ath9k: fix some issues in the ap powersave fixes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36829

diff --git a/package/mac80211/patches/300-pending_work.patch b/package/mac80211/patches/300-pending_work.patch
index 2ad482857ab5d28204edb258e3672c9e3507bf12..46e539bebfe94093d4a90bd62592c16abb76d65d 100644 (file)
--- a/package/mac80211/patches/300-pending_work.patch
+++ b/package/mac80211/patches/300-pending_work.patch
@@ -822,7 +822,24 @@
   * @ssid_len: Length of SSID given in @ssid.
   * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
   * @txpower: TX power in dBm
-@@ -562,6 +562,9 @@ enum mac80211_rate_control_flags {
+@@ -459,6 +459,8 @@ struct ieee80211_bss_conf {
+  * @IEEE80211_TX_CTL_DONTFRAG: Don't fragment this packet even if it
+  *    would be fragmented by size (this is optional, only used for
+  *    monitor injection).
++ * @IEEE80211_TX_CTL_PS_RESPONSE: This frame is a response to a poll
++ *    frame (PS-Poll or uAPSD).
+  *
+  * Note: If you have to add new flags to the enumeration, then don't
+  *     forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
+@@ -494,6 +496,7 @@ enum mac80211_tx_control_flags {
+       IEEE80211_TX_STATUS_EOSP                = BIT(28),
+       IEEE80211_TX_CTL_USE_MINRATE            = BIT(29),
+       IEEE80211_TX_CTL_DONTFRAG               = BIT(30),
++      IEEE80211_TX_CTL_PS_RESPONSE            = BIT(31),
+ };
+ 
+ #define IEEE80211_TX_CTL_STBC_SHIFT           23
+@@ -562,6 +565,9 @@ enum mac80211_rate_control_flags {
  /* maximum number of rate stages */
  #define IEEE80211_TX_MAX_RATES        4
  
@@ -832,7 +849,7 @@
  /**
   * struct ieee80211_tx_rate - rate selection/status
   *
-@@ -602,8 +605,8 @@ static inline void ieee80211_rate_set_vh
+@@ -602,8 +608,8 @@ static inline void ieee80211_rate_set_vh
                                          u8 mcs, u8 nss)
  {
        WARN_ON(mcs & ~0xF);
@@ -843,7 +860,7 @@
  }
  
  static inline u8
-@@ -615,7 +618,7 @@ ieee80211_rate_get_vht_mcs(const struct 
+@@ -615,7 +621,7 @@ ieee80211_rate_get_vht_mcs(const struct 
  static inline u8
  ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
  {
@@ -852,7 +869,7 @@
  }
  
  /**
-@@ -656,7 +659,11 @@ struct ieee80211_tx_info {
+@@ -656,7 +662,11 @@ struct ieee80211_tx_info {
                                        struct ieee80211_tx_rate rates[
                                                IEEE80211_TX_MAX_RATES];
                                        s8 rts_cts_rate_idx;
@@ -865,7 +882,7 @@
                                };
                                /* only needed before rate control */
                                unsigned long jiffies;
-@@ -677,6 +684,8 @@ struct ieee80211_tx_info {
+@@ -677,6 +687,8 @@ struct ieee80211_tx_info {
                struct {
                        struct ieee80211_tx_rate driver_rates[
                                IEEE80211_TX_MAX_RATES];
@@ -874,7 +891,7 @@
                        void *rate_driver_data[
                                IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)];
                };
-@@ -840,6 +849,9 @@ enum mac80211_rx_flags {
+@@ -840,6 +852,9 @@ enum mac80211_rx_flags {
   * @signal: signal strength when receiving this frame, either in dBm, in dB or
   *    unspecified depending on the hardware capabilities flags
   *    @IEEE80211_HW_SIGNAL_*
@@ -884,7 +901,7 @@
   * @antenna: antenna used
   * @rate_idx: index of data rate into band's supported rates or MCS index if
   *    HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
-@@ -871,6 +883,8 @@ struct ieee80211_rx_status {
+@@ -871,6 +886,8 @@ struct ieee80211_rx_status {
        u8 band;
        u8 antenna;
        s8 signal;
@@ -893,7 +910,7 @@
        u8 ampdu_delimiter_crc;
        u8 vendor_radiotap_align;
        u8 vendor_radiotap_oui[3];
-@@ -1018,13 +1032,13 @@ struct ieee80211_conf {
+@@ -1018,13 +1035,13 @@ struct ieee80211_conf {
   *    the driver passed into mac80211.
   * @block_tx: Indicates whether transmission must be blocked before the
   *    scheduled channel switch, as indicated by the AP.
@@ -909,7 +926,7 @@
        u8 count;
  };
  
