--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "mt7981.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=PARTLABEL=rootfs rootwait";
+ };
+
+ aliases {
+ label-mac-device = &gmac0;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fan_5v: regulator-fan-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fan";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 28 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ hub_power {
+ gpio-export,name = "hub_power";
+ gpio-export,output = <1>;
+ gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5G_power {
+ gpio-export,name = "5G_power";
+ gpio-export,output = <1>;
+ gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5G_control {
+ gpio-export,name = "5G_control";
+ gpio-export,output = <1>;
+ gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5G_reset {
+ gpio-export,name = "5G_reset";
+ gpio-export,output = <0>;
+ gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi2g {
+ label = "green:wifi2g";
+ gpios = <&pio 30 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi5g {
+ label = "green:wifi5g";
+ gpios = <&pio 38 GPIO_ACTIVE_LOW>;
+ };
+
+ 5g_led1 {
+ label = "green:5g:led1";
+ gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ 5g_led2 {
+ label = "green:5g:led2";
+ gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ 5g_led3 {
+ label = "green:5g:led3";
+ gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ 5g_led4 {
+ label = "green:5g:led4";
+ gpios = <&pio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&pio 39 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&pio 31 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <52000000>;
+ cap-mmc-highspeed;
+ vmmc-supply = <®_3p3v>;
+ non-removable;
+ status = "okay";
+
+ card@0 {
+ compatible = "mmc-card";
+ reg = <0>;
+
+ block {
+ compatible = "block-device";
+ partitions {
+ block-partition-env {
+ partname = "u-boot-env";
+
+ nvmem-layout {
+ compatible = "u-boot,env-layout";
+ };
+ };
+
+ block-partition-factory {
+ partname = "factory";
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x1000>;
+ };
+
+ macaddr_factory_a: macaddr@a {
+ compatible = "mac-base";
+ reg = <0xa 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+ };
+ };
+ };
+};
+
+&mdio_bus {
+ reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <600>;
+ reset-post-delay-us = <20000>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+};
+
+ð {
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+ phy-handle = <&phy5>;
+ nvmem-cells = <&macaddr_factory_a 0>;
+ nvmem-cell-names = "mac-address";
+ };
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&int_gbe_phy>;
+ nvmem-cells = <&macaddr_factory_a 1>;
+ nvmem-cell-names = "mac-address";
+ };
+};
+
+&pio {
+ mmc0_pins_default: mmc0-pins-default {
+ mux {
+ function = "flash";
+ groups = "emmc_8";
+ };
+ };
+ mmc0_pins_uhs: mmc0-pins-uhs {
+ mux {
+ function = "flash";
+ groups = "emmc_8";
+ };
+ };
+ pcie_pins: pcie-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_pereset", "pcie_clk", "pcie_wake";
+ };
+ };
+ pwm0_pin: pwm0-pin-g0 {
+ mux {
+ function = "pwm";
+ groups = "pwm0_1";
+ };
+ };
+};
+
+&xhci {
+ phys = <&u2port0 PHY_TYPE_USB2>;
+ vbus-supply = <®_5v>;
+ mediatek,u3p-dis-msk = <0x01>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pins>;
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+};
+
+&wifi {
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+ status = "okay";
+};
+
+&fan {
+ pwms = <&pwm 0 40000 0>;
+ fan-supply = <&fan_5v>;
+ interrupt-parent = <&pio>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+ status = "okay";
+};
endef
TARGET_DEVICES += glinet_gl-mt6000
+define Device/glinet_gl-x3000-xe3000-common
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware mkf2fs \
+ kmod-fs-f2fs kmod-hwmon-pwmfan kmod-usb3 kmod-usb-serial-option \
+ kmod-usb-storage kmod-usb-net-qmi-wwan uqmi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/glinet_gl-x3000
+ DEVICE_MODEL := GL-X3000
+ DEVICE_DTS := mt7981a-glinet-gl-x3000
+ SUPPORTED_DEVICES := glinet,gl-x3000
+ $(call Device/glinet_gl-x3000-xe3000-common)
+endef
+TARGET_DEVICES += glinet_gl-x3000
+
+define Device/glinet_gl-xe3000
+ DEVICE_MODEL := GL-XE3000
+ DEVICE_DTS := mt7981a-glinet-gl-xe3000
+ SUPPORTED_DEVICES := glinet,gl-xe3000
+ $(call Device/glinet_gl-x3000-xe3000-common)
+endef
+TARGET_DEVICES += glinet_gl-xe3000
+
define Device/h3c_magic-nx30-pro
DEVICE_VENDOR := H3C
DEVICE_MODEL := Magic NX30 Pro
projects / openwrt / staging / dangole.git / commitdiff