This patch set supports exynos display port drivers.
DisplayPort is an industry standard device to accommodate the increasing board
adoption of digital display technology within the PC and consumer electronics.
The interface supports internal chip-to-chip and external box-to-box digital
display connections.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
--- /dev/null
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DP_H_
+#define __ASM_ARM_ARCH_DP_H_
+
+#ifndef __ASSEMBLY__
+
+struct exynos_dp {
+ unsigned char res1[0x10];
+ unsigned int tx_version;
+ unsigned int tx_sw_reset;
+ unsigned int func_en1;
+ unsigned int func_en2;
+ unsigned int video_ctl1;
+ unsigned int video_ctl2;
+ unsigned int video_ctl3;
+ unsigned int video_ctl4;
+ unsigned int color_blue_cb;
+ unsigned int color_green_y;
+ unsigned int color_red_cr;
+ unsigned int video_ctl8;
+ unsigned char res2[0x4];
+ unsigned int video_ctl10;
+ unsigned int total_ln_cfg_l;
+ unsigned int total_ln_cfg_h;
+ unsigned int active_ln_cfg_l;
+ unsigned int active_ln_cfg_h;
+ unsigned int vfp_cfg;
+ unsigned int vsw_cfg;
+ unsigned int vbp_cfg;
+ unsigned int total_pix_cfg_l;
+ unsigned int total_pix_cfg_h;
+ unsigned int active_pix_cfg_l;
+ unsigned int active_pix_cfg_h;
+ unsigned int hfp_cfg_l;
+ unsigned int hfp_cfg_h;
+ unsigned int hsw_cfg_l;
+ unsigned int hsw_cfg_h;
+ unsigned int hbp_cfg_l;
+ unsigned int hbp_cfg_h;
+ unsigned int video_status;
+ unsigned int total_ln_sta_l;
+ unsigned int total_ln_sta_h;
+ unsigned int active_ln_sta_l;
+ unsigned int active_ln_sta_h;
+
+ unsigned int vfp_sta;
+ unsigned int vsw_sta;
+ unsigned int vbp_sta;
+
+ unsigned int total_pix_sta_l;
+ unsigned int total_pix_sta_h;
+ unsigned int active_pix_sta_l;
+ unsigned int active_pix_sta_h;
+
+ unsigned int hfp_sta_l;
+ unsigned int hfp_sta_h;
+ unsigned int hsw_sta_l;
+ unsigned int hsw_sta_h;
+ unsigned int hbp_sta_l;
+ unsigned int hbp_sta_h;
+
+ unsigned char res3[0x288];
+
+ unsigned int lane_map;
+ unsigned char res4[0x10];
+ unsigned int analog_ctl1;
+ unsigned int analog_ctl2;
+ unsigned int analog_ctl3;
+
+ unsigned int pll_filter_ctl1;
+ unsigned int amp_tuning_ctl;
+ unsigned char res5[0xc];
+
+ unsigned int aux_hw_retry_ctl;
+ unsigned char res6[0x2c];
+ unsigned int int_state;
+ unsigned int common_int_sta1;
+ unsigned int common_int_sta2;
+ unsigned int common_int_sta3;
+ unsigned int common_int_sta4;
+ unsigned char res7[0x8];
+
+ unsigned int int_sta;
+ unsigned char res8[0x1c];
+ unsigned int int_ctl;
+ unsigned char res9[0x200];
+ unsigned int sys_ctl1;
+ unsigned int sys_ctl2;
+ unsigned int sys_ctl3;
+ unsigned int sys_ctl4;
+ unsigned int vid_ctl;
+ unsigned char res10[0x2c];
+ unsigned int pkt_send_ctl;
+ unsigned char res[0x4];
+ unsigned int hdcp_ctl;
+ unsigned char res11[0x34];
+ unsigned int link_bw_set;
+
+ unsigned int lane_count_set;
+ unsigned int training_ptn_set;
+ unsigned int ln0_link_training_ctl;
+ unsigned int ln1_link_training_ctl;
+ unsigned int ln2_link_training_ctl;
+ unsigned int ln3_link_training_ctl;
+ unsigned int dn_spread_ctl;
+ unsigned int hw_link_training_ctl;
+ unsigned char res12[0x1c];
+
+ unsigned int debug_ctl;
+ unsigned int hpd_deglitch_l;
+ unsigned int hpd_deglitch_h;
+
+ unsigned char res13[0x14];
+ unsigned int link_debug_ctl;
+
+ unsigned char res14[0x1c];
+
+ unsigned int m_vid0;
+ unsigned int m_vid1;
+ unsigned int m_vid2;
+ unsigned int n_vid0;
+ unsigned int n_vid1;
+ unsigned int n_vid2;
+ unsigned int m_vid_mon;
+ unsigned int pll_ctl;
+ unsigned int phy_pd;
+ unsigned int phy_test;
+ unsigned char res15[0x8];
+
+ unsigned int video_fifo_thrd;
+ unsigned char res16[0x8];
+ unsigned int audio_margin;
+
+ unsigned int dn_spread_ctl1;
+ unsigned int dn_spread_ctl2;
+ unsigned char res17[0x18];
+ unsigned int m_cal_ctl;
+ unsigned int m_vid_gen_filter_th;
+ unsigned char res18[0x10];
+ unsigned int m_aud_gen_filter_th;
+ unsigned char res50[0x4];
+
+ unsigned int aux_ch_sta;
+ unsigned int aux_err_num;
+ unsigned int aux_ch_defer_ctl;
+ unsigned int aux_rx_comm;
+ unsigned int buffer_data_ctl;
+
+ unsigned int aux_ch_ctl1;
+ unsigned int aux_addr_7_0;
+ unsigned int aux_addr_15_8;
+ unsigned int aux_addr_19_16;
+ unsigned int aux_ch_ctl2;
+ unsigned char res19[0x18];
+ unsigned int buf_data0;
+ unsigned char res20[0x3c];
+
+ unsigned int soc_general_ctl;
+ unsigned char res21[0x8c];
+ unsigned int crc_con;
+ unsigned int crc_result;
+ unsigned char res22[0x8];
+
+ unsigned int common_int_mask1;
+ unsigned int common_int_mask2;
+ unsigned int common_int_mask3;
+ unsigned int common_int_mask4;
+ unsigned int int_sta_mask1;
+ unsigned int int_sta_mask2;
+ unsigned int int_sta_mask3;
+ unsigned int int_sta_mask4;
+ unsigned int int_sta_mask;
+ unsigned int crc_result2;
+ unsigned int scrambler_reset_cnt;
+
+ unsigned int pn_inv;
+ unsigned int psr_config;
+ unsigned int psr_command0;
+ unsigned int psr_command1;
+ unsigned int psr_crc_mon0;
+ unsigned int psr_crc_mon1;
+
+ unsigned char res24[0x30];
+ unsigned int phy_bist_ctrl;
+ unsigned char res25[0xc];
+ unsigned int phy_ctrl;
+ unsigned char res26[0x1c];
+ unsigned int test_pattern_gen_en;
+ unsigned int test_pattern_gen_ctrl;
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* For DP VIDEO CTL 1 */
+#define VIDEO_EN_MASK (0x01 << 7)
+#define VIDEO_MUTE_MASK (0x01 << 6)
+
+/* For DP VIDEO CTL 4 */
+#define VIDEO_BIST_MASK (0x1 << 3)
+
+/* EXYNOS_DP_ANALOG_CTL_1 */
+#define SEL_BG_NEW_BANDGAP (0x0 << 6)
+#define SEL_BG_INTERNAL_RESISTOR (0x1 << 6)
+#define TX_TERMINAL_CTRL_73_OHM (0x0 << 4)
+#define TX_TERMINAL_CTRL_61_OHM (0x1 << 4)
+#define TX_TERMINAL_CTRL_50_OHM (0x2 << 4)
+#define TX_TERMINAL_CTRL_45_OHM (0x3 << 4)
+#define SWING_A_30PER_G_INCREASE (0x1 << 3)
+#define SWING_A_30PER_G_NORMAL (0x0 << 3)
+
+/* EXYNOS_DP_ANALOG_CTL_2 */
+#define CPREG_BLEED (0x1 << 4)
+#define SEL_24M (0x1 << 3)
+#define TX_DVDD_BIT_1_0000V (0x3 << 0)
+#define TX_DVDD_BIT_1_0625V (0x4 << 0)
+#define TX_DVDD_BIT_1_1250V (0x5 << 0)
+
+/* EXYNOS_DP_ANALOG_CTL_3 */
+#define DRIVE_DVDD_BIT_1_0000V (0x3 << 5)
+#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5)
+#define DRIVE_DVDD_BIT_1_1250V (0x5 << 5)
+#define SEL_CURRENT_DEFAULT (0x0 << 3)
+#define VCO_BIT_000_MICRO (0x0 << 0)
+#define VCO_BIT_200_MICRO (0x1 << 0)
+#define VCO_BIT_300_MICRO (0x2 << 0)
+#define VCO_BIT_400_MICRO (0x3 << 0)
+#define VCO_BIT_500_MICRO (0x4 << 0)
+#define VCO_BIT_600_MICRO (0x5 << 0)
+#define VCO_BIT_700_MICRO (0x6 << 0)
+#define VCO_BIT_900_MICRO (0x7 << 0)
+
+/* EXYNOS_DP_PLL_FILTER_CTL_1 */
+#define PD_RING_OSC (0x1 << 6)
+#define AUX_TERMINAL_CTRL_52_OHM (0x3 << 4)
+#define AUX_TERMINAL_CTRL_69_OHM (0x2 << 4)
+#define AUX_TERMINAL_CTRL_102_OHM (0x1 << 4)
+#define AUX_TERMINAL_CTRL_200_OHM (0x0 << 4)
+#define TX_CUR1_1X (0x0 << 2)
+#define TX_CUR1_2X (0x1 << 2)
+#define TX_CUR1_3X (0x2 << 2)
+#define TX_CUR_1_MA (0x0 << 0)
+#define TX_CUR_2_MA (0x1 << 0)
+#define TX_CUR_3_MA (0x2 << 0)
+#define TX_CUR_4_MA (0x3 << 0)
+
+/* EXYNOS_DP_PLL_FILTER_CTL_2 */
+#define CH3_AMP_0_MV (0x3 << 12)
+#define CH2_AMP_0_MV (0x3 << 8)
+#define CH1_AMP_0_MV (0x3 << 4)
+#define CH0_AMP_0_MV (0x3 << 0)
+
+/* EXYNOS_DP_PLL_CTL */
+#define DP_PLL_PD (0x1 << 7)
+#define DP_PLL_RESET (0x1 << 6)
+#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4)
+#define DP_PLL_REF_BIT_1_1250V (0x5 << 0)
+#define DP_PLL_REF_BIT_1_2500V (0x7 << 0)
+
+/* EXYNOS_DP_INT_CTL */
+#define SOFT_INT_CTRL (0x1 << 2)
+#define INT_POL (0x1 << 0)
+
+/* DP TX SW RESET */
+#define RESET_DP_TX (0x01 << 0)
+
+/* DP FUNC_EN_1 */
+#define MASTER_VID_FUNC_EN_N (0x1 << 7)
+#define SLAVE_VID_FUNC_EN_N (0x1 << 5)
+#define AUD_FIFO_FUNC_EN_N (0x1 << 4)
+#define AUD_FUNC_EN_N (0x1 << 3)
+#define HDCP_FUNC_EN_N (0x1 << 2)
+#define CRC_FUNC_EN_N (0x1 << 1)
+#define SW_FUNC_EN_N (0x1 << 0)
+
+/* DP FUNC_EN_2 */
+#define SSC_FUNC_EN_N (0x1 << 7)
+#define AUX_FUNC_EN_N (0x1 << 2)
+#define SERDES_FIFO_FUNC_EN_N (0x1 << 1)
+#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0)
+
+/* EXYNOS_DP_PHY_PD */
+#define PHY_PD (0x1 << 5)
+#define AUX_PD (0x1 << 4)
+#define CH3_PD (0x1 << 3)
+#define CH2_PD (0x1 << 2)
+#define CH1_PD (0x1 << 1)
+#define CH0_PD (0x1 << 0)
+
+/* EXYNOS_DP_COMMON_INT_STA_1 */
+#define VSYNC_DET (0x1 << 7)
+#define PLL_LOCK_CHG (0x1 << 6)
+#define SPDIF_ERR (0x1 << 5)
+#define SPDIF_UNSTBL (0x1 << 4)
+#define VID_FORMAT_CHG (0x1 << 3)
+#define AUD_CLK_CHG (0x1 << 2)
+#define VID_CLK_CHG (0x1 << 1)
+#define SW_INT (0x1 << 0)
+
+/* EXYNOS_DP_DEBUG_CTL */
+#define PLL_LOCK (0x1 << 4)
+#define F_PLL_LOCK (0x1 << 3)
+#define PLL_LOCK_CTRL (0x1 << 2)
+
+/* EXYNOS_DP_FUNC_EN_2 */
+#define SSC_FUNC_EN_N (0x1 << 7)
+#define AUX_FUNC_EN_N (0x1 << 2)
+#define SERDES_FIFO_FUNC_EN_N (0x1 << 1)
+#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0)
+
+/* EXYNOS_DP_COMMON_INT_STA_4 */
+#define PSR_ACTIVE (0x1 << 7)
+#define PSR_INACTIVE (0x1 << 6)
+#define SPDIF_BI_PHASE_ERR (0x1 << 5)
+#define HOTPLUG_CHG (0x1 << 2)
+#define HPD_LOST (0x1 << 1)
+#define PLUG (0x1 << 0)
+
+/* EXYNOS_DP_INT_STA */
+#define INT_HPD (0x1 << 6)
+#define HW_TRAINING_FINISH (0x1 << 5)
+#define RPLY_RECEIV (0x1 << 1)
+#define AUX_ERR (0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_3 */
+#define HPD_STATUS (0x1 << 6)
+#define F_HPD (0x1 << 5)
+#define HPD_CTRL (0x1 << 4)
+#define HDCP_RDY (0x1 << 3)
+#define STRM_VALID (0x1 << 2)
+#define F_VALID (0x1 << 1)
+#define VALID_CTRL (0x1 << 0)
+
+/* EXYNOS_DP_AUX_HW_RETRY_CTL */
+#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8)
+#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3)
+#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3)
+#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS (0x1 << 3)
+#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS (0x2 << 3)
+#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3)
+#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0)
+
+/* EXYNOS_DP_AUX_CH_DEFER_CTL */
+#define DEFER_CTRL_EN (0x1 << 7)
