/* Match it to a port node */
index = (ap == ap->host->ports[0]) ? 0 : 1;
for (np = np->child; np != NULL; np = np->sibling) {
- const u32 *reg = get_property(np, "reg", NULL);
+ const u32 *reg = of_get_property(np, "reg", NULL);
if (!reg)
continue;
if (index == *reg)
uninorth_node = of_find_node_by_name(NULL, "u3");
}
if (uninorth_node) {
- const int *revprop = get_property(uninorth_node,
+ const int *revprop = of_get_property(uninorth_node,
"device-rev", NULL);
if (revprop != NULL)
uninorth_rev = *revprop & 0x3f;
const char *machine;
int i;
- machine = get_property(root, "model", NULL);
+ machine = of_get_property(root, "model", NULL);
if (!machine || strncmp(machine, "TotalImpact,BRIQ-1", 18) != 0)
return -ENODEV;
(num_found >= VTTY_PORTS))
break;
- vtermno = get_property(vty, "reg", NULL);
+ vtermno = of_get_property(vty, "reg", NULL);
if (!vtermno)
continue;
if (num_found >= MAX_NR_HVC_CONSOLES)
break;
- vtermno = get_property(vty, "reg", NULL);
+ vtermno = of_get_property(vty, "reg", NULL);
if (!vtermno)
continue;
struct hvsi_struct *hp;
const uint32_t *vtermno, *irq;
- vtermno = get_property(vty, "reg", NULL);
- irq = get_property(vty, "interrupts", NULL);
+ vtermno = of_get_property(vty, "reg", NULL);
+ irq = of_get_property(vty, "interrupts", NULL);
if (!vtermno || !irq)
continue;
return NULL;
}
- reg = get_property(dn, "reg", ®len);
+ reg = of_get_property(dn, "reg", ®len);
naddrc = of_n_addr_cells(dn);
nsizec = of_n_size_cells(dn);
const u32 *prop;
/* Get orientation */
- prop = get_property(ams_info.of_node, "orientation", NULL);
+ prop = of_get_property(ams_info.of_node, "orientation", NULL);
if (!prop)
return -ENODEV;
ams_info.orient1 = *prop;
ams_info.bustype = BUS_I2C;
/* look for bus either using "reg" or by path */
- prop = get_property(ams_info.of_node, "reg", NULL);
+ prop = of_get_property(ams_info.of_node, "reg", NULL);
if (!prop) {
result = -ENODEV;
ams_info.bustype = BUS_HOST;
/* Get PMU command, should be 0x4e, but we can never know */
- prop = get_property(ams_info.of_node, "reg", NULL);
+ prop = of_get_property(ams_info.of_node, "reg", NULL);
if (!prop) {
result = -ENODEV;
goto exit;
pmif->broken_dma = 1;
}
- bidp = get_property(np, "AAPL,bus-id", NULL);
+ bidp = of_get_property(np, "AAPL,bus-id", NULL);
pmif->aapl_bus_id = bidp ? *bidp : 0;
/* Get cable type from device-tree */
if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
|| pmif->kind == controller_sh_ata6) {
- const char* cable = get_property(np, "cable-type", NULL);
+ const char* cable = of_get_property(np, "cable-type", NULL);
if (cable && !strncmp(cable, "80-", 3))
pmif->cable_80 = 1;
}
struct ib_pd *ibpd;
int ret;
- handle = get_property(dev->ofdev.node, "ibm,hca-handle", NULL);
+ handle = of_get_property(dev->ofdev.node, "ibm,hca-handle", NULL);
if (!handle) {
ehca_gen_err("Cannot get eHCA handle for adapter: %s.",
dev->ofdev.node->full_name);
#endif
MAX_NODE_NAME_SIZE, np->name);
} else {
- reg = get_property(np, "reg", NULL);
+ reg = of_get_property(np, "reg", NULL);
sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s",
chip->lbus.index,
reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name);
int length = 0;
of = &to_macio_device (dev)->ofdev;
- compat = get_property(of->node, "compatible", &cplen);
+ compat = of_get_property(of->node, "compatible", &cplen);
if (!compat) {
*buf = '\0';
return 0;
int length;
of = &to_macio_device (dev)->ofdev;
- compat = get_property(of->node, "compatible", &cplen);
+ compat = of_get_property(of->node, "compatible", &cplen);
if (!compat) compat = "", cplen = 1;
