x8676e402 0x633f0709 0xd661d134
-+ 0x011c1396 0xabf1f3f5 0x3fd76128 0x7be75289
-+ 0xa6046e69 0xf3713680 0xa2ed30c5 0x893df28d
-+ 0x197b8543 0x9860bef6 0xf6930c5c 0x6c0c379b
-+ 0x0b0026e1 0x3ca86896 0xa7ea0bdc 0xca94413f
-+ 0x6cbe8d16 0xd3e4edf9 0xb06efcef 0x3a8934c6
-+ 0x00195592 0xa978bf0c 0x7435b0d1 0x3b17d97c
-+ 0x0438684e 0x576ced8e 0x648683fc 0x362a8a87
-+ 0x493fd86f 0x6bbe0476 0x16f74de4 0xbfeaaba8
-+ 0xe6b90728 0xdc252878 0xe0b72eac 0x0872f52c
-+ 0x2bab1521 0xa6c0d894 0x9f2b3726 0xd392e334
-+ 0x785f82ce 0x15bba4af 0xb55cd743 0x6e8e9cf8
-+ 0x047fd2e7 0x1fdfe424 0x8d4820e5 0xce7dd8c3
-+ 0x88c82282 0x31ef9a76 0x1881fc38 0x3932a9da
-+ 0x65bbfefb 0xe00f33b6 0xdd0754aa 0x1f596051
-+ 0x704dfd7b 0x2604be1b 0x08b6c4f5 0x3f244085
-+ 0xd89c65e3 0xcc4cdb71 0x143a2681 0x1bd3d004
-+ 0x009460ff 0x86e314a5 0xb1aff86f 0xaa2599df
-+ 0xbf68de69 0x355c8267 0x9588dbed 0xe47edd9b
-+ 0x266b2ddd 0x129b0b01 0x6e6622a6 0xb3ea4a00
-+ 0x802abd6b 0x7a268c1d 0x9f5a7b41 0x6f4aba0e
-+ 0xe279b988 0x660ef08f 0xf4207beb 0xfa0168f6
-+ 0x93266ea0 0xedfef092 0x302b5e5f 0x7278d2be
-+ 0x58a494ab 0x8f53a302 0xf5e766de 0x1ef717bf
-+ 0x45e2d6fd 0xf593b066 0xaea0f1e1 0x1bd1e027
-+ 0xf853ba21 0x1127c5c4 0x8aa43b18 0xf1fba0b8
-+ 0xe1cfb0b8 0xa9f9fef6 0x1320f1ab 0x5f7dfc74
-+ 0x30f11ab4 0xaf47a3cc 0x9c190830 0xac085edb
-+ 0x8b4db7c8 0x771ec065 0x6d5f3c3f 0xb8815437
-+ 0x20d3c99c 0x00823c74 0x24d63cae 0x7587e453
-+ 0x1a3fd67b 0xa5b361cd 0x789d168b 0x98a93943
-+ 0xd7505c0a 0xa923b38d 0x46097a4f 0x814e41dc
-+ 0x0f50f2de 0xbb548368 0xc48273d4 0xf27b6798
-+ 0x9a6b5231 0x68491e7b 0x3f482179 0x89ea3b35
-+ 0xa7525ffd 0xf8f1f616 0x07859572 0x738cb4b3
-+ 0x8937c6dd 0xf5988c71 0x4874905e 0x677a8c17
-+ 0xd58df987 0xc4210078 0xe6b1c480 0x7a91e14d
-+ 0xa1228a7a 0x09057467 0x6cd59ec7 0x6ba93248
-+ 0xb8e263cb 0xd3305730 0xaec36ee6 0xc773d0b5
-+ 0x2895f8ec 0x6c9f5fb5 0xd32a21a5 0xcea9d058
-+ 0xfa97282f 0x5559ceb4 0x5a0bf57c 0xf3cd99b5
-+ 0x2771f6c4 0xfcc9a35d 0x5143417e 0x7c6f9db7
-+ 0xb47cb7df 0xe7dde37b 0x70a07531 0xe25e06a2
-+ 0x3bbb7d30 0xaf41b085 0xe664f973 0xee2c7ab7
-+ 0xef8eb1b5 0xfba67f7d 0xd71568dc 0xbbff3339
-+ 0xdf49725d 0xbc0e7edc 0x5361e6d3 0xb0978c73
-+ 0x1320540a 0xa9843a06 0x34099c74 0x4bdddd23
-+ 0x18680496 0x44f9cc19 0x6de71a34 0xe4eae858
-+ 0x3349a819 0x28400571 0x10a55fe9 0x05672399
-+ 0xb376eadd 0xed4b1a35 0xe79d0a4f 0xca8d0601
-+ 0x78a7b066 0x8ea59a40 0x7be112a2 0xe99ea438
-+ 0x44bd9efa 0x6e5227a1 0x70325aef 0x777282e9
-+ 0xb579c189 0x4ee92bc9 0x0d0236dd 0xb57cf232
-+ 0xb815e184 0xd05823e4 0x0c9490b8 0x70a5fa56
-+ 0xdf0f178a 0x99d27374 0x1aba9e05 0x18378c3d
-+ 0x86991118 0x3a199a70 0x90b2a2cf 0x67a6923b
-+ 0x0975e5f2 0xf50fb0a3 0xbffbd67a 0xce6371e7
-+ 0x203564ef 0xb1d7a395 0x201cb1c4 0x30085e3c
-+ 0xfb2c66b4 0xf80ae969 0x1d407625 0x0bca1a0f
-+ 0xb62c078f 0x83efbf38 0xbd7b0a69 0x7d9bb66a
-+ 0x46b5c885 0xb256d753 0x0b5d008e 0x1756d5bf
-+ 0xa9ffdaf6 0x01231fcb 0x8c69e461 0xbb2ad661
-+ 0x29dee8f7 0xf1f23d56 0xd5e90ffa 0x48d9d93e
-+ 0x77b26e95 0x49c47953 0x7565da8e 0x41a6124a
-+ 0xfce69643 0x55f99554 0xa5501d6e 0x5738b726
-+ 0x4c989c96 0x93cbe27e 0x20ff3d38 0xf4787a09
-+ 0xfa3520e4 0x26b2dc11 0xb701c94b 0xcd8857ee
-+ 0xb4b07229 0x0bbcf1a7 0x3d31cd32 0x08ced413
-+ 0x3da04c1d 0x7bdf1787 0x344f510d 0x53a02e8e
-+ 0x7e295418 0xa5ed24b3 0x3a5a2c98 0x34947e44
-+ 0xb398bfcb 0x7c0ea498 0x18db3289 0xec646beb
-+ 0x2e8ed766 0x5aff9ee3 0x497dc7fa 0xa70c3be4
-+ 0xfc9306c4 0x729f532c 0xd87d61d0 0x635fadbd
-+ 0x1efb1234 0x66fdb543 0xf5b86d07 0x3a4836fd
-+ 0x9caf7dd3 0x8a9d9e5b 0x179529ac 0xa9a3fee8
-+ 0x4cfa4495 0x791b8b7a 0xc503fc2b 0x1e07d0e5
-+ 0x0561cfae 0xb5e7c403 0x0809744a 0xea84c654
-+ 0x23614fd6 0x23ae773f 0x545be2c5 0x3585b8b4
-+ 0xcad8b6ed 0x088a56c0 0x81054caf 0xecb13d9f
-+ 0x44bd49f7 0x90a3da4a 0xf4b04300 0x32a2b69f
-+ 0x44bed501 0x85cb54ef 0x85dde589 0xe410132b
-+ 0x1c2e41c7 0x3d28cc9b 0x4df948de 0xaa058c37
-+ 0xb82cf615 0xfa0574f8 0xd0391f5d 0xfb2b98b3
-+ 0x3ce5585d 0x80ca4d6a 0x4b138f75 0x721ccc65
-+ 0x496a3e37 0x4a8dd025 0x2d77b3db 0x65800ff3
-+ 0x1d2df03e 0xb4b12a59 0x4c6a5b9b 0x17413fda
-+ 0x4e938a09 0x7e3aa03a 0xf86cc8f3 0x972cd7b7
-+ 0x871849b1 0x0c0879d2 0xc7c652a9 0xe9531ae1
-+ 0x541142d9 0x4f731afa 0x9c43e538 0x866b695d
-+ 0x4a4c4076 0x1e8aa293 0x51bc1eaa 0x5f57d28a
-+ 0x142eb7f5 0x14096954 0xae0e9eb3 0xef732983
-+ 0x70187474 0x3569b88a 0xfd3a3c61 0x54f0e2d0
-+ 0x7afff032 0xa89cd23d 0x658114ec 0x434ccbc9
-+ 0xc25f33c7 0x1b6e9a7a 0xd97bd017 0x3b7489d7
-+ 0x67129c97 0x333ee180 0x04bf73ae 0x4731105f
-+ 0x09d589f9 0x7d5a67a3 0x3e8fcb8c 0x2090c536
-+ 0x14a623c0 0x21a247fb 0xe117bbe6 0xe98bbd1c
-+ 0x09e23674 0x02f09f22 0xba7f9f45 0xd18573b6
-+ 0xa6eb18fb 0xe01a7904 0xa8869f58 0x82ec81ee
-+ 0xf4549f1a 0xfa0f6085 0x1cf809e9 0xe603d078
-+ 0x13525306 0xd5611c7a 0x2c92b32b 0x5fdc0c0a
-+ 0x0b3aaced 0xa40059b7 0x27c42499 0xcc619db5
-+ 0x9f9b7841 0xfdca5eb2 0x2d3e833a 0x2830a6a0
-+ 0x4c81f3b0 0x3ec8a8bd 0x50b95605 0x33a9d515
-+ 0x7fe14795 0x4ff1d83d 0xef92fbfe 0x87f4faed
-+ 0x35d5fc69 0xd8764a49 0xec81abfe 0x634a2ed8
-+ 0x9635825a 0x0943624c 0x5eea8464 0x578e2344
-+ 0x551bd5af 0xca02915b 0xea419d8c 0x9d0fa00e
-+ 0xf3633f48 0xc6ad62ae 0x1eeef6ab 0x21ab106a
-+ 0xe325954d 0x60457916 0x6ac9168c 0xea8a9d6f
-+ 0x14772361 0x7630452f 0x8795e1de 0x21144d8d
-+ 0xe7996dd2 0x45aff64a 0xfa62c37f 0x3f5a04cf
-+ 0x250f988b 0x7985d243 0x1f717008 0x7908d22f
-+ 0x4fc0d5d5 0x856d9819 0xccfab84e 0x3fec2a74
-+ 0xe75c1af6 0xe2682ac3 0x2f08e560 0x7133d2a0
-+ 0x63e5fcca 0x3a17438f 0x9cb826c8 0x06a2f3cd
-+ 0x4bac2001 0x50596ba4 0xe74758d4 0x64d17e0a
-+ 0x08fc5b67 0xb0d62f6e 0x95eb8e15 0xd51bfa64
-+ 0x421c68b9 0xdd1526a8 0xfb7ea10e 0xab21193a
-+ 0x4b1186dc 0x77bbfd82 0x1ab08e9f 0x871659a5
-+ 0x1658fd5f 0xa04f322d 0xf50ed273 0xb8d411a7
-+ 0x8056489c 0xfbd858ae 0xd70f7d88 0x3c5cbc78
-+ 0xf53ec2be 0x1d2228e2 0x8b53aace 0x212454d9
-+ 0x76ea1d2e 0x9ca66373 0x9f6679c2 0x51c48b56
-+ 0x47348811 0x8abc0a27 0x60050980 0x5d290483
-+ 0x7ea8504f 0xde186466 0x91219d4c 0xa73144ed
-+ 0xb5f36fa4 0xa37912b8 0x02625bd3 0x3bc2d9ed
-+ 0x2e623844 0xa9a751af 0xf0ba18af 0x4433e06e
-+ 0xca7cda24 0x686c9163 0x86a437c1 0xf8c17120
-+ 0xed50542e 0x62b61fa1 0x600e47b6 0xdff86df8
-+ 0x77502dd5 0xea5d75ac 0x095a06e4 0xa18efafd
-+ 0xfbd01eaa 0x27a1cb0a 0x3dfcab8e 0x07be7250
-+ 0x086cb680 0x2c1ddcf4 0x6fa79784 0xcd874edb
-+ 0xa383d520 0xa5c0d1cd 0x2e09cd9a 0x34d645c4
-+ 0xf6b9b98d 0xe8e80ab0 0x39b78c60 0x6098b6f2
-+ 0xc3c13e53 0x88c9fd83 0x60c9e766 0xf49c4c2d
-+ 0x79e3d3d3 0xbfade7d5 0x6ba57dc1 0x3069e3ad
-+ 0x59632e2b 0xb86e871e 0x2dd63287 0x9704b283
-+ 0x343a6cb3 0x37d7950d 0x283f262d 0xd49d5f75
-+ 0xdacc49b7 0x5952e045 0xc0fefa19 0x69effce3
-+ 0x5b2a3c0b 0x3757339f 0x18584f8a 0x77a80760
-+ 0x5fcdadc0 0xc9b4df80 0xfa521be0 0xbcfc8ecb
-+ 0xfd3f8eb8 0xbee4739a 0x139caf94 0xbdea1cd7
-+ 0xab158240 0x233fd8dc 0x8ec63274 0x34eee6d8
-+ 0x4603b2f8 0xae544fc5 0xcd444551 0x2b2b349a
-+ 0x0a562524 0xb2e02518 0x577b1125 0x8b3c1ff9
-+ 0xfd27d88c 0x2ad77d04 0x1f82a54e 0x20254fdc
-+ 0xee8e63cf 0x8df3fa2f 0x9ffc7c43 0x421ae12f
-+ 0x9b166441 0xb74a5a4f 0xdad0511e 0x0a8ee5e9
-+ 0x8fe86041 0x37ef90ea 0x3fcf8380 0x87288691
-+ 0x384b8b8a 0x98d8a45f 0x995443d7 0x6c617236
-+ 0x9a40f76f 0x9f30733f 0xfdbf3927 0x7b4c0281
-+ 0x9e87e64f 0x9802938c 0x65f9de31 0x829c3eda
-+ 0x0a1d2f4a 0x22e0e854 0x30045b70 0xbf84a44f
-+ 0xc2c30b57 0x47c5ff90 0xaea87e93 0x99c69ae5
-+ 0x1080e89f 0xc2896e80 0x09ba0cb2 0xd16ee263
-+ 0xe05337b0 0xef1d8359 0xc1d4b102 0x08620117
-+ 0x2e4ab2bf 0x05dc3af8 0xc7ab866b 0xeee05983
-+ 0xd0a00c19 0x96996791 0x75ac6042 0x29001ada
-+ 0x13440a23 0x2b1eca42 0x4cddfd68 0x81a98384
-+ 0x6bcda226 0xa8594443 0x92f26e53 0x434de4ec
-+ 0x07596ee2 0x4c8ea6ed 0x5596054d 0xaffe0ef4
-+ 0x6dc1ab64 0x20bc006b 0xad4e3933 0xe6df0d3f
-+ 0xfb3ca9ee 0xc2895a4e 0x8fed0d43 0xa5ed7985
-+ 0xc364f083 0xc397a806 0x7b651ff9 0x1d7e22e5
-+ 0xfd02f57d 0x5f16a429 0x8612177a 0xd36b8983
-+ 0xd87b0303 0xeaa632b0 0x57dff2b2 0x19772dd0
-+ 0x51317bfc 0x28404b1f 0x9e35d818 0x9c771bb7
-+ 0x6d42a5c1 0xa6030578 0x9c844d5f 0x95d5eb7f
-+ 0xdf15f5ec 0xf0f8c86e 0xf8ebfd20 0xae32d9b5
-+ 0x4ce2b066 0x776f0149 0xda8a429f 0x0e895a79
-+ 0xbe62c881 0xf9c051d8 0xcaa48f97 0x9e8dcb1b
-+ 0x69cafc21 0x411f1bff 0x4f4d71dd 0x102cf709
-+ 0x974ebe53 0x7373aea6 0xef2a7ec1 0xedabaccc
-+ 0xdac969c4 0xe010b562 0xb6880570 0xa7a7f5d4
-+ 0x3c6464f2 0x96dea774 0x1614a588 0x06074080
-+ 0xb37304f0 0x99da7dda 0xd3e36214 0xb27b7cae
-+ 0xb4cef0b3 0xa435dc77 0x9d1c1a15 0x616993f4
-+ 0xb8a5ec8f 0xdce1ff5a 0xaaea14c4 0xa5d2172f
-+ 0x90c8c636 0x49c0b81e 0xff9db895 0x4252b336
-+ 0xd420b5ce 0x87b35be4 0xae32bda2 0x441092d9
-+ 0x321e8583 0x7d863719 0x3c888147 0x3f2bb9f6
-+ 0xd1daf5f1 0x682f2ffe 0xae62e280 0xcf8f928a
-+ 0x4a7237f5 0x6f3a55af 0xb91dba98 0x9b83b723
-+ 0x0e857ed8 0xd5ac567d 0xaf8bf791 0x23f8269a
-+ 0xe369638f 0x6a88edb1 0x5ff0be07 0x5c02b513
-+ 0x7d22f89e 0x2f865c08 0x9cc0d56e 0x31c87205
-+ 0x420508f2 0x95a21602 0x04d838e3 0x353353e8
-+ 0x7ca1feb6 0x61c6f7dc 0xf78a68eb 0x918f2ac1
-+ 0x413037a4 0x09692d1c 0xc8eceb54 0xb1bf975a
-+ 0x2ab63552 0x467bceeb 0x408bf024 0xeaed2b31
-+ 0x3255158b 0x8d9c6617 0xe450350f 0x615cf5f3
-+ 0x1a7fd744 0x27a0da59 0x43298211 0x77392298
-+ 0x9511e81a 0x08a2c2dc 0x3d6f1113 0x967e6586
-+ 0xd1726b35 0xb9292da6 0xaa6f8ad4 0x0f13b47f
-+ 0x34b96cea 0xebd9487d 0xfe533d60 0x41bcdc60
-+ 0x364c8c79 0x32be8bb8 0x1395ead9 0x9e85e474
-+ 0x146b6fbc 0xc93267cf 0xcdda98d4 0xccfb2835
-+ 0xe779dbd5 0xf9288237 0x2073e129 0x16fe4ab8
-+ 0x34ca576d 0xac313eb7 0x5deb3b4d 0x1727510b
-+ 0xc168a414 0x332cd921 0xe38e8123 0x9a2c1aef
-+ 0x80f5d1d9 0x7c88c923 0x8af17577 0x59ae1408
-+ 0xffa5e565 0xb418ab13 0xdd6376aa 0x45cd70d9
-+ 0x3c3a06a2 0xbc555669 0x34d1fc08 0xc2aa934a
-+ 0x385416e2 0x91ceeadb 0xe06c9cef 0x0394dbd4
-+ 0x43e7c657 0x296d7621 0x55dafcba 0x808b836b
-+ 0x61c41f0c 0xd9689bc5 0x3a531ffd 0x8417ed30
-+ 0x3f3f8616 0x641eb4a9 0x24964006 0xe8d2612a
-+ 0x3b916d7c 0x5603319f 0x29007523 0xc9c7dc1c
-+ 0xd1f7212e 0x22ac1932 0x05c39a5a 0xd55081ce
-+ 0x589ae996 0xa998fcbe 0xd8df5512 0xef7d7a01
-+ >;
-diff -ruN u-boot-2015.01-rc3/arch/x86/dts/microcode/m12306a9_0000001b.dtsi u-boot/arch/x86/dts/microcode/m12306a9_0000001b.dtsi
---- u-boot-2015.01-rc3/arch/x86/dts/microcode/m12306a9_0000001b.dtsi 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/dts/microcode/m12306a9_0000001b.dtsi 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,814 @@
-+/*
-+ * Copyright (c) <1995-2014>, Intel Corporation.
-+ * All rights reserved.
-+ * Redistribution. Redistribution and use in binary form, without modification, are
-+ * permitted provided that the following conditions are met:
-+ * .Redistributions must reproduce the above copyright notice and the following
-+ * disclaimer in the documentation and/or other materials provided with the
-+ * distribution.
-+ * .Neither the name of Intel Corporation nor the names of its suppliers may be used
-+ * to endorse or promote products derived from this software without specific prior
-+ * written permission.
-+ * .No reverse engineering, decompilation, or disassembly of this software is
-+ * permitted.
-+ * ."Binary form" includes any format commonly used for electronic conveyance
-+ * which is a reversible, bit-exact translation of binary representation to ASCII or
-+ * ISO text, for example, "uuencode."
-+ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
-+ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
-+ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ---
-+ * This is a device tree fragment. Use #include to add these properties to a
-+ * node.
-+ */
-+
-+compatible = "intel,microcode";
-+intel,header-version = <1>;
-+intel,update-revision = <0x1b>;
-+intel,date-code = <0x5292014>;
-+intel,processor-signature = <0x306a9>;
-+intel,checksum = <0x579ae07a>;
-+intel,loader-revision = <1>;
-+intel,processor-flags = <0x12>;
-+
-+/* The first 48-bytes are the public header which repeats the above data */
-+data = <
-+ 0x01000000 0x1b000000 0x14202905 0xa9060300
-+ 0x7ae09a57 0x01000000 0x12000000 0xd02f0000
-+ 0x00300000 0x00000000 0x00000000 0x00000000
-+ 0x00000000 0xa1000000 0x01000200 0x1b000000
-+ 0x00000000 0x00000000 0x16051420 0x610b0000
-+ 0x01000000 0xa9060300 0x00000000 0x00000000
-+ 0x00000000 0x00000000 0x00000000 0x00000000
-+ 0x00000000 0x00000000 0x00000000 0x00000000
-+ 0x00000000 0x00000000 0x00000000 0x00000000
-+ 0xc2b13ad8 0x6ce74fea 0xd364ad12 0xf6404a69
-+ 0xc89041e4 0x217fa2f6 0x6ff6e43f 0x79cde4eb
-+ 0xdb01345a 0xceecca42 0x5ee7d8b4 0x24afdbe6
-+ 0x5fb36178 0xbc17d76b 0x31b7b923 0xc81aec82
-+ 0x647b3320 0xf1db9653 0xff3b9759 0xe9c74b72
-+ 0x3b193752 0xc147860b 0x160e0d6a 0x5bdb9dbf
-+ 0x1ccce2ac 0x387670ad 0x2f106f05 0xf8607ea3
-+ 0x42562576 0x30e086fb 0x409a06b8 0xf1957736
-+ 0x5eb03f65 0xad147fab 0xe1a8e8b6 0x208d59d2
-+ 0x683fba2e 0xf172b378 0xf8138dba 0x61e81d1f
-+ 0xd551f997 0x28c79780 0x04f9db27 0xa80679b9
-+ 0xaca4e7ff 0x6876944b 0x26d7dbc1 0x77f7dc2a
-+ 0xf0bcb163 0x1b2a8e81 0x7b90aa49 0x8d5eaf2f
-+ 0x522384ae 0xae7f7082 0x412ba10a 0x1ce1baa0
-+ 0x478c29b4 0x9c09b4d2 0xf225f64f 0xd43026cd
-+ 0x81098579 0x7df5db05 0xa5815bb0 0xc73ee756
-+ 0x9738cb95 0xa5bd62e2 0x88e2c6b2 0x778e7fcb
-+ 0xd3bdb872 0x9404403f 0x5be6ad63 0x71dc4abc
-+ 0x11000000 0xd350099c 0x242d0996 0x1a4ddff8
-+ 0xd7f1f03b 0x77590eb8 0x45c3ad79 0x3b714d23
-+ 0xa85ba322 0x31851c5a 0x540fe0ce 0x38692bd6
-+ 0xe3d9927b 0xb33428b5 0xcf0ac8d2 0xd3646604
-+ 0xca88adc7 0x8afc41c8 0x721432b3 0x8fd19454
-+ 0x26344e0d 0x3acf6c28 0xbda18c21 0x526d52ac
-+ 0xf8d37e15 0x09305e37 0xf6907871 0xdb56cc21
-+ 0x6802cccc 0x6693c8a3 0x0f4dbe32 0x0d924103
-+ 0xee9242a7 0x5f867a13 0x2f65a246 0x6b35ad05
-+ 0x39fb7da1 0xd69cb7d8 0x45869424 0x4768b466
-+ 0xe3ace365 0xa85eea7c 0xa59939d9 0x2ae32fb9
-+ 0xa20b1559 0x8865f3d3 0xbe02e023 0x4199575b
-+ 0x0c43089a 0x0d57b287 0xd37544ad 0xcd4573b4
-+ 0xa96b7485 0x05b67259 0x117414ca 0x2ba24577
-+ 0x439db14d 0xf82c5833 0x54ec9806 0xf8282306
-+ 0x1de7d3cf 0xf7a76dc2 0xcd897f60 0x0bb1decd
-+ 0xae58efb0 0x743c07af 0x48adffb5 0x262260e7
-+ 0xaa9fa071 0x9a9ef7c0 0x98e861eb 0x14a48871
-+ 0x0b4c3292 0xad851820 0xe0f7f45c 0xd71366c5
-+ 0xc63a2f01 0xd02f23c6 0x49645eb3 0x2365fe48
-+ 0x44817f1f 0x576ee68e 0x396b6134 0xd9fc4857
-+ 0x9a771368 0xda5f2693 0x6ad30ec2 0xc8d08171
-+ 0xe40bcd42 0xf82291a8 0x3094a8b1 0xd3edffa3
-+ 0x5d5fb5e6 0x93802a7e 0xdf0ff376 0x09ebeae6
-+ 0x35091690 0xe938ec68 0xd203065b 0xcf2e8172
-+ 0x85282b27 0xe59fb64d 0x4b2ad981 0xeb5dde75
-+ 0xc07eac26 0xa78c969e 0x74165d84 0x61c4cfc8
-+ 0x740452f3 0xe5f6435e 0xb712e157 0xac49215d
-+ 0x5be5e61b 0x09f46a94 0xde5cd48d 0xe3ed6b11
-+ 0x2e8173de 0xabb6759b 0x46ffc47e 0x0cd84607
-+ 0x6046c26d 0x19356116 0xe1da098e 0x8e1bbe9f
-+ 0x5c8d6c20 0xa17cfe55 0x101a1f91 0xd64aef70
-+ 0xef2e7b34 0xbb428dc4 0xf2252a3d 0x8ab3f6c0
-+ 0x161db4ef 0xfdbf4f9c 0xb5bf9f19 0x414ea8b5
-+ 0xc3db5422 0xfc3934f2 0x635a8253 0x86260b8c
-+ 0xa4c0e59a 0xa45d24cd 0x4a25da59 0x7a568be1
-+ 0x4ae3587e 0xbc77a3e8 0x70723657 0x9abcabaf
-+ 0xe0a95d4e 0x25519f22 0x3ee1d340 0x2ddc2ca8
-+ 0x04ae20c3 0xc143f7c1 0x4a79e4d6 0x19377b64
-+ 0x2ab0d3f5 0xd3f19f6d 0xc8dc880e 0xf577dab6
-+ 0x69b6ac46 0x37d4af3b 0x0999bc85 0x3d9fbbf5
-+ 0xb9387ac9 0xc148824f 0x4d11f5f7 0x1ff4594b
-+ 0x59beb5b7 0x29474f52 0x68e6b2b9 0x4b60966e
-+ 0x5e40a736 0xdeff5ef2 0xe623bbc1 0x50407021
-+ 0x34ec34ec 0x131b3d57 0x628bda97 0x58152b10
-+ 0xdd830410 0xf953e469 0xea4c8d25 0xd79d7ba0
-+ 0x7a4da4f4 0x887d6841 0x7ff1e41f 0xdeffc5dd
-+ 0x8354cb26 0xb133716f 0xae73deaa 0x292e200b
-+ 0x9a9400f9 0x7a5d21c3 0x590d4799 0x1333b4a3
-+ 0x782bbe3f 0x314fcb2c 0x475a1cca 0x4cd07c7f
-+ 0x7a69a5fe 0xaef5a52a 0x0e9957f3 0xf7d86f6b
-+ 0xd0983d0b 0xdffd48b9 0xbeea1e9c 0x19de4c7a
-+ 0x46487695 0x5719e4e5 0x6dab39ac 0x856bf2bb
-+ 0xc0644339 0xe60e92ee 0xc328b5e5 0x2d0c31e9
-+ 0xeb73f1f4 0x7b577248 0x361159ba 0xd0f7002b
-+ 0x5fa816ae 0x11ace78c 0xab62e0da 0xc924891a
-+ 0x1d5800e7 0x4f90e04a 0x21374c9b 0xa3350e64
-+ 0xcb9c1901 0xcc350b3d 0x5c3e5932 0x3cc6261d
-+ 0xc3b54acc 0x849cf200 0x1425fad1 0xb3a479d9
-+ 0xfd4dfda8 0x62973133 0xdd528736 0xd7e62e0e
-+ 0x6921e1d6 0x7e41d7f0 0x74397b86 0xf739079a
-+ 0x4ff82d1b 0x38b6fcdc 0xb20e36bb 0x0cef9b7d
-+ 0xa737fdf3 0x1d18ef1a 0xc2c5dda1 0xdb16c5e7
-+ 0xbfa99b2a 0xf83f2c10 0x883c8183 0xad10014d
-+ 0xcf9f6321 0x5e0c079c 0x3ddd3d29 0x306325e0
-+ 0xebdaff05 0xa88741be 0x181fbf20 0xa58a3a1c
-+ 0x1f7c7165 0x7f5f5141 0x12576e50 0x9db22976
-+ 0xd1fbe204 0x6ca2025a 0x10c15009 0x920649fa
-+ 0xf42d3035 0x79efbc73 0xad2bde6c 0xb4e317ab
-+ 0x1f7358be 0x447d850f 0x9bb2d1ee 0x3545cea3
-+ 0x78eff6bc 0xaa86e51f 0x6383ada5 0x0c969d05
-+ 0xadd720e6 0x92f77e04 0xda58e24d 0x401bd323
-+ 0xdac090fd 0x9dc372b2 0x86726956 0xc508fde7
-+ 0x20ec1cf1 0x29fdb66a 0xa3f7e3b2 0x5ffa58ac
-+ 0x653c0106 0xf0d01026 0x55feffa1 0x661399b6
-+ 0x5b23998d 0x91add159 0xbf917f02 0x87ef6fee
-+ 0x64c4d653 0xbfadf48f 0x23f3ebcd 0x67869030
-+ 0x3b90b7ae 0x19efc2a4 0x26596a35 0xaaa5fcf9
-+ 0x5a14fd14 0xebeb9c9f 0x72224625 0x3a2c0009
-+ 0xbe5a09af 0x5aad7b74 0x7d92261a 0x8bd722bb
-+ 0xfff48488 0x0379b991 0x750cdaf8 0x83d3ec67
-+ 0x2f582115 0xfdeca132 0x889817f9 0x2bcccbb5
-+ 0x58107ba4 0xb57e016c 0xbbc45c80 0x5f14439f
-+ 0x6e71c73c 0x5e18e93f 0x43c07fca 0x6d49bc66
-+ 0x6641a788 0x234f48cc 0x9e18222c 0x86efa566
-+ 0x450ad39c 0xbc3ef112 0x98e7d17c 0x5334659e
-+ 0x9919cb9c 0x9fb4f0c5 0x2ea90893 0xc70453a6
-+ 0xe83cc486 0x454da884 0x4cba0511 0xfb83f2aa
-+ 0x0cf7ec27 0x20ef41bb 0x08355d0e 0x732798dc
-+ 0x1689d337 0x61bf955b 0xa10d3f79 0x05fe9c6a
-+ 0x1cbbc776 0x42e00326 0xf92509f4 0x71488be8
-+ 0x3d92da26 0x839acf18 0x6dae5781 0xeecfcc85
-+ 0xc63c0f72 0xcd79f887 0x677dd4c5 0x167c779a
-+ 0x3359b45d 0x48f974f6 0xbd7debdb 0xd57d5935
-+ 0x41beb132 0x1574e273 0x417a8fb4 0x46ca9d85
-+ 0x859f3434 0x7cd1675e 0x1fb4e8b2 0xc55de45b
-+ 0x4be8afa5 0x193c1260 0xd4225590 0x255fb988
-+ 0xde63caee 0x96108c66 0xacc2b48a 0xad2992d2
-+ 0xdd4cf4ad 0x0f6f5246 0xaf20d77d 0xf1c81d1f
-+ 0x0db57bac 0xbb39c168 0xb78944a1 0x4ea55714
-+ 0x0bb537be 0x5824ab81 0xdb9345fe 0xab0606d4
-+ 0x12a8b9c2 0x90001c30 0x12c7197e 0x603cae66
-+ 0xe2cb6b47 0xab0f94ba 0x28091fbd 0xb79d112d
-+ 0xc53a69b4 0x7de8c3bd 0x4aee880f 0x5a5dd399
-+ 0x850105e4 0x366d8714 0x4da7971b 0xc3a0013f
-+ 0xfbc2461e 0x65954a32 0x4c8f348e 0x3ddf0054
-+ 0xc615725a 0x3021e167 0x4a88ec0c 0xd69c44b1
-+ 0xb21cd2b1 0x08e16586 0x90f02d12 0x554afff3
-+ 0x65067d72 0x8c310d6a 0xd62ab40d 0x443bda33
-+ 0xb6eac5c1 0xd0cd461e 0xaf200f23 0x41fd1b8e
-+ 0x84e74a66 0x15b0bc4a 0x13fb1a4e 0xb36bf139
-+ 0xeeaa0c1c 0xa91d6fab 0x64c99859 0xc049d5ae
-+ 0x38921c4f 0x92b2f269 0x5c867fd7 0x41bd4d62
-+ 0x70009a4c 0x85a37897 0xe228af8e 0x9ef4f31e
-+ 0x891bbb42 0x3c09f291 0x32c29325 0x88f9ee6c
-+ 0x81a0bc38 0xfef31889 0x8d2e3f79 0xc5e405f7
-+ 0xb78e4127 0x3d61f392 0x3427d259 0x9f0bb662
-+ 0xfe6ffb44 0x57e1e8c2 0xd4abd164 0xd0449914
-+ 0x5bd5fe60 0x873601a5 0x0b07ae28 0xf4aac893
-+ 0xb9c8f9f5 0xe3a514ed 0x9da193c2 0x55ebeca0
-+ 0xa9d8f9bd 0x0a37dcc7 0x3f1d9f15 0x0bc645d8
-+ 0xb808085a 0xc79b0f4e 0x0286eafc 0xefc87a56
-+ 0xf1225ab8 0x58ac6a9c 0x9227ea3c 0x82deed0f
-+ 0xff0f8edb 0x3c29a1b6 0x6d777dae 0xbeeee7d2
-+ 0x0bdca157 0xf8d9d18d 0x52fda265 0x630da310
-+ 0x4f660e86 0x1c985fc0 0x68f1c993 0xf4ae63bf
-+ 0x3ec5373e 0xf6a10f89 0x2b19bd61 0x8aab04b4
-+ 0x75653336 0x4be6689f 0xc2631812 0xc6d386f4
-+ 0x93a6268a 0x4e5851ad 0xc2b47fdd 0x5acbd226
-+ 0xd2aaf25f 0xbe83081c 0xe57eb32e 0x00debc3c
-+ 0xcd8d7dbe 0x7cf67994 0xba17c779 0x34c19529
-+ 0x5cf29a31 0xe10b7d8e 0x7b116896 0xf702de15
-+ 0x6ee2e8cd 0x2f3a12d0 0x0e2a4666 0xbc1333e7
-+ 0x2b653c7f 0x36e282a5 0x0ca0544a 0x2255b148
-+ 0x5e413d5b 0x0fc88547 0x81e3073f 0xbcef6576
-+ 0x12b29e93 0x233bef85 0xd41790ed 0x4f4dbf15
-+ 0x20dea3d6 0x25f86504 0xb13177fb 0xee626fbb
-+ 0x2f7529e3 0x6157578f 0xeee068f6 0xc97c5909
-+ 0x053c28cb 0x6f540d47 0x692bb599 0x7004243d
-+ 0x1c5620cd 0x0ca53749 0x9d7d6a4b 0xb8e504f7
-+ 0xdd138f32 0x4d2fd525 0x676904b1 0x67b90411
-+ 0x6777ede4 0xc1fbe02f 0xd7eb61fe 0x1c62f909
-+ 0x91cfdb29 0x293a8d72 0x4475e4dc 0xba9d955f
-+ 0x5413cb0b 0x952694f7 0x3b8eede3 0x33f1f6cc
-+ 0x61c2604a 0x244f8403 0x862316a5 0x2e0387fc
-+ 0xb3b3c699 0x418f5b0b 0x89a49abb 0x6c325320
-+ 0xa952f0c0 0x72454ccd 0xaa272d96 0xf05e80d4
-+ 0x1dceb03a 0xdb00d312 0x96cbcca4 0xc87c31f7
-+ 0x96b17422 0xdba12c7d 0xedaac717 0x99b1da89
-+ 0x48f3e07e 0xbace3088 0x71937740 0xd754a585
-+ 0x31784510 0x36d08e4c 0x4e8e2396 0x081fe566
-+ 0x0cd2092c 0xec932481 0xfae11d02 0xcb3b8609
-+ 0xe20559f2 0xa2330b46 0x2beec857 0x86911540
-+ 0x5e8e1895 0x4f42f3cf 0x8e32bede 0x78285f4c
-+ 0xaf267610 0x9dc86091 0x6adf9b99 0xfc91da24
-+ 0xc987356d 0x78f260f0 0x9cc6f796 0x1d6aa013
-+ 0x5f1922de 0x54d065e8 0x8a7c3cea 0x13768df3
-+ 0x4e8858b2 0x712b5b8d 0x0b64c3be 0x3845ef6a
-+ 0xff77b842 0x83a497a5 0x77f15aaf 0xccfc6df7
-+ 0x20084d31 0xaacdde0d 0x4059b446 0xb940b3a7
-+ 0x3fa88d6f 0x3162ec66 0x43cc767b 0x2a2a6916
-+ 0xd0dea02d 0x5b9f11a1 0xec36c7a9 0x6d7eb6ce
-+ 0x4506fc1a 0x1c3e362e 0x9e2b0f99 0x547e6ba7
-+ 0x6b8169ea 0xbd89401a 0x2cf5ea6a 0x100e6249
-+ 0x47ef40de 0x063a0b33 0xb1f49499 0x3026e75d
-+ 0x3b6d951b 0x6212fd9a 0x5073aa23 0x9bd609b2
-+ 0x760cf7bf 0xe6766d03 0xff811dac 0xa461d069
-+ 0xf40e74b3 0xec113577 0xa2cf15e0 0x6f43a20a
-+ 0x43f52321 0x96896eb8 0x480c1129 0x35190a4d
-+ 0x29a80a08 0x8ce4dd2c 0xf4b40d21 0x2324ef9a
-+ 0xf3f2b54d 0x7a0cc79e 0x3e9d973e 0x2d28dd0a
-+ 0x1a5e9aae 0x5abb6fab 0x215bade0 0x39e678c3
-+ 0xd6543c64 0x1652e0d4 0xca2f5303 0x0a6879bf
-+ 0x24841561 0x05c559e7 0xa1ac6c48 0x3fc52191
-+ 0x29527695 0xb977ce60 0x04589311 0xaff7180b
-+ 0xdeb08866 0xd62d8f6a 0xa6f62306 0xfdef1235
-+ 0x1946ad8d 0x1d49fa21 0xac486c1e 0x3ca80491
-+ 0xba8c2a76 0x06ce9ac6 0xcbfbc465 0x675c4ada
-+ 0x1eb6b108 0x27d03a7a 0x606144e6 0x2eedb163
-+ 0x64d8d1b7 0xe7695fde 0x75d593a5 0xe7f00f68
-+ 0xc3c45a5a 0x522c4164 0x37833c3d 0xddfda19e
-+ 0xd7b9f984 0x77e6ea85 0xd148df03 0x89989155
-+ 0x80fd8f07 0x3adafce3 0xf4e07aa6 0x6ea417b4
-+ 0xd1732fad 0xd13cba8a 0x01729b17 0xb9e666be
-+ 0x48addea4 0xffb3a560 0x4a96d730 0x0349777c
-+ 0xbf355e6a 0xb5055554 0x22442c5e 0xd8bda1b4
-+ 0xb0a088ab 0xef18b9a6 0x11ecc51d 0xd59247f1
-+ 0xf86fe339 0x17752dba 0x0bfacac1 0xdef25155
-+ 0x035b4275 0x02a3f293 0x8466a5bc 0xf376864f
-+ 0x04265d7d 0xc6fc5aa3 0x36adf7ec 0x4e16af5b
-+ 0xe3b28d5a 0xa49c6535 0x2b05f03b 0x46d5d914
-+ 0xfcae58a0 0xda644349 0x656d72c0 0x75d47095
-+ 0x302a9fad 0x4e245aaf 0xe2a3e852 0xa9b73076
-+ 0x8d9a2469 0xe7c05607 0x1c17b4b3 0xc2e63302
-+ 0x49fa365d 0xabf1f5dd 0xc850b090 0xdced47ac
-+ 0xd60b15d7 0xb25efb14 0x33f9a3af 0xd011cc8f
-+ 0xf0414eaf 0xff212e84 0x9e2fbd61 0xf6636285
-+ 0xd892696a 0x6d9ffc34 0x253ad380 0xffb7ed45
-+ 0xaae31520 0xadba81d1 0x7f1e41bf 0xcd7e1eb7
-+ 0x9dabd0e9 0x5de91eeb 0xe9fa68ed 0x3fae0c6a
-+ 0x6da21b40 0xac743c3a 0x19228523 0xf5098069
-+ 0xf647fe8d 0x95666621 0xa2a3613d 0xe6278031
-+ 0x6901cfe4 0x3bf132be 0xc3314ee8 0x5b8261b8
-+ 0x9b724149 0xd0838d83 0xb0d05c76 0x57295707
-+ 0xcb11fd8f 0xfdce9b20 0x346449b6 0xe8b44745
-+ 0xc0784ff6 0xe6083a3f 0xb0b87142 0xd2df2210
-+ 0x7b9dc719 0x961585df 0x359390ec 0x0d40e1f0
-+ 0x56436a52 0x8ccb0d80 0x78066e70 0xcfd04ac4
-+ 0xd850a6a2 0x00612831 0x19e74acb 0x5a80989e
-+ 0x0d7b151c 0xca9bee4e 0x2fea9d99 0xfdd7ec3c
-+ 0x3a73b4e7 0xa70068d1 0x38aff576 0x4c861c14
-+ 0x2e23b093 0x0e429806 0x8cce23dd 0xb0ce104f
-+ 0x1684bf8d 0xb2756213 0xa64c594a 0xdd8ee144
-+ 0xda5316cc 0x76dc877f 0xa1c5fe35 0xb5e04383
-+ 0xc9e10000 0x8ac58408 0xf6d7e781 0xbda6cdc5
-+ 0x81517c56 0xdee2ba90 0x3cbfc247 0x4c84887c
-+ 0xa722c632 0x4767a4b3 0xe83b79a3 0x7f100150
-+ 0x1074198a 0x220260db 0x1c940f4a 0x92c42619
-+ 0x56dc9f64 0x1c0f7eef 0x3694f4e8 0x5b4b63d0
-+ 0xe784afaf 0xcdcdb039 0xf7040a88 0x47f2d84b
-+ 0x143a94b5 0xf68f4fab 0xf6640462 0x3cd6b1c1
-+ 0x7fbe0e60 0x700ee673 0x030e877f 0x60779cb8
-+ 0xddb6933d 0xe46f377f 0x9f9c43c9 0xce0f0d58
-+ 0xe6bf42a4 0xae09f51b 0x295e8cf0 0x140df2b9
-+ 0xfb04c209 0xb6d46f7b 0xa86e0c91 0x64fc624d
-+ 0xa7a8760d 0xdac844b4 0xbe1491b0 0xad480684
-+ 0xea874ca4 0x3535e483 0xd49365c9 0x83f2c050
-+ 0x05ec206f 0x7fe3b010 0xb72aadbf 0x40b3a286
-+ 0xafe395a8 0x3506d4af 0x9c4e33e7 0x0259eba9
-+ 0x0daecf5c 0x264c008c 0x898bdada 0x0f3ac833
-+ 0x7ef5f3f8 0x41934050 0xc3bda261 0xab624dd0
-+ 0x5d93609b 0x495a5f1f 0x34119efb 0x3bfd15fd
-+ 0x49255da9 0x3ab2d260 0x15ce2006 0xd466d454
-+ 0x3d052ca5 0x567977cc 0x7f8b8657 0xd9b34f42
-+ 0x36c65ff5 0x5f96bffb 0x2d32daf1 0xb301cf05
-+ 0x933435e1 0x316fb1ae 0x48be2982 0x657c3286
-+ 0x1916c189 0xa3a030b5 0xe4c7bce9 0x6a762931
-+ 0x1e90df3b 0xe9084ef0 0x1236cfe1 0x7239326c
-+ 0x29bd4dfe 0xaa01cc46 0x93e514ef 0x4e376f6d
-+ 0x14087975 0x9cdad6f9 0x86b31bd6 0x2c206281
-+ 0xe178b367 0x4943f013 0x9f97c9dd 0xe848fb0d
-+ 0x7d19e49e 0xde4d9b1c 0xee7f552b 0xadea7634
-+ 0x605ab7c5 0xef66b062 0xaf369aec 0x39a96463
-+ 0xb39ed4e0 0xf4c38bbd 0x48565c84 0xcb4ccad7
-+ 0x37b656c4 0xa5291b2c 0xba05d037 0x0027ff97
-+ 0xec2034c9 0xa19abaff 0x99dd50bb 0x44bd5f0b
-+ 0x8cc4193d 0xe1dca3f4 0xae2896c9 0x992105a5
-+ 0x46b04aed 0x3ca454cd 0x9a0e86a3 0xfdb3702e
-+ 0xf2ddfd7c 0x6b7ca41e 0xe49f2227 0x4839351f
-+ 0x201f1173 0xc9af9d40 0x7942ef65 0xf35e5867
-+ 0xe5358390 0x0beff1a6 0xd057a81e 0x89830387
-+ 0xe496a246 0x45007e0b 0x62c34ed5 0xc2170342
-+ 0xa095780e 0x00682a8d 0xfab7e24d 0x207cb6f9
-+ 0x7d5c8058 0xb0164454 0xee8b6d44 0x0aa01190
-+ 0x70637e84 0x1268c1cb 0xf7a1eb80 0xbe90b153
-+ 0xcdc765f5 0x5841d605 0x00141f5d 0x475f8d3a
-+ 0xff60a6f1 0x5f7a2e3a 0x30d3f150 0xd9a22f7e
-+ 0xdded3241 0xfb05ea5e 0x4093fd88 0xb11f5a9e
-+ 0xf1b36594 0xc7579059 0x7f66c5e6 0x8fdb1095
-+ 0x46ff7f62 0x70925647 0x207287e3 0x6bddfe5d
-+ 0x240fb596 0xc91784fd 0x28acd7f8 0x7cfbc9da
-+ 0x2d6b3cc8 0xf8e9aaf5 0x489616b8 0x9ed70056
-+ 0x586bca94 0x6a95971e 0xa2238b5e 0xc9a06325
-+ 0xb90882a9 0xb5b3ffab 0xae4b2beb 0x5aa0ee34
-+ 0x52e23123 0x9a019e1c 0x84b0f00c 0xba2cf495
-+ 0xca4108dc 0x9272b0e7 0x760b209d 0x3e294274
-+ 0xb8f0316a 0xb666af5b 0xcf436e91 0x365dd253
-+ 0xbf11262e 0xdfa3f8ee 0xd6e0ab96 0xd8a639f8
-+ 0xcba8b31f 0x58940e1a 0xa4bf5e3a 0x7f8cec5e
-+ 0xb5ec87d4 0xb7924503 0xe2bff3a9 0xc7ec4445
-+ 0x1e94324c 0xccf28ba8 0x2294b594 0xad297087
-+ 0x18624369 0xa017851f 0xc635302f 0x802becac
-+ 0xe631eaeb 0x386589dc 0x780823c4 0x7b989c1d
-+ 0x94554d93 0xfc22d343 0xb8edbd0e 0x8bc08005
-+ 0x998a234e 0x507d3976 0xf1f9833c 0x522a2971
-+ 0x2765433f 0xe1ef356f 0xd45d5fd5 0x8d3294d3
-+ 0xabcffdba 0x9b7a6338 0x2f261e1f 0x891fdbd0
-+ 0x67008f6c 0x23d96866 0x057410ec 0x2f360684
-+ 0x8380c618 0xc968f3ae 0x91ac868d 0xdb5cc503
-+ 0xf092b320 0x73ef35c1 0x0fada995 0x56316744
-+ 0xde2290fc 0x7070dee5 0xcf1cd6ab 0xf1a47253
-+ 0x2c53b495 0x8952b433 0xa5b47637 0x9dfe09ae
-+ 0x2fb36206 0xcb1dec3f 0xec188994 0x10407824
-+ 0x91f27ffe 0xd461edb0 0xc3779ae4 0xe3f9bede
-+ 0x183a107a 0x0122654f 0xe319bba5 0xe75c33cc
-+ 0xc657ea24 0xe5490f98 0x653d01c7 0xce09c546
-+ 0x631ea29b 0x81278443 0x0cd4dd3c 0x6b7da4ff
-+ 0xacf1363c 0x563ed879 0xe8420e5b 0x43adcc25
-+ 0xc6ff7dd8 0x21e26910 0xa4b4f3be 0xaea31be5
-+ 0xc241c837 0x07178d5d 0x2b69f8b3 0x3bc0b4e6
-+ 0x429c50c1 0xe493ba56 0x5933b099 0x237b2036
-+ 0x0e807425 0xe450e510 0xd72a6007 0xc1459771
-+ 0xe9b22ad9 0xb25e452b 0xeda83668 0xb00e8d93
-+ 0x12b8f351 0x703ed783 0x901c6109 0x72b3e601
-+ 0x099cfb54 0x7fc68f6b 0xda7f436b 0x1dd70c40
-+ 0x5a57914c 0xddc3fe51 0xf1b692dc 0xe8b066bd
-+ 0xaa7b0d19 0x4a593520 0xd3bb712f 0x1e1b4c0e
-+ 0xe651f456 0x4fd0e108 0xdef8932f 0x3de33c3a
-+ 0x4c189801 0x62c607ea 0x708e8086 0xf1b9d204
-+ 0x19656d6f 0x216430e3 0xc8bab24c 0x4ea84e4f
-+ 0x659f0cea 0x4e7bad1d 0x7f4d77d5 0xf6d114a2
-+ 0x6d8038b8 0x8d56f1fb 0x2f015191 0x0b3770bf
-+ 0xd81e40db 0xfe66c348 0xffd1d3bf 0x07021042
-+ 0x8ce5e26a 0xcdaa21ca 0x1bd4b85d 0xfabd423f
-+ 0xba6814e4 0xaa5fe624 0xb2591597 0x81e601e5
-+ 0xf3601f5f 0xf4dbb30a 0x0950789f 0xbe9b1f70
-+ 0x35faf9cf 0x9f27e299 0xf9c1075e 0x09b04ac9
-+ 0x2bb3cb1e 0x8c197668 0x8dffa14f 0xda4a57de
-+ 0x5e0f0a9a 0xd1521120 0x31c26430 0x46a75d9c
-+ 0x6c7e1a50 0xda1db6de 0xaef50782 0xd32d301c
-+ 0xa4688102 0x77c6bc1a 0x3c7e2525 0xcbd4284f
-+ 0x5f493a22 0xb35abf25 0xc996f4ff 0x009f0c05
-+ 0x6143581f 0x7a864557 0xd0e1d52f 0x0725f9fa
-+ 0xdcc0b294 0xc3609ee2 0x75373ce8 0x1ffd4ead
-+ 0x331b82b2 0xfa833542 0x43c00611 0x7ab1215a
-+ 0x099bb7f3 0x1c95dc3b 0xbbfb8231 0xf62659ba
-+ 0xf9cc6fbc 0x030b6f56 0x793603cb 0xe7c48d71
-+ 0x9754aa20 0x41710095 0x35b92718 0xf464fca0
-+ 0x4ad77ab4 0xd5582574 0xe0552ad4 0x7393e896
-+ 0x34920ff9 0xd0a44180 0x2e523669 0x81d5573c
-+ 0x1959ad82 0xfb153a03 0x1cfa615f 0x8b302a87
-+ 0x4e4eea7e 0x21ca24c2 0x5a971dcd 0x788e063e
-+ 0x2c9beb8d 0xb3b98af9 0x24079012 0xbdec8a61
-+ 0xc41752df 0x8d2c0a3d 0xe960ac61 0x658cae63
-+ 0x891956fa 0xd0d1a216 0xbc37b8fb 0x5e2c3009
-+ 0xd600a7ad 0x47c7c30c 0x8fbd13f4 0xbae4d97c
-+ 0xdd15d643 0x71440bb6 0x3fccfa22 0x1ef82308
-+ 0x2c48907e 0xf6ad303e 0xc1ed250f 0x6f9204f8
-+ 0x19062b0a 0xfe8ab325 0x379e8b1b 0x8116d220
-+ 0xc6d4d8cc 0x624098ee 0x3e6aad4d 0xbce3ace2
-+ 0xba349982 0x7439dd11 0x6ac6d240 0x9f2cf9c6
-+ 0x3dff687d 0xe5b6f2c9 0xbe1645a3 0x39a39bfb
-+ 0x7956d69e 0x50d22da6 0xb7e32b7a 0xf4144b4e
-+ 0xb94151a5 0xee36b1b1 0xc8cd8d65 0x5e571859
-+ 0x0db49c4b 0xd9d71cd9 0x4bc017ca 0xc81d5130
-+ 0x0c9660c7 0xe4b12b28 0x5549e753 0x97a9fa4a
-+ 0x0dac4813 0x7854b977 0x7c8cc619 0xe4166449
-+ 0x020ae016 0x02448146 0xa3924345 0x1542cba9
-+ 0x461583ad 0x7bf66ddd 0xaff59684 0x398b370c
-+ 0x5ffbd30c 0x87900806 0x0891afff 0x7aa84ad3
-+ 0x62e35158 0x995e545a 0x6ff3779d 0xa05bdc9b
-+ 0x777a7e83 0x53643dc4 0xd77d4704 0x422ec993
-+ 0xabd03cd1 0xcb6ad4b7 0xa94c512d 0x6562975c
-+ 0x63b27747 0xecc0955d 0xd965b2b6 0xc67b64c5
-+ 0xfd69b042 0xfe7314c4 0x9f807bbe 0xafaba4d7
-+ 0xbd63eb72 0x811a8901 0x7ea1be4d 0x7316f0fa
-+ 0xa6cf004c 0xc17d9363 0xe3fe88d2 0xe60faddc
-+ 0x5d3a1b02 0x8a9f1ed3 0xebfb9234 0xbc453cf2
-+ 0x190085ca 0x369a1df9 0x55721790 0xb071a9f3
-+ 0x0697bfc2 0x65753b76 0x177d720f 0x1563979f
-+ 0x970c4dd8 0x511aec5d 0x19878647 0xc17280ee
-+ 0xe61c4188 0x7a4c0756 0xdb49157b 0x0d461f37
-+ 0xcf0bc73b 0x1c6e7ac1 0x683a9e1e 0x0dd9ae7c
-+ 0x72be0902 0x85a22cd8 0x8b98d2dc 0x2f3a9ff1
-+ 0x4540314d 0x3a4e344f 0x3ada6bee 0x3408b829
-+ 0x711ba0cb 0x0c92ae4a 0x621bc5f1 0x908043da
-+ 0x8f8ac31f 0xed15f127 0x731dc6d9 0xdc6eb058
-+ 0x6815eb3e 0xaca3d9e0 0xef7b5c61 0xfea2a032
-+ 0xd3c76315 0x0f88f4c8 0x291b8710 0xa5ef8346
-+ 0xcab00448 0x78ef9fb3 0xebf0388d 0x33f2a5da
-+ 0xc41190f2 0x0cb6bcf7 0x0afe5680 0xef88d3ea
-+ 0xc0e10f4d 0x7e028bfb 0x933657d9 0x6f61fcd0
-+ 0x7e03e392 0x23258472 0xfb16ab16 0xfaf74a5b
-+ 0x7ab0a634 0x8346df0a 0xc3c93451 0xdff93a32
-+ 0x3920a816 0xc3331312 0xa6a2270c 0x10025010
-+ 0xa8f4d842 0x36b96367 0x77a30dad 0xe1bd6d0c
-+ 0xf3ddb722 0x9412e861 0x4e7cd927 0xef243451
-+ 0x41d7258f 0x6eb34be2 0x026ef296 0x46112337
-+ 0x656c8c07 0x18deff2a 0x5be15cbb 0xbaed3a53
-+ 0xc795a134 0xdcb1350b 0x758b6482 0xc6cd0e88
-+ 0x9be9d4f6 0x1ec7c2da 0xc5c1fe49 0x3e86e8f1
-+ 0x09126f9e 0x96772352 0xa4d5c70b 0xc6f1f2d6
-+ 0x3c22e595 0xd5ccf006 0x48f6167e 0x415dfe21
-+ 0xf49891e0 0xab4c4a7c 0xcd9b336f 0x5777d2af
-+ 0x6a8ad930 0x3f47c079 0x72286c81 0x44b565fc
-+ 0x5ff87a6d 0x6aad7ebe 0x66535422 0x4dfcef23
-+ 0xc0ffcc8b 0x6e2cfe00 0xf1e7e1f4 0x06e46379
-+ 0xce1bf7c8 0x70fec576 0xe9d0014a 0x844f7b07
-+ 0xb7a27720 0x4a62dde1 0x39207994 0xe12e7ef1
-+ 0x75f2152c 0xec05cfff 0xac67a90a 0xbb9f0c88
-+ 0x8fe2e008 0x58e15130 0xd54c4808 0x71fc616c
-+ 0x02564be1 0xf3d121e1 0x904f4a7e 0x7eaa8b70
-+ 0x893d8579 0xeb94b6a0 0x4c84f056 0xebf49f0a
-+ 0x2b2fb4cc 0xb6014008 0x1fe0a076 0x9e7af7eb
-+ 0xc168be50 0x61653283 0x2016760c 0x57c36535
-+ 0x720405de 0xb4924329 0xb1189d2c 0x9dd8f5c0
-+ 0x2a5f1ab8 0x49580b2e 0xacbbd3d3 0x3261e254
-+ 0x7a827ba0 0xfc91f0bc 0x2b02ba34 0x96edf03b
-+ 0xfd7fd36a 0x24edb430 0xafc7e2cb 0x0a8cd505
-+ 0x22ed5205 0xb42ca58f 0x24fc4009 0xf064cb61
-+ 0xa564a202 0xe42a9b54 0xd2a28338 0xca1f1a5a
-+ 0xbe51905d 0x9a960bd5 0x4238b656 0xfb08649e
-+ 0x76c93495 0xaccc0877 0xc465148e 0xa2bc11d6
-+ 0x84a54419 0x2a2ddd16 0xd9e1d2e4 0x622bbcfb
-+ 0xcf0608d2 0x93a26458 0x2b666698 0x0645f585
-+ 0xed3df83d 0xf6e81a41 0xce11e962 0x93c27f84
-+ 0x30f41197 0x659aba68 0x57c01eea 0x2a4cc4de
-+ 0xecf2f07d 0x3340329a 0x1084f771 0x9d4c351c
-+ 0x32d28528 0xa3b947ae 0x78fce7f7 0x14d0290c
-+ 0x7b7ac82e 0x7de381ad 0xa907d620 0xc31ae25b
-+ 0x513a2723 0xd8cc3457 0x8fe676a6 0x04039d12
-+ 0xdce5a5ff 0xcc0af574 0x1406d489 0x3393d517
-+ 0x004cfc81 0xeffe2eba 0xf2ee0c96 0xacac4889
-+ 0x6484e7d3 0xdecdce02 0x029dacc5 0x95c52292
-+ 0x0dfaa257 0x7150527a 0x0b59ab84 0x3a915b26
-+ 0x2624fe20 0x46309564 0x704261ba 0xdf434f92
-+ 0x2eb248c1 0x26d555d7 0xc75d81f5 0xbd0185b8
-+ 0xf53b1298 0x059b9353 0x7821a25e 0x4d7fe1cc
-+ 0x811b5179 0xe42e22a9 0x4fb78808 0xd6841c31
-+ 0xd9edb88a 0x9b433474 0x1c54ca12 0x4887f63d
-+ 0xf1b21006 0x8f7761fe 0x62a15331 0x6b35788c
-+ 0x4a5a9edf 0xfdee39c8 0xed95d818 0xe087b392
-+ 0xcdc89907 0x5ee58605 0xd4d7290b 0x46f8d2ce
-+ 0x6c9c3f65 0xd129f26e 0xd8cd5b87 0x2bc19529
-+ 0x7ab5b036 0xc44a6fbf 0x76fb68b1 0x6bffe654
-+ 0x482067f6 0xf8ed9d43 0xdad6bd63 0xa9ac77a2
-+ 0x76e6c089 0xe24ba46c 0x420ccbe3 0xfb09b718
-+ 0x83ec3694 0xf76e47d9 0x5f3a8859 0xe85f7fcd
-+ 0x61f1d09a 0x35065817 0x88bf5c6b 0xfbb9f76d
-+ 0x8b68fca3 0xed95dcb5 0xc2ff7cf1 0x855a2958
-+ 0xf7d28d92 0xb61802f7 0xf9814028 0xac8703c5
-+ 0x4ce8c7cd 0x1876cfe3 0x851c045a 0x56b3d146
-+ 0xe7abf1e7 0xdc46d720 0xd1e35c3a 0x2243ff60
-+ 0xc257c828 0x16513009 0xcb797d5d 0xe0f2cb11
-+ 0xf7e40b66 0x721e0495 0xce72e9b7 0x32eeedcf
-+ 0xf5dc5e01 0x355de93e 0xc20ad627 0x95aa436a
-+ 0xe69cab2b 0x511fef1c 0x18522a80 0x203e240f
-+ 0x882fb1f6 0xfed4db9a 0xa4bf7193 0x420df144
-+ 0x84791341 0xdb4767a1 0x8c0b40fb 0xcfa5c5d2
-+ 0x2783cad4 0xcf8dd48c 0x051037a0 0xc2994140
-+ 0xaf2a0a2e 0x29619774 0xffd83edd 0x1e346b24
-+ 0xb058a539 0x8118011a 0xb1722fcf 0x4f89c7b1
-+ 0x0e6f2f4b 0xdb155d1d 0x21d21cf9 0x25ba315b
-+ 0x7a17b541 0x3f23c32b 0x301e0881 0x9b0ad7f7
-+ 0x8adfccee 0x6c2f2975 0xbc9c318d 0x8d220d3b
-+ 0x33d2d0c1 0x5bc2dbf5 0xe0290856 0xedd38c75
-+ 0x56642fea 0xf7f5609b 0x5bdb0058 0x511dfc07
-+ 0xc6b0b515 0xeac6f4af 0x7da3a898 0x50452011
-+ 0x4668042b 0x4055890e 0x7bd41459 0x9b98f96a
-+ 0xc516cb64 0x15313f77 0x04f6816a 0xd622931a
-+ 0xbe2be61e 0xd549a421 0x380373c2 0xabb7123d
-+ 0xc54b9d3b 0x5a130630 0xafff90c4 0x50f5b4ce
-+ 0x75b0ecf0 0x16078950 0x44d547f1 0x8353af66
-+ 0x587bb496 0xf8f3c68a 0xd3b06119 0xef05594d
-+ 0xd403c928 0xf12b06bf 0x2b78eb2d 0x7de9106d
-+ 0x4966726e 0xa8b5ef1a 0x1c42a3f6 0xd55aa69b
-+ 0xe409c51f 0x93533259 0xc6d9dbf5 0xb4d63a17
-+ 0xaaf73aaa 0xe485f5d5 0x753f0d34 0x1a3e6dde
-+ 0x41183e36 0x2ec20e27 0x6b66bead 0xfc5f1d42
-+ 0xfecdf91f 0xb7066b78 0x8ed6da1c 0xbbeb87d7
-+ 0x8a72de9b 0x1e0e2f97 0xc377f532 0xedbdeb81
-+ 0x0f5b9e33 0x6ae7ebf2 0xca7440df 0xe9c3eefd
-+ 0x4bd50433 0xc25a6b95 0x9d2bd1e2 0x70709639
-+ 0x9050c202 0x7cbd2f1d 0x41443fa5 0x63dd89b1
-+ 0xb2607a0e 0x88c1417d 0x1631dbb0 0x13508ae3
-+ 0x4e78d90c 0x19811ae0 0x4bc827fb 0x459a55aa
-+ 0x52c0fd8d 0x8359500c 0x6a886312 0xbe704e33
-+ 0x441b7c24 0x5121c79c 0x86066830 0x1a0d013f
-+ 0xe78bfa0b 0x3f9e3ffc 0x7b3abb16 0xfc24b9ee
-+ 0x4f543a26 0x0619ad49 0x6a20077e 0xc8191371
-+ 0xd1d2876f 0x8b83645d 0x48330de1 0xe132ea1a
-+ 0xdc077f5a 0xfd14dd79 0xf606c198 0xec47c478
-+ 0x17c3f14f 0x334fd708 0xe39cf072 0x39f543c2
-+ 0xebab93a2 0xf7febed4 0x79971f6b 0x888858d4
-+ 0xdfd11199 0xafe72dfa 0x13f30ff8 0x6141ada3
-+ 0x5fe75eb0 0x75dcecd6 0x70fb1b33 0x073f9823
-+ 0x7afb726d 0x04b10ea5 0x6c881a5b 0x945a5c69
-+ 0x2ecb950a 0xb384f045 0xe5eb9ac8 0xa46dfd3b
-+ 0xb8185584 0xc095b417 0x86173c80 0x6a509180
-+ 0x4eddcc32 0xf408ac80 0x0833ae99 0x58ca79b2
-+ 0x2eac5d79 0x85c2deb7 0x400e6a01 0xdc6caa56
-+ 0x706176e7 0xa5dadc8f 0x0d4969de 0x259553d9
-+ 0x52425195 0x7d074da3 0x784ef596 0x8580e28c
-+ 0xbaa52874 0x71abf00e 0x8434cb32 0xc3a8ffe2
-+ 0x6ec52581 0xa4cd744f 0xd5820757 0x7e257e4d
-+ 0xb7428f60 0xb55fd824 0xd454c529 0x8de72e07
-+ 0xf84abcb4 0x30b7c926 0x5140a1d2 0x4e9550c6
-+ 0x18826ed6 0xf561a8eb 0x28c7cde6 0xe91022ea
-+ 0x73cdc0ef 0x32bea752 0xc7a0138d 0xa0af6cd3
-+ 0x52c4736d 0x0b459241 0x2156a8d8 0x0d32a2ad
-+ 0x49bb6600 0x8752c2bd 0x45d0a0ec 0xc89f9bc3
-+ 0x76d775a6 0x963f0a6b 0xb5d100fc 0x2731528b
-+ 0x2719d1a1 0x2b201af5 0xc337ea7b 0x70ce1c8f
-+ 0x8cb21437 0x9869038c 0x53e9458e 0x624904e5
-+ 0xcb7cdad7 0x13b9bba7 0xc66ec1ae 0x86bbb14d
-+ 0x018c25ad 0x88573452 0x4165b4bd 0xa719f640
-+ 0xd4b8227a 0xdace857f 0x701c449e 0xa835c09e
-+ 0xef8e4608 0x72ec0d91 0xe88703ac 0xb6470c3d
-+ 0x0cae0aff 0xae650f6c 0x384c382e 0x5d4b6275
-+ 0x6691c449 0xfba67785 0xe3a5b7b7 0xfb72c85e
-+ 0x09056be6 0x15e28bd0 0xb6be7e9e 0xd97fac13
-+ 0x1e6023bc 0x0f28cfbd 0x840eeee5 0xd208ac51
-+ 0x12b36d98 0xd28885de 0x108c3e86 0xff2ae965
-+ 0x09b446c4 0xe453ba28 0x42c997ac 0x880e22f3
-+ 0x0eeee913 0x5a0c9803 0xf080f33c 0x47e99f76
-+ 0xa62e02f6 0x38283513 0x5ecad92f 0xaef2a1eb
-+ 0xa5cdc2c5 0xd5e6ae58 0x03dbffd9 0xc24ddb4f
-+ 0xaaeecc9d 0xdbeb2dfc 0xfda7e5a0 0x8e537029
-+ 0x8ae38058 0xfce24682 0xcdd46b74 0x0cc2b384
-+ 0x89cd2e8b 0xe955abd6 0x82c64f39 0x716c7713
-+ 0x70dbaa6c 0x271b7a9c 0x332e6234 0x8d081fed
-+ 0xb47ac8d3 0x818af259 0x6d97d09f 0x7aaca213
-+ 0x2124cd22 0x70fc4cbc 0x02988745 0x29e28390
-+ 0x2b11e888 0xe62b3826 0x8c6260e9 0x2b2d9036
-+ 0xc3cd85c3 0x3a08e1a7 0xf406364f 0x6ff5f0d9
-+ 0xc0c2a847 0x076cac4b 0x85eea1ab 0xbe6d6dbc
-+ 0xdffbd36d 0xf1bb8934 0xae696cac 0xfe51475b
-+ 0x6bce710a 0x83d6ff0d 0x44cb120f 0xd0c01d5a
-+ 0x997f8469 0xdaad8626 0xdff160f7 0xf2954b72
-+ 0xd4efa312 0x07035ee6 0x03e8dbb0 0x5a33d382
-+ 0xc6527dc6 0x0b7391a3 0xfe568e01 0x24c28c70
-+ 0x76e65ea0 0xeafaf171 0x1ab4ebfa 0x4ff66462
-+ 0xc9949824 0x776d25fe 0x3689d8f9 0x1ec65a2c
-+ 0x746581f5 0x227209d2 0xbff7bc69 0x91b4c927
-+ 0x171c5962 0xb4dd5f85 0x72e4917a 0xd01ff1af
-+ 0x9c6ba703 0xdb9d9be6 0xae1cf2c5 0x48b85c21
-+ 0x9628b693 0xa8d2e2f7 0x856584db 0x1b33821e
-+ 0xff5de311 0x4126d04c 0xf00ac027 0x54bdaa98
-+ 0xa3dd5b0a 0xce2b2558 0xea5f50d8 0xb2e88f18
-+ 0x19590981 0x6dae2c0a 0xbfd758bc 0x2897e93c
-+ 0x3ba5d054 0x2d809b4c 0x3de6aa52 0xea171509
-+ 0x7d8b7b44 0x19a1ad1c 0xe99b2657 0x98ac56e9
-+ 0xc2150187 0x63a12506 0x4ffc1739 0x50e2ca6c
-+ 0x4f2ff10c 0xb7323ff6 0x81d9f57a 0x5146beee
-+ 0xa1f45456 0xf6ce5d75 0xdff7be9a 0x75ab2dc9
-+ 0x5ff2901a 0xec756ab3 0x8a5e0299 0xc4e248ce
-+ 0x248502e8 0xd8c62cf1 0xc7001b23 0xf7c636d2
-+ 0xefbb67e1 0xec507025 0x1820ac19 0x39e1624c
-+ 0x4ee603b2 0xb70e1c67 0xaf9376fc 0x371af05b
-+ 0xa19209fe 0x8ecdf499 0x9a607cb2 0xcbe61a2c
-+ 0x9f4e950c 0xb9a1546f 0xe718f140 0xc75d5d02
-+ 0xabe66af2 0xecc54d7b 0xb4373489 0x22254496
-+ 0x4b4b7f7c 0x40dde60e 0xfe621a3e 0xa6605c67
-+ 0x5cf6a3a2 0x75df88a3 0xbf0749b0 0x705a0a04
-+ 0xf3cae078 0x392bdebd 0x98878e65 0x0f5a2be5
-+ 0xec172835 0xf610cc90 0xac6ff369 0x0a71c173
-+ 0x8eae2d62 0x2ccbb630 0xd3b702ea 0x1626bfff
-+ 0xdb4a6975 0xd2a936f7 0x0bb63194 0x5d9120dd
-+ 0x5860e04e 0x3baeca91 0x95a621db 0xa6d23aaf
-+ 0xfebcfa2d 0xa5ed89cf 0x2192280a 0x72322cb8
-+ 0xd79e14d2 0x0528ce06 0x1c6a8f9c 0x6703407c
-+ 0x93819694 0x6c554390 0x7875452a 0xf45d2757
-+ 0xe0458d1d 0x335f6179 0x48989cc9 0xdc16cec8
-+ 0x9e2c0ee5 0x78daabe2 0x2069e8eb 0x0e87f238
-+ 0x0a928dda 0xc66e14b3 0x2a6c4031 0x73821630
-+ 0x8b8c4a40 0x243702b7 0xded80901 0x5de34802
-+ 0xea029b73 0x59a47771 0xe747d796 0xe80aea8d
-+ 0x0bd01815 0x76fe1f68 0xa345fc34 0x73737383
-+ 0x76753b6c 0x57dcba56 0xb11d6b21 0x81dc371e
-+ 0x311f4ea0 0x3b4b2522 0xe8a66ef4 0x1932df0c
-+ 0x9f3790d6 0x0d0478a3 0x7dd0a24b 0xeb581381
-+ 0x6fe8ff06 0xe34c2d69 0x26842e15 0xe9a39562
-+ 0x78f2d7d1 0x79ab33f5 0x197df69c 0x38a9a004
-+ 0x9391dba9 0xfbb4b7c5 0xa97bb70f 0x0720b57b
-+ 0xd9b26325 0x3ed1a3fc 0x11f5aba0 0x6e6a53ef
-+ 0xe2ce236e 0x30994468 0x9d4369cd 0xcb6b5b5c
-+ 0x61a0945c 0x090e7dea 0x5d9b676a 0xd474cb52
-+ 0x8ebf1af3 0x35f2a70b 0x417d48a0 0x45062dcc
-+ 0x841d8d90 0x30f8e590 0x1c935ad3 0x29313e0c
-+ 0x46ecf673 0x4998b596 0x95f23529 0xf31bd581
-+ 0x1b32045a 0x90432d28 0xa2a6c268 0xbf40fcae
-+ 0x4104b314 0x02677221 0xa99231ac 0xe28abada
-+ 0xd7d72a73 0xf1b2ce4c 0xf753f8be 0x9d7fc1c7
-+ 0x9a0e7a7a 0xf04ccf32 0x58433f5f 0xab9a6d51
-+ 0x71262b1c 0x48f84d91 0x897670bb 0x47dd10cb
-+ 0xac7ef74d 0x78dc3e54 0x30b17eaa 0xc8f46618
-+ 0xc636fe3b 0x86ac06e3 0xfb8edd16 0xed357170
-+ 0xbfd34bf8 0xaeb9571a 0x4eec6a50 0xe881a1b7
-+ 0x8a1cbbde 0xc6c077b6 0xaeda1441 0xf990296a
-+ 0xc91e87d6 0xad0ca921 0x855537b6 0xfc0da57d
-+ 0xf8427d87 0x9ece7413 0xc5d4b4c9 0x2fca7822
-+ 0xa1888443 0xd3bf617e 0xab21ce7d 0xe63b5f53
-+ 0x828501c5 0x81a39da9 0xb8cfb4c6 0x6b23b8dc
-+ 0x853fe425 0xba262321 0x34f11b05 0x8044aea4
-+ 0x67a3f99d 0x51e8afb7 0x04efcf27 0x7773f9ff
-+ 0x8abceec1 0xd75d87a2 0x7e30d774 0xdd7a42f2
-+ 0x2ca6ad73 0x27d4e62f 0xbc228d26 0x035a7713
-+ 0x5dbcc13a 0x792a97da 0x56cf9fc2 0x5906fa3e
-+ 0x97a3147c 0x85e59863 0x19ad1f49 0x1af659a8
-+ 0xddc6a273 0xd254a195 0x44d83a00 0x3b7c5fa7
-+ 0xcaf756aa 0x68ad08b9 0xfc57da12 0x3b278f24
-+ 0xbd165574 0x3cf597ca 0xdeb872ba 0x543eb2f5
-+ 0xfabc0d4f 0x0799c544 0x3d71181d 0x22c8a598
-+ 0xb82840fc 0x1a198d19 0xf529a0ea 0x2f65bc24
-+ 0xe979f99d 0xff8617b4 0x376e5abb 0xb095a03e
-+ 0xa36b1107 0x2dacf004 0xe4c565e1 0xc96463cd
-+ 0x3b495e2d 0x4a2c2cd7 0xa0053fc2 0x6c82a085
-+ 0x6b801c45 0xc1481d77 0x6d95dc15 0x44dc8bf6
-+ 0x3eed7d25 0x901a6b49 0x2797e953 0x502ad2c3
-+ 0x8491c3f2 0x3ce059eb 0x992c1a76 0x6c56d2a2
-+ 0xcf1878a7 0x10574487 0x5a2f85e6 0xf94e418e
-+ 0x4c149aed 0x9381b5a3 0x79c90da4 0x635e696e
-+ 0x243073ba 0x67504105 0xe82ac957 0xaccda7b3
-+ 0x29bdd624 0xd0c1533c 0xbc080065 0x8d617329
-+ 0x27e6f74a 0x31e87692 0x50a3857d 0xc5b1ec3f
-+ 0x4f03be5f 0xa35fde17 0x537a59bb 0x793d1eb5
-+ 0xc11a0588 0x067e5593 0x102532c3 0x4024b312
-+ 0x32504cf4 0x4ddc0e9a 0xad5b1d24 0x41081874
-+ 0xf94fced4 0x16f39da6 0x9bdfbe58 0xc5615db4
-+ 0x1fdd769d 0x4278b52e 0x4525b8b6 0x7feed258
-+ 0xe0b4348b 0xb4925ccc 0x5547cc88 0x3f7f5443
-+ 0x5b8cc6d3 0xbe6a15cf 0x7308c088 0xde4219df
-+ 0x4685593c 0xc4ae83a3 0xaea72ff0 0x403b0c08
-+ 0xe533a9aa 0xed46be76 0x4390bcd0 0x683a9f3f
-+ 0x338b5cd3 0x7cd59689 0x2eb11aec 0x74e91cfd
-+ 0x7ae588aa 0x0eadf94e 0x30a6b42f 0x1965f165
-+ 0xd96de54b 0x06c85abf 0x1bbc0ab8 0x79f3ddd0
-+ 0x871fd58d 0x498dd69d 0x9197dd0e 0x6cbb3a4f
-+ 0x8a1f2a01 0x0d9cf747 0x80e66655 0x770d2b25
-+ 0x567bd3eb 0x59583c5a 0x58afeddd 0x9296d0e3
-+ 0xcf5af62c 0xf48b4c78 0x746f657e 0xe543b903
-+ 0x24603809 0xd1bceeea 0x16d04950 0x2a7c754b
-+ 0x4ea8bb99 0x9daecb97 0x3045b9a9 0x4a3e84d9
-+ 0x5487e79f 0xd6145e57 0xc3b17f6f 0x14448bb6
-+ 0x8e8529f5 0xf895acb9 0x6605c0f0 0x52d00ca9
-+ 0xabf6e3e9 0x8f36e307 0xa7a15442 0x55144801
-+ 0x69b028b2 0x8ab3b912 0xb493f80e 0x2dc9fdfa
-+ 0x1b091fbf 0x1bce6b31 0x79eb414e 0xe5f86ea0
-+ 0x39ef7dbd 0x2f86faf0 0xec366923 0xe770c7be
-+ 0x74e4aa61 0xef3b9da0 0xd77bd8be 0xfd13d3cb
-+ 0x4e8023c6 0x3d993904 0xfcb2f700 0xa14b753b
-+ 0xde16c1c3 0x983c5a86 0x52ba5e61 0x1d67b044
-+ 0x0f9a302d 0x2f13b653 0x769cbb97 0xea3e1cbd
-+ 0x5791778c 0x540fcff1 0x5e6c53f2 0xc9cbac0f
-+ 0x40ceadf0 0x648713d3 0xb5347ada 0xfe280079
-+ 0xb8389f3f 0x5a6be26a 0x8e683d28 0x6a3e8e3a
-+ 0x97ecac7a 0x70b648f1 0xe4eca20e 0x088cd0b4
-+ 0xbad30405 0x0f77e382 0x673cdf65 0x438af1f0
-+ 0x0b4f4eea 0xf0cc34e9 0x374a3c04 0x4370d27d
-+ 0xc3e1e84d 0x141205c2 0xfa831e8d 0x32f2f10a
-+ 0x77899366 0xc9d07590 0x9b6f2286 0xcac96a03
-+ 0xf822808b 0x265606cd 0xbeef275d 0x73415b15
-+ 0x4c87250e 0xf95a8c8a 0xdc8d6166 0x68522e63
-+ 0xb9becc14 0x7b5f20be 0x3d158dab 0xa73b1716
-+ 0x3b2cac15 0xf0498939 0xb60653bf 0x33fafc0e
-+ 0x3b416955 0x3addca50 0x16ab21cf 0xd18cbdb6
-+ 0x3b29b87b 0xa6fb7e4b 0x6634147f 0x44283b1e
-+ 0x430ae726 0xa907ab82 0x2baa6706 0x621d2390
-+ 0x15944559 0x2516c807 0x7d1eeb61 0xe2714121
-+ 0x288d3998 0x47713cbb 0xa1ce3c1e 0x0c29b6dd
-+ 0x9923131c 0x2dd19cfa 0x83d0ece5 0x78474c7b
-+ 0x92dee4f0 0xba5cb0f7 0x780c1d41 0x50da5a89
-+ 0xe303cebb 0xe8d5a2bd 0x7d6269a9 0xb75484f1
-+ 0x33ee8186 0x085b7657 0x7b1c7863 0xdb1a43ce
-+ 0x3d0c4bf0 0x302c1292 0x81e42216 0xee1f2c9d
-+ 0x822451ab 0xcefd8067 0x8330dc41 0x14492542
-+ 0xf038f54d 0x90a1abf9 0xc3067a77 0x40d9a42c
-+ 0x127285c1 0x80ad15ff 0xaf4854e2 0xa47874f4
-+ 0x2ed59760 0x67252c6a 0xe2830f38 0x8150c00c
-+ 0x16f61cca 0x1331f815 0x2d832d17 0x163c6010
-+ 0x69464e2f 0x99940411 0xbce5e85f 0x43d39ef2
-+ 0x9b7224dc 0x28652b6d 0x331a7632 0x127f669e
-+ 0x44a034ad 0xe95d2cec 0x3d83fefb 0xfa6d40a2
-+ 0x9b535bf4 0xc83411ce 0xd661655b 0x64bcd8d2
-+ 0xd99e1570 0x7dc4d877 0x9756b210 0x7623dc0d
-+ 0x484dd33f 0xe7bca204 0xa06efbc5 0xa358c03f
-+ 0x362cb282 0xe40e6d04 0x17ab9f5e 0x79a71a09
-+ 0x804bf1a9 0x6bca7d73 0x5504a4ff 0xd3946f75
-+ 0x18b0b9d4 0xd85993cc 0x94d000a5 0x8dda1609
-+ 0x30afb8f6 0xb3c99c3c 0x7686d59d 0x68b719db
-+ 0xdc7b3edb 0xedb76012 0xbfa0ba3b 0x280b829d
-+ 0x72fcf1aa 0xe3d8f83c 0x088a57cf 0x95156217
-+ 0x3306eb47 0x1d09cf54 0x1391876f 0x5b15ecde
-+ 0xb46104e1 0x8d8f2593 0x90ee50cc 0x78dad4b2
-+ 0xfd96daee 0xdbf15e95 0xfc859faa 0xdb4422a5
-+ 0xa00eeab6 0x525232c6 0x9b665668 0x8a70518b
-+ 0xbb27f7ac 0xb066b096 0x25754db6 0xe8c7d748
-+ 0xd4e8d361 0x380dd246 0x9bdf15e6 0x6823c660
-+ 0x5d408fe7 0xe59a5a89 0x1eb7523b 0x4997158e
-+ 0xfa6214d2 0x03b35025 0x9aeff33c 0x20a38aad
-+ 0x522f79cd 0x4141f19c 0xc58cd2bd 0xc816da37
-+ 0x62c6f8d9 0xc15ea9f4 0x138d1f45 0xd36cef03
-+ 0x88183bd6 0xe0de9036 0xefcbe8fc 0x5ebdce26
-+ 0x9e83b01b 0xd35f6747 0x552951f1 0x4e20dd66
-+ 0x419702b1 0x45446e7c 0x7ce5616b 0x6152e3a8
-+ 0xffd572e1 0x4fab25b0 0x07563b80 0x98720ee7
-+ 0x176d29bf 0x21cbd730 0xbde74431 0x09a8cce2
-+ 0xc15e548e 0xe6a92b4b 0x14f17e74 0x75f7817b
-+ 0x592143e8 0x113dbd25 0x5f7d7160 0xbdd8b1e0
-+ 0x6ce045e5 0x53b27b2d 0x371c8aa8 0xa4da8be0
-+ 0xf1f6df4e 0x9519bac4 0x6d6169cf 0x7846253f
-+ 0xccb95d95 0x6ad11a98 0x4a3bd21d 0x5389f44c
-+ 0x7c07ef3a 0xb983ca57 0xcf7f290d 0x4ec516f1
-+ 0xa7711e70 0x818d45a9 0x49db6441 0xd032fc2a
-+ 0x657df4d3 0xe37e6809 0x459a22da 0x41df8aa5
-+ 0x462108a6 0x65177d27 0x1ddffa9f 0x7fa6631b
-+ 0xdd7a414c 0x6351f0d1 0x1b38a419 0x6b529c8e
-+ 0x167745e4 0xcac35897 0x3d7bf419 0xd59ed67a
-+ 0x6486b2c9 0x9ae4fc90 0x8f608920 0xd35335c0
-+ 0x8f113cba 0x0fcc11a1 0xdc180fbf 0x57a99319
-+ 0x2c54185f 0x764c18d0 0x4f84b111 0x30a11040
-+ 0xd15620af 0x496af145 0x263b2de2 0x3ff103dd
-+ 0x38484dac 0xf143a3bc 0xb62c0de6 0xb122c545
-+ 0x72f10466 0x63728442 0xee0117c9 0x2309f14b
-+ 0x4ccdd5de 0x37ae022d 0x2ee7f050 0xf2aa9af6
-+ 0xcd314a20 0x86954941 0x97215303 0xcd7e1687
-+ 0x1dab6672 0x1c920209 0x41102dae 0x8b21c8ab
-+ 0x6f70b04b 0x2988b209 0x86e6f033 0x5eb91718
-+ 0x925b3c40 0xdcad0288 0x0ee98331 0xc3096ceb
-+ 0x9fa04740 0x3ce3fb23 0x90d75cbd 0xeab21768
-+ 0xaca5db0a 0x1c440578 0x762cb728 0x315a699f
-+ 0xcd2b6490 0x11e3e267 0xa10d1bbc 0x23ac26d3
-+ 0xc0c7c268 0x37ecf7ac 0x28de6fe5 0x6fb8e3e8
-+ 0x583d1131 0x8370812a 0x3afd5d58 0x4569a06e
-+ 0xf27ad86f 0x0db6a631 0x9add5128 0x1748c9fd
-+ 0xc46e3c57 0x4c0df93e 0xc595c544 0x397f7e7e
-+ 0x241f4086 0x7d7ed51b 0x56027473 0x656a6110
-+ 0x970a8011 0xf9c7beb5 0xc6cb9957 0xb7426461
-+ 0x62d3d89d 0xf99d48ca 0x3e4d4a88 0x9f751b71
-+ 0xfa020205 0xa3124337 0x59935869 0x98c58314
-+ 0xff7c4385 0x69191265 0xaf85ebb9 0xe434cda2
-+ 0xb1ad3e0e 0x221d32e1 0x022d73a0 0xd676ce06
-+ 0xab7f0c21 0x915c2444 0xf5bdaba2 0x74e4e789
-+ 0x11ff0d95 0x58c53feb 0xa54eb847 0x9af982ae
-+ 0x8d721596 0x73510fe4 0x95e3bd19 0xd82f8359
-+ 0xc09cdd5b 0xc07f57a4 0xbece605b 0xa8a43c5b
-+ 0x0acbeb6d 0x3c5cd8ce 0xb631050d 0xd558c921
-+ 0xcb5054c2 0xefb06252 0x40d2e2cc 0x14ffe6ff
-+ 0x761001a9 0xad64e7a5 0xb55618b4 0x2a40a1fc
-+ 0x2cbe6d40 0x2bc18fc1 0x196e7092 0x3c137791
-+ 0xa799eb23 0x1156feb9 0xd55d7ed1 0x0149c315
-+ 0xae77081f 0xfe724690 0x55ed2fd7 0x04b18cd7
-+ 0x691583f4 0xb1be4fde 0x19ae1cf7 0x3250140b
-+ 0x35daeeb2 0xc9459a84 0xea2c19e1 0x57f8c9cb
-+ 0xe05e07a4 0xcc77a363 0x43afd702 0x48305862
-+ 0x6c4b459f 0x66ed6178 0x26be9f81 0xeac41ee5
-+ 0xbe5e2e6b 0x177f9068 0xede56c48 0x438b3811
-+ 0xd5bd7ee4 0xc027d1a8 0xc1c0f725 0x48d4d4eb
-+ 0x6ffa28d5 0xbd6ac9eb 0xd497781d 0x24d3a154
-+ 0x409bb5c0 0x8079bf76 0x90a522dc 0x19bf7033
-+ 0x1a529b6e 0xe5207e4d 0x3d49b7bc 0x3eca6d54
-+ 0xa37681a6 0xaa9a62e4 0xe54aa1e1 0xb91e7157
-+ 0x8cce8f65 0xbcbbd62c 0x7fa477b5 0x44f46b50
-+ 0x54263fcf 0x529cbb5d 0x8923e390 0x0778d6d7
-+ 0x0cc0503f 0x02c374ce 0xb89c3e5c 0x25b1b353
-+ 0xb227cb2d 0x44108698 0x5e5968c2 0x82c48632
-+ 0x0b8f4209 0x1a241879 0x9edca6f1 0xa1fa51ab
-+ 0x206db0c6 0xbfbbbe98 0xa71c91f6 0xa1b28056
-+ 0xb8bfaaa9 0xa5914f75 0x77d26574 0xacfd459d
-+ 0x77f7cab2 0x249ebf26 0xef902bdd 0x77f6e48d
-+ 0x82497035 0x93333a9d 0x34ea9953 0x8f08d41c
-+ >;
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-coreboot/gpio.h u-boot/arch/x86/include/asm/arch-coreboot/gpio.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-coreboot/gpio.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-coreboot/gpio.h 2015-01-01 17:34:32.253503252 +0100
-@@ -7,4 +7,7 @@
- #ifndef _X86_ARCH_GPIO_H_
- #define _X86_ARCH_GPIO_H_
-
-+/* Where in config space is the register that points to the GPIO registers? */
-+#define PCI_CFG_GPIOBASE 0x48
-+
- #endif /* _X86_ARCH_GPIO_H_ */
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/gpio.h u-boot/arch/x86/include/asm/arch-ivybridge/gpio.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/gpio.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-ivybridge/gpio.h 2015-01-01 17:34:32.253503252 +0100
-@@ -7,4 +7,7 @@
- #ifndef _X86_ARCH_GPIO_H_
- #define _X86_ARCH_GPIO_H_
-
-+/* Where in config space is the register that points to the GPIO registers? */
-+#define PCI_CFG_GPIOBASE 0x48
-+
- #endif /* _X86_ARCH_GPIO_H_ */
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/pei_data.h u-boot/arch/x86/include/asm/arch-ivybridge/pei_data.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/pei_data.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-ivybridge/pei_data.h 2015-01-01 17:34:32.253503252 +0100
-@@ -7,6 +7,8 @@
- #ifndef ASM_ARCH_PEI_DATA_H
- #define ASM_ARCH_PEI_DATA_H
-
-+#include <linux/linkage.h>
-+
- struct pch_usb3_controller_settings {
- /* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */
- uint16_t mode;
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,55 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#ifndef __FSP_API_H__
-+#define __FSP_API_H__
-+
-+/*
-+ * FspInit continuation function prototype.