+#define DEFER_COUNT(x) (((x) & 0x7f) << 0)
+
+#define COMMON_INT_MASK_1 (0)
+#define COMMON_INT_MASK_2 (0)
+#define COMMON_INT_MASK_3 (0)
+#define COMMON_INT_MASK_4 (0)
+#define INT_STA_MASK (0)
+
+/* EXYNOS_DP_BUFFER_DATA_CTL */
+#define BUF_CLR (0x1 << 7)
+#define BUF_DATA_COUNT(x) (((x) & 0x1f) << 0)
+
+/* EXYNOS_DP_AUX_ADDR_7_0 */
+#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff)
+
+/* EXYNOS_DP_AUX_ADDR_15_8 */
+#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff)
+
+/* EXYNOS_DP_AUX_ADDR_19_16 */
+#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f)
+
+/* EXYNOS_DP_AUX_CH_CTL_1 */
+#define AUX_LENGTH(x) (((x - 1) & 0xf) << 4)
+#define AUX_TX_COMM_MASK (0xf << 0)
+#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3)
+#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3)
+#define AUX_TX_COMM_MOT (0x1 << 2)
+#define AUX_TX_COMM_WRITE (0x0 << 0)
+#define AUX_TX_COMM_READ (0x1 << 0)
+
+/* EXYNOS_DP_AUX_CH_CTL_2 */
+#define ADDR_ONLY (0x1 << 1)
+#define AUX_EN (0x1 << 0)
+
+/* EXYNOS_DP_AUX_CH_STA */
+#define AUX_BUSY (0x1 << 4)
+#define AUX_STATUS_MASK (0xf << 0)
+
+/* EXYNOS_DP_AUX_RX_COMM */
+#define AUX_RX_COMM_I2C_DEFER (0x2 << 2)
+#define AUX_RX_COMM_AUX_DEFER (0x2 << 0)
+
+/* EXYNOS_DP_PHY_TEST */
+#define MACRO_RST (0x1 << 5)
+#define CH1_TEST (0x1 << 1)
+#define CH0_TEST (0x1 << 0)
+
+/* EXYNOS_DP_TRAINING_PTN_SET */
+#define SCRAMBLER_TYPE (0x1 << 9)
+#define HW_LINK_TRAINING_PATTERN (0x1 << 8)
+#define SCRAMBLING_DISABLE (0x1 << 5)
+#define SCRAMBLING_ENABLE (0x0 << 5)
+#define LINK_QUAL_PATTERN_SET_MASK (0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2)
+#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2)
+#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0)
+#define SW_TRAINING_PATTERN_SET_NORMAL (0x0 << 0)
+
+/* EXYNOS_DP_TOTAL_LINE_CFG */
+#define TOTAL_LINE_CFG_L(x) ((x) & 0xff)
+#define TOTAL_LINE_CFG_H(x) ((((x) >> 8)) & 0xff)
+#define ACTIVE_LINE_CFG_L(x) ((x) & 0xff)
+#define ACTIVE_LINE_CFG_H(x) (((x) >> 8) & 0xff)
+#define TOTAL_PIXEL_CFG_L(x) ((x) & 0xff)
+#define TOTAL_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff)
+#define ACTIVE_PIXEL_CFG_L(x) ((x) & 0xff)
+#define ACTIVE_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff)
+
+#define H_F_PORCH_CFG_L(x) ((x) & 0xff)
+#define H_F_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff)
+#define H_SYNC_PORCH_CFG_L(x) ((x) & 0xff)
+#define H_SYNC_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff)
+#define H_B_PORCH_CFG_L(x) ((x) & 0xff)
+#define H_B_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff)
+
+/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */
+#define MAX_PRE_EMPHASIS_REACH_0 (0x1 << 5)
+#define PRE_EMPHASIS_SET_0_SET(x) (((x) & 0x3) << 3)
+#define PRE_EMPHASIS_SET_0_GET(x) (((x) >> 3) & 0x3)
+#define PRE_EMPHASIS_SET_0_MASK (0x3 << 3)
+#define PRE_EMPHASIS_SET_0_SHIFT (3)
+#define PRE_EMPHASIS_SET_0_LEVEL_3 (0x3 << 3)
+#define PRE_EMPHASIS_SET_0_LEVEL_2 (0x2 << 3)
+#define PRE_EMPHASIS_SET_0_LEVEL_1 (0x1 << 3)
+#define PRE_EMPHASIS_SET_0_LEVEL_0 (0x0 << 3)
+#define MAX_DRIVE_CURRENT_REACH_0 (0x1 << 2)
+#define DRIVE_CURRENT_SET_0_MASK (0x3 << 0)
+#define DRIVE_CURRENT_SET_0_SET(x) (((x) & 0x3) << 0)
+#define DRIVE_CURRENT_SET_0_GET(x) (((x) >> 0) & 0x3)
+#define DRIVE_CURRENT_SET_0_LEVEL_3 (0x3 << 0)
+#define DRIVE_CURRENT_SET_0_LEVEL_2 (0x2 << 0)
+#define DRIVE_CURRENT_SET_0_LEVEL_1 (0x1 << 0)
+#define DRIVE_CURRENT_SET_0_LEVEL_0 (0x0 << 0)
+
+/* EXYNOS_DP_LN1_LINK_TRAINING_CTL */
+#define MAX_PRE_EMPHASIS_REACH_1 (0x1 << 5)
+#define PRE_EMPHASIS_SET_1_SET(x) (((x) & 0x3) << 3)
+#define PRE_EMPHASIS_SET_1_GET(x) (((x) >> 3) & 0x3)
+#define PRE_EMPHASIS_SET_1_MASK (0x3 << 3)
+#define PRE_EMPHASIS_SET_1_SHIFT (3)
+#define PRE_EMPHASIS_SET_1_LEVEL_3 (0x3 << 3)
+#define PRE_EMPHASIS_SET_1_LEVEL_2 (0x2 << 3)
+#define PRE_EMPHASIS_SET_1_LEVEL_1 (0x1 << 3)
+#define PRE_EMPHASIS_SET_1_LEVEL_0 (0x0 << 3)
+#define MAX_DRIVE_CURRENT_REACH_1 (0x1 << 2)
+#define DRIVE_CURRENT_SET_1_MASK (0x3 << 0)
+#define DRIVE_CURRENT_SET_1_SET(x) (((x) & 0x3) << 0)
+#define DRIVE_CURRENT_SET_1_GET(x) (((x) >> 0) & 0x3)
+#define DRIVE_CURRENT_SET_1_LEVEL_3 (0x3 << 0)
+#define DRIVE_CURRENT_SET_1_LEVEL_2 (0x2 << 0)
+#define DRIVE_CURRENT_SET_1_LEVEL_1 (0x1 << 0)
+#define DRIVE_CURRENT_SET_1_LEVEL_0 (0x0 << 0)
+
+/* EXYNOS_DP_LN2_LINK_TRAINING_CTL */
+#define MAX_PRE_EMPHASIS_REACH_2 (0x1 << 5)
+#define PRE_EMPHASIS_SET_2_SET(x) (((x) & 0x3) << 3)
+#define PRE_EMPHASIS_SET_2_GET(x) (((x) >> 3) & 0x3)
+#define PRE_EMPHASIS_SET_2_MASK (0x3 << 3)
+#define PRE_EMPHASIS_SET_2_SHIFT (3)
+#define PRE_EMPHASIS_SET_2_LEVEL_3 (0x3 << 3)
+#define PRE_EMPHASIS_SET_2_LEVEL_2 (0x2 << 3)
+#define PRE_EMPHASIS_SET_2_LEVEL_1 (0x1 << 3)
+#define PRE_EMPHASIS_SET_2_LEVEL_0 (0x0 << 3)
+#define MAX_DRIVE_CURRENT_REACH_2 (0x1 << 2)
+#define DRIVE_CURRENT_SET_2_MASK (0x3 << 0)
+#define DRIVE_CURRENT_SET_2_SET(x) (((x) & 0x3) << 0)
+#define DRIVE_CURRENT_SET_2_GET(x) (((x) >> 0) & 0x3)
+#define DRIVE_CURRENT_SET_2_LEVEL_3 (0x3 << 0)
+#define DRIVE_CURRENT_SET_2_LEVEL_2 (0x2 << 0)
+#define DRIVE_CURRENT_SET_2_LEVEL_1 (0x1 << 0)
+#define DRIVE_CURRENT_SET_2_LEVEL_0 (0x0 << 0)
+
+/* EXYNOS_DP_LN3_LINK_TRAINING_CTL */
+#define MAX_PRE_EMPHASIS_REACH_3 (0x1 << 5)
+#define PRE_EMPHASIS_SET_3_SET(x) (((x) & 0x3) << 3)
+#define PRE_EMPHASIS_SET_3_GET(x) (((x) >> 3) & 0x3)
+#define PRE_EMPHASIS_SET_3_MASK (0x3 << 3)
+#define PRE_EMPHASIS_SET_3_SHIFT (3)
+#define PRE_EMPHASIS_SET_3_LEVEL_3 (0x3 << 3)
+#define PRE_EMPHASIS_SET_3_LEVEL_2 (0x2 << 3)
+#define PRE_EMPHASIS_SET_3_LEVEL_1 (0x1 << 3)
+#define PRE_EMPHASIS_SET_3_LEVEL_0 (0x0 << 3)
+#define MAX_DRIVE_CURRENT_REACH_3 (0x1 << 2)
+#define DRIVE_CURRENT_SET_3_MASK (0x3 << 0)
+#define DRIVE_CURRENT_SET_3_SET(x) (((x) & 0x3) << 0)
+#define DRIVE_CURRENT_SET_3_GET(x) (((x) >> 0) & 0x3)
+#define DRIVE_CURRENT_SET_3_LEVEL_3 (0x3 << 0)
+#define DRIVE_CURRENT_SET_3_LEVEL_2 (0x2 << 0)
+#define DRIVE_CURRENT_SET_3_LEVEL_1 (0x1 << 0)
+#define DRIVE_CURRENT_SET_3_LEVEL_0 (0x0 << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_10 */
+#define FORMAT_SEL (0x1 << 4)
+#define INTERACE_SCAN_CFG (0x1 << 2)
+#define INTERACE_SCAN_CFG_SHIFT (2)
+#define VSYNC_POLARITY_CFG (0x1 << 1)
+#define V_S_POLARITY_CFG_SHIFT (1)
+#define HSYNC_POLARITY_CFG (0x1 << 0)
+#define H_S_POLARITY_CFG_SHIFT (0)
+
+/* EXYNOS_DP_SOC_GENERAL_CTL */
+#define AUDIO_MODE_SPDIF_MODE (0x1 << 8)
+#define AUDIO_MODE_MASTER_MODE (0x0 << 8)
+#define MASTER_VIDEO_INTERLACE_EN (0x1 << 4)
+#define VIDEO_MASTER_CLK_SEL (0x1 << 2)
+#define VIDEO_MASTER_MODE_EN (0x1 << 1)
+#define VIDEO_MODE_MASK (0x1 << 0)
+#define VIDEO_MODE_SLAVE_MODE (0x1 << 0)
+#define VIDEO_MODE_MASTER_MODE (0x0 << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_1 */
+#define VIDEO_EN (0x1 << 7)
+#define HDCP_VIDEO_MUTE (0x1 << 6)
+
+/* EXYNOS_DP_VIDEO_CTL_2 */
+#define IN_D_RANGE_MASK (0x1 << 7)
+#define IN_D_RANGE_SHIFT (7)
+#define IN_D_RANGE_CEA (0x1 << 7)
+#define IN_D_RANGE_VESA (0x0 << 7)
+#define IN_BPC_MASK (0x7 << 4)
+#define IN_BPC_SHIFT (4)
+#define IN_BPC_12_BITS (0x3 << 4)
+#define IN_BPC_10_BITS (0x2 << 4)
+#define IN_BPC_8_BITS (0x1 << 4)
+#define IN_BPC_6_BITS (0x0 << 4)
+#define IN_COLOR_F_MASK (0x3 << 0)
+#define IN_COLOR_F_SHIFT (0)
+#define IN_COLOR_F_YCBCR444 (0x2 << 0)
+#define IN_COLOR_F_YCBCR422 (0x1 << 0)
+#define IN_COLOR_F_RGB (0x0 << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_3 */
+#define IN_YC_COEFFI_MASK (0x1 << 7)
+#define IN_YC_COEFFI_SHIFT (7)
+#define IN_YC_COEFFI_ITU709 (0x1 << 7)
+#define IN_YC_COEFFI_ITU601 (0x0 << 7)
+#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_SHIFT (4)
+#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4)
+
+/* EXYNOS_DP_TEST_PATTERN_GEN_EN */
+#define TEST_PATTERN_GEN_EN (0x1 << 0)
+#define TEST_PATTERN_GEN_DIS (0x0 << 0)
+
+/* EXYNOS_DP_TEST_PATTERN_GEN_CTRL */
+#define TEST_PATTERN_MODE_COLOR_SQUARE (0x3 << 0)
+#define TEST_PATTERN_MODE_BALCK_WHITE_V_LINES (0x2 << 0)
+#define TEST_PATTERN_MODE_COLOR_RAMP (0x1 << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_4 */
+#define BIST_EN (0x1 << 3)
+#define BIST_WIDTH_MASK (0x1 << 2)
+#define BIST_WIDTH_BAR_32_PIXEL (0x0 << 2)
+#define BIST_WIDTH_BAR_64_PIXEL (0x1 << 2)
+#define BIST_TYPE_MASK (0x3 << 0)
+#define BIST_TYPE_COLOR_BAR (0x0 << 0)
+#define BIST_TYPE_WHITE_GRAY_BLACK_BAR (0x1 << 0)
+#define BIST_TYPE_MOBILE_WHITE_BAR (0x2 << 0)
+
+/* EXYNOS_DP_SYS_CTL_1 */
+#define DET_STA (0x1 << 2)
+#define FORCE_DET (0x1 << 1)
+#define DET_CTRL (0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_2 */
+#define CHA_CRI(x) (((x) & 0xf) << 4)
+#define CHA_STA (0x1 << 2)
+#define FORCE_CHA (0x1 << 1)
+#define CHA_CTRL (0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_3 */
+#define HPD_STATUS (0x1 << 6)
+#define F_HPD (0x1 << 5)
+#define HPD_CTRL (0x1 << 4)
+#define HDCP_RDY (0x1 << 3)
+#define STRM_VALID (0x1 << 2)
+#define F_VALID (0x1 << 1)
+#define VALID_CTRL (0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_4 */
+#define FIX_M_AUD (0x1 << 4)
+#define ENHANCED (0x1 << 3)
+#define FIX_M_VID (0x1 << 2)
+#define M_VID_UPDATE_CTRL (0x3 << 0)
+
+/* EXYNOS_M_VID_X */
+#define M_VID0_CFG(x) ((x) & 0xff)
+#define M_VID1_CFG(x) (((x) >> 8) & 0xff)
+#define M_VID2_CFG(x) (((x) >> 16) & 0xff)
+
+/* EXYNOS_M_VID_X */
+#define N_VID0_CFG(x) ((x) & 0xff)
+#define N_VID1_CFG(x) (((x) >> 8) & 0xff)
+#define N_VID2_CFG(x) (((x) >> 16) & 0xff)
+
+/* DPCD_TRAINING_PATTERN_SET */
+#define DPCD_SCRAMBLING_DISABLED (0x1 << 5)
+#define DPCD_SCRAMBLING_ENABLED (0x0 << 5)
+#define DPCD_TRAINING_PATTERN_2 (0x2 << 0)
+#define DPCD_TRAINING_PATTERN_1 (0x1 << 0)
+#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0)
+
+/* Definition for DPCD Register */
+#define DPCD_DPCD_REV (0x0000)
+#define DPCD_MAX_LINK_RATE (0x0001)
+#define DPCD_MAX_LANE_COUNT (0x0002)
+#define DPCD_LINK_BW_SET (0x0100)
+#define DPCD_LANE_COUNT_SET (0x0101)
+#define DPCD_TRAINING_PATTERN_SET (0x0102)
