[MIPS] setup.c: move initrd code inside dedicated functions

NUMA specific code could rely on them too.

Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index bcbd926e58f7af6e2dcbb8392f046830a405d521..489b27320dfaa85d515841af36b6f472d67f2ad1 100644 (file)
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -200,7 +200,12 @@ static inline void parse_cmdline_early(void)
        }
 }
 
-static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_end)
+/*
+ * Manage initrd
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+
+static int __init parse_rd_cmdline(unsigned long *rd_start, unsigned long *rd_end)
 {
        /*
         * "rd_start=0xNNNNNNNN" defines the memory address of an initrd
@@ -263,49 +268,93 @@ static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_en
        return 0;
 }
 
+static unsigned long __init init_initrd(void)
+{
+       unsigned long tmp, end;
+       u32 *initrd_header;
+
+       ROOT_DEV = Root_RAM0;
+
+       if (parse_rd_cmdline(&initrd_start, &initrd_end))
+               return initrd_end;
+       /*
+        * Board specific code should have set up initrd_start
+        * and initrd_end...
+        */
+       end = (unsigned long)&_end;
+       tmp = PAGE_ALIGN(end) - sizeof(u32) * 2;
+       if (tmp < end)
+               tmp += PAGE_SIZE;
+
+       initrd_header = (u32 *)tmp;
+       if (initrd_header[0] == 0x494E5244) {
+               initrd_start = (unsigned long)&initrd_header[2];
+               initrd_end = initrd_start + initrd_header[1];
+       }
+       return initrd_end;
+}
+
+static void __init finalize_initrd(void)
+{
+       unsigned long size = initrd_end - initrd_start;
+
+       if (size == 0) {
+               printk(KERN_INFO "Initrd not found or empty");
+               goto disable;
+       }
+       if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
+               printk("Initrd extends beyond end of memory");
+               goto disable;
+       }
+
+       reserve_bootmem(CPHYSADDR(initrd_start), size);
+       initrd_below_start_ok = 1;
+
+       printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n",
+              initrd_start, size);
+       return;
+disable:
+       printk(" - disabling initrd\n");
+       initrd_start = 0;
+       initrd_end = 0;
+}
+
+#else  /* !CONFIG_BLK_DEV_INITRD */
+
+#define init_initrd()          0
+#define finalize_initrd()      do {} while (0)
+
+#endif
+
 /*
  * Initialize the bootmem allocator. It also setup initrd related data
  * if needed.
  */
+#ifdef CONFIG_SGI_IP27
+
 static void __init bootmem_init(void)
 {
-       unsigned long reserved_end = (unsigned long)&_end;
-#ifndef CONFIG_SGI_IP27
+       init_initrd();
+       finalize_initrd();
+}
+
+#else  /* !CONFIG_SGI_IP27 */
+
+static void __init bootmem_init(void)
+{
+       unsigned long reserved_end;
        unsigned long highest = 0;
        unsigned long mapstart = -1UL;
        unsigned long bootmap_size;
        int i;
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
-       int initrd_reserve_bootmem = 0;
-
-       /* Board specific code should have set up initrd_start and initrd_end */
-       ROOT_DEV = Root_RAM0;
-       if (parse_rd_cmdline(&initrd_start, &initrd_end)) {
-               reserved_end = max(reserved_end, initrd_end);
-               initrd_reserve_bootmem = 1;
-       } else {
-               unsigned long tmp;
-               u32 *initrd_header;
-
-               tmp = PAGE_ALIGN(reserved_end) - sizeof(u32) * 2;
-               if (tmp < reserved_end)
-                       tmp += PAGE_SIZE;
-               initrd_header = (u32 *)tmp;
-               if (initrd_header[0] == 0x494E5244) {
-                       initrd_start = (unsigned long)&initrd_header[2];
-                       initrd_end = initrd_start + initrd_header[1];
-                       reserved_end = max(reserved_end, initrd_end);
-                       initrd_reserve_bootmem = 1;
-               }
-       }
-#endif /* CONFIG_BLK_DEV_INITRD */
 
-#ifndef CONFIG_SGI_IP27
        /*
-        * reserved_end is now a pfn
+        * Init any data related to initrd. It's a nop if INITRD is
+        * not selected. Once that done we can determine the low bound
+        * of usable memory.
         */
-       reserved_end = PFN_UP(CPHYSADDR(reserved_end));
+       reserved_end = init_initrd();
+       reserved_end = PFN_UP(CPHYSADDR(max(reserved_end, (unsigned long)&_end)));
 
        /*
         * Find the highest page frame number we have available.
@@ -388,35 +437,14 @@ static void __init bootmem_init(void)
         */
        reserve_bootmem(PFN_PHYS(mapstart), bootmap_size);
 
-#endif /* CONFIG_SGI_IP27 */
-
-#ifdef CONFIG_BLK_DEV_INITRD
-       initrd_below_start_ok = 1;
-       if (initrd_start) {
-               unsigned long initrd_size = ((unsigned char *)initrd_end) -
-                       ((unsigned char *)initrd_start);
-               const int width = sizeof(long) * 2;
-
-               printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
-                      (void *)initrd_start, initrd_size);
-
-               if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
-                       printk("initrd extends beyond end of memory "
-                              "(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n",
-                              width,
-                              (unsigned long long) CPHYSADDR(initrd_end),
-                              width,
-                              (unsigned long long) PFN_PHYS(max_low_pfn));
-                       initrd_start = initrd_end = 0;
-                       initrd_reserve_bootmem = 0;
-               }
-
-               if (initrd_reserve_bootmem)
-                       reserve_bootmem(CPHYSADDR(initrd_start), initrd_size);
-       }
-#endif /* CONFIG_BLK_DEV_INITRD  */
+       /*
+        * Reserve initrd memory if needed.
+        */
+       finalize_initrd();
 }
 
+#endif /* CONFIG_SGI_IP27 */
+
 /*
  * arch_mem_init - initialize memory managment subsystem
  *