+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=mipsel
-BOARD:=brcm-2.4
-BOARDNAME:=Broadcom BCM947xx/953xx [2.4]
-FEATURES:=squashfs
-
-KERNEL:=2.4
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES += kmod-switch kmod-diag nvram
-
-define Target/Description
- Build firmware images for Broadcom based routers
- (e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G)
-endef
-
-$(eval $(call BuildTarget))
+++ /dev/null
-define Package/base-files/install-target
- rm -f $(1)/etc/config/network
-endef
-
-
+++ /dev/null
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-set_led() {
- local led="$1"
- local state="$2"
- [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1"
-}
-
-set_state() {
- case "$1" in
- preinit)
- set_led dmz 1
- set_led diag 1
- set_led power 0
- ;;
- failsafe)
- set_led diag f
- set_led power f
- set_led dmz f
- ;;
- done)
- set_led dmz 0
- set_led diag 0
- set_led power 1
- ;;
- esac
-}
+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
- [ -e /etc/config/network ] && {
- local batch
-
- config_cb() {
- case "$1" in
- switch)
- option_cb() {
- case "$1" in
- vlan[0-9]|vlan1[0-5])
- local id="${1#vlan}"
- local ports="${2%\*}"
- append batch "delete network.eth0.${1}${N}"
- append batch "set network.eth0_${id}=switch_vlan${N}"
- append batch "set network.eth0_${id}.device=eth0${N}"
- append batch "set network.eth0_${id}.vlan=${id}${N}"
- append batch "set network.eth0_${id}.ports='${ports}'${N}"
- ;;
- esac
- }
- ;;
- switch_vlan)
- option_cb() { :; }
- batch=""
- ;;
- esac
- }
-
- config_load network
-
- [ -n "$batch" ] && {
- logger -t netconfig "migrating switch config to new format ..."
- echo "$batch${N}commit network" | uci batch
- }
-
- exit 0
- }
-
- mkdir -p /etc/config
-
- (
- if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
- # WGT634u
- echo boardtype=wgt634u
- else
- strings "$(find_mtd_part nvram)"
- fi
- ) | awk '
- function p(cfgname, name) {
- if (c[name] != "") print " option " cfgname " \"" c[name] "\""
- }
-
- function vlan(id, name) {
- if (c[name] != "") {
- print "config switch_vlan eth0_" id
- print " option device \"eth0\""
- print " option vlan " id
- print " option ports \"" c[name] "\""
- print ""
- }
- }
-
- function macinc(mac, maca, i, result) {
- split(mac, maca, ":")
- for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
- if (++maca[6] > 0xff) {
- maca[5]++
- maca[6] = 0
- }
- for (i = 1; i <= 6; i++) {
- if (i != 1) result = result ":"
- result = result sprintf("%02x", maca[i])
- }
- return result
- }
-
- BEGIN {
- FS="="
- c["lan_ifname"]="eth0.0"
- c["wan_ifname"]="eth0.1"
- c["vlan0ports"]="1 2 3 4 5"
- c["vlan1ports"]="0 5"
- getline < "/proc/diag/model"
- model=$0
- for (i = 0; i < 6; i++) {
- if (mac_check != "") mac_check = mac_check ":"
- mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
- }
- }
-
- ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
- nvram[$1] = $2
- }
-
- END {
- if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
- c["wan_ifname"] = ""
- c["lan_ifname"] = "eth1"
- }
- if (model == "ASUS WL-330gE") {
- c["wan_ifname"] = ""
- c["lan_ifname"] = "eth0"
- c["vlan0ports"] = ""
- c["vlan1ports"] = ""
- }
- if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
- c["wan_ifname"] = "eth1"
- c["lan_ifname"] = "eth0"
- }
- if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
- }
- if (model == "Dell TrueMobile 2300") {
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
- }
- if (nvram["boardtype"] == "bcm94710r4") {
- # Toshiba WRC-1000
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- }
- if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
- }
- if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
- if (nvram["boardnum"] == "45") {
- # WL-500gP
- c["vlan0ports"] = "1 2 3 4 5"
- c["vlan1ports"] = "0 5"
- } else {
- # Generic BCM94704
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
-
- # MAC addresses on 4704 tend to be screwed up. Add a workaround here
- if (nvram["et0macaddr"] ~ mac_check) {
- c["lan_macaddr"] = nvram["et0macaddr"]
- c["wan_macaddr"] = macinc(c["lan_macaddr"])
- }
- }
- }
- # Buffalo WBR-B11 and Buffalo WBR-G54
- if (nvram["boardtype"] == "bcm94710ap") {
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- }
- # generic broadcom 4705/4785 processor with 5397 switch?
- # EXCEPT Linksys WRT300N V1.1
- if ((nvram["boardtype"] == "0x478") && \
- (model != "Linksys WRT300N V1.1")) {
- c["vlan0ports"] = "1 2 3 4 8*"
- c["vlan1ports"] = "0 8"
- }
-
- # WAP54G
- if ((nvram["boardnum"] == "2") || \
- (nvram["boardnum"] == "1024")) {
- c["lan_ifname"]="eth0"
- c["wan_ifname"]=""
- }
-
- # Sitecom WL-105b
- if ((nvram["boardum"] == "2") && \
- (nvram["GemtekPmonVer"] == "1")) {
- c["lan_ifname"]="eth0"
- c["wan_ifname"]=""
- }
-
- # ASUS WL-700gE
- # These are actually same as defaults above. For some reason this script applies
- # Generic BCM94704 settings instead so we revert to proper settings here.
- # Hopefully someone will fix this properly soon.
- if (model == "ASUS WL-700gE") {
- c["lan_ifname"]="eth0.0"
- c["wan_ifname"]="eth0.1"
- c["vlan0ports"]="1 2 3 4 5"
- c["vlan1ports"]="0 5"
- }
-
- if (model == "Motorola WR850G V2/V3") {
- c["vlan0ports"]="0 1 2 3 5"
- c["vlan1ports"]="4 5"
- }
- if (model == "ASUS WL-500W") {
- c["lan_ifname"] = "eth0"
- c["wan_ifname"] = "eth1"
- c["vlan0ports"] = "0 1 2 3 4 5u"
- c["vlan1ports"] = ""
- }
- if (model == "OvisLink WL-1600GL") {
- c["lan_ifname"] = "eth0.0"
- c["wan_ifname"] = "eth0.1"
- c["vlan0ports"] = "0 1 2 3 5"
- c["vlan1ports"] = "4 5"
- }
-
- if (c["vlan0ports"] || c["vlan1ports"]) {
- print "#### VLAN configuration "
- print "config switch eth0"
- print " option enable 1"
- print ""
- vlan(0, "vlan0ports")
- vlan(1, "vlan1ports")
- }
- print "#### Loopback configuration"
- print "config interface loopback"
- print " option ifname \"lo\""
- print " option proto static"
- print " option ipaddr 127.0.0.1"
- print " option netmask 255.0.0.0"
- print ""
- print ""
- print "#### LAN configuration"
- print "config interface lan"
- print " option type bridge"
- p("ifname", "lan_ifname")
- p("macaddr", "lan_macaddr")
- print " option proto static"
- print " option ipaddr 192.168.1.1"
- print " option netmask 255.255.255.0"
- print ""
- print ""
- if (c["wan_ifname"]) {
- print "#### WAN configuration"
- print "config interface wan"
- p("ifname", "wan_ifname")
- p("macaddr", "wan_macaddr")
- print " option proto dhcp"
- } else {
- print "#### WAN configuration (disabled)"
- print "#config interface wan"
- print "# option proto dhcp"
- }
- }' > /etc/config/network
-}
+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2010 OpenWrt.org
-
-START=41
-
-boot() {
- [ -d /sys/class/ieee80211 ] || exit
-
- commit=0
-
- fixup_wmac() {
- local cfg="$1"
- local cfmac
-
- config_get cfmac "$cfg" macaddr
-
- [ "$cfmac" != "00:90:4c:5f:00:2a" ] || {
- local nvmac="$(nvram get il0macaddr 2>/dev/null)"
- [ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && {
- uci set wireless.$cfg.macaddr="$nvmac"
- commit=1
- }
- }
- }
-
- config_load wireless
- config_foreach fixup_wmac wifi-device
-
- [ "$commit" = 1 ] && uci commit wireless
-}
-
-start() { :; }
-stop() { :; }
+++ /dev/null
-#!/bin/sh
-
-init_hotplug_failsafe() {
- echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
-}
-
-boot_hook_add preinit_main init_hotplug_failsafe
-
-
+++ /dev/null
-#!/bin/sh
-
-set_preinit_iface() {
- ifname=eth0
-
- insmod diag
-
- # hardware specific overrides
- case "$(cat /proc/diag/model)" in
- "Linksys WAP54G V1") ifname=eth1;;
- "ASUS WL-HDD") ifname=eth1;;
- "ASUS WL-300g") ifname=eth1;;
- "ASUS (unknown, BCM4702)") ifname=eth1;;
- "Sitecom WL-105b") ifname=eth1;;
- esac
- ifconfig $ifname 0.0.0.0 up
-}
-
-check_module () {
- module="$1"; shift; params="$*"
-
- insmod "$module" "$params"
- sleep 1
- grep "^$module" /proc/modules
- return $?
-}
-
-init_iface() {
- check_module tg3
- insmod switch-core
- check_module switch-robo || check_module switch-adm || {
- check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
- } || rmmod switch-core
-}
-
-boot_hook_add preinit_main set_preinit_iface
-boot_hook_add preinit_main init_iface
+++ /dev/null
-#!/bin/sh
-
-failsafe_ip() {
- [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
- ifconfig eth0 0.0.0.0 down
- echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
- }
-
- [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
- ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
- }
-}
-
-boot_hook_add failsafe failsafe_ip
-
+++ /dev/null
-#!/bin/sh
-
-do_mount_procfs() {
- mount none /proc -t proc
-}
-
+++ /dev/null
-#!/bin/sh
-
-port_net_echo() {
- [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
- if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then
- netmsg $pi_broadcast "$1"
- fi
- }
-}
-
-preinit_ip_deconfig() {
- if [ -z "$pi_ifname" ]; then
- ifconfig $ifname 0.0.0.0 down
- else
- grep -q "$pi_ifname" /proc/net/dev && {
- ifconfig $pi_ifname 0.0.0.0 down
- }
- fi
-}
-
-preinit_net_echo() {
- preinit_ip
-
- [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
- echo 1 > /proc/switch/eth0/reset
-
- # this would be easier if we blasted the message across all ports
- # but we don't want packets leaking across interfaces
- for port in $(seq 0 4); do {
- echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
- port_net_echo $1
- }; done
-
- echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-
- } || port_net_echo $1
-}
-
-
+++ /dev/null
-#!/bin/sh
-
-indicate_failsafe() {
- preinit_net_echo() {
- port_net_echo $1
- }
- echo "- failsafe -"
- preinit_net_echo "Entering Failsafe!\n"
- indicate_failsafe_led
-}
-
-
+++ /dev/null
-#!/bin/sh
-
-. /etc/functions.sh
-
-set_boot_wait() {
- [ -x "/usr/sbin/nvram" ] && {
- [ "$(nvram get boot_wait)" != "on" ] && {
- nvram set boot_wait=on
- nvram commit
- }
- }
-}
-
-boot_hook_add failsafe set_boot_wait
+++ /dev/null
-PART_NAME=linux
-
-platform_check_image() {
- [ "$ARGC" -gt 1 ] && return 1
-
- case "$(get_magic_word "$1")" in
- # .trx files
- 4844) return 0;;
- *)
- echo "Invalid image type. Please use only .trx files"
- return 1
- ;;
- esac
-}
-
-# use default for platform_do_upgrade()
+++ /dev/null
-#!/bin/sh
-case "$1" in
- button) kill -USR1 1;;
-esac
+++ /dev/null
-# CONFIG_60XX_WDT is not set
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139TOO is not set
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_AIRO is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_AMD74XX_OVERRIDE is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_APRICOT is not set
-# CONFIG_ATM is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-CONFIG_AX25=m
-CONFIG_B44=y
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-CONFIG_BCM4310=y
-CONFIG_BCM4704=y
-CONFIG_BCM4710=y
-CONFIG_BCM5365=y
-CONFIG_BCM947XX=y
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_ADMA100 is not set
-CONFIG_BLK_DEV_AEC62XX=m
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_SII is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDE=m
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-CONFIG_BLK_DEV_OFFBOARD=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_BLK_DEV_PDC202XX=y
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLUEZ_BNEP=m
-CONFIG_BLUEZ_BNEP_MC_FILTER=y
-CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
-# CONFIG_BLUEZ_HCIBFUSB is not set
-# CONFIG_BLUEZ_HCIBLUECARD is not set
-# CONFIG_BLUEZ_HCIBT3C is not set
-# CONFIG_BLUEZ_HCIBTUART is not set
-# CONFIG_BLUEZ_HCIDTL1 is not set
-CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
-CONFIG_BLUEZ_HCIUART_BCSP=y
-CONFIG_BLUEZ_HCIUART_H4=y
-CONFIG_BLUEZ_HCIUART=m
-CONFIG_BLUEZ_HCIUSB=m
-CONFIG_BLUEZ_HCIUSB_SCO=y
-# CONFIG_BLUEZ_HCIVHCI is not set
-CONFIG_BLUEZ_L2CAP=m
-CONFIG_BLUEZ=m
-CONFIG_BLUEZ_RFCOMM=m
-CONFIG_BLUEZ_RFCOMM_TTY=y
-CONFIG_BLUEZ_SCO=m
-# CONFIG_BPQETHER is not set
-CONFIG_CARDBUS=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
-CONFIG_CRC32=y
-# CONFIG_CS89x0 is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-# CONFIG_DMA_NONPCI is not set
-# CONFIG_E100 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_FEALNX is not set
-CONFIG_FILTER=y
-# CONFIG_FORCEDETH is not set
-CONFIG_HAMRADIO=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_HP100 is not set
-# CONFIG_HPT34X_AUTODMA is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_PROC is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I810_TCO is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_IDEDISK_STROKE=y
-CONFIG_IDEDMA_AUTO=y
-CONFIG_IDEDMA_IVB=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_PCI_WIP is not set
-CONFIG_IDE=m
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_IP_VS is not set
-# CONFIG_LAN_SAA9730 is not set
-# CONFIG_LNE390 is not set
-CONFIG_LOG_BUF_SHIFT=0
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_MIDI_EMU10K1 is not set
-# CONFIG_MIDI_VIA82CXXX is not set
-CONFIG_MINIX_FS=m
-CONFIG_MIPS_BRCM=y
-# CONFIG_MIXCOMWD is not set
-CONFIG_MKISS=m
-CONFIG_MSDOS_FS=m
-CONFIG_MTD_BCM947XX=y
-CONFIG_MTD_CFI_B1=y
-CONFIG_MTD_CFI_SSTSTD=y
-CONFIG_MTD_SFLASH=y
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NE3210 is not set
-CONFIG_NET_PCI=y
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_NETROM is not set
-CONFIG_NET_SCH_ESFQ=m
-CONFIG_NET_WIRELESS=y
-CONFIG_NEW_IRQ=y
-CONFIG_NEW_TIME_C=y
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PARPORT_AMIGA is not set
-# CONFIG_PARPORT_ATARI is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_IP22 is not set
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_MFC3 is not set
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_SPLINK=m
-# CONFIG_PARPORT_SUNBPP is not set
-CONFIG_PCI_AUTO=y
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_NEW is not set
-CONFIG_PCI=y
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_HERMES is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_SERIAL_CS=m
-# CONFIG_PCNET32 is not set
-# CONFIG_PCWATCHDOG is not set
-CONFIG_PDC202XX_BURST=y
-# CONFIG_PDC202XX_FORCE is not set
-# CONFIG_PLX_HERMES is not set
-CONFIG_PPDEV=m
-CONFIG_PRINTER=m
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MIROPCM20 is not set
-# CONFIG_REMOTE_DEBUG is not set
-# CONFIG_ROSE is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_SCC_DELAY is not set
-# CONFIG_SCC_TRXECHO is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C8XX is not set
-# CONFIG_SCSI_PCMCIA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_SYM53C8XX is not set
-# CONFIG_SCx200_WDT is not set
-# CONFIG_SIS900 is not set
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SOUND_AD1980 is not set
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_ICH is not set
-CONFIG_SOUND=m
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUNDMODEM is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_SOUND_WM97XX is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNDANCE_MMIO is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_TCIC is not set
-# CONFIG_TIPAR is not set
-# CONFIG_TLAN is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TULIP is not set
-# CONFIG_TUNER_3036 is not set
-CONFIG_USB_ACM=m
-# CONFIG_USB_AIPTEK is not set
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_BRLVGER is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDCETHER is not set
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DSBR is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_HIDINPUT is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HPUSBSCSI is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_LCD is not set
-CONFIG_USB=m
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_OHCI=m
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_POWERMATE is not set
-CONFIG_USB_PRINTER=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_SE401 is not set
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_HP8200e=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_TIGL is not set
-CONFIG_USB_UHCI_ALT=m
-CONFIG_USB_UHCI=m
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CQCAM is not set
-CONFIG_VIDEO_DEV=m
-# CONFIG_VIDEO_MEYE is not set
-# CONFIG_VIDEO_PMS is not set
-CONFIG_VIDEO_PROC_FS=y
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_ZORAN_BUZ is not set
-# CONFIG_VIDEO_ZORAN_DC10 is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZORAN_LML33 is not set
-# CONFIG_VIDEO_ZR36120 is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_WDC_ALI15X3 is not set
-# CONFIG_WDT is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_YAM is not set
+++ /dev/null
-#
-# Makefile for the BCM947xx specific kernel interface routines
-# under Linux.
-#
-
-EXTRA_CFLAGS+=-I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
-
-O_TARGET := bcm947xx.o
-
-export-objs := export.o
-obj-y := prom.o setup.o time.o sbmips.o gpio.o
-obj-y += nvram.o cfe_env.o hndpmu.o
-obj-y += sbutils.o utils.o bcmsrom.o hndchipc.o
-obj-$(CONFIG_PCI) += sbpci.o pcibios.o
-obj-y += export.o
-
-include $(TOPDIR)/Rules.make
+++ /dev/null
-/*
- * Routines to access SPROM and to parse SROM/CIS variables.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#include <typedefs.h>
-#include <bcmdefs.h>
-#include <osl.h>
-#include <stdarg.h>
-#include <sbchipc.h>
-#include <bcmdevs.h>
-#include <bcmendian.h>
-#include <sbpcmcia.h>
-#include <pcicfg.h>
-#include <sbconfig.h>
-#include <sbutils.h>
-#include <bcmsrom.h>
-#include <bcmnvram.h>
-#include "utils.h"
-
-/* debug/trace */
-#if defined(WLTEST)
-#define BS_ERROR(args) printf args
-#else
-#define BS_ERROR(args)
-#endif
-
-#define WRITE_ENABLE_DELAY 500 /* 500 ms after write enable/disable toggle */
-#define WRITE_WORD_DELAY 20 /* 20 ms between each word write */
-
-typedef struct varbuf
-{
- char *buf; /* pointer to current position */
- unsigned int size; /* current (residual) size in bytes */
-} varbuf_t;
-
-static int initvars_srom_sb (sb_t * sbh, osl_t * osh, void *curmap,
- char **vars, uint * count);
-static void _initvars_srom_pci (uint8 sromrev, uint16 * srom, uint off,
- varbuf_t * b);
-static int initvars_srom_pci (sb_t * sbh, void *curmap, char **vars,
- uint * count);
-static int initvars_cis_pcmcia (sb_t * sbh, osl_t * osh, char **vars,
- uint * count);
-#if !defined(BCMUSBDEV) && !defined(BCMSDIODEV)
-static int initvars_flash_sb (sb_t * sbh, char **vars, uint * count);
-#endif /* !BCMUSBDEV && !BCMSDIODEV */
-static int sprom_cmd_pcmcia (osl_t * osh, uint8 cmd);
-static int sprom_read_pcmcia (osl_t * osh, uint16 addr, uint16 * data);
-static int sprom_write_pcmcia (osl_t * osh, uint16 addr, uint16 data);
-static int sprom_read_pci (osl_t * osh, uint16 * sprom, uint wordoff,
- uint16 * buf, uint nwords, bool check_crc);
-
-static int initvars_table (osl_t * osh, char *start, char *end, char **vars,
- uint * count);
-static int initvars_flash (sb_t * sbh, osl_t * osh, char **vp, uint len);
-
-#ifdef BCMUSBDEV
-static int get_sb_pcmcia_srom (sb_t * sbh, osl_t * osh, uint8 * pcmregs,
- uint boff, uint16 * srom, uint bsz);
-static int set_sb_pcmcia_srom (sb_t * sbh, osl_t * osh, uint8 * pcmregs,
- uint boff, uint16 * srom, uint bsz);
-static uint srom_size (sb_t * sbh, osl_t * osh);
-#endif /* def BCMUSBDEV */
-
-/* Initialization of varbuf structure */
-static void
-varbuf_init (varbuf_t * b, char *buf, uint size)
-{
- b->size = size;
- b->buf = buf;
-}
-
-/* append a null terminated var=value string */
-static int
-varbuf_append (varbuf_t * b, const char *fmt, ...)
-{
- va_list ap;
- int r;
-
- if (b->size < 2)
- return 0;
-
- va_start (ap, fmt);
- r = vsnprintf (b->buf, b->size, fmt, ap);
- va_end (ap);
-
- /* C99 snprintf behavior returns r >= size on overflow,
- * others return -1 on overflow.
- * All return -1 on format error.
- * We need to leave room for 2 null terminations, one for the current var
- * string, and one for final null of the var table. So check that the
- * strlen written, r, leaves room for 2 chars.
- */
- if ((r == -1) || (r > (int) (b->size - 2)))
- {
- b->size = 0;
- return 0;
- }
-
- /* skip over this string's null termination */
- r++;
- b->size -= r;
- b->buf += r;
-
- return r;
-}
-
-/*
- * Initialize local vars from the right source for this platform.
- * Return 0 on success, nonzero on error.
- */
-int
-BCMINITFN (srom_var_init) (sb_t * sbh, uint bustype, void *curmap,
- osl_t * osh, char **vars, uint * count)
-{
- ASSERT (bustype == BUSTYPE (bustype));
- if (vars == NULL || count == NULL)
- return (0);
-
- *vars = NULL;
- *count = 0;
-
- switch (BUSTYPE (bustype))
- {
- case SB_BUS:
- case JTAG_BUS:
- return initvars_srom_sb (sbh, osh, curmap, vars, count);
-
- case PCI_BUS:
- ASSERT (curmap); /* can not be NULL */
- return initvars_srom_pci (sbh, curmap, vars, count);
-
- case PCMCIA_BUS:
- return initvars_cis_pcmcia (sbh, osh, vars, count);
-
-
- default:
- ASSERT (0);
- }
- return (-1);
-}
-
-/* support only 16-bit word read from srom */
-int
-srom_read (sb_t * sbh, uint bustype, void *curmap, osl_t * osh,
- uint byteoff, uint nbytes, uint16 * buf)
-{
- void *srom;
- uint i, off, nw;
-
- ASSERT (bustype == BUSTYPE (bustype));
-
- /* check input - 16-bit access only */
- if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
- return 1;
-
- off = byteoff / 2;
- nw = nbytes / 2;
-
- if (BUSTYPE (bustype) == PCI_BUS)
- {
- if (!curmap)
- return 1;
- srom = (uchar *) curmap + PCI_BAR0_SPROM_OFFSET;
- if (sprom_read_pci (osh, srom, off, buf, nw, FALSE))
- return 1;
- }
- else if (BUSTYPE (bustype) == PCMCIA_BUS)
- {
- for (i = 0; i < nw; i++)
- {
- if (sprom_read_pcmcia
- (osh, (uint16) (off + i), (uint16 *) (buf + i)))
- return 1;
- }
- }
- else if (BUSTYPE (bustype) == SB_BUS)
- {
-#ifdef BCMUSBDEV
- if (SPROMBUS == PCMCIA_BUS)
- {
- uint origidx;
- void *regs;
- int rc;
- bool wasup;
-
- origidx = sb_coreidx (sbh);
- regs = sb_setcore (sbh, SB_PCMCIA, 0);
- ASSERT (regs != NULL);
-
- if (!(wasup = sb_iscoreup (sbh)))
- sb_core_reset (sbh, 0, 0);
-
- rc = get_sb_pcmcia_srom (sbh, osh, regs, byteoff, buf, nbytes);
-
- if (!wasup)
- sb_core_disable (sbh, 0);
-
- sb_setcoreidx (sbh, origidx);
- return rc;
- }
-#endif /* def BCMUSBDEV */
-
- return 1;
- }
- else
- {
- return 1;
- }
-
- return 0;
-}
-
-/* support only 16-bit word write into srom */
-int
-srom_write (sb_t * sbh, uint bustype, void *curmap, osl_t * osh,
- uint byteoff, uint nbytes, uint16 * buf)
-{
- uint16 *srom;
- uint i, nw, crc_range;
- uint16 image[SPROM_SIZE];
- uint8 crc;
- volatile uint32 val32;
-
- ASSERT (bustype == BUSTYPE (bustype));
-
- /* check input - 16-bit access only */
- if ((byteoff & 1) || (nbytes & 1))
- return 1;
-
- if (byteoff == 0x55aa)
- {
- /* Erase request */
- crc_range = 0;
- memset ((void *) image, 0xff, nbytes);
- nw = nbytes / 2;
- }
- else if ((byteoff == 0) &&
- ((nbytes == SPROM_SIZE * 2) ||
- (nbytes == (SPROM_CRC_RANGE * 2)) ||
- (nbytes == (SROM4_WORDS * 2))))
- {
- /* Are we writing the whole thing at once? */
- crc_range = nbytes;
- bcopy ((void *) buf, (void *) image, nbytes);
- nw = nbytes / 2;
- }
- else
- {
- if ((byteoff + nbytes) > (SPROM_SIZE * 2))
- return 1;
-
- if (BUSTYPE (bustype) == PCMCIA_BUS)
- {
- crc_range = SPROM_SIZE * 2;
- }
- else
- {
- crc_range = SPROM_CRC_RANGE * 2; /* Tentative */
- }
-
- nw = crc_range / 2;
- /* read first 64 words from srom */
- if (srom_read (sbh, bustype, curmap, osh, 0, crc_range, image))
- return 1;
- if (image[SROM4_SIGN] == SROM4_SIGNATURE)
- {
- nw = SROM4_WORDS;
- crc_range = nw * 2;
- if (srom_read (sbh, bustype, curmap, osh, 0, crc_range, image))
- return 1;
- }
- /* make changes */
- bcopy ((void *) buf, (void *) &image[byteoff / 2], nbytes);
- }
-
- if (crc_range)
- {
- /* calculate crc */
- htol16_buf (image, crc_range);
- crc = ~hndcrc8 ((uint8 *) image, crc_range - 1, 0xff);
- ltoh16_buf (image, crc_range);
- image[nw - 1] = (crc << 8) | (image[nw - 1] & 0xff);
- }
-
- if (BUSTYPE (bustype) == PCI_BUS)
- {
- srom = (uint16 *) ((uchar *) curmap + PCI_BAR0_SPROM_OFFSET);
- /* enable writes to the SPROM */
- val32 = OSL_PCI_READ_CONFIG (osh, PCI_SPROM_CONTROL, sizeof (uint32));
- val32 |= SPROM_WRITEEN;
- OSL_PCI_WRITE_CONFIG (osh, PCI_SPROM_CONTROL, sizeof (uint32), val32);
- bcm_mdelay (WRITE_ENABLE_DELAY);
- /* write srom */
- for (i = 0; i < nw; i++)
- {
- W_REG (osh, &srom[i], image[i]);
- bcm_mdelay (WRITE_WORD_DELAY);
- }
- /* disable writes to the SPROM */
- OSL_PCI_WRITE_CONFIG (osh, PCI_SPROM_CONTROL, sizeof (uint32), val32 &
- ~SPROM_WRITEEN);
- }
- else if (BUSTYPE (bustype) == PCMCIA_BUS)
- {
- /* enable writes to the SPROM */
- if (sprom_cmd_pcmcia (osh, SROM_WEN))
- return 1;
- bcm_mdelay (WRITE_ENABLE_DELAY);
- /* write srom */
- for (i = 0; i < nw; i++)
- {
- sprom_write_pcmcia (osh, (uint16) (i), image[i]);
- bcm_mdelay (WRITE_WORD_DELAY);
- }
- /* disable writes to the SPROM */
- if (sprom_cmd_pcmcia (osh, SROM_WDS))
- return 1;
- }
- else if (BUSTYPE (bustype) == SB_BUS)
- {
-#ifdef BCMUSBDEV
- if (SPROMBUS == PCMCIA_BUS)
- {
- uint origidx;
- void *regs;
- int rc;
- bool wasup;
-
- origidx = sb_coreidx (sbh);
- regs = sb_setcore (sbh, SB_PCMCIA, 0);
- ASSERT (regs != NULL);
-
- if (!(wasup = sb_iscoreup (sbh)))
- sb_core_reset (sbh, 0, 0);
-
- rc = set_sb_pcmcia_srom (sbh, osh, regs, byteoff, buf, nbytes);
-
- if (!wasup)
- sb_core_disable (sbh, 0);
-
- sb_setcoreidx (sbh, origidx);
- return rc;
- }
-#endif /* def BCMUSBDEV */
- return 1;
- }
- else
- {
- return 1;
- }
-
- bcm_mdelay (WRITE_ENABLE_DELAY);
- return 0;
-}
-
-#ifdef BCMUSBDEV
-#define SB_PCMCIA_READ(osh, regs, fcr) \
- R_REG(osh, (volatile uint8 *)(regs) + 0x600 + (fcr) - 0x700 / 2)
-#define SB_PCMCIA_WRITE(osh, regs, fcr, v) \
- W_REG(osh, (volatile uint8 *)(regs) + 0x600 + (fcr) - 0x700 / 2, v)
-
-/* set PCMCIA srom command register */
-static int
-srom_cmd_sb_pcmcia (osl_t * osh, uint8 * pcmregs, uint8 cmd)
-{
- uint8 status = 0;
- uint wait_cnt = 0;
-
- /* write srom command register */
- SB_PCMCIA_WRITE (osh, pcmregs, SROM_CS, cmd);
-
- /* wait status */
- while (++wait_cnt < 1000000)
- {
- status = SB_PCMCIA_READ (osh, pcmregs, SROM_CS);
- if (status & SROM_DONE)
- return 0;
- OSL_DELAY (1);
- }
-
- BS_ERROR (("sr_cmd: Give up after %d tries, stat = 0x%x\n", wait_cnt,
- status));
- return 1;
-}
-
-/* read a word from the PCMCIA srom over SB */
-static int
-srom_read_sb_pcmcia (osl_t * osh, uint8 * pcmregs, uint16 addr, uint16 * data)
-{
- uint8 addr_l, addr_h, data_l, data_h;
-
- addr_l = (uint8) ((addr * 2) & 0xff);
- addr_h = (uint8) (((addr * 2) >> 8) & 0xff);
-
- /* set address */
- SB_PCMCIA_WRITE (osh, pcmregs, SROM_ADDRH, addr_h);
- SB_PCMCIA_WRITE (osh, pcmregs, SROM_ADDRL, addr_l);
-
- /* do read */
- if (srom_cmd_sb_pcmcia (osh, pcmregs, SROM_READ))
- return 1;
-
- /* read data */
- data_h = SB_PCMCIA_READ (osh, pcmregs, SROM_DATAH);
- data_l = SB_PCMCIA_READ (osh, pcmregs, SROM_DATAL);
- *data = ((uint16) data_h << 8) | data_l;
-
- return 0;
-}
-
-/* write a word to the PCMCIA srom over SB */
-static int
-srom_write_sb_pcmcia (osl_t * osh, uint8 * pcmregs, uint16 addr, uint16 data)
-{
- uint8 addr_l, addr_h, data_l, data_h;
- int rc;
-
- addr_l = (uint8) ((addr * 2) & 0xff);
- addr_h = (uint8) (((addr * 2) >> 8) & 0xff);
-
- /* set address */
- SB_PCMCIA_WRITE (osh, pcmregs, SROM_ADDRH, addr_h);
- SB_PCMCIA_WRITE (osh, pcmregs, SROM_ADDRL, addr_l);
-
- data_l = (uint8) (data & 0xff);
- data_h = (uint8) ((data >> 8) & 0xff);
-
- /* write data */
- SB_PCMCIA_WRITE (osh, pcmregs, SROM_DATAH, data_h);
- SB_PCMCIA_WRITE (osh, pcmregs, SROM_DATAL, data_l);
-
- /* do write */
- rc = srom_cmd_sb_pcmcia (osh, pcmregs, SROM_WRITE);
- OSL_DELAY (20000);
- return rc;
-}
-
-/*
- * Read the srom for the pcmcia-srom over sb case.
- * Return 0 on success, nonzero on error.
- */
-static int
-get_sb_pcmcia_srom (sb_t * sbh, osl_t * osh, uint8 * pcmregs,
- uint boff, uint16 * srom, uint bsz)
-{
- uint i, nw, woff, wsz;
- int err = 0;
-
- /* read must be at word boundary */
- ASSERT ((boff & 1) == 0 && (bsz & 1) == 0);
-
- /* read sprom size and validate the parms */
- if ((nw = srom_size (sbh, osh)) == 0)
- {
- BS_ERROR (("get_sb_pcmcia_srom: sprom size unknown\n"));
- err = -1;
- goto out;
- }
- if (boff + bsz > 2 * nw)
- {
- BS_ERROR (("get_sb_pcmcia_srom: sprom size exceeded\n"));
- err = -2;
- goto out;
- }
-
- /* read in sprom contents */
- for (woff = boff / 2, wsz = bsz / 2, i = 0;
- woff < nw && i < wsz; woff++, i++)
- {
- if (srom_read_sb_pcmcia (osh, pcmregs, (uint16) woff, &srom[i]))
- {
- BS_ERROR (("get_sb_pcmcia_srom: sprom read failed\n"));
- err = -3;
- goto out;
- }
- }
-
-out:
- return err;
-}
-
-/*
- * Write the srom for the pcmcia-srom over sb case.
- * Return 0 on success, nonzero on error.