-+ * Control will be returned to this callback function after FspInit API call.
-+ */
-+typedef void (*fsp_continuation_f)(u32 status, void *hob_list);
-+
-+struct fsp_init_params {
-+ /* Non-volatile storage buffer pointer */
-+ void *nvs_buf;
-+ /* Runtime buffer pointer */
-+ void *rt_buf;
-+ /* Continuation function address */
-+ fsp_continuation_f continuation;
-+};
-+
-+struct common_buf {
-+ /*
-+ * Stack top pointer used by the bootloader. The new stack frame will be
-+ * set up at this location after FspInit API call.
-+ */
-+ u32 *stack_top;
-+ u32 boot_mode; /* Current system boot mode */
-+ void *upd_data; /* User platform configuraiton data region */
-+ u32 reserved[7]; /* Reserved */
-+};
-+
-+enum fsp_phase {
-+ /* Notification code for post PCI enuermation */
-+ INIT_PHASE_PCI = 0x20,
-+ /* Notification code before transfering control to the payload */
-+ INIT_PHASE_BOOT = 0x40
-+};
-+
-+struct fsp_notify_params {
-+ /* Notification phase used for NotifyPhase API */
-+ enum fsp_phase phase;
-+};
-+
-+/* FspInit API function prototype */
-+typedef u32 (*fsp_init_f)(struct fsp_init_params *params);
-+
-+/* FspNotify API function prototype */
-+typedef u32 (*fsp_notify_f)(struct fsp_notify_params *params);
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,24 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#ifndef __FSP_BOOT_MODE_H__
-+#define __FSP_BOOT_MODE_H__
-+
-+/* 0x21 - 0xf..f are reserved */
-+#define BOOT_FULL_CONFIG 0x00
-+#define BOOT_MINIMAL_CONFIG 0x01
-+#define BOOT_NO_CONFIG_CHANGES 0x02
-+#define BOOT_FULL_CONFIG_PLUS_DIAG 0x03
-+#define BOOT_DEFAULT_SETTINGS 0x04
-+#define BOOT_ON_S4_RESUME 0x05
-+#define BOOT_ON_S5_RESUME 0x06
-+#define BOOT_ON_S2_RESUME 0x10
-+#define BOOT_ON_S3_RESUME 0x11
-+#define BOOT_ON_FLASH_UPDATE 0x12
-+#define BOOT_IN_RECOVERY_MODE 0x20
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,154 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#ifndef __FSP_FFS_H__
-+#define __FSP_FFS_H__
-+
-+/* Used to verify the integrity of the file */
-+union __packed ffs_integrity {
-+ struct {
-+ /*
-+ * The IntegrityCheck.checksum.header field is an 8-bit
-+ * checksum of the file header. The State and
-+ * IntegrityCheck.checksum.file fields are assumed to be zero
-+ * and the checksum is calculated such that the entire header
-+ * sums to zero.
-+ */
-+ u8 header;
-+ /*
-+ * If the FFS_ATTRIB_CHECKSUM (see definition below) bit of
-+ * the Attributes field is set to one, the
-+ * IntegrityCheck.checksum.file field is an 8-bit checksum of
-+ * the file data. If the FFS_ATTRIB_CHECKSUM bit of the
-+ * Attributes field is cleared to zero, the
-+ * IntegrityCheck.checksum.file field must be initialized with
-+ * a value of 0xAA. The IntegrityCheck.checksum.file field is
-+ * valid any time the EFI_FILE_DATA_VALID bit is set in the
-+ * State field.
-+ */
-+ u8 file;
-+ } checksum;
-+
-+ /* This is the full 16 bits of the IntegrityCheck field */
-+ u16 checksum16;
-+};
-+
-+/*
-+ * Each file begins with the header that describe the
-+ * contents and state of the files.
-+ */
-+struct __packed ffs_file_header {
-+ /*
-+ * This GUID is the file name.
-+ * It is used to uniquely identify the file.
-+ */
-+ struct efi_guid name;
-+ /* Used to verify the integrity of the file */
-+ union ffs_integrity integrity;
-+ /* Identifies the type of file */
-+ u8 type;
-+ /* Declares various file attribute bits */
-+ u8 attr;
-+ /* The length of the file in bytes, including the FFS header */
-+ u8 size[3];
-+ /*
-+ * Used to track the state of the file throughout the life of
-+ * the file from creation to deletion.
-+ */
-+ u8 state;
-+};
-+
-+struct __packed ffs_file_header2 {
-+ /*
-+ * This GUID is the file name. It is used to uniquely identify the file.
-+ * There may be only one instance of a file with the file name GUID of
-+ * Name in any given firmware volume, except if the file type is
-+ * EFI_FV_FILE_TYPE_FFS_PAD.
-+ */
-+ struct efi_guid name;
-+ /* Used to verify the integrity of the file */
-+ union ffs_integrity integrity;
-+ /* Identifies the type of file */
-+ u8 type;
-+ /* Declares various file attribute bits */
-+ u8 attr;
-+ /*
-+ * The length of the file in bytes, including the FFS header.
-+ * The length of the file data is either
-+ * (size - sizeof(struct ffs_file_header)). This calculation means a
-+ * zero-length file has a size of 24 bytes, which is
-+ * sizeof(struct ffs_file_header). Size is not required to be a
-+ * multiple of 8 bytes. Given a file F, the next file header is located
-+ * at the next 8-byte aligned firmware volume offset following the last
-+ * byte of the file F.
-+ */
-+ u8 size[3];
-+ /*
-+ * Used to track the state of the file throughout the life of
-+ * the file from creation to deletion.
-+ */
-+ u8 state;
-+ /*
-+ * If FFS_ATTRIB_LARGE_FILE is set in attr, then ext_size exists
-+ * and size must be set to zero.
-+ * If FFS_ATTRIB_LARGE_FILE is not set then
-+ * struct ffs_file_header is used.
-+ */
-+ u32 ext_size;
-+};
-+
-+/*
-+ * Pseudo type. It is used as a wild card when retrieving sections.
-+ * The section type EFI_SECTION_ALL matches all section types.
-+ */
-+#define EFI_SECTION_ALL 0x00
-+
-+/* Encapsulation section Type values */
-+#define EFI_SECTION_COMPRESSION 0x01
-+#define EFI_SECTION_GUID_DEFINED 0x02
-+#define EFI_SECTION_DISPOSABLE 0x03
-+
-+/* Leaf section Type values */
-+#define EFI_SECTION_PE32 0x10
-+#define EFI_SECTION_PIC 0x11
-+#define EFI_SECTION_TE 0x12
-+#define EFI_SECTION_DXE_DEPEX 0x13
-+#define EFI_SECTION_VERSION 0x14
-+#define EFI_SECTION_USER_INTERFACE 0x15
-+#define EFI_SECTION_COMPATIBILITY16 0x16
-+#define EFI_SECTION_FIRMWARE_VOLUME_IMAGE 0x17
-+#define EFI_SECTION_FREEFORM_SUBTYPE_GUID 0x18
-+#define EFI_SECTION_RAW 0x19
-+#define EFI_SECTION_PEI_DEPEX 0x1B
-+#define EFI_SECTION_SMM_DEPEX 0x1C
-+
-+/* Common section header */
-+struct __packed raw_section {
-+ /*
-+ * A 24-bit unsigned integer that contains the total size of
-+ * the section in bytes, including the EFI_COMMON_SECTION_HEADER.
-+ */
-+ u8 size[3];
-+ u8 type;
-+};
-+
-+struct __packed raw_section2 {
-+ /*
-+ * A 24-bit unsigned integer that contains the total size of
-+ * the section in bytes, including the EFI_COMMON_SECTION_HEADER.
-+ */
-+ u8 size[3];
-+ u8 type;
-+ /*
-+ * If size is 0xFFFFFF, then ext_size contains the size of
-+ * the section. If size is not equal to 0xFFFFFF, then this
-+ * field does not exist.
-+ */
-+ u32 ext_size;
-+};
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,137 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#ifndef __FSP_FV___
-+#define __FSP_FV___
-+
-+/* Value of EFI_FV_FILE_ATTRIBUTES */
-+#define EFI_FV_FILE_ATTR_ALIGNMENT 0x0000001F
-+#define EFI_FV_FILE_ATTR_FIXED 0x00000100
-+#define EFI_FV_FILE_ATTR_MEMORY_MAPPED 0x00000200
-+
-+/* Attributes bit definitions */
-+#define EFI_FVB2_READ_DISABLED_CAP 0x00000001
-+#define EFI_FVB2_READ_ENABLED_CAP 0x00000002
-+#define EFI_FVB2_READ_STATUS 0x00000004
-+#define EFI_FVB2_WRITE_DISABLED_CAP 0x00000008
-+#define EFI_FVB2_WRITE_ENABLED_CAP 0x00000010
-+#define EFI_FVB2_WRITE_STATUS 0x00000020
-+#define EFI_FVB2_LOCK_CAP 0x00000040
-+#define EFI_FVB2_LOCK_STATUS 0x00000080
-+#define EFI_FVB2_STICKY_WRITE 0x00000200
-+#define EFI_FVB2_MEMORY_MAPPED 0x00000400
-+#define EFI_FVB2_ERASE_POLARITY 0x00000800
-+#define EFI_FVB2_READ_LOCK_CAP 0x00001000
-+#define EFI_FVB2_READ_LOCK_STATUS 0x00002000
-+#define EFI_FVB2_WRITE_LOCK_CAP 0x00004000
-+#define EFI_FVB2_WRITE_LOCK_STATUS 0x00008000
-+#define EFI_FVB2_ALIGNMENT 0x001F0000
-+#define EFI_FVB2_ALIGNMENT_1 0x00000000
-+#define EFI_FVB2_ALIGNMENT_2 0x00010000
-+#define EFI_FVB2_ALIGNMENT_4 0x00020000
-+#define EFI_FVB2_ALIGNMENT_8 0x00030000
-+#define EFI_FVB2_ALIGNMENT_16 0x00040000
-+#define EFI_FVB2_ALIGNMENT_32 0x00050000
-+#define EFI_FVB2_ALIGNMENT_64 0x00060000
-+#define EFI_FVB2_ALIGNMENT_128 0x00070000
-+#define EFI_FVB2_ALIGNMENT_256 0x00080000
-+#define EFI_FVB2_ALIGNMENT_512 0x00090000
-+#define EFI_FVB2_ALIGNMENT_1K 0x000A0000
-+#define EFI_FVB2_ALIGNMENT_2K 0x000B0000
-+#define EFI_FVB2_ALIGNMENT_4K 0x000C0000
-+#define EFI_FVB2_ALIGNMENT_8K 0x000D0000
-+#define EFI_FVB2_ALIGNMENT_16K 0x000E0000
-+#define EFI_FVB2_ALIGNMENT_32K 0x000F0000
-+#define EFI_FVB2_ALIGNMENT_64K 0x00100000
-+#define EFI_FVB2_ALIGNMENT_128K 0x00110000
-+#define EFI_FVB2_ALIGNMENT_256K 0x00120000
-+#define EFI_FVB2_ALIGNMENT_512K 0x00130000
-+#define EFI_FVB2_ALIGNMENT_1M 0x00140000
-+#define EFI_FVB2_ALIGNMENT_2M 0x00150000
-+#define EFI_FVB2_ALIGNMENT_4M 0x00160000
-+#define EFI_FVB2_ALIGNMENT_8M 0x00170000
-+#define EFI_FVB2_ALIGNMENT_16M 0x00180000
-+#define EFI_FVB2_ALIGNMENT_32M 0x00190000
-+#define EFI_FVB2_ALIGNMENT_64M 0x001A0000
-+#define EFI_FVB2_ALIGNMENT_128M 0x001B0000
-+#define EFI_FVB2_ALIGNMENT_256M 0x001C0000
-+#define EFI_FVB2_ALIGNMENT_512M 0x001D0000
-+#define EFI_FVB2_ALIGNMENT_1G 0x001E0000
-+#define EFI_FVB2_ALIGNMENT_2G 0x001F0000
-+
-+struct fv_blkmap_entry {
-+ /* The number of sequential blocks which are of the same size */
-+ u32 num_blocks;
-+ /* The size of the blocks */
-+ u32 length;
-+};
-+
-+/* Describes the features and layout of the firmware volume */
-+struct fv_header {
-+ /*
-+ * The first 16 bytes are reserved to allow for the reset vector of
-+ * processors whose reset vector is at address 0.
-+ */
-+ u8 zero_vec[16];
-+ /*
-+ * Declares the file system with which the firmware volume
-+ * is formatted.
-+ */
-+ struct efi_guid fs_guid;
-+ /*
-+ * Length in bytes of the complete firmware volume, including
-+ * the header.
-+ */
-+ u64 fv_len;
-+ /* Set to EFI_FVH_SIGNATURE */
-+ u32 sign;
-+ /*
-+ * Declares capabilities and power-on defaults for the firmware
-+ * volume.
-+ */
-+ u32 attr;
-+ /* Length in bytes of the complete firmware volume header */
-+ u16 hdr_len;
-+ /*
-+ * A 16-bit checksum of the firmware volume header.
-+ * A valid header sums to zero.
-+ */
-+ u16 checksum;
-+ /*
-+ * Offset, relative to the start of the header, of the extended
-+ * header (EFI_FIRMWARE_VOLUME_EXT_HEADER) or zero if there is
-+ * no extended header.
-+ */
-+ u16 ext_hdr_off;
-+ /* This field must always be set to zero */
-+ u8 reserved[1];
-+ /*
-+ * Set to 2. Future versions of this specification may define new
-+ * header fields and will increment the Revision field accordingly.
-+ */
-+ u8 rev;
-+ /*
-+ * An array of run-length encoded FvBlockMapEntry structures.
-+ * The array is terminated with an entry of {0,0}.
-+ */
-+ struct fv_blkmap_entry block_map[1];
-+};
-+
-+#define EFI_FVH_SIGNATURE SIGNATURE_32('_', 'F', 'V', 'H')
-+
-+/* Firmware Volume Header Revision definition */
-+#define EFI_FVH_REVISION 0x02
-+
-+/* Extension header pointed by ExtHeaderOffset of volume header */
-+struct fv_ext_header {
-+ /* firmware volume name */
-+ struct efi_guid fv_name;
-+ /* Size of the rest of the extension header including this structure */
-+ u32 ext_hdr_size;
-+};
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,340 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#ifndef __FSP_HOB_H__
-+#define __FSP_HOB_H__
-+
-+/* Type of HOB Header */
-+#define HOB_TYPE_MEM_ALLOC 0x0002
-+#define HOB_TYPE_RES_DESC 0x0003
-+#define HOB_TYPE_GUID_EXT 0x0004
-+#define HOB_TYPE_UNUSED 0xFFFE
-+#define HOB_TYPE_EOH 0xFFFF
-+
-+/*
-+ * Describes the format and size of the data inside the HOB.
-+ * All HOBs must contain this generic HOB header.
-+ */
-+struct hob_header {
-+ u16 type; /* HOB type */
-+ u16 len; /* HOB length */
-+ u32 reserved; /* always zero */
-+};
-+
-+/* Enumeration of memory types introduced in UEFI */
-+enum efi_mem_type {
-+ EFI_RESERVED_MEMORY_TYPE,
-+ /*
-+ * The code portions of a loaded application.
-+ * (Note that UEFI OS loaders are UEFI applications.)
-+ */
-+ EFI_LOADER_CODE,
-+ /*
-+ * The data portions of a loaded application and
-+ * the default data allocation type used by an application
-+ * to allocate pool memory.
-+ */
-+ EFI_LOADER_DATA,
-+ /* The code portions of a loaded Boot Services Driver */
-+ EFI_BOOT_SERVICES_CODE,
-+ /*
-+ * The data portions of a loaded Boot Serves Driver and
-+ * the default data allocation type used by a Boot Services
-+ * Driver to allocate pool memory.
-+ */
-+ EFI_BOOT_SERVICES_DATA,
-+ /* The code portions of a loaded Runtime Services Driver */
-+ EFI_RUNTIME_SERVICES_CODE,
-+ /*
-+ * The data portions of a loaded Runtime Services Driver and
-+ * the default data allocation type used by a Runtime Services
-+ * Driver to allocate pool memory.
-+ */
-+ EFI_RUNTIME_SERVICES_DATA,
-+ /* Free (unallocated) memory */
-+ EFI_CONVENTIONAL_MEMORY,
-+ /* Memory in which errors have been detected */
-+ EFI_UNUSABLE_MEMORY,
-+ /* Memory that holds the ACPI tables */
-+ EFI_ACPI_RECLAIM_MEMORY,
-+ /* Address space reserved for use by the firmware */
-+ EFI_ACPI_MEMORY_NVS,
-+ /*
-+ * Used by system firmware to request that a memory-mapped IO region
-+ * be mapped by the OS to a virtual address so it can be accessed by
-+ * EFI runtime services.
-+ */
-+ EFI_MMAP_IO,
-+ /*
-+ * System memory-mapped IO region that is used to translate
-+ * memory cycles to IO cycles by the processor.
-+ */
-+ EFI_MMAP_IO_PORT,
-+ /*
-+ * Address space reserved by the firmware for code that is
-+ * part of the processor.
-+ */
-+ EFI_PAL_CODE,
-+ EFI_MAX_MEMORY_TYPE
-+};
-+
-+/*
-+ * Describes all memory ranges used during the HOB producer phase that
-+ * exist outside the HOB list. This HOB type describes how memory is used,
-+ * not the physical attributes of memory.
-+ */
-+struct hob_mem_alloc {
-+ struct hob_header hdr;
-+ /*
-+ * A GUID that defines the memory allocation region's type and purpose,
-+ * as well as other fields within the memory allocation HOB. This GUID
-+ * is used to define the additional data within the HOB that may be
-+ * present for the memory allocation HOB. Type efi_guid is defined in
-+ * InstallProtocolInterface() in the UEFI 2.0 specification.
-+ */
-+ struct efi_guid name;
-+ /*
-+ * The base address of memory allocated by this HOB.
-+ * Type phys_addr_t is defined in AllocatePages() in the UEFI 2.0
-+ * specification.
-+ */
-+ phys_addr_t mem_base;
-+ /* The length in bytes of memory allocated by this HOB */
-+ phys_size_t mem_len;
-+ /*
-+ * Defines the type of memory allocated by this HOB.
-+ * The memory type definition follows the EFI_MEMORY_TYPE definition.
-+ * Type EFI_MEMORY_TYPE is defined in AllocatePages() in the UEFI 2.0
-+ * specification.
-+ */
-+ enum efi_mem_type mem_type;
-+ /* padding */
-+ u8 reserved[4];
-+};
-+
-+/* Value of ResourceType in HOB_RES_DESC */
-+#define RES_SYS_MEM 0x00000000
-+#define RES_MMAP_IO 0x00000001
-+#define RES_IO 0x00000002
-+#define RES_FW_DEVICE 0x00000003
-+#define RES_MMAP_IO_PORT 0x00000004
-+#define RES_MEM_RESERVED 0x00000005
-+#define RES_IO_RESERVED 0x00000006
-+#define RES_MAX_MEM_TYPE 0x00000007
-+
-+/*
-+ * These types can be ORed together as needed.
-+ *
-+ * The first three enumerations describe settings
-+ * The rest of the settings describe capabilities
-+ */
-+#define RES_ATTR_PRESENT 0x00000001
-+#define RES_ATTR_INITIALIZED 0x00000002
-+#define RES_ATTR_TESTED 0x00000004
-+#define RES_ATTR_SINGLE_BIT_ECC 0x00000008
-+#define RES_ATTR_MULTIPLE_BIT_ECC 0x00000010
-+#define RES_ATTR_ECC_RESERVED_1 0x00000020
-+#define RES_ATTR_ECC_RESERVED_2 0x00000040
-+#define RES_ATTR_READ_PROTECTED 0x00000080
-+#define RES_ATTR_WRITE_PROTECTED 0x00000100
-+#define RES_ATTR_EXECUTION_PROTECTED 0x00000200
-+#define RES_ATTR_UNCACHEABLE 0x00000400
-+#define RES_ATTR_WRITE_COMBINEABLE 0x00000800
-+#define RES_ATTR_WRITE_THROUGH_CACHEABLE 0x00001000
-+#define RES_ATTR_WRITE_BACK_CACHEABLE 0x00002000
-+#define RES_ATTR_16_BIT_IO 0x00004000
-+#define RES_ATTR_32_BIT_IO 0x00008000
-+#define RES_ATTR_64_BIT_IO 0x00010000
-+#define RES_ATTR_UNCACHED_EXPORTED 0x00020000
-+
-+/*
-+ * Describes the resource properties of all fixed, nonrelocatable resource
-+ * ranges found on the processor host bus during the HOB producer phase.
-+ */
-+struct hob_res_desc {
-+ struct hob_header hdr;
-+ /*
-+ * A GUID representing the owner of the resource. This GUID is
-+ * used by HOB consumer phase components to correlate device
-+ * ownership of a resource.
-+ */
-+ struct efi_guid owner;
-+ u32 type;
-+ u32 attr;
-+ /* The physical start address of the resource region */
-+ phys_addr_t phys_start;
-+ /* The number of bytes of the resource region */
-+ phys_size_t len;
-+};
-+
-+/*
-+ * Allows writers of executable content in the HOB producer phase to
-+ * maintain and manage HOBs with specific GUID.
-+ */
-+struct hob_guid {
-+ struct hob_header hdr;
-+ /* A GUID that defines the contents of this HOB */
-+ struct efi_guid name;
-+ /* GUID specific data goes here */
-+};
-+
-+/* Union of all the possible HOB Types */
-+union hob_pointers {
-+ struct hob_header *hdr;
-+ struct hob_mem_alloc *mem_alloc;
-+ struct hob_res_desc *res_desc;
-+ struct hob_guid *guid;
-+ u8 *raw;
-+};
-+
-+/**
-+ * get_hob_type() - return the type of a HOB
-+ *
-+ * This macro returns the type field from the HOB header for the
-+ * HOB specified by hob.
-+ *
-+ * @hob: A pointer to a HOB.
-+ *
-+ * @return: HOB type.
-+ */
-+static inline u16 get_hob_type(union hob_pointers hob)
-+{
-+ return hob.hdr->type;
-+}
-+
-+/**
-+ * get_hob_length() - return the length, in bytes, of a HOB
-+ *
-+ * This macro returns the len field from the HOB header for the
-+ * HOB specified by hob.
-+ *
-+ * @hob: A pointer to a HOB.
-+ *
-+ * @return: HOB length.
-+ */
-+static inline u16 get_hob_length(union hob_pointers hob)
-+{
-+ return hob.hdr->len;
-+}
-+
-+/**
-+ * get_next_hob() - return a pointer to the next HOB in the HOB list
-+ *
-+ * This macro returns a pointer to HOB that follows the HOB specified by hob
-+ * in the HOB List.
-+ *
-+ * @hob: A pointer to a HOB.
-+ *
-+ * @return: A pointer to the next HOB in the HOB list.
-+ */
-+static inline void *get_next_hob(union hob_pointers hob)
-+{
-+ return (void *)(*(u8 **)&(hob) + get_hob_length(hob));
-+}
-+
-+/**
-+ * end_of_hob() - determine if a HOB is the last HOB in the HOB list
-+ *
-+ * This macro determine if the HOB specified by hob is the last HOB in the
-+ * HOB list. If hob is last HOB in the HOB list, then true is returned.
-+ * Otherwise, false is returned.
-+ *
-+ * @hob: A pointer to a HOB.
-+ *
-+ * @retval true: The HOB specified by hob is the last HOB in the HOB list.
-+ * @retval false: The HOB specified by hob is not the last HOB in the HOB list.
-+ */
-+static inline bool end_of_hob(union hob_pointers hob)
-+{
-+ return get_hob_type(hob) == HOB_TYPE_EOH;
-+}
-+
-+/**
-+ * get_guid_hob_data() - return a pointer to data buffer from a HOB of
-+ * type HOB_TYPE_GUID_EXT
-+ *
-+ * This macro returns a pointer to the data buffer in a HOB specified by hob.
-+ * hob is assumed to be a HOB of type HOB_TYPE_GUID_EXT.
-+ *
-+ * @hob: A pointer to a HOB.
-+ *
-+ * @return: A pointer to the data buffer in a HOB.
-+ */
-+static inline void *get_guid_hob_data(u8 *hob)
-+{
-+ return (void *)(hob + sizeof(struct hob_guid));
-+}
-+
-+/**
-+ * get_guid_hob_data_size() - return the size of the data buffer from a HOB
-+ * of type HOB_TYPE_GUID_EXT
-+ *
-+ * This macro returns the size, in bytes, of the data buffer in a HOB
-+ * specified by hob. hob is assumed to be a HOB of type HOB_TYPE_GUID_EXT.
-+ *
-+ * @hob: A pointer to a HOB.
-+ *
-+ * @return: The size of the data buffer.
-+ */
-+static inline u16 get_guid_hob_data_size(u8 *hob)
-+{
-+ union hob_pointers hob_p = *(union hob_pointers *)hob;
-+ return get_hob_length(hob_p) - sizeof(struct hob_guid);
-+}
-+
-+/* FSP specific GUID HOB definitions */
-+#define FSP_GUID_DATA1 0x912740be
-+#define FSP_GUID_DATA2 0x2284
-+#define FSP_GUID_DATA3 0x4734
-+#define FSP_GUID_DATA4_0 0xb9
-+#define FSP_GUID_DATA4_1 0x71
-+#define FSP_GUID_DATA4_2 0x84
-+#define FSP_GUID_DATA4_3 0xb0
-+#define FSP_GUID_DATA4_4 0x27
-+#define FSP_GUID_DATA4_5 0x35
-+#define FSP_GUID_DATA4_6 0x3f
-+#define FSP_GUID_DATA4_7 0x0c
-+
-+#define FSP_HEADER_GUID \
-+ { \
-+ FSP_GUID_DATA1, FSP_GUID_DATA2, FSP_GUID_DATA3, \
-+ { FSP_GUID_DATA4_0, FSP_GUID_DATA4_1, FSP_GUID_DATA4_2, \
-+ FSP_GUID_DATA4_3, FSP_GUID_DATA4_4, FSP_GUID_DATA4_5, \
-+ FSP_GUID_DATA4_6, FSP_GUID_DATA4_7 } \
-+ }
-+
-+#define FSP_NON_VOLATILE_STORAGE_HOB_GUID \
-+ { \
-+ 0x721acf02, 0x4d77, 0x4c2a, \
-+ { 0xb3, 0xdc, 0x27, 0xb, 0x7b, 0xa9, 0xe4, 0xb0 } \
-+ }
-+
-+#define FSP_BOOTLOADER_TEMP_MEM_HOB_GUID \
-+ { \
-+ 0xbbcff46c, 0xc8d3, 0x4113, \
-+ { 0x89, 0x85, 0xb9, 0xd4, 0xf3, 0xb3, 0xf6, 0x4e } \
-+ }
-+
-+#define FSP_HOB_RESOURCE_OWNER_FSP_GUID \
-+ { \
-+ 0x69a79759, 0x1373, 0x4367, \
-+ { 0xa6, 0xc4, 0xc7, 0xf5, 0x9e, 0xfd, 0x98, 0x6e } \
-+ }
-+
-+#define FSP_HOB_RESOURCE_OWNER_TSEG_GUID \
-+ { \
-+ 0xd038747c, 0xd00c, 0x4980, \
-+ { 0xb3, 0x19, 0x49, 0x01, 0x99, 0xa4, 0x7d, 0x55 } \
-+ }
-+
-+#define FSP_HOB_RESOURCE_OWNER_GRAPHICS_GUID \
-+ { \
-+ 0x9c7c3aa7, 0x5332, 0x4917, \
-+ { 0x82, 0xb9, 0x56, 0xa5, 0xf3, 0xe6, 0x2a, 0x07 } \
-+ }
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,32 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#ifndef _FSP_HEADER_H_
-+#define _FSP_HEADER_H_
-+
-+#define FSP_HEADER_OFF 0x94 /* Fixed FSP header offset in the FSP image */
-+
-+struct __packed fsp_header {
-+ u32 sign; /* 'FSPH' */
-+ u32 hdr_len; /* header length */
-+ u8 reserved1[3];
-+ u8 hdr_rev; /* header rev */
-+ u32 img_rev; /* image rev */
-+ char img_id[8]; /* signature string */
-+ u32 img_size; /* image size */
-+ u32 img_base; /* image base */
-+ u32 img_attr; /* image attribute */
-+ u32 cfg_region_off; /* configuration region offset */
-+ u32 cfg_region_size; /* configuration region size */
-+ u32 api_num; /* number of API entries */
-+ u32 fsp_tempram_init; /* tempram_init offset */
-+ u32 fsp_init; /* fsp_init offset */
-+ u32 fsp_notify; /* fsp_notify offset */
-+ u32 reserved2;
-+};
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,15 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#ifndef __FSP_PLATFORM_H__
-+#define __FSP_PLATFORM_H__
-+
-+struct fspinit_rtbuf {
-+ struct common_buf common; /* FSP common runtime data structure */
-+};
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,207 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#ifndef __FSP_SUPPORT_H__
-+#define __FSP_SUPPORT_H__
-+
-+#include "fsp_types.h"
-+#include "fsp_fv.h"
-+#include "fsp_ffs.h"
-+#include "fsp_api.h"
-+#include "fsp_hob.h"
-+#include "fsp_platform.h"
-+#include "fsp_infoheader.h"
-+#include "fsp_bootmode.h"
-+#include "fsp_vpd.h"
-+
-+struct shared_data {
-+ struct fsp_header *fsp_hdr;
-+ u32 *stack_top;
-+ struct upd_region fsp_upd;
-+};
-+
-+#define FSP_LOWMEM_BASE 0x100000UL
-+#define FSP_HIGHMEM_BASE 0x100000000ULL
-+
-+/**
-+ * FSP Continuation assembly helper routine
-+ *
-+ * This routine jumps to the C version of FSP continuation function
-+ */
-+void asm_continuation(void);
-+
-+/**
-+ * FSP initialization complete
-+ *
-+ * This is the function that indicates FSP initialization is complete and jumps
-+ * back to the bootloader with HOB list pointer as the parameter.
-+ *
-+ * @hob_list: HOB list pointer
-+ */
-+void fsp_init_done(void *hob_list);
-+
-+/**
-+ * FSP Continuation function
-+ *
-+ * @shared_data: Shared data base before stack migration
-+ * @status: Always 0
-+ * @hob_list: HOB list pointer
-+ *
-+ * @retval: Never returns
-+ */
-+void fsp_continue(struct shared_data *shared_data, u32 status,
-+ void *hob_list);
-+
-+/**
-+ * Find FSP header offset in FSP image
-+ *
-+ * @retval: the offset of FSP header. If signature is invalid, returns 0.
-+ */
-+u32 find_fsp_header(void);
-+
-+/**
-+ * FSP initialization wrapper function.
-+ *
-+ * @stack_top: bootloader stack top address
-+ * @boot_mode: boot mode defined in fsp_bootmode.h
-+ * @nvs_buf: Non-volatile memory buffer pointer
-+ */
-+void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf);
-+
-+/**
-+ * FSP notification wrapper function
-+ *
-+ * @fsp_hdr: Pointer to FSP information header
-+ * @phase: FSP initialization phase defined in enum fsp_phase
-+ *
-+ * @retval: compatible status code with EFI_STATUS defined in PI spec
-+ */
-+u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase);
-+
-+/**
-+ * This function retrieves the top of usable low memory.
-+ *
-+ * @hob_list: A HOB list pointer.
-+ *
-+ * @retval: Usable low memory top.
-+ */
-+u32 fsp_get_usable_lowmem_top(const void *hob_list);
-+
-+/**
-+ * This function retrieves the top of usable high memory.
-+ *
-+ * @hob_list: A HOB list pointer.
-+ *
-+ * @retval: Usable high memory top.
-+ */
-+u64 fsp_get_usable_highmem_top(const void *hob_list);
-+
-+/**
-+ * This function retrieves a special reserved memory region.
-+ *
-+ * @hob_list: A HOB list pointer.
-+ * @len: A pointer to the GUID HOB data buffer length.
-+ * If the GUID HOB is located, the length will be updated.
-+ * @guid: A pointer to the owner guild.
-+ *
-+ * @retval: Reserved region start address.
-+ * 0 if this region does not exist.
-+ */
-+u64 fsp_get_reserved_mem_from_guid(const void *hob_list,
-+ u64 *len, struct efi_guid *guid);
-+
-+/**
-+ * This function retrieves the FSP reserved normal memory.
-+ *
-+ * @hob_list: A HOB list pointer.
-+ * @len: A pointer to the FSP reserved memory length buffer.
-+ * If the GUID HOB is located, the length will be updated.
-+ * @retval: FSP reserved memory base
-+ * 0 if this region does not exist.
-+ */
-+u32 fsp_get_fsp_reserved_mem(const void *hob_list, u32 *len);
-+
-+/**
-+ * This function retrieves the TSEG reserved normal memory.
-+ *
-+ * @hob_list: A HOB list pointer.
-+ * @len: A pointer to the TSEG reserved memory length buffer.
-+ * If the GUID HOB is located, the length will be updated.
-+ *
-+ * @retval NULL: Failed to find the TSEG reserved memory.
-+ * @retval others: TSEG reserved memory base.
-+ */
-+u32 fsp_get_tseg_reserved_mem(const void *hob_list, u32 *len);
-+
-+/**
-+ * Returns the next instance of a HOB type from the starting HOB.
-+ *
-+ * @type: HOB type to search
-+ * @hob_list: A pointer to the HOB list
-+ *
-+ * @retval: A HOB object with matching type; Otherwise NULL.
-+ */
-+void *fsp_get_next_hob(u16 type, const void *hob_list);
-+
-+/**
-+ * Returns the next instance of the matched GUID HOB from the starting HOB.
-+ *
-+ * @guid: GUID to search
-+ * @hob_list: A pointer to the HOB list
-+ *
-+ * @retval: A HOB object with matching GUID; Otherwise NULL.
-+ */
-+void *fsp_get_next_guid_hob(const struct efi_guid *guid, const void *hob_list);
-+
-+/**
-+ * This function retrieves a GUID HOB data buffer and size.
-+ *
-+ * @hob_list: A HOB list pointer.
-+ * @len: A pointer to the GUID HOB data buffer length.
-+ * If the GUID HOB is located, the length will be updated.
-+ * @guid A pointer to HOB GUID.
-+ *
-+ * @retval NULL: Failed to find the GUID HOB.
-+ * @retval others: GUID HOB data buffer pointer.
-+ */
-+void *fsp_get_guid_hob_data(const void *hob_list, u32 *len,
-+ struct efi_guid *guid);
-+
-+/**
-+ * This function retrieves FSP Non-volatile Storage HOB buffer and size.
-+ *
-+ * @hob_list: A HOB list pointer.
-+ * @len: A pointer to the NVS data buffer length.
-+ * If the HOB is located, the length will be updated.
-+ *
-+ * @retval NULL: Failed to find the NVS HOB.
-+ * @retval others: FSP NVS data buffer pointer.
-+ */
-+void *fsp_get_nvs_data(const void *hob_list, u32 *len);
-+
-+/**
-+ * This function retrieves Bootloader temporary stack buffer and size.
-+ *
-+ * @hob_list: A HOB list pointer.
-+ * @len: A pointer to the bootloader temporary stack length.
-+ * If the HOB is located, the length will be updated.
-+ *
-+ * @retval NULL: Failed to find the bootloader temporary stack HOB.
-+ * @retval others: Bootloader temporary stackbuffer pointer.
-+ */
-+void *fsp_get_bootloader_tmp_mem(const void *hob_list, u32 *len);
-+
-+/**
-+ * This function overrides the default configurations in the UPD data region.
-+ *
-+ * @fsp_upd: A pointer to the upd_region data strcture
-+ *
-+ * @return: None
-+ */
-+void update_fsp_upd(struct upd_region *fsp_upd);
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,82 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#ifndef __FSP_TYPES_H__
-+#define __FSP_TYPES_H__
-+
-+/* 128 bit buffer containing a unique identifier value */
-+struct efi_guid {
-+ u32 data1;
-+ u16 data2;
-+ u16 data3;
-+ u8 data4[8];
-+};
-+
-+/**
-+ * Returns a 16-bit signature built from 2 ASCII characters.
-+ *
-+ * This macro returns a 16-bit value built from the two ASCII characters
-+ * specified by A and B.
-+ *
-+ * @A: The first ASCII character.
-+ * @B: The second ASCII character.
-+ *
-+ * @return: A 16-bit value built from the two ASCII characters specified by
-+ * A and B.
-+ */
-+#define SIGNATURE_16(A, B) ((A) | (B << 8))
-+
-+/**
-+ * Returns a 32-bit signature built from 4 ASCII characters.
-+ *
-+ * This macro returns a 32-bit value built from the four ASCII characters
-+ * specified by A, B, C, and D.
-+ *
-+ * @A: The first ASCII character.
-+ * @B: The second ASCII character.
-+ * @C: The third ASCII character.
-+ * @D: The fourth ASCII character.
-+ *
-+ * @return: A 32-bit value built from the two ASCII characters specified by
-+ * A, B, C and D.
-+ */
-+#define SIGNATURE_32(A, B, C, D) \
-+ (SIGNATURE_16(A, B) | (SIGNATURE_16(C, D) << 16))
-+
-+/**
-+ * Returns a 64-bit signature built from 8 ASCII characters.
-+ *
-+ * This macro returns a 64-bit value built from the eight ASCII characters
-+ * specified by A, B, C, D, E, F, G,and H.
-+ *
-+ * @A: The first ASCII character.
-+ * @B: The second ASCII character.
-+ * @C: The third ASCII character.
-+ * @D: The fourth ASCII character.
-+ * @E: The fifth ASCII character.
-+ * @F: The sixth ASCII character.
-+ * @G: The seventh ASCII character.
-+ * @H: The eighth ASCII character.
-+ *
-+ * @return: A 64-bit value built from the two ASCII characters specified by
-+ * A, B, C, D, E, F, G and H.
-+ */
-+#define SIGNATURE_64(A, B, C, D, E, F, G, H) \
-+ (SIGNATURE_32(A, B, C, D) | ((u64)(SIGNATURE_32(E, F, G, H)) << 32))
-+
-+/*
-+ * Define FSP API return status code.
-+ * Compatiable with EFI_STATUS defined in PI Spec.
-+ */
-+#define FSP_SUCCESS 0
-+#define FSP_INVALID_PARAM 0x80000002
-+#define FSP_UNSUPPORTED 0x80000003
-+#define FSP_DEVICE_ERROR 0x80000007
-+#define FSP_NOT_FOUND 0x8000000E
-+#define FSP_ALREADY_STARTED 0x80000014
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,56 @@
-+/*
-+ * Copyright (C) 2013, Intel Corporation
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * This file is automatically generated. Please do NOT modify !!!
-+ *
-+ * SPDX-License-Identifier: Intel
-+ */
-+
-+#ifndef __VPDHEADER_H__
-+#define __VPDHEADER_H__
-+
-+#define UPD_TERMINATOR 0x55AA
-+
-+struct __packed upd_region {
-+ u64 sign; /* Offset 0x0000 */
-+ u64 reserved; /* Offset 0x0008 */
-+ u8 dummy[240]; /* Offset 0x0010 */
-+ u8 hda_verb_header[12]; /* Offset 0x0100 */
-+ u32 hda_verb_length; /* Offset 0x010C */
-+ u8 hda_verb_data0[16]; /* Offset 0x0110 */
-+ u8 hda_verb_data1[16]; /* Offset 0x0120 */
-+ u8 hda_verb_data2[16]; /* Offset 0x0130 */
-+ u8 hda_verb_data3[16]; /* Offset 0x0140 */
-+ u8 hda_verb_data4[16]; /* Offset 0x0150 */
-+ u8 hda_verb_data5[16]; /* Offset 0x0160 */
-+ u8 hda_verb_data6[16]; /* Offset 0x0170 */
-+ u8 hda_verb_data7[16]; /* Offset 0x0180 */
-+ u8 hda_verb_data8[16]; /* Offset 0x0190 */
-+ u8 hda_verb_data9[16]; /* Offset 0x01A0 */
-+ u8 hda_verb_data10[16]; /* Offset 0x01B0 */
-+ u8 hda_verb_data11[16]; /* Offset 0x01C0 */
-+ u8 hda_verb_data12[16]; /* Offset 0x01D0 */
-+ u8 hda_verb_data13[16]; /* Offset 0x01E0 */
-+ u8 hda_verb_pad[47]; /* Offset 0x01F0 */
-+ u16 terminator; /* Offset 0x021F */
-+};
-+
-+#define VPD_IMAGE_ID 0x445056574F4E4E4D /* 'MNNOWVPD' */
-+#define VPD_IMAGE_REV 0x00000301
-+
-+struct __packed vpd_region {
-+ u64 sign; /* Offset 0x0000 */
-+ u32 img_rev; /* Offset 0x0008 */
-+ u32 upd_offset; /* Offset 0x000C */
-+ u8 unused[16]; /* Offset 0x0010 */
-+ u32 fsp_res_memlen; /* Offset 0x0020 */
-+ u8 disable_pcie1; /* Offset 0x0024 */
-+ u8 disable_pcie2; /* Offset 0x0025 */
-+ u8 disable_pcie3; /* Offset 0x0026 */
-+ u8 enable_azalia; /* Offset 0x0027 */
-+ u8 legacy_seg_decode; /* Offset 0x0028 */
-+ u8 pcie_port_ioh; /* Offset 0x0029 */
-+};
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/gpio.h u-boot/arch/x86/include/asm/arch-queensbay/gpio.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/gpio.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/gpio.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,13 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _X86_ARCH_GPIO_H_
-+#define _X86_ARCH_GPIO_H_
-+
-+/* Where in config space is the register that points to the GPIO registers? */
-+#define PCI_CFG_GPIOBASE 0x44
-+
-+#endif /* _X86_ARCH_GPIO_H_ */
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/tnc.h u-boot/arch/x86/include/asm/arch-queensbay/tnc.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/tnc.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/arch-queensbay/tnc.h 2015-01-01 17:34:32.253503252 +0100
-@@ -0,0 +1,15 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _X86_ARCH_TNC_H_
-+#define _X86_ARCH_TNC_H_
-+
-+#include <pci.h>
-+
-+/* PCI Configuration Space (D31:F0): LPC */
-+#define PCH_LPC_DEV PCI_BDF(0, 0x1f, 0)
-+
-+#endif /* _X86_ARCH_TNC_H_ */
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/config.h u-boot/arch/x86/include/asm/config.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/config.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/include/asm/config.h 2015-01-01 17:34:32.257503186 +0100
-@@ -10,6 +10,5 @@
- #define CONFIG_SYS_GENERIC_BOARD
- #define CONFIG_LMB
- #define CONFIG_SYS_BOOT_RAMDISK_HIGH
--#define asmlinkage __attribute__((regparm(0)))
-
- #endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/global_data.h u-boot/arch/x86/include/asm/global_data.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/global_data.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/include/asm/global_data.h 2015-01-01 17:34:32.257503186 +0100
-@@ -47,6 +47,9 @@
- enum pei_boot_mode_t pei_boot_mode;
- const struct pch_gpio_map *gpio_map; /* board GPIO map */
- struct memory_info meminfo; /* Memory information */
-+#ifdef CONFIG_HAVE_FSP
-+ void *hob_list; /* FSP HOB list */
-+#endif
- };
-
- #endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/gpio.h u-boot/arch/x86/include/asm/gpio.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/gpio.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/include/asm/gpio.h 2015-01-01 17:34:32.257503186 +0100
-@@ -11,7 +11,7 @@
- #include <asm-generic/gpio.h>
-
- struct ich6_bank_platdata {
-- uint32_t base_addr;
-+ uint16_t base_addr;
- const char *bank_name;
- };
-
-@@ -147,6 +147,7 @@
- } set3;
- };
-
-+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio);
- void ich_gpio_set_gpio_map(const struct pch_gpio_map *map);
-
- #endif /* _X86_GPIO_H_ */
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/ibmpc.h u-boot/arch/x86/include/asm/ibmpc.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/ibmpc.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/include/asm/ibmpc.h 2015-01-01 17:34:32.257503186 +0100
-@@ -18,4 +18,7 @@
- #define SYSCTLA 0x92
- #define SLAVE_PIC 0xa0
-
-+#define UART0_BASE 0x3f8
-+#define UART1_BASE 0x2f8
-+
- #endif
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/linkage.h u-boot/arch/x86/include/asm/linkage.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/linkage.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/linkage.h 2015-01-01 17:34:32.257503186 +0100
-@@ -0,0 +1,6 @@
-+#ifndef _ASM_X86_LINKAGE_H
-+#define _ASM_X86_LINKAGE_H
-+
-+#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
-+
-+#endif /* _ASM_X86_LINKAGE_H */
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/pnp_def.h u-boot/arch/x86/include/asm/pnp_def.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/pnp_def.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/include/asm/pnp_def.h 2015-01-01 17:34:32.257503186 +0100
-@@ -0,0 +1,90 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * Adapted from coreboot src/include/device/pnp_def.h
-+ * and arch/x86/include/arch/io.h
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _ASM_PNP_DEF_H_
-+#define _ASM_PNP_DEF_H_
-+
-+#include <asm/io.h>
-+
-+#define PNP_IDX_EN 0x30
-+#define PNP_IDX_IO0 0x60
-+#define PNP_IDX_IO1 0x62
-+#define PNP_IDX_IO2 0x64
-+#define PNP_IDX_IO3 0x66
-+#define PNP_IDX_IRQ0 0x70
-+#define PNP_IDX_IRQ1 0x72
-+#define PNP_IDX_DRQ0 0x74
-+#define PNP_IDX_DRQ1 0x75
-+#define PNP_IDX_MSC0 0xf0
-+#define PNP_IDX_MSC1 0xf1
-+
-+/* Generic functions for pnp devices */
-+
-+/*
-+ * pnp device is a 16-bit integer composed of its i/o port address at high byte
-+ * and logic function number at low byte.
-+ */
-+#define PNP_DEV(PORT, FUNC) (((PORT) << 8) | (FUNC))
-+
-+static inline void pnp_write_config(uint16_t dev, uint8_t reg, uint8_t value)
-+{
-+ uint8_t port = dev >> 8;
-+
-+ outb(reg, port);
-+ outb(value, port + 1);
-+}
-+
-+static inline uint8_t pnp_read_config(uint16_t dev, uint8_t reg)
-+{
-+ uint8_t port = dev >> 8;
-+
-+ outb(reg, port);
-+ return inb(port + 1);
-+}
-+
-+static inline void pnp_set_logical_device(uint16_t dev)
-+{
-+ uint8_t device = dev & 0xff;
-+
-+ pnp_write_config(dev, 0x07, device);
-+}
-+
-+static inline void pnp_set_enable(uint16_t dev, int enable)
-+{
-+ pnp_write_config(dev, PNP_IDX_EN, enable ? 1 : 0);
-+}
-+
-+static inline int pnp_read_enable(uint16_t dev)
-+{
-+ return !!pnp_read_config(dev, PNP_IDX_EN);
-+}
-+
-+static inline void pnp_set_iobase(uint16_t dev, uint8_t index, uint16_t iobase)
-+{
-+ pnp_write_config(dev, index + 0, (iobase >> 8) & 0xff);
-+ pnp_write_config(dev, index + 1, iobase & 0xff);
-+}
-+
-+static inline uint16_t pnp_read_iobase(uint16_t dev, uint8_t index)
-+{
-+ return ((uint16_t)(pnp_read_config(dev, index)) << 8) |
-+ pnp_read_config(dev, index + 1);
-+}
-+
-+static inline void pnp_set_irq(uint16_t dev, uint8_t index, unsigned irq)
-+{
-+ pnp_write_config(dev, index, irq);
-+}
-+
-+static inline void pnp_set_drq(uint16_t dev, uint8_t index, unsigned drq)
-+{
-+ pnp_write_config(dev, index, drq & 0xff);
-+}
-+
-+#endif /* _ASM_PNP_DEF_H_ */
-diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/post.h u-boot/arch/x86/include/asm/post.h
---- u-boot-2015.01-rc3/arch/x86/include/asm/post.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/include/asm/post.h 2015-01-01 17:34:32.257503186 +0100
-@@ -33,6 +33,8 @@
- #define POST_LAPIC 0x30
-
- #define POST_RAM_FAILURE 0xea
-+#define POST_BIST_FAILURE 0xeb
-+#define POST_CAR_FAILURE 0xec
-
- /* Output a post code using al - value must be 0 to 0xff */
- #ifdef __ASSEMBLY__
-diff -ruN u-boot-2015.01-rc3/arch/x86/Kconfig u-boot/arch/x86/Kconfig
---- u-boot-2015.01-rc3/arch/x86/Kconfig 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/Kconfig 2015-01-01 17:34:32.249503317 +0100
-@@ -32,6 +32,15 @@
- and it provides a 2560x1700 high resolution touch-enabled LCD
- display.
-
-+config TARGET_CROWNBAY
-+ bool "Support Intel Crown Bay CRB"
-+ help
-+ This is the Intel Crown Bay Customer Reference Board. It contains
-+ the Intel Atom Processor E6xx populated on the COM Express module
-+ with 1GB DDR2 soldered down memory and a carrier board with the
-+ Intel Platform Controller Hub EG20T, other system components and
-+ peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
-+
- endchoice
-
- config RAMBASE
-@@ -61,9 +70,85 @@
- config SMM_TSEG_SIZE
- hex
-
-+config BOARD_ROMSIZE_KB_512
-+ bool
-+config BOARD_ROMSIZE_KB_1024
-+ bool
-+config BOARD_ROMSIZE_KB_2048
-+ bool
-+config BOARD_ROMSIZE_KB_4096
-+ bool
-+config BOARD_ROMSIZE_KB_8192
-+ bool
-+config BOARD_ROMSIZE_KB_16384
-+ bool
-+
-+choice
-+ prompt "ROM chip size"
-+ default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512
-+ default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024
-+ default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048
-+ default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096
-+ default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192
-+ default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384
-+ help
-+ Select the size of the ROM chip you intend to flash U-Boot on.
-+
-+ The build system will take care of creating a u-boot.rom file
-+ of the matching size.
-+
-+config UBOOT_ROMSIZE_KB_512
-+ bool "512 KB"
-+ help
-+ Choose this option if you have a 512 KB ROM chip.
-+
-+config UBOOT_ROMSIZE_KB_1024
-+ bool "1024 KB (1 MB)"
-+ help
-+ Choose this option if you have a 1024 KB (1 MB) ROM chip.
-+
-+config UBOOT_ROMSIZE_KB_2048
-+ bool "2048 KB (2 MB)"
-+ help
-+ Choose this option if you have a 2048 KB (2 MB) ROM chip.
-+
-+config UBOOT_ROMSIZE_KB_4096
-+ bool "4096 KB (4 MB)"
-+ help
-+ Choose this option if you have a 4096 KB (4 MB) ROM chip.
-+
-+config UBOOT_ROMSIZE_KB_8192
-+ bool "8192 KB (8 MB)"
-+ help
-+ Choose this option if you have a 8192 KB (8 MB) ROM chip.
-+
-+config UBOOT_ROMSIZE_KB_16384
-+ bool "16384 KB (16 MB)"
-+ help
-+ Choose this option if you have a 16384 KB (16 MB) ROM chip.
-+
-+endchoice
-+
-+# Map the config names to an integer (KB).
-+config UBOOT_ROMSIZE_KB
-+ int
-+ default 512 if UBOOT_ROMSIZE_KB_512
-+ default 1024 if UBOOT_ROMSIZE_KB_1024
-+ default 2048 if UBOOT_ROMSIZE_KB_2048
-+ default 4096 if UBOOT_ROMSIZE_KB_4096
-+ default 8192 if UBOOT_ROMSIZE_KB_8192
-+ default 16384 if UBOOT_ROMSIZE_KB_16384
-+
-+# Map the config names to a hex value (bytes).
- config ROM_SIZE
- hex
-- default 0x800000
-+ default 0x80000 if UBOOT_ROMSIZE_KB_512
-+ default 0x100000 if UBOOT_ROMSIZE_KB_1024
-+ default 0x200000 if UBOOT_ROMSIZE_KB_2048
-+ default 0x400000 if UBOOT_ROMSIZE_KB_4096
-+ default 0x800000 if UBOOT_ROMSIZE_KB_8192
-+ default 0xc00000 if UBOOT_ROMSIZE_KB_12288
-+ default 0x1000000 if UBOOT_ROMSIZE_KB_16384
-
- config HAVE_INTEL_ME
- bool "Platform requires Intel Management Engine"
-@@ -234,8 +319,12 @@
-
- source "arch/x86/cpu/ivybridge/Kconfig"
-
-+source "arch/x86/cpu/queensbay/Kconfig"
-+
- source "board/coreboot/coreboot/Kconfig"
-
- source "board/google/chromebook_link/Kconfig"
-
-+source "board/intel/crownbay/Kconfig"
-+
- endmenu
-diff -ruN u-boot-2015.01-rc3/arch/x86/lib/asm-offsets.c u-boot/arch/x86/lib/asm-offsets.c
---- u-boot-2015.01-rc3/arch/x86/lib/asm-offsets.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/lib/asm-offsets.c 2015-01-01 17:34:32.257503186 +0100
-@@ -17,6 +17,9 @@
-
- int main(void)
- {
-- DEFINE(GENERATED_GD_RELOC_OFF, offsetof(gd_t, reloc_off));
-+ DEFINE(GD_BIST, offsetof(gd_t, arch.bist));
-+#ifdef CONFIG_HAVE_FSP
-+ DEFINE(GD_HOB_LIST, offsetof(gd_t, arch.hob_list));
-+#endif
- return 0;
- }
-diff -ruN u-boot-2015.01-rc3/arch/x86/lib/bios.c u-boot/arch/x86/lib/bios.c
---- u-boot-2015.01-rc3/arch/x86/lib/bios.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/lib/bios.c 2015-01-01 17:34:32.257503186 +0100
-@@ -9,6 +9,7 @@
- #include <common.h>
- #include <bios_emul.h>
- #include <vbe.h>
-+#include <linux/linkage.h>
- #include <asm/cache.h>
- #include <asm/processor.h>
- #include <asm/i8259.h>
-diff -ruN u-boot-2015.01-rc3/arch/x86/lib/bios.h u-boot/arch/x86/lib/bios.h
---- u-boot-2015.01-rc3/arch/x86/lib/bios.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/lib/bios.h 2015-01-01 17:34:32.257503186 +0100
-@@ -10,6 +10,8 @@
- #ifndef _X86_LIB_BIOS_H
- #define _X86_LIB_BIOS_H
-
-+#include <linux/linkage.h>
-+
- #define REALMODE_BASE 0x600
-
- #ifdef __ASSEMBLY__
-diff -ruN u-boot-2015.01-rc3/arch/x86/lib/cmd_hob.c u-boot/arch/x86/lib/cmd_hob.c
---- u-boot-2015.01-rc3/arch/x86/lib/cmd_hob.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/arch/x86/lib/cmd_hob.c 2015-01-01 17:34:32.257503186 +0100
-@@ -0,0 +1,65 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <command.h>
-+#include <linux/compiler.h>
-+#include <asm/arch/fsp/fsp_support.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+static char *hob_type[] = {
-+ "reserved",
-+ "Hand-off",
-+ "Memory Allocation",
-+ "Resource Descriptor",
-+ "GUID Extension",
-+ "Firmware Volume",
-+ "CPU",
-+ "Memory Pool",
-+ "reserved",
-+ "Firmware Volume 2",
-+ "Load PEIM Unused",
-+ "UEFI Capsule",
-+};
-+
-+int do_hob(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-+{
-+ union hob_pointers hob;
-+ u16 type;
-+ char *desc;
-+ int i = 0;
-+
-+ hob.raw = (u8 *)gd->arch.hob_list;
-+
-+ printf("HOB list address: 0x%08x\n\n", (unsigned int)hob.raw);
-+
-+ printf("No. | Address | Type | Length in Bytes\n");
-+ printf("----|----------|---------------------|----------------\n");
-+ while (!end_of_hob(hob)) {
-+ printf("%-3d | %08x | ", i, (unsigned int)hob.raw);
-+ type = get_hob_type(hob);
-+ if (type == HOB_TYPE_UNUSED)
-+ desc = "*Unused*";
-+ else if (type == HOB_TYPE_EOH)
-+ desc = "*END OF HOB*";
-+ else if (type >= 0 && type <= ARRAY_SIZE(hob_type))
-+ desc = hob_type[type];
-+ else
-+ desc = "*Invalid Type*";
-+ printf("%-19s | %-15d\n", desc, get_hob_length(hob));
-+ hob.raw = get_next_hob(hob);
-+ i++;
-+ }
-+
-+ return 0;
-+}
-+
-+U_BOOT_CMD(
-+ hob, 1, 1, do_hob,
-+ "print Firmware Support Package (FSP) Hand-Off Block information",
-+ ""
-+);
-diff -ruN u-boot-2015.01-rc3/arch/x86/lib/Makefile u-boot/arch/x86/lib/Makefile
---- u-boot-2015.01-rc3/arch/x86/lib/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/arch/x86/lib/Makefile 2015-01-01 17:34:32.257503186 +0100
-@@ -10,6 +10,7 @@
- obj-y += bios_interrupts.o
- obj-$(CONFIG_CMD_BOOTM) += bootm.o
- obj-y += cmd_boot.o
-+obj-$(CONFIG_HAVE_FSP) += cmd_hob.o
- obj-y += gcc.o
- obj-y += init_helpers.o
- obj-y += interrupts.o
-diff -ruN u-boot-2015.01-rc3/board/altera/socfpga/MAINTAINERS u-boot/board/altera/socfpga/MAINTAINERS
---- u-boot-2015.01-rc3/board/altera/socfpga/MAINTAINERS 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/altera/socfpga/MAINTAINERS 2015-01-01 17:34:32.269502990 +0100
-@@ -5,3 +5,8 @@
- F: board/altera/socfpga/
- F: include/configs/socfpga_cyclone5.h
- F: configs/socfpga_cyclone5_defconfig
-+
-+SOCRATES BOARD
-+M: Stefan Roese <sr@denx.de>
-+S: Maintained
-+F: configs/socfpga_socrates_defconfig
-diff -ruN u-boot-2015.01-rc3/board/altera/socfpga/socfpga_cyclone5.c u-boot/board/altera/socfpga/socfpga_cyclone5.c
---- u-boot-2015.01-rc3/board/altera/socfpga/socfpga_cyclone5.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/altera/socfpga/socfpga_cyclone5.c 2015-01-01 17:34:32.273502924 +0100
-@@ -12,7 +12,9 @@
- #include <usb/s3c_udc.h>
- #include <usb_mass_storage.h>
-
-+#include <micrel.h>
- #include <netdev.h>
-+#include <phy.h>
-
- DECLARE_GLOBAL_DATA_PTR;
-
-@@ -44,6 +46,42 @@
- return 0;
- }
-
-+/*
-+ * PHY configuration
-+ */
-+#ifdef CONFIG_PHY_MICREL_KSZ9021
-+int board_phy_config(struct phy_device *phydev)
-+{
-+ int ret;
-+ /*
-+ * These skew settings for the KSZ9021 ethernet phy is required for ethernet
-+ * to work reliably on most flavors of cyclone5 boards.
-+ */
-+ ret = ksz9021_phy_extended_write(phydev,
-+ MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
-+ 0x0);
-+ if (ret)
-+ return ret;
-+
-+ ret = ksz9021_phy_extended_write(phydev,
-+ MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
-+ 0x0);
-+ if (ret)
-+ return ret;
-+
-+ ret = ksz9021_phy_extended_write(phydev,
-+ MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
-+ 0xf0f0);
-+ if (ret)
-+ return ret;
-+
-+ if (phydev->drv->config)
-+ return phydev->drv->config(phydev);
-+
-+ return 0;
-+}
-+#endif
-+
- #ifdef CONFIG_USB_GADGET
- struct s3c_plat_otg_data socfpga_otg_data = {
- .regs_otg = CONFIG_USB_DWC2_REG_ADDR,
-diff -ruN u-boot-2015.01-rc3/board/aristainetos/aristainetos.c u-boot/board/aristainetos/aristainetos.c
---- u-boot-2015.01-rc3/board/aristainetos/aristainetos.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/aristainetos/aristainetos.c 2015-01-01 17:34:32.281502792 +0100
-@@ -301,7 +301,7 @@
- /* clear gpr1[14], gpr1[18:17] to select anatop clock */
- clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
-
-- ret = enable_fec_anatop_clock(ENET_50MHz);
-+ ret = enable_fec_anatop_clock(ENET_50MHZ);
- if (ret)
- return ret;
-
-diff -ruN u-boot-2015.01-rc3/board/armltd/vexpress64/MAINTAINERS u-boot/board/armltd/vexpress64/MAINTAINERS
---- u-boot-2015.01-rc3/board/armltd/vexpress64/MAINTAINERS 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/armltd/vexpress64/MAINTAINERS 2015-01-01 17:34:32.281502792 +0100
-@@ -6,6 +6,6 @@
- F: configs/vexpress_aemv8a_defconfig
-
- VEXPRESS_AEMV8A_SEMI BOARD
--M: Steve Rae <srae@broadcom.com>
-+M: Linus Walleij <linus.walleij@linaro.org>
- S: Maintained
- F: configs/vexpress_aemv8a_semi_defconfig
-diff -ruN u-boot-2015.01-rc3/board/avionic-design/common/tamonten-ng.c u-boot/board/avionic-design/common/tamonten-ng.c
---- u-boot-2015.01-rc3/board/avionic-design/common/tamonten-ng.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/avionic-design/common/tamonten-ng.c 2015-01-01 17:34:32.285502727 +0100
-@@ -6,6 +6,7 @@
- */
-
- #include <common.h>
-+#include <dm.h>
- #include <asm/arch/pinmux.h>
- #include <asm/arch/gp_padctrl.h>
- #include <asm/arch/gpio.h>
-@@ -51,8 +52,15 @@
-
- void pmu_write(uchar reg, uchar data)
- {
-- i2c_set_bus_num(4); /* PMU is on bus 4 */
-- i2c_write(PMU_I2C_ADDRESS, reg, 1, &data, 1);
-+ struct udevice *dev;
-+ int ret;
-+
-+ ret = i2c_get_chip_for_busnum(4, PMU_I2C_ADDRESS, &dev);
-+ if (ret) {
-+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
-+ return;
-+ }
-+ i2c_write(dev, reg, &data, 1);
- }
-
- /*
-diff -ruN u-boot-2015.01-rc3/board/coreboot/coreboot/coreboot.c u-boot/board/coreboot/coreboot/coreboot.c
---- u-boot-2015.01-rc3/board/coreboot/coreboot/coreboot.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/coreboot/coreboot/coreboot.c 2015-01-01 17:34:32.305502399 +0100
-@@ -6,6 +6,7 @@
-
- #include <common.h>
- #include <cros_ec.h>
-+#include <asm/gpio.h>
-
- int arch_early_init_r(void)
- {
-@@ -14,3 +15,8 @@
-
- return 0;
- }
-+
-+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
-+{
-+ return;
-+}
-diff -ruN u-boot-2015.01-rc3/board/freescale/common/arm_sleep.c u-boot/board/freescale/common/arm_sleep.c
---- u-boot-2015.01-rc3/board/freescale/common/arm_sleep.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/freescale/common/arm_sleep.c 2015-01-01 17:34:32.357501547 +0100
-@@ -0,0 +1,95 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#if !defined(CONFIG_ARMV7_NONSEC) || !defined(CONFIG_ARMV7_VIRT)
-+#error " Deep sleep needs non-secure mode support. "
-+#else
-+#include <asm/secure.h>
-+#endif
-+#include <asm/armv7.h>
-+#include <asm/cache.h>
-+
-+#if defined(CONFIG_LS102XA)
-+#include <asm/arch/immap_ls102xa.h>
-+#endif
-+
-+#include "sleep.h"
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+void __weak board_mem_sleep_setup(void)
-+{
-+}
-+
-+void __weak board_sleep_prepare(void)
-+{
-+}
-+
-+bool is_warm_boot(void)
-+{
-+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
-+
-+ if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+void fsl_dp_disable_console(void)
-+{
-+ gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
-+}
-+
-+/*
-+ * When wakeup from deep sleep, the first 128 bytes space
-+ * will be used to do DDR training which corrupts the data
-+ * in there. This function will restore them.
-+ */
-+static void dp_ddr_restore(void)
-+{
-+ u64 *src, *dst;
-+ int i;
-+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
-+
-+ /* get the address of ddr date from SPARECR3 */
-+ src = (u64 *)in_le32(&scfg->sparecr[2]);
-+ dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
-+
-+ for (i = 0; i < DDR_BUFF_LEN / 8; i++)
-+ *dst++ = *src++;
-+
-+ flush_dcache_all();
-+}
-+
-+static void dp_resume_prepare(void)
-+{
-+ dp_ddr_restore();
-+ board_sleep_prepare();
-+ armv7_init_nonsec();
-+ cleanup_before_linux();
-+}
-+
-+int fsl_dp_resume(void)
-+{
-+ u32 start_addr;
-+ void (*kernel_resume)(void);
-+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
-+
-+ if (!is_warm_boot())
-+ return 0;
-+
-+ dp_resume_prepare();
-+
-+ /* Get the entry address and jump to kernel */
-+ start_addr = in_le32(&scfg->sparecr[1]);
-+ debug("Entry address is 0x%08x\n", start_addr);
-+ kernel_resume = (void (*)(void))start_addr;
-+ secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0);
-+
-+ return 0;
-+}
-diff -ruN u-boot-2015.01-rc3/board/freescale/common/ls102xa_stream_id.c u-boot/board/freescale/common/ls102xa_stream_id.c
---- u-boot-2015.01-rc3/board/freescale/common/ls102xa_stream_id.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/freescale/common/ls102xa_stream_id.c 2015-01-01 17:34:32.357501547 +0100
-@@ -0,0 +1,18 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/ls102xa_stream_id.h>
-+
-+void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
-+{
-+ uint32_t *scfg = (uint32_t *)CONFIG_SYS_FSL_SCFG_ADDR;
-+ int i;
-+
-+ for (i = 0; i < num; i++)
-+ out_be32(scfg + id[i].offset, id[i].stream_id);
-+}
-diff -ruN u-boot-2015.01-rc3/board/freescale/common/Makefile u-boot/board/freescale/common/Makefile
---- u-boot-2015.01-rc3/board/freescale/common/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/common/Makefile 2015-01-01 17:34:32.357501547 +0100
-@@ -37,6 +37,12 @@
-
- obj-$(CONFIG_FSL_DIU_CH7301) += diu_ch7301.o
-
-+ifdef CONFIG_ARM
-+obj-$(CONFIG_DEEP_SLEEP) += arm_sleep.o
-+else
-+obj-$(CONFIG_DEEP_SLEEP) += mpc85xx_sleep.o
-+endif
-+
- obj-$(CONFIG_FSL_DCU_SII9022A) += dcu_sii9022a.o
-
- obj-$(CONFIG_MPC8541CDS) += cds_pci_ft.o
-@@ -56,10 +62,14 @@
- obj-$(CONFIG_ZM7300) += zm7300.o
- obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
-
-+obj-$(CONFIG_LS102XA_STREAM_ID) += ls102xa_stream_id.o
-+
- # deal with common files for P-series corenet based devices
- obj-$(CONFIG_P2041RDB) += p_corenet/
- obj-$(CONFIG_P3041DS) += p_corenet/
- obj-$(CONFIG_P4080DS) += p_corenet/
- obj-$(CONFIG_P5020DS) += p_corenet/
- obj-$(CONFIG_P5040DS) += p_corenet/
-+
-+obj-$(CONFIG_LS102XA_NS_ACCESS) += ns_access.o
- endif
-diff -ruN u-boot-2015.01-rc3/board/freescale/common/mpc85xx_sleep.c u-boot/board/freescale/common/mpc85xx_sleep.c
---- u-boot-2015.01-rc3/board/freescale/common/mpc85xx_sleep.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/freescale/common/mpc85xx_sleep.c 2015-01-01 17:34:32.357501547 +0100
-@@ -0,0 +1,88 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/immap_85xx.h>
-+#include "sleep.h"
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+void __weak board_mem_sleep_setup(void)
-+{
-+}
-+
-+void __weak board_sleep_prepare(void)
-+{
-+}
-+
-+bool is_warm_boot(void)
-+{
-+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-+
-+ if (in_be32(&gur->scrtsr[0]) & DCFG_CCSR_CRSTSR_WDRFR)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+void fsl_dp_disable_console(void)
-+{
-+ gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
-+}
-+
-+/*
-+ * When wakeup from deep sleep, the first 128 bytes space
-+ * will be used to do DDR training which corrupts the data
-+ * in there. This function will restore them.
-+ */
-+static void dp_ddr_restore(void)
-+{
-+ volatile u64 *src, *dst;
-+ int i;
-+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
-+
-+ /* get the address of ddr date from SPARECR3 */
-+ src = (u64 *)in_be32(&scfg->sparecr[2]);
-+ dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
-+
-+ for (i = 0; i < DDR_BUFF_LEN / 8; i++)
-+ *dst++ = *src++;
-+
-+ flush_dcache();
-+}
-+
-+static void dp_resume_prepare(void)
-+{
-+ dp_ddr_restore();
-+
-+ board_sleep_prepare();
-+
-+ l2cache_init();
-+#if defined(CONFIG_RAMBOOT_PBL)
-+ disable_cpc_sram();
-+#endif
-+ enable_cpc();
-+}
-+
-+int fsl_dp_resume(void)
-+{
-+ u32 start_addr;
-+ void (*kernel_resume)(void);
-+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
-+
-+ if (!is_warm_boot())
-+ return 0;
-+
-+ dp_resume_prepare();
-+
-+ /* Get the entry address and jump to kernel */
-+ start_addr = in_be32(&scfg->sparecr[1]);
-+ debug("Entry address is 0x%08x\n", start_addr);
-+ kernel_resume = (void (*)(void))start_addr;
-+ kernel_resume();
-+
-+ return 0;
-+}
-diff -ruN u-boot-2015.01-rc3/board/freescale/common/ns_access.c u-boot/board/freescale/common/ns_access.c
---- u-boot-2015.01-rc3/board/freescale/common/ns_access.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/freescale/common/ns_access.c 2015-01-01 17:34:32.357501547 +0100
-@@ -0,0 +1,30 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/ns_access.h>
-+
-+void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
-+{
-+ u32 *base = (u32 *)CONFIG_SYS_FSL_CSU_ADDR;
-+ u32 *reg;
-+ uint32_t val;
-+ int i;
-+
-+ for (i = 0; i < num; i++) {
-+ reg = base + ns_dev[i].ind / 2;
-+ val = in_be32(reg);
-+ if (ns_dev[i].ind % 2 == 0) {
-+ val &= 0x0000ffff;
-+ val |= ns_dev[i].val << 16;
-+ } else {
-+ val &= 0xffff0000;
-+ val |= ns_dev[i].val;
-+ }
-+ out_be32(reg, val);
-+ }
-+}
-diff -ruN u-boot-2015.01-rc3/board/freescale/common/qixis.h u-boot/board/freescale/common/qixis.h
---- u-boot-2015.01-rc3/board/freescale/common/qixis.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/common/qixis.h 2015-01-01 17:34:32.357501547 +0100
-@@ -100,8 +100,15 @@
- void qixis_write_i2c(unsigned int reg, u8 value);
- #endif
-
-+#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CONFIG_SYS_I2C_FPGA_ADDR)
-+#define QIXIS_READ(reg) qixis_read_i2c(offsetof(struct qixis, reg))
-+#define QIXIS_WRITE(reg, value) \
-+ qixis_write_i2c(offsetof(struct qixis, reg), value)
-+#else
- #define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
- #define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
-+#endif
-+
- #ifdef CONFIG_SYS_I2C_FPGA_ADDR
- #define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
- #define QIXIS_WRITE_I2C(reg, value) \
-diff -ruN u-boot-2015.01-rc3/board/freescale/common/sleep.h u-boot/board/freescale/common/sleep.h
---- u-boot-2015.01-rc3/board/freescale/common/sleep.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/freescale/common/sleep.h 2015-01-01 17:34:32.357501547 +0100
-@@ -0,0 +1,21 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __SLEEP_H
-+#define __SLEEP_H
-+
-+#define DCFG_CCSR_CRSTSR_WDRFR (1 << 3)
-+#define DDR_BUFF_LEN 128
-+
-+/* determine if it is a wakeup from deep sleep */
-+bool is_warm_boot(void);
-+
-+/* disable console output */
-+void fsl_dp_disable_console(void);
-+
-+/* clean up everything and jump to kernel */
-+int fsl_dp_resume(void);
-+#endif
-diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ddr.c u-boot/board/freescale/ls1021aqds/ddr.c
---- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ddr.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/ls1021aqds/ddr.c 2015-01-01 17:34:32.361501481 +0100
-@@ -153,9 +153,12 @@
- {
- phys_size_t dram_size;
-
-+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
- puts("Initializing DDR....using SPD\n");
- dram_size = fsl_ddr_sdram();
--
-+#else
-+ dram_size = fsl_ddr_sdram_size();
-+#endif
- return dram_size;
- }
-
-diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls1021aqds.c u-boot/board/freescale/ls1021aqds/ls1021aqds.c
---- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls1021aqds.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/ls1021aqds/ls1021aqds.c 2015-01-01 17:34:32.361501481 +0100
-@@ -8,12 +8,17 @@
- #include <i2c.h>
- #include <asm/io.h>
- #include <asm/arch/immap_ls102xa.h>
-+#include <asm/arch/ns_access.h>
- #include <asm/arch/clock.h>
- #include <asm/arch/fsl_serdes.h>
-+#include <asm/arch/ls102xa_stream_id.h>
-+#include <asm/pcie_layerscape.h>
-+#include <hwconfig.h>
- #include <mmc.h>
- #include <fsl_esdhc.h>
- #include <fsl_ifc.h>
- #include <fsl_sec.h>
-+#include <spl.h>
-
- #include "../common/qixis.h"
- #include "ls1021aqds_qixis.h"
-@@ -21,9 +26,22 @@
- #include "../../../drivers/qe/qe.h"
- #endif
-
-+#define PIN_MUX_SEL_CAN 0x03
-+#define PIN_MUX_SEL_IIC2 0xa0
-+#define PIN_MUX_SEL_RGMII 0x00
-+#define PIN_MUX_SEL_SAI 0x0c
-+#define PIN_MUX_SEL_SDHC 0x00
-+
-+#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0x0f) | value)
-+#define SET_EC_MUX_SEL(reg, value) ((reg & 0xf0) | value)
- DECLARE_GLOBAL_DATA_PTR;
-
- enum {
-+ MUX_TYPE_CAN,
-+ MUX_TYPE_IIC2,
-+ MUX_TYPE_RGMII,
-+ MUX_TYPE_SAI,
-+ MUX_TYPE_SDHC,
- MUX_TYPE_SD_PCI4,
- MUX_TYPE_SD_PC_SA_SG_SG,
- MUX_TYPE_SD_PC_SA_PC_SG,
-@@ -32,11 +50,20 @@
-
- int checkboard(void)
- {
-+#ifndef CONFIG_QSPI_BOOT
- char buf[64];
-+#endif
-+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
- u8 sw;
-+#endif
-
- puts("Board: LS1021AQDS\n");
-
-+#ifdef CONFIG_SD_BOOT
-+ puts("SD\n");
-+#elif CONFIG_QSPI_BOOT
-+ puts("QSPI\n");
-+#else
- sw = QIXIS_READ(brdcfg[0]);
- sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
-
-@@ -50,13 +77,16 @@
- printf("IFCCard\n");
- else
- printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
-+#endif
-
-+#ifndef CONFIG_QSPI_BOOT
- printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n",
- QIXIS_READ(id), QIXIS_READ(arch));
-
- printf("FPGA: v%d (%s), build %d\n",
- (int)QIXIS_READ(scver), qixis_read_tag(buf),
- (int)qixis_read_minor());
-+#endif
-
- return 0;
- }
-@@ -101,8 +131,27 @@
- return 66666666;
- }
-
-+int select_i2c_ch_pca9547(u8 ch)
-+{
-+ int ret;
-+
-+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
-+ if (ret) {
-+ puts("PCA: failed to select proper channel\n");
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
- int dram_init(void)
- {
-+ /*
-+ * When resuming from deep sleep, the I2C channel may not be
-+ * in the default channel. So, switch to the default channel
-+ * before accessing DDR SPD.
-+ */
-+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
- gd->ram_size = initdram(0);
-
- return 0;
-@@ -121,19 +170,6 @@
- }
- #endif
-
--int select_i2c_ch_pca9547(u8 ch)
--{
-- int ret;
--
-- ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
-- if (ret) {
-- puts("PCA: failed to select proper channel\n");
-- return ret;
-- }
--
-- return 0;
--}
--
- int board_early_init_f(void)
- {
- struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
-@@ -148,6 +184,10 @@
- init_early_memctl_regs();
- #endif
-
-+#ifdef CONFIG_FSL_QSPI
-+ out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
-+#endif
-+
- /* Workaround for the issue that DDR could not respond to
- * barrier transaction which is generated by executing DSB/ISB
- * instruction. Set CCI-400 control override register to
-@@ -158,13 +198,75 @@
- return 0;
- }
-
-+#ifdef CONFIG_SPL_BUILD
-+void board_init_f(ulong dummy)
-+{
-+ struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
-+
-+#ifdef CONFIG_NAND_BOOT
-+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
-+ u32 porsr1, pinctl;
-+
-+ /*
-+ * There is LS1 SoC issue where NOR, FPGA are inaccessible during
-+ * NAND boot because IFC signals > IFC_AD7 are not enabled.
-+ * This workaround changes RCW source to make all signals enabled.