-@@ -1222,6 +1236,24 @@ enum ieee80211_sta_rx_bandwidth {
+@@ -1222,6 +1239,24 @@ enum ieee80211_sta_rx_bandwidth {
  };
  
  /**
@@ -934,7 +951,7 @@
   * struct ieee80211_sta - station table entry
   *
   * A station table entry represents a station we are possibly
-@@ -1248,6 +1280,7 @@ enum ieee80211_sta_rx_bandwidth {
+@@ -1248,6 +1283,7 @@ enum ieee80211_sta_rx_bandwidth {
   *    notifications and capabilities. The value is only valid after
   *    the station moves to associated state.
   * @smps_mode: current SMPS mode (off, static or dynamic)
@@ -942,7 +959,7 @@
   */
  struct ieee80211_sta {
        u32 supp_rates[IEEE80211_NUM_BANDS];
-@@ -1261,6 +1294,7 @@ struct ieee80211_sta {
+@@ -1261,6 +1297,7 @@ struct ieee80211_sta {
        u8 rx_nss;
        enum ieee80211_sta_rx_bandwidth bandwidth;
        enum ieee80211_smps_mode smps_mode;
@@ -950,7 +967,7 @@
  
        /* must be last */
        u8 drv_priv[0] __aligned(sizeof(void *));
-@@ -1416,6 +1450,9 @@ struct ieee80211_tx_control {
+@@ -1416,6 +1453,9 @@ struct ieee80211_tx_control {
   *    for different virtual interfaces. See the doc section on HW queue
   *    control for more details.
   *
@@ -960,7 +977,7 @@
   * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any
   *    P2P Interface. This will be honoured even if more than one interface
   *    is supported.
-@@ -1448,6 +1485,7 @@ enum ieee80211_hw_flags {
+@@ -1448,6 +1488,7 @@ enum ieee80211_hw_flags {
        IEEE80211_HW_SUPPORTS_PER_STA_GTK               = 1<<21,
        IEEE80211_HW_AP_LINK_PS                         = 1<<22,
        IEEE80211_HW_TX_AMPDU_SETUP_IN_HW               = 1<<23,
@@ -968,7 +985,7 @@
        IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF              = 1<<25,
        IEEE80211_HW_TIMING_BEACON_ONLY                 = 1<<26,
  };
-@@ -3144,6 +3182,25 @@ void ieee80211_sta_set_buffered(struct i
+@@ -3144,6 +3185,25 @@ void ieee80211_sta_set_buffered(struct i
                                u8 tid, bool buffered);
  
  /**
@@ -994,7 +1011,7 @@
   * ieee80211_tx_status - transmit status callback
   *
   * Call this function for all transmitted frames after they have been
-@@ -4118,7 +4175,7 @@ void ieee80211_send_bar(struct ieee80211
+@@ -4118,7 +4178,7 @@ void ieee80211_send_bar(struct ieee80211
   *    (deprecated; this will be removed once drivers get updated to use
   *    rate_idx_mask)
   * @rate_idx_mask: user-requested (legacy) rate mask
@@ -1003,7 +1020,7 @@
   * @bss: whether this frame is sent out in AP or IBSS mode
   */
  struct ieee80211_tx_rate_control {
-@@ -4130,7 +4187,7 @@ struct ieee80211_tx_rate_control {
+@@ -4130,7 +4190,7 @@ struct ieee80211_tx_rate_control {
        bool rts, short_preamble;
        u8 max_rate_idx;
        u32 rate_idx_mask;
@@ -1012,7 +1029,7 @@
        bool bss;
  };
  