- */
-static int
-set_sb_pcmcia_srom (sb_t * sbh, osl_t * osh, uint8 * pcmregs,
- uint boff, uint16 * srom, uint bsz)
-{
- uint i, nw, woff, wsz;
- uint16 word;
- uint8 crc;
- int err = 0;
-
- /* write must be at word boundary */
- ASSERT ((boff & 1) == 0 && (bsz & 1) == 0);
-
- /* read sprom size and validate the parms */
- if ((nw = srom_size (sbh, osh)) == 0)
- {
- BS_ERROR (("set_sb_pcmcia_srom: sprom size unknown\n"));
- err = -1;
- goto out;
- }
- if (boff + bsz > 2 * nw)
- {
- BS_ERROR (("set_sb_pcmcia_srom: sprom size exceeded\n"));
- err = -2;
- goto out;
- }
-
- /* enable write */
- if (srom_cmd_sb_pcmcia (osh, pcmregs, SROM_WEN))
- {
- BS_ERROR (("set_sb_pcmcia_srom: sprom wen failed\n"));
- err = -3;
- goto out;
- }
-
- /* write buffer to sprom */
- for (woff = boff / 2, wsz = bsz / 2, i = 0;
- woff < nw && i < wsz; woff++, i++)
- {
- if (srom_write_sb_pcmcia (osh, pcmregs, (uint16) woff, srom[i]))
- {
- BS_ERROR (("set_sb_pcmcia_srom: sprom write failed\n"));
- err = -4;
- goto out;
- }
- }
-
- /* fix crc */
- crc = 0xff;
- for (woff = 0; woff < nw; woff++)
- {
- if (srom_read_sb_pcmcia (osh, pcmregs, (uint16) woff, &word))
- {
- BS_ERROR (("set_sb_pcmcia_srom: sprom fix crc read failed\n"));
- err = -5;
- goto out;
- }
- word = htol16 (word);
- crc = hndcrc8 ((uint8 *) & word, woff != nw - 1 ? 2 : 1, crc);
- }
- word = (~crc << 8) + (ltoh16 (word) & 0xff);
- if (srom_write_sb_pcmcia (osh, pcmregs, (uint16) (woff - 1), word))
- {
- BS_ERROR (("set_sb_pcmcia_srom: sprom fix crc write failed\n"));
- err = -6;
- goto out;
- }
-
- /* disable write */
- if (srom_cmd_sb_pcmcia (osh, pcmregs, SROM_WDS))
- {
- BS_ERROR (("set_sb_pcmcia_srom: sprom wds failed\n"));
- err = -7;
- goto out;
- }
-
-out:
- return err;
-}
-#endif /* def BCMUSBDEV */
-
-int
-srom_parsecis (osl_t * osh, uint8 * pcis[], uint ciscnt, char **vars,
- uint * count)
-{
- char eabuf[32];
- char *base;
- varbuf_t b;
- uint8 *cis, tup, tlen, sromrev = 1;
- int i, j;
- uint varsize;
- bool ag_init = FALSE;
- uint32 w32;
- uint funcid;
- uint cisnum;
- int32 boardnum = -1;
-
- ASSERT (vars);
- ASSERT (count);
-
- base = MALLOC (osh, MAXSZ_NVRAM_VARS);
- ASSERT (base);
- if (!base)
- return -2;
-
- varbuf_init (&b, base, MAXSZ_NVRAM_VARS);
-
- eabuf[0] = '\0';
- for (cisnum = 0; cisnum < ciscnt; cisnum++)
- {
- cis = *pcis++;
- i = 0;
- funcid = 0;
- do
- {
- tup = cis[i++];
- tlen = cis[i++];
- if ((i + tlen) >= CIS_SIZE)
- break;
-
- switch (tup)
- {
- case CISTPL_VERS_1:
- /* assume the strings are good if the version field checks out */
- if (((cis[i + 1] << 8) + cis[i]) >= 0x0008)
- {
- varbuf_append (&b, "manf=%s", &cis[i + 2]);
- varbuf_append (&b, "productname=%s",
- &cis[i + 3 + strlen ((char *) &cis[i + 2])]);
- break;
- }
-
- case CISTPL_MANFID:
- varbuf_append (&b, "manfid=0x%x", (cis[i + 1] << 8) + cis[i]);
- varbuf_append (&b, "prodid=0x%x",
- (cis[i + 3] << 8) + cis[i + 2]);
- break;
-
- case CISTPL_FUNCID:
- funcid = cis[i];
- break;
-
- case CISTPL_FUNCE:
- switch (funcid)
- {
- default:
- /* set macaddr if HNBU_MACADDR not seen yet */
- if (eabuf[0] == '\0' && cis[i] == LAN_NID)
- {
- ASSERT (cis[i + 1] == ETHER_ADDR_LEN);
- bcm_ether_ntoa ((struct ether_addr *) &cis[i + 2],
- eabuf);
- }
- /* set boardnum if HNBU_BOARDNUM not seen yet */
- if (boardnum == -1)
- boardnum = (cis[i + 6] << 8) + cis[i + 7];
- break;
- }
- break;
-
- case CISTPL_CFTABLE:
- varbuf_append (&b, "regwindowsz=%d",
- (cis[i + 7] << 8) | cis[i + 6]);
- break;
-
- case CISTPL_BRCM_HNBU:
- switch (cis[i])
- {
- case HNBU_SROMREV:
- sromrev = cis[i + 1];
- varbuf_append (&b, "sromrev=%d", sromrev);
- break;
-
- case HNBU_CHIPID:
- varbuf_append (&b, "vendid=0x%x", (cis[i + 2] << 8) +
- cis[i + 1]);
- varbuf_append (&b, "devid=0x%x", (cis[i + 4] << 8) +
- cis[i + 3]);
- if (tlen >= 7)
- {
- varbuf_append (&b, "chiprev=%d",
- (cis[i + 6] << 8) + cis[i + 5]);
- }
- if (tlen >= 9)
- {
- varbuf_append (&b, "subvendid=0x%x",
- (cis[i + 8] << 8) + cis[i + 7]);
- }
- if (tlen >= 11)
- {
- varbuf_append (&b, "subdevid=0x%x",
- (cis[i + 10] << 8) + cis[i + 9]);
- /* subdevid doubles for boardtype */
- varbuf_append (&b, "boardtype=0x%x",
- (cis[i + 10] << 8) + cis[i + 9]);
- }
- break;
-
- case HNBU_BOARDREV:
- varbuf_append (&b, "boardrev=0x%x", cis[i + 1]);
- break;
-
- case HNBU_AA:
- varbuf_append (&b, "aa2g=%d", cis[i + 1]);
- break;
-
- case HNBU_AG:
- varbuf_append (&b, "ag0=%d", cis[i + 1]);
- ag_init = TRUE;
- break;
-
- case HNBU_ANT5G:
- varbuf_append (&b, "aa5g=%d", cis[i + 1]);
- varbuf_append (&b, "ag1=%d", cis[i + 2]);
- break;
-
- case HNBU_CC:
- ASSERT (sromrev == 1);
- varbuf_append (&b, "cc=%d", cis[i + 1]);
- break;
-
- case HNBU_PAPARMS:
- if (tlen == 2)
- {
- ASSERT (sromrev == 1);
- varbuf_append (&b, "pa0maxpwr=%d", cis[i + 1]);
- }
- else if (tlen >= 9)
- {
- if (tlen == 10)
- {
- ASSERT (sromrev >= 2);
- varbuf_append (&b, "opo=%d", cis[i + 9]);
- }
- else
- ASSERT (tlen == 9);
-
- for (j = 0; j < 3; j++)
- {
- varbuf_append (&b, "pa0b%d=%d", j,
- (cis[i + (j * 2) + 2] << 8) +
- cis[i + (j * 2) + 1]);
- }
- varbuf_append (&b, "pa0itssit=%d", cis[i + 7]);
- varbuf_append (&b, "pa0maxpwr=%d", cis[i + 8]);
- }
- else
- ASSERT (tlen >= 9);
- break;
-
- case HNBU_PAPARMS5G:
- ASSERT ((sromrev == 2) || (sromrev == 3));
- for (j = 0; j < 3; j++)
- {
- varbuf_append (&b, "pa1b%d=%d", j,
- (cis[i + (j * 2) + 2] << 8) +
- cis[i + (j * 2) + 1]);
- }
- for (j = 3; j < 6; j++)
- {
- varbuf_append (&b, "pa1lob%d=%d", j - 3,
- (cis[i + (j * 2) + 2] << 8) +
- cis[i + (j * 2) + 1]);
- }
- for (j = 6; j < 9; j++)
- {
- varbuf_append (&b, "pa1hib%d=%d", j - 6,
- (cis[i + (j * 2) + 2] << 8) +
- cis[i + (j * 2) + 1]);
- }
- varbuf_append (&b, "pa1itssit=%d", cis[i + 19]);
- varbuf_append (&b, "pa1maxpwr=%d", cis[i + 20]);
- varbuf_append (&b, "pa1lomaxpwr=%d", cis[i + 21]);
- varbuf_append (&b, "pa1himaxpwr=%d", cis[i + 22]);
- break;
-
- case HNBU_OEM:
- ASSERT (sromrev == 1);
- varbuf_append (&b, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
- cis[i + 1], cis[i + 2],
- cis[i + 3], cis[i + 4],
- cis[i + 5], cis[i + 6],
- cis[i + 7], cis[i + 8]);
- break;
-
- case HNBU_BOARDFLAGS:
- w32 = (cis[i + 2] << 8) + cis[i + 1];
- if (tlen == 5)
- w32 |= (cis[i + 4] << 24) + (cis[i + 3] << 16);
- varbuf_append (&b, "boardflags=0x%x", w32);
- break;
-
- case HNBU_LEDS:
- if (cis[i + 1] != 0xff)
- {
- varbuf_append (&b, "ledbh0=%d", cis[i + 1]);
- }
- if (cis[i + 2] != 0xff)
- {
- varbuf_append (&b, "ledbh1=%d", cis[i + 2]);
- }
- if (cis[i + 3] != 0xff)
- {
- varbuf_append (&b, "ledbh2=%d", cis[i + 3]);
- }
- if (cis[i + 4] != 0xff)
- {
- varbuf_append (&b, "ledbh3=%d", cis[i + 4]);
- }
- break;
-
- case HNBU_CCODE:
- ASSERT (sromrev > 1);
- if ((cis[i + 1] == 0) || (cis[i + 2] == 0))
- varbuf_append (&b, "ccode=");
- else
- varbuf_append (&b, "ccode=%c%c", cis[i + 1], cis[i + 2]);
- varbuf_append (&b, "cctl=0x%x", cis[i + 3]);
- break;
-
- case HNBU_CCKPO:
- ASSERT (sromrev > 2);
- varbuf_append (&b, "cckpo=0x%x",
- (cis[i + 2] << 8) | cis[i + 1]);
- break;
-
- case HNBU_OFDMPO:
- ASSERT (sromrev > 2);
- varbuf_append (&b, "ofdmpo=0x%x",
- (cis[i + 4] << 24) |
- (cis[i + 3] << 16) |
- (cis[i + 2] << 8) | cis[i + 1]);
- break;
-
- case HNBU_RDLID:
- varbuf_append (&b, "rdlid=0x%x",
- (cis[i + 2] << 8) | cis[i + 1]);
- break;
-
- case HNBU_RDLRNDIS:
- varbuf_append (&b, "rdlrndis=%d", cis[i + 1]);
- break;
-
- case HNBU_RDLRWU:
- varbuf_append (&b, "rdlrwu=%d", cis[i + 1]);
- break;
-
- case HNBU_RDLSN:
- varbuf_append (&b, "rdlsn=%d",
- (cis[i + 2] << 8) | cis[i + 1]);
- break;
-
- case HNBU_XTALFREQ:
- varbuf_append (&b, "xtalfreq=%d",
- (cis[i + 4] << 24) |
- (cis[i + 3] << 16) |
- (cis[i + 2] << 8) | cis[i + 1]);
- break;
-
- case HNBU_RSSISMBXA2G:
- ASSERT (sromrev == 3);
- varbuf_append (&b, "rssismf2g=%d", cis[i + 1] & 0xf);
- varbuf_append (&b, "rssismc2g=%d", (cis[i + 1] >> 4) & 0xf);
- varbuf_append (&b, "rssisav2g=%d", cis[i + 2] & 0x7);
- varbuf_append (&b, "bxa2g=%d", (cis[i + 2] >> 3) & 0x3);
- break;
-
- case HNBU_RSSISMBXA5G:
- ASSERT (sromrev == 3);
- varbuf_append (&b, "rssismf5g=%d", cis[i + 1] & 0xf);
- varbuf_append (&b, "rssismc5g=%d", (cis[i + 1] >> 4) & 0xf);
- varbuf_append (&b, "rssisav5g=%d", cis[i + 2] & 0x7);
- varbuf_append (&b, "bxa5g=%d", (cis[i + 2] >> 3) & 0x3);
- break;
-
- case HNBU_TRI2G:
- ASSERT (sromrev == 3);
- varbuf_append (&b, "tri2g=%d", cis[i + 1]);
- break;
-
- case HNBU_TRI5G:
- ASSERT (sromrev == 3);
- varbuf_append (&b, "tri5gl=%d", cis[i + 1]);
- varbuf_append (&b, "tri5g=%d", cis[i + 2]);
- varbuf_append (&b, "tri5gh=%d", cis[i + 3]);
- break;
-
- case HNBU_RXPO2G:
- ASSERT (sromrev == 3);
- varbuf_append (&b, "rxpo2g=%d", cis[i + 1]);
- break;
-
- case HNBU_RXPO5G:
- ASSERT (sromrev == 3);
- varbuf_append (&b, "rxpo5g=%d", cis[i + 1]);
- break;
-
- case HNBU_BOARDNUM:
- boardnum = (cis[i + 2] << 8) + cis[i + 1];
- break;
-
- case HNBU_MACADDR:
- bcm_ether_ntoa ((struct ether_addr *) &cis[i + 1], eabuf);
- break;
-
- case HNBU_BOARDTYPE:
- varbuf_append (&b, "boardtype=0x%x",
- (cis[i + 2] << 8) + cis[i + 1]);
- break;
-
-#if defined(BCMCCISSR3)
- case HNBU_SROM3SWRGN:
- {
- uint16 srom[35];
- uint8 srev = cis[i + 1 + 70];
- ASSERT (srev == 3);
- /* make tuple value 16-bit aligned and parse it */
- bcopy (&cis[i + 1], srom, sizeof (srom));
- _initvars_srom_pci (srev, srom, SROM3_SWRGN_OFF, &b);
- /* create extra variables */
- varbuf_append (&b, "vendid=0x%x",
- (cis[i + 1 + 73] << 8) + cis[i + 1 + 72]);
- varbuf_append (&b, "devid=0x%x",
- (cis[i + 1 + 75] << 8) + cis[i + 1 + 74]);
- varbuf_append (&b, "xtalfreq=%d",
- (cis[i + 1 + 77] << 8) + cis[i + 1 + 76]);
- /* 2.4G antenna gain is included in SROM */
- ag_init = TRUE;
- /* Ethernet MAC address is included in SROM */
- eabuf[0] = 0;
- boardnum = -1;
- break;
- }
-#endif
- }
- break;
- }
- i += tlen;
- }
- while (tup != CISTPL_END);
- }
-
- if (boardnum != -1)
- {
- varbuf_append (&b, "boardnum=%d", boardnum);
- }
-
- if (eabuf[0])
- {
- varbuf_append (&b, "macaddr=%s", eabuf);
- }
-
- /* if there is no antenna gain field, set default */
- if (ag_init == FALSE)
- {
- varbuf_append (&b, "ag0=%d", 0xff);
- }
-
- /* final nullbyte terminator */
- ASSERT (b.size >= 1);
- *b.buf++ = '\0';
- varsize = (uint) (b.buf - base);
- ASSERT (varsize < MAXSZ_NVRAM_VARS);
- if (varsize < MAXSZ_NVRAM_VARS)
- {
- char *new_buf;
- new_buf = (char *) MALLOC (osh, varsize);
- ASSERT (new_buf);
- if (new_buf)
- {
- bcopy (base, new_buf, varsize);
- MFREE (osh, base, MAXSZ_NVRAM_VARS);
- base = new_buf;
- }
- }
-
- *vars = base;
- *count = varsize;
-
- return (0);
-}
-
-
-/* set PCMCIA sprom command register */
-static int
-sprom_cmd_pcmcia (osl_t * osh, uint8 cmd)
-{
- uint8 status = 0;
- uint wait_cnt = 1000;
-
- /* write sprom command register */
- OSL_PCMCIA_WRITE_ATTR (osh, SROM_CS, &cmd, 1);
-
- /* wait status */
- while (wait_cnt--)
- {
- OSL_PCMCIA_READ_ATTR (osh, SROM_CS, &status, 1);
- if (status & SROM_DONE)
- return 0;
- }
-
- return 1;
-}
-
-/* read a word from the PCMCIA srom */
-static int
-sprom_read_pcmcia (osl_t * osh, uint16 addr, uint16 * data)
-{
- uint8 addr_l, addr_h, data_l, data_h;
-
- addr_l = (uint8) ((addr * 2) & 0xff);
- addr_h = (uint8) (((addr * 2) >> 8) & 0xff);
-
- /* set address */
- OSL_PCMCIA_WRITE_ATTR (osh, SROM_ADDRH, &addr_h, 1);
- OSL_PCMCIA_WRITE_ATTR (osh, SROM_ADDRL, &addr_l, 1);
-
- /* do read */
- if (sprom_cmd_pcmcia (osh, SROM_READ))
- return 1;
-
- /* read data */
- data_h = data_l = 0;
- OSL_PCMCIA_READ_ATTR (osh, SROM_DATAH, &data_h, 1);
- OSL_PCMCIA_READ_ATTR (osh, SROM_DATAL, &data_l, 1);
-
- *data = (data_h << 8) | data_l;
- return 0;
-}
-
-/* write a word to the PCMCIA srom */
-static int
-sprom_write_pcmcia (osl_t * osh, uint16 addr, uint16 data)
-{
- uint8 addr_l, addr_h, data_l, data_h;
-
- addr_l = (uint8) ((addr * 2) & 0xff);
- addr_h = (uint8) (((addr * 2) >> 8) & 0xff);
- data_l = (uint8) (data & 0xff);
- data_h = (uint8) ((data >> 8) & 0xff);
-
- /* set address */
- OSL_PCMCIA_WRITE_ATTR (osh, SROM_ADDRH, &addr_h, 1);
- OSL_PCMCIA_WRITE_ATTR (osh, SROM_ADDRL, &addr_l, 1);
-
- /* write data */
- OSL_PCMCIA_WRITE_ATTR (osh, SROM_DATAH, &data_h, 1);
- OSL_PCMCIA_WRITE_ATTR (osh, SROM_DATAL, &data_l, 1);
-
- /* do write */
- return sprom_cmd_pcmcia (osh, SROM_WRITE);
-}
-
-/*
- * Read in and validate sprom.
- * Return 0 on success, nonzero on error.
- */
-static int
-sprom_read_pci (osl_t * osh, uint16 * sprom, uint wordoff, uint16 * buf,
- uint nwords, bool check_crc)
-{
- int err = 0;
- uint i;
-
- /* read the sprom */
- for (i = 0; i < nwords; i++)
- {
-#ifdef BCMQT
- buf[i] = R_REG (osh, &sprom[wordoff + i]);
-#endif
- buf[i] = R_REG (osh, &sprom[wordoff + i]);
- }
-
- if (check_crc)
- {
- if (buf[0] == 0xffff)
- {
- /* The hardware thinks that an srom that starts with 0xffff
- * is blank, regardless of the rest of the content, so declare
- * it bad.
- */
- BS_ERROR (("%s: buf[0] = 0x%x, returning bad-crc\n", __FUNCTION__,
- buf[0]));
- return 1;
- }
-
- /* fixup the endianness so crc8 will pass */
- htol16_buf (buf, nwords * 2);
- if (hndcrc8 ((uint8 *) buf, nwords * 2, 0xff) != 0x9f)
- err = 1;
- /* now correct the endianness of the byte array */
- ltoh16_buf (buf, nwords * 2);
- }
-
- return err;
-}
-
-/*
-* Create variable table from memory.
-* Return 0 on success, nonzero on error.
-*/
-static int
-BCMINITFN (initvars_table) (osl_t * osh, char *start, char *end, char **vars,
- uint * count)
-{
- int c = (int) (end - start);
-
- /* do it only when there is more than just the null string */
- if (c > 1)
- {
- char *vp = MALLOC (osh, c);
- ASSERT (vp);
- if (!vp)
- return BCME_NOMEM;
- bcopy (start, vp, c);
- *vars = vp;
- *count = c;
- }
- else
- {
- *vars = NULL;
- *count = 0;
- }
-
- return 0;
-}
-
-/*
- * Find variables with <devpath> from flash. 'base' points to the beginning
- * of the table upon enter and to the end of the table upon exit when success.
- * Return 0 on success, nonzero on error.
- */
-static int
-initvars_flash (sb_t * sbh, osl_t * osh, char **base, uint len)
-{
- char *vp = *base;
- char *flash;
- int err;
- char *s;
- uint l, dl, copy_len;
- char devpath[SB_DEVPATH_BUFSZ];
-
- /* allocate memory and read in flash */
- if (!(flash = MALLOC (osh, NVRAM_SPACE)))
- return BCME_NOMEM;
- if ((err = nvram_getall (flash, NVRAM_SPACE)))
- goto exit;
-
- sb_devpath (sbh, devpath, sizeof (devpath));
-
- /* grab vars with the <devpath> prefix in name */
- dl = strlen (devpath);
- for (s = flash; s && *s; s += l + 1)
- {
- l = strlen (s);
-
- /* skip non-matching variable */
- if (strncmp (s, devpath, dl))
- continue;
-
- /* is there enough room to copy? */
- copy_len = l - dl + 1;
- if (len < copy_len)
- {
- err = BCME_BUFTOOSHORT;
- goto exit;
- }
-
- /* no prefix, just the name=value */
- strncpy (vp, &s[dl], copy_len);
- vp += copy_len;
- len -= copy_len;
- }
-
- /* add null string as terminator */
- if (len < 1)
- {
- err = BCME_BUFTOOSHORT;
- goto exit;
- }
- *vp++ = '\0';
-
- *base = vp;
-
-exit:MFREE (osh, flash, NVRAM_SPACE);
- return err;
-}
-
-#if !defined(BCMUSBDEV) && !defined(BCMSDIODEV)
-/*
- * Initialize nonvolatile variable table from flash.
- * Return 0 on success, nonzero on error.
- */
-static int
-initvars_flash_sb (sb_t * sbh, char **vars, uint * count)
-{
- osl_t *osh = sb_osh (sbh);
- char *vp, *base;
- int err;
-
- ASSERT (vars);
- ASSERT (count);
-
- base = vp = MALLOC (osh, MAXSZ_NVRAM_VARS);
- ASSERT (vp);
- if (!vp)
- return BCME_NOMEM;
-
- if ((err = initvars_flash (sbh, osh, &vp, MAXSZ_NVRAM_VARS)) == 0)
- err = initvars_table (osh, base, vp, vars, count);
-
- MFREE (osh, base, MAXSZ_NVRAM_VARS);
-
- return err;
-}
-#endif /* !BCMUSBDEV && !BCMSDIODEV */
-
-#ifdef WLTEST
-char mfgsromvars[256];
-char *defaultsromvars = "il0macaddr=00:11:22:33:44:51\0"
- "et0macaddr=00:11:22:33:44:52\0"
- "et1macaddr=00:11:22:33:44:53\0"
- "boardtype=0xffff\0"
- "boardrev=0x10\0" "boardflags=8\0" "sromrev=2\0" "aa2g=3\0" "\0";
-#define MFGSROM_DEFVARSLEN 149 /* default srom len */
-#endif /* WL_TEST */
-
-/*
- * Initialize nonvolatile variable table from sprom.
- * Return 0 on success, nonzero on error.
- */
-
-typedef struct
-{
- const char *name;
- uint32 revmask;
- uint32 flags;
- uint16 off;
- uint16 mask;
-} sromvar_t;
-
-#define SRFL_MORE 1 /* value continues as described by the next entry */
-#define SRFL_NOFFS 2 /* value bits can't be all one's */
-#define SRFL_PRHEX 4 /* value is in hexdecimal format */
-#define SRFL_PRSIGN 8 /* value is in signed decimal format */
-#define SRFL_CCODE 0x10 /* value is in country code format */
-#define SRFL_ETHADDR 0x20 /* value is an Ethernet address */
-#define SRFL_LEDDC 0x40 /* value is an LED duty cycle */
-
-/* Assumptions:
- * - Ethernet address spins across 3 consective words
- *
- * Table rules:
- * - Add multiple entries next to each other if a value spins across multiple words
- * (even multiple fields in the same word) with each entry except the last having
- * it's SRFL_MORE bit set.
- * - Ethernet address entry does not follow above rule and must not have SRFL_MORE
- * bit set. Its SRFL_ETHADDR bit implies it takes multiple words.
- * - The last entry's name field must be NULL to indicate the end of the table. Other
- * entries must have non-NULL name.
- */
-
-static const sromvar_t pci_sromvars[] = {
- {"boardrev", 0x0000000e, SRFL_PRHEX, SROM_AABREV, SROM_BR_MASK},
- {"boardrev", 0x000000f0, SRFL_PRHEX, SROM4_BREV, 0xffff},
- {"boardrev", 0xffffff00, SRFL_PRHEX, SROM8_BREV, 0xffff},
- {"boardflags", 0x00000002, SRFL_PRHEX, SROM_BFL, 0xffff},
- {"boardflags", 0x00000004, SRFL_PRHEX | SRFL_MORE, SROM_BFL, 0xffff},
- {"", 0, 0, SROM_BFL2, 0xffff},
- {"boardflags", 0x00000008, SRFL_PRHEX | SRFL_MORE, SROM_BFL, 0xffff},
- {"", 0, 0, SROM3_BFL2, 0xffff},
- {"boardflags", 0x00000010, SRFL_PRHEX | SRFL_MORE, SROM4_BFL0, 0xffff},
- {"", 0, 0, SROM4_BFL1, 0xffff},
- {"boardflags", 0x000000e0, SRFL_PRHEX | SRFL_MORE, SROM5_BFL0, 0xffff},
- {"", 0, 0, SROM5_BFL1, 0xffff},
- {"boardflags", 0xffffff00, SRFL_PRHEX | SRFL_MORE, SROM8_BFL0, 0xffff},
- {"", 0, 0, SROM8_BFL1, 0xffff},
- {"boardflags2", 0x00000010, SRFL_PRHEX | SRFL_MORE, SROM4_BFL2, 0xffff},
- {"", 0, 0, SROM4_BFL3, 0xffff},
- {"boardflags2", 0x000000e0, SRFL_PRHEX | SRFL_MORE, SROM5_BFL2, 0xffff},
- {"", 0, 0, SROM5_BFL3, 0xffff},
- {"boardflags2", 0xffffff00, SRFL_PRHEX | SRFL_MORE, SROM8_BFL2, 0xffff},
- {"", 0, 0, SROM8_BFL3, 0xffff},
- {"boardtype", 0xfffffffc, SRFL_PRHEX, SROM_SSID, 0xffff},
- {"boardnum", 0x00000006, 0, SROM_MACLO_IL0, 0xffff},
- {"boardnum", 0x00000008, 0, SROM3_MACLO, 0xffff},
- {"boardnum", 0x00000010, 0, SROM4_MACLO, 0xffff},
- {"boardnum", 0x000000e0, 0, SROM5_MACLO, 0xffff},
- {"boardnum", 0xffffff00, 0, SROM8_MACLO, 0xffff},
- {"cc", 0x00000002, 0, SROM_AABREV, SROM_CC_MASK},
- {"regrev", 0x00000008, 0, SROM_OPO, 0xff00},
- {"regrev", 0x00000010, 0, SROM4_REGREV, 0xff},
- {"regrev", 0x000000e0, 0, SROM5_REGREV, 0xff},
- {"regrev", 0xffffff00, 0, SROM8_REGREV, 0xff},
- {"ledbh0", 0x0000000e, SRFL_NOFFS, SROM_LEDBH10, 0xff},
- {"ledbh1", 0x0000000e, SRFL_NOFFS, SROM_LEDBH10, 0xff00},
- {"ledbh2", 0x0000000e, SRFL_NOFFS, SROM_LEDBH32, 0xff},
- {"ledbh3", 0x0000000e, SRFL_NOFFS, SROM_LEDBH32, 0xff00},
- {"ledbh0", 0x00000010, SRFL_NOFFS, SROM4_LEDBH10, 0xff},
- {"ledbh1", 0x00000010, SRFL_NOFFS, SROM4_LEDBH10, 0xff00},
- {"ledbh2", 0x00000010, SRFL_NOFFS, SROM4_LEDBH32, 0xff},
- {"ledbh3", 0x00000010, SRFL_NOFFS, SROM4_LEDBH32, 0xff00},
- {"ledbh0", 0x000000e0, SRFL_NOFFS, SROM5_LEDBH10, 0xff},
- {"ledbh1", 0x000000e0, SRFL_NOFFS, SROM5_LEDBH10, 0xff00},
- {"ledbh2", 0x000000e0, SRFL_NOFFS, SROM5_LEDBH32, 0xff},
- {"ledbh3", 0x000000e0, SRFL_NOFFS, SROM5_LEDBH32, 0xff00},
- {"ledbh0", 0xffffff00, SRFL_NOFFS, SROM8_LEDBH10, 0xff},
- {"ledbh1", 0xffffff00, SRFL_NOFFS, SROM8_LEDBH10, 0xff00},
- {"ledbh2", 0xffffff00, SRFL_NOFFS, SROM8_LEDBH32, 0xff},
- {"ledbh3", 0xffffff00, SRFL_NOFFS, SROM8_LEDBH32, 0xff00},
- {"pa0b0", 0x0000000e, SRFL_PRHEX, SROM_WL0PAB0, 0xffff},
- {"pa0b1", 0x0000000e, SRFL_PRHEX, SROM_WL0PAB1, 0xffff},
- {"pa0b2", 0x0000000e, SRFL_PRHEX, SROM_WL0PAB2, 0xffff},
- {"pa0itssit", 0x0000000e, 0, SROM_ITT, 0xff},
- {"pa0maxpwr", 0x0000000e, 0, SROM_WL10MAXP, 0xff},
- {"pa0b0", 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB0, 0xffff},
- {"pa0b1", 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB1, 0xffff},
- {"pa0b2", 0xffffff00, SRFL_PRHEX, SROM8_W0_PAB2, 0xffff},
- {"pa0itssit", 0xffffff00, 0, SROM8_W0_ITTMAXP, 0xff00},
- {"pa0maxpwr", 0xffffff00, 0, SROM8_W0_ITTMAXP, 0xff},
- {"opo", 0x0000000c, 0, SROM_OPO, 0xff},
- {"opo", 0xffffff00, 0, SROM8_2G_OFDMPO, 0xff},
- {"aa2g", 0x0000000e, 0, SROM_AABREV, SROM_AA0_MASK},
- {"aa2g", 0x000000f0, 0, SROM4_AA, 0xff},
- {"aa2g", 0xffffff00, 0, SROM8_AA, 0xff},
- {"aa5g", 0x0000000e, 0, SROM_AABREV, SROM_AA1_MASK},
- {"aa5g", 0x000000f0, 0, SROM4_AA, 0xff00},
- {"aa5g", 0xffffff00, 0, SROM8_AA, 0xff00},
- {"ag0", 0x0000000e, 0, SROM_AG10, 0xff},
- {"ag1", 0x0000000e, 0, SROM_AG10, 0xff00},
- {"ag0", 0x000000f0, 0, SROM4_AG10, 0xff},
- {"ag1", 0x000000f0, 0, SROM4_AG10, 0xff00},
- {"ag2", 0x000000f0, 0, SROM4_AG32, 0xff},
- {"ag3", 0x000000f0, 0, SROM4_AG32, 0xff00},
- {"ag0", 0xffffff00, 0, SROM8_AG10, 0xff},
- {"ag1", 0xffffff00, 0, SROM8_AG10, 0xff00},
- {"ag2", 0xffffff00, 0, SROM8_AG32, 0xff},
- {"ag3", 0xffffff00, 0, SROM8_AG32, 0xff00},
- {"pa1b0", 0x0000000e, SRFL_PRHEX, SROM_WL1PAB0, 0xffff},
- {"pa1b1", 0x0000000e, SRFL_PRHEX, SROM_WL1PAB1, 0xffff},
- {"pa1b2", 0x0000000e, SRFL_PRHEX, SROM_WL1PAB2, 0xffff},
- {"pa1lob0", 0x0000000c, SRFL_PRHEX, SROM_WL1LPAB0, 0xffff},
- {"pa1lob1", 0x0000000c, SRFL_PRHEX, SROM_WL1LPAB1, 0xffff},
- {"pa1lob2", 0x0000000c, SRFL_PRHEX, SROM_WL1LPAB2, 0xffff},
- {"pa1hib0", 0x0000000c, SRFL_PRHEX, SROM_WL1HPAB0, 0xffff},
- {"pa1hib1", 0x0000000c, SRFL_PRHEX, SROM_WL1HPAB1, 0xffff},
- {"pa1hib2", 0x0000000c, SRFL_PRHEX, SROM_WL1HPAB2, 0xffff},
- {"pa1itssit", 0x0000000e, 0, SROM_ITT, 0xff00},
- {"pa1maxpwr", 0x0000000e, 0, SROM_WL10MAXP, 0xff00},
- {"pa1lomaxpwr", 0x0000000c, 0, SROM_WL1LHMAXP, 0xff00},
- {"pa1himaxpwr", 0x0000000c, 0, SROM_WL1LHMAXP, 0xff},
- {"pa1b0", 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0, 0xffff},
- {"pa1b1", 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1, 0xffff},
- {"pa1b2", 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2, 0xffff},
- {"pa1lob0", 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0_LC, 0xffff},
- {"pa1lob1", 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1_LC, 0xffff},
- {"pa1lob2", 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2_LC, 0xffff},
- {"pa1hib0", 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB0_HC, 0xffff},
- {"pa1hib1", 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB1_HC, 0xffff},
- {"pa1hib2", 0xffffff00, SRFL_PRHEX, SROM8_W1_PAB2_HC, 0xffff},
- {"pa1itssit", 0xffffff00, 0, SROM8_W1_ITTMAXP, 0xff00},
- {"pa1maxpwr", 0xffffff00, 0, SROM8_W1_ITTMAXP, 0xff},
- {"pa1lomaxpwr", 0xffffff00, 0, SROM8_W1_MAXP_LCHC, 0xff00},
- {"pa1himaxpwr", 0xffffff00, 0, SROM8_W1_MAXP_LCHC, 0xff},
- {"bxa2g", 0x00000008, 0, SROM_BXARSSI2G, 0x1800},
- {"rssisav2g", 0x00000008, 0, SROM_BXARSSI2G, 0x0700},
- {"rssismc2g", 0x00000008, 0, SROM_BXARSSI2G, 0x00f0},
- {"rssismf2g", 0x00000008, 0, SROM_BXARSSI2G, 0x000f},
- {"bxa2g", 0xffffff00, 0, SROM8_BXARSSI2G, 0x1800},
- {"rssisav2g", 0xffffff00, 0, SROM8_BXARSSI2G, 0x0700},
- {"rssismc2g", 0xffffff00, 0, SROM8_BXARSSI2G, 0x00f0},
- {"rssismf2g", 0xffffff00, 0, SROM8_BXARSSI2G, 0x000f},
- {"bxa5g", 0x00000008, 0, SROM_BXARSSI5G, 0x1800},
- {"rssisav5g", 0x00000008, 0, SROM_BXARSSI5G, 0x0700},
- {"rssismc5g", 0x00000008, 0, SROM_BXARSSI5G, 0x00f0},
- {"rssismf5g", 0x00000008, 0, SROM_BXARSSI5G, 0x000f},
- {"bxa5g", 0xffffff00, 0, SROM8_BXARSSI5G, 0x1800},
- {"rssisav5g", 0xffffff00, 0, SROM8_BXARSSI5G, 0x0700},
- {"rssismc5g", 0xffffff00, 0, SROM8_BXARSSI5G, 0x00f0},
- {"rssismf5g", 0xffffff00, 0, SROM8_BXARSSI5G, 0x000f},
- {"tri2g", 0x00000008, 0, SROM_TRI52G, 0xff},
- {"tri5g", 0x00000008, 0, SROM_TRI52G, 0xff00},
- {"tri5gl", 0x00000008, 0, SROM_TRI5GHL, 0xff},
- {"tri5gh", 0x00000008, 0, SROM_TRI5GHL, 0xff00},
- {"tri2g", 0xffffff00, 0, SROM8_TRI52G, 0xff},
- {"tri5g", 0xffffff00, 0, SROM8_TRI52G, 0xff00},
- {"tri5gl", 0xffffff00, 0, SROM8_TRI5GHL, 0xff},
- {"tri5gh", 0xffffff00, 0, SROM8_TRI5GHL, 0xff00},
- {"rxpo2g", 0x00000008, SRFL_PRSIGN, SROM_RXPO52G, 0xff},
- {"rxpo5g", 0x00000008, SRFL_PRSIGN, SROM_RXPO52G, 0xff00},
- {"rxpo2g", 0xffffff00, SRFL_PRSIGN, SROM8_RXPO52G, 0xff},
- {"rxpo5g", 0xffffff00, SRFL_PRSIGN, SROM8_RXPO52G, 0xff00},
- {"txchain", 0x000000f0, SRFL_NOFFS, SROM4_TXRXC, SROM4_TXCHAIN_MASK},
- {"rxchain", 0x000000f0, SRFL_NOFFS, SROM4_TXRXC, SROM4_RXCHAIN_MASK},
- {"antswitch", 0x000000f0, SRFL_NOFFS, SROM4_TXRXC, SROM4_SWITCH_MASK},
- {"txchain", 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, SROM4_TXCHAIN_MASK},
- {"rxchain", 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, SROM4_RXCHAIN_MASK},
- {"antswitch", 0xffffff00, SRFL_NOFFS, SROM8_TXRXC, SROM4_SWITCH_MASK},
- {"txpid2ga0", 0x000000f0, 0, SROM4_TXPID2G, 0xff},
- {"txpid2ga1", 0x000000f0, 0, SROM4_TXPID2G, 0xff00},
- {"txpid2ga2", 0x000000f0, 0, SROM4_TXPID2G + 1, 0xff},
- {"txpid2ga3", 0x000000f0, 0, SROM4_TXPID2G + 1, 0xff00},
- {"txpid5ga0", 0x000000f0, 0, SROM4_TXPID5G, 0xff},
- {"txpid5ga1", 0x000000f0, 0, SROM4_TXPID5G, 0xff00},
- {"txpid5ga2", 0x000000f0, 0, SROM4_TXPID5G + 1, 0xff},
- {"txpid5ga3", 0x000000f0, 0, SROM4_TXPID5G + 1, 0xff00},
- {"txpid5gla0", 0x000000f0, 0, SROM4_TXPID5GL, 0xff},
- {"txpid5gla1", 0x000000f0, 0, SROM4_TXPID5GL, 0xff00},
- {"txpid5gla2", 0x000000f0, 0, SROM4_TXPID5GL + 1, 0xff},
- {"txpid5gla3", 0x000000f0, 0, SROM4_TXPID5GL + 1, 0xff00},
- {"txpid5gha0", 0x000000f0, 0, SROM4_TXPID5GH, 0xff},
- {"txpid5gha1", 0x000000f0, 0, SROM4_TXPID5GH, 0xff00},
- {"txpid5gha2", 0x000000f0, 0, SROM4_TXPID5GH + 1, 0xff},
- {"txpid5gha3", 0x000000f0, 0, SROM4_TXPID5GH + 1, 0xff00},
- {"cck2gpo", 0x000000f0, 0, SROM4_2G_CCKPO, 0xffff},
- {"cck2gpo", 0xffffff00, 0, SROM8_2G_CCKPO, 0xffff},
- {"ofdm2gpo", 0x000000f0, SRFL_MORE, SROM4_2G_OFDMPO, 0xffff},
- {"", 0, 0, SROM4_2G_OFDMPO + 1, 0xffff},
- {"ofdm5gpo", 0x000000f0, SRFL_MORE, SROM4_5G_OFDMPO, 0xffff},
- {"", 0, 0, SROM4_5G_OFDMPO + 1, 0xffff},
- {"ofdm5glpo", 0x000000f0, SRFL_MORE, SROM4_5GL_OFDMPO, 0xffff},
- {"", 0, 0, SROM4_5GL_OFDMPO + 1, 0xffff},
- {"ofdm5ghpo", 0x000000f0, SRFL_MORE, SROM4_5GH_OFDMPO, 0xffff},
- {"", 0, 0, SROM4_5GH_OFDMPO + 1, 0xffff},
- {"ofdm2gpo", 0xffffff00, SRFL_MORE, SROM8_2G_OFDMPO, 0xffff},
- {"", 0, 0, SROM8_2G_OFDMPO + 1, 0xffff},
- {"ofdm5gpo", 0xffffff00, SRFL_MORE, SROM8_5G_OFDMPO, 0xffff},
- {"", 0, 0, SROM8_5G_OFDMPO + 1, 0xffff},
- {"ofdm5glpo", 0xffffff00, SRFL_MORE, SROM8_5GL_OFDMPO, 0xffff},
- {"", 0, 0, SROM8_5GL_OFDMPO + 1, 0xffff},
- {"ofdm5ghpo", 0xffffff00, SRFL_MORE, SROM8_5GH_OFDMPO, 0xffff},
- {"", 0, 0, SROM8_5GH_OFDMPO + 1, 0xffff},
- {"mcs2gpo0", 0x000000f0, 0, SROM4_2G_MCSPO, 0xffff},
- {"mcs2gpo1", 0x000000f0, 0, SROM4_2G_MCSPO + 1, 0xffff},
- {"mcs2gpo2", 0x000000f0, 0, SROM4_2G_MCSPO + 2, 0xffff},
- {"mcs2gpo3", 0x000000f0, 0, SROM4_2G_MCSPO + 3, 0xffff},
- {"mcs2gpo4", 0x000000f0, 0, SROM4_2G_MCSPO + 4, 0xffff},
- {"mcs2gpo5", 0x000000f0, 0, SROM4_2G_MCSPO + 5, 0xffff},
- {"mcs2gpo6", 0x000000f0, 0, SROM4_2G_MCSPO + 6, 0xffff},
- {"mcs2gpo7", 0x000000f0, 0, SROM4_2G_MCSPO + 7, 0xffff},
- {"mcs5gpo0", 0x000000f0, 0, SROM4_5G_MCSPO, 0xffff},
- {"mcs5gpo1", 0x000000f0, 0, SROM4_5G_MCSPO + 1, 0xffff},
- {"mcs5gpo2", 0x000000f0, 0, SROM4_5G_MCSPO + 2, 0xffff},
- {"mcs5gpo3", 0x000000f0, 0, SROM4_5G_MCSPO + 3, 0xffff},
- {"mcs5gpo4", 0x000000f0, 0, SROM4_5G_MCSPO + 4, 0xffff},
- {"mcs5gpo5", 0x000000f0, 0, SROM4_5G_MCSPO + 5, 0xffff},
- {"mcs5gpo6", 0x000000f0, 0, SROM4_5G_MCSPO + 6, 0xffff},
- {"mcs5gpo7", 0x000000f0, 0, SROM4_5G_MCSPO + 7, 0xffff},
- {"mcs5glpo0", 0x000000f0, 0, SROM4_5GL_MCSPO, 0xffff},
- {"mcs5glpo1", 0x000000f0, 0, SROM4_5GL_MCSPO + 1, 0xffff},
- {"mcs5glpo2", 0x000000f0, 0, SROM4_5GL_MCSPO + 2, 0xffff},
- {"mcs5glpo3", 0x000000f0, 0, SROM4_5GL_MCSPO + 3, 0xffff},
- {"mcs5glpo4", 0x000000f0, 0, SROM4_5GL_MCSPO + 4, 0xffff},
- {"mcs5glpo5", 0x000000f0, 0, SROM4_5GL_MCSPO + 5, 0xffff},
- {"mcs5glpo6", 0x000000f0, 0, SROM4_5GL_MCSPO + 6, 0xffff},
- {"mcs5glpo7", 0x000000f0, 0, SROM4_5GL_MCSPO + 7, 0xffff},
- {"mcs5ghpo0", 0x000000f0, 0, SROM4_5GH_MCSPO, 0xffff},
- {"mcs5ghpo1", 0x000000f0, 0, SROM4_5GH_MCSPO + 1, 0xffff},
- {"mcs5ghpo2", 0x000000f0, 0, SROM4_5GH_MCSPO + 2, 0xffff},
- {"mcs5ghpo3", 0x000000f0, 0, SROM4_5GH_MCSPO + 3, 0xffff},
- {"mcs5ghpo4", 0x000000f0, 0, SROM4_5GH_MCSPO + 4, 0xffff},
- {"mcs5ghpo5", 0x000000f0, 0, SROM4_5GH_MCSPO + 5, 0xffff},
- {"mcs5ghpo6", 0x000000f0, 0, SROM4_5GH_MCSPO + 6, 0xffff},
- {"mcs5ghpo7", 0x000000f0, 0, SROM4_5GH_MCSPO + 7, 0xffff},
- {"mcs2gpo0", 0xffffff00, 0, SROM8_2G_MCSPO, 0xffff},
- {"mcs2gpo1", 0xffffff00, 0, SROM8_2G_MCSPO + 1, 0xffff},
- {"mcs2gpo2", 0xffffff00, 0, SROM8_2G_MCSPO + 2, 0xffff},
- {"mcs2gpo3", 0xffffff00, 0, SROM8_2G_MCSPO + 3, 0xffff},
- {"mcs2gpo4", 0xffffff00, 0, SROM8_2G_MCSPO + 4, 0xffff},
- {"mcs2gpo5", 0xffffff00, 0, SROM8_2G_MCSPO + 5, 0xffff},
- {"mcs2gpo6", 0xffffff00, 0, SROM8_2G_MCSPO + 6, 0xffff},
- {"mcs2gpo7", 0xffffff00, 0, SROM8_2G_MCSPO + 7, 0xffff},
- {"mcs5gpo0", 0xffffff00, 0, SROM8_5G_MCSPO, 0xffff},
- {"mcs5gpo1", 0xffffff00, 0, SROM8_5G_MCSPO + 1, 0xffff},
- {"mcs5gpo2", 0xffffff00, 0, SROM8_5G_MCSPO + 2, 0xffff},
- {"mcs5gpo3", 0xffffff00, 0, SROM8_5G_MCSPO + 3, 0xffff},
- {"mcs5gpo4", 0xffffff00, 0, SROM8_5G_MCSPO + 4, 0xffff},
- {"mcs5gpo5", 0xffffff00, 0, SROM8_5G_MCSPO + 5, 0xffff},
- {"mcs5gpo6", 0xffffff00, 0, SROM8_5G_MCSPO + 6, 0xffff},
- {"mcs5gpo7", 0xffffff00, 0, SROM8_5G_MCSPO + 7, 0xffff},
- {"mcs5glpo0", 0xffffff00, 0, SROM8_5GL_MCSPO, 0xffff},
- {"mcs5glpo1", 0xffffff00, 0, SROM8_5GL_MCSPO + 1, 0xffff},
- {"mcs5glpo2", 0xffffff00, 0, SROM8_5GL_MCSPO + 2, 0xffff},
- {"mcs5glpo3", 0xffffff00, 0, SROM8_5GL_MCSPO + 3, 0xffff},
- {"mcs5glpo4", 0xffffff00, 0, SROM8_5GL_MCSPO + 4, 0xffff},
- {"mcs5glpo5", 0xffffff00, 0, SROM8_5GL_MCSPO + 5, 0xffff},
- {"mcs5glpo6", 0xffffff00, 0, SROM8_5GL_MCSPO + 6, 0xffff},
- {"mcs5glpo7", 0xffffff00, 0, SROM8_5GL_MCSPO + 7, 0xffff},
- {"mcs5ghpo0", 0xffffff00, 0, SROM8_5GH_MCSPO, 0xffff},
- {"mcs5ghpo1", 0xffffff00, 0, SROM8_5GH_MCSPO + 1, 0xffff},
- {"mcs5ghpo2", 0xffffff00, 0, SROM8_5GH_MCSPO + 2, 0xffff},
- {"mcs5ghpo3", 0xffffff00, 0, SROM8_5GH_MCSPO + 3, 0xffff},
- {"mcs5ghpo4", 0xffffff00, 0, SROM8_5GH_MCSPO + 4, 0xffff},
- {"mcs5ghpo5", 0xffffff00, 0, SROM8_5GH_MCSPO + 5, 0xffff},
- {"mcs5ghpo6", 0xffffff00, 0, SROM8_5GH_MCSPO + 6, 0xffff},
- {"mcs5ghpo7", 0xffffff00, 0, SROM8_5GH_MCSPO + 7, 0xffff},
- {"cddpo", 0x000000f0, 0, SROM4_CDDPO, 0xffff},
- {"stbcpo", 0x000000f0, 0, SROM4_STBCPO, 0xffff},
- {"bw40po", 0x000000f0, 0, SROM4_BW40PO, 0xffff},
- {"bwduppo", 0x000000f0, 0, SROM4_BWDUPPO, 0xffff},
- {"cddpo", 0xffffff00, 0, SROM8_CDDPO, 0xffff},
- {"stbcpo", 0xffffff00, 0, SROM8_STBCPO, 0xffff},
- {"bw40po", 0xffffff00, 0, SROM8_BW40PO, 0xffff},
- {"bwduppo", 0xffffff00, 0, SROM8_BWDUPPO, 0xffff},
- {"ccode", 0x0000000f, SRFL_CCODE, SROM_CCODE, 0xffff},
- {"ccode", 0x00000010, SRFL_CCODE, SROM4_CCODE, 0xffff},
- {"ccode", 0x000000e0, SRFL_CCODE, SROM5_CCODE, 0xffff},
- {"ccode", 0xffffff00, SRFL_CCODE, SROM8_CCODE, 0xffff},
- {"macaddr", 0xffffff00, SRFL_ETHADDR, SROM8_MACHI, 0xffff},
- {"macaddr", 0x000000e0, SRFL_ETHADDR, SROM5_MACHI, 0xffff},
- {"macaddr", 0x00000010, SRFL_ETHADDR, SROM4_MACHI, 0xffff},
- {"macaddr", 0x00000008, SRFL_ETHADDR, SROM3_MACHI, 0xffff},
- {"il0macaddr", 0x00000007, SRFL_ETHADDR, SROM_MACHI_IL0, 0xffff},
- {"et1macaddr", 0x00000007, SRFL_ETHADDR, SROM_MACHI_ET1, 0xffff},
- {"leddc", 0xffffff00, SRFL_NOFFS | SRFL_LEDDC, SROM8_LEDDC, 0xffff},
- {"leddc", 0x000000e0, SRFL_NOFFS | SRFL_LEDDC, SROM5_LEDDC, 0xffff},
- {"leddc", 0x00000010, SRFL_NOFFS | SRFL_LEDDC, SROM4_LEDDC, 0xffff},
- {"leddc", 0x00000008, SRFL_NOFFS | SRFL_LEDDC, SROM3_LEDDC, 0xffff},
- {NULL, 0, 0, 0, 0}
-};
-
-static const sromvar_t perpath_pci_sromvars[] = {
- {"maxp2ga", 0x000000f0, 0, SROM4_2G_ITT_MAXP, 0xff},
- {"itt2ga", 0x000000f0, 0, SROM4_2G_ITT_MAXP, 0xff00},
- {"itt5ga", 0x000000f0, 0, SROM4_5G_ITT_MAXP, 0xff00},
- {"pa2gw0a", 0x000000f0, SRFL_PRHEX, SROM4_2G_PA, 0xffff},
- {"pa2gw1a", 0x000000f0, SRFL_PRHEX, SROM4_2G_PA + 1, 0xffff},
- {"pa2gw2a", 0x000000f0, SRFL_PRHEX, SROM4_2G_PA + 2, 0xffff},
- {"pa2gw3a", 0x000000f0, SRFL_PRHEX, SROM4_2G_PA + 3, 0xffff},
- {"maxp5ga", 0x000000f0, 0, SROM4_5G_ITT_MAXP, 0xff},
- {"maxp5gha", 0x000000f0, 0, SROM4_5GLH_MAXP, 0xff},
- {"maxp5gla", 0x000000f0, 0, SROM4_5GLH_MAXP, 0xff00},
- {"pa5gw0a", 0x000000f0, SRFL_PRHEX, SROM4_5G_PA, 0xffff},
- {"pa5gw1a", 0x000000f0, SRFL_PRHEX, SROM4_5G_PA + 1, 0xffff},
- {"pa5gw2a", 0x000000f0, SRFL_PRHEX, SROM4_5G_PA + 2, 0xffff},
- {"pa5gw3a", 0x000000f0, SRFL_PRHEX, SROM4_5G_PA + 3, 0xffff},
- {"pa5glw0a", 0x000000f0, SRFL_PRHEX, SROM4_5GL_PA, 0xffff},
- {"pa5glw1a", 0x000000f0, SRFL_PRHEX, SROM4_5GL_PA + 1, 0xffff},
- {"pa5glw2a", 0x000000f0, SRFL_PRHEX, SROM4_5GL_PA + 2, 0xffff},
- {"pa5glw3a", 0x000000f0, SRFL_PRHEX, SROM4_5GL_PA + 3, 0xffff},
- {"pa5ghw0a", 0x000000f0, SRFL_PRHEX, SROM4_5GH_PA, 0xffff},
- {"pa5ghw1a", 0x000000f0, SRFL_PRHEX, SROM4_5GH_PA + 1, 0xffff},
- {"pa5ghw2a", 0x000000f0, SRFL_PRHEX, SROM4_5GH_PA + 2, 0xffff},
- {"pa5ghw3a", 0x000000f0, SRFL_PRHEX, SROM4_5GH_PA + 3, 0xffff},
- {"maxp2ga", 0xffffff00, 0, SROM8_2G_ITT_MAXP, 0xff},
- {"itt2ga", 0xffffff00, 0, SROM8_2G_ITT_MAXP, 0xff00},
- {"itt5ga", 0xffffff00, 0, SROM8_5G_ITT_MAXP, 0xff00},
- {"pa2gw0a", 0xffffff00, SRFL_PRHEX, SROM8_2G_PA, 0xffff},
- {"pa2gw1a", 0xffffff00, SRFL_PRHEX, SROM8_2G_PA + 1, 0xffff},
- {"pa2gw2a", 0xffffff00, SRFL_PRHEX, SROM8_2G_PA + 2, 0xffff},
- {"maxp5ga", 0xffffff00, 0, SROM8_5G_ITT_MAXP, 0xff},
- {"maxp5gha", 0xffffff00, 0, SROM8_5GLH_MAXP, 0xff},
- {"maxp5gla", 0xffffff00, 0, SROM8_5GLH_MAXP, 0xff00},
- {"pa5gw0a", 0xffffff00, SRFL_PRHEX, SROM8_5G_PA, 0xffff},
- {"pa5gw1a", 0xffffff00, SRFL_PRHEX, SROM8_5G_PA + 1, 0xffff},
- {"pa5gw2a", 0xffffff00, SRFL_PRHEX, SROM8_5G_PA + 2, 0xffff},
- {"pa5glw0a", 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA, 0xffff},
- {"pa5glw1a", 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA + 1, 0xffff},
- {"pa5glw2a", 0xffffff00, SRFL_PRHEX, SROM8_5GL_PA + 2, 0xffff},
- {"pa5ghw0a", 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA, 0xffff},
- {"pa5ghw1a", 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA + 1, 0xffff},
- {"pa5ghw2a", 0xffffff00, SRFL_PRHEX, SROM8_5GH_PA + 2, 0xffff},
- {NULL, 0, 0, 0, 0}
-};
-
-/* Parse SROM and create name=value pairs. 'srom' points to
- * the SROM word array. 'off' specifies the offset of the
- * first word 'srom' points to, which should be either 0 or
- * SROM3_SWRG_OFF (full SROM or software region).
