mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY

It has turned out that the sdhci-tegra controller requires the R1B response,
for commands that has this response associated with them. So, converting
from an R1B to an R1 response for a CMD6 for example, leads to problems
with the HW busy detection support.

Fix this by informing the mmc core about the requirement, via setting the
host cap, MMC_CAP_NEED_RSP_BUSY.

Reported-by: Bitan Biswas <bbiswas@nvidia.com>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: <stable@vger.kernel.org>
Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Tested-By: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 403ac44a737822cbd754021ad644164ea6e0dc79..a25c3a4d3f6cbb9dfd1d9d65607e31f102011fdb 100644 (file)
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -1552,6 +1552,9 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
        if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
                host->mmc->caps |= MMC_CAP_1_8V_DDR;
 
+       /* R1B responses is required to properly manage HW busy detection. */
+       host->mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
+
        tegra_sdhci_parse_dt(host);
 
        tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",