length = sprintf (buf, "of:N%sT%s", of->node->name, of->node->type);
buf += length;
if (strcmp(np->name, "lightshow") == 0)
break;
if ((strcmp(np->name, "sound") == 0) &&
- get_property(np, "virtual", NULL) != NULL)
+ of_get_property(np, "virtual", NULL) != NULL)
break;
}
if (np == NULL) {
printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n");
goto fail;
}
- data = get_property(smu->db_node, "reg", NULL);
+ data = of_get_property(smu->db_node, "reg", NULL);
if (data == NULL) {
of_node_put(smu->db_node);
smu->db_node = NULL;
smu->msg_node = of_find_node_by_name(NULL, "smu-interrupt");
if (smu->msg_node == NULL)
break;
- data = get_property(smu->msg_node, "reg", NULL);
+ data = of_get_property(smu->msg_node, "reg", NULL);
if (data == NULL) {
of_node_put(smu->msg_node);
smu->msg_node = NULL;
} else
mutex_lock(&smu_part_access);
- part = get_property(smu->of_node, pname, size);
+ part = of_get_property(smu->of_node, pname, size);
if (part == NULL) {
DPRINTK("trying to extract from SMU ...\n");
part = smu_create_sdb_partition(id);
else
return -ENODEV;
- prop = get_property(np, "hwsensor-params-version", NULL);
+ prop = of_get_property(np, "hwsensor-params-version", NULL);
printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
(*prop == 1)?"":"un");
if (*prop != 1)
return -ENODEV;
- prop = get_property(np, "reg", NULL);
+ prop = of_get_property(np, "reg", NULL);
if (!prop)
return -ENODEV;
"limit_adjust: %d, fan_speed: %d\n",
therm_bus, therm_address, limit_adjust, fan_speed);
- if (get_property(np, "hwsensor-location", NULL)) {
+ if (of_get_property(np, "hwsensor-location", NULL)) {
for (i = 0; i < 3; i++) {
- sensor_location[i] = get_property(np,
+ sensor_location[i] = of_get_property(np,
"hwsensor-location", NULL) + offset;
if (sensor_location[i] == NULL)
printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid node from device-tree\n");
return -ENODEV;
}
- data = get_property(np, "cpuid", &len);
+ data = of_get_property(np, "cpuid", &len);
if (data == NULL) {
printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid property from device-tree\n");
of_node_put(np);
*/
u3 = of_find_node_by_path("/u3@0,f8000000");
if (u3 != NULL) {
- const u32 *vers = get_property(u3, "device-rev", NULL);
+ const u32 *vers = of_get_property(u3, "device-rev", NULL);
if (vers)
if (((*vers) & 0x3f) < 0x34)
u3h = 0;
continue;
/* Lookup for a matching location */
- loc = get_property(np, "location", NULL);
- reg = get_property(np, "reg", NULL);
+ loc = of_get_property(np, "location", NULL);
+ reg = of_get_property(np, "reg", NULL);
if (loc == NULL || reg == NULL)
continue;
DBG(" matching location: %s, reg: 0x%08x\n", loc, *reg);
if( !(np=of_find_node_by_name(NULL, "power-mgt")) )
return -ENODEV;
- info = get_property(np, "thermal-info", NULL);
+ info = of_get_property(np, "thermal-info", NULL);
of_node_put(np);
if( !info || !machine_is_compatible("PowerMac3,6") )
if (vias == 0)
return 0;
- reg = get_property(vias, "reg", NULL);
+ reg = of_get_property(vias, "reg", NULL);
if (reg == NULL) {
printk(KERN_ERR "via-cuda: No \"reg\" property !\n");
goto fail;
dt = of_find_node_by_path("/");
if (dt == NULL)
return -ENODEV;
- model = get_property(dt, "model", NULL);
+ model = of_get_property(dt, "model", NULL);
if (model == NULL)
return -ENODEV;
if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
if (vias == NULL)
return 0;
- reg = get_property(vias, "reg", NULL);
+ reg = of_get_property(vias, "reg", NULL);
if (reg == NULL) {
printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
goto fail;
gpiop = of_find_node_by_name(NULL, "gpio");