- */
-
-static uint
-mask_shift (uint16 mask)
-{
- uint i;
- for (i = 0; i < (sizeof (mask) << 3); i++)
- {
- if (mask & (1 << i))
- return i;
- }
- ASSERT (mask);
- return 0;
-}
-
-static uint
-mask_width (uint16 mask)
-{
- int i;
- for (i = (sizeof (mask) << 3) - 1; i >= 0; i--)
- {
- if (mask & (1 << i))
- return (uint) (i - mask_shift (mask) + 1);
- }
- ASSERT (mask);
- return 0;
-}
-
-#ifdef BCMDBG_ASSERT
-static bool
-mask_valid (uint16 mask)
-{
- uint shift = mask_shift (mask);
- uint width = mask_width (mask);
- return mask == ((~0 << shift) & ~(~0 << (shift + width)));
-}
-#endif
-
-static void
-_initvars_srom_pci (uint8 sromrev, uint16 * srom, uint off, varbuf_t * b)
-{
- uint16 w;
- uint32 val;
- const sromvar_t *srv;
- uint width;
- uint flags;
- uint32 sr = (1 << sromrev);
-
- varbuf_append (b, "sromrev=%d", sromrev);
-
- for (srv = pci_sromvars; srv->name != NULL; srv++)
- {
- const char *name;
-
- if ((srv->revmask & sr) == 0)
- continue;
-
- if (srv->off < off)
- continue;
-
- flags = srv->flags;
- name = srv->name;
-
- if (flags & SRFL_ETHADDR)
- {
- char eabuf[ETHER_ADDR_STR_LEN];
- struct ether_addr ea;
-
- ea.octet[0] = (srom[srv->off - off] >> 8) & 0xff;
- ea.octet[1] = srom[srv->off - off] & 0xff;
- ea.octet[2] = (srom[srv->off + 1 - off] >> 8) & 0xff;
- ea.octet[3] = srom[srv->off + 1 - off] & 0xff;
- ea.octet[4] = (srom[srv->off + 2 - off] >> 8) & 0xff;
- ea.octet[5] = srom[srv->off + 2 - off] & 0xff;
- bcm_ether_ntoa (&ea, eabuf);
-
- varbuf_append (b, "%s=%s", name, eabuf);
- }
- else
- {
- ASSERT (mask_valid (srv->mask));
- ASSERT (mask_width (srv->mask));
-
- w = srom[srv->off - off];
- val = (w & srv->mask) >> mask_shift (srv->mask);
- width = mask_width (srv->mask);
-
- while (srv->flags & SRFL_MORE)
- {
- srv++;
- ASSERT (srv->name);
-
- if (srv->off == 0 || srv->off < off)
- continue;
-
- ASSERT (mask_valid (srv->mask));
- ASSERT (mask_width (srv->mask));
-
- w = srom[srv->off - off];
- val += ((w & srv->mask) >> mask_shift (srv->mask)) << width;
- width += mask_width (srv->mask);
- }
-
- if ((flags & SRFL_NOFFS) && ((int) val == (1 << width) - 1))
- continue;
-
- if (flags & SRFL_CCODE)
- {
- if (val == 0)
- varbuf_append (b, "ccode=");
- else
- varbuf_append (b, "ccode=%c%c", (val >> 8), (val & 0xff));
- }
- /* LED Powersave duty cycle has to be scaled:
- *(oncount >> 24) (offcount >> 8)
- */
- else if (flags & SRFL_LEDDC)
- {
- uint32 w32 = (((val >> 8) & 0xff) << 24) | /* oncount */
- (((val & 0xff)) << 8); /* offcount */
- varbuf_append (b, "leddc=%d", w32);
- }
- else if (flags & SRFL_PRHEX)
- varbuf_append (b, "%s=0x%x", name, val);
- else if ((flags & SRFL_PRSIGN) && (val & (1 << (width - 1))))
- varbuf_append (b, "%s=%d", name, (int) (val | (~0 << width)));
- else
- varbuf_append (b, "%s=%u", name, val);
- }
- }
-
- if (sromrev >= 4)
- {
- /* Do per-path variables */
- uint p, pb, psz;
-
- if (sromrev >= 8)
- {
- pb = SROM8_PATH0;
- psz = SROM8_PATH1 - SROM8_PATH0;
- }
- else
- {
- pb = SROM4_PATH0;
- psz = SROM4_PATH1 - SROM4_PATH0;
- }
-
- for (p = 0; p < MAX_PATH; p++)
- {
- for (srv = perpath_pci_sromvars; srv->name != NULL; srv++)
- {
- if ((srv->revmask & sr) == 0)
- continue;
-
- if (pb + srv->off < off)
- continue;
-
- w = srom[pb + srv->off - off];
- ASSERT (mask_valid (srv->mask));
- val = (w & srv->mask) >> mask_shift (srv->mask);
- width = mask_width (srv->mask);
-
- /* Cheating: no per-path var is more than 1 word */
-
- if ((srv->flags & SRFL_NOFFS)
- && ((int) val == (1 << width) - 1))
- continue;
-
- if (srv->flags & SRFL_PRHEX)
- varbuf_append (b, "%s%d=0x%x", srv->name, p, val);
- else
- varbuf_append (b, "%s%d=%d", srv->name, p, val);
- }
- pb += psz;
- }
- }
-}
-
-static int
-initvars_srom_pci (sb_t * sbh, void *curmap, char **vars, uint * count)
-{
- uint16 *srom;
- uint8 sromrev = 0;
- uint32 sr;
- varbuf_t b;
- char *vp, *base = NULL;
- osl_t *osh = sb_osh (sbh);
- bool flash = FALSE;
- char *value;
- int err;
-
- /*
- * Apply CRC over SROM content regardless SROM is present or not,
- * and use variable <devpath>sromrev's existance in flash to decide
- * if we should return an error when CRC fails or read SROM variables
- * from flash.
- */
- srom = MALLOC (osh, SROM_MAX);
- ASSERT (srom);
- if (!srom)
- return -2;
-
- err =
- sprom_read_pci (osh, (void *) ((int8 *) curmap + PCI_BAR0_SPROM_OFFSET),
- 0, srom, SROM_WORDS, TRUE);
-
- if ((srom[SROM4_SIGN] == SROM4_SIGNATURE) ||
- ((sbh->buscoretype == SB_PCIE) && (sbh->buscorerev >= 6)))
- {
- /* sromrev >= 4, read more */
- err =
- sprom_read_pci (osh,
- (void *) ((int8 *) curmap + PCI_BAR0_SPROM_OFFSET), 0,
- srom, SROM4_WORDS, TRUE);
- sromrev = srom[SROM4_CRCREV] & 0xff;
- }
- else if (err == 0)
- {
- /* srom is good and is rev < 4 */
- /* top word of sprom contains version and crc8 */
- sromrev = srom[SROM_CRCREV] & 0xff;
- /* bcm4401 sroms misprogrammed */
- if (sromrev == 0x10)
- sromrev = 1;
- }
-
- if (err)
- {
-#ifdef WLTEST
- uint32 val;
-
- BS_ERROR (("SROM Crc Error, so see if we could use a default\n"));
- val = OSL_PCI_READ_CONFIG (osh, PCI_SPROM_CONTROL, sizeof (uint32));
- if (val & SPROM_OTPIN_USE)
- {
- BS_ERROR (("srom crc failed with OTP, use default vars....\n"));
- vp = base = mfgsromvars;
- if (sb_chip (sbh) == BCM4311_CHIP_ID)
- {
- const char *devid = "devid=0x4311";
- const size_t devid_strlen = strlen (devid);
- BS_ERROR (("setting the devid to be 4311\n"));
- bcopy (devid, vp, devid_strlen + 1);
- vp += devid_strlen + 1;
- }
- bcopy (defaultsromvars, vp, MFGSROM_DEFVARSLEN);
- vp += MFGSROM_DEFVARSLEN;
- goto varsdone;
- }
- else
- {
-#endif /* WLTEST */
- BS_ERROR (("srom crc failed with SPROM....\n"));
- if (!(value = sb_getdevpathvar (sbh, "sromrev")))
- {
- err = -1;
- goto errout;
- }
- sromrev = (uint8) simple_strtoul (value, NULL, 0);
- flash = TRUE;
-#ifdef WLTEST
- }
-#endif /* WLTEST */
- }
-
- /* Bitmask for the sromrev */
- sr = 1 << sromrev;
-
- /* srom version check
- * Current valid versions: 1, 2, 3, 4, 5, 8
- */
- if ((sr & 0x13e) == 0)
- {
- err = -2;
- goto errout;
- }
-
- ASSERT (vars);
- ASSERT (count);
-
- base = vp = MALLOC (osh, MAXSZ_NVRAM_VARS);
- ASSERT (vp);
- if (!vp)
- {
- err = -2;
- goto errout;
- }
-
- /* read variables from flash */
- if (flash)
- {
- if ((err = initvars_flash (sbh, osh, &vp, MAXSZ_NVRAM_VARS)))
- goto errout;
- goto varsdone;
- }
-
- varbuf_init (&b, base, MAXSZ_NVRAM_VARS);
-
- /* parse SROM into name=value pairs. */
- _initvars_srom_pci (sromrev, srom, 0, &b);
-
- /* final nullbyte terminator */
- ASSERT (b.size >= 1);
- vp = b.buf;
- *vp++ = '\0';
-
- ASSERT ((vp - base) <= MAXSZ_NVRAM_VARS);
-
-varsdone:
- err = initvars_table (osh, base, vp, vars, count);
-
-errout:
-#ifdef WLTEST
- if (base && (base != mfgsromvars))
-#else
- if (base)
-#endif
- MFREE (osh, base, MAXSZ_NVRAM_VARS);
-
- MFREE (osh, srom, SROM_MAX);
- return err;
-}
-
-/*
- * Read the cis and call parsecis to initialize the vars.
- * Return 0 on success, nonzero on error.
- */
-static int
-initvars_cis_pcmcia (sb_t * sbh, osl_t * osh, char **vars, uint * count)
-{
- uint8 *cis = NULL;
- int rc;
- uint data_sz;
-
- data_sz = (sb_pcmciarev (sbh) == 1) ? (SPROM_SIZE * 2) : CIS_SIZE;
-
- if ((cis = MALLOC (osh, data_sz)) == NULL)
- return (-2);
-
- if (sb_pcmciarev (sbh) == 1)
- {
- if (srom_read
- (sbh, PCMCIA_BUS, (void *) NULL, osh, 0, data_sz, (uint16 *) cis))
- {
- MFREE (osh, cis, data_sz);
- return (-1);
- }
- /* fix up endianess for 16-bit data vs 8-bit parsing */
- htol16_buf ((uint16 *) cis, data_sz);
- }
- else
- OSL_PCMCIA_READ_ATTR (osh, 0, cis, data_sz);
-
- rc = srom_parsecis (osh, &cis, 1, vars, count);
-
- MFREE (osh, cis, data_sz);
-
- return (rc);
-}
-
-
-static int
-BCMINITFN (initvars_srom_sb) (sb_t * sbh, osl_t * osh, void *curmap,
- char **vars, uint * varsz)
-{
-#if defined(BCMSDIODEV)
- /* CIS is read and supplied by the host */
- return BCME_OK;
-#elif defined(BCMUSBDEV)
- static bool srvars = FALSE; /* Use OTP/SPROM as global variables */
-
- int sel = 0; /* where to read the srom. 0 - nowhere, 1 - otp, 2 - sprom */
- uint sz = 0; /* srom size in bytes */
- void *oh = NULL;
- int rc = BCME_OK;
-
- /* Bail out if we've dealt with OTP/SPROM before! */
- if (srvars)
- return 0;
-
-#if defined(BCM4328)
- if (sbh->chip == BCM4328_CHIP_ID)
- {
- /* Access the SPROM if it is present */
- if ((sz = srom_size (sbh, osh)) != 0)
- {
- sz <<= 1;
- sel = 2;
- }
- }
-#endif
-#if defined(BCM4325)
- if (sbh->chip == BCM4325_CHIP_ID)
- {
- uint32 cst = sbh->chipst & CST4325_SPROM_OTP_SEL_MASK;
-
- /* Access OTP if it is present, powered on, and programmed */
- if ((oh = otp_init (sbh)) != NULL && (otp_status (oh) & OTPS_GUP_SW))
- {
- sz = otp_size (oh);
- sel = 1;
- }
- /* Access the SPROM if it is present and allow to be accessed */
- else if ((cst == CST4325_OTP_PWRDN || cst == CST4325_SPROM_SEL) &&
- (sz = srom_size (sbh, osh)) != 0)
- {
- sz <<= 1;
- sel = 2;
- }
- }
-#endif /* BCM4325 */
-
- /* Read CIS in OTP/SPROM */
- if (sel != 0)
- {
- uint16 *srom;
- uint8 *body = NULL;
-
- ASSERT (sz);
-
- /* Allocate memory */
- if ((srom = (uint16 *) MALLOC (osh, sz)) == NULL)
- return BCME_NOMEM;
-
- /* Read CIS */
- switch (sel)
- {
- case 1:
- rc = otp_read_region (oh, OTP_SW_RGN, srom, sz);
- body = (uint8 *) srom;
- break;
- case 2:
- rc = srom_read (sbh, SB_BUS, curmap, osh, 0, sz, srom);
- /* sprom has 8 byte h/w header */
- body = (uint8 *) srom + SBSDIO_SPROM_CIS_OFFSET;
- break;
- default:
- /* impossible to come here */
- ASSERT (0);
- break;
- }
-
- /* Parse CIS */
- if (rc == BCME_OK)
- {
- uint i, tpls = 0xffffffff;
- /* # sdiod fns + common + extra */
- uint8 *cis[SBSDIO_NUM_FUNCTION + 2];
- uint ciss = 0;
-
- /* each word is in host endian */
- htol16_buf ((uint8 *) srom, sz);
-
- ASSERT (body);
-
- /* count cis tuple chains */
- for (i = 0; i < sz && ciss < ARRAYSIZE (cis) && tpls != 0; i++)
- {
- cis[ciss++] = &body[i];
- for (tpls = 0; i < sz - 1; tpls++)
- {
- if (body[i++] == CISTPL_END)
- break;
- i += body[i] + 1;
- }
- }
-
- /* call parser routine only when there are tuple chains */
- if (ciss > 1)
- rc = srom_parsecis (osh, cis, ciss, vars, varsz);
- }
-
- /* Clean up */
- MFREE (osh, srom, sz);
-
- /* Make SROM variables global */
- if (rc == BCME_OK)
- {
- rc = nvram_append ((void *) sbh, *vars, *varsz);
- srvars = TRUE;
-
- /* Tell the caller there is no individual SROM variables */
- *vars = NULL;
- *varsz = 0;
- }
- }
-
- return rc;
-#else /* !BCMUSBDEV && !BCMSDIODEV */
- /* Search flash nvram section for srom variables */
- return initvars_flash_sb (sbh, vars, varsz);
-#endif /* !BCMUSBDEV && !BCMSDIODEV */
-}
-
-#ifdef BCMUSBDEV
-/* Return sprom size in 16-bit words */
-static uint
-srom_size (sb_t * sbh, osl_t * osh)
-{
- uint size = 0;
- if (SPROMBUS == PCMCIA_BUS)
- {
- uint32 origidx;
- sdpcmd_regs_t *pcmregs;
- bool wasup;
-
- origidx = sb_coreidx (sbh);
- pcmregs = sb_setcore (sbh, SB_PCMCIA, 0);
- ASSERT (pcmregs);
-
- if (!(wasup = sb_iscoreup (sbh)))
- sb_core_reset (sbh, 0, 0);
-
- /* not worry about earlier core revs */
- if (sb_corerev (sbh) < 8)
- goto done;
-
- /* SPROM is accessible only in PCMCIA mode unless there is SDIO clock */
- if (!(R_REG (osh, &pcmregs->corestatus) & CS_PCMCIAMODE))
- goto done;
-
- switch (SB_PCMCIA_READ (osh, pcmregs, SROM_INFO) & SRI_SZ_MASK)
- {
- case 1:
- size = 256; /* SROM_INFO == 1 means 4kbit */
- break;
- case 2:
- size = 1024; /* SROM_INFO == 2 means 16kbit */
- break;
- default:
- break;
- }
-
- done:
- if (!wasup)
- sb_core_disable (sbh, 0);
-
- sb_setcoreidx (sbh, origidx);
- }
- return size;
-}
-#endif /* def BCMUSBDEV */
+++ /dev/null
-/*
- * NVRAM variable manipulation (Linux kernel half)
- *
- * Copyright 2001-2003, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <typedefs.h>
-#include <osl.h>
-#include <bcmendian.h>
-
-#define NVRAM_SIZE (0x1ff0)
-static char _nvdata[NVRAM_SIZE] __initdata;
-static char _valuestr[256] __initdata;
-
-/*
- * TLV types. These codes are used in the "type-length-value"
- * encoding of the items stored in the NVRAM device (flash or EEPROM)
- *
- * The layout of the flash/nvram is as follows:
- *
- * <type> <length> <data ...> <type> <length> <data ...> <type_end>
- *
- * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
- * The "length" field marks the length of the data section, not
- * including the type and length fields.
- *
- * Environment variables are stored as follows:
- *
- * <type_env> <length> <flags> <name> = <value>
- *
- * If bit 0 (low bit) is set, the length is an 8-bit value.
- * If bit 0 (low bit) is clear, the length is a 16-bit value
- *
- * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
- * indicates the size of the length field.
- *
- * Flags are from the constants below:
- *
- */
-#define ENV_LENGTH_16BITS 0x00 /* for low bit */
-#define ENV_LENGTH_8BITS 0x01
-
-#define ENV_TYPE_USER 0x80
-
-#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-
-/*
- * The actual TLV types we support
- */
-
-#define ENV_TLV_TYPE_END 0x00
-#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-
-/*
- * Environment variable flags
- */
-
-#define ENV_FLG_NORMAL 0x00 /* normal read/write */
-#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
-#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
-
-#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
-#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
-
-
-/* *********************************************************************
- * _nvram_read(buffer,offset,length)
- *
- * Read data from the NVRAM device
- *
- * Input parameters:
- * buffer - destination buffer
- * offset - offset of data to read
- * length - number of bytes to read
- *
- * Return value:
- * number of bytes read, or <0 if error occured
- ********************************************************************* */
-static int
-_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-{
- int i;
- if (offset > NVRAM_SIZE)
- return -1;
-
- for ( i = 0; i < length; i++) {
- buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
- }
- return length;
-}
-
-
-static char*
-_strnchr(const char *dest,int c,size_t cnt)
-{
- while (*dest && (cnt > 0)) {
- if (*dest == c) return (char *) dest;
- dest++;
- cnt--;
- }
- return NULL;
-}
-
-
-
-/*
- * Core support API: Externally visible.
- */
-
-/*
- * Get the value of an NVRAM variable
- * @param name name of variable to get
- * @return value of variable or NULL if undefined
- */
-
-char*
-cfe_env_get(unsigned char *nv_buf, char* name)
-{
- int size;
- unsigned char *buffer;
- unsigned char *ptr;
- unsigned char *envval;
- unsigned int reclen;
- unsigned int rectype;
- int offset;
- int flg;
-
- size = NVRAM_SIZE;
- buffer = &_nvdata[0];
-
- ptr = buffer;
- offset = 0;
-
- /* Read the record type and length */
- if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
- goto error;
- }
-
- while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
-
- /* Adjust pointer for TLV type */
- rectype = *(ptr);
- offset++;
- size--;
-
- /*
- * Read the length. It can be either 1 or 2 bytes
- * depending on the code
- */
- if (rectype & ENV_LENGTH_8BITS) {
- /* Read the record type and length - 8 bits */
- if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
- goto error;
- }
- reclen = *(ptr);
- size--;
- offset++;
- }
- else {
- /* Read the record type and length - 16 bits, MSB first */
- if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
- goto error;
- }
- reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
- size -= 2;
- offset += 2;
- }
-
- if (reclen > size)
- break; /* should not happen, bad NVRAM */
-
- switch (rectype) {
- case ENV_TLV_TYPE_ENV:
- /* Read the TLV data */
- if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
- goto error;
- flg = *ptr++;
- envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
- if (envval) {
- *envval++ = '\0';
- memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
- _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-#if 0
- printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-#endif
- if(!strcmp(ptr, name)){
- return _valuestr;
- }
- if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
- return _valuestr;
- }
- break;
-
- default:
- /* Unknown TLV type, skip it. */
- break;
- }
-
- /*
- * Advance to next TLV
- */
-
- size -= (int)reclen;
- offset += reclen;
-
- /* Read the next record type */
- ptr = buffer;
- if (_nvram_read(nv_buf, ptr,offset,1) != 1)
- goto error;
- }
-
-error:
- return NULL;
-
-}
-
+++ /dev/null
-#include <linux/module.h>
-
-#define _export(n) \
- void n(void); \
- EXPORT_SYMBOL(n);
-
-_export(bcm947xx_sbh)
-
-_export(sb_alp_clock)
-_export(sb_attach)
-_export(sb_kattach)
-_export(sb_backplane64)
-_export(sb_boardtype)
-_export(sb_boardvendor)
-_export(sb_btcgpiowar)
-_export(sb_bus)
-_export(sb_chip)
-_export(sb_chiprev)
-_export(sb_chipcrev)
-_export(sb_chippkg)
-_export(sb_clkctl_clk)
-_export(sb_clkctl_fast_pwrup_delay)
-_export(sb_clkctl_init)
-_export(sb_clkctl_xtal)
-_export(sb_core_disable)
-_export(sb_core_reset)
-_export(sb_core_tofixup)
-_export(sb_coreflags)
-_export(sb_coreflags_wo)
-_export(sb_coreflagshi)
-_export(sb_coreidx)
-_export(sb_coreregs)
-_export(sb_corerev)
-_export(sb_coreunit)
-_export(sb_detach)
-_export(sb_deviceremoved)
-_export(sb_gpiosetcore)
-_export(sb_gpiocontrol)
-_export(sb_gpiointmask)
-_export(sb_gpiointpolarity)
-_export(sb_gpioled)
-_export(sb_gpioin)
-_export(sb_gpioout)
-_export(sb_gpioouten)
-_export(sb_gpiopull)
-_export(sb_gpiotimerval)
-_export(sb_irq)
-_export(sb_iscoreup)
-_export(sb_pci_setup)
-_export(sb_pci_sleep)
-_export(sb_pci_down)
-_export(sb_pci_up)
-_export(sb_pcirev)
-_export(sb_pcmcia_init)
-_export(sb_pcmciarev)
-_export(sb_pmu_paref_ldo_enable)
-_export(sb_pmu_rcal)
-_export(sb_pmu_set_ldo_voltage)
-_export(sb_deregister_intr_callback)
-_export(sb_register_intr_callback)
-_export(sb_setcore)
-_export(sb_setcoreidx)
-_export(sb_war16165)
-_export(sb_war42780_clkreq)
-_export(sb_osh)
-
-_export(getvar)
-_export(getintvar)
-
-_export(nvram_get)
-_export(nvram_getall)
-
-_export(srom_read)
-_export(srom_write)
-
+++ /dev/null
-#
-# Makefile for the BCM947xx specific kernel interface routines
-# under Linux.
-#
-EXTRA_CFLAGS += -fno-delayed-branch
-USE_STANDARD_AS_RULE := true
-
-O_TARGET := brcm.o
-
-obj-y := int-handler.o irq.o
-
-include $(TOPDIR)/Rules.make
+++ /dev/null
-/*
- * Generic interrupt handler for Broadcom MIPS boards
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <linux/config.h>
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * MIPS IRQ Source
- * -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Combined hardware interrupt (hw0)
- * 3 Hardware
- * 4 Hardware
- * 5 Hardware
- * 6 Hardware
- * 7 R4k timer
- */
-
- .text
- .set noreorder
- .set noat
- .align 5
- NESTED(brcmIRQ, PT_SIZE, sp)
- SAVE_ALL
- CLI
- .set at
- .set noreorder
-
- jal brcm_irq_dispatch
- move a0, sp
-
- j ret_from_irq
- nop
-
- END(brcmIRQ)
+++ /dev/null
-/*
- * Generic interrupt control functions for Broadcom MIPS boards
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/gdb-stub.h>
-
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-
-extern asmlinkage void brcmIRQ(void);
-extern asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs);
-
-void
-brcm_irq_dispatch(struct pt_regs *regs)
-{
- u32 cause;
-
- cause = read_c0_cause() &
- read_c0_status() &
- CAUSEF_IP;
-
-#ifdef CONFIG_KERNPROF
- change_c0_status(cause | 1, 1);
-#else
- clear_c0_status(cause);
-#endif
-
- if (cause & CAUSEF_IP7)
- do_IRQ(7, regs);
- if (cause & CAUSEF_IP2)
- do_IRQ(2, regs);
- if (cause & CAUSEF_IP3)
- do_IRQ(3, regs);
- if (cause & CAUSEF_IP4)
- do_IRQ(4, regs);
- if (cause & CAUSEF_IP5)
- do_IRQ(5, regs);
- if (cause & CAUSEF_IP6)
- do_IRQ(6, regs);
-}
-
-static void
-enable_brcm_irq(unsigned int irq)
-{
- if (irq < 8)
- set_c0_status(1 << (irq + 8));
- else
- set_c0_status(IE_IRQ0);
-}
-
-static void
-disable_brcm_irq(unsigned int irq)
-{
- if (irq < 8)
- clear_c0_status(1 << (irq + 8));
- else
- clear_c0_status(IE_IRQ0);
-}
-
-static void
-ack_brcm_irq(unsigned int irq)
-{
- /* Already done in brcm_irq_dispatch */
-}
-
-static unsigned int
-startup_brcm_irq(unsigned int irq)
-{
- enable_brcm_irq(irq);
-
- return 0; /* never anything pending */
-}
-
-static void
-end_brcm_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_brcm_irq(irq);
-}
-
-static struct hw_interrupt_type brcm_irq_type = {
- typename: "MIPS",
- startup: startup_brcm_irq,
- shutdown: disable_brcm_irq,
- enable: enable_brcm_irq,
- disable: disable_brcm_irq,
- ack: ack_brcm_irq,
- end: end_brcm_irq,
- NULL
-};
-
-void __init
-init_IRQ(void)
-{
- int i;
-
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = 0;
- irq_desc[i].depth = 1;
- irq_desc[i].handler = &brcm_irq_type;
- }
-
- set_except_vector(0, brcmIRQ);
- change_c0_status(ST0_IM, ALLINTS);
-
-#ifdef CONFIG_REMOTE_DEBUG
- printk("Breaking into debugger...\n");
- set_debug_traps();
- breakpoint();
-#endif
-}
+++ /dev/null
-/*
- * GPIO char driver
- *
- * Copyright 2005, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <asm/uaccess.h>
-
-#include <typedefs.h>
-#include <osl.h>
-#include <sbutils.h>
-#include <bcmdevs.h>
-
-static sb_t *gpio_sbh;
-static int gpio_major;
-static devfs_handle_t gpio_dir;
-static struct {
- char *name;
- devfs_handle_t handle;
-} gpio_file[] = {
- { "in", NULL },
- { "out", NULL },
- { "outen", NULL },
- { "control", NULL }
-};
-
-static int
-gpio_open(struct inode *inode, struct file * file)
-{
- if (MINOR(inode->i_rdev) > ARRAYSIZE(gpio_file))
- return -ENODEV;
-
- MOD_INC_USE_COUNT;
- return 0;
-}
-
-static int
-gpio_release(struct inode *inode, struct file * file)
-{
- MOD_DEC_USE_COUNT;
- return 0;
-}
-
-static ssize_t
-gpio_read(struct file *file, char *buf, size_t count, loff_t *ppos)
-{
- u32 val;
-
- switch (MINOR(file->f_dentry->d_inode->i_rdev)) {
- case 0:
- val = sb_gpioin(gpio_sbh);
- break;
- case 1:
- val = sb_gpioout(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
- break;
- case 2:
- val = sb_gpioouten(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
- break;
- case 3:
- val = sb_gpiocontrol(gpio_sbh, 0, 0, GPIO_DRV_PRIORITY);
- break;
- default:
- return -ENODEV;
- }
-
- if (put_user(val, (u32 *) buf))
- return -EFAULT;
-
- return sizeof(val);
-}
-
-static ssize_t
-gpio_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
-{
- u32 val;
-
- if (get_user(val, (u32 *) buf))
- return -EFAULT;
-
- switch (MINOR(file->f_dentry->d_inode->i_rdev)) {
- case 0:
- return -EACCES;
- case 1:
- sb_gpioout(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
- break;
- case 2:
- sb_gpioouten(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
- break;
- case 3:
- sb_gpiocontrol(gpio_sbh, ~0, val, GPIO_DRV_PRIORITY);
- break;
- default:
- return -ENODEV;
- }
-
- return sizeof(val);
-}
-
-static struct file_operations gpio_fops = {
- owner: THIS_MODULE,
- open: gpio_open,
- release: gpio_release,
- read: gpio_read,
- write: gpio_write,
-};
-
-static int __init
-gpio_init(void)
-{
- int i;
-
- if (!(gpio_sbh = sb_kattach(SB_OSH)))
- return -ENODEV;
-
- sb_gpiosetcore(gpio_sbh);
-
- if ((gpio_major = devfs_register_chrdev(0, "gpio", &gpio_fops)) < 0)
- return gpio_major;
-
- gpio_dir = devfs_mk_dir(NULL, "gpio", NULL);
-
- for (i = 0; i < ARRAYSIZE(gpio_file); i++) {
- gpio_file[i].handle = devfs_register(gpio_dir,
- gpio_file[i].name,
- DEVFS_FL_DEFAULT, gpio_major, i,
- S_IFCHR | S_IRUGO | S_IWUGO,
- &gpio_fops, NULL);
- }
-
- return 0;
-}
-
-static void __exit
-gpio_exit(void)
-{
- int i;
-
- for (i = 0; i < ARRAYSIZE(gpio_file); i++)
- devfs_unregister(gpio_file[i].handle);
- devfs_unregister(gpio_dir);
- devfs_unregister_chrdev(gpio_major, "gpio");
- sb_detach(gpio_sbh);
-}
-
-module_init(gpio_init);
-module_exit(gpio_exit);
+++ /dev/null
-/*
- * BCM47XX support code for some chipcommon facilities (uart, jtagm)
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <typedefs.h>
-#include <bcmdefs.h>
-#include <osl.h>
-#include <sbutils.h>
-#include <bcmdevs.h>
-#include <bcmnvram.h>
-#include <sbconfig.h>
-#include <sbchipc.h>
-#include <sbextif.h>
-#include <hndchipc.h>
-#include <hndcpu.h>
-
-/* debug/trace */
-#define CC_ERROR(args)
-
-#ifdef BCMDBG
-#define CC_MSG(args) printf args
-#else
-#define CC_MSG(args)
-#endif /* BCMDBG */
-
-/* interested chipcommon interrupt source
- * - GPIO
- * - EXTIF
- * - ECI
- * - PMU
- * - UART
- */
-#define MAX_CC_INT_SOURCE 5
-
-/* chipc secondary isr info */
-typedef struct {
- uint intmask; /* int mask */
- cc_isr_fn isr; /* secondary isr handler */
- void *cbdata; /* pointer to private data */
-} cc_isr_info_t;
-
-static cc_isr_info_t cc_isr_desc[MAX_CC_INT_SOURCE];
-
-/* chip common intmask */
-static uint32 cc_intmask = 0;
-
-static bool BCMINITFN(serial_exists) (osl_t * osh, uint8 * regs) {
- uint8 save_mcr, status1;
-
- save_mcr = R_REG(osh, ®s[UART_MCR]);
- W_REG(osh, ®s[UART_MCR], UART_MCR_LOOP | 0x0a);
- status1 = R_REG(osh, ®s[UART_MSR]) & 0xf0;
- W_REG(osh, ®s[UART_MCR], save_mcr);
-
- return (status1 == 0x90);
-}
-
-static void __init sb_extif_serial_init(sb_t * sbh, void *regs,
- sb_serial_init_fn add)
-{
- osl_t *osh = sb_osh(sbh);
- extifregs_t *eir = (extifregs_t *) regs;
- sbconfig_t *sb;
- ulong base;
- uint irq;
- int i, n;
-
- /* Determine external UART register base */
- sb = (sbconfig_t *) ((ulong) eir + SBCONFIGOFF);
- base = EXTIF_CFGIF_BASE(sb_base(R_REG(osh, &sb->sbadmatch1)));
-
- /* Determine IRQ */
- irq = sb_irq(sbh);
-
- /* Disable GPIO interrupt initially */
- W_REG(osh, &eir->gpiointpolarity, 0);
- W_REG(osh, &eir->gpiointmask, 0);
-
- /* Search for external UARTs */
- n = 2;
- for (i = 0; i < 2; i++) {
- regs = (void *)REG_MAP(base + (i * 8), 8);
- if (serial_exists(osh, regs)) {
- /* Set GPIO 1 to be the external UART IRQ */
- W_REG(osh, &eir->gpiointmask, 2);
- /* XXXDetermine external UART clock */
- if (add)
- add(regs, irq, 13500000, 0);
- }
- }
-
- /* Add internal UART if enabled */
- if (R_REG(osh, &eir->corecontrol) & CC_UE)
- if (add)
- add((void *)&eir->uartdata, irq, sb_clock(sbh), 2);
-}
-
-/*
- * Initializes UART access. The callback function will be called once
- * per found UART.
