--- /dev/null
+/*
+ * D-Link DAP-1330
+ *
+ * Copyright (c) 2013-2015 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017 Nicolò Veronese <nicveronese@gmail.com>
+ * Copyright (c) 2017 Federico Cappon <dududede371@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#define DAP_1330_GPIO_LED_GREEN_POWER 13
+#define DAP_1330_GPIO_LED_RED_POWER 3
+#define DAP_1330_GPIO_LED_GREEN_WIFI 14
+#define DAP_1330_GPIO_LED_RED_WIFI 11
+#define DAP_1330_GPIO_LED_SIGNAL1 15
+#define DAP_1330_GPIO_LED_SIGNAL2 16
+
+#define DAP_1330_GPIO_BTN_WPS 2
+#define DAP_1330_GPIO_BTN_RESET 17
+
+#define DAP_1330_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DAP_1330_KEYS_DEBOUNCE_INTERVAL (3 * DAP_1330_KEYS_POLL_INTERVAL)
+
+#define DAP1330_MAC_ADDR 0x1f020001
+
+#define DAP1330_WMAC_CALDATA_ADDR 0x1f010000
+#define DAP_1330_WMAC_CALDATA_OFFSET 0x1000
+
+static struct gpio_led dap_1330_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:green:power",
+ .gpio = DAP_1330_GPIO_LED_GREEN_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:red:power",
+ .gpio = DAP_1330_GPIO_LED_RED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:green:wifi",
+ .gpio = DAP_1330_GPIO_LED_GREEN_WIFI,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:red:wifi",
+ .gpio = DAP_1330_GPIO_LED_RED_WIFI,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:green:signal1",
+ .gpio = DAP_1330_GPIO_LED_SIGNAL1,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:green:signal2",
+ .gpio = DAP_1330_GPIO_LED_SIGNAL2,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dap_1330_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DAP_1330_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DAP_1330_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DAP_1330_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DAP_1330_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init dap_1330_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(DAP1330_WMAC_CALDATA_ADDR);
+ u8 *mac_ptr = (u8 *) KSEG1ADDR(DAP1330_MAC_ADDR);
+ u8 mac[ETH_ALEN];
+
+ ath79_parse_ascii_mac((char *) mac_ptr, mac);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dap_1330_leds_gpio),
+ dap_1330_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DAP_1330_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dap_1330_gpio_keys),
+ dap_1330_gpio_keys);
+
+ ath79_register_wmac(art + DAP_1330_WMAC_CALDATA_OFFSET, mac);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_DAP_1330_A1, "DAP-1330-A1",
+ "D-Link DAP-1330 Rev. A1", dap_1330_setup);
mv $@.imghdr $@
endef
+define Build/mkdapimg2
+ $(STAGING_DIR_HOST)/bin/mkdapimg2 \
+ -i $@ -o $@.new \
+ -s $(DAP_SIGNATURE) \
+ -v $(VERSION_DIST)-$(firstword $(subst -, ,$(REVISION))) \
+ -r Default \
+ $(if $(1),-k $(1))
+ mv $@.new $@
+endef
+
define Build/netgear-squashfs
rm -rf $@.fs $@.squashfs
mkdir -p $@.fs/image
endef
TARGET_DEVICES += qihoo-c301
+define Device/dap-1330-a1
+ DEVICE_TITLE := D-Link DAP-1330 rev. A1
+ DEVICE_PACKAGES := rssileds
+ BOARDNAME := DAP-1330-A1
+ IMAGES := factory.img sysupgrade.bin
+ IMAGE_SIZE := 7936k
+ IMAGE/factory.img := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkdapimg2 917504
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,64k(mp)ro,64k(config)ro,7936k(firmware)
+ DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1330
+endef
+TARGET_DEVICES += dap-1330-a1
+
define Device/dap-2695-a1
DEVICE_TITLE := D-Link DAP-2695 rev. A1
DEVICE_PACKAGES := ath10k-firmware-qca988x kmod-ath10k
projects / openwrt / staging / zorun.git / commitdiff