if (gpiop) {
- reg = get_property(gpiop, "reg", NULL);
+ reg = of_get_property(gpiop, "reg", NULL);
if (reg)
gaddr = of_translate_address(gpiop, reg);
if (gaddr != OF_BAD_ADDR)
struct device_node* prim = find_devices("power-mgt");
const u32 *prim_info = NULL;
if (prim)
- prim_info = get_property(prim, "prim-info", NULL);
+ prim_info = of_get_property(prim, "prim-info", NULL);
if (prim_info) {
/* Other stuffs here yet unknown */
pmu_battery_count = (prim_info[6] >> 16) & 0xff;
for (dev = NULL;
(dev = of_get_next_child(busnode, dev)) != NULL;) {
const char *loc =
- get_property(dev, "hwsensor-location", NULL);
+ of_get_property(dev, "hwsensor-location", NULL);
u8 addr;
/* We must re-match the adapter in order to properly check
if (!device_is_compatible(dev, "max6690"))
continue;
addr = pmac_i2c_get_dev_addr(dev);
- loc = get_property(dev, "hwsensor-location", NULL);
+ loc = of_get_property(dev, "hwsensor-location", NULL);
if (loc == NULL || addr == 0)
continue;
printk("found max6690, loc=%s addr=0x%02x\n", loc, addr);
if (fct == NULL)
return NULL;
fct->ctrl.ops = &smu_fan_ops;
- l = get_property(node, "location", NULL);
+ l = of_get_property(node, "location", NULL);
if (l == NULL)
goto fail;
goto fail;
/* Get min & max values*/
- v = get_property(node, "min-value", NULL);
+ v = of_get_property(node, "min-value", NULL);
if (v == NULL)
goto fail;
fct->min = *v;
- v = get_property(node, "max-value", NULL);
+ v = of_get_property(node, "max-value", NULL);
if (v == NULL)
goto fail;
fct->max = *v;
/* Get "reg" value */
- reg = get_property(node, "reg", NULL);
+ reg = of_get_property(node, "reg", NULL);
if (reg == NULL)
goto fail;
fct->reg = *reg;
char *name;
int vsens[2], isens[2];
- reg = get_property(dev, "reg", NULL);
+ reg = of_get_property(dev, "reg", NULL);
if (reg == NULL)
return;
addr = *reg;
isens[0] = isens[1] = -1;
child = NULL;
while ((child = of_get_next_child(dev, child)) != NULL) {
- reg = get_property(child, "reg", NULL);
- type = get_property(child, "device_type", NULL);
- loc = get_property(child, "location", NULL);
+ reg = of_get_property(child, "reg", NULL);
+ type = of_get_property(child, "device_type", NULL);
+ loc = of_get_property(child, "location", NULL);
if (reg == NULL || loc == NULL)
continue;
ads = kmalloc(sizeof(struct smu_ad_sensor), GFP_KERNEL);
if (ads == NULL)
return NULL;
- c = get_property(node, "device_type", NULL);
- l = get_property(node, "location", NULL);
+ c = of_get_property(node, "device_type", NULL);
+ l = of_get_property(node, "location", NULL);
if (c == NULL || l == NULL)
goto fail;
} else
goto fail;
- v = get_property(node, "reg", NULL);
+ v = of_get_property(node, "reg", NULL);
if (v == NULL)
goto fail;
ads->reg = *v;
const u32 *part;
const char *name;
- part = get_property(node, "partitions", &plen);
+ part = of_get_property(node, "partitions", &plen);
if (part == NULL)
goto err;
goto err;
}
- name = get_property(node, "partition-names", &plen);
+ name = of_get_property(node, "partition-names", &plen);
for (i = 0; i < retval; i++) {
(*parts)[i].offset = *part++;
goto err_out;
}
- width = get_property(dp, "bank-width", NULL);
+ width = of_get_property(dp, "bank-width", NULL);
if (width == NULL) {
dev_err(&dev->dev, "Can't get the flash bank width!\n");
err = -EINVAL;
simple_map_init(&info->map);
- of_probe = get_property(dp, "probe-type", NULL);
+ of_probe = of_get_property(dp, "probe-type", NULL);
if (of_probe == NULL) {
probe_type = rom_probe_types;
for (; info->mtd == NULL && *probe_type != NULL; probe_type++)
printk(KERN_ERR "BMAC: can't use, need 3 addrs and 3 intrs\n");