+#define DPCD_TRAINING_LANE0_SET (0x0103)
+#define DPCD_LANE0_1_STATUS (0x0202)
+#define DPCD_LN_ALIGN_UPDATED (0x0204)
+#define DPCD_ADJUST_REQUEST_LANE0_1 (0x0206)
+#define DPCD_ADJUST_REQUEST_LANE2_3 (0x0207)
+#define DPCD_TEST_REQUEST (0x0218)
+#define DPCD_TEST_RESPONSE (0x0260)
+#define DPCD_TEST_EDID_CHECKSUM (0x0261)
+#define DPCD_SINK_POWER_STATE (0x0600)
+
+/* DPCD_TEST_REQUEST */
+#define DPCD_TEST_EDID_READ (0x1 << 2)
+
+/* DPCD_TEST_RESPONSE */
+#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2)
+
+/* DPCD_SINK_POWER_STATE */
+#define DPCD_SET_POWER_STATE_D0 (0x1 << 0)
+#define DPCD_SET_POWER_STATE_D4 (0x2 << 0)
+
+/* I2C EDID Chip ID, Slave Address */
+#define I2C_EDID_DEVICE_ADDR (0x50)
+#define I2C_E_EDID_DEVICE_ADDR (0x30)
+#define EDID_BLOCK_LENGTH (0x80)
+#define EDID_HEADER_PATTERN (0x00)
+#define EDID_EXTENSION_FLAG (0x7e)
+#define EDID_CHECKSUM (0x7f)
+
+/* DPCD_LANE0_1_STATUS */
+#define DPCD_LANE1_SYMBOL_LOCKED (0x1 << 6)
+#define DPCD_LANE1_CHANNEL_EQ_DONE (0x1 << 5)
+#define DPCD_LANE1_CR_DONE (0x1 << 4)
+#define DPCD_LANE0_SYMBOL_LOCKED (0x1 << 2)
+#define DPCD_LANE0_CHANNEL_EQ_DONE (0x1 << 1)
+#define DPCD_LANE0_CR_DONE (0x1 << 0)
+
+/* DPCD_ADJUST_REQUEST_LANE0_1 */
+#define DPCD_PRE_EMPHASIS_LANE1_MASK (0x3 << 6)
+#define DPCD_PRE_EMPHASIS_LANE1(x) (((x) >> 6) & 0x3)
+#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_3 (0x3 << 6)
+#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_2 (0x2 << 6)
+#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_1 (0x1 << 6)
+#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_0 (0x0 << 6)
+#define DPCD_VOLTAGE_SWING_LANE1_MASK (0x3 << 4)
+#define DPCD_VOLTAGE_SWING_LANE1(x) (((x) >> 4) & 0x3)
+#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_3 (0x3 << 4)
+#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_2 (0x2 << 4)
+#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_1 (0x1 << 4)
+#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_0 (0x0 << 4)
+#define DPCD_PRE_EMPHASIS_LANE0_MASK (0x3 << 2)
+#define DPCD_PRE_EMPHASIS_LANE0(x) (((x) >> 2) & 0x3)
+#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_3 (0x3 << 2)
+#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_2 (0x2 << 2)
+#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_1 (0x1 << 2)
+#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_0 (0x0 << 2)
+#define DPCD_VOLTAGE_SWING_LANE0_MASK (0x3 << 0)
+#define DPCD_VOLTAGE_SWING_LANE0(x) (((x) >> 0) & 0x3)
+#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_3 (0x3 << 0)
+#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_2 (0x2 << 0)
+#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_1 (0x1 << 0)
+#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_0 (0x0 << 0)
+
+/* DPCD_ADJUST_REQUEST_LANE2_3 */
+#define DPCD_PRE_EMPHASIS_LANE2_MASK (0x3 << 6)
+#define DPCD_PRE_EMPHASIS_LANE2(x) (((x) >> 6) & 0x3)
+#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_3 (0x3 << 6)
+#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_2 (0x2 << 6)
+#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_1 (0x1 << 6)
+#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_0 (0x0 << 6)
+#define DPCD_VOLTAGE_SWING_LANE2_MASK (0x3 << 4)
+#define DPCD_VOLTAGE_SWING_LANE2(x) (((x) >> 4) & 0x3)
+#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_3 (0x3 << 4)
+#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_2 (0x2 << 4)
+#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_1 (0x1 << 4)
+#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_0 (0x0 << 4)
+#define DPCD_PRE_EMPHASIS_LANE3_MASK (0x3 << 2)
+#define DPCD_PRE_EMPHASIS_LANE3(x) (((x) >> 2) & 0x3)
+#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_3 (0x3 << 2)
+#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_2 (0x2 << 2)
+#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_1 (0x1 << 2)
+#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_0 (0x0 << 2)
+#define DPCD_VOLTAGE_SWING_LANE3_MASK (0x3 << 0)
+#define DPCD_VOLTAGE_SWING_LANE3(x) (((x) >> 0) & 0x3)
+#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_3 (0x3 << 0)
+#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_2 (0x2 << 0)
+#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_1 (0x1 << 0)
+#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_0 (0x0 << 0)
+
+/* DPCD_LANE_COUNT_SET */
+#define DPCD_ENHANCED_FRAME_EN (0x1 << 7)
+#define DPCD_LN_COUNT_SET(x) ((x) & 0x1f)
+
+/* DPCD_LANE_ALIGN__STATUS_UPDATED */
+#define DPCD_LINK_STATUS_UPDATED (0x1 << 7)
+#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6)
+#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0)
+
+/* DPCD_TRAINING_LANE0_SET */
+#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_3 (0x3 << 3)
+#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_2 (0x2 << 3)
+#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_1 (0x1 << 3)
+#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 (0x0 << 3)
+#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_3 (0x3 << 0)
+#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_2 (0x2 << 0)
+#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_1 (0x1 << 0)
+#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0 (0x0 << 0)
+
+#define DPCD_REQ_ADJ_SWING (0x00)
+#define DPCD_REQ_ADJ_EMPHASIS (0x01)
+
+#define DP_LANE_STAT_CR_DONE (0x01 << 0)
+#define DP_LANE_STAT_CE_DONE (0x01 << 1)
+#define DP_LANE_STAT_SYM_LOCK (0x01 << 2)
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _DP_INFO_H
+#define _DP_INFO_H
+
+#define msleep(a) udelay(a * 1000)
+
+#define DP_TIMEOUT_LOOP_COUNT 100
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 4
+
+#define EXYNOS_DP_SUCCESS 0
+
+enum {
+ DP_DISABLE,
+ DP_ENABLE,
+};
+
+struct edp_disp_info {
+ char *name;
+ unsigned int h_total;
+ unsigned int h_res;
+ unsigned int h_sync_width;
+ unsigned int h_back_porch;
+ unsigned int h_front_porch;
+ unsigned int v_total;
+ unsigned int v_res;
+ unsigned int v_sync_width;
+ unsigned int v_back_porch;
+ unsigned int v_front_porch;
+
+ unsigned int v_sync_rate;
+};
+
+struct edp_link_train_info {
+ unsigned int lt_status;
+
+ unsigned int ep_loop;
+ unsigned int cr_loop[4];
+
+};
+
+struct edp_video_info {
+ unsigned int master_mode;
+ unsigned int bist_mode;
+ unsigned int bist_pattern;
+
+ unsigned int h_sync_polarity;
+ unsigned int v_sync_polarity;
+ unsigned int interlaced;
+
+ unsigned int color_space;
+ unsigned int dynamic_range;
+ unsigned int ycbcr_coeff;
+ unsigned int color_depth;
+};
+
+struct edp_device_info {
+ struct edp_disp_info disp_info;
+ struct edp_link_train_info lt_info;
+ struct edp_video_info video_info;
+
+ /*below info get from panel during training*/
+ unsigned char lane_bw;
+ unsigned char lane_cnt;
+ unsigned char dpcd_rev;
+ /*support enhanced frame cap */
+ unsigned char dpcd_efc;
+};
+
+enum analog_power_block {
+ AUX_BLOCK,
+ CH0_BLOCK,
+ CH1_BLOCK,
+ CH2_BLOCK,
+ CH3_BLOCK,
+ ANALOG_TOTAL,
+ POWER_ALL
+};
+
+enum pll_status {
+ PLL_UNLOCKED = 0,
+ PLL_LOCKED
+};
+
+enum {
+ COLOR_RGB,
+ COLOR_YCBCR422,
+ COLOR_YCBCR444
+};
+
+enum {
+ VESA,
+ CEA
+};
+
+enum {
+ COLOR_YCBCR601,
+ COLOR_YCBCR709
+};
+
+enum {
+ COLOR_6,
+ COLOR_8,
+ COLOR_10,
+ COLOR_12
+};
+
+enum {
+ DP_LANE_BW_1_62 = 0x06,
+ DP_LANE_BW_2_70 = 0x0a,
+};
+
+enum {
+ DP_LANE_CNT_1 = 1,
+ DP_LANE_CNT_2 = 2,
+ DP_LANE_CNT_4 = 4,
+};
+
+enum {
+ DP_DPCD_REV_10 = 0x10,
+ DP_DPCD_REV_11 = 0x11,
+};
+
+enum {
+ DP_LT_NONE,
+ DP_LT_START,
+ DP_LT_CR,
+ DP_LT_ET,
+ DP_LT_FINISHED,
+ DP_LT_FAIL,
+};
+
+enum {
+ PRE_EMPHASIS_LEVEL_0,
+ PRE_EMPHASIS_LEVEL_1,
+ PRE_EMPHASIS_LEVEL_2,
+ PRE_EMPHASIS_LEVEL_3,
+};
+
+enum {
+ PRBS7,
+ D10_2,
+ TRAINING_PTN1,
+ TRAINING_PTN2,
+ DP_NONE
+};
+
+enum {
+ VOLTAGE_LEVEL_0,
+ VOLTAGE_LEVEL_1,
+ VOLTAGE_LEVEL_2,
+ VOLTAGE_LEVEL_3,
+};
+
+enum pattern_type {
+ NO_PATTERN,
+ COLOR_RAMP,
+ BALCK_WHITE_V_LINES,
+ COLOR_SQUARE,
+ INVALID_PATTERN,
+ COLORBAR_32,
+ COLORBAR_64,
+ WHITE_GRAY_BALCKBAR_32,
+ WHITE_GRAY_BALCKBAR_64,
+ MOBILE_WHITEBAR_32,
+ MOBILE_WHITEBAR_64
+};
+
+enum {
+ CALCULATED_M,
+ REGISTER_M
+};
+
+enum {
+ VIDEO_TIMING_FROM_CAPTURE,
+ VIDEO_TIMING_FROM_REGISTER
+};
+
+
+struct exynos_dp_platform_data {
+ struct edp_device_info *edp_dev_info;
+ void (*phy_enable)(unsigned int);
+};
+
+#ifdef CONFIG_EXYNOS_DP
+unsigned int exynos_init_dp(void);
+#else
+unsigned int exynos_init_dp(void)
+{
+ return 0;
+}
+#endif
+
+#endif /* _DP_INFO_H */
COBJS-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o
+COBJS-$(CONFIG_EXYNOS_DP) += exynos_dp.o exynos_dp_lowlevel.o
COBJS-$(CONFIG_EXYNOS_FB) += exynos_fb.o exynos_fimd.o
COBJS-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \
exynos_mipi_dsi_lowlevel.o
--- /dev/null
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <linux/err.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dp_info.h>
+#include <asm/arch/dp.h>
+
+#include "exynos_dp_lowlevel.h"
+
+static struct exynos_dp_platform_data *dp_pd;
+
+static void exynos_dp_disp_info(struct edp_disp_info *disp_info)
+{
+ disp_info->h_total = disp_info->h_res + disp_info->h_sync_width +
+ disp_info->h_back_porch + disp_info->h_front_porch;
+ disp_info->v_total = disp_info->v_res + disp_info->v_sync_width +
+ disp_info->v_back_porch + disp_info->v_front_porch;
+
+ return;
+}
+
+static int exynos_dp_init_dp(void)
+{
+ int ret;
+ exynos_dp_reset();
+
+ /* SW defined function Normal operation */
+ exynos_dp_enable_sw_func(DP_ENABLE);
+
+ ret = exynos_dp_init_analog_func();
+ if (ret != EXYNOS_DP_SUCCESS)
+ return ret;
+
+ exynos_dp_init_hpd();
+ exynos_dp_init_aux();
+
+ return ret;
+}
+
+static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data)
+{
+ int i;
+ unsigned char sum = 0;
+
+ for (i = 0; i < EDID_BLOCK_LENGTH; i++)
+ sum = sum + edid_data[i];
+
+ return sum;
+}
+
+static unsigned int exynos_dp_read_edid(void)
+{
+ unsigned char edid[EDID_BLOCK_LENGTH * 2];
+ unsigned int extend_block = 0;
+ unsigned char sum;
+ unsigned char test_vector;
+ int retval;
+
+ /*
+ * EDID device address is 0x50.
