do no longer rename amba-pl010 serial devices names

Back in the days when we could not override /etc/inittab, it made a lot
of sense to rename ttyAM to ttyS since this was the only supported
serial device(s), we can now just put in an appropriate /etc/inittab file
now.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34469

diff --git a/target/linux/adm5120/base-files/etc/inittab b/target/linux/adm5120/base-files/etc/inittab
new file mode 100644 (file)
index 0000000..9f7c0ae
--- /dev/null
+++ b/target/linux/adm5120/base-files/etc/inittab
@@ -0,0 +1,5 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+tts/0::askfirst:/bin/ash --login
+ttyAM0::askfirst:/bin/ash --login
+tty1::askfirst:/bin/ash --login

diff --git a/target/linux/adm5120/config-3.3 b/target/linux/adm5120/config-3.3
index 64b2efa66245b1589e1254a3ee3847d05cf4fb16..156d38440112e33f434a850f56557fed9c0cdd44 100644 (file)
--- a/target/linux/adm5120/config-3.3
+++ b/target/linux/adm5120/config-3.3
@@ -43,7 +43,7 @@ CONFIG_ATA=m
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_CEVT_R4K=y
 CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=squashfs,jffs2"
 CONFIG_CMDLINE_BOOL=y
 # CONFIG_CMDLINE_OVERRIDE is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -167,7 +167,6 @@ CONFIG_SCSI_MOD=m
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
-CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
 # CONFIG_SERIAL_AMBA_PL011 is not set
 CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y

diff --git a/target/linux/adm5120/files/arch/mips/adm5120/motorola/pmugw.c b/target/linux/adm5120/files/arch/mips/adm5120/motorola/pmugw.c
index a706e573c1e36a73284a9e81b3efd74f42ced23f..369892fd13bb7dc088b248084c1354ae653c85a9 100644 (file)
--- a/target/linux/adm5120/files/arch/mips/adm5120/motorola/pmugw.c
+++ b/target/linux/adm5120/files/arch/mips/adm5120/motorola/pmugw.c
@@ -83,8 +83,8 @@ void __init pmugw_setup(void)
        adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions);
        adm5120_flash0_data.parts = pmugw_partitions;
 
-       adm5120_add_device_uart(1); /* ttyS0 */
-       adm5120_add_device_uart(0); /* ttyS1 */
+       adm5120_add_device_uart(1); /* ttyAM0 */
+       adm5120_add_device_uart(0); /* ttyAM1 */
 
        adm5120_add_device_flash(0);
 

diff --git a/target/linux/adm5120/patches-3.3/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-3.3/200-amba_pl010_hacks.patch
index 3c4ea35a1d4d794fe38440bd0fd72b4eb0d0b728..64e7d2ac535802e7c05bb489787e66b57221e6d8 100644 (file)
--- a/target/linux/adm5120/patches-3.3/200-amba_pl010_hacks.patch
+++ b/target/linux/adm5120/patches-3.3/200-amba_pl010_hacks.patch
@@ -1,6 +1,6 @@
 --- a/drivers/tty/serial/amba-pl010.c
 +++ b/drivers/tty/serial/amba-pl010.c
-@@ -49,11 +49,10 @@
+@@ -49,11 +49,9 @@
  
  #include <asm/io.h>
  
@@ -10,11 +10,10 @@
  #define SERIAL_AMBA_MINOR     16
 -#define SERIAL_AMBA_NR                UART_NR
 +#define SERIAL_AMBA_NR                CONFIG_SERIAL_AMBA_PL010_NUMPORTS
-+#define SERIAL_AMBA_NAME      CONFIG_SERIAL_AMBA_PL010_PORTNAME
  
  #define AMBA_ISR_PASS_LIMIT   256
  
-@@ -79,9 +78,9 @@ static void pl010_stop_tx(struct uart_po
+@@ -79,9 +77,9 @@ static void pl010_stop_tx(struct uart_po
        struct uart_amba_port *uap = (struct uart_amba_port *)port;
        unsigned int cr;
  
@@ -26,7 +25,7 @@
  }
  
  static void pl010_start_tx(struct uart_port *port)
-@@ -89,9 +88,9 @@ static void pl010_start_tx(struct uart_p
+@@ -89,9 +87,9 @@ static void pl010_start_tx(struct uart_p
        struct uart_amba_port *uap = (struct uart_amba_port *)port;
        unsigned int cr;
  
@@ -38,7 +37,7 @@
  }
  
  static void pl010_stop_rx(struct uart_port *port)
-@@ -99,9 +98,9 @@ static void pl010_stop_rx(struct uart_po
+@@ -99,9 +97,9 @@ static void pl010_stop_rx(struct uart_po
        struct uart_amba_port *uap = (struct uart_amba_port *)port;
        unsigned int cr;
  
@@ -50,7 +49,7 @@
  }
  
  static void pl010_enable_ms(struct uart_port *port)
-@@ -109,9 +108,9 @@ static void pl010_enable_ms(struct uart_
+@@ -109,9 +107,9 @@ static void pl010_enable_ms(struct uart_
        struct uart_amba_port *uap = (struct uart_amba_port *)port;
        unsigned int cr;
  