return -ENODEV;
}
- prop_addr = get_property(macio_get_of_node(mdev), "mac-address", NULL);
+ prop_addr = of_get_property(macio_get_of_node(mdev),
+ "mac-address", NULL);
if (prop_addr == NULL) {
- prop_addr = get_property(macio_get_of_node(mdev),
+ prop_addr = of_get_property(macio_get_of_node(mdev),
"local-mac-address", NULL);
if (prop_addr == NULL) {
printk(KERN_ERR "BMAC: Can't get mac-address\n");
port->of_dev_node = dn;
/* Determine logical port id */
- dn_log_port_id = get_property(dn, "ibm,hea-port-no", NULL);
+ dn_log_port_id = of_get_property(dn, "ibm,hea-port-no", NULL);
if (!dn_log_port_id) {
ehea_error("bad device node: dn_log_port_id=%p",
goto out;
}
- adapter_handle = get_property(dev->ofdev.node, "ibm,hea-handle",
+ adapter_handle = of_get_property(dev->ofdev.node, "ibm,hea-handle",
NULL);
if (adapter_handle)
adapter->handle = *adapter_handle;
return -ENODEV;
}
- addr = get_property(mace, "mac-address", NULL);
+ addr = of_get_property(mace, "mac-address", NULL);
if (addr == NULL) {
- addr = get_property(mace, "local-mac-address", NULL);
+ addr = of_get_property(mace, "local-mac-address", NULL);
if (addr == NULL) {
printk(KERN_ERR "Can't get mac-address for MACE %s\n",
mace->full_name);
return -ENOENT;
}
- maddr = get_property(dn, "mac-address", NULL);
+ maddr = of_get_property(dn, "mac-address", NULL);
if (maddr == NULL) {
dev_warn(&pdev->dev,
"no mac address in device tree, not configuring\n");
if (!dn)
goto out_err;
- fw_prop = get_property(dn, "firmware", &fw_size);
+ fw_prop = of_get_property(dn, "firmware", &fw_size);
if (!fw_prop)
goto out_err;
if (!dn)
return -EIO;
- mac = get_property(dn, "local-mac-address", NULL);
+ mac = of_get_property(dn, "local-mac-address", NULL);
if (!mac)
return -EIO;
memcpy(addr.sa_data, mac, ETH_ALEN);
#elif defined(CONFIG_PPC_PMAC)
const unsigned char *addr;
- addr = get_property(gp->of_node, "local-mac-address", NULL);
+ addr = of_get_property(gp->of_node, "local-mac-address", NULL);
if (addr == NULL) {
printk("\n");
printk(KERN_ERR "%s: can't get mac-address\n", dev->name);
if (phy->platform_data) {
struct device_node *np = of_get_parent(phy->platform_data);
int can_low_power = 1;
- if (np == NULL || get_property(np, "no-autolowpower", NULL))
+ if (np == NULL || of_get_property(np, "no-autolowpower", NULL))
can_low_power = 0;
if (can_low_power) {
/* Enable automatic low-power */
ugeth_vdbg("%s: IN", __FUNCTION__);
- prop = get_property(np, "device-id", NULL);
+ prop = of_get_property(np, "device-id", NULL);
ucc_num = *prop - 1;
if ((ucc_num < 0) || (ucc_num > 7))
return -ENODEV;
ug_info = &ugeth_info[ucc_num];
ug_info->uf_info.ucc_num = ucc_num;
- prop = get_property(np, "rx-clock", NULL);
+ prop = of_get_property(np, "rx-clock", NULL);
ug_info->uf_info.rx_clock = *prop;
- prop = get_property(np, "tx-clock", NULL);
+ prop = of_get_property(np, "tx-clock", NULL);
ug_info->uf_info.tx_clock = *prop;
err = of_address_to_resource(np, 0, &res);
if (err)
ug_info->uf_info.regs = res.start;
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
- ph = get_property(np, "phy-handle", NULL);
+ ph = of_get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
if (phy == NULL)
return -ENODEV;
- prop = get_property(phy, "reg", NULL);
+ prop = of_get_property(phy, "reg", NULL);
ug_info->phy_address = *prop;
- prop = get_property(phy, "interface", NULL);
+ prop = of_get_property(phy, "interface", NULL);
ug_info->enet_interface = *prop;
ug_info->phy_interrupt = irq_of_parse_and_map(phy, 0);
ug_info->board_flags = (ug_info->phy_interrupt == NO_IRQ)?