+ * However, if necessary, you must have set upper address
+ * into E-EDID in I2C device, 0x30.
+ */
+
+ /* Read Extension Flag, Number of 128-byte EDID extension blocks */
+ exynos_dp_read_byte_from_i2c(I2C_EDID_DEVICE_ADDR, EDID_EXTENSION_FLAG,
+ &extend_block);
+
+ if (extend_block > 0) {
+ printf("DP EDID data includes a single extension!\n");
+
+ /* Read EDID data */
+ retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
+ EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH,
+ &edid[EDID_HEADER_PATTERN]);
+ if (retval != 0) {
+ printf("DP EDID Read failed!\n");
+ return -1;
+ }
+ sum = exynos_dp_calc_edid_check_sum(edid);
+ if (sum != 0) {
+ printf("DP EDID bad checksum!\n");
+ return -1;
+ }
+
+ /* Read additional EDID data */
+ retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
+ EDID_BLOCK_LENGTH,
+ EDID_BLOCK_LENGTH,
+ &edid[EDID_BLOCK_LENGTH]);
+ if (retval != 0) {
+ printf("DP EDID Read failed!\n");
+ return -1;
+ }
+ sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
+ if (sum != 0) {
+ printf("DP EDID bad checksum!\n");
+ return -1;
+ }
+
+ exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST,
+ &test_vector);
+ if (test_vector & DPCD_TEST_EDID_READ) {
+ exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM,
+ edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
+ exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE,
+ DPCD_TEST_EDID_CHECKSUM_WRITE);
+ }
+ } else {
+ debug("DP EDID data does not include any extensions.\n");
+
+ /* Read EDID data */
+ retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
+ EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH,
+ &edid[EDID_HEADER_PATTERN]);
+
+ if (retval != 0) {
+ printf("DP EDID Read failed!\n");
+ return -1;
+ }
+ sum = exynos_dp_calc_edid_check_sum(edid);
+ if (sum != 0) {
+ printf("DP EDID bad checksum!\n");
+ return -1;
+ }
+
+ exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST,
+ &test_vector);
+ if (test_vector & DPCD_TEST_EDID_READ) {
+ exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM,
+ edid[EDID_CHECKSUM]);
+ exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE,
+ DPCD_TEST_EDID_CHECKSUM_WRITE);
+ }
+ }
+
+ debug("DP EDID Read success!\n");
+
+ return 0;
+}
+
+static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info)
+{
+ unsigned char buf[12];
+ unsigned int ret;
+ unsigned char temp;
+ unsigned char retry_cnt;
+ unsigned char dpcd_rev[16];
+ unsigned char lane_bw[16];
+ unsigned char lane_cnt[16];
+
+ memset(dpcd_rev, 0, 16);
+ memset(lane_bw, 0, 16);
+ memset(lane_cnt, 0, 16);
+ memset(buf, 0, 12);
+
+ retry_cnt = 5;
+ while (retry_cnt) {
+ /* Read DPCD 0x0000-0x000b */
+ ret = exynos_dp_read_bytes_from_dpcd(DPCD_DPCD_REV, 12,
+ buf);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ if (retry_cnt == 0) {
+ printf("DP read_byte_from_dpcd() failed\n");
+ return ret;
+ }
+ retry_cnt--;
+ } else
+ break;
+ }
+
+ /* */
+ temp = buf[DPCD_DPCD_REV];
+ if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11)
+ edp_info->dpcd_rev = temp;
+ else {
+ printf("DP Wrong DPCD Rev : %x\n", temp);
+ return -ENODEV;
+ }
+
+ temp = buf[DPCD_MAX_LINK_RATE];
+ if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70)
+ edp_info->lane_bw = temp;
+ else {
+ printf("DP Wrong MAX LINK RATE : %x\n", temp);
+ return -EINVAL;
+ }
+
+ /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */
+ if (edp_info->dpcd_rev == DP_DPCD_REV_11) {
+ temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f;
+ if (buf[DPCD_MAX_LANE_COUNT] & 0x80)
+ edp_info->dpcd_efc = 1;
+ else
+ edp_info->dpcd_efc = 0;
+ } else {
+ temp = buf[DPCD_MAX_LANE_COUNT];
+ edp_info->dpcd_efc = 0;
+ }
+
+ if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 ||
+ temp == DP_LANE_CNT_4) {
+ edp_info->lane_cnt = temp;
+ } else {
+ printf("DP Wrong MAX LANE COUNT : %x\n", temp);
+ return -EINVAL;
+ }
+
+ ret = exynos_dp_read_edid();
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP exynos_dp_read_edid() failed\n");
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static void exynos_dp_init_training(void)
+{
+ /*
+ * MACRO_RST must be applied after the PLL_LOCK to avoid
+ * the DP inter pair skew issue for at least 10 us
+ */
+ exynos_dp_reset_macro();
+
+ /* All DP analog module power up */
+ exynos_dp_set_analog_power_down(POWER_ALL, 0);
+}
+
+static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info)
+{
+ unsigned char buf[5];
+ unsigned int ret = 0;
+
+ debug("DP: %s was called\n", __func__);
+
+ edp_info->lt_info.lt_status = DP_LT_CR;
+ edp_info->lt_info.ep_loop = 0;
+ edp_info->lt_info.cr_loop[0] = 0;
+ edp_info->lt_info.cr_loop[1] = 0;
+ edp_info->lt_info.cr_loop[2] = 0;
+ edp_info->lt_info.cr_loop[3] = 0;
+
+ /* Set sink to D0 (Sink Not Ready) mode. */
+ ret = exynos_dp_write_byte_to_dpcd(DPCD_SINK_POWER_STATE,
+ DPCD_SET_POWER_STATE_D0);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP write_dpcd_byte failed\n");
+ return ret;
+ }
+
+ /* Set link rate and count as you want to establish*/
+ exynos_dp_set_link_bandwidth(edp_info->lane_bw);
+ exynos_dp_set_lane_count(edp_info->lane_cnt);
+
+ /* Setup RX configuration */
+ buf[0] = edp_info->lane_bw;
+ buf[1] = edp_info->lane_cnt;
+
+ ret = exynos_dp_write_bytes_to_dpcd(DPCD_LINK_BW_SET, 2,
+ buf);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP write_dpcd_byte failed\n");
+ return ret;
+ }
+
+ exynos_dp_set_lane_pre_emphasis(PRE_EMPHASIS_LEVEL_0,
+ edp_info->lane_cnt);
+
+ /* Set training pattern 1 */
+ exynos_dp_set_training_pattern(TRAINING_PTN1);
+
+ /* Set RX training pattern */
+ buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1;
+
+ buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
+ DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
+ buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
+ DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
+ buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
+ DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
+ buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
+ DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
+
+ ret = exynos_dp_write_bytes_to_dpcd(DPCD_TRAINING_PATTERN_SET,
+ 5, buf);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP write_dpcd_byte failed\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static unsigned int exynos_dp_training_pattern_dis(void)
+{
+ unsigned int ret = EXYNOS_DP_SUCCESS;
+
+ exynos_dp_set_training_pattern(DP_NONE);
+
+ ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
+ DPCD_TRAINING_PATTERN_DISABLED);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP requst_link_traninig_req failed\n");
+ return -EAGAIN;
+ }
+
+ return ret;
+}
+
+static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable)
+{
+ unsigned char data;
+ unsigned int ret = EXYNOS_DP_SUCCESS;
+
+ ret = exynos_dp_read_byte_from_dpcd(DPCD_LANE_COUNT_SET,
+ &data);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP read_from_dpcd failed\n");
+ return -EAGAIN;
+ }
+
+ if (enable)
+ data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data);
+ else
+ data = DPCD_LN_COUNT_SET(data);
+
+ ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET,
+ data);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP write_to_dpcd failed\n");
+ return -EAGAIN;
+
+ }
+
+ return ret;
+}
+
+static unsigned int exynos_dp_set_enhanced_mode(unsigned char enhance_mode)
+{
+ unsigned int ret = EXYNOS_DP_SUCCESS;
+
+ ret = exynos_dp_enable_rx_to_enhanced_mode(enhance_mode);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP rx_enhance_mode failed\n");
+ return -EAGAIN;
+ }
+
+ exynos_dp_enable_enhanced_mode(enhance_mode);
+
+ return ret;
+}
+
+static int exynos_dp_read_dpcd_lane_stat(struct edp_device_info *edp_info,
+ unsigned char *status)
+{
+ unsigned int ret, i;
+ unsigned char buf[2];
+ unsigned char lane_stat[DP_LANE_CNT_4] = {0,};
+ unsigned char shift_val[DP_LANE_CNT_4] = {0,};
+
+ shift_val[0] = 0;
+ shift_val[1] = 4;
+ shift_val[2] = 0;
+ shift_val[3] = 4;
+
+ ret = exynos_dp_read_bytes_from_dpcd(DPCD_LANE0_1_STATUS, 2, buf);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP read lane status failed\n");
+ return ret;
+ }
+
+ for (i = 0; i < edp_info->lane_cnt; i++) {
+ lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f;
+ if (lane_stat[0] != lane_stat[i]) {
+ printf("Wrong lane status\n");
+ return -EINVAL;
+ }
+ }
+
+ *status = lane_stat[0];
+
+ return ret;
+}
+
+static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num,
+ unsigned char *sw, unsigned char *em)
+{
+ unsigned int ret = EXYNOS_DP_SUCCESS;
+ unsigned char buf;
+ unsigned int dpcd_addr;
+ unsigned char shift_val[DP_LANE_CNT_4] = {0, 4, 0, 4};
+
+ /*lane_num value is used as arry index, so this range 0 ~ 3 */
+ dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2);
+
+ ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP read adjust request failed\n");
+ return -EAGAIN;
+ }
+
+ *sw = ((buf >> shift_val[lane_num]) & 0x03);
+ *em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2;
+
+ return ret;
+}
+
+static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info)
+{
+ int ret;
+
+ ret = exynos_dp_training_pattern_dis();
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP training_patter_disable() failed\n");
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+ }
+
+ ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP set_enhanced_mode() failed\n");
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+ }
+
+ return ret;
+}
+
+static int exynos_dp_reduce_link_rate(struct edp_device_info *edp_info)
+{
+ int ret;
+
+ if (edp_info->lane_bw == DP_LANE_BW_2_70) {
+ edp_info->lane_bw = DP_LANE_BW_1_62;
+ printf("DP Change lane bw to 1.62Gbps\n");
+ edp_info->lt_info.lt_status = DP_LT_START;
+ ret = EXYNOS_DP_SUCCESS;
+ } else {
+ ret = exynos_dp_training_pattern_dis();
+ if (ret != EXYNOS_DP_SUCCESS)
+ printf("DP training_patter_disable() failed\n");
+
+ ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc);
+ if (ret != EXYNOS_DP_SUCCESS)
+ printf("DP set_enhanced_mode() failed\n");
+
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+ }
+
+ return ret;
+}
+
+static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info
+ *edp_info)
+{
+ unsigned int ret = EXYNOS_DP_SUCCESS;
+ unsigned char lane_stat;
+ unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, };
+ unsigned int i;
+ unsigned char adj_req_sw;
+ unsigned char adj_req_em;
+ unsigned char buf[5];
+
+ debug("DP: %s was called\n", __func__);
+ mdelay(1);
+
+ ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP read lane status failed\n");
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+ return ret;
+ }
+
+ if (lane_stat & DP_LANE_STAT_CR_DONE) {
+ debug("DP clock Recovery training succeed\n");
+ exynos_dp_set_training_pattern(TRAINING_PTN2);
+
+ for (i = 0; i < edp_info->lane_cnt; i++) {
+ ret = exynos_dp_read_dpcd_adj_req(i, &adj_req_sw,
+ &adj_req_em);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+ return ret;
+ }
+
+ lt_ctl_val[i] = 0;
+ lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
+
+ if ((adj_req_sw == VOLTAGE_LEVEL_3)
+ || (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
+ lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 |
+ MAX_PRE_EMPHASIS_REACH_3;
+ }
+ exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i);
+ }
+
+ buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2;
+ buf[1] = lt_ctl_val[0];
+ buf[2] = lt_ctl_val[1];
+ buf[3] = lt_ctl_val[2];
