#include <status_led.h>
#include <sha1.h>
#include <asm/io.h>
+#include <net.h>
DECLARE_GLOBAL_DATA_PTR;
{
int ok_ethaddr, ok_eth1addr;
int ret;
- char buf[EEPROM_LEN];
- char mac[32];
+ uchar buf[EEPROM_LEN];
char *use_eeprom;
u16 checksumcrc16 = 0;
/* read the MACs from EEprom */
status_led_set (0, STATUS_LED_ON);
status_led_set (1, STATUS_LED_ON);
- ret = eeprom_read (CONFIG_SYS_I2C_EEPROM_ADDR, 0, (uchar *)buf, EEPROM_LEN);
+ ret = eeprom_read (CONFIG_SYS_I2C_EEPROM_ADDR, 0, buf, EEPROM_LEN);
if (ret == 0) {
- checksumcrc16 = cyg_crc16 ((uchar *)buf, EEPROM_LEN - 2);
+ checksumcrc16 = cyg_crc16 (buf, EEPROM_LEN - 2);
/* check, if the EEprom is programmed:
* - The Prefix(Byte 0,1,2) is equal to "ATR"
* - The checksum, stored in the last 2 Bytes, is correct
*/
- if ((strncmp (buf,"ATR",3) != 0) ||
+ if ((strncmp ((char *)buf,"ATR",3) != 0) ||
((checksumcrc16 >> 8) != buf[EEPROM_LEN - 2]) ||
((checksumcrc16 & 0xff) != buf[EEPROM_LEN - 1])) {
/* EEprom is not programmed */