/* timing. */
/* The following compensates by writing to the reserved */
/* QE Port Output Hold Registers (CPOH1?). */
- prop = get_property(phy, "interface", NULL);
+ prop = of_get_property(phy, "interface", NULL);
phy_interface = *prop;
if ((phy_interface == ENET_1000_RGMII) ||
(phy_interface == ENET_100_RGMII) ||
soc = of_find_node_by_type(NULL, "soc");
if (soc) {
unsigned int size;
- const void *prop = get_property(soc, "reg", &size);
+ const void *prop = of_get_property(soc, "reg", &size);
immrbase = of_translate_address(soc, prop);
of_node_put(soc);
};
{
const int *indexes, *names, *types, *domains;
- indexes = get_property(dn, "ibm,drc-indexes", NULL);
- names = get_property(dn, "ibm,drc-names", NULL);
- types = get_property(dn, "ibm,drc-types", NULL);
- domains = get_property(dn, "ibm,drc-power-domains", NULL);
+ indexes = of_get_property(dn, "ibm,drc-indexes", NULL);
+ names = of_get_property(dn, "ibm,drc-names", NULL);
+ types = of_get_property(dn, "ibm,drc-types", NULL);
+ domains = of_get_property(dn, "ibm,drc-power-domains", NULL);
if (!indexes || !names || !types || !domains) {
/* Slot does not have dynamically-removable children */
char *name_tmp, *type_tmp;
int i, rc;
- my_index = get_property(dn, "ibm,my-drc-index", NULL);
+ my_index = of_get_property(dn, "ibm,my-drc-index", NULL);
if (!my_index) {
/* Node isn't DLPAR/hotplug capable */
return -EINVAL;
if (!rootdn)
return -ENOENT;
- model = get_property(rootdn, "model", NULL);
- id = get_property(rootdn, "system-id", NULL);
+ model = of_get_property(rootdn, "model", NULL);
+ id = of_get_property(rootdn, "system-id", NULL);
if (model && id)
snprintf(system_id, sizeof(system_id), "%s-%s", model, id);
- name = get_property(rootdn, "ibm,partition-name", NULL);
+ name = of_get_property(rootdn, "ibm,partition-name", NULL);
if (name)
strncpy(partition_name, name, sizeof(partition_name));
- num = get_property(rootdn, "ibm,partition-no", NULL);
+ num = of_get_property(rootdn, "ibm,partition-no", NULL);
if (num)
partition_number = *num;
return;
}
- ppartition_name = get_property(rootdn, "ibm,partition-name", NULL);
+ ppartition_name = of_get_property(rootdn, "ibm,partition-name", NULL);
if (ppartition_name)
strncpy(partition_name, ppartition_name,
sizeof(partition_name));
- p_number_ptr = get_property(rootdn, "ibm,partition-no", NULL);
+ p_number_ptr = of_get_property(rootdn, "ibm,partition-no", NULL);
if (p_number_ptr)
partition_number = *p_number_ptr;
}
goto out_free;
}
- clkprop = get_property(node, "clock-frequency", &proplen);
+ clkprop = of_get_property(node, "clock-frequency", &proplen);
if (clkprop == NULL || proplen != sizeof(int)) {
printk(KERN_ERR "%s: can't get clock frequency, "
"assuming 25MHz\n", node->full_name);
ms->tgts[tgt].current_req = NULL;
}
- if ((cfp = get_property(mesh, "clock-frequency", NULL)))
+ if ((cfp = of_get_property(mesh, "clock-frequency", NULL)))
ms->clk_freq = *cfp;
else {
printk(KERN_INFO "mesh: assuming 50MHz clock frequency\n");
continue;
/* Is a particular device number requested? */
- devno = get_property(np, "port-number", NULL);
+ devno = of_get_property(np, "port-number", NULL);
mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1);
}
int ret;
memset(port, 0, sizeof *port);