+ buf[4] = lt_ctl_val[3];
+
+ ret = exynos_dp_write_bytes_to_dpcd(
+ DPCD_TRAINING_PATTERN_SET, 5, buf);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP write traning pattern1 failed\n");
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+ return ret;
+ } else
+ edp_info->lt_info.lt_status = DP_LT_ET;
+ } else {
+ for (i = 0; i < edp_info->lane_cnt; i++) {
+ lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(i);
+ ret = exynos_dp_read_dpcd_adj_req(i,
+ &adj_req_sw, &adj_req_em);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP read adj req failed\n");
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+ return ret;
+ }
+
+ if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
+ (adj_req_em == PRE_EMPHASIS_LEVEL_3))
+ ret = exynos_dp_reduce_link_rate(edp_info);
+
+ if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) ==
+ adj_req_sw) &&
+ (PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) ==
+ adj_req_em)) {
+ edp_info->lt_info.cr_loop[i]++;
+ if (edp_info->lt_info.cr_loop[i] == MAX_CR_LOOP)
+ ret = exynos_dp_reduce_link_rate(
+ edp_info);
+ }
+
+ lt_ctl_val[i] = 0;
+ lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
+
+ if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
+ (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
+ lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 |
+ MAX_PRE_EMPHASIS_REACH_3;
+ }
+ exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i);
+ }
+
+ ret = exynos_dp_write_bytes_to_dpcd(
+ DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP write traning pattern2 failed\n");
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static unsigned int exynos_dp_process_equalizer_training(struct edp_device_info
+ *edp_info)
+{
+ unsigned int ret = EXYNOS_DP_SUCCESS;
+ unsigned char lane_stat, adj_req_sw, adj_req_em, i;
+ unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,};
+ unsigned char interlane_aligned = 0;
+ unsigned char f_bw;
+ unsigned char f_lane_cnt;
+ unsigned char sink_stat;
+
+ mdelay(1);
+
+ ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP read lane status failed\n");
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+ return ret;
+ }
+
+ debug("DP lane stat : %x\n", lane_stat);
+
+ if (lane_stat & DP_LANE_STAT_CR_DONE) {
+ ret = exynos_dp_read_byte_from_dpcd(DPCD_LN_ALIGN_UPDATED,
+ &sink_stat);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+
+ return ret;
+ }
+
+ interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE);
+
+ for (i = 0; i < edp_info->lane_cnt; i++) {
+ ret = exynos_dp_read_dpcd_adj_req(i,
+ &adj_req_sw, &adj_req_em);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP read adj req 1 failed\n");
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+
+ return ret;
+ }
+
+ lt_ctl_val[i] = 0;
+ lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
+
+ if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
+ (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
+ lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3;
+ lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3;
+ }
+ }
+
+ if (((lane_stat&DP_LANE_STAT_CE_DONE) &&
+ (lane_stat&DP_LANE_STAT_SYM_LOCK))
+ && (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) {
+ debug("DP Equalizer training succeed\n");
+
+ f_bw = exynos_dp_get_link_bandwidth();
+ f_lane_cnt = exynos_dp_get_lane_count();
+
+ debug("DP final BandWidth : %x\n", f_bw);
+ debug("DP final Lane Count : %x\n", f_lane_cnt);
+
+ edp_info->lt_info.lt_status = DP_LT_FINISHED;
+
+ exynos_dp_equalizer_err_link(edp_info);
+
+ } else {
+ edp_info->lt_info.ep_loop++;
+
+ if (edp_info->lt_info.ep_loop > MAX_EQ_LOOP) {
+ if (edp_info->lane_bw == DP_LANE_BW_2_70) {
+ ret = exynos_dp_reduce_link_rate(
+ edp_info);
+ } else {
+ edp_info->lt_info.lt_status =
+ DP_LT_FAIL;
+ exynos_dp_equalizer_err_link(edp_info);
+ }
+ } else {
+ for (i = 0; i < edp_info->lane_cnt; i++)
+ exynos_dp_set_lanex_pre_emphasis(
+ lt_ctl_val[i], i);
+
+ ret = exynos_dp_write_bytes_to_dpcd(
+ DPCD_TRAINING_LANE0_SET,
+ 4, lt_ctl_val);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP set lt pattern failed\n");
+ edp_info->lt_info.lt_status =
+ DP_LT_FAIL;
+ exynos_dp_equalizer_err_link(edp_info);
+ }
+ }
+ }
+ } else if (edp_info->lane_bw == DP_LANE_BW_2_70) {
+ ret = exynos_dp_reduce_link_rate(edp_info);
+ } else {
+ edp_info->lt_info.lt_status = DP_LT_FAIL;
+ exynos_dp_equalizer_err_link(edp_info);
+ }
+
+ return ret;
+}
+
+static unsigned int exynos_dp_sw_link_training(struct edp_device_info *edp_info)
+{
+ unsigned int ret = 0;
+ int training_finished;
+
+ /* Turn off unnecessary lane */
+ if (edp_info->lane_cnt == 1)
+ exynos_dp_set_analog_power_down(CH1_BLOCK, 1);
+
+ training_finished = 0;
+
+ edp_info->lt_info.lt_status = DP_LT_START;
+
+ /* Process here */
+ while (!training_finished) {
+ switch (edp_info->lt_info.lt_status) {
+ case DP_LT_START:
+ ret = exynos_dp_link_start(edp_info);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP LT:link start failed\n");
+ return ret;
+ }
+ break;
+ case DP_LT_CR:
+ ret = exynos_dp_process_clock_recovery(edp_info);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP LT:clock recovery failed\n");
+ return ret;
+ }
+ break;
+ case DP_LT_ET:
+ ret = exynos_dp_process_equalizer_training(edp_info);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP LT:equalizer training failed\n");
+ return ret;
+ }
+ break;
+ case DP_LT_FINISHED:
+ training_finished = 1;
+ break;
+ case DP_LT_FAIL:
+ return -1;
+ }
+ }
+
+ return ret;
+}
+
+static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info)
+{
+ unsigned int ret;
+
+ exynos_dp_init_training();
+
+ ret = exynos_dp_sw_link_training(edp_info);
+ if (ret != EXYNOS_DP_SUCCESS)
+ printf("DP dp_sw_link_traning() failed\n");
+
+ return ret;
+}
+
+static void exynos_dp_enable_scramble(unsigned int enable)
+{
+ unsigned char data;
+
+ if (enable) {
+ exynos_dp_enable_scrambling(DP_ENABLE);
+
+ exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET,
+ &data);
+ exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
+ (u8)(data & ~DPCD_SCRAMBLING_DISABLED));
+ } else {
+ exynos_dp_enable_scrambling(DP_DISABLE);
+ exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET,
+ &data);
+ exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
+ (u8)(data | DPCD_SCRAMBLING_DISABLED));
+ }
+}
+
+static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info)
+{
+ unsigned int ret = 0;
+ unsigned int retry_cnt;
+
+ mdelay(1);
+
+ if (edp_info->video_info.master_mode) {
+ printf("DP does not support master mode\n");
+ return -ENODEV;
+ } else {
+ /* debug slave */
+ exynos_dp_config_video_slave_mode(&edp_info->video_info);
+ }
+
+ exynos_dp_set_video_color_format(&edp_info->video_info);
+
+ if (edp_info->video_info.bist_mode) {
+ if (exynos_dp_config_video_bist(edp_info) != 0)
+ return -1;
+ }
+
+ ret = exynos_dp_get_pll_lock_status();
+ if (ret != PLL_LOCKED) {
+ printf("DP PLL is not locked yet\n");
+ return -EIO;
+ }
+
+ if (edp_info->video_info.master_mode == 0) {
+ retry_cnt = 10;
+ while (retry_cnt) {
+ ret = exynos_dp_is_slave_video_stream_clock_on();
+ if (ret != EXYNOS_DP_SUCCESS) {
+ if (retry_cnt == 0) {
+ printf("DP stream_clock_on failed\n");
+ return ret;
+ }
+ retry_cnt--;
+ mdelay(1);
+ } else
+ break;
+ }
+ }
+
+ /* Set to use the register calculated M/N video */
+ exynos_dp_set_video_cr_mn(CALCULATED_M, 0, 0);
+
+ /* For video bist, Video timing must be generated by register */
+ exynos_dp_set_video_timing_mode(VIDEO_TIMING_FROM_CAPTURE);
+
+ /* Enable video bist */
+ if (edp_info->video_info.bist_pattern != COLOR_RAMP &&
+ edp_info->video_info.bist_pattern != BALCK_WHITE_V_LINES &&
+ edp_info->video_info.bist_pattern != COLOR_SQUARE)
+ exynos_dp_enable_video_bist(edp_info->video_info.bist_mode);
+ else
+ exynos_dp_enable_video_bist(DP_DISABLE);
+
+ /* Disable video mute */
+ exynos_dp_enable_video_mute(DP_DISABLE);
+
+ /* Configure video Master or Slave mode */
+ exynos_dp_enable_video_master(edp_info->video_info.master_mode);
+
+ /* Enable video */
+ exynos_dp_start_video();
+
+ if (edp_info->video_info.master_mode == 0) {
+ retry_cnt = 100;
+ while (retry_cnt) {
+ ret = exynos_dp_is_video_stream_on();
+ if (ret != EXYNOS_DP_SUCCESS) {
+ if (retry_cnt == 0) {
+ printf("DP Timeout of video stream\n");
+ return ret;
+ }
+ retry_cnt--;
+ mdelay(5);
+ } else
+ break;
+ }
+ }
+
+ return ret;
+}
+
+unsigned int exynos_init_dp(void)
+{
+ unsigned int ret;
+ struct edp_device_info *edp_info;
+ struct edp_disp_info disp_info;
+
+ edp_info = kzalloc(sizeof(struct edp_device_info), GFP_KERNEL);
+ if (!edp_info) {
+ debug("failed to allocate edp device object.\n");
+ return -EFAULT;
+ }
+
+ edp_info = dp_pd->edp_dev_info;
+ if (edp_info == NULL) {
+ debug("failed to get edp_info data.\n");
+ return -EFAULT;
+ }
+ disp_info = edp_info->disp_info;
+
+ exynos_dp_disp_info(&edp_info->disp_info);
+
+ if (dp_pd->phy_enable)
+ dp_pd->phy_enable(1);
+
+ ret = exynos_dp_init_dp();
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP exynos_dp_init_dp() failed\n");
+ return ret;
+ }
+
+ ret = exynos_dp_handle_edid(edp_info);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("EDP handle_edid fail\n");
+ return ret;
+ }
+
+ ret = exynos_dp_set_link_train(edp_info);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP link training fail\n");
+ return ret;
+ }
+
+ exynos_dp_enable_scramble(DP_ENABLE);
+ exynos_dp_enable_rx_to_enhanced_mode(DP_ENABLE);
+ exynos_dp_enable_enhanced_mode(DP_ENABLE);
+
+ exynos_dp_set_link_bandwidth(edp_info->lane_bw);
+ exynos_dp_set_lane_count(edp_info->lane_cnt);
+
+ exynos_dp_init_video();
+ ret = exynos_dp_config_video(edp_info);
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("Exynos DP init failed\n");
+ return ret;
+ }
+
+ printf("Exynos DP init done\n");
+
+ return ret;
+}
+
+void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd)
+{
+ if (pd == NULL) {
+ debug("pd is NULL\n");
+ return;
+ }
+
+ dp_pd = pd;
+}
--- /dev/null
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <linux/err.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dp_info.h>
+#include <asm/arch/dp.h>
+
+static void exynos_dp_enable_video_input(unsigned int enable)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->video_ctl1);
+ reg &= ~VIDEO_EN_MASK;
+
+ /* enable video input*/
+ if (enable)
+ reg |= VIDEO_EN_MASK;
+
+ writel(reg, &dp_regs->video_ctl1);
+
+ return;
+}
+
+void exynos_dp_enable_video_bist(unsigned int enable)
+{
+ /*enable video bist*/
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->video_ctl4);
+ reg &= ~VIDEO_BIST_MASK;
+
+ /*enable video bist*/
+ if (enable)
+ reg |= VIDEO_BIST_MASK;
+
+ writel(reg, &dp_regs->video_ctl4);
+
+ return;
+}
+
+void exynos_dp_enable_video_mute(unsigned int enable)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->video_ctl1);
+ reg &= ~(VIDEO_MUTE_MASK);
+ if (enable)
+ reg |= VIDEO_MUTE_MASK;
+
+ writel(reg, &dp_regs->video_ctl1);
+
+ return;
+}
+
+
+static void exynos_dp_init_analog_param(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /*
+ * Set termination
+ * Normal bandgap, Normal swing, Tx terminal registor 61 ohm
+ * 24M Phy clock, TX digital logic power is 100:1.0625V
+ */
+ reg = SEL_BG_NEW_BANDGAP | TX_TERMINAL_CTRL_61_OHM |
+ SWING_A_30PER_G_NORMAL;
+ writel(reg, &dp_regs->analog_ctl1);
+
+ reg = SEL_24M | TX_DVDD_BIT_1_0625V;
+ writel(reg, &dp_regs->analog_ctl2);
+
+ /*
+ * Set power source for internal clk driver to 1.0625v.