-+ */
-+ porsr1 = in_be32(&gur->porsr1);
-+ pinctl = ((porsr1 & ~(DCFG_CCSR_PORSR1_RCW_MASK)) |
-+ DCFG_CCSR_PORSR1_RCW_SRC_I2C);
-+ out_be32((unsigned int *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
-+ pinctl);
-+#endif
-+
-+ /* Set global data pointer */
-+ gd = &gdata;
-+
-+ /* Clear the BSS */
-+ memset(__bss_start, 0, __bss_end - __bss_start);
-+
-+#ifdef CONFIG_FSL_IFC
-+ init_early_memctl_regs();
-+#endif
-+
-+ get_clocks();
-+
-+ preloader_console_init();
-+
-+#ifdef CONFIG_SPL_I2C_SUPPORT
-+ i2c_init_all();
-+#endif
-+ out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
-+
-+ dram_init();
-+
-+ board_init_r(NULL, 0);
-+}
-+#endif
-+
- int config_board_mux(int ctrl_type)
- {
-- u8 reg12;
-+ u8 reg12, reg14;
-
- reg12 = QIXIS_READ(brdcfg[12]);
-+ reg14 = QIXIS_READ(brdcfg[14]);
-
- switch (ctrl_type) {
-+ case MUX_TYPE_CAN:
-+ reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN);
-+ break;
-+ case MUX_TYPE_IIC2:
-+ reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_IIC2);
-+ break;
-+ case MUX_TYPE_RGMII:
-+ reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII);
-+ break;
-+ case MUX_TYPE_SAI:
-+ reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI);
-+ break;
-+ case MUX_TYPE_SDHC:
-+ reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_SDHC);
-+ break;
- case MUX_TYPE_SD_PCI4:
- reg12 = 0x38;
- break;
-@@ -183,6 +285,7 @@
- }
-
- QIXIS_WRITE(brdcfg[12], reg12);
-+ QIXIS_WRITE(brdcfg[14], reg14);
-
- return 0;
- }
-@@ -216,15 +319,154 @@
- return 0;
- }
-
--#if defined(CONFIG_MISC_INIT_R)
- int misc_init_r(void)
- {
-+ int conflict_flag;
-+
-+ /* some signals can not enable simultaneous*/
-+ conflict_flag = 0;
-+ if (hwconfig("sdhc"))
-+ conflict_flag++;
-+ if (hwconfig("iic2"))
-+ conflict_flag++;
-+ if (conflict_flag > 1) {
-+ printf("WARNING: pin conflict !\n");
-+ return 0;
-+ }
-+
-+ conflict_flag = 0;
-+ if (hwconfig("rgmii"))
-+ conflict_flag++;
-+ if (hwconfig("can"))
-+ conflict_flag++;
-+ if (hwconfig("sai"))
-+ conflict_flag++;
-+ if (conflict_flag > 1) {
-+ printf("WARNING: pin conflict !\n");
-+ return 0;
-+ }
-+
-+ if (hwconfig("can"))
-+ config_board_mux(MUX_TYPE_CAN);
-+ else if (hwconfig("rgmii"))
-+ config_board_mux(MUX_TYPE_RGMII);
-+ else if (hwconfig("sai"))
-+ config_board_mux(MUX_TYPE_SAI);
-+
-+ if (hwconfig("iic2"))
-+ config_board_mux(MUX_TYPE_IIC2);
-+ else if (hwconfig("sdhc"))
-+ config_board_mux(MUX_TYPE_SDHC);
-+
- #ifdef CONFIG_FSL_CAAM
- return sec_init();
- #endif
-+ return 0;
- }
-+
-+#ifdef CONFIG_LS102XA_NS_ACCESS
-+static struct csu_ns_dev ns_dev[] = {
-+ { CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
-+ { CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
-+ { CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
-+ { CSU_CSLX_IFC_MEM, CSU_ALL_RW },
-+ { CSU_CSLX_OCRAM, CSU_ALL_RW },
-+ { CSU_CSLX_GIC, CSU_ALL_RW },
-+ { CSU_CSLX_PCIE1, CSU_ALL_RW },
-+ { CSU_CSLX_OCRAM2, CSU_ALL_RW },
-+ { CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
-+ { CSU_CSLX_PCIE2, CSU_ALL_RW },
-+ { CSU_CSLX_SATA, CSU_ALL_RW },
-+ { CSU_CSLX_USB3, CSU_ALL_RW },
-+ { CSU_CSLX_SERDES, CSU_ALL_RW },
-+ { CSU_CSLX_QDMA, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART2, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART1, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART4, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART3, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART6, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART5, CSU_ALL_RW },
-+ { CSU_CSLX_DSPI2, CSU_ALL_RW },
-+ { CSU_CSLX_DSPI1, CSU_ALL_RW },
-+ { CSU_CSLX_QSPI, CSU_ALL_RW },
-+ { CSU_CSLX_ESDHC, CSU_ALL_RW },
-+ { CSU_CSLX_2D_ACE, CSU_ALL_RW },
-+ { CSU_CSLX_IFC, CSU_ALL_RW },
-+ { CSU_CSLX_I2C1, CSU_ALL_RW },
-+ { CSU_CSLX_USB2, CSU_ALL_RW },
-+ { CSU_CSLX_I2C3, CSU_ALL_RW },
-+ { CSU_CSLX_I2C2, CSU_ALL_RW },
-+ { CSU_CSLX_DUART2, CSU_ALL_RW },
-+ { CSU_CSLX_DUART1, CSU_ALL_RW },
-+ { CSU_CSLX_WDT2, CSU_ALL_RW },
-+ { CSU_CSLX_WDT1, CSU_ALL_RW },
-+ { CSU_CSLX_EDMA, CSU_ALL_RW },
-+ { CSU_CSLX_SYS_CNT, CSU_ALL_RW },
-+ { CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
-+ { CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
-+ { CSU_CSLX_DDR, CSU_ALL_RW },
-+ { CSU_CSLX_QUICC, CSU_ALL_RW },
-+ { CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
-+ { CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
-+ { CSU_CSLX_SFP, CSU_ALL_RW },
-+ { CSU_CSLX_TMU, CSU_ALL_RW },
-+ { CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
-+ { CSU_CSLX_RESERVED0, CSU_ALL_RW },
-+ { CSU_CSLX_ETSEC1, CSU_ALL_RW },
-+ { CSU_CSLX_SEC5_5, CSU_ALL_RW },
-+ { CSU_CSLX_ETSEC3, CSU_ALL_RW },
-+ { CSU_CSLX_ETSEC2, CSU_ALL_RW },
-+ { CSU_CSLX_GPIO2, CSU_ALL_RW },
-+ { CSU_CSLX_GPIO1, CSU_ALL_RW },
-+ { CSU_CSLX_GPIO4, CSU_ALL_RW },
-+ { CSU_CSLX_GPIO3, CSU_ALL_RW },
-+ { CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
-+ { CSU_CSLX_CSU, CSU_ALL_RW },
-+ { CSU_CSLX_ASRC, CSU_ALL_RW },
-+ { CSU_CSLX_SPDIF, CSU_ALL_RW },
-+ { CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
-+ { CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
-+ { CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
-+ { CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
-+ { CSU_CSLX_SAI2, CSU_ALL_RW },
-+ { CSU_CSLX_SAI1, CSU_ALL_RW },
-+ { CSU_CSLX_SAI4, CSU_ALL_RW },
-+ { CSU_CSLX_SAI3, CSU_ALL_RW },
-+ { CSU_CSLX_FTM2, CSU_ALL_RW },
-+ { CSU_CSLX_FTM1, CSU_ALL_RW },
-+ { CSU_CSLX_FTM4, CSU_ALL_RW },
-+ { CSU_CSLX_FTM3, CSU_ALL_RW },
-+ { CSU_CSLX_FTM6, CSU_ALL_RW },
-+ { CSU_CSLX_FTM5, CSU_ALL_RW },
-+ { CSU_CSLX_FTM8, CSU_ALL_RW },
-+ { CSU_CSLX_FTM7, CSU_ALL_RW },
-+ { CSU_CSLX_COP_DCSR, CSU_ALL_RW },
-+ { CSU_CSLX_EPU, CSU_ALL_RW },
-+ { CSU_CSLX_GDI, CSU_ALL_RW },
-+ { CSU_CSLX_DDI, CSU_ALL_RW },
-+ { CSU_CSLX_RESERVED1, CSU_ALL_RW },
-+ { CSU_CSLX_USB3_PHY, CSU_ALL_RW },
-+ { CSU_CSLX_RESERVED2, CSU_ALL_RW },
-+};
- #endif
-
-+struct smmu_stream_id dev_stream_id[] = {
-+ { 0x100, 0x01, "ETSEC MAC1" },
-+ { 0x104, 0x02, "ETSEC MAC2" },
-+ { 0x108, 0x03, "ETSEC MAC3" },
-+ { 0x10c, 0x04, "PEX1" },
-+ { 0x110, 0x05, "PEX2" },
-+ { 0x114, 0x06, "qDMA" },
-+ { 0x118, 0x07, "SATA" },
-+ { 0x11c, 0x08, "USB3" },
-+ { 0x120, 0x09, "QE" },
-+ { 0x124, 0x0a, "eSDHC" },
-+ { 0x128, 0x0b, "eMA" },
-+ { 0x14c, 0x0c, "2D-ACE" },
-+ { 0x150, 0x0d, "USB2" },
-+ { 0x18c, 0x0e, "DEBUG" },
-+};
-+
- int board_init(void)
- {
- struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
-@@ -247,6 +489,13 @@
- config_serdes_mux();
- #endif
-
-+ ls102xa_config_smmu_stream_id(dev_stream_id,
-+ ARRAY_SIZE(dev_stream_id));
-+
-+#ifdef CONFIG_LS102XA_NS_ACCESS
-+ enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
-+#endif
-+
- #ifdef CONFIG_U_QE
- u_qe_init();
- #endif
-@@ -258,6 +507,10 @@
- {
- ft_cpu_setup(blob, bd);
-
-+#ifdef CONFIG_PCIE_LAYERSCAPE
-+ ft_pcie_setup(blob, bd);
-+#endif
-+
- return 0;
- }
-
-diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_pbi.cfg u-boot/board/freescale/ls1021aqds/ls102xa_pbi.cfg
---- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_pbi.cfg 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/freescale/ls1021aqds/ls102xa_pbi.cfg 2015-01-01 17:34:32.361501481 +0100
-@@ -0,0 +1,12 @@
-+#PBI commands
-+
-+09570200 ffffffff
-+09570158 00000300
-+8940007c 21f47300
-+
-+#Configure Scratch register
-+09ee0200 10000000
-+#Configure alternate space
-+09570158 00001000
-+#Flush PBL data
-+096100c0 000FFFFF
-diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg u-boot/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
---- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg 2015-01-01 17:34:32.361501481 +0100
-@@ -0,0 +1,7 @@
-+#PBL preamble and RCW header
-+aa55aa55 01ee0100
-+# serdes protocol
-+0608000a 00000000 00000000 00000000
-+60000000 00407900 e0106a00 21046000
-+00000000 00000000 00000000 00038000
-+00000000 001b7200 00000000 00000000
-diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg u-boot/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
---- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg 2015-01-01 17:34:32.361501481 +0100
-@@ -0,0 +1,14 @@
-+#PBL preamble and RCW header
-+aa55aa55 01ee0100
-+
-+#enable IFC, disable QSPI and DSPI
-+0608000a 00000000 00000000 00000000
-+60000000 00407900 60040a00 21046000
-+00000000 00000000 00000000 00038000
-+00000000 001b7200 00000000 00000000
-+
-+#disable IFC, enable QSPI and DSPI
-+#0608000a 00000000 00000000 00000000
-+#60000000 00407900 60040a00 21046000
-+#00000000 00000000 00000000 00038000
-+#20024800 001b7200 00000000 00000000
-diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/MAINTAINERS u-boot/board/freescale/ls1021aqds/MAINTAINERS
---- u-boot-2015.01-rc3/board/freescale/ls1021aqds/MAINTAINERS 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/ls1021aqds/MAINTAINERS 2015-01-01 17:34:32.361501481 +0100
-@@ -6,3 +6,6 @@
- F: configs/ls1021aqds_nor_defconfig
- F: configs/ls1021aqds_ddr4_nor_defconfig
- F: configs/ls1021aqds_nor_SECURE_BOOT_defconfig
-+F: configs/ls1021aqds_sdcard_defconfig
-+F: configs/ls1021aqds_qspi_defconfig
-+F: configs/ls1021aqds_nand_defconfig
-diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls1021atwr.c u-boot/board/freescale/ls1021atwr/ls1021atwr.c
---- u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls1021atwr.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/ls1021atwr/ls1021atwr.c 2015-01-01 17:34:32.361501481 +0100
-@@ -8,8 +8,11 @@
- #include <i2c.h>
- #include <asm/io.h>
- #include <asm/arch/immap_ls102xa.h>
-+#include <asm/arch/ns_access.h>
- #include <asm/arch/clock.h>
- #include <asm/arch/fsl_serdes.h>
-+#include <asm/arch/ls102xa_stream_id.h>
-+#include <asm/pcie_layerscape.h>
- #include <mmc.h>
- #include <fsl_esdhc.h>
- #include <fsl_ifc.h>
-@@ -17,6 +20,7 @@
- #include <fsl_mdio.h>
- #include <tsec.h>
- #include <fsl_sec.h>
-+#include <spl.h>
- #ifdef CONFIG_U_QE
- #include "../../../drivers/qe/qe.h"
- #endif
-@@ -70,6 +74,7 @@
- u8 rev2; /* Reserved */
- };
-
-+#ifndef CONFIG_QSPI_BOOT
- static void convert_serdes_mux(int type, int need_reset);
-
- void cpld_show(void)
-@@ -105,11 +110,14 @@
- in_8(&cpld_data->serdes_mux));
- #endif
- }
-+#endif
-
- int checkboard(void)
- {
- puts("Board: LS1021ATWR\n");
-+#ifndef CONFIG_QSPI_BOOT
- cpld_show();
-+#endif
-
- return 0;
- }
-@@ -218,6 +226,7 @@
- }
- #endif
-
-+#ifndef CONFIG_QSPI_BOOT
- int config_serdes_mux(void)
- {
- struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-@@ -249,6 +258,7 @@
-
- return 0;
- }
-+#endif
-
- int board_early_init_f(void)
- {
-@@ -267,9 +277,135 @@
- out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
- #endif
-
-+#ifdef CONFIG_FSL_QSPI
-+ out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
-+#endif
-+
- return 0;
- }
-
-+#ifdef CONFIG_SPL_BUILD
-+void board_init_f(ulong dummy)
-+{
-+ /* Set global data pointer */
-+ gd = &gdata;
-+
-+ /* Clear the BSS */
-+ memset(__bss_start, 0, __bss_end - __bss_start);
-+
-+ get_clocks();
-+
-+ preloader_console_init();
-+
-+ dram_init();
-+
-+ board_init_r(NULL, 0);
-+}
-+#endif
-+
-+#ifdef CONFIG_LS102XA_NS_ACCESS
-+static struct csu_ns_dev ns_dev[] = {
-+ { CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
-+ { CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
-+ { CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
-+ { CSU_CSLX_IFC_MEM, CSU_ALL_RW },
-+ { CSU_CSLX_OCRAM, CSU_ALL_RW },
-+ { CSU_CSLX_GIC, CSU_ALL_RW },
-+ { CSU_CSLX_PCIE1, CSU_ALL_RW },
-+ { CSU_CSLX_OCRAM2, CSU_ALL_RW },
-+ { CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
-+ { CSU_CSLX_PCIE2, CSU_ALL_RW },
-+ { CSU_CSLX_SATA, CSU_ALL_RW },
-+ { CSU_CSLX_USB3, CSU_ALL_RW },
-+ { CSU_CSLX_SERDES, CSU_ALL_RW },
-+ { CSU_CSLX_QDMA, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART2, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART1, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART4, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART3, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART6, CSU_ALL_RW },
-+ { CSU_CSLX_LPUART5, CSU_ALL_RW },
-+ { CSU_CSLX_DSPI2, CSU_ALL_RW },
-+ { CSU_CSLX_DSPI1, CSU_ALL_RW },
-+ { CSU_CSLX_QSPI, CSU_ALL_RW },
-+ { CSU_CSLX_ESDHC, CSU_ALL_RW },
-+ { CSU_CSLX_2D_ACE, CSU_ALL_RW },
-+ { CSU_CSLX_IFC, CSU_ALL_RW },
-+ { CSU_CSLX_I2C1, CSU_ALL_RW },
-+ { CSU_CSLX_USB2, CSU_ALL_RW },
-+ { CSU_CSLX_I2C3, CSU_ALL_RW },
-+ { CSU_CSLX_I2C2, CSU_ALL_RW },
-+ { CSU_CSLX_DUART2, CSU_ALL_RW },
-+ { CSU_CSLX_DUART1, CSU_ALL_RW },
-+ { CSU_CSLX_WDT2, CSU_ALL_RW },
-+ { CSU_CSLX_WDT1, CSU_ALL_RW },
-+ { CSU_CSLX_EDMA, CSU_ALL_RW },
-+ { CSU_CSLX_SYS_CNT, CSU_ALL_RW },
-+ { CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
-+ { CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
-+ { CSU_CSLX_DDR, CSU_ALL_RW },
-+ { CSU_CSLX_QUICC, CSU_ALL_RW },
-+ { CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
-+ { CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
-+ { CSU_CSLX_SFP, CSU_ALL_RW },
-+ { CSU_CSLX_TMU, CSU_ALL_RW },
-+ { CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
-+ { CSU_CSLX_RESERVED0, CSU_ALL_RW },
-+ { CSU_CSLX_ETSEC1, CSU_ALL_RW },
-+ { CSU_CSLX_SEC5_5, CSU_ALL_RW },
-+ { CSU_CSLX_ETSEC3, CSU_ALL_RW },
-+ { CSU_CSLX_ETSEC2, CSU_ALL_RW },
-+ { CSU_CSLX_GPIO2, CSU_ALL_RW },
-+ { CSU_CSLX_GPIO1, CSU_ALL_RW },
-+ { CSU_CSLX_GPIO4, CSU_ALL_RW },
-+ { CSU_CSLX_GPIO3, CSU_ALL_RW },
-+ { CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
-+ { CSU_CSLX_CSU, CSU_ALL_RW },
-+ { CSU_CSLX_ASRC, CSU_ALL_RW },
-+ { CSU_CSLX_SPDIF, CSU_ALL_RW },
-+ { CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
-+ { CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
-+ { CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
-+ { CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
-+ { CSU_CSLX_SAI2, CSU_ALL_RW },
-+ { CSU_CSLX_SAI1, CSU_ALL_RW },
-+ { CSU_CSLX_SAI4, CSU_ALL_RW },
-+ { CSU_CSLX_SAI3, CSU_ALL_RW },
-+ { CSU_CSLX_FTM2, CSU_ALL_RW },
-+ { CSU_CSLX_FTM1, CSU_ALL_RW },
-+ { CSU_CSLX_FTM4, CSU_ALL_RW },
-+ { CSU_CSLX_FTM3, CSU_ALL_RW },
-+ { CSU_CSLX_FTM6, CSU_ALL_RW },
-+ { CSU_CSLX_FTM5, CSU_ALL_RW },
-+ { CSU_CSLX_FTM8, CSU_ALL_RW },
-+ { CSU_CSLX_FTM7, CSU_ALL_RW },
-+ { CSU_CSLX_COP_DCSR, CSU_ALL_RW },
-+ { CSU_CSLX_EPU, CSU_ALL_RW },
-+ { CSU_CSLX_GDI, CSU_ALL_RW },
-+ { CSU_CSLX_DDI, CSU_ALL_RW },
-+ { CSU_CSLX_RESERVED1, CSU_ALL_RW },
-+ { CSU_CSLX_USB3_PHY, CSU_ALL_RW },
-+ { CSU_CSLX_RESERVED2, CSU_ALL_RW },
-+};
-+#endif
-+
-+struct smmu_stream_id dev_stream_id[] = {
-+ { 0x100, 0x01, "ETSEC MAC1" },
-+ { 0x104, 0x02, "ETSEC MAC2" },
-+ { 0x108, 0x03, "ETSEC MAC3" },
-+ { 0x10c, 0x04, "PEX1" },
-+ { 0x110, 0x05, "PEX2" },
-+ { 0x114, 0x06, "qDMA" },
-+ { 0x118, 0x07, "SATA" },
-+ { 0x11c, 0x08, "USB3" },
-+ { 0x120, 0x09, "QE" },
-+ { 0x124, 0x0a, "eSDHC" },
-+ { 0x128, 0x0b, "eMA" },
-+ { 0x14c, 0x0c, "2D-ACE" },
-+ { 0x150, 0x0d, "USB2" },
-+ { 0x18c, 0x0e, "DEBUG" },
-+};
-+
- int board_init(void)
- {
- struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
-@@ -284,8 +420,17 @@
-
- #ifndef CONFIG_SYS_FSL_NO_SERDES
- fsl_serdes_init();
-+#ifndef CONFIG_QSPI_BOOT
- config_serdes_mux();
- #endif
-+#endif
-+
-+ ls102xa_config_smmu_stream_id(dev_stream_id,
-+ ARRAY_SIZE(dev_stream_id));
-+
-+#ifdef CONFIG_LS102XA_NS_ACCESS
-+ enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
-+#endif
-
- #ifdef CONFIG_U_QE
- u_qe_init();
-@@ -307,6 +452,10 @@
- {
- ft_cpu_setup(blob, bd);
-
-+#ifdef CONFIG_PCIE_LAYERSCAPE
-+ ft_pcie_setup(blob, bd);
-+#endif
-+
- return 0;
- }
-
-@@ -329,6 +478,7 @@
- return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
- }
-
-+#ifndef CONFIG_QSPI_BOOT
- static void convert_flash_bank(char bank)
- {
- struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-@@ -511,3 +661,4 @@
- " -change lane C & lane D to PCIeX2\n"
- "\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n"
- );
-+#endif
-diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_pbi.cfg u-boot/board/freescale/ls1021atwr/ls102xa_pbi.cfg
---- u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_pbi.cfg 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/freescale/ls1021atwr/ls102xa_pbi.cfg 2015-01-01 17:34:32.361501481 +0100
-@@ -0,0 +1,12 @@
-+#PBI commands
-+
-+09570200 ffffffff
-+09570158 00000300
-+8940007c 21f47300
-+
-+#Configure Scratch register
-+09ee0200 10000000
-+#Configure alternate space
-+09570158 00001000
-+#Flush PBL data
-+096100c0 000FFFFF
-diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg u-boot/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
---- u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg 2015-01-01 17:34:32.361501481 +0100
-@@ -0,0 +1,14 @@
-+#PBL preamble and RCW header
-+aa55aa55 01ee0100
-+
-+#enable IFC, disable QSPI and DSPI
-+0608000a 00000000 00000000 00000000
-+20000000 00407900 60040a00 21046000
-+00000000 00000000 00000000 00038000
-+00080000 881b7340 00000000 00000000
-+
-+#disable IFC, enable QSPI and DSPI
-+#0608000a 00000000 00000000 00000000
-+#20000000 00407900 60040a00 21046000
-+#00000000 00000000 00000000 00038000
-+#20084800 881b7340 00000000 00000000
-diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/MAINTAINERS u-boot/board/freescale/ls1021atwr/MAINTAINERS
---- u-boot-2015.01-rc3/board/freescale/ls1021atwr/MAINTAINERS 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/ls1021atwr/MAINTAINERS 2015-01-01 17:34:32.361501481 +0100
-@@ -5,3 +5,5 @@
- F: include/configs/ls1021atwr.h
- F: configs/ls1021atwr_nor_defconfig
- F: configs/ls1021atwr_nor_SECURE_BOOT_defconfig
-+F: configs/ls1021atwr_sdcard_defconfig
-+F: configs/ls1021atwr_qspi_defconfig
-diff -ruN u-boot-2015.01-rc3/board/freescale/mx6slevk/mx6slevk.c u-boot/board/freescale/mx6slevk/mx6slevk.c
---- u-boot-2015.01-rc3/board/freescale/mx6slevk/mx6slevk.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/mx6slevk/mx6slevk.c 2015-01-01 17:34:32.381501153 +0100
-@@ -20,6 +20,8 @@
- #include <fsl_esdhc.h>
- #include <mmc.h>
- #include <netdev.h>
-+#include <usb.h>
-+#include <usb/ehci-fsl.h>
-
- DECLARE_GLOBAL_DATA_PTR;
-
-@@ -234,10 +236,52 @@
- /* clear gpr1[14], gpr1[18:17] to select anatop clock */
- clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
-
-- return enable_fec_anatop_clock(ENET_50MHz);
-+ return enable_fec_anatop_clock(ENET_50MHZ);
- }
- #endif
-
-+#ifdef CONFIG_USB_EHCI_MX6
-+#define USB_OTHERREGS_OFFSET 0x800
-+#define UCTRL_PWR_POL (1 << 9)
-+
-+static iomux_v3_cfg_t const usb_otg_pads[] = {
-+ /* OTG1 */
-+ MX6_PAD_KEY_COL4__USB_USBOTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-+ MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
-+ /* OTG2 */
-+ MX6_PAD_KEY_COL5__USB_USBOTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
-+};
-+
-+static void setup_usb(void)
-+{
-+ imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
-+ ARRAY_SIZE(usb_otg_pads));
-+}
-+
-+int board_usb_phy_mode(int port)
-+{
-+ if (port == 1)
-+ return USB_INIT_HOST;
-+ else
-+ return usb_phy_mode(port);
-+}
-+
-+int board_ehci_hcd_init(int port)
-+{
-+ u32 *usbnc_usb_ctrl;
-+
-+ if (port > 1)
-+ return -EINVAL;
-+
-+ usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
-+ port * 4);
-+
-+ /* Set Power polarity */
-+ setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
-+
-+ return 0;
-+}
-+#endif
-
- int board_early_init_f(void)
- {
-@@ -256,6 +300,11 @@
- #ifdef CONFIG_FEC_MXC
- setup_fec();
- #endif
-+
-+#ifdef CONFIG_USB_EHCI_MX6
-+ setup_usb();
-+#endif
-+
- return 0;
- }
-
-diff -ruN u-boot-2015.01-rc3/board/freescale/mx6sxsabresd/mx6sxsabresd.c u-boot/board/freescale/mx6sxsabresd/mx6sxsabresd.c
---- u-boot-2015.01-rc3/board/freescale/mx6sxsabresd/mx6sxsabresd.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/mx6sxsabresd/mx6sxsabresd.c 2015-01-01 17:34:32.381501153 +0100
-@@ -26,6 +26,8 @@
- #include <power/pmic.h>
- #include <power/pfuze100_pmic.h>
- #include "../common/pfuze.h"
-+#include <usb.h>
-+#include <usb/ehci-fsl.h>
-
- DECLARE_GLOBAL_DATA_PTR;
-
-@@ -168,7 +170,7 @@
- reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE;
- writel(reg, &anatop->pll_enet);
-
-- return enable_fec_anatop_clock(ENET_125MHz);
-+ return enable_fec_anatop_clock(ENET_125MHZ);
- }
-
- int board_eth_init(bd_t *bis)
-@@ -212,6 +214,49 @@
- return 0;
- }
-
-+#ifdef CONFIG_USB_EHCI_MX6
-+#define USB_OTHERREGS_OFFSET 0x800
-+#define UCTRL_PWR_POL (1 << 9)
-+
-+static iomux_v3_cfg_t const usb_otg_pads[] = {
-+ /* OGT1 */
-+ MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-+ MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
-+ /* OTG2 */
-+ MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
-+};
-+
-+static void setup_usb(void)
-+{
-+ imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
-+ ARRAY_SIZE(usb_otg_pads));
-+}
-+
-+int board_usb_phy_mode(int port)
-+{
-+ if (port == 1)
-+ return USB_INIT_HOST;
-+ else
-+ return usb_phy_mode(port);
-+}
-+
-+int board_ehci_hcd_init(int port)
-+{
-+ u32 *usbnc_usb_ctrl;
-+
-+ if (port > 1)
-+ return -EINVAL;
-+
-+ usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
-+ port * 4);
-+
-+ /* Set Power polarity */
-+ setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
-+
-+ return 0;
-+}
-+#endif
-+
- int board_phy_config(struct phy_device *phydev)
- {
- /*
-@@ -242,6 +287,10 @@
- /* Active high for ncp692 */
- gpio_direction_output(IMX_GPIO_NR(4, 16) , 1);
-
-+#ifdef CONFIG_USB_EHCI_MX6
-+ setup_usb();
-+#endif
-+
- return 0;
- }
-
-@@ -322,7 +371,6 @@
- return 0;
- }
-
--
- int board_init(void)
- {
- /* Address of boot parameters */
-diff -ruN u-boot-2015.01-rc3/board/freescale/t104xrdb/ddr.c u-boot/board/freescale/t104xrdb/ddr.c
---- u-boot-2015.01-rc3/board/freescale/t104xrdb/ddr.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/t104xrdb/ddr.c 2015-01-01 17:34:32.389501022 +0100
-@@ -11,6 +11,7 @@
- #include <fsl_ddr_sdram.h>
- #include <fsl_ddr_dimm_params.h>
- #include <asm/fsl_law.h>
-+#include <asm/mpc85xx_gpio.h>
- #include "ddr.h"
-
- DECLARE_GLOBAL_DATA_PTR;
-@@ -109,6 +110,19 @@
- popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
- }
-
-+#if defined(CONFIG_DEEP_SLEEP)
-+void board_mem_sleep_setup(void)
-+{
-+ void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE;
-+
-+ /* does not provide HW signals for power management */
-+ clrbits_8(cpld_base + 0x17, 0x40);
-+ /* Disable MCKE isolation */
-+ gpio_set_value(2, 0);
-+ udelay(1);
-+}
-+#endif
-+
- phys_size_t initdram(int board_type)
- {
- phys_size_t dram_size;
-@@ -124,5 +138,10 @@
- #else
- dram_size = fsl_ddr_sdram_size();
- #endif
-+
-+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
-+ fsl_dp_resume();
-+#endif
-+
- return dram_size;
- }
-diff -ruN u-boot-2015.01-rc3/board/freescale/t104xrdb/spl.c u-boot/board/freescale/t104xrdb/spl.c
---- u-boot-2015.01-rc3/board/freescale/t104xrdb/spl.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/t104xrdb/spl.c 2015-01-01 17:34:32.389501022 +0100
-@@ -11,7 +11,7 @@
- #include <mmc.h>
- #include <fsl_esdhc.h>
- #include <spi_flash.h>
--#include <asm/mpc85xx_gpio.h>
-+#include "../common/sleep.h"
-
- DECLARE_GLOBAL_DATA_PTR;
-
-@@ -64,8 +64,8 @@
-
- #ifdef CONFIG_DEEP_SLEEP
- /* disable the console if boot from deep sleep */
-- if (in_be32(&gur->scrtsr[0]) & (1 << 3))
-- gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
-+ if (is_warm_boot())
-+ fsl_dp_disable_console();
- #endif
- /* compiler optimization barrier needed for GCC >= 3.4 */
- __asm__ __volatile__("" : : : "memory");
-@@ -132,16 +132,3 @@
- nand_boot();
- #endif
- }
--
--#ifdef CONFIG_DEEP_SLEEP
--void board_mem_sleep_setup(void)
--{
-- void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE;
--
-- /* does not provide HW signals for power management */
-- clrbits_8(cpld_base + 0x17, 0x40);
-- /* Disable MCKE isolation */
-- gpio_set_value(2, 0);
-- udelay(1);
--}
--#endif
-diff -ruN u-boot-2015.01-rc3/board/freescale/t104xrdb/t104xrdb.c u-boot/board/freescale/t104xrdb/t104xrdb.c
---- u-boot-2015.01-rc3/board/freescale/t104xrdb/t104xrdb.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/freescale/t104xrdb/t104xrdb.c 2015-01-01 17:34:32.389501022 +0100
-@@ -17,8 +17,7 @@
- #include <asm/fsl_portals.h>
- #include <asm/fsl_liodn.h>
- #include <fm_eth.h>
--#include <asm/mpc85xx_gpio.h>
--
-+#include "../common/sleep.h"
- #include "t104xrdb.h"
- #include "cpld.h"
-
-@@ -44,6 +43,16 @@
- return 0;
- }
-
-+int board_early_init_f(void)
-+{
-+#if defined(CONFIG_DEEP_SLEEP)
-+ if (is_warm_boot())
-+ fsl_dp_disable_console();
-+#endif
-+
-+ return 0;
-+}
-+
- int board_early_init_r(void)
- {
- #ifdef CONFIG_SYS_FLASH_BASE
-@@ -113,14 +122,3 @@
-
- return 0;
- }
--
--#ifdef CONFIG_DEEP_SLEEP
--void board_mem_sleep_setup(void)
--{
-- /* does not provide HW signals for power management */
-- CPLD_WRITE(misc_ctl_status, (CPLD_READ(misc_ctl_status) & ~0x40));
-- /* Disable MCKE isolation */
-- gpio_set_value(2, 0);
-- udelay(1);
--}
--#endif
-diff -ruN u-boot-2015.01-rc3/board/google/chromebook_link/Kconfig u-boot/board/google/chromebook_link/Kconfig
---- u-boot-2015.01-rc3/board/google/chromebook_link/Kconfig 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/google/chromebook_link/Kconfig 2015-01-01 17:34:32.401500826 +0100
-@@ -19,6 +19,7 @@
- select SOUTHBRIDGE_INTEL_C216
- select HAVE_ACPI_RESUME
- select MARK_GRAPHICS_MEM_WRCOMB
-+ select BOARD_ROMSIZE_KB_8192
-
- config MMCONF_BASE_ADDRESS
- hex
-diff -ruN u-boot-2015.01-rc3/board/google/chromebook_link/link.c u-boot/board/google/chromebook_link/link.c
---- u-boot-2015.01-rc3/board/google/chromebook_link/link.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/google/chromebook_link/link.c 2015-01-01 17:34:32.401500826 +0100
-@@ -7,6 +7,9 @@
- #include <common.h>
- #include <cros_ec.h>
- #include <asm/gpio.h>
-+#include <asm/io.h>
-+#include <asm/pci.h>
-+#include <asm/arch/pch.h>
-
- int arch_early_init_r(void)
- {
-@@ -121,3 +124,40 @@
-
- return 0;
- }
-+
-+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
-+{
-+ /* GPIO Set 1 */
-+ if (gpio->set1.level)
-+ outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
-+ if (gpio->set1.mode)
-+ outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
-+ if (gpio->set1.direction)
-+ outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL);
-+ if (gpio->set1.reset)
-+ outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1);
-+ if (gpio->set1.invert)
-+ outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV);
-+ if (gpio->set1.blink)
-+ outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK);
-+
-+ /* GPIO Set 2 */
-+ if (gpio->set2.level)
-+ outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
-+ if (gpio->set2.mode)
-+ outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
-+ if (gpio->set2.direction)
-+ outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2);
-+ if (gpio->set2.reset)
-+ outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2);
-+
-+ /* GPIO Set 3 */
-+ if (gpio->set3.level)
-+ outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
-+ if (gpio->set3.mode)
-+ outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
-+ if (gpio->set3.direction)
-+ outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3);
-+ if (gpio->set3.reset)
-+ outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3);
-+}
-diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/crownbay.c u-boot/board/intel/crownbay/crownbay.c
---- u-boot-2015.01-rc3/board/intel/crownbay/crownbay.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/intel/crownbay/crownbay.c 2015-01-01 17:34:32.405500760 +0100
-@@ -0,0 +1,32 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/ibmpc.h>
-+#include <asm/pnp_def.h>
-+#include <netdev.h>
-+#include <smsc_lpc47m.h>
-+
-+#define SERIAL_DEV PNP_DEV(0x2e, 4)
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+int board_early_init_f(void)
-+{
-+ lpc47m_enable_serial(SERIAL_DEV, UART0_BASE);
-+
-+ return 0;
-+}
-+
-+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
-+{
-+ return;
-+}
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ return pci_eth_init(bis);
-+}
-diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/Kconfig u-boot/board/intel/crownbay/Kconfig
---- u-boot-2015.01-rc3/board/intel/crownbay/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/intel/crownbay/Kconfig 2015-01-01 17:34:32.405500760 +0100
-@@ -0,0 +1,20 @@
-+if TARGET_CROWNBAY
-+
-+config SYS_BOARD
-+ default "crownbay"
-+
-+config SYS_VENDOR
-+ default "intel"
-+
-+config SYS_SOC
-+ default "queensbay"
-+
-+config SYS_CONFIG_NAME
-+ default "crownbay"
-+
-+config BOARD_SPECIFIC_OPTIONS # dummy
-+ def_bool y
-+ select INTEL_QUEENSBAY
-+ select BOARD_ROMSIZE_KB_1024
-+
-+endif
-diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/MAINTAINERS u-boot/board/intel/crownbay/MAINTAINERS
---- u-boot-2015.01-rc3/board/intel/crownbay/MAINTAINERS 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/intel/crownbay/MAINTAINERS 2015-01-01 17:34:32.405500760 +0100
-@@ -0,0 +1,6 @@
-+INTEL CROWNBAY BOARD
-+M: Bin Meng <bmeng.cn@gmail.com>
-+S: Maintained
-+F: board/intel/crownbay/
-+F: include/configs/crownbay.h
-+F: configs/crownbay_defconfig
-diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/Makefile u-boot/board/intel/crownbay/Makefile
---- u-boot-2015.01-rc3/board/intel/crownbay/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/intel/crownbay/Makefile 2015-01-01 17:34:32.405500760 +0100
-@@ -0,0 +1,7 @@
-+#
-+# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+obj-y += crownbay.o start.o
-diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/start.S u-boot/board/intel/crownbay/start.S
---- u-boot-2015.01-rc3/board/intel/crownbay/start.S 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/intel/crownbay/start.S 2015-01-01 17:34:32.405500760 +0100
-@@ -0,0 +1,9 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+.globl early_board_init
-+early_board_init:
-+ jmp early_board_init_ret
-diff -ruN u-boot-2015.01-rc3/board/nvidia/cardhu/cardhu.c u-boot/board/nvidia/cardhu/cardhu.c
---- u-boot-2015.01-rc3/board/nvidia/cardhu/cardhu.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/nvidia/cardhu/cardhu.c 2015-01-01 17:34:32.449500039 +0100
-@@ -6,6 +6,7 @@
- */
-
- #include <common.h>
-+#include <dm.h>
- #include <asm/arch/pinmux.h>
- #include <asm/arch/gp_padctrl.h>
- #include "pinmux-config-cardhu.h"
-@@ -37,17 +38,23 @@
- */
- void board_sdmmc_voltage_init(void)
- {
-+ struct udevice *dev;
- uchar reg, data_buffer[1];
-+ int ret;
- int i;
-
-- i2c_set_bus_num(0); /* PMU is on bus 0 */
-+ ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
-+ if (ret) {
-+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
-+ return;
-+ }
-
- /* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */
- data_buffer[0] = 0x65;
- reg = 0x32;
-
- for (i = 0; i < MAX_I2C_RETRY; ++i) {
-- if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
-+ if (i2c_write(dev, reg, data_buffer, 1))
- udelay(100);
- }
-
-@@ -56,7 +63,7 @@
- reg = 0x67;
-
- for (i = 0; i < MAX_I2C_RETRY; ++i) {
-- if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
-+ if (i2c_write(dev, reg, data_buffer, 1))
- udelay(100);
- }
- }
-diff -ruN u-boot-2015.01-rc3/board/nvidia/common/board.c u-boot/board/nvidia/common/board.c
---- u-boot-2015.01-rc3/board/nvidia/common/board.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/nvidia/common/board.c 2015-01-01 17:34:32.453499973 +0100
-@@ -113,10 +113,6 @@
- power_det_init();
-
- #ifdef CONFIG_SYS_I2C_TEGRA
--#ifndef CONFIG_SYS_I2C_INIT_BOARD
--#error "You must define CONFIG_SYS_I2C_INIT_BOARD to use i2c on Nvidia boards"
--#endif
-- i2c_init_board();
- # ifdef CONFIG_TEGRA_PMU
- if (pmu_set_nominal())
- debug("Failed to select nominal voltages\n");
-diff -ruN u-boot-2015.01-rc3/board/nvidia/dalmore/dalmore.c u-boot/board/nvidia/dalmore/dalmore.c
---- u-boot-2015.01-rc3/board/nvidia/dalmore/dalmore.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/nvidia/dalmore/dalmore.c 2015-01-01 17:34:32.453499973 +0100
-@@ -15,6 +15,7 @@
- */
-
- #include <common.h>
-+#include <dm.h>
- #include <asm/arch/pinmux.h>
- #include <asm/arch/gp_padctrl.h>
- #include "pinmux-config-dalmore.h"
-@@ -50,18 +51,21 @@
- */
- void board_sdmmc_voltage_init(void)
- {
-+ struct udevice *dev;
- uchar reg, data_buffer[1];
- int ret;
-
-- ret = i2c_set_bus_num(0);/* PMU is on bus 0 */
-- if (ret)
-- printf("%s: i2c_set_bus_num returned %d\n", __func__, ret);
-+ ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
-+ if (ret) {
-+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
-+ return;
-+ }
-
- /* TPS65913: LDO9_VOLTAGE = 3.3V */
- data_buffer[0] = 0x31;
- reg = 0x61;
-
-- ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
-+ ret = i2c_write(dev, reg, data_buffer, 1);
- if (ret)
- printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
- __func__, reg, data_buffer[0], ret);
-@@ -70,7 +74,7 @@
- data_buffer[0] = 0x01;
- reg = 0x60;
-
-- ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
-+ ret = i2c_write(dev, reg, data_buffer, 1);
- if (ret)
- printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
- __func__, reg, data_buffer[0], ret);
-@@ -79,7 +83,12 @@
- data_buffer[0] = 0x03;
- reg = 0x14;
-
-- ret = i2c_write(BAT_I2C_ADDRESS, reg, 1, data_buffer, 1);
-+ ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, &dev);
-+ if (ret) {
-+ debug("%s: Cannot find charger I2C chip\n", __func__);
-+ return;
-+ }
-+ ret = i2c_write(dev, reg, data_buffer, 1);
- if (ret)
- printf("%s: BAT i2c_write %02X<-%02X returned %d\n",
- __func__, reg, data_buffer[0], ret);
-diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/Kconfig u-boot/board/nvidia/nyan-big/Kconfig
---- u-boot-2015.01-rc3/board/nvidia/nyan-big/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/nvidia/nyan-big/Kconfig 2015-01-01 17:34:32.453499973 +0100
-@@ -0,0 +1,24 @@
-+if TARGET_NYAN_BIG
-+
-+config SYS_CPU
-+ string
-+ default "arm720t" if SPL_BUILD
-+ default "armv7" if !SPL_BUILD
-+
-+config SYS_BOARD
-+ string
-+ default "nyan-big"
-+
-+config SYS_VENDOR
-+ string
-+ default "nvidia"
-+
-+config SYS_SOC
-+ string
-+ default "tegra124"
-+
-+config SYS_CONFIG_NAME
-+ string
-+ default "nyan-big"
-+
-+endif
-diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/MAINTAINERS u-boot/board/nvidia/nyan-big/MAINTAINERS
---- u-boot-2015.01-rc3/board/nvidia/nyan-big/MAINTAINERS 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/nvidia/nyan-big/MAINTAINERS 2015-01-01 17:34:32.453499973 +0100
-@@ -0,0 +1,6 @@
-+NORRIN BOARD
-+M: Allen Martin <amartin@nvidia.com>
-+S: Maintained
-+F: board/nvidia/nyan-big/
-+F: include/configs/nyan-big.h
-+F: configs/nyan-big_defconfig
-diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/Makefile u-boot/board/nvidia/nyan-big/Makefile
---- u-boot-2015.01-rc3/board/nvidia/nyan-big/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/nvidia/nyan-big/Makefile 2015-01-01 17:34:32.453499973 +0100
-@@ -0,0 +1,9 @@
-+#
-+# (C) Copyright 2014
-+# NVIDIA Corporation <www.nvidia.com>
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+obj-y += ../venice2/as3722_init.o
-+obj-y += nyan-big.o
-diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/nyan-big.c u-boot/board/nvidia/nyan-big/nyan-big.c
---- u-boot-2015.01-rc3/board/nvidia/nyan-big/nyan-big.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/nvidia/nyan-big/nyan-big.c 2015-01-01 17:34:32.453499973 +0100
-@@ -0,0 +1,27 @@
-+/*
-+ * (C) Copyright 2014
-+ * NVIDIA Corporation <www.nvidia.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/pinmux.h>
-+#include "pinmux-config-nyan-big.h"
-+
-+/*
-+ * Routine: pinmux_init
-+ * Description: Do individual peripheral pinmux configs
-+ */
-+void pinmux_init(void)
-+{
-+ gpio_config_table(nyan_big_gpio_inits,
-+ ARRAY_SIZE(nyan_big_gpio_inits));
-+
-+ pinmux_config_pingrp_table(nyan_big_pingrps,
-+ ARRAY_SIZE(nyan_big_pingrps));
-+
-+ pinmux_config_drvgrp_table(nyan_big_drvgrps,
-+ ARRAY_SIZE(nyan_big_drvgrps));
-+}
-diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/pinmux-config-nyan-big.h u-boot/board/nvidia/nyan-big/pinmux-config-nyan-big.h
---- u-boot-2015.01-rc3/board/nvidia/nyan-big/pinmux-config-nyan-big.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/nvidia/nyan-big/pinmux-config-nyan-big.h 2015-01-01 17:34:32.453499973 +0100
-@@ -0,0 +1,287 @@
-+/*
-+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _PINMUX_CONFIG_NYAN_BIG_H_
-+#define _PINMUX_CONFIG_NYAN_BIG_H_
-+
-+#define GPIO_INIT(_gpio, _init) \
-+ { \
-+ .gpio = GPIO_P##_gpio, \
-+ .init = TEGRA_GPIO_INIT_##_init, \
-+ }
-+
-+static const struct tegra_gpio_config nyan_big_gpio_inits[] = {
-+ /* gpio, init_val */
-+ GPIO_INIT(A0, IN),
-+ GPIO_INIT(C7, IN),
-+ GPIO_INIT(G0, IN),
-+ GPIO_INIT(G1, IN),
-+ GPIO_INIT(G2, IN),
-+ GPIO_INIT(G3, IN),
-+ GPIO_INIT(H2, IN),
-+ GPIO_INIT(H4, IN),
-+ GPIO_INIT(H6, IN),
-+ GPIO_INIT(H7, OUT1),
-+ GPIO_INIT(I0, IN),
-+ GPIO_INIT(I1, IN),
-+ GPIO_INIT(I5, OUT1),
-+ GPIO_INIT(I6, IN),
-+ GPIO_INIT(I7, IN),
-+ GPIO_INIT(J0, IN),
-+ GPIO_INIT(J7, IN),
-+ GPIO_INIT(K1, OUT0),
-+ GPIO_INIT(K2, IN),
-+ GPIO_INIT(K4, OUT0),
-+ GPIO_INIT(K6, OUT0),
-+ GPIO_INIT(K7, IN),
-+ GPIO_INIT(N7, IN),
-+ GPIO_INIT(P2, OUT0),
-+ GPIO_INIT(Q0, IN),
-+ GPIO_INIT(Q2, IN),
-+ GPIO_INIT(Q3, IN),
-+ GPIO_INIT(Q6, IN),
-+ GPIO_INIT(Q7, IN),
-+ GPIO_INIT(R0, OUT0),
-+ GPIO_INIT(R1, IN),
-+ GPIO_INIT(R4, IN),
-+ GPIO_INIT(R7, IN),
-+ GPIO_INIT(S3, OUT0),
-+ GPIO_INIT(S4, OUT0),
-+ GPIO_INIT(S7, IN),
-+ GPIO_INIT(T1, IN),
-+ GPIO_INIT(U4, IN),
-+ GPIO_INIT(U5, IN),
-+ GPIO_INIT(U6, IN),
-+ GPIO_INIT(V0, IN),
-+ GPIO_INIT(W3, IN),
-+ GPIO_INIT(X1, IN),
-+ GPIO_INIT(X4, IN),
-+ GPIO_INIT(X7, OUT0),
-+};
-+
-+#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _rcv_sel) \
-+ { \
-+ .pingrp = PMUX_PINGRP_##_pingrp, \
-+ .func = PMUX_FUNC_##_mux, \
-+ .pull = PMUX_PULL_##_pull, \
-+ .tristate = PMUX_TRI_##_tri, \
-+ .io = PMUX_PIN_##_io, \
-+ .od = PMUX_PIN_OD_##_od, \
-+ .rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \
-+ .lock = PMUX_PIN_LOCK_DEFAULT, \
-+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
-+ }
-+
-+static const struct pmux_pingrp_config nyan_big_pingrps[] = {
-+ /* pingrp, mux, pull, tri, e_input, od, rcv_sel */
-+ PINCFG(CLK_32K_OUT_PA0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(UART3_CTS_N_PA1, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP2_DIN_PA4, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PB0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PB1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(UART3_RTS_N_PC0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(UART2_TXD_PC2, IRDA, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(UART2_RXD_PC3, IRDA, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
-+ PINCFG(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
-+ PINCFG(PC7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PG0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PG1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PG2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PG3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PG4, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PG5, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PG6, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PG7, SPI4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PH0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PH1, PWM1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PH2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PH3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PH4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PH5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PH6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PI0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PI1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PI2, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PI3, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PI4, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PI5, DEFAULT, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PI6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PI7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PJ0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PJ2, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(UART2_CTS_N_PJ5, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(UART2_RTS_N_PJ6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PJ7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PK0, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PK1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PK2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PK3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PK4, DEFAULT, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(SPDIF_OUT_PK5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(SPDIF_IN_PK6, DEFAULT, DOWN, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PK7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP1_FS_PN0, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP1_DIN_PN1, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP1_DOUT_PN2, I2S0, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP1_SCLK_PN3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(USB_VBUS_EN0_PN4, USB, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
-+ PINCFG(USB_VBUS_EN1_PN5, USB, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
-+ PINCFG(HDMI_INT_PN7, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, NORMAL),
-+ PINCFG(ULPI_DATA7_PO0, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_DATA0_PO1, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_DATA1_PO2, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_DATA2_PO3, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_DATA3_PO4, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_DATA4_PO5, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_DATA5_PO6, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_DATA6_PO7, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP3_FS_PP0, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP3_DIN_PP1, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP3_DOUT_PP2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP3_SCLK_PP3, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP4_FS_PP4, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP4_DIN_PP5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP4_DOUT_PP6, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP4_SCLK_PP7, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_COL0_PQ0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_COL1_PQ1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_COL2_PQ2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_COL3_PQ3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_COL4_PQ4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_COL5_PQ5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_COL6_PQ6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_COL7_PQ7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW0_PR0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW1_PR1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW2_PR2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW3_PR3, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW4_PR4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW5_PR5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW6_PR6, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW7_PR7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW8_PS0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW9_PS1, UARTA, DOWN, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW10_PS2, UARTA, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW11_PS3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW12_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW13_PS5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW14_PS6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW15_PS7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW16_PT0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(KB_ROW17_PT1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
-+ PINCFG(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
-+ PINCFG(SDMMC4_CMD_PT7, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PU0, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PU1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PU2, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PU3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PU4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PU5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PU6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PV0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PV1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC3_CD_N_PV2, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC1_WP_N_PV3, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
-+ PINCFG(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
-+ PINCFG(GPIO_W2_AUD_PW2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(GPIO_W3_AUD_PW3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP_MCLK1_PW4, EXTPERIPH1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(CLK2_OUT_PW5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(UART3_TXD_PW6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(UART3_RXD_PW7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DVFS_PWM_PX0, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(GPIO_X1_AUD_PX1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(DVFS_CLK_PX2, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(GPIO_X3_AUD_PX3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(GPIO_X4_AUD_PX4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(GPIO_X5_AUD_PX5, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(GPIO_X6_AUD_PX6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(GPIO_X7_AUD_PX7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_CLK_PY0, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_DIR_PY1, SPI1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_NXT_PY2, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(ULPI_STP_PY3, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
-+ PINCFG(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
-+ PINCFG(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(PBB0, VGP6, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(CAM_I2C_SCL_PBB1, RSVD3, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
-+ PINCFG(CAM_I2C_SDA_PBB2, RSVD3, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
-+ PINCFG(PBB3, VGP3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PBB4, VGP4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PBB5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PBB6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PBB7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(CAM_MCLK_PCC0, VI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PCC1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PCC2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(CLK2_REQ_PCC5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PEX_L0_RST_N_PDD1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PEX_L0_CLKREQ_N_PDD2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PEX_WAKE_N_PDD3, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PEX_L1_RST_N_PDD5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PEX_L1_CLKREQ_N_PDD6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(CLK3_OUT_PEE0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(CLK3_REQ_PEE1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(DAP_MCLK1_REQ_PEE2, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
-+ PINCFG(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(SDMMC3_CLK_LB_IN_PEE5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(DP_HPD_PFF0, DP, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(USB_VBUS_EN2_PFF1, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
-+ PINCFG(PFF2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
-+ PINCFG(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(PWR_INT_N, PMI, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+ PINCFG(OWR, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, NORMAL),
-+ PINCFG(CLK_32K_IN, CLK, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
-+ PINCFG(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
-+};
-+
-+#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
-+ { \
-+ .drvgrp = PMUX_DRVGRP_##_drvgrp, \
-+ .slwf = _slwf, \
-+ .slwr = _slwr, \
-+ .drvup = _drvup, \
-+ .drvdn = _drvdn, \
-+ .lpmd = PMUX_LPMD_##_lpmd, \
-+ .schmt = PMUX_SCHMT_##_schmt, \
-+ .hsm = PMUX_HSM_##_hsm, \
-+ }
-+
-+static const struct pmux_drvgrp_config nyan_big_drvgrps[] = {
-+};
-+
-+#endif /* PINMUX_CONFIG_NYAN_BIG_H */
-diff -ruN u-boot-2015.01-rc3/board/nvidia/venice2/as3722_init.h u-boot/board/nvidia/venice2/as3722_init.h
---- u-boot-2015.01-rc3/board/nvidia/venice2/as3722_init.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/nvidia/venice2/as3722_init.h 2015-01-01 17:34:32.453499973 +0100
-@@ -18,7 +18,7 @@
- #define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */
- #define AS3722_LDCONTROL_REG 0x4E
-
--#ifdef CONFIG_TARGET_JETSON_TK1
-+#if defined(CONFIG_TARGET_JETSON_TK1) || defined(CONFIG_TARGET_NYAN_BIG)
- #define AS3722_SD0VOLTAGE_DATA (0x3C00 | AS3722_SD0VOLTAGE_REG)
- #else
- #define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG)
-diff -ruN u-boot-2015.01-rc3/board/nvidia/whistler/whistler.c u-boot/board/nvidia/whistler/whistler.c
---- u-boot-2015.01-rc3/board/nvidia/whistler/whistler.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/nvidia/whistler/whistler.c 2015-01-01 17:34:32.453499973 +0100
-@@ -6,6 +6,7 @@
- */
-
- #include <common.h>
-+#include <dm.h>
- #include <asm/io.h>
- #include <asm/arch/tegra.h>
- #include <asm/arch/clock.h>
-@@ -21,23 +22,26 @@
- */
- void pin_mux_mmc(void)
- {
-+ struct udevice *dev;
- uchar val;
- int ret;
-
- /* Turn on MAX8907B LDO12 to 2.8V for J40 power */
-- ret = i2c_set_bus_num(0);
-- if (ret)
-- printf("i2c_set_bus_num failed: %d\n", ret);
-+ ret = i2c_get_chip_for_busnum(0, 0x3c, &dev);
-+ if (ret) {
-+ printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
-+ return;
-+ }
- val = 0x29;
-- ret = i2c_write(0x3c, 0x46, 1, &val, 1);
-+ ret = i2c_write(dev, 0x46, &val, 1);
- if (ret)
- printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
- val = 0x00;
-- ret = i2c_write(0x3c, 0x45, 1, &val, 1);
-+ ret = i2c_write(dev, 0x45, &val, 1);
- if (ret)
- printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
- val = 0x1f;
-- ret = i2c_write(0x3c, 0x44, 1, &val, 1);
-+ ret = i2c_write(dev, 0x44, &val, 1);
- if (ret)
- printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
-
-@@ -49,6 +53,7 @@
- /* this is a weak define that we are overriding */
- void pin_mux_usb(void)
- {
-+ struct udevice *dev;
- uchar val;
- int ret;
-
-@@ -59,15 +64,17 @@
- */
-
- /* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
-- ret = i2c_set_bus_num(0);
-- if (ret)
-- printf("i2c_set_bus_num failed: %d\n", ret);
-+ ret = i2c_get_chip_for_busnum(0, 0x20, &dev);
-+ if (ret) {
-+ printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
-+ return;
-+ }
- val = 0x03;
-- ret = i2c_write(0x20, 2, 1, &val, 1);
-+ ret = i2c_write(dev, 2, &val, 1);
- if (ret)
- printf("i2c_write 0 0x20 2 failed: %d\n", ret);
- val = 0xfc;
-- ret = i2c_write(0x20, 6, 1, &val, 1);
-+ ret = i2c_write(dev, 6, &val, 1);
- if (ret)
- printf("i2c_write 0 0x20 6 failed: %d\n", ret);
- }
-diff -ruN u-boot-2015.01-rc3/board/raspberrypi/rpi/rpi.c u-boot/board/raspberrypi/rpi/rpi.c
---- u-boot-2015.01-rc3/board/raspberrypi/rpi/rpi.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/raspberrypi/rpi/rpi.c 2015-01-01 17:34:32.469499711 +0100
-@@ -24,6 +24,7 @@
- #include <asm/arch/mbox.h>
- #include <asm/arch/sdhci.h>
- #include <asm/global_data.h>
-+#include <dm/platform_data/serial_pl01x.h>
-
- DECLARE_GLOBAL_DATA_PTR;
-
-@@ -36,6 +37,17 @@
- .platdata = &gpio_platdata,
- };
-
-+static const struct pl01x_serial_platdata serial_platdata = {
-+ .base = 0x20201000,
-+ .type = TYPE_PL011,
-+ .clock = 3000000,
-+};
-+
-+U_BOOT_DEVICE(bcm2835_serials) = {
-+ .name = "serial_pl01x",
-+ .platdata = &serial_platdata,
-+};
-+
- struct msg_get_arm_mem {
- struct bcm2835_mbox_hdr hdr;
- struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
-@@ -70,58 +82,82 @@
- static const struct {
- const char *name;
- const char *fdtfile;
-+ bool has_onboard_eth;
- } models[] = {
-+ [0] = {
-+ "Unknown model",
-+ "bcm2835-rpi-other.dtb",
-+ false,
-+ },
- [BCM2835_BOARD_REV_B_I2C0_2] = {
- "Model B (no P5)",
- "bcm2835-rpi-b-i2c0.dtb",
-+ true,
- },
- [BCM2835_BOARD_REV_B_I2C0_3] = {
- "Model B (no P5)",
- "bcm2835-rpi-b-i2c0.dtb",
-+ true,
- },
- [BCM2835_BOARD_REV_B_I2C1_4] = {
- "Model B",
- "bcm2835-rpi-b.dtb",
-+ true,
- },
- [BCM2835_BOARD_REV_B_I2C1_5] = {
- "Model B",
- "bcm2835-rpi-b.dtb",
-+ true,
- },
- [BCM2835_BOARD_REV_B_I2C1_6] = {
- "Model B",
- "bcm2835-rpi-b.dtb",
-+ true,
- },
- [BCM2835_BOARD_REV_A_7] = {
- "Model A",
- "bcm2835-rpi-a.dtb",
-+ false,
- },
- [BCM2835_BOARD_REV_A_8] = {
- "Model A",
- "bcm2835-rpi-a.dtb",
-+ false,
- },
- [BCM2835_BOARD_REV_A_9] = {
- "Model A",
- "bcm2835-rpi-a.dtb",
-+ false,
- },
- [BCM2835_BOARD_REV_B_REV2_d] = {
- "Model B rev2",
- "bcm2835-rpi-b-rev2.dtb",
-+ true,
- },
- [BCM2835_BOARD_REV_B_REV2_e] = {
- "Model B rev2",
- "bcm2835-rpi-b-rev2.dtb",
-+ true,
- },
- [BCM2835_BOARD_REV_B_REV2_f] = {
- "Model B rev2",
- "bcm2835-rpi-b-rev2.dtb",
-+ true,
- },
- [BCM2835_BOARD_REV_B_PLUS] = {
- "Model B+",
- "bcm2835-rpi-b-plus.dtb",
-+ true,
- },
- [BCM2835_BOARD_REV_CM] = {
- "Compute Module",
- "bcm2835-rpi-cm.dtb",
-+ false,
-+ },
-+ [BCM2835_BOARD_REV_A_PLUS] = {
-+ "Model A+",
-+ "bcm2835-rpi-a-plus.dtb",
-+ false,
- },
- };
-
-@@ -154,9 +190,6 @@
- return;
-
- fdtfile = models[rpi_board_rev].fdtfile;
-- if (!fdtfile)
-- fdtfile = "bcm2835-rpi-other.dtb";
--
- setenv("fdtfile", fdtfile);
- }
-
-@@ -165,6 +198,9 @@
- ALLOC_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1, 16);
- int ret;
-
-+ if (!models[rpi_board_rev].has_onboard_eth)
-+ return;
-+
- if (getenv("usbethaddr"))
- return;
-
-@@ -231,12 +267,17 @@
- }
-
- rpi_board_rev = msg->get_board_rev.body.resp.rev;
-- if (rpi_board_rev >= ARRAY_SIZE(models))
-+ if (rpi_board_rev >= ARRAY_SIZE(models)) {
-+ printf("RPI: Board rev %u outside known range\n",
-+ rpi_board_rev);
- rpi_board_rev = 0;
-+ }
-+ if (!models[rpi_board_rev].name) {
-+ printf("RPI: Board rev %u unknown\n", rpi_board_rev);
-+ rpi_board_rev = 0;
-+ }
-
- name = models[rpi_board_rev].name;
-- if (!name)
-- name = "Unknown model";
- printf("RPI model: %s\n", name);
- }
-
-diff -ruN u-boot-2015.01-rc3/board/renesas/alt/alt.c u-boot/board/renesas/alt/alt.c
---- u-boot-2015.01-rc3/board/renesas/alt/alt.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/renesas/alt/alt.c 2015-01-01 17:34:32.473499645 +0100
-@@ -15,6 +15,8 @@
- #include <asm/arch/sys_proto.h>
- #include <asm/gpio.h>
- #include <asm/arch/rmobile.h>
-+#include <asm/arch/rcar-mstp.h>
-+#include <asm/arch/mmc.h>
- #include <netdev.h>
- #include <miiphy.h>
- #include <i2c.h>
-@@ -37,30 +39,11 @@
- qos_init();
- }
-
--#define MSTPSR1 0xE6150038
--#define SMSTPCR1 0xE6150134
- #define TMU0_MSTP125 (1 << 25)
--
--#define MSTPSR7 0xE61501C4
--#define SMSTPCR7 0xE615014C
- #define SCIF2_MSTP719 (1 << 19)
--
--#define MSTPSR8 0xE61509A0
--#define SMSTPCR8 0xE6150990
- #define ETHER_MSTP813 (1 << 13)
--
--#define MSTPSR3 0xE6150048
--#define SMSTPCR3 0xE615013C
- #define IIC1_MSTP323 (1 << 23)
--
--#define mstp_setbits(type, addr, saddr, set) \
-- out_##type((saddr), in_##type(addr) | (set))
--#define mstp_clrbits(type, addr, saddr, clear) \
-- out_##type((saddr), in_##type(addr) & ~(clear))
--#define mstp_setbits_le32(addr, saddr, set) \
-- mstp_setbits(le32, addr, saddr, set)
--#define mstp_clrbits_le32(addr, saddr, clear) \
-- mstp_clrbits(le32, addr, saddr, clear)
-+#define MMC0_MSTP315 (1 << 15)
-
- int board_early_init_f(void)
- {
-@@ -76,15 +59,13 @@
- /* IIC1 / sh-i2c ch1 */
- mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
-
-+#ifdef CONFIG_SH_MMCIF
-+ /* MMC */
-+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
-+#endif
- return 0;
- }
-
--void arch_preboot_os(void)
--{
-- /* Disable TMU0 */
-- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
--}
--
- int board_init(void)
- {
- /* adress of boot parameters */
-@@ -145,6 +126,19 @@
- #endif
- }
-
-+int board_mmc_init(bd_t *bis)
-+{
-+ int ret = 0;
-+
-+#ifdef CONFIG_SH_MMCIF
-+ gpio_request(GPIO_GP_4_31, NULL);
-+ gpio_set_value(GPIO_GP_4_31, 1);
-+
-+ ret = mmcif_mmc_init();
-+#endif
-+ return ret;
-+}
-+
- int dram_init(void)
- {
- gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-diff -ruN u-boot-2015.01-rc3/board/renesas/alt/Makefile u-boot/board/renesas/alt/Makefile
---- u-boot-2015.01-rc3/board/renesas/alt/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/renesas/alt/Makefile 2015-01-01 17:34:32.473499645 +0100
-@@ -6,4 +6,4 @@
- # SPDX-License-Identifier: GPL-2.0
- #
-
--obj-y := alt.o qos.o
-+obj-y := alt.o qos.o ../rcar-gen2-common/common.o
-diff -ruN u-boot-2015.01-rc3/board/renesas/gose/gose.c u-boot/board/renesas/gose/gose.c
---- u-boot-2015.01-rc3/board/renesas/gose/gose.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/renesas/gose/gose.c 2015-01-01 17:34:32.473499645 +0100
-@@ -15,6 +15,7 @@
- #include <asm/arch/sys_proto.h>
- #include <asm/gpio.h>
- #include <asm/arch/rmobile.h>
-+#include <asm/arch/rcar-mstp.h>
- #include <netdev.h>
- #include <miiphy.h>
- #include <i2c.h>
-@@ -41,27 +42,10 @@
- qos_init();
- }
-
--#define MSTPSR1 0xE6150038
--#define SMSTPCR1 0xE6150134
- #define TMU0_MSTP125 (1 << 25)
--
--#define MSTPSR7 0xE61501C4
--#define SMSTPCR7 0xE615014C
- #define SCIF0_MSTP721 (1 << 21)
--
--#define MSTPSR8 0xE61509A0
--#define SMSTPCR8 0xE6150990
- #define ETHER_MSTP813 (1 << 13)
-
--#define mstp_setbits(type, addr, saddr, set) \
-- out_##type((saddr), in_##type(addr) | (set))
--#define mstp_clrbits(type, addr, saddr, clear) \
-- out_##type((saddr), in_##type(addr) & ~(clear))
--#define mstp_setbits_le32(addr, saddr, set) \
-- mstp_setbits(le32, addr, saddr, set)
--#define mstp_clrbits_le32(addr, saddr, clear) \
-- mstp_clrbits(le32, addr, saddr, clear)
--
- int board_early_init_f(void)
- {
- /* TMU0 */
-@@ -76,16 +60,6 @@
- return 0;
- }
-
--#define TSTR0 0x04
--#define TSTR0_STR0 0x01
--void arch_preboot_os(void)
--{
-- /* stop TMU0 */
-- mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0);
-- /* Disable TMU0 */
-- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
--}
--
- #define PUPR5 0xE6060114
- #define PUPR5_ETH 0x3FFC0000
- #define PUPR5_ETH_MAGIC (1 << 27)
-diff -ruN u-boot-2015.01-rc3/board/renesas/gose/Makefile u-boot/board/renesas/gose/Makefile
---- u-boot-2015.01-rc3/board/renesas/gose/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/renesas/gose/Makefile 2015-01-01 17:34:32.473499645 +0100
-@@ -6,4 +6,4 @@
- # SPDX-License-Identifier: GPL-2.0
- #
-
--obj-y := gose.o qos.o
-+obj-y := gose.o qos.o ../rcar-gen2-common/common.o
-diff -ruN u-boot-2015.01-rc3/board/renesas/koelsch/koelsch.c u-boot/board/renesas/koelsch/koelsch.c
---- u-boot-2015.01-rc3/board/renesas/koelsch/koelsch.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/renesas/koelsch/koelsch.c 2015-01-01 17:34:32.473499645 +0100
-@@ -16,6 +16,7 @@
- #include <asm/arch/sys_proto.h>
- #include <asm/gpio.h>
- #include <asm/arch/rmobile.h>
-+#include <asm/arch/rcar-mstp.h>
- #include <netdev.h>
- #include <miiphy.h>
- #include <i2c.h>
-@@ -43,27 +44,10 @@
- qos_init();
- }
-
--#define MSTPSR1 0xE6150038
--#define SMSTPCR1 0xE6150134
- #define TMU0_MSTP125 (1 << 25)
--
--#define MSTPSR7 0xE61501C4
--#define SMSTPCR7 0xE615014C
- #define SCIF0_MSTP721 (1 << 21)
--
--#define MSTPSR8 0xE61509A0
--#define SMSTPCR8 0xE6150990
- #define ETHER_MSTP813 (1 << 13)
-
--#define mstp_setbits(type, addr, saddr, set) \
-- out_##type((saddr), in_##type(addr) | (set))
--#define mstp_clrbits(type, addr, saddr, clear) \
-- out_##type((saddr), in_##type(addr) & ~(clear))
--#define mstp_setbits_le32(addr, saddr, set) \
-- mstp_setbits(le32, addr, saddr, set)
--#define mstp_clrbits_le32(addr, saddr, clear) \
-- mstp_clrbits(le32, addr, saddr, clear)
--
- int board_early_init_f(void)
- {
- mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
-@@ -77,12 +61,6 @@
- return 0;
- }
-
--void arch_preboot_os(void)
--{
-- /* Disable TMU0 */
-- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
--}
--
- /* LSI pin pull-up control */
- #define PUPR5 0xe6060114
- #define PUPR5_ETH 0x3FFC0000
-diff -ruN u-boot-2015.01-rc3/board/renesas/koelsch/Makefile u-boot/board/renesas/koelsch/Makefile
---- u-boot-2015.01-rc3/board/renesas/koelsch/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/renesas/koelsch/Makefile 2015-01-01 17:34:32.473499645 +0100
-@@ -6,4 +6,4 @@
- # SPDX-License-Identifier: GPL-2.0
- #
-
--obj-y := koelsch.o qos.o
-+obj-y := koelsch.o qos.o ../rcar-gen2-common/common.o
-diff -ruN u-boot-2015.01-rc3/board/renesas/lager/lager.c u-boot/board/renesas/lager/lager.c
---- u-boot-2015.01-rc3/board/renesas/lager/lager.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/renesas/lager/lager.c 2015-01-01 17:34:32.473499645 +0100
-@@ -18,8 +18,11 @@
- #include <asm/arch/sys_proto.h>
- #include <asm/gpio.h>
- #include <asm/arch/rmobile.h>
-+#include <asm/arch/rcar-mstp.h>
-+#include <asm/arch/mmc.h>
- #include <miiphy.h>
- #include <i2c.h>
-+#include <mmc.h>
- #include "qos.h"
-
- DECLARE_GLOBAL_DATA_PTR;
-@@ -50,26 +53,10 @@
- qos_init();
- }
-
--#define MSTPSR1 0xE6150038
--#define SMSTPCR1 0xE6150134
- #define TMU0_MSTP125 (1 << 25)
--
--#define MSTPSR7 0xE61501C4
--#define SMSTPCR7 0xE615014C
- #define SCIF0_MSTP721 (1 << 21)
--
--#define MSTPSR8 0xE61509A0
--#define SMSTPCR8 0xE6150990
- #define ETHER_MSTP813 (1 << 13)
--
--#define mstp_setbits(type, addr, saddr, set) \
-- out_##type((saddr), in_##type(addr) | (set))
--#define mstp_clrbits(type, addr, saddr, clear) \
-- out_##type((saddr), in_##type(addr) & ~(clear))
--#define mstp_setbits_le32(addr, saddr, set) \
-- mstp_setbits(le32, addr, saddr, set)
--#define mstp_clrbits_le32(addr, saddr, clear) \
-- mstp_clrbits(le32, addr, saddr, clear)
-+#define MMC1_MSTP305 (1 << 5)
-
- int board_early_init_f(void)
- {
-@@ -79,16 +66,12 @@
- mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
- /* ETHER */
- mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
-+ /* eMMC */
-+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC1_MSTP305);
-
- return 0;
- }
-
--void arch_preboot_os(void)
--{
-- /* Disable TMU0 */
-- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
--}
--
- DECLARE_GLOBAL_DATA_PTR;
- int board_init(void)
- {
-@@ -163,6 +146,28 @@
- return 0;
- }
-
-+int board_mmc_init(bd_t *bis)
-+{
-+ int ret = 0;
-+
-+#ifdef CONFIG_SH_MMCIF
-+ gpio_request(GPIO_FN_MMC1_D0, NULL);
-+ gpio_request(GPIO_FN_MMC1_D1, NULL);
-+ gpio_request(GPIO_FN_MMC1_D2, NULL);
-+ gpio_request(GPIO_FN_MMC1_D3, NULL);
-+ gpio_request(GPIO_FN_MMC1_D4, NULL);
-+ gpio_request(GPIO_FN_MMC1_D5, NULL);
-+ gpio_request(GPIO_FN_MMC1_D6, NULL);
-+ gpio_request(GPIO_FN_MMC1_D7, NULL);
-+ gpio_request(GPIO_FN_MMC1_CLK, NULL);
-+ gpio_request(GPIO_FN_MMC1_CMD, NULL);
-+
-+ ret = mmcif_mmc_init();
-+#endif
-+ return ret;
-+}
-+
-+
- int dram_init(void)
- {
- gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-diff -ruN u-boot-2015.01-rc3/board/renesas/lager/Makefile u-boot/board/renesas/lager/Makefile
---- u-boot-2015.01-rc3/board/renesas/lager/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/renesas/lager/Makefile 2015-01-01 17:34:32.473499645 +0100
-@@ -6,4 +6,4 @@
- # SPDX-License-Identifier: GPL-2.0
- #
-
--obj-y := lager.o qos.o
-+obj-y := lager.o qos.o ../rcar-gen2-common/common.o
-diff -ruN u-boot-2015.01-rc3/board/renesas/rcar-gen2-common/common.c u-boot/board/renesas/rcar-gen2-common/common.c
---- u-boot-2015.01-rc3/board/renesas/rcar-gen2-common/common.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/renesas/rcar-gen2-common/common.c 2015-01-01 17:34:32.477499579 +0100
-@@ -0,0 +1,59 @@
-+/*
-+ * board/renesas/rcar-gen2-common/common.c
-+ *
-+ * Copyright (C) 2013 Renesas Electronics Corporation
-+ * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/sys_proto.h>
-+#include <asm/arch/rmobile.h>
-+#include <asm/arch/rcar-mstp.h>
-+
-+#define TSTR0 0x04
-+#define TSTR0_STR0 0x01
-+
-+static struct mstp_ctl mstptbl[] = {
-+ { SMSTPCR0, MSTP0_BITS, CONFIG_SMSTP0_ENA,
-+ RMSTPCR0, MSTP0_BITS, CONFIG_RMSTP0_ENA },
-+ { SMSTPCR1, MSTP1_BITS, CONFIG_SMSTP1_ENA,
-+ RMSTPCR1, MSTP1_BITS, CONFIG_RMSTP1_ENA },
-+ { SMSTPCR2, MSTP2_BITS, CONFIG_SMSTP2_ENA,
-+ RMSTPCR2, MSTP2_BITS, CONFIG_RMSTP2_ENA },
-+ { SMSTPCR3, MSTP3_BITS, CONFIG_SMSTP3_ENA,
-+ RMSTPCR3, MSTP3_BITS, CONFIG_RMSTP3_ENA },
-+ { SMSTPCR4, MSTP4_BITS, CONFIG_SMSTP4_ENA,
-+ RMSTPCR4, MSTP4_BITS, CONFIG_RMSTP4_ENA },
-+ { SMSTPCR5, MSTP5_BITS, CONFIG_SMSTP5_ENA,
-+ RMSTPCR5, MSTP5_BITS, CONFIG_RMSTP5_ENA },
-+ /* No MSTP6 */
-+ { SMSTPCR7, MSTP7_BITS, CONFIG_SMSTP7_ENA,
-+ RMSTPCR7, MSTP7_BITS, CONFIG_RMSTP7_ENA },
-+ { SMSTPCR8, MSTP8_BITS, CONFIG_SMSTP8_ENA,
-+ RMSTPCR8, MSTP8_BITS, CONFIG_RMSTP8_ENA },
-+ { SMSTPCR9, MSTP9_BITS, CONFIG_SMSTP9_ENA,
-+ RMSTPCR9, MSTP9_BITS, CONFIG_RMSTP9_ENA },
-+ { SMSTPCR10, MSTP10_BITS, CONFIG_SMSTP10_ENA,
-+ RMSTPCR10, MSTP10_BITS, CONFIG_RMSTP10_ENA },
-+ { SMSTPCR11, MSTP11_BITS, CONFIG_SMSTP1_ENA,
-+ RMSTPCR11, MSTP11_BITS, CONFIG_RMSTP11_ENA },
-+};
-+
-+void arch_preboot_os(void)
-+{
-+ int i;
-+
-+ /* stop TMU0 */
-+ mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0);
-+
-+ /* Stop module clock */
-+ for (i = 0; i < ARRAY_SIZE(mstptbl); i++) {
-+ mstp_setclrbits_le32(mstptbl[i].s_addr, mstptbl[i].s_dis,
-+ mstptbl[i].s_ena);
-+ mstp_setclrbits_le32(mstptbl[i].r_addr, mstptbl[i].r_dis,
-+ mstptbl[i].r_ena);
-+ }
-+}
-diff -ruN u-boot-2015.01-rc3/board/solidrun/hummingboard/hummingboard.c u-boot/board/solidrun/hummingboard/hummingboard.c
---- u-boot-2015.01-rc3/board/solidrun/hummingboard/hummingboard.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/solidrun/hummingboard/hummingboard.c 2015-01-01 17:34:32.497499251 +0100
-@@ -146,7 +146,7 @@
- {
- struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
-
-- int ret = enable_fec_anatop_clock(ENET_25MHz);
-+ int ret = enable_fec_anatop_clock(ENET_25MHZ);
- if (ret)
- return ret;
-
-diff -ruN u-boot-2015.01-rc3/board/st/stv0991/Kconfig u-boot/board/st/stv0991/Kconfig
---- u-boot-2015.01-rc3/board/st/stv0991/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/st/stv0991/Kconfig 2015-01-01 17:34:32.501499185 +0100
-@@ -0,0 +1,23 @@
-+if TARGET_STV0991
-+
-+config SYS_CPU
-+ string
-+ default "armv7"
-+
-+config SYS_BOARD
-+ string
-+ default "stv0991"
-+
-+config SYS_VENDOR
-+ string
-+ default "st"
-+
-+config SYS_SOC
-+ string
-+ default "stv0991"
-+
-+config SYS_CONFIG_NAME
-+ string
-+ default "stv0991"
-+
-+endif
-diff -ruN u-boot-2015.01-rc3/board/st/stv0991/MAINTAINERS u-boot/board/st/stv0991/MAINTAINERS
---- u-boot-2015.01-rc3/board/st/stv0991/MAINTAINERS 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/st/stv0991/MAINTAINERS 2015-01-01 17:34:32.501499185 +0100
-@@ -0,0 +1,5 @@
-+STV0991 APPLICATION BOARD
-+M: Vikas Manocha <vikas.manocha@st.com>
-+S: Maintained
-+F: board/st/stv0991/
-+F: include/configs/stv0991.h
-diff -ruN u-boot-2015.01-rc3/board/st/stv0991/Makefile u-boot/board/st/stv0991/Makefile
---- u-boot-2015.01-rc3/board/st/stv0991/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/st/stv0991/Makefile 2015-01-01 17:34:32.501499185 +0100
-@@ -0,0 +1,8 @@
-+#
-+# (C) Copyright 2014
-+# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+obj-y := stv0991.o
-diff -ruN u-boot-2015.01-rc3/board/st/stv0991/stv0991.c u-boot/board/st/stv0991/stv0991.c
---- u-boot-2015.01-rc3/board/st/stv0991/stv0991.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/board/st/stv0991/stv0991.c 2015-01-01 17:34:32.501499185 +0100
-@@ -0,0 +1,104 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <miiphy.h>
-+#include <asm/arch/stv0991_periph.h>
-+#include <asm/arch/stv0991_defs.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/gpio.h>
-+#include <netdev.h>
-+#include <asm/io.h>
-+#include <dm/platdata.h>
-+#include <dm/platform_data/serial_pl01x.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+struct gpio_regs *const gpioa_regs =
-+ (struct gpio_regs *) GPIOA_BASE_ADDR;
-+
-+static const struct pl01x_serial_platdata serial_platdata = {
-+ .base = 0x80406000,
-+ .type = TYPE_PL011,
-+ .clock = 2700 * 1000,
-+};
-+
-+U_BOOT_DEVICE(stv09911_serials) = {
-+ .name = "serial_pl01x",
-+ .platdata = &serial_platdata,
-+};
-+
-+#ifdef CONFIG_SHOW_BOOT_PROGRESS
-+void show_boot_progress(int progress)
-+{
-+ printf("%i\n", progress);
-+}
-+#endif
-+
-+void enable_eth_phy(void)
-+{
-+ /* Set GPIOA_06 pad HIGH (Appli board)*/
-+ writel(readl(&gpioa_regs->dir) | 0x40, &gpioa_regs->dir);
-+ writel(readl(&gpioa_regs->data) | 0x40, &gpioa_regs->data);
-+}
-+int board_eth_enable(void)
-+{
-+ stv0991_pinmux_config(ETH_GPIOB_10_31_C_0_4);
-+ clock_setup(ETH_CLOCK_CFG);
-+ enable_eth_phy();
-+ return 0;
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+int board_init(void)
-+{
-+ board_eth_enable();
-+ return 0;
-+}
-+
-+int board_uart_init(void)
-+{
-+ stv0991_pinmux_config(UART_GPIOC_30_31);
-+ clock_setup(UART_CLOCK_CFG);
-+ return 0;
-+}
-+
-+#ifdef CONFIG_BOARD_EARLY_INIT_F
-+int board_early_init_f(void)
-+{
-+ board_uart_init();
-+ return 0;
-+}
-+#endif
-+
-+int dram_init(void)
-+{
-+ gd->ram_size = PHYS_SDRAM_1_SIZE;
-+ return 0;
-+}
-+
-+void dram_init_banksize(void)
-+{
-+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+}
-+
-+#ifdef CONFIG_CMD_NET
-+int board_eth_init(bd_t *bis)
-+{
-+ int ret = 0;
-+
-+#if defined(CONFIG_DESIGNWARE_ETH)
-+ u32 interface = PHY_INTERFACE_MODE_MII;
-+ if (designware_initialize(GMAC_BASE_ADDR, interface) >= 0)
-+ ret++;
-+#endif
-+ return ret;
-+}
-+#endif
-diff -ruN u-boot-2015.01-rc3/board/tbs/tbs2910/Kconfig u-boot/board/tbs/tbs2910/Kconfig
---- u-boot-2015.01-rc3/board/tbs/tbs2910/Kconfig 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/tbs/tbs2910/Kconfig 2015-01-01 17:34:32.505499121 +0100
-@@ -1,23 +1,15 @@
- if TARGET_TBS2910
-
--config SYS_CPU
-- string
-- default "armv7"
--
- config SYS_BOARD
-- string
- default "tbs2910"
-
- config SYS_VENDOR
-- string
- default "tbs"
-
- config SYS_SOC
-- string
- default "mx6"
-
- config SYS_CONFIG_NAME
-- string
- default "tbs2910"
-
- endif
-diff -ruN u-boot-2015.01-rc3/board/toradex/apalis_t30/apalis_t30.c u-boot/board/toradex/apalis_t30/apalis_t30.c
---- u-boot-2015.01-rc3/board/toradex/apalis_t30/apalis_t30.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/board/toradex/apalis_t30/apalis_t30.c 2015-01-01 17:34:32.509499055 +0100
-@@ -6,7 +6,7 @@
- */
-
- #include <common.h>
--
-+#include <dm.h>
- #include <asm/arch/gp_padctrl.h>
- #include <asm/arch/pinmux.h>
- #include <asm/gpio.h>
-@@ -38,23 +38,20 @@
- #ifdef CONFIG_PCI_TEGRA
- int tegra_pcie_board_init(void)
- {
-- unsigned int old_bus;
-+ struct udevice *dev;
- u8 addr, data[1];
- int err;
-
-- old_bus = i2c_get_bus_num();
--
-- err = i2c_set_bus_num(0);
-+ err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
- if (err) {
-- debug("failed to set I2C bus\n");
-+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
- return err;
- }
--
- /* TPS659110: VDD2_OP_REG = 1.05V */
- data[0] = 0x27;
- addr = 0x25;
-
-- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
-+ err = i2c_write(dev, addr, data, 1);
- if (err) {
- debug("failed to set VDD supply\n");
- return err;
-@@ -64,7 +61,7 @@
- data[0] = 0x0D;
- addr = 0x24;
-
-- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
-+ err = i2c_write(dev, addr, data, 1);
- if (err) {
- debug("failed to enable VDD supply\n");
- return err;
-@@ -74,14 +71,12 @@
- data[0] = 0x0D;
- addr = 0x35;
-
-- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
-+ err = i2c_write(dev, addr, data, 1);
- if (err) {
- debug("failed to set AVDD supply\n");
- return err;
- }
-
-- i2c_set_bus_num(old_bus);
--
- return 0;
- }
-
-diff -ruN u-boot-2015.01-rc3/common/board_f.c u-boot/common/board_f.c
---- u-boot-2015.01-rc3/common/board_f.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/common/board_f.c 2015-01-01 17:34:32.521498858 +0100
-@@ -813,7 +813,9 @@
- #endif
- setup_mon_len,
- setup_fdt,
-+#ifdef CONFIG_TRACE
- trace_early_init,
-+#endif
- initf_malloc,
- #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
- /* TODO: can this go into arch_cpu_init()? */
-diff -ruN u-boot-2015.01-rc3/common/cmd_dfu.c u-boot/common/cmd_dfu.c
---- u-boot-2015.01-rc3/common/cmd_dfu.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/common/cmd_dfu.c 2015-01-01 17:34:32.525498793 +0100
-@@ -38,10 +38,10 @@
-
- int controller_index = simple_strtoul(usb_controller, NULL, 0);
- board_usb_init(controller_index, USB_INIT_DEVICE);
-- dfu_clear_detach();
-+ g_dnl_clear_detach();
- g_dnl_register("usb_dnl_dfu");
- while (1) {
-- if (dfu_detach()) {
-+ if (g_dnl_detach()) {
- /*
- * Check if USB bus reset is performed after detach,
- * which indicates that -R switch has been passed to
-@@ -74,7 +74,7 @@
- if (dfu_reset)
- run_command("reset", 0);
-
-- dfu_clear_detach();
-+ g_dnl_clear_detach();
-
- return ret;
- }
-diff -ruN u-boot-2015.01-rc3/common/cmd_fastboot.c u-boot/common/cmd_fastboot.c
---- u-boot-2015.01-rc3/common/cmd_fastboot.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/common/cmd_fastboot.c 2015-01-01 17:34:32.525498793 +0100
-@@ -15,17 +15,21 @@
- {
- int ret;
-
-+ g_dnl_clear_detach();
- ret = g_dnl_register("usb_dnl_fastboot");
- if (ret)
- return ret;
-
- while (1) {
-+ if (g_dnl_detach())
-+ break;
- if (ctrlc())
- break;
- usb_gadget_handle_interrupts();
- }
-
- g_dnl_unregister();
-+ g_dnl_clear_detach();
- return CMD_RET_SUCCESS;
- }
-
-diff -ruN u-boot-2015.01-rc3/common/cmd_hash.c u-boot/common/cmd_hash.c
---- u-boot-2015.01-rc3/common/cmd_hash.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/common/cmd_hash.c 2015-01-01 17:34:32.529498727 +0100
-@@ -18,9 +18,9 @@
- static int do_hash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- {
- char *s;
--#ifdef CONFIG_HASH_VERIFY
- int flags = HASH_FLAG_ENV;
-
-+#ifdef CONFIG_HASH_VERIFY
- if (argc < 4)
- return CMD_RET_USAGE;
- if (!strcmp(argv[1], "-v")) {
-@@ -28,8 +28,6 @@
- argc--;
- argv++;
- }
--#else
-- const int flags = HASH_FLAG_ENV;
- #endif
- /* Move forward to 'algorithm' parameter */
- argc--;
-@@ -40,19 +38,19 @@
- }
-
- #ifdef CONFIG_HASH_VERIFY
--U_BOOT_CMD(
-- hash, 6, 1, do_hash,
-- "compute hash message digest",
-- "algorithm address count [[*]sum_dest]\n"
-- " - compute message digest [save to env var / *address]\n"
-- "hash -v algorithm address count [*]sum\n"
-- " - verify hash of memory area with env var / *address"
--);
-+#define HARGS 6
- #else
-+#define HARGS 5
-+#endif
-+
- U_BOOT_CMD(
-- hash, 5, 1, do_hash,
-- "compute message digest",
-- "algorithm address count [[*]sum_dest]\n"
-+ hash, HARGS, 1, do_hash,
-+ "compute hash message digest",
-+ "algorithm address count [[*]hash_dest]\n"
- " - compute message digest [save to env var / *address]"
--);
-+#ifdef CONFIG_HASH_VERIFY
-+ "\nhash -v algorithm address count [*]hash\n"
-+ " - verify message digest of memory area to immediate value, \n"
-+ " env var or *address"
- #endif
-+);
-diff -ruN u-boot-2015.01-rc3/common/cmd_i2c.c u-boot/common/cmd_i2c.c
---- u-boot-2015.01-rc3/common/cmd_i2c.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/common/cmd_i2c.c 2015-01-01 17:34:32.529498727 +0100
-@@ -69,8 +69,10 @@
- #include <bootretry.h>
- #include <cli.h>
- #include <command.h>
-+#include <dm.h>
- #include <edid.h>
- #include <environment.h>
-+#include <errno.h>
- #include <i2c.h>
- #include <malloc.h>
- #include <asm/byteorder.h>
-@@ -117,6 +119,60 @@
-
- #define DISP_LINE_LEN 16
-
-+/*
-+ * Default for driver model is to use the chip's existing address length.
-+ * For legacy code, this is not stored, so we need to use a suitable
-+ * default.
-+ */
-+#ifdef CONFIG_DM_I2C
-+#define DEFAULT_ADDR_LEN (-1)
-+#else
-+#define DEFAULT_ADDR_LEN 1
-+#endif
-+
-+#ifdef CONFIG_DM_I2C
-+static struct udevice *i2c_cur_bus;
-+
-+static int i2c_set_bus_num(unsigned int busnum)
-+{
-+ struct udevice *bus;
-+ int ret;
-+
-+ ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus);
-+ if (ret) {
-+ debug("%s: No bus %d\n", __func__, busnum);
-+ return ret;
-+ }
-+ i2c_cur_bus = bus;
-+
-+ return 0;
-+}
-+
-+static int i2c_get_cur_bus(struct udevice **busp)
-+{
-+ if (!i2c_cur_bus) {
-+ puts("No I2C bus selected\n");
-+ return -ENODEV;
-+ }
-+ *busp = i2c_cur_bus;
-+
-+ return 0;
-+}
-+
-+static int i2c_get_cur_bus_chip(uint chip_addr, struct udevice **devp)
-+{
-+ struct udevice *bus;
-+ int ret;
-+
-+ ret = i2c_get_cur_bus(&bus);
-+ if (ret)
-+ return ret;
-+
-+ return i2c_get_chip(bus, chip_addr, devp);
-+}
-+
-+#endif
-+
- /**
- * i2c_init_board() - Board-specific I2C bus init
- *
-@@ -143,7 +199,7 @@
- *
- * Returns I2C bus speed in Hz.
- */
--#if !defined(CONFIG_SYS_I2C)
-+#if !defined(CONFIG_SYS_I2C) && !defined(CONFIG_DM_I2C)
- /*
- * TODO: Implement architecture-specific get/set functions
- * Should go away, if we switched completely to new multibus support
-@@ -182,12 +238,12 @@
- *
- * Returns the address length.
- */
--static uint get_alen(char *arg)
-+static uint get_alen(char *arg, int default_len)
- {
- int j;
- int alen;
-
-- alen = 1;
-+ alen = default_len;
- for (j = 0; j < 8; j++) {
- if (arg[j] == '.') {
- alen = arg[j+1] - '0';
-@@ -227,8 +283,13 @@
- static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- {
- u_char chip;
-- uint devaddr, alen, length;
-+ uint devaddr, length;
-+ int alen;
- u_char *memaddr;
-+ int ret;
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *dev;
-+#endif
-
- if (argc != 5)
- return CMD_RET_USAGE;
-@@ -243,7 +304,7 @@
- * 2 bytes long. Some day it might be 3 bytes long :-).
- */
- devaddr = simple_strtoul(argv[2], NULL, 16);
-- alen = get_alen(argv[2]);
-+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
- if (alen > 3)
- return CMD_RET_USAGE;
-
-@@ -257,18 +318,31 @@
- */
- memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16);
-
-- if (i2c_read(chip, devaddr, alen, memaddr, length) != 0) {
-- i2c_report_err(-1, I2C_ERR_READ);
-- return 1;
-- }
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_get_cur_bus_chip(chip, &dev);
-+ if (!ret && alen != -1)
-+ ret = i2c_set_chip_offset_len(dev, alen);
-+ if (!ret)
-+ ret = i2c_read(dev, devaddr, memaddr, length);
-+#else
-+ ret = i2c_read(chip, devaddr, alen, memaddr, length);
-+#endif
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_READ);
-+
- return 0;
- }
-
- static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- {
- u_char chip;
-- uint devaddr, alen, length;
-+ uint devaddr, length;
-+ int alen;
- u_char *memaddr;
-+ int ret;
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *dev;
-+#endif
-
- if (argc != 5)
- return cmd_usage(cmdtp);
-@@ -288,7 +362,7 @@
- * 2 bytes long. Some day it might be 3 bytes long :-).
- */
- devaddr = simple_strtoul(argv[3], NULL, 16);
-- alen = get_alen(argv[3]);
-+ alen = get_alen(argv[3], DEFAULT_ADDR_LEN);
- if (alen > 3)
- return cmd_usage(cmdtp);
-
-@@ -297,10 +371,22 @@
- */
- length = simple_strtoul(argv[4], NULL, 16);
-
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_get_cur_bus_chip(chip, &dev);
-+ if (!ret && alen != -1)
-+ ret = i2c_set_chip_offset_len(dev, alen);
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_WRITE);
-+#endif
-+
- while (length-- > 0) {
-- if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) {
-- return i2c_report_err(-1, I2C_ERR_WRITE);
-- }
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_write(dev, devaddr++, memaddr++, 1);
-+#else
-+ ret = i2c_write(chip, devaddr++, alen, memaddr++, 1);
-+#endif
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_WRITE);
- /*
- * No write delay with FRAM devices.
- */
-@@ -311,6 +397,38 @@
- return 0;
- }
-
-+#ifdef CONFIG_DM_I2C
-+static int do_i2c_flags(cmd_tbl_t *cmdtp, int flag, int argc,
-+ char *const argv[])
-+{
-+ struct udevice *dev;
-+ uint flags;
-+ int chip;
-+ int ret;
-+
-+ if (argc < 2)
-+ return CMD_RET_USAGE;
-+
-+ chip = simple_strtoul(argv[1], NULL, 16);
-+ ret = i2c_get_cur_bus_chip(chip, &dev);
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_READ);
-+
-+ if (argc > 2) {
-+ flags = simple_strtoul(argv[2], NULL, 16);
-+ ret = i2c_set_chip_flags(dev, flags);
-+ } else {
-+ ret = i2c_get_chip_flags(dev, &flags);
-+ if (!ret)
-+ printf("%x\n", flags);
-+ }
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_READ);
-+
-+ return 0;
-+}
-+#endif
-+
- /**
- * do_i2c_md() - Handle the "i2c md" command-line command
- * @cmdtp: Command data struct pointer
-@@ -327,8 +445,13 @@
- static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- {
- u_char chip;
-- uint addr, alen, length;
-+ uint addr, length;
-+ int alen;
- int j, nbytes, linebytes;
-+ int ret;
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *dev;
-+#endif
-
- /* We use the last specified parameters, unless new ones are
- * entered.
-@@ -356,7 +479,7 @@
- * 2 bytes long. Some day it might be 3 bytes long :-).
- */
- addr = simple_strtoul(argv[2], NULL, 16);
-- alen = get_alen(argv[2]);
-+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
- if (alen > 3)
- return CMD_RET_USAGE;
-
-@@ -368,6 +491,14 @@
- length = simple_strtoul(argv[3], NULL, 16);
- }
-
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_get_cur_bus_chip(chip, &dev);
-+ if (!ret && alen != -1)
-+ ret = i2c_set_chip_offset_len(dev, alen);
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_READ);
-+#endif
-+
- /*
- * Print the lines.
- *
-@@ -381,8 +512,13 @@
-
- linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
-
-- if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0)
-- i2c_report_err(-1, I2C_ERR_READ);
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_read(dev, addr, linebuf, linebytes);
-+#else
-+ ret = i2c_read(chip, addr, alen, linebuf, linebytes);
-+#endif
-+ if (ret)
-+ i2c_report_err(ret, I2C_ERR_READ);
- else {
- printf("%04x:", addr);
- cp = linebuf;
-@@ -429,9 +565,13 @@
- {
- uchar chip;
- ulong addr;
-- uint alen;
-+ int alen;
- uchar byte;
- int count;
-+ int ret;
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *dev;
-+#endif
-
- if ((argc < 4) || (argc > 5))
- return CMD_RET_USAGE;
-@@ -445,10 +585,17 @@
- * Address is always specified.
- */
- addr = simple_strtoul(argv[2], NULL, 16);
-- alen = get_alen(argv[2]);
-+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
- if (alen > 3)
- return CMD_RET_USAGE;
-
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_get_cur_bus_chip(chip, &dev);
-+ if (!ret && alen != -1)
-+ ret = i2c_set_chip_offset_len(dev, alen);
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_WRITE);
-+#endif
- /*
- * Value to write is always specified.
- */
-@@ -463,8 +610,13 @@
- count = 1;
-
- while (count-- > 0) {
-- if (i2c_write(chip, addr++, alen, &byte, 1) != 0)
-- i2c_report_err(-1, I2C_ERR_WRITE);
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_write(dev, addr++, &byte, 1);
-+#else
-+ ret = i2c_write(chip, addr++, alen, &byte, 1);
-+#endif
-+ if (ret)
-+ i2c_report_err(ret, I2C_ERR_WRITE);
- /*
- * Wait for the write to complete. The write can take
- * up to 10mSec (we allow a little more time).
-@@ -499,11 +651,15 @@
- {
- uchar chip;
- ulong addr;
-- uint alen;
-+ int alen;
- int count;
- uchar byte;
- ulong crc;
- ulong err;
-+ int ret = 0;
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *dev;
-+#endif
-
- if (argc < 4)
- return CMD_RET_USAGE;
-@@ -517,10 +673,17 @@
- * Address is always specified.
- */
- addr = simple_strtoul(argv[2], NULL, 16);
-- alen = get_alen(argv[2]);
-+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
- if (alen > 3)
- return CMD_RET_USAGE;
-
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_get_cur_bus_chip(chip, &dev);
-+ if (!ret && alen != -1)
-+ ret = i2c_set_chip_offset_len(dev, alen);
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_READ);
-+#endif
- /*
- * Count is always specified
- */
-@@ -534,13 +697,18 @@
- crc = 0;
- err = 0;
- while (count-- > 0) {
-- if (i2c_read(chip, addr, alen, &byte, 1) != 0)
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_read(dev, addr, &byte, 1);
-+#else
-+ ret = i2c_read(chip, addr, alen, &byte, 1);
-+#endif
-+ if (ret)
- err++;
- crc = crc32 (crc, &byte, 1);
- addr++;
- }
- if (err > 0)
-- i2c_report_err(-1, I2C_ERR_READ);
-+ i2c_report_err(ret, I2C_ERR_READ);
- else
- printf ("%08lx\n", crc);
-
-@@ -568,10 +736,14 @@
- {
- uchar chip;
- ulong addr;
-- uint alen;
-+ int alen;
- ulong data;
- int size = 1;
- int nbytes;
-+ int ret;
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *dev;
-+#endif
-
- if (argc != 3)
- return CMD_RET_USAGE;
-@@ -601,19 +773,32 @@
- * Address is always specified.
- */
- addr = simple_strtoul(argv[2], NULL, 16);
-- alen = get_alen(argv[2]);
-+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
- if (alen > 3)
- return CMD_RET_USAGE;
- }
-
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_get_cur_bus_chip(chip, &dev);
-+ if (!ret && alen != -1)
-+ ret = i2c_set_chip_offset_len(dev, alen);
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_WRITE);
-+#endif
-+
- /*
- * Print the address, followed by value. Then accept input for
- * the next value. A non-converted value exits.