- */
-void BCMINITFN(sb_serial_init) (sb_t * sbh, sb_serial_init_fn add) {
- osl_t *osh;
- void *regs;
- chipcregs_t *cc;
- uint32 rev, cap, pll, baud_base, div;
- uint irq;
- int i, n;
-
- osh = sb_osh(sbh);
-
- regs = sb_setcore(sbh, SB_EXTIF, 0);
- if (regs) {
- sb_extif_serial_init(sbh, regs, add);
- return;
- }
-
- cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0);
- ASSERT(cc);
-
- /* Determine core revision and capabilities */
- rev = sbh->ccrev;
- cap = sbh->cccaps;
- pll = cap & CC_CAP_PLL_MASK;
-
- /* Determine IRQ */
- irq = sb_irq(sbh);
-
- if (pll == PLL_TYPE1) {
- /* PLL clock */
- baud_base = sb_clock_rate(pll,
- R_REG(osh, &cc->clockcontrol_n),
- R_REG(osh, &cc->clockcontrol_m2));
- div = 1;
- } else {
- /* 5354 chip common uart uses a constant clock
- * frequency of 25MHz */
- if (sb_corerev(sbh) == 20) {
- /* Set the override bit so we don't divide it */
- W_REG(osh, &cc->corecontrol, CC_UARTCLKO);
- baud_base = 25000000;
- } else if (rev >= 11 && rev != 15) {
- /* Fixed ALP clock */
- baud_base = sb_alp_clock(sbh);
- div = 1;
- /* Turn off UART clock before switching clock source */
- if (rev >= 21)
- AND_REG(osh, &cc->corecontrol, ~CC_UARTCLKEN);
- /* Set the override bit so we don't divide it */
- OR_REG(osh, &cc->corecontrol, CC_UARTCLKO);
- if (rev >= 21)
- OR_REG(osh, &cc->corecontrol, CC_UARTCLKEN);
- } else if (rev >= 3) {
- /* Internal backplane clock */
- baud_base = sb_clock(sbh);
- div = 2; /* Minimum divisor */
- W_REG(osh, &cc->clkdiv,
- ((R_REG(osh, &cc->clkdiv) & ~CLKD_UART) | div));
- } else {
- /* Fixed internal backplane clock */
- baud_base = 88000000;
- div = 48;
- }
-
- /* Clock source depends on strapping if UartClkOverride is unset */
- if ((rev > 0)
- && ((R_REG(osh, &cc->corecontrol) & CC_UARTCLKO) == 0)) {
- if ((cap & CC_CAP_UCLKSEL) == CC_CAP_UINTCLK) {
- /* Internal divided backplane clock */
- baud_base /= div;
- } else {
- /* Assume external clock of 1.8432 MHz */
- baud_base = 1843200;
- }
- }
- }
-
- /* Add internal UARTs */
- n = cap & CC_CAP_UARTS_MASK;
- for (i = 0; i < n; i++) {
- /* Register offset changed after revision 0 */
- if (rev)
- regs = (void *)((ulong) & cc->uart0data + (i * 256));
- else
- regs = (void *)((ulong) & cc->uart0data + (i * 8));
-
- if (add)
- add(regs, irq, baud_base, 0);
- }
-}
-
-#if 0
-/*
- * Initialize jtag master and return handle for
- * jtag_rwreg. Returns NULL on failure.
- */
-void *sb_jtagm_init(sb_t * sbh, uint clkd, bool exttap)
-{
- void *regs;
-
- if ((regs = sb_setcore(sbh, SB_CC, 0)) != NULL) {
- chipcregs_t *cc = (chipcregs_t *) regs;
- uint32 tmp;
-
- /*
- * Determine jtagm availability from
- * core revision and capabilities.
- */
-
- /*
- * Corerev 10 has jtagm, but the only chip
- * with it does not have a mips, and
- * the layout of the jtagcmd register is
- * different. We'll only accept >= 11.
- */
- if (sbh->ccrev < 11)
- return (NULL);
-
- if ((sbh->cccaps & CC_CAP_JTAGP) == 0)
- return (NULL);
-
- /* Set clock divider if requested */
- if (clkd != 0) {
- tmp = R_REG(osh, &cc->clkdiv);
- tmp =
- (tmp & ~CLKD_JTAG) | ((clkd << CLKD_JTAG_SHIFT) &
- CLKD_JTAG);
- W_REG(osh, &cc->clkdiv, tmp);
- }
-
- /* Enable jtagm */
- tmp = JCTRL_EN | (exttap ? JCTRL_EXT_EN : 0);
- W_REG(osh, &cc->jtagctrl, tmp);
- }
-
- return (regs);
-}
-
-void sb_jtagm_disable(osl_t * osh, void *h)
-{
- chipcregs_t *cc = (chipcregs_t *) h;
-
- W_REG(osh, &cc->jtagctrl, R_REG(osh, &cc->jtagctrl) & ~JCTRL_EN);
-}
-
-/*
- * Read/write a jtag register. Assumes a target with
- * 8 bit IR and 32 bit DR.
- */
-#define IRWIDTH 8 /* Default Instruction Register width */
-#define DRWIDTH 32 /* Default Data Register width */
-
-uint32 jtag_rwreg(osl_t * osh, void *h, uint32 ir, uint32 dr)
-{
- chipcregs_t *cc = (chipcregs_t *) h;
- uint32 tmp;
-
- W_REG(osh, &cc->jtagir, ir);
- W_REG(osh, &cc->jtagdr, dr);
- tmp = JCMD_START | JCMD_ACC_IRDR |
- ((IRWIDTH - 1) << JCMD_IRW_SHIFT) | (DRWIDTH - 1);
- W_REG(osh, &cc->jtagcmd, tmp);
- while (((tmp = R_REG(osh, &cc->jtagcmd)) & JCMD_BUSY) == JCMD_BUSY) {
- /* OSL_DELAY(1); */
- }
-
- tmp = R_REG(osh, &cc->jtagdr);
- return (tmp);
-}
-#endif
-
-/*
- * Interface to register chipc secondary isr
- */
-bool
-BCMINITFN(sb_cc_register_isr) (sb_t * sbh, cc_isr_fn isr, uint32 ccintmask,
- void *cbdata) {
- bool done = FALSE;
- chipcregs_t *regs;
- uint origidx;
- uint i;
-
- /* Save the current core index */
- origidx = sb_coreidx(sbh);
- regs = sb_setcore(sbh, SB_CC, 0);
- ASSERT(regs);
-
- for (i = 0; i < MAX_CC_INT_SOURCE; i++) {
- if (cc_isr_desc[i].isr == NULL) {
- cc_isr_desc[i].isr = isr;
- cc_isr_desc[i].cbdata = cbdata;
- cc_isr_desc[i].intmask = ccintmask;
- done = TRUE;
- break;
- }
- }
-
- if (done) {
- cc_intmask = R_REG(sb_osh(sbh), ®s->intmask);
- cc_intmask |= ccintmask;
- W_REG(sb_osh(sbh), ®s->intmask, cc_intmask);
- }
-
- /* restore original coreidx */
- sb_setcoreidx(sbh, origidx);
- return done;
-}
-
-/*
- * chipc primary interrupt handler
- */
-void sb_cc_isr(sb_t * sbh, chipcregs_t * regs)
-{
- uint32 ccintstatus;
- uint32 intstatus;
- uint32 i;
-
- /* prior to rev 21 chipc interrupt means uart and gpio */
- if (sbh->ccrev >= 21)
- ccintstatus = R_REG(sb_osh(sbh), ®s->intstatus) & cc_intmask;
- else
- ccintstatus = (CI_UART | CI_GPIO);
-
- for (i = 0; i < MAX_CC_INT_SOURCE; i++) {
- if ((cc_isr_desc[i].isr != NULL) &&
- (intstatus = (cc_isr_desc[i].intmask & ccintstatus))) {
- (cc_isr_desc[i].isr) (cc_isr_desc[i].cbdata, intstatus);
- }
- }
-}
+++ /dev/null
-/*
- * Misc utility routines for accessing PMU corerev specific features
- * of the SiliconBackplane-based Broadcom chips.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#include <typedefs.h>
-#include <bcmdefs.h>
-#include <osl.h>
-#include <sbutils.h>
-#include <bcmdevs.h>
-#include <sbconfig.h>
-#include <sbchipc.h>
-#include <hndpmu.h>
-
-/* debug/trace */
-#define PMU_ERROR(args)
-
-#ifdef BCMDBG
-#define PMU_MSG(args) printf args
-#else
-#define PMU_MSG(args)
-#endif /* BCMDBG */
-
-/* PMU & control */
-/* PMU rev 0 pll control for BCM4328 and BCM5354 */
-static void sb_pmu0_pllinit0 (sb_t * sbh, osl_t * osh, chipcregs_t * cc,
- uint32 xtal);
-static uint32 sb_pmu0_alpclk0 (sb_t * sbh, osl_t * osh, chipcregs_t * cc);
-static uint32 sb_pmu0_cpuclk0 (sb_t * sbh, osl_t * osh, chipcregs_t * cc);
-/* PMU rev 0 pll control for BCM4325 BCM4329 */
-static void sb_pmu1_pllinit0 (sb_t * sbh, osl_t * osh, chipcregs_t * cc,
- uint32 xtal);
-static uint32 sb_pmu1_cpuclk0 (sb_t * sbh, osl_t * osh, chipcregs_t * cc);
-static uint32 sb_pmu1_alpclk0 (sb_t * sbh, osl_t * osh, chipcregs_t * cc);
-
-/* Setup switcher voltage */
-void
-BCMINITFN (sb_pmu_set_switcher_voltage) (sb_t * sbh, osl_t * osh,
- uint8 bb_voltage, uint8 rf_voltage)
-{
- chipcregs_t *cc;
- uint origidx;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = sb_coreidx (sbh);
- cc = sb_setcore (sbh, SB_CC, 0);
- ASSERT (cc);
-
- W_REG (osh, &cc->regcontrol_addr, 0x01);
- W_REG (osh, &cc->regcontrol_data, (uint32) (bb_voltage & 0x1f) << 22);
-
- W_REG (osh, &cc->regcontrol_addr, 0x00);
- W_REG (osh, &cc->regcontrol_data, (uint32) (rf_voltage & 0x1f) << 14);
-
- /* Return to original core */
- sb_setcoreidx (sbh, origidx);
-}
-
-void
-sb_pmu_set_ldo_voltage (sb_t * sbh, osl_t * osh, uint8 ldo, uint8 voltage)
-{
- uint8 sr_cntl_shift, rc_shift, shift, mask;
- uint32 addr;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- switch (sbh->chip)
- {
- case BCM4328_CHIP_ID:
- case BCM5354_CHIP_ID:
- switch (ldo)
- {
- case SET_LDO_VOLTAGE_LDO1:
- addr = 2;
- sr_cntl_shift = 8;
- rc_shift = 17;
- mask = 0xf;
- break;
- case SET_LDO_VOLTAGE_LDO2:
- addr = 3;
- sr_cntl_shift = 0;
- rc_shift = 1;
- mask = 0xf;
- break;
- case SET_LDO_VOLTAGE_LDO3:
- addr = 3;
- sr_cntl_shift = 0;
- rc_shift = 9;
- mask = 0xf;
- break;
- case SET_LDO_VOLTAGE_PAREF:
- addr = 3;
- sr_cntl_shift = 0;
- rc_shift = 17;
- mask = 0x3f;
- break;
- default:
- ASSERT (FALSE);
- return;
- }
- break;
- case BCM4312_CHIP_ID:
- switch (ldo)
- {
- case SET_LDO_VOLTAGE_PAREF:
- addr = 0;
- sr_cntl_shift = 0;
- rc_shift = 21;
- mask = 0x3f;
- break;
- default:
- ASSERT (FALSE);
- return;
- }
- break;
- default:
- ASSERT (FALSE);
- return;
- }
-
- shift = sr_cntl_shift + rc_shift;
-
- sb_corereg (sbh, SB_CC_IDX, OFFSETOF (chipcregs_t, regcontrol_addr),
- ~0, addr);
- sb_corereg (sbh, SB_CC_IDX, OFFSETOF (chipcregs_t, regcontrol_data),
- mask << shift, (voltage & mask) << shift);
-}
-
-void
-sb_pmu_paref_ldo_enable (sb_t * sbh, osl_t * osh, bool enable)
-{
- uint ldo = 0;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- switch (sbh->chip)
- {
- case BCM4328_CHIP_ID:
- ldo = RES4328_PA_REF_LDO;
- break;
- case BCM5354_CHIP_ID:
- ldo = RES5354_PA_REF_LDO;
- break;
- case BCM4312_CHIP_ID:
- ldo = RES4312_PA_REF_LDO;
- break;
- default:
- return;
- }
-
- sb_corereg (sbh, SB_CC_IDX, OFFSETOF (chipcregs_t, min_res_mask),
- PMURES_BIT (ldo), enable ? PMURES_BIT (ldo) : 0);
-}
-
-uint16 BCMINITFN (sb_pmu_fast_pwrup_delay) (sb_t * sbh, osl_t * osh)
-{
- uint16 delay = PMU_MAX_TRANSITION_DLY;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- switch (sbh->chip)
- {
- case BCM4328_CHIP_ID:
- delay = 7000;
- break;
-
- case BCM4325_CHIP_ID:
- case BCM4312_CHIP_ID:
-#ifdef BCMQT
- delay = 70;
-#else
- delay = 2800;
-#endif
- break;
-
- default:
- PMU_MSG (("No PMU fast power up delay specified "
- "for chip %x rev %d, using default %d us\n",
- sbh->chip, sbh->chiprev, delay));
- break;
- }
-
- return delay;
-}
-
-uint32 BCMINITFN (sb_pmu_force_ilp) (sb_t * sbh, osl_t * osh, bool force)
-{
- chipcregs_t *cc;
- uint origidx;
- uint32 oldpmucontrol;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = sb_coreidx (sbh);
- cc = sb_setcore (sbh, SB_CC, 0);
- ASSERT (cc);
-
- oldpmucontrol = R_REG (osh, &cc->pmucontrol);
- if (force)
- W_REG (osh, &cc->pmucontrol, oldpmucontrol &
- ~(PCTL_HT_REQ_EN | PCTL_ALP_REQ_EN));
- else
- W_REG (osh, &cc->pmucontrol, oldpmucontrol |
- (PCTL_HT_REQ_EN | PCTL_ALP_REQ_EN));
-
- /* Return to original core */
- sb_setcoreidx (sbh, origidx);
-
- return oldpmucontrol;
-}
-
-/* Setup min/max resources and up/down timers */
-typedef struct
-{
- uint8 resnum;
- uint16 updown;
-} pmu_res_updown_t;
-
-typedef struct
-{
- uint8 resnum;
- int8 action; /* 0 - set, 1 - add, -1 - remove */
- uint32 depend_mask;
-} pmu_res_depend_t;
-
-static const pmu_res_updown_t
-BCMINITDATA (bcm4328a0_res_updown)[] =
-{
- {
- RES4328_EXT_SWITCHER_PWM, 0x0101},
- {
- RES4328_BB_SWITCHER_PWM, 0x1f01},
- {
- RES4328_BB_SWITCHER_BURST, 0x010f},
- {
- RES4328_BB_EXT_SWITCHER_BURST, 0x0101},
- {
- RES4328_ILP_REQUEST, 0x0202},
- {
- RES4328_RADIO_SWITCHER_PWM, 0x0f01},
- {
- RES4328_RADIO_SWITCHER_BURST, 0x0f01},
- {
- RES4328_ROM_SWITCH, 0x0101},
- {
- RES4328_PA_REF_LDO, 0x0f01},
- {
- RES4328_RADIO_LDO, 0x0f01},
- {
- RES4328_AFE_LDO, 0x0f01},
- {
- RES4328_PLL_LDO, 0x0f01},
- {
- RES4328_BG_FILTBYP, 0x0101},
- {
- RES4328_TX_FILTBYP, 0x0101},
- {
- RES4328_RX_FILTBYP, 0x0101},
- {
- RES4328_XTAL_PU, 0x0101},
- {
- RES4328_XTAL_EN, 0xa001},
- {
- RES4328_BB_PLL_FILTBYP, 0x0101},
- {
- RES4328_RF_PLL_FILTBYP, 0x0101},
- {
- RES4328_BB_PLL_PU, 0x0701}
-};
-
-static const pmu_res_depend_t
-BCMINITDATA (bcm4328a0_res_depend)[] =
-{
- /* Adjust ILP request resource not to force ext/BB switchers into burst mode */
- {
- RES4328_ILP_REQUEST, 0,
- PMURES_BIT (RES4328_EXT_SWITCHER_PWM) |
- PMURES_BIT (RES4328_BB_SWITCHER_PWM)}
-};
-
-#ifdef BCMQT /* for power save on slow QT/small beacon interval */
-static const pmu_res_updown_t
-BCMINITDATA (bcm4325a0_res_updown_qt)[] =
-{
- {
- RES4325_HT_AVAIL, 0x0300},
- {
- RES4325_BBPLL_PWRSW_PU, 0x0101},
- {
- RES4325_RFPLL_PWRSW_PU, 0x0101},
- {
- RES4325_ALP_AVAIL, 0x0100},
- {
- RES4325_XTAL_PU, 0x1000},
- {
- RES4325_LNLDO1_PU, 0x0800},
- {
- RES4325_CLDO_CBUCK_PWM, 0x0101},
- {
- RES4325_CBUCK_PWM, 0x0803}
-};
-#else
-static const pmu_res_updown_t
-BCMINITDATA (bcm4325a0_res_updown)[] =
-{
- {
- RES4325_XTAL_PU, 0x1501}
-};
-#endif /* !BCMQT */
-
-static const pmu_res_depend_t
-BCMINITDATA (bcm4325a0_res_depend)[] =
-{
- /* Adjust HT Avail resource dependencies */
- {
- RES4325_HT_AVAIL, 1,
- PMURES_BIT (RES4325_RX_PWRSW_PU) | PMURES_BIT (RES4325_TX_PWRSW_PU) |
- PMURES_BIT (RES4325_LOGEN_PWRSW_PU) | PMURES_BIT (RES4325_AFE_PWRSW_PU)}
-};
-
-void BCMINITFN (sb_pmu_res_init) (sb_t * sbh, osl_t * osh)
-{
- chipcregs_t *cc;
- uint origidx;
- const pmu_res_updown_t *pmu_res_updown_table = NULL;
- int pmu_res_updown_table_sz = 0;
- const pmu_res_depend_t *pmu_res_depend_table = NULL;
- int pmu_res_depend_table_sz = 0;
- uint32 min_mask = 0, max_mask = 0;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = sb_coreidx (sbh);
- cc = sb_setcore (sbh, SB_CC, 0);
- ASSERT (cc);
-
- switch (sbh->chip)
- {
- case BCM4328_CHIP_ID:
- /* Down to ILP request excluding ROM */
- min_mask = PMURES_BIT (RES4328_EXT_SWITCHER_PWM) |
- PMURES_BIT (RES4328_BB_SWITCHER_PWM) | PMURES_BIT (RES4328_XTAL_EN);
-#ifdef BCMROMOFFLOAD
- /* Including ROM */
- min_mask |= PMURES_BIT (RES4328_ROM_SWITCH);
-#endif
- /* Allow (but don't require) PLL to turn on */
- max_mask = 0xfffff;
- pmu_res_updown_table = bcm4328a0_res_updown;
- pmu_res_updown_table_sz = ARRAYSIZE (bcm4328a0_res_updown);
- pmu_res_depend_table = bcm4328a0_res_depend;
- pmu_res_depend_table_sz = ARRAYSIZE (bcm4328a0_res_depend);
- break;
- case BCM4312_CHIP_ID:
- /* keep default
- * min_mask = 0xcbb; max_mask = 0x7ffff;
- * pmu_res_updown_table_sz = 0;
- * pmu_res_depend_table_sz = 0;
- */
- break;
- case BCM5354_CHIP_ID:
- /* Allow (but don't require) PLL to turn on */
- max_mask = 0xfffff;
- break;
-
- case BCM4325_CHIP_ID:
- /* Leave OTP powered up and power it down later. */
- min_mask =
- PMURES_BIT (RES4325_CBUCK_BURST) | PMURES_BIT (RES4325_LNLDO2_PU);
- if (((sbh->chipst & CST4325_PMUTOP_2B_MASK) >>
- CST4325_PMUTOP_2B_SHIFT) == 1)
- min_mask |= PMURES_BIT (RES4325_CLDO_CBUCK_BURST);
- /* Allow (but don't require) PLL to turn on */
- max_mask = 0x3fffff;
-#ifdef BCMQT
- pmu_res_updown_table = bcm4325a0_res_updown_qt;
- pmu_res_updown_table_sz = ARRAYSIZE (bcm4325a0_res_updown_qt);
-#else
- pmu_res_updown_table = bcm4325a0_res_updown;
- pmu_res_updown_table_sz = ARRAYSIZE (bcm4325a0_res_updown);
- pmu_res_depend_table = bcm4325a0_res_depend;
- pmu_res_depend_table_sz = ARRAYSIZE (bcm4325a0_res_depend);
-#endif
- break;
-
- default:
- break;
- }
-
- /* Program up/down timers */
- while (pmu_res_updown_table_sz--)
- {
- ASSERT (pmu_res_updown_table);
- W_REG (osh, &cc->res_table_sel,
- pmu_res_updown_table[pmu_res_updown_table_sz].resnum);
- W_REG (osh, &cc->res_updn_timer,
- pmu_res_updown_table[pmu_res_updown_table_sz].updown);
- }
-
- /* Program resource dependencies table */
- while (pmu_res_depend_table_sz--)
- {
- ASSERT (pmu_res_depend_table);
- W_REG (osh, &cc->res_table_sel,
- pmu_res_depend_table[pmu_res_depend_table_sz].resnum);
- switch (pmu_res_depend_table[pmu_res_depend_table_sz].action)
- {
- case 0:
- W_REG (osh, &cc->res_dep_mask,
- pmu_res_depend_table[pmu_res_depend_table_sz].depend_mask);
- break;
- case 1:
- OR_REG (osh, &cc->res_dep_mask,
- pmu_res_depend_table[pmu_res_depend_table_sz].depend_mask);
- break;
- case -1:
- AND_REG (osh, &cc->res_dep_mask,
- ~pmu_res_depend_table[pmu_res_depend_table_sz].
- depend_mask);
- break;
- default:
- ASSERT (0);
- break;
- }
- }
-
- /* program min resource mask */
- if (min_mask)
- {
- PMU_MSG (("Changing min_res_mask to 0x%x\n", min_mask));
- W_REG (osh, &cc->min_res_mask, min_mask);
- }
- /* program max resource mask */
- if (max_mask)
- {
- PMU_MSG (("Changing max_res_mask to 0x%x\n", max_mask));
- W_REG (osh, &cc->max_res_mask, max_mask);
- }
-
- /* Return to original core */
- sb_setcoreidx (sbh, origidx);
-}
-
-/* setup pll and query clock speed */
-typedef struct
-{
- uint16 freq;
- uint8 xf;
- uint8 wbint;
- uint32 wbfrac;
-} pmu0_xtaltab0_t;
-
-/* the following table is based on 880Mhz Fvco */
-#define PMU0_PLL0_FVCO 880000 /* Fvco 880Mhz */
-static const pmu0_xtaltab0_t
-BCMINITDATA (pmu0_xtaltab0)[] =
-{
- {
- 12000, 1, 73, 349525},
- {
- 13000, 2, 67, 725937},
- {
- 14400, 3, 61, 116508},
- {
- 15360, 4, 57, 305834},
- {
- 16200, 5, 54, 336579},
- {
- 16800, 6, 52, 399457},
- {
- 19200, 7, 45, 873813},
- {
- 19800, 8, 44, 466033},
- {
- 20000, 9, 44, 0},
- {
- 25000, 10, 70, 419430},
- {
- 26000, 11, 67, 725937},
- {
- 30000, 12, 58, 699050},
- {
- 38400, 13, 45, 873813},
- {
- 40000, 14, 45, 0},
- {
- 0, 0, 0, 0}
-};
-
-#ifdef BCMUSBDEV
-#define PMU0_XTAL0_DEFAULT 11
-#else
-#define PMU0_XTAL0_DEFAULT 8
-#endif
-
-#ifdef BCMUSBDEV
-/*
- * Set new backplane PLL clock frequency
- */
-static void BCMINITFN (sb_pmu0_sbclk4328) (sb_t * sbh, int freq)
-{
- uint32 tmp, oldmax, oldmin, origidx;
- chipcregs_t *cc;
-
- /* Remember original core before switch to chipc */
- origidx = sb_coreidx (sbh);
- cc = sb_setcore (sbh, SB_CC, 0);
- ASSERT (cc);
-
- /* Set new backplane PLL clock */
- W_REG (osh, &cc->pllcontrol_addr, PMU0_PLL0_PLLCTL0);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- tmp &= ~(PMU0_PLL0_PC0_DIV_ARM_MASK);
- tmp |= freq << PMU0_PLL0_PC0_DIV_ARM_SHIFT;
- W_REG (osh, &cc->pllcontrol_data, tmp);
-
- /* Power cycle BB_PLL_PU by disabling/enabling it to take on new freq */
- /* Disable PLL */
- oldmin = R_REG (osh, &cc->min_res_mask);
- oldmax = R_REG (osh, &cc->max_res_mask);
- W_REG (osh, &cc->min_res_mask, oldmin & ~PMURES_BIT (RES4328_BB_PLL_PU));
- W_REG (osh, &cc->max_res_mask, oldmax & ~PMURES_BIT (RES4328_BB_PLL_PU));
-
- /* It takes over several hundred usec to re-enable the PLL since the
- * sequencer state machines run on ILP clock. Set delay at 450us to be safe.
- *
- * Be sure PLL is powered down first before re-enabling it.
- */
-
- OSL_DELAY (PLL_DELAY);
- SPINWAIT ((R_REG (osh, &cc->res_state) & PMURES_BIT (RES4328_BB_PLL_PU)),
- PLL_DELAY * 3);
-
- if (R_REG (osh, &cc->res_state) & PMURES_BIT (RES4328_BB_PLL_PU))
- {
- /* If BB_PLL not powered down yet, new backplane PLL clock
- * may not take effect.
- *
- * Still early during bootup so no serial output here.
- */
- PMU_ERROR (("Fatal: BB_PLL not power down yet!\n"));
- ASSERT (!
- (R_REG (osh, &cc->res_state) & PMURES_BIT (RES4328_BB_PLL_PU)));
- }
-
- /* Enable PLL */
- W_REG (osh, &cc->max_res_mask, oldmax);
-
- /* Return to original core */
- sb_setcoreidx (sbh, origidx);
-}
-#endif /* BCMUSBDEV */
-
-/* Set up PLL registers in the PMU as per the crystal speed.
- * Uses xtalfreq variable, or passed-in default.
- */
-static void
-BCMINITFN (sb_pmu0_pllinit0) (sb_t * sbh, osl_t * osh, chipcregs_t * cc,
- uint32 xtal)
-{
- uint32 tmp;
- const pmu0_xtaltab0_t *xt;
-
- if ((sb_chip (sbh) == BCM5354_CHIP_ID) && (xtal == 0))
- {
- /* 5354 has xtal freq of 25MHz */
- xtal = 25000;
- }
-
- /* Find the frequency in the table */
- for (xt = pmu0_xtaltab0; xt->freq; xt++)
- if (xt->freq == xtal)
- break;
- if (xt->freq == 0)
- xt = &pmu0_xtaltab0[PMU0_XTAL0_DEFAULT];
-
- PMU_MSG (("XTAL %d (%d)\n", xtal, xt->xf));
-
- /* Check current PLL state */
- tmp = (R_REG (osh, &cc->pmucontrol) & PCTL_XTALFREQ_MASK) >>
- PCTL_XTALFREQ_SHIFT;
- if (tmp == xt->xf)
- {
- PMU_MSG (("PLL already programmed for %d.%d MHz\n",
- (xt->freq / 1000), (xt->freq % 1000)));
-
-#ifdef BCMUSBDEV
- if (sbh->chip == BCM4328_CHIP_ID)
- sb_pmu0_sbclk4328 (sbh, PMU0_PLL0_PC0_DIV_ARM_88MHZ);
-#endif
- return;
- }
-
- if (tmp)
- {
- PMU_MSG (("Reprogramming PLL for %d.%d MHz (was %d.%dMHz)\n",
- (xt->freq / 1000), (xt->freq % 1000),
- (pmu0_xtaltab0[tmp - 1].freq / 1000),
- (pmu0_xtaltab0[tmp - 1].freq % 1000)));
- }
- else
- {
- PMU_MSG (("Programming PLL for %d.%d MHz\n", (xt->freq / 1000),
- (xt->freq % 1000)));
- }
-
- /* Make sure the PLL is off */
- switch (sbh->chip)
- {
- case BCM4328_CHIP_ID:
- AND_REG (osh, &cc->min_res_mask, ~PMURES_BIT (RES4328_BB_PLL_PU));
- AND_REG (osh, &cc->max_res_mask, ~PMURES_BIT (RES4328_BB_PLL_PU));
- break;
- case BCM5354_CHIP_ID:
- AND_REG (osh, &cc->min_res_mask, ~PMURES_BIT (RES5354_BB_PLL_PU));
- AND_REG (osh, &cc->max_res_mask, ~PMURES_BIT (RES5354_BB_PLL_PU));
- break;
- default:
- ASSERT (0);
- }
- SPINWAIT (R_REG (osh, &cc->clk_ctl_st) & CCS0_HTAVAIL,
- PMU_MAX_TRANSITION_DLY);
- ASSERT (!(R_REG (osh, &cc->clk_ctl_st) & CCS0_HTAVAIL));
-
- PMU_MSG (("Done masking\n"));
-
- /* Write PDIV in pllcontrol[0] */
- W_REG (osh, &cc->pllcontrol_addr, PMU0_PLL0_PLLCTL0);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- if (xt->freq >= PMU0_PLL0_PC0_PDIV_FREQ)
- tmp |= PMU0_PLL0_PC0_PDIV_MASK;
- else
- tmp &= ~PMU0_PLL0_PC0_PDIV_MASK;
- W_REG (osh, &cc->pllcontrol_data, tmp);
-
- /* Write WILD in pllcontrol[1] */
- W_REG (osh, &cc->pllcontrol_addr, PMU0_PLL0_PLLCTL1);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- tmp =
- ((tmp & ~(PMU0_PLL0_PC1_WILD_INT_MASK | PMU0_PLL0_PC1_WILD_FRAC_MASK)) |
- (((xt->
- wbint << PMU0_PLL0_PC1_WILD_INT_SHIFT) & PMU0_PLL0_PC1_WILD_INT_MASK)
- | ((xt->wbfrac << PMU0_PLL0_PC1_WILD_FRAC_SHIFT) &
- PMU0_PLL0_PC1_WILD_FRAC_MASK)));
- if (xt->wbfrac == 0)
- tmp |= PMU0_PLL0_PC1_STOP_MOD;
- else
- tmp &= ~PMU0_PLL0_PC1_STOP_MOD;
- W_REG (osh, &cc->pllcontrol_data, tmp);
-
- /* Write WILD in pllcontrol[2] */
- W_REG (osh, &cc->pllcontrol_addr, PMU0_PLL0_PLLCTL2);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- tmp = ((tmp & ~PMU0_PLL0_PC2_WILD_INT_MASK) |
- ((xt->wbint >> PMU0_PLL0_PC2_WILD_INT_SHIFT) &
- PMU0_PLL0_PC2_WILD_INT_MASK));
- W_REG (osh, &cc->pllcontrol_data, tmp);
-
- PMU_MSG (("Done pll\n"));
-
- /* Write XtalFreq. Set the divisor also. */
- tmp = R_REG (osh, &cc->pmucontrol);
- tmp = ((tmp & ~PCTL_ILP_DIV_MASK) |
- (((((xt->freq + 127) / 128) - 1) << PCTL_ILP_DIV_SHIFT) &
- PCTL_ILP_DIV_MASK));
- tmp = ((tmp & ~PCTL_XTALFREQ_MASK) |
- ((xt->xf << PCTL_XTALFREQ_SHIFT) & PCTL_XTALFREQ_MASK));
- W_REG (osh, &cc->pmucontrol, tmp);
-}
-
-static uint32
-BCMINITFN (sb_pmu0_alpclk0) (sb_t * sbh, osl_t * osh, chipcregs_t * cc)
-{
- const pmu0_xtaltab0_t *xt;
- uint32 xf;
-
- /* Find the frequency in the table */
- xf = (R_REG (osh, &cc->pmucontrol) & PCTL_XTALFREQ_MASK) >>
- PCTL_XTALFREQ_SHIFT;
- for (xt = pmu0_xtaltab0; xt->freq; xt++)
- if (xt->xf == xf)
- break;
- if (xt->freq == 0)
- xt = &pmu0_xtaltab0[PMU0_XTAL0_DEFAULT];
-
- return xt->freq * 1000;
-}
-
-static uint32
-BCMINITFN (sb_pmu0_cpuclk0) (sb_t * sbh, osl_t * osh, chipcregs_t * cc)
-{
- const pmu0_xtaltab0_t *xt;
- uint32 xf, tmp, divarm;
-#ifdef BCMDBG
- uint32 pdiv, wbint, wbfrac, fvco;
-#endif
-
- if (sb_chip (sbh) == BCM5354_CHIP_ID)
- {
- /* 5354 gets sb clock of 120MHz from main pll */
- return 120000000;
- }
-
- /* Find the xtal frequency in the table */
- xf = (R_REG (osh, &cc->pmucontrol) & PCTL_XTALFREQ_MASK) >>
- PCTL_XTALFREQ_SHIFT;
- for (xt = pmu0_xtaltab0; xt->freq; xt++)
- if (xt->xf == xf)
- break;
- if (xt->freq == 0)
- xt = &pmu0_xtaltab0[PMU0_XTAL0_DEFAULT];
-
- /* Read divarm from pllcontrol[0] */
- W_REG (osh, &cc->pllcontrol_addr, PMU0_PLL0_PLLCTL0);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- divarm = (tmp & PMU0_PLL0_PC0_DIV_ARM_MASK) >> PMU0_PLL0_PC0_DIV_ARM_SHIFT;
-
-#ifdef BCMDBG
- /* Calculate Fvco based on xtal freq, pdiv, and wild */
- pdiv = tmp & PMU0_PLL0_PC0_PDIV_MASK;
-
- W_REG (osh, &cc->pllcontrol_addr, PMU0_PLL0_PLLCTL1);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- wbfrac =
- (tmp & PMU0_PLL0_PC1_WILD_FRAC_MASK) >> PMU0_PLL0_PC1_WILD_FRAC_SHIFT;
- wbint = (tmp & PMU0_PLL0_PC1_WILD_INT_MASK) >> PMU0_PLL0_PC1_WILD_INT_SHIFT;
-
- W_REG (osh, &cc->pllcontrol_addr, PMU0_PLL0_PLLCTL2);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- wbint +=
- (tmp & PMU0_PLL0_PC2_WILD_INT_MASK) << PMU0_PLL0_PC2_WILD_INT_SHIFT;
-
- fvco = (xt->freq * wbint) << 8;
- fvco += (xt->freq * (wbfrac >> 10)) >> 2;
- fvco += (xt->freq * (wbfrac & 0x3ff)) >> 10;
- fvco >>= 8;
- fvco >>= pdiv;
- fvco /= 1000;
- fvco *= 1000;
-
- PMU_MSG (("sb_pmu0_cpuclk0: wbint %u wbfrac %u fvco %u\n",
- wbint, wbfrac, fvco));
- ASSERT (fvco == PMU0_PLL0_FVCO);
-#endif /* BCMDBG */
-
- /* Return ARM/SB clock */
- return PMU0_PLL0_FVCO / (divarm + PMU0_PLL0_PC0_DIV_ARM_BASE) * 1000;
-}
-
-/* PMU corerev 1 pll programming for BCM4325 */
-/* setup pll and query clock speed */
-typedef struct
-{
- uint16 fref;
- uint8 xf;
- uint8 p1div;
- uint8 p2div;
- uint8 ndiv_int;
- uint32 ndiv_frac;
-} pmu1_xtaltab0_t;
-
-/* the following table is based on 880Mhz Fvco */
-#define PMU1_PLL0_FVCO 880000 /* Fvco 880Mhz */
-static const pmu1_xtaltab0_t
-BCMINITDATA (pmu1_xtaltab0)[] =
-{
- {
- 12000, 1, 3, 22, 0x9, 0xFFFFEF},
- {
- 13000, 2, 1, 6, 0xb, 0x483483},
- {
- 14400, 3, 1, 10, 0xa, 0x1C71C7},
- {
- 15360, 4, 1, 5, 0xb, 0x755555},
- {
- 16200, 5, 1, 10, 0x5, 0x6E9E06},
- {
- 16800, 6, 1, 10, 0x5, 0x3Cf3Cf},
- {
- 19200, 7, 1, 9, 0x5, 0x17B425},
- {
- 19800, 8, 1, 11, 0x4, 0xA57EB},
- {
- 20000, 9, 1, 11, 0x4, 0x0},
- {
- 24000, 10, 3, 11, 0xa, 0x0},
- {
- 25000, 11, 5, 16, 0xb, 0x0},
- {
- 26000, 12, 1, 2, 0x10, 0xEC4EC4},
- {
- 30000, 13, 3, 8, 0xb, 0x0},
- {
- 38400, 14, 1, 5, 0x4, 0x955555},
- {
- 40000, 15, 1, 2, 0xb, 0},
- {
- 0, 0, 0, 0, 0, 0}
-};
-
-/* Default to 15360Khz crystal */
-#define PMU1_XTAL0_DEFAULT 3
-
-static uint32
-BCMINITFN (sb_pmu1_alpclk0) (sb_t * sbh, osl_t * osh, chipcregs_t * cc)
-{
- const pmu1_xtaltab0_t *xt;
- uint32 xf;
-
- /* Find the frequency in the table */
- xf = (R_REG (osh, &cc->pmucontrol) & PCTL_XTALFREQ_MASK) >>
- PCTL_XTALFREQ_SHIFT;
- for (xt = pmu1_xtaltab0; xt->fref; xt++)
- if (xt->xf == xf)
- break;
- if (xt->fref == 0)
- xt = &pmu1_xtaltab0[PMU1_XTAL0_DEFAULT];
-
- return xt->fref * 1000;
-}
-
-/* Set up PLL registers in the PMU as per the crystal speed.
- * Uses xtalfreq variable, or passed-in default.