@@ -62,7 +61,7 @@
  }
  
  static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -119,9 +118,9 @@ static void pl010_rx_chars(struct uart_a
+@@ -119,9 +117,9 @@ static void pl010_rx_chars(struct uart_a
        struct tty_struct *tty = uap->port.state->port.tty;
        unsigned int status, ch, flag, rsr, max_count = 256;
  
@@ -74,7 +73,7 @@
                flag = TTY_NORMAL;
  
                uap->port.icount.rx++;
-@@ -130,9 +129,9 @@ static void pl010_rx_chars(struct uart_a
+@@ -130,9 +128,9 @@ static void pl010_rx_chars(struct uart_a
                 * Note that the error handling code is
                 * out of the main execution path
                 */
@@ -86,7 +85,7 @@
  
                        if (rsr & UART01x_RSR_BE) {
                                rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -162,7 +161,7 @@ static void pl010_rx_chars(struct uart_a
+@@ -162,7 +160,7 @@ static void pl010_rx_chars(struct uart_a
                uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
  
        ignore_char:
@@ -95,7 +94,7 @@
        }
        spin_unlock(&uap->port.lock);
        tty_flip_buffer_push(tty);
-@@ -175,7 +174,7 @@ static void pl010_tx_chars(struct uart_a
+@@ -175,7 +173,7 @@ static void pl010_tx_chars(struct uart_a
        int count;
  
        if (uap->port.x_char) {
@@ -104,7 +103,7 @@
                uap->port.icount.tx++;
                uap->port.x_char = 0;
                return;
-@@ -187,7 +186,7 @@ static void pl010_tx_chars(struct uart_a
+@@ -187,7 +185,7 @@ static void pl010_tx_chars(struct uart_a
  
        count = uap->port.fifosize >> 1;
        do {
@@ -113,7 +112,7 @@
                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
                uap->port.icount.tx++;
                if (uart_circ_empty(xmit))
-@@ -205,9 +204,9 @@ static void pl010_modem_status(struct ua
+@@ -205,9 +203,9 @@ static void pl010_modem_status(struct ua
  {
        unsigned int status, delta;
  
@@ -125,7 +124,7 @@
  
        delta = status ^ uap->old_status;
        uap->old_status = status;
-@@ -235,7 +234,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -235,7 +233,7 @@ static irqreturn_t pl010_int(int irq, vo
  
        spin_lock(&uap->port.lock);
  
@@ -134,7 +133,7 @@
        if (status) {
                do {
                        if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -248,7 +247,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -248,7 +246,7 @@ static irqreturn_t pl010_int(int irq, vo
                        if (pass_counter-- == 0)
                                break;
  
@@ -143,7 +142,7 @@
                } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
                                   UART010_IIR_TIS));
                handled = 1;
-@@ -262,7 +261,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -262,7 +260,7 @@ static irqreturn_t pl010_int(int irq, vo
  static unsigned int pl010_tx_empty(struct uart_port *port)
  {
        struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -152,7 +151,7 @@
        return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
  }
  
-@@ -272,7 +271,7 @@ static unsigned int pl010_get_mctrl(stru
+@@ -272,7 +270,7 @@ static unsigned int pl010_get_mctrl(stru
        unsigned int result = 0;
        unsigned int status;
  
@@ -161,7 +160,7 @@
        if (status & UART01x_FR_DCD)
                result |= TIOCM_CAR;
        if (status & UART01x_FR_DSR)
-@@ -298,12 +297,12 @@ static void pl010_break_ctl(struct uart_
+@@ -298,12 +296,12 @@ static void pl010_break_ctl(struct uart_
        unsigned int lcr_h;
  
        spin_lock_irqsave(&uap->port.lock, flags);
@@ -176,7 +175,7 @@
        spin_unlock_irqrestore(&uap->port.lock, flags);
  }
  
-@@ -335,12 +334,12 @@ static int pl010_startup(struct uart_por
+@@ -335,12 +333,12 @@ static int pl010_startup(struct uart_por
        /*
         * initialise the old status of the modem signals
         */
@@ -191,7 +190,7 @@
               uap->port.membase + UART010_CR);
  
        return 0;
-@@ -365,10 +364,10 @@ static void pl010_shutdown(struct uart_p
+@@ -365,10 +363,10 @@ static void pl010_shutdown(struct uart_p
        /*
         * disable all interrupts, disable the port
         */
@@ -204,7 +203,7 @@
                ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
               uap->port.membase + UART010_LCRH);
  
-@@ -391,7 +390,7 @@ pl010_set_termios(struct uart_port *port
+@@ -391,7 +389,7 @@ pl010_set_termios(struct uart_port *port
        /*
         * Ask the core to calculate the divisor for us.
         */
@@ -213,7 +212,7 @@
        quot = uart_get_divisor(port, baud);
  
        switch (termios->c_cflag & CSIZE) {
-@@ -454,25 +453,25 @@ pl010_set_termios(struct uart_port *port
+@@ -454,25 +452,25 @@ pl010_set_termios(struct uart_port *port
                uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
  