- */
- do {
- printf("%08lx:", addr);
-- if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0)
-- i2c_report_err(-1, I2C_ERR_READ);
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_read(dev, addr, (uchar *)&data, size);
-+#else
-+ ret = i2c_read(chip, addr, alen, (uchar *)&data, size);
-+#endif
-+ if (ret)
-+ i2c_report_err(ret, I2C_ERR_READ);
- else {
- data = cpu_to_be32(data);
- if (size == 1)
-@@ -655,8 +840,15 @@
- * good enough to not time out
- */
- bootretry_reset_cmd_timeout();
-- if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
-- i2c_report_err(-1, I2C_ERR_WRITE);
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_write(dev, addr, (uchar *)&data,
-+ size);
-+#else
-+ ret = i2c_write(chip, addr, alen,
-+ (uchar *)&data, size);
-+#endif
-+ if (ret)
-+ i2c_report_err(ret, I2C_ERR_WRITE);
- #ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
- #endif
-@@ -697,6 +889,13 @@
- int k, skip;
- unsigned int bus = GET_BUS_NUM;
- #endif /* NOPROBES */
-+ int ret;
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *bus, *dev;
-+
-+ if (i2c_get_cur_bus(&bus))
-+ return CMD_RET_FAILURE;
-+#endif
-
- if (argc == 2)
- addr = simple_strtol(argv[1], 0, 16);
-@@ -717,7 +916,12 @@
- if (skip)
- continue;
- #endif
-- if (i2c_probe(j) == 0) {
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_probe(bus, j, 0, &dev);
-+#else
-+ ret = i2c_probe(j);
-+#endif
-+ if (ret == 0) {
- printf(" %02X", j);
- found++;
- }
-@@ -754,11 +958,15 @@
- static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- {
- u_char chip;
-- ulong alen;
-+ int alen;
- uint addr;
- uint length;
- u_char bytes[16];
- int delay;
-+ int ret;
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *dev;
-+#endif
-
- if (argc < 3)
- return CMD_RET_USAGE;
-@@ -772,9 +980,16 @@
- * Address is always specified.
- */
- addr = simple_strtoul(argv[2], NULL, 16);
-- alen = get_alen(argv[2]);
-+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
- if (alen > 3)
- return CMD_RET_USAGE;
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_get_cur_bus_chip(chip, &dev);
-+ if (!ret && alen != -1)
-+ ret = i2c_set_chip_offset_len(dev, alen);
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_WRITE);
-+#endif
-
- /*
- * Length is the number of objects, not number of bytes.
-@@ -794,8 +1009,13 @@
- * Run the loop...
- */
- while (1) {
-- if (i2c_read(chip, addr, alen, bytes, length) != 0)
-- i2c_report_err(-1, I2C_ERR_READ);
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_read(dev, addr, bytes, length);
-+#else
-+ ret = i2c_read(chip, addr, alen, bytes, length);
-+#endif
-+ if (ret)
-+ i2c_report_err(ret, I2C_ERR_READ);
- udelay(delay);
- }
-
-@@ -1345,6 +1565,10 @@
- {
- u_char chip;
- struct edid1_info edid;
-+ int ret;
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *dev;
-+#endif
-
- if (argc < 2) {
- cmd_usage(cmdtp);
-@@ -1352,10 +1576,15 @@
- }
-
- chip = simple_strtoul(argv[1], NULL, 16);
-- if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) {
-- i2c_report_err(-1, I2C_ERR_READ);
-- return 1;
-- }
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_get_cur_bus_chip(chip, &dev);
-+ if (!ret)
-+ ret = i2c_read(dev, 0, (uchar *)&edid, sizeof(edid));
-+#else
-+ ret = i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid));
-+#endif
-+ if (ret)
-+ return i2c_report_err(ret, I2C_ERR_READ);
-
- if (edid_check_info(&edid)) {
- puts("Content isn't valid EDID.\n");
-@@ -1437,17 +1666,28 @@
- * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
- * on error.
- */
--#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
-+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) || \
-+ defined(CONFIG_DM_I2C)
- static int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
- {
- int ret = 0;
-- unsigned int bus_no;
-+ int bus_no;
-
-- if (argc == 1)
-+ if (argc == 1) {
- /* querying current setting */
-- printf("Current bus is %d\n", i2c_get_bus_num());
-- else {
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *bus;
-+
-+ if (!i2c_get_cur_bus(&bus))
-+ bus_no = bus->seq;
-+ else
-+ bus_no = -1;
-+#else
-+ bus_no = i2c_get_bus_num();
-+#endif
-+ printf("Current bus is %d\n", bus_no);
-+ } else {
- bus_no = simple_strtoul(argv[1], NULL, 10);
- #if defined(CONFIG_SYS_I2C)
- if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
-@@ -1478,13 +1718,28 @@
- {
- int speed, ret=0;
-
-- if (argc == 1)
-+#ifdef CONFIG_DM_I2C
-+ struct udevice *bus;
-+
-+ if (i2c_get_cur_bus(&bus))
-+ return 1;
-+#endif
-+ if (argc == 1) {
-+#ifdef CONFIG_DM_I2C
-+ speed = i2c_get_bus_speed(bus);
-+#else
-+ speed = i2c_get_bus_speed();
-+#endif
- /* querying current speed */
-- printf("Current bus speed=%d\n", i2c_get_bus_speed());
-- else {
-+ printf("Current bus speed=%d\n", speed);
-+ } else {
- speed = simple_strtoul(argv[1], NULL, 10);
- printf("Setting bus speed to %d Hz\n", speed);
-+#ifdef CONFIG_DM_I2C
-+ ret = i2c_set_bus_speed(bus, speed);
-+#else
- ret = i2c_set_bus_speed(speed);
-+#endif
- if (ret)
- printf("Failure changing bus speed (%d)\n", ret);
- }
-@@ -1532,7 +1787,16 @@
- */
- static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
- {
--#if defined(CONFIG_SYS_I2C)
-+#if defined(CONFIG_DM_I2C)
-+ struct udevice *bus;
-+
-+ if (i2c_get_cur_bus(&bus))
-+ return CMD_RET_FAILURE;
-+ if (i2c_deblock(bus)) {
-+ printf("Error: Not supported by the driver\n");
-+ return CMD_RET_FAILURE;
-+ }
-+#elif defined(CONFIG_SYS_I2C)
- i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
- #else
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-@@ -1546,7 +1810,7 @@
- #endif
- U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
- #if defined(CONFIG_SYS_I2C) || \
-- defined(CONFIG_I2C_MULTI_BUS)
-+ defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
- U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
- #endif /* CONFIG_I2C_MULTI_BUS */
- #if defined(CONFIG_I2C_EDID)
-@@ -1560,6 +1824,9 @@
- U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
- U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
- U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
-+#ifdef CONFIG_DM_I2C
-+ U_BOOT_CMD_MKENT(flags, 2, 1, do_i2c_flags, "", ""),
-+#endif
- U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""),
- #if defined(CONFIG_CMD_SDRAM)
- U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""),
-@@ -1610,7 +1877,7 @@
- #endif
- "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
- #if defined(CONFIG_SYS_I2C) || \
-- defined(CONFIG_I2C_MULTI_BUS)
-+ defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
- "i2c dev [dev] - show or set current I2C bus\n"
- #endif /* CONFIG_I2C_MULTI_BUS */
- #if defined(CONFIG_I2C_EDID)
-@@ -1622,8 +1889,11 @@
- "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
- "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
- "i2c probe [address] - test for and show device(s) on the I2C bus\n"
-- "i2c read chip address[.0, .1, .2] length memaddress - read to memory \n"
-+ "i2c read chip address[.0, .1, .2] length memaddress - read to memory\n"
- "i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
-+#ifdef CONFIG_DM_I2C
-+ "i2c flags chip [flags] - set or get chip flags\n"
-+#endif
- "i2c reset - re-init the I2C Controller\n"
- #if defined(CONFIG_CMD_SDRAM)
- "i2c sdram chip - print SDRAM configuration information\n"
-diff -ruN u-boot-2015.01-rc3/common/cmd_mmc.c u-boot/common/cmd_mmc.c
---- u-boot-2015.01-rc3/common/cmd_mmc.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/common/cmd_mmc.c 2015-01-01 17:34:32.529498727 +0100
-@@ -90,7 +90,8 @@
- puts("Capacity: ");
- print_size(mmc->capacity, "\n");
-
-- printf("Bus Width: %d-bit\n", mmc->bus_width);
-+ printf("Bus Width: %d-bit%s\n", mmc->bus_width,
-+ mmc->ddr_mode ? " DDR" : "");
- }
- static struct mmc *init_mmc_device(int dev, bool force_init)
- {
-diff -ruN u-boot-2015.01-rc3/common/fb_mmc.c u-boot/common/fb_mmc.c
---- u-boot-2015.01-rc3/common/fb_mmc.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/common/fb_mmc.c 2015-01-01 17:34:32.537498596 +0100
-@@ -4,12 +4,17 @@
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-+#include <config.h>
- #include <common.h>
- #include <fb_mmc.h>
- #include <part.h>
- #include <aboot.h>
- #include <sparse_format.h>
-
-+#ifndef CONFIG_FASTBOOT_GPT_NAME
-+#define CONFIG_FASTBOOT_GPT_NAME GPT_ENTRY_NAME
-+#endif
-+
- /* The 64 defined bytes plus the '\0' */
- #define RESPONSE_LEN (64 + 1)
-
-@@ -62,7 +67,6 @@
- void fb_mmc_flash_write(const char *cmd, void *download_buffer,
- unsigned int download_bytes, char *response)
- {
-- int ret;
- block_dev_desc_t *dev_desc;
- disk_partition_t info;
-
-@@ -76,8 +80,24 @@
- return;
- }
-
-- ret = get_partition_info_efi_by_name(dev_desc, cmd, &info);
-- if (ret) {
-+ if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0) {
-+ printf("%s: updating MBR, Primary and Backup GPT(s)\n",
-+ __func__);
-+ if (is_valid_gpt_buf(dev_desc, download_buffer)) {
-+ printf("%s: invalid GPT - refusing to write to flash\n",
-+ __func__);
-+ fastboot_fail("invalid GPT partition");
-+ return;
-+ }
-+ if (write_mbr_and_gpt_partitions(dev_desc, download_buffer)) {
-+ printf("%s: writing GPT partitions failed\n", __func__);
-+ fastboot_fail("writing GPT partitions failed");
-+ return;
-+ }
-+ printf("........ success\n");
-+ fastboot_okay("");
-+ return;
-+ } else if (get_partition_info_efi_by_name(dev_desc, cmd, &info)) {
- error("cannot find partition: '%s'\n", cmd);
- fastboot_fail("cannot find partition");
- return;
-diff -ruN u-boot-2015.01-rc3/common/hash.c u-boot/common/hash.c
---- u-boot-2015.01-rc3/common/hash.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/common/hash.c 2015-01-01 17:34:32.537498596 +0100
-@@ -256,7 +256,7 @@
- env_var = 1;
- }
-
-- if (env_var) {
-+ if (!env_var) {
- ulong addr;
- void *buf;
-
-@@ -347,7 +347,7 @@
- {
- ulong addr, len;
-
-- if (argc < 2)
-+ if ((argc < 2) || ((flags & HASH_FLAG_VERIFY) && (argc < 3)))
- return CMD_RET_USAGE;
-
- addr = simple_strtoul(*argv++, NULL, 16);
-@@ -380,8 +380,6 @@
- #else
- if (0) {
- #endif
-- if (!argc)
-- return CMD_RET_USAGE;
- if (parse_verify_sum(algo, *argv, vsum,
- flags & HASH_FLAG_ENV)) {
- printf("ERROR: %s does not contain a valid "
-diff -ruN u-boot-2015.01-rc3/configs/armadillo-800eva_defconfig u-boot/configs/armadillo-800eva_defconfig
---- u-boot-2015.01-rc3/configs/armadillo-800eva_defconfig 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/configs/armadillo-800eva_defconfig 2015-01-01 17:34:32.557498268 +0100
-@@ -1,3 +1,3 @@
- CONFIG_ARM=y
--+S:CONFIG_RMOBILE=y
-+CONFIG_RMOBILE=y
- CONFIG_TARGET_ARMADILLO_800EVA=y
-diff -ruN u-boot-2015.01-rc3/configs/crownbay_defconfig u-boot/configs/crownbay_defconfig
---- u-boot-2015.01-rc3/configs/crownbay_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/configs/crownbay_defconfig 2015-01-01 17:34:32.561498202 +0100
-@@ -0,0 +1,6 @@
-+CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff00000"
-+CONFIG_X86=y
-+CONFIG_TARGET_CROWNBAY=y
-+CONFIG_OF_CONTROL=y
-+CONFIG_OF_SEPARATE=y
-+CONFIG_DEFAULT_DEVICE_TREE="crownbay"
-diff -ruN u-boot-2015.01-rc3/configs/kzm9g_defconfig u-boot/configs/kzm9g_defconfig
---- u-boot-2015.01-rc3/configs/kzm9g_defconfig 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/configs/kzm9g_defconfig 2015-01-01 17:34:32.561498202 +0100
-@@ -1,3 +1,3 @@
- CONFIG_ARM=y
--+S:CONFIG_RMOBILE=y
-+CONFIG_RMOBILE=y
- CONFIG_TARGET_KZM9G=y
-diff -ruN u-boot-2015.01-rc3/configs/ls1021aqds_nand_defconfig u-boot/configs/ls1021aqds_nand_defconfig
---- u-boot-2015.01-rc3/configs/ls1021aqds_nand_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/configs/ls1021aqds_nand_defconfig 2015-01-01 17:34:32.561498202 +0100
-@@ -0,0 +1,4 @@
-+CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
-++S:CONFIG_ARM=y
-++S:CONFIG_TARGET_LS1021AQDS=y
-diff -ruN u-boot-2015.01-rc3/configs/ls1021aqds_qspi_defconfig u-boot/configs/ls1021aqds_qspi_defconfig
---- u-boot-2015.01-rc3/configs/ls1021aqds_qspi_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/configs/ls1021aqds_qspi_defconfig 2015-01-01 17:34:32.561498202 +0100
-@@ -0,0 +1,3 @@
-+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
-++S:CONFIG_ARM=y
-++S:CONFIG_TARGET_LS1021AQDS=y
-diff -ruN u-boot-2015.01-rc3/configs/ls1021aqds_sdcard_defconfig u-boot/configs/ls1021aqds_sdcard_defconfig
---- u-boot-2015.01-rc3/configs/ls1021aqds_sdcard_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/configs/ls1021aqds_sdcard_defconfig 2015-01-01 17:34:32.565498136 +0100
-@@ -0,0 +1,4 @@
-+CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
-++S:CONFIG_ARM=y
-++S:CONFIG_TARGET_LS1021AQDS=y
-diff -ruN u-boot-2015.01-rc3/configs/ls1021atwr_qspi_defconfig u-boot/configs/ls1021atwr_qspi_defconfig
---- u-boot-2015.01-rc3/configs/ls1021atwr_qspi_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/configs/ls1021atwr_qspi_defconfig 2015-01-01 17:34:32.565498136 +0100
-@@ -0,0 +1,3 @@
-+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
-++S:CONFIG_ARM=y
-++S:CONFIG_TARGET_LS1021ATWR=y
-diff -ruN u-boot-2015.01-rc3/configs/ls1021atwr_sdcard_defconfig u-boot/configs/ls1021atwr_sdcard_defconfig
---- u-boot-2015.01-rc3/configs/ls1021atwr_sdcard_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/configs/ls1021atwr_sdcard_defconfig 2015-01-01 17:34:32.565498136 +0100
-@@ -0,0 +1,4 @@
-+CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
-++S:CONFIG_ARM=y
-++S:CONFIG_TARGET_LS1021ATWR=y
-diff -ruN u-boot-2015.01-rc3/configs/nyan-big_defconfig u-boot/configs/nyan-big_defconfig
---- u-boot-2015.01-rc3/configs/nyan-big_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/configs/nyan-big_defconfig 2015-01-01 17:34:32.565498136 +0100
-@@ -0,0 +1,5 @@
-++S:CONFIG_ARM=y
-++S:CONFIG_TEGRA=y
-++S:CONFIG_TEGRA124=y
-++S:CONFIG_TARGET_NYAN_BIG=y
-+CONFIG_DEFAULT_DEVICE_TREE="tegra124-nyan-big"
-diff -ruN u-boot-2015.01-rc3/configs/ph1_ld4_defconfig u-boot/configs/ph1_ld4_defconfig
---- u-boot-2015.01-rc3/configs/ph1_ld4_defconfig 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/configs/ph1_ld4_defconfig 2015-01-01 17:34:32.565498136 +0100
-@@ -1,4 +1,3 @@
--CONFIG_SPL=y
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- +S:CONFIG_ARM=y
-diff -ruN u-boot-2015.01-rc3/configs/ph1_pro4_defconfig u-boot/configs/ph1_pro4_defconfig
---- u-boot-2015.01-rc3/configs/ph1_pro4_defconfig 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/configs/ph1_pro4_defconfig 2015-01-01 17:34:32.565498136 +0100
-@@ -1,4 +1,3 @@
--CONFIG_SPL=y
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- +S:CONFIG_ARM=y
-diff -ruN u-boot-2015.01-rc3/configs/ph1_sld8_defconfig u-boot/configs/ph1_sld8_defconfig
---- u-boot-2015.01-rc3/configs/ph1_sld8_defconfig 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/configs/ph1_sld8_defconfig 2015-01-01 17:34:32.565498136 +0100
-@@ -1,4 +1,3 @@
--CONFIG_SPL=y
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
- +S:CONFIG_ARM=y
-diff -ruN u-boot-2015.01-rc3/configs/stv0991_defconfig u-boot/configs/stv0991_defconfig
---- u-boot-2015.01-rc3/configs/stv0991_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/configs/stv0991_defconfig 2015-01-01 17:34:32.569498072 +0100
-@@ -0,0 +1,3 @@
-+CONFIG_SYS_EXTRA_OPTIONS="stv0991"
-+CONFIG_ARM=y
-+CONFIG_TARGET_STV0991=y
-diff -ruN u-boot-2015.01-rc3/disk/part_efi.c u-boot/disk/part_efi.c
---- u-boot-2015.01-rc3/disk/part_efi.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/disk/part_efi.c 2015-01-01 17:34:32.573498006 +0100
-@@ -69,6 +69,107 @@
- sizeof(efi_guid_t));
- }
-
-+static int validate_gpt_header(gpt_header *gpt_h, lbaint_t lba,
-+ lbaint_t lastlba)
-+{
-+ uint32_t crc32_backup = 0;
-+ uint32_t calc_crc32;
-+
-+ /* Check the GPT header signature */
-+ if (le64_to_cpu(gpt_h->signature) != GPT_HEADER_SIGNATURE) {
-+ printf("%s signature is wrong: 0x%llX != 0x%llX\n",
-+ "GUID Partition Table Header",
-+ le64_to_cpu(gpt_h->signature),
-+ GPT_HEADER_SIGNATURE);
-+ return -1;
-+ }
-+
-+ /* Check the GUID Partition Table CRC */
-+ memcpy(&crc32_backup, &gpt_h->header_crc32, sizeof(crc32_backup));
-+ memset(&gpt_h->header_crc32, 0, sizeof(gpt_h->header_crc32));
-+
-+ calc_crc32 = efi_crc32((const unsigned char *)gpt_h,
-+ le32_to_cpu(gpt_h->header_size));
-+
-+ memcpy(&gpt_h->header_crc32, &crc32_backup, sizeof(crc32_backup));
-+
-+ if (calc_crc32 != le32_to_cpu(crc32_backup)) {
-+ printf("%s CRC is wrong: 0x%x != 0x%x\n",
-+ "GUID Partition Table Header",
-+ le32_to_cpu(crc32_backup), calc_crc32);
-+ return -1;
-+ }
-+
-+ /*
-+ * Check that the my_lba entry points to the LBA that contains the GPT
-+ */
-+ if (le64_to_cpu(gpt_h->my_lba) != lba) {
-+ printf("GPT: my_lba incorrect: %llX != " LBAF "\n",
-+ le64_to_cpu(gpt_h->my_lba),
-+ lba);
-+ return -1;
-+ }
-+
-+ /*
-+ * Check that the first_usable_lba and that the last_usable_lba are
-+ * within the disk.
-+ */
-+ if (le64_to_cpu(gpt_h->first_usable_lba) > lastlba) {
-+ printf("GPT: first_usable_lba incorrect: %llX > " LBAF "\n",
-+ le64_to_cpu(gpt_h->first_usable_lba), lastlba);
-+ return -1;
-+ }
-+ if (le64_to_cpu(gpt_h->last_usable_lba) > lastlba) {
-+ printf("GPT: last_usable_lba incorrect: %llX > " LBAF "\n",
-+ le64_to_cpu(gpt_h->last_usable_lba), lastlba);
-+ return -1;
-+ }
-+
-+ debug("GPT: first_usable_lba: %llX last_usable_lba: %llX last lba: "
-+ LBAF "\n", le64_to_cpu(gpt_h->first_usable_lba),
-+ le64_to_cpu(gpt_h->last_usable_lba), lastlba);
-+
-+ return 0;
-+}
-+
-+static int validate_gpt_entries(gpt_header *gpt_h, gpt_entry *gpt_e)
-+{
-+ uint32_t calc_crc32;
-+
-+ /* Check the GUID Partition Table Entry Array CRC */
-+ calc_crc32 = efi_crc32((const unsigned char *)gpt_e,
-+ le32_to_cpu(gpt_h->num_partition_entries) *
-+ le32_to_cpu(gpt_h->sizeof_partition_entry));
-+
-+ if (calc_crc32 != le32_to_cpu(gpt_h->partition_entry_array_crc32)) {
-+ printf("%s: 0x%x != 0x%x\n",
-+ "GUID Partition Table Entry Array CRC is wrong",
-+ le32_to_cpu(gpt_h->partition_entry_array_crc32),
-+ calc_crc32);
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+static void prepare_backup_gpt_header(gpt_header *gpt_h)
-+{
-+ uint32_t calc_crc32;
-+ uint64_t val;
-+
-+ /* recalculate the values for the Backup GPT Header */
-+ val = le64_to_cpu(gpt_h->my_lba);
-+ gpt_h->my_lba = gpt_h->alternate_lba;
-+ gpt_h->alternate_lba = cpu_to_le64(val);
-+ gpt_h->partition_entry_lba =
-+ cpu_to_le64(le64_to_cpu(gpt_h->last_usable_lba) + 1);
-+ gpt_h->header_crc32 = 0;
-+
-+ calc_crc32 = efi_crc32((const unsigned char *)gpt_h,
-+ le32_to_cpu(gpt_h->header_size));
-+ gpt_h->header_crc32 = cpu_to_le32(calc_crc32);
-+}
-+
- #ifdef CONFIG_EFI_PARTITION
- /*
- * Public Functions (include/part.h)
-@@ -259,7 +360,6 @@
- const int pte_blk_cnt = BLOCK_CNT((gpt_h->num_partition_entries
- * sizeof(gpt_entry)), dev_desc);
- u32 calc_crc32;
-- u64 val;
-
- debug("max lba: %x\n", (u32) dev_desc->lba);
- /* Setup the Protective MBR */
-@@ -284,15 +384,7 @@
- != pte_blk_cnt)
- goto err;
-
-- /* recalculate the values for the Backup GPT Header */
-- val = le64_to_cpu(gpt_h->my_lba);
-- gpt_h->my_lba = gpt_h->alternate_lba;
-- gpt_h->alternate_lba = cpu_to_le64(val);
-- gpt_h->header_crc32 = 0;
--
-- calc_crc32 = efi_crc32((const unsigned char *)gpt_h,
-- le32_to_cpu(gpt_h->header_size));
-- gpt_h->header_crc32 = cpu_to_le32(calc_crc32);
-+ prepare_backup_gpt_header(gpt_h);
-
- if (dev_desc->block_write(dev_desc->dev,
- (lbaint_t)le64_to_cpu(gpt_h->last_usable_lba)
-@@ -455,6 +547,97 @@
- free(gpt_h);
- return ret;
- }
-+
-+int is_valid_gpt_buf(block_dev_desc_t *dev_desc, void *buf)
-+{
-+ gpt_header *gpt_h;
-+ gpt_entry *gpt_e;
-+
-+ /* determine start of GPT Header in the buffer */
-+ gpt_h = buf + (GPT_PRIMARY_PARTITION_TABLE_LBA *
-+ dev_desc->blksz);
-+ if (validate_gpt_header(gpt_h, GPT_PRIMARY_PARTITION_TABLE_LBA,
-+ dev_desc->lba))
-+ return -1;
-+
-+ /* determine start of GPT Entries in the buffer */
-+ gpt_e = buf + (le64_to_cpu(gpt_h->partition_entry_lba) *
-+ dev_desc->blksz);
-+ if (validate_gpt_entries(gpt_h, gpt_e))
-+ return -1;
-+
-+ return 0;
-+}
-+
-+int write_mbr_and_gpt_partitions(block_dev_desc_t *dev_desc, void *buf)
-+{
-+ gpt_header *gpt_h;
-+ gpt_entry *gpt_e;
-+ int gpt_e_blk_cnt;
-+ lbaint_t lba;
-+ int cnt;
-+
-+ if (is_valid_gpt_buf(dev_desc, buf))
-+ return -1;
-+
-+ /* determine start of GPT Header in the buffer */
-+ gpt_h = buf + (GPT_PRIMARY_PARTITION_TABLE_LBA *
-+ dev_desc->blksz);
-+
-+ /* determine start of GPT Entries in the buffer */
-+ gpt_e = buf + (le64_to_cpu(gpt_h->partition_entry_lba) *
-+ dev_desc->blksz);
-+ gpt_e_blk_cnt = BLOCK_CNT((le32_to_cpu(gpt_h->num_partition_entries) *
-+ le32_to_cpu(gpt_h->sizeof_partition_entry)),
-+ dev_desc);
-+
-+ /* write MBR */
-+ lba = 0; /* MBR is always at 0 */
-+ cnt = 1; /* MBR (1 block) */
-+ if (dev_desc->block_write(dev_desc->dev, lba, cnt, buf) != cnt) {
-+ printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n",
-+ __func__, "MBR", cnt, lba);
-+ return 1;
-+ }
-+
-+ /* write Primary GPT */
-+ lba = GPT_PRIMARY_PARTITION_TABLE_LBA;
-+ cnt = 1; /* GPT Header (1 block) */
-+ if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_h) != cnt) {
-+ printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n",
-+ __func__, "Primary GPT Header", cnt, lba);
-+ return 1;
-+ }
-+
-+ lba = le64_to_cpu(gpt_h->partition_entry_lba);
-+ cnt = gpt_e_blk_cnt;
-+ if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_e) != cnt) {
-+ printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n",
-+ __func__, "Primary GPT Entries", cnt, lba);
-+ return 1;
-+ }
-+
-+ prepare_backup_gpt_header(gpt_h);
-+
-+ /* write Backup GPT */
-+ lba = le64_to_cpu(gpt_h->partition_entry_lba);
-+ cnt = gpt_e_blk_cnt;
-+ if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_e) != cnt) {
-+ printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n",
-+ __func__, "Backup GPT Entries", cnt, lba);
-+ return 1;
-+ }
-+
-+ lba = le64_to_cpu(gpt_h->my_lba);
-+ cnt = 1; /* GPT Header (1 block) */
-+ if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_h) != cnt) {
-+ printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n",
-+ __func__, "Backup GPT Header", cnt, lba);
-+ return 1;
-+ }
-+
-+ return 0;
-+}
- #endif
-
- /*
-@@ -511,10 +694,6 @@
- static int is_gpt_valid(block_dev_desc_t *dev_desc, u64 lba,
- gpt_header *pgpt_head, gpt_entry **pgpt_pte)
- {
-- u32 crc32_backup = 0;
-- u32 calc_crc32;
-- u64 lastlba;
--
- if (!dev_desc || !pgpt_head) {
- printf("%s: Invalid Argument(s)\n", __func__);
- return 0;
-@@ -527,55 +706,8 @@
- return 0;
- }
-
-- /* Check the GPT header signature */
-- if (le64_to_cpu(pgpt_head->signature) != GPT_HEADER_SIGNATURE) {
-- printf("GUID Partition Table Header signature is wrong:"
-- "0x%llX != 0x%llX\n",
-- le64_to_cpu(pgpt_head->signature),
-- GPT_HEADER_SIGNATURE);
-- return 0;
-- }
--
-- /* Check the GUID Partition Table CRC */
-- memcpy(&crc32_backup, &pgpt_head->header_crc32, sizeof(crc32_backup));
-- memset(&pgpt_head->header_crc32, 0, sizeof(pgpt_head->header_crc32));
--
-- calc_crc32 = efi_crc32((const unsigned char *)pgpt_head,
-- le32_to_cpu(pgpt_head->header_size));
--
-- memcpy(&pgpt_head->header_crc32, &crc32_backup, sizeof(crc32_backup));
--
-- if (calc_crc32 != le32_to_cpu(crc32_backup)) {
-- printf("GUID Partition Table Header CRC is wrong:"
-- "0x%x != 0x%x\n",
-- le32_to_cpu(crc32_backup), calc_crc32);
-- return 0;
-- }
--
-- /* Check that the my_lba entry points to the LBA that contains the GPT */
-- if (le64_to_cpu(pgpt_head->my_lba) != lba) {
-- printf("GPT: my_lba incorrect: %llX != %" PRIX64 "\n",
-- le64_to_cpu(pgpt_head->my_lba),
-- lba);
-+ if (validate_gpt_header(pgpt_head, (lbaint_t)lba, dev_desc->lba))
- return 0;
-- }
--
-- /* Check the first_usable_lba and last_usable_lba are within the disk. */
-- lastlba = (u64)dev_desc->lba;
-- if (le64_to_cpu(pgpt_head->first_usable_lba) > lastlba) {
-- printf("GPT: first_usable_lba incorrect: %llX > %" PRIX64 "\n",
-- le64_to_cpu(pgpt_head->first_usable_lba), lastlba);
-- return 0;
-- }
-- if (le64_to_cpu(pgpt_head->last_usable_lba) > lastlba) {
-- printf("GPT: last_usable_lba incorrect: %llX > %" PRIX64 "\n",
-- le64_to_cpu(pgpt_head->last_usable_lba), lastlba);
-- return 0;
-- }
--
-- debug("GPT: first_usable_lba: %llX last_usable_lba %llX last lba %"
-- PRIX64 "\n", le64_to_cpu(pgpt_head->first_usable_lba),
-- le64_to_cpu(pgpt_head->last_usable_lba), lastlba);
-
- /* Read and allocate Partition Table Entries */
- *pgpt_pte = alloc_read_gpt_entries(dev_desc, pgpt_head);
-@@ -584,17 +716,7 @@
- return 0;
- }
-
-- /* Check the GUID Partition Table Entry Array CRC */
-- calc_crc32 = efi_crc32((const unsigned char *)*pgpt_pte,
-- le32_to_cpu(pgpt_head->num_partition_entries) *
-- le32_to_cpu(pgpt_head->sizeof_partition_entry));
--
-- if (calc_crc32 != le32_to_cpu(pgpt_head->partition_entry_array_crc32)) {
-- printf("GUID Partition Table Entry Array CRC is wrong:"
-- "0x%x != 0x%x\n",
-- le32_to_cpu(pgpt_head->partition_entry_array_crc32),
-- calc_crc32);
--
-+ if (validate_gpt_entries(pgpt_head, *pgpt_pte)) {
- free(*pgpt_pte);
- return 0;
- }
-diff -ruN u-boot-2015.01-rc3/doc/README.x86 u-boot/doc/README.x86
---- u-boot-2015.01-rc3/doc/README.x86 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/doc/README.x86 2015-01-01 17:34:32.597497612 +0100
-@@ -0,0 +1,126 @@
-+#
-+# Copyright (C) 2014, Simon Glass <sjg@chromium.org>
-+# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+U-Boot on x86
-+=============
-+
-+This document describes the information about U-Boot running on x86 targets,
-+including supported boards, build instructions, todo list, etc.
-+
-+Status
-+------
-+U-Boot supports running as a coreboot [1] payload on x86. So far only Link
-+(Chromebook Pixel) has been tested, but it should work with minimal adjustments
-+on other x86 boards since coreboot deals with most of the low-level details.
-+
-+U-Boot also supports booting directly from x86 reset vector without coreboot,
-+aka raw support or bare support. Currently Link and Intel Crown Bay board
-+support running U-Boot 'bare metal'.
-+
-+As for loading OS, U-Boot supports directly booting a 32-bit or 64-bit Linux
-+kernel as part of a FIT image. It also supports a compressed zImage.
-+
-+Build Instructions
-+------------------
-+Building U-Boot as a coreboot payload is just like building U-Boot for targets
-+on other architectures, like below:
-+
-+$ make coreboot-x86_defconfig
-+$ make all
-+
-+Building ROM version of U-Boot (hereafter referred to as u-boot.rom) is a
-+little bit tricky, as generally it requires several binary blobs which are not
-+shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is
-+not turned on by default in the U-Boot source tree. Firstly, you need turn it
-+on by uncommenting the following line in the main U-Boot Makefile:
-+
-+# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
-+
-+Link-specific instructions:
-+
-+First, you need the following binary blobs:
-+
-+* descriptor.bin - Intel flash descriptor
-+* me.bin - Intel Management Engine
-+* mrc.bin - Memory Reference Code, which sets up SDRAM
-+* video ROM - sets up the display
-+
-+You can get these binary blobs by:
-+
-+$ git clone http://review.coreboot.org/p/blobs.git
-+$ cd blobs
-+
-+Find the following files:
-+
-+* ./mainboard/google/link/descriptor.bin
-+* ./mainboard/google/link/me.bin
-+* ./northbridge/intel/sandybridge/systemagent-ivybridge.bin
-+
-+The 3rd one should be renamed to mrc.bin.
-+As for the video ROM, you can get it here [2].
-+Make sure all these binary blobs are put in the board directory.
-+
-+Now you can build U-Boot and obtain u-boot.rom:
-+
-+$ make chromebook_link_defconfig
-+$ make all
-+
-+Intel Crown Bay specific instructions:
-+
-+U-Boot support of Intel Crown Bay board [3] relies on a binary blob called
-+Firmware Support Package [4] to perform all the necessary initialization steps
-+as documented in the BIOS Writer Guide, including initialization of the CPU,
-+memory controller, chipset and certain bus interfaces.
-+
-+Download the Intel FSP for Atom E6xx series and Platform Controller Hub EG20T,
-+install it on your host and locate the FSP binary blob. Note this platform
-+also requires a Chipset Micro Code (CMC) state machine binary to be present in
-+the SPI flash where u-boot.rom resides, and this CMC binary blob can be found
-+in this FSP package too.
-+
-+* ./FSP/QUEENSBAY_FSP_GOLD_001_20-DECEMBER-2013.fd
-+* ./Microcode/C0_22211.BIN
-+
-+Rename the first one to fsp.bin and second one to cmc.bin and put them in the
-+board directory.
-+
-+Now you can build U-Boot and obtaim u-boot.rom
-+
-+$ make crownbay_defconfig
-+$ make all
-+
-+CPU Microcode
-+-------------
-+Modern CPU usually requires a special bit stream called microcode [5] to be
-+loaded on the processor after power up in order to function properly. U-Boot
-+has already integrated these as hex dumps in the source tree.
-+
-+Driver Model
-+------------
-+x86 has been converted to use driver model for serial and GPIO.
-+
-+Device Tree
-+-----------
-+x86 uses device tree to configure the board thus requires CONFIG_OF_CONTROL to
-+be turned on. Not every device on the board is configured via devie tree, but
-+more and more devices will be added as time goes by. Check out the directory
-+arch/x86/dts/ for these device tree source files.
-+
-+TODO List
-+---------
-+- MTRR support (for performance)
-+- Audio
-+- Chrome OS verified boot
-+- SMI and ACPI support, to provide platform info and facilities to Linux
-+
-+References
-+----------
-+[1] http://www.coreboot.org
-+[2] http://www.coreboot.org/~stepan/pci8086,0166.rom
-+[3] http://www.intel.com/content/www/us/en/embedded/design-tools/evaluation-platforms/atom-e660-eg20t-development-kit.html
-+[4] http://www.intel.com/fsp
-+[5] http://en.wikipedia.org/wiki/Microcode
-diff -ruN u-boot-2015.01-rc3/drivers/bios_emulator/besys.c u-boot/drivers/bios_emulator/besys.c
---- u-boot-2015.01-rc3/drivers/bios_emulator/besys.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/bios_emulator/besys.c 2015-01-01 17:34:32.605497481 +0100
-@@ -48,8 +48,8 @@
- ****************************************************************************/
-
- #define __io
--#include <asm/io.h>
- #include <common.h>
-+#include <asm/io.h>
- #include "biosemui.h"
-
- /*------------------------- Global Variables ------------------------------*/
-diff -ruN u-boot-2015.01-rc3/drivers/bios_emulator/bios.c u-boot/drivers/bios_emulator/bios.c
---- u-boot-2015.01-rc3/drivers/bios_emulator/bios.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/bios_emulator/bios.c 2015-01-01 17:34:32.605497481 +0100
-@@ -42,8 +42,8 @@
- ****************************************************************************/
-
- #define __io
--#include <asm/io.h>
- #include <common.h>
-+#include <asm/io.h>
- #include "biosemui.h"
-
- /*----------------------------- Implementation ----------------------------*/
-diff -ruN u-boot-2015.01-rc3/drivers/block/dwc_ahsata.c u-boot/drivers/block/dwc_ahsata.c
---- u-boot-2015.01-rc3/drivers/block/dwc_ahsata.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/block/dwc_ahsata.c 2015-01-01 17:34:32.613497350 +0100
-@@ -594,22 +594,24 @@
-
- int reset_sata(int dev)
- {
-- struct ahci_probe_ent *probe_ent =
-- (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
-- struct sata_host_regs *host_mmio =
-- (struct sata_host_regs *)probe_ent->mmio_base;
-+ struct ahci_probe_ent *probe_ent;
-+ struct sata_host_regs *host_mmio;
-
- if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
- printf("The sata index %d is out of ranges\n\r", dev);
- return -1;
- }
-
-+ probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
-+ if (NULL == probe_ent)
-+ /* not initialized, so nothing to reset */
-+ return 0;
-+
-+ host_mmio = (struct sata_host_regs *)probe_ent->mmio_base;
- setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR);
- while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR)
- udelay(100);
-
-- disable_sata_clock();
--
- return 0;
- }
-
-diff -ruN u-boot-2015.01-rc3/drivers/core/device.c u-boot/drivers/core/device.c
---- u-boot-2015.01-rc3/drivers/core/device.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/core/device.c 2015-01-01 17:34:32.621497219 +0100
-@@ -234,7 +234,7 @@
- void *dev_get_platdata(struct udevice *dev)
- {
- if (!dev) {
-- dm_warn("%s: null device", __func__);
-+ dm_warn("%s: null device\n", __func__);
- return NULL;
- }
-
-@@ -244,7 +244,7 @@
- void *dev_get_priv(struct udevice *dev)
- {
- if (!dev) {
-- dm_warn("%s: null device", __func__);
-+ dm_warn("%s: null device\n", __func__);
- return NULL;
- }
-
-@@ -254,7 +254,7 @@
- void *dev_get_parentdata(struct udevice *dev)
- {
- if (!dev) {
-- dm_warn("%s: null device", __func__);
-+ dm_warn("%s: null device\n", __func__);
- return NULL;
- }
-
-diff -ruN u-boot-2015.01-rc3/drivers/crypto/fsl/jr.c u-boot/drivers/crypto/fsl/jr.c
---- u-boot-2015.01-rc3/drivers/crypto/fsl/jr.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/crypto/fsl/jr.c 2015-01-01 17:34:32.621497219 +0100
-@@ -246,7 +246,7 @@
- struct result op;
- int ret = 0;
-
-- memset(&op, sizeof(op), 0);
-+ memset(&op, 0, sizeof(op));
-
- ret = jr_enqueue(desc, desc_done, &op);
- if (ret) {
-diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/arm_ddr_gen3.c u-boot/drivers/ddr/fsl/arm_ddr_gen3.c
---- u-boot-2015.01-rc3/drivers/ddr/fsl/arm_ddr_gen3.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/ddr/fsl/arm_ddr_gen3.c 2015-01-01 17:34:32.621497219 +0100
-@@ -92,7 +92,6 @@
- ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2);
-- ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
-@@ -105,9 +104,6 @@
- ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
- ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-- ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
-- ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
--
- ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4);
- ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5);
- ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
-@@ -128,7 +124,24 @@
- ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
- ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
- ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
-- ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
-+#ifdef CONFIG_DEEP_SLEEP
-+ if (is_warm_boot()) {
-+ ddr_out32(&ddr->sdram_cfg_2,
-+ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
-+ ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
-+ ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
-+
-+ /* DRAM VRef will not be trained */
-+ ddr_out32(&ddr->ddr_cdr2,
-+ regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
-+ } else
-+#endif
-+ {
-+ ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
-+ ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
-+ ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-+ ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
-+ }
- ddr_out32(&ddr->err_disable, regs->err_disable);
- ddr_out32(&ddr->err_int_en, regs->err_int_en);
- for (i = 0; i < 32; i++) {
-@@ -167,8 +180,20 @@
- udelay(500);
- asm volatile("dsb sy;isb");
-
-+#ifdef CONFIG_DEEP_SLEEP
-+ if (is_warm_boot()) {
-+ /* enter self-refresh */
-+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
-+ temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
-+ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
-+ /* do board specific memory setup */
-+ board_mem_sleep_setup();
-+
-+ temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
-+ } else
-+#endif
-+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
- /* Let the controller go */
-- temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
- ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
- asm volatile("dsb sy;isb");
-
-@@ -211,4 +236,12 @@
-
- if (timeout <= 0)
- printf("Waiting for D_INIT timeout. Memory may not work.\n");
-+#ifdef CONFIG_DEEP_SLEEP
-+ if (is_warm_boot()) {
-+ /* exit self-refresh */
-+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
-+ temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
-+ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
-+ }
-+#endif
- }
-diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/ctrl_regs.c u-boot/drivers/ddr/fsl/ctrl_regs.c
---- u-boot-2015.01-rc3/drivers/ddr/fsl/ctrl_regs.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/ddr/fsl/ctrl_regs.c 2015-01-01 17:34:32.625497153 +0100
-@@ -324,6 +324,7 @@
- #elif defined(CONFIG_SYS_FSL_DDR3)
- unsigned int data_rate = get_ddr_freq(0);
- int txp;
-+ unsigned int ip_rev;
- int odt_overlap;
- /*
- * (tXARD and tXARDS). Empirical?
-@@ -336,7 +337,25 @@
- */
- txp = max((int)mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000));
-
-- tmrd_mclk = 4;
-+ ip_rev = fsl_ddr_get_version();
-+ if (ip_rev >= 0x40700) {
-+ /*
-+ * MRS_CYC = max(tMRD, tMOD)
-+ * tMRD = 4nCK (8nCK for RDIMM)
-+ * tMOD = max(12nCK, 15ns)
-+ */
-+ tmrd_mclk = max((unsigned int)12, picos_to_mclk(15000));
-+ } else {
-+ /*
-+ * MRS_CYC = tMRD
-+ * tMRD = 4nCK (8nCK for RDIMM)
-+ */
-+ if (popts->registered_dimm_en)
-+ tmrd_mclk = 8;
-+ else
-+ tmrd_mclk = 4;
-+ }
-+
- /* set the turnaround time */
-
- /*
-diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/fsl_ddr_gen4.c u-boot/drivers/ddr/fsl/fsl_ddr_gen4.c
---- u-boot-2015.01-rc3/drivers/ddr/fsl/fsl_ddr_gen4.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/ddr/fsl/fsl_ddr_gen4.c 2015-01-01 17:34:32.625497153 +0100
-@@ -103,7 +103,6 @@
- ddr_out32(&ddr->dq_map_1, regs->dq_map_1);
- ddr_out32(&ddr->dq_map_2, regs->dq_map_2);
- ddr_out32(&ddr->dq_map_3, regs->dq_map_3);
-- ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- ddr_out32(&ddr->sdram_cfg_3, regs->ddr_sdram_cfg_3);
- ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
-@@ -124,8 +123,6 @@
- ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
- ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
-- ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
-- ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
- ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
- #ifndef CONFIG_SYS_FSL_DDR_EMU
- /*
-@@ -147,7 +144,24 @@
- ddr_out32(&ddr->ddr_sdram_rcw_5, regs->ddr_sdram_rcw_5);
- ddr_out32(&ddr->ddr_sdram_rcw_6, regs->ddr_sdram_rcw_6);
- ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
-- ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
-+#ifdef CONFIG_DEEP_SLEEP
-+ if (is_warm_boot()) {
-+ ddr_out32(&ddr->sdram_cfg_2,
-+ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
-+ ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
-+ ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
-+
-+ /* DRAM VRef will not be trained */
-+ ddr_out32(&ddr->ddr_cdr2,
-+ regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
-+ } else
-+#endif
-+ {
-+ ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
-+ ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
-+ ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-+ ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
-+ }
- ddr_out32(&ddr->err_disable, regs->err_disable);
- ddr_out32(&ddr->err_int_en, regs->err_int_en);
- for (i = 0; i < 32; i++) {
-@@ -187,8 +201,20 @@
- mb();
- isb();
-
-+#ifdef CONFIG_DEEP_SLEEP
-+ if (is_warm_boot()) {
-+ /* enter self-refresh */
-+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
-+ temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
-+ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
-+ /* do board specific memory setup */
-+ board_mem_sleep_setup();
-+
-+ temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
-+ } else
-+#endif
-+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
- /* Let the controller go */
-- temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
- ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
- mb();
- isb();
-@@ -233,4 +259,12 @@
-
- if (timeout <= 0)
- printf("Waiting for D_INIT timeout. Memory may not work.\n");
-+#ifdef CONFIG_DEEP_SLEEP
-+ if (is_warm_boot()) {
-+ /* exit self-refresh */
-+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
-+ temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
-+ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
-+ }
-+#endif
- }
-diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/mpc85xx_ddr_gen3.c u-boot/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
---- u-boot-2015.01-rc3/drivers/ddr/fsl/mpc85xx_ddr_gen3.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/ddr/fsl/mpc85xx_ddr_gen3.c 2015-01-01 17:34:32.625497153 +0100
-@@ -15,8 +15,6 @@
- #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
- #endif
-
--DECLARE_GLOBAL_DATA_PTR;
--
- /*
- * regs has the to-be-set values for DDR controller registers
- * ctrl_num is the DDR controller number
-@@ -44,16 +42,6 @@
- u32 save1, save2;
- #endif
-
--#ifdef CONFIG_DEEP_SLEEP
-- const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-- bool sleep_flag = 0;
--#endif
--
--#ifdef CONFIG_DEEP_SLEEP
-- if (in_be32(&gur->scrtsr[0]) & (1 << 3))
-- sleep_flag = 1;
--#endif
--
- switch (ctrl_num) {
- case 0:
- ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
-@@ -130,13 +118,6 @@
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
--#ifdef CONFIG_DEEP_SLEEP
-- if (sleep_flag)
-- out_be32(&ddr->sdram_cfg_2,
-- regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
-- else
--#endif
-- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
-@@ -149,17 +130,6 @@
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
--#ifdef CONFIG_DEEP_SLEEP
-- if (sleep_flag) {
-- out_be32(&ddr->init_addr, 0);
-- out_be32(&ddr->init_ext_addr, (1 << 31));
-- } else
--#endif
-- {
-- out_be32(&ddr->init_addr, regs->ddr_init_addr);
-- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-- }
--
- out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
- out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
-@@ -180,7 +150,24 @@
- out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
- out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
- out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
-- out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
-+#ifdef CONFIG_DEEP_SLEEP
-+ if (is_warm_boot()) {
-+ out_be32(&ddr->sdram_cfg_2,
-+ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
-+ out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
-+ out_be32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
-+
-+ /* DRAM VRef will not be trained */
-+ out_be32(&ddr->ddr_cdr2,
-+ regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
-+ } else
-+#endif
-+ {
-+ out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
-+ out_be32(&ddr->init_addr, regs->ddr_init_addr);
-+ out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-+ out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
-+ }
- out_be32(&ddr->err_disable, regs->err_disable);
- out_be32(&ddr->err_int_en, regs->err_int_en);
- for (i = 0; i < 32; i++) {
-@@ -400,21 +387,17 @@
- asm volatile("sync;isync");
-
- #ifdef CONFIG_DEEP_SLEEP
-- if (sleep_flag) {
-+ if (is_warm_boot()) {
- /* enter self-refresh */
-- setbits_be32(&ddr->sdram_cfg_2, (1 << 31));
-+ setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
- /* do board specific memory setup */
- board_mem_sleep_setup();
-- }
--#endif
--
-- /* Let the controller go */
--#ifdef CONFIG_DEEP_SLEEP
-- if (sleep_flag)
- temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
-- else
-+ } else
- #endif
- temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI);
-+
-+ /* Let the controller go */
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
- asm volatile("sync;isync");
-
-@@ -566,8 +549,8 @@
- }
- #endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
- #ifdef CONFIG_DEEP_SLEEP
-- if (sleep_flag)
-+ if (is_warm_boot())
- /* exit self-refresh */
-- clrbits_be32(&ddr->sdram_cfg_2, (1 << 31));
-+ clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
- #endif
- }
-diff -ruN u-boot-2015.01-rc3/drivers/dfu/dfu.c u-boot/drivers/dfu/dfu.c
---- u-boot-2015.01-rc3/drivers/dfu/dfu.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/dfu/dfu.c 2015-01-01 17:34:32.629497087 +0100
-@@ -17,7 +17,6 @@
- #include <linux/list.h>
- #include <linux/compiler.h>
-
--static bool dfu_detach_request;
- static LIST_HEAD(dfu_list);
- static int dfu_alt_num;
- static int alt_num_cnt;
-@@ -39,21 +38,6 @@
- return true;
- }
-
--bool dfu_detach(void)
--{
-- return dfu_detach_request;
--}
--
--void dfu_trigger_detach(void)
--{
-- dfu_detach_request = true;
--}
--
--void dfu_clear_detach(void)
--{
-- dfu_detach_request = false;
--}
--
- static int dfu_find_alt_num(const char *s)
- {
- int i = 0;
-@@ -111,8 +95,12 @@
- return dfu_buf;
-
- s = getenv("dfu_bufsiz");
-- dfu_buf_size = s ? (unsigned long)simple_strtol(s, NULL, 16) :
-- CONFIG_SYS_DFU_DATA_BUF_SIZE;
-+ if (s)
-+ dfu_buf_size = (unsigned long)simple_strtol(s, NULL, 0);
-+
-+ if (!s || !dfu_buf_size)
-+ dfu_buf_size = CONFIG_SYS_DFU_DATA_BUF_SIZE;
-+
- if (dfu->max_buf_size && dfu_buf_size > dfu->max_buf_size)
- dfu_buf_size = dfu->max_buf_size;
-
-@@ -544,10 +532,35 @@
- int dfu_get_alt(char *name)
- {
- struct dfu_entity *dfu;
-+ char *str;
-
- list_for_each_entry(dfu, &dfu_list, list) {
-- if (!strncmp(dfu->name, name, strlen(dfu->name)))
-- return dfu->alt;
-+ if (dfu->name[0] != '/') {
-+ if (!strncmp(dfu->name, name, strlen(dfu->name)))
-+ return dfu->alt;
-+ } else {
-+ /*
-+ * One must also consider absolute path
-+ * (/boot/bin/uImage) available at dfu->name when
-+ * compared "plain" file name (uImage)
-+ *
-+ * It is the case for e.g. thor gadget where lthor SW
-+ * sends only the file name, so only the very last part
-+ * of path must be checked for equality
-+ */
-+
-+ str = strstr(dfu->name, name);
-+ if (!str)
-+ continue;
-+
-+ /*
-+ * Check if matching substring is the last element of
-+ * dfu->name (uImage)
-+ */
-+ if (strlen(dfu->name) ==
-+ ((str - dfu->name) + strlen(name)))
-+ return dfu->alt;
-+ }
- }
-
- return -ENODEV;
-diff -ruN u-boot-2015.01-rc3/drivers/dfu/dfu_mmc.c u-boot/drivers/dfu/dfu_mmc.c
---- u-boot-2015.01-rc3/drivers/dfu/dfu_mmc.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/dfu/dfu_mmc.c 2015-01-01 17:34:32.629497087 +0100
-@@ -40,10 +40,16 @@
- static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu,
- u64 offset, void *buf, long *len)
- {
-- struct mmc *mmc = find_mmc_device(dfu->data.mmc.dev_num);
-+ struct mmc *mmc;
- u32 blk_start, blk_count, n = 0;
- int ret, part_num_bkp = 0;
-
-+ mmc = find_mmc_device(dfu->data.mmc.dev_num);
-+ if (!mmc) {
-+ error("Device MMC %d - not found!", dfu->data.mmc.dev_num);
-+ return -ENODEV;
-+ }
-+
- /*
- * We must ensure that we work in lba_blk_size chunks, so ALIGN
- * this value.
-diff -ruN u-boot-2015.01-rc3/drivers/gpio/intel_ich6_gpio.c u-boot/drivers/gpio/intel_ich6_gpio.c
---- u-boot-2015.01-rc3/drivers/gpio/intel_ich6_gpio.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/gpio/intel_ich6_gpio.c 2015-01-01 17:34:32.637496957 +0100
-@@ -34,69 +34,21 @@
- #include <asm/gpio.h>
- #include <asm/io.h>
- #include <asm/pci.h>
--#ifdef CONFIG_X86_RESET_VECTOR
--#include <asm/arch/pch.h>
--#define SUPPORT_GPIO_SETUP
--#endif
-
- #define GPIO_PER_BANK 32
-
--/* Where in config space is the register that points to the GPIO registers? */
--#define PCI_CFG_GPIOBASE 0x48
--
- struct ich6_bank_priv {
- /* These are I/O addresses */
-- uint32_t use_sel;
-- uint32_t io_sel;
-- uint32_t lvl;
-+ uint16_t use_sel;
-+ uint16_t io_sel;
-+ uint16_t lvl;
- };
-
--#ifdef SUPPORT_GPIO_SETUP
--static void setup_pch_gpios(const struct pch_gpio_map *gpio)
--{
-- u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc;
--
-- /* GPIO Set 1 */
-- if (gpio->set1.level)
-- outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
-- if (gpio->set1.mode)
-- outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
-- if (gpio->set1.direction)
-- outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL);
-- if (gpio->set1.reset)
-- outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1);
-- if (gpio->set1.invert)
-- outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV);
-- if (gpio->set1.blink)
-- outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK);
--
-- /* GPIO Set 2 */
-- if (gpio->set2.level)
-- outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
-- if (gpio->set2.mode)
-- outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
-- if (gpio->set2.direction)
-- outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2);
-- if (gpio->set2.reset)
-- outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2);
--
-- /* GPIO Set 3 */
-- if (gpio->set3.level)
-- outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
-- if (gpio->set3.mode)
-- outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
-- if (gpio->set3.direction)
-- outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3);
-- if (gpio->set3.reset)
-- outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3);
--}
--
- /* TODO: Move this to device tree, or platform data */
- void ich_gpio_set_gpio_map(const struct pch_gpio_map *map)
- {
- gd->arch.gpio_map = map;
- }
--#endif /* SUPPORT_GPIO_SETUP */
-
- static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
- {
-@@ -105,7 +57,7 @@
- u8 tmpbyte;
- u16 tmpword;
- u32 tmplong;
-- u32 gpiobase;
-+ u16 gpiobase;
- int offset;
-
- /* Where should it be? */
-@@ -164,11 +116,15 @@
- /*
- * GPIOBASE moved to its current offset with ICH6, but prior to
- * that it was unused (or undocumented). Check that it looks
-- * okay: not all ones or zeros, and mapped to I/O space (bit 0).
-+ * okay: not all ones or zeros.
-+ *
-+ * Note we don't need check bit0 here, because the Tunnel Creek
-+ * GPIO base address register bit0 is reserved (read returns 0),
-+ * while on the Ivybridge the bit0 is used to indicate it is an
-+ * I/O space.
- */
- tmplong = pci_read_config32(pci_dev, PCI_CFG_GPIOBASE);
-- if (tmplong == 0x00000000 || tmplong == 0xffffffff ||
-- !(tmplong & 0x00000001)) {
-+ if (tmplong == 0x00000000 || tmplong == 0xffffffff) {
- debug("%s: unexpected GPIOBASE value\n", __func__);
- return -ENODEV;
- }
-@@ -179,7 +135,7 @@
- * at the offset that we just read. Bit 0 indicates that it's
- * an I/O address, not a memory address, so mask that off.
- */
-- gpiobase = tmplong & 0xfffffffe;
-+ gpiobase = tmplong & 0xfffe;
- offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1);
- if (offset == -1) {
- debug("%s: Invalid register offset %d\n", __func__, offset);
-@@ -198,12 +154,11 @@
- struct gpio_dev_priv *uc_priv = dev->uclass_priv;
- struct ich6_bank_priv *bank = dev_get_priv(dev);
-
--#ifdef SUPPORT_GPIO_SETUP
- if (gd->arch.gpio_map) {
-- setup_pch_gpios(gd->arch.gpio_map);
-+ setup_pch_gpios(plat->base_addr, gd->arch.gpio_map);
- gd->arch.gpio_map = NULL;
- }
--#endif
-+
- uc_priv->gpio_count = GPIO_PER_BANK;
- uc_priv->bank_name = plat->bank_name;
- bank->use_sel = plat->base_addr;
-@@ -251,6 +206,8 @@
- struct ich6_bank_priv *bank = dev_get_priv(dev);
- u32 tmplong;
-
-+ gpio_set_value(offset, value);
-+
- tmplong = inl(bank->io_sel);
- tmplong &= ~(1UL << offset);
- outl(bank->io_sel, tmplong);
-diff -ruN u-boot-2015.01-rc3/drivers/i2c/i2c-emul-uclass.c u-boot/drivers/i2c/i2c-emul-uclass.c
---- u-boot-2015.01-rc3/drivers/i2c/i2c-emul-uclass.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/i2c/i2c-emul-uclass.c 2015-01-01 17:34:32.645496825 +0100
-@@ -0,0 +1,14 @@
-+/*
-+ * Copyright (c) 2014 Google, Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <i2c.h>
-+
-+UCLASS_DRIVER(i2c_emul) = {
-+ .id = UCLASS_I2C_EMUL,
-+ .name = "i2c_emul",
-+};
-diff -ruN u-boot-2015.01-rc3/drivers/i2c/i2c-uclass.c u-boot/drivers/i2c/i2c-uclass.c
---- u-boot-2015.01-rc3/drivers/i2c/i2c-uclass.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/i2c/i2c-uclass.c 2015-01-01 17:34:32.645496825 +0100
-@@ -0,0 +1,466 @@
-+/*
-+ * Copyright (c) 2014 Google, Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <errno.h>
-+#include <fdtdec.h>
-+#include <i2c.h>
-+#include <malloc.h>
-+#include <dm/device-internal.h>
-+#include <dm/lists.h>
-+#include <dm/root.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#define I2C_MAX_OFFSET_LEN 4
-+
-+/**
-+ * i2c_setup_offset() - Set up a new message with a chip offset
-+ *
-+ * @chip: Chip to use
-+ * @offset: Byte offset within chip
-+ * @offset_buf: Place to put byte offset
-+ * @msg: Message buffer
-+ * @return 0 if OK, -EADDRNOTAVAIL if the offset length is 0. In that case the
-+ * message is still set up but will not contain an offset.
-+ */
-+static int i2c_setup_offset(struct dm_i2c_chip *chip, uint offset,
-+ uint8_t offset_buf[], struct i2c_msg *msg)
-+{
-+ int offset_len;
-+
-+ msg->addr = chip->chip_addr;
-+ msg->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
-+ msg->len = chip->offset_len;
-+ msg->buf = offset_buf;
-+ if (!chip->offset_len)
-+ return -EADDRNOTAVAIL;
-+ assert(chip->offset_len <= I2C_MAX_OFFSET_LEN);
-+ offset_len = chip->offset_len;
-+ while (offset_len--)
-+ *offset_buf++ = offset >> (8 * offset_len);
-+
-+ return 0;
-+}
-+
-+static int i2c_read_bytewise(struct udevice *dev, uint offset,
-+ uint8_t *buffer, int len)
-+{
-+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
-+ struct udevice *bus = dev_get_parent(dev);
-+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
-+ struct i2c_msg msg[2], *ptr;
-+ uint8_t offset_buf[I2C_MAX_OFFSET_LEN];
-+ int ret;
-+ int i;
-+
-+ for (i = 0; i < len; i++) {
-+ if (i2c_setup_offset(chip, offset + i, offset_buf, msg))
-+ return -EINVAL;
-+ ptr = msg + 1;
-+ ptr->addr = chip->chip_addr;
-+ ptr->flags = msg->flags | I2C_M_RD;
-+ ptr->len = 1;
-+ ptr->buf = &buffer[i];
-+ ptr++;
-+
-+ ret = ops->xfer(bus, msg, ptr - msg);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int i2c_write_bytewise(struct udevice *dev, uint offset,
-+ const uint8_t *buffer, int len)
-+{
-+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
-+ struct udevice *bus = dev_get_parent(dev);
-+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
-+ struct i2c_msg msg[1];
-+ uint8_t buf[I2C_MAX_OFFSET_LEN + 1];
-+ int ret;
-+ int i;
-+
-+ for (i = 0; i < len; i++) {
-+ if (i2c_setup_offset(chip, offset + i, buf, msg))
-+ return -EINVAL;
-+ buf[msg->len++] = buffer[i];
-+
-+ ret = ops->xfer(bus, msg, 1);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len)
-+{
-+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
-+ struct udevice *bus = dev_get_parent(dev);
-+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
-+ struct i2c_msg msg[2], *ptr;
-+ uint8_t offset_buf[I2C_MAX_OFFSET_LEN];
-+ int msg_count;
-+
-+ if (!ops->xfer)
-+ return -ENOSYS;
-+ if (chip->flags & DM_I2C_CHIP_RD_ADDRESS)
-+ return i2c_read_bytewise(dev, offset, buffer, len);
-+ ptr = msg;
-+ if (!i2c_setup_offset(chip, offset, offset_buf, ptr))
-+ ptr++;
-+
-+ if (len) {
-+ ptr->addr = chip->chip_addr;
-+ ptr->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
-+ ptr->flags |= I2C_M_RD;
-+ ptr->len = len;
-+ ptr->buf = buffer;
-+ ptr++;
-+ }
-+ msg_count = ptr - msg;
-+
-+ return ops->xfer(bus, msg, msg_count);
-+}
-+
-+int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, int len)
-+{
-+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
-+ struct udevice *bus = dev_get_parent(dev);
-+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
-+ struct i2c_msg msg[1];
-+
-+ if (!ops->xfer)
-+ return -ENOSYS;
-+
-+ if (chip->flags & DM_I2C_CHIP_WR_ADDRESS)
-+ return i2c_write_bytewise(dev, offset, buffer, len);
-+ /*
-+ * The simple approach would be to send two messages here: one to
-+ * set the offset and one to write the bytes. However some drivers
-+ * will not be expecting this, and some chips won't like how the
-+ * driver presents this on the I2C bus.
-+ *
-+ * The API does not support separate offset and data. We could extend
-+ * it with a flag indicating that there is data in the next message
-+ * that needs to be processed in the same transaction. We could
-+ * instead add an additional buffer to each message. For now, handle
-+ * this in the uclass since it isn't clear what the impact on drivers
-+ * would be with this extra complication. Unfortunately this means
-+ * copying the message.
-+ *
-+ * Use the stack for small messages, malloc() for larger ones. We
-+ * need to allow space for the offset (up to 4 bytes) and the message
-+ * itself.
-+ */
-+ if (len < 64) {
-+ uint8_t buf[I2C_MAX_OFFSET_LEN + len];
-+
-+ i2c_setup_offset(chip, offset, buf, msg);
-+ msg->len += len;
-+ memcpy(buf + chip->offset_len, buffer, len);
-+
-+ return ops->xfer(bus, msg, 1);
-+ } else {
-+ uint8_t *buf;
-+ int ret;
-+
-+ buf = malloc(I2C_MAX_OFFSET_LEN + len);
-+ if (!buf)
-+ return -ENOMEM;
-+ i2c_setup_offset(chip, offset, buf, msg);
-+ msg->len += len;
-+ memcpy(buf + chip->offset_len, buffer, len);
-+
-+ ret = ops->xfer(bus, msg, 1);
-+ free(buf);
-+ return ret;
-+ }
-+}
-+
-+/**
-+ * i2c_probe_chip() - probe for a chip on a bus
-+ *
-+ * @bus: Bus to probe
-+ * @chip_addr: Chip address to probe
-+ * @flags: Flags for the chip
-+ * @return 0 if found, -ENOSYS if the driver is invalid, -EREMOTEIO if the chip
-+ * does not respond to probe
-+ */
-+static int i2c_probe_chip(struct udevice *bus, uint chip_addr,
-+ enum dm_i2c_chip_flags chip_flags)
-+{
-+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
-+ struct i2c_msg msg[1];
-+ int ret;
-+
-+ if (ops->probe_chip) {
-+ ret = ops->probe_chip(bus, chip_addr, chip_flags);
-+ if (!ret || ret != -ENOSYS)
-+ return ret;
-+ }
-+
-+ if (!ops->xfer)
-+ return -ENOSYS;
-+
-+ /* Probe with a zero-length message */
-+ msg->addr = chip_addr;
-+ msg->flags = chip_flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
-+ msg->len = 0;
-+ msg->buf = NULL;
-+
-+ return ops->xfer(bus, msg, 1);
-+}
-+
-+static int i2c_bind_driver(struct udevice *bus, uint chip_addr,
-+ struct udevice **devp)
-+{
-+ struct dm_i2c_chip chip;
-+ char name[30], *str;
-+ struct udevice *dev;
-+ int ret;
-+
-+ snprintf(name, sizeof(name), "generic_%x", chip_addr);
-+ str = strdup(name);
-+ ret = device_bind_driver(bus, "i2c_generic_chip_drv", str, &dev);
-+ debug("%s: device_bind_driver: ret=%d\n", __func__, ret);
-+ if (ret)
-+ goto err_bind;
-+
-+ /* Tell the device what we know about it */
-+ memset(&chip, '\0', sizeof(chip));
-+ chip.chip_addr = chip_addr;
-+ chip.offset_len = 1; /* we assume */
-+ ret = device_probe_child(dev, &chip);
-+ debug("%s: device_probe_child: ret=%d\n", __func__, ret);
-+ if (ret)
-+ goto err_probe;
-+
-+ *devp = dev;
-+ return 0;
-+
-+err_probe:
-+ device_unbind(dev);
-+err_bind:
-+ free(str);
-+ return ret;
-+}
-+
-+int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp)
-+{
-+ struct udevice *dev;
-+
-+ debug("%s: Searching bus '%s' for address %02x: ", __func__,
-+ bus->name, chip_addr);
-+ for (device_find_first_child(bus, &dev); dev;
-+ device_find_next_child(&dev)) {
-+ struct dm_i2c_chip store;
-+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
-+ int ret;
-+
-+ if (!chip) {
-+ chip = &store;
-+ i2c_chip_ofdata_to_platdata(gd->fdt_blob,
-+ dev->of_offset, chip);
-+ }
-+ if (chip->chip_addr == chip_addr) {
-+ ret = device_probe(dev);
-+ debug("found, ret=%d\n", ret);
-+ if (ret)
-+ return ret;
-+ *devp = dev;
-+ return 0;
-+ }
-+ }
-+ debug("not found\n");
-+ return i2c_bind_driver(bus, chip_addr, devp);
-+}
-+
-+int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp)
-+{
-+ struct udevice *bus;
-+ int ret;
-+
-+ ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus);
-+ if (ret) {
-+ debug("Cannot find I2C bus %d\n", busnum);
-+ return ret;
-+ }
-+ ret = i2c_get_chip(bus, chip_addr, devp);
-+ if (ret) {
-+ debug("Cannot find I2C chip %02x on bus %d\n", chip_addr,
-+ busnum);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
-+ struct udevice **devp)
-+{
-+ int ret;
-+
-+ *devp = NULL;
-+
-+ /* First probe that chip */
-+ ret = i2c_probe_chip(bus, chip_addr, chip_flags);
-+ debug("%s: bus='%s', address %02x, ret=%d\n", __func__, bus->name,
-+ chip_addr, ret);
-+ if (ret)
-+ return ret;
-+
-+ /* The chip was found, see if we have a driver, and probe it */
-+ ret = i2c_get_chip(bus, chip_addr, devp);
-+ debug("%s: i2c_get_chip: ret=%d\n", __func__, ret);
-+
-+ return ret;
-+}
-+
-+int i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
-+{
-+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
-+ struct dm_i2c_bus *i2c = bus->uclass_priv;
-+ int ret;
-+
-+ /*
-+ * If we have a method, call it. If not then the driver probably wants
-+ * to deal with speed changes on the next transfer. It can easily read
-+ * the current speed from this uclass
-+ */
-+ if (ops->set_bus_speed) {
-+ ret = ops->set_bus_speed(bus, speed);
-+ if (ret)
-+ return ret;
-+ }
-+ i2c->speed_hz = speed;
-+
-+ return 0;
-+}
-+
-+/*
-+ * i2c_get_bus_speed:
-+ *
-+ * Returns speed of selected I2C bus in Hz
-+ */
-+int i2c_get_bus_speed(struct udevice *bus)
-+{
-+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
-+ struct dm_i2c_bus *i2c = bus->uclass_priv;
-+
-+ if (!ops->get_bus_speed)
-+ return i2c->speed_hz;
-+
-+ return ops->get_bus_speed(bus);
-+}
-+
-+int i2c_set_chip_flags(struct udevice *dev, uint flags)
-+{
-+ struct udevice *bus = dev->parent;
-+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
-+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
-+ int ret;
-+
-+ if (ops->set_flags) {
-+ ret = ops->set_flags(dev, flags);
-+ if (ret)
-+ return ret;
-+ }
-+ chip->flags = flags;
-+
-+ return 0;
-+}
-+
-+int i2c_get_chip_flags(struct udevice *dev, uint *flagsp)
-+{
-+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
-+
-+ *flagsp = chip->flags;
-+
-+ return 0;
-+}
-+
-+int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len)
-+{
-+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
-+
-+ if (offset_len > I2C_MAX_OFFSET_LEN)
-+ return -EINVAL;
-+ chip->offset_len = offset_len;
-+
-+ return 0;
-+}
-+
-+int i2c_deblock(struct udevice *bus)
-+{
-+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
-+
-+ /*
-+ * We could implement a software deblocking here if we could get
-+ * access to the GPIOs used by I2C, and switch them to GPIO mode
-+ * and then back to I2C. This is somewhat beyond our powers in
-+ * driver model at present, so for now just fail.
-+ *
-+ * See https://patchwork.ozlabs.org/patch/399040/
-+ */
-+ if (!ops->deblock)
-+ return -ENOSYS;
-+
-+ return ops->deblock(bus);
-+}
-+
-+int i2c_chip_ofdata_to_platdata(const void *blob, int node,
-+ struct dm_i2c_chip *chip)
-+{
-+ chip->offset_len = 1; /* default */
-+ chip->flags = 0;
-+ chip->chip_addr = fdtdec_get_int(gd->fdt_blob, node, "reg", -1);
-+ if (chip->chip_addr == -1) {
-+ debug("%s: I2C Node '%s' has no 'reg' property\n", __func__,
-+ fdt_get_name(blob, node, NULL));
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int i2c_post_probe(struct udevice *dev)
-+{
-+ struct dm_i2c_bus *i2c = dev->uclass_priv;
-+
-+ i2c->speed_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
-+ "clock-frequency", 100000);
-+
-+ return i2c_set_bus_speed(dev, i2c->speed_hz);
-+}
-+
-+int i2c_post_bind(struct udevice *dev)
-+{
-+ /* Scan the bus for devices */
-+ return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
-+}
-+
-+UCLASS_DRIVER(i2c) = {
-+ .id = UCLASS_I2C,
-+ .name = "i2c",
-+ .per_device_auto_alloc_size = sizeof(struct dm_i2c_bus),
-+ .post_bind = i2c_post_bind,
-+ .post_probe = i2c_post_probe,
-+};
-+
-+UCLASS_DRIVER(i2c_generic) = {
-+ .id = UCLASS_I2C_GENERIC,
-+ .name = "i2c_generic",
-+};
-+
-+U_BOOT_DRIVER(i2c_generic_chip_drv) = {
-+ .name = "i2c_generic_chip_drv",
-+ .id = UCLASS_I2C_GENERIC,
-+};
-diff -ruN u-boot-2015.01-rc3/drivers/i2c/Makefile u-boot/drivers/i2c/Makefile
---- u-boot-2015.01-rc3/drivers/i2c/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/i2c/Makefile 2015-01-01 17:34:32.641496891 +0100
-@@ -4,6 +4,7 @@
- #
- # SPDX-License-Identifier: GPL-2.0+
- #
-+obj-$(CONFIG_DM_I2C) += i2c-uclass.o
-
- obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o
- obj-$(CONFIG_I2C_MV) += mv_i2c.o
-@@ -26,6 +27,7 @@
- obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
- obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
- obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o
-+obj-$(CONFIG_SYS_I2C_SANDBOX) += sandbox_i2c.o i2c-emul-uclass.o
- obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
- obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
- obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
-diff -ruN u-boot-2015.01-rc3/drivers/i2c/sandbox_i2c.c u-boot/drivers/i2c/sandbox_i2c.c
---- u-boot-2015.01-rc3/drivers/i2c/sandbox_i2c.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/i2c/sandbox_i2c.c 2015-01-01 17:34:32.649496760 +0100
-@@ -0,0 +1,111 @@
-+/*
-+ * Simulate an I2C port
-+ *
-+ * Copyright (c) 2014 Google, Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <errno.h>
-+#include <fdtdec.h>
-+#include <i2c.h>
-+#include <asm/test.h>
-+#include <dm/lists.h>
-+#include <dm/device-internal.h>
-+#include <dm/root.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+struct dm_sandbox_i2c_emul_priv {
-+ struct udevice *emul;
-+};
-+
-+static int get_emul(struct udevice *dev, struct udevice **devp,
-+ struct dm_i2c_ops **opsp)
-+{
-+ struct dm_i2c_chip *priv;
-+ int ret;
-+
-+ *devp = NULL;
-+ *opsp = NULL;
-+ priv = dev_get_parentdata(dev);
-+ if (!priv->emul) {
-+ ret = dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset,
-+ false);
-+ if (ret)
-+ return ret;
-+
-+ ret = device_get_child(dev, 0, &priv->emul);
-+ if (ret)
-+ return ret;
-+ }
-+ *devp = priv->emul;
-+ *opsp = i2c_get_ops(priv->emul);
-+
-+ return 0;
-+}
-+
-+static int sandbox_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
-+ int nmsgs)
-+{
-+ struct dm_i2c_bus *i2c = bus->uclass_priv;
-+ struct dm_i2c_ops *ops;
-+ struct udevice *emul, *dev;
-+ bool is_read;
-+ int ret;
-+
-+ /* Special test code to return success but with no emulation */
-+ if (msg->addr == SANDBOX_I2C_TEST_ADDR)
-+ return 0;
-+
-+ ret = i2c_get_chip(bus, msg->addr, &dev);
-+ if (ret)
-+ return ret;
-+
-+ ret = get_emul(dev, &emul, &ops);
-+ if (ret)
-+ return ret;
-+
-+ /*
-+ * For testing, don't allow writing above 100KHz for writes and
-+ * 400KHz for reads
-+ */
-+ is_read = nmsgs > 1;
-+ if (i2c->speed_hz > (is_read ? 400000 : 100000))
-+ return -EINVAL;
-+ return ops->xfer(emul, msg, nmsgs);
-+}
-+
-+static const struct dm_i2c_ops sandbox_i2c_ops = {
-+ .xfer = sandbox_i2c_xfer,
-+};
-+
-+static int sandbox_i2c_child_pre_probe(struct udevice *dev)
-+{
-+ struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev);
-+
-+ /* Ignore our test address */
-+ if (i2c_chip->chip_addr == SANDBOX_I2C_TEST_ADDR)
-+ return 0;
-+ if (dev->of_offset == -1)
-+ return 0;
-+
-+ return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset,
-+ i2c_chip);
-+}
-+
-+static const struct udevice_id sandbox_i2c_ids[] = {
-+ { .compatible = "sandbox,i2c" },
-+ { }
-+};
-+
-+U_BOOT_DRIVER(i2c_sandbox) = {
-+ .name = "i2c_sandbox",
-+ .id = UCLASS_I2C,
-+ .of_match = sandbox_i2c_ids,
-+ .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
-+ .child_pre_probe = sandbox_i2c_child_pre_probe,
-+ .ops = &sandbox_i2c_ops,
-+};
-diff -ruN u-boot-2015.01-rc3/drivers/i2c/tegra_i2c.c u-boot/drivers/i2c/tegra_i2c.c
---- u-boot-2015.01-rc3/drivers/i2c/tegra_i2c.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/i2c/tegra_i2c.c 2015-01-01 17:34:32.649496760 +0100
-@@ -7,6 +7,8 @@
- */
-
- #include <common.h>
-+#include <dm.h>
-+#include <errno.h>
- #include <fdtdec.h>
- #include <i2c.h>
- #include <asm/io.h>
-@@ -19,6 +21,12 @@
-
- DECLARE_GLOBAL_DATA_PTR;
-
-+enum i2c_type {
-+ TYPE_114,
-+ TYPE_STD,
-+ TYPE_DVC,
-+};
-+
- /* Information about i2c controller */
- struct i2c_bus {
- int id;
-@@ -27,20 +35,17 @@
- int pinmux_config;
- struct i2c_control *control;
- struct i2c_ctlr *regs;
-- int is_dvc; /* DVC type, rather than I2C */
-- int is_scs; /* single clock source (T114+) */
-+ enum i2c_type type;
- int inited; /* bus is inited */
- };
-
--static struct i2c_bus i2c_controllers[TEGRA_I2C_NUM_CONTROLLERS];
--
- static void set_packet_mode(struct i2c_bus *i2c_bus)
- {
- u32 config;
-
- config = I2C_CNFG_NEW_MASTER_FSM_MASK | I2C_CNFG_PACKET_MODE_MASK;
-
-- if (i2c_bus->is_dvc) {
-+ if (i2c_bus->type == TYPE_DVC) {
- struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
-
- writel(config, &dvc->cnfg);
-@@ -65,6 +70,9 @@
-
- static void i2c_init_controller(struct i2c_bus *i2c_bus)
- {
-+ if (!i2c_bus->speed)
-+ return;
-+ debug("%s: speed=%d\n", __func__, i2c_bus->speed);
- /*
- * Use PLLP - DP-04508-001_v06 datasheet indicates a divisor of 8
- * here, in section 23.3.1, but in fact we seem to need a factor of
-@@ -73,7 +81,7 @@
- clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
- i2c_bus->speed * 2 * 8);
-
-- if (i2c_bus->is_scs) {
-+ if (i2c_bus->type == TYPE_114) {
- /*
- * T114 I2C went to a single clock source for standard/fast and
- * HS clock speeds. The new clock rate setting calculation is:
-@@ -98,7 +106,7 @@
- i2c_reset_controller(i2c_bus);
-
- /* Configure I2C controller. */
-- if (i2c_bus->is_dvc) { /* only for DVC I2C */
-+ if (i2c_bus->type == TYPE_DVC) { /* only for DVC I2C */
- struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
-
- setbits_le32(&dvc->ctrl3, DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK);
-@@ -272,7 +280,7 @@
- return error;
- }
-
--static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
-+static int tegra_i2c_write_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
- u32 len, bool end_with_repeated_start)
- {
- int error;
-@@ -286,14 +294,14 @@
- trans_info.num_bytes = len;
- trans_info.is_10bit_address = 0;
-
-- error = send_recv_packets(bus, &trans_info);
-+ error = send_recv_packets(i2c_bus, &trans_info);
- if (error)
- debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
-
- return error;
- }
-
--static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
-+static int tegra_i2c_read_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
- u32 len)
- {
- int error;
-@@ -305,52 +313,32 @@
- trans_info.num_bytes = len;
- trans_info.is_10bit_address = 0;
-
-- error = send_recv_packets(bus, &trans_info);
-+ error = send_recv_packets(i2c_bus, &trans_info);
- if (error)
- debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
-
- return error;
- }
-
--#ifndef CONFIG_OF_CONTROL
--#error "Please enable device tree support to use this driver"
--#endif
--
--/**
-- * Check that a bus number is valid and return a pointer to it
-- *
-- * @param bus_num Bus number to check / return
-- * @return pointer to bus, if valid, else NULL
-- */
--static struct i2c_bus *tegra_i2c_get_bus(struct i2c_adapter *adap)
-+static int tegra_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
- {
-- struct i2c_bus *bus;
-+ struct i2c_bus *i2c_bus = dev_get_priv(dev);
-
-- bus = &i2c_controllers[adap->hwadapnr];
-- if (!bus->inited) {
-- debug("%s: Bus %u not available\n", __func__, adap->hwadapnr);
-- return NULL;
-- }
--
-- return bus;
--}
--
--static unsigned int tegra_i2c_set_bus_speed(struct i2c_adapter *adap,
-- unsigned int speed)
--{
-- struct i2c_bus *bus;
--
-- bus = tegra_i2c_get_bus(adap);
-- if (!bus)
-- return 0;
-- bus->speed = speed;
-- i2c_init_controller(bus);
-+ i2c_bus->speed = speed;
-+ i2c_init_controller(i2c_bus);
-
- return 0;
- }
-
--static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
-+static int tegra_i2c_probe(struct udevice *dev)
- {
-+ struct i2c_bus *i2c_bus = dev_get_priv(dev);
-+ const void *blob = gd->fdt_blob;
-+ int node = dev->of_offset;
-+ bool is_dvc;
-+
-+ i2c_bus->id = dev->seq;
-+ i2c_bus->type = dev_get_of_data(dev);
- i2c_bus->regs = (struct i2c_ctlr *)fdtdec_get_addr(blob, node, "reg");
-
- /*
-@@ -358,7 +346,6 @@
- * far no one needs anything other than the default.
- */
- i2c_bus->pinmux_config = FUNCMUX_DEFAULT;
-- i2c_bus->speed = fdtdec_get_int(blob, node, "clock-frequency", 0);
- i2c_bus->periph_id = clock_decode_periph_id(blob, node);
-
- /*
-@@ -371,107 +358,25 @@
- * i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA;
- */
- if (i2c_bus->periph_id == -1)
-- return -FDT_ERR_NOTFOUND;
-+ return -EINVAL;
-
-- return 0;
--}
--
--/*
-- * Process a list of nodes, adding them to our list of I2C ports.
-- *
-- * @param blob fdt blob
-- * @param node_list list of nodes to process (any <=0 are ignored)
-- * @param count number of nodes to process
-- * @param is_dvc 1 if these are DVC ports, 0 if standard I2C
-- * @param is_scs 1 if this HW uses a single clock source (T114+)
-- * @return 0 if ok, -1 on error
-- */
--static int process_nodes(const void *blob, int node_list[], int count,
-- int is_dvc, int is_scs)
--{
-- struct i2c_bus *i2c_bus;
-- int i;
--
-- /* build the i2c_controllers[] for each controller */
-- for (i = 0; i < count; i++) {
-- int node = node_list[i];
--
-- if (node <= 0)
-- continue;
--
-- i2c_bus = &i2c_controllers[i];
-- i2c_bus->id = i;
--
-- if (i2c_get_config(blob, node, i2c_bus)) {
-- printf("i2c_init_board: failed to decode bus %d\n", i);
-- return -1;
-- }
--
-- i2c_bus->is_scs = is_scs;
--
-- i2c_bus->is_dvc = is_dvc;
-- if (is_dvc) {
-- i2c_bus->control =
-- &((struct dvc_ctlr *)i2c_bus->regs)->control;
-- } else {
-- i2c_bus->control = &i2c_bus->regs->control;
-- }
-- debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
-- is_dvc ? "dvc" : "i2c", i, i2c_bus->regs,
-- i2c_bus->periph_id, i2c_bus->speed);
-- i2c_init_controller(i2c_bus);
-- debug("ok\n");
-- i2c_bus->inited = 1;
--
-- /* Mark position as used */
-- node_list[i] = -1;
-+ is_dvc = dev_get_of_data(dev) == TYPE_DVC;
-+ if (is_dvc) {
-+ i2c_bus->control =
-+ &((struct dvc_ctlr *)i2c_bus->regs)->control;
-+ } else {
-+ i2c_bus->control = &i2c_bus->regs->control;
- }
-+ i2c_init_controller(i2c_bus);
-+ debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
-+ is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs,
-+ i2c_bus->periph_id, i2c_bus->speed);
-
- return 0;
- }
-
--/* Sadly there is no error return from this function */
--void i2c_init_board(void)
--{
-- int node_list[TEGRA_I2C_NUM_CONTROLLERS];
-- const void *blob = gd->fdt_blob;
-- int count;
--
-- /* First check for newer (T114+) I2C ports */
-- count = fdtdec_find_aliases_for_id(blob, "i2c",
-- COMPAT_NVIDIA_TEGRA114_I2C, node_list,
-- TEGRA_I2C_NUM_CONTROLLERS);
-- if (process_nodes(blob, node_list, count, 0, 1))
-- return;
--
-- /* Now get the older (T20/T30) normal I2C ports */
-- count = fdtdec_find_aliases_for_id(blob, "i2c",
-- COMPAT_NVIDIA_TEGRA20_I2C, node_list,
-- TEGRA_I2C_NUM_CONTROLLERS);
-- if (process_nodes(blob, node_list, count, 0, 0))
-- return;
--
-- /* Now look for dvc ports */
-- count = fdtdec_add_aliases_for_id(blob, "i2c",
-- COMPAT_NVIDIA_TEGRA20_DVC, node_list,
-- TEGRA_I2C_NUM_CONTROLLERS);
-- if (process_nodes(blob, node_list, count, 1, 0))
-- return;
--}
--
--static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
--{
-- /* No i2c support prior to relocation */
-- if (!(gd->flags & GD_FLG_RELOC))
-- return;
--
-- /* This will override the speed selected in the fdt for that port */
-- debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr);
-- i2c_set_bus_speed(speed);
--}
--
- /* i2c write version without the register address */
--static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
-+static int i2c_write_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
- int len, bool end_with_repeated_start)
- {
- int rc;
-@@ -484,7 +389,7 @@
- debug("\n");
-
- /* Shift 7-bit address over for lower-level i2c functions */
-- rc = tegra_i2c_write_data(bus, chip << 1, buffer, len,
-+ rc = tegra_i2c_write_data(i2c_bus, chip << 1, buffer, len,
- end_with_repeated_start);
- if (rc)
- debug("i2c_write_data(): rc=%d\n", rc);
-@@ -493,14 +398,14 @@
- }
-
- /* i2c read version without the register address */
--static int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
-- int len)
-+static int i2c_read_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
-+ int len)
- {
- int rc;
-
- debug("inside i2c_read_data():\n");
- /* Shift 7-bit address over for lower-level i2c functions */
-- rc = tegra_i2c_read_data(bus, chip << 1, buffer, len);
-+ rc = tegra_i2c_read_data(i2c_bus, chip << 1, buffer, len);
- if (rc) {
- debug("i2c_read_data(): rc=%d\n", rc);
- return rc;
-@@ -516,132 +421,99 @@
- }
-
- /* Probe to see if a chip is present. */
--static int tegra_i2c_probe(struct i2c_adapter *adap, uchar chip)
-+static int tegra_i2c_probe_chip(struct udevice *bus, uint chip_addr,
-+ uint chip_flags)
- {
-- struct i2c_bus *bus;
-+ struct i2c_bus *i2c_bus = dev_get_priv(bus);
- int rc;
-- uchar reg;
-+ u8 reg;
-
-- debug("i2c_probe: addr=0x%x\n", chip);
-- bus = tegra_i2c_get_bus(adap);
-- if (!bus)
-- return 1;
-- reg = 0;
-- rc = i2c_write_data(bus, chip, ®, 1, false);
-- if (rc) {
-- debug("Error probing 0x%x.\n", chip);
-- return 1;
-- }
-- return 0;
-+ /* Shift 7-bit address over for lower-level i2c functions */
-+ rc = tegra_i2c_write_data(i2c_bus, chip_addr << 1, ®, sizeof(reg),
-+ false);
-+
-+ return rc;
- }
-
--static int i2c_addr_ok(const uint addr, const int alen)
-+static int tegra_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
-+ int nmsgs)
- {
-- /* We support 7 or 10 bit addresses, so one or two bytes each */
-- return alen == 1 || alen == 2;
--}
-+ struct i2c_bus *i2c_bus = dev_get_priv(bus);
-+ int ret;
-
--/* Read bytes */
--static int tegra_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
-- int alen, uchar *buffer, int len)
--{
-- struct i2c_bus *bus;
-- uint offset;
-- int i;
--
-- debug("i2c_read: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n",
-- chip, addr, alen, len);
-- bus = tegra_i2c_get_bus(adap);
-- if (!bus)
-- return 1;
-- if (!i2c_addr_ok(addr, alen)) {
-- debug("i2c_read: Bad address %x.%d.\n", addr, alen);
-- return 1;
-- }
-- for (offset = 0; offset < len; offset++) {
-- if (alen) {
-- uchar data[alen];
-- for (i = 0; i < alen; i++) {
-- data[alen - i - 1] =
-- (addr + offset) >> (8 * i);
-- }
-- if (i2c_write_data(bus, chip, data, alen, true)) {
-- debug("i2c_read: error sending (0x%x)\n",
-- addr);
-- return 1;
-- }
-+ debug("i2c_xfer: %d messages\n", nmsgs);
-+ for (; nmsgs > 0; nmsgs--, msg++) {
-+ bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
-+
-+ debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
-+ if (msg->flags & I2C_M_RD) {
-+ ret = i2c_read_data(i2c_bus, msg->addr, msg->buf,
-+ msg->len);
-+ } else {
-+ ret = i2c_write_data(i2c_bus, msg->addr, msg->buf,
-+ msg->len, next_is_read);
- }
-- if (i2c_read_data(bus, chip, buffer + offset, 1)) {
-- debug("i2c_read: error reading (0x%x)\n", addr);
-- return 1;
-+ if (ret) {
-+ debug("i2c_write: error sending\n");
-+ return -EREMOTEIO;
- }
- }
-
- return 0;
- }
-
--/* Write bytes */
--static int tegra_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
-- int alen, uchar *buffer, int len)
--{
-- struct i2c_bus *bus;
-- uint offset;
-- int i;
--
-- debug("i2c_write: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n",
-- chip, addr, alen, len);
-- bus = tegra_i2c_get_bus(adap);
-- if (!bus)
-- return 1;
-- if (!i2c_addr_ok(addr, alen)) {
-- debug("i2c_write: Bad address %x.%d.\n", addr, alen);
-- return 1;
-- }
-- for (offset = 0; offset < len; offset++) {
-- uchar data[alen + 1];
-- for (i = 0; i < alen; i++)
-- data[alen - i - 1] = (addr + offset) >> (8 * i);
-- data[alen] = buffer[offset];
-- if (i2c_write_data(bus, chip, data, alen + 1, false)) {
-- debug("i2c_write: error sending (0x%x)\n", addr);
-- return 1;
-+int tegra_i2c_get_dvc_bus(struct udevice **busp)
-+{
-+ struct udevice *bus;
-+
-+ for (uclass_first_device(UCLASS_I2C, &bus);
-+ bus;
-+ uclass_next_device(&bus)) {
-+ if (dev_get_of_data(bus) == TYPE_DVC) {
-+ *busp = bus;
-+ return 0;
- }
- }
-
-- return 0;
-+ return -ENODEV;
- }
-
--int tegra_i2c_get_dvc_bus_num(void)
--{
-- int i;
-+static const struct dm_i2c_ops tegra_i2c_ops = {
-+ .xfer = tegra_i2c_xfer,
-+ .probe_chip = tegra_i2c_probe_chip,
-+ .set_bus_speed = tegra_i2c_set_bus_speed,
-+};
-
-- for (i = 0; i < TEGRA_I2C_NUM_CONTROLLERS; i++) {
-- struct i2c_bus *bus = &i2c_controllers[i];
-+static int tegra_i2c_child_pre_probe(struct udevice *dev)
-+{
-+ struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev);
-
-- if (bus->inited && bus->is_dvc)
-- return i;
-- }
-+ if (dev->of_offset == -1)
-+ return 0;
-+ return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset,
-+ i2c_chip);
-+}
-
-- return -1;
-+static int tegra_i2c_ofdata_to_platdata(struct udevice *dev)
-+{
-+ return 0;
- }
-
--/*
-- * Register soft i2c adapters
-- */
--U_BOOT_I2C_ADAP_COMPLETE(tegra0, tegra_i2c_init, tegra_i2c_probe,
-- tegra_i2c_read, tegra_i2c_write,
-- tegra_i2c_set_bus_speed, 100000, 0, 0)
--U_BOOT_I2C_ADAP_COMPLETE(tegra1, tegra_i2c_init, tegra_i2c_probe,
-- tegra_i2c_read, tegra_i2c_write,
-- tegra_i2c_set_bus_speed, 100000, 0, 1)
--U_BOOT_I2C_ADAP_COMPLETE(tegra2, tegra_i2c_init, tegra_i2c_probe,
-- tegra_i2c_read, tegra_i2c_write,
-- tegra_i2c_set_bus_speed, 100000, 0, 2)
--U_BOOT_I2C_ADAP_COMPLETE(tegra3, tegra_i2c_init, tegra_i2c_probe,
-- tegra_i2c_read, tegra_i2c_write,
-- tegra_i2c_set_bus_speed, 100000, 0, 3)
--#if TEGRA_I2C_NUM_CONTROLLERS > 4
--U_BOOT_I2C_ADAP_COMPLETE(tegra4, tegra_i2c_init, tegra_i2c_probe,
-- tegra_i2c_read, tegra_i2c_write,
-- tegra_i2c_set_bus_speed, 100000, 0, 4)
--#endif
-+static const struct udevice_id tegra_i2c_ids[] = {
-+ { .compatible = "nvidia,tegra114-i2c", .data = TYPE_114 },
-+ { .compatible = "nvidia,tegra20-i2c", .data = TYPE_STD },
-+ { .compatible = "nvidia,tegra20-i2c-dvc", .data = TYPE_DVC },
-+ { }
-+};
-+
-+U_BOOT_DRIVER(i2c_tegra) = {
-+ .name = "i2c_tegra",
-+ .id = UCLASS_I2C,
-+ .of_match = tegra_i2c_ids,
-+ .ofdata_to_platdata = tegra_i2c_ofdata_to_platdata,
-+ .probe = tegra_i2c_probe,
-+ .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
-+ .child_pre_probe = tegra_i2c_child_pre_probe,
-+ .priv_auto_alloc_size = sizeof(struct i2c_bus),
-+ .ops = &tegra_i2c_ops,
-+};
-diff -ruN u-boot-2015.01-rc3/drivers/misc/i2c_eeprom.c u-boot/drivers/misc/i2c_eeprom.c
---- u-boot-2015.01-rc3/drivers/misc/i2c_eeprom.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/misc/i2c_eeprom.c 2015-01-01 17:34:32.649496760 +0100
-@@ -0,0 +1,51 @@
-+/*
-+ * Copyright (c) 2014 Google, Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <i2c.h>
-+#include <i2c_eeprom.h>
-+
-+static int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf,
-+ int size)
-+{
-+ return -ENODEV;
-+}
-+
-+static int i2c_eeprom_write(struct udevice *dev, int offset,
-+ const uint8_t *buf, int size)
-+{
-+ return -ENODEV;
-+}
-+
-+struct i2c_eeprom_ops i2c_eeprom_std_ops = {
-+ .read = i2c_eeprom_read,
-+ .write = i2c_eeprom_write,
-+};
-+
-+int i2c_eeprom_std_probe(struct udevice *dev)
-+{
-+ return 0;
-+}
-+
-+static const struct udevice_id i2c_eeprom_std_ids[] = {
-+ { .compatible = "i2c-eeprom" },
-+ { }
-+};
-+
-+U_BOOT_DRIVER(i2c_eeprom_std) = {
-+ .name = "i2c_eeprom",
-+ .id = UCLASS_I2C_EEPROM,
-+ .of_match = i2c_eeprom_std_ids,
-+ .probe = i2c_eeprom_std_probe,
-+ .priv_auto_alloc_size = sizeof(struct i2c_eeprom),
-+ .ops = &i2c_eeprom_std_ops,
-+};
-+
-+UCLASS_DRIVER(i2c_eeprom) = {
-+ .id = UCLASS_I2C_EEPROM,
-+ .name = "i2c_eeprom",
-+};
-diff -ruN u-boot-2015.01-rc3/drivers/misc/i2c_eeprom_emul.c u-boot/drivers/misc/i2c_eeprom_emul.c
---- u-boot-2015.01-rc3/drivers/misc/i2c_eeprom_emul.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/misc/i2c_eeprom_emul.c 2015-01-01 17:34:32.649496760 +0100
-@@ -0,0 +1,168 @@
-+/*
-+ * Simulate an I2C eeprom
-+ *
-+ * Copyright (c) 2014 Google, Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <fdtdec.h>
-+#include <i2c.h>
-+#include <malloc.h>
-+#include <asm/test.h>
-+
-+#ifdef DEBUG
-+#define debug_buffer print_buffer
-+#else
-+#define debug_buffer(x, ...)