- */
-static void
-BCMINITFN (sb_pmu1_pllinit0) (sb_t * sbh, osl_t * osh, chipcregs_t * cc,
- uint32 xtal)
-{
- const pmu1_xtaltab0_t *xt;
- uint32 tmp;
- uint32 buf_strength = 0;
-
- /* 4312: assume default works */
- if (sbh->chip == BCM4312_CHIP_ID)
- return;
-
- /* Find the frequency in the table */
- for (xt = pmu1_xtaltab0; xt->fref; xt++)
- if (xt->fref == xtal)
- break;
- if (xt->fref == 0)
- xt = &pmu1_xtaltab0[PMU1_XTAL0_DEFAULT];
-
- PMU_MSG (("XTAL %d (%d)\n", xtal, xt->xf));
-
- /* Check current PLL state */
- if (((R_REG (osh, &cc->pmucontrol) & PCTL_XTALFREQ_MASK) >>
- PCTL_XTALFREQ_SHIFT) == xt->xf)
- {
- PMU_MSG (("PLL already programmed for %d.%d MHz\n",
- (xt->fref / 1000), (xt->fref % 1000)));
- return;
- }
-
- PMU_MSG (("Programming PLL for %d.%d MHz\n", (xt->fref / 1000),
- (xt->fref % 1000)));
-
- /* Make sure the PLL is off */
- switch (sbh->chip)
- {
- case BCM4325_CHIP_ID:
- AND_REG (osh, &cc->min_res_mask,
- ~(PMURES_BIT (RES4325_BBPLL_PWRSW_PU) |
- PMURES_BIT (RES4325_HT_AVAIL)));
- AND_REG (osh, &cc->max_res_mask,
- ~(PMURES_BIT (RES4325_BBPLL_PWRSW_PU) |
- PMURES_BIT (RES4325_HT_AVAIL)));
-
- /* Change the BBPLL drive strength to 2 for all channels */
- buf_strength = 0x222222;
- break;
- default:
- ASSERT (0);
- }
- SPINWAIT (R_REG (osh, &cc->clk_ctl_st) & CCS_HTAVAIL,
- PMU_MAX_TRANSITION_DLY);
- ASSERT (!(R_REG (osh, &cc->clk_ctl_st) & CCS_HTAVAIL));
-
- PMU_MSG (("Done masking\n"));
-
- /* Write p1div and p2div to pllcontrol[0] */
- W_REG (osh, &cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0);
- tmp = R_REG (osh, &cc->pllcontrol_data) &
- ~(PMU1_PLL0_PC0_P1DIV_MASK | PMU1_PLL0_PC0_P2DIV_MASK);
- tmp |=
- ((xt->
- p1div << PMU1_PLL0_PC0_P1DIV_SHIFT) & PMU1_PLL0_PC0_P1DIV_MASK) | ((xt->
- p2div
- <<
- PMU1_PLL0_PC0_P2DIV_SHIFT)
- &
- PMU1_PLL0_PC0_P2DIV_MASK);
- W_REG (osh, &cc->pllcontrol_data, tmp);
-
- /* Write ndiv_int and ndiv_mode to pllcontrol[2] */
- W_REG (osh, &cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2);
- tmp = R_REG (osh, &cc->pllcontrol_data) &
- ~(PMU1_PLL0_PC2_NDIV_INT_MASK | PMU1_PLL0_PC2_NDIV_MODE_MASK);
- tmp |=
- ((xt->
- ndiv_int << PMU1_PLL0_PC2_NDIV_INT_SHIFT) & PMU1_PLL0_PC2_NDIV_INT_MASK)
- | ((1 << PMU1_PLL0_PC2_NDIV_MODE_SHIFT) & PMU1_PLL0_PC2_NDIV_MODE_MASK);
- W_REG (osh, &cc->pllcontrol_data, tmp);
-
- /* Write ndiv_frac to pllcontrol[3] */
- W_REG (osh, &cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3);
- tmp = R_REG (osh, &cc->pllcontrol_data) & ~PMU1_PLL0_PC3_NDIV_FRAC_MASK;
- tmp |= ((xt->ndiv_frac << PMU1_PLL0_PC3_NDIV_FRAC_SHIFT) &
- PMU1_PLL0_PC3_NDIV_FRAC_MASK);
- W_REG (osh, &cc->pllcontrol_data, tmp);
-
- if (buf_strength)
- {
- PMU_MSG (("Adjusting PLL buffer drive strength: %x\n", buf_strength));
-
- W_REG (osh, &cc->pllcontrol_addr, PMU1_PLL0_PLLCTL5);
- tmp = R_REG (osh, &cc->pllcontrol_data) & ~PMU1_PLL0_PC5_CLK_DRV_MASK;
- tmp |= (buf_strength << PMU1_PLL0_PC5_CLK_DRV_SHIFT);
- W_REG (osh, &cc->pllcontrol_data, tmp);
- }
-
- PMU_MSG (("Done pll\n"));
-
- /* Write XtalFreq. Set the divisor also. */
- tmp = R_REG (osh, &cc->pmucontrol) &
- ~(PCTL_ILP_DIV_MASK | PCTL_XTALFREQ_MASK);
- tmp |= (((((xt->fref + 127) / 128) - 1) << PCTL_ILP_DIV_SHIFT) &
- PCTL_ILP_DIV_MASK) |
- ((xt->xf << PCTL_XTALFREQ_SHIFT) & PCTL_XTALFREQ_MASK);
- W_REG (osh, &cc->pmucontrol, tmp);
-}
-
-
-static uint32
-BCMINITFN (sb_pmu1_cpuclk0) (sb_t * sbh, osl_t * osh, chipcregs_t * cc)
-{
- const pmu1_xtaltab0_t *xt;
- uint32 xf, tmp, m1div;
-#ifdef BCMDBG
- uint32 ndiv_int, ndiv_frac, p2div, p1div, fvco;
-#endif
-
- /* Find the xtal frequency in the table */
- xf = (R_REG (osh, &cc->pmucontrol) & PCTL_XTALFREQ_MASK) >>
- PCTL_XTALFREQ_SHIFT;
- for (xt = pmu1_xtaltab0; xt->fref; xt++)
- if (xt->xf == xf)
- break;
- if (xt->fref == 0)
- xt = &pmu1_xtaltab0[PMU1_XTAL0_DEFAULT];
-
- /* Read m1div from pllcontrol[1] */
- W_REG (osh, &cc->pllcontrol_addr, PMU1_PLL0_PLLCTL1);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- m1div = (tmp & PMU1_PLL0_PC1_M1DIV_MASK) >> PMU1_PLL0_PC1_M1DIV_SHIFT;
-
-#ifdef BCMDBG
- /* Read p2div/p1div from pllcontrol[0] */
- W_REG (osh, &cc->pllcontrol_addr, PMU1_PLL0_PLLCTL0);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- p2div = (tmp & PMU1_PLL0_PC0_P2DIV_MASK) >> PMU1_PLL0_PC0_P2DIV_SHIFT;
- p1div = (tmp & PMU1_PLL0_PC0_P1DIV_MASK) >> PMU1_PLL0_PC0_P1DIV_SHIFT;
-
- /* Calculate Fvco based on xtal freq and ndiv and pdiv */
- W_REG (osh, &cc->pllcontrol_addr, PMU1_PLL0_PLLCTL2);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- ndiv_int =
- (tmp & PMU1_PLL0_PC2_NDIV_INT_MASK) >> PMU1_PLL0_PC2_NDIV_INT_SHIFT;
-
- W_REG (osh, &cc->pllcontrol_addr, PMU1_PLL0_PLLCTL3);
- tmp = R_REG (osh, &cc->pllcontrol_data);
- ndiv_frac =
- (tmp & PMU1_PLL0_PC3_NDIV_FRAC_MASK) >> PMU1_PLL0_PC3_NDIV_FRAC_SHIFT;
-
- fvco = (xt->fref * ndiv_int) << 8;
- fvco += (xt->fref * (ndiv_frac >> 12)) >> 4;
- fvco += (xt->fref * (ndiv_frac & 0xfff)) >> 12;
- fvco >>= 8;
- fvco *= p2div;
- fvco /= p1div;
- fvco /= 1000;
- fvco *= 1000;
-
- PMU_MSG (("sb_pmu0_cpuclk0: ndiv_int %u ndiv_frac %u "
- "p2div %u p1div %u fvco %u\n",
- ndiv_int, ndiv_frac, p2div, p1div, fvco));
- ASSERT (fvco == PMU1_PLL0_FVCO);
-#endif /* BCMDBG */
-
- /* Return ARM/SB clock */
- return PMU1_PLL0_FVCO / m1div * 1000;
-}
-
-void BCMINITFN (sb_pmu_pll_init) (sb_t * sbh, osl_t * osh, uint xtalfreq)
-{
- chipcregs_t *cc;
- uint origidx;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = sb_coreidx (sbh);
- cc = sb_setcore (sbh, SB_CC, 0);
- ASSERT (cc);
-
- switch (sbh->chip)
- {
- case BCM4328_CHIP_ID:
- sb_pmu0_pllinit0 (sbh, osh, cc, xtalfreq);
- break;
- case BCM5354_CHIP_ID:
- sb_pmu0_pllinit0 (sbh, osh, cc, xtalfreq);
- break;
- case BCM4325_CHIP_ID:
- sb_pmu1_pllinit0 (sbh, osh, cc, xtalfreq);
- break;
- case BCM4312_CHIP_ID:
- sb_pmu1_pllinit0 (sbh, osh, cc, xtalfreq);
- break;
- default:
- PMU_MSG (("No PLL init done for chip %x rev %d pmurev %d\n",
- sbh->chip, sbh->chiprev, sbh->pmurev));
- break;
- }
-
- /* Return to original core */
- sb_setcoreidx (sbh, origidx);
-}
-
-uint32 BCMINITFN (sb_pmu_alp_clock) (sb_t * sbh, osl_t * osh)
-{
- chipcregs_t *cc;
- uint origidx;
- uint32 clock = ALP_CLOCK;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = sb_coreidx (sbh);
- cc = sb_setcore (sbh, SB_CC, 0);
- ASSERT (cc);
-
- switch (sbh->chip)
- {
- case BCM4328_CHIP_ID:
- clock = sb_pmu0_alpclk0 (sbh, osh, cc);
- break;
- case BCM5354_CHIP_ID:
- clock = sb_pmu0_alpclk0 (sbh, osh, cc);
- break;
- case BCM4325_CHIP_ID:
- clock = sb_pmu1_alpclk0 (sbh, osh, cc);
- break;
- case BCM4312_CHIP_ID:
- clock = sb_pmu1_alpclk0 (sbh, osh, cc);
- /* always 20Mhz */
- clock = 20000 * 1000;
- break;
- default:
- PMU_MSG (("No ALP clock specified "
- "for chip %x rev %d pmurev %d, using default %d Hz\n",
- sbh->chip, sbh->chiprev, sbh->pmurev, clock));
- break;
- }
-
- /* Return to original core */
- sb_setcoreidx (sbh, origidx);
- return clock;
-}
-
-uint BCMINITFN (sb_pmu_cpu_clock) (sb_t * sbh, osl_t * osh)
-{
- chipcregs_t *cc;
- uint origidx;
- uint32 clock = HT_CLOCK;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = sb_coreidx (sbh);
- cc = sb_setcore (sbh, SB_CC, 0);
- ASSERT (cc);
-
- switch (sbh->chip)
- {
- case BCM4328_CHIP_ID:
- clock = sb_pmu0_cpuclk0 (sbh, osh, cc);
- break;
- case BCM5354_CHIP_ID:
- clock = sb_pmu0_cpuclk0 (sbh, osh, cc);
- break;
- case BCM4325_CHIP_ID:
- clock = sb_pmu1_cpuclk0 (sbh, osh, cc);
- break;
- case BCM4312_CHIP_ID:
- clock = sb_pmu1_cpuclk0 (sbh, osh, cc);
- break;
- default:
- PMU_MSG (("No CPU clock specified "
- "for chip %x rev %d pmurev %d, using default %d Hz\n",
- sbh->chip, sbh->chiprev, sbh->pmurev, clock));
- break;
- }
-
- /* Return to original core */
- sb_setcoreidx (sbh, origidx);
- return clock;
-}
-
-void BCMINITFN (sb_pmu_init) (sb_t * sbh, osl_t * osh)
-{
- chipcregs_t *cc;
- uint origidx;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = sb_coreidx (sbh);
- cc = sb_setcore (sbh, SB_CC, 0);
- ASSERT (cc);
-
- if (sbh->pmurev >= 1)
- {
- if (sbh->chip == BCM4325_CHIP_ID && sbh->chiprev <= 1)
- AND_REG (osh, &cc->pmucontrol, ~PCTL_NOILP_ON_WAIT);
- else
- OR_REG (osh, &cc->pmucontrol, PCTL_NOILP_ON_WAIT);
- }
-
- /* Return to original core */
- sb_setcoreidx (sbh, origidx);
-}
-
-void BCMINITFN (sb_pmu_otp_power) (sb_t * sbh, osl_t * osh, bool on)
-{
- chipcregs_t *cc;
- uint origidx;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = sb_coreidx (sbh);
- cc = sb_setcore (sbh, SB_CC, 0);
- ASSERT (cc);
-
- switch (sbh->chip)
- {
- case BCM4325_CHIP_ID:
- if (on)
- {
- OR_REG (osh, &cc->min_res_mask, PMURES_BIT (RES4325_LNLDO2_PU));
- if (sbh->boardflags & BFL_BUCKBOOST)
- AND_REG (osh, &cc->min_res_mask,
- ~PMURES_BIT (RES4325_BUCK_BOOST_PWM));
- OSL_DELAY (500);
- }
- else
- {
- if (sbh->boardflags & BFL_BUCKBOOST)
- OR_REG (osh, &cc->min_res_mask,
- PMURES_BIT (RES4325_BUCK_BOOST_PWM));
- AND_REG (osh, &cc->min_res_mask, ~PMURES_BIT (RES4325_LNLDO2_PU));
- }
- break;
- default:
- break;
- }
-
- /* Return to original core */
- sb_setcoreidx (sbh, origidx);
-}
-
-void
-sb_pmu_rcal (sb_t * sbh, osl_t * osh)
-{
- chipcregs_t *cc;
- uint origidx;
-
- ASSERT (sbh->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = sb_coreidx (sbh);
- cc = sb_setcore (sbh, SB_CC, 0);
- ASSERT (cc);
-
- switch (sbh->chip)
- {
- case BCM4325_CHIP_ID:
- {
- uint8 rcal_code;
- uint32 val;
-
- /* Kick RCal */
- W_REG (osh, &cc->chipcontrol_addr, 1);
- AND_REG (osh, &cc->chipcontrol_data, ~0x04);
- OR_REG (osh, &cc->chipcontrol_data, 0x04);
-
- /* Wait for completion */
- SPINWAIT (0 == (R_REG (osh, &cc->chipstatus) & 0x08),
- 10 * 1000 * 1000);
- ASSERT (R_REG (osh, &cc->chipstatus) & 0x08);
-
- /* Drop the LSB to convert from 5 bit code to 4 bit code */
- rcal_code = (uint8) (R_REG (osh, &cc->chipstatus) >> 5) & 0x0f;
- PMU_MSG (("RCal completed, status 0x%x, code 0x%x\n",
- R_REG (osh, &cc->chipstatus), rcal_code));
-
- /* Write RCal code into pmu_vreg_ctrl[32:29] */
- W_REG (osh, &cc->regcontrol_addr, 0);
- val = R_REG (osh, &cc->regcontrol_data) & ~((uint32) 0x07 << 29);
- val |= (uint32) (rcal_code & 0x07) << 29;
- W_REG (osh, &cc->regcontrol_data, val);
- W_REG (osh, &cc->regcontrol_addr, 1);
- val = R_REG (osh, &cc->regcontrol_data) & ~(uint32) 0x01;
- val |= (uint32) ((rcal_code >> 3) & 0x01);
- W_REG (osh, &cc->regcontrol_data, val);
-
- /* Write RCal code into pmu_chip_ctrl[33:30] */
- W_REG (osh, &cc->chipcontrol_addr, 0);
- val = R_REG (osh, &cc->chipcontrol_data) & ~((uint32) 0x03 << 30);
- val |= (uint32) (rcal_code & 0x03) << 30;
- W_REG (osh, &cc->chipcontrol_data, val);
- W_REG (osh, &cc->chipcontrol_addr, 1);
- val = R_REG (osh, &cc->chipcontrol_data) & ~(uint32) 0x03;
- val |= (uint32) ((rcal_code >> 2) & 0x03);
- W_REG (osh, &cc->chipcontrol_data, val);
-
- /* Set override in pmu_chip_ctrl[29] */
- W_REG (osh, &cc->chipcontrol_addr, 0);
- OR_REG (osh, &cc->chipcontrol_data, (0x01 << 29));
-
- /* Power off RCal block */
- W_REG (osh, &cc->chipcontrol_addr, 1);
- AND_REG (osh, &cc->chipcontrol_data, ~0x04);
-
- break;
- }
- default:
- break;
- }
-
- /* Return to original core */
- sb_setcoreidx (sbh, origidx);
-}
+++ /dev/null
-/*
- * BCM4710 address space map and definitions
- * Think twice before adding to this file, this is not the kitchen sink
- * These definitions are not guaranteed for all 47xx chips, only the 4710
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _bcm4710_h_
-#define _bcm4710_h_
-
-/* Address map */
-#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */
-#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */
-#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */
-#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
-#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
-#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */
-
-/* Core register space */
-#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */
-#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */
-#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */
-#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */
-#define BCM4710_REG_USB 0x18004000 /* USB core registers */
-#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */
-#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */
-#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */
-#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */
-
-#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */
-#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */
-#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */
-#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */
-#define BCM4710_PROG 0x1f800000 /* Programable interface */
-#define BCM4710_FLASH 0x1fc00000 /* Flash */
-
-#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
-
-#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300)
-
-#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000)
-#define BCM4710_LED (BCM4710_EXTIF + 0x00900000)
-
-#define SBFLAG_PCI 0
-#define SBFLAG_ENET0 1
-#define SBFLAG_ILINE20 2
-#define SBFLAG_CODEC 3
-#define SBFLAG_USB 4
-#define SBFLAG_EXTIF 5
-#define SBFLAG_ENET1 6
-
-#ifdef CONFIG_HWSIM
-#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0)
-#else
-#define BCM4710_TRACE(trval)
-#endif
-
-
-/* BCM94702 CPCI -ExtIF used for LocalBus devs */
-
-#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF
-#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000)
-#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000)
-#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR
-#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000)
-#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000)
-#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
-#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0)
-
-#define LED_REG(x) \
- (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x)))
-
-/*
- * Reset function implemented in PLD. Read or write should trigger hard reset
- */
-#define SYS_HARD_RESET() \
- { for (;;) \
- *( (volatile unsigned char *)\
- KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \
- }
-
-#endif /* _bcm4710_h_ */
+++ /dev/null
-/*
- * Misc system wide definitions
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#ifndef _bcmdefs_h_
-#define _bcmdefs_h_
-
-/*
- * One doesn't need to include this file explicitly, gets included automatically if
- * typedefs.h is included.
- */
-
-/* Reclaiming text and data :
- * The following macros specify special linker sections that can be reclaimed
- * after a system is considered 'up'.
- */
-#if defined(__GNUC__) && defined(BCMRECLAIM)
-extern bool bcmreclaimed;
-#define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini." #_data))) _data
-#define BCMINITFN(_fn) __attribute__ ((__section__ (".textini." #_fn))) _fn
-#else /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
-#define BCMINITDATA(_data) _data
-#define BCMINITFN(_fn) _fn
-#define bcmreclaimed 0
-#endif /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
-
-/* Reclaim uninit functions if BCMNODOWN is defined */
-/* and if they are not already removed by -gc-sections */
-#ifdef BCMNODOWN
-#define BCMUNINITFN(_fn) BCMINITFN(_fn)
-#else
-#define BCMUNINITFN(_fn) _fn
-#endif
-
-#ifdef BCMRECLAIM
-#define CONST
-#else
-#define CONST const
-#endif /* BCMRECLAIM */
-
-/* Compatibility with old-style BCMRECLAIM */
-#define BCMINIT(_id) _id
-
-
-/* Put some library data/code into ROM to reduce RAM requirements */
-#if defined(__GNUC__) && defined(BCMROMOFFLOAD)
-#define BCMROMDATA(_data) __attribute__ ((__section__ (".datarom." #_data))) _data
-#define BCMROMFN(_fn) __attribute__ ((__section__ (".textrom." #_fn))) _fn
-#else
-#define BCMROMDATA(_data) _data
-#define BCMROMFN(_fn) _fn
-#endif
-
-/* Bus types */
-#define SB_BUS 0 /* Silicon Backplane */
-#define PCI_BUS 1 /* PCI target */
-#define PCMCIA_BUS 2 /* PCMCIA target */
-#define SDIO_BUS 3 /* SDIO target */
-#define JTAG_BUS 4 /* JTAG */
-#define NO_BUS 0xFF /* Bus that does not support R/W REG */
-
-/* Allows optimization for single-bus support */
-#ifdef BCMBUSTYPE
-#define BUSTYPE(bus) (BCMBUSTYPE)
-#else
-#define BUSTYPE(bus) (bus)
-#endif
-
-/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
-#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */
-#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */
-#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */
-
-#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */
-#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */
-#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */
-#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */
-
-/* packet headroom necessary to accomodate the largest header in the system, (i.e TXOFF).
- * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL.
- * There is a compile time check in wlc.c which ensure that this value is at least as big
- * as TXOFF. This value is used in dma_rxfill (hnddma.c).
- */
-#define BCMEXTRAHDROOM 160
-
-/* Headroom required for dongle-to-host communication. Packets allocated
- * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
- * leave this much room in front for low-level message headers which may
- * be needed to get across the dongle bus to the host. (These messages
- * don't go over the network, so room for the full WL header above would
- * be a waste.)
- */
-#define BCMDONGLEHDRSZ 8
-
-/* Max. nvram variable table size */
-#define MAXSZ_NVRAM_VARS 4096
-
-
-#endif /* _bcmdefs_h_ */
+++ /dev/null
-/*
- * Broadcom device-specific manifest constants.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#ifndef _BCMDEVS_H
-#define _BCMDEVS_H
-
-/* PCI vendor IDs */
-#define VENDOR_EPIGRAM 0xfeda
-#define VENDOR_BROADCOM 0x14e4
-#define VENDOR_3COM 0x10b7
-#define VENDOR_NETGEAR 0x1385
-#define VENDOR_DIAMOND 0x1092
-#define VENDOR_DELL 0x1028
-#define VENDOR_HP 0x0e11
-#define VENDOR_APPLE 0x106b
-#define VENDOR_SI_IMAGE 0x1095 /* Silicon Image, used by Arasan SDIO Host */
-#define VENDOR_BUFFALO 0x1154 /* Buffalo vendor id */
-#define VENDOR_TI 0x104c /* Texas Instruments */
-
-/* PCMCIA vendor IDs */
-#define VENDOR_BROADCOM_PCMCIA 0x02d0
-
-/* SDIO vendor IDs */
-#define VENDOR_BROADCOM_SDIO 0x00BF
-
-/* PCI Device IDs */
-#define BCM4210_DEVICE_ID 0x1072 /* never used */
-#define BCM4230_DEVICE_ID 0x1086 /* never used */
-#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */
-#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */
-#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */
-#define BCM4211_DEVICE_ID 0x4211
-#define BCM4231_DEVICE_ID 0x4231
-#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */
-#define BCM4311_D11G_ID 0x4311 /* 4311 802.11b/g id */
-#define BCM4311_D11DUAL_ID 0x4312 /* 4311 802.11a/b/g id */
-#define BCM4311_D11A_ID 0x4313 /* 4311 802.11a id */
-#define BCM4328_D11DUAL_ID 0x4314 /* 4328 802.11a/g id */
-#define BCM4328_D11G_ID 0x4315 /* 4328 802.11g 2.4Ghz band id */
-#define BCM4328_D11A_ID 0x4316 /* 4328 802.11a 5Ghz band id */
-#define BCM4318_D11G_ID 0x4318 /* 4318 802.11b/g id */
-#define BCM4318_D11DUAL_ID 0x4319 /* 4318 802.11a/b/g id */
-#define BCM4318_D11A_ID 0x431a /* 4318 802.11a id */
-#define BCM4325_D11DUAL_ID 0x431b /* 4325 802.11a/g id */
-#define BCM4325_D11G_ID 0x431c /* 4325 802.11g 2.4Ghz band id */
-#define BCM4325_D11A_ID 0x431d /* 4325 802.11a 5Ghz band id */
-#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */
-#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */
-#define BCM4306_UART_ID 0x4322 /* 4306 uart */
-#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */
-#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */
-#define BCM4306_D11G_ID2 0x4325
-#define BCM4321_D11N_ID 0x4328 /* 4321 802.11n dualband id */
-#define BCM4321_D11N2G_ID 0x4329 /* 4321 802.11n 2.4Ghz band id */
-#define BCM4321_D11N5G_ID 0x432a /* 4321 802.11n 5Ghz band id */
-#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */
-#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */
-#define FPGA_JTAGM_ID 0x43f0 /* FPGA jtagm device id */
-#define BCM_JTAGM_ID 0x43f1 /* BCM jtagm device id */
-#define SDIOH_FPGA_ID 0x43f2 /* sdio host fpga */
-#define BCM_SDIOH_ID 0x43f3 /* BCM sdio host id */
-#define SDIOD_FPGA_ID 0x43f4 /* sdio device fpga */
-#define SPIH_FPGA_ID 0x43f5 /* PCI SPI Host Controller FPGA */
-#define MIMO_FPGA_ID 0x43f8 /* FPGA mimo minimacphy device id */
-#define BCM4402_ENET_ID 0x4402 /* 4402 enet */
-#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */
-#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */
-#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */
-#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */
-#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */
-#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */
-#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */
-#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */
-#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */
-#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */
-#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */
-#define BCM47XX_USB_ID 0x4715 /* 47xx usb */
-#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */
-#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */
-#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */
-#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */
-#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */
-#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */
-#define BCM47XX_ATA100_ID 0x471d /* 47xx parallel ATA */
-#define BCM47XX_SATAXOR_ID 0x471e /* 47xx serial ATA & XOR DMA */
-#define BCM47XX_GIGETH_ID 0x471f /* 47xx GbE (5700) */
-#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */
-#define BCM47XX_SMBUS_EMU_ID 0x47fe /* 47xx emulated SMBus device */
-#define BCM47XX_XOR_EMU_ID 0x47ff /* 47xx emulated XOR engine */
-#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */
-#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */
-#define JINVANI_SDIOH_ID 0x4743 /* Jinvani SDIO Gold Host */
-#define BCM27XX_SDIOH_ID 0x2702 /* BCM27xx Standard SDIO Host */
-#define PCIXX21_FLASHMEDIA_ID 0x803b /* TI PCI xx21 Standard Host Controller */
-#define PCIXX21_SDIOH_ID 0x803c /* TI PCI xx21 Standard Host Controller */
-
-/* Chip IDs */
-#define BCM4710_CHIP_ID 0x4710 /* 4710 chipid returned by sb_chip() */
-#define BCM4402_CHIP_ID 0x4402 /* 4402 chipid */
-#define BCM4306_CHIP_ID 0x4306 /* 4306 chipcommon chipid */
-#define BCM4311_CHIP_ID 0x4311 /* 4311 PCIe 802.11a/b/g */
-#define BCM4704_CHIP_ID 0x4704 /* 4704 chipcommon chipid */
-#define BCM4312_CHIP_ID 0x4312 /* 4312 chip common chipid */
-#define BCM4318_CHIP_ID 0x4318 /* 4318 chip common chipid */
-#define BCM4321_CHIP_ID 0x4321 /* 4321 chip common chipid */
-#define BCM4328_CHIP_ID 0x4328 /* 4328 chip common chipid */
-#define BCM4325_CHIP_ID 0x4325 /* 4325 chip common chipid */
-#define BCM4712_CHIP_ID 0x4712 /* 4712 chipcommon chipid */
-#define BCM5365_CHIP_ID 0x5365 /* 5365 chipcommon chipid */
-#define BCM5350_CHIP_ID 0x5350 /* bcm5350 chipcommon chipid */
-#define BCM5352_CHIP_ID 0x5352 /* bcm5352 chipcommon chipid */
-#define BCM5354_CHIP_ID 0x5354 /* bcm5354 chipcommon chipid */
-#define BCM4320_CHIP_ID 0x4320 /* bcm4320 chipcommon chipid */
-#define BCM4785_CHIP_ID 0x4785 /* 4785 chipcommon chipid */
-
-/* Package IDs */
-#define BCM4303_PKG_ID 2 /* 4303 package id */
-#define BCM4309_PKG_ID 1 /* 4309 package id */
-#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */
-#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */
-#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */
-#define BCM4328USBD11G_PKG_ID 2 /* 4328 802.11g USB package id */
-#define BCM4328USBDUAL_PKG_ID 3 /* 4328 802.11a/g USB package id */
-#define BCM4328SDIOD11G_PKG_ID 4 /* 4328 802.11g SDIO package id */
-#define BCM4328SDIODUAL_PKG_ID 5 /* 4328 802.11a/g SDIO package id */
-#define BCM5354E_PKG_ID 1 /* 5354E package id */
-#define HDLSIM5350_PKG_ID 1 /* HDL simulator package id for a 5350 */
-#define HDLSIM_PKG_ID 14 /* HDL simulator package id */
-#define HWSIM_PKG_ID 15 /* Hardware simulator package id */
-
-#define PCIXX21_FLASHMEDIA0_ID 0x8033 /* TI PCI xx21 Standard Host Controller */
-#define PCIXX21_SDIOH0_ID 0x8034 /* TI PCI xx21 Standard Host Controller */
-/* boardflags */
-#define BFL_BTCOEXIST 0x00000001 /* This board implements Bluetooth coexistance */
-#define BFL_PACTRL 0x00000002 /* This board has gpio 9 controlling the PA */
-#define BFL_AIRLINEMODE 0x00000004 /* This board implements gpio13 radio disable indication */
-#define BFL_ADCDIV 0x00000008 /* This board has the rssi ADC divider */
-#define BFL_ENETROBO 0x00000010 /* This board has robo switch or core */
-#define BFL_NOPLLDOWN 0x00000020 /* Not ok to power down the chip pll and oscillator */
-#define BFL_CCKHIPWR 0x00000040 /* Can do high-power CCK transmission */
-#define BFL_ENETADM 0x00000080 /* This board has ADMtek switch */
-#define BFL_ENETVLAN 0x00000100 /* This board has vlan capability */
-#define BFL_AFTERBURNER 0x00000200 /* This board supports Afterburner mode */
-#define BFL_NOPCI 0x00000400 /* This board leaves PCI floating */
-#define BFL_FEM 0x00000800 /* This board supports the Front End Module */
-#define BFL_EXTLNA 0x00001000 /* This board has an external LNA */
-#define BFL_HGPA 0x00002000 /* This board has a high gain PA */
-#define BFL_BTCMOD 0x00004000 /* This board' BTCOEXIST is in the alternate gpios */
-#define BFL_ALTIQ 0x00008000 /* Alternate I/Q settings */
-#define BFL_NOPA 0x00010000 /* This board has no PA */
-#define BFL_RSSIINV 0x00020000 /* This board's RSSI uses positive slope */
-#define BFL_PAREF 0x00040000 /* This board uses the PARef LDO */
-#define BFL_3TSWITCH 0x00080000 /* This board uses a triple throw switch shared with BT */
-#define BFL_PHASESHIFTER 0x00100000 /* This board can support phase shifter */
-#define BFL_BUCKBOOST 0x00200000 /* This board has buck/booster */
-/* boardflags2 */
-#define BFL2_RXBB_INT_REG_DIS 0x00000001 /* This board has an external rxbb regulator */
-#define BFL2_DEPRECIATED_STUB 0x00000002 /* This board flag is depreciated */
-#define BFL2_TXPWRCTRL_EN 0x00000004 /* This board permits enabling TX Power Control */
-#define BFL2_2X4_DIV 0x00000008 /* This board supports the 2X4 diversity switch */
-#define BFL2_5G_PWRGAIN 0x00000010 /* This board supports 5G band power gain */
-#define BFL2_PCIEWAR_OVR 0x00000020 /* This board overrides ASPM and Clkreq settings */
-#define BFL2_CAESERS_BRD 0x00000040 /* This board is Dell Caeser's brd (unused by sw) */
-
-/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
-#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */
-#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */
-#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */
-#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */
-#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */
-#define BOARD_GPIO_ANT0_SEL 0x100 /* With BFL2_2X4_DIV */
-#define BOARD_GPIO_ANT1_SEL 0x200 /* With BFL2_2X4_DIV */
-
-#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
-#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
-#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
-#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
-
-/* power control defines */
-#define PLL_DELAY 150 /* us pll on delay */
-#define FREF_DELAY 200 /* us fref change delay */
-#define MIN_SLOW_CLK 32 /* us Slow clock period */
-#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */
-
-/* Reference Board Types */
-#define BU4710_BOARD 0x0400
-#define VSIM4710_BOARD 0x0401
-#define QT4710_BOARD 0x0402
-
-#define BU4309_BOARD 0x040a
-#define BCM94309CB_BOARD 0x040b
-#define BCM94309MP_BOARD 0x040c
-#define BCM4309AP_BOARD 0x040d
-
-#define BCM94302MP_BOARD 0x040e
-
-#define BU4306_BOARD 0x0416
-#define BCM94306CB_BOARD 0x0417
-#define BCM94306MP_BOARD 0x0418
-
-#define BCM94710D_BOARD 0x041a
-#define BCM94710R1_BOARD 0x041b
-#define BCM94710R4_BOARD 0x041c
-#define BCM94710AP_BOARD 0x041d
-
-#define BU2050_BOARD 0x041f
-
-
-#define BCM94309G_BOARD 0x0421
-
-#define BU4704_BOARD 0x0423
-#define BU4702_BOARD 0x0424
-
-#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */
-
-
-#define BCM94702MN_BOARD 0x0428
-
-/* BCM4702 1U CompactPCI Board */
-#define BCM94702CPCI_BOARD 0x0429
-
-/* BCM4702 with BCM95380 VLAN Router */
-#define BCM95380RR_BOARD 0x042a
-
-/* cb4306 with SiGe PA */
-#define BCM94306CBSG_BOARD 0x042b
-
-/* cb4306 with SiGe PA */
-#define PCSG94306_BOARD 0x042d
-
-/* bu4704 with sdram */
-#define BU4704SD_BOARD 0x042e
-
-/* Dual 11a/11g Router */
-#define BCM94704AGR_BOARD 0x042f
-
-/* 11a-only minipci */
-#define BCM94308MP_BOARD 0x0430
-
-
-
-#define BU4712_BOARD 0x0444
-#define BU4712SD_BOARD 0x045d
-#define BU4712L_BOARD 0x045f
-
-/* BCM4712 boards */
-#define BCM94712AP_BOARD 0x0445
-#define BCM94712P_BOARD 0x0446
-
-/* BCM4318 boards */
-#define BU4318_BOARD 0x0447
-#define CB4318_BOARD 0x0448
-#define MPG4318_BOARD 0x0449
-#define MP4318_BOARD 0x044a
-#define SD4318_BOARD 0x044b
-
-/* BCM63XX boards */
-#define BCM96338_BOARD 0x6338
-#define BCM96348_BOARD 0x6348
-#define BCM96358_BOARD 0x6358
-
-/* Another mp4306 with SiGe */
-#define BCM94306P_BOARD 0x044c
-
-/* mp4303 */
-#define BCM94303MP_BOARD 0x044e
-
-/* mpsgh4306 */
-#define BCM94306MPSGH_BOARD 0x044f
-
-/* BRCM 4306 w/ Front End Modules */
-#define BCM94306MPM 0x0450
-#define BCM94306MPL 0x0453
-
-/* 4712agr */
-#define BCM94712AGR_BOARD 0x0451
-
-/* pcmcia 4303 */
-#define PC4303_BOARD 0x0454
-
-/* 5350K */
-#define BCM95350K_BOARD 0x0455
-
-/* 5350R */
-#define BCM95350R_BOARD 0x0456
-
-/* 4306mplna */
-#define BCM94306MPLNA_BOARD 0x0457
-
-/* 4320 boards */
-#define BU4320_BOARD 0x0458
-#define BU4320S_BOARD 0x0459
-#define BCM94320PH_BOARD 0x045a
-
-/* 4306mph */
-#define BCM94306MPH_BOARD 0x045b
-
-/* 4306pciv */
-#define BCM94306PCIV_BOARD 0x045c
-
-#define BU4712SD_BOARD 0x045d
-
-#define BCM94320PFLSH_BOARD 0x045e
-
-#define BU4712L_BOARD 0x045f
-#define BCM94712LGR_BOARD 0x0460
-#define BCM94320R_BOARD 0x0461
-
-#define BU5352_BOARD 0x0462
-
-#define BCM94318MPGH_BOARD 0x0463
-
-#define BU4311_BOARD 0x0464
-#define BCM94311MC_BOARD 0x0465
-#define BCM94311MCAG_BOARD 0x0466
-
-#define BCM95352GR_BOARD 0x0467
-
-/* bcm95351agr */
-#define BCM95351AGR_BOARD 0x0470
-
-/* bcm94704mpcb */
-#define BCM94704MPCB_BOARD 0x0472
-
-/* 4785 boards */
-#define BU4785_BOARD 0x0478
-
-/* 4321 boards */
-#define BU4321_BOARD 0x046b
-#define BU4321E_BOARD 0x047c
-#define MP4321_BOARD 0x046c
-#define CB2_4321_BOARD 0x046d
-#define MC4321_BOARD 0x046e
-
-/* 4328 boards */
-#define BU4328_BOARD 0x0481
-#define BCM4328SDG_BOARD 0x0482
-#define BCM4328SDAG_BOARD 0x0483
-#define BCM4328UG_BOARD 0x0484
-#define BCM4328UAG_BOARD 0x0485
-#define BCM4328PC_BOARD 0x0486
-#define BCM4328CF_BOARD 0x0487
-
-/* 4325 boards */
-#define BU4325_BOARD 0x0490
-
-/* # of GPIO pins */
-#define GPIO_NUMPINS 16
-
-/* radio ID codes */
-#define NORADIO_ID 0xe4f5
-#define NORADIO_IDCODE 0x4e4f5246
-
-#define BCM2050_ID 0x2050
-#define BCM2050_IDCODE 0x02050000
-#define BCM2050A0_IDCODE 0x1205017f
-#define BCM2050A1_IDCODE 0x2205017f
-#define BCM2050R8_IDCODE 0x8205017f
-
-#define BCM2055_ID 0x2055
-#define BCM2055_IDCODE 0x02055000
-#define BCM2055A0_IDCODE 0x1205517f
-
-#define BCM2060_ID 0x2060
-#define BCM2060_IDCODE 0x02060000
-#define BCM2060WW_IDCODE 0x1206017f
-
-#define BCM2062_ID 0x2062
-#define BCM2062_IDCODE 0x02062000
-#define BCM2062A0_IDCODE 0x0206217f
-
-#define BCM2063_ID 0x2063
-#define BCM2063_IDCODE 0x02063000
-#define BCM2063A0_IDCODE 0x0206317f
-
-/* parts of an idcode: */
-#define IDCODE_MFG_MASK 0x00000fff
-#define IDCODE_MFG_SHIFT 0
-#define IDCODE_ID_MASK 0x0ffff000
-#define IDCODE_ID_SHIFT 12
-#define IDCODE_REV_MASK 0xf0000000
-#define IDCODE_REV_SHIFT 28
-
-#endif /* _BCMDEVS_H */
+++ /dev/null
-/*
- * Broadcom device-specific manifest constants.