-@@ -4219,6 +4276,22 @@ bool rate_usable_index_exists(struct iee
+@@ -4219,6 +4279,22 @@ bool rate_usable_index_exists(struct iee
        return false;
  }
  
@@ -3952,6 +3969,24 @@
  
        if (sta_prepare_rate_control(local, sta, gfp)) {
                kfree(sta);
+@@ -1130,6 +1132,7 @@ static void ieee80211_send_null_response
+        * ends the poll/service period.
+        */
+       info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER |
++                     IEEE80211_TX_CTL_PS_RESPONSE |
+                      IEEE80211_TX_STATUS_EOSP |
+                      IEEE80211_TX_CTL_REQ_TX_STATUS;
+ 
+@@ -1267,7 +1270,8 @@ ieee80211_sta_ps_deliver_response(struct
+                        * STA may still remain is PS mode after this frame
+                        * exchange.
+                        */
+-                      info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
++                      info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER |
++                                     IEEE80211_TX_CTL_PS_RESPONSE;
+ 
+                       /*
+                        * Use MoreData flag to indicate whether there are
 --- a/net/wireless/nl80211.c
 +++ b/net/wireless/nl80211.c
 @@ -2270,6 +2270,7 @@ static const struct nla_policy mntr_flag
@@ -4737,7 +4772,7 @@
        }
  
 -      ath_tx_start_dma(sc, skb, txctl);
-+      if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) {
++      if (info->flags & IEEE80211_TX_CTL_PS_RESPONSE) {
 +              ath_txq_unlock(sc, txq);
 +              txq = sc->tx.uapsdq;
 +              ath_txq_lock(sc, txq);

diff --git a/package/mac80211/patches/520-mac80211_cur_txpower.patch b/package/mac80211/patches/520-mac80211_cur_txpower.patch
index 54ba91f974999f20918becd431a79f774aacbe76..e2759edf92eda526a5dba7ae944cd8a53b672f8a 100644 (file)
--- a/package/mac80211/patches/520-mac80211_cur_txpower.patch
+++ b/package/mac80211/patches/520-mac80211_cur_txpower.patch
@@ -1,6 +1,6 @@
 --- a/include/net/mac80211.h
 +++ b/include/net/mac80211.h
-@@ -1605,6 +1605,7 @@ struct ieee80211_hw {
+@@ -1608,6 +1608,7 @@ struct ieee80211_hw {
        u8 max_tx_aggregation_subframes;
        u8 offchannel_tx_hw_queue;
        u8 radiotap_mcs_details;

diff --git a/package/mac80211/patches/523-mac80211_configure_antenna_gain.patch b/package/mac80211/patches/523-mac80211_configure_antenna_gain.patch
index 1b0730bd60caa98463c0747ae5f4bc4e45078f4c..d5c8ccf04cea203e5efbce350f3fd0413b89484b 100644 (file)
--- a/package/mac80211/patches/523-mac80211_configure_antenna_gain.patch
+++ b/package/mac80211/patches/523-mac80211_configure_antenna_gain.patch
@@ -1,6 +1,6 @@
 --- a/include/net/mac80211.h
 +++ b/include/net/mac80211.h
-@@ -988,6 +988,7 @@ enum ieee80211_smps_mode {
+@@ -991,6 +991,7 @@ enum ieee80211_smps_mode {
   *
   * @power_level: requested transmit power (in dBm), backward compatibility
   *    value only that is set to the minimum of all interfaces
@@ -8,7 +8,7 @@
   *
   * @chandef: the channel definition to tune to
   * @radar_enabled: whether radar detection is enabled
-@@ -1009,6 +1010,7 @@ struct ieee80211_conf {
+@@ -1012,6 +1013,7 @@ struct ieee80211_conf {
        u32 flags;
        int power_level, dynamic_ps_timeout;
        int max_sleep_period;