-+#endif
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+struct sandbox_i2c_flash_plat_data {
-+ enum sandbox_i2c_eeprom_test_mode test_mode;
-+ const char *filename;
-+ int offset_len; /* Length of an offset in bytes */
-+ int size; /* Size of data buffer */
-+};
-+
-+struct sandbox_i2c_flash {
-+ uint8_t *data;
-+};
-+
-+void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev,
-+ enum sandbox_i2c_eeprom_test_mode mode)
-+{
-+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
-+
-+ plat->test_mode = mode;
-+}
-+
-+void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len)
-+{
-+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
-+
-+ plat->offset_len = offset_len;
-+}
-+
-+static int sandbox_i2c_eeprom_xfer(struct udevice *emul, struct i2c_msg *msg,
-+ int nmsgs)
-+{
-+ struct sandbox_i2c_flash *priv = dev_get_priv(emul);
-+ uint offset = 0;
-+
-+ debug("\n%s\n", __func__);
-+ debug_buffer(0, priv->data, 1, 16, 0);
-+ for (; nmsgs > 0; nmsgs--, msg++) {
-+ struct sandbox_i2c_flash_plat_data *plat =
-+ dev_get_platdata(emul);
-+ int len;
-+ u8 *ptr;
-+
-+ if (!plat->size)
-+ return -ENODEV;
-+ if (msg->addr + msg->len > plat->size) {
-+ debug("%s: Address %x, len %x is outside range 0..%x\n",
-+ __func__, msg->addr, msg->len, plat->size);
-+ return -EINVAL;
-+ }
-+ len = msg->len;
-+ debug(" %s: msg->len=%d",
-+ msg->flags & I2C_M_RD ? "read" : "write",
-+ msg->len);
-+ if (msg->flags & I2C_M_RD) {
-+ if (plat->test_mode == SIE_TEST_MODE_SINGLE_BYTE)
-+ len = 1;
-+ debug(", offset %x, len %x: ", offset, len);
-+ memcpy(msg->buf, priv->data + offset, len);
-+ memset(msg->buf + len, '\xff', msg->len - len);
-+ debug_buffer(0, msg->buf, 1, msg->len, 0);
-+ } else if (len >= plat->offset_len) {
-+ int i;
-+
-+ ptr = msg->buf;
-+ for (i = 0; i < plat->offset_len; i++, len--)
-+ offset = (offset << 8) | *ptr++;
-+ debug(", set offset %x: ", offset);
-+ debug_buffer(0, msg->buf, 1, msg->len, 0);
-+ if (plat->test_mode == SIE_TEST_MODE_SINGLE_BYTE)
-+ len = min(len, 1);
-+
-+ /* For testing, map offsets into our limited buffer */
-+ for (i = 24; i > 0; i -= 8) {
-+ if (offset > (1 << i)) {
-+ offset = (offset >> i) |
-+ (offset & ((1 << i) - 1));
-+ offset += i;
-+ }
-+ }
-+ memcpy(priv->data + offset, ptr, len);
-+ }
-+ }
-+ debug_buffer(0, priv->data, 1, 16, 0);
-+
-+ return 0;
-+}
-+
-+struct dm_i2c_ops sandbox_i2c_emul_ops = {
-+ .xfer = sandbox_i2c_eeprom_xfer,
-+};
-+
-+static int sandbox_i2c_eeprom_ofdata_to_platdata(struct udevice *dev)
-+{
-+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
-+
-+ plat->size = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
-+ "sandbox,size", 32);
-+ plat->filename = fdt_getprop(gd->fdt_blob, dev->of_offset,
-+ "sandbox,filename", NULL);
-+ if (!plat->filename) {
-+ debug("%s: No filename for device '%s'\n", __func__,
-+ dev->name);
-+ return -EINVAL;
-+ }
-+ plat->test_mode = SIE_TEST_MODE_NONE;
-+ plat->offset_len = 1;
-+
-+ return 0;
-+}
-+
-+static int sandbox_i2c_eeprom_probe(struct udevice *dev)
-+{
-+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
-+ struct sandbox_i2c_flash *priv = dev_get_priv(dev);
-+
-+ priv->data = calloc(1, plat->size);
-+ if (!priv->data)
-+ return -ENOMEM;
-+
-+ return 0;
-+}
-+
-+static int sandbox_i2c_eeprom_remove(struct udevice *dev)
-+{
-+ struct sandbox_i2c_flash *priv = dev_get_priv(dev);
-+
-+ free(priv->data);
-+
-+ return 0;
-+}
-+
-+static const struct udevice_id sandbox_i2c_ids[] = {
-+ { .compatible = "sandbox,i2c-eeprom" },
-+ { }
-+};
-+
-+U_BOOT_DRIVER(sandbox_i2c_emul) = {
-+ .name = "sandbox_i2c_eeprom_emul",
-+ .id = UCLASS_I2C_EMUL,
-+ .of_match = sandbox_i2c_ids,
-+ .ofdata_to_platdata = sandbox_i2c_eeprom_ofdata_to_platdata,
-+ .probe = sandbox_i2c_eeprom_probe,
-+ .remove = sandbox_i2c_eeprom_remove,
-+ .priv_auto_alloc_size = sizeof(struct sandbox_i2c_flash),
-+ .platdata_auto_alloc_size = sizeof(struct sandbox_i2c_flash_plat_data),
-+ .ops = &sandbox_i2c_emul_ops,
-+};
-diff -ruN u-boot-2015.01-rc3/drivers/misc/Makefile u-boot/drivers/misc/Makefile
---- u-boot-2015.01-rc3/drivers/misc/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/misc/Makefile 2015-01-01 17:34:32.649496760 +0100
-@@ -15,11 +15,16 @@
- obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
- obj-$(CONFIG_FSL_IIM) += fsl_iim.o
- obj-$(CONFIG_GPIO_LED) += gpio_led.o
-+obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o
- obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
- obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
- obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
- obj-$(CONFIG_NS87308) += ns87308.o
- obj-$(CONFIG_PDSP188x) += pdsp188x.o
-+ifdef CONFIG_DM_I2C
-+obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o
-+endif
-+obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o
- obj-$(CONFIG_STATUS_LED) += status_led.o
- obj-$(CONFIG_TWL4030_LED) += twl4030_led.o
- obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
-diff -ruN u-boot-2015.01-rc3/drivers/misc/mxc_ocotp.c u-boot/drivers/misc/mxc_ocotp.c
---- u-boot-2015.01-rc3/drivers/misc/mxc_ocotp.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/misc/mxc_ocotp.c 2015-01-01 17:34:32.649496760 +0100
-@@ -81,8 +81,6 @@
- err = !!(readl(®s->ctrl) & BM_CTRL_ERROR);
- clear_error(regs);
-
-- enable_ocotp_clk(0);
--
- if (err) {
- printf("mxc_ocotp %s(): Access protect error\n", caller);
- return -EIO;
-diff -ruN u-boot-2015.01-rc3/drivers/misc/mxs_ocotp.c u-boot/drivers/misc/mxs_ocotp.c
---- u-boot-2015.01-rc3/drivers/misc/mxs_ocotp.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/misc/mxs_ocotp.c 2015-01-01 17:34:32.649496760 +0100
-@@ -187,6 +187,8 @@
- uint32_t hclk_val, vddio_val;
- int ret;
-
-+ mxs_ocotp_clear_error();
-+
- /* Make sure the banks are closed for reading. */
- ret = mxs_ocotp_read_bank_open(0);
- if (ret) {
-@@ -221,13 +223,17 @@
- goto fail;
- }
-
-+ /* Check for errors */
-+ if (readl(&ocotp_regs->hw_ocotp_ctrl) & OCOTP_CTRL_ERROR) {
-+ puts("Failed writing fuses!\n");
-+ ret = -EPERM;
-+ goto fail;
-+ }
-+
- fail:
- mxs_ocotp_scale_vddio(0, &vddio_val);
-- ret = mxs_ocotp_scale_hclk(0, &hclk_val);
-- if (ret) {
-+ if (mxs_ocotp_scale_hclk(0, &hclk_val))
- puts("Failed scaling up the HCLK!\n");
-- return ret;
-- }
-
- return ret;
- }
-diff -ruN u-boot-2015.01-rc3/drivers/misc/smsc_lpc47m.c u-boot/drivers/misc/smsc_lpc47m.c
---- u-boot-2015.01-rc3/drivers/misc/smsc_lpc47m.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/misc/smsc_lpc47m.c 2015-01-01 17:34:32.649496760 +0100
-@@ -0,0 +1,33 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/pnp_def.h>
-+
-+static void pnp_enter_conf_state(u16 dev)
-+{
-+ u16 port = dev >> 8;
-+
-+ outb(0x55, port);
-+}
-+
-+static void pnp_exit_conf_state(u16 dev)
-+{
-+ u16 port = dev >> 8;
-+
-+ outb(0xaa, port);
-+}
-+
-+void lpc47m_enable_serial(u16 dev, u16 iobase)
-+{
-+ pnp_enter_conf_state(dev);
-+ pnp_set_logical_device(dev);
-+ pnp_set_enable(dev, 0);
-+ pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
-+ pnp_set_enable(dev, 1);
-+ pnp_exit_conf_state(dev);
-+}
-diff -ruN u-boot-2015.01-rc3/drivers/mmc/dw_mmc.c u-boot/drivers/mmc/dw_mmc.c
---- u-boot-2015.01-rc3/drivers/mmc/dw_mmc.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/mmc/dw_mmc.c 2015-01-01 17:34:32.653496694 +0100
-@@ -318,7 +318,7 @@
- dwmci_writel(host, DWMCI_CTYPE, ctype);
-
- regs = dwmci_readl(host, DWMCI_UHS_REG);
-- if (mmc->card_caps & MMC_MODE_DDR_52MHz)
-+ if (mmc->ddr_mode)
- regs |= DWMCI_DDR_MODE;
- else
- regs &= DWMCI_DDR_MODE;
-diff -ruN u-boot-2015.01-rc3/drivers/mmc/exynos_dw_mmc.c u-boot/drivers/mmc/exynos_dw_mmc.c
---- u-boot-2015.01-rc3/drivers/mmc/exynos_dw_mmc.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/mmc/exynos_dw_mmc.c 2015-01-01 17:34:32.653496694 +0100
-@@ -101,7 +101,7 @@
- host->get_mmc_clk = exynos_dwmci_get_clk;
- /* Add the mmc channel to be registered with mmc core */
- if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
-- debug("dwmmc%d registration failed\n", index);
-+ printf("DWMMC%d registration failed\n", index);
- return -1;
- }
- return 0;
-@@ -146,7 +146,7 @@
- flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
- err = exynos_pinmux_config(host->dev_id, flag);
- if (err) {
-- debug("DWMMC not configure\n");
-+ printf("DWMMC%d not configure\n", index);
- return err;
- }
-
-@@ -162,21 +162,22 @@
- /* Extract device id for each mmc channel */
- host->dev_id = pinmux_decode_periph_id(blob, node);
-
-+ host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
-+ if (host->dev_index == host->dev_id)
-+ host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
-+
-+
- /* Get the bus width from the device node */
- host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
- if (host->buswidth <= 0) {
-- debug("DWMMC: Can't get bus-width\n");
-+ printf("DWMMC%d: Can't get bus-width\n", host->dev_index);
- return -EINVAL;
- }
-
-- host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
-- if (host->dev_index == host->dev_id)
-- host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
--
- /* Set the base address from the device node */
- base = fdtdec_get_addr(blob, node, "reg");
- if (!base) {
-- debug("DWMMC: Can't get base address\n");
-+ printf("DWMMC%d: Can't get base address\n", host->dev_index);
- return -EINVAL;
- }
- host->ioaddr = (void *)base;
-@@ -184,7 +185,8 @@
- /* Extract the timing info from the node */
- err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
- if (err) {
-- debug("Can't get sdr-timings for devider\n");
-+ printf("DWMMC%d: Can't get sdr-timings for devider\n",
-+ host->dev_index);
- return -EINVAL;
- }
-
-@@ -214,7 +216,7 @@
- host = &dwmci_host[i];
- err = exynos_dwmci_get_config(blob, node, host);
- if (err) {
-- debug("%s: failed to decode dev %d\n", __func__, i);
-+ printf("%s: failed to decode dev %d\n", __func__, i);
- return err;
- }
-
-diff -ruN u-boot-2015.01-rc3/drivers/mmc/mmc.c u-boot/drivers/mmc/mmc.c
---- u-boot-2015.01-rc3/drivers/mmc/mmc.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/mmc/mmc.c 2015-01-01 17:34:32.653496694 +0100
-@@ -159,7 +159,7 @@
- {
- struct mmc_cmd cmd;
-
-- if (mmc->card_caps & MMC_MODE_DDR_52MHz)
-+ if (mmc->ddr_mode)
- return 0;
-
- cmd.cmdidx = MMC_CMD_SET_BLOCKLEN;
-@@ -486,7 +486,7 @@
- char cardtype;
- int err;
-
-- mmc->card_caps = 0;
-+ mmc->card_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
-
- if (mmc_host_is_spi(mmc))
- return 0;
-@@ -519,7 +519,7 @@
-
- /* High Speed is set, there are two types: 52MHz and 26MHz */
- if (cardtype & EXT_CSD_CARD_TYPE_52) {
-- if (cardtype & EXT_CSD_CARD_TYPE_DDR_52)
-+ if (cardtype & EXT_CSD_CARD_TYPE_DDR_1_8V)
- mmc->card_caps |= MMC_MODE_DDR_52MHz;
- mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
- } else {
-@@ -1001,6 +1001,9 @@
- case 6:
- mmc->version = MMC_VERSION_4_5;
- break;
-+ case 7:
-+ mmc->version = MMC_VERSION_5_0;
-+ break;
- }
-
- /*
-@@ -1022,6 +1025,21 @@
- mmc->erase_grp_size =
- ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] *
- MMC_MAX_BLOCK_LEN * 1024;
-+ /*
-+ * if high capacity and partition setting completed
-+ * SEC_COUNT is valid even if it is smaller than 2 GiB
-+ * JEDEC Standard JESD84-B45, 6.2.4
-+ */
-+ if (mmc->high_capacity &&
-+ (ext_csd[EXT_CSD_PARTITION_SETTING] &
-+ EXT_CSD_PARTITION_SETTING_COMPLETED)) {
-+ capacity = (ext_csd[EXT_CSD_SEC_CNT]) |
-+ (ext_csd[EXT_CSD_SEC_CNT + 1] << 8) |
-+ (ext_csd[EXT_CSD_SEC_CNT + 2] << 16) |
-+ (ext_csd[EXT_CSD_SEC_CNT + 3] << 24);
-+ capacity *= MMC_MAX_BLOCK_LEN;
-+ mmc->capacity_user = capacity;
-+ }
- } else {
- /* Calculate the group size from the csd value. */
- int erase_gsz, erase_gmul;
-@@ -1103,8 +1121,10 @@
-
- /* An array to map CSD bus widths to host cap bits */
- static unsigned ext_to_hostcaps[] = {
-- [EXT_CSD_DDR_BUS_WIDTH_4] = MMC_MODE_DDR_52MHz,
-- [EXT_CSD_DDR_BUS_WIDTH_8] = MMC_MODE_DDR_52MHz,
-+ [EXT_CSD_DDR_BUS_WIDTH_4] =
-+ MMC_MODE_DDR_52MHz | MMC_MODE_4BIT,
-+ [EXT_CSD_DDR_BUS_WIDTH_8] =
-+ MMC_MODE_DDR_52MHz | MMC_MODE_8BIT,
- [EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT,
- [EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT,
- };
-@@ -1116,13 +1136,13 @@
-
- for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) {
- unsigned int extw = ext_csd_bits[idx];
-+ unsigned int caps = ext_to_hostcaps[extw];
-
- /*
-- * Check to make sure the controller supports
-- * this bus width, if it's more than 1
-+ * Check to make sure the card and controller support
-+ * these capabilities
- */
-- if (extw != EXT_CSD_BUS_WIDTH_1 &&
-- !(mmc->cfg->host_caps & ext_to_hostcaps[extw]))
-+ if ((mmc->card_caps & caps) != caps)
- continue;
-
- err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
-@@ -1131,26 +1151,33 @@
- if (err)
- continue;
-
-+ mmc->ddr_mode = (caps & MMC_MODE_DDR_52MHz) ? 1 : 0;
- mmc_set_bus_width(mmc, widths[idx]);
-
- err = mmc_send_ext_csd(mmc, test_csd);
-- /* Only compare read only fields */
-- if (!err && ext_csd[EXT_CSD_PARTITIONING_SUPPORT] \
-- == test_csd[EXT_CSD_PARTITIONING_SUPPORT]
-- && ext_csd[EXT_CSD_HC_WP_GRP_SIZE] \
-- == test_csd[EXT_CSD_HC_WP_GRP_SIZE] \
-- && ext_csd[EXT_CSD_REV] \
-- == test_csd[EXT_CSD_REV]
-- && ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] \
-- == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
-- && memcmp(&ext_csd[EXT_CSD_SEC_CNT], \
-- &test_csd[EXT_CSD_SEC_CNT], 4) == 0) {
-
-- mmc->card_caps |= ext_to_hostcaps[extw];
-+ if (err)
-+ continue;
-+
-+ /* Only compare read only fields */
-+ if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT]
-+ == test_csd[EXT_CSD_PARTITIONING_SUPPORT] &&
-+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE]
-+ == test_csd[EXT_CSD_HC_WP_GRP_SIZE] &&
-+ ext_csd[EXT_CSD_REV]
-+ == test_csd[EXT_CSD_REV] &&
-+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
-+ == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE] &&
-+ memcmp(&ext_csd[EXT_CSD_SEC_CNT],
-+ &test_csd[EXT_CSD_SEC_CNT], 4) == 0)
- break;
-- }
-+ else
-+ err = SWITCH_ERR;
- }
-
-+ if (err)
-+ return err;
-+
- if (mmc->card_caps & MMC_MODE_HS) {
- if (mmc->card_caps & MMC_MODE_HS_52MHz)
- mmc->tran_speed = 52000000;
-@@ -1161,6 +1188,12 @@
-
- mmc_set_clock(mmc, mmc->tran_speed);
-
-+ /* Fix the block length for DDR mode */
-+ if (mmc->ddr_mode) {
-+ mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
-+ mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
-+ }
-+
- /* fill in device description */
- mmc->block_dev.lun = 0;
- mmc->block_dev.type = 0;
-@@ -1306,6 +1339,7 @@
- if (err)
- return err;
-
-+ mmc->ddr_mode = 0;
- mmc_set_bus_width(mmc, 1);
- mmc_set_clock(mmc, 1);
-
-@@ -1408,8 +1442,11 @@
-
- printf("%s: %d", m->cfg->name, m->block_dev.dev);
-
-- if (entry->next != &mmc_devices)
-- printf("%c ", separator);
-+ if (entry->next != &mmc_devices) {
-+ printf("%c", separator);
-+ if (separator != '\n')
-+ puts (" ");
-+ }
- }
-
- printf("\n");
-diff -ruN u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_nand.c u-boot/drivers/mtd/nand/fsl_ifc_nand.c
---- u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_nand.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/mtd/nand/fsl_ifc_nand.c 2015-01-01 17:34:32.657496629 +0100
-@@ -292,7 +292,7 @@
- struct fsl_ifc *ifc = ctrl->regs;
- u32 timeo = (CONFIG_SYS_HZ * 10) / 1000;
- u32 time_start;
-- u32 eccstat[4];
-+ u32 eccstat[4] = {0};
- int i;
-
- /* set the chip select for NAND Transaction */
-diff -ruN u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_spl.c u-boot/drivers/mtd/nand/fsl_ifc_spl.c
---- u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_spl.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/mtd/nand/fsl_ifc_spl.c 2015-01-01 17:34:32.657496629 +0100
-@@ -254,3 +254,13 @@
- uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
- uboot();
- }
-+
-+#ifndef CONFIG_SPL_NAND_INIT
-+void nand_init(void)
-+{
-+}
-+
-+void nand_deselect(void)
-+{
-+}
-+#endif
-diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_internal.h u-boot/drivers/mtd/spi/sf_internal.h
---- u-boot-2015.01-rc3/drivers/mtd/spi/sf_internal.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/mtd/spi/sf_internal.h 2015-01-01 17:34:32.665496498 +0100
-@@ -23,13 +23,16 @@
- /* Enum list - Full read commands */
- enum spi_read_cmds {
- ARRAY_SLOW = 1 << 0,
-- DUAL_OUTPUT_FAST = 1 << 1,
-- DUAL_IO_FAST = 1 << 2,
-- QUAD_OUTPUT_FAST = 1 << 3,
-- QUAD_IO_FAST = 1 << 4,
-+ ARRAY_FAST = 1 << 1,
-+ DUAL_OUTPUT_FAST = 1 << 2,
-+ DUAL_IO_FAST = 1 << 3,
-+ QUAD_OUTPUT_FAST = 1 << 4,
-+ QUAD_IO_FAST = 1 << 5,
- };
-
--#define RD_EXTN (ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
-+/* Normal - Extended - Full command set */
-+#define RD_NORM (ARRAY_SLOW | ARRAY_FAST)
-+#define RD_EXTN (RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
- #define RD_FULL (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST)
-
- /* sf param flags */
-@@ -37,9 +40,13 @@
- SECT_4K = 1 << 0,
- SECT_32K = 1 << 1,
- E_FSR = 1 << 2,
-- WR_QPP = 1 << 3,
-+ SST_BP = 1 << 3,
-+ SST_WP = 1 << 4,
-+ WR_QPP = 1 << 5,
- };
-
-+#define SST_WR (SST_BP | SST_WP)
-+
- #define SPI_FLASH_3B_ADDR_LEN 3
- #define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN)
- #define SPI_FLASH_16MB_BOUN 0x1000000
-@@ -101,12 +108,13 @@
-
- /* SST specific */
- #ifdef CONFIG_SPI_FLASH_SST
--# define SST_WP 0x01 /* Supports AAI word program */
- # define CMD_SST_BP 0x02 /* Byte Program */
- # define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */
-
- int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf);
-+int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
-+ const void *buf);
- #endif
-
- /**
-diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_ops.c u-boot/drivers/mtd/spi/sf_ops.c
---- u-boot-2015.01-rc3/drivers/mtd/spi/sf_ops.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/mtd/spi/sf_ops.c 2015-01-01 17:34:32.665496498 +0100
-@@ -517,4 +517,35 @@
- spi_release_bus(flash->spi);
- return ret;
- }
-+
-+int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
-+ const void *buf)
-+{
-+ size_t actual;
-+ int ret;
-+
-+ ret = spi_claim_bus(flash->spi);
-+ if (ret) {
-+ debug("SF: Unable to claim SPI bus\n");
-+ return ret;
-+ }
-+
-+ for (actual = 0; actual < len; actual++) {
-+ ret = sst_byte_write(flash, offset, buf + actual);
-+ if (ret) {
-+ debug("SF: sst byte program failed\n");
-+ break;
-+ }
-+ offset++;
-+ }
-+
-+ if (!ret)
-+ ret = spi_flash_cmd_write_disable(flash);
-+
-+ debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
-+ ret ? "failure" : "success", len, offset - actual);
-+
-+ spi_release_bus(flash->spi);
-+ return ret;
-+}
- #endif
-diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_params.c u-boot/drivers/mtd/spi/sf_params.c
---- u-boot-2015.01-rc3/drivers/mtd/spi/sf_params.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/mtd/spi/sf_params.c 2015-01-01 17:34:32.665496498 +0100
-@@ -15,42 +15,42 @@
- /* SPI/QSPI flash device params structure */
- const struct spi_flash_params spi_flash_params_table[] = {
- #ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */
-- {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, 0, SECT_4K},
-- {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, 0, SECT_4K},
-- {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, 0, SECT_4K},
-- {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, 0, SECT_4K},
-- {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, 0, SECT_4K},
-- {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, 0, SECT_4K},
-- {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, 0, SECT_4K},
-- {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, 0, SECT_4K},
-+ {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K},
-+ {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K},
-+ {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K},
-+ {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K},
-+ {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K},
-+ {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
-+ {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
-+ {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
- #endif
- #ifdef CONFIG_SPI_FLASH_EON /* EON */
-- {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0, 0},
-- {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, 0, SECT_4K},
-- {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0, 0},
-- {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0, 0},
-+ {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, RD_NORM, 0},
-+ {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
-+ {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, RD_NORM, 0},
-+ {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, RD_NORM, 0},
- #endif
- #ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */
-- {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, 0, SECT_4K},
-- {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, 0, SECT_4K},
-+ {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
-+ {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
- #endif
- #ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
-- {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, 0, 0},
-- {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0, 0},
-- {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0, 0},
-- {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0, 0},
-- {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0, 0},
-- {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0, 0},
-+ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM, 0},
-+ {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, RD_NORM, 0},
-+ {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, RD_NORM, 0},
-+ {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, RD_NORM, 0},
-+ {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, RD_NORM, 0},
-+ {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, RD_NORM, 0},
- {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP},
- {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP},
- {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP},
- {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP},
- #endif
- #ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
-- {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0, 0},
-- {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0, 0},
-- {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0, 0},
-- {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0, 0},
-+ {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, RD_NORM, 0},
-+ {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, RD_NORM, 0},
-+ {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, RD_NORM, 0},
-+ {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, RD_NORM, 0},
- {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL, WR_QPP},
- {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL, WR_QPP},
- {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL, WR_QPP},
-@@ -64,17 +64,17 @@
- {"S25FL512S_512K", 0x010220, 0x4f00, 256 * 1024, 256, RD_FULL, WR_QPP},
- #endif
- #ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
-- {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0, 0},
-- {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0, 0},
-- {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0, 0},
-- {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0, 0},
-- {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0, 0},
-- {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, 0, 0},
-+ {"M25P10", 0x202011, 0x0, 32 * 1024, 4, RD_NORM, 0},
-+ {"M25P20", 0x202012, 0x0, 64 * 1024, 4, RD_NORM, 0},
-+ {"M25P40", 0x202013, 0x0, 64 * 1024, 8, RD_NORM, 0},
-+ {"M25P80", 0x202014, 0x0, 64 * 1024, 16, RD_NORM, 0},
-+ {"M25P16", 0x202015, 0x0, 64 * 1024, 32, RD_NORM, 0},
-+ {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, RD_NORM, 0},
- {"M25PX16", 0x207115, 0x1000, 64 * 1024, 32, RD_EXTN, 0},
-- {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0, 0},
-- {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0, 0},
-- {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0, 0},
-- {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, 0, SECT_4K},
-+ {"M25P32", 0x202016, 0x0, 64 * 1024, 64, RD_NORM, 0},
-+ {"M25P64", 0x202017, 0x0, 64 * 1024, 128, RD_NORM, 0},
-+ {"M25P128", 0x202018, 0x0, 256 * 1024, 64, RD_NORM, 0},
-+ {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
- {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K},
- {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K},
- {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K},
-@@ -89,25 +89,25 @@
- {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K},
- #endif
- #ifdef CONFIG_SPI_FLASH_SST /* SST */
-- {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP},
-- {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP},
-- {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, 0, SECT_4K | SST_WP},
-- {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, 0, SECT_4K | SST_WP},
-- {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, 0, SECT_4K},
-- {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, 0, SECT_4K | SST_WP},
-- {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, 0, SECT_4K | SST_WP},
-- {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, 0, SECT_4K | SST_WP},
-- {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP},
-- {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP},
-+ {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR},
-+ {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR},
-+ {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K | SST_WR},
-+ {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K | SST_WR},
-+ {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
-+ {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, RD_NORM, SECT_4K | SST_WR},
-+ {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, RD_NORM, SECT_4K | SST_WR},
-+ {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K | SST_WR},
-+ {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR},
-+ {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR},
- #endif
- #ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */
-- {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0, 0},
-- {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0, 0},
-- {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0, 0},
-- {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, 0, SECT_4K},
-- {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, 0, SECT_4K},
-- {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, 0, SECT_4K},
-- {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, 0, SECT_4K},
-+ {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, RD_NORM, 0},
-+ {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, RD_NORM, 0},
-+ {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, RD_NORM, 0},
-+ {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K},
-+ {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K},
-+ {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
-+ {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
- {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K},
- {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K},
-diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_probe.c u-boot/drivers/mtd/spi/sf_probe.c
---- u-boot-2015.01-rc3/drivers/mtd/spi/sf_probe.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/mtd/spi/sf_probe.c 2015-01-01 17:34:32.665496498 +0100
-@@ -24,6 +24,7 @@
- /* Read commands array */
- static u8 spi_read_cmds_array[] = {
- CMD_READ_ARRAY_SLOW,
-+ CMD_READ_ARRAY_FAST,
- CMD_READ_DUAL_OUTPUT_FAST,
- CMD_READ_DUAL_IO_FAST,
- CMD_READ_QUAD_OUTPUT_FAST,
-@@ -135,8 +136,12 @@
- #ifndef CONFIG_DM_SPI_FLASH
- flash->write = spi_flash_cmd_write_ops;
- #if defined(CONFIG_SPI_FLASH_SST)
-- if (params->flags & SST_WP)
-- flash->write = sst_write_wp;
-+ if (params->flags & SST_WR) {
-+ if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
-+ flash->write = sst_write_bp;
-+ else
-+ flash->write = sst_write_wp;
-+ }
- #endif
- flash->erase = spi_flash_cmd_erase_ops;
- flash->read = spi_flash_cmd_read_ops;
-diff -ruN u-boot-2015.01-rc3/drivers/net/fm/init.c u-boot/drivers/net/fm/init.c
---- u-boot-2015.01-rc3/drivers/net/fm/init.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/net/fm/init.c 2015-01-01 17:34:32.677496300 +0100
-@@ -247,17 +247,17 @@
- }
-
- #ifdef CONFIG_SYS_FMAN_V3
-+#ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
- /*
-- * Physically FM1_DTSEC9 and FM1_10GEC1 use the same dual-role MAC, when
-- * FM1_10GEC1 is enabled and FM1_DTSEC9 is disabled, ensure that the
-- * dual-role MAC is not disabled, ditto for other dual-role MACs.
-+ * On T2/T4 SoCs, physically FM1_DTSEC9 and FM1_10GEC1 use the same
-+ * dual-role MAC, when FM1_10GEC1 is enabled and FM1_DTSEC9
-+ * is disabled, ensure that the dual-role MAC is not disabled,
-+ * ditto for other dual-role MACs.
- */
- if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
- ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
-- ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
- ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3))) ||
- ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4))) ||
-- ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1))) ||
- ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) ||
- ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
- ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1))) ||
-@@ -269,6 +269,17 @@
- ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9))) ||
- ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
- #endif
-+#else
-+ /* FM1_DTSECx and FM1_10GECx use the same dual-role MAC */
-+ if (((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
-+ ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
-+ ((info->port == FM1_DTSEC3) && (PORT_IS_ENABLED(FM1_10GEC3))) ||
-+ ((info->port == FM1_DTSEC4) && (PORT_IS_ENABLED(FM1_10GEC4))) ||
-+ ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1))) ||
-+ ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC2))) ||
-+ ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC3))) ||
-+ ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC4)))
-+#endif
- )
- return;
- #endif
-diff -ruN u-boot-2015.01-rc3/drivers/pci/Makefile u-boot/drivers/pci/Makefile
---- u-boot-2015.01-rc3/drivers/pci/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/pci/Makefile 2015-01-01 17:34:32.685496170 +0100
-@@ -17,3 +17,4 @@
- obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
- obj-$(CONFIG_TSI108_PCI) += tsi108_pci.o
- obj-$(CONFIG_WINBOND_83C553) += w83c553f.o
-+obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o
-diff -ruN u-boot-2015.01-rc3/drivers/pci/pcie_layerscape.c u-boot/drivers/pci/pcie_layerscape.c
---- u-boot-2015.01-rc3/drivers/pci/pcie_layerscape.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/pci/pcie_layerscape.c 2015-01-01 17:34:32.689496104 +0100
-@@ -0,0 +1,51 @@
-+/*
-+ * Copyright 2014 Freescale Semiconductor, Inc.
-+ * Layerscape PCIe driver
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/fsl_serdes.h>
-+#include <pci.h>
-+#include <asm/io.h>
-+#include <asm/pcie_layerscape.h>
-+
-+#ifdef CONFIG_OF_BOARD_SETUP
-+#include <libfdt.h>
-+#include <fdt_support.h>
-+
-+static void ft_pcie_ls_setup(void *blob, const char *pci_compat,
-+ unsigned long ctrl_addr, enum srds_prtcl dev)
-+{
-+ int off;
-+
-+ off = fdt_node_offset_by_compat_reg(blob, pci_compat,
-+ (phys_addr_t)ctrl_addr);
-+ if (off < 0)
-+ return;
-+
-+ if (!is_serdes_configured(dev))
-+ fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
-+}
-+
-+void ft_pcie_setup(void *blob, bd_t *bd)
-+{
-+ #ifdef CONFIG_PCIE1
-+ ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE1_ADDR, PCIE1);
-+ #endif
-+
-+ #ifdef CONFIG_PCIE2
-+ ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2);
-+ #endif
-+}
-+
-+#else
-+void ft_pcie_setup(void *blob, bd_t *bd)
-+{
-+}
-+#endif
-+
-+void pci_init_board(void)
-+{
-+}
-diff -ruN u-boot-2015.01-rc3/drivers/power/tps6586x.c u-boot/drivers/power/tps6586x.c
---- u-boot-2015.01-rc3/drivers/power/tps6586x.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/power/tps6586x.c 2015-01-01 17:34:32.693496038 +0100
-@@ -10,9 +10,7 @@
- #include <asm/io.h>
- #include <i2c.h>
-
--static int bus_num; /* I2C bus we are on */
--#define I2C_ADDRESS 0x34 /* chip requires this address */
--static char inited; /* 1 if we have been inited */
-+static struct udevice *tps6586x_dev;
-
- enum {
- /* Registers that we access */
-@@ -37,13 +35,9 @@
- int i;
- uchar data;
- int retval = -1;
-- int old_bus_num;
--
-- old_bus_num = i2c_get_bus_num();
-- i2c_set_bus_num(bus_num);
-
- for (i = 0; i < MAX_I2C_RETRY; ++i) {
-- if (!i2c_read(I2C_ADDRESS, reg, 1, &data, 1)) {
-+ if (!i2c_read(tps6586x_dev, reg, &data, 1)) {
- retval = (int)data;
- goto exit;
- }
-@@ -53,7 +47,6 @@
- }
-
- exit:
-- i2c_set_bus_num(old_bus_num);
- debug("pmu_read %x=%x\n", reg, retval);
- if (retval < 0)
- debug("%s: failed to read register %#x: %d\n", __func__, reg,
-@@ -65,13 +58,9 @@
- {
- int i;
- int retval = -1;
-- int old_bus_num;
--
-- old_bus_num = i2c_get_bus_num();
-- i2c_set_bus_num(bus_num);
-
- for (i = 0; i < MAX_I2C_RETRY; ++i) {
-- if (!i2c_write(I2C_ADDRESS, reg, 1, data, len)) {
-+ if (!i2c_write(tps6586x_dev, reg, data, len)) {
- retval = 0;
- goto exit;
- }
-@@ -81,7 +70,6 @@
- }
-
- exit:
-- i2c_set_bus_num(old_bus_num);
- debug("pmu_write %x=%x: ", reg, retval);
- for (i = 0; i < len; i++)
- debug("%x ", data[i]);
-@@ -163,7 +151,7 @@
- uchar val;
- int ret;
-
-- assert(inited);
-+ assert(tps6586x_dev);
- ret = tps6586x_read(PFM_MODE);
- if (ret != -1) {
- val = (uchar)ret;
-@@ -184,7 +172,7 @@
- int sm0, sm1;
- int bad;
-
-- assert(inited);
-+ assert(tps6586x_dev);
-
- /* get current voltage settings */
- if (read_voltages(&sm0, &sm1)) {
-@@ -255,10 +243,9 @@
- return bad ? -1 : 0;
- }
-
--int tps6586x_init(int bus)
-+int tps6586x_init(struct udevice *dev)
- {
-- bus_num = bus;
-- inited = 1;
-+ tps6586x_dev = dev;
-
- return 0;
- }
-diff -ruN u-boot-2015.01-rc3/drivers/qe/qe.c u-boot/drivers/qe/qe.c
---- u-boot-2015.01-rc3/drivers/qe/qe.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/qe/qe.c 2015-01-01 17:34:32.693496038 +0100
-@@ -13,6 +13,9 @@
- #include "asm/io.h"
- #include "linux/immap_qe.h"
- #include "qe.h"
-+#ifdef CONFIG_LS102XA
-+#include <asm/arch/immap_ls102xa.h>
-+#endif
-
- #define MPC85xx_DEVDISR_QE_DISABLE 0x1
-
-@@ -335,8 +338,12 @@
- size_t length;
- const struct qe_header *hdr;
- #ifdef CONFIG_DEEP_SLEEP
-+#ifdef CONFIG_LS102XA
-+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
-+#else
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- #endif
-+#endif
- if (!firmware) {
- printf("Invalid address\n");
- return -EINVAL;
-@@ -470,8 +477,12 @@
- size_t length;
- const struct qe_header *hdr;
- #ifdef CONFIG_DEEP_SLEEP
-+#ifdef CONFIG_LS102XA
-+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
-+#else
- ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- #endif
-+#endif
- if (!firmware) {
- printf("Invalid address\n");
- return -EINVAL;
-diff -ruN u-boot-2015.01-rc3/drivers/serial/Makefile u-boot/drivers/serial/Makefile
---- u-boot-2015.01-rc3/drivers/serial/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/serial/Makefile 2015-01-01 17:34:32.697495972 +0100
-@@ -43,7 +43,7 @@
- obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o
- obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
- obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o
--obj-$(CONFIG_COREBOOT_SERIAL) += serial_coreboot.o
-+obj-$(CONFIG_X86_SERIAL) += serial_x86.o
-
- ifndef CONFIG_SPL_BUILD
- obj-$(CONFIG_USB_TTY) += usbtty.o
-diff -ruN u-boot-2015.01-rc3/drivers/serial/serial_coreboot.c u-boot/drivers/serial/serial_coreboot.c
---- u-boot-2015.01-rc3/drivers/serial/serial_coreboot.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/serial/serial_coreboot.c 1970-01-01 01:00:00.000000000 +0100
-@@ -1,38 +0,0 @@
--/*
-- * Copyright (c) 2014 Google, Inc
-- *
-- * SPDX-License-Identifier: GPL-2.0+
-- */
--
--#include <common.h>
--#include <dm.h>
--#include <ns16550.h>
--#include <serial.h>
--
--static const struct udevice_id coreboot_serial_ids[] = {
-- { .compatible = "coreboot-uart" },
-- { }
--};
--
--static int coreboot_serial_ofdata_to_platdata(struct udevice *dev)
--{
-- struct ns16550_platdata *plat = dev_get_platdata(dev);
-- int ret;
--
-- ret = ns16550_serial_ofdata_to_platdata(dev);
-- if (ret)
-- return ret;
-- plat->clock = 1843200;
--
-- return 0;
--}
--U_BOOT_DRIVER(serial_ns16550) = {
-- .name = "serial_coreboot",
-- .id = UCLASS_SERIAL,
-- .of_match = coreboot_serial_ids,
-- .ofdata_to_platdata = coreboot_serial_ofdata_to_platdata,
-- .platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
-- .priv_auto_alloc_size = sizeof(struct NS16550),
-- .probe = ns16550_serial_probe,
-- .ops = &ns16550_serial_ops,
--};
-diff -ruN u-boot-2015.01-rc3/drivers/serial/serial_pl01x.c u-boot/drivers/serial/serial_pl01x.c
---- u-boot-2015.01-rc3/drivers/serial/serial_pl01x.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/serial/serial_pl01x.c 2015-01-01 17:34:32.697495972 +0100
-@@ -348,6 +348,7 @@
- .probe = pl01x_serial_probe,
- .ops = &pl01x_serial_ops,
- .flags = DM_FLAG_PRE_RELOC,
-+ .priv_auto_alloc_size = sizeof(struct pl01x_priv),
- };
-
- #endif
-diff -ruN u-boot-2015.01-rc3/drivers/serial/serial_x86.c u-boot/drivers/serial/serial_x86.c
---- u-boot-2015.01-rc3/drivers/serial/serial_x86.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/serial/serial_x86.c 2015-01-01 17:34:32.697495972 +0100
-@@ -0,0 +1,38 @@
-+/*
-+ * Copyright (c) 2014 Google, Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <ns16550.h>
-+#include <serial.h>
-+
-+static const struct udevice_id x86_serial_ids[] = {
-+ { .compatible = "x86-uart" },
-+ { }
-+};
-+
-+static int x86_serial_ofdata_to_platdata(struct udevice *dev)
-+{
-+ struct ns16550_platdata *plat = dev_get_platdata(dev);
-+ int ret;
-+
-+ ret = ns16550_serial_ofdata_to_platdata(dev);
-+ if (ret)
-+ return ret;
-+ plat->clock = 1843200;
-+
-+ return 0;
-+}
-+U_BOOT_DRIVER(serial_ns16550) = {
-+ .name = "serial_x86",
-+ .id = UCLASS_SERIAL,
-+ .of_match = x86_serial_ids,
-+ .ofdata_to_platdata = x86_serial_ofdata_to_platdata,
-+ .platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
-+ .priv_auto_alloc_size = sizeof(struct NS16550),
-+ .probe = ns16550_serial_probe,
-+ .ops = &ns16550_serial_ops,
-+};
-diff -ruN u-boot-2015.01-rc3/drivers/spi/cadence_qspi_apb.c u-boot/drivers/spi/cadence_qspi_apb.c
---- u-boot-2015.01-rc3/drivers/spi/cadence_qspi_apb.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/spi/cadence_qspi_apb.c 2015-01-01 17:34:32.701495908 +0100
-@@ -0,0 +1,898 @@
-+/*
-+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * - Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * - Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * - Neither the name of the Altera Corporation nor the
-+ * names of its contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/errno.h>
-+#include "cadence_qspi.h"
-+
-+#define CQSPI_REG_POLL_US (1) /* 1us */
-+#define CQSPI_REG_RETRY (10000)
-+#define CQSPI_POLL_IDLE_RETRY (3)
-+
-+#define CQSPI_FIFO_WIDTH (4)
-+
-+/* Controller sram size in word */
-+#define CQSPI_REG_SRAM_SIZE_WORD (128)
-+#define CQSPI_REG_SRAM_RESV_WORDS (2)
-+#define CQSPI_REG_SRAM_PARTITION_WR (1)
-+#define CQSPI_REG_SRAM_PARTITION_RD \
-+ (CQSPI_REG_SRAM_SIZE_WORD - CQSPI_REG_SRAM_RESV_WORDS)
-+#define CQSPI_REG_SRAM_THRESHOLD_WORDS (50)
-+
-+/* Transfer mode */
-+#define CQSPI_INST_TYPE_SINGLE (0)
-+#define CQSPI_INST_TYPE_DUAL (1)
-+#define CQSPI_INST_TYPE_QUAD (2)
-+
-+#define CQSPI_STIG_DATA_LEN_MAX (8)
-+#define CQSPI_INDIRECTTRIGGER_ADDR_MASK (0xFFFFF)
-+
-+#define CQSPI_DUMMY_CLKS_PER_BYTE (8)
-+#define CQSPI_DUMMY_BYTES_MAX (4)
-+
-+
-+#define CQSPI_REG_SRAM_FILL_THRESHOLD \
-+ ((CQSPI_REG_SRAM_SIZE_WORD / 2) * CQSPI_FIFO_WIDTH)
-+/****************************************************************************
-+ * Controller's configuration and status register (offset from QSPI_BASE)
-+ ****************************************************************************/
-+#define CQSPI_REG_CONFIG 0x00
-+#define CQSPI_REG_CONFIG_CLK_POL_LSB 1
-+#define CQSPI_REG_CONFIG_CLK_PHA_LSB 2
-+#define CQSPI_REG_CONFIG_ENABLE_MASK (1 << 0)
-+#define CQSPI_REG_CONFIG_DIRECT_MASK (1 << 7)
-+#define CQSPI_REG_CONFIG_DECODE_MASK (1 << 9)
-+#define CQSPI_REG_CONFIG_XIP_IMM_MASK (1 << 18)
-+#define CQSPI_REG_CONFIG_CHIPSELECT_LSB 10
-+#define CQSPI_REG_CONFIG_BAUD_LSB 19
-+#define CQSPI_REG_CONFIG_IDLE_LSB 31
-+#define CQSPI_REG_CONFIG_CHIPSELECT_MASK 0xF
-+#define CQSPI_REG_CONFIG_BAUD_MASK 0xF
-+
-+#define CQSPI_REG_RD_INSTR 0x04
-+#define CQSPI_REG_RD_INSTR_OPCODE_LSB 0
-+#define CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB 8
-+#define CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB 12
-+#define CQSPI_REG_RD_INSTR_TYPE_DATA_LSB 16
-+#define CQSPI_REG_RD_INSTR_MODE_EN_LSB 20
-+#define CQSPI_REG_RD_INSTR_DUMMY_LSB 24
-+#define CQSPI_REG_RD_INSTR_TYPE_INSTR_MASK 0x3
-+#define CQSPI_REG_RD_INSTR_TYPE_ADDR_MASK 0x3
-+#define CQSPI_REG_RD_INSTR_TYPE_DATA_MASK 0x3
-+#define CQSPI_REG_RD_INSTR_DUMMY_MASK 0x1F
-+
-+#define CQSPI_REG_WR_INSTR 0x08
-+#define CQSPI_REG_WR_INSTR_OPCODE_LSB 0
-+
-+#define CQSPI_REG_DELAY 0x0C
-+#define CQSPI_REG_DELAY_TSLCH_LSB 0
-+#define CQSPI_REG_DELAY_TCHSH_LSB 8
-+#define CQSPI_REG_DELAY_TSD2D_LSB 16
-+#define CQSPI_REG_DELAY_TSHSL_LSB 24
-+#define CQSPI_REG_DELAY_TSLCH_MASK 0xFF
-+#define CQSPI_REG_DELAY_TCHSH_MASK 0xFF
-+#define CQSPI_REG_DELAY_TSD2D_MASK 0xFF
-+#define CQSPI_REG_DELAY_TSHSL_MASK 0xFF
-+
-+#define CQSPI_READLCAPTURE 0x10
-+#define CQSPI_READLCAPTURE_BYPASS_LSB 0
-+#define CQSPI_READLCAPTURE_DELAY_LSB 1
-+#define CQSPI_READLCAPTURE_DELAY_MASK 0xF
-+
-+#define CQSPI_REG_SIZE 0x14
-+#define CQSPI_REG_SIZE_ADDRESS_LSB 0
-+#define CQSPI_REG_SIZE_PAGE_LSB 4
-+#define CQSPI_REG_SIZE_BLOCK_LSB 16
-+#define CQSPI_REG_SIZE_ADDRESS_MASK 0xF
-+#define CQSPI_REG_SIZE_PAGE_MASK 0xFFF
-+#define CQSPI_REG_SIZE_BLOCK_MASK 0x3F
-+
-+#define CQSPI_REG_SRAMPARTITION 0x18
-+#define CQSPI_REG_INDIRECTTRIGGER 0x1C
-+
-+#define CQSPI_REG_REMAP 0x24
-+#define CQSPI_REG_MODE_BIT 0x28
-+
-+#define CQSPI_REG_SDRAMLEVEL 0x2C
-+#define CQSPI_REG_SDRAMLEVEL_RD_LSB 0
-+#define CQSPI_REG_SDRAMLEVEL_WR_LSB 16
-+#define CQSPI_REG_SDRAMLEVEL_RD_MASK 0xFFFF
-+#define CQSPI_REG_SDRAMLEVEL_WR_MASK 0xFFFF
-+
-+#define CQSPI_REG_IRQSTATUS 0x40
-+#define CQSPI_REG_IRQMASK 0x44
-+
-+#define CQSPI_REG_INDIRECTRD 0x60
-+#define CQSPI_REG_INDIRECTRD_START_MASK (1 << 0)
-+#define CQSPI_REG_INDIRECTRD_CANCEL_MASK (1 << 1)
-+#define CQSPI_REG_INDIRECTRD_INPROGRESS_MASK (1 << 2)
-+#define CQSPI_REG_INDIRECTRD_DONE_MASK (1 << 5)
-+
-+#define CQSPI_REG_INDIRECTRDWATERMARK 0x64
-+#define CQSPI_REG_INDIRECTRDSTARTADDR 0x68
-+#define CQSPI_REG_INDIRECTRDBYTES 0x6C
-+
-+#define CQSPI_REG_CMDCTRL 0x90
-+#define CQSPI_REG_CMDCTRL_EXECUTE_MASK (1 << 0)
-+#define CQSPI_REG_CMDCTRL_INPROGRESS_MASK (1 << 1)
-+#define CQSPI_REG_CMDCTRL_DUMMY_LSB 7
-+#define CQSPI_REG_CMDCTRL_WR_BYTES_LSB 12
-+#define CQSPI_REG_CMDCTRL_WR_EN_LSB 15
-+#define CQSPI_REG_CMDCTRL_ADD_BYTES_LSB 16
-+#define CQSPI_REG_CMDCTRL_ADDR_EN_LSB 19
-+#define CQSPI_REG_CMDCTRL_RD_BYTES_LSB 20
-+#define CQSPI_REG_CMDCTRL_RD_EN_LSB 23
-+#define CQSPI_REG_CMDCTRL_OPCODE_LSB 24
-+#define CQSPI_REG_CMDCTRL_DUMMY_MASK 0x1F
-+#define CQSPI_REG_CMDCTRL_WR_BYTES_MASK 0x7
-+#define CQSPI_REG_CMDCTRL_ADD_BYTES_MASK 0x3
-+#define CQSPI_REG_CMDCTRL_RD_BYTES_MASK 0x7
-+#define CQSPI_REG_CMDCTRL_OPCODE_MASK 0xFF
-+
-+#define CQSPI_REG_INDIRECTWR 0x70
-+#define CQSPI_REG_INDIRECTWR_START_MASK (1 << 0)
-+#define CQSPI_REG_INDIRECTWR_CANCEL_MASK (1 << 1)
-+#define CQSPI_REG_INDIRECTWR_INPROGRESS_MASK (1 << 2)
-+#define CQSPI_REG_INDIRECTWR_DONE_MASK (1 << 5)
-+
-+#define CQSPI_REG_INDIRECTWRWATERMARK 0x74
-+#define CQSPI_REG_INDIRECTWRSTARTADDR 0x78
-+#define CQSPI_REG_INDIRECTWRBYTES 0x7C
-+
-+#define CQSPI_REG_CMDADDRESS 0x94
-+#define CQSPI_REG_CMDREADDATALOWER 0xA0
-+#define CQSPI_REG_CMDREADDATAUPPER 0xA4
-+#define CQSPI_REG_CMDWRITEDATALOWER 0xA8
-+#define CQSPI_REG_CMDWRITEDATAUPPER 0xAC
-+
-+#define CQSPI_REG_IS_IDLE(base) \
-+ ((readl(base + CQSPI_REG_CONFIG) >> \
-+ CQSPI_REG_CONFIG_IDLE_LSB) & 0x1)
-+
-+#define CQSPI_CAL_DELAY(tdelay_ns, tref_ns, tsclk_ns) \
-+ ((((tdelay_ns) - (tsclk_ns)) / (tref_ns)))
-+
-+#define CQSPI_GET_RD_SRAM_LEVEL(reg_base) \
-+ (((readl(reg_base + CQSPI_REG_SDRAMLEVEL)) >> \
-+ CQSPI_REG_SDRAMLEVEL_RD_LSB) & CQSPI_REG_SDRAMLEVEL_RD_MASK)
-+
-+#define CQSPI_GET_WR_SRAM_LEVEL(reg_base) \
-+ (((readl(reg_base + CQSPI_REG_SDRAMLEVEL)) >> \
-+ CQSPI_REG_SDRAMLEVEL_WR_LSB) & CQSPI_REG_SDRAMLEVEL_WR_MASK)
-+
-+static unsigned int cadence_qspi_apb_cmd2addr(const unsigned char *addr_buf,
-+ unsigned int addr_width)
-+{
-+ unsigned int addr;
-+
-+ addr = (addr_buf[0] << 16) | (addr_buf[1] << 8) | addr_buf[2];
-+
-+ if (addr_width == 4)
-+ addr = (addr << 8) | addr_buf[3];
-+
-+ return addr;
-+}
-+
-+static void cadence_qspi_apb_read_fifo_data(void *dest,
-+ const void *src_ahb_addr, unsigned int bytes)
-+{
-+ unsigned int temp;
-+ int remaining = bytes;
-+ unsigned int *dest_ptr = (unsigned int *)dest;
-+ unsigned int *src_ptr = (unsigned int *)src_ahb_addr;
-+
-+ while (remaining > 0) {
-+ if (remaining >= CQSPI_FIFO_WIDTH) {
-+ *dest_ptr = readl(src_ptr);
-+ remaining -= CQSPI_FIFO_WIDTH;
-+ } else {
-+ /* dangling bytes */
-+ temp = readl(src_ptr);
-+ memcpy(dest_ptr, &temp, remaining);
-+ break;
-+ }
-+ dest_ptr++;
-+ }
-+
-+ return;
-+}
-+
-+static void cadence_qspi_apb_write_fifo_data(const void *dest_ahb_addr,
-+ const void *src, unsigned int bytes)
-+{
-+ unsigned int temp;
-+ int remaining = bytes;
-+ unsigned int *dest_ptr = (unsigned int *)dest_ahb_addr;
-+ unsigned int *src_ptr = (unsigned int *)src;
-+
-+ while (remaining > 0) {
-+ if (remaining >= CQSPI_FIFO_WIDTH) {
-+ writel(*src_ptr, dest_ptr);
-+ remaining -= sizeof(unsigned int);
-+ } else {
-+ /* dangling bytes */
-+ memcpy(&temp, src_ptr, remaining);
-+ writel(temp, dest_ptr);
-+ break;
-+ }
-+ src_ptr++;
-+ }
-+
-+ return;
-+}
-+
-+/* Read from SRAM FIFO with polling SRAM fill level. */
-+static int qspi_read_sram_fifo_poll(const void *reg_base, void *dest_addr,
-+ const void *src_addr, unsigned int num_bytes)
-+{
-+ unsigned int remaining = num_bytes;
-+ unsigned int retry;
-+ unsigned int sram_level = 0;
-+ unsigned char *dest = (unsigned char *)dest_addr;
-+
-+ while (remaining > 0) {
-+ retry = CQSPI_REG_RETRY;
-+ while (retry--) {
-+ sram_level = CQSPI_GET_RD_SRAM_LEVEL(reg_base);
-+ if (sram_level)
-+ break;
-+ udelay(1);
-+ }
-+
-+ if (!retry) {
-+ printf("QSPI: No receive data after polling for %d times\n",
-+ CQSPI_REG_RETRY);
-+ return -1;
-+ }
-+
-+ sram_level *= CQSPI_FIFO_WIDTH;
-+ sram_level = sram_level > remaining ? remaining : sram_level;
-+
-+ /* Read data from FIFO. */
-+ cadence_qspi_apb_read_fifo_data(dest, src_addr, sram_level);
-+ dest += sram_level;
-+ remaining -= sram_level;
-+ udelay(1);
-+ }
-+ return 0;
-+}
-+
-+/* Write to SRAM FIFO with polling SRAM fill level. */
-+static int qpsi_write_sram_fifo_push(struct cadence_spi_platdata *plat,
-+ const void *src_addr, unsigned int num_bytes)
-+{
-+ const void *reg_base = plat->regbase;
-+ void *dest_addr = plat->ahbbase;
-+ unsigned int retry = CQSPI_REG_RETRY;
-+ unsigned int sram_level;
-+ unsigned int wr_bytes;
-+ unsigned char *src = (unsigned char *)src_addr;
-+ int remaining = num_bytes;
-+ unsigned int page_size = plat->page_size;
-+ unsigned int sram_threshold_words = CQSPI_REG_SRAM_THRESHOLD_WORDS;
-+
-+ while (remaining > 0) {
-+ retry = CQSPI_REG_RETRY;
-+ while (retry--) {
-+ sram_level = CQSPI_GET_WR_SRAM_LEVEL(reg_base);
-+ if (sram_level <= sram_threshold_words)
-+ break;
-+ }
-+ if (!retry) {
-+ printf("QSPI: SRAM fill level (0x%08x) not hit lower expected level (0x%08x)",
-+ sram_level, sram_threshold_words);
-+ return -1;
-+ }
-+ /* Write a page or remaining bytes. */
-+ wr_bytes = (remaining > page_size) ?
-+ page_size : remaining;
-+
-+ cadence_qspi_apb_write_fifo_data(dest_addr, src, wr_bytes);
-+ src += wr_bytes;
-+ remaining -= wr_bytes;
-+ }
-+
-+ return 0;
-+}
-+
-+void cadence_qspi_apb_controller_enable(void *reg_base)
-+{
-+ unsigned int reg;
-+ reg = readl(reg_base + CQSPI_REG_CONFIG);
-+ reg |= CQSPI_REG_CONFIG_ENABLE_MASK;
-+ writel(reg, reg_base + CQSPI_REG_CONFIG);
-+ return;
-+}
-+
-+void cadence_qspi_apb_controller_disable(void *reg_base)
-+{
-+ unsigned int reg;
-+ reg = readl(reg_base + CQSPI_REG_CONFIG);
-+ reg &= ~CQSPI_REG_CONFIG_ENABLE_MASK;
-+ writel(reg, reg_base + CQSPI_REG_CONFIG);
-+ return;
-+}
-+
-+/* Return 1 if idle, otherwise return 0 (busy). */
-+static unsigned int cadence_qspi_wait_idle(void *reg_base)
-+{
-+ unsigned int start, count = 0;
-+ /* timeout in unit of ms */
-+ unsigned int timeout = 5000;
-+
-+ start = get_timer(0);
-+ for ( ; get_timer(start) < timeout ; ) {
-+ if (CQSPI_REG_IS_IDLE(reg_base))
-+ count++;
-+ else
-+ count = 0;
-+ /*
-+ * Ensure the QSPI controller is in true idle state after
-+ * reading back the same idle status consecutively
-+ */
-+ if (count >= CQSPI_POLL_IDLE_RETRY)
-+ return 1;
-+ }
-+
-+ /* Timeout, still in busy mode. */
-+ printf("QSPI: QSPI is still busy after poll for %d times.\n",
-+ CQSPI_REG_RETRY);
-+ return 0;
-+}
-+
-+void cadence_qspi_apb_readdata_capture(void *reg_base,
-+ unsigned int bypass, unsigned int delay)
-+{
-+ unsigned int reg;
-+ cadence_qspi_apb_controller_disable(reg_base);
-+
-+ reg = readl(reg_base + CQSPI_READLCAPTURE);
-+
-+ if (bypass)
-+ reg |= (1 << CQSPI_READLCAPTURE_BYPASS_LSB);
-+ else
-+ reg &= ~(1 << CQSPI_READLCAPTURE_BYPASS_LSB);
-+
-+ reg &= ~(CQSPI_READLCAPTURE_DELAY_MASK
-+ << CQSPI_READLCAPTURE_DELAY_LSB);
-+
-+ reg |= ((delay & CQSPI_READLCAPTURE_DELAY_MASK)
-+ << CQSPI_READLCAPTURE_DELAY_LSB);
-+
-+ writel(reg, reg_base + CQSPI_READLCAPTURE);
-+
-+ cadence_qspi_apb_controller_enable(reg_base);
-+ return;
-+}
-+
-+void cadence_qspi_apb_config_baudrate_div(void *reg_base,
-+ unsigned int ref_clk_hz, unsigned int sclk_hz)
-+{
-+ unsigned int reg;
-+ unsigned int div;
-+
-+ cadence_qspi_apb_controller_disable(reg_base);
-+ reg = readl(reg_base + CQSPI_REG_CONFIG);
-+ reg &= ~(CQSPI_REG_CONFIG_BAUD_MASK << CQSPI_REG_CONFIG_BAUD_LSB);
-+
-+ div = ref_clk_hz / sclk_hz;
-+
-+ if (div > 32)
-+ div = 32;
-+
-+ /* Check if even number. */
-+ if ((div & 1)) {
-+ div = (div / 2);
-+ } else {
-+ if (ref_clk_hz % sclk_hz)
-+ /* ensure generated SCLK doesn't exceed user
-+ specified sclk_hz */
-+ div = (div / 2);
-+ else
-+ div = (div / 2) - 1;
-+ }
-+
-+ debug("%s: ref_clk %dHz sclk %dHz Div 0x%x\n", __func__,
-+ ref_clk_hz, sclk_hz, div);
-+
-+ div = (div & CQSPI_REG_CONFIG_BAUD_MASK) << CQSPI_REG_CONFIG_BAUD_LSB;
-+ reg |= div;
-+ writel(reg, reg_base + CQSPI_REG_CONFIG);
-+
-+ cadence_qspi_apb_controller_enable(reg_base);
-+ return;
-+}
-+
-+void cadence_qspi_apb_set_clk_mode(void *reg_base,
-+ unsigned int clk_pol, unsigned int clk_pha)
-+{
-+ unsigned int reg;
-+
-+ cadence_qspi_apb_controller_disable(reg_base);
-+ reg = readl(reg_base + CQSPI_REG_CONFIG);
-+ reg &= ~(1 <<
-+ (CQSPI_REG_CONFIG_CLK_POL_LSB | CQSPI_REG_CONFIG_CLK_PHA_LSB));
-+
-+ reg |= ((clk_pol & 0x1) << CQSPI_REG_CONFIG_CLK_POL_LSB);
-+ reg |= ((clk_pha & 0x1) << CQSPI_REG_CONFIG_CLK_PHA_LSB);
-+
-+ writel(reg, reg_base + CQSPI_REG_CONFIG);
-+
-+ cadence_qspi_apb_controller_enable(reg_base);
-+ return;
-+}
-+
-+void cadence_qspi_apb_chipselect(void *reg_base,
-+ unsigned int chip_select, unsigned int decoder_enable)
-+{
-+ unsigned int reg;
-+
-+ cadence_qspi_apb_controller_disable(reg_base);
-+
-+ debug("%s : chipselect %d decode %d\n", __func__, chip_select,
-+ decoder_enable);
-+
-+ reg = readl(reg_base + CQSPI_REG_CONFIG);
-+ /* docoder */
-+ if (decoder_enable) {
-+ reg |= CQSPI_REG_CONFIG_DECODE_MASK;
-+ } else {
-+ reg &= ~CQSPI_REG_CONFIG_DECODE_MASK;
-+ /* Convert CS if without decoder.
-+ * CS0 to 4b'1110
-+ * CS1 to 4b'1101
-+ * CS2 to 4b'1011
-+ * CS3 to 4b'0111
-+ */
-+ chip_select = 0xF & ~(1 << chip_select);
-+ }
-+
-+ reg &= ~(CQSPI_REG_CONFIG_CHIPSELECT_MASK
-+ << CQSPI_REG_CONFIG_CHIPSELECT_LSB);
-+ reg |= (chip_select & CQSPI_REG_CONFIG_CHIPSELECT_MASK)
-+ << CQSPI_REG_CONFIG_CHIPSELECT_LSB;
-+ writel(reg, reg_base + CQSPI_REG_CONFIG);
-+
-+ cadence_qspi_apb_controller_enable(reg_base);
-+ return;
-+}
-+
-+void cadence_qspi_apb_delay(void *reg_base,
-+ unsigned int ref_clk, unsigned int sclk_hz,
-+ unsigned int tshsl_ns, unsigned int tsd2d_ns,
-+ unsigned int tchsh_ns, unsigned int tslch_ns)
-+{
-+ unsigned int ref_clk_ns;
-+ unsigned int sclk_ns;
-+ unsigned int tshsl, tchsh, tslch, tsd2d;
-+ unsigned int reg;
-+
-+ cadence_qspi_apb_controller_disable(reg_base);
-+
-+ /* Convert to ns. */
-+ ref_clk_ns = (1000000000) / ref_clk;
-+
-+ /* Convert to ns. */
-+ sclk_ns = (1000000000) / sclk_hz;
-+
-+ /* Plus 1 to round up 1 clock cycle. */
-+ tshsl = CQSPI_CAL_DELAY(tshsl_ns, ref_clk_ns, sclk_ns) + 1;
-+ tchsh = CQSPI_CAL_DELAY(tchsh_ns, ref_clk_ns, sclk_ns) + 1;
-+ tslch = CQSPI_CAL_DELAY(tslch_ns, ref_clk_ns, sclk_ns) + 1;
-+ tsd2d = CQSPI_CAL_DELAY(tsd2d_ns, ref_clk_ns, sclk_ns) + 1;
-+
-+ reg = ((tshsl & CQSPI_REG_DELAY_TSHSL_MASK)
-+ << CQSPI_REG_DELAY_TSHSL_LSB);
-+ reg |= ((tchsh & CQSPI_REG_DELAY_TCHSH_MASK)
-+ << CQSPI_REG_DELAY_TCHSH_LSB);
-+ reg |= ((tslch & CQSPI_REG_DELAY_TSLCH_MASK)
-+ << CQSPI_REG_DELAY_TSLCH_LSB);
-+ reg |= ((tsd2d & CQSPI_REG_DELAY_TSD2D_MASK)
-+ << CQSPI_REG_DELAY_TSD2D_LSB);
-+ writel(reg, reg_base + CQSPI_REG_DELAY);
-+
-+ cadence_qspi_apb_controller_enable(reg_base);
-+ return;
-+}
-+
-+void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat)
-+{
-+ unsigned reg;
-+
-+ cadence_qspi_apb_controller_disable(plat->regbase);
-+
-+ /* Configure the device size and address bytes */
-+ reg = readl(plat->regbase + CQSPI_REG_SIZE);
-+ /* Clear the previous value */
-+ reg &= ~(CQSPI_REG_SIZE_PAGE_MASK << CQSPI_REG_SIZE_PAGE_LSB);
-+ reg &= ~(CQSPI_REG_SIZE_BLOCK_MASK << CQSPI_REG_SIZE_BLOCK_LSB);
-+ reg |= (plat->page_size << CQSPI_REG_SIZE_PAGE_LSB);
-+ reg |= (plat->block_size << CQSPI_REG_SIZE_BLOCK_LSB);
-+ writel(reg, plat->regbase + CQSPI_REG_SIZE);
-+
-+ /* Configure the remap address register, no remap */
-+ writel(0, plat->regbase + CQSPI_REG_REMAP);
-+
-+ /* Disable all interrupts */
-+ writel(0, plat->regbase + CQSPI_REG_IRQMASK);
-+
-+ cadence_qspi_apb_controller_enable(plat->regbase);
-+ return;
-+}
-+
-+static int cadence_qspi_apb_exec_flash_cmd(void *reg_base,
-+ unsigned int reg)
-+{
-+ unsigned int retry = CQSPI_REG_RETRY;
-+
-+ /* Write the CMDCTRL without start execution. */
-+ writel(reg, reg_base + CQSPI_REG_CMDCTRL);
-+ /* Start execute */
-+ reg |= CQSPI_REG_CMDCTRL_EXECUTE_MASK;
-+ writel(reg, reg_base + CQSPI_REG_CMDCTRL);
-+
-+ while (retry--) {
-+ reg = readl(reg_base + CQSPI_REG_CMDCTRL);
-+ if ((reg & CQSPI_REG_CMDCTRL_INPROGRESS_MASK) == 0)
-+ break;
-+ udelay(1);
-+ }
-+
-+ if (!retry) {
-+ printf("QSPI: flash command execution timeout\n");
-+ return -EIO;
-+ }
-+
-+ /* Polling QSPI idle status. */
-+ if (!cadence_qspi_wait_idle(reg_base))
-+ return -EIO;
-+
-+ return 0;
-+}
-+
-+/* For command RDID, RDSR. */
-+int cadence_qspi_apb_command_read(void *reg_base,
-+ unsigned int cmdlen, const u8 *cmdbuf, unsigned int rxlen,
-+ u8 *rxbuf)
-+{
-+ unsigned int reg;
-+ unsigned int read_len;
-+ int status;
-+
-+ if (!cmdlen || rxlen > CQSPI_STIG_DATA_LEN_MAX || rxbuf == NULL) {
-+ printf("QSPI: Invalid input arguments cmdlen %d rxlen %d\n",
-+ cmdlen, rxlen);
-+ return -EINVAL;
-+ }
-+
-+ reg = cmdbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB;
-+
-+ reg |= (0x1 << CQSPI_REG_CMDCTRL_RD_EN_LSB);
-+
-+ /* 0 means 1 byte. */
-+ reg |= (((rxlen - 1) & CQSPI_REG_CMDCTRL_RD_BYTES_MASK)
-+ << CQSPI_REG_CMDCTRL_RD_BYTES_LSB);
-+ status = cadence_qspi_apb_exec_flash_cmd(reg_base, reg);
-+ if (status != 0)
-+ return status;
-+
-+ reg = readl(reg_base + CQSPI_REG_CMDREADDATALOWER);
-+
-+ /* Put the read value into rx_buf */
-+ read_len = (rxlen > 4) ? 4 : rxlen;
-+ memcpy(rxbuf, ®, read_len);
-+ rxbuf += read_len;
-+
-+ if (rxlen > 4) {
-+ reg = readl(reg_base + CQSPI_REG_CMDREADDATAUPPER);
-+
-+ read_len = rxlen - read_len;
-+ memcpy(rxbuf, ®, read_len);
-+ }
-+ return 0;
-+}
-+
-+/* For commands: WRSR, WREN, WRDI, CHIP_ERASE, BE, etc. */
-+int cadence_qspi_apb_command_write(void *reg_base, unsigned int cmdlen,
-+ const u8 *cmdbuf, unsigned int txlen, const u8 *txbuf)
-+{
-+ unsigned int reg = 0;
-+ unsigned int addr_value;
-+ unsigned int wr_data;
-+ unsigned int wr_len;
-+
-+ if (!cmdlen || cmdlen > 5 || txlen > 8 || cmdbuf == NULL) {
-+ printf("QSPI: Invalid input arguments cmdlen %d txlen %d\n",
-+ cmdlen, txlen);
-+ return -EINVAL;
-+ }
-+
-+ reg |= cmdbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB;
-+
-+ if (cmdlen == 4 || cmdlen == 5) {
-+ /* Command with address */
-+ reg |= (0x1 << CQSPI_REG_CMDCTRL_ADDR_EN_LSB);
-+ /* Number of bytes to write. */
-+ reg |= ((cmdlen - 2) & CQSPI_REG_CMDCTRL_ADD_BYTES_MASK)
-+ << CQSPI_REG_CMDCTRL_ADD_BYTES_LSB;
-+ /* Get address */
-+ addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1],
-+ cmdlen >= 5 ? 4 : 3);
-+
-+ writel(addr_value, reg_base + CQSPI_REG_CMDADDRESS);
-+ }
-+
-+ if (txlen) {
-+ /* writing data = yes */
-+ reg |= (0x1 << CQSPI_REG_CMDCTRL_WR_EN_LSB);
-+ reg |= ((txlen - 1) & CQSPI_REG_CMDCTRL_WR_BYTES_MASK)
-+ << CQSPI_REG_CMDCTRL_WR_BYTES_LSB;
-+
-+ wr_len = txlen > 4 ? 4 : txlen;
-+ memcpy(&wr_data, txbuf, wr_len);
-+ writel(wr_data, reg_base +
-+ CQSPI_REG_CMDWRITEDATALOWER);
-+
-+ if (txlen > 4) {
-+ txbuf += wr_len;
-+ wr_len = txlen - wr_len;
-+ memcpy(&wr_data, txbuf, wr_len);
-+ writel(wr_data, reg_base +
-+ CQSPI_REG_CMDWRITEDATAUPPER);
-+ }
-+ }
-+
-+ /* Execute the command */
-+ return cadence_qspi_apb_exec_flash_cmd(reg_base, reg);
-+}
-+
-+/* Opcode + Address (3/4 bytes) + dummy bytes (0-4 bytes) */
-+int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
-+ unsigned int cmdlen, const u8 *cmdbuf)
-+{
-+ unsigned int reg;
-+ unsigned int rd_reg;
-+ unsigned int addr_value;
-+ unsigned int dummy_clk;
-+ unsigned int dummy_bytes;
-+ unsigned int addr_bytes;
-+
-+ /*
-+ * Identify addr_byte. All NOR flash device drivers are using fast read
-+ * which always expecting 1 dummy byte, 1 cmd byte and 3/4 addr byte.
-+ * With that, the length is in value of 5 or 6. Only FRAM chip from
-+ * ramtron using normal read (which won't need dummy byte).
-+ * Unlikely NOR flash using normal read due to performance issue.