- *
- * Copyright 2005, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#ifndef _BCMDEVS_H
-#define _BCMDEVS_H
-
-
-/* Known PCI vendor Id's */
-#define VENDOR_EPIGRAM 0xfeda
-#define VENDOR_BROADCOM 0x14e4
-#define VENDOR_3COM 0x10b7
-#define VENDOR_NETGEAR 0x1385
-#define VENDOR_DIAMOND 0x1092
-#define VENDOR_DELL 0x1028
-#define VENDOR_HP 0x0e11
-#define VENDOR_APPLE 0x106b
-
-/* PCI Device Id's */
-#define BCM4210_DEVICE_ID 0x1072 /* never used */
-#define BCM4211_DEVICE_ID 0x4211
-#define BCM4230_DEVICE_ID 0x1086 /* never used */
-#define BCM4231_DEVICE_ID 0x4231
-
-#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */
-#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */
-#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */
-#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */
-
-#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */
-#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */
-
-#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */
-#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */
-
-#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */
-#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */
-#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */
-#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */
-#define BCM47XX_USB_ID 0x4715 /* 47xx usb */
-#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */
-#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */
-#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */
-#define BCM47XX_ROBO_ID 0x4719 /* 47xx/53xx roboswitch core */
-#define BCM47XX_USB20H_ID 0x471a /* 47xx usb 2.0 host */
-#define BCM47XX_USB20D_ID 0x471b /* 47xx usb 2.0 device */
-
-#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */
-
-#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */
-#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */
-#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */
-#define BCM4610_ENET_ID 0x4613 /* 4610 enet */
-#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */
-#define BCM4610_USB_ID 0x4615 /* 4610 usb */
-
-#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */
-#define BCM4402_ENET_ID 0x4402 /* 4402 enet */
-#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */
-#define BCM4401_ENET_ID 0x170c /* 4401b0 production enet cards */
-
-#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */
-#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */
-
-#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */
-#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */
-#define BCM4307_ENET_ID 0x4306 /* 4307 enet */
-#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */
-
-#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */
-#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */
-#define BCM4306_D11G_ID2 0x4325
-#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */
-#define BCM4306_UART_ID 0x4322 /* 4306 uart */
-#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */
-#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */
-
-#define BCM4309_PKG_ID 1 /* 4309 package id */
-
-#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */
-#define BCM4303_PKG_ID 2 /* 4303 package id */
-
-#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */
-#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */
-#define BCM4310_UART_ID 0x4312 /* 4310 uart */
-#define BCM4310_ENET_ID 0x4313 /* 4310 enet */
-#define BCM4310_USB_ID 0x4315 /* 4310 usb */
-
-#define BCMGPRS_UART_ID 0x4333 /* Uart id used by 4306/gprs card */
-#define BCMGPRS2_UART_ID 0x4344 /* Uart id used by 4306/gprs card */
-
-
-#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */
-#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */
-
-#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */
-
-#define BCM4318_DEVICE_ID 0x4318 /* 4318 chip common chipid */
-#define BCM4318_D11G_ID 0x4318 /* 4318 801.11b/g id */
-#define BCM4318_D11DUAL_ID 0x4319 /* 4318 801.11a/b/g id */
-#define BCM4318_JTAGM_ID 0x4331 /* 4318 jtagm device id */
-
-#define FPGA_JTAGM_ID 0x4330 /* ??? */
-
-/* Address map */
-#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */
-#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */
-#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */
-#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
-#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
-#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */
-
-/* Core register space */
-#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */
-#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */
-#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */
-#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */
-#define BCM4710_REG_USB 0x18004000 /* USB core registers */
-#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */
-#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */
-#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */
-#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */
-
-#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */
-#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */
-#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */
-#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */
-#define BCM4710_PROG 0x1f800000 /* Programable interface */
-#define BCM4710_FLASH 0x1fc00000 /* Flash */
-
-#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
-
-#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300)
-
-#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000)
-#define BCM4710_LED (BCM4710_EXTIF + 0x00900000)
-
-#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */
-#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */
-#define BCM4712LARGE_PKG_ID 0 /* 340pin 4712 package id */
-#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */
-#define BCM4712MID_PKG_ID 2 /* 225pin 4712 package id */
-
-#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */
-
-#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */
-#define BCM5350_DEVICE_ID 0x5350 /* bcm5350 chipcommon chipid */
-#define BCM5352_DEVICE_ID 0x5352 /* bcm5352 chipcommon chipid */
-
-#define BCM4320_DEVICE_ID 0x4320 /* bcm4320 chipcommon chipid */
-
-/* PCMCIA vendor Id's */
-
-#define VENDOR_BROADCOM_PCMCIA 0x02d0
-
-/* SDIO vendor Id's */
-#define VENDOR_BROADCOM_SDIO 0x00BF
-
-
-/* boardflags */
-#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */
-#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */
-#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */
-#define BFL_ENETROBO 0x0010 /* This board has robo switch or core */
-#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */
-#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */
-#define BFL_ENETVLAN 0x0100 /* This board has vlan capability */
-#define BFL_AFTERBURNER 0x0200 /* This board supports Afterburner mode */
-#define BFL_NOPCI 0x0400 /* This board leaves PCI floating */
-#define BFL_FEM 0x0800 /* This board supports the Front End Module */
-#define BFL_EXTLNA 0x1000 /* This board has an external LNA */
-#define BFL_HGPA 0x2000 /* This board has a high gain PA */
-#define BFL_BTCMOD 0x4000 /* This board' BTCOEXIST is in the alternate gpios */
-#define BFL_ALTIQ 0x8000 /* Alternate I/Q settings */
-
-/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
-#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */
-#define BOARD_GPIO_BTCMOD_IN 0x010 /* bit 4 is the alternate BT Coexistance Input */
-#define BOARD_GPIO_BTCMOD_OUT 0x020 /* bit 5 is the alternate BT Coexistance Out */
-#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */
-#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */
-#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */
-#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
-#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
-#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
-#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
-
-/* Bus types */
-#define SB_BUS 0 /* Silicon Backplane */
-#define PCI_BUS 1 /* PCI target */
-#define PCMCIA_BUS 2 /* PCMCIA target */
-#define SDIO_BUS 3 /* SDIO target */
-#define JTAG_BUS 4 /* JTAG */
-
-/* Allows optimization for single-bus support */
-#ifdef BCMBUSTYPE
-#define BUSTYPE(bus) (BCMBUSTYPE)
-#else
-#define BUSTYPE(bus) (bus)
-#endif
-
-/* power control defines */
-#define PLL_DELAY 150 /* us pll on delay */
-#define FREF_DELAY 200 /* us fref change delay */
-#define MIN_SLOW_CLK 32 /* us Slow clock period */
-#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */
-
-/* Reference Board Types */
-
-#define BU4710_BOARD 0x0400
-#define VSIM4710_BOARD 0x0401
-#define QT4710_BOARD 0x0402
-
-#define BU4610_BOARD 0x0403
-#define VSIM4610_BOARD 0x0404
-
-#define BU4307_BOARD 0x0405
-#define BCM94301CB_BOARD 0x0406
-#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */
-#define BCM94301MP_BOARD 0x0407
-#define BCM94307MP_BOARD 0x0408
-#define BCMAP4307_BOARD 0x0409
-
-#define BU4309_BOARD 0x040a
-#define BCM94309CB_BOARD 0x040b
-#define BCM94309MP_BOARD 0x040c
-#define BCM4309AP_BOARD 0x040d
-
-#define BCM94302MP_BOARD 0x040e
-
-#define VSIM4310_BOARD 0x040f
-#define BU4711_BOARD 0x0410
-#define BCM94310U_BOARD 0x0411
-#define BCM94310AP_BOARD 0x0412
-#define BCM94310MP_BOARD 0x0414
-
-#define BU4306_BOARD 0x0416
-#define BCM94306CB_BOARD 0x0417
-#define BCM94306MP_BOARD 0x0418
-
-#define BCM94710D_BOARD 0x041a
-#define BCM94710R1_BOARD 0x041b
-#define BCM94710R4_BOARD 0x041c
-#define BCM94710AP_BOARD 0x041d
-
-
-#define BU2050_BOARD 0x041f
-
-
-#define BCM94309G_BOARD 0x0421
-
-#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */
-
-#define BU4704_BOARD 0x0423
-#define BU4702_BOARD 0x0424
-
-#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */
-
-#define BU4317_BOARD 0x0426
-
-
-#define BCM94702MN_BOARD 0x0428
-
-/* BCM4702 1U CompactPCI Board */
-#define BCM94702CPCI_BOARD 0x0429
-
-/* BCM4702 with BCM95380 VLAN Router */
-#define BCM95380RR_BOARD 0x042a
-
-/* cb4306 with SiGe PA */
-#define BCM94306CBSG_BOARD 0x042b
-
-/* mp4301 with 2050 radio */
-#define BCM94301MPL_BOARD 0x042c
-
-/* cb4306 with SiGe PA */
-#define PCSG94306_BOARD 0x042d
-
-/* bu4704 with sdram */
-#define BU4704SD_BOARD 0x042e
-
-/* Dual 11a/11g Router */
-#define BCM94704AGR_BOARD 0x042f
-
-/* 11a-only minipci */
-#define BCM94308MP_BOARD 0x0430
-
-
-
-/* BCM94317 boards */
-#define BCM94317CB_BOARD 0x0440
-#define BCM94317MP_BOARD 0x0441
-#define BCM94317PCMCIA_BOARD 0x0442
-#define BCM94317SDIO_BOARD 0x0443
-
-#define BU4712_BOARD 0x0444
-#define BU4712SD_BOARD 0x045d
-#define BU4712L_BOARD 0x045f
-
-/* BCM4712 boards */
-#define BCM94712AP_BOARD 0x0445
-#define BCM94712P_BOARD 0x0446
-
-/* BCM4318 boards */
-#define BU4318_BOARD 0x0447
-#define CB4318_BOARD 0x0448
-#define MPG4318_BOARD 0x0449
-#define MP4318_BOARD 0x044a
-#define SD4318_BOARD 0x044b
-
-/* BCM63XX boards */
-#define BCM96338_BOARD 0x6338
-#define BCM96345_BOARD 0x6345
-#define BCM96348_BOARD 0x6348
-
-/* Another mp4306 with SiGe */
-#define BCM94306P_BOARD 0x044c
-
-/* CF-like 4317 modules */
-#define BCM94317CF_BOARD 0x044d
-
-/* mp4303 */
-#define BCM94303MP_BOARD 0x044e
-
-/* mpsgh4306 */
-#define BCM94306MPSGH_BOARD 0x044f
-
-/* BRCM 4306 w/ Front End Modules */
-#define BCM94306MPM 0x0450
-#define BCM94306MPL 0x0453
-
-/* 4712agr */
-#define BCM94712AGR_BOARD 0x0451
-
-/* The real CF 4317 board */
-#define CFI4317_BOARD 0x0452
-
-/* pcmcia 4303 */
-#define PC4303_BOARD 0x0454
-
-/* 5350K */
-#define BCM95350K_BOARD 0x0455
-
-/* 5350R */
-#define BCM95350R_BOARD 0x0456
-
-/* 4306mplna */
-#define BCM94306MPLNA_BOARD 0x0457
-
-/* 4320 boards */
-#define BU4320_BOARD 0x0458
-#define BU4320S_BOARD 0x0459
-#define BCM94320PH_BOARD 0x045a
-
-/* 4306mph */
-#define BCM94306MPH_BOARD 0x045b
-
-/* 4306pciv */
-#define BCM94306PCIV_BOARD 0x045c
-
-#define BU4712SD_BOARD 0x045d
-
-#define BCM94320PFLSH_BOARD 0x045e
-
-#define BU4712L_BOARD 0x045f
-#define BCM94712LGR_BOARD 0x0460
-#define BCM94320R_BOARD 0x0461
-
-#define BU5352_BOARD 0x0462
-
-#define BCM94318MPGH_BOARD 0x0463
-
-
-#define BCM95352GR_BOARD 0x0467
-
-/* bcm95351agr */
-#define BCM95351AGR_BOARD 0x0470
-
-/* # of GPIO pins */
-#define GPIO_NUMPINS 16
-
-#endif /* _BCMDEVS_H */
+++ /dev/null
-/*
- * local version of endian.h - byte order defines
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
-*/
-
-#ifndef _BCMENDIAN_H_
-#define _BCMENDIAN_H_
-
-#include <typedefs.h>
-
-/* Byte swap a 16 bit value */
-#define BCMSWAP16(val) \
- ((uint16)(\
- (((uint16)(val) & (uint16)0x00ffU) << 8) | \
- (((uint16)(val) & (uint16)0xff00U) >> 8)))
-
-/* Byte swap a 32 bit value */
-#define BCMSWAP32(val) \
- ((uint32)(\
- (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \
- (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \
- (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \
- (((uint32)(val) & (uint32)0xff000000UL) >> 24)))
-
-/* 2 Byte swap a 32 bit value */
-#define BCMSWAP32BY16(val) \
- ((uint32)(\
- (((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \
- (((uint32)(val) & (uint32)0xffff0000UL) >> 16)))
-
-
-static INLINE uint16
-bcmswap16(uint16 val)
-{
- return BCMSWAP16(val);
-}
-
-static INLINE uint32
-bcmswap32(uint32 val)
-{
- return BCMSWAP32(val);
-}
-
-static INLINE uint32
-bcmswap32by16(uint32 val)
-{
- return BCMSWAP32BY16(val);
-}
-
-/* buf - start of buffer of shorts to swap */
-/* len - byte length of buffer */
-static INLINE void
-bcmswap16_buf(uint16 *buf, uint len)
-{
- len = len/2;
-
- while (len--) {
- *buf = bcmswap16(*buf);
- buf++;
- }
-}
-
-#ifndef hton16
-#ifndef IL_BIGENDIAN
-#define HTON16(i) BCMSWAP16(i)
-#define hton16(i) bcmswap16(i)
-#define hton32(i) bcmswap32(i)
-#define ntoh16(i) bcmswap16(i)
-#define ntoh32(i) bcmswap32(i)
-#define ltoh16(i) (i)
-#define ltoh32(i) (i)
-#define htol16(i) (i)
-#define htol32(i) (i)
-#else
-#define HTON16(i) (i)
-#define hton16(i) (i)
-#define hton32(i) (i)
-#define ntoh16(i) (i)
-#define ntoh32(i) (i)
-#define ltoh16(i) bcmswap16(i)
-#define ltoh32(i) bcmswap32(i)
-#define htol16(i) bcmswap16(i)
-#define htol32(i) bcmswap32(i)
-#endif /* IL_BIGENDIAN */
-#endif /* hton16 */
-
-#ifndef IL_BIGENDIAN
-#define ltoh16_buf(buf, i)
-#define htol16_buf(buf, i)
-#else
-#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-#endif /* IL_BIGENDIAN */
-
-/*
-* store 16-bit value to unaligned little endian byte array.
-*/
-static INLINE void
-htol16_ua_store(uint16 val, uint8 *bytes)
-{
- bytes[0] = val&0xff;
- bytes[1] = val>>8;
-}
-
-/*
-* store 32-bit value to unaligned little endian byte array.
-*/
-static INLINE void
-htol32_ua_store(uint32 val, uint8 *bytes)
-{
- bytes[0] = val&0xff;
- bytes[1] = (val>>8)&0xff;
- bytes[2] = (val>>16)&0xff;
- bytes[3] = val>>24;
-}
-
-/*
-* store 16-bit value to unaligned network(big) endian byte array.
-*/
-static INLINE void
-hton16_ua_store(uint16 val, uint8 *bytes)
-{
- bytes[1] = val&0xff;
- bytes[0] = val>>8;
-}
-
-/*
-* store 32-bit value to unaligned network(big) endian byte array.
-*/
-static INLINE void
-hton32_ua_store(uint32 val, uint8 *bytes)
-{
- bytes[3] = val&0xff;
- bytes[2] = (val>>8)&0xff;
- bytes[1] = (val>>16)&0xff;
- bytes[0] = val>>24;
-}
-
-/*
-* load 16-bit value from unaligned little endian byte array.
-*/
-static INLINE uint16
-ltoh16_ua(void *bytes)
-{
- return (((uint8*)bytes)[1]<<8)+((uint8 *)bytes)[0];
-}
-
-/*
-* load 32-bit value from unaligned little endian byte array.
-*/
-static INLINE uint32
-ltoh32_ua(void *bytes)
-{
- return (((uint8*)bytes)[3]<<24)+(((uint8*)bytes)[2]<<16)+
- (((uint8*)bytes)[1]<<8)+((uint8*)bytes)[0];
-}
-
-/*
-* load 16-bit value from unaligned big(network) endian byte array.
-*/
-static INLINE uint16
-ntoh16_ua(void *bytes)
-{
- return (((uint8*)bytes)[0]<<8)+((uint8*)bytes)[1];
-}
-
-/*
-* load 32-bit value from unaligned big(network) endian byte array.
-*/
-static INLINE uint32
-ntoh32_ua(void *bytes)
-{
- return (((uint8*)bytes)[0]<<24)+(((uint8*)bytes)[1]<<16)+
- (((uint8*)bytes)[2]<<8)+((uint8*)bytes)[3];
-}
-
-#define ltoh_ua(ptr) (\
- sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \
- sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \
- (((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \
-)
-
-#define ntoh_ua(ptr) (\
- sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \
- sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \
- (((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \
-)
-
-#endif /* _BCMENDIAN_H_ */
+++ /dev/null
-/*
- * NVRAM variable manipulation
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _bcmnvram_h_
-#define _bcmnvram_h_
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-#include <typedefs.h>
-#include <bcmdefs.h>
-
-struct nvram_header {
- uint32 magic;
- uint32 len;
- uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */
- uint32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */
- uint32 config_ncdl; /* ncdl values for memc */
-};
-
-struct nvram_tuple {
- char *name;
- char *value;
- struct nvram_tuple *next;
-};
-
-/*
- * Get default value for an NVRAM variable
- */
-extern char *nvram_default_get(const char *name);
-
-/*
- * Append a chunk of nvram variables to the global list
- */
-extern int nvram_append(void *sb, char *vars, uint varsz);
-
-/*
- * Check for reset button press for restoring factory defaults.
- */
-extern bool nvram_reset(void *sbh);
-
-/*
- * Disable NVRAM access. May be unnecessary or undefined on certain
- * platforms.
- */
-extern void nvram_exit(void *sbh);
-
-/*
- * Get the value of an NVRAM variable. The pointer returned may be
- * invalid after a set.
- * @param name name of variable to get
- * @return value of variable or NULL if undefined
- */
-extern char * nvram_get(const char *name);
-
-/*
- * Read the reset GPIO value from the nvram and set the GPIO
- * as input
- */
-extern int BCMINITFN(nvram_resetgpio_init)(void *sbh);
-
-/*
- * Get the value of an NVRAM variable.
- * @param name name of variable to get
- * @return value of variable or NUL if undefined
- */
-#define nvram_safe_get(name) (nvram_get(name) ? : "")
-
-/*
- * Match an NVRAM variable.
- * @param name name of variable to match
- * @param match value to compare against value of variable
- * @return TRUE if variable is defined and its value is string equal
- * to match or FALSE otherwise
- */
-static INLINE int
-nvram_match(char *name, char *match) {
- const char *value = nvram_get(name);
- return (value && !strcmp(value, match));
-}
-
-/*
- * Inversely match an NVRAM variable.
- * @param name name of variable to match
- * @param match value to compare against value of variable
- * @return TRUE if variable is defined and its value is not string
- * equal to invmatch or FALSE otherwise
- */
-static INLINE int
-nvram_invmatch(char *name, char *invmatch) {
- const char *value = nvram_get(name);
- return (value && strcmp(value, invmatch));
-}
-
-/*
- * Set the value of an NVRAM variable. The name and value strings are
- * copied into private storage. Pointers to previously set values
- * may become invalid. The new value may be immediately
- * retrieved but will not be permanently stored until a commit.
- * @param name name of variable to set
- * @param value value of variable
- * @return 0 on success and errno on failure
- */
-extern int nvram_set(const char *name, const char *value);
-
-/*
- * Unset an NVRAM variable. Pointers to previously set values
- * remain valid until a set.
- * @param name name of variable to unset
- * @return 0 on success and errno on failure
- * NOTE: use nvram_commit to commit this change to flash.
- */
-extern int nvram_unset(const char *name);
-
-/*
- * Commit NVRAM variables to permanent storage. All pointers to values
- * may be invalid after a commit.
- * NVRAM values are undefined after a commit.
- * @return 0 on success and errno on failure
- */
-extern int nvram_commit(void);
-
-/*
- * Get all NVRAM variables (format name=value\0 ... \0\0).
- * @param buf buffer to store variables
- * @param count size of buffer in bytes
- * @return 0 on success and errno on failure
- */
-extern int nvram_getall(char *nvram_buf, int count);
-
-/*
- * returns the crc value of the nvram
- * @param nvh nvram header pointer
- */
-extern uint8 nvram_calc_crc(struct nvram_header * nvh);
-
-extern char* getvar(char *vars, const char *name);
-extern int getintvar(char *vars, const char *name);
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-/* The NVRAM version number stored as an NVRAM variable */
-#define NVRAM_SOFTWARE_VERSION "1"
-
-#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */
-#define NVRAM_CLEAR_MAGIC 0x0
-#define NVRAM_INVALID_MAGIC 0xFFFFFFFF
-#define NVRAM_VERSION 1
-#define NVRAM_HEADER_SIZE 20
-#define NVRAM_SPACE 0x8000
-
-#define NVRAM_MAX_VALUE_LEN 255
-#define NVRAM_MAX_PARAM_LEN 64
-
-#define NVRAM_CRC_START_POSITION 9 /* magic, len, crc8 to be skipped */
-#define NVRAM_CRC_VER_MASK 0xffffff00 /* for crc_ver_init */
-
-#endif /* _bcmnvram_h_ */
+++ /dev/null
-/*
- * Misc useful routines to access NIC local SROM/OTP .
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _bcmsrom_h_
-#define _bcmsrom_h_
-
-/* Maximum srom: 4 Kilobits == 512 bytes */
-#define SROM_MAX 512
-
-
-#define SROM_WORDS 64
-
-#define SROM3_SWRGN_OFF 28 /* s/w region offset in words */
-
-#define SROM_SSID 2
-
-#define SROM_WL1LHMAXP 29
-
-#define SROM_WL1LPAB0 30
-#define SROM_WL1LPAB1 31
-#define SROM_WL1LPAB2 32
-
-#define SROM_WL1HPAB0 33
-#define SROM_WL1HPAB1 34
-#define SROM_WL1HPAB2 35
-
-#define SROM_MACHI_IL0 36
-#define SROM_MACMID_IL0 37
-#define SROM_MACLO_IL0 38
-#define SROM_MACHI_ET0 39
-#define SROM_MACMID_ET0 40
-#define SROM_MACLO_ET0 41
-#define SROM_MACHI_ET1 42
-#define SROM_MACMID_ET1 43
-#define SROM_MACLO_ET1 44
-#define SROM3_MACHI 37
-#define SROM3_MACMID 38
-#define SROM3_MACLO 39
-
-#define SROM_BXARSSI2G 40
-#define SROM_BXARSSI5G 41
-
-#define SROM_TRI52G 42
-#define SROM_TRI5GHL 43
-
-#define SROM_RXPO52G 45
-
-#define SROM2_ENETPHY 45
-
-#define SROM_AABREV 46
-/* Fields in AABREV */
-#define SROM_BR_MASK 0x00ff
-#define SROM_CC_MASK 0x0f00
-#define SROM_CC_SHIFT 8
-#define SROM_AA0_MASK 0x3000
-#define SROM_AA0_SHIFT 12
-#define SROM_AA1_MASK 0xc000
-#define SROM_AA1_SHIFT 14
-
-#define SROM_WL0PAB0 47
-#define SROM_WL0PAB1 48
-#define SROM_WL0PAB2 49
-
-#define SROM_LEDBH10 50
-#define SROM_LEDBH32 51
-
-#define SROM_WL10MAXP 52
-
-#define SROM_WL1PAB0 53
-#define SROM_WL1PAB1 54
-#define SROM_WL1PAB2 55
-
-#define SROM_ITT 56
-
-#define SROM_BFL 57
-#define SROM_BFL2 28
-#define SROM3_BFL2 61
-
-#define SROM_AG10 58
-
-#define SROM_CCODE 59
-
-#define SROM_OPO 60
-
-#define SROM3_LEDDC 62
-
-#define SROM_CRCREV 63
-
-/* SROM Rev 4: Reallocate the software part of the srom to accomodate
- * MIMO features. It assumes up to two PCIE functions and 440 bytes
- * of useable srom i.e. the useable storage in chips with OTP that
- * implements hardware redundancy.
- */
-
-#define SROM4_WORDS 220
-
-#define SROM4_SIGN 32
-#define SROM4_SIGNATURE 0x5372
-
-#define SROM4_BREV 33
-
-#define SROM4_BFL0 34
-#define SROM4_BFL1 35
-#define SROM4_BFL2 36
-#define SROM4_BFL3 37
-#define SROM5_BFL0 37
-#define SROM5_BFL1 38
-#define SROM5_BFL2 39
-#define SROM5_BFL3 40
-
-#define SROM4_MACHI 38
-#define SROM4_MACMID 39
-#define SROM4_MACLO 40
-#define SROM5_MACHI 41
-#define SROM5_MACMID 42
-#define SROM5_MACLO 43
-
-#define SROM4_CCODE 41
-#define SROM4_REGREV 42
-#define SROM5_CCODE 34
-#define SROM5_REGREV 35
-
-#define SROM4_LEDBH10 43
-#define SROM4_LEDBH32 44
-#define SROM5_LEDBH10 59
-#define SROM5_LEDBH32 60
-
-#define SROM4_LEDDC 45
-#define SROM5_LEDDC 45
-
-#define SROM4_AA 46
-#define SROM4_AA2G_MASK 0x00ff
-#define SROM4_AA2G_SHIFT 0
-#define SROM4_AA5G_MASK 0xff00
-#define SROM4_AA5G_SHIFT 8
-
-#define SROM4_AG10 47
-#define SROM4_AG32 48
-
-#define SROM4_TXPID2G 49
-#define SROM4_TXPID5G 51
-#define SROM4_TXPID5GL 53
-#define SROM4_TXPID5GH 55
-
-#define SROM4_TXRXC 61
-#define SROM4_TXCHAIN_MASK 0x000f
-#define SROM4_TXCHAIN_SHIFT 0
-#define SROM4_RXCHAIN_MASK 0x00f0
-#define SROM4_RXCHAIN_SHIFT 4
-#define SROM4_SWITCH_MASK 0xff00
-#define SROM4_SWITCH_SHIFT 8
-
-/* Per-path fields */
-#define MAX_PATH 4
-#define SROM4_PATH0 64
-#define SROM4_PATH1 87
-#define SROM4_PATH2 110
-#define SROM4_PATH3 133
-
-#define SROM4_2G_ITT_MAXP 0
-#define SROM4_2G_PA 1
-#define SROM4_5G_ITT_MAXP 5
-#define SROM4_5GLH_MAXP 6
-#define SROM4_5G_PA 7
-#define SROM4_5GL_PA 11
-#define SROM4_5GH_PA 15
-
-/* Fields in the ITT_MAXP and 5GLH_MAXP words */
-#define B2G_MAXP_MASK 0xff
-#define B2G_ITT_SHIFT 8
-#define B5G_MAXP_MASK 0xff
-#define B5G_ITT_SHIFT 8
-#define B5GH_MAXP_MASK 0xff
-#define B5GL_MAXP_SHIFT 8
-
-/* All the miriad power offsets */
-#define SROM4_2G_CCKPO 156
-#define SROM4_2G_OFDMPO 157
-#define SROM4_5G_OFDMPO 159
-#define SROM4_5GL_OFDMPO 161
-#define SROM4_5GH_OFDMPO 163
-#define SROM4_2G_MCSPO 165
-#define SROM4_5G_MCSPO 173
-#define SROM4_5GL_MCSPO 181
-#define SROM4_5GH_MCSPO 189
-#define SROM4_CDDPO 197
-#define SROM4_STBCPO 198
-#define SROM4_BW40PO 199
-#define SROM4_BWDUPPO 200
-
-#define SROM4_CRCREV 219
-
-
-/*SROM Rev 8: Make space for a 48word hardware header for PCIe rev >= 6.
- * This is acombined srom for both MIMO and SISO boards, usable in
- * the .130 4Kilobit OTP with hardware redundancy.
- */
-
-#define SROM8_SIGN 64
-
-#define SROM8_BREV 65
-
-#define SROM8_BFL0 66
-#define SROM8_BFL1 67
-#define SROM8_BFL2 68
-#define SROM8_BFL3 69
-
-#define SROM8_MACHI 70
-#define SROM8_MACMID 71
-#define SROM8_MACLO 72
-
-#define SROM8_CCODE 73
-#define SROM8_REGREV 74
-
-#define SROM8_LEDBH10 75
-#define SROM8_LEDBH32 76
-
-#define SROM8_LEDDC 77
-
-#define SROM8_AA 78
-
-#define SROM8_AG10 79
-#define SROM8_AG32 80
-
-#define SROM8_TXRXC 81
-
-#define SROM8_BXARSSI2G 82
-#define SROM8_BXARSSI5G 83
-#define SROM8_TRI52G 84
-#define SROM8_TRI5GHL 85
-#define SROM8_RXPO52G 86
-
-/* Per-path offsets & fields */
-#define SROM8_PATH0 96
-#define SROM8_PATH1 112
-#define SROM8_PATH2 128
-#define SROM8_PATH3 144
-
-#define SROM8_2G_ITT_MAXP 0
-#define SROM8_2G_PA 1
-#define SROM8_5G_ITT_MAXP 4
-#define SROM8_5GLH_MAXP 5
-#define SROM8_5G_PA 6
-#define SROM8_5GL_PA 9
-#define SROM8_5GH_PA 12
-
-/* All the miriad power offsets */
-#define SROM8_2G_CCKPO 160
-
-#define SROM8_2G_OFDMPO 161
-#define SROM8_5G_OFDMPO 163
-#define SROM8_5GL_OFDMPO 165
-#define SROM8_5GH_OFDMPO 167
-
-#define SROM8_2G_MCSPO 169
-#define SROM8_5G_MCSPO 177
-#define SROM8_5GL_MCSPO 185
-#define SROM8_5GH_MCSPO 193
-
-#define SROM8_CDDPO 201
-#define SROM8_STBCPO 202
-#define SROM8_BW40PO 203
-#define SROM8_BWDUPPO 204
-
-/* SISO PA parameters are in the path0 spaces */
-#define SROM8_SISO 96
-
-/* Legacy names for SISO PA paramters */
-#define SROM8_W0_ITTMAXP (SROM8_SISO + SROM8_2G_ITT_MAXP)
-#define SROM8_W0_PAB0 (SROM8_SISO + SROM8_2G_PA)
-#define SROM8_W0_PAB1 (SROM8_SISO + SROM8_2G_PA + 1)
-#define SROM8_W0_PAB2 (SROM8_SISO + SROM8_2G_PA + 2)
-#define SROM8_W1_ITTMAXP (SROM8_SISO + SROM8_5G_ITT_MAXP)
-#define SROM8_W1_MAXP_LCHC (SROM8_SISO + SROM8_5GLH_MAXP)
-#define SROM8_W1_PAB0 (SROM8_SISO + SROM8_5G_PA)
-#define SROM8_W1_PAB1 (SROM8_SISO + SROM8_5G_PA + 1)
-#define SROM8_W1_PAB2 (SROM8_SISO + SROM8_5G_PA + 2)
-#define SROM8_W1_PAB0_LC (SROM8_SISO + SROM8_5GL_PA)
-#define SROM8_W1_PAB1_LC (SROM8_SISO + SROM8_5GL_PA + 1)
-#define SROM8_W1_PAB2_LC (SROM8_SISO + SROM8_5GL_PA + 2)
-#define SROM8_W1_PAB0_HC (SROM8_SISO + SROM8_5GH_PA)
-#define SROM8_W1_PAB1_HC (SROM8_SISO + SROM8_5GH_PA + 1)
-#define SROM8_W1_PAB2_HC (SROM8_SISO + SROM8_5GH_PA + 2)
-
-#define SROM8_CRCREV 219
-
-/* Prototypes */
-extern int srom_var_init(sb_t *sbh, uint bus, void *curmap, osl_t *osh,
- char **vars, uint *count);
-
-extern int srom_read(sb_t *sbh, uint bus, void *curmap, osl_t *osh,
- uint byteoff, uint nbytes, uint16 *buf);
-extern int srom_write(sb_t *sbh, uint bus, void *curmap, osl_t *osh,
- uint byteoff, uint nbytes, uint16 *buf);
-
-extern int srom_parsecis(osl_t *osh, uint8 **pcis, uint ciscnt,
- char **vars, uint *count);
-
-#endif /* _bcmsrom_h_ */
+++ /dev/null
-/*
- * Misc useful os-independent macros and functions.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- * $Id$
- */
-
-#ifndef _bcmutils_h_
-#define _bcmutils_h_
-
-/* ctype replacement */
-#define _BCM_U 0x01 /* upper */
-#define _BCM_L 0x02 /* lower */
-#define _BCM_D 0x04 /* digit */
-#define _BCM_C 0x08 /* cntrl */
-#define _BCM_P 0x10 /* punct */
-#define _BCM_S 0x20 /* white space (space/lf/tab) */
-#define _BCM_X 0x40 /* hex digit */
-#define _BCM_SP 0x80 /* hard space (0x20) */
-
-extern const unsigned char bcm_ctype[];
-#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
-
-#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
-#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
-#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0)
-#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0)
-#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
-#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0)
-#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
-#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0)
-#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0)
-#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0)
-#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
-#define bcm_tolower(c) (bcm_isupper((c)) ? ((c) + 'a' - 'A') : (c))
-#define bcm_toupper(c) (bcm_islower((c)) ? ((c) + 'A' - 'a') : (c))
-
-/* Buffer structure for collecting string-formatted data
-* using bcm_bprintf() API.
-* Use bcm_binit() to initialize before use
-*/
-
-struct bcmstrbuf {
- char *buf; /* pointer to current position in origbuf */
- unsigned int size; /* current (residual) size in bytes */
- char *origbuf; /* unmodified pointer to orignal buffer */
- unsigned int origsize; /* unmodified orignal buffer size in bytes */
-};
-
-/* ** driver-only section ** */
-#ifdef BCMDRIVER
-#include <osl.h>
-
-#define GPIO_PIN_NOTDEFINED 0x20 /* Pin not defined */
-
-/*
- * Spin at most 'us' microseconds while 'exp' is true.
- * Caller should explicitly test 'exp' when this completes
- * and take appropriate error action if 'exp' is still true.
- */
-#define SPINWAIT(exp, us) { \
- uint countdown = (us) + 9; \
- while ((exp) && (countdown >= 10)) {\
- OSL_DELAY(10); \
- countdown -= 10; \
- } \
-}
-
-
-/* osl multi-precedence packet queue */
-#ifndef PKTQ_LEN_DEFAULT
-#define PKTQ_LEN_DEFAULT 128 /* Max 128 packets */
-#endif
-#ifndef PKTQ_MAX_PREC
-#define PKTQ_MAX_PREC 16 /* Maximum precedence levels */
-#endif
-
-typedef struct pktq_prec {
- void *head; /* first packet to dequeue */
- void *tail; /* last packet to dequeue */
- uint16 len; /* number of queued packets */
- uint16 max; /* maximum number of queued packets */
-} pktq_prec_t;
-
-
-/* multi-priority pkt queue */
-struct pktq {
- uint16 num_prec; /* number of precedences in use */
- uint16 hi_prec; /* rapid dequeue hint (>= highest non-empty prec) */
- uint16 max; /* total max packets */
- uint16 len; /* total number of packets */
- /* q array must be last since # of elements can be either PKTQ_MAX_PREC or 1 */
- struct pktq_prec q[PKTQ_MAX_PREC];
-};
-
-/* simple, non-priority pkt queue */
-struct spktq {
- uint16 num_prec; /* number of precedences in use (always 1) */
- uint16 hi_prec; /* rapid dequeue hint (>= highest non-empty prec) */
- uint16 max; /* total max packets */
- uint16 len; /* total number of packets */
- /* q array must be last since # of elements can be either PKTQ_MAX_PREC or 1 */
- struct pktq_prec q[1];
-};
-
-#define PKTQ_PREC_ITER(pq, prec) for (prec = (pq)->num_prec - 1; prec >= 0; prec--)
-
-/* forward definition of ether_addr structure used by some function prototypes */
-
-struct ether_addr;
-
-/* operations on a specific precedence in packet queue */
-
-#define pktq_psetmax(pq, prec, _max) ((pq)->q[prec].max = (_max))
-#define pktq_plen(pq, prec) ((pq)->q[prec].len)
-#define pktq_pavail(pq, prec) ((pq)->q[prec].max - (pq)->q[prec].len)
-#define pktq_pfull(pq, prec) ((pq)->q[prec].len >= (pq)->q[prec].max)
-#define pktq_pempty(pq, prec) ((pq)->q[prec].len == 0)
-
-#define pktq_ppeek(pq, prec) ((pq)->q[prec].head)
-#define pktq_ppeek_tail(pq, prec) ((pq)->q[prec].tail)
-
-extern void *pktq_penq(struct pktq *pq, int prec, void *p);
-extern void *pktq_penq_head(struct pktq *pq, int prec, void *p);
-extern void *pktq_pdeq(struct pktq *pq, int prec);
-extern void *pktq_pdeq_tail(struct pktq *pq, int prec);
-/* Empty the queue at particular precedence level */
-extern void pktq_pflush(osl_t *osh, struct pktq *pq, int prec, bool dir);
-/* Remove a specified packet from its queue */
-extern bool pktq_pdel(struct pktq *pq, void *p, int prec);
-
-/* operations on a set of precedences in packet queue */
-
-extern int pktq_mlen(struct pktq *pq, uint prec_bmp);
-extern void *pktq_mdeq(struct pktq *pq, uint prec_bmp, int *prec_out);
-
-/* operations on packet queue as a whole */
-
-#define pktq_len(pq) ((int)(pq)->len)
-#define pktq_max(pq) ((int)(pq)->max)
-#define pktq_avail(pq) ((int)((pq)->max - (pq)->len))
-#define pktq_full(pq) ((pq)->len >= (pq)->max)
-#define pktq_empty(pq) ((pq)->len == 0)
-
-/* operations for single precedence queues */
-#define pktenq(pq, p) pktq_penq(((struct pktq *)pq), 0, (p))
-#define pktenq_head(pq, p) pktq_penq_head(((struct pktq *)pq), 0, (p))
-#define pktdeq(pq) pktq_pdeq(((struct pktq *)pq), 0)
-#define pktdeq_tail(pq) pktq_pdeq_tail(((struct pktq *)pq), 0)
-#define pktqinit(pq, len) pktq_init(((struct pktq *)pq), 1, len)
-
-extern void pktq_init(struct pktq *pq, int num_prec, int max_len);
-/* prec_out may be NULL if caller is not interested in return value */
-extern void *pktq_deq(struct pktq *pq, int *prec_out);
-extern void *pktq_deq_tail(struct pktq *pq, int *prec_out);
-extern void *pktq_peek(struct pktq *pq, int *prec_out);
-extern void *pktq_peek_tail(struct pktq *pq, int *prec_out);
-extern void pktq_flush(osl_t *osh, struct pktq *pq, bool dir); /* Empty the entire queue */
-extern int pktq_setmax(struct pktq *pq, int max_len);
-
-/* externs */
-/* packet */
-extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf);
-extern uint pkttotlen(osl_t *osh, void *p);
-extern void *pktlast(osl_t *osh, void *p);
-
-/* Get priority from a packet and pass it back in scb (or equiv) */
-extern uint pktsetprio(void *pkt, bool update_vtag);
-#define PKTPRIO_VDSCP 0x100 /* DSCP prio found after VLAN tag */
-#define PKTPRIO_VLAN 0x200 /* VLAN prio found */
-#define PKTPRIO_UPD 0x400 /* DSCP used to update VLAN prio */
-#define PKTPRIO_DSCP 0x800 /* DSCP prio found */
-
-/* string */
-extern int BCMROMFN(bcm_atoi)(char *s);
-extern ulong BCMROMFN(bcm_strtoul)(char *cp, char **endp, uint base);
-extern char *BCMROMFN(bcmstrstr)(char *haystack, char *needle);
-extern char *BCMROMFN(bcmstrcat)(char *dest, const char *src);
-extern char *BCMROMFN(bcmstrncat)(char *dest, const char *src, uint size);
-extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen);
-/* ethernet address */
-extern char *bcm_ether_ntoa(struct ether_addr *ea, char *buf);
-extern int BCMROMFN(bcm_ether_atoe)(char *p, struct ether_addr *ea);
-
-/* ip address */
-struct ipv4_addr;
-extern char *bcm_ip_ntoa(struct ipv4_addr *ia, char *buf);
-
-/* delay */
-extern void bcm_mdelay(uint ms);
-/* variable access */
-extern char *getvar(char *vars, const char *name);
-extern int getintvar(char *vars, const char *name);
-extern uint getgpiopin(char *vars, char *pin_name, uint def_pin);
-#ifdef BCMPERFSTATS
-extern void bcm_perf_enable(void);
-extern void bcmstats(char *fmt);
-extern void bcmlog(char *fmt, uint a1, uint a2);
-extern void bcmdumplog(char *buf, int size);
-extern int bcmdumplogent(char *buf, uint idx);
-#else
-#define bcm_perf_enable()
-#define bcmstats(fmt)
-#define bcmlog(fmt, a1, a2)
-#define bcmdumplog(buf, size) *buf = '\0'
-#define bcmdumplogent(buf, idx) -1
-#endif /* BCMPERFSTATS */
-extern char *bcm_nvram_vars(uint *length);
-extern int bcm_nvram_cache(void *sbh);
-
-/* Support for sharing code across in-driver iovar implementations.
- * The intent is that a driver use this structure to map iovar names
- * to its (private) iovar identifiers, and the lookup function to
- * find the entry. Macros are provided to map ids and get/set actions
- * into a single number space for a switch statement.
