* MP-table.
*/
DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
+int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 };
static int mp_current_pci_id = 0;
/* I/O APIC entries */
int nr_ioapics;
unsigned long mp_lapic_addr = 0;
-
-
/* Processor that is doing the boot up */
unsigned int boot_cpu_physical_apicid = -1U;
EXPORT_SYMBOL(boot_cpu_physical_apicid);
physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
- = { [0 ... NR_CPUS-1] = BAD_APICID };
+ = {[0 ... NR_CPUS - 1] = BAD_APICID };
void *x86_bios_cpu_apicid_early_ptr;
DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-
/*
* Intel MP BIOS table parsing routines:
*/
if (num_processors >= NR_CPUS) {
printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
- " Processor ignored.\n", NR_CPUS);
+ " Processor ignored.\n", NR_CPUS);
return;
}
if (num_processors >= maxcpus) {
printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
- " Processor ignored.\n", maxcpus);
+ " Processor ignored.\n", maxcpus);
return;
}
cpu = first_cpu(tmp_map);
physid_set(m->mpc_apicid, phys_cpu_present_map);
- if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- /*
+ if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
+ /*
* x86_bios_cpu_apicid is required to have processors listed
- * in same order as logical cpu numbers. Hence the first
- * entry is BSP, and so on.
- */
+ * in same order as logical cpu numbers. Hence the first
+ * entry is BSP, and so on.
+ */
cpu = 0;
- }
+ }
/* are we being called early in kernel startup? */
if (x86_cpu_to_apicid_early_ptr) {
u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
cpu_set(cpu, cpu_present_map);
}
-static void __init MP_bus_info (struct mpc_config_bus *m)
+static void __init MP_bus_info(struct mpc_config_bus *m)
{
char str[7];
{
if (nr_ioapics >= MAX_IO_APICS) {
printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
- "(found %d)\n", MAX_IO_APICS, nr_ioapics);
+ "(found %d)\n", MAX_IO_APICS, nr_ioapics);
panic("Recompile kernel with bigger MAX_IO_APICS!\n");
}
if (!address) {
printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
- " found in table, skipping!\n");
+ " found in table, skipping!\n");
return 1;
}
return 0;
}
-static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
+static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
{
if (!(m->mpc_flags & MPC_APIC_USABLE))
return;
- printk("I/O APIC #%d at 0x%X.\n",
- m->mpc_apicid, m->mpc_apicaddr);
+ printk(KERN_INFO "I/O APIC #%d at 0x%X.\n", m->mpc_apicid,
+ m->mpc_apicaddr);
if (bad_ioapic(m->mpc_apicaddr))
return;
nr_ioapics++;
}
-static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
+static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
{
- mp_irqs [mp_irq_entries] = *m;
+ mp_irqs[mp_irq_entries] = *m;
Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
" IRQ %02x, APIC ID %x, APIC INT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
- m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
+ m->mpc_irqtype, m->mpc_irqflag & 3,
+ (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
+ m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
if (++mp_irq_entries >= MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!!\n");
}
-static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
+static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
{
Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
- m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
+ m->mpc_irqtype, m->mpc_irqflag & 3,
+ (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
+ m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
}
/*
static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
{
char str[16];
- int count=sizeof(*mpc);
- unsigned char *mpt=((unsigned char *)mpc)+count;
-
- if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
- printk("MPTABLE: bad signature [%c%c%c%c]!\n",
- mpc->mpc_signature[0],
- mpc->mpc_signature[1],
- mpc->mpc_signature[2],
- mpc->mpc_signature[3]);
+ int count = sizeof(*mpc);
+ unsigned char *mpt = ((unsigned char *)mpc) + count;
+
+ if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) {
+ printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n",
+ mpc->mpc_signature[0],
+ mpc->mpc_signature[1],
+ mpc->mpc_signature[2], mpc->mpc_signature[3]);
return 0;
}
- if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
- printk("MPTABLE: checksum error!\n");
+ if (mpf_checksum((unsigned char *)mpc, mpc->mpc_length)) {
+ printk(KERN_ERR "MPTABLE: checksum error!\n");
return 0;
}
- if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
+ if (mpc->mpc_spec != 0x01 && mpc->mpc_spec != 0x04) {
printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
- mpc->mpc_spec);
+ mpc->mpc_spec);
return 0;
}
if (!mpc->mpc_lapic) {
printk(KERN_ERR "MPTABLE: null local APIC address!\n");
return 0;
}
- memcpy(str,mpc->mpc_oem,8);
+ memcpy(str, mpc->mpc_oem, 8);
str[8] = 0;
- printk(KERN_INFO "MPTABLE: OEM ID: %s ",str);
+ printk(KERN_INFO "MPTABLE: OEM ID: %s ", str);
- memcpy(str,mpc->mpc_productid,12);
+ memcpy(str, mpc->mpc_productid, 12);
str[12] = 0;
- printk("MPTABLE: Product ID: %s ",str);
+ printk(KERN_INFO "MPTABLE: Product ID: %s ", str);
- printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic);
+ printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic);
/* save the local APIC address, it might be non-default */
if (!acpi_lapic)
return 1;
/*
- * Now process the configuration blocks.
