Factor out the code we use to actually write a tlb entry.
set_tlb is a logical view of the TLB while write_tlb is a low level
matching the MAS registers.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
/*
- * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright 2004, 2007-2009 Freescale Semiconductor.
* Copyright (C) 2003 Motorola,Inc.
*
* See file CREDITS for list of people who contributed to this
/*------------------------------------------------------------------------------*/
+/*
+ * void write_tlb(mas0, mas1, mas2, mas3, mas7)
+ */
+ .globl write_tlb
+write_tlb:
+ mtspr MAS0,r3
+ mtspr MAS1,r4
+ mtspr MAS2,r5
+ mtspr MAS3,r6
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+ mtspr MAS7,r7
+#endif
+ li r3,0
+#ifdef CONFIG_SYS_BOOK3E_HV
+ mtspr MAS8,r3
+#endif
+ isync
+ tlbwe
+ msync
+ isync
+ blr
+
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
/*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
_mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
_mas2 = FSL_BOOKE_MAS2(epn, wimge);
_mas3 = FSL_BOOKE_MAS3(rpn, 0, perms);
- _mas7 = rpn >> 32;
+ _mas7 = FSL_BOOKE_MAS7(rpn);
- mtspr(MAS0, _mas0);
- mtspr(MAS1, _mas1);
- mtspr(MAS2, _mas2);
- mtspr(MAS3, _mas3);
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- mtspr(MAS7, _mas7);
-#endif
-#ifdef CONFIG_SYS_BOOK3E_HV
- mtspr(MAS8, 0);
-#endif
- asm volatile("isync;msync;tlbwe;isync");
+ write_tlb(_mas0, _mas1, _mas2, _mas3, _mas7);
#ifdef CONFIG_ADDR_MAP
if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
(((epn) & MAS3_RPN) | (wimge))
#define FSL_BOOKE_MAS3(rpn, user, perms) \
(((rpn) & MAS3_RPN) | (user) | (perms))
+#define FSL_BOOKE_MAS7(rpn) \
+ (((u64)(rpn)) >> 32)
#define BOOKE_PAGESZ_1K 0
#define BOOKE_PAGESZ_4K 1
extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
+extern void write_tlb(u32 _mas0, u32 _mas1, u32 _mas2, u32 _mas3, u32 _mas7);
+
#define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \
{ .tlb = _tlb, .epn = _epn, .rpn = _rpn, .perms = _perms, \
.wimge = _wimge, .ts = _ts, .esel = _esel, .tsize = _sz, .iprot = _iprot }