        /* first, disable everything */
@@ -245,7 +244,7 @@
  
        spin_unlock_irqrestore(&uap->port.lock, flags);
  }
-@@ -554,7 +553,7 @@ static struct uart_ops amba_pl010_pops =
+@@ -554,7 +552,7 @@ static struct uart_ops amba_pl010_pops =
        .verify_port    = pl010_verify_port,
  };
  
@@ -254,7 +253,7 @@
  
  #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
  
-@@ -564,10 +563,10 @@ static void pl010_console_putchar(struct
+@@ -564,10 +562,10 @@ static void pl010_console_putchar(struct
        unsigned int status;
  
        do {
@@ -267,7 +266,7 @@
  }
  
  static void
-@@ -581,8 +580,8 @@ pl010_console_write(struct console *co,
+@@ -581,8 +579,8 @@ pl010_console_write(struct console *co,
        /*
         *      First save the CR then disable the interrupts
         */
@@ -278,7 +277,7 @@
  
        uart_console_write(&uap->port, s, count, pl010_console_putchar);
  
-@@ -591,10 +590,10 @@ pl010_console_write(struct console *co,
+@@ -591,10 +589,10 @@ pl010_console_write(struct console *co,
         *      and restore the TCR
         */
        do {
@@ -291,7 +290,7 @@
  
        clk_disable(uap->clk);
  }
-@@ -603,9 +602,9 @@ static void __init
+@@ -603,9 +601,9 @@ static void __init
  pl010_console_get_options(struct uart_amba_port *uap, int *baud,
                             int *parity, int *bits)
  {
@@ -303,7 +302,7 @@
  
                *parity = 'n';
                if (lcr_h & UART01x_LCRH_PEN) {
-@@ -620,8 +619,8 @@ pl010_console_get_options(struct uart_am
+@@ -620,8 +618,8 @@ pl010_console_get_options(struct uart_am
                else
                        *bits = 8;
  
@@ -314,7 +313,7 @@
                *baud = uap->port.uartclk / (16 * (quot + 1));
        }
  }
-@@ -640,7 +639,7 @@ static int __init pl010_console_setup(st
+@@ -640,7 +638,7 @@ static int __init pl010_console_setup(st
         * if so, search for the first available port that does have
         * console support.
         */
@@ -323,23 +322,8 @@
                co->index = 0;
        uap = amba_ports[co->index];
        if (!uap)
-@@ -662,7 +661,7 @@ static int __init pl010_console_setup(st
- 
- static struct uart_driver amba_reg;
- static struct console amba_console = {
--      .name           = "ttyAM",
-+      .name           = SERIAL_AMBA_NAME,
-       .write          = pl010_console_write,
-       .device         = uart_console_device,
-       .setup          = pl010_console_setup,
-@@ -678,11 +677,11 @@ static struct console amba_console = {
- 
- static struct uart_driver amba_reg = {
-       .owner                  = THIS_MODULE,
--      .driver_name            = "ttyAM",
--      .dev_name               = "ttyAM",
-+      .driver_name            = SERIAL_AMBA_NAME,
-+      .dev_name               = SERIAL_AMBA_NAME,
+@@ -682,7 +680,7 @@ static struct uart_driver amba_reg = {
+       .dev_name               = "ttyAM",
        .major                  = SERIAL_AMBA_MAJOR,
        .minor                  = SERIAL_AMBA_MINOR,
 -      .nr                     = UART_NR,
@@ -349,7 +333,7 @@
  
 --- a/drivers/tty/serial/Kconfig
 +++ b/drivers/tty/serial/Kconfig
-@@ -16,10 +16,25 @@ config SERIAL_AMBA_PL010
+@@ -16,10 +16,18 @@ config SERIAL_AMBA_PL010
        help
          This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
          an Integrator/AP or Integrator/PP2 platform, or if you have a
@@ -365,13 +349,6 @@
 +      ---help---
 +        Set this to the number of serial ports you want the AMBA PL010 driver
 +        to support.
-+
-+config SERIAL_AMBA_PL010_PORTNAME
-+      string "Name of the AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "ttyAM"
-+      ---help---
-+        ::: To be written :::
 +
  config SERIAL_AMBA_PL010_CONSOLE
        bool "Support for console on AMBA serial port"

diff --git a/target/linux/adm5120/rb1xx/config-3.3 b/target/linux/adm5120/rb1xx/config-3.3
index fc173cc214e6ad562b8b6a5fae90c9102d60ce5d..69c545c504b8b1b46173164e1daccbef914d2773 100644 (file)
--- a/target/linux/adm5120/rb1xx/config-3.3
+++ b/target/linux/adm5120/rb1xx/config-3.3
@@ -27,7 +27,7 @@ CONFIG_ADM5120_MACH_RB_192=y
 CONFIG_ADM5120_OEM_MIKROTIK=y
 # CONFIG_ADM5120_OEM_MOTOROLA is not set
 # CONFIG_ADM5120_OEM_OSBRIDGE is not set
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=yaffs2"
+CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=yaffs2"
 # CONFIG_JFFS2_FS is not set
 # CONFIG_MTD_MYLOADER_PARTS is not set
 CONFIG_MTD_NAND=y