-+ */
-+ if (cmdlen >= 5)
-+ /* to cater fast read where cmd + addr + dummy */
-+ addr_bytes = cmdlen - 2;
-+ else
-+ /* for normal read (only ramtron as of now) */
-+ addr_bytes = cmdlen - 1;
-+
-+ /* Setup the indirect trigger address */
-+ writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
-+ plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
-+
-+ /* Configure SRAM partition for read. */
-+ writel(CQSPI_REG_SRAM_PARTITION_RD, plat->regbase +
-+ CQSPI_REG_SRAMPARTITION);
-+
-+ /* Configure the opcode */
-+ rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB;
-+
-+#if (CONFIG_SPI_FLASH_QUAD == 1)
-+ /* Instruction and address at DQ0, data at DQ0-3. */
-+ rd_reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB;
-+#endif
-+
-+ /* Get address */
-+ addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes);
-+ writel(addr_value, plat->regbase + CQSPI_REG_INDIRECTRDSTARTADDR);
-+
-+ /* The remaining lenght is dummy bytes. */
-+ dummy_bytes = cmdlen - addr_bytes - 1;
-+ if (dummy_bytes) {
-+ if (dummy_bytes > CQSPI_DUMMY_BYTES_MAX)
-+ dummy_bytes = CQSPI_DUMMY_BYTES_MAX;
-+
-+ rd_reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB);
-+#if defined(CONFIG_SPL_SPI_XIP) && defined(CONFIG_SPL_BUILD)
-+ writel(0x0, plat->regbase + CQSPI_REG_MODE_BIT);
-+#else
-+ writel(0xFF, plat->regbase + CQSPI_REG_MODE_BIT);
-+#endif
-+
-+ /* Convert to clock cycles. */
-+ dummy_clk = dummy_bytes * CQSPI_DUMMY_CLKS_PER_BYTE;
-+ /* Need to minus the mode byte (8 clocks). */
-+ dummy_clk -= CQSPI_DUMMY_CLKS_PER_BYTE;
-+
-+ if (dummy_clk)
-+ rd_reg |= (dummy_clk & CQSPI_REG_RD_INSTR_DUMMY_MASK)
-+ << CQSPI_REG_RD_INSTR_DUMMY_LSB;
-+ }
-+
-+ writel(rd_reg, plat->regbase + CQSPI_REG_RD_INSTR);
-+
-+ /* set device size */
-+ reg = readl(plat->regbase + CQSPI_REG_SIZE);
-+ reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
-+ reg |= (addr_bytes - 1);
-+ writel(reg, plat->regbase + CQSPI_REG_SIZE);
-+ return 0;
-+}
-+
-+int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
-+ unsigned int rxlen, u8 *rxbuf)
-+{
-+ unsigned int reg;
-+
-+ writel(rxlen, plat->regbase + CQSPI_REG_INDIRECTRDBYTES);
-+
-+ /* Start the indirect read transfer */
-+ writel(CQSPI_REG_INDIRECTRD_START_MASK,
-+ plat->regbase + CQSPI_REG_INDIRECTRD);
-+
-+ if (qspi_read_sram_fifo_poll(plat->regbase, (void *)rxbuf,
-+ (const void *)plat->ahbbase, rxlen))
-+ goto failrd;
-+
-+ /* Check flash indirect controller */
-+ reg = readl(plat->regbase + CQSPI_REG_INDIRECTRD);
-+ if (!(reg & CQSPI_REG_INDIRECTRD_DONE_MASK)) {
-+ reg = readl(plat->regbase + CQSPI_REG_INDIRECTRD);
-+ printf("QSPI: indirect completion status error with reg 0x%08x\n",
-+ reg);
-+ goto failrd;
-+ }
-+
-+ /* Clear indirect completion status */
-+ writel(CQSPI_REG_INDIRECTRD_DONE_MASK,
-+ plat->regbase + CQSPI_REG_INDIRECTRD);
-+ return 0;
-+
-+failrd:
-+ /* Cancel the indirect read */
-+ writel(CQSPI_REG_INDIRECTRD_CANCEL_MASK,
-+ plat->regbase + CQSPI_REG_INDIRECTRD);
-+ return -1;
-+}
-+
-+/* Opcode + Address (3/4 bytes) */
-+int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
-+ unsigned int cmdlen, const u8 *cmdbuf)
-+{
-+ unsigned int reg;
-+ unsigned int addr_bytes = cmdlen > 4 ? 4 : 3;
-+
-+ if (cmdlen < 4 || cmdbuf == NULL) {
-+ printf("QSPI: iInvalid input argument, len %d cmdbuf 0x%08x\n",
-+ cmdlen, (unsigned int)cmdbuf);
-+ return -EINVAL;
-+ }
-+ /* Setup the indirect trigger address */
-+ writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
-+ plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
-+
-+ writel(CQSPI_REG_SRAM_PARTITION_WR,
-+ plat->regbase + CQSPI_REG_SRAMPARTITION);
-+
-+ /* Configure the opcode */
-+ reg = cmdbuf[0] << CQSPI_REG_WR_INSTR_OPCODE_LSB;
-+ writel(reg, plat->regbase + CQSPI_REG_WR_INSTR);
-+
-+ /* Setup write address. */
-+ reg = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes);
-+ writel(reg, plat->regbase + CQSPI_REG_INDIRECTWRSTARTADDR);
-+
-+ reg = readl(plat->regbase + CQSPI_REG_SIZE);
-+ reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
-+ reg |= (addr_bytes - 1);
-+ writel(reg, plat->regbase + CQSPI_REG_SIZE);
-+ return 0;
-+}
-+
-+int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
-+ unsigned int txlen, const u8 *txbuf)
-+{
-+ unsigned int reg = 0;
-+ unsigned int retry;
-+
-+ /* Configure the indirect read transfer bytes */
-+ writel(txlen, plat->regbase + CQSPI_REG_INDIRECTWRBYTES);
-+
-+ /* Start the indirect write transfer */
-+ writel(CQSPI_REG_INDIRECTWR_START_MASK,
-+ plat->regbase + CQSPI_REG_INDIRECTWR);
-+
-+ if (qpsi_write_sram_fifo_push(plat, (const void *)txbuf, txlen))
-+ goto failwr;
-+
-+ /* Wait until last write is completed (FIFO empty) */
-+ retry = CQSPI_REG_RETRY;
-+ while (retry--) {
-+ reg = CQSPI_GET_WR_SRAM_LEVEL(plat->regbase);
-+ if (reg == 0)
-+ break;
-+
-+ udelay(1);
-+ }
-+
-+ if (reg != 0) {
-+ printf("QSPI: timeout for indirect write\n");
-+ goto failwr;
-+ }
-+
-+ /* Check flash indirect controller status */
-+ retry = CQSPI_REG_RETRY;
-+ while (retry--) {
-+ reg = readl(plat->regbase + CQSPI_REG_INDIRECTWR);
-+ if (reg & CQSPI_REG_INDIRECTWR_DONE_MASK)
-+ break;
-+ udelay(1);
-+ }
-+
-+ if (!(reg & CQSPI_REG_INDIRECTWR_DONE_MASK)) {
-+ printf("QSPI: indirect completion status error with reg 0x%08x\n",
-+ reg);
-+ goto failwr;
-+ }
-+
-+ /* Clear indirect completion status */
-+ writel(CQSPI_REG_INDIRECTWR_DONE_MASK,
-+ plat->regbase + CQSPI_REG_INDIRECTWR);
-+ return 0;
-+
-+failwr:
-+ /* Cancel the indirect write */
-+ writel(CQSPI_REG_INDIRECTWR_CANCEL_MASK,
-+ plat->regbase + CQSPI_REG_INDIRECTWR);
-+ return -1;
-+}
-+
-+void cadence_qspi_apb_enter_xip(void *reg_base, char xip_dummy)
-+{
-+ unsigned int reg;
-+
-+ /* enter XiP mode immediately and enable direct mode */
-+ reg = readl(reg_base + CQSPI_REG_CONFIG);
-+ reg |= CQSPI_REG_CONFIG_ENABLE_MASK;
-+ reg |= CQSPI_REG_CONFIG_DIRECT_MASK;
-+ reg |= CQSPI_REG_CONFIG_XIP_IMM_MASK;
-+ writel(reg, reg_base + CQSPI_REG_CONFIG);
-+
-+ /* keep the XiP mode */
-+ writel(xip_dummy, reg_base + CQSPI_REG_MODE_BIT);
-+
-+ /* Enable mode bit at devrd */
-+ reg = readl(reg_base + CQSPI_REG_RD_INSTR);
-+ reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB);
-+ writel(reg, reg_base + CQSPI_REG_RD_INSTR);
-+}
-diff -ruN u-boot-2015.01-rc3/drivers/spi/cadence_qspi.c u-boot/drivers/spi/cadence_qspi.c
---- u-boot-2015.01-rc3/drivers/spi/cadence_qspi.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/spi/cadence_qspi.c 2015-01-01 17:34:32.701495908 +0100
-@@ -0,0 +1,345 @@
-+/*
-+ * Copyright (C) 2012
-+ * Altera Corporation <www.altera.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <fdtdec.h>
-+#include <malloc.h>
-+#include <spi.h>
-+#include <asm/errno.h>
-+#include "cadence_qspi.h"
-+
-+#define CQSPI_STIG_READ 0
-+#define CQSPI_STIG_WRITE 1
-+#define CQSPI_INDIRECT_READ 2
-+#define CQSPI_INDIRECT_WRITE 3
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+static int cadence_spi_write_speed(struct udevice *bus, uint hz)
-+{
-+ struct cadence_spi_platdata *plat = bus->platdata;
-+ struct cadence_spi_priv *priv = dev_get_priv(bus);
-+
-+ cadence_qspi_apb_config_baudrate_div(priv->regbase,
-+ CONFIG_CQSPI_REF_CLK, hz);
-+
-+ /* Reconfigure delay timing if speed is changed. */
-+ cadence_qspi_apb_delay(priv->regbase, CONFIG_CQSPI_REF_CLK, hz,
-+ plat->tshsl_ns, plat->tsd2d_ns,
-+ plat->tchsh_ns, plat->tslch_ns);
-+
-+ return 0;
-+}
-+
-+/* Calibration sequence to determine the read data capture delay register */
-+static int spi_calibration(struct udevice *bus)
-+{
-+ struct cadence_spi_platdata *plat = bus->platdata;
-+ struct cadence_spi_priv *priv = dev_get_priv(bus);
-+ void *base = priv->regbase;
-+ u8 opcode_rdid = 0x9F;
-+ unsigned int idcode = 0, temp = 0;
-+ int err = 0, i, range_lo = -1, range_hi = -1;
-+
-+ /* start with slowest clock (1 MHz) */
-+ cadence_spi_write_speed(bus, 1000000);
-+
-+ /* configure the read data capture delay register to 0 */
-+ cadence_qspi_apb_readdata_capture(base, 1, 0);
-+
-+ /* Enable QSPI */
-+ cadence_qspi_apb_controller_enable(base);
-+
-+ /* read the ID which will be our golden value */
-+ err = cadence_qspi_apb_command_read(base, 1, &opcode_rdid,
-+ 3, (u8 *)&idcode);
-+ if (err) {
-+ puts("SF: Calibration failed (read)\n");
-+ return err;
-+ }
-+
-+ /* use back the intended clock and find low range */
-+ cadence_spi_write_speed(bus, plat->max_hz);
-+ for (i = 0; i < CQSPI_READ_CAPTURE_MAX_DELAY; i++) {
-+ /* Disable QSPI */
-+ cadence_qspi_apb_controller_disable(base);
-+
-+ /* reconfigure the read data capture delay register */
-+ cadence_qspi_apb_readdata_capture(base, 1, i);
-+
-+ /* Enable back QSPI */
-+ cadence_qspi_apb_controller_enable(base);
-+
-+ /* issue a RDID to get the ID value */
-+ err = cadence_qspi_apb_command_read(base, 1, &opcode_rdid,
-+ 3, (u8 *)&temp);
-+ if (err) {
-+ puts("SF: Calibration failed (read)\n");
-+ return err;
-+ }
-+
-+ /* search for range lo */
-+ if (range_lo == -1 && temp == idcode) {
-+ range_lo = i;
-+ continue;
-+ }
-+
-+ /* search for range hi */
-+ if (range_lo != -1 && temp != idcode) {
-+ range_hi = i - 1;
-+ break;
-+ }
-+ range_hi = i;
-+ }
-+
-+ if (range_lo == -1) {
-+ puts("SF: Calibration failed (low range)\n");
-+ return err;
-+ }
-+
-+ /* Disable QSPI for subsequent initialization */
-+ cadence_qspi_apb_controller_disable(base);
-+
-+ /* configure the final value for read data capture delay register */
-+ cadence_qspi_apb_readdata_capture(base, 1, (range_hi + range_lo) / 2);
-+ debug("SF: Read data capture delay calibrated to %i (%i - %i)\n",
-+ (range_hi + range_lo) / 2, range_lo, range_hi);
-+
-+ /* just to ensure we do once only when speed or chip select change */
-+ priv->qspi_calibrated_hz = plat->max_hz;
-+ priv->qspi_calibrated_cs = spi_chip_select(bus);
-+
-+ return 0;
-+}
-+
-+static int cadence_spi_set_speed(struct udevice *bus, uint hz)
-+{
-+ struct cadence_spi_platdata *plat = bus->platdata;
-+ struct cadence_spi_priv *priv = dev_get_priv(bus);
-+ int err;
-+
-+ /* Disable QSPI */
-+ cadence_qspi_apb_controller_disable(priv->regbase);
-+
-+ cadence_spi_write_speed(bus, hz);
-+
-+ /* Calibration required for different SCLK speed or chip select */
-+ if (priv->qspi_calibrated_hz != plat->max_hz ||
-+ priv->qspi_calibrated_cs != spi_chip_select(bus)) {
-+ err = spi_calibration(bus);
-+ if (err)
-+ return err;
-+ }
-+
-+ /* Enable QSPI */
-+ cadence_qspi_apb_controller_enable(priv->regbase);
-+
-+ debug("%s: speed=%d\n", __func__, hz);
-+
-+ return 0;
-+}
-+
-+static int cadence_spi_probe(struct udevice *bus)
-+{
-+ struct cadence_spi_platdata *plat = bus->platdata;
-+ struct cadence_spi_priv *priv = dev_get_priv(bus);
-+
-+ priv->regbase = plat->regbase;
-+ priv->ahbbase = plat->ahbbase;
-+
-+ if (!priv->qspi_is_init) {
-+ cadence_qspi_apb_controller_init(plat);
-+ priv->qspi_is_init = 1;
-+ }
-+
-+ return 0;
-+}
-+
-+static int cadence_spi_set_mode(struct udevice *bus, uint mode)
-+{
-+ struct cadence_spi_priv *priv = dev_get_priv(bus);
-+ unsigned int clk_pol = (mode & SPI_CPOL) ? 1 : 0;
-+ unsigned int clk_pha = (mode & SPI_CPHA) ? 1 : 0;
-+
-+ /* Disable QSPI */
-+ cadence_qspi_apb_controller_disable(priv->regbase);
-+
-+ /* Set SPI mode */
-+ cadence_qspi_apb_set_clk_mode(priv->regbase, clk_pol, clk_pha);
-+
-+ /* Enable QSPI */
-+ cadence_qspi_apb_controller_enable(priv->regbase);
-+
-+ return 0;
-+}
-+
-+static int cadence_spi_xfer(struct udevice *dev, unsigned int bitlen,
-+ const void *dout, void *din, unsigned long flags)
-+{
-+ struct udevice *bus = dev->parent;
-+ struct cadence_spi_platdata *plat = bus->platdata;
-+ struct cadence_spi_priv *priv = dev_get_priv(bus);
-+ void *base = priv->regbase;
-+ u8 *cmd_buf = priv->cmd_buf;
-+ size_t data_bytes;
-+ int err = 0;
-+ u32 mode = CQSPI_STIG_WRITE;
-+
-+ if (flags & SPI_XFER_BEGIN) {
-+ /* copy command to local buffer */
-+ priv->cmd_len = bitlen / 8;
-+ memcpy(cmd_buf, dout, priv->cmd_len);
-+ }
-+
-+ if (flags == (SPI_XFER_BEGIN | SPI_XFER_END)) {
-+ /* if start and end bit are set, the data bytes is 0. */
-+ data_bytes = 0;
-+ } else {
-+ data_bytes = bitlen / 8;
-+ }
-+ debug("%s: len=%d [bytes]\n", __func__, data_bytes);
-+
-+ /* Set Chip select */
-+ cadence_qspi_apb_chipselect(base, spi_chip_select(dev),
-+ CONFIG_CQSPI_DECODER);
-+
-+ if ((flags & SPI_XFER_END) || (flags == 0)) {
-+ if (priv->cmd_len == 0) {
-+ printf("QSPI: Error, command is empty.\n");
-+ return -1;
-+ }
-+
-+ if (din && data_bytes) {
-+ /* read */
-+ /* Use STIG if no address. */
-+ if (!CQSPI_IS_ADDR(priv->cmd_len))
-+ mode = CQSPI_STIG_READ;
-+ else
-+ mode = CQSPI_INDIRECT_READ;
-+ } else if (dout && !(flags & SPI_XFER_BEGIN)) {
-+ /* write */
-+ if (!CQSPI_IS_ADDR(priv->cmd_len))
-+ mode = CQSPI_STIG_WRITE;
-+ else
-+ mode = CQSPI_INDIRECT_WRITE;
-+ }
-+
-+ switch (mode) {
-+ case CQSPI_STIG_READ:
-+ err = cadence_qspi_apb_command_read(
-+ base, priv->cmd_len, cmd_buf,
-+ data_bytes, din);
-+
-+ break;
-+ case CQSPI_STIG_WRITE:
-+ err = cadence_qspi_apb_command_write(base,
-+ priv->cmd_len, cmd_buf,
-+ data_bytes, dout);
-+ break;
-+ case CQSPI_INDIRECT_READ:
-+ err = cadence_qspi_apb_indirect_read_setup(plat,
-+ priv->cmd_len, cmd_buf);
-+ if (!err) {
-+ err = cadence_qspi_apb_indirect_read_execute
-+ (plat, data_bytes, din);
-+ }
-+ break;
-+ case CQSPI_INDIRECT_WRITE:
-+ err = cadence_qspi_apb_indirect_write_setup
-+ (plat, priv->cmd_len, cmd_buf);
-+ if (!err) {
-+ err = cadence_qspi_apb_indirect_write_execute
-+ (plat, data_bytes, dout);
-+ }
-+ break;
-+ default:
-+ err = -1;
-+ break;
-+ }
-+
-+ if (flags & SPI_XFER_END) {
-+ /* clear command buffer */
-+ memset(cmd_buf, 0, sizeof(priv->cmd_buf));
-+ priv->cmd_len = 0;
-+ }
-+ }
-+
-+ return err;
-+}
-+
-+static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
-+{
-+ struct cadence_spi_platdata *plat = bus->platdata;
-+ const void *blob = gd->fdt_blob;
-+ int node = bus->of_offset;
-+ int subnode;
-+ u32 data[4];
-+ int ret;
-+
-+ /* 2 base addresses are needed, lets get them from the DT */
-+ ret = fdtdec_get_int_array(blob, node, "reg", data, ARRAY_SIZE(data));
-+ if (ret) {
-+ printf("Error: Can't get base addresses (ret=%d)!\n", ret);
-+ return -ENODEV;
-+ }
-+
-+ plat->regbase = (void *)data[0];
-+ plat->ahbbase = (void *)data[2];
-+
-+ /* Use 500KHz as a suitable default */
-+ plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
-+ 500000);
-+
-+ /* All other paramters are embedded in the child node */
-+ subnode = fdt_first_subnode(blob, node);
-+ if (!subnode) {
-+ printf("Error: subnode with SPI flash config missing!\n");
-+ return -ENODEV;
-+ }
-+
-+ /* Read other parameters from DT */
-+ plat->page_size = fdtdec_get_int(blob, subnode, "page-size", 256);
-+ plat->block_size = fdtdec_get_int(blob, subnode, "block-size", 16);
-+ plat->tshsl_ns = fdtdec_get_int(blob, subnode, "tshsl-ns", 200);
-+ plat->tsd2d_ns = fdtdec_get_int(blob, subnode, "tsd2d-ns", 255);
-+ plat->tchsh_ns = fdtdec_get_int(blob, subnode, "tchsh-ns", 20);
-+ plat->tslch_ns = fdtdec_get_int(blob, subnode, "tslch-ns", 20);
-+
-+ debug("%s: regbase=%p ahbbase=%p max-frequency=%d page-size=%d\n",
-+ __func__, plat->regbase, plat->ahbbase, plat->max_hz,
-+ plat->page_size);
-+
-+ return 0;
-+}
-+
-+static const struct dm_spi_ops cadence_spi_ops = {
-+ .xfer = cadence_spi_xfer,
-+ .set_speed = cadence_spi_set_speed,
-+ .set_mode = cadence_spi_set_mode,
-+ /*
-+ * cs_info is not needed, since we require all chip selects to be
-+ * in the device tree explicitly
-+ */
-+};
-+
-+static const struct udevice_id cadence_spi_ids[] = {
-+ { .compatible = "cadence,qspi" },
-+ { }
-+};
-+
-+U_BOOT_DRIVER(cadence_spi) = {
-+ .name = "cadence_spi",
-+ .id = UCLASS_SPI,
-+ .of_match = cadence_spi_ids,
-+ .ops = &cadence_spi_ops,
-+ .ofdata_to_platdata = cadence_spi_ofdata_to_platdata,
-+ .platdata_auto_alloc_size = sizeof(struct cadence_spi_platdata),
-+ .priv_auto_alloc_size = sizeof(struct cadence_spi_priv),
-+ .per_child_auto_alloc_size = sizeof(struct spi_slave),
-+ .probe = cadence_spi_probe,
-+};
-diff -ruN u-boot-2015.01-rc3/drivers/spi/cadence_qspi.h u-boot/drivers/spi/cadence_qspi.h
---- u-boot-2015.01-rc3/drivers/spi/cadence_qspi.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/spi/cadence_qspi.h 2015-01-01 17:34:32.701495908 +0100
-@@ -0,0 +1,76 @@
-+/*
-+ * Copyright (C) 2012
-+ * Altera Corporation <www.altera.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CADENCE_QSPI_H__
-+#define __CADENCE_QSPI_H__
-+
-+#define CQSPI_IS_ADDR(cmd_len) (cmd_len > 1 ? 1 : 0)
-+
-+#define CQSPI_NO_DECODER_MAX_CS 4
-+#define CQSPI_DECODER_MAX_CS 16
-+#define CQSPI_READ_CAPTURE_MAX_DELAY 16
-+
-+struct cadence_spi_platdata {
-+ unsigned int max_hz;
-+ void *regbase;
-+ void *ahbbase;
-+
-+ u32 page_size;
-+ u32 block_size;
-+ u32 tshsl_ns;
-+ u32 tsd2d_ns;
-+ u32 tchsh_ns;
-+ u32 tslch_ns;
-+};
-+
-+struct cadence_spi_priv {
-+ void *regbase;
-+ void *ahbbase;
-+ size_t cmd_len;
-+ u8 cmd_buf[32];
-+ size_t data_len;
-+
-+ int qspi_is_init;
-+ unsigned int qspi_calibrated_hz;
-+ unsigned int qspi_calibrated_cs;
-+};
-+
-+/* Functions call declaration */
-+void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat);
-+void cadence_qspi_apb_controller_enable(void *reg_base_addr);
-+void cadence_qspi_apb_controller_disable(void *reg_base_addr);
-+
-+int cadence_qspi_apb_command_read(void *reg_base_addr,
-+ unsigned int cmdlen, const u8 *cmdbuf, unsigned int rxlen, u8 *rxbuf);
-+int cadence_qspi_apb_command_write(void *reg_base_addr,
-+ unsigned int cmdlen, const u8 *cmdbuf,
-+ unsigned int txlen, const u8 *txbuf);
-+
-+int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
-+ unsigned int cmdlen, const u8 *cmdbuf);
-+int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
-+ unsigned int rxlen, u8 *rxbuf);
-+int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
-+ unsigned int cmdlen, const u8 *cmdbuf);
-+int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
-+ unsigned int txlen, const u8 *txbuf);
-+
-+void cadence_qspi_apb_chipselect(void *reg_base,
-+ unsigned int chip_select, unsigned int decoder_enable);
-+void cadence_qspi_apb_set_clk_mode(void *reg_base_addr,
-+ unsigned int clk_pol, unsigned int clk_pha);
-+void cadence_qspi_apb_config_baudrate_div(void *reg_base,
-+ unsigned int ref_clk_hz, unsigned int sclk_hz);
-+void cadence_qspi_apb_delay(void *reg_base,
-+ unsigned int ref_clk, unsigned int sclk_hz,
-+ unsigned int tshsl_ns, unsigned int tsd2d_ns,
-+ unsigned int tchsh_ns, unsigned int tslch_ns);
-+void cadence_qspi_apb_enter_xip(void *reg_base, char xip_dummy);
-+void cadence_qspi_apb_readdata_capture(void *reg_base,
-+ unsigned int bypass, unsigned int delay);
-+
-+#endif /* __CADENCE_QSPI_H__ */
-diff -ruN u-boot-2015.01-rc3/drivers/spi/designware_spi.c u-boot/drivers/spi/designware_spi.c
---- u-boot-2015.01-rc3/drivers/spi/designware_spi.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/drivers/spi/designware_spi.c 2015-01-01 17:34:32.701495908 +0100
-@@ -0,0 +1,426 @@
-+/*
-+ * Designware master SPI core controller driver
-+ *
-+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
-+ *
-+ * Very loosely based on the Linux driver:
-+ * drivers/spi/spi-dw.c, which is:
-+ * Copyright (c) 2009, Intel Corporation.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <errno.h>
-+#include <malloc.h>
-+#include <spi.h>
-+#include <fdtdec.h>
-+#include <linux/compat.h>
-+#include <asm/io.h>
-+#include <asm/arch/clock_manager.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+/* Register offsets */
-+#define DW_SPI_CTRL0 0x00
-+#define DW_SPI_CTRL1 0x04
-+#define DW_SPI_SSIENR 0x08
-+#define DW_SPI_MWCR 0x0c
-+#define DW_SPI_SER 0x10
-+#define DW_SPI_BAUDR 0x14
-+#define DW_SPI_TXFLTR 0x18
-+#define DW_SPI_RXFLTR 0x1c
-+#define DW_SPI_TXFLR 0x20
-+#define DW_SPI_RXFLR 0x24
-+#define DW_SPI_SR 0x28
-+#define DW_SPI_IMR 0x2c
-+#define DW_SPI_ISR 0x30
-+#define DW_SPI_RISR 0x34
-+#define DW_SPI_TXOICR 0x38
-+#define DW_SPI_RXOICR 0x3c
-+#define DW_SPI_RXUICR 0x40
-+#define DW_SPI_MSTICR 0x44
-+#define DW_SPI_ICR 0x48
-+#define DW_SPI_DMACR 0x4c
-+#define DW_SPI_DMATDLR 0x50
-+#define DW_SPI_DMARDLR 0x54
-+#define DW_SPI_IDR 0x58
-+#define DW_SPI_VERSION 0x5c
-+#define DW_SPI_DR 0x60
-+
-+/* Bit fields in CTRLR0 */
-+#define SPI_DFS_OFFSET 0
-+
-+#define SPI_FRF_OFFSET 4
-+#define SPI_FRF_SPI 0x0
-+#define SPI_FRF_SSP 0x1
-+#define SPI_FRF_MICROWIRE 0x2
-+#define SPI_FRF_RESV 0x3
-+
-+#define SPI_MODE_OFFSET 6
-+#define SPI_SCPH_OFFSET 6
-+#define SPI_SCOL_OFFSET 7
-+
-+#define SPI_TMOD_OFFSET 8
-+#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET)
-+#define SPI_TMOD_TR 0x0 /* xmit & recv */
-+#define SPI_TMOD_TO 0x1 /* xmit only */
-+#define SPI_TMOD_RO 0x2 /* recv only */
-+#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
-+
-+#define SPI_SLVOE_OFFSET 10
-+#define SPI_SRL_OFFSET 11
-+#define SPI_CFS_OFFSET 12
-+
-+/* Bit fields in SR, 7 bits */
-+#define SR_MASK 0x7f /* cover 7 bits */
-+#define SR_BUSY (1 << 0)
-+#define SR_TF_NOT_FULL (1 << 1)
-+#define SR_TF_EMPT (1 << 2)
-+#define SR_RF_NOT_EMPT (1 << 3)
-+#define SR_RF_FULL (1 << 4)
-+#define SR_TX_ERR (1 << 5)
-+#define SR_DCOL (1 << 6)
-+
-+#define RX_TIMEOUT 1000 /* timeout in ms */
-+
-+struct dw_spi_platdata {
-+ s32 frequency; /* Default clock frequency, -1 for none */
-+ void __iomem *regs;
-+};
-+
-+struct dw_spi_priv {
-+ void __iomem *regs;
-+ unsigned int freq; /* Default frequency */
-+ unsigned int mode;
-+
-+ int bits_per_word;
-+ u8 cs; /* chip select pin */
-+ u8 tmode; /* TR/TO/RO/EEPROM */
-+ u8 type; /* SPI/SSP/MicroWire */
-+ int len;
-+
-+ u32 fifo_len; /* depth of the FIFO buffer */
-+ void *tx;
-+ void *tx_end;
-+ void *rx;
-+ void *rx_end;
-+};
-+
-+static inline u32 dw_readl(struct dw_spi_priv *priv, u32 offset)
-+{
-+ return __raw_readl(priv->regs + offset);
-+}
-+
-+static inline void dw_writel(struct dw_spi_priv *priv, u32 offset, u32 val)
-+{
-+ __raw_writel(val, priv->regs + offset);
-+}
-+
-+static inline u16 dw_readw(struct dw_spi_priv *priv, u32 offset)
-+{
-+ return __raw_readw(priv->regs + offset);
-+}
-+
-+static inline void dw_writew(struct dw_spi_priv *priv, u32 offset, u16 val)
-+{
-+ __raw_writew(val, priv->regs + offset);
-+}
-+
-+static int dw_spi_ofdata_to_platdata(struct udevice *bus)
-+{
-+ struct dw_spi_platdata *plat = bus->platdata;
-+ const void *blob = gd->fdt_blob;
-+ int node = bus->of_offset;
-+
-+ plat->regs = (struct dw_spi *)fdtdec_get_addr(blob, node, "reg");
-+
-+ /* Use 500KHz as a suitable default */
-+ plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
-+ 500000);
-+ debug("%s: regs=%p max-frequency=%d\n", __func__, plat->regs,
-+ plat->frequency);
-+
-+ return 0;
-+}
-+
-+static inline void spi_enable_chip(struct dw_spi_priv *priv, int enable)
-+{
-+ dw_writel(priv, DW_SPI_SSIENR, (enable ? 1 : 0));
-+}
-+
-+/* Restart the controller, disable all interrupts, clean rx fifo */
-+static void spi_hw_init(struct dw_spi_priv *priv)
-+{
-+ spi_enable_chip(priv, 0);
-+ dw_writel(priv, DW_SPI_IMR, 0xff);
-+ spi_enable_chip(priv, 1);
-+
-+ /*
-+ * Try to detect the FIFO depth if not set by interface driver,
-+ * the depth could be from 2 to 256 from HW spec
-+ */
-+ if (!priv->fifo_len) {
-+ u32 fifo;
-+
-+ for (fifo = 2; fifo <= 257; fifo++) {
-+ dw_writew(priv, DW_SPI_TXFLTR, fifo);
-+ if (fifo != dw_readw(priv, DW_SPI_TXFLTR))
-+ break;
-+ }
-+
-+ priv->fifo_len = (fifo == 257) ? 0 : fifo;
-+ dw_writew(priv, DW_SPI_TXFLTR, 0);
-+ }
-+ debug("%s: fifo_len=%d\n", __func__, priv->fifo_len);
-+}
-+
-+static int dw_spi_probe(struct udevice *bus)
-+{
-+ struct dw_spi_platdata *plat = dev_get_platdata(bus);
-+ struct dw_spi_priv *priv = dev_get_priv(bus);
-+
-+ priv->regs = plat->regs;
-+ priv->freq = plat->frequency;
-+
-+ /* Currently only bits_per_word == 8 supported */
-+ priv->bits_per_word = 8;
-+
-+ priv->tmode = 0; /* Tx & Rx */
-+
-+ /* Basic HW init */
-+ spi_hw_init(priv);
-+
-+ return 0;
-+}
-+
-+/* Return the max entries we can fill into tx fifo */
-+static inline u32 tx_max(struct dw_spi_priv *priv)
-+{
-+ u32 tx_left, tx_room, rxtx_gap;
-+
-+ tx_left = (priv->tx_end - priv->tx) / (priv->bits_per_word >> 3);
-+ tx_room = priv->fifo_len - dw_readw(priv, DW_SPI_TXFLR);
-+
-+ /*
-+ * Another concern is about the tx/rx mismatch, we
-+ * thought about using (priv->fifo_len - rxflr - txflr) as
-+ * one maximum value for tx, but it doesn't cover the
-+ * data which is out of tx/rx fifo and inside the
-+ * shift registers. So a control from sw point of
-+ * view is taken.
-+ */
-+ rxtx_gap = ((priv->rx_end - priv->rx) - (priv->tx_end - priv->tx)) /
-+ (priv->bits_per_word >> 3);
-+
-+ return min3(tx_left, tx_room, (u32)(priv->fifo_len - rxtx_gap));
-+}
-+
-+/* Return the max entries we should read out of rx fifo */
-+static inline u32 rx_max(struct dw_spi_priv *priv)
-+{
-+ u32 rx_left = (priv->rx_end - priv->rx) / (priv->bits_per_word >> 3);
-+
-+ return min_t(u32, rx_left, dw_readw(priv, DW_SPI_RXFLR));
-+}
-+
-+static void dw_writer(struct dw_spi_priv *priv)
-+{
-+ u32 max = tx_max(priv);
-+ u16 txw = 0;
-+
-+ while (max--) {
-+ /* Set the tx word if the transfer's original "tx" is not null */
-+ if (priv->tx_end - priv->len) {
-+ if (priv->bits_per_word == 8)
-+ txw = *(u8 *)(priv->tx);
-+ else
-+ txw = *(u16 *)(priv->tx);
-+ }
-+ dw_writew(priv, DW_SPI_DR, txw);
-+ debug("%s: tx=0x%02x\n", __func__, txw);
-+ priv->tx += priv->bits_per_word >> 3;
-+ }
-+}
-+
-+static int dw_reader(struct dw_spi_priv *priv)
-+{
-+ unsigned start = get_timer(0);
-+ u32 max;
-+ u16 rxw;
-+
-+ /* Wait for rx data to be ready */
-+ while (rx_max(priv) == 0) {
-+ if (get_timer(start) > RX_TIMEOUT)
-+ return -ETIMEDOUT;
-+ }
-+
-+ max = rx_max(priv);
-+
-+ while (max--) {
-+ rxw = dw_readw(priv, DW_SPI_DR);
-+ debug("%s: rx=0x%02x\n", __func__, rxw);
-+
-+ /*
-+ * Care about rx only if the transfer's original "rx" is
-+ * not null
-+ */
-+ if (priv->rx_end - priv->len) {
-+ if (priv->bits_per_word == 8)
-+ *(u8 *)(priv->rx) = rxw;
-+ else
-+ *(u16 *)(priv->rx) = rxw;
-+ }
-+ priv->rx += priv->bits_per_word >> 3;
-+ }
-+
-+ return 0;
-+}
-+
-+static int poll_transfer(struct dw_spi_priv *priv)
-+{
-+ int ret;
-+
-+ do {
-+ dw_writer(priv);
-+ ret = dw_reader(priv);
-+ if (ret < 0)
-+ return ret;
-+ } while (priv->rx_end > priv->rx);
-+
-+ return 0;
-+}
-+
-+static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
-+ const void *dout, void *din, unsigned long flags)
-+{
-+ struct udevice *bus = dev->parent;
-+ struct dw_spi_priv *priv = dev_get_priv(bus);
-+ const u8 *tx = dout;
-+ u8 *rx = din;
-+ int ret = 0;
-+ u32 cr0 = 0;
-+ u32 cs;
-+
-+ /* spi core configured to do 8 bit transfers */
-+ if (bitlen % 8) {
-+ debug("Non byte aligned SPI transfer.\n");
-+ return -1;
-+ }
-+
-+ cr0 = (priv->bits_per_word - 1) | (priv->type << SPI_FRF_OFFSET) |
-+ (priv->mode << SPI_MODE_OFFSET) |
-+ (priv->tmode << SPI_TMOD_OFFSET);
-+
-+ if (rx && tx)
-+ priv->tmode = SPI_TMOD_TR;
-+ else if (rx)
-+ priv->tmode = SPI_TMOD_RO;
-+ else
-+ priv->tmode = SPI_TMOD_TO;
-+
-+ cr0 &= ~SPI_TMOD_MASK;
-+ cr0 |= (priv->tmode << SPI_TMOD_OFFSET);
-+
-+ priv->len = bitlen >> 3;
-+ debug("%s: rx=%p tx=%p len=%d [bytes]\n", __func__, rx, tx, priv->len);
-+
-+ priv->tx = (void *)tx;
-+ priv->tx_end = priv->tx + priv->len;
-+ priv->rx = rx;
-+ priv->rx_end = priv->rx + priv->len;
-+
-+ /* Disable controller before writing control registers */
-+ spi_enable_chip(priv, 0);
-+
-+ debug("%s: cr0=%08x\n", __func__, cr0);
-+ /* Reprogram cr0 only if changed */
-+ if (dw_readw(priv, DW_SPI_CTRL0) != cr0)
-+ dw_writew(priv, DW_SPI_CTRL0, cr0);
-+
-+ /*
-+ * Configure the desired SS (slave select 0...3) in the controller
-+ * The DW SPI controller will activate and deactivate this CS
-+ * automatically. So no cs_activate() etc is needed in this driver.
-+ */
-+ cs = spi_chip_select(dev);
-+ dw_writel(priv, DW_SPI_SER, 1 << cs);
-+
-+ /* Enable controller after writing control registers */
-+ spi_enable_chip(priv, 1);
-+
-+ /* Start transfer in a polling loop */
-+ ret = poll_transfer(priv);
-+
-+ return ret;
-+}
-+
-+static int dw_spi_set_speed(struct udevice *bus, uint speed)
-+{
-+ struct dw_spi_platdata *plat = bus->platdata;
-+ struct dw_spi_priv *priv = dev_get_priv(bus);
-+ u16 clk_div;
-+
-+ if (speed > plat->frequency)
-+ speed = plat->frequency;
-+
-+ /* Disable controller before writing control registers */
-+ spi_enable_chip(priv, 0);
-+
-+ /* clk_div doesn't support odd number */
-+ clk_div = cm_get_spi_controller_clk_hz() / speed;
-+ clk_div = (clk_div + 1) & 0xfffe;
-+ dw_writel(priv, DW_SPI_BAUDR, clk_div);
-+
-+ /* Enable controller after writing control registers */
-+ spi_enable_chip(priv, 1);
-+
-+ priv->freq = speed;
-+ debug("%s: regs=%p speed=%d clk_div=%d\n", __func__, priv->regs,
-+ priv->freq, clk_div);
-+
-+ return 0;
-+}
-+
-+static int dw_spi_set_mode(struct udevice *bus, uint mode)
-+{
-+ struct dw_spi_priv *priv = dev_get_priv(bus);
-+
-+ /*
-+ * Can't set mode yet. Since this depends on if rx, tx, or
-+ * rx & tx is requested. So we have to defer this to the
-+ * real transfer function.
-+ */
-+ priv->mode = mode;
-+ debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
-+
-+ return 0;
-+}
-+
-+static const struct dm_spi_ops dw_spi_ops = {
-+ .xfer = dw_spi_xfer,
-+ .set_speed = dw_spi_set_speed,
-+ .set_mode = dw_spi_set_mode,
-+ /*
-+ * cs_info is not needed, since we require all chip selects to be
-+ * in the device tree explicitly
-+ */
-+};
-+
-+static const struct udevice_id dw_spi_ids[] = {
-+ { .compatible = "snps,dw-spi-mmio" },
-+ { }
-+};
-+
-+U_BOOT_DRIVER(dw_spi) = {
-+ .name = "dw_spi",
-+ .id = UCLASS_SPI,
-+ .of_match = dw_spi_ids,
-+ .ops = &dw_spi_ops,
-+ .ofdata_to_platdata = dw_spi_ofdata_to_platdata,
-+ .platdata_auto_alloc_size = sizeof(struct dw_spi_platdata),
-+ .priv_auto_alloc_size = sizeof(struct dw_spi_priv),
-+ .per_child_auto_alloc_size = sizeof(struct spi_slave),
-+ .probe = dw_spi_probe,
-+};
-diff -ruN u-boot-2015.01-rc3/drivers/spi/ich.c u-boot/drivers/spi/ich.c
---- u-boot-2015.01-rc3/drivers/spi/ich.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/spi/ich.c 2015-01-01 17:34:32.701495908 +0100
-@@ -141,6 +141,15 @@
- ich->slave.max_write_size = ctlr.databytes;
- ich->speed = max_hz;
-
-+ /*
-+ * ICH 7 SPI controller only supports array read command
-+ * and byte program command for SST flash
-+ */
-+ if (ctlr.ich_version == 7) {
-+ ich->slave.op_mode_rx = SPI_OPM_RX_AS;
-+ ich->slave.op_mode_tx = SPI_OPM_TX_BP;
-+ }
-+
- return &ich->slave;
- }
-
-@@ -158,7 +167,8 @@
- */
- static int get_ich_version(uint16_t device_id)
- {
-- if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC)
-+ if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC ||
-+ device_id == PCI_DEVICE_ID_INTEL_ITC_LPC)
- return 7;
-
- if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN &&
-@@ -483,8 +493,6 @@
- struct spi_trans *trans = &ich->trans;
- unsigned type = flags & (SPI_XFER_BEGIN | SPI_XFER_END);
- int using_cmd = 0;
-- /* Align read transactions to 64-byte boundaries */
-- char buff[ctlr.databytes];
-
- /* Ee don't support writing partial bytes. */
- if (bitlen % 8) {
-@@ -632,14 +640,9 @@
- */
- while (trans->bytesout || trans->bytesin) {
- uint32_t data_length;
-- uint32_t aligned_offset;
-- uint32_t diff;
--
-- aligned_offset = trans->offset & ~(ctlr.databytes - 1);
-- diff = trans->offset - aligned_offset;
-
- /* SPI addresses are 24 bit only */
-- ich_writel(aligned_offset & 0x00FFFFFF, ctlr.addr);
-+ ich_writel(trans->offset & 0x00FFFFFF, ctlr.addr);
-
- if (trans->bytesout)
- data_length = min(trans->bytesout, ctlr.databytes);
-@@ -673,13 +676,7 @@
- }
-
- if (trans->bytesin) {
-- if (diff) {
-- data_length -= diff;
-- read_reg(ctlr.data, buff, ctlr.databytes);
-- memcpy(trans->in, buff + diff, data_length);
-- } else {
-- read_reg(ctlr.data, trans->in, data_length);
-- }
-+ read_reg(ctlr.data, trans->in, data_length);
- spi_use_in(trans, data_length);
- if (with_address)
- trans->offset += data_length;
-diff -ruN u-boot-2015.01-rc3/drivers/spi/Makefile u-boot/drivers/spi/Makefile
---- u-boot-2015.01-rc3/drivers/spi/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/spi/Makefile 2015-01-01 17:34:32.701495908 +0100
-@@ -23,9 +23,11 @@
- obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o
- obj-$(CONFIG_BFIN_SPI) += bfin_spi.o
- obj-$(CONFIG_BFIN_SPI6XX) += bfin_spi6xx.o
-+obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o
- obj-$(CONFIG_CF_SPI) += cf_spi.o
- obj-$(CONFIG_CF_QSPI) += cf_qspi.o
- obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
-+obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
- obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
- obj-$(CONFIG_FTSSP010_SPI) += ftssp010_spi.o
- obj-$(CONFIG_ICH_SPI) += ich.o
-diff -ruN u-boot-2015.01-rc3/drivers/thermal/imx_thermal.c u-boot/drivers/thermal/imx_thermal.c
---- u-boot-2015.01-rc3/drivers/thermal/imx_thermal.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/thermal/imx_thermal.c 2015-01-01 17:34:32.705495842 +0100
-@@ -156,8 +156,6 @@
- if (fuse == 0 || fuse == ~0) {
- printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse);
- return -EPERM;
-- } else {
-- printf("CPU: Thermal calibration data: 0x%x\n", fuse);
- }
-
- *priv = fuse;
-diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/atmel_usba_udc.c u-boot/drivers/usb/gadget/atmel_usba_udc.c
---- u-boot-2015.01-rc3/drivers/usb/gadget/atmel_usba_udc.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/usb/gadget/atmel_usba_udc.c 2015-01-01 17:34:32.709495776 +0100
-@@ -1062,7 +1062,6 @@
- if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
- DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
- receive_data(ep);
-- usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
- }
- }
-
-diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/ether.c u-boot/drivers/usb/gadget/ether.c
---- u-boot-2015.01-rc3/drivers/usb/gadget/ether.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/usb/gadget/ether.c 2015-01-01 17:34:32.709495776 +0100
-@@ -852,30 +852,6 @@
- DEFINE_CACHE_ALIGN_BUFFER(u8, status_req, STATUS_BYTECOUNT);
- #endif
-
--
--/**
-- * strlcpy - Copy a %NUL terminated string into a sized buffer
-- * @dest: Where to copy the string to
-- * @src: Where to copy the string from
-- * @size: size of destination buffer
-- *
-- * Compatible with *BSD: the result is always a valid
-- * NUL-terminated string that fits in the buffer (unless,
-- * of course, the buffer size is zero). It does not pad
-- * out the result like strncpy() does.
-- */
--size_t strlcpy(char *dest, const char *src, size_t size)
--{
-- size_t ret = strlen(src);
--
-- if (size) {
-- size_t len = (ret >= size) ? size - 1 : ret;
-- memcpy(dest, src, len);
-- dest[len] = '\0';
-- }
-- return ret;
--}
--
- /*============================================================================*/
-
- /*
-diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/f_dfu.c u-boot/drivers/usb/gadget/f_dfu.c
---- u-boot-2015.01-rc3/drivers/usb/gadget/f_dfu.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/usb/gadget/f_dfu.c 2015-01-01 17:34:32.709495776 +0100
-@@ -366,7 +366,7 @@
- to_runtime_mode(f_dfu);
- f_dfu->dfu_state = DFU_STATE_appIDLE;
-
-- dfu_trigger_detach();
-+ g_dnl_trigger_detach();
- break;
- default:
- f_dfu->dfu_state = DFU_STATE_dfuERROR;
-diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/f_fastboot.c u-boot/drivers/usb/gadget/f_fastboot.c
---- u-boot-2015.01-rc3/drivers/usb/gadget/f_fastboot.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/usb/gadget/f_fastboot.c 2015-01-01 17:34:32.709495776 +0100
-@@ -480,6 +480,17 @@
- fastboot_tx_write_str("OKAY");
- }
-
-+static void do_exit_on_complete(struct usb_ep *ep, struct usb_request *req)
-+{
-+ g_dnl_trigger_detach();
-+}
-+
-+static void cb_continue(struct usb_ep *ep, struct usb_request *req)
-+{
-+ fastboot_func->in_req->complete = do_exit_on_complete;
-+ fastboot_tx_write_str("OKAY");
-+}
-+
- #ifdef CONFIG_FASTBOOT_FLASH
- static void cb_flash(struct usb_ep *ep, struct usb_request *req)
- {
-@@ -520,6 +531,9 @@
- }, {
- .cmd = "boot",
- .cb = cb_boot,
-+ }, {
-+ .cmd = "continue",
-+ .cb = cb_continue,
- },
- #ifdef CONFIG_FASTBOOT_FLASH
- {
-diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/f_thor.c u-boot/drivers/usb/gadget/f_thor.c
---- u-boot-2015.01-rc3/drivers/usb/gadget/f_thor.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/usb/gadget/f_thor.c 2015-01-01 17:34:32.709495776 +0100
-@@ -205,12 +205,24 @@
-
- static int download_tail(long long int left, int cnt)
- {
-- struct dfu_entity *dfu_entity = dfu_get_entity(alt_setting_num);
-- void *transfer_buffer = dfu_get_buf(dfu_entity);
-+ struct dfu_entity *dfu_entity;
-+ void *transfer_buffer;
- int ret;
-
- debug("%s: left: %llu cnt: %d\n", __func__, left, cnt);
-
-+ dfu_entity = dfu_get_entity(alt_setting_num);
-+ if (!dfu_entity) {
-+ error("Alt setting: %d entity not found!\n", alt_setting_num);
-+ return -ENOENT;
-+ }
-+
-+ transfer_buffer = dfu_get_buf(dfu_entity);
-+ if (!transfer_buffer) {
-+ error("Transfer buffer not allocated!");
-+ return -ENXIO;
-+ }
-+
- if (left) {
- ret = dfu_write(dfu_entity, transfer_buffer, left, cnt++);
- if (ret) {
-diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/g_dnl.c u-boot/drivers/usb/gadget/g_dnl.c
---- u-boot-2015.01-rc3/drivers/usb/gadget/g_dnl.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/usb/gadget/g_dnl.c 2015-01-01 17:34:32.709495776 +0100
-@@ -163,6 +163,23 @@
- return -EOPNOTSUPP;
- }
-
-+static bool g_dnl_detach_request;
-+
-+bool g_dnl_detach(void)
-+{
-+ return g_dnl_detach_request;
-+}
-+
-+void g_dnl_trigger_detach(void)
-+{
-+ g_dnl_detach_request = true;
-+}
-+
-+void g_dnl_clear_detach(void)
-+{
-+ g_dnl_detach_request = false;
-+}
-+
- static int g_dnl_get_bcd_device_number(struct usb_composite_dev *cdev)
- {
- struct usb_gadget *gadget = cdev->gadget;
-diff -ruN u-boot-2015.01-rc3/drivers/usb/host/ehci-fsl.c u-boot/drivers/usb/host/ehci-fsl.c
---- u-boot-2015.01-rc3/drivers/usb/host/ehci-fsl.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/usb/host/ehci-fsl.c 2015-01-01 17:34:32.713495710 +0100
-@@ -15,9 +15,14 @@
- #include <usb/ehci-fsl.h>
- #include <hwconfig.h>
- #include <fsl_usb.h>
-+#include <fdt_support.h>
-
- #include "ehci.h"
-
-+#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
-+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-+#endif
-+
- static void set_txfifothresh(struct usb_ehci *, u32);
-
- /* Check USB PHY clock valid */
-@@ -158,3 +163,184 @@
- cmd |= TXFIFO_THRESH(txfifo_thresh);
- ehci_writel(&ehci->txfilltuning, cmd);
- }
-+
-+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-+static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
-+ const char *phy_type, int start_offset)
-+{
-+ const char *compat_dr = "fsl-usb2-dr";
-+ const char *compat_mph = "fsl-usb2-mph";
-+ const char *prop_mode = "dr_mode";
-+ const char *prop_type = "phy_type";
-+ const char *node_type = NULL;
-+ int node_offset;
-+ int err;
-+
-+ node_offset = fdt_node_offset_by_compatible(blob,
-+ start_offset, compat_mph);
-+ if (node_offset < 0) {
-+ node_offset = fdt_node_offset_by_compatible(blob,
-+ start_offset,
-+ compat_dr);
-+ if (node_offset < 0) {
-+ printf("WARNING: could not find compatible node: %s",
-+ fdt_strerror(node_offset));
-+ return -1;
-+ }
-+ node_type = compat_dr;
-+ } else {
-+ node_type = compat_mph;
-+ }
-+
-+ if (mode) {
-+ err = fdt_setprop(blob, node_offset, prop_mode, mode,
-+ strlen(mode) + 1);
-+ if (err < 0)
-+ printf("WARNING: could not set %s for %s: %s.\n",
-+ prop_mode, node_type, fdt_strerror(err));
-+ }
-+
-+ if (phy_type) {
-+ err = fdt_setprop(blob, node_offset, prop_type, phy_type,
-+ strlen(phy_type) + 1);
-+ if (err < 0)
-+ printf("WARNING: could not set %s for %s: %s.\n",
-+ prop_type, node_type, fdt_strerror(err));
-+ }
-+
-+ return node_offset;
-+}
-+
-+static const char *fdt_usb_get_node_type(void *blob, int start_offset,
-+ int *node_offset)
-+{
-+ const char *compat_dr = "fsl-usb2-dr";
-+ const char *compat_mph = "fsl-usb2-mph";
-+ const char *node_type = NULL;
-+
-+ *node_offset = fdt_node_offset_by_compatible(blob, start_offset,
-+ compat_mph);
-+ if (*node_offset < 0) {
-+ *node_offset = fdt_node_offset_by_compatible(blob,
-+ start_offset,
-+ compat_dr);
-+ if (*node_offset < 0) {
-+ printf("ERROR: could not find compatible node: %s\n",
-+ fdt_strerror(*node_offset));
-+ } else {
-+ node_type = compat_dr;
-+ }
-+ } else {
-+ node_type = compat_mph;
-+ }
-+
-+ return node_type;
-+}
-+
-+static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
-+ int start_offset)
-+{
-+ int node_offset, err;
-+ const char *node_type = NULL;
-+
-+ node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
-+ if (!node_type)
-+ return -1;
-+
-+ err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
-+ if (err < 0) {
-+ printf("ERROR: could not set %s for %s: %s.\n",
-+ prop_erratum, node_type, fdt_strerror(err));
-+ }
-+
-+ return node_offset;
-+}
-+
-+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
-+{
-+ static const char * const modes[] = { "host", "peripheral", "otg" };
-+ static const char * const phys[] = { "ulpi", "utmi" };
-+ int usb_erratum_a006261_off = -1;
-+ int usb_erratum_a007075_off = -1;
-+ int usb_erratum_a007792_off = -1;
-+ int usb_mode_off = -1;
-+ int usb_phy_off = -1;
-+ char str[5];
-+ int i, j;
-+
-+ for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
-+ const char *dr_mode_type = NULL;
-+ const char *dr_phy_type = NULL;
-+ int mode_idx = -1, phy_idx = -1;
-+
-+ snprintf(str, 5, "%s%d", "usb", i);
-+ if (hwconfig(str)) {
-+ for (j = 0; j < ARRAY_SIZE(modes); j++) {
-+ if (hwconfig_subarg_cmp(str, "dr_mode",
-+ modes[j])) {
-+ mode_idx = j;
-+ break;
-+ }
-+ }
-+
-+ for (j = 0; j < ARRAY_SIZE(phys); j++) {
-+ if (hwconfig_subarg_cmp(str, "phy_type",
-+ phys[j])) {
-+ phy_idx = j;
-+ break;
-+ }
-+ }
-+
-+ if (mode_idx < 0 && phy_idx < 0) {
-+ printf("WARNING: invalid phy or mode\n");
-+ return;
-+ }
-+
-+ if (mode_idx > -1)
-+ dr_mode_type = modes[mode_idx];
-+
-+ if (phy_idx > -1)
-+ dr_phy_type = phys[phy_idx];
-+ }
-+
-+ usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
-+ dr_mode_type, NULL,
-+ usb_mode_off);
-+
-+ if (usb_mode_off < 0)
-+ return;
-+
-+ usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
-+ NULL, dr_phy_type,
-+ usb_phy_off);
-+
-+ if (usb_phy_off < 0)
-+ return;
-+
-+ if (has_erratum_a006261()) {
-+ usb_erratum_a006261_off = fdt_fixup_usb_erratum
-+ (blob,
-+ "fsl,usb-erratum-a006261",
-+ usb_erratum_a006261_off);
-+ if (usb_erratum_a006261_off < 0)
-+ return;
-+ }
-+ if (has_erratum_a007075()) {
-+ usb_erratum_a007075_off = fdt_fixup_usb_erratum
-+ (blob,
-+ "fsl,usb-erratum-a007075",
-+ usb_erratum_a007075_off);
-+ if (usb_erratum_a007075_off < 0)
-+ return;
-+ }
-+ if (has_erratum_a007792()) {
-+ usb_erratum_a007792_off = fdt_fixup_usb_erratum
-+ (blob,
-+ "fsl,usb-erratum-a007792",
-+ usb_erratum_a007792_off);
-+ if (usb_erratum_a007792_off < 0)
-+ return;
-+ }
-+ }
-+}
-+#endif
-diff -ruN u-boot-2015.01-rc3/drivers/usb/host/ehci-hcd.c u-boot/drivers/usb/host/ehci-hcd.c
---- u-boot-2015.01-rc3/drivers/usb/host/ehci-hcd.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/usb/host/ehci-hcd.c 2015-01-01 17:34:32.713495710 +0100
-@@ -971,7 +971,6 @@
- qh_list->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH);
- qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) |
- QH_ENDPT1_EPS(USB_SPEED_HIGH));
-- qh_list->qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE);
- qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
- qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
- qh_list->qh_overlay.qt_token =
-diff -ruN u-boot-2015.01-rc3/drivers/usb/host/ehci-mx6.c u-boot/drivers/usb/host/ehci-mx6.c
---- u-boot-2015.01-rc3/drivers/usb/host/ehci-mx6.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/drivers/usb/host/ehci-mx6.c 2015-01-01 17:34:32.713495710 +0100
-@@ -160,7 +160,7 @@
- val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
- __raw_writel(val, phy_ctrl);
-
-- return val & USBPHY_CTRL_OTG_ID;
-+ return 0;
- }
-
- /* Base address for this IP block is 0x02184800 */
-@@ -193,6 +193,28 @@
- __raw_writel(val, ctrl);
- }
-
-+int usb_phy_mode(int port)
-+{
-+ void __iomem *phy_reg;
-+ void __iomem *phy_ctrl;
-+ u32 val;
-+
-+ phy_reg = (void __iomem *)phy_bases[port];
-+ phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
-+
-+ val = __raw_readl(phy_ctrl);
-+
-+ if (val & USBPHY_CTRL_OTG_ID)
-+ return USB_INIT_DEVICE;
-+ else
-+ return USB_INIT_HOST;
-+}
-+
-+int __weak board_usb_phy_mode(int port)
-+{
-+ return usb_phy_mode(port);
-+}
-+
- int __weak board_ehci_hcd_init(int port)
- {
- return 0;
-@@ -221,7 +243,8 @@
- usb_power_config(index);
- usb_oc_config(index);
- usb_internal_phy_clock_gate(index, 1);
-- type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST;
-+ usb_phy_enable(index, ehci);
-+ type = board_usb_phy_mode(index);
-
- *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
- *hcor = (struct ehci_hcor *)((uint32_t)*hccr +
-diff -ruN u-boot-2015.01-rc3/.git/config u-boot/.git/config
---- u-boot-2015.01-rc3/.git/config 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/config 2015-01-01 17:34:31.953508170 +0100
-@@ -0,0 +1,11 @@
-+[core]
-+ repositoryformatversion = 0
-+ filemode = true
-+ bare = false
-+ logallrefupdates = true
-+[remote "origin"]
-+ fetch = +refs/heads/*:refs/remotes/origin/*
-+ url = git://git.denx.de/u-boot.git
-+[branch "master"]
-+ remote = origin
-+ merge = refs/heads/master
-diff -ruN u-boot-2015.01-rc3/.git/description u-boot/.git/description
---- u-boot-2015.01-rc3/.git/description 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/description 2015-01-01 17:34:05.785937163 +0100
-@@ -0,0 +1 @@
-+Unnamed repository; edit this file 'description' to name the repository.
-diff -ruN u-boot-2015.01-rc3/.git/HEAD u-boot/.git/HEAD
---- u-boot-2015.01-rc3/.git/HEAD 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/HEAD 2015-01-01 17:34:31.953508170 +0100
-@@ -0,0 +1 @@
-+ref: refs/heads/master
-diff -ruN u-boot-2015.01-rc3/.git/hooks/applypatch-msg.sample u-boot/.git/hooks/applypatch-msg.sample
---- u-boot-2015.01-rc3/.git/hooks/applypatch-msg.sample 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/hooks/applypatch-msg.sample 2015-01-01 17:34:05.793937033 +0100
-@@ -0,0 +1,15 @@
-+#!/bin/sh
-+#
-+# An example hook script to check the commit log message taken by
-+# applypatch from an e-mail message.
-+#
-+# The hook should exit with non-zero status after issuing an
-+# appropriate message if it wants to stop the commit. The hook is
-+# allowed to edit the commit message file.
-+#
-+# To enable this hook, rename this file to "applypatch-msg".
-+
-+. git-sh-setup
-+test -x "$GIT_DIR/hooks/commit-msg" &&
-+ exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"}
-+:
-diff -ruN u-boot-2015.01-rc3/.git/hooks/commit-msg.sample u-boot/.git/hooks/commit-msg.sample
---- u-boot-2015.01-rc3/.git/hooks/commit-msg.sample 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/hooks/commit-msg.sample 2015-01-01 17:34:05.793937033 +0100
-@@ -0,0 +1,24 @@
-+#!/bin/sh
-+#
-+# An example hook script to check the commit log message.
-+# Called by "git commit" with one argument, the name of the file
-+# that has the commit message. The hook should exit with non-zero
-+# status after issuing an appropriate message if it wants to stop the
-+# commit. The hook is allowed to edit the commit message file.
-+#
-+# To enable this hook, rename this file to "commit-msg".
-+
-+# Uncomment the below to add a Signed-off-by line to the message.
-+# Doing this in a hook is a bad idea in general, but the prepare-commit-msg
-+# hook is more suited to it.
-+#
-+# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
-+# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
-+
-+# This example catches duplicate Signed-off-by lines.
-+
-+test "" = "$(grep '^Signed-off-by: ' "$1" |
-+ sort | uniq -c | sed -e '/^[ ]*1[ ]/d')" || {
-+ echo >&2 Duplicate Signed-off-by lines.
-+ exit 1
-+}
-diff -ruN u-boot-2015.01-rc3/.git/hooks/post-update.sample u-boot/.git/hooks/post-update.sample
---- u-boot-2015.01-rc3/.git/hooks/post-update.sample 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/hooks/post-update.sample 2015-01-01 17:34:05.797936967 +0100
-@@ -0,0 +1,8 @@
-+#!/bin/sh
-+#
-+# An example hook script to prepare a packed repository for use over
-+# dumb transports.
-+#
-+# To enable this hook, rename this file to "post-update".
-+
-+exec git update-server-info
-diff -ruN u-boot-2015.01-rc3/.git/hooks/pre-applypatch.sample u-boot/.git/hooks/pre-applypatch.sample
---- u-boot-2015.01-rc3/.git/hooks/pre-applypatch.sample 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/hooks/pre-applypatch.sample 2015-01-01 17:34:05.793937033 +0100
-@@ -0,0 +1,14 @@
-+#!/bin/sh
-+#
-+# An example hook script to verify what is about to be committed
-+# by applypatch from an e-mail message.
-+#
-+# The hook should exit with non-zero status after issuing an
-+# appropriate message if it wants to stop the commit.
-+#
-+# To enable this hook, rename this file to "pre-applypatch".
-+
-+. git-sh-setup
-+test -x "$GIT_DIR/hooks/pre-commit" &&
-+ exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"}
-+:
-diff -ruN u-boot-2015.01-rc3/.git/hooks/pre-commit.sample u-boot/.git/hooks/pre-commit.sample
---- u-boot-2015.01-rc3/.git/hooks/pre-commit.sample 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/hooks/pre-commit.sample 2015-01-01 17:34:05.793937033 +0100
-@@ -0,0 +1,50 @@
-+#!/bin/sh
-+#
-+# An example hook script to verify what is about to be committed.
-+# Called by "git commit" with no arguments. The hook should
-+# exit with non-zero status after issuing an appropriate message if
-+# it wants to stop the commit.
-+#
-+# To enable this hook, rename this file to "pre-commit".
-+
-+if git rev-parse --verify HEAD >/dev/null 2>&1
-+then
-+ against=HEAD
-+else
-+ # Initial commit: diff against an empty tree object
-+ against=4b825dc642cb6eb9a060e54bf8d69288fbee4904
-+fi
-+
-+# If you want to allow non-ascii filenames set this variable to true.
-+allownonascii=$(git config hooks.allownonascii)
-+
-+# Redirect output to stderr.
-+exec 1>&2
-+
-+# Cross platform projects tend to avoid non-ascii filenames; prevent
-+# them from being added to the repository. We exploit the fact that the
-+# printable range starts at the space character and ends with tilde.
-+if [ "$allownonascii" != "true" ] &&
-+ # Note that the use of brackets around a tr range is ok here, (it's
-+ # even required, for portability to Solaris 10's /usr/bin/tr), since
-+ # the square bracket bytes happen to fall in the designated range.
-+ test $(git diff --cached --name-only --diff-filter=A -z $against |
-+ LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0
-+then
-+ echo "Error: Attempt to add a non-ascii file name."
-+ echo
-+ echo "This can cause problems if you want to work"
-+ echo "with people on other platforms."
-+ echo
-+ echo "To be portable it is advisable to rename the file ..."
-+ echo
-+ echo "If you know what you are doing you can disable this"
-+ echo "check using:"
-+ echo
-+ echo " git config hooks.allownonascii true"
-+ echo
-+ exit 1
-+fi
-+
-+# If there are whitespace errors, print the offending file names and fail.
-+exec git diff-index --check --cached $against --
-diff -ruN u-boot-2015.01-rc3/.git/hooks/prepare-commit-msg.sample u-boot/.git/hooks/prepare-commit-msg.sample
---- u-boot-2015.01-rc3/.git/hooks/prepare-commit-msg.sample 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/hooks/prepare-commit-msg.sample 2015-01-01 17:34:05.801936901 +0100
-@@ -0,0 +1,36 @@
-+#!/bin/sh
-+#
-+# An example hook script to prepare the commit log message.
-+# Called by "git commit" with the name of the file that has the
-+# commit message, followed by the description of the commit
-+# message's source. The hook's purpose is to edit the commit
-+# message file. If the hook fails with a non-zero status,
-+# the commit is aborted.
-+#
-+# To enable this hook, rename this file to "prepare-commit-msg".
-+
-+# This hook includes three examples. The first comments out the
-+# "Conflicts:" part of a merge commit.
-+#
-+# The second includes the output of "git diff --name-status -r"
-+# into the message, just before the "git status" output. It is
-+# commented because it doesn't cope with --amend or with squashed
-+# commits.
-+#
-+# The third example adds a Signed-off-by line to the message, that can
-+# still be edited. This is rarely a good idea.
-+
-+case "$2,$3" in
-+ merge,)
-+ /usr/bin/perl -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;;
-+
-+# ,|template,)
-+# /usr/bin/perl -i.bak -pe '
-+# print "\n" . `git diff --cached --name-status -r`
-+# if /^#/ && $first++ == 0' "$1" ;;
-+
-+ *) ;;
-+esac
-+
-+# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
-+# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
-diff -ruN u-boot-2015.01-rc3/.git/hooks/pre-rebase.sample u-boot/.git/hooks/pre-rebase.sample
---- u-boot-2015.01-rc3/.git/hooks/pre-rebase.sample 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/hooks/pre-rebase.sample 2015-01-01 17:34:05.801936901 +0100
-@@ -0,0 +1,169 @@
-+#!/bin/sh
-+#
-+# Copyright (c) 2006, 2008 Junio C Hamano
-+#
-+# The "pre-rebase" hook is run just before "git rebase" starts doing
-+# its job, and can prevent the command from running by exiting with
-+# non-zero status.
-+#
-+# The hook is called with the following parameters:
-+#
-+# $1 -- the upstream the series was forked from.
-+# $2 -- the branch being rebased (or empty when rebasing the current branch).
-+#
-+# This sample shows how to prevent topic branches that are already
-+# merged to 'next' branch from getting rebased, because allowing it
-+# would result in rebasing already published history.
-+
-+publish=next
-+basebranch="$1"
-+if test "$#" = 2
-+then
-+ topic="refs/heads/$2"
-+else
-+ topic=`git symbolic-ref HEAD` ||
-+ exit 0 ;# we do not interrupt rebasing detached HEAD
-+fi
-+
-+case "$topic" in
-+refs/heads/??/*)
-+ ;;
-+*)
-+ exit 0 ;# we do not interrupt others.
-+ ;;
-+esac
-+
-+# Now we are dealing with a topic branch being rebased
-+# on top of master. Is it OK to rebase it?
-+
-+# Does the topic really exist?
-+git show-ref -q "$topic" || {
-+ echo >&2 "No such branch $topic"
-+ exit 1
-+}
-+
-+# Is topic fully merged to master?
-+not_in_master=`git rev-list --pretty=oneline ^master "$topic"`
-+if test -z "$not_in_master"
-+then
-+ echo >&2 "$topic is fully merged to master; better remove it."
-+ exit 1 ;# we could allow it, but there is no point.
-+fi
-+
-+# Is topic ever merged to next? If so you should not be rebasing it.
-+only_next_1=`git rev-list ^master "^$topic" ${publish} | sort`
-+only_next_2=`git rev-list ^master ${publish} | sort`
-+if test "$only_next_1" = "$only_next_2"
-+then
-+ not_in_topic=`git rev-list "^$topic" master`
-+ if test -z "$not_in_topic"
-+ then
-+ echo >&2 "$topic is already up-to-date with master"
-+ exit 1 ;# we could allow it, but there is no point.
-+ else
-+ exit 0
-+ fi
-+else
-+ not_in_next=`git rev-list --pretty=oneline ^${publish} "$topic"`
-+ /usr/bin/perl -e '
-+ my $topic = $ARGV[0];
-+ my $msg = "* $topic has commits already merged to public branch:\n";
-+ my (%not_in_next) = map {
-+ /^([0-9a-f]+) /;
-+ ($1 => 1);
-+ } split(/\n/, $ARGV[1]);
-+ for my $elem (map {
-+ /^([0-9a-f]+) (.*)$/;
-+ [$1 => $2];
-+ } split(/\n/, $ARGV[2])) {
-+ if (!exists $not_in_next{$elem->[0]}) {
-+ if ($msg) {
-+ print STDERR $msg;
-+ undef $msg;
-+ }
-+ print STDERR " $elem->[1]\n";
-+ }
-+ }
-+ ' "$topic" "$not_in_next" "$not_in_master"
-+ exit 1
-+fi
-+
-+<<\DOC_END
-+
-+This sample hook safeguards topic branches that have been
-+published from being rewound.
-+
-+The workflow assumed here is:
-+
-+ * Once a topic branch forks from "master", "master" is never
-+ merged into it again (either directly or indirectly).
-+
-+ * Once a topic branch is fully cooked and merged into "master",
-+ it is deleted. If you need to build on top of it to correct
-+ earlier mistakes, a new topic branch is created by forking at
-+ the tip of the "master". This is not strictly necessary, but
-+ it makes it easier to keep your history simple.
-+
-+ * Whenever you need to test or publish your changes to topic
-+ branches, merge them into "next" branch.
-+
-+The script, being an example, hardcodes the publish branch name
-+to be "next", but it is trivial to make it configurable via
-+$GIT_DIR/config mechanism.
-+
-+With this workflow, you would want to know:
-+
-+(1) ... if a topic branch has ever been merged to "next". Young
-+ topic branches can have stupid mistakes you would rather
-+ clean up before publishing, and things that have not been
-+ merged into other branches can be easily rebased without
-+ affecting other people. But once it is published, you would
-+ not want to rewind it.
-+
-+(2) ... if a topic branch has been fully merged to "master".
-+ Then you can delete it. More importantly, you should not
-+ build on top of it -- other people may already want to
-+ change things related to the topic as patches against your
-+ "master", so if you need further changes, it is better to
-+ fork the topic (perhaps with the same name) afresh from the
-+ tip of "master".
-+
-+Let's look at this example:
-+
-+ o---o---o---o---o---o---o---o---o---o "next"
-+ / / / /
-+ / a---a---b A / /
-+ / / / /
-+ / / c---c---c---c B /
-+ / / / \ /
-+ / / / b---b C \ /
-+ / / / / \ /
-+ ---o---o---o---o---o---o---o---o---o---o---o "master"
-+
-+
-+A, B and C are topic branches.
-+
-+ * A has one fix since it was merged up to "next".
-+
-+ * B has finished. It has been fully merged up to "master" and "next",
-+ and is ready to be deleted.
-+
-+ * C has not merged to "next" at all.
-+
-+We would want to allow C to be rebased, refuse A, and encourage
-+B to be deleted.
-+
-+To compute (1):
-+
-+ git rev-list ^master ^topic next
-+ git rev-list ^master next
-+
-+ if these match, topic has not merged in next at all.
-+
-+To compute (2):
-+
-+ git rev-list master..topic
-+
-+ if this is empty, it is fully merged to "master".
-+
-+DOC_END
-diff -ruN u-boot-2015.01-rc3/.git/hooks/update.sample u-boot/.git/hooks/update.sample
---- u-boot-2015.01-rc3/.git/hooks/update.sample 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/hooks/update.sample 2015-01-01 17:34:05.793937033 +0100
-@@ -0,0 +1,128 @@
-+#!/bin/sh
-+#
-+# An example hook script to blocks unannotated tags from entering.
-+# Called by "git receive-pack" with arguments: refname sha1-old sha1-new
-+#
-+# To enable this hook, rename this file to "update".
-+#
-+# Config
-+# ------
-+# hooks.allowunannotated
-+# This boolean sets whether unannotated tags will be allowed into the
-+# repository. By default they won't be.
-+# hooks.allowdeletetag
-+# This boolean sets whether deleting tags will be allowed in the
-+# repository. By default they won't be.
-+# hooks.allowmodifytag
-+# This boolean sets whether a tag may be modified after creation. By default
-+# it won't be.
-+# hooks.allowdeletebranch
-+# This boolean sets whether deleting branches will be allowed in the
-+# repository. By default they won't be.
-+# hooks.denycreatebranch
-+# This boolean sets whether remotely creating branches will be denied
-+# in the repository. By default this is allowed.
-+#
-+
-+# --- Command line
-+refname="$1"
-+oldrev="$2"
-+newrev="$3"
-+
-+# --- Safety check
-+if [ -z "$GIT_DIR" ]; then
-+ echo "Don't run this script from the command line." >&2
-+ echo " (if you want, you could supply GIT_DIR then run" >&2
-+ echo " $0 <ref> <oldrev> <newrev>)" >&2
-+ exit 1
-+fi
-+
-+if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then
-+ echo "Usage: $0 <ref> <oldrev> <newrev>" >&2
-+ exit 1
-+fi
-+
-+# --- Config
-+allowunannotated=$(git config --bool hooks.allowunannotated)
-+allowdeletebranch=$(git config --bool hooks.allowdeletebranch)
-+denycreatebranch=$(git config --bool hooks.denycreatebranch)
-+allowdeletetag=$(git config --bool hooks.allowdeletetag)
-+allowmodifytag=$(git config --bool hooks.allowmodifytag)
-+
-+# check for no description
-+projectdesc=$(sed -e '1q' "$GIT_DIR/description")
-+case "$projectdesc" in
-+"Unnamed repository"* | "")
-+ echo "*** Project description file hasn't been set" >&2
-+ exit 1
-+ ;;
-+esac
-+
-+# --- Check types
-+# if $newrev is 0000...0000, it's a commit to delete a ref.
-+zero="0000000000000000000000000000000000000000"
-+if [ "$newrev" = "$zero" ]; then
-+ newrev_type=delete
-+else
-+ newrev_type=$(git cat-file -t $newrev)
-+fi
-+
-+case "$refname","$newrev_type" in
-+ refs/tags/*,commit)
-+ # un-annotated tag
-+ short_refname=${refname##refs/tags/}
-+ if [ "$allowunannotated" != "true" ]; then
-+ echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2
-+ echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2
-+ exit 1
-+ fi
-+ ;;
-+ refs/tags/*,delete)
-+ # delete tag
-+ if [ "$allowdeletetag" != "true" ]; then
-+ echo "*** Deleting a tag is not allowed in this repository" >&2
-+ exit 1
-+ fi
-+ ;;
-+ refs/tags/*,tag)
-+ # annotated tag
-+ if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1
-+ then
-+ echo "*** Tag '$refname' already exists." >&2
-+ echo "*** Modifying a tag is not allowed in this repository." >&2
-+ exit 1
-+ fi
-+ ;;
-+ refs/heads/*,commit)
-+ # branch
-+ if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then
-+ echo "*** Creating a branch is not allowed in this repository" >&2
-+ exit 1
-+ fi
-+ ;;
-+ refs/heads/*,delete)
-+ # delete branch
-+ if [ "$allowdeletebranch" != "true" ]; then
-+ echo "*** Deleting a branch is not allowed in this repository" >&2
-+ exit 1
-+ fi
-+ ;;
-+ refs/remotes/*,commit)
-+ # tracking branch
-+ ;;
-+ refs/remotes/*,delete)
-+ # delete tracking branch
-+ if [ "$allowdeletebranch" != "true" ]; then
-+ echo "*** Deleting a tracking branch is not allowed in this repository" >&2
-+ exit 1
-+ fi
-+ ;;
-+ *)
-+ # Anything else (is there anything else?)
-+ echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2
-+ exit 1
-+ ;;
-+esac
-+
-+# --- Finished
-+exit 0
-Binary files u-boot-2015.01-rc3/.git/index and u-boot/.git/index differ
-diff -ruN u-boot-2015.01-rc3/.git/info/exclude u-boot/.git/info/exclude
---- u-boot-2015.01-rc3/.git/info/exclude 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/info/exclude 2015-01-01 17:34:05.789937097 +0100
-@@ -0,0 +1,6 @@
-+# git ls-files --others --exclude-from=.git/info/exclude
-+# Lines that start with '#' are comments.