- spd = get_property(np, "current-speed", NULL);
- clk = get_property(np, "clock-frequency", NULL);
+ spd = of_get_property(np, "current-speed", NULL);
+ clk = of_get_property(np, "clock-frequency", NULL);
if (!clk) {
dev_warn(&ofdev->dev, "no clock-frequency property set\n");
return -ENODEV;
*/
if (device_is_compatible(np, "cobalt"))
uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
- conn = get_property(np, "AAPL,connector", &len);
+ conn = of_get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
uap->port_type = PMAC_SCC_ASYNC;
/* 1999 Powerbook G3 has slot-names property instead */
- slots = get_property(np, "slot-names", &len);
+ slots = of_get_property(np, "slot-names", &len);
if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
struct device_node* i2c_modem = find_devices("i2c-modem");
if (i2c_modem) {
const char* mid =
- get_property(i2c_modem, "modem-id", NULL);
+ of_get_property(i2c_modem, "modem-id", NULL);
if (mid) switch(*mid) {
case 0x04 :
case 0x05 :
if (dp == NULL)
return -ENODEV;
- val = get_property(dp, "ATY,RefCLK", NULL);
+ val = of_get_property(dp, "ATY,RefCLK", NULL);
if (!val || !*val) {
printk(KERN_WARNING "radeonfb: No ATY,RefCLK property !\n");
return -EINVAL;
rinfo->pll.ref_clk = (*val) / 10;
- val = get_property(dp, "ATY,SCLK", NULL);
+ val = of_get_property(dp, "ATY,SCLK", NULL);
if (val && *val)
rinfo->pll.sclk = (*val) / 10;
- val = get_property(dp, "ATY,MCLK", NULL);
+ val = of_get_property(dp, "ATY,MCLK", NULL);
if (val && *val)
rinfo->pll.mclk = (*val) / 10;
static char *propnames[] = { "DFP,EDID", "LCD,EDID", "EDID",
"EDID1", "EDID2", NULL };
const u8 *pedid = NULL;
- const u8 *pmt = NULL;
+ const u8 *pmt;
u8 *tmp;
int i, mt = MT_NONE;
RTRACE("analyzing OF properties...\n");
- pmt = get_property(dp, "display-type", NULL);
+ pmt = of_get_property(dp, "display-type", NULL);
if (!pmt)
return MT_NONE;
RTRACE("display-type: %s\n", pmt);
}
for (i = 0; propnames[i] != NULL; ++i) {
- pedid = get_property(dp, propnames[i], NULL);
+ pedid = of_get_property(dp, propnames[i], NULL);
if (pedid != NULL)
break;
}
* single-head cards have hdno == -1 and skip this step
*/
if (pedid == NULL && dp->parent && (hdno != -1))
- pedid = get_property(dp->parent, (hdno == 0) ? "EDID1" : "EDID2", NULL);
+ pedid = of_get_property(dp->parent,
+ (hdno == 0) ? "EDID1" : "EDID2", NULL);
if (pedid == NULL && dp->parent && (hdno == 0))
- pedid = get_property(dp->parent, "EDID", NULL);
+ pedid = of_get_property(dp->parent, "EDID", NULL);
if (pedid == NULL)
return mt;
do {
if (!dp)
return MT_NONE;
- pname = get_property(dp, "name", NULL);
+ pname = of_get_property(dp, "name", NULL);
if (!pname)
return MT_NONE;
len = strlen(pname);
if (rinfo->of_node != NULL) {
int size;
- mrtable = get_property(rinfo->of_node, "ATY,MRT", &size);
+ mrtable = of_get_property(rinfo->of_node, "ATY,MRT", &size);
if (mrtable)
mrtable_size = size >> 2;
else
for (dp = NULL;
(dp = of_get_next_child(parent, dp)) != NULL;) {
- pname = get_property(dp, "name", NULL);
+ pname = of_get_property(dp, "name", NULL);
if (!pname)
continue;
len = strlen(pname);
if ((pname[len-1] == 'A' && conn == 1) ||
(pname[len-1] == 'B' && conn == 2)) {
for (i = 0; propnames[i] != NULL; ++i) {
- pedid = get_property(dp, propnames[i],