- */
-
-/* iovar structure */
-typedef struct bcm_iovar {
- const char *name; /* name for lookup and display */
- uint16 varid; /* id for switch */
- uint16 flags; /* driver-specific flag bits */
- uint16 type; /* base type of argument */
- uint16 minlen; /* min length for buffer vars */
-} bcm_iovar_t;
-
-/* varid definitions are per-driver, may use these get/set bits */
-
-/* IOVar action bits for id mapping */
-#define IOV_GET 0 /* Get an iovar */
-#define IOV_SET 1 /* Set an iovar */
-
-/* Varid to actionid mapping */
-#define IOV_GVAL(id) ((id)*2)
-#define IOV_SVAL(id) (((id)*2)+IOV_SET)
-#define IOV_ISSET(actionid) ((actionid & IOV_SET) == IOV_SET)
-
-/* flags are per-driver based on driver attributes */
-
-extern const bcm_iovar_t *bcm_iovar_lookup(const bcm_iovar_t *table, const char *name);
-extern int bcm_iovar_lencheck(const bcm_iovar_t *table, void *arg, int len, bool set);
-
-#endif /* BCMDRIVER */
-
-/* Base type definitions */
-#define IOVT_VOID 0 /* no value (implictly set only) */
-#define IOVT_BOOL 1 /* any value ok (zero/nonzero) */
-#define IOVT_INT8 2 /* integer values are range-checked */
-#define IOVT_UINT8 3 /* unsigned int 8 bits */
-#define IOVT_INT16 4 /* int 16 bits */
-#define IOVT_UINT16 5 /* unsigned int 16 bits */
-#define IOVT_INT32 6 /* int 32 bits */
-#define IOVT_UINT32 7 /* unsigned int 32 bits */
-#define IOVT_BUFFER 8 /* buffer is size-checked as per minlen */
-#define BCM_IOVT_VALID(type) (((unsigned int)(type)) <= IOVT_BUFFER)
-
-/* Initializer for IOV type strings */
-#define BCM_IOV_TYPE_INIT { \
- "void", \
- "bool", \
- "int8", \
- "uint8", \
- "int16", \
- "uint16", \
- "int32", \
- "uint32", \
- "buffer", \
- "" }
-
-#define BCM_IOVT_IS_INT(type) (\
- (type == IOVT_BOOL) || \
- (type == IOVT_INT8) || \
- (type == IOVT_UINT8) || \
- (type == IOVT_INT16) || \
- (type == IOVT_UINT16) || \
- (type == IOVT_INT32) || \
- (type == IOVT_UINT32))
-
-/* ** driver/apps-shared section ** */
-
-#define BCME_STRLEN 64 /* Max string length for BCM errors */
-#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST))
-
-
-/*
- * error codes could be added but the defined ones shouldn't be changed/deleted
- * these error codes are exposed to the user code
- * when ever a new error code is added to this list
- * please update errorstring table with the related error string and
- * update osl files with os specific errorcode map
-*/
-
-#define BCME_OK 0 /* Success */
-#define BCME_ERROR -1 /* Error generic */
-#define BCME_BADARG -2 /* Bad Argument */
-#define BCME_BADOPTION -3 /* Bad option */
-#define BCME_NOTUP -4 /* Not up */
-#define BCME_NOTDOWN -5 /* Not down */
-#define BCME_NOTAP -6 /* Not AP */
-#define BCME_NOTSTA -7 /* Not STA */
-#define BCME_BADKEYIDX -8 /* BAD Key Index */
-#define BCME_RADIOOFF -9 /* Radio Off */
-#define BCME_NOTBANDLOCKED -10 /* Not band locked */
-#define BCME_NOCLK -11 /* No Clock */
-#define BCME_BADRATESET -12 /* BAD Rate valueset */
-#define BCME_BADBAND -13 /* BAD Band */
-#define BCME_BUFTOOSHORT -14 /* Buffer too short */
-#define BCME_BUFTOOLONG -15 /* Buffer too long */
-#define BCME_BUSY -16 /* Busy */
-#define BCME_NOTASSOCIATED -17 /* Not Associated */
-#define BCME_BADSSIDLEN -18 /* Bad SSID len */
-#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel */
-#define BCME_BADCHAN -20 /* Bad Channel */
-#define BCME_BADADDR -21 /* Bad Address */
-#define BCME_NORESOURCE -22 /* Not Enough Resources */
-#define BCME_UNSUPPORTED -23 /* Unsupported */
-#define BCME_BADLEN -24 /* Bad length */
-#define BCME_NOTREADY -25 /* Not Ready */
-#define BCME_EPERM -26 /* Not Permitted */
-#define BCME_NOMEM -27 /* No Memory */
-#define BCME_ASSOCIATED -28 /* Associated */
-#define BCME_RANGE -29 /* Not In Range */
-#define BCME_NOTFOUND -30 /* Not Found */
-#define BCME_WME_NOT_ENABLED -31 /* WME Not Enabled */
-#define BCME_TSPEC_NOTFOUND -32 /* TSPEC Not Found */
-#define BCME_ACM_NOTSUPPORTED -33 /* ACM Not Supported */
-#define BCME_NOT_WME_ASSOCIATION -34 /* Not WME Association */
-#define BCME_SDIO_ERROR -35 /* SDIO Bus Error */
-#define BCME_DONGLE_DOWN -36 /* Dongle Not Accessible */
-#define BCME_VERSION -37 /* Incorrect version */
-#define BCME_LAST BCME_VERSION
-
-/* These are collection of BCME Error strings */
-#define BCMERRSTRINGTABLE { \
- "OK", \
- "Undefined error", \
- "Bad Argument", \
- "Bad Option", \
- "Not up", \
- "Not down", \
- "Not AP", \
- "Not STA", \
- "Bad Key Index", \
- "Radio Off", \
- "Not band locked", \
- "No clock", \
- "Bad Rate valueset", \
- "Bad Band", \
- "Buffer too short", \
- "Buffer too long", \
- "Busy", \
- "Not Associated", \
- "Bad SSID len", \
- "Out of Range Channel", \
- "Bad Channel", \
- "Bad Address", \
- "Not Enough Resources", \
- "Unsupported", \
- "Bad length", \
- "Not Ready", \
- "Not Permitted", \
- "No Memory", \
- "Associated", \
- "Not In Range", \
- "Not Found", \
- "WME Not Enabled", \
- "TSPEC Not Found", \
- "ACM Not Supported", \
- "Not WME Association", \
- "SDIO Bus Error", \
- "Dongle Not Accessible", \
- "Incorrect version" \
-}
-
-#ifndef ABS
-#define ABS(a) (((a) < 0)?-(a):(a))
-#endif /* ABS */
-
-#ifndef MIN
-#define MIN(a, b) (((a) < (b))?(a):(b))
-#endif /* MIN */
-
-#ifndef MAX
-#define MAX(a, b) (((a) > (b))?(a):(b))
-#endif /* MAX */
-
-#define CEIL(x, y) (((x) + ((y)-1)) / (y))
-#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
-#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0)
-#define ISPOWEROF2(x) ((((x)-1)&(x)) == 0)
-#define VALID_MASK(mask) !((mask) & ((mask) + 1))
-#ifndef OFFSETOF
-#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member)
-#endif /* OFFSETOF */
-#ifndef ARRAYSIZE
-#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0]))
-#endif
-
-/* bit map related macros */
-#ifndef setbit
-#ifndef NBBY /* the BSD family defines NBBY */
-#define NBBY 8 /* 8 bits per byte */
-#endif /* #ifndef NBBY */
-#define setbit(a, i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
-#define clrbit(a, i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-#define isset(a, i) (((const uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
-#define isclr(a, i) ((((const uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-#endif /* setbit */
-
-#define NBITS(type) (sizeof(type) * 8)
-#define NBITVAL(nbits) (1 << (nbits))
-#define MAXBITVAL(nbits) ((1 << (nbits)) - 1)
-#define NBITMASK(nbits) MAXBITVAL(nbits)
-#define MAXNBVAL(nbyte) MAXBITVAL((nbyte) * 8)
-
-/* basic mux operation - can be optimized on several architectures */
-#define MUX(pred, true, false) ((pred) ? (true) : (false))
-
-/* modulo inc/dec - assumes x E [0, bound - 1] */
-#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
-#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)
-
-/* modulo inc/dec, bound = 2^k */
-#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
-#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))
-
-/* modulo add/sub - assumes x, y E [0, bound - 1] */
-#define MODADD(x, y, bound) \
- MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
-#define MODSUB(x, y, bound) \
- MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))
-
-/* module add/sub, bound = 2^k */
-#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
-#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))
-
-/* crc defines */
-#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */
-#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */
-#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */
-#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */
-#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
-#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
-
-/* bcm_format_flags() bit description structure */
-typedef struct bcm_bit_desc {
- uint32 bit;
- const char* name;
-} bcm_bit_desc_t;
-
-/* tag_ID/length/value_buffer tuple */
-typedef struct bcm_tlv {
- uint8 id;
- uint8 len;
- uint8 data[1];
-} bcm_tlv_t;
-
-/* Check that bcm_tlv_t fits into the given buflen */
-#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
-
-/* buffer length for ethernet address from bcm_ether_ntoa() */
-#define ETHER_ADDR_STR_LEN 18 /* 18-bytes of Ethernet address buffer length */
-
-/* unaligned load and store macros */
-#ifdef IL_BIGENDIAN
-static INLINE uint32
-load32_ua(uint8 *a)
-{
- return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
-}
-
-static INLINE void
-store32_ua(uint8 *a, uint32 v)
-{
- a[0] = (v >> 24) & 0xff;
- a[1] = (v >> 16) & 0xff;
- a[2] = (v >> 8) & 0xff;
- a[3] = v & 0xff;
-}
-
-static INLINE uint16
-load16_ua(uint8 *a)
-{
- return ((a[0] << 8) | a[1]);
-}
-
-static INLINE void
-store16_ua(uint8 *a, uint16 v)
-{
- a[0] = (v >> 8) & 0xff;
- a[1] = v & 0xff;
-}
-
-#else /* IL_BIGENDIAN */
-
-static INLINE uint32
-load32_ua(uint8 *a)
-{
- return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
-}
-
-static INLINE void
-store32_ua(uint8 *a, uint32 v)
-{
- a[3] = (v >> 24) & 0xff;
- a[2] = (v >> 16) & 0xff;
- a[1] = (v >> 8) & 0xff;
- a[0] = v & 0xff;
-}
-
-static INLINE uint16
-load16_ua(uint8 *a)
-{
- return ((a[1] << 8) | a[0]);
-}
-
-static INLINE void
-store16_ua(uint8 *a, uint16 v)
-{
- a[1] = (v >> 8) & 0xff;
- a[0] = v & 0xff;
-}
-
-#endif /* IL_BIGENDIAN */
-
-/* externs */
-/* crc */
-extern uint8 BCMROMFN(hndcrc8)(uint8 *p, uint nbytes, uint8 crc);
-extern uint16 BCMROMFN(hndcrc16)(uint8 *p, uint nbytes, uint16 crc);
-extern uint32 BCMROMFN(hndcrc32)(uint8 *p, uint nbytes, uint32 crc);
-/* format/print */
-extern char *bcm_brev_str(uint16 brev, char *buf);
-extern void printfbig(char *buf);
-
-/* IE parsing */
-extern bcm_tlv_t *BCMROMFN(bcm_next_tlv)(bcm_tlv_t *elt, int *buflen);
-extern bcm_tlv_t *BCMROMFN(bcm_parse_tlvs)(void *buf, int buflen, uint key);
-extern bcm_tlv_t *BCMROMFN(bcm_parse_ordered_tlvs)(void *buf, int buflen, uint key);
-
-/* bcmerror */
-extern const char *bcmerrorstr(int bcmerror);
-
-/* multi-bool data type: set of bools, mbool is true if any is set */
-typedef uint32 mbool;
-#define mboolset(mb, bit) ((mb) |= (bit)) /* set one bool */
-#define mboolclr(mb, bit) ((mb) &= ~(bit)) /* clear one bool */
-#define mboolisset(mb, bit) (((mb) & (bit)) != 0) /* TRUE if one bool is set */
-#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val)))
-
-/* power conversion */
-extern uint16 BCMROMFN(bcm_qdbm_to_mw)(uint8 qdbm);
-extern uint8 BCMROMFN(bcm_mw_to_qdbm)(uint16 mw);
-
-/* generic datastruct to help dump routines */
-struct fielddesc {
- const char *nameandfmt;
- uint32 offset;
- uint32 len;
-};
-
-extern void bcm_binit(struct bcmstrbuf *b, char *buf, uint size);
-extern int bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...);
-
-typedef uint32 (*readreg_rtn)(void *arg0, void *arg1, uint32 offset);
-extern uint bcmdumpfields(readreg_rtn func_ptr, void *arg0, void *arg1, struct fielddesc *str,
- char *buf, uint32 bufsize);
-
-extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len);
-extern uint BCMROMFN(bcm_bitcount)(uint8 *bitmap, uint bytelength);
-
-#ifdef BCMDBG_PKT /* pkt logging for debugging */
-#define PKTLIST_SIZE 1000
-typedef struct {
- void *list[PKTLIST_SIZE]; /* List of pointers to packets */
- uint count; /* Total count of the packets */
-} pktlist_info_t;
-
-extern void pktlist_add(pktlist_info_t *pktlist, void *p);
-extern void pktlist_remove(pktlist_info_t *pktlist, void *p);
-extern char* pktlist_dump(pktlist_info_t *pktlist, char *buf);
-#endif /* BCMDBG_PKT */
-
-#endif /* _bcmutils_h_ */
+++ /dev/null
-/*
- * HND SiliconBackplane chipcommon support.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _hndchipc_h_
-#define _hndchipc_h_
-
-typedef void (*sb_serial_init_fn)(void *regs, uint irq, uint baud_base, uint reg_shift);
-
-extern void sb_serial_init(sb_t *sbh, sb_serial_init_fn add);
-
-extern void *sb_jtagm_init(sb_t *sbh, uint clkd, bool exttap);
-extern void sb_jtagm_disable(osl_t *osh, void *h);
-extern uint32 jtag_rwreg(osl_t *osh, void *h, uint32 ir, uint32 dr);
-
-typedef void (*cc_isr_fn)(void* cbdata, uint32 ccintst);
-
-extern bool sb_cc_register_isr(sb_t *sbh, cc_isr_fn isr, uint32 ccintmask, void *cbdata);
-extern void sb_cc_isr(sb_t *sbh, chipcregs_t *regs);
-
-#endif /* _hndchipc_h_ */
+++ /dev/null
-/*
- * HND SiliconBackplane MIPS/ARM cores software interface.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _hndcpu_h_
-#define _hndcpu_h_
-
-#if defined(mips)
-#include <hndmips.h>
-#elif defined(__arm__) || defined(__thumb__) || defined(__thumb2__)
-#include <hndarm.h>
-#endif
-
-extern uint sb_irq(sb_t *sbh);
-extern uint32 sb_cpu_clock(sb_t *sbh);
-extern void hnd_cpu_wait(sb_t *sbh);
-extern void hnd_cpu_jumpto(void *addr);
-extern void hnd_cpu_reset(sb_t *sbh);
-
-#endif /* _hndcpu_h_ */
+++ /dev/null
-/*
- * HND SiliconBackplane MIPS core software interface.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _hndmips_h_
-#define _hndmips_h_
-
-extern void sb_mips_init(sb_t *sbh, uint shirq_map_base);
-extern bool sb_mips_setclock(sb_t *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock);
-extern void enable_pfc(uint32 mode);
-extern uint32 sb_memc_get_ncdl(sb_t *sbh);
-
-#if defined(BCMPERFSTATS)
-/* enable counting - exclusive version. Only one set of counters allowed at a time */
-extern void hndmips_perf_cyclecount_enable(void);
-extern void hndmips_perf_instrcount_enable(void);
-extern void hndmips_perf_icachecount_enable(void);
-extern void hndmips_perf_dcachecount_enable(void);
-/* start and stop counting */
-#define hndmips_perf_start01() \
- MTC0(C0_PERFORMANCE, 4, MFC0(C0_PERFORMANCE, 4) | 0x80008000)
-#define hndmips_perf_stop01() \
- MTC0(C0_PERFORMANCE, 4, MFC0(C0_PERFORMANCE, 4) & ~0x80008000)
-/* retrieve coutners - counters *decrement* */
-#define hndmips_perf_read0() -(long)(MFC0(C0_PERFORMANCE, 0))
-#define hndmips_perf_read1() -(long)(MFC0(C0_PERFORMANCE, 1))
-#define hndmips_perf_read2() -(long)(MFC0(C0_PERFORMANCE, 2))
-/* enable counting - modular version. Each counters can be enabled separately. */
-extern void hndmips_perf_icache_hit_enable(void);
-extern void hndmips_perf_icache_miss_enable(void);
-extern uint32 hndmips_perf_read_instrcount(void);
-extern uint32 hndmips_perf_read_cache_miss(void);
-extern uint32 hndmips_perf_read_cache_hit(void);
-#endif
-
-#endif /* _hndmips_h_ */
+++ /dev/null
-/*
- * HND SiliconBackplane PCI core software interface.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#ifndef _hndpci_h_
-#define _hndpci_h_
-
-extern int sbpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
- int len);
-extern int extpci_read_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
- int len);
-extern int sbpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
- int len);
-extern int extpci_write_config(sb_t *sbh, uint bus, uint dev, uint func, uint off, void *buf,
- int len);
-extern void sbpci_ban(uint16 core);
-extern int sbpci_init(sb_t *sbh);
-extern int sbpci_init_pci(sb_t *sbh);
-extern void sbpci_init_cores(sb_t *sbh);
-extern void sbpci_arb_park(sb_t *sbh, uint parkid);
-
-#define PCI_PARK_NVRAM 0xff
-
-#endif /* _hndpci_h_ */
+++ /dev/null
-/*
- * HND SiliconBackplane PMU support.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _hndpmu_h_
-#define _hndpmu_h_
-
-#define SET_LDO_VOLTAGE_LDO1 1
-#define SET_LDO_VOLTAGE_LDO2 2
-#define SET_LDO_VOLTAGE_LDO3 3
-#define SET_LDO_VOLTAGE_PAREF 4
-
-extern void sb_pmu_init(sb_t *sbh, osl_t *osh);
-extern void sb_pmu_pll_init(sb_t *sbh, osl_t *osh, uint32 xtalfreq);
-extern void sb_pmu_res_init(sb_t *sbh, osl_t *osh);
-extern uint32 sb_pmu_force_ilp(sb_t *sbh, osl_t *osh, bool force);
-extern uint32 sb_pmu_cpu_clock(sb_t *sbh, osl_t *osh);
-extern uint32 sb_pmu_alp_clock(sb_t *sbh, osl_t *osh);
-
-extern void sb_pmu_set_switcher_voltage(sb_t *sbh, osl_t *osh, uint8 bb_voltage, uint8 rf_voltage);
-extern void sb_pmu_set_ldo_voltage(sb_t *sbh, osl_t *osh, uint8 ldo, uint8 voltage);
-extern void sb_pmu_paref_ldo_enable(sb_t *sbh, osl_t *osh, bool enable);
-extern uint16 sb_pmu_fast_pwrup_delay(sb_t *sbh, osl_t *osh);
-extern void sb_pmu_otp_power(sb_t *sbh, osl_t *osh, bool on);
-extern void sb_pmu_rcal(sb_t *sbh, osl_t *osh);
-
-#endif /* _hndpmu_h_ */
+++ /dev/null
-/*
- * Linux Broadcom BCM47xx GPIO char driver
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _linux_gpio_h_
-#define _linux_gpio_h_
-
-struct gpio_ioctl {
- uint32 mask;
- uint32 val;
-};
-
-#define GPIO_IOC_MAGIC 'G'
-
-/* reserve/release a gpio to the caller */
-#define GPIO_IOC_RESERVE _IOWR(GPIO_IOC_MAGIC, 1, struct gpio_ioctl)
-#define GPIO_IOC_RELEASE _IOWR(GPIO_IOC_MAGIC, 2, struct gpio_ioctl)
-/* ioctls to read/write the gpio registers */
-#define GPIO_IOC_OUT _IOWR(GPIO_IOC_MAGIC, 3, struct gpio_ioctl)
-#define GPIO_IOC_IN _IOWR(GPIO_IOC_MAGIC, 4, struct gpio_ioctl)
-#define GPIO_IOC_OUTEN _IOWR(GPIO_IOC_MAGIC, 5, struct gpio_ioctl)
-
-#endif /* _linux_gpio_h_ */
+++ /dev/null
-/*
- * Linux-specific abstractions to gain some independence from linux kernel versions.
- * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _linuxver_h_
-#define _linuxver_h_
-
-#include <linux/version.h>
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
-#include <linux/config.h>
-#else
-#include <linux/autoconf.h>
-#endif
-#include <linux/module.h>
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0))
-/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
-#ifdef __UNDEF_NO_VERSION__
-#undef __NO_VERSION__
-#else
-#define __NO_VERSION__
-#endif
-#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0) */
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0)
-#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i")
-#define module_param_string(_name_, _string_, _size_, _perm_) \
- MODULE_PARM(_string_, "c" __MODULE_STRING(_size_))
-#endif
-
-/* linux/malloc.h is deprecated, use linux/slab.h instead. */
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 9))
-#include <linux/malloc.h>
-#else
-#include <linux/slab.h>
-#endif
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <asm/io.h>
-
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41))
-#include <linux/workqueue.h>
-#else
-#include <linux/tqueue.h>
-#ifndef work_struct
-#define work_struct tq_struct
-#endif
-#ifndef INIT_WORK
-#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data))
-#endif
-#ifndef schedule_work
-#define schedule_work(_work) schedule_task((_work))
-#endif
-#ifndef flush_scheduled_work
-#define flush_scheduled_work() flush_scheduled_tasks()
-#endif
-#endif /* LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41) */
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
-#define MY_INIT_WORK(_work, _func, _data) INIT_WORK(_work, _func)
-#else
-#define MY_INIT_WORK(_work, _func, _data) INIT_WORK(_work, _func, _data)
-typedef void (*work_func_t)(void *work);
-#endif /* < 2.6.20 */
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
-/* Some distributions have their own 2.6.x compatibility layers */
-#ifndef IRQ_NONE
-typedef void irqreturn_t;
-#define IRQ_NONE
-#define IRQ_HANDLED
-#define IRQ_RETVAL(x)
-#endif
-#else
-typedef irqreturn_t(*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs);
-#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0) */
-
-#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
-
-#include <pcmcia/version.h>
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 69))
-/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which
- * does this, but it's not in 2.4 so we do our own for now.
- */
-static inline void
-cs_error(client_handle_t handle, int func, int ret)
-{
- error_info_t err = { func, ret };
- CardServices(ReportError, handle, &err);
-}
-#endif
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 15))
-
-typedef struct pcmcia_device dev_link_t;
-
-#endif
-
-#endif /* CONFIG_PCMCIA */
-
-#ifndef __exit
-#define __exit
-#endif
-#ifndef __devexit
-#define __devexit
-#endif
-#ifndef __devinit
-#define __devinit __init
-#endif
-#ifndef __devinitdata
-#define __devinitdata
-#endif
-#ifndef __devexit_p
-#define __devexit_p(x) x
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 0))
-
-#define pci_get_drvdata(dev) (dev)->sysdata
-#define pci_set_drvdata(dev, value) (dev)->sysdata = (value)
-
-/*
- * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
- */
-
-struct pci_device_id {
- unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
- unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
- unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
- unsigned long driver_data; /* Data private to the driver */
-};
-
-struct pci_driver {
- struct list_head node;
- char *name;
- const struct pci_device_id *id_table; /* NULL if wants all devices */
- int (*probe)(struct pci_dev *dev,
- const struct pci_device_id *id); /* New device inserted */
- void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug
- * capable driver)
- */
- void (*suspend)(struct pci_dev *dev); /* Device suspended */
- void (*resume)(struct pci_dev *dev); /* Device woken up */
-};
-
-#define MODULE_DEVICE_TABLE(type, name)
-#define PCI_ANY_ID (~0)
-
-/* compatpci.c */
-#define pci_module_init pci_register_driver
-extern int pci_register_driver(struct pci_driver *drv);
-extern void pci_unregister_driver(struct pci_driver *drv);
-
-#endif /* PCI registration */
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18))
-#ifdef MODULE
-#define module_init(x) int init_module(void) { return x(); }
-#define module_exit(x) void cleanup_module(void) { x(); }
-#else
-#define module_init(x) __initcall(x);
-#define module_exit(x) __exitcall(x);
-#endif
-#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18) */
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 48))
-#define list_for_each(pos, head) \
- for (pos = (head)->next; pos != (head); pos = pos->next)
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 13))
-#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)])
-#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 44))
-#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 23))
-#define pci_enable_device(dev) do { } while (0)
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 14))
-#define net_device device
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 42))
-
-/*
- * DMA mapping
- *
- * See linux/Documentation/DMA-mapping.txt
- */
-
-#ifndef PCI_DMA_TODEVICE
-#define PCI_DMA_TODEVICE 1
-#define PCI_DMA_FROMDEVICE 2
-#endif
-
-typedef u32 dma_addr_t;
-
-/* Pure 2^n version of get_order */
-static inline int get_order(unsigned long size)
-{
- int order;
-
- size = (size-1) >> (PAGE_SHIFT-1);
- order = -1;
- do {
- size >>= 1;
- order++;
- } while (size);
- return order;
-}
-
-static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
- dma_addr_t *dma_handle)
-{
- void *ret;
- int gfp = GFP_ATOMIC | GFP_DMA;
-
- ret = (void *)__get_free_pages(gfp, get_order(size));
-
- if (ret != NULL) {
- memset(ret, 0, size);
- *dma_handle = virt_to_bus(ret);
- }
- return ret;
-}
-static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
-{
- free_pages((unsigned long)vaddr, get_order(size));
-}
-#ifdef ILSIM
-extern uint pci_map_single(void *dev, void *va, uint size, int direction);
-extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
-#else
-#define pci_map_single(cookie, address, size, dir) virt_to_bus(address)
-#define pci_unmap_single(cookie, address, size, dir)
-#endif
-
-#endif /* DMA mapping */
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 43))
-
-#define dev_kfree_skb_any(a) dev_kfree_skb(a)
-#define netif_down(dev) do { (dev)->start = 0; } while (0)
-
-/* pcmcia-cs provides its own netdevice compatibility layer */
-#ifndef _COMPAT_NETDEVICE_H
-
-/*
- * SoftNet
- *
- * For pre-softnet kernels we need to tell the upper layer not to
- * re-enter start_xmit() while we are in there. However softnet
- * guarantees not to enter while we are in there so there is no need
- * to do the netif_stop_queue() dance unless the transmit queue really
- * gets stuck. This should also improve performance according to tests
- * done by Aman Singla.
- */
-
-#define dev_kfree_skb_irq(a) dev_kfree_skb(a)
-#define netif_wake_queue(dev) \
- do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while (0)
-#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy)
-
-static inline void netif_start_queue(struct net_device *dev)
-{
- dev->tbusy = 0;
- dev->interrupt = 0;
- dev->start = 1;
-}
-
-#define netif_queue_stopped(dev) (dev)->tbusy
-#define netif_running(dev) (dev)->start
-
-#endif /* _COMPAT_NETDEVICE_H */
-
-#define netif_device_attach(dev) netif_start_queue(dev)
-#define netif_device_detach(dev) netif_stop_queue(dev)
-
-/* 2.4.x renamed bottom halves to tasklets */
-#define tasklet_struct tq_struct
-static inline void tasklet_schedule(struct tasklet_struct *tasklet)
-{
- queue_task(tasklet, &tq_immediate);
- mark_bh(IMMEDIATE_BH);
-}
-
-static inline void tasklet_init(struct tasklet_struct *tasklet,
- void (*func)(unsigned long),
- unsigned long data)
-{
- tasklet->next = NULL;
- tasklet->sync = 0;
- tasklet->routine = (void (*)(void *))func;
- tasklet->data = (void *)data;
-}
-#define tasklet_kill(tasklet) { do{} while (0); }
-
-/* 2.4.x introduced del_timer_sync() */
-#define del_timer_sync(timer) del_timer(timer)
-
-#else
-
-#define netif_down(dev)
-
-#endif /* SoftNet */
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3))
-
-/*
- * Emit code to initialise a tq_struct's routine and data pointers
- */
-#define PREPARE_TQUEUE(_tq, _routine, _data) \
- do { \
- (_tq)->routine = _routine; \
- (_tq)->data = _data; \
- } while (0)
-
-/*
- * Emit code to initialise all of a tq_struct
- */
-#define INIT_TQUEUE(_tq, _routine, _data) \
- do { \
- INIT_LIST_HEAD(&(_tq)->list); \
- (_tq)->sync = 0; \
- PREPARE_TQUEUE((_tq), (_routine), (_data)); \
- } while (0)
-
-#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3) */
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 6))
-
-/* Power management related routines */
-
-static inline int
-pci_save_state(struct pci_dev *dev, u32 *buffer)
-{
- int i;
- if (buffer) {
- for (i = 0; i < 16; i++)
- pci_read_config_dword(dev, i * 4, &buffer[i]);
- }
- return 0;
-}
-
-static inline int
-pci_restore_state(struct pci_dev *dev, u32 *buffer)
-{
- int i;
-
- if (buffer) {
- for (i = 0; i < 16; i++)
- pci_write_config_dword(dev, i * 4, buffer[i]);
- }
- /*
- * otherwise, write the context information we know from bootup.
- * This works around a problem where warm-booting from Windows
- * combined with a D3(hot)->D0 transition causes PCI config
- * header data to be forgotten.
- */
- else {
- for (i = 0; i < 6; i ++)
- pci_write_config_dword(dev,
- PCI_BASE_ADDRESS_0 + (i * 4),
- pci_resource_start(dev, i));
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
- return 0;
-}
-
-#endif /* PCI power management */
-
-/* Old cp0 access macros deprecated in 2.4.19 */
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 19))
-#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
-#endif
-
-/* Module refcount handled internally in 2.6.x */
-#ifndef SET_MODULE_OWNER
-#define SET_MODULE_OWNER(dev) do {} while (0)
-#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
-#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
-#else
-#define OLD_MOD_INC_USE_COUNT do {} while (0)
-#define OLD_MOD_DEC_USE_COUNT do {} while (0)
-#endif
-
-#ifndef SET_NETDEV_DEV
-#define SET_NETDEV_DEV(net, pdev) do {} while (0)
-#endif
-
-#ifndef HAVE_FREE_NETDEV
-#define free_netdev(dev) kfree(dev)
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
-/* struct packet_type redefined in 2.6.x */
-#define af_packet_priv data
-#endif
-
-/* suspend args */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
-#define DRV_SUSPEND_STATE_TYPE pm_message_t
-#else
-#define DRV_SUSPEND_STATE_TYPE uint32
-#endif
-
-#endif /* _linuxver_h_ */
+++ /dev/null
-/*
- * HND Run Time Environment for standalone MIPS programs.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _MISPINC_H
-#define _MISPINC_H
-
-
-/* MIPS defines */
-
-#ifdef _LANGUAGE_ASSEMBLY
-
-/*
- * Symbolic register names for 32 bit ABI
- */
-#define zero $0 /* wired zero */
-#define AT $1 /* assembler temp - uppercase because of ".set at" */
-#define v0 $2 /* return value */
-#define v1 $3
-#define a0 $4 /* argument registers */
-#define a1 $5
-#define a2 $6
-#define a3 $7
-#define t0 $8 /* caller saved */
-#define t1 $9
-#define t2 $10
-#define t3 $11
-#define t4 $12
-#define t5 $13
-#define t6 $14
-#define t7 $15
-#define s0 $16 /* callee saved */
-#define s1 $17
-#define s2 $18
-#define s3 $19
-#define s4 $20
-#define s5 $21
-#define s6 $22
-#define s7 $23
-#define t8 $24 /* caller saved */
-#define t9 $25
-#define jp $25 /* PIC jump register */
-#define k0 $26 /* kernel scratch */
-#define k1 $27
-#define gp $28 /* global pointer */
-#define sp $29 /* stack pointer */
-#define fp $30 /* frame pointer */
-#define s8 $30 /* same like fp! */
-#define ra $31 /* return address */
-
-
-/* CP0 Registers */
-
-#define C0_INX $0
-#define C0_RAND $1
-#define C0_TLBLO0 $2
-#define C0_TLBLO C0_TLBLO0
-#define C0_TLBLO1 $3
-#define C0_CTEXT $4
-#define C0_PGMASK $5
-#define C0_WIRED $6
-#define C0_INFO $7
-#define C0_BADVADDR $8
-#define C0_COUNT $9
-#define C0_TLBHI $10
-#define C0_COMPARE $11
-#define C0_SR $12
-#define C0_STATUS C0_SR
-#define C0_CAUSE $13
-#define C0_EPC $14
-#define C0_PRID $15
-#define C0_CONFIG $16
-#define C0_LLADDR $17
-#define C0_WATCHLO $18
-#define C0_WATCHHI $19
-#define C0_XCTEXT $20
-#define C0_DIAGNOSTIC $22
-#define C0_BROADCOM C0_DIAGNOSTIC
-#define C0_PERFORMANCE $25
-#define C0_ECC $26
-#define C0_CACHEERR $27
-#define C0_TAGLO $28
-#define C0_TAGHI $29
-#define C0_ERREPC $30
-#define C0_DESAVE $31
-
-/*
- * LEAF - declare leaf routine
- */
-#define LEAF(symbol) \
- .globl symbol; \
- .align 2; \
- .type symbol, @function; \
- .ent symbol, 0; \
-symbol: .frame sp, 0, ra
-
-/*
- * END - mark end of function
- */
-#define END(function) \
- .end function; \
- .size function, . - function
-
-#define _ULCAST_
-
-#define MFC0_SEL(dst, src, sel) \
- .word\t(0x40000000 | ((dst) << 16) | ((src) << 11) | (sel))
-
-
-#define MTC0_SEL(dst, src, sel) \
- .word\t(0x40800000 | ((dst) << 16) | ((src) << 11) | (sel))
-
-#else
-
-/*
- * The following macros are especially useful for __asm__
- * inline assembler.
- */
-#ifndef __STR
-#define __STR(x) #x
-#endif
-#ifndef STR
-#define STR(x) __STR(x)
-#endif
-
-#define _ULCAST_ (unsigned long)
-
-
-/* CP0 Registers */
-
-#define C0_INX 0 /* CP0: TLB Index */
-#define C0_RAND 1 /* CP0: TLB Random */
-#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */
-#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */
-#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */
-#define C0_CTEXT 4 /* CP0: Context */
-#define C0_PGMASK 5 /* CP0: TLB PageMask */
-#define C0_WIRED 6 /* CP0: TLB Wired */
-#define C0_INFO 7 /* CP0: Info */
-#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */
-#define C0_COUNT 9 /* CP0: Count */
-#define C0_TLBHI 10 /* CP0: TLB EntryHi */
-#define C0_COMPARE 11 /* CP0: Compare */
-#define C0_SR 12 /* CP0: Processor Status */
-#define C0_STATUS C0_SR /* CP0: Processor Status */
-#define C0_CAUSE 13 /* CP0: Exception Cause */
-#define C0_EPC 14 /* CP0: Exception PC */
-#define C0_PRID 15 /* CP0: Processor Revision Indentifier */
-#define C0_CONFIG 16 /* CP0: Config */
-#define C0_LLADDR 17 /* CP0: LLAddr */
-#define C0_WATCHLO 18 /* CP0: WatchpointLo */
-#define C0_WATCHHI 19 /* CP0: WatchpointHi */
-#define C0_XCTEXT 20 /* CP0: XContext */
-#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */
-#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */
-#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */
-#define C0_ECC 26 /* CP0: ECC */
-#define C0_CACHEERR 27 /* CP0: CacheErr */
-#define C0_TAGLO 28 /* CP0: TagLo */
-#define C0_TAGHI 29 /* CP0: TagHi */
-#define C0_ERREPC 30 /* CP0: ErrorEPC */
-#define C0_DESAVE 31 /* CP0: DebugSave */
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-/*
- * Memory segments (32bit kernel mode addresses)
- */
-#undef KUSEG
-#undef KSEG0
-#undef KSEG1
-#undef KSEG2
-#undef KSEG3
-#define KUSEG 0x00000000
-#define KSEG0 0x80000000
-#define KSEG1 0xa0000000
-#define KSEG2 0xc0000000
-#define KSEG3 0xe0000000
-#define PHYSADDR_MASK 0x1fffffff
-
-/*
- * Map an address to a certain kernel segment
- */
-#undef PHYSADDR
-#undef KSEG0ADDR
-#undef KSEG1ADDR
-#undef KSEG2ADDR
-#undef KSEG3ADDR
-
-#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK)
-#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0)
-#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1)
-#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2)
-#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3)
-
-
-#ifndef Index_Invalidate_I
-/*
- * Cache Operations
- */
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-#define Index_Invalidate_SI 0x02
-#define Index_Writeback_Inv_SD 0x03
-#define Index_Load_Tag_I 0x04
-#define Index_Load_Tag_D 0x05
-#define Index_Load_Tag_SI 0x06
-#define Index_Load_Tag_SD 0x07
-#define Index_Store_Tag_I 0x08
-#define Index_Store_Tag_D 0x09
-#define Index_Store_Tag_SI 0x0A
-#define Index_Store_Tag_SD 0x0B
-#define Create_Dirty_Excl_D 0x0d
-#define Create_Dirty_Excl_SD 0x0f
-#define Hit_Invalidate_I 0x10
-#define Hit_Invalidate_D 0x11
-#define Hit_Invalidate_SI 0x12
-#define Hit_Invalidate_SD 0x13
-#define Fill_I 0x14
-#define Hit_Writeback_Inv_D 0x15
- /* 0x16 is unused */
-#define Hit_Writeback_Inv_SD 0x17
-#define R5K_Page_Invalidate_S 0x17
-#define Hit_Writeback_I 0x18
-#define Hit_Writeback_D 0x19
- /* 0x1a is unused */
-#define Hit_Writeback_SD 0x1b
- /* 0x1c is unused */
- /* 0x1e is unused */
-#define Hit_Set_Virtual_SI 0x1e
-#define Hit_Set_Virtual_SD 0x1f
-#endif /* !Index_Invalidate_I */
-
-
-/*
- * R4x00 interrupt enable / cause bits
- */
-#define IE_SW0 (_ULCAST_(1) << 8)
-#define IE_SW1 (_ULCAST_(1) << 9)
-#define IE_IRQ0 (_ULCAST_(1) << 10)
-#define IE_IRQ1 (_ULCAST_(1) << 11)
-#define IE_IRQ2 (_ULCAST_(1) << 12)
-#define IE_IRQ3 (_ULCAST_(1) << 13)
-#define IE_IRQ4 (_ULCAST_(1) << 14)
-#define IE_IRQ5 (_ULCAST_(1) << 15)
-
-#ifndef ST0_UM
-/*
- * Bitfields in the mips32 cp0 status register
- */
-#define ST0_IE 0x00000001
-#define ST0_EXL 0x00000002
-#define ST0_ERL 0x00000004
-#define ST0_UM 0x00000010
-#define ST0_SWINT0 0x00000100
-#define ST0_SWINT1 0x00000200
-#define ST0_HWINT0 0x00000400
-#define ST0_HWINT1 0x00000800
-#define ST0_HWINT2 0x00001000
-#define ST0_HWINT3 0x00002000
-#define ST0_HWINT4 0x00004000
-#define ST0_HWINT5 0x00008000
-#define ST0_IM 0x0000ff00
-#define ST0_NMI 0x00080000
-#define ST0_SR 0x00100000
-#define ST0_TS 0x00200000
-#define ST0_BEV 0x00400000
-#define ST0_RE 0x02000000
-#define ST0_RP 0x08000000
-#define ST0_CU 0xf0000000
-#define ST0_CU0 0x10000000
-#define ST0_CU1 0x20000000
-#define ST0_CU2 0x40000000
-#define ST0_CU3 0x80000000
-#endif /* !ST0_UM */
-
-
-/*
- * Bitfields in the mips32 cp0 cause register
- */
-#define C_EXC 0x0000007c
-#define C_EXC_SHIFT 2
-#define C_INT 0x0000ff00
-#define C_INT_SHIFT 8
-#define C_SW0 (_ULCAST_(1) << 8)
-#define C_SW1 (_ULCAST_(1) << 9)
-#define C_IRQ0 (_ULCAST_(1) << 10)
-#define C_IRQ1 (_ULCAST_(1) << 11)
-#define C_IRQ2 (_ULCAST_(1) << 12)
-#define C_IRQ3 (_ULCAST_(1) << 13)
-#define C_IRQ4 (_ULCAST_(1) << 14)
-#define C_IRQ5 (_ULCAST_(1) << 15)
-#define C_WP 0x00400000
-#define C_IV 0x00800000
-#define C_CE 0x30000000
-#define C_CE_SHIFT 28
-#define C_BD 0x80000000
-
-/* Values in C_EXC */
-#define EXC_INT 0
-#define EXC_TLBM 1
-#define EXC_TLBL 2
-#define EXC_TLBS 3
-#define EXC_AEL 4
-#define EXC_AES 5
-#define EXC_IBE 6
-#define EXC_DBE 7
-#define EXC_SYS 8
-#define EXC_BPT 9
-#define EXC_RI 10
-#define EXC_CU 11
-#define EXC_OV 12
-#define EXC_TR 13
-#define EXC_WATCH 23
-#define EXC_MCHK 24
-
-
-/*
- * Bits in the cp0 config register.
- */
-#define CONF_CM_CACHABLE_NO_WA 0
-#define CONF_CM_CACHABLE_WA 1
-#define CONF_CM_UNCACHED 2
-#define CONF_CM_CACHABLE_NONCOHERENT 3
-#define CONF_CM_CACHABLE_CE 4
-#define CONF_CM_CACHABLE_COW 5
-#define CONF_CM_CACHABLE_CUW 6
-#define CONF_CM_CACHABLE_ACCELERATED 7
-#define CONF_CM_CMASK 7
-#define CONF_CU (_ULCAST_(1) << 3)
-#define CONF_DB (_ULCAST_(1) << 4)
-#define CONF_IB (_ULCAST_(1) << 5)
-#define CONF_SE (_ULCAST_(1) << 12)
-#ifndef CONF_BE /* duplicate in mipsregs.h */
-#define CONF_BE (_ULCAST_(1) << 15)
-#endif
-#define CONF_SC (_ULCAST_(1) << 17)
-#define CONF_AC (_ULCAST_(1) << 23)
-#define CONF_HALT (_ULCAST_(1) << 25)
-#ifndef CONF_M /* duplicate in mipsregs.h */
-#define CONF_M (_ULCAST_(1) << 31)
-#endif
-
-
-/*
- * Bits in the cp0 config register select 1.
