mtd: rawnand: denali: convert to nand_scan()
authorMiquel Raynal <miquel.raynal@bootlin.com>
Fri, 20 Jul 2018 15:14:56 +0000 (17:14 +0200)
committerMiquel Raynal <miquel.raynal@bootlin.com>
Tue, 31 Jul 2018 07:45:55 +0000 (09:45 +0200)
Two helpers have been added to the core to do all kind of controller
side configuration/initialization between the detection phase and the
final NAND scan. Implement these hooks so that we can convert the driver
to just use nand_scan() instead of the nand_scan_ident() +
nand_scan_tail() pair.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
drivers/mtd/nand/raw/denali.c

index 4d53f41ada083a83998c1b9af25b35683a1f4344..ca18612c42014288d48c9ac8180a4b5be88e9a06 100644 (file)
@@ -1205,62 +1205,12 @@ static int denali_multidev_fixup(struct denali_nand_info *denali)
        return 0;
 }
 
-int denali_init(struct denali_nand_info *denali)
+static int denali_attach_chip(struct nand_chip *chip)
 {
-       struct nand_chip *chip = &denali->nand;
        struct mtd_info *mtd = nand_to_mtd(chip);
-       u32 features = ioread32(denali->reg + FEATURES);
+       struct denali_nand_info *denali = mtd_to_denali(mtd);
        int ret;
 
-       mtd->dev.parent = denali->dev;
-       denali_hw_init(denali);
-
-       init_completion(&denali->complete);
-       spin_lock_init(&denali->irq_lock);
-
-       denali_clear_irq_all(denali);
-
-       ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
-                              IRQF_SHARED, DENALI_NAND_NAME, denali);
-       if (ret) {
-               dev_err(denali->dev, "Unable to request IRQ\n");
-               return ret;
-       }
-
-       denali_enable_irq(denali);
-       denali_reset_banks(denali);
-
-       denali->active_bank = DENALI_INVALID_BANK;
-
-       nand_set_flash_node(chip, denali->dev->of_node);
-       /* Fallback to the default name if DT did not give "label" property */
-       if (!mtd->name)
-               mtd->name = "denali-nand";
-
-       chip->select_chip = denali_select_chip;
-       chip->read_byte = denali_read_byte;
-       chip->write_byte = denali_write_byte;
-       chip->read_word = denali_read_word;
-       chip->cmd_ctrl = denali_cmd_ctrl;
-       chip->dev_ready = denali_dev_ready;
-       chip->waitfunc = denali_waitfunc;
-
-       if (features & FEATURES__INDEX_ADDR) {
-               denali->host_read = denali_indexed_read;
-               denali->host_write = denali_indexed_write;
-       } else {
-               denali->host_read = denali_direct_read;
-               denali->host_write = denali_direct_write;
-       }
-
-       /* clk rate info is needed for setup_data_interface */
-       if (denali->clk_rate && denali->clk_x_rate)
-               chip->setup_data_interface = denali_setup_data_interface;
-
-       ret = nand_scan_ident(mtd, denali->max_banks, NULL);
-       if (ret)
-               goto disable_irq;
-
        if (ioread32(denali->reg + FEATURES) & FEATURES__DMA)
                denali->dma_avail = 1;
 
@@ -1293,7 +1243,7 @@ int denali_init(struct denali_nand_info *denali)
                                   mtd->oobsize - denali->oob_skip_bytes);
        if (ret) {
                dev_err(denali->dev, "Failed to setup ECC settings.\n");
-               goto disable_irq;
+               return ret;
        }
 
        dev_dbg(denali->dev,
@@ -1337,7 +1287,7 @@ int denali_init(struct denali_nand_info *denali)
 
        ret = denali_multidev_fixup(denali);
        if (ret)
-               goto disable_irq;
+               return ret;
 
        /*
         * This buffer is DMA-mapped by denali_{read,write}_page_raw.  Do not
@@ -1345,26 +1295,92 @@ int denali_init(struct denali_nand_info *denali)
         * guarantee DMA-safe alignment.
         */
        denali->buf = kmalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
-       if (!denali->buf) {
-               ret = -ENOMEM;
-               goto disable_irq;
+       if (!denali->buf)
+               return -ENOMEM;
+
+       return 0;
+}
+
+static void denali_detach_chip(struct nand_chip *chip)
+{
+       struct mtd_info *mtd = nand_to_mtd(chip);
+       struct denali_nand_info *denali = mtd_to_denali(mtd);
+
+       kfree(denali->buf);
+}
+
+static const struct nand_controller_ops denali_controller_ops = {
+       .attach_chip = denali_attach_chip,
+       .detach_chip = denali_detach_chip,
+};
+
+int denali_init(struct denali_nand_info *denali)
+{
+       struct nand_chip *chip = &denali->nand;
+       struct mtd_info *mtd = nand_to_mtd(chip);
+       u32 features = ioread32(denali->reg + FEATURES);
+       int ret;
+
+       mtd->dev.parent = denali->dev;
+       denali_hw_init(denali);
+
+       init_completion(&denali->complete);
+       spin_lock_init(&denali->irq_lock);
+
+       denali_clear_irq_all(denali);
+
+       ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
+                              IRQF_SHARED, DENALI_NAND_NAME, denali);
+       if (ret) {
+               dev_err(denali->dev, "Unable to request IRQ\n");
+               return ret;
+       }
+
+       denali_enable_irq(denali);
+       denali_reset_banks(denali);
+
+       denali->active_bank = DENALI_INVALID_BANK;
+
+       nand_set_flash_node(chip, denali->dev->of_node);
+       /* Fallback to the default name if DT did not give "label" property */
+       if (!mtd->name)
+               mtd->name = "denali-nand";
+
+       chip->select_chip = denali_select_chip;
+       chip->read_byte = denali_read_byte;
+       chip->write_byte = denali_write_byte;
+       chip->read_word = denali_read_word;
+       chip->cmd_ctrl = denali_cmd_ctrl;
+       chip->dev_ready = denali_dev_ready;
+       chip->waitfunc = denali_waitfunc;
+
+       if (features & FEATURES__INDEX_ADDR) {
+               denali->host_read = denali_indexed_read;
+               denali->host_write = denali_indexed_write;
+       } else {
+               denali->host_read = denali_direct_read;
+               denali->host_write = denali_direct_write;
        }
 
-       ret = nand_scan_tail(mtd);
+       /* clk rate info is needed for setup_data_interface */
+       if (denali->clk_rate && denali->clk_x_rate)
+               chip->setup_data_interface = denali_setup_data_interface;
+
+       chip->dummy_controller.ops = &denali_controller_ops;
+       ret = nand_scan(mtd, denali->max_banks);
        if (ret)
-               goto free_buf;
+               goto disable_irq;
 
        ret = mtd_device_register(mtd, NULL, 0);
        if (ret) {
                dev_err(denali->dev, "Failed to register MTD: %d\n", ret);
                goto cleanup_nand;
        }
+
        return 0;
 
 cleanup_nand:
        nand_cleanup(chip);
-free_buf:
-       kfree(denali->buf);
 disable_irq:
        denali_disable_irq(denali);
 
@@ -1377,7 +1393,6 @@ void denali_remove(struct denali_nand_info *denali)
        struct mtd_info *mtd = nand_to_mtd(&denali->nand);
 
        nand_release(mtd);
-       kfree(denali->buf);
        denali_disable_irq(denali);
 }
 EXPORT_SYMBOL(denali_remove);