+ * Now process the configuration blocks.
*/
while (count < mpc->mpc_length) {
- switch(*mpt) {
- case MP_PROCESSOR:
+ switch (*mpt) {
+ case MP_PROCESSOR:
{
- struct mpc_config_processor *m=
- (struct mpc_config_processor *)mpt;
+ struct mpc_config_processor *m =
+ (struct mpc_config_processor *)mpt;
if (!acpi_lapic)
MP_processor_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
}
- case MP_BUS:
+ case MP_BUS:
{
- struct mpc_config_bus *m=
- (struct mpc_config_bus *)mpt;
+ struct mpc_config_bus *m =
+ (struct mpc_config_bus *)mpt;
MP_bus_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
}
- case MP_IOAPIC:
+ case MP_IOAPIC:
{
- struct mpc_config_ioapic *m=
- (struct mpc_config_ioapic *)mpt;
+ struct mpc_config_ioapic *m =
+ (struct mpc_config_ioapic *)mpt;
MP_ioapic_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
}
- case MP_INTSRC:
+ case MP_INTSRC:
{
- struct mpc_config_intsrc *m=
- (struct mpc_config_intsrc *)mpt;
+ struct mpc_config_intsrc *m =
+ (struct mpc_config_intsrc *)mpt;
MP_intsrc_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
}
- case MP_LINTSRC:
+ case MP_LINTSRC:
{
- struct mpc_config_lintsrc *m=
- (struct mpc_config_lintsrc *)mpt;
+ struct mpc_config_lintsrc *m =
+ (struct mpc_config_lintsrc *)mpt;
MP_lintsrc_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
int ELCR_fallback = 0;
intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* conforming */
+ intsrc.mpc_irqflag = 0; /* conforming */
intsrc.mpc_srcbus = 0;
intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
* If it does, we assume it's valid.
