ramips: add support for HiWiFi HC5861B

HiWiFi "Gee Enjoy1200" HC5861B is a dual-band router based on MediaTek MT7628AN
https://www.hiwifi.com/enjoy-view

Specifications:
- MediaTek MT7628AN 580MHz
- 128 MB DDR2 RAM
- 16 MB SPI Flash
- 2.4G MT7628AN 802.11bgn 2T2R 300Mbps
- 5G MT7612EN 802.11ac 2T2R 867Mbps
- 5x 10/100 Mbps Ethernet

Flash instruction:
1. Get SSH access to the router
2. SSH to router with `ssh -p 1022 root@192.168.199.1`, The SSH password is the same as the webconfig one
3. Upload OpenWrt sysupgrade firmware into the router's `/tmp` folder with SCP
4. Run `mtd write /tmp/<filename> firmware`
5. reboot

Everything is working

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index b64e9d14c56c4392ecd4ee138e46f50321be3170..4e90efd4e6d4857892caa0529a8b0b092bb52d38 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -240,6 +240,9 @@ hg255d)
        set_usb_led "$boardname:green:usb"
        ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
        ;;
+hiwifi,hc5861b)
+       set_wifi_led "$boardname:green:wlan2g"
+       ;;
 hpm)
        ucidef_set_led_default "power" "POWER" "$boardname:orange:power" "1"
        ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 3ae01448b513deb5a252a394785efc406dd13458..915c3584c59e831fa57e0ed118e3d594dea6db6b 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -199,6 +199,7 @@ ramips_setup_interfaces()
        gl-mt300n|\
        gl-mt750|\
        hg255d|\
+       hiwifi,hc5861b|\
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
@@ -483,7 +484,8 @@ ramips_setup_macs()
                ;;
        hc5*61|\
        hc5661a|\
-       hc5962)
+       hc5962|\
+       hiwifi,hc5861b)
                lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index a46925a43be196720186afca2903706865016387..a102a0bf7a8d89ca7aac7f94d3b23bce2d27c20e 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -73,6 +73,7 @@ platform_check_image() {
        hc5*61|\
        hc5661a|\
        hg255d|\
+       hiwifi,hc5861b|\
        hlk-rm04|\
        hpm|\
        ht-tm02|\

diff --git a/target/linux/ramips/dts/HC5861B.dts b/target/linux/ramips/dts/HC5861B.dts
new file mode 100644 (file)
index 0000000..e4a4cce
--- /dev/null
+++ b/target/linux/ramips/dts/HC5861B.dts
@@ -0,0 +1,141 @@
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "hiwifi,hc5861b", "mediatek,mt7628an-soc";
+       model = "HiWiFi HC5861B";
+
+       aliases {
+               led-status = &led_system;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x8000000>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               led_system: system {
+                       label = "hc5861b:green:system";
+                       gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+               };
+               wlan2g {
+                       label = "hc5861b:green:wlan2g";
+                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "refclk", "wdt", "wled_an";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "hw_panic";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xf70000>;
+                       };
+
+                       partition@fc0000 {
+                               label = "oem";
+                               reg = <0xfc0000 0x20000>;
+                               read-only;
+                       };
+
+                       bdinfo: partition@fe0000 {
+                               label = "bdinfo";
+                               reg = <0xfe0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@ff0000 {
+                               label = "backup";
+                               reg = <0xff0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+       status = "okay";
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               mtd-mac-address = <&factory 0x2e>;
+               ieee80211-freq-limit = <5000000 6000000>;
+
+               led {
+                       led-sources = <2>;
+                       led-active-low;
+               };
+       };
+};

diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index eddbbea3c23ed73ad8eb6014c40877f50c411743..0c657d5a0f66f1ceda397414f9eeb5020c70880c 100644 (file)
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -69,6 +69,13 @@ define Device/hc5661a
 endef
 TARGET_DEVICES += hc5661a
 
+define Device/hiwifi_hc5861b
+  DTS := HC5861B
+  IMAGE_SIZE := 15808k
+  DEVICE_TITLE := HiWiFi HC5861B
+endef
+TARGET_DEVICES += hiwifi_hc5861b
+
 define Device/LinkIt7688
   DTS := LINKIT7688
   IMAGE_SIZE := $(ralink_default_fw_size_32M)