-+# For a project mostly in C, the following would be a good set of
-+# exclude patterns (uncomment them if you want to use them):
-+# *.[oa]
-+# *~
-diff -ruN u-boot-2015.01-rc3/.git/logs/HEAD u-boot/.git/logs/HEAD
---- u-boot-2015.01-rc3/.git/logs/HEAD 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/logs/HEAD 2015-01-01 17:34:31.953508170 +0100
-@@ -0,0 +1 @@
-+0000000000000000000000000000000000000000 125738e819a3b9d15210794b3dcef9f4d9bcf866 Zoltan HERPAI <wigyori@uid0.hu> 1420130071 +0100 clone: from git://git.denx.de/u-boot.git
-diff -ruN u-boot-2015.01-rc3/.git/logs/refs/heads/master u-boot/.git/logs/refs/heads/master
---- u-boot-2015.01-rc3/.git/logs/refs/heads/master 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/logs/refs/heads/master 2015-01-01 17:34:31.953508170 +0100
-@@ -0,0 +1 @@
-+0000000000000000000000000000000000000000 125738e819a3b9d15210794b3dcef9f4d9bcf866 Zoltan HERPAI <wigyori@uid0.hu> 1420130071 +0100 clone: from git://git.denx.de/u-boot.git
-diff -ruN u-boot-2015.01-rc3/.git/logs/refs/remotes/origin/HEAD u-boot/.git/logs/refs/remotes/origin/HEAD
---- u-boot-2015.01-rc3/.git/logs/refs/remotes/origin/HEAD 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/logs/refs/remotes/origin/HEAD 2015-01-01 17:34:31.953508170 +0100
-@@ -0,0 +1 @@
-+0000000000000000000000000000000000000000 125738e819a3b9d15210794b3dcef9f4d9bcf866 Zoltan HERPAI <wigyori@uid0.hu> 1420130071 +0100 clone: from git://git.denx.de/u-boot.git
-Binary files u-boot-2015.01-rc3/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.idx and u-boot/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.idx differ
-Binary files u-boot-2015.01-rc3/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.pack and u-boot/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.pack differ
-diff -ruN u-boot-2015.01-rc3/.git/packed-refs u-boot/.git/packed-refs
---- u-boot-2015.01-rc3/.git/packed-refs 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/packed-refs 2015-01-01 17:34:31.865509612 +0100
-@@ -0,0 +1,388 @@
-+# pack-refs with: peeled
-+125738e819a3b9d15210794b3dcef9f4d9bcf866 refs/remotes/origin/master
-+ece0d370144fdecb6f3ed5738ffe96f5b12f9e96 refs/remotes/origin/next
-+cd5b2b9941d5b6f6596787ebdb03c215d91fc44d refs/remotes/origin/origin
-+f20393c5e787b3776c179d20f82a86bda124d651 refs/remotes/origin/u-boot-2009.11.y
-+e8ae0fa5edd152b2b29c470b88429be4cdcd2c46 refs/remotes/origin/u-boot-2013.01.y
-+be360d9824d653780ebd3ffc08f1938a8e3dd747 refs/tags/DENX-2005-10-29-2350
-+384ae02506f0673070a3516b1858f058a07f85f3 refs/tags/LABEL_2002_11_05_0120
-+56f94be3ef63732384063e110277ed89701b6471 refs/tags/LABEL_2002_11_05_1735
-+7f6c2cbc2bc0721c41bb776242c0b18ec70328e4 refs/tags/LABEL_2002_11_10_2310
-+1d0350ed0b1b0f63e3fb5db6b19397b84a2ea1c7 refs/tags/LABEL_2002_11_11_2211
-+2262cfeef91458b01a1bfe3812ccbbfdf8b82807 refs/tags/LABEL_2002_11_18_0115
-+ea909b7604306a400ee3abf57e2fa7b2dde5dde1 refs/tags/LABEL_2002_11_22_0015
-+a6c7ad2f65afaa717ba19cbf9d8d138b5f10ccf9 refs/tags/LABEL_2002_12_03_2230
-+7c7a23bd5a0bc149d2edd665ec46381726b24e0c refs/tags/LABEL_2002_12_07_0120
-+288b3d7f5a54c987ecdfc5add4c7c25d36a9a3e1 refs/tags/LABEL_2002_12_21_0040
-+13122b4f1d6d00d6d4993ef56d9b5c5bd24f431e refs/tags/LABEL_2002_12_28_1700
-+d0fb80c3021e15853895e9ae45ab9368d0fb52fa refs/tags/LABEL_2003_01_11_1050
-+608c91460b37fd9fe0088a0ce813a443f116a8d5 refs/tags/LABEL_2003_01_14_0055
-+6069ff265362ef6239749b5f598b137f407b821e refs/tags/LABEL_2003_02_28_0150
-+43d9616cffb4a130e1620e3e33fc9bc1bcabe399 refs/tags/LABEL_2003_03_06_0050
-+db2f721ffcf9693086a7e5c6c7015f2019e7f52e refs/tags/LABEL_2003_03_06_0200
-+500545cc6b83958209128bffa825b3c842a21a4e refs/tags/LABEL_2003_03_06_1440
-+1cb8e980c41e86760fa93de63f4e4cf643bef9d9 refs/tags/LABEL_2003_03_06_2255
-+1957dd29d980ecb197c3a6dbe4f6609dae135a1d refs/tags/LABEL_2003_03_14_2150
-+10f670178cce29d7f078ca622f0eeafd6903748a refs/tags/LABEL_2003_03_25_1830
-+ac6dbb85b7f080d923013bff4e1d5267cb6f8a5a refs/tags/LABEL_2003_03_26_1300
-+cdd8a0f1517b89349265465bf334db32e2304b45 refs/tags/LABEL_2003_03_27_1900
-+3e38691e8f7aa0d9b498d76c7279ddec6e4946f3 refs/tags/LABEL_2003_04_05_0300
-+4a6fd34b267dbf4a72080ab9a085bb45c63660fb refs/tags/LABEL_2003_04_15_1900
-+7aa78614716b7bd7bdf68553f261ad0d5a12826a refs/tags/LABEL_2003_05_03_1700
-+45219c46605f9b933ab454738ee4ce543d5b70d6 refs/tags/LABEL_2003_05_12_2355
-+7f70e85309c6367138c0ebd14abdd49964b8d50a refs/tags/LABEL_2003_05_20_1630
-+82226bf4d2fe87076d7f5d7e2677fdd5d0e35fc2 refs/tags/LABEL_2003_05_20_2250
-+c8c3a8be2dd09e51d7dc33f431e3a638ac5688f2 refs/tags/LABEL_2003_05_22_2230
-+5d232d0e7ea982d859d028ab482d95eb68460b19 refs/tags/LABEL_2003_05_23_0055
-+4c3b21a5f915988e3d9681cf9cb566bb7bd56859 refs/tags/LABEL_2003_05_23_1450
-+3b57fe0a70b903f4db66c558bb9828bc58acf06b refs/tags/LABEL_2003_05_30_1450
-+7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed refs/tags/LABEL_2003_05_31_2115
-+682011ff6968198da14b89e40d9f55b00f6d91f7 refs/tags/LABEL_2003_06_04_0200
-+a3ed3996cdb9fca78329f6aca62d235263b7da90 refs/tags/LABEL_2003_06_05_2140
-+71f9511803de65a3b98d2f592d418da1d1539f13 refs/tags/LABEL_2003_06_16_0055
-+9a0e21a3a87830f66a93c17d1bca66fd12d860ae refs/tags/LABEL_2003_06_22_1530
-+b783edaee8252bfdba3f7b3fd29519a81ce71e42 refs/tags/LABEL_2003_06_26_2220
-+8bde7f776c77b343aca29b8c7b58464d915ac245 refs/tags/LABEL_2003_06_27_2340
-+91a0ce965d5905c37fff45555b7e3113b9359c8f refs/tags/LABEL_2003_06_28_0050-stable
-+ef0630617e0f52dabb2cf7073df281e680073ec1 refs/tags/LABEL_2003_06_28_0130-stable
-+ed579b4210cc5341d511e090239ca697e91ad728 refs/tags/LABEL_2003_06_28_1800-stable
-+eeacb89cb311fe273fef0f20b2bacf589b36f8f4 refs/tags/LABEL_2003_06_29_0145
-+7152b1d0b3f8beec8c297d64664e41b4c4ef610a refs/tags/LABEL_2003_09_06_0055
-+4f7cb08ee7b48a511a9cd2398fd4a243ca2733c7 refs/tags/LABEL_2003_09_12_0110
-+f5300ab241898c490231e59229e6312aa862ce52 refs/tags/LABEL_2003_09_12_1745
-+531716e1710083f91d9fa351f89d18e271b5c577 refs/tags/LABEL_2003_09_13_2100
-+34b3049a60a37e180d73332ccddf706c049a0515 refs/tags/LABEL_2003_09_16_2310
-+80369866a482b923f0398f4c8172865282559f5b refs/tags/LABEL_2003_09_18_2045
-+bb65a312675f3cd1923a5cbe325ad9ca1703fc58 refs/tags/LABEL_2003_10_01_1830
-+fbe4b5cbdea438ccec0d93de443f367f3ba46196 refs/tags/LABEL_2003_10_06_2355
-+a0ff7f2eda50de4d4096265a086c94ac640fab7c refs/tags/LABEL_2003_10_09_1515
-+5da627a424b3ad2d38a81886ba4a18e5123a6788 refs/tags/LABEL_2003_10_09_2320
-+f72da3406bf6f1c1bce9aa03b07d070413a916af refs/tags/LABEL_2003_10_10_1200
-+2d5b561e2bfdee8552a99b2cf93016cce2a74895 refs/tags/LABEL_2003_10_14_2140
-+42d1f0394bef0624fc9664714d54bb137931d6a6 refs/tags/LABEL_2003_10_16_0200
-+d7281f41094bee59eca958de3c04995a2f79034a refs/tags/LABEL_2003_10_20_0025
-+b4757cee52597ab5a67c30a1bf2a3208209e1ccb refs/tags/LABEL_2003_11_26_MKR
-+fa1399ed127c8be507bf182dc7d8d61a54938d79 refs/tags/LABEL_2003_12_06_1550
-+5e4be00fb037feb6476125d044b98e0e22b70d31 refs/tags/LABEL_2004_01_21_2110
-+6876609446980c3055bbd32c195a63330e21d8e6 refs/tags/LABEL_2004_01_29_1030
-+a2d18bb7d31e7b971386fef505ff0218f3b6e893 refs/tags/LABEL_2004_02_11_2240
-+cf56e1101957c09cb4aafcf28a89658c4649c511 refs/tags/LABEL_2004_02_20_2310
-+5cfbab3d822cb690be6d4f1793aab0cea761134c refs/tags/LABEL_2004_02_24_0305
-+232c150a250bb2fcb894b15d67c65df2458e271f refs/tags/LABEL_2004_03_12_0130
-+42dfe7a1844cbad7114038aaf03828acb7a84414 refs/tags/LABEL_2004_03_14_2340
-+d9df1f4e662441c487f96a4e1f91caa9297afdd9 refs/tags/LABEL_2004_03_16_2330
-+b79a11cc2bda7a4d5e00444427a0d06b4e86a990 refs/tags/LABEL_2004_03_25_1630
-+998eaaecd46ee5f00550e30e606cb5556e0b9345 refs/tags/LABEL_2004_04_18_2135
-+5cf91d6bdc3e60bd43f9ba1bbb97a43ee49b2b2d refs/tags/LABEL_2004_04_23_2240
-+e4cc71aa4403c82f0b3e89087024f83832ece9ec refs/tags/LABEL_2004_05_19_2335
-+69459791268d48c7081802dbc7a51d4e42c8a8cd refs/tags/LABEL_2004_05_29_1850
-+021bfcd3c624ce88f739f01ba4220197bdd47a5e refs/tags/LABEL_2004_06_24_1800
-+e94d2cd9d1dc0f58b18e7c31fc9345129b1a44fb refs/tags/LABEL_2004_07_01_1200
-+31a649234ee4051e96cf45285cdf2dbfa668d30c refs/tags/LABEL_2004_08_28_2355
-+7ca202f566a6e9dc3d0dd0216e82ad1a48f50f19 refs/tags/LABEL_2004_08_29_0045
-+eedcd078fe1434d93b84322c4e14c52f80282a41 refs/tags/LABEL_2004_09_09_0000
-+8b74bf31fe57edfc502f94e905977304eac943ca refs/tags/LABEL_2004_10_12_0110
-+14699a22cf47b83995d19877d2b938b2270defc0 refs/tags/LABEL_2004_10_20_0020
-+cacfab588a897c369a4906818c5ed4bc40a450c5 refs/tags/LABEL_2004_11_17_2222
-+ed54e6212518262d27abe5e6de3c608d5ebceafb refs/tags/LABEL_2004_11_25_0035
-+f7d1572bf51619554f278cb543ef0445baa3a1f8 refs/tags/LABEL_2004_12_18_2335
-+bff96b0e6bdf8551e8468b111177c553e4994db2 refs/tags/LABEL_2004_12_19_1100
-+08f272787a93cb11338fd81ab92a7439a361e3b2 refs/tags/LABEL_2004_12_19_2240
-+400ab719c6025c176c50bcdff342384222d7424b refs/tags/LABEL_2004_12_20_1220
-+436be29cad60a46ed5983120aff71909d8f234a3 refs/tags/LABEL_2005_01_31_2245
-+e799d3755e83c70bf8c92977190d1777b390a8de refs/tags/LABEL_2005_02_07_2045
-+b9649854f6ffdeaad23daec21013552cef2e05f0 refs/tags/LABEL_2005_02_08_1615
-+e58cf2a0cfeb357faa134af1e12b96f4109af360 refs/tags/LABEL_2005_02_28_0050
-+f4733a0764741966a5e842968166b40fb062d577 refs/tags/LABEL_2005_03_06_0225
-+911d08f6ae244c6407fff268585e5b9544ce8adb refs/tags/LABEL_2005_03_15_0125
-+f5c5ef4a1fa7dcf90fd74f795a131d07377406ab refs/tags/LABEL_2005_04_05_1830
-+12b43d515c62682fcf7b578f31920a2be49142fe refs/tags/LABEL_2005_04_05_2345
-+5e5f9ed254e20b830fef5f42a52ac0bbdc92a57e refs/tags/LABEL_2005_04_14_0115
-+412babe304b948e1e3a909f8d2eb091b83f700d5 refs/tags/LABEL_2005_05_05_1920
-+ed16fefcbaf99a67a7dd7639898dbc896c70cb1b refs/tags/LABEL_2005_05_09_1245
-+9dd41a7b0c5c94d74c25edfdd6393c656669c09a refs/tags/LABEL_2005_05_13_0050
-+88804d19e2bf36c9eaefadbd7199c093c900953b refs/tags/LABEL_2005_07_04_0202
-+dafba16e6fc1837381c8e74c4891ad6965cf54ab refs/tags/LABEL_2005_08_12_0050
-+053b40fa0c90d885b00c29c9c4490924801809f7 refs/tags/LABEL_2005_09_15_2320
-+eb394f56db3e05d00891d6dc36a00df0025cf255 refs/tags/LABEL_2006_03_12_0025
-+^84ef51a632063e8cb57b2e9a4252497512831ffe
-+9bf86baaa3b35b25baa2d664e2f7f6cafad689ee refs/tags/LABEL_2006_04_18_1106
-+^8419c013048b1f15f3fa2fc7c0463d860a04ee3e
-+7a4978bc272e20c7febd15d76786c7d9b86a98cd refs/tags/LABEL_2006_05_10_1800
-+^977b50f86824fe3c262ef7efce5dbb7ddaf8a48f
-+c7071e6d645a8e13adb0d4cea2caad27213fa62f refs/tags/LABEL_2006_05_19_1133
-+^5770a1e488621a9e7e344afed7c921ff4e715a63
-+b11752921b5d22dcfda237e035a86470993e887b refs/tags/LABEL_2006_06_30_2020
-+^3f7a63e6a34c5b435864c860c1563117e45d1c35
-+2f91a3d0f8a73665423eb6ab17689c67f05e0887 refs/tags/U-Boot-0_2_0
-+60fbe254243ec461ec73da13132be098db33d3fa refs/tags/U-Boot-0_3_0
-+02c9bed451b36f3b1f11d5fe617da4fe4b9f9ab7 refs/tags/U-Boot-0_3_1
-+993cad9364c6b87ae429d1ed1130d8153f6f027e refs/tags/U-Boot-0_4_0
-+b0fce99bfc116c2ddb4506268d6e4a0a7054478d refs/tags/U-Boot-0_4_1
-+f12e568ca45f6c56b5a6d52a43524987e141abe7 refs/tags/U-Boot-0_4_2
-+ad12965db5d145f7cf7595cbeaf03b3402f42897 refs/tags/U-Boot-0_4_3
-+945af8d723a29e9b6289d84250745ed0dc16fc81 refs/tags/U-Boot-0_4_4
-+ae3af05ec986a8ac66dadb5eafe13db2d4a02c5c refs/tags/U-Boot-0_4_5
-+e0ac62d798ce60ec5d43125d4786e58b0d881836 refs/tags/U-Boot-0_4_6
-+0cb61d7dddb0d8c087f6df46a74815950668c97b refs/tags/U-Boot-0_4_7
-+7205e4075d8b50e4dd89fe39ed03860b23cbb704 refs/tags/U-Boot-0_4_8
-+b13fb01a62708492cae4b33c4d6fa9ae127905f4 refs/tags/U-Boot-1_0_0
-+b299e41a0d34bf96202d9bbb72739bdd9414b0cc refs/tags/U-Boot-1_0_1
-+198ea9e294e38cea49f9f2d9b911bdfdd20e48dc refs/tags/U-Boot-1_0_2
-+f525c8a1476945b078ce4ffe6cf768c286cbf8cc refs/tags/U-Boot-1_1_0
-+08f1080c9cbde2a500e6efe8bc5647a68f183c91 refs/tags/U-Boot-1_1_1
-+15c7a8efd2f7275e5b3249aac305f2598a998645 refs/tags/U-Boot-1_1_2
-+2893ecbf3e5b983970138289b759baf45a327ff3 refs/tags/U-Boot-1_1_3
-+74ad4b4fef966ab4cc7192b5b3808ec95e60570b refs/tags/U-Boot-1_1_4
-+^e6b6d16de73de6a76e2ec4338291e828b860f040
-+b7487ff5a5d41e379809509b9a07546e73577dc8 refs/tags/U-Boot-1_1_5
-+^ba999c531ed16ec749b2b6f4b0133cee38842b91
-+ba89ef3908907cf55a5bff6ba211b8d8c2b08800 refs/tags/U-Boot-1_1_6
-+^c59200443072353044aa4bf737a5a60f9a9af231
-+eb8fae4983cfe07fe7c785f483f2278b6146463a refs/tags/U-Boot-1_2_0
-+^f4eb54529bb3664c3a562e488b460fe075f79d67
-+d9af3c87df93e1a8126b1a52adf8db978e9a0d40 refs/tags/U_BOOT_0_1_0
-+69a193a815e7f0b35eeeb013a1f1e0cd9e590f92 refs/tags/v1.3.0
-+^9a337ddc154a10a26f117fd147b009abcdeba75a
-+6b894f3c3eac06420acad28e70621c5ba410b321 refs/tags/v1.3.0-rc1
-+^ff7640c9ead8806b5d827f2b29f9cb2632add729
-+a5d674296b4a991efdb708a9c8d6c78d4e47f565 refs/tags/v1.3.0-rc2
-+^66dcad3a9a53e0766d90e0084123bd8529522fb0
-+bf58489ae2e0de9bd2d7a6ebdbfdb655b48f0c09 refs/tags/v1.3.0-rc3
-+^636400198228d96983c06657b17f760f5989958e
-+409530dcb489cf4c24fab977ca041dac27ff9f28 refs/tags/v1.3.0-rc4
-+^5947f6999aafa7c54c1390983d264a8463dfea8e
-+2006af48494237562529cfdb111681149e0f13e9 refs/tags/v1.3.1
-+^41be969f4957115ed7b1fe8b890bfaee99d7a7a2
-+b67a97f26c406e9116fc85f5dcad4917b7a1c801 refs/tags/v1.3.1-rc1
-+^8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
-+2b0e9596bac7d2776431657488db88703ba1d441 refs/tags/v1.3.2
-+^30f1806f60978d707b0cff2d7bf89d141fc24290
-+1dec865fbd4b229061233c504166443f623335db refs/tags/v1.3.2-rc1
-+^67a4389e39ad853d65b72e2b7cad15c7e8291147
-+c19f1e9b9a8794d488221a9cc3a60db03b7ccc5a refs/tags/v1.3.2-rc2
-+^b29661fc1151077776454288051bc9a488351ce8
-+955a05aa4445c5652c53e06254d420d7dffd49a6 refs/tags/v1.3.2-rc3
-+^661bad63a076a96c39c64f136915f146725af92b
-+01348d89a001323ae51dda449decea61092e008b refs/tags/v1.3.3
-+^180a90abdae72587c0f679edf8991455e559440d
-+33a7d077fd81772d263a4e91a5aebe585c5362ca refs/tags/v1.3.3-rc1
-+^fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
-+5ee1a6e902f3b76f672587bb7be4600ab9af1c34 refs/tags/v1.3.3-rc2
-+^76617299358ebba260ecc02d33e8e75d8d13dd3b
-+239f0883ea3a9f511f8925619d30a0dc9ea8fe01 refs/tags/v1.3.3-rc3
-+^6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
-+5978b7d69fc40ee9512a6c1b5a3216019ee8e847 refs/tags/v1.3.4
-+^cd82919e6c8a73b363a26f34b734923844e52d1c
-+7cbbab2ab61f4f726fac1ff6b8bf2dfd26f2b3ba refs/tags/v1.3.4-rc1
-+^699f05125509249072a0b865c8d35520d97cd501
-+69be245e15510af0756aafb01020f9752ff7e066 refs/tags/v1.3.4-rc2
-+^4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
-+624c2d518b6dfc652db6fcbc969bbd93f9821322 refs/tags/v2008.10
-+^b59b16ca24bc7e77ec113021a6d77b9b32fcf192
-+3033c74cb0ad3dfbb1733a36f72f2f4496ba1863 refs/tags/v2008.10-rc1
-+^8b9e4787641719d709bfa2ebeb72e8bd4952bee7
-+2071c4239c250da6c8cbc93aa1d74b503acb2507 refs/tags/v2008.10-rc2
-+^c0d2f87d6c450128b88e73eea715fa3654f65b6c
-+789d45f945bc37e721b91923388a91a4f4fcbedb refs/tags/v2008.10-rc3
-+^b4dbacf69a669a17487054552fc2761149dd6767
-+c2d264a1e4540f09e7098a42d094bf6724567043 refs/tags/v2009.01
-+^72d15e705bc3983884105cb7755c7ba80e74a0a5
-+866b1cc6f942be4e2669c17e390cd552abc68e3e refs/tags/v2009.01-rc1
-+^aced78d852d0b009e8aaa1445af8cb40861ee549
-+35ca1e5e625049dbad16ce4cb273e5af47706a23 refs/tags/v2009.01-rc2
-+^0e3ece33801e377be67ffa29f083421ad820f28b
-+79f73ea6d9d81ce14a839fa4cc24d1a3ad0975fc refs/tags/v2009.01-rc3
-+^635e5f8fc82365e6e9734b3132bc95135a6de679
-+661e77d04058f94336f621e41b7b341a3b503833 refs/tags/v2009.03
-+^e60beb13cf0135dc71c541021487b5ccc4d269cb
-+0eb92888fc505ffc6bc58a5e7bedc0ae127279fa refs/tags/v2009.03-rc1
-+^32688e572ff96715b41420e9a7f280db6c399b65
-+0e34d8aa7974c11a5fd9afe983e9c277e02ef358 refs/tags/v2009.03-rc2
-+^b3dd629e78870ba2dc9f8032978721c0fa02a856
-+d70da93b038dbee50cb3e84cc0db25aab424a772 refs/tags/v2009.06
-+^6b1f78ae6ad037382ad430b07064105c88f7ac02
-+4cb5ec6e36792f300ecbe4e67eb6931848e0bace refs/tags/v2009.06-rc1
-+^6b8edfde22acc574b5532e9f086e6a7287a9bc78
-+210d415558d01a195f98360b127e3f4eb3bb933b refs/tags/v2009.06-rc2
-+^a2e0ffcf2d9a22c582a93e84a4bef20fd3877f47
-+95bd78f93cfc903186e88fc58deac036c401cfbc refs/tags/v2009.06-rc3
-+^580611cb0932143fc2d7a735cfa9ce1ef34d6002
-+e99ab567a1a6848b871a9af8cab3ad2c0c49647a refs/tags/v2009.08
-+^3d35d87d5482de23cd5dc4d7721b1086107cae50
-+e2447f7b3a5336462dd3bebf9a10fc368461b023 refs/tags/v2009.08-rc1
-+^94978e19f31d225b4f7d97c4acbac1ecfaeb8f69
-+6f03d260e53b1263471e5c3e690ddfe43b53d959 refs/tags/v2009.08-rc2
-+^eb1a4d0a471505c169bef19a73a60f8641f0b875
-+9ab87511114da4af82dbdf745edc7478d3e3f274 refs/tags/v2009.08-rc3
-+^963f2f611741f8d9c38bd7caf20ae8c95cab7b3f
-+bd1e74b1989e22fe19f8809cacfbf9cbbf4eaf20 refs/tags/v2009.11
-+^a200a7c04d89853d2a1395b96d8ca5e3dd754551
-+815f048382dc123c29baa41238a89f820876bf1e refs/tags/v2009.11-rc1
-+^4946775c6db52dba28f72ba3525764b54f1d4593
-+4c682c60e20b5624868ed6aa214d073cfb8dc0a6 refs/tags/v2009.11-rc2
-+^0fc52948bda0734431cb528ee4fd82f1dec8c7b5
-+9fd828dddea4306b99670d07366fe3f7c1052d08 refs/tags/v2009.11.1
-+^f20393c5e787b3776c179d20f82a86bda124d651
-+65bc917e953601b09965e5fcdfbe4f6c75547e50 refs/tags/v2010.03
-+^ca6e1c136ddb720c3bb2cc043b99f7f06bc46c55
-+537c2a51feed445384aa43e482e4ddc0b5549a75 refs/tags/v2010.03-rc1
-+^93910edb595a88d394da3eb2cf5148096155dfe9
-+273a6decf55982f7a5263d17559b94281f36caf7 refs/tags/v2010.03-rc2
-+^152dda3d94e97ede7af3f9560a59a659384d4585
-+3ef91195a43e6a229290977d70bb913008db2dc9 refs/tags/v2010.03-rc3
-+^2883cc2d48e99fd1873ef8af03fee7966611b735
-+41d5718ee6fb36a1282cde6c86b55f83b62278e1 refs/tags/v2010.06
-+^a59e27997637a2395ae2cc7f809127f24119a167
-+096e50e0a8934f4e083d43d5711d611eebe82607 refs/tags/v2010.06-rc1
-+^01f03bda5b22e5aeae5f02fd537da97a41485c73
-+a42fe9aa726cd3d64c3fcf11eea0bc531ee8d281 refs/tags/v2010.06-rc2
-+^a9046b9e1aeeedc66ddf1d00474ad0ce8c6aa6e4
-+17d61cb4e86f3dc4e7deaa0042fe6d6a6afff8f3 refs/tags/v2010.06-rc3
-+^482126e27b3dbf0e69a6445da8b94b3551adf05d
-+f7b386b1df73ff213287eed6ca1b74bb91da1b05 refs/tags/v2010.09
-+^1e4e5ef0469050f014aee1204dae8a9ab6053e49
-+c988fb931f8c8f5d9ce1fc6ca2c20219bcd0fc10 refs/tags/v2010.09-rc1
-+^2d941de9d5c7ba00dc19787dfa0aac2949fd00fb
-+09012d353eaf26310dc3ddb1915a3d3504ab9a27 refs/tags/v2010.09-rc2
-+^07517e7f4f582d1607adbc444bab75af3ac4a7f9
-+d0e3a3f4574f1f51ae3d7c5605b7ea5c6df929d4 refs/tags/v2010.12
-+^250ef029844be2cb98635f265359396866d1749f
-+5aeba5ba231ccceba84dd2311b1dae645b75bfdc refs/tags/v2010.12-rc1
-+^908614f20f7f0f5df736eed21b88e81ebbf14e86
-+a1904f2bc34e97d79483bcefc35b188620ee9089 refs/tags/v2010.12-rc2
-+^d0d2271f8c62e830ec65fb069b6d12dd708e3e2f
-+9bde025ff24c811c02d2a7e6451a57ea63895b3a refs/tags/v2010.12-rc3
-+^3ac45988ab1605baaf83bd3acb80a197c9a208c2
-+b29fbb347698286935bfc401c08499a6f63479de refs/tags/v2011.03
-+^19b54a701811220221fc4d5089a2bb18892018ca
-+2360c73ed79d91fe75c297c8a62b2810e8eef281 refs/tags/v2011.03-rc1
-+^42d44f631c4e8e5359775bdc098f2fffde4e5c05
-+38c5af4db86a3e7feaff5092b136722c53784c03 refs/tags/v2011.03-rc2
-+^cb815e5ff979e36d68df130a810d34de4bf93289
-+54d5e1052f16fe5e3337600f485b13b4c6204972 refs/tags/v2011.06
-+^b1af6f532e0d348b153d5c148369229d24af361a
-+4d0984f19a46afd17d1ca843deacc5bbedd95eda refs/tags/v2011.06-rc1
-+^7a82c208143bbc774ffcb4e53239410f867a0794
-+1b885e3346f4e06463949dcca3f9444d3d76eeda refs/tags/v2011.06-rc2
-+^6f4dd40cddbd69c56fec1285fee02cbd5a3833d8
-+0431724fde21417139eb1209ea8b562235c64c6e refs/tags/v2011.06-rc3
-+^79cfe422615c010a75ece41662a05cd432ada389
-+58fb473021fd5377db6cb934ea7032da885f80b7 refs/tags/v2011.09
-+^1d5e7fb403257d62f0f2419cb83fdf6b0f02f215
-+86773b53d37288d8ad16f27b93fd948ff11f8012 refs/tags/v2011.09-rc1
-+^6ceb0135f96d73063ffbaab5be7ce23933367388
-+00e61f6907d4ecc2e41f4ba61da74e7cc8665e29 refs/tags/v2011.09-rc2
-+^bc196029f53c2d82eb9a12eb8b66e696b6284941
-+d0b049d45ae734fa473894ae6fd9f4d7d2437cc5 refs/tags/v2011.12
-+^cba9a894fdb1cb49b60fcd1d1d6919cbd7995dd5
-+ee26bfcef5eb5cb4481eb073924cddc22ea2e423 refs/tags/v2011.12-rc1
-+^5738946be46c513fd945d3e1d8f8a0fa718b7c58
-+db9c62b847eab7d42b396ee59cbf4e5e75f02fc6 refs/tags/v2011.12-rc2
-+^901de79a3792c81aefcbf207a34049e63f21362b
-+d18276f86b5bed7646749a6a81ae94af79578d5f refs/tags/v2011.12-rc3
-+^be662e9a6b7bf27cb7bc06de18f3c51b2ea80160
-+5910ada22359d6cd06b9299f1ef6020a1ea2b893 refs/tags/v2012.04
-+^2790bf69dc12fb9aeb9836904e5f57c7f83d5552
-+bf41e44b53ad476c47da12f985115d2f073c716d refs/tags/v2012.04-rc1
-+^c008b6f6dd6b8965e9a7654ffbce75bb9ff7a3b5
-+b9c6ec5eb3eaa4471b32e92f48d6df2867020738 refs/tags/v2012.04-rc2
-+^f5cdc11775c4b7fdbf52a6dd2f463d329804ab11
-+d2062de0a3356d2e5c4b9ee6b7c805f0ac5cef37 refs/tags/v2012.04-rc3
-+^fb14b6b2f680363678b4e6a75eb9f3f0d79111fa
-+b75d3092239fc5e0e05571d91a380eb8d90d2f45 refs/tags/v2012.04.01
-+^415d386877df49eb051b85ef74fa59a16dc17c7d
-+d8679b1a4e01cfc7e90be484f4feafdcf153f3a1 refs/tags/v2012.07
-+^190649fb4309d1bc0fe7732fd0f951cb6440f935
-+ea406aa0f20923152f447108f189bd6e84f2b082 refs/tags/v2012.07-rc1
-+^211e47549b668c7cdd8658c0413a272f0d0495d4
-+5f4bc90c127618f5022d0086d329bbacab9c2b9b refs/tags/v2012.07-rc2
-+^8b10652d6d9cc05023b5a6b73840078066f95a50
-+473fff580bfa77b2f4b4dcecbb63ede28f8da5fa refs/tags/v2012.07-rc3
-+^c627faf637f5fe091bdb6846a52b16983e97b262
-+5aad5045f59029384c11058970caa31de2cfa514 refs/tags/v2012.10
-+^6528ff0109d81c1f21d20f9f1370782bccf87bcb
-+91c92e05eb518c1697c64e30e6887aa59a4fde44 refs/tags/v2012.10-rc1
-+^ee1f4caaa2a3f79d692155eec8a4c7289d60e106
-+3b07d3f76ca3b0bb41b463291f8456918ecc7df9 refs/tags/v2012.10-rc2
-+^221953d41dea8dce027b9ce6beee700d97ac2c83
-+7f2daf884129488975dd5f41d87730b26532e128 refs/tags/v2012.10-rc3
-+^c7c63221439ad87a8c05e7b42f9eae32ec7cc2d4
-+35c192cf449860aec8766e20a51bf2052a1dc968 refs/tags/v2013.01
-+^3a9d879f6f64585b819af728b53be0a05037fe0d
-+02eac6cbf79f854495705a5cf074b9b31ebdef47 refs/tags/v2013.01-rc1
-+^3ae7b240ad8c723d02aa79654220a07049b7ae4d
-+e99406154b90847a729cfef176c5b0681b8fbf62 refs/tags/v2013.01-rc2
-+^ebbf0d20aa85f623c49b7ed3349ebfea450c152d
-+32811f96f8259013d054deddb4d3b67a3d3092aa refs/tags/v2013.01-rc3
-+^6fb4d74e59750b43f00d460c569e8a30c67c5bb0
-+8512592e47cc968d2d6eb788acde761ebc3acbf6 refs/tags/v2013.01.01
-+^e8ae0fa5edd152b2b29c470b88429be4cdcd2c46
-+eb34b5ea26363ff349dee46ec6fb90fbc2198495 refs/tags/v2013.04
-+^d10f68ae47b67acab8b110b5c605dde4197a1820
-+734a826d8508b7ca8131381f1fb9ad36e7e98432 refs/tags/v2013.04-rc1
-+^2536850d7cd90bdb75bf3ff86838f913392b68db
-+8a7f04c4b3fe8ecb0b8af5c285cd2e252f60482e refs/tags/v2013.04-rc2
-+^c8142633e169665b246352918df5b76fd243bb71
-+83be647fa85edeb64c98d2d61114ca30de30e308 refs/tags/v2013.04-rc3
-+^cba6494f24d711ba63afb22b1ee691a41fee121c
-+9e96446a0bf49683dad66708579873a3b6c4f068 refs/tags/v2013.07
-+^62c175fbb8a0f9a926c88294ea9f7e88eb898f6c
-+7a42d4e7aa2788b653927904e03ec20793823a19 refs/tags/v2013.07-rc1
-+^216a793cc1702227fd4ad624080f585038d1fa45
-+4d5aaff0a76a07d28051134d7301d25a74a3a32e refs/tags/v2013.07-rc2
-+^e6bf18dba2a21bebf2c421b1c2e188225f6485a1
-+3060931a37a2417275a24400a6eb60abeb1a176a refs/tags/v2013.07-rc3
-+^68c517eafcb060aa8ef92ed2620f0f41c5275d89
-+2d65a6b5a3f069ea92ee33c1c925d79610af12d0 refs/tags/v2013.10
-+^183acb700378a8cfc5d50a01a65de93fb2c24586
-+ff92b6e5cf51421163e4ea1d29004eeffd6b6a99 refs/tags/v2013.10-rc1
-+^40a60c6e8bdd00330310eaa351c9391e74d0bc2c
-+bab9dca36165be177a74ff31eabda75f94e26599 refs/tags/v2013.10-rc2
-+^fb18fa95a14ae875ef0a5421cd9fecc00c7c3a4c
-+c1d48b0698c9b7ddf342f5808d3a4a973317c2dc refs/tags/v2013.10-rc3
-+^46ef4faed18196472eb95216b2f74c1397ecf024
-+c99ec7332286341649cd5337eb1bbeabdff13a3a refs/tags/v2013.10-rc4
-+^0c5274e6f3231a3a28dafc1204b3f71a3534c520
-+e3fbee81eccebfd6c91609f6bc4b4aec3a017131 refs/tags/v2014.01
-+^b44bd2c73c4cfb6e3b9e7f8cf987e8e39aa74a0b
-+0b3dd5f23cf6eeb9ec84da8c77d8c7d1e7d23680 refs/tags/v2014.01-rc1
-+^d19ad726bcd5d9106f7ba9c750462fcc369f1020
-+e68eecb2d896ddef422984ae6d52793099b74e9a refs/tags/v2014.01-rc2
-+^fd44194945714a478fab6407c04453caaef0bac9
-+5f60aba0d3f6b827de8dc7e0850c1050f655b572 refs/tags/v2014.01-rc3
-+^cddb6b8304bfbc34f43920051256de7fe6c4c0ab
-+5b3ba909f4f881add7756d820f2eb67d3e31b112 refs/tags/v2014.04
-+^dda0dbfc69f3d560c87f5be85f127ed862ea6721
-+9574fdf82ff62a7086b257c89c01bde937a0c45e refs/tags/v2014.04-rc1
-+^0a8e823ad0c5a602c93c2e8a54caf622ade6d3fb
-+4017dac218f34783977c36af8f65984a57ace7e3 refs/tags/v2014.04-rc2
-+^8ee950dd273aef6a074d41bf2ee4ef11d6f848fb
-+ba34c9404626f23a41ef07bcdf3e7e5cbf133b82 refs/tags/v2014.04-rc3
-+^c494eaf409cb8db9a5a513e9bdfac20b7a83daca
-+590a74953a76f2b4cc552bd85b475ea54ba02f66 refs/tags/v2014.07
-+^524123a70761110c5cf3ccc5f52f6d4da071b959
-+2db93972561773246cb7498bf1ee73e3d34fa697 refs/tags/v2014.07-rc1
-+^3e41c54ad8099951d57c3c5a0f5ebc6e8becf70c
-+3472f37f1ce4d2737476b4ec7c768c04afe20046 refs/tags/v2014.07-rc2
-+^0116f40bbc269c57566d69e0db8cb9da2e194d33
-+d3b233a6a320688e22419134d6f7bb23e9c0332b refs/tags/v2014.07-rc3
-+^76b21026ceb5a6a83fc53b0ecdf425f240318022
-+9019e02a9d98f6788035ea352289a5afdbbf133d refs/tags/v2014.07-rc4
-+^a176ff0705351bf6d993a8f15e081bfa2ba2e1af
-+d96885d68127e270d16484c0fbc252953a2bf2e8 refs/tags/v2014.10
-+^c43fd23cf619856b0763a64a6a3bcf3663058c49
-+49fe41ad45d09cf083db39ce4a2653d903fbe1a7 refs/tags/v2014.10-rc1
-+^e76b933e02e1b38e48754c435e9dba1c0deeb3c6
-+8d6f7381cd8f915f6599044b1848a8a6a7faff02 refs/tags/v2014.10-rc2
-+^d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6
-+1f254ba729e8b21ccba3c9caf02bf358a0e8d136 refs/tags/v2014.10-rc3
-+^742de9076e8a8f44b77794b43e6175d86b897996
-+a013989f700d43f79af64fb74b05b2f333a60c7d refs/tags/v2015.01-rc1
-+^9906090f527153afddc5aa64d37cb5f89c6ee129
-+77831f3e5f83e12b4e7df418e7d43977b189031d refs/tags/v2015.01-rc2
-+^2a82ec77d27ef5f860a107c4b764643a655dceeb
-+ecb091a9035a9c89a57b7fbd6cdf1db1c5ee9a80 refs/tags/v2015.01-rc3
-+^32fdf0e4d82bdca5d64d86330e461e59685f9959
-+9305547115a8073900fec5e8f3938b93c675f2c2 refs/tags/v2015.01-rc4
-+^125738e819a3b9d15210794b3dcef9f4d9bcf866
-diff -ruN u-boot-2015.01-rc3/.git/refs/heads/master u-boot/.git/refs/heads/master
---- u-boot-2015.01-rc3/.git/refs/heads/master 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/refs/heads/master 2015-01-01 17:34:31.953508170 +0100
-@@ -0,0 +1 @@
-+125738e819a3b9d15210794b3dcef9f4d9bcf866
-diff -ruN u-boot-2015.01-rc3/.git/refs/remotes/origin/HEAD u-boot/.git/refs/remotes/origin/HEAD
---- u-boot-2015.01-rc3/.git/refs/remotes/origin/HEAD 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/.git/refs/remotes/origin/HEAD 2015-01-01 17:34:31.937508433 +0100
-@@ -0,0 +1 @@
-+ref: refs/remotes/origin/master
-diff -ruN u-boot-2015.01-rc3/include/common.h u-boot/include/common.h
---- u-boot-2015.01-rc3/include/common.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/common.h 2015-01-01 17:34:32.757494989 +0100
-@@ -70,12 +70,6 @@
- #ifdef CONFIG_4xx
- #include <asm/ppc4xx.h>
- #endif
--#ifdef CONFIG_ARM
--#define asmlinkage /* nothing */
--#endif
--#ifdef CONFIG_X86
--#define asmlinkage __attribute__((regparm(0)))
--#endif
- #ifdef CONFIG_BLACKFIN
- #include <asm/blackfin.h>
- #endif
-diff -ruN u-boot-2015.01-rc3/include/config_fallbacks.h u-boot/include/config_fallbacks.h
---- u-boot-2015.01-rc3/include/config_fallbacks.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/config_fallbacks.h 2015-01-01 17:34:32.757494989 +0100
-@@ -79,6 +79,10 @@
- #define CONFIG_SYS_PROMPT "=> "
- #endif
-
-+#ifndef CONFIG_SYS_PBSIZE
-+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 128)
-+#endif
-+
- #ifndef CONFIG_FIT_SIGNATURE
- #define CONFIG_IMAGE_FORMAT_LEGACY
- #endif
-@@ -87,4 +91,10 @@
- #undef CONFIG_IMAGE_FORMAT_LEGACY
- #endif
-
-+#ifdef CONFIG_DM_I2C
-+# ifdef CONFIG_SYS_I2C
-+# error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used"
-+# endif
-+#endif
-+
- #endif /* __CONFIG_FALLBACKS_H */
-diff -ruN u-boot-2015.01-rc3/include/configs/alt.h u-boot/include/configs/alt.h
---- u-boot-2015.01-rc3/include/configs/alt.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/alt.h 2015-01-01 17:34:32.777494661 +0100
-@@ -95,4 +95,23 @@
- #define CONFIG_USB_EHCI_RMOBILE
- #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-
-+/* MMCIF */
-+#define CONFIG_MMC
-+#define CONFIG_GENERIC_MMC
-+#define CONFIG_CMD_MMC
-+
-+#define CONFIG_SH_MMCIF
-+#define CONFIG_SH_MMCIF_ADDR 0xee200000
-+#define CONFIG_SH_MMCIF_CLK 48000000
-+
-+/* Module stop status bits */
-+/* INTC-RT */
-+#define CONFIG_SMSTP0_ENA 0x00400000
-+/* MSIF */
-+#define CONFIG_SMSTP2_ENA 0x00002000
-+/* INTC-SYS, IRQC */
-+#define CONFIG_SMSTP4_ENA 0x00000180
-+/* SCIF2 */
-+#define CONFIG_SMSTP7_ENA 0x00080000
-+
- #endif /* __ALT_H */
-diff -ruN u-boot-2015.01-rc3/include/configs/apalis_t30.h u-boot/include/configs/apalis_t30.h
---- u-boot-2015.01-rc3/include/configs/apalis_t30.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/apalis_t30.h 2015-01-01 17:34:32.777494661 +0100
-@@ -26,10 +26,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/configs/B4860QDS.h u-boot/include/configs/B4860QDS.h
---- u-boot-2015.01-rc3/include/configs/B4860QDS.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/B4860QDS.h 2015-01-01 17:34:32.757494989 +0100
-@@ -641,6 +641,14 @@
- #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
- #endif
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
- #define CONFIG_SYS_QMAN_NUM_PORTALS 25
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
- #ifdef CONFIG_PHYS_64BIT
-@@ -649,6 +657,14 @@
- #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
- #endif
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
-
-diff -ruN u-boot-2015.01-rc3/include/configs/beaver.h u-boot/include/configs/beaver.h
---- u-boot-2015.01-rc3/include/configs/beaver.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/beaver.h 2015-01-01 17:34:32.781494596 +0100
-@@ -40,10 +40,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/configs/BSC9131RDB.h u-boot/include/configs/BSC9131RDB.h
---- u-boot-2015.01-rc3/include/configs/BSC9131RDB.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/BSC9131RDB.h 2015-01-01 17:34:32.757494989 +0100
-@@ -11,6 +11,9 @@
- #ifndef __CONFIG_H
- #define __CONFIG_H
-
-+#define CONFIG_SYS_GENERIC_BOARD
-+#define CONFIG_DISPLAY_BOARDINFO
-+
- #ifdef CONFIG_BSC9131RDB
- #define CONFIG_BSC9131
- #define CONFIG_NAND_FSL_IFC
-diff -ruN u-boot-2015.01-rc3/include/configs/BSC9132QDS.h u-boot/include/configs/BSC9132QDS.h
---- u-boot-2015.01-rc3/include/configs/BSC9132QDS.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/BSC9132QDS.h 2015-01-01 17:34:32.761494923 +0100
-@@ -11,6 +11,9 @@
- #ifndef __CONFIG_H
- #define __CONFIG_H
-
-+#define CONFIG_SYS_GENERIC_BOARD
-+#define CONFIG_DISPLAY_BOARDINFO
-+
- #ifdef CONFIG_BSC9132QDS
- #define CONFIG_BSC9132
- #endif
-diff -ruN u-boot-2015.01-rc3/include/configs/cardhu.h u-boot/include/configs/cardhu.h
---- u-boot-2015.01-rc3/include/configs/cardhu.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/cardhu.h 2015-01-01 17:34:32.785494529 +0100
-@@ -43,12 +43,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_I2C_MULTI_BUS
--#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/configs/chromebook_link.h u-boot/include/configs/chromebook_link.h
---- u-boot-2015.01-rc3/include/configs/chromebook_link.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/chromebook_link.h 2015-01-01 17:34:32.785494529 +0100
-@@ -25,10 +25,10 @@
-
- #define CONFIG_X86_RESET_VECTOR
- #define CONFIG_NR_DRAM_BANKS 8
--#define CONFIG_X86_MRC_START 0xfffa0000
-+#define CONFIG_X86_MRC_ADDR 0xfffa0000
- #define CONFIG_CACHE_MRC_SIZE_KB 512
-
--#define CONFIG_COREBOOT_SERIAL
-+#define CONFIG_X86_SERIAL
-
- #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \
- PCI_DEVICE_ID_INTEL_NM10_AHCI}, \
-@@ -39,7 +39,7 @@
- {PCI_VENDOR_ID_INTEL, \
- PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
-
--#define CONFIG_X86_OPTION_ROM_FILENAME pci8086,0166.bin
-+#define CONFIG_X86_OPTION_ROM_FILE pci8086,0166.bin
- #define CONFIG_X86_OPTION_ROM_ADDR 0xfff90000
- #define CONFIG_VIDEO_X86
-
-diff -ruN u-boot-2015.01-rc3/include/configs/colibri_t30.h u-boot/include/configs/colibri_t30.h
---- u-boot-2015.01-rc3/include/configs/colibri_t30.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/colibri_t30.h 2015-01-01 17:34:32.785494529 +0100
-@@ -25,10 +25,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/configs/coreboot.h u-boot/include/configs/coreboot.h
---- u-boot-2015.01-rc3/include/configs/coreboot.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/coreboot.h 2015-01-01 17:34:32.785494529 +0100
-@@ -49,7 +49,7 @@
- {PCI_VENDOR_ID_INTEL, \
- PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
-
--#define CONFIG_COREBOOT_SERIAL
-+#define CONFIG_X86_SERIAL
-
- #define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \
- "stdout=vga,serial,cbmem\0" \
-diff -ruN u-boot-2015.01-rc3/include/configs/corenet_ds.h u-boot/include/configs/corenet_ds.h
---- u-boot-2015.01-rc3/include/configs/corenet_ds.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/corenet_ds.h 2015-01-01 17:34:32.785494529 +0100
-@@ -495,6 +495,14 @@
- #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
- #endif
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
- #define CONFIG_SYS_QMAN_NUM_PORTALS 10
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
- #ifdef CONFIG_PHYS_64BIT
-@@ -503,6 +511,14 @@
- #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
- #endif
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
- #define CONFIG_SYS_DPAA_PME
-diff -ruN u-boot-2015.01-rc3/include/configs/crownbay.h u-boot/include/configs/crownbay.h
---- u-boot-2015.01-rc3/include/configs/crownbay.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/include/configs/crownbay.h 2015-01-01 17:34:32.785494529 +0100
-@@ -0,0 +1,61 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+/*
-+ * board/config.h - configuration options, board specific
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#include <configs/x86-common.h>
-+
-+#define CONFIG_SYS_MONITOR_LEN (1 << 20)
-+#define CONFIG_SYS_X86_START16 0xfffff800
-+#define CONFIG_BOARD_EARLY_INIT_F
-+
-+#define CONFIG_X86_RESET_VECTOR
-+#define CONFIG_NR_DRAM_BANKS 1
-+
-+#define CONFIG_X86_SERIAL
-+#define CONFIG_SMSC_LPC47M
-+
-+#define CONFIG_PCI_MEM_BUS 0x40000000
-+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
-+#define CONFIG_PCI_MEM_SIZE 0x80000000
-+
-+#define CONFIG_PCI_PREF_BUS 0xc0000000
-+#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS
-+#define CONFIG_PCI_PREF_SIZE 0x20000000
-+
-+#define CONFIG_PCI_IO_BUS 0x2000
-+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
-+#define CONFIG_PCI_IO_SIZE 0xe000
-+
-+#define CONFIG_SYS_EARLY_PCI_INIT
-+#define CONFIG_PCI_PNP
-+#define CONFIG_E1000
-+
-+#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \
-+ "stdout=serial\0" \
-+ "stderr=serial\0"
-+
-+#define CONFIG_SCSI_DEV_LIST \
-+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
-+
-+#define CONFIG_SPI_FLASH_SST
-+
-+#define CONFIG_MMC
-+#define CONFIG_SDHCI
-+#define CONFIG_GENERIC_MMC
-+#define CONFIG_MMC_SDMA
-+#define CONFIG_CMD_MMC
-+
-+/* Video is not supported */
-+#undef CONFIG_VIDEO
-+#undef CONFIG_CFB_CONSOLE
-+
-+#endif /* __CONFIG_H */
-diff -ruN u-boot-2015.01-rc3/include/configs/dalmore.h u-boot/include/configs/dalmore.h
---- u-boot-2015.01-rc3/include/configs/dalmore.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/dalmore.h 2015-01-01 17:34:32.789494465 +0100
-@@ -36,12 +36,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_I2C_MULTI_BUS
--#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/configs/gose.h u-boot/include/configs/gose.h
---- u-boot-2015.01-rc3/include/configs/gose.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/gose.h 2015-01-01 17:34:32.793494399 +0100
-@@ -91,4 +91,14 @@
- #define CONFIG_USB_EHCI_RMOBILE
- #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-
-+/* Module stop status bits */
-+/* INTC-RT */
-+#define CONFIG_SMSTP0_ENA 0x00400000
-+/* MSIF */
-+#define CONFIG_SMSTP2_ENA 0x00002000
-+/* INTC-SYS, IRQC */
-+#define CONFIG_SMSTP4_ENA 0x00000180
-+/* SCIF0 */
-+#define CONFIG_SMSTP7_ENA 0x00200000
-+
- #endif /* __GOSE_H */
-diff -ruN u-boot-2015.01-rc3/include/configs/jetson-tk1.h u-boot/include/configs/jetson-tk1.h
---- u-boot-2015.01-rc3/include/configs/jetson-tk1.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/jetson-tk1.h 2015-01-01 17:34:32.797494333 +0100
-@@ -25,12 +25,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_I2C_MULTI_BUS
--#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/configs/km/kmp204x-common.h u-boot/include/configs/km/kmp204x-common.h
---- u-boot-2015.01-rc3/include/configs/km/kmp204x-common.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/km/kmp204x-common.h 2015-01-01 17:34:32.797494333 +0100
-@@ -339,10 +339,26 @@
- #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
- #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
- #define CONFIG_SYS_QMAN_NUM_PORTALS 10
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
- #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
- #define CONFIG_SYS_DPAA_PME
-diff -ruN u-boot-2015.01-rc3/include/configs/koelsch.h u-boot/include/configs/koelsch.h
---- u-boot-2015.01-rc3/include/configs/koelsch.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/koelsch.h 2015-01-01 17:34:32.797494333 +0100
-@@ -92,4 +92,15 @@
- #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
- #define CONFIG_USB_STORAGE
-
-+
-+/* Module stop status bits */
-+/* INTC-RT */
-+#define CONFIG_SMSTP0_ENA 0x00400000
-+/* MSIF*/
-+#define CONFIG_SMSTP2_ENA 0x00002000
-+/* INTC-SYS, IRQC */
-+#define CONFIG_SMSTP4_ENA 0x00000180
-+/* SCIF0 */
-+#define CONFIG_SMSTP7_ENA 0x00200000
-+
- #endif /* __KOELSCH_H */
-diff -ruN u-boot-2015.01-rc3/include/configs/lager.h u-boot/include/configs/lager.h
---- u-boot-2015.01-rc3/include/configs/lager.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/lager.h 2015-01-01 17:34:32.797494333 +0100
-@@ -93,4 +93,23 @@
- #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
- #define CONFIG_USB_STORAGE
-
-+/* MMC */
-+#define CONFIG_MMC
-+#define CONFIG_CMD_MMC
-+#define CONFIG_GENERIC_MMC
-+
-+#define CONFIG_SH_MMCIF
-+#define CONFIG_SH_MMCIF_ADDR 0xEE220000
-+#define CONFIG_SH_MMCIF_CLK 97500000
-+
-+/* Module stop status bits */
-+/* INTC-RT */
-+#define CONFIG_SMSTP0_ENA 0x00400000
-+/* MSIF */
-+#define CONFIG_SMSTP2_ENA 0x00002000
-+/* INTC-SYS, IRQC */
-+#define CONFIG_SMSTP4_ENA 0x00000180
-+/* SCIF0 */
-+#define CONFIG_SMSTP7_ENA 0x00200000
-+
- #endif /* __LAGER_H */
-diff -ruN u-boot-2015.01-rc3/include/configs/ls1021aqds.h u-boot/include/configs/ls1021aqds.h
---- u-boot-2015.01-rc3/include/configs/ls1021aqds.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/ls1021aqds.h 2015-01-01 17:34:32.797494333 +0100
-@@ -37,8 +37,85 @@
- unsigned long get_board_ddr_clk(void);
- #endif
-
-+#ifdef CONFIG_QSPI_BOOT
-+#define CONFIG_SYS_CLK_FREQ 100000000
-+#define CONFIG_DDR_CLK_FREQ 100000000
-+#define CONFIG_QIXIS_I2C_ACCESS
-+#else
- #define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
- #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
-+#endif
-+
-+#ifdef CONFIG_RAMBOOT_PBL
-+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021aqds/ls102xa_pbi.cfg
-+#endif
-+
-+#ifdef CONFIG_SD_BOOT
-+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
-+#define CONFIG_SPL_FRAMEWORK
-+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
-+#define CONFIG_SPL_LIBCOMMON_SUPPORT
-+#define CONFIG_SPL_LIBGENERIC_SUPPORT
-+#define CONFIG_SPL_ENV_SUPPORT
-+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-+#define CONFIG_SPL_I2C_SUPPORT
-+#define CONFIG_SPL_WATCHDOG_SUPPORT
-+#define CONFIG_SPL_SERIAL_SUPPORT
-+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-+#define CONFIG_SPL_MMC_SUPPORT
-+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
-+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
-+
-+#define CONFIG_SPL_TEXT_BASE 0x10000000
-+#define CONFIG_SPL_MAX_SIZE 0x1a000
-+#define CONFIG_SPL_STACK 0x1001d000
-+#define CONFIG_SPL_PAD_TO 0x1c000
-+#define CONFIG_SYS_TEXT_BASE 0x82000000
-+
-+#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
-+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
-+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-+#define CONFIG_SYS_MONITOR_LEN 0x80000
-+#endif
-+
-+#ifdef CONFIG_QSPI_BOOT
-+#define CONFIG_SYS_TEXT_BASE 0x40010000
-+#define CONFIG_SYS_NO_FLASH
-+#endif
-+
-+#ifdef CONFIG_NAND_BOOT
-+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
-+#define CONFIG_SPL_FRAMEWORK
-+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
-+#define CONFIG_SPL_LIBCOMMON_SUPPORT
-+#define CONFIG_SPL_LIBGENERIC_SUPPORT
-+#define CONFIG_SPL_ENV_SUPPORT
-+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-+#define CONFIG_SPL_I2C_SUPPORT
-+#define CONFIG_SPL_WATCHDOG_SUPPORT
-+#define CONFIG_SPL_SERIAL_SUPPORT
-+#define CONFIG_SPL_NAND_SUPPORT
-+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-+
-+#define CONFIG_SPL_TEXT_BASE 0x10000000
-+#define CONFIG_SPL_MAX_SIZE 0x1a000
-+#define CONFIG_SPL_STACK 0x1001d000
-+#define CONFIG_SPL_PAD_TO 0x1c000
-+#define CONFIG_SYS_TEXT_BASE 0x82000000
-+
-+#define CONFIG_SYS_NAND_U_BOOT_SIZE (400 << 10)
-+#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
-+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-+
-+#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
-+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
-+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-+#define CONFIG_SYS_MONITOR_LEN 0x80000
-+#endif
-
- #ifndef CONFIG_SYS_TEXT_BASE
- #define CONFIG_SYS_TEXT_BASE 0x67f80000
-@@ -71,13 +148,15 @@
-
- #define CONFIG_FSL_CAAM /* Enable CAAM */
-
--#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
-+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
-+ !defined(CONFIG_QSPI_BOOT)
- #define CONFIG_U_QE
- #endif
-
- /*
- * IFC Definitions
- */
-+#ifndef CONFIG_QSPI_BOOT
- #define CONFIG_FSL_IFC
- #define CONFIG_SYS_FLASH_BASE 0x60000000
- #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
-@@ -170,6 +249,7 @@
- #define CONFIG_CMD_NAND
-
- #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
-+#endif
-
- /*
- * QIXIS Definitions
-@@ -214,6 +294,40 @@
- #define CONFIG_SYS_FPGA_FTIM3 0x0
- #endif
-
-+#if defined(CONFIG_NAND_BOOT)
-+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
-+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
-+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
-+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
-+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
-+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
-+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
-+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
-+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
-+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR
-+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
-+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
-+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
-+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
-+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
-+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
-+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT
-+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR
-+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
-+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
-+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
-+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
-+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
-+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
-+#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT
-+#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR
-+#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK
-+#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR
-+#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0
-+#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
-+#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
-+#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
-+#else
- #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
- #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
- #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
-@@ -246,6 +360,7 @@
- #define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
- #define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
- #define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
-+#endif
-
- /*
- * Serial Port
-@@ -279,6 +394,21 @@
- #define CONFIG_FSL_ESDHC
- #define CONFIG_GENERIC_MMC
-
-+#define CONFIG_CMD_FAT
-+#define CONFIG_DOS_PARTITION
-+
-+/* QSPI */
-+#ifdef CONFIG_QSPI_BOOT
-+#define CONFIG_FSL_QSPI
-+#define QSPI0_AMBA_BASE 0x40000000
-+#define FSL_QSPI_FLASH_SIZE (1 << 24)
-+#define FSL_QSPI_FLASH_NUM 2
-+
-+#define CONFIG_CMD_SF
-+#define CONFIG_SPI_FLASH
-+#define CONFIG_SPI_FLASH_SPANSION
-+#endif
-+
- /*
- * USB
- */
-@@ -341,6 +471,14 @@
- #endif
-
- #endif
-+
-+/* PCIe */
-+#define CONFIG_PCI /* Enable PCI/PCIE */
-+#define CONFIG_PCIE1 /* PCIE controler 1 */
-+#define CONFIG_PCIE2 /* PCIE controler 2 */
-+#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
-+#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
-+
- #define CONFIG_CMD_PING
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
-@@ -348,7 +486,20 @@
-
- #define CONFIG_CMDLINE_TAG
- #define CONFIG_CMDLINE_EDITING
-+
-+#ifdef CONFIG_QSPI_BOOT
-+#undef CONFIG_CMD_IMLS
-+#else
- #define CONFIG_CMD_IMLS
-+#endif
-+
-+#define CONFIG_ARMV7_NONSEC
-+#define CONFIG_ARMV7_VIRT
-+#define CONFIG_PEN_ADDR_BIG_ENDIAN
-+#define CONFIG_LS102XA_NS_ACCESS
-+#define CONFIG_SMP_PEN_ADDR 0x01ee0200
-+#define CONFIG_TIMER_CLK_FREQ 12500000
-+#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
-
- #define CONFIG_HWCONFIG
- #define HWCONFIG_BUFFER_SIZE 128
-@@ -385,6 +536,8 @@
-
- #define CONFIG_SYS_LOAD_ADDR 0x82000000
-
-+#define CONFIG_LS102XA_STREAM_ID
-+
- /*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
-@@ -396,17 +549,37 @@
- #define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-+#ifdef CONFIG_SPL_BUILD
-+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-+#else
- #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-+#endif
-
- /*
- * Environment
- */
- #define CONFIG_ENV_OVERWRITE
-
-+#if defined(CONFIG_SD_BOOT)
-+#define CONFIG_ENV_OFFSET 0x100000
-+#define CONFIG_ENV_IS_IN_MMC
-+#define CONFIG_SYS_MMC_ENV_DEV 0
-+#define CONFIG_ENV_SIZE 0x2000
-+#elif defined(CONFIG_QSPI_BOOT)
-+#define CONFIG_ENV_IS_IN_SPI_FLASH
-+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
-+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
-+#define CONFIG_ENV_SECT_SIZE 0x10000
-+#elif defined(CONFIG_NAND_BOOT)
-+#define CONFIG_ENV_IS_IN_NAND
-+#define CONFIG_ENV_SIZE 0x2000
-+#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
-+#else
- #define CONFIG_ENV_IS_IN_FLASH
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
- #define CONFIG_ENV_SIZE 0x2000
- #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
-+#endif
-
- #define CONFIG_OF_LIBFDT
- #define CONFIG_OF_BOARD_SETUP
-diff -ruN u-boot-2015.01-rc3/include/configs/ls1021atwr.h u-boot/include/configs/ls1021atwr.h
---- u-boot-2015.01-rc3/include/configs/ls1021atwr.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/ls1021atwr.h 2015-01-01 17:34:32.797494333 +0100
-@@ -35,6 +35,43 @@
- #define CONFIG_SYS_CLK_FREQ 100000000
- #define CONFIG_DDR_CLK_FREQ 100000000
-
-+#ifdef CONFIG_RAMBOOT_PBL
-+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
-+#endif
-+
-+#ifdef CONFIG_SD_BOOT
-+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
-+#define CONFIG_SPL_FRAMEWORK
-+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
-+#define CONFIG_SPL_LIBCOMMON_SUPPORT
-+#define CONFIG_SPL_LIBGENERIC_SUPPORT
-+#define CONFIG_SPL_ENV_SUPPORT
-+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-+#define CONFIG_SPL_I2C_SUPPORT
-+#define CONFIG_SPL_WATCHDOG_SUPPORT
-+#define CONFIG_SPL_SERIAL_SUPPORT
-+#define CONFIG_SPL_MMC_SUPPORT
-+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
-+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
-+
-+#define CONFIG_SPL_TEXT_BASE 0x10000000
-+#define CONFIG_SPL_MAX_SIZE 0x1a000
-+#define CONFIG_SPL_STACK 0x1001d000
-+#define CONFIG_SPL_PAD_TO 0x1c000
-+#define CONFIG_SYS_TEXT_BASE 0x82000000
-+
-+#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
-+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
-+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-+#define CONFIG_SYS_MONITOR_LEN 0x80000
-+#endif
-+
-+#ifdef CONFIG_QSPI_BOOT
-+#define CONFIG_SYS_TEXT_BASE 0x40010000
-+#define CONFIG_SYS_NO_FLASH
-+#endif
-+
- #ifndef CONFIG_SYS_TEXT_BASE
- #define CONFIG_SYS_TEXT_BASE 0x67f80000
- #endif
-@@ -50,13 +87,15 @@
-
- #define CONFIG_FSL_CAAM /* Enable CAAM */
-
--#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
-+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
-+ !defined(CONFIG_QSPI_BOOT)
- #define CONFIG_U_QE
- #endif
-
- /*
- * IFC Definitions
- */
-+#ifndef CONFIG_QSPI_BOOT
- #define CONFIG_FSL_IFC
- #define CONFIG_SYS_FLASH_BASE 0x60000000
- #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
-@@ -100,6 +139,7 @@
-
- #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
- #define CONFIG_SYS_WRITE_SWAPPED_DATA
-+#endif
-
- /* CPLD */
-
-@@ -180,6 +220,21 @@
- #define CONFIG_FSL_ESDHC
- #define CONFIG_GENERIC_MMC
-
-+#define CONFIG_CMD_FAT
-+#define CONFIG_DOS_PARTITION
-+
-+/* QSPI */
-+#ifdef CONFIG_QSPI_BOOT
-+#define CONFIG_FSL_QSPI
-+#define QSPI0_AMBA_BASE 0x40000000
-+#define FSL_QSPI_FLASH_SIZE (1 << 24)
-+#define FSL_QSPI_FLASH_NUM 2
-+
-+#define CONFIG_CMD_SF
-+#define CONFIG_SPI_FLASH
-+#define CONFIG_SPI_FLASH_STMICRO
-+#endif
-+
- /*
- * Video
- */
-@@ -236,6 +291,13 @@
- #define CONFIG_HAS_ETH2
- #endif
-
-+/* PCIe */
-+#define CONFIG_PCI /* Enable PCI/PCIE */
-+#define CONFIG_PCIE1 /* PCIE controler 1 */
-+#define CONFIG_PCIE2 /* PCIE controler 2 */
-+#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
-+#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
-+
- #define CONFIG_CMD_PING
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_MII
-@@ -243,7 +305,20 @@
-
- #define CONFIG_CMDLINE_TAG
- #define CONFIG_CMDLINE_EDITING
-+
-+#ifdef CONFIG_QSPI_BOOT
-+#undef CONFIG_CMD_IMLS
-+#else
- #define CONFIG_CMD_IMLS
-+#endif
-+
-+#define CONFIG_ARMV7_NONSEC
-+#define CONFIG_ARMV7_VIRT
-+#define CONFIG_PEN_ADDR_BIG_ENDIAN
-+#define CONFIG_LS102XA_NS_ACCESS
-+#define CONFIG_SMP_PEN_ADDR 0x01ee0200
-+#define CONFIG_TIMER_CLK_FREQ 12500000
-+#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
-
- #define CONFIG_HWCONFIG
- #define HWCONFIG_BUFFER_SIZE 128
-@@ -277,6 +352,8 @@
-
- #define CONFIG_SYS_LOAD_ADDR 0x82000000
-
-+#define CONFIG_LS102XA_STREAM_ID
-+
- /*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
-@@ -288,7 +365,11 @@
- #define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-+#ifdef CONFIG_SPL_BUILD
-+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-+#else
- #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-+#endif
-
- #define CONFIG_SYS_QE_FW_ADDR 0x67f40000
-
-@@ -297,10 +378,22 @@
- */
- #define CONFIG_ENV_OVERWRITE
-
-+#if defined(CONFIG_SD_BOOT)
-+#define CONFIG_ENV_OFFSET 0x100000
-+#define CONFIG_ENV_IS_IN_MMC
-+#define CONFIG_SYS_MMC_ENV_DEV 0
-+#define CONFIG_ENV_SIZE 0x20000
-+#elif defined(CONFIG_QSPI_BOOT)
-+#define CONFIG_ENV_IS_IN_SPI_FLASH
-+#define CONFIG_ENV_SIZE 0x2000
-+#define CONFIG_ENV_OFFSET 0x100000
-+#define CONFIG_ENV_SECT_SIZE 0x10000
-+#else
- #define CONFIG_ENV_IS_IN_FLASH
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
- #define CONFIG_ENV_SIZE 0x20000
- #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
-+#endif
-
- #define CONFIG_OF_LIBFDT
- #define CONFIG_OF_BOARD_SETUP
-diff -ruN u-boot-2015.01-rc3/include/configs/mx53loco.h u-boot/include/configs/mx53loco.h
---- u-boot-2015.01-rc3/include/configs/mx53loco.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/mx53loco.h 2015-01-01 17:34:32.801494268 +0100
-@@ -94,6 +94,7 @@
- /* Command definition */
- #include <config_cmd_default.h>
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
-
- #undef CONFIG_CMD_IMLS
-
-diff -ruN u-boot-2015.01-rc3/include/configs/mx6sabre_common.h u-boot/include/configs/mx6sabre_common.h
---- u-boot-2015.01-rc3/include/configs/mx6sabre_common.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/mx6sabre_common.h 2015-01-01 17:34:32.801494268 +0100
-@@ -220,9 +220,6 @@
- #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
- #define CONFIG_AUTO_COMPLETE
- #define CONFIG_SYS_CBSIZE 256
--
--/* Print Buffer Size */
--#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
- #define CONFIG_SYS_MAXARGS 16
- #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-diff -ruN u-boot-2015.01-rc3/include/configs/mx6slevk.h u-boot/include/configs/mx6slevk.h
---- u-boot-2015.01-rc3/include/configs/mx6slevk.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/mx6slevk.h 2015-01-01 17:34:32.805494202 +0100
-@@ -209,6 +209,20 @@
- #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
- #endif
-
-+/* USB Configs */
-+#define CONFIG_CMD_USB
-+#ifdef CONFIG_CMD_USB
-+#define CONFIG_USB_EHCI
-+#define CONFIG_USB_EHCI_MX6
-+#define CONFIG_USB_STORAGE
-+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-+#define CONFIG_USB_HOST_ETHER
-+#define CONFIG_USB_ETHER_ASIX
-+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-+#define CONFIG_MXC_USB_FLAGS 0
-+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-+#endif
-+
- #define CONFIG_SYS_FSL_USDHC_NUM 3
- #if defined(CONFIG_ENV_IS_IN_MMC)
- #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/
-diff -ruN u-boot-2015.01-rc3/include/configs/mx6sxsabresd.h u-boot/include/configs/mx6sxsabresd.h
---- u-boot-2015.01-rc3/include/configs/mx6sxsabresd.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/mx6sxsabresd.h 2015-01-01 17:34:32.805494202 +0100
-@@ -198,6 +198,20 @@
- #define CONFIG_PHYLIB
- #define CONFIG_PHY_ATHEROS
-
-+
-+#define CONFIG_CMD_USB
-+#ifdef CONFIG_CMD_USB
-+#define CONFIG_USB_EHCI
-+#define CONFIG_USB_EHCI_MX6
-+#define CONFIG_USB_STORAGE
-+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-+#define CONFIG_USB_HOST_ETHER
-+#define CONFIG_USB_ETHER_ASIX
-+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-+#define CONFIG_MXC_USB_FLAGS 0
-+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-+#endif
-+
- #define CONFIG_CMD_PCI
- #ifdef CONFIG_CMD_PCI
- #define CONFIG_PCI
-@@ -208,6 +222,16 @@
- #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1)
- #endif
-
-+#define CONFIG_DM
-+#define CONFIG_DM_THERMAL
-+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
-+#define CONFIG_IMX6_THERMAL
-+
-+#define CONFIG_CMD_FUSE
-+#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
-+#define CONFIG_MXC_OCOTP
-+#endif
-+
- /* FLASH and environment organization */
- #define CONFIG_SYS_NO_FLASH
-
-diff -ruN u-boot-2015.01-rc3/include/configs/nyan-big.h u-boot/include/configs/nyan-big.h
---- u-boot-2015.01-rc3/include/configs/nyan-big.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/include/configs/nyan-big.h 2015-01-01 17:34:32.805494202 +0100
-@@ -0,0 +1,74 @@
-+/*
-+ * (C) Copyright 2014
-+ * NVIDIA Corporation <www.nvidia.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#include <linux/sizes.h>
-+
-+#include "tegra124-common.h"
-+
-+/* High-level configuration options */
-+#define V_PROMPT "Tegra124 (Nyan-big) # "
-+#define CONFIG_TEGRA_BOARD_STRING "Google/NVIDIA Nyan-big"
-+
-+/* Board-specific serial config */
-+#define CONFIG_SERIAL_MULTI
-+#define CONFIG_TEGRA_ENABLE_UARTA
-+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-+
-+#define CONFIG_BOARD_EARLY_INIT_F
-+
-+/* I2C */
-+#define CONFIG_SYS_I2C_TEGRA
-+#define CONFIG_CMD_I2C
-+
-+/* SD/MMC */
-+#define CONFIG_MMC
-+#define CONFIG_GENERIC_MMC
-+#define CONFIG_TEGRA_MMC
-+#define CONFIG_CMD_MMC
-+
-+/* Environment in eMMC, at the end of 2nd "boot sector" */
-+#define CONFIG_ENV_IS_IN_MMC
-+#define CONFIG_SYS_MMC_ENV_DEV 0
-+#define CONFIG_SYS_MMC_ENV_PART 2
-+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
-+
-+/* SPI */
-+#define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */
-+#define CONFIG_TEGRA114_SPI_CTRLS 6
-+#define CONFIG_SPI_FLASH
-+#define CONFIG_SPI_FLASH_WINBOND
-+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-+#define CONFIG_SF_DEFAULT_SPEED 24000000
-+#define CONFIG_CMD_SPI
-+#define CONFIG_CMD_SF
-+#define CONFIG_SPI_FLASH_SIZE (4 << 20)
-+
-+/* USB Host support */
-+#define CONFIG_USB_EHCI
-+#define CONFIG_USB_EHCI_TEGRA
-+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-+#define CONFIG_USB_STORAGE
-+#define CONFIG_CMD_USB
-+
-+/* USB networking support */
-+#define CONFIG_USB_HOST_ETHER
-+#define CONFIG_USB_ETHER_ASIX
-+
-+/* General networking support */
-+#define CONFIG_CMD_NET
-+#define CONFIG_CMD_DHCP
-+
-+#define CONFIG_FIT
-+#define CONFIG_OF_LIBFDT
-+
-+#include "tegra-common-usb-gadget.h"
-+#include "tegra-common-post.h"
-+
-+#endif /* __CONFIG_H */
-diff -ruN u-boot-2015.01-rc3/include/configs/P1023RDB.h u-boot/include/configs/P1023RDB.h
---- u-boot-2015.01-rc3/include/configs/P1023RDB.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/P1023RDB.h 2015-01-01 17:34:32.769494793 +0100
-@@ -347,9 +347,25 @@
- #define CONFIG_SYS_QMAN_MEM_BASE 0xff000000
- #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
- #define CONFIG_SYS_BMAN_MEM_BASE 0xff200000
- #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
-
- /* For FM */
- #define CONFIG_SYS_DPAA_FMAN
-diff -ruN u-boot-2015.01-rc3/include/configs/P2041RDB.h u-boot/include/configs/P2041RDB.h
---- u-boot-2015.01-rc3/include/configs/P2041RDB.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/P2041RDB.h 2015-01-01 17:34:32.769494793 +0100
-@@ -13,6 +13,8 @@
-
- #define CONFIG_P2041RDB
- #define CONFIG_PHYS_64BIT
-+#define CONFIG_SYS_GENERIC_BOARD
-+#define CONFIG_DISPLAY_BOARDINFO
- #define CONFIG_PPC_P2041
-
- #ifdef CONFIG_RAMBOOT_PBL
-@@ -489,6 +491,14 @@
- #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
- #endif
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
- #define CONFIG_SYS_QMAN_NUM_PORTALS 10
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
- #ifdef CONFIG_PHYS_64BIT
-@@ -497,6 +507,14 @@
- #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
- #endif
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
- #define CONFIG_SYS_DPAA_PME
-diff -ruN u-boot-2015.01-rc3/include/configs/rcar-gen2-common.h u-boot/include/configs/rcar-gen2-common.h
---- u-boot-2015.01-rc3/include/configs/rcar-gen2-common.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/rcar-gen2-common.h 2015-01-01 17:34:32.809494137 +0100
-@@ -28,6 +28,9 @@
- #define CONFIG_CMD_FAT
- #define CONFIG_CMD_SF
- #define CONFIG_CMD_SPI
-+#define CONFIG_CMD_EXT2
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_EXT4_WRITE
-
- #define CONFIG_SYS_THUMB_BUILD
- #define CONFIG_SYS_GENERIC_BOARD
-@@ -36,6 +39,7 @@
- #define CONFIG_FAT_WRITE
- #define CONFIG_DOS_PARTITION
- #define CONFIG_SUPPORT_VFAT
-+#define CONFIG_FS_EXT4
- #define CONFIG_EXT4_WRITE
-
- #define CONFIG_CMDLINE_TAG
-diff -ruN u-boot-2015.01-rc3/include/configs/rpi.h u-boot/include/configs/rpi.h
---- u-boot-2015.01-rc3/include/configs/rpi.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/rpi.h 2015-01-01 17:34:32.809494137 +0100
-@@ -34,6 +34,7 @@
- #define CONFIG_DM
- #define CONFIG_CMD_DM
- #define CONFIG_DM_GPIO
-+#define CONFIG_DM_SERIAL
-
- /* Memory layout */
- #define CONFIG_NR_DRAM_BANKS 1
-@@ -51,6 +52,7 @@
- CONFIG_SYS_SDRAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
- #define CONFIG_SYS_MALLOC_LEN SZ_4M
-+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
- #define CONFIG_SYS_MEMTEST_START 0x00100000
- #define CONFIG_SYS_MEMTEST_END 0x00200000
- #define CONFIG_LOADADDR 0x00200000
-@@ -92,9 +94,7 @@
- #endif
-
- /* Console UART */
--#define CONFIG_PL011_SERIAL
--#define CONFIG_PL011_CLOCK 3000000
--#define CONFIG_PL01x_PORTS { (void *)0x20201000 }
-+#define CONFIG_PL01X_SERIAL
- #define CONFIG_CONS_INDEX 0
- #define CONFIG_BAUDRATE 115200
-
-diff -ruN u-boot-2015.01-rc3/include/configs/sandbox.h u-boot/include/configs/sandbox.h
---- u-boot-2015.01-rc3/include/configs/sandbox.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/sandbox.h 2015-01-01 17:34:32.809494137 +0100
-@@ -112,6 +112,12 @@
- #define CONFIG_SPI_FLASH_STMICRO
- #define CONFIG_SPI_FLASH_WINBOND
-
-+#define CONFIG_DM_I2C
-+#define CONFIG_CMD_I2C
-+#define CONFIG_SYS_I2C_SANDBOX
-+#define CONFIG_I2C_EDID
-+#define CONFIG_I2C_EEPROM
-+
- /* Memory things - we don't really want a memory test */
- #define CONFIG_SYS_LOAD_ADDR 0x00000000
- #define CONFIG_SYS_MEMTEST_START 0x00100000
-diff -ruN u-boot-2015.01-rc3/include/configs/seaboard.h u-boot/include/configs/seaboard.h
---- u-boot-2015.01-rc3/include/configs/seaboard.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/seaboard.h 2015-01-01 17:34:32.813494071 +0100
-@@ -37,10 +37,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/configs/socfpga_common.h u-boot/include/configs/socfpga_common.h
---- u-boot-2015.01-rc3/include/configs/socfpga_common.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/socfpga_common.h 2015-01-01 17:34:32.813494071 +0100
-@@ -159,7 +159,7 @@
- #define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
- #endif
-
-- /*
-+/*
- * I2C support
- */
- #define CONFIG_SYS_I2C
-@@ -187,6 +187,37 @@
- #define CONFIG_CMD_I2C
-
- /*
-+ * QSPI support
-+ */
-+#ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */
-+#define CONFIG_CMD_DM
-+#define CONFIG_DM
-+#define CONFIG_DM_SPI
-+#define CONFIG_DM_SPI_FLASH
-+#define CONFIG_CADENCE_QSPI
-+/* Enable multiple SPI NOR flash manufacturers */
-+#define CONFIG_SPI_FLASH /* SPI flash subsystem */
-+#define CONFIG_SPI_FLASH_STMICRO /* Micron/Numonyx flash */
-+#define CONFIG_SPI_FLASH_SPANSION /* Spansion flash */
-+#define CONFIG_SPI_FLASH_MTD
-+/* QSPI reference clock */
-+#ifndef __ASSEMBLY__
-+unsigned int cm_get_qspi_controller_clk_hz(void);
-+#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz()
-+#endif
-+#define CONFIG_CQSPI_DECODER 0
-+#define CONFIG_CMD_SF
-+#endif
-+
-+#ifdef CONFIG_OF_CONTROL /* DW SPI is controlled via DT */
-+#define CONFIG_CMD_DM
-+#define CONFIG_DM
-+#define CONFIG_DM_SPI
-+#define CONFIG_DESIGNWARE_SPI
-+#define CONFIG_CMD_SPI
-+#endif
-+
-+/*
- * Serial Driver
- */
- #define CONFIG_SYS_NS16550
-diff -ruN u-boot-2015.01-rc3/include/configs/stv0991.h u-boot/include/configs/stv0991.h
---- u-boot-2015.01-rc3/include/configs/stv0991.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/include/configs/stv0991.h 2015-01-01 17:34:32.813494071 +0100
-@@ -0,0 +1,95 @@
-+/*
-+ * (C) Copyright 2014
-+ * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_STV0991_H
-+#define __CONFIG_STV0991_H
-+#define CONFIG_SYS_DCACHE_OFF
-+#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
-+#define CONFIG_BOARD_EARLY_INIT_F
-+
-+#define CONFIG_SYS_CORTEX_R4
-+
-+#define CONFIG_SYS_GENERIC_BOARD
-+#define CONFIG_SYS_NO_FLASH
-+
-+/* ram memory-related information */
-+#define CONFIG_NR_DRAM_BANKS 1
-+#define PHYS_SDRAM_1 0x00000000
-+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-+#define PHYS_SDRAM_1_SIZE 0x00198000
-+
-+#define CONFIG_ENV_SIZE 0x10000
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_ADDR \
-+ (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
-+#define CONFIG_SYS_MAXARGS 16
-+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
-+#define CONFIG_SYS_MALLOC_F_LEN 0x2000
-+
-+#define CONFIG_DM
-+/* serial port (PL011) configuration */
-+#define CONFIG_BAUDRATE 115200
-+#ifdef CONFIG_DM
-+#define CONFIG_DM_SERIAL
-+#define CONFIG_PL01X_SERIAL
-+#else
-+#define CONFIG_SYS_SERIAL0 0x80406000
-+#define CONFIG_CONS_INDEX 0
-+#define CONFIG_PL011_SERIAL
-+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0}
-+#define CONFIG_PL011_CLOCK (2700 * 1000)
-+#endif
-+
-+/* user interface */
-+#define CONFIG_SYS_PROMPT "STV0991> "
-+#define CONFIG_SYS_CBSIZE 1024
-+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
-+ +sizeof(CONFIG_SYS_PROMPT) + 16)
-+
-+/* MISC */
-+#define CONFIG_SYS_LOAD_ADDR 0x00000000
-+#define CONFIG_SYS_INIT_RAM_SIZE 0x8000
-+#define CONFIG_SYS_INIT_RAM_ADDR 0x00190000
-+#define CONFIG_SYS_INIT_SP_OFFSET \
-+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-+/* U-boot Load Address */
-+#define CONFIG_SYS_TEXT_BASE 0x00010000
-+#define CONFIG_SYS_INIT_SP_ADDR \
-+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-+
-+/* GMAC related configs */
-+
-+#define CONFIG_MII
-+#define CONFIG_PHYLIB
-+#define CONFIG_CMD_NET
-+#define CONFIG_DESIGNWARE_ETH
-+#define CONFIG_DW_ALTDESCRIPTOR
-+#define CONFIG_PHY_MICREL
-+
-+/* Command support defines */
-+#define CONFIG_CMD_PING
-+#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
-+
-+#include "config_cmd_default.h"
-+#undef CONFIG_CMD_SAVEENV
-+
-+#define CONFIG_SYS_MEMTEST_START 0x0000
-+#define CONFIG_SYS_MEMTEST_END 1024*1024
-+#define CONFIG_CMD_MEMTEST
-+
-+/* Misc configuration */
-+#define CONFIG_SYS_LONGHELP
-+#define CONFIG_CMDLINE_EDITING
-+
-+#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTCOMMAND "go 0x40040000"
-+#define CONFIG_AUTOBOOT_KEYED
-+#define CONFIG_AUTOBOOT_STOP_STR " "
-+#define CONFIG_AUTOBOOT_PROMPT \
-+ "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
-+
-+#endif /* __CONFIG_H */
-diff -ruN u-boot-2015.01-rc3/include/configs/sun7i.h u-boot/include/configs/sun7i.h
---- u-boot-2015.01-rc3/include/configs/sun7i.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/sun7i.h 2015-01-01 17:34:32.813494071 +0100
-@@ -25,6 +25,7 @@
- #define CONFIG_ARMV7_PSCI 1
- #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
- #define CONFIG_SYS_CLK_FREQ 24000000
-+#define CONFIG_TIMER_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
- /*
- * Include common sunxi configuration where most the settings are
-diff -ruN u-boot-2015.01-rc3/include/configs/T102xQDS.h u-boot/include/configs/T102xQDS.h
---- u-boot-2015.01-rc3/include/configs/T102xQDS.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/T102xQDS.h 2015-01-01 17:34:32.773494727 +0100
-@@ -720,7 +720,7 @@
- /* Qman/Bman */
- #ifndef CONFIG_NOBQFMAN
- #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
--#define CONFIG_SYS_BMAN_NUM_PORTALS 25
-+#define CONFIG_SYS_BMAN_NUM_PORTALS 10
- #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
- #ifdef CONFIG_PHYS_64BIT
- #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
-@@ -728,7 +728,15 @@
- #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
- #endif
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
--#define CONFIG_SYS_QMAN_NUM_PORTALS 25
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
-+#define CONFIG_SYS_QMAN_NUM_PORTALS 10
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
- #ifdef CONFIG_PHYS_64BIT
- #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
-@@ -736,6 +744,14 @@
- #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
- #endif
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
-
-diff -ruN u-boot-2015.01-rc3/include/configs/T102xRDB.h u-boot/include/configs/T102xRDB.h
---- u-boot-2015.01-rc3/include/configs/T102xRDB.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/T102xRDB.h 2015-01-01 17:34:32.773494727 +0100
-@@ -677,7 +677,7 @@
- /* Qman/Bman */
- #ifndef CONFIG_NOBQFMAN
- #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
--#define CONFIG_SYS_BMAN_NUM_PORTALS 25
-+#define CONFIG_SYS_BMAN_NUM_PORTALS 10
- #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
- #ifdef CONFIG_PHYS_64BIT
- #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
-@@ -685,7 +685,15 @@
- #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
- #endif
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
--#define CONFIG_SYS_QMAN_NUM_PORTALS 25
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
-+#define CONFIG_SYS_QMAN_NUM_PORTALS 10
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
- #ifdef CONFIG_PHYS_64BIT
- #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
-@@ -693,6 +701,14 @@
- #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
- #endif
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
-
-diff -ruN u-boot-2015.01-rc3/include/configs/T1040QDS.h u-boot/include/configs/T1040QDS.h
---- u-boot-2015.01-rc3/include/configs/T1040QDS.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/T1040QDS.h 2015-01-01 17:34:32.773494727 +0100
-@@ -605,14 +605,30 @@
- /* Qman/Bman */
- #ifndef CONFIG_NOBQFMAN
- #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
--#define CONFIG_SYS_BMAN_NUM_PORTALS 25
-+#define CONFIG_SYS_BMAN_NUM_PORTALS 10
- #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
- #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
--#define CONFIG_SYS_QMAN_NUM_PORTALS 25
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
-+#define CONFIG_SYS_QMAN_NUM_PORTALS 10
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
- #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
- #define CONFIG_SYS_DPAA_PME
-diff -ruN u-boot-2015.01-rc3/include/configs/T104xRDB.h u-boot/include/configs/T104xRDB.h
---- u-boot-2015.01-rc3/include/configs/T104xRDB.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/T104xRDB.h 2015-01-01 17:34:32.773494727 +0100
-@@ -104,7 +104,10 @@
-
- /* support deep sleep */
- #define CONFIG_DEEP_SLEEP
-+#if defined(CONFIG_DEEP_SLEEP)
-+#define CONFIG_BOARD_EARLY_INIT_F
- #define CONFIG_SILENT_CONSOLE
-+#endif
-
- #ifndef CONFIG_SYS_TEXT_BASE
- #define CONFIG_SYS_TEXT_BASE 0xeff40000
-@@ -636,14 +639,30 @@
- /* Qman/Bman */
- #ifndef CONFIG_NOBQFMAN
- #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
--#define CONFIG_SYS_BMAN_NUM_PORTALS 25
-+#define CONFIG_SYS_BMAN_NUM_PORTALS 10
- #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
- #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
--#define CONFIG_SYS_QMAN_NUM_PORTALS 25
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
-+#define CONFIG_SYS_QMAN_NUM_PORTALS 10
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
- #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
- #define CONFIG_SYS_DPAA_PME
-diff -ruN u-boot-2015.01-rc3/include/configs/T208xQDS.h u-boot/include/configs/T208xQDS.h
---- u-boot-2015.01-rc3/include/configs/T208xQDS.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/T208xQDS.h 2015-01-01 17:34:32.773494727 +0100
-@@ -634,10 +634,26 @@
- #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
- #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
- #define CONFIG_SYS_QMAN_NUM_PORTALS 18
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
- #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
- #define CONFIG_SYS_DPAA_PME
-diff -ruN u-boot-2015.01-rc3/include/configs/T208xRDB.h u-boot/include/configs/T208xRDB.h
---- u-boot-2015.01-rc3/include/configs/T208xRDB.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/T208xRDB.h 2015-01-01 17:34:32.773494727 +0100
-@@ -567,10 +567,26 @@
- #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
- #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
- #define CONFIG_SYS_QMAN_NUM_PORTALS 18
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
- #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
- #define CONFIG_SYS_DPAA_PME
-diff -ruN u-boot-2015.01-rc3/include/configs/T4240EMU.h u-boot/include/configs/T4240EMU.h
---- u-boot-2015.01-rc3/include/configs/T4240EMU.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/T4240EMU.h 2015-01-01 17:34:32.773494727 +0100
-@@ -85,10 +85,26 @@
- #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
- #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
- #define CONFIG_SYS_QMAN_NUM_PORTALS 50
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
- #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
- #define CONFIG_SYS_DPAA_PME
-diff -ruN u-boot-2015.01-rc3/include/configs/T4240QDS.h u-boot/include/configs/T4240QDS.h
---- u-boot-2015.01-rc3/include/configs/T4240QDS.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/T4240QDS.h 2015-01-01 17:34:32.773494727 +0100
-@@ -417,10 +417,26 @@
- #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
- #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
- #define CONFIG_SYS_QMAN_NUM_PORTALS 50
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
- #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
- #define CONFIG_SYS_DPAA_PME
-diff -ruN u-boot-2015.01-rc3/include/configs/T4240RDB.h u-boot/include/configs/T4240RDB.h
---- u-boot-2015.01-rc3/include/configs/T4240RDB.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/T4240RDB.h 2015-01-01 17:34:32.773494727 +0100
-@@ -12,6 +12,8 @@
-
- #define CONFIG_T4240RDB
- #define CONFIG_PHYS_64BIT
-+#define CONFIG_SYS_GENERIC_BOARD
-+#define CONFIG_DISPLAY_BOARDINFO
-
- #define CONFIG_FSL_SATA_V2
- #define CONFIG_PCIE4
-@@ -577,10 +579,26 @@
- #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
- #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
- #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
-+ CONFIG_SYS_BMAN_CENA_SIZE)
-+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
- #define CONFIG_SYS_QMAN_NUM_PORTALS 50
- #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
- #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
- #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
-+ CONFIG_SYS_QMAN_CENA_SIZE)
-+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
- #define CONFIG_SYS_DPAA_FMAN
- #define CONFIG_SYS_DPAA_PME
-diff -ruN u-boot-2015.01-rc3/include/configs/tbs2910.h u-boot/include/configs/tbs2910.h
---- u-boot-2015.01-rc3/include/configs/tbs2910.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/tbs2910.h 2015-01-01 17:34:32.817494006 +0100
-@@ -167,7 +167,7 @@
- #define CONFIG_USB_STORAGE
- #define CONFIG_USB_KEYBOARD
- #ifdef CONFIG_USB_KEYBOARD
--#define CONFIG_SYS_USB_EVENT_POLL
-+#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
- #define CONFIG_SYS_STDIO_DEREGISTER
- #define CONFIG_PREBOOT "if hdmidet; then usb start; fi"
- #endif /* CONFIG_USB_KEYBOARD */
-diff -ruN u-boot-2015.01-rc3/include/configs/tec-ng.h u-boot/include/configs/tec-ng.h
---- u-boot-2015.01-rc3/include/configs/tec-ng.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/tec-ng.h 2015-01-01 17:34:32.817494006 +0100
-@@ -23,12 +23,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_I2C_MULTI_BUS
--#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/configs/tegra114-common.h u-boot/include/configs/tegra114-common.h
---- u-boot-2015.01-rc3/include/configs/tegra114-common.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/tegra114-common.h 2015-01-01 17:34:32.817494006 +0100
-@@ -76,9 +76,6 @@
- #define CONFIG_SYS_SPL_MALLOC_START 0x80090000
- #define CONFIG_SPL_STACK 0x800ffffc
-
--/* Total I2C ports on Tegra114 */
--#define TEGRA_I2C_NUM_CONTROLLERS 5
--
- /* For USB EHCI controller */
- #define CONFIG_EHCI_IS_TDI
- #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
-diff -ruN u-boot-2015.01-rc3/include/configs/tegra124-common.h u-boot/include/configs/tegra124-common.h
---- u-boot-2015.01-rc3/include/configs/tegra124-common.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/tegra124-common.h 2015-01-01 17:34:32.817494006 +0100
-@@ -68,9 +68,6 @@
- #define CONFIG_SYS_SPL_MALLOC_START 0x80090000
- #define CONFIG_SPL_STACK 0x800ffffc
-
--/* Total I2C ports on Tegra124 */
--#define TEGRA_I2C_NUM_CONTROLLERS 5
--
- /* For USB EHCI controller */
- #define CONFIG_EHCI_IS_TDI
- #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
-diff -ruN u-boot-2015.01-rc3/include/configs/tegra20-common.h u-boot/include/configs/tegra20-common.h
---- u-boot-2015.01-rc3/include/configs/tegra20-common.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/tegra20-common.h 2015-01-01 17:34:32.817494006 +0100
-@@ -97,9 +97,6 @@
- #define CONFIG_EHCI_IS_TDI
- #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
-
--/* Total I2C ports on Tegra20 */
--#define TEGRA_I2C_NUM_CONTROLLERS 4
--
- #define CONFIG_SYS_NAND_SELF_INIT
- #define CONFIG_SYS_NAND_ONFI_DETECTION
-
-diff -ruN u-boot-2015.01-rc3/include/configs/tegra30-common.h u-boot/include/configs/tegra30-common.h
---- u-boot-2015.01-rc3/include/configs/tegra30-common.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/tegra30-common.h 2015-01-01 17:34:32.817494006 +0100
-@@ -73,9 +73,6 @@
- #define CONFIG_SYS_SPL_MALLOC_START 0x80090000
- #define CONFIG_SPL_STACK 0x800ffffc
-
--/* Total I2C ports on Tegra30 */
--#define TEGRA_I2C_NUM_CONTROLLERS 5
--
- /* For USB EHCI controller */
- #define CONFIG_EHCI_IS_TDI
- #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
-diff -ruN u-boot-2015.01-rc3/include/configs/tegra-common.h u-boot/include/configs/tegra-common.h
---- u-boot-2015.01-rc3/include/configs/tegra-common.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/tegra-common.h 2015-01-01 17:34:32.817494006 +0100
-@@ -26,6 +26,7 @@
- #endif
- #define CONFIG_DM_SPI
- #define CONFIG_DM_SPI_FLASH
-+#define CONFIG_DM_I2C
-
- #define CONFIG_SYS_TIMER_RATE 1000000
- #define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
-diff -ruN u-boot-2015.01-rc3/include/configs/trimslice.h u-boot/include/configs/trimslice.h
---- u-boot-2015.01-rc3/include/configs/trimslice.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/trimslice.h 2015-01-01 17:34:32.817494006 +0100
-@@ -34,10 +34,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/configs/uniphier.h u-boot/include/configs/uniphier.h
---- u-boot-2015.01-rc3/include/configs/uniphier.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/uniphier.h 2015-01-01 17:34:32.817494006 +0100
-@@ -187,6 +187,8 @@
- #define CONFIG_FAT_WRITE
- #define CONFIG_DOS_PARTITION
-
-+#define CONFIG_CMD_DM
-+
- /* memtest works on */
- #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
- #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
-@@ -273,7 +275,11 @@
- #define CONFIG_SYS_SPL_MALLOC_START (0x0ff00000)
- #define CONFIG_SYS_SPL_MALLOC_SIZE (0x00004000)
-
-+#ifdef CONFIG_SPL_BUILD
- #define CONFIG_SYS_INIT_SP_ADDR (0x0ff08000)
-+#else
-+#define CONFIG_SYS_INIT_SP_ADDR ((CONFIG_SYS_TEXT_BASE) - 0x00001000)
-+#endif
-
- #define CONFIG_SPL_FRAMEWORK
- #define CONFIG_SPL_NAND_SUPPORT
-diff -ruN u-boot-2015.01-rc3/include/configs/venice2.h u-boot/include/configs/venice2.h
---- u-boot-2015.01-rc3/include/configs/venice2.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/venice2.h 2015-01-01 17:34:32.821493940 +0100
-@@ -25,12 +25,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_I2C_MULTI_BUS
--#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/configs/vexpress_aemv8a.h u-boot/include/configs/vexpress_aemv8a.h
---- u-boot-2015.01-rc3/include/configs/vexpress_aemv8a.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/vexpress_aemv8a.h 2015-01-01 17:34:32.821493940 +0100
-@@ -8,6 +8,9 @@
- #ifndef __VEXPRESS_AEMV8A_H
- #define __VEXPRESS_AEMV8A_H
-
-+/* We use generic board for v8 Versatile Express */
-+#define CONFIG_SYS_GENERIC_BOARD
-+
- #ifdef CONFIG_BASE_FVP
- #ifndef CONFIG_SEMIHOSTING
- #error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING
-@@ -25,8 +28,6 @@
-
- /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
-
--/*#define CONFIG_SYS_GENERIC_BOARD*/
--
- #define CONFIG_SYS_NO_FLASH
-
- #define CONFIG_SUPPORT_RAW_INITRD
-diff -ruN u-boot-2015.01-rc3/include/configs/whistler.h u-boot/include/configs/whistler.h
---- u-boot-2015.01-rc3/include/configs/whistler.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/configs/whistler.h 2015-01-01 17:34:32.821493940 +0100
-@@ -26,10 +26,7 @@
-
- /* I2C */
- #define CONFIG_SYS_I2C_TEGRA
--#define CONFIG_SYS_I2C_INIT_BOARD
--#define CONFIG_SYS_I2C_SPEED 100000
- #define CONFIG_CMD_I2C
--#define CONFIG_SYS_I2C
-
- /* SD/MMC */
- #define CONFIG_MMC
-diff -ruN u-boot-2015.01-rc3/include/dfu.h u-boot/include/dfu.h
---- u-boot-2015.01-rc3/include/dfu.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/dfu.h 2015-01-01 17:34:32.825493874 +0100
-@@ -150,9 +150,6 @@
- char *dfu_extract_token(char** e, int *n);
- void dfu_trigger_reset(void);
- int dfu_get_alt(char *name);
--bool dfu_detach(void);
--void dfu_trigger_detach(void);
--void dfu_clear_detach(void);
- int dfu_init_env_entities(char *interface, char *devstr);
- unsigned char *dfu_get_buf(struct dfu_entity *dfu);
- unsigned char *dfu_free_buf(void);
-diff -ruN u-boot-2015.01-rc3/include/dm/uclass-id.h u-boot/include/dm/uclass-id.h
---- u-boot-2015.01-rc3/include/dm/uclass-id.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/dm/uclass-id.h 2015-01-01 17:34:32.825493874 +0100
-@@ -19,6 +19,7 @@
- UCLASS_TEST_FDT,
- UCLASS_TEST_BUS,
- UCLASS_SPI_EMUL, /* sandbox SPI device emulator */
-+ UCLASS_I2C_EMUL, /* sandbox I2C device emulator */
- UCLASS_SIMPLE_BUS,
-
- /* U-Boot uclasses start here */
-@@ -29,6 +30,9 @@
- UCLASS_SPI_FLASH, /* SPI flash */
- UCLASS_CROS_EC, /* Chrome OS EC */
- UCLASS_THERMAL, /* Thermal sensor */
-+ UCLASS_I2C, /* I2C bus */
-+ UCLASS_I2C_GENERIC, /* Generic I2C device */
-+ UCLASS_I2C_EEPROM, /* I2C EEPROM device */
-
- UCLASS_COUNT,
- UCLASS_INVALID = -1,
-diff -ruN u-boot-2015.01-rc3/include/dm/ut.h u-boot/include/dm/ut.h
---- u-boot-2015.01-rc3/include/dm/ut.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/dm/ut.h 2015-01-01 17:34:32.825493874 +0100
-@@ -89,6 +89,18 @@
- } \
- }
-
-+/* Assert that a pointer is not NULL */
-+#define ut_assertnonnull(expr) { \
-+ const void *val = (expr); \
-+ \
-+ if (val == NULL) { \
-+ ut_failf(dms, __FILE__, __LINE__, __func__, \
-+ #expr " = NULL", \
-+ "Expected non-null, got NULL"); \
-+ return -1; \
-+ } \
-+}
-+
- /* Assert that an operation succeeds (returns 0) */
- #define ut_assertok(cond) ut_asserteq(0, cond)
-
-diff -ruN u-boot-2015.01-rc3/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/include/dt-bindings/pinctrl/pinctrl-tegra.h
---- u-boot-2015.01-rc3/include/dt-bindings/pinctrl/pinctrl-tegra.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/include/dt-bindings/pinctrl/pinctrl-tegra.h 2015-01-01 17:34:32.825493874 +0100
-@@ -0,0 +1,45 @@
-+/*
-+ * This header provides constants for Tegra pinctrl bindings.
-+ *
-+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
-+ *
-+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms and conditions of the GNU General Public License,
-+ * version 2, as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ */
-+
-+#ifndef _DT_BINDINGS_PINCTRL_TEGRA_H
-+#define _DT_BINDINGS_PINCTRL_TEGRA_H
-+
-+/*
-+ * Enable/disable for diffeent dt properties. This is applicable for
-+ * properties nvidia,enable-input, nvidia,tristate, nvidia,open-drain,
-+ * nvidia,lock, nvidia,rcv-sel, nvidia,high-speed-mode, nvidia,schmitt.
-+ */
-+#define TEGRA_PIN_DISABLE 0
-+#define TEGRA_PIN_ENABLE 1
-+
-+#define TEGRA_PIN_PULL_NONE 0
-+#define TEGRA_PIN_PULL_DOWN 1
-+#define TEGRA_PIN_PULL_UP 2
-+
-+/* Low power mode driver */
-+#define TEGRA_PIN_LP_DRIVE_DIV_8 0
-+#define TEGRA_PIN_LP_DRIVE_DIV_4 1
-+#define TEGRA_PIN_LP_DRIVE_DIV_2 2
-+#define TEGRA_PIN_LP_DRIVE_DIV_1 3
-+
-+/* Rising/Falling slew rate */
-+#define TEGRA_PIN_SLEW_RATE_FASTEST 0
-+#define TEGRA_PIN_SLEW_RATE_FAST 1
-+#define TEGRA_PIN_SLEW_RATE_SLOW 2
-+#define TEGRA_PIN_SLEW_RATE_SLOWEST 3
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/include/dt-bindings/reset/altr,rst-mgr.h u-boot/include/dt-bindings/reset/altr,rst-mgr.h
---- u-boot-2015.01-rc3/include/dt-bindings/reset/altr,rst-mgr.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/dt-bindings/reset/altr,rst-mgr.h 2015-01-01 17:34:32.825493874 +0100
-@@ -1,14 +1,7 @@
- /*
- * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
- *
-- * This software is licensed under the terms of the GNU General Public
-- * License version 2, as published by the Free Software Foundation, and
-- * may be copied, distributed, and modified under those terms.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-+ * SPDX-License-Identifier: GPL-2.0
- */
-
- #ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_H
-diff -ruN u-boot-2015.01-rc3/include/errno.h u-boot/include/errno.h
---- u-boot-2015.01-rc3/include/errno.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/errno.h 2015-01-01 17:34:32.829493808 +0100
-@@ -6,4 +6,7 @@
-
- #define __set_errno(val) do { errno = val; } while (0)
-
-+#ifdef CONFIG_ERRNO_STR
-+const char *errno_str(int errno);
-+#endif
- #endif /* _ERRNO_H */
-diff -ruN u-boot-2015.01-rc3/include/fsl_ddr_sdram.h u-boot/include/fsl_ddr_sdram.h
---- u-boot-2015.01-rc3/include/fsl_ddr_sdram.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/fsl_ddr_sdram.h 2015-01-01 17:34:32.829493808 +0100
-@@ -114,6 +114,7 @@
- #define SDRAM_CFG_2T_EN 0x00008000
- #define SDRAM_CFG_BI 0x00000001
-
-+#define SDRAM_CFG2_FRC_SR 0x80000000
- #define SDRAM_CFG2_D_INIT 0x00000010
- #define SDRAM_CFG2_ODT_CFG_MASK 0x00600000
- #define SDRAM_CFG2_ODT_NEVER 0
-@@ -163,6 +164,7 @@
- #define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
- #define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
- #define DDR_CDR2_VREF_OVRD(x) (0x00008080 | ((((x) - 37) & 0x3F) << 8))
-+#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
-
- #if (defined(CONFIG_SYS_FSL_DDR_VER) && \
- (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
-@@ -202,6 +204,8 @@
- #define DDR_CDR_ODT_120ohm 0x6
- #endif
-
-+#define DDR_INIT_ADDR_EXT_UIA (1 << 31)
-+
- /* Record of register values computed */
- typedef struct fsl_ddr_cfg_regs_s {
- struct {
-@@ -414,9 +418,11 @@
- int board_need_mem_reset(void)
- __attribute__((weak, alias("__board_need_mem_reset")));
-
--void __weak board_mem_sleep_setup(void)
--{
--}
-+#if defined(CONFIG_DEEP_SLEEP)
-+void board_mem_sleep_setup(void);
-+bool is_warm_boot(void);
-+int fsl_dp_resume(void);
-+#endif
-
- /*
- * The 85xx boards have a common prototype for fixed_sdram so put the
-diff -ruN u-boot-2015.01-rc3/include/fsl_usb.h u-boot/include/fsl_usb.h
---- u-boot-2015.01-rc3/include/fsl_usb.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/fsl_usb.h 2015-01-01 17:34:32.829493808 +0100
-@@ -145,6 +145,25 @@
- return SVR_SOC_VER(get_svr()) == SVR_T4240 &&
- IS_SVR_REV(get_svr(), 2, 0);
- }
-+
-+static inline bool has_erratum_a007792(void)
-+{
-+ u32 svr = get_svr();
-+ u32 soc = SVR_SOC_VER(svr);
-+
-+ switch (soc) {
-+ case SVR_T4240:
-+ case SVR_T4160:
-+ return IS_SVR_REV(svr, 2, 0);
-+ case SVR_T1040:
-+ return IS_SVR_REV(svr, 1, 0);
-+ case SVR_T2080:
-+ case SVR_T2081:
-+ return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1);
-+ }
-+ return false;
-+}
-+
- #else
- static inline bool has_erratum_a006261(void)
- {
-@@ -161,5 +180,9 @@
- return false;
- }
-
-+static inline bool has_erratum_a007792(void)
-+{
-+ return false;
-+}
- #endif
- #endif /*_ASM_FSL_USB_H_ */
-diff -ruN u-boot-2015.01-rc3/include/g_dnl.h u-boot/include/g_dnl.h
---- u-boot-2015.01-rc3/include/g_dnl.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/g_dnl.h 2015-01-01 17:34:32.829493808 +0100
-@@ -39,4 +39,8 @@
- void g_dnl_unregister(void);
- void g_dnl_set_serialnumber(char *);
-
-+bool g_dnl_detach(void);
-+void g_dnl_trigger_detach(void);
-+void g_dnl_clear_detach(void);
-+
- #endif /* __G_DOWNLOAD_H_ */
-diff -ruN u-boot-2015.01-rc3/include/i2c_eeprom.h u-boot/include/i2c_eeprom.h
---- u-boot-2015.01-rc3/include/i2c_eeprom.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/include/i2c_eeprom.h 2015-01-01 17:34:32.833493744 +0100
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright (c) 2014 Google, Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __I2C_EEPROM
-+#define __I2C_EEPROM
-+
-+struct i2c_eeprom_ops {
-+ int (*read)(struct udevice *dev, int offset, uint8_t *buf, int size);
-+ int (*write)(struct udevice *dev, int offset, const uint8_t *buf,
-+ int size);
-+};
-+
-+struct i2c_eeprom {
-+};
-+
-+#endif
-diff -ruN u-boot-2015.01-rc3/include/i2c.h u-boot/include/i2c.h
---- u-boot-2015.01-rc3/include/i2c.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/i2c.h 2015-01-01 17:34:32.833493744 +0100
-@@ -18,6 +18,355 @@
- #define _I2C_H_
-
- /*
-+ * For now there are essentially two parts to this file - driver model
-+ * here at the top, and the older code below (with CONFIG_SYS_I2C being
-+ * most recent). The plan is to migrate everything to driver model.
-+ * The driver model structures and API are separate as they are different
-+ * enough as to be incompatible for compilation purposes.
-+ */
-+
-+#ifdef CONFIG_DM_I2C
-+
-+enum dm_i2c_chip_flags {
-+ DM_I2C_CHIP_10BIT = 1 << 0, /* Use 10-bit addressing */
-+ DM_I2C_CHIP_RD_ADDRESS = 1 << 1, /* Send address for each read byte */
-+ DM_I2C_CHIP_WR_ADDRESS = 1 << 2, /* Send address for each write byte */
-+};
-+
-+/**
-+ * struct dm_i2c_chip - information about an i2c chip
-+ *
-+ * An I2C chip is a device on the I2C bus. It sits at a particular address
-+ * and normally supports 7-bit or 10-bit addressing.
-+ *
-+ * To obtain this structure, use dev_get_parentdata(dev) where dev is the
-+ * chip to examine.
-+ *
-+ * @chip_addr: Chip address on bus
-+ * @offset_len: Length of offset in bytes. A single byte offset can
-+ * represent up to 256 bytes. A value larger than 1 may be
-+ * needed for larger devices.
-+ * @flags: Flags for this chip (dm_i2c_chip_flags)
-+ * @emul: Emulator for this chip address (only used for emulation)
-+ */
-+struct dm_i2c_chip {
-+ uint chip_addr;
-+ uint offset_len;
-+ uint flags;
-+#ifdef CONFIG_SANDBOX
-+ struct udevice *emul;
-+#endif
-+};
-+
-+/**
-+ * struct dm_i2c_bus- information about an i2c bus
-+ *
-+ * An I2C bus contains 0 or more chips on it, each at its own address. The
-+ * bus can operate at different speeds (measured in Hz, typically 100KHz
-+ * or 400KHz).
-+ *
-+ * To obtain this structure, use bus->uclass_priv where bus is the I2C
-+ * bus udevice.
-+ *
-+ * @speed_hz: Bus speed in hertz (typically 100000)
-+ */
-+struct dm_i2c_bus {
-+ int speed_hz;
-+};
-+
-+/**
-+ * i2c_read() - read bytes from an I2C chip
-+ *
-+ * To obtain an I2C device (called a 'chip') given the I2C bus address you
-+ * can use i2c_get_chip(). To obtain a bus by bus number use
-+ * uclass_get_device_by_seq(UCLASS_I2C, <bus number>).
-+ *
-+ * To set the address length of a devce use i2c_set_addr_len(). It
-+ * defaults to 1.
-+ *
-+ * @dev: Chip to read from
-+ * @offset: Offset within chip to start reading
-+ * @buffer: Place to put data
-+ * @len: Number of bytes to read
-+ *
-+ * @return 0 on success, -ve on failure
-+ */
-+int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer,
-+ int len);
-+
-+/**
-+ * i2c_write() - write bytes to an I2C chip
-+ *
-+ * See notes for i2c_read() above.
-+ *
-+ * @dev: Chip to write to
-+ * @offset: Offset within chip to start writing
-+ * @buffer: Buffer containing data to write
-+ * @len: Number of bytes to write
-+ *
-+ * @return 0 on success, -ve on failure
-+ */
-+int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer,
-+ int len);
-+
-+/**
-+ * i2c_probe() - probe a particular chip address
-+ *
-+ * This can be useful to check for the existence of a chip on the bus.
-+ * It is typically implemented by writing the chip address to the bus
-+ * and checking that the chip replies with an ACK.
-+ *
-+ * @bus: Bus to probe
-+ * @chip_addr: 7-bit address to probe (10-bit and others are not supported)
-+ * @chip_flags: Flags for the probe (see enum dm_i2c_chip_flags)
-+ * @devp: Returns the device found, or NULL if none
-+ * @return 0 if a chip was found at that address, -ve if not
-+ */
-+int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
-+ struct udevice **devp);
-+
-+/**
-+ * i2c_set_bus_speed() - set the speed of a bus
-+ *
-+ * @bus: Bus to adjust
-+ * @speed: Requested speed in Hz
-+ * @return 0 if OK, -EINVAL for invalid values
-+ */
-+int i2c_set_bus_speed(struct udevice *bus, unsigned int speed);
-+
-+/**
-+ * i2c_get_bus_speed() - get the speed of a bus
-+ *
-+ * @bus: Bus to check
-+ * @return speed of selected I2C bus in Hz, -ve on error
-+ */
-+int i2c_get_bus_speed(struct udevice *bus);
-+
-+/**
-+ * i2c_set_chip_flags() - set flags for a chip
-+ *
-+ * Typically addresses are 7 bits, but for 10-bit addresses you should set
-+ * flags to DM_I2C_CHIP_10BIT. All accesses will then use 10-bit addressing.