+ * Select current reference of TX driver current to 00:Ipp/2+Ic/2.
+ * Set VCO range of PLL +- 0uA
+ */
+ reg = DRIVE_DVDD_BIT_1_0625V | SEL_CURRENT_DEFAULT | VCO_BIT_000_MICRO;
+ writel(reg, &dp_regs->analog_ctl3);
+
+ /*
+ * Set AUX TX terminal resistor to 102 ohm
+ * Set AUX channel amplitude control
+ */
+ reg = PD_RING_OSC | AUX_TERMINAL_CTRL_52_OHM | TX_CUR1_2X | TX_CUR_4_MA;
+ writel(reg, &dp_regs->pll_filter_ctl1);
+
+ /*
+ * PLL loop filter bandwidth
+ * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz
+ * PLL digital power select: 1.2500V
+ */
+ reg = CH3_AMP_0_MV | CH2_AMP_0_MV | CH1_AMP_0_MV | CH0_AMP_0_MV;
+
+ writel(reg, &dp_regs->amp_tuning_ctl);
+
+ /*
+ * PLL loop filter bandwidth
+ * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz
+ * PLL digital power select: 1.1250V
+ */
+ reg = DP_PLL_LOOP_BIT_DEFAULT | DP_PLL_REF_BIT_1_1250V;
+ writel(reg, &dp_regs->pll_ctl);
+}
+
+static void exynos_dp_init_interrupt(void)
+{
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+ /* Set interrupt registers to initial states */
+
+ /*
+ * Disable interrupt
+ * INT pin assertion polarity. It must be configured
+ * correctly according to ICU setting.
+ * 1 = assert high, 0 = assert low
+ */
+ writel(INT_POL, &dp_regs->int_ctl);
+
+ /* Clear pending regisers */
+ writel(0xff, &dp_regs->common_int_sta1);
+ writel(0xff, &dp_regs->common_int_sta2);
+ writel(0xff, &dp_regs->common_int_sta3);
+ writel(0xff, &dp_regs->common_int_sta4);
+ writel(0xff, &dp_regs->int_sta);
+
+ /* 0:mask,1: unmask */
+ writel(0x00, &dp_regs->int_sta_mask1);
+ writel(0x00, &dp_regs->int_sta_mask2);
+ writel(0x00, &dp_regs->int_sta_mask3);
+ writel(0x00, &dp_regs->int_sta_mask4);
+ writel(0x00, &dp_regs->int_sta_mask);
+}
+
+void exynos_dp_reset(void)
+{
+ unsigned int reg_func_1;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /*dp tx sw reset*/
+ writel(RESET_DP_TX, &dp_regs->tx_sw_reset);
+
+ exynos_dp_enable_video_input(DP_DISABLE);
+ exynos_dp_enable_video_bist(DP_DISABLE);
+ exynos_dp_enable_video_mute(DP_DISABLE);
+
+ /* software reset */
+ reg_func_1 = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
+ AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
+ HDCP_FUNC_EN_N | SW_FUNC_EN_N;
+
+ writel(reg_func_1, &dp_regs->func_en1);
+ writel(reg_func_1, &dp_regs->func_en2);
+
+ mdelay(1);
+
+ exynos_dp_init_analog_param();
+ exynos_dp_init_interrupt();
+
+ return;
+}
+
+void exynos_dp_enable_sw_func(unsigned int enable)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->func_en1);
+ reg &= ~(SW_FUNC_EN_N);
+
+ if (!enable)
+ reg |= SW_FUNC_EN_N;
+
+ writel(reg, &dp_regs->func_en1);
+
+ return;
+}
+
+unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->phy_pd);
+ switch (block) {
+ case AUX_BLOCK:
+ reg &= ~(AUX_PD);
+ if (enable)
+ reg |= AUX_PD;
+ break;
+ case CH0_BLOCK:
+ reg &= ~(CH0_PD);
+ if (enable)
+ reg |= CH0_PD;
+ break;
+ case CH1_BLOCK:
+ reg &= ~(CH1_PD);
+ if (enable)
+ reg |= CH1_PD;
+ break;
+ case CH2_BLOCK:
+ reg &= ~(CH2_PD);
+ if (enable)
+ reg |= CH2_PD;
+ break;
+ case CH3_BLOCK:
+ reg &= ~(CH3_PD);
+ if (enable)
+ reg |= CH3_PD;
+ break;
+ case ANALOG_TOTAL:
+ reg &= ~PHY_PD;
+ if (enable)
+ reg |= PHY_PD;
+ break;
+ case POWER_ALL:
+ reg &= ~(PHY_PD | AUX_PD | CH0_PD | CH1_PD | CH2_PD |
+ CH3_PD);
+ if (enable)
+ reg |= (PHY_PD | AUX_PD | CH0_PD | CH1_PD |
+ CH2_PD | CH3_PD);
+ break;
+ default:
+ printf("DP undefined block number : %d\n", block);
+ return -1;
+ }
+
+ writel(reg, &dp_regs->phy_pd);
+
+ return 0;
+}
+
+unsigned int exynos_dp_get_pll_lock_status(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->debug_ctl);
+
+ if (reg & PLL_LOCK)
+ return PLL_LOCKED;
+ else
+ return PLL_UNLOCKED;
+}
+
+static void exynos_dp_set_pll_power(unsigned int enable)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->pll_ctl);
+ reg &= ~(DP_PLL_PD);
+
+ if (!enable)
+ reg |= DP_PLL_PD;
+
+ writel(reg, &dp_regs->pll_ctl);
+}
+
+int exynos_dp_init_analog_func(void)
+{
+ int ret = EXYNOS_DP_SUCCESS;
+ unsigned int retry_cnt = 10;
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /*Power On All Analog block */
+ exynos_dp_set_analog_power_down(POWER_ALL, DP_DISABLE);
+
+ reg = PLL_LOCK_CHG;
+ writel(reg, &dp_regs->common_int_sta1);
+
+ reg = readl(&dp_regs->debug_ctl);
+ reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
+ writel(reg, &dp_regs->debug_ctl);
+
+ /*Assert DP PLL Reset*/
+ reg = readl(&dp_regs->pll_ctl);
+ reg |= DP_PLL_RESET;
+ writel(reg, &dp_regs->pll_ctl);
+
+ mdelay(1);
+
+ /*Deassert DP PLL Reset*/
+ reg = readl(&dp_regs->pll_ctl);
+ reg &= ~(DP_PLL_RESET);
+ writel(reg, &dp_regs->pll_ctl);
+
+ exynos_dp_set_pll_power(DP_ENABLE);
+
+ while (exynos_dp_get_pll_lock_status() == PLL_UNLOCKED) {
+ mdelay(1);
+ retry_cnt--;
+ if (retry_cnt == 0) {
+ printf("DP dp's pll lock failed : retry : %d\n",
+ retry_cnt);
+ return -EINVAL;
+ }
+ }
+
+ debug("dp's pll lock success(%d)\n", retry_cnt);
+
+ /* Enable Serdes FIFO function and Link symbol clock domain module */
+ reg = readl(&dp_regs->func_en2);
+ reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
+ | AUX_FUNC_EN_N);
+ writel(reg, &dp_regs->func_en2);
+
+ return ret;
+}
+
+void exynos_dp_init_hpd(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Clear interrupts releated to Hot Plug Dectect */
+ reg = HOTPLUG_CHG | HPD_LOST | PLUG;
+ writel(reg, &dp_regs->common_int_sta4);
+
+ reg = INT_HPD;
+ writel(reg, &dp_regs->int_sta);
+
+ reg = readl(&dp_regs->sys_ctl3);
+ reg &= ~(F_HPD | HPD_CTRL);
+ writel(reg, &dp_regs->sys_ctl3);
+
+ return;
+}
+
+static inline void exynos_dp_reset_aux(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Disable AUX channel module */
+ reg = readl(&dp_regs->func_en2);
+ reg |= AUX_FUNC_EN_N;
+ writel(reg, &dp_regs->func_en2);
+
+ return;
+}
+
+void exynos_dp_init_aux(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Clear inerrupts related to AUX channel */
+ reg = RPLY_RECEIV | AUX_ERR;
+ writel(reg, &dp_regs->int_sta);
+
+ exynos_dp_reset_aux();
+
+ /* Disable AUX transaction H/W retry */
+ reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(3)|
+ AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+ writel(reg, &dp_regs->aux_hw_retry_ctl);
+
+ /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
+ reg = DEFER_CTRL_EN | DEFER_COUNT(1);
+ writel(reg, &dp_regs->aux_ch_defer_ctl);
+
+ /* Enable AUX channel module */
+ reg = readl(&dp_regs->func_en2);
+ reg &= ~AUX_FUNC_EN_N;
+ writel(reg, &dp_regs->func_en2);
+
+ return;
+}
+
+void exynos_dp_config_interrupt(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* 0: mask, 1: unmask */
+ reg = COMMON_INT_MASK_1;
+ writel(reg, &dp_regs->common_int_mask1);
+
+ reg = COMMON_INT_MASK_2;
+ writel(reg, &dp_regs->common_int_mask2);
+
+ reg = COMMON_INT_MASK_3;
+ writel(reg, &dp_regs->common_int_mask3);
+
+ reg = COMMON_INT_MASK_4;
+ writel(reg, &dp_regs->common_int_mask4);
+
+ reg = INT_STA_MASK;
+ writel(reg, &dp_regs->int_sta_mask);
+
+ return;
+}
+
+unsigned int exynos_dp_get_plug_in_status(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->sys_ctl3);
+ if (reg & HPD_STATUS)
+ return 0;
+
+ return -1;
+}
+
+unsigned int exynos_dp_detect_hpd(void)
+{
+ int timeout_loop = DP_TIMEOUT_LOOP_COUNT;
+
+ mdelay(2);
+
+ while (exynos_dp_get_plug_in_status() != 0) {
+ if (timeout_loop == 0)
+ return -EINVAL;
+ mdelay(10);
+ timeout_loop--;
+ }
+
+ return EXYNOS_DP_SUCCESS;
+}
+
+unsigned int exynos_dp_start_aux_transaction(void)
+{
+ unsigned int reg;
+ unsigned int ret = 0;
+ unsigned int retry_cnt;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Enable AUX CH operation */
+ reg = readl(&dp_regs->aux_ch_ctl2);
+ reg |= AUX_EN;
+ writel(reg, &dp_regs->aux_ch_ctl2);
+
+ retry_cnt = 10;
+ while (retry_cnt) {
+ reg = readl(&dp_regs->int_sta);
+ if (!(reg & RPLY_RECEIV)) {
+ if (retry_cnt == 0) {
+ printf("DP Reply Timeout!!\n");
+ ret = -EAGAIN;
+ return ret;
+ }
+ mdelay(1);
+ retry_cnt--;
+ } else
+ break;
+ }
+
+ /* Clear interrupt source for AUX CH command reply */
+ writel(reg, &dp_regs->int_sta);
+
+ /* Clear interrupt source for AUX CH access error */
+ reg = readl(&dp_regs->int_sta);
+ if (reg & AUX_ERR) {
+ printf("DP Aux Access Error\n");
+ writel(AUX_ERR, &dp_regs->int_sta);
+ ret = -EAGAIN;
+ return ret;
+ }
+
+ /* Check AUX CH error access status */
+ reg = readl(&dp_regs->aux_ch_sta);
+ if ((reg & AUX_STATUS_MASK) != 0) {
+ debug("DP AUX CH error happens: %x\n", reg & AUX_STATUS_MASK);
+ ret = -EAGAIN;
+ return ret;
+ }
+
+ return EXYNOS_DP_SUCCESS;
+}
+
+unsigned int exynos_dp_write_byte_to_dpcd(unsigned int reg_addr,
+ unsigned char data)
+{
+ unsigned int reg, ret;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, &dp_regs->buffer_data_ctl);
+
+ /* Select DPCD device address */
+ reg = AUX_ADDR_7_0(reg_addr);
+ writel(reg, &dp_regs->aux_addr_7_0);
+ reg = AUX_ADDR_15_8(reg_addr);
+ writel(reg, &dp_regs->aux_addr_15_8);
+ reg = AUX_ADDR_19_16(reg_addr);
+ writel(reg, &dp_regs->aux_addr_19_16);
+
+ /* Write data buffer */
+ reg = (unsigned int)data;
+ writel(reg, &dp_regs->buf_data0);
+
+ /*
+ * Set DisplayPort transaction and write 1 byte
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+ writel(reg, &dp_regs->aux_ch_ctl1);
+
+ /* Start AUX transaction */
+ ret = exynos_dp_start_aux_transaction();
+ if (ret != EXYNOS_DP_SUCCESS) {
+ printf("DP Aux transaction failed\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+unsigned int exynos_dp_read_byte_from_dpcd(unsigned int reg_addr,
+ unsigned char *data)
+{
+ unsigned int reg;
+ int retval;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, &dp_regs->buffer_data_ctl);
+
+ /* Select DPCD device address */
+ reg = AUX_ADDR_7_0(reg_addr);
+ writel(reg, &dp_regs->aux_addr_7_0);
+ reg = AUX_ADDR_15_8(reg_addr);
+ writel(reg, &dp_regs->aux_addr_15_8);
+ reg = AUX_ADDR_19_16(reg_addr);
+ writel(reg, &dp_regs->aux_addr_19_16);
+
+ /*
+ * Set DisplayPort transaction and read 1 byte
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
+ writel(reg, &dp_regs->aux_ch_ctl1);
+
+ /* Start AUX transaction */
+ retval = exynos_dp_start_aux_transaction();
+ if (!retval)
+ debug("DP Aux Transaction fail!\n");
+
+ /* Read data buffer */
+ reg = readl(&dp_regs->buf_data0);