- NULL);
+ pedid = of_get_property(dp,
+ propnames[i], NULL);
if (pedid != NULL)
break;
}
}
if (pedid == NULL) {
for (i = 0; propnames[i] != NULL; ++i) {
- pedid = get_property(parent, propnames[i], NULL);
+ pedid = of_get_property(parent, propnames[i], NULL);
if (pedid != NULL)
break;
}
const u32 *pp, *addrp, *up;
u64 asize;
- pp = get_property(dp, "linux,bootx-depth", &len);
+ pp = of_get_property(dp, "linux,bootx-depth", &len);
if (pp == NULL)
- pp = get_property(dp, "depth", &len);
+ pp = of_get_property(dp, "depth", &len);
if (pp && len == sizeof(u32))
depth = *pp;
- pp = get_property(dp, "linux,bootx-width", &len);
+ pp = of_get_property(dp, "linux,bootx-width", &len);
if (pp == NULL)
- pp = get_property(dp, "width", &len);
+ pp = of_get_property(dp, "width", &len);
if (pp && len == sizeof(u32))
width = *pp;
- pp = get_property(dp, "linux,bootx-height", &len);
+ pp = of_get_property(dp, "linux,bootx-height", &len);
if (pp == NULL)
- pp = get_property(dp, "height", &len);
+ pp = of_get_property(dp, "height", &len);
if (pp && len == sizeof(u32))
height = *pp;
- pp = get_property(dp, "linux,bootx-linebytes", &len);
+ pp = of_get_property(dp, "linux,bootx-linebytes", &len);
if (pp == NULL)
- pp = get_property(dp, "linebytes", &len);
+ pp = of_get_property(dp, "linebytes", &len);
if (pp && len == sizeof(u32) && (*pp != 0xffffffffu))
pitch = *pp;
else
* ranges and pick one that is both big enough and if possible encloses
* the "address" property. If none match, we pick the biggest
*/
- up = get_property(dp, "linux,bootx-addr", &len);
+ up = of_get_property(dp, "linux,bootx-addr", &len);
if (up == NULL)
- up = get_property(dp, "address", &len);
+ up = of_get_property(dp, "address", &len);
if (up && len == sizeof(u32))
addr_prop = *up;
return -ENODEV;
/* Check if we have a MacOS display without a node spec */
- if (get_property(of_chosen, "linux,bootx-noscreen", NULL) != NULL) {
+ if (of_get_property(of_chosen, "linux,bootx-noscreen", NULL) != NULL) {
/* The old code tried to work out which node was the MacOS
* display based on the address. I'm dropping that since the
* lack of a node spec only happens with old BootX versions
}
for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) {
- if (get_property(dp, "linux,opened", NULL) &&
- get_property(dp, "linux,boot-display", NULL)) {
+ if (of_get_property(dp, "linux,opened", NULL) &&
+ of_get_property(dp, "linux,boot-display", NULL)) {
boot_disp = dp;
offb_init_nodriver(dp, 0);
}
}
for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) {
- if (get_property(dp, "linux,opened", NULL) &&
+ if (of_get_property(dp, "linux,opened", NULL) &&
dp != boot_disp)
offb_init_nodriver(dp, 0);
}
NVTRACE_ENTER();
dp = pci_device_to_OF_node(pd);
for (; dp != NULL; dp = dp->child) {
- disptype = get_property(dp, "display-type", NULL);
+ disptype = of_get_property(dp, "display-type", NULL);
if (disptype == NULL)
continue;
if (strncmp(disptype, "LCD", 3) != 0)
continue;
for (i = 0; propnames[i] != NULL; ++i) {
- pedid = get_property(dp, propnames[i], NULL);
+ pedid = of_get_property(dp, propnames[i], NULL);
if (pedid != NULL) {
par->EDID = (unsigned char *)pedid;
NVTRACE("LCD found.\n");
projects / openwrt / staging / blogic.git / commitdiff