-+ *
-+ * @dev: Chip to adjust
-+ * @flags: New flags
-+ * @return 0 if OK, -EINVAL if value is unsupported, other -ve value on error
-+ */
-+int i2c_set_chip_flags(struct udevice *dev, uint flags);
-+
-+/**
-+ * i2c_get_chip_flags() - get flags for a chip
-+ *
-+ * @dev: Chip to check
-+ * @flagsp: Place to put flags
-+ * @return 0 if OK, other -ve value on error
-+ */
-+int i2c_get_chip_flags(struct udevice *dev, uint *flagsp);
-+
-+/**
-+ * i2c_set_offset_len() - set the offset length for a chip
-+ *
-+ * The offset used to access a chip may be up to 4 bytes long. Typically it
-+ * is only 1 byte, which is enough for chips with 256 bytes of memory or
-+ * registers. The default value is 1, but you can call this function to
-+ * change it.
-+ *
-+ * @offset_len: New offset length value (typically 1 or 2)
-+ */
-+
-+int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len);
-+/**
-+ * i2c_deblock() - recover a bus that is in an unknown state
-+ *
-+ * See the deblock() method in 'struct dm_i2c_ops' for full information
-+ *
-+ * @bus: Bus to recover
-+ * @return 0 if OK, -ve on error
-+ */
-+int i2c_deblock(struct udevice *bus);
-+
-+/*
-+ * Not all of these flags are implemented in the U-Boot API
-+ */
-+enum dm_i2c_msg_flags {
-+ I2C_M_TEN = 0x0010, /* ten-bit chip address */
-+ I2C_M_RD = 0x0001, /* read data, from slave to master */
-+ I2C_M_STOP = 0x8000, /* send stop after this message */
-+ I2C_M_NOSTART = 0x4000, /* no start before this message */
-+ I2C_M_REV_DIR_ADDR = 0x2000, /* invert polarity of R/W bit */
-+ I2C_M_IGNORE_NAK = 0x1000, /* continue after NAK */
-+ I2C_M_NO_RD_ACK = 0x0800, /* skip the Ack bit on reads */
-+ I2C_M_RECV_LEN = 0x0400, /* length is first received byte */
-+};
-+
-+/**
-+ * struct i2c_msg - an I2C message
-+ *
-+ * @addr: Slave address
-+ * @flags: Flags (see enum dm_i2c_msg_flags)
-+ * @len: Length of buffer in bytes, may be 0 for a probe
-+ * @buf: Buffer to send/receive, or NULL if no data
-+ */
-+struct i2c_msg {
-+ uint addr;
-+ uint flags;
-+ uint len;
-+ u8 *buf;
-+};
-+
-+/**
-+ * struct i2c_msg_list - a list of I2C messages
-+ *
-+ * This is called i2c_rdwr_ioctl_data in Linux but the name does not seem
-+ * appropriate in U-Boot.
-+ *
-+ * @msg: Pointer to i2c_msg array
-+ * @nmsgs: Number of elements in the array
-+ */
-+struct i2c_msg_list {
-+ struct i2c_msg *msgs;
-+ uint nmsgs;
-+};
-+
-+/**
-+ * struct dm_i2c_ops - driver operations for I2C uclass
-+ *
-+ * Drivers should support these operations unless otherwise noted. These
-+ * operations are intended to be used by uclass code, not directly from
-+ * other code.
-+ */
-+struct dm_i2c_ops {
-+ /**
-+ * xfer() - transfer a list of I2C messages
-+ *
-+ * @bus: Bus to read from
-+ * @msg: List of messages to transfer
-+ * @nmsgs: Number of messages in the list
-+ * @return 0 if OK, -EREMOTEIO if the slave did not ACK a byte,
-+ * -ECOMM if the speed cannot be supported, -EPROTO if the chip
-+ * flags cannot be supported, other -ve value on some other error
-+ */
-+ int (*xfer)(struct udevice *bus, struct i2c_msg *msg, int nmsgs);
-+
-+ /**
-+ * probe_chip() - probe for the presense of a chip address
-+ *
-+ * This function is optional. If omitted, the uclass will send a zero
-+ * length message instead.
-+ *
-+ * @bus: Bus to probe
-+ * @chip_addr: Chip address to probe
-+ * @chip_flags: Probe flags (enum dm_i2c_chip_flags)
-+ * @return 0 if chip was found, -EREMOTEIO if not, -ENOSYS to fall back
-+ * to default probem other -ve value on error
-+ */
-+ int (*probe_chip)(struct udevice *bus, uint chip_addr, uint chip_flags);
-+
-+ /**
-+ * set_bus_speed() - set the speed of a bus (optional)
-+ *
-+ * The bus speed value will be updated by the uclass if this function
-+ * does not return an error. This method is optional - if it is not
-+ * provided then the driver can read the speed from
-+ * bus->uclass_priv->speed_hz
-+ *
-+ * @bus: Bus to adjust
-+ * @speed: Requested speed in Hz
-+ * @return 0 if OK, -EINVAL for invalid values
-+ */
-+ int (*set_bus_speed)(struct udevice *bus, unsigned int speed);
-+
-+ /**
-+ * get_bus_speed() - get the speed of a bus (optional)
-+ *
-+ * Normally this can be provided by the uclass, but if you want your
-+ * driver to check the bus speed by looking at the hardware, you can
-+ * implement that here. This method is optional. This method would
-+ * normally be expected to return bus->uclass_priv->speed_hz.
-+ *
-+ * @bus: Bus to check
-+ * @return speed of selected I2C bus in Hz, -ve on error
-+ */
-+ int (*get_bus_speed)(struct udevice *bus);
-+
-+ /**
-+ * set_flags() - set the flags for a chip (optional)
-+ *
-+ * This is generally implemented by the uclass, but drivers can
-+ * check the value to ensure that unsupported options are not used.
-+ * This method is optional. If provided, this method will always be
-+ * called when the flags change.
-+ *
-+ * @dev: Chip to adjust
-+ * @flags: New flags value
-+ * @return 0 if OK, -EINVAL if value is unsupported
-+ */
-+ int (*set_flags)(struct udevice *dev, uint flags);
-+
-+ /**
-+ * deblock() - recover a bus that is in an unknown state
-+ *
-+ * I2C is a synchronous protocol and resets of the processor in the
-+ * middle of an access can block the I2C Bus until a powerdown of
-+ * the full unit is done. This is because slaves can be stuck
-+ * waiting for addition bus transitions for a transaction that will
-+ * never complete. Resetting the I2C master does not help. The only
-+ * way is to force the bus through a series of transitions to make
-+ * sure that all slaves are done with the transaction. This method
-+ * performs this 'deblocking' if support by the driver.
-+ *
-+ * This method is optional.
-+ */
-+ int (*deblock)(struct udevice *bus);
-+};
-+
-+#define i2c_get_ops(dev) ((struct dm_i2c_ops *)(dev)->driver->ops)
-+
-+/**
-+ * i2c_get_chip() - get a device to use to access a chip on a bus
-+ *
-+ * This returns the device for the given chip address. The device can then
-+ * be used with calls to i2c_read(), i2c_write(), i2c_probe(), etc.
-+ *
-+ * @bus: Bus to examine
-+ * @chip_addr: Chip address for the new device
-+ * @devp: Returns pointer to new device if found or -ENODEV if not
-+ * found
-+ */
-+int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp);
-+
-+/**
-+ * i2c_get_chip() - get a device to use to access a chip on a bus number
-+ *
-+ * This returns the device for the given chip address on a particular bus
-+ * number.
-+ *
-+ * @busnum: Bus number to examine
-+ * @chip_addr: Chip address for the new device
-+ * @devp: Returns pointer to new device if found or -ENODEV if not
-+ * found
-+ */
-+int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp);
-+
-+/**
-+ * i2c_chip_ofdata_to_platdata() - Decode standard I2C platform data
-+ *
-+ * This decodes the chip address from a device tree node and puts it into
-+ * its dm_i2c_chip structure. This should be called in your driver's
-+ * ofdata_to_platdata() method.
-+ *
-+ * @blob: Device tree blob
-+ * @node: Node offset to read from
-+ * @spi: Place to put the decoded information
-+ */
-+int i2c_chip_ofdata_to_platdata(const void *blob, int node,
-+ struct dm_i2c_chip *chip);
-+
-+#endif
-+
-+#ifndef CONFIG_DM_I2C
-+
-+/*
- * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
- *
- * The implementation MUST NOT use static or global variables if the
-@@ -451,4 +800,7 @@
- * @return 0 if port was reset, -1 if not found
- */
- int i2c_reset_port_fdt(const void *blob, int node);
-+
-+#endif /* !CONFIG_DM_I2C */
-+
- #endif /* _I2C_H_ */
-diff -ruN u-boot-2015.01-rc3/include/linux/linkage.h u-boot/include/linux/linkage.h
---- u-boot-2015.01-rc3/include/linux/linkage.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/linux/linkage.h 2015-01-01 17:34:32.837493678 +0100
-@@ -17,7 +17,9 @@
- #define CPP_ASMLINKAGE
- #endif
-
-+#ifndef asmlinkage
- #define asmlinkage CPP_ASMLINKAGE
-+#endif
-
- #define SYMBOL_NAME_STR(X) #X
- #define SYMBOL_NAME(X) X
-diff -ruN u-boot-2015.01-rc3/include/linux/string.h u-boot/include/linux/string.h
---- u-boot-2015.01-rc3/include/linux/string.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/linux/string.h 2015-01-01 17:34:32.837493678 +0100
-@@ -30,6 +30,9 @@
- #ifndef __HAVE_ARCH_STRNCPY
- extern char * strncpy(char *,const char *, __kernel_size_t);
- #endif
-+#ifndef __HAVE_ARCH_STRLCPY
-+size_t strlcpy(char *, const char *, size_t);
-+#endif
- #ifndef __HAVE_ARCH_STRCAT
- extern char * strcat(char *, const char *);
- #endif
-diff -ruN u-boot-2015.01-rc3/include/mmc.h u-boot/include/mmc.h
---- u-boot-2015.01-rc3/include/mmc.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/mmc.h 2015-01-01 17:34:32.841493612 +0100
-@@ -31,6 +31,7 @@
- #define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403)
- #define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429)
- #define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405)
-+#define MMC_VERSION_5_0 (MMC_VERSION_MMC | 0x500)
-
- #define MMC_MODE_HS (1 << 0)
- #define MMC_MODE_HS_52MHz (1 << 1)
-@@ -147,6 +148,7 @@
- * EXT_CSD fields
- */
- #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
-+#define EXT_CSD_PARTITION_SETTING 155 /* R/W */
- #define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */
- #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
- #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
-@@ -197,6 +199,8 @@
- #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2)
- #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)
-
-+#define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0)
-+
- #define R1_ILLEGAL_COMMAND (1 << 22)
- #define R1_APP_CMD (1 << 5)
-
-@@ -314,6 +318,7 @@
- char init_in_progress; /* 1 if we have done mmc_start_init() */
- char preinit; /* start init as early as possible */
- uint op_cond_response; /* the response byte from the last op_cond */
-+ int ddr_mode;
- };
-
- int mmc_register(struct mmc *mmc);
-diff -ruN u-boot-2015.01-rc3/include/part.h u-boot/include/part.h
---- u-boot-2015.01-rc3/include/part.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/part.h 2015-01-01 17:34:32.845493546 +0100
-@@ -244,6 +244,26 @@
- */
- int gpt_restore(block_dev_desc_t *dev_desc, char *str_disk_guid,
- disk_partition_t *partitions, const int parts_count);
-+
-+/**
-+ * is_valid_gpt_buf() - Ensure that the Primary GPT information is valid
-+ *
-+ * @param dev_desc - block device descriptor
-+ * @param buf - buffer which contains the MBR and Primary GPT info
-+ *
-+ * @return - '0' on success, otherwise error
-+ */
-+int is_valid_gpt_buf(block_dev_desc_t *dev_desc, void *buf);
-+
-+/**
-+ * write_mbr_and_gpt_partitions() - write MBR, Primary GPT and Backup GPT
-+ *
-+ * @param dev_desc - block device descriptor
-+ * @param buf - buffer which contains the MBR and Primary GPT info
-+ *
-+ * @return - '0' on success, otherwise error
-+ */
-+int write_mbr_and_gpt_partitions(block_dev_desc_t *dev_desc, void *buf);
- #endif
-
- #endif /* _PART_H */
-diff -ruN u-boot-2015.01-rc3/include/pci_ids.h u-boot/include/pci_ids.h
---- u-boot-2015.01-rc3/include/pci_ids.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/pci_ids.h 2015-01-01 17:34:32.845493546 +0100
-@@ -2998,6 +2998,14 @@
- #define PCI_DEVICE_ID_INTEL_82454NX 0x84cb
- #define PCI_DEVICE_ID_INTEL_84460GX 0x84ea
- #define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500
-+#define PCI_DEVICE_ID_INTEL_TCF_GBE 0x8802
-+#define PCI_DEVICE_ID_INTEL_TCF_SDIO_0 0x8809
-+#define PCI_DEVICE_ID_INTEL_TCF_SDIO_1 0x880a
-+#define PCI_DEVICE_ID_INTEL_TCF_SATA 0x880b
-+#define PCI_DEVICE_ID_INTEL_TCF_UART_0 0x8811
-+#define PCI_DEVICE_ID_INTEL_TCF_UART_1 0x8812
-+#define PCI_DEVICE_ID_INTEL_TCF_UART_2 0x8813
-+#define PCI_DEVICE_ID_INTEL_TCF_UART_3 0x8814
- #define PCI_DEVICE_ID_INTEL_IXP2800 0x9004
- #define PCI_DEVICE_ID_INTEL_S21152BB 0xb152
-
-diff -ruN u-boot-2015.01-rc3/include/smsc_lpc47m.h u-boot/include/smsc_lpc47m.h
---- u-boot-2015.01-rc3/include/smsc_lpc47m.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/include/smsc_lpc47m.h 2015-01-01 17:34:32.849493480 +0100
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _SMSC_LPC47M_H_
-+#define _SMSC_LPC47M_H_
-+
-+/**
-+ * Configure the base I/O port of the specified serial device and enable the
-+ * serial device.
-+ *
-+ * @dev: High 8 bits = Super I/O port, low 8 bits = logical device number.
-+ * @iobase: Processor I/O port address to assign to this serial device.
-+ */
-+void lpc47m_enable_serial(u16 dev, u16 iobase);
-+
-+#endif /* _SMSC_LPC47M_H_ */
-diff -ruN u-boot-2015.01-rc3/include/spi.h u-boot/include/spi.h
---- u-boot-2015.01-rc3/include/spi.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/spi.h 2015-01-01 17:34:32.849493480 +0100
-@@ -34,6 +34,7 @@
-
- /* SPI TX operation modes */
- #define SPI_OPM_TX_QPP (1 << 0)
-+#define SPI_OPM_TX_BP (1 << 1)
-
- /* SPI RX operation modes */
- #define SPI_OPM_RX_AS (1 << 0)
-diff -ruN u-boot-2015.01-rc3/include/tps6586x.h u-boot/include/tps6586x.h
---- u-boot-2015.01-rc3/include/tps6586x.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/tps6586x.h 2015-01-01 17:34:32.849493480 +0100
-@@ -44,9 +44,9 @@
- * Set up the TPS6586X I2C bus number. This will be used for all operations
- * on the device. This function must be called before using other functions.
- *
-- * @param bus I2C bus number containing the TPS6586X chip
-+ * @param bus I2C bus containing the TPS6586X chip
- * @return 0 (always succeeds)
- */
--int tps6586x_init(int bus);
-+int tps6586x_init(struct udevice *bus);
-
- #endif /* _TPS6586X_H_ */
-diff -ruN u-boot-2015.01-rc3/include/usb/ehci-fsl.h u-boot/include/usb/ehci-fsl.h
---- u-boot-2015.01-rc3/include/usb/ehci-fsl.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/include/usb/ehci-fsl.h 2015-01-01 17:34:32.853493416 +0100
-@@ -280,7 +280,9 @@
- #define MXC_EHCI_IPPUE_DOWN (1 << 10)
- #define MXC_EHCI_IPPUE_UP (1 << 11)
-
-+int usb_phy_mode(int port);
- /* Board-specific initialization */
- int board_ehci_hcd_init(int port);
-+int board_usb_phy_mode(int port);
-
- #endif /* _EHCI_FSL_H */
-diff -ruN u-boot-2015.01-rc3/lib/asm-offsets.c u-boot/lib/asm-offsets.c
---- u-boot-2015.01-rc3/lib/asm-offsets.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/lib/asm-offsets.c 2015-01-01 17:34:32.857493350 +0100
-@@ -31,9 +31,6 @@
- #ifdef CONFIG_SYS_MALLOC_F_LEN
- DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base));
- #endif
--#ifdef CONFIG_X86
-- DEFINE(GD_BIST, offsetof(struct global_data, arch.bist));
--#endif
-
- #if defined(CONFIG_ARM)
-
-diff -ruN u-boot-2015.01-rc3/lib/errno_str.c u-boot/lib/errno_str.c
---- u-boot-2015.01-rc3/lib/errno_str.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/lib/errno_str.c 2015-01-01 17:34:32.857493350 +0100
-@@ -0,0 +1,147 @@
-+/*
-+ * Copyright (C) 2014 Samsung Electronics
-+ * Przemyslaw Marczak <p.marczak@samsung.com>
-+ *
-+ * SDPX-License-Identifier: GPL-2.0+
-+ */
-+#include <common.h>
-+#include <errno.h>
-+
-+#define ERRNO_MSG(errno, msg) msg
-+#define SAME_AS(x) (const char *)&errno_message[x]
-+
-+static const char * const errno_message[] = {
-+ ERRNO_MSG(0, "Success"),
-+ ERRNO_MSG(EPERM, "Operation not permitted"),
-+ ERRNO_MSG(ENOEN, "No such file or directory"),
-+ ERRNO_MSG(ESRCH, "No such process"),
-+ ERRNO_MSG(EINTR, "Interrupted system call"),
-+ ERRNO_MSG(EIO, "I/O error"),
-+ ERRNO_MSG(ENXIO, "No such device or address"),
-+ ERRNO_MSG(E2BIG, "Argument list too long"),
-+ ERRNO_MSG(ENOEXEC, "Exec format error"),
-+ ERRNO_MSG(EBADF, "Bad file number"),
-+ ERRNO_MSG(ECHILD, "No child processes"),
-+ ERRNO_MSG(EAGAIN, "Try again"),
-+ ERRNO_MSG(ENOMEM, "Out of memory"),
-+ ERRNO_MSG(EACCES, "Permission denied"),
-+ ERRNO_MSG(EFAULT, "Bad address"),
-+ ERRNO_MSG(ENOTBL, "Block device required"),
-+ ERRNO_MSG(EBUSY, "Device or resource busy"),
-+ ERRNO_MSG(EEXIST, "File exists"),
-+ ERRNO_MSG(EXDEV, "Cross-device link"),
-+ ERRNO_MSG(ENODEV, "No such device"),
-+ ERRNO_MSG(ENOTDIR, "Not a directory"),
-+ ERRNO_MSG(EISDIR, "Is a directory"),
-+ ERRNO_MSG(EINVAL, "Invalid argument"),
-+ ERRNO_MSG(ENFILE, "File table overflow"),
-+ ERRNO_MSG(EMFILE, "Too many open files"),
-+ ERRNO_MSG(ENOTTY, "Not a typewriter"),
-+ ERRNO_MSG(ETXTBSY, "Text file busy"),
-+ ERRNO_MSG(EFBIG, "File too large"),
-+ ERRNO_MSG(ENOSPC, "No space left on device"),
-+ ERRNO_MSG(ESPIPE, "Illegal seek"),
-+ ERRNO_MSG(EROFS, "Read-only file system"),
-+ ERRNO_MSG(EMLINK, "Too many links"),
-+ ERRNO_MSG(EPIPE, "Broken pipe"),
-+ ERRNO_MSG(EDOM, "Math argument out of domain of func"),
-+ ERRNO_MSG(ERANGE, "Math result not representable"),
-+ ERRNO_MSG(EDEADLK, "Resource deadlock would occur"),
-+ ERRNO_MSG(ENAMETOOLONG, "File name too long"),
-+ ERRNO_MSG(ENOLCK, "No record locks available"),
-+ ERRNO_MSG(ENOSYS, "Function not implemented"),
-+ ERRNO_MSG(ENOTEMPTY, "Directory not empty"),
-+ ERRNO_MSG(ELOOP, "Too many symbolic links encountered"),
-+ ERRNO_MSG(EWOULDBLOCK, SAME_AS(EAGAIN)),
-+ ERRNO_MSG(ENOMSG, "No message of desired type"),
-+ ERRNO_MSG(EIDRM, "Identifier removed"),
-+ ERRNO_MSG(ECHRNG, "Channel number out of range"),
-+ ERRNO_MSG(EL2NSYNC, "Level 2 not synchronized"),
-+ ERRNO_MSG(EL3HLT, "Level 3 halted"),
-+ ERRNO_MSG(EL3RST, "Level 3 reset"),
-+ ERRNO_MSG(ELNRNG, "Link number out of range"),
-+ ERRNO_MSG(EUNATCH, "Protocol driver not attached"),
-+ ERRNO_MSG(ENOCSI, "No CSI structure available"),
-+ ERRNO_MSG(EL2HLT, "Level 2 halted"),
-+ ERRNO_MSG(EBADE, "Invalid exchange"),
-+ ERRNO_MSG(EBADR, "Invalid request descriptor"),
-+ ERRNO_MSG(EXFULL, "Exchange full"),
-+ ERRNO_MSG(ENOANO, "No anode"),
-+ ERRNO_MSG(EBADRQC, "Invalid request code"),
-+ ERRNO_MSG(EBADSLT, "Invalid slot"),
-+ ERRNO_MSG(EDEADLOCK, SAME_AS(EDEADLK)),
-+ ERRNO_MSG(EBFONT, "Bad font file format"),
-+ ERRNO_MSG(ENOSTR, "Device not a stream"),
-+ ERRNO_MSG(ENODATA, "No data available"),
-+ ERRNO_MSG(ETIME, "Timer expired"),
-+ ERRNO_MSG(ENOSR, "Out of streams resources"),
-+ ERRNO_MSG(ENONET, "Machine is not on the network"),
-+ ERRNO_MSG(ENOPKG, "Package not installed"),
-+ ERRNO_MSG(EREMOTE, "Object is remote"),
-+ ERRNO_MSG(ENOLINK, "Link has been severed"),
-+ ERRNO_MSG(EADV, "Advertise error"),
-+ ERRNO_MSG(ESRMNT, "Srmount error"),
-+ ERRNO_MSG(ECOMM, "Communication error on send"),
-+ ERRNO_MSG(EPROTO, "Protocol error"),
-+ ERRNO_MSG(EMULTIHOP, "Multihop attempted"),
-+ ERRNO_MSG(EDOTDOT, "RFS specific error"),
-+ ERRNO_MSG(EBADMSG, "Not a data message"),
-+ ERRNO_MSG(EOVERFLOW, "Value too large for defined data type"),
-+ ERRNO_MSG(ENOTUNIQ, "Name not unique on network"),
-+ ERRNO_MSG(EBADFD, "File descriptor in bad state"),
-+ ERRNO_MSG(EREMCHG, "Remote address changed"),
-+ ERRNO_MSG(ELIBACC, "Can not access a needed shared library"),
-+ ERRNO_MSG(ELIBBAD, "Accessing a corrupted shared library"),
-+ ERRNO_MSG(ELIBSCN, ".lib section in a.out corrupted"),
-+ ERRNO_MSG(ELIBMAX, "Attempting to link in too many shared libraries"),
-+ ERRNO_MSG(ELIBEXEC, "Cannot exec a shared library directly"),
-+ ERRNO_MSG(EILSEQ, "Illegal byte sequence"),
-+ ERRNO_MSG(ERESTART, "Interrupted system call should be restarted"),
-+ ERRNO_MSG(ESTRPIPE, "Streams pipe error"),
-+ ERRNO_MSG(EUSERS, "Too many users"),
-+ ERRNO_MSG(ENOTSOCK, "Socket operation on non-socket"),
-+ ERRNO_MSG(EDESTADDRREQ, "Destination address required"),
-+ ERRNO_MSG(EMSGSIZE, "Message too long"),
-+ ERRNO_MSG(EPROTOTYPE, "Protocol wrong type for socket"),
-+ ERRNO_MSG(ENOPROTOOPT, "Protocol not available"),
-+ ERRNO_MSG(EPROTONOSUPPORT, "Protocol not supported"),
-+ ERRNO_MSG(ESOCKTNOSUPPORT, "Socket type not supported"),
-+ ERRNO_MSG(EOPNOTSUPP, "Operation not supported on transport endpoint"),
-+ ERRNO_MSG(EPFNOSUPPORT, "Protocol family not supported"),
-+ ERRNO_MSG(AFNOSUPPORT, "Address family not supported by protocol"),
-+ ERRNO_MSG(EADDRINUSE, "Address already in use"),
-+ ERRNO_MSG(EADDRNOTAVAIL, "Cannot assign requested address"),
-+ ERRNO_MSG(ENETDOWN, "Network is down"),
-+ ERRNO_MSG(ENETUNREACH, "Network is unreachable"),
-+ ERRNO_MSG(ENETRESET, "Network dropped connection because of reset"),
-+ ERRNO_MSG(ECONNABORTED, "Software caused connection abort"),
-+ ERRNO_MSG(ECONNRESET, "Connection reset by peer"),
-+ ERRNO_MSG(ENOBUFS, "No buffer space available"),
-+ ERRNO_MSG(EISCONN, "Transport endpoint is already connected"),
-+ ERRNO_MSG(ENOTCONN, "Transport endpoint is not connected"),
-+ ERRNO_MSG(ESHUTDOWN, "Cannot send after transport endpoint shutdown"),
-+ ERRNO_MSG(ETOOMANYREFS, "Too many references: cannot splice"),
-+ ERRNO_MSG(ETIMEDOUT, "Connection timed out"),
-+ ERRNO_MSG(ECONNREFUSED, "Connection refused"),
-+ ERRNO_MSG(EHOSTDOWN, "Host is down"),
-+ ERRNO_MSG(EHOSTUNREACH, "No route to host"),
-+ ERRNO_MSG(EALREADY, "Operation already in progress"),
-+ ERRNO_MSG(EINPROGRESS, "Operation now in progress"),
-+ ERRNO_MSG(ESTALE, "Stale NFS file handle"),
-+ ERRNO_MSG(EUCLEAN, "Structure needs cleaning"),
-+ ERRNO_MSG(ENOTNAM, "Not a XENIX named type file"),
-+ ERRNO_MSG(ENAVAIL, "No XENIX semaphores available"),
-+ ERRNO_MSG(EISNAM, "Is a named type file"),
-+ ERRNO_MSG(EREMOTEIO, "Remote I/O error"),
-+ ERRNO_MSG(EDQUOT, "Quota exceeded"),
-+ ERRNO_MSG(ENOMEDIUM, "No medium found"),
-+ ERRNO_MSG(EMEDIUMTYPE, "Wrong medium type"),
-+};
-+
-+const char *errno_str(int errno)
-+{
-+ if (errno >= 0)
-+ return errno_message[0];
-+
-+ return errno_message[abs(errno)];
-+}
-diff -ruN u-boot-2015.01-rc3/lib/initcall.c u-boot/lib/initcall.c
---- u-boot-2015.01-rc3/lib/initcall.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/lib/initcall.c 2015-01-01 17:34:32.861493284 +0100
-@@ -19,7 +19,11 @@
-
- if (gd->flags & GD_FLG_RELOC)
- reloc_ofs = gd->reloc_off;
-- debug("initcall: %p\n", (char *)*init_fnc_ptr - reloc_ofs);
-+ debug("initcall: %p", (char *)*init_fnc_ptr - reloc_ofs);
-+ if (gd->flags & GD_FLG_RELOC)
-+ debug(" (relocated to %p)\n", (char *)*init_fnc_ptr);
-+ else
-+ debug("\n");
- ret = (*init_fnc_ptr)();
- if (ret) {
- printf("initcall sequence %p failed at call %p (err=%d)\n",
-diff -ruN u-boot-2015.01-rc3/lib/Makefile u-boot/lib/Makefile
---- u-boot-2015.01-rc3/lib/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/lib/Makefile 2015-01-01 17:34:32.857493350 +0100
-@@ -51,6 +51,7 @@
- obj-$(CONFIG_ADDR_MAP) += addr_map.o
- obj-y += hashtable.o
- obj-y += errno.o
-+obj-$(CONFIG_ERRNO_STR) += errno_str.o
- obj-y += display_options.o
- obj-$(CONFIG_BCH) += bch.o
- obj-y += crc32.o
-diff -ruN u-boot-2015.01-rc3/lib/string.c u-boot/lib/string.c
---- u-boot-2015.01-rc3/lib/string.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/lib/string.c 2015-01-01 17:34:32.861493284 +0100
-@@ -102,6 +102,31 @@
- }
- #endif
-
-+#ifndef __HAVE_ARCH_STRLCPY
-+/**
-+ * strlcpy - Copy a C-string into a sized buffer
-+ * @dest: Where to copy the string to
-+ * @src: Where to copy the string from
-+ * @size: size of destination buffer
-+ *
-+ * Compatible with *BSD: the result is always a valid
-+ * NUL-terminated string that fits in the buffer (unless,
-+ * of course, the buffer size is zero). It does not pad
-+ * out the result like strncpy() does.
-+ */
-+size_t strlcpy(char *dest, const char *src, size_t size)
-+{
-+ size_t ret = strlen(src);
-+
-+ if (size) {
-+ size_t len = (ret >= size) ? size - 1 : ret;
-+ memcpy(dest, src, len);
-+ dest[len] = '\0';
-+ }
-+ return ret;
-+}
-+#endif
-+
- #ifndef __HAVE_ARCH_STRCAT
- /**
- * strcat - Append one %NUL-terminated string to another
-diff -ruN u-boot-2015.01-rc3/MAINTAINERS u-boot/MAINTAINERS
---- u-boot-2015.01-rc3/MAINTAINERS 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/MAINTAINERS 2015-01-01 17:34:31.981507711 +0100
-@@ -128,6 +128,12 @@
- F: arch/arm/cpu/arm926ejs/spear/
- F: arch/arm/include/asm/arch-spear/
-
-+ARM STM STV0991
-+M: Vikas Manocha <vikas.manocha@st.com>
-+S: Maintained
-+F: arch/arm/cpu/armv7/stv0991/
-+F: arch/arm/include/asm/arch-stv0991/
-+
- ARM SUNXI
- M: Ian Campbell <ijc@hellion.org.uk>
- M: Hans De Goede <hdegoede@redhat.com>
-diff -ruN u-boot-2015.01-rc3/Makefile u-boot/Makefile
---- u-boot-2015.01-rc3/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/Makefile 2015-01-01 17:34:31.981507711 +0100
-@@ -1,7 +1,7 @@
- VERSION = 2015
- PATCHLEVEL = 01
- SUBLEVEL =
--EXTRAVERSION = -rc3
-+EXTRAVERSION = -rc4
- NAME =
-
- # *DOCUMENTATION*
-@@ -946,27 +946,43 @@
- ifneq ($(CONFIG_X86_RESET_VECTOR),)
- rom: u-boot.rom FORCE
-
--u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin \
-- $(srctree)/board/$(BOARDDIR)/mrc.bin
-- $(objtree)/tools/ifdtool -c -r $(CONFIG_ROM_SIZE) u-boot.tmp
-- if [ -n "$(CONFIG_HAVE_INTEL_ME)" ]; then \
-- $(objtree)/tools/ifdtool -D \
-- $(srctree)/board/$(BOARDDIR)/descriptor.bin u-boot.tmp; \
-- $(objtree)/tools/ifdtool \
-- -i ME:$(srctree)/board/$(BOARDDIR)/me.bin u-boot.tmp; \
-- fi
-- $(objtree)/tools/ifdtool -w \
-- $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-dtb.bin u-boot.tmp
-- $(objtree)/tools/ifdtool -w \
-- $(CONFIG_X86_MRC_START):$(srctree)/board/$(BOARDDIR)/mrc.bin \
-- u-boot.tmp
-- $(objtree)/tools/ifdtool -w \
-- $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin \
-- u-boot.tmp
-- $(objtree)/tools/ifdtool -w \
-- $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILENAME) \
-- u-boot.tmp
-- mv u-boot.tmp $@
-+IFDTOOL=$(objtree)/tools/ifdtool
-+IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb
-+IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
-+IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin
-+IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
-+
-+ifneq ($(CONFIG_HAVE_INTEL_ME),)
-+IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
-+IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
-+endif
-+
-+ifneq ($(CONFIG_HAVE_MRC),)
-+IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
-+endif
-+
-+ifneq ($(CONFIG_HAVE_FSP),)
-+IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
-+endif
-+
-+ifneq ($(CONFIG_HAVE_CMC),)
-+IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
-+endif
-+
-+ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),)
-+IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE)
-+endif
-+
-+quiet_cmd_ifdtool = IFDTOOL $@
-+cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
-+ifneq ($(CONFIG_HAVE_INTEL_ME),)
-+cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
-+endif
-+cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
-+cmd_ifdtool += mv u-boot.tmp $@
-+
-+u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin
-+ $(call if_changed,ifdtool)
-
- OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
- u-boot-x86-16bit.bin: u-boot FORCE
-@@ -999,15 +1015,22 @@
- #concatenated with u-boot binary. It is need by PowerPC SoC having
- #internal SRAM <= 512KB.
- MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-- -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
-+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
-+ -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
-
- spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
- $(call if_changed,mkimage)
-
-+ifeq ($(ARCH),arm)
-+UBOOT_BINLOAD := u-boot.img
-+else
-+UBOOT_BINLOAD := u-boot.bin
-+endif
-+
- OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
- --gap-fill=0xff
-
--u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
-+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
- $(call if_changed,pad_cat)
-
- # PPC4xx needs the SPL at the end of the image, since the reset vector
-diff -ruN u-boot-2015.01-rc3/README u-boot/README
---- u-boot-2015.01-rc3/README 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/README 2015-01-01 17:34:31.985507645 +0100
-@@ -1773,6 +1773,15 @@
- regarding the non-volatile storage device. Define this to
- the eMMC device that fastboot should use to store the image.
-
-+ CONFIG_FASTBOOT_GPT_NAME
-+ The fastboot "flash" command supports writing the downloaded
-+ image to the Protective MBR and the Primary GUID Partition
-+ Table. (Additionally, this downloaded image is post-processed
-+ to generate and write the Backup GUID Partition Table.)
-+ This occurs when the specified "partition name" on the
-+ "fastboot flash" command line matches this value.
-+ Default is GPT_ENTRY_NAME (currently "gpt") if undefined.
-+
- - Journaling Flash filesystem support:
- CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
- CONFIG_JFFS2_NAND_DEV
-diff -ruN u-boot-2015.01-rc3/scripts/binutils-version.sh u-boot/scripts/binutils-version.sh
---- u-boot-2015.01-rc3/scripts/binutils-version.sh 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/scripts/binutils-version.sh 2015-01-01 17:34:32.877493022 +0100
-@@ -14,7 +14,9 @@
- exit 1
- fi
-
--MAJOR=$($gas --version | head -1 | awk '{print $NF}' | cut -d . -f 1)
--MINOR=$($gas --version | head -1 | awk '{print $NF}' | cut -d . -f 2)
-+version_string=$($gas --version | head -1 | sed -e 's/.*) *\([0-9.]*\).*/\1/' )
-+
-+MAJOR=$(echo $version_string | cut -d . -f 1)
-+MINOR=$(echo $version_string | cut -d . -f 2)
-
- printf "%02d%02d\\n" $MAJOR $MINOR
-diff -ruN u-boot-2015.01-rc3/snapshot.commit u-boot/snapshot.commit
---- u-boot-2015.01-rc3/snapshot.commit 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/snapshot.commit 2015-01-01 17:34:32.885492891 +0100
-@@ -1 +1 @@
--32fdf0e4d82bdca5d64d86330e461e59685f9959 Mon, 8 Dec 2014 16:35:08 -0500
-+$Format:%H %cD$
-diff -ruN u-boot-2015.01-rc3/test/dm/cmd_dm.c u-boot/test/dm/cmd_dm.c
---- u-boot-2015.01-rc3/test/dm/cmd_dm.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/test/dm/cmd_dm.c 2015-01-01 17:34:32.885492891 +0100
-@@ -16,17 +16,65 @@
- #include <dm/test.h>
- #include <dm/uclass-internal.h>
-
-+static void show_devices(struct udevice *dev, int depth, int last_flag)
-+{
-+ int i, is_last;
-+ struct udevice *child;
-+ char class_name[12];
-+
-+ /* print the first 11 characters to not break the tree-format. */
-+ strlcpy(class_name, dev->uclass->uc_drv->name, sizeof(class_name));
-+ printf(" %-11s [ %c ] ", class_name,
-+ dev->flags & DM_FLAG_ACTIVATED ? '+' : ' ');
-+
-+ for (i = depth; i >= 0; i--) {
-+ is_last = (last_flag >> i) & 1;
-+ if (i) {
-+ if (is_last)
-+ printf(" ");
-+ else
-+ printf("| ");
-+ } else {
-+ if (is_last)
-+ printf("`-- ");
-+ else
-+ printf("|-- ");
-+ }
-+ }
-+
-+ printf("%s\n", dev->name);
-+
-+ list_for_each_entry(child, &dev->child_head, sibling_node) {
-+ is_last = list_is_last(&child->sibling_node, &dev->child_head);
-+ show_devices(child, depth + 1, (last_flag << 1) | is_last);
-+ }
-+}
-+
-+static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc,
-+ char * const argv[])
-+{
-+ struct udevice *root;
-+
-+ root = dm_root();
-+ if (root) {
-+ printf(" Class Probed Name\n");
-+ printf("----------------------------------------\n");
-+ show_devices(root, -1, 0);
-+ }
-+
-+ return 0;
-+}
-+
- /**
- * dm_display_line() - Display information about a single device
- *
- * Displays a single line of information with an option prefix
- *
- * @dev: Device to display
-- * @buf: Prefix to display at the start of the line
- */
--static void dm_display_line(struct udevice *dev, char *buf)
-+static void dm_display_line(struct udevice *dev)
- {
-- printf("%s- %c %s @ %08lx", buf,
-+ printf("- %c %s @ %08lx",
- dev->flags & DM_FLAG_ACTIVATED ? '*' : ' ',
- dev->name, (ulong)map_to_sysmem(dev));
- if (dev->req_seq != -1)
-@@ -34,53 +82,6 @@
- puts("\n");
- }
-
--static int display_succ(struct udevice *in, char *buf)
--{
-- int len;
-- int ip = 0;
-- char local[16];
-- struct udevice *pos, *n, *prev = NULL;
--
-- dm_display_line(in, buf);
--
-- if (list_empty(&in->child_head))
-- return 0;
--
-- len = strlen(buf);
-- strncpy(local, buf, sizeof(local));
-- snprintf(local + len, 2, "|");
-- if (len && local[len - 1] == '`')
-- local[len - 1] = ' ';
--
-- list_for_each_entry_safe(pos, n, &in->child_head, sibling_node) {
-- if (ip++)
-- display_succ(prev, local);
-- prev = pos;
-- }
--
-- snprintf(local + len, 2, "`");
-- display_succ(prev, local);
--
-- return 0;
--}
--
--static int dm_dump(struct udevice *dev)
--{
-- if (!dev)
-- return -EINVAL;
-- return display_succ(dev, "");
--}
--
--static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc,
-- char * const argv[])
--{
-- struct udevice *root;
--
-- root = dm_root();
-- printf("ROOT %08lx\n", (ulong)map_to_sysmem(root));
-- return dm_dump(root);
--}
--
- static int do_dm_dump_uclass(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
- {
-@@ -99,7 +100,7 @@
- if (list_empty(&uc->dev_head))
- continue;
- list_for_each_entry(dev, &uc->dev_head, uclass_node) {
-- dm_display_line(dev, "");
-+ dm_display_line(dev);
- }
- puts("\n");
- }
-diff -ruN u-boot-2015.01-rc3/test/dm/i2c.c u-boot/test/dm/i2c.c
---- u-boot-2015.01-rc3/test/dm/i2c.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/test/dm/i2c.c 2015-01-01 17:34:32.885492891 +0100
-@@ -0,0 +1,216 @@
-+/*
-+ * Copyright (C) 2013 Google, Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ *
-+ * Note: Test coverage does not include 10-bit addressing
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <fdtdec.h>
-+#include <i2c.h>
-+#include <dm/device-internal.h>
-+#include <dm/test.h>
-+#include <dm/uclass-internal.h>
-+#include <dm/ut.h>
-+#include <dm/util.h>
-+#include <asm/state.h>
-+#include <asm/test.h>
-+
-+static const int busnum;
-+static const int chip = 0x2c;
-+
-+/* Test that we can find buses and chips */
-+static int dm_test_i2c_find(struct dm_test_state *dms)
-+{
-+ struct udevice *bus, *dev;
-+ const int no_chip = 0x10;
-+
-+ ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_I2C, busnum,
-+ false, &bus));
-+
-+ /*
-+ * i2c_post_bind() will bind devices to chip selects. Check this then
-+ * remove the emulation and the slave device.
-+ */
-+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
-+ ut_assertok(i2c_probe(bus, chip, 0, &dev));
-+ ut_asserteq(-ENODEV, i2c_probe(bus, no_chip, 0, &dev));
-+ ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_I2C, 1, &bus));
-+
-+ return 0;
-+}
-+DM_TEST(dm_test_i2c_find, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
-+
-+static int dm_test_i2c_read_write(struct dm_test_state *dms)
-+{
-+ struct udevice *bus, *dev;
-+ uint8_t buf[5];
-+
-+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
-+ ut_assertok(i2c_get_chip(bus, chip, &dev));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
-+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "\0\0AB\0", sizeof(buf)));
-+
-+ return 0;
-+}
-+DM_TEST(dm_test_i2c_read_write, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
-+
-+static int dm_test_i2c_speed(struct dm_test_state *dms)
-+{
-+ struct udevice *bus, *dev;
-+ uint8_t buf[5];
-+
-+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
-+ ut_assertok(i2c_get_chip(bus, chip, &dev));
-+ ut_assertok(i2c_set_bus_speed(bus, 100000));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(i2c_set_bus_speed(bus, 400000));
-+ ut_asserteq(400000, i2c_get_bus_speed(bus));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_asserteq(-EINVAL, i2c_write(dev, 0, buf, 5));
-+
-+ return 0;
-+}
-+DM_TEST(dm_test_i2c_speed, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
-+
-+static int dm_test_i2c_offset_len(struct dm_test_state *dms)
-+{
-+ struct udevice *bus, *dev;
-+ uint8_t buf[5];
-+
-+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
-+ ut_assertok(i2c_get_chip(bus, chip, &dev));
-+ ut_assertok(i2c_set_chip_offset_len(dev, 1));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+
-+ /* This is not supported by the uclass */
-+ ut_asserteq(-EINVAL, i2c_set_chip_offset_len(dev, 5));
-+
-+ return 0;
-+}
-+DM_TEST(dm_test_i2c_offset_len, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
-+
-+static int dm_test_i2c_probe_empty(struct dm_test_state *dms)
-+{
-+ struct udevice *bus, *dev;
-+
-+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
-+ ut_assertok(i2c_probe(bus, SANDBOX_I2C_TEST_ADDR, 0, &dev));
-+
-+ return 0;
-+}
-+DM_TEST(dm_test_i2c_probe_empty, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
-+
-+static int dm_test_i2c_bytewise(struct dm_test_state *dms)
-+{
-+ struct udevice *bus, *dev;
-+ struct udevice *eeprom;
-+ uint8_t buf[5];
-+
-+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
-+ ut_assertok(i2c_get_chip(bus, chip, &dev));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
-+
-+ /* Tell the EEPROM to only read/write one register at a time */
-+ ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom));
-+ ut_assertnonnull(eeprom);
-+ sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_SINGLE_BYTE);
-+
-+ /* Now we only get the first byte - the rest will be 0xff */
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
-+
-+ /* If we do a separate transaction for each byte, it works */
-+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
-+
-+ /* This will only write A */
-+ ut_assertok(i2c_set_chip_flags(dev, 0));
-+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
-+
-+ /* Check that the B was ignored */
-+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "\0\0A\0\0\0", sizeof(buf)));
-+
-+ /* Now write it again with the new flags, it should work */
-+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS));
-+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
-+
-+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS |
-+ DM_I2C_CHIP_RD_ADDRESS));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "\0\0AB\0\0", sizeof(buf)));
-+
-+ /* Restore defaults */
-+ sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_NONE);
-+ ut_assertok(i2c_set_chip_flags(dev, 0));
-+
-+ return 0;
-+}
-+DM_TEST(dm_test_i2c_bytewise, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
-+
-+static int dm_test_i2c_offset(struct dm_test_state *dms)
-+{
-+ struct udevice *eeprom;
-+ struct udevice *dev;
-+ uint8_t buf[5];
-+
-+ ut_assertok(i2c_get_chip_for_busnum(busnum, chip, &dev));
-+
-+ /* Do a transfer so we can find the emulator */
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom));
-+
-+ /* Offset length 0 */
-+ sandbox_i2c_eeprom_set_offset_len(eeprom, 0);
-+ ut_assertok(i2c_set_chip_offset_len(dev, 0));
-+ ut_assertok(i2c_write(dev, 10 /* ignored */, (uint8_t *)"AB", 2));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "AB\0\0\0\0", sizeof(buf)));
-+
-+ /* Offset length 1 */
-+ sandbox_i2c_eeprom_set_offset_len(eeprom, 1);
-+ ut_assertok(i2c_set_chip_offset_len(dev, 1));
-+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
-+ ut_assertok(i2c_read(dev, 0, buf, 5));
-+ ut_assertok(memcmp(buf, "ABAB\0", sizeof(buf)));
-+
-+ /* Offset length 2 */
-+ sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
-+ ut_assertok(i2c_set_chip_offset_len(dev, 2));
-+ ut_assertok(i2c_write(dev, 0x210, (uint8_t *)"AB", 2));
-+ ut_assertok(i2c_read(dev, 0x210, buf, 5));
-+ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
-+
-+ /* Offset length 3 */
-+ sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
-+ ut_assertok(i2c_set_chip_offset_len(dev, 2));
-+ ut_assertok(i2c_write(dev, 0x410, (uint8_t *)"AB", 2));
-+ ut_assertok(i2c_read(dev, 0x410, buf, 5));
-+ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
-+
-+ /* Offset length 4 */
-+ sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
-+ ut_assertok(i2c_set_chip_offset_len(dev, 2));
-+ ut_assertok(i2c_write(dev, 0x420, (uint8_t *)"AB", 2));
-+ ut_assertok(i2c_read(dev, 0x420, buf, 5));
-+ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
-+
-+ /* Restore defaults */
-+ sandbox_i2c_eeprom_set_offset_len(eeprom, 1);
-+
-+ return 0;
-+}
-+DM_TEST(dm_test_i2c_offset, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
-diff -ruN u-boot-2015.01-rc3/test/dm/Makefile u-boot/test/dm/Makefile
---- u-boot-2015.01-rc3/test/dm/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/test/dm/Makefile 2015-01-01 17:34:32.885492891 +0100
-@@ -20,4 +20,5 @@
- obj-$(CONFIG_DM_GPIO) += gpio.o
- obj-$(CONFIG_DM_SPI) += spi.o
- obj-$(CONFIG_DM_SPI_FLASH) += sf.o
-+obj-$(CONFIG_DM_I2C) += i2c.o
- endif
-diff -ruN u-boot-2015.01-rc3/test/dm/test.dts u-boot/test/dm/test.dts
---- u-boot-2015.01-rc3/test/dm/test.dts 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/test/dm/test.dts 2015-01-01 17:34:32.885492891 +0100
-@@ -93,6 +93,23 @@
- num-gpios = <10>;
- };
-
-+ i2c@0 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+ compatible = "sandbox,i2c";
-+ clock-frequency = <100000>;
-+ eeprom@2c {
-+ reg = <0x2c>;
-+ compatible = "i2c-eeprom";
-+ emul {
-+ compatible = "sandbox,i2c-eeprom";
-+ sandbox,filename = "i2c.bin";
-+ sandbox,size = <256>;
-+ };
-+ };
-+ };
-+
- spi@0 {
- #address-cells = <1>;
- #size-cells = <0>;
-diff -ruN u-boot-2015.01-rc3/test/ums/ums_gadget_test.sh u-boot/test/ums/ums_gadget_test.sh
---- u-boot-2015.01-rc3/test/ums/ums_gadget_test.sh 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/test/ums/ums_gadget_test.sh 2015-01-01 17:34:32.885492891 +0100
-@@ -11,6 +11,7 @@
-
- COLOUR_RED="\33[31m"
- COLOUR_GREEN="\33[32m"
-+COLOUR_ORANGE="\33[33m"
- COLOUR_DEFAULT="\33[0m"
-
- DIR=./
-@@ -59,8 +60,15 @@
- fi
-
- cp ./$1 $MNT_DIR
-- umount $MNT_DIR
-
-+ while true; do
-+ umount $MNT_DIR > /dev/null 2>&1
-+ if [ $? -eq 0 ]; then
-+ break
-+ fi
-+ printf "$COLOUR_ORANGE\tSleeping to wait for umount...$COLOUR_DEFAULT\n"
-+ sleep 1
-+ done
-
- echo -n "TX: "
- calculate_md5sum $1
-diff -ruN u-boot-2015.01-rc3/tools/buildman/README u-boot/tools/buildman/README
---- u-boot-2015.01-rc3/tools/buildman/README 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/tools/buildman/README 2015-01-01 17:34:32.885492891 +0100
-@@ -42,7 +42,7 @@
- Buildman is a builder. It is not make, although it runs make. It does not
- produce any useful output on the terminal while building, except for
- progress information (except with -v, see below). All the output (errors,
--warnings and binaries if you are ask for them) is stored in output
-+warnings and binaries if you ask for them) is stored in output
- directories, which you can look at while the build is progressing, or when
- it is finished.
-
-@@ -121,7 +121,7 @@
- means to build all arm boards except nvidia, freescale and anything ending
- with 'ball'.
-
--It is convenient to use the -n option to see whaat will be built based on
-+It is convenient to use the -n option to see what will be built based on
- the subset given.
-
- Buildman does not store intermediate object files. It optionally copies
-@@ -371,7 +371,7 @@
-
-
- To find out how the build went, ask for a summary with -s. You can do this
--either before the build completes (presumably in another terminal) or or
-+either before the build completes (presumably in another terminal) or
- afterwards. Let's work through an example of how this is used:
-
- $ ./tools/buildman/buildman -b lcd9b -s
-@@ -439,7 +439,7 @@
-
- At commit 16, the error moves - you can see that the old error at line 120
- is fixed, but there is a new one at line 126. This is probably only because
--we added some code and moved the broken line father down the file.
-+we added some code and moved the broken line further down the file.
-
- If many boards have the same error, then -e will display the error only
- once. This makes the output as concise as possible. To see which boards have
-@@ -647,8 +647,8 @@
- board was built) and by 96 bytes for powerpc. This increase was offset in both
- cases by reductions in rodata and data/bss.
-
--Shown below the summary lines is the sizes for each board. Below each board
--is the sizes for each function. This information starts with:
-+Shown below the summary lines are the sizes for each board. Below each board
-+are the sizes for each function. This information starts with:
-
- add - number of functions added / removed
- grow - number of functions which grew / shrunk
-@@ -817,7 +817,7 @@
- This has mostly be written in my spare time as a response to my difficulties
- in testing large series of patches. Apart from tidying up there is quite a
- bit of scope for improvement. Things like better error diffs and easier
--access to log files. Also it would be nice it buildman could 'hunt' for
-+access to log files. Also it would be nice if buildman could 'hunt' for
- problems, perhaps by building a few boards for each arch, or checking
- commits for changed files and building only boards which use those files.
-
-diff -ruN u-boot-2015.01-rc3/tools/ifdtool.c u-boot/tools/ifdtool.c
---- u-boot-2015.01-rc3/tools/ifdtool.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/tools/ifdtool.c 2015-01-01 17:34:32.893492759 +0100
-@@ -18,6 +18,7 @@
- #include <unistd.h>
- #include <sys/types.h>
- #include <sys/stat.h>
-+#include <libfdt.h>
- #include "ifdtool.h"
-
- #undef DEBUG
-@@ -32,6 +33,18 @@
- #define FLREG_BASE(reg) ((reg & 0x00000fff) << 12);
- #define FLREG_LIMIT(reg) (((reg & 0x0fff0000) >> 4) | 0xfff);
-
-+enum input_file_type_t {
-+ IF_normal,
-+ IF_fdt,
-+ IF_uboot,
-+};
-+
-+struct input_file {
-+ char *fname;
-+ unsigned int addr;
-+ enum input_file_type_t type;
-+};
-+
- /**
- * find_fd() - Find the flash description in the ROM image
- *
-@@ -54,7 +67,8 @@
- return NULL;
- }
-
-- debug("Found Flash Descriptor signature at 0x%08x\n", i);
-+ debug("Found Flash Descriptor signature at 0x%08lx\n",
-+ (char *)ptr - image);
-
- return (struct fdbar_t *)ptr;
- }
-@@ -464,6 +478,16 @@
- return ret;
- }
-
-+static int perror_fname(const char *fmt, const char *fname)
-+{
-+ char msg[strlen(fmt) + strlen(fname) + 1];
-+
-+ sprintf(msg, fmt, fname);
-+ perror(msg);
-+
-+ return -1;
-+}
-+
- /**
- * write_image() - Write the image to a file
- *
-@@ -480,10 +504,10 @@
-
- new_fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, S_IRUSR |
- S_IWUSR | S_IRGRP | S_IROTH);
-- if (write(new_fd, image, size) != size) {
-- perror("Error while writing");
-- return -1;
-- }
-+ if (new_fd < 0)
-+ return perror_fname("Could not open file '%s'", filename);
-+ if (write(new_fd, image, size) != size)
-+ return perror_fname("Could not write file '%s'", filename);
- close(new_fd);
-
- return 0;
-@@ -585,14 +609,10 @@
- int fd = open(fname, O_RDONLY);
- struct stat buf;
-
-- if (fd == -1) {
-- perror("Could not open file");
-- return -1;
-- }
-- if (fstat(fd, &buf) == -1) {
-- perror("Could not stat file");
-- return -1;
-- }
-+ if (fd == -1)
-+ return perror_fname("Could not open file '%s'", fname);
-+ if (fstat(fd, &buf) == -1)
-+ return perror_fname("Could not stat file '%s'", fname);
- *sizep = buf.st_size;
- debug("File %s is %d bytes\n", fname, *sizep);
-
-@@ -686,7 +706,7 @@
- * 0xffffffff so use an address relative to that. For an
- * 8MB ROM the start address is 0xfff80000.
- * @write_fname: Filename to add to the image
-- * @return 0 if OK, -ve on error
-+ * @return number of bytes written if OK, -ve on error
- */
- static int write_data(char *image, int size, unsigned int addr,
- const char *write_fname)
-@@ -698,7 +718,7 @@
- if (write_fd < 0)
- return write_fd;
-
-- offset = addr + size;
-+ offset = (uint32_t)(addr + size);
- debug("Writing %s to offset %#x\n", write_fname, offset);
-
- if (offset < 0 || offset + write_size > size) {
-@@ -714,6 +734,68 @@
-
- close(write_fd);
-
-+ return write_size;
-+}
-+
-+/**
-+ * write_uboot() - Write U-Boot, device tree and microcode pointer
-+ *
-+ * This writes U-Boot into a place in the flash, followed by its device tree.
-+ * The microcode pointer is written so that U-Boot can find the microcode in
-+ * the device tree very early in boot.
-+ *
-+ * @image: Pointer to image
-+ * @size: Size of image in bytes
-+ * @uboot: Input file information for u-boot.bin
-+ * @fdt: Input file information for u-boot.dtb
-+ * @ucode_ptr: Address in U-Boot where the microcode pointer should be placed
-+ * @return 0 if OK, -ve on error
-+ */
-+static int write_uboot(char *image, int size, struct input_file *uboot,
-+ struct input_file *fdt, unsigned int ucode_ptr)
-+{
-+ const void *blob;
-+ const char *data;
-+ int uboot_size;
-+ uint32_t *ptr;
-+ int data_size;
-+ int offset;
-+ int node;
-+ int ret;
-+
-+ uboot_size = write_data(image, size, uboot->addr, uboot->fname);
-+ if (uboot_size < 0)
-+ return uboot_size;
-+ fdt->addr = uboot->addr + uboot_size;
-+ debug("U-Boot size %#x, FDT at %#x\n", uboot_size, fdt->addr);
-+ ret = write_data(image, size, fdt->addr, fdt->fname);
-+ if (ret < 0)
-+ return ret;
-+
-+ if (ucode_ptr) {
-+ blob = (void *)image + (uint32_t)(fdt->addr + size);
-+ debug("DTB at %lx\n", (char *)blob - image);
-+ node = fdt_node_offset_by_compatible(blob, 0,
-+ "intel,microcode");
-+ if (node < 0) {
-+ debug("No microcode found in FDT: %s\n",
-+ fdt_strerror(node));
-+ return -ENOENT;
-+ }
-+ data = fdt_getprop(blob, node, "data", &data_size);
-+ if (!data) {
-+ debug("No microcode data found in FDT: %s\n",
-+ fdt_strerror(data_size));
-+ return -ENOENT;
-+ }
-+ offset = ucode_ptr - uboot->addr;
-+ ptr = (void *)image + offset;
-+ ptr[0] = uboot->addr + (data - image);
-+ ptr[1] = data_size;
-+ debug("Wrote microcode pointer at %x: addr=%x, size=%x\n",
-+ ucode_ptr, ptr[0], ptr[1]);
-+ }
-+
- return 0;
- }
-
-@@ -732,6 +814,7 @@
- " -x | --extract: extract intel fd modules\n"
- " -i | --inject <region>:<module> inject file <module> into region <region>\n"
- " -w | --write <addr>:<file> write file to appear at memory address <addr>\n"
-+ " multiple files can be written simultaneously\n"
- " -s | --spifreq <20|33|50> set the SPI frequency\n"
- " -e | --em100 set SPI frequency to 20MHz and disable\n"
- " Dual Output Fast Read Support\n"
-@@ -778,17 +861,20 @@
- int mode_spifreq = 0, mode_em100 = 0, mode_locked = 0;
- int mode_unlocked = 0, mode_write = 0, mode_write_descriptor = 0;
- int create = 0;
-- char *region_type_string = NULL, *src_fname = NULL;
-- char *addr_str = NULL;
-+ char *region_type_string = NULL, *inject_fname = NULL;
-+ char *desc_fname = NULL, *addr_str = NULL;
- int region_type = -1, inputfreq = 0;
- enum spi_frequency spifreq = SPI_FREQUENCY_20MHZ;
-- unsigned int addr = 0;
-+ struct input_file input_file[WRITE_MAX], *ifile, *fdt = NULL;
-+ unsigned char wr_idx, wr_num = 0;
- int rom_size = -1;
- bool write_it;
- char *filename;
- char *outfile = NULL;
- struct stat buf;
- int size = 0;
-+ unsigned int ucode_ptr = 0;
-+ bool have_uboot = false;
- int bios_fd;
- char *image;
- int ret;
-@@ -798,18 +884,21 @@
- {"descriptor", 1, NULL, 'D'},
- {"em100", 0, NULL, 'e'},
- {"extract", 0, NULL, 'x'},
-+ {"fdt", 1, NULL, 'f'},
- {"inject", 1, NULL, 'i'},
- {"lock", 0, NULL, 'l'},
-+ {"microcode", 1, NULL, 'm'},
- {"romsize", 1, NULL, 'r'},
- {"spifreq", 1, NULL, 's'},
- {"unlock", 0, NULL, 'u'},
-+ {"uboot", 1, NULL, 'U'},
- {"write", 1, NULL, 'w'},
- {"version", 0, NULL, 'v'},
- {"help", 0, NULL, 'h'},
- {0, 0, 0, 0}
- };
-
-- while ((opt = getopt_long(argc, argv, "cdD:ehi:lr:s:uvw:x?",
-+ while ((opt = getopt_long(argc, argv, "cdD:ef:hi:lm:r:s:uU:vw:x?",
- long_options, &option_index)) != EOF) {
- switch (opt) {
- case 'c':
-@@ -820,14 +909,14 @@
- break;
- case 'D':
- mode_write_descriptor = 1;
-- src_fname = optarg;
-+ desc_fname = optarg;
- break;
- case 'e':
- mode_em100 = 1;
- break;
- case 'i':
- if (get_two_words(optarg, ®ion_type_string,
-- &src_fname)) {
-+ &inject_fname)) {
- print_usage(argv[0]);
- exit(EXIT_FAILURE);
- }
-@@ -852,6 +941,9 @@
- case 'l':
- mode_locked = 1;
- break;
-+ case 'm':
-+ ucode_ptr = strtoul(optarg, NULL, 0);
-+ break;
- case 'r':
- rom_size = strtol(optarg, NULL, 0);
- debug("ROM size %d\n", rom_size);
-@@ -885,12 +977,29 @@
- exit(EXIT_SUCCESS);
- break;
- case 'w':
-+ case 'U':
-+ case 'f':
-+ ifile = &input_file[wr_num];
- mode_write = 1;
-- if (get_two_words(optarg, &addr_str, &src_fname)) {
-- print_usage(argv[0]);
-- exit(EXIT_FAILURE);
-+ if (wr_num < WRITE_MAX) {
-+ if (get_two_words(optarg, &addr_str,
-+ &ifile->fname)) {
-+ print_usage(argv[0]);
-+ exit(EXIT_FAILURE);
-+ }
-+ ifile->addr = strtol(optarg, NULL, 0);
-+ ifile->type = opt == 'f' ? IF_fdt :
-+ opt == 'U' ? IF_uboot : IF_normal;
-+ if (ifile->type == IF_fdt)
-+ fdt = ifile;
-+ else if (ifile->type == IF_uboot)
-+ have_uboot = true;
-+ wr_num++;
-+ } else {
-+ fprintf(stderr,
-+ "The number of files to write simultaneously exceeds the limitation (%d)\n",
-+ WRITE_MAX);
- }
-- addr = strtol(optarg, NULL, 0);
- break;
- case 'x':
- mode_extract = 1;
-@@ -941,6 +1050,13 @@
- exit(EXIT_FAILURE);
- }
-
-+ if (have_uboot && !fdt) {
-+ fprintf(stderr,
-+ "You must supply a device tree file for U-Boot\n\n");
-+ print_usage(argv[0]);
-+ exit(EXIT_FAILURE);
-+ }
-+
- filename = argv[optind];
- if (optind + 2 != argc)
- outfile = argv[optind + 1];
-@@ -997,13 +1113,27 @@
- }
-
- if (mode_write_descriptor)
-- ret = write_data(image, size, -size, src_fname);
-+ ret = write_data(image, size, -size, desc_fname);
-
- if (mode_inject)
-- ret = inject_region(image, size, region_type, src_fname);
-+ ret = inject_region(image, size, region_type, inject_fname);
-
-- if (mode_write)
-- ret = write_data(image, size, addr, src_fname);
-+ if (mode_write) {
-+ for (wr_idx = 0; wr_idx < wr_num; wr_idx++) {
-+ ifile = &input_file[wr_idx];
-+ if (ifile->type == IF_fdt) {
-+ continue;
-+ } else if (ifile->type == IF_uboot) {
-+ ret = write_uboot(image, size, ifile, fdt,
-+ ucode_ptr);
-+ } else {
-+ ret = write_data(image, size, ifile->addr,
-+ ifile->fname);
-+ }
-+ if (ret < 0)
-+ break;
-+ }
-+ }
-
- if (mode_spifreq)
- set_spi_frequency(image, size, spifreq);
-@@ -1035,5 +1165,5 @@
- free(image);
- close(bios_fd);
-
-- return ret ? 1 : 0;
-+ return ret < 0 ? 1 : 0;
- }
-diff -ruN u-boot-2015.01-rc3/tools/ifdtool.h u-boot/tools/ifdtool.h
---- u-boot-2015.01-rc3/tools/ifdtool.h 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/tools/ifdtool.h 2015-01-01 17:34:32.893492759 +0100
-@@ -14,6 +14,8 @@
-
- #define IFDTOOL_VERSION "1.1-U-Boot"
-
-+#define WRITE_MAX 16
-+
- enum spi_frequency {
- SPI_FREQUENCY_20MHZ = 0,
- SPI_FREQUENCY_33MHZ = 1,
-diff -ruN u-boot-2015.01-rc3/tools/Makefile u-boot/tools/Makefile
---- u-boot-2015.01-rc3/tools/Makefile 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/tools/Makefile 2015-01-01 17:34:32.885492891 +0100
-@@ -126,6 +126,7 @@
- hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl
- HOSTCFLAGS_mkexynosspl.o := -pedantic
-
-+ifdtool-objs := $(LIBFDT_OBJS) ifdtool.o
- hostprogs-$(CONFIG_X86) += ifdtool
-
- hostprogs-$(CONFIG_MX23) += mxsboot
-diff -ruN u-boot-2015.01-rc3/tools/microcode-tool u-boot/tools/microcode-tool
---- u-boot-2015.01-rc3/tools/microcode-tool 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/tools/microcode-tool 2015-01-01 17:34:32.897492694 +0100
-@@ -0,0 +1,253 @@
-+#!/usr/bin/env python
-+#
-+# Copyright (c) 2014 Google, Inc
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+# Intel microcode update tool
-+
-+from optparse import OptionParser
-+import os
-+import re
-+import struct
-+import sys
-+
-+MICROCODE_DIR = 'arch/x86/dts/microcode'
-+
-+class Microcode:
-+ """Holds information about the microcode for a particular model of CPU.
-+
-+ Attributes:
-+ name: Name of the CPU this microcode is for, including any version
-+ information (e.g. 'm12206a7_00000029')
-+ model: Model code string (this is cpuid(1).eax, e.g. '206a7')
-+ words: List of hex words containing the microcode. The first 16 words
-+ are the public header.
-+ """
-+ def __init__(self, name, data):
-+ self.name = name
-+ # Convert data into a list of hex words
-+ self.words = []
-+ for value in ''.join(data).split(','):
-+ hexval = value.strip()
-+ if hexval:
-+ self.words.append(int(hexval, 0))
-+
-+ # The model is in the 4rd hex word
-+ self.model = '%x' % self.words[3]
-+
-+def ParseFile(fname):
-+ """Parse a micrcode.dat file and return the component parts
-+
-+ Args:
-+ fname: Filename to parse
-+ Returns:
-+ 3-Tuple:
-+ date: String containing date from the file's header
-+ license_text: List of text lines for the license file
-+ microcodes: List of Microcode objects from the file
-+ """
-+ re_date = re.compile('/\* *(.* [0-9]{4}) *\*/$')
-+ re_license = re.compile('/[^-*+] *(.*)$')
-+ re_name = re.compile('/\* *(.*)\.inc *\*/', re.IGNORECASE)
-+ microcodes = {}
-+ license_text = []
-+ date = ''
-+ data = []
-+ name = None
-+ with open(fname) as fd:
-+ for line in fd:
-+ line = line.rstrip()
-+ m_date = re_date.match(line)
-+ m_license = re_license.match(line)
-+ m_name = re_name.match(line)
-+ if m_name:
-+ if name:
-+ microcodes[name] = Microcode(name, data)
-+ name = m_name.group(1).lower()
-+ data = []
-+ elif m_license:
-+ license_text.append(m_license.group(1))
-+ elif m_date:
-+ date = m_date.group(1)
-+ else:
-+ data.append(line)
-+ if name:
-+ microcodes[name] = Microcode(name, data)
-+ return date, license_text, microcodes
-+
-+def List(date, microcodes, model):
-+ """List the available microcode chunks
-+
-+ Args:
-+ date: Date of the microcode file
-+ microcodes: Dict of Microcode objects indexed by name
-+ model: Model string to search for, or None
-+ """
-+ print 'Date: %s' % date
-+ if model:
-+ mcode_list, tried = FindMicrocode(microcodes, model.lower())
-+ print 'Matching models %s:' % (', '.join(tried))
-+ else:
-+ print 'All models:'
-+ mcode_list = [microcodes[m] for m in microcodes.keys()]
-+ for mcode in mcode_list:
-+ print '%-20s: model %s' % (mcode.name, mcode.model)
-+
-+def FindMicrocode(microcodes, model):
-+ """Find all the microcode chunks which match the given model.
-+
-+ This model is something like 306a9 (the value returned in eax from
-+ cpuid(1) when running on Intel CPUs). But we allow a partial match,
-+ omitting the last 1 or two characters to allow many families to have the
-+ same microcode.
-+
-+ If the model name is ambiguous we return a list of matches.
-+
-+ Args:
-+ microcodes: Dict of Microcode objects indexed by name
-+ model: String containing model name to find
-+ Returns:
-+ Tuple:
-+ List of matching Microcode objects
-+ List of abbreviations we tried
-+ """
-+ # Allow a full name to be used
-+ mcode = microcodes.get(model)
-+ if mcode:
-+ return [mcode], []
-+
-+ tried = []
-+ found = []
-+ for i in range(3):
-+ abbrev = model[:-i] if i else model
-+ tried.append(abbrev)
-+ for mcode in microcodes.values():
-+ if mcode.model.startswith(abbrev):
-+ found.append(mcode)
-+ if found:
-+ break
-+ return found, tried
-+
-+def CreateFile(date, license_text, mcode, outfile):
-+ """Create a microcode file in U-Boot's .dtsi format
-+
-+ Args:
-+ date: String containing date of original microcode file
-+ license: List of text lines for the license file
-+ mcode: Microcode object to write
-+ outfile: Filename to write to ('-' for stdout)
-+ """
-+ out = '''/*%s
-+ * ---
-+ * This is a device tree fragment. Use #include to add these properties to a
-+ * node.
-+ *
-+ * Date: %s
-+ */
-+
-+compatible = "intel,microcode";
-+intel,header-version = <%d>;
-+intel,update-revision = <%#x>;
-+intel,date-code = <%#x>;
-+intel,processor-signature = <%#x>;
-+intel,checksum = <%#x>;
-+intel,loader-revision = <%d>;
-+intel,processor-flags = <%#x>;
-+
-+/* The first 48-bytes are the public header which repeats the above data */
-+data = <%s
-+\t>;'''
-+ words = ''
-+ for i in range(len(mcode.words)):
-+ if not (i & 3):
-+ words += '\n'
-+ val = mcode.words[i]
-+ # Change each word so it will be little-endian in the FDT
-+ # This data is needed before RAM is available on some platforms so we
-+ # cannot do an endianness swap on boot.
-+ val = struct.unpack("<I", struct.pack(">I", val))[0]
-+ words += '\t%#010x' % val
-+
-+ # Take care to avoid adding a space before a tab
-+ text = ''
-+ for line in license_text:
-+ if line[0] == '\t':
-+ text += '\n *' + line
-+ else:
-+ text += '\n * ' + line
-+ args = [text, date]
-+ args += [mcode.words[i] for i in range(7)]
-+ args.append(words)
-+ if outfile == '-':
-+ print out % tuple(args)
-+ else:
-+ if not outfile:
-+ if not os.path.exists(MICROCODE_DIR):
-+ print >> sys.stderr, "Creating directory '%s'" % MICROCODE_DIR
-+ os.makedirs(MICROCODE_DIR)
-+ outfile = os.path.join(MICROCODE_DIR, mcode.name + '.dtsi')
-+ print >> sys.stderr, "Writing microcode for '%s' to '%s'" % (
-+ mcode.name, outfile)
-+ with open(outfile, 'w') as fd:
-+ print >> fd, out % tuple(args)
-+
-+def MicrocodeTool():
-+ """Run the microcode tool"""
-+ commands = 'create,license,list'.split(',')
-+ parser = OptionParser()
-+ parser.add_option('-d', '--mcfile', type='string', action='store',
-+ help='Name of microcode.dat file')
-+ parser.add_option('-m', '--model', type='string', action='store',
-+ help='Model name to extract')
-+ parser.add_option('-o', '--outfile', type='string', action='store',
-+ help='Filename to use for output (- for stdout), default is'
-+ ' %s/<name>.dtsi' % MICROCODE_DIR)
-+ parser.usage += """ command
-+
-+ Process an Intel microcode file (use -h for help). Commands:
-+
-+ create Create microcode .dtsi file for a model
-+ list List available models in microcode file
-+ license Print the license
-+
-+ Typical usage:
-+
-+ ./tools/microcode-tool -d microcode.dat -m 306a create
-+
-+ This will find the appropriate file and write it to %s.""" % MICROCODE_DIR
-+
-+ (options, args) = parser.parse_args()
-+ if not args:
-+ parser.error('Please specify a command')
-+ cmd = args[0]
-+ if cmd not in commands:
-+ parser.error("Unknown command '%s'" % cmd)
-+
-+ if not options.mcfile:
-+ parser.error('You must specify a microcode file')
-+ date, license_text, microcodes = ParseFile(options.mcfile)
-+
-+ if cmd == 'list':
-+ List(date, microcodes, options.model)
-+ elif cmd == 'license':
-+ print '\n'.join(license_text)
-+ elif cmd == 'create':
-+ if not options.model:
-+ parser.error('You must specify a model to create')
-+ model = options.model.lower()
-+ mcode_list, tried = FindMicrocode(microcodes, model)
-+ if not mcode_list:
-+ parser.error("Unknown model '%s' (%s) - try 'list' to list" %
-+ (model, ', '.join(tried)))
-+ if len(mcode_list) > 1:
-+ parser.error("Ambiguous model '%s' (%s) matched %s - try 'list' "
-+ "to list or specify a particular file" %
-+ (model, ', '.join(tried),
-+ ', '.join([m.name for m in mcode_list])))
-+ CreateFile(date, license_text, mcode_list[0], options.outfile)
-+ else:
-+ parser.error("Unknown command '%s'" % cmd)
-+
-+if __name__ == "__main__":
-+ MicrocodeTool()
-diff -ruN u-boot-2015.01-rc3/tools/microcode-tool.py u-boot/tools/microcode-tool.py
---- u-boot-2015.01-rc3/tools/microcode-tool.py 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot/tools/microcode-tool.py 2015-01-01 17:34:32.897492694 +0100
-@@ -0,0 +1,253 @@
-+#!/usr/bin/env python
-+#
-+# Copyright (c) 2014 Google, Inc
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+# Intel microcode update tool
-+
-+from optparse import OptionParser
-+import os
-+import re
-+import struct
-+import sys
-+
-+MICROCODE_DIR = 'arch/x86/dts/microcode'
-+
-+class Microcode:
-+ """Holds information about the microcode for a particular model of CPU.
-+
-+ Attributes:
-+ name: Name of the CPU this microcode is for, including any version
-+ information (e.g. 'm12206a7_00000029')
-+ model: Model code string (this is cpuid(1).eax, e.g. '206a7')
-+ words: List of hex words containing the microcode. The first 16 words
-+ are the public header.
-+ """
-+ def __init__(self, name, data):
-+ self.name = name
-+ # Convert data into a list of hex words
-+ self.words = []
-+ for value in ''.join(data).split(','):
-+ hexval = value.strip()
-+ if hexval:
-+ self.words.append(int(hexval, 0))
-+
-+ # The model is in the 4rd hex word
-+ self.model = '%x' % self.words[3]
-+
-+def ParseFile(fname):
-+ """Parse a micrcode.dat file and return the component parts
-+
-+ Args:
-+ fname: Filename to parse
-+ Returns:
-+ 3-Tuple:
-+ date: String containing date from the file's header
-+ license_text: List of text lines for the license file
-+ microcodes: List of Microcode objects from the file
-+ """
-+ re_date = re.compile('/\* *(.* [0-9]{4}) *\*/$')
-+ re_license = re.compile('/[^-*+] *(.*)$')
-+ re_name = re.compile('/\* *(.*)\.inc *\*/', re.IGNORECASE)
-+ microcodes = {}
-+ license_text = []
-+ date = ''
-+ data = []
-+ name = None
-+ with open(fname) as fd:
-+ for line in fd:
-+ line = line.rstrip()
-+ m_date = re_date.match(line)
-+ m_license = re_license.match(line)
-+ m_name = re_name.match(line)
-+ if m_name:
-+ if name:
-+ microcodes[name] = Microcode(name, data)
-+ name = m_name.group(1).lower()
-+ data = []
-+ elif m_license:
-+ license_text.append(m_license.group(1))
-+ elif m_date:
-+ date = m_date.group(1)
-+ else:
-+ data.append(line)
-+ if name:
-+ microcodes[name] = Microcode(name, data)
-+ return date, license_text, microcodes
-+
-+def List(date, microcodes, model):
-+ """List the available microcode chunks
-+
-+ Args:
-+ date: Date of the microcode file
-+ microcodes: Dict of Microcode objects indexed by name
-+ model: Model string to search for, or None
-+ """
-+ print 'Date: %s' % date
-+ if model:
-+ mcode_list, tried = FindMicrocode(microcodes, model.lower())
-+ print 'Matching models %s:' % (', '.join(tried))
-+ else:
-+ print 'All models:'
-+ mcode_list = [microcodes[m] for m in microcodes.keys()]
-+ for mcode in mcode_list:
-+ print '%-20s: model %s' % (mcode.name, mcode.model)
-+
-+def FindMicrocode(microcodes, model):
-+ """Find all the microcode chunks which match the given model.
-+
-+ This model is something like 306a9 (the value returned in eax from
-+ cpuid(1) when running on Intel CPUs). But we allow a partial match,
-+ omitting the last 1 or two characters to allow many families to have the
-+ same microcode.
-+
-+ If the model name is ambiguous we return a list of matches.
-+
-+ Args:
-+ microcodes: Dict of Microcode objects indexed by name
-+ model: String containing model name to find
-+ Returns:
-+ Tuple:
-+ List of matching Microcode objects
-+ List of abbreviations we tried
-+ """
-+ # Allow a full name to be used
-+ mcode = microcodes.get(model)
-+ if mcode:
-+ return [mcode], []
-+
-+ tried = []
-+ found = []
-+ for i in range(3):
-+ abbrev = model[:-i] if i else model
-+ tried.append(abbrev)
-+ for mcode in microcodes.values():
-+ if mcode.model.startswith(abbrev):
-+ found.append(mcode)
-+ if found:
-+ break
-+ return found, tried
-+
-+def CreateFile(date, license_text, mcode, outfile):
-+ """Create a microcode file in U-Boot's .dtsi format
-+
-+ Args:
-+ date: String containing date of original microcode file
-+ license: List of text lines for the license file
-+ mcode: Microcode object to write
-+ outfile: Filename to write to ('-' for stdout)
-+ """
-+ out = '''/*%s
-+ * ---
-+ * This is a device tree fragment. Use #include to add these properties to a
-+ * node.
-+ *
-+ * Date: %s
-+ */
-+
-+compatible = "intel,microcode";
-+intel,header-version = <%d>;
-+intel,update-revision = <%#x>;
-+intel,date-code = <%#x>;
-+intel,processor-signature = <%#x>;
-+intel,checksum = <%#x>;
-+intel,loader-revision = <%d>;
-+intel,processor-flags = <%#x>;
-+
-+/* The first 48-bytes are the public header which repeats the above data */
-+data = <%s
-+\t>;'''
-+ words = ''
-+ for i in range(len(mcode.words)):
-+ if not (i & 3):
-+ words += '\n'
-+ val = mcode.words[i]
-+ # Change each word so it will be little-endian in the FDT
-+ # This data is needed before RAM is available on some platforms so we
-+ # cannot do an endianness swap on boot.
-+ val = struct.unpack("<I", struct.pack(">I", val))[0]
-+ words += '\t%#010x' % val
-+
-+ # Take care to avoid adding a space before a tab
-+ text = ''
-+ for line in license_text:
-+ if line[0] == '\t':
-+ text += '\n *' + line
-+ else:
-+ text += '\n * ' + line
-+ args = [text, date]
-+ args += [mcode.words[i] for i in range(7)]
-+ args.append(words)
-+ if outfile == '-':
-+ print out % tuple(args)
-+ else:
-+ if not outfile:
-+ if not os.path.exists(MICROCODE_DIR):
-+ print >> sys.stderr, "Creating directory '%s'" % MICROCODE_DIR
-+ os.makedirs(MICROCODE_DIR)
-+ outfile = os.path.join(MICROCODE_DIR, mcode.name + '.dtsi')
-+ print >> sys.stderr, "Writing microcode for '%s' to '%s'" % (
-+ mcode.name, outfile)
-+ with open(outfile, 'w') as fd:
-+ print >> fd, out % tuple(args)
-+
-+def MicrocodeTool():
-+ """Run the microcode tool"""
-+ commands = 'create,license,list'.split(',')
-+ parser = OptionParser()
-+ parser.add_option('-d', '--mcfile', type='string', action='store',
-+ help='Name of microcode.dat file')
-+ parser.add_option('-m', '--model', type='string', action='store',
-+ help='Model name to extract')
-+ parser.add_option('-o', '--outfile', type='string', action='store',
-+ help='Filename to use for output (- for stdout), default is'
-+ ' %s/<name>.dtsi' % MICROCODE_DIR)
-+ parser.usage += """ command
-+
-+ Process an Intel microcode file (use -h for help). Commands:
-+
-+ create Create microcode .dtsi file for a model
-+ list List available models in microcode file
-+ license Print the license
-+
-+ Typical usage:
-+
-+ ./tools/microcode-tool -d microcode.dat -m 306a create
-+
-+ This will find the appropriate file and write it to %s.""" % MICROCODE_DIR
-+
-+ (options, args) = parser.parse_args()
-+ if not args:
-+ parser.error('Please specify a command')
-+ cmd = args[0]
-+ if cmd not in commands:
-+ parser.error("Unknown command '%s'" % cmd)
-+
-+ if not options.mcfile:
-+ parser.error('You must specify a microcode file')
-+ date, license_text, microcodes = ParseFile(options.mcfile)
-+
-+ if cmd == 'list':
-+ List(date, microcodes, options.model)
-+ elif cmd == 'license':
-+ print '\n'.join(license_text)
-+ elif cmd == 'create':
-+ if not options.model:
-+ parser.error('You must specify a model to create')
-+ model = options.model.lower()
-+ mcode_list, tried = FindMicrocode(microcodes, model)
-+ if not mcode_list:
-+ parser.error("Unknown model '%s' (%s) - try 'list' to list" %
-+ (model, ', '.join(tried)))
-+ if len(mcode_list) > 1:
-+ parser.error("Ambiguous model '%s' (%s) matched %s - try 'list' "
-+ "to list or specify a particular file" %
-+ (model, ', '.join(tried),
-+ ', '.join([m.name for m in mcode_list])))
-+ CreateFile(date, license_text, mcode_list[0], options.outfile)
-+ else:
-+ parser.error("Unknown command '%s'" % cmd)
-+
-+if __name__ == "__main__":
-+ MicrocodeTool()
-diff -ruN u-boot-2015.01-rc3/tools/pblimage.c u-boot/tools/pblimage.c
---- u-boot-2015.01-rc3/tools/pblimage.c 2014-12-08 22:35:08.000000000 +0100
-+++ u-boot/tools/pblimage.c 2015-01-01 17:34:32.905492563 +0100
-@@ -1,5 +1,5 @@
- /*
-- * Copyright 2012 Freescale Semiconductor, Inc.
-+ * Copyright 2012-2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-@@ -8,6 +8,10 @@
- #include "pblimage.h"
- #include "pbl_crc32.h"
-
-+#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-+#define PBL_ACS_CONT_CMD 0x81000000
-+#define PBL_ADDR_24BIT_MASK 0x00ffffff
-+
- /*
- * Initialize to an invalid value.
- */
-@@ -22,6 +26,13 @@
- static char *fname = "Unknown";
- static int lineno = -1;
- static struct pbl_header pblimage_header;
-+static int uboot_size;
-+static int arch_flag;
-+
-+static uint32_t pbl_cmd_initaddr;
-+static uint32_t pbi_crc_cmd1;
-+static uint32_t pbi_crc_cmd2;
-+static uint32_t pbl_end_cmd[4];
-
- static union
- {
-@@ -38,20 +49,6 @@
- * start offset by subtracting the size of the u-boot image from the
- * top of the allowable 24-bit range.
- */
--static void init_next_pbl_cmd(FILE *fp_uboot)
--{
-- struct stat st;
-- int fd = fileno(fp_uboot);
--
-- if (fstat(fd, &st) == -1) {
-- printf("Error: Could not determine u-boot image size. %s\n",
-- strerror(errno));
-- exit(EXIT_FAILURE);
-- }
--
-- next_pbl_cmd = 0x82000000 - st.st_size;
--}
--
- static void generate_pbl_cmd(void)
- {
- uint32_t val = next_pbl_cmd;
-@@ -66,11 +63,15 @@
-
- static void pbl_fget(size_t size, FILE *stream)
- {
-- unsigned char c;
-+ unsigned char c = 0xff;
- int c_temp;
-
-- while (size && (c_temp = fgetc(stream)) != EOF) {
-- c = (unsigned char)c_temp;
-+ while (size) {
-+ c_temp = fgetc(stream);
-+ if (c_temp != EOF)
-+ c = (unsigned char)c_temp;
-+ else if ((c_temp == EOF) && (arch_flag == IH_ARCH_ARM))
-+ c = 0xff;
- *pmem_buf++ = c;
- pbl_size++;
- size--;
-@@ -80,8 +81,8 @@
- /* load split u-boot with PBI command 81xxxxxx. */
- static void load_uboot(FILE *fp_uboot)
- {
-- init_next_pbl_cmd(fp_uboot);
-- while (next_pbl_cmd < 0x82000000) {
-+ next_pbl_cmd = pbl_cmd_initaddr - uboot_size;
-+ while (next_pbl_cmd < pbl_cmd_initaddr) {
- generate_pbl_cmd();
- pbl_fget(64, fp_uboot);
- }
-@@ -154,8 +155,6 @@
- /* write end command and crc command to memory. */
- static void add_end_cmd(void)
- {
-- uint32_t pbl_end_cmd[4] = {0x09138000, 0x00000000,
-- 0x091380c0, 0x00000000};
- uint32_t crc32_pbl;
- int i;
- unsigned char *p = (unsigned char *)&pbl_end_cmd;
-@@ -172,8 +171,8 @@
-
- /* Add PBI CRC command. */
- *pmem_buf++ = 0x08;
-- *pmem_buf++ = 0x13;
-- *pmem_buf++ = 0x80;
-+ *pmem_buf++ = pbi_crc_cmd1;
-+ *pmem_buf++ = pbi_crc_cmd2;
- *pmem_buf++ = 0x40;
- pbl_size += 4;
-
-@@ -184,17 +183,6 @@
- *pmem_buf++ = (crc32_pbl >> 8) & 0xff;
- *pmem_buf++ = (crc32_pbl) & 0xff;
- pbl_size += 4;
--
-- if ((pbl_size % 16) != 0) {
-- for (i = 0; i < 8; i++) {
-- *pmem_buf++ = 0x0;
-- pbl_size++;
-- }
-- }
-- if ((pbl_size % 16 != 0)) {
-- printf("Error: Bad size of image file\n");
-- exit(EXIT_FAILURE);
-- }
- }
-
- void pbl_load_uboot(int ifd, struct image_tool_params *params)
-@@ -268,12 +256,64 @@
- /*nothing need to do, pbl_load_uboot takes care of whole file. */
- }
-
-+int pblimage_check_params(struct image_tool_params *params)
-+{
-+ FILE *fp_uboot;
-+ int fd;
-+ struct stat st;
-+
-+ if (!params)
-+ return EXIT_FAILURE;
-+
-+ fp_uboot = fopen(params->datafile, "r");
-+ if (fp_uboot == NULL) {
-+ printf("Error: %s open failed\n", params->datafile);
-+ exit(EXIT_FAILURE);
-+ }
-+ fd = fileno(fp_uboot);
-+
-+ if (fstat(fd, &st) == -1) {
-+ printf("Error: Could not determine u-boot image size. %s\n",
-+ strerror(errno));
-+ exit(EXIT_FAILURE);
-+ }
-+
-+ /* For the variable size, we need to pad it to 64 byte boundary */
-+ uboot_size = roundup(st.st_size, 64);
-+
-+ if (params->arch == IH_ARCH_ARM) {
-+ arch_flag = IH_ARCH_ARM;
-+ pbi_crc_cmd1 = 0x61;
-+ pbi_crc_cmd2 = 0;
-+ pbl_cmd_initaddr = params->addr & PBL_ADDR_24BIT_MASK;
-+ pbl_cmd_initaddr |= PBL_ACS_CONT_CMD;
-+ pbl_cmd_initaddr |= uboot_size;
-+ pbl_end_cmd[0] = 0x09610000;
-+ pbl_end_cmd[1] = 0x00000000;
-+ pbl_end_cmd[2] = 0x096100c0;
-+ pbl_end_cmd[3] = 0x00000000;
-+ } else if (params->arch == IH_ARCH_PPC) {
-+ arch_flag = IH_ARCH_PPC;
-+ pbi_crc_cmd1 = 0x13;
-+ pbi_crc_cmd2 = 0x80;
-+ pbl_cmd_initaddr = 0x82000000;
-+ pbl_end_cmd[0] = 0x09138000;
-+ pbl_end_cmd[1] = 0x00000000;
-+ pbl_end_cmd[2] = 0x091380c0;
-+ pbl_end_cmd[3] = 0x00000000;
-+ }
-+
-+ next_pbl_cmd = pbl_cmd_initaddr;
-+ return 0;
-+};
-+
- /* pblimage parameters */
- static struct image_type_params pblimage_params = {
- .name = "Freescale PBL Boot Image support",
- .header_size = sizeof(struct pbl_header),
- .hdr = (void *)&pblimage_header,
- .check_image_type = pblimage_check_image_types,
-+ .check_params = pblimage_check_params,
- .verify_header = pblimage_verify_header,
- .print_header = pblimage_print_header,
- .set_header = pblimage_set_header,
projects / openwrt / staging / adrian.git / commitdiff