ar71xx: Move OpenMesh image target validation into subfunction

The platform_check_image_openmesh function used break statements to signal
that the board name matched the image target. This worked because the
sysupgrade binary checked the image inside a loop. The break statement
stopped the loop and skipped any additional check.

Instead the check should be done without such sideeffects by simply
combining the board names and image targets. Only a mismatch should cause a
negative result for the caller and skipping of the additional checks.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

diff --git a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
index 209cdaaf90e5e623fb17c5c482f63e0d1c767479..e0269467168ed59818ccd52cd3f0a26e68a3149f 100644 (file)
--- a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
@@ -36,62 +36,46 @@ platform_add_ramfs_ubootenv()
 }
 append sysupgrade_pre_upgrade platform_add_ramfs_ubootenv
 
-platform_check_image_openmesh()
+platform_check_image_target_openmesh()
 {
-       local img_magic=$1
-       local img_path=$2
-       local fw_printenv=/usr/sbin/fw_printenv
-       local img_board_target= img_num_files= i=0
-       local cfg_name= kernel_name= rootfs_name=
-
-       case "$img_magic" in
-               # Combined Extended Image v1
-               43453031)
-                       img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null))
-                       img_num_files=$(trim $(dd if="$img_path" bs=2 skip=18 count=1 2>/dev/null))
-                       ;;
-               *)
-                       echo "Invalid image ($img_magic). Use combined extended images on this platform"
-                       return 1
-                       ;;
-       esac
+       img_board_target="$1"
 
        case "$img_board_target" in
                OM2P)
-                       [ "$board" = "om2p" ] && break
-                       [ "$board" = "om2pv2" ] && break
-                       [ "$board" = "om2p-lc" ] && break
-                       [ "$board" = "om2p-hs" ] && break
-                       [ "$board" = "om2p-hsv2" ] && break
+                       [ "$board" = "om2p" ] && return 0
+                       [ "$board" = "om2pv2" ] && return 0
+                       [ "$board" = "om2p-lc" ] && return 0
+                       [ "$board" = "om2p-hs" ] && return 0
+                       [ "$board" = "om2p-hsv2" ] && return 0
                        echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
                        return 1
                        ;;
                OM5P)
-                       [ "$board" = "om5p" ] && break
-                       [ "$board" = "om5p-an" ] && break
+                       [ "$board" = "om5p" ] && return 0
+                       [ "$board" = "om5p-an" ] && return 0
                        echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
                        return 1
                        ;;
                OM5PAC)
-                       [ "$board" = "om5p-ac" ] && break
-                       [ "$board" = "om5p-acv2" ] && break
+                       [ "$board" = "om5p-ac" ] && return 0
+                       [ "$board" = "om5p-acv2" ] && return 0
                        echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
                        return 1
                        ;;
                MR1750)
-                       [ "$board" = "mr1750" ] && break
+                       [ "$board" = "mr1750" ] && return 0
                        echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
                        return 1
                        ;;
                MR600)
-                       [ "$board" = "mr600" ] && break
-                       [ "$board" = "mr600v2" ] && break
+                       [ "$board" = "mr600" ] && return 0
+                       [ "$board" = "mr600v2" ] && return 0
                        echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
                        return 1
                        ;;
                MR900)
-                       [ "$board" = "mr900" ] && break
-                       [ "$board" = "mr900v2" ] && break
+                       [ "$board" = "mr900" ] && return 0
+                       [ "$board" = "mr900v2" ] && return 0
                        echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
                        return 1
                        ;;
@@ -100,6 +84,29 @@ platform_check_image_openmesh()
                        return 1
                        ;;
        esac
+}
+
+platform_check_image_openmesh()
+{
+       local img_magic=$1
+       local img_path=$2
+       local fw_printenv=/usr/sbin/fw_printenv
+       local img_board_target= img_num_files= i=0
+       local cfg_name= kernel_name= rootfs_name=
+
+       case "$img_magic" in
+               # Combined Extended Image v1
+               43453031)
+                       img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null))
+                       img_num_files=$(trim $(dd if="$img_path" bs=2 skip=18 count=1 2>/dev/null))
+                       ;;
+               *)
+                       echo "Invalid image ($img_magic). Use combined extended images on this platform"
+                       return 1
+                       ;;
+       esac
+
+       platform_check_image_target_openmesh "$img_board_target" || return 1
 
        [ $img_num_files -ne 3 ] && {
                echo "Invalid number of embedded images ($img_num_files). Use the correct image for this platform"