*/
if (mpc_default_type == 5) {
- printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
+ printk(KERN_INFO "ISA/PCI bus type with no IRQ information... "
+ "falling back to ELCR\n");
- if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
- printk(KERN_ERR "ELCR contains invalid data... not using ELCR\n");
+ if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
+ ELCR_trigger(13))
+ printk(KERN_ERR "ELCR contains invalid data... "
+ "not using ELCR\n");
else {
- printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
+ printk(KERN_INFO
+ "Using ELCR to identify PCI interrupts\n");
ELCR_fallback = 1;
}
}
}
intsrc.mpc_srcbusirq = i;
- intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
+ intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
MP_intsrc_info(&intsrc);
}
intsrc.mpc_irqtype = mp_ExtINT;
intsrc.mpc_srcbusirq = 0;
- intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
+ intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
MP_intsrc_info(&intsrc);
}
bus.mpc_type = MP_BUS;
bus.mpc_busid = 0;
switch (mpc_default_type) {
- default:
- printk(KERN_ERR "???\nUnknown standard configuration %d\n",
- mpc_default_type);
- /* fall through */
- case 1:
- case 5:
- memcpy(bus.mpc_bustype, "ISA ", 6);
- break;
+ default:
+ printk(KERN_ERR "???\nUnknown standard configuration %d\n",
+ mpc_default_type);
+ /* fall through */
+ case 1:
+ case 5:
+ memcpy(bus.mpc_bustype, "ISA ", 6);
+ break;
}
MP_bus_info(&bus);
if (mpc_default_type > 4) {
construct_default_ioirq_mptable(mpc_default_type);
lintsrc.mpc_type = MP_LINTSRC;
- lintsrc.mpc_irqflag = 0; /* conforming */
+ lintsrc.mpc_irqflag = 0; /* conforming */
lintsrc.mpc_srcbusid = 0;
lintsrc.mpc_srcbusirq = 0;
lintsrc.mpc_destapic = MP_APIC_ALL;
*/
if (acpi_lapic && acpi_ioapic) {
printk(KERN_INFO "Using ACPI (MADT) for SMP configuration "
- "information\n");
+ "information\n");
return;
} else if (acpi_lapic)
printk(KERN_INFO "Using ACPI for processor (LAPIC) "
- "configuration information\n");
+ "configuration information\n");
printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
- mpf->mpf_specification);
+ mpf->mpf_specification);
/*
* Now see if we need to read further.
return;
}
- printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
+ printk(KERN_INFO "Default MP configuration #%d\n",
+ mpf->mpf_feature1);
construct_default_ISA_mptable(mpf->mpf_feature1);
} else if (mpf->mpf_physptr) {
*/
if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) {
smp_found_config = 0;
- printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
- printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
+ printk(KERN_ERR
+ "BIOS bug, MP table errors detected!...\n");
+ printk(KERN_ERR "... disabling SMP support. "
+ "(tell your hw vendor)\n");
return;
}
if (!mp_irq_entries) {
struct mpc_config_bus bus;
- printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
+ printk(KERN_ERR "BIOS bug, no explicit IRQ entries, "
+ "using default mptable. "
+ "(tell your hw vendor)\n");
bus.mpc_type = MP_BUS;
bus.mpc_busid = 0;
static int __init smp_scan_config(unsigned long base, unsigned long length,
unsigned reserve)
{
- extern void __bad_mpf_size(void);
+ extern void __bad_mpf_size(void);
unsigned int *bp = phys_to_virt(base);
struct intel_mp_floating *mpf;
- Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
+ Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length);
if (sizeof(*mpf) != 16)
__bad_mpf_size();
while (length > 0) {
mpf = (struct intel_mp_floating *)bp;
if ((*bp == SMP_MAGIC_IDENT) &&
- (mpf->mpf_length == 1) &&
- !mpf_checksum((unsigned char *)bp, 16) &&
- ((mpf->mpf_specification == 1)
- || (mpf->mpf_specification == 4)) ) {
+ (mpf->mpf_length == 1) &&
+ !mpf_checksum((unsigned char *)bp, 16) &&
+ ((mpf->mpf_specification == 1)
+ || (mpf->mpf_specification == 4))) {
smp_found_config = 1;
mpf_found = mpf;
* 3) Scan the 64K of bios
*/
if (smp_scan_config(0x0, 0x400, reserve) ||
- smp_scan_config(639*0x400, 0x400, reserve) ||
- smp_scan_config(0xF0000, 0x10000, reserve))
+ smp_scan_config(639 * 0x400, 0x400, reserve) ||
+ smp_scan_config(0xF0000, 0x10000, reserve))
return;
/*
* If it is an SMP machine we should know now.