+ *data = (unsigned char)(reg & 0xff);
+
+ return retval;
+}
+
+unsigned int exynos_dp_write_bytes_to_dpcd(unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[])
+{
+ unsigned int reg;
+ unsigned int start_offset;
+ unsigned int cur_data_count;
+ unsigned int cur_data_idx;
+ unsigned int retry_cnt;
+ unsigned int ret = 0;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, &dp_regs->buffer_data_ctl);
+
+ start_offset = 0;
+ while (start_offset < count) {
+ /* Buffer size of AUX CH is 16 * 4bytes */
+ if ((count - start_offset) > 16)
+ cur_data_count = 16;
+ else
+ cur_data_count = count - start_offset;
+
+ retry_cnt = 5;
+ while (retry_cnt) {
+ /* Select DPCD device address */
+ reg = AUX_ADDR_7_0(reg_addr + start_offset);
+ writel(reg, &dp_regs->aux_addr_7_0);
+ reg = AUX_ADDR_15_8(reg_addr + start_offset);
+ writel(reg, &dp_regs->aux_addr_15_8);
+ reg = AUX_ADDR_19_16(reg_addr + start_offset);
+ writel(reg, &dp_regs->aux_addr_19_16);
+
+ for (cur_data_idx = 0; cur_data_idx < cur_data_count;
+ cur_data_idx++) {
+ reg = data[start_offset + cur_data_idx];
+ writel(reg, (unsigned int)&dp_regs->buf_data0 +
+ (4 * cur_data_idx));
+ }
+ /*
+ * Set DisplayPort transaction and write
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_LENGTH(cur_data_count) |
+ AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+ writel(reg, &dp_regs->aux_ch_ctl1);
+
+ /* Start AUX transaction */
+ ret = exynos_dp_start_aux_transaction();
+ if (ret != EXYNOS_DP_SUCCESS) {
+ if (retry_cnt == 0) {
+ printf("DP Aux Transaction failed\n");
+ return ret;
+ }
+ retry_cnt--;
+ } else
+ break;
+ }
+ start_offset += cur_data_count;
+ }
+
+ return ret;
+}
+
+unsigned int exynos_dp_read_bytes_from_dpcd(unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[])
+{
+ unsigned int reg;
+ unsigned int start_offset;
+ unsigned int cur_data_count;
+ unsigned int cur_data_idx;
+ unsigned int retry_cnt;
+ unsigned int ret = 0;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, &dp_regs->buffer_data_ctl);
+
+ start_offset = 0;
+ while (start_offset < count) {
+ /* Buffer size of AUX CH is 16 * 4bytes */
+ if ((count - start_offset) > 16)
+ cur_data_count = 16;
+ else
+ cur_data_count = count - start_offset;
+
+ retry_cnt = 5;
+ while (retry_cnt) {
+ /* Select DPCD device address */
+ reg = AUX_ADDR_7_0(reg_addr + start_offset);
+ writel(reg, &dp_regs->aux_addr_7_0);
+ reg = AUX_ADDR_15_8(reg_addr + start_offset);
+ writel(reg, &dp_regs->aux_addr_15_8);
+ reg = AUX_ADDR_19_16(reg_addr + start_offset);
+ writel(reg, &dp_regs->aux_addr_19_16);
+ /*
+ * Set DisplayPort transaction and read
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_LENGTH(cur_data_count) |
+ AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
+ writel(reg, &dp_regs->aux_ch_ctl1);
+
+ /* Start AUX transaction */
+ ret = exynos_dp_start_aux_transaction();
+ if (ret != EXYNOS_DP_SUCCESS) {
+ if (retry_cnt == 0) {
+ printf("DP Aux Transaction failed\n");
+ return ret;
+ }
+ retry_cnt--;
+ } else
+ break;
+ }
+
+ for (cur_data_idx = 0; cur_data_idx < cur_data_count;
+ cur_data_idx++) {
+ reg = readl((unsigned int)&dp_regs->buf_data0 +
+ 4 * cur_data_idx);
+ data[start_offset + cur_data_idx] = (unsigned char)reg;
+ }
+
+ start_offset += cur_data_count;
+ }
+
+ return ret;
+}
+
+int exynos_dp_select_i2c_device(unsigned int device_addr,
+ unsigned int reg_addr)
+{
+ unsigned int reg;
+ int retval;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Set EDID device address */
+ reg = device_addr;
+ writel(reg, &dp_regs->aux_addr_7_0);
+ writel(0x0, &dp_regs->aux_addr_15_8);
+ writel(0x0, &dp_regs->aux_addr_19_16);
+
+ /* Set offset from base address of EDID device */
+ writel(reg_addr, &dp_regs->buf_data0);
+
+ /*
+ * Set I2C transaction and write address
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
+ AUX_TX_COMM_WRITE;
+ writel(reg, &dp_regs->aux_ch_ctl1);
+
+ /* Start AUX transaction */
+ retval = exynos_dp_start_aux_transaction();
+ if (retval != 0)
+ printf("%s: DP Aux Transaction fail!\n", __func__);
+
+ return retval;
+}
+
+int exynos_dp_read_byte_from_i2c(unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int *data)
+{
+ unsigned int reg;
+ int i;
+ int retval;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ for (i = 0; i < 10; i++) {
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, &dp_regs->buffer_data_ctl);
+
+ /* Select EDID device */
+ retval = exynos_dp_select_i2c_device(device_addr, reg_addr);
+ if (retval != 0) {
+ printf("DP Select EDID device fail. retry !\n");
+ continue;
+ }
+
+ /*
+ * Set I2C transaction and read data
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_TX_COMM_I2C_TRANSACTION |
+ AUX_TX_COMM_READ;
+ writel(reg, &dp_regs->aux_ch_ctl1);
+
+ /* Start AUX transaction */
+ retval = exynos_dp_start_aux_transaction();
+ if (retval != EXYNOS_DP_SUCCESS)
+ printf("%s: DP Aux Transaction fail!\n", __func__);
+ }
+
+ /* Read data */
+ if (retval == 0)
+ *data = readl(&dp_regs->buf_data0);
+
+ return retval;
+}
+
+int exynos_dp_read_bytes_from_i2c(unsigned int device_addr,
+ unsigned int reg_addr, unsigned int count, unsigned char edid[])
+{
+ unsigned int reg;
+ unsigned int i, j;
+ unsigned int cur_data_idx;
+ unsigned int defer = 0;
+ int retval = 0;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ for (i = 0; i < count; i += 16) { /* use 16 burst */
+ for (j = 0; j < 100; j++) {
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, &dp_regs->buffer_data_ctl);
+
+ /* Set normal AUX CH command */
+ reg = readl(&dp_regs->aux_ch_ctl2);
+ reg &= ~ADDR_ONLY;
+ writel(reg, &dp_regs->aux_ch_ctl2);
+
+ /*
+ * If Rx sends defer, Tx sends only reads
+ * request without sending addres
+ */
+ if (!defer)
+ retval =
+ exynos_dp_select_i2c_device(device_addr,
+ reg_addr + i);
+ else
+ defer = 0;
+
+ if (retval == EXYNOS_DP_SUCCESS) {
+ /*
+ * Set I2C transaction and write data
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_LENGTH(16) |
+ AUX_TX_COMM_I2C_TRANSACTION |
+ AUX_TX_COMM_READ;
+ writel(reg, &dp_regs->aux_ch_ctl1);
+
+ /* Start AUX transaction */
+ retval = exynos_dp_start_aux_transaction();
+ if (retval == 0)
+ break;
+ else
+ printf("DP Aux Transaction fail!\n");
+ }
+ /* Check if Rx sends defer */
+ reg = readl(&dp_regs->aux_rx_comm);
+ if (reg == AUX_RX_COMM_AUX_DEFER ||
+ reg == AUX_RX_COMM_I2C_DEFER) {
+ printf("DP Defer: %d\n\n", reg);
+ defer = 1;
+ }
+ }
+
+ for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
+ reg = readl((unsigned int)&dp_regs->buf_data0
+ + 4 * cur_data_idx);
+ edid[i + cur_data_idx] = (unsigned char)reg;
+ }
+ }
+
+ return retval;
+}
+
+void exynos_dp_reset_macro(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->phy_test);
+ reg |= MACRO_RST;
+ writel(reg, &dp_regs->phy_test);
+
+ /* 10 us is the minimum Macro reset time. */
+ mdelay(1);
+
+ reg &= ~MACRO_RST;
+ writel(reg, &dp_regs->phy_test);
+}
+
+void exynos_dp_set_link_bandwidth(unsigned char bwtype)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = (unsigned int)bwtype;
+
+ /* Set bandwidth to 2.7G or 1.62G */
+ if ((bwtype == DP_LANE_BW_1_62) || (bwtype == DP_LANE_BW_2_70))
+ writel(reg, &dp_regs->link_bw_set);
+}
+
+unsigned char exynos_dp_get_link_bandwidth(void)
+{
+ unsigned char ret;
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->link_bw_set);
+ ret = (unsigned char)reg;
+
+ return ret;
+}
+
+void exynos_dp_set_lane_count(unsigned char count)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = (unsigned int)count;
+
+ if ((count == DP_LANE_CNT_1) || (count == DP_LANE_CNT_2) ||
+ (count == DP_LANE_CNT_4))
+ writel(reg, &dp_regs->lane_count_set);
+}
+
+unsigned int exynos_dp_get_lane_count(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->lane_count_set);
+
+ return reg;
+}
+
+unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt)
+{
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+ unsigned int reg_list[DP_LANE_CNT_4] = {
+ (unsigned int)&dp_regs->ln0_link_training_ctl,
+ (unsigned int)&dp_regs->ln1_link_training_ctl,
+ (unsigned int)&dp_regs->ln2_link_training_ctl,
+ (unsigned int)&dp_regs->ln3_link_training_ctl,
+ };
+
+ return readl(reg_list[lanecnt]);
+}
+
+void exynos_dp_set_lanex_pre_emphasis(unsigned char request_val,
+ unsigned char lanecnt)
+{
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+ unsigned int reg_list[DP_LANE_CNT_4] = {
+ (unsigned int)&dp_regs->ln0_link_training_ctl,
+ (unsigned int)&dp_regs->ln1_link_training_ctl,
+ (unsigned int)&dp_regs->ln2_link_training_ctl,
+ (unsigned int)&dp_regs->ln3_link_training_ctl,
+ };
+
+ writel(request_val, reg_list[lanecnt]);
+}
+
+void exynos_dp_set_lane_pre_emphasis(unsigned int level, unsigned char lanecnt)
+{
+ unsigned char i;
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+ unsigned int reg_list[DP_LANE_CNT_4] = {
+ (unsigned int)&dp_regs->ln0_link_training_ctl,
+ (unsigned int)&dp_regs->ln1_link_training_ctl,
+ (unsigned int)&dp_regs->ln2_link_training_ctl,
+ (unsigned int)&dp_regs->ln3_link_training_ctl,
+ };
+ unsigned int reg_shift[DP_LANE_CNT_4] = {
+ PRE_EMPHASIS_SET_0_SHIFT,
+ PRE_EMPHASIS_SET_1_SHIFT,
+ PRE_EMPHASIS_SET_2_SHIFT,
+ PRE_EMPHASIS_SET_3_SHIFT
+ };
+
+ for (i = 0; i < lanecnt; i++) {
+ reg = level << reg_shift[i];
+ writel(reg, reg_list[i]);
+ }
+}
+
+void exynos_dp_set_training_pattern(unsigned int pattern)
+{
+ unsigned int reg = 0;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ switch (pattern) {
+ case PRBS7:
+ reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
+ break;
+ case D10_2:
+ reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
+ break;
+ case TRAINING_PTN1:
+ reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
+ break;
+ case TRAINING_PTN2:
+ reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
+ break;
+ case DP_NONE:
+ reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_DISABLE |
+ SW_TRAINING_PATTERN_SET_NORMAL;
+ break;
+ default:
+ break;
+ }
+
+ writel(reg, &dp_regs->training_ptn_set);
+}
+
+void exynos_dp_enable_enhanced_mode(unsigned char enable)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->sys_ctl4);
+ reg &= ~ENHANCED;
+
+ if (enable)
+ reg |= ENHANCED;
+
+ writel(reg, &dp_regs->sys_ctl4);
+}
+
+void exynos_dp_enable_scrambling(unsigned int enable)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->training_ptn_set);