return;
/* If we have come this far, we did not find an MP table */
- printk(KERN_INFO "No mptable found.\n");
+ printk(KERN_INFO "No mptable found.\n");
}
void __init early_find_smp_config(void)
void __init mp_register_lapic_address(u64 address)
{
- mp_lapic_addr = (unsigned long) address;
+ mp_lapic_addr = (unsigned long)address;
set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
if (boot_cpu_physical_apicid == -1U)
boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
}
-void __cpuinit mp_register_lapic (u8 id, u8 enabled)
+void __cpuinit mp_register_lapic(u8 id, u8 enabled)
{
struct mpc_config_processor processor;
- int boot_cpu = 0;
-
+ int boot_cpu = 0;
+
if (id == boot_cpu_physical_apicid)
boot_cpu = 1;
#define MP_MAX_IOAPIC_PIN 127
static struct mp_ioapic_routing {
- int apic_id;
- int gsi_start;
- int gsi_end;
- u32 pin_programmed[4];
+ int apic_id;
+ int gsi_start;
+ int gsi_end;
+ u32 pin_programmed[4];
} mp_ioapic_routing[MAX_IO_APICS];
static int mp_find_ioapic(int gsi)
/* Find the IOAPIC that manages this GSI. */
for (i = 0; i < nr_ioapics; i++) {
if ((gsi >= mp_ioapic_routing[i].gsi_start)
- && (gsi <= mp_ioapic_routing[i].gsi_end))
+ && (gsi <= mp_ioapic_routing[i].gsi_end))
return i;
}
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
mp_ioapics[idx].mpc_apicver = 0;
-
+
/*
* Build basic IRQ lookup table to facilitate gsi->io_apic lookups
* and to prevent reprogramming of IOAPIC pins (PCI IRQs).
*/
mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
mp_ioapic_routing[idx].gsi_start = gsi_base;
- mp_ioapic_routing[idx].gsi_end = gsi_base +
- io_apic_get_redir_entries(idx);
+ mp_ioapic_routing[idx].gsi_end = gsi_base +
+ io_apic_get_redir_entries(idx);
printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, "
- "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
- mp_ioapics[idx].mpc_apicaddr,
- mp_ioapic_routing[idx].gsi_start,
- mp_ioapic_routing[idx].gsi_end);
+ "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
+ mp_ioapics[idx].mpc_apicaddr,
+ mp_ioapic_routing[idx].gsi_start,
+ mp_ioapic_routing[idx].gsi_end);
nr_ioapics++;
}
-void __init
-mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
+void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
{
struct mpc_config_intsrc intsrc;
- int ioapic = -1;
- int pin = -1;
+ int ioapic = -1;
+ int pin = -1;
/*
* Convert 'gsi' to 'ioapic.pin'.
intsrc.mpc_irqtype = mp_INT;
intsrc.mpc_irqflag = (trigger << 2) | polarity;
intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
- intsrc.mpc_dstirq = pin; /* INTIN# */
+ intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
+ intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
+ intsrc.mpc_dstirq = pin; /* INTIN# */
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
- intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+ Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
+ intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+ (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
mp_irqs[mp_irq_entries] = intsrc;
return;
intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* Conforming */
+ intsrc.mpc_irqflag = 0; /* Conforming */
intsrc.mpc_srcbus = MP_ISA_BUS;
intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
struct mpc_config_intsrc *irq = mp_irqs + idx;
/* Do we already have a mapping for this ISA IRQ? */
- if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
+ if (irq->mpc_srcbus == MP_ISA_BUS
+ && irq->mpc_srcbusirq == i)
break;
/* Do we already have a mapping for this IOAPIC pin */
if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
- (irq->mpc_dstirq == i))
+ (irq->mpc_dstirq == i))
break;
}
if (idx != mp_irq_entries) {
printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
- continue; /* IRQ already used */
+ continue; /* IRQ already used */
}
intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_srcbusirq = i; /* Identity mapped */
+ intsrc.mpc_srcbusirq = i; /* Identity mapped */
intsrc.mpc_dstirq = i;
Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
- "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
- intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
+ "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+ (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+ intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
intsrc.mpc_dstirq);
mp_irqs[mp_irq_entries] = intsrc;
idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
if (idx > 3) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
- ioapic_pin);
+ "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ ioapic_pin);
return gsi;
}
- if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
+ if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
return gsi;
}
- mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
+ mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit);
io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
return gsi;
}
-#endif /*CONFIG_ACPI*/
+#endif /* CONFIG_ACPI */
projects / openwrt / staging / blogic.git / commitdiff