+ reg &= ~(SCRAMBLING_DISABLE);
+
+ if (!enable)
+ reg |= SCRAMBLING_DISABLE;
+
+ writel(reg, &dp_regs->training_ptn_set);
+}
+
+int exynos_dp_init_video(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Clear VID_CLK_CHG[1] and VID_FORMAT_CHG[3] and VSYNC_DET[7] */
+ reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
+ writel(reg, &dp_regs->common_int_sta1);
+
+ /* I_STRM__CLK detect : DE_CTL : Auto detect */
+ reg &= ~DET_CTRL;
+ writel(reg, &dp_regs->sys_ctl1);
+
+ return 0;
+}
+
+void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Video Slave mode setting */
+ reg = readl(&dp_regs->func_en1);
+ reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N);
+ reg |= MASTER_VID_FUNC_EN_N;
+ writel(reg, &dp_regs->func_en1);
+
+ /* Configure Interlaced for slave mode video */
+ reg = readl(&dp_regs->video_ctl10);
+ reg &= ~INTERACE_SCAN_CFG;
+ reg |= (video_info->interlaced << INTERACE_SCAN_CFG_SHIFT);
+ writel(reg, &dp_regs->video_ctl10);
+
+ /* Configure V sync polarity for slave mode video */
+ reg = readl(&dp_regs->video_ctl10);
+ reg &= ~VSYNC_POLARITY_CFG;
+ reg |= (video_info->v_sync_polarity << V_S_POLARITY_CFG_SHIFT);
+ writel(reg, &dp_regs->video_ctl10);
+
+ /* Configure H sync polarity for slave mode video */
+ reg = readl(&dp_regs->video_ctl10);
+ reg &= ~HSYNC_POLARITY_CFG;
+ reg |= (video_info->h_sync_polarity << H_S_POLARITY_CFG_SHIFT);
+ writel(reg, &dp_regs->video_ctl10);
+
+ /*Set video mode to slave mode */
+ reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
+ writel(reg, &dp_regs->soc_general_ctl);
+}
+
+void exynos_dp_set_video_color_format(struct edp_video_info *video_info)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Configure the input color depth, color space, dynamic range */
+ reg = (video_info->dynamic_range << IN_D_RANGE_SHIFT) |
+ (video_info->color_depth << IN_BPC_SHIFT) |
+ (video_info->color_space << IN_COLOR_F_SHIFT);
+ writel(reg, &dp_regs->video_ctl2);
+
+ /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
+ reg = readl(&dp_regs->video_ctl3);
+ reg &= ~IN_YC_COEFFI_MASK;
+ if (video_info->ycbcr_coeff)
+ reg |= IN_YC_COEFFI_ITU709;
+ else
+ reg |= IN_YC_COEFFI_ITU601;
+ writel(reg, &dp_regs->video_ctl3);
+}
+
+int exynos_dp_config_video_bist(struct edp_device_info *edp_info)
+{
+ unsigned int reg;
+ unsigned int bist_type = 0;
+ struct edp_video_info video_info = edp_info->video_info;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* For master mode, you don't need to set the video format */
+ if (video_info.master_mode == 0) {
+ writel(TOTAL_LINE_CFG_L(edp_info->disp_info.v_total),
+ &dp_regs->total_ln_cfg_l);
+ writel(TOTAL_LINE_CFG_H(edp_info->disp_info.v_total),
+ &dp_regs->total_ln_cfg_h);
+ writel(ACTIVE_LINE_CFG_L(edp_info->disp_info.v_res),
+ &dp_regs->active_ln_cfg_l);
+ writel(ACTIVE_LINE_CFG_H(edp_info->disp_info.v_res),
+ &dp_regs->active_ln_cfg_h);
+ writel(edp_info->disp_info.v_sync_width,
+ &dp_regs->vsw_cfg);
+ writel(edp_info->disp_info.v_back_porch,
+ &dp_regs->vbp_cfg);
+ writel(edp_info->disp_info.v_front_porch,
+ &dp_regs->vfp_cfg);
+
+ writel(TOTAL_PIXEL_CFG_L(edp_info->disp_info.h_total),
+ &dp_regs->total_pix_cfg_l);
+ writel(TOTAL_PIXEL_CFG_H(edp_info->disp_info.h_total),
+ &dp_regs->total_pix_cfg_h);
+ writel(ACTIVE_PIXEL_CFG_L(edp_info->disp_info.h_res),
+ &dp_regs->active_pix_cfg_l);
+ writel(ACTIVE_PIXEL_CFG_H(edp_info->disp_info.h_res),
+ &dp_regs->active_pix_cfg_h);
+ writel(H_F_PORCH_CFG_L(edp_info->disp_info.h_front_porch),
+ &dp_regs->hfp_cfg_l);
+ writel(H_F_PORCH_CFG_H(edp_info->disp_info.h_front_porch),
+ &dp_regs->hfp_cfg_h);
+ writel(H_SYNC_PORCH_CFG_L(edp_info->disp_info.h_sync_width),
+ &dp_regs->hsw_cfg_l);
+ writel(H_SYNC_PORCH_CFG_H(edp_info->disp_info.h_sync_width),
+ &dp_regs->hsw_cfg_h);
+ writel(H_B_PORCH_CFG_L(edp_info->disp_info.h_back_porch),
+ &dp_regs->hbp_cfg_l);
+ writel(H_B_PORCH_CFG_H(edp_info->disp_info.h_back_porch),
+ &dp_regs->hbp_cfg_h);
+
+ /*
+ * Set SLAVE_I_SCAN_CFG[2], VSYNC_P_CFG[1],
+ * HSYNC_P_CFG[0] properly
+ */
+ reg = (video_info.interlaced << INTERACE_SCAN_CFG_SHIFT |
+ video_info.v_sync_polarity << V_S_POLARITY_CFG_SHIFT |
+ video_info.h_sync_polarity << H_S_POLARITY_CFG_SHIFT);
+ writel(reg, &dp_regs->video_ctl10);
+ }
+
+ /* BIST color bar width set--set to each bar is 32 pixel width */
+ switch (video_info.bist_pattern) {
+ case COLORBAR_32:
+ bist_type = BIST_WIDTH_BAR_32_PIXEL |
+ BIST_TYPE_COLOR_BAR;
+ break;
+ case COLORBAR_64:
+ bist_type = BIST_WIDTH_BAR_64_PIXEL |
+ BIST_TYPE_COLOR_BAR;
+ break;
+ case WHITE_GRAY_BALCKBAR_32:
+ bist_type = BIST_WIDTH_BAR_32_PIXEL |
+ BIST_TYPE_WHITE_GRAY_BLACK_BAR;
+ break;
+ case WHITE_GRAY_BALCKBAR_64:
+ bist_type = BIST_WIDTH_BAR_64_PIXEL |
+ BIST_TYPE_WHITE_GRAY_BLACK_BAR;
+ break;
+ case MOBILE_WHITEBAR_32:
+ bist_type = BIST_WIDTH_BAR_32_PIXEL |
+ BIST_TYPE_MOBILE_WHITE_BAR;
+ break;
+ case MOBILE_WHITEBAR_64:
+ bist_type = BIST_WIDTH_BAR_64_PIXEL |
+ BIST_TYPE_MOBILE_WHITE_BAR;
+ break;
+ default:
+ return -1;
+ }
+
+ reg = bist_type;
+ writel(reg, &dp_regs->video_ctl4);
+
+ return 0;
+}
+
+unsigned int exynos_dp_is_slave_video_stream_clock_on(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Update Video stream clk detect status */
+ reg = readl(&dp_regs->sys_ctl1);
+ writel(reg, &dp_regs->sys_ctl1);
+
+ reg = readl(&dp_regs->sys_ctl1);
+
+ if (!(reg & DET_STA)) {
+ debug("DP Input stream clock not detected.\n");
+ return -EIO;
+ }
+
+ return EXYNOS_DP_SUCCESS;
+}
+
+void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value,
+ unsigned int n_value)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ if (type == REGISTER_M) {
+ reg = readl(&dp_regs->sys_ctl4);
+ reg |= FIX_M_VID;
+ writel(reg, &dp_regs->sys_ctl4);
+ reg = M_VID0_CFG(m_value);
+ writel(reg, &dp_regs->m_vid0);
+ reg = M_VID1_CFG(m_value);
+ writel(reg, &dp_regs->m_vid1);
+ reg = M_VID2_CFG(m_value);
+ writel(reg, &dp_regs->m_vid2);
+
+ reg = N_VID0_CFG(n_value);
+ writel(reg, &dp_regs->n_vid0);
+ reg = N_VID1_CFG(n_value);
+ writel(reg, &dp_regs->n_vid1);
+ reg = N_VID2_CFG(n_value);
+ writel(reg, &dp_regs->n_vid2);
+ } else {
+ reg = readl(&dp_regs->sys_ctl4);
+ reg &= ~FIX_M_VID;
+ writel(reg, &dp_regs->sys_ctl4);
+ }
+}
+
+void exynos_dp_set_video_timing_mode(unsigned int type)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->video_ctl10);
+ reg &= ~FORMAT_SEL;
+
+ if (type != VIDEO_TIMING_FROM_CAPTURE)
+ reg |= FORMAT_SEL;
+
+ writel(reg, &dp_regs->video_ctl10);
+}
+
+void exynos_dp_enable_video_master(unsigned int enable)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ reg = readl(&dp_regs->soc_general_ctl);
+ if (enable) {
+ reg &= ~VIDEO_MODE_MASK;
+ reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE;
+ } else {
+ reg &= ~VIDEO_MODE_MASK;
+ reg |= VIDEO_MODE_SLAVE_MODE;
+ }
+
+ writel(reg, &dp_regs->soc_general_ctl);
+}
+
+void exynos_dp_start_video(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Enable Video input and disable Mute */
+ reg = readl(&dp_regs->video_ctl1);
+ reg |= VIDEO_EN;
+ writel(reg, &dp_regs->video_ctl1);
+}
+
+unsigned int exynos_dp_is_video_stream_on(void)
+{
+ unsigned int reg;
+ struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp();
+
+ /* Update STRM_VALID */
+ reg = readl(&dp_regs->sys_ctl3);
+ writel(reg, &dp_regs->sys_ctl3);
+
+ reg = readl(&dp_regs->sys_ctl3);
+ if (!(reg & STRM_VALID))
+ return -EIO;
+
+ return EXYNOS_DP_SUCCESS;
+}
--- /dev/null
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _EXYNOS_EDP_LOWLEVEL_H
+#define _EXYNOS_EDP_LOWLEVEL_H
+
+void exynos_dp_enable_video_bist(unsigned int enable);
+void exynos_dp_enable_video_mute(unsigned int enable);
+void exynos_dp_reset(void);
+void exynos_dp_enable_sw_func(unsigned int enable);
+unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable);
+unsigned int exynos_dp_get_pll_lock_status(void);
+int exynos_dp_init_analog_func(void);
+void exynos_dp_init_hpd(void);
+void exynos_dp_init_aux(void);
+void exynos_dp_config_interrupt(void);
+unsigned int exynos_dp_get_plug_in_status(void);
+unsigned int exynos_dp_detect_hpd(void);
+unsigned int exynos_dp_start_aux_transaction(void);
+unsigned int exynos_dp_write_byte_to_dpcd(unsigned int reg_addr,
+ unsigned char data);
+unsigned int exynos_dp_read_byte_from_dpcd(unsigned int reg_addr,
+ unsigned char *data);
+unsigned int exynos_dp_write_bytes_to_dpcd(unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[]);
+unsigned int exynos_dp_read_bytes_from_dpcd( unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[]);
+int exynos_dp_select_i2c_device( unsigned int device_addr,
+ unsigned int reg_addr);
+int exynos_dp_read_byte_from_i2c(unsigned int device_addr,
+ unsigned int reg_addr, unsigned int *data);
+int exynos_dp_read_bytes_from_i2c(unsigned int device_addr,
+ unsigned int reg_addr, unsigned int count,
+ unsigned char edid[]);
+void exynos_dp_reset_macro(void);
+void exynos_dp_set_link_bandwidth(unsigned char bwtype);
+unsigned char exynos_dp_get_link_bandwidth(void);
+void exynos_dp_set_lane_count(unsigned char count);
+unsigned int exynos_dp_get_lane_count(void);
+unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt);
+void exynos_dp_set_lane_pre_emphasis(unsigned int level,
+ unsigned char lanecnt);
+void exynos_dp_set_lanex_pre_emphasis(unsigned char request_val,
+ unsigned char lanecnt);
+void exynos_dp_set_training_pattern(unsigned int pattern);
+void exynos_dp_enable_enhanced_mode(unsigned char enable);
+void exynos_dp_enable_scrambling(unsigned int enable);
+int exynos_dp_init_video(void);
+void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info);
+void exynos_dp_set_video_color_format(struct edp_video_info *video_info);
+int exynos_dp_config_video_bist(struct edp_device_info *edp_info);
+unsigned int exynos_dp_is_slave_video_stream_clock_on(void);
+void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value,
+ unsigned int n_value);
+void exynos_dp_set_video_timing_mode(unsigned int type);
+void exynos_dp_enable_video_master(unsigned int enable);
+void exynos_dp_start_video(void);
+unsigned int exynos_dp_is_video_stream_on(void);
+
+#endif /* _EXYNOS_DP_LOWLEVEL_H */
projects / project / bcm63xx / u-boot.git / commitdiff