- */
-#define CONF1_FP 0x00000001 /* FPU present */
-#define CONF1_EP 0x00000002 /* EJTAG present */
-#define CONF1_CA 0x00000004 /* mips16 implemented */
-#define CONF1_WR 0x00000008 /* Watch registers present */
-#define CONF1_PC 0x00000010 /* Performance counters present */
-#define CONF1_DA_SHIFT 7 /* D$ associativity */
-#define CONF1_DA_MASK 0x00000380
-#define CONF1_DA_BASE 1
-#define CONF1_DL_SHIFT 10 /* D$ line size */
-#define CONF1_DL_MASK 0x00001c00
-#define CONF1_DL_BASE 2
-#define CONF1_DS_SHIFT 13 /* D$ sets/way */
-#define CONF1_DS_MASK 0x0000e000
-#define CONF1_DS_BASE 64
-#define CONF1_IA_SHIFT 16 /* I$ associativity */
-#define CONF1_IA_MASK 0x00070000
-#define CONF1_IA_BASE 1
-#define CONF1_IL_SHIFT 19 /* I$ line size */
-#define CONF1_IL_MASK 0x00380000
-#define CONF1_IL_BASE 2
-#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
-#define CONF1_IS_MASK 0x01c00000
-#define CONF1_IS_BASE 64
-#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */
-#define CONF1_MS_SHIFT 25
-
-/* PRID register */
-#define PRID_COPT_MASK 0xff000000
-#define PRID_COMP_MASK 0x00ff0000
-#define PRID_IMP_MASK 0x0000ff00
-#define PRID_REV_MASK 0x000000ff
-
-#define PRID_COMP_LEGACY 0x000000
-#define PRID_COMP_MIPS 0x010000
-#define PRID_COMP_BROADCOM 0x020000
-#define PRID_COMP_ALCHEMY 0x030000
-#define PRID_COMP_SIBYTE 0x040000
-#define PRID_IMP_BCM4710 0x4000
-#define PRID_IMP_BCM3302 0x9000
-#define PRID_IMP_BCM3303 0x9100
-
-#define PRID_IMP_UNKNOWN 0xff00
-
-#define BCM330X(id) \
- (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \
- (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) || \
- ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \
- (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
-
-/* Bits in C0_BROADCOM */
-#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */
-#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */
-#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */
-#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */
-#define BRCM_CLF_ENABLE 0x00100000 /* Enable cache line first feature */
-
-/* PreFetch Cache aka Read Ahead Cache */
-
-#define PFC_CR0 0xff400000 /* control reg 0 */
-#define PFC_CR1 0xff400004 /* control reg 1 */
-
-/* PFC operations */
-#define PFC_I 0x00000001 /* Enable PFC use for instructions */
-#define PFC_D 0x00000002 /* Enable PFC use for data */
-#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */
-#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */
-#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */
-#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */
-#define PFC_DPF 0x00000040 /* Enable directional prefetching */
-#define PFC_FLUSH 0x00000100 /* Flush the PFC */
-#define PFC_BRR 0x40000000 /* Bus error indication */
-#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */
-
-/* Handy defaults */
-#define PFC_DISABLED 0
-#define PFC_AUTO 0xffffffff /* auto select the default mode */
-#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV)
-#define PFC_INST_NOPF (PFC_I | PFC_CINV)
-#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV)
-#define PFC_DATA_NOPF (PFC_D | PFC_CINV)
-#define PFC_I_AND_D (PFC_INST | PFC_DATA)
-#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF)
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-/*
- * Macros to access the system control coprocessor
- */
-
-#define MFC0(source, sel) \
-({ \
- int __res; \
- __asm__ __volatile__(" \
- .set\tnoreorder; \
- .set\tnoat; \
- .word\t"STR(0x40010000 | ((source) << 11) | (sel))"; \
- move\t%0, $1; \
- .set\tat; \
- .set\treorder" \
- :"=r" (__res) \
- : \
- :"$1"); \
- __res; \
-})
-
-#define MTC0(source, sel, value) \
-do { \
- __asm__ __volatile__(" \
- .set\tnoreorder; \
- .set\tnoat; \
- move\t$1, %z0; \
- .word\t"STR(0x40810000 | ((source) << 11) | (sel))"; \
- .set\tat; \
- .set\treorder" \
- : \
- :"jr" (value) \
- :"$1"); \
-} while (0)
-
-#define get_c0_count() \
-({ \
- int __res; \
- __asm__ __volatile__(" \
- .set\tnoreorder; \
- .set\tnoat; \
- mfc0\t%0, $9; \
- .set\tat; \
- .set\treorder" \
- :"=r" (__res)); \
- __res; \
-})
-
-static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize)
-{
- uint lsz, sets, ways;
-
- /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
- if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT)))
- lsz = CONF1_IL_BASE << lsz;
- sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT);
- ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT);
- *size = lsz * sets * ways;
- *lsize = lsz;
-}
-
-static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize)
-{
- uint lsz, sets, ways;
-
- /* Data Cache Size = Associativity * Line Size * Sets Per Way */
- if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT)))
- lsz = CONF1_DL_BASE << lsz;
- sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT);
- ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT);
- *size = lsz * sets * ways;
- *lsize = lsz;
-}
-
-#define cache_op(base, op) \
- __asm__ __volatile__(" \
- .set noreorder; \
- .set mips3; \
- cache %1, (%0); \
- .set mips0; \
- .set reorder" \
- : \
- : "r" (base), \
- "i" (op));
-
-#define cache_unroll4(base, delta, op) \
- __asm__ __volatile__(" \
- .set noreorder; \
- .set mips3; \
- cache %1, 0(%0); \
- cache %1, delta(%0); \
- cache %1, (2 * delta)(%0); \
- cache %1, (3 * delta)(%0); \
- .set mips0; \
- .set reorder" \
- : \
- : "r" (base), \
- "i" (op));
-
-#endif /* !_LANGUAGE_ASSEMBLY */
-
-#endif /* _MISPINC_H */
+++ /dev/null
-#ifndef __osl_h
-#define __osl_h
-
-#include <linux/delay.h>
-#include <typedefs.h>
-#include <linuxver.h>
-#include <pcicfg.h>
-
-#define ASSERT(n)
-
-#ifndef ABS
-#define ABS(a) (((a) < 0)?-(a):(a))
-#endif /* ABS */
-
-#ifndef MIN
-#define MIN(a, b) (((a) < (b))?(a):(b))
-#endif /* MIN */
-
-#ifndef MAX
-#define MAX(a, b) (((a) > (b))?(a):(b))
-#endif /* MAX */
-
-#define CEIL(x, y) (((x) + ((y)-1)) / (y))
-#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
-#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0)
-#define ISPOWEROF2(x) ((((x)-1)&(x)) == 0)
-#define VALID_MASK(mask) !((mask) & ((mask) + 1))
-#ifndef OFFSETOF
-#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member)
-#endif /* OFFSETOF */
-#ifndef ARRAYSIZE
-#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0]))
-#endif
-
-/*
- * Spin at most 'us' microseconds while 'exp' is true.
- * Caller should explicitly test 'exp' when this completes
- * and take appropriate error action if 'exp' is still true.
- */
-#define SPINWAIT(exp, us) { \
- uint countdown = (us) + 9; \
- while ((exp) && (countdown >= 10)) {\
- OSL_DELAY(10); \
- countdown -= 10; \
- } \
-}
-
-
-typedef void (*pktfree_cb_fn_t)(void *ctx, void *pkt, unsigned int status);
-/* Pkttag flag should be part of public information */
-typedef struct {
- bool pkttag;
- uint pktalloced; /* Number of allocated packet buffers */
- bool mmbus; /* Bus supports memory-mapped register accesses */
- pktfree_cb_fn_t tx_fn; /* Callback function for PKTFREE */
- void *tx_ctx; /* Context to the callback function */
-} osl_pubinfo_t;
-
-struct osl_info {
- osl_pubinfo_t pub;
- uint magic;
- void *pdev;
- uint malloced;
- uint failed;
- uint bustype;
- void *dbgmem_list;
-};
-
-typedef struct osl_info osl_t;
-
-#define PCI_CFG_RETRY 10
-
-/* map/unmap direction */
-#define DMA_TX 1 /* TX direction for DMA */
-#define DMA_RX 2 /* RX direction for DMA */
-
-#define AND_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) & (v))
-#define OR_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) | (v))
-#define SET_REG(osh, r, mask, val) W_REG((osh), (r), ((R_REG((osh), r) & ~(mask)) | (val)))
-
-/* bcopy, bcmp, and bzero */
-#define bcopy(src, dst, len) memcpy((dst), (src), (len))
-#define bcmp(b1, b2, len) memcmp((b1), (b2), (len))
-#define bzero(b, len) memset((b), '\0', (len))
-
-/* uncached virtual address */
-#ifdef mips
-#define OSL_UNCACHED(va) KSEG1ADDR((va))
-#include <asm/addrspace.h>
-#else
-#define OSL_UNCACHED(va) (va)
-#endif /* mips */
-
-
-#ifndef IL_BIGENDIAN
-#define R_REG(osh, r) (\
- sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \
- sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \
- readl((volatile uint32*)(r)) \
-)
-#define W_REG(osh, r, v) do { \
- switch (sizeof(*(r))) { \
- case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \
- case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \
- case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
- } \
-} while (0)
-#else /* IL_BIGENDIAN */
-#define R_REG(osh, r) ({ \
- __typeof(*(r)) __osl_v; \
- switch (sizeof(*(r))) { \
- case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \
- case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \
- case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \
- } \
- __osl_v; \
-})
-#define W_REG(osh, r, v) do { \
- switch (sizeof(*(r))) { \
- case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \
- case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \
- case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
- } \
-} while (0)
-#endif /* IL_BIGENDIAN */
-
-/* dereference an address that may cause a bus exception */
-#define BUSPROBE(val, addr) get_dbe((val), (addr))
-#include <asm/paccess.h>
-
-/* map/unmap physical to virtual I/O */
-#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
-#define REG_UNMAP(va) iounmap((void *)(va))
-
-/* shared (dma-able) memory access macros */
-#define R_SM(r) *(r)
-#define W_SM(r, v) (*(r) = (v))
-#define BZERO_SM(r, len) memset((r), '\0', (len))
-
-#define MALLOC(osh, size) kmalloc((size), GFP_ATOMIC)
-#define MFREE(osh, addr, size) kfree((addr))
-#define MALLOCED(osh) (0)
-
-#define OSL_DELAY _osl_delay
-static inline void _osl_delay(uint usec)
-{
- uint d;
-
- while (usec > 0) {
- d = MIN(usec, 1000);
- udelay(d);
- usec -= d;
- }
-}
-
-static inline void
-bcm_mdelay(uint ms)
-{
- uint i;
-
- for (i = 0; i < ms; i++) {
- OSL_DELAY(1000);
- }
-}
-
-
-#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size)
-#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size)
-
-#define OSL_PCI_READ_CONFIG(osh, offset, size) \
- _osl_pci_read_config((osh), (offset), (size))
-
-static inline uint32
-_osl_pci_read_config(osl_t *osh, uint offset, uint size)
-{
- uint val;
- uint retry = PCI_CFG_RETRY;
-
- do {
- pci_read_config_dword(osh->pdev, offset, &val);
- if (val != 0xffffffff)
- break;
- } while (retry--);
-
- return (val);
-}
-
-#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \
- _osl_pci_write_config((osh), (offset), (size), (val))
-static inline void
-_osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val)
-{
- uint retry = PCI_CFG_RETRY;
-
- do {
- pci_write_config_dword(osh->pdev, offset, val);
- if (offset != PCI_BAR0_WIN)
- break;
- if (_osl_pci_read_config(osh, offset, size) == val)
- break;
- } while (retry--);
-}
-
-
-/* return bus # for the pci device pointed by osh->pdev */
-#define OSL_PCI_BUS(osh) _osl_pci_bus(osh)
-static inline uint
-_osl_pci_bus(osl_t *osh)
-{
- return ((struct pci_dev *)osh->pdev)->bus->number;
-}
-
-/* return slot # for the pci device pointed by osh->pdev */
-#define OSL_PCI_SLOT(osh) _osl_pci_slot(osh)
-static inline uint
-_osl_pci_slot(osl_t *osh)
-{
- return PCI_SLOT(((struct pci_dev *)osh->pdev)->devfn);
-}
-
-#endif
+++ /dev/null
-/*
- * pcicfg.h: PCI configuration constants and structures.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _h_pcicfg_
-#define _h_pcicfg_
-
-/* The following inside ifndef's so we don't collide with NTDDK.H */
-#ifndef PCI_MAX_BUS
-#define PCI_MAX_BUS 0x100
-#endif
-#ifndef PCI_MAX_DEVICES
-#define PCI_MAX_DEVICES 0x20
-#endif
-#ifndef PCI_MAX_FUNCTION
-#define PCI_MAX_FUNCTION 0x8
-#endif
-
-#ifndef PCI_INVALID_VENDORID
-#define PCI_INVALID_VENDORID 0xffff
-#endif
-#ifndef PCI_INVALID_DEVICEID
-#define PCI_INVALID_DEVICEID 0xffff
-#endif
-
-
-/* Convert between bus-slot-function-register and config addresses */
-
-#define PCICFG_BUS_SHIFT 16 /* Bus shift */
-#define PCICFG_SLOT_SHIFT 11 /* Slot shift */
-#define PCICFG_FUN_SHIFT 8 /* Function shift */
-#define PCICFG_OFF_SHIFT 0 /* Register shift */
-
-#define PCICFG_BUS_MASK 0xff /* Bus mask */
-#define PCICFG_SLOT_MASK 0x1f /* Slot mask */
-#define PCICFG_FUN_MASK 7 /* Function mask */
-#define PCICFG_OFF_MASK 0xff /* Bus mask */
-
-#define PCI_CONFIG_ADDR(b, s, f, o) \
- ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \
- | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \
- | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \
- | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
-
-#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
-#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
-#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
-#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
-
-/* PCIE Config space accessing MACROS */
-
-#define PCIECFG_BUS_SHIFT 24 /* Bus shift */
-#define PCIECFG_SLOT_SHIFT 19 /* Slot/Device shift */
-#define PCIECFG_FUN_SHIFT 16 /* Function shift */
-#define PCIECFG_OFF_SHIFT 0 /* Register shift */
-
-#define PCIECFG_BUS_MASK 0xff /* Bus mask */
-#define PCIECFG_SLOT_MASK 0x1f /* Slot/Device mask */
-#define PCIECFG_FUN_MASK 7 /* Function mask */
-#define PCIECFG_OFF_MASK 0x3ff /* Register mask */
-
-#define PCIE_CONFIG_ADDR(b, s, f, o) \
- ((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT) \
- | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT) \
- | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT) \
- | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT))
-
-#define PCIE_CONFIG_BUS(a) (((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK)
-#define PCIE_CONFIG_SLOT(a) (((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK)
-#define PCIE_CONFIG_FUN(a) (((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK)
-#define PCIE_CONFIG_OFF(a) (((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK)
-
-/* The actual config space */
-
-#define PCI_BAR_MAX 6
-
-#define PCI_ROM_BAR 8
-
-#define PCR_RSVDA_MAX 2
-
-/* Bits in PCI bars' flags */
-
-#define PCIBAR_FLAGS 0xf
-#define PCIBAR_IO 0x1
-#define PCIBAR_MEM1M 0x2
-#define PCIBAR_MEM64 0x4
-#define PCIBAR_PREFETCH 0x8
-#define PCIBAR_MEM32_MASK 0xFFFFFF80
-
-/* pci config status reg has a bit to indicate that capability ptr is present */
-
-#define PCI_CAPPTR_PRESENT 0x0010
-
-typedef struct _pci_config_regs {
- unsigned short vendor;
- unsigned short device;
- unsigned short command;
- unsigned short status;
- unsigned char rev_id;
- unsigned char prog_if;
- unsigned char sub_class;
- unsigned char base_class;
- unsigned char cache_line_size;
- unsigned char latency_timer;
- unsigned char header_type;
- unsigned char bist;
- unsigned long base[PCI_BAR_MAX];
- unsigned long cardbus_cis;
- unsigned short subsys_vendor;
- unsigned short subsys_id;
- unsigned long baserom;
- unsigned long rsvd_a[PCR_RSVDA_MAX];
- unsigned char int_line;
- unsigned char int_pin;
- unsigned char min_gnt;
- unsigned char max_lat;
- unsigned char dev_dep[192];
-} pci_config_regs;
-
-#define SZPCR (sizeof (pci_config_regs))
-#define MINSZPCR 64 /* offsetof (dev_dep[0] */
-
-/* A structure for the config registers is nice, but in most
- * systems the config space is not memory mapped, so we need
- * filed offsetts. :-(
- */
-#define PCI_CFG_VID 0
-#define PCI_CFG_DID 2
-#define PCI_CFG_CMD 4
-#define PCI_CFG_STAT 6
-#define PCI_CFG_REV 8
-#define PCI_CFG_PROGIF 9
-#define PCI_CFG_SUBCL 0xa
-#define PCI_CFG_BASECL 0xb
-#define PCI_CFG_CLSZ 0xc
-#define PCI_CFG_LATTIM 0xd
-#define PCI_CFG_HDR 0xe
-#define PCI_CFG_BIST 0xf
-#define PCI_CFG_BAR0 0x10
-#define PCI_CFG_BAR1 0x14
-#define PCI_CFG_BAR2 0x18
-#define PCI_CFG_BAR3 0x1c
-#define PCI_CFG_BAR4 0x20
-#define PCI_CFG_BAR5 0x24
-#define PCI_CFG_CIS 0x28
-#define PCI_CFG_SVID 0x2c
-#define PCI_CFG_SSID 0x2e
-#define PCI_CFG_ROMBAR 0x30
-#define PCI_CFG_CAPPTR 0x34
-#define PCI_CFG_INT 0x3c
-#define PCI_CFG_PIN 0x3d
-#define PCI_CFG_MINGNT 0x3e
-#define PCI_CFG_MAXLAT 0x3f
-
-#ifdef __NetBSD__
-#undef PCI_CLASS_DISPLAY
-#undef PCI_CLASS_MEMORY
-#undef PCI_CLASS_BRIDGE
-#undef PCI_CLASS_INPUT
-#undef PCI_CLASS_DOCK
-#endif /* __NetBSD__ */
-
-#ifdef EFI
-#undef PCI_CLASS_BRIDGE
-#undef PCI_CLASS_OLD
-#undef PCI_CLASS_DISPLAY
-#undef PCI_CLASS_SERIAL
-#undef PCI_CLASS_SATELLITE
-#endif /* EFI */
-
-/* Classes and subclasses */
-
-typedef enum {
- PCI_CLASS_OLD = 0,
- PCI_CLASS_DASDI,
- PCI_CLASS_NET,
- PCI_CLASS_DISPLAY,
- PCI_CLASS_MMEDIA,
- PCI_CLASS_MEMORY,
- PCI_CLASS_BRIDGE,
- PCI_CLASS_COMM,
- PCI_CLASS_BASE,
- PCI_CLASS_INPUT,
- PCI_CLASS_DOCK,
- PCI_CLASS_CPU,
- PCI_CLASS_SERIAL,
- PCI_CLASS_INTELLIGENT = 0xe,
- PCI_CLASS_SATELLITE,
- PCI_CLASS_CRYPT,
- PCI_CLASS_DSP,
- PCI_CLASS_XOR = 0xfe
-} pci_classes;
-
-typedef enum {
- PCI_DASDI_SCSI,
- PCI_DASDI_IDE,
- PCI_DASDI_FLOPPY,
- PCI_DASDI_IPI,
- PCI_DASDI_RAID,
- PCI_DASDI_OTHER = 0x80
-} pci_dasdi_subclasses;
-
-typedef enum {
- PCI_NET_ETHER,
- PCI_NET_TOKEN,
- PCI_NET_FDDI,
- PCI_NET_ATM,
- PCI_NET_OTHER = 0x80
-} pci_net_subclasses;
-
-typedef enum {
- PCI_DISPLAY_VGA,
- PCI_DISPLAY_XGA,
- PCI_DISPLAY_3D,
- PCI_DISPLAY_OTHER = 0x80
-} pci_display_subclasses;
-
-typedef enum {
- PCI_MMEDIA_VIDEO,
- PCI_MMEDIA_AUDIO,
- PCI_MMEDIA_PHONE,
- PCI_MEDIA_OTHER = 0x80
-} pci_mmedia_subclasses;
-
-typedef enum {
- PCI_MEMORY_RAM,
- PCI_MEMORY_FLASH,
- PCI_MEMORY_OTHER = 0x80
-} pci_memory_subclasses;
-
-typedef enum {
- PCI_BRIDGE_HOST,
- PCI_BRIDGE_ISA,
- PCI_BRIDGE_EISA,
- PCI_BRIDGE_MC,
- PCI_BRIDGE_PCI,
- PCI_BRIDGE_PCMCIA,
- PCI_BRIDGE_NUBUS,
- PCI_BRIDGE_CARDBUS,
- PCI_BRIDGE_RACEWAY,
- PCI_BRIDGE_OTHER = 0x80
-} pci_bridge_subclasses;
-
-typedef enum {
- PCI_COMM_UART,
- PCI_COMM_PARALLEL,
- PCI_COMM_MULTIUART,
- PCI_COMM_MODEM,
- PCI_COMM_OTHER = 0x80
-} pci_comm_subclasses;
-
-typedef enum {
- PCI_BASE_PIC,
- PCI_BASE_DMA,
- PCI_BASE_TIMER,
- PCI_BASE_RTC,
- PCI_BASE_PCI_HOTPLUG,
- PCI_BASE_OTHER = 0x80
-} pci_base_subclasses;
-
-typedef enum {
- PCI_INPUT_KBD,
- PCI_INPUT_PEN,
- PCI_INPUT_MOUSE,
- PCI_INPUT_SCANNER,
- PCI_INPUT_GAMEPORT,
- PCI_INPUT_OTHER = 0x80
-} pci_input_subclasses;
-
-typedef enum {
- PCI_DOCK_GENERIC,
- PCI_DOCK_OTHER = 0x80
-} pci_dock_subclasses;
-
-typedef enum {
- PCI_CPU_386,
- PCI_CPU_486,
- PCI_CPU_PENTIUM,
- PCI_CPU_ALPHA = 0x10,
- PCI_CPU_POWERPC = 0x20,
- PCI_CPU_MIPS = 0x30,
- PCI_CPU_COPROC = 0x40,
- PCI_CPU_OTHER = 0x80
-} pci_cpu_subclasses;
-
-typedef enum {
- PCI_SERIAL_IEEE1394,
- PCI_SERIAL_ACCESS,
- PCI_SERIAL_SSA,
- PCI_SERIAL_USB,
- PCI_SERIAL_FIBER,
- PCI_SERIAL_SMBUS,
- PCI_SERIAL_OTHER = 0x80
-} pci_serial_subclasses;
-
-typedef enum {
- PCI_INTELLIGENT_I2O
-} pci_intelligent_subclasses;
-
-typedef enum {
- PCI_SATELLITE_TV,
- PCI_SATELLITE_AUDIO,
- PCI_SATELLITE_VOICE,
- PCI_SATELLITE_DATA,
- PCI_SATELLITE_OTHER = 0x80
-} pci_satellite_subclasses;
-
-typedef enum {
- PCI_CRYPT_NETWORK,
- PCI_CRYPT_ENTERTAINMENT,
- PCI_CRYPT_OTHER = 0x80
-} pci_crypt_subclasses;
-
-typedef enum {
- PCI_DSP_DPIO,
- PCI_DSP_OTHER = 0x80
-} pci_dsp_subclasses;
-
-typedef enum {
- PCI_XOR_QDMA,
- PCI_XOR_OTHER = 0x80
-} pci_xor_subclasses;
-
-/* Header types */
-typedef enum {
- PCI_HEADER_NORMAL,
- PCI_HEADER_BRIDGE,
- PCI_HEADER_CARDBUS
-} pci_header_types;
-
-
-/* Overlay for a PCI-to-PCI bridge */
-
-#define PPB_RSVDA_MAX 2
-#define PPB_RSVDD_MAX 8
-
-typedef struct _ppb_config_regs {
- unsigned short vendor;
- unsigned short device;
- unsigned short command;
- unsigned short status;
- unsigned char rev_id;
- unsigned char prog_if;
- unsigned char sub_class;
- unsigned char base_class;
- unsigned char cache_line_size;
- unsigned char latency_timer;
- unsigned char header_type;
- unsigned char bist;
- unsigned long rsvd_a[PPB_RSVDA_MAX];
- unsigned char prim_bus;
- unsigned char sec_bus;
- unsigned char sub_bus;
- unsigned char sec_lat;
- unsigned char io_base;
- unsigned char io_lim;
- unsigned short sec_status;
- unsigned short mem_base;
- unsigned short mem_lim;
- unsigned short pf_mem_base;
- unsigned short pf_mem_lim;
- unsigned long pf_mem_base_hi;
- unsigned long pf_mem_lim_hi;
- unsigned short io_base_hi;
- unsigned short io_lim_hi;
- unsigned short subsys_vendor;
- unsigned short subsys_id;
- unsigned long rsvd_b;
- unsigned char rsvd_c;
- unsigned char int_pin;
- unsigned short bridge_ctrl;
- unsigned char chip_ctrl;
- unsigned char diag_ctrl;
- unsigned short arb_ctrl;
- unsigned long rsvd_d[PPB_RSVDD_MAX];
- unsigned char dev_dep[192];
-} ppb_config_regs;
-
-
-/* PCI CAPABILITY DEFINES */
-#define PCI_CAP_POWERMGMTCAP_ID 0x01
-#define PCI_CAP_MSICAP_ID 0x05
-#define PCI_CAP_PCIECAP_ID 0x10
-
-/* Data structure to define the Message Signalled Interrupt facility
- * Valid for PCI and PCIE configurations
- */
-typedef struct _pciconfig_cap_msi {
- unsigned char capID;
- unsigned char nextptr;
- unsigned short msgctrl;
- unsigned int msgaddr;
-} pciconfig_cap_msi;
-
-/* Data structure to define the Power managment facility
- * Valid for PCI and PCIE configurations
- */
-typedef struct _pciconfig_cap_pwrmgmt {
- unsigned char capID;
- unsigned char nextptr;
- unsigned short pme_cap;
- unsigned short pme_sts_ctrl;
- unsigned char pme_bridge_ext;
- unsigned char data;
-} pciconfig_cap_pwrmgmt;
-
-#define PME_CAP_PM_STATES (0x1f << 27) /* Bits 31:27 states that can generate PME */
-#define PME_CSR_OFFSET 0x4 /* 4-bytes offset */
-#define PME_CSR_PME_EN (1 << 8) /* Bit 8 Enable generating of PME */
-#define PME_CSR_PME_STAT (1 << 15) /* Bit 15 PME got asserted */
-
-/* Data structure to define the PCIE capability */
-typedef struct _pciconfig_cap_pcie {
- unsigned char capID;
- unsigned char nextptr;
- unsigned short pcie_cap;
- unsigned int dev_cap;
- unsigned short dev_ctrl;
- unsigned short dev_status;
- unsigned int link_cap;
- unsigned short link_ctrl;
- unsigned short link_status;
-} pciconfig_cap_pcie;
-
-/* PCIE Enhanced CAPABILITY DEFINES */
-#define PCIE_EXTCFG_OFFSET 0x100
-#define PCIE_ADVERRREP_CAPID 0x0001
-#define PCIE_VC_CAPID 0x0002
-#define PCIE_DEVSNUM_CAPID 0x0003
-#define PCIE_PWRBUDGET_CAPID 0x0004
-
-/* Header to define the PCIE specific capabilities in the extended config space */
-typedef struct _pcie_enhanced_caphdr {
- unsigned short capID;
- unsigned short cap_ver : 4;
- unsigned short next_ptr : 12;
-} pcie_enhanced_caphdr;
-
-
-/* Everything below is BRCM HND proprietary */
-
-
-/* Brcm PCI configuration registers */
-#define cap_list rsvd_a[0]
-#define bar0_window dev_dep[0x80 - 0x40]
-#define bar1_window dev_dep[0x84 - 0x40]
-#define sprom_control dev_dep[0x88 - 0x40]
-
-#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */
-#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */
-#define PCI_SPROM_CONTROL 0x88 /* sprom property control */
-#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */
-#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */
-#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */
-#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */
-#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */
-#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address */
-#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */
-#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */
-#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */
-
-#define PCI_BAR0_SHADOW_OFFSET (2 * 1024) /* bar0 + 2K accesses sprom shadow (in pci core) */
-#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */
-#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */
-#define PCI_BAR0_PCISBR_OFFSET (4 * 1024) /* pci core SB registers are at the end of the
- * 8KB window, so their address is the "regular"
- * address plus 4K
- */
-#define PCI_BAR0_WINSZ (16 * 1024) /* bar0 window size Match with corerev 13 */
-
-/* On pci corerev >= 13 and all pcie, the bar0 is now 16KB and it maps: */
-#define PCI_16KB0_PCIREGS_OFFSET (8 * 1024) /* bar0 + 8K accesses pci/pcie core registers */
-#define PCI_16KB0_CCREGS_OFFSET (12 * 1024) /* bar0 + 12K accesses chipc core registers */
-#define PCI_16KBB0_WINSZ (16 * 1024) /* bar0 window size */
-
-/* PCI_INT_STATUS */
-#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */
-
-/* PCI_INT_MASK */
-#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */
-#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */
-#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */
-
-/* PCI_SPROM_CONTROL */
-#define SPROM_SZ_MSK 0x02 /* SPROM Size Mask */
-#define SPROM_LOCKED 0x08 /* SPROM Locked */
-#define SPROM_BLANK 0x04 /* indicating a blank SPROM */
-#define SPROM_WRITEEN 0x10 /* SPROM write enable */
-#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */
-#define SPROM_OTPIN_USE 0x80 /* device OTP In use */
-
-#define SPROM_SIZE 256 /* sprom size in 16-bit */
-#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */
-
-/* PCI_CFG_CMD_STAT */
-#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */
-
-#endif /* _h_pcicfg_ */
+++ /dev/null
-/*
- * SiliconBackplane Chipcommon core hardware definitions.
- *
- * The chipcommon core provides chip identification, SB control,
- * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
- * gpio interface, extbus, and support for serial and parallel flashes.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _SBCHIPC_H
-#define _SBCHIPC_H
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define _PADLINE(line) pad ## line
-#define _XSTR(line) _PADLINE(line)
-#define PAD _XSTR(__LINE__)
-#endif /* PAD */
-
-
-typedef volatile struct {
- uint32 chipid; /* 0x0 */
- uint32 capabilities;
- uint32 corecontrol; /* corerev >= 1 */
- uint32 bist;
-
- /* OTP */
- uint32 otpstatus; /* 0x10, corerev >= 10 */
- uint32 otpcontrol;
- uint32 otpprog;
- uint32 PAD;
-
- /* Interrupt control */
- uint32 intstatus; /* 0x20 */
- uint32 intmask;
- uint32 chipcontrol; /* 0x28, rev >= 11 */
- uint32 chipstatus; /* 0x2c, rev >= 11 */
-
- /* Jtag Master */
- uint32 jtagcmd; /* 0x30, rev >= 10 */
- uint32 jtagir;
- uint32 jtagdr;
- uint32 jtagctrl;
-
- /* serial flash interface registers */
- uint32 flashcontrol; /* 0x40 */
- uint32 flashaddress;
- uint32 flashdata;
- uint32 PAD[1];
-
- /* Silicon backplane configuration broadcast control */
- uint32 broadcastaddress; /* 0x50 */
- uint32 broadcastdata;
-
- /* gpio - cleared only by power-on-reset */
- uint32 gpiopullup; /* 0x58, corerev >= 20 */
- uint32 gpiopulldown; /* 0x5c, corerev >= 20 */
- uint32 gpioin; /* 0x60 */
- uint32 gpioout;
- uint32 gpioouten;
- uint32 gpiocontrol;
- uint32 gpiointpolarity;
- uint32 gpiointmask;
-
- /* GPIO events corerev >= 11 */
- uint32 gpioevent;
- uint32 gpioeventintmask;
-
- /* Watchdog timer */
- uint32 watchdog; /* 0x80 */
-
- /* GPIO events corerev >= 11 */
- uint32 gpioeventintpolarity;
-
- /* GPIO based LED powersave registers corerev >= 16 */
- uint32 gpiotimerval; /* 0x88 */
- uint32 gpiotimeroutmask;
-
- /* clock control */
- uint32 clockcontrol_n; /* 0x90 */
- uint32 clockcontrol_sb; /* aka m0 */
- uint32 clockcontrol_pci; /* aka m1 */
- uint32 clockcontrol_m2; /* mii/uart/mipsref */
- uint32 clockcontrol_m3; /* cpu */
- uint32 clkdiv; /* corerev >= 3 */
- uint32 PAD[2];
-
- /* pll delay registers (corerev >= 4) */
- uint32 pll_on_delay; /* 0xb0 */
- uint32 fref_sel_delay;
- uint32 slow_clk_ctl; /* 5 < corerev < 10 */
- uint32 PAD[1];
-
- /* Instaclock registers (corerev >= 10) */
- uint32 system_clk_ctl; /* 0xc0 */
- uint32 clkstatestretch;
- uint32 PAD[14];
-
- /* ExtBus control registers (corerev >= 3) */
- uint32 pcmcia_config; /* 0x100 */
- uint32 pcmcia_memwait;
- uint32 pcmcia_attrwait;
- uint32 pcmcia_iowait;
- uint32 ide_config;
- uint32 ide_memwait;
- uint32 ide_attrwait;
- uint32 ide_iowait;
- uint32 prog_config;
- uint32 prog_waitcount;
- uint32 flash_config;
- uint32 flash_waitcount;
- uint32 PAD[4];
-
- /* Enhanced Coexistance Interface (ECI) registers (corerev >= 21) */
- uint32 eci_output; /* 0x140 */
- uint32 eci_control;
- uint32 eci_inputlo;
- uint32 eci_inputmi;
- uint32 eci_inputhi;
- uint32 eci_inputintpolaritylo;
- uint32 eci_inputintpolaritymi;
- uint32 eci_inputintpolarityhi;
- uint32 eci_intmasklo;
- uint32 eci_intmaskmi;
- uint32 eci_intmaskhi;
- uint32 eci_eventlo;
- uint32 eci_eventmi;
- uint32 eci_eventhi;
- uint32 eci_eventmasklo;
- uint32 eci_eventmaskmi;
- uint32 eci_eventmaskhi;
- uint32 PAD[23];
-
-
- /* Clock control and hardware workarounds (corerev >= 20) */
- uint32 clk_ctl_st; /* 0x1e0 */
- uint32 hw_war;
- uint32 PAD[70];
-
- /* uarts */
- uint8 uart0data; /* 0x300 */
- uint8 uart0imr;
- uint8 uart0fcr;
- uint8 uart0lcr;
- uint8 uart0mcr;
- uint8 uart0lsr;
- uint8 uart0msr;
- uint8 uart0scratch;
- uint8 PAD[248]; /* corerev >= 1 */
-
- uint8 uart1data; /* 0x400 */
- uint8 uart1imr;
- uint8 uart1fcr;
- uint8 uart1lcr;
- uint8 uart1mcr;
- uint8 uart1lsr;
- uint8 uart1msr;
- uint8 uart1scratch;
- uint32 PAD[126];
-
- /* PMU registers (corerev >= 20) */
- uint32 pmucontrol; /* 0x600 */
- uint32 pmucapabilities;
- uint32 pmustatus;
- uint32 res_state;
- uint32 res_pending;
- uint32 pmutimer;
- uint32 min_res_mask;
- uint32 max_res_mask;
- uint32 res_table_sel;
- uint32 res_dep_mask;
- uint32 res_updn_timer;
- uint32 res_timer;
- uint32 clkstretch;
- uint32 pmuwatchdog;
- uint32 PAD[2];
- uint32 res_req_timer_sel;
- uint32 res_req_timer;
- uint32 res_req_mask;
- uint32 PAD;
- uint32 chipcontrol_addr;
- uint32 chipcontrol_data;
- uint32 regcontrol_addr;
- uint32 regcontrol_data;
- uint32 pllcontrol_addr;
- uint32 pllcontrol_data;
- uint32 PAD[102];
- uint16 otp[512];
-} chipcregs_t;
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-/* corecontrol */
-#define CC_UE (1 << 0) /* uart enable */
-
-#define CC_CHIPID 0
-#define CC_CAPABILITIES 4
-#define CC_OTPST 0x10
-#define CC_CHIPST 0x2c
-#define CC_JTAGCMD 0x30
-#define CC_JTAGIR 0x34
-#define CC_JTAGDR 0x38
-#define CC_JTAGCTRL 0x3c
-#define CC_WATCHDOG 0x80
-#define CC_CLKC_N 0x90
-#define CC_CLKC_M0 0x94
-#define CC_CLKC_M1 0x98
-#define CC_CLKC_M2 0x9c
-#define CC_CLKC_M3 0xa0
-#define CC_CLKDIV 0xa4
-#define CC_SYS_CLK_CTL 0xc0
-#define CC_CLK_CTL_ST SB_CLK_CTL_ST
-#define PMU_CTL 0x600
-#define PMU_CAP 0x604
-#define PMU_ST 0x608
-#define PMU_TIMER 0x614
-#define PMU_MIN_RES_MASK 0x618
-#define PMU_MAX_RES_MASK 0x61c
-#define PMU_REG_CONTROL_ADDR 0x658
-#define PMU_REG_CONTROL_DATA 0x65C
-#define PMU_PLL_CONTROL_ADDR 0x660
-#define PMU_PLL_CONTROL_DATA 0x664
-#define CC_OTP 0x800 /* OTP address space */
-
-/* chipid */
-#define CID_ID_MASK 0x0000ffff /* Chip Id mask */
-#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */
-#define CID_REV_SHIFT 16 /* Chip Revision shift */
-#define CID_PKG_MASK 0x00f00000 /* Package Option mask */
-#define CID_PKG_SHIFT 20 /* Package Option shift */
-#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */
-#define CID_CC_SHIFT 24
-
-/* capabilities */
-#define CC_CAP_UARTS_MASK 0x00000003 /* Number of uarts */
-#define CC_CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */
-#define CC_CAP_UCLKSEL 0x00000018 /* UARTs clock select */
-#define CC_CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */
-#define CC_CAP_UARTGPIO 0x00000020 /* UARTs own Gpio's 15:12 */
-#define CC_CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */
-#define CC_CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */
-#define CC_CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */
-#define CC_CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */
-#define CC_CAP_FLASH_MASK 0x00000700 /* Type of flash */
-#define CC_CAP_PLL_MASK 0x00038000 /* Type of PLL */
-#define CC_CAP_PWR_CTL 0x00040000 /* Power control */
-#define CC_CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */
-#define CC_CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */
-#define CC_CAP_OTPSIZE_BASE 5 /* OTP Size base */
-#define CC_CAP_JTAGP 0x00400000 /* JTAG Master Present */
-#define CC_CAP_ROM 0x00800000 /* Internal boot rom active */
-#define CC_CAP_BKPLN64 0x08000000 /* 64-bit backplane */
-#define CC_CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */
-#define CC_CAP_ECI 0x20000000 /* ECI Present, rev >= 21 */
-
-/* PLL type */
-#define PLL_NONE 0x00000000
-#define PLL_TYPE1 0x00010000 /* 48Mhz base, 3 dividers */
-#define PLL_TYPE2 0x00020000 /* 48Mhz, 4 dividers */
-#define PLL_TYPE3 0x00030000 /* 25Mhz, 2 dividers */
-#define PLL_TYPE4 0x00008000 /* 48Mhz, 4 dividers */
-#define PLL_TYPE5 0x00018000 /* 25Mhz, 4 dividers */
-#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */
-#define PLL_TYPE7 0x00038000 /* 25Mhz, 4 dividers */
-
-/* ALP clock on pre-PMU chips */
-#define ALP_CLOCK 20000000
-
-/* HT clock */
-#define HT_CLOCK 80000000
-
-/* watchdog clock */
-#define WATCHDOG_CLOCK_5354 32000 /* Hz */
-
-/* corecontrol */
-#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */
-#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
-#define CC_UARTCLKEN 0x00000008 /* enable UART Clock (corerev > = 21 */
-
-/* chipcontrol */
-#define CHIPCTRL_4321A0_DEFAULT 0x3a4
-#define CHIPCTRL_4321A1_DEFAULT 0x0a4
-
-/* Fields in the otpstatus register in rev >= 21 */
-#define OTPS_OL_MASK 0x000000ff
-#define OTPS_OL_MFG 0x00000001 /* manuf row is locked */
-#define OTPS_OL_OR1 0x00000002 /* otp redundancy row 1 is locked */
-#define OTPS_OL_OR2 0x00000004 /* otp redundancy row 2 is locked */
-#define OTPS_OL_GU 0x00000008 /* general use region is locked */
-#define OTPS_GUP_MASK 0x00000f00
-#define OTPS_GUP_SHIFT 8
-#define OTPS_GUP_HW 0x00000100 /* h/w subregion is programmed */
-#define OTPS_GUP_SW 0x00000200 /* s/w subregion is programmed */
-#define OTPS_GUP_CI 0x00000400 /* chipid/pkgopt subregion is programmed */
-#define OTPS_GUP_FUSE 0x00000800 /* fuse subregion is programmed */
-#define OTPS_READY 0x00001000
-#define OTPS_RV(x) (1 << (16 + (x)))
-
-/* Fields in the otpcontrol register in rev >= 21 */
-#define OTPC_PROGSEL 0x00000001
-#define OTPC_PCOUNT_MASK 0x0000000e
-#define OTPC_PCOUNT_SHIFT 1
-#define OTPC_VSEL_MASK 0x000000f0
-#define OTPC_VSEL_SHIFT 4
-#define OTPC_TMM_MASK 0x00000700
-#define OTPC_TMM_SHIFT 8
-#define OTPC_ODM 0x00000800
-#define OTPC_PROGEN 0x80000000
-
-/* Fields in otpprog in rev >= 21 */
-#define OTPP_COL_MASK 0x000000ff
-#define OTPP_COL_SHIFT 0
-#define OTPP_ROW_MASK 0x0000ff00
-#define OTPP_ROW_SHIFT 8
-#define OTPP_OC_MASK 0x0f000000
-#define OTPP_OC_SHIFT 24
-#define OTPP_READERR 0x10000000
-#define OTPP_VALUE_MASK 0x20000000
-#define OTPP_VALUE_SHIFT 29
-#define OTPP_START_BUSY 0x80000000
-
-/* Opcodes for OTPP_OC field */
-#define OTPPOC_READ 0
-#define OTPPOC_BIT_PROG 1
-#define OTPPOC_VERIFY 3
-#define OTPPOC_INIT 4
-#define OTPPOC_SET 5
-#define OTPPOC_RESET 6
-#define OTPPOC_OCST 7
-#define OTPPOC_ROW_LOCK 8
-#define OTPPOC_PRESCN_TEST 9
-
-/* jtagcmd */
-#define JCMD_START 0x80000000
-#define JCMD_BUSY 0x80000000
-#define JCMD_PAUSE 0x40000000
-#define JCMD0_ACC_MASK 0x0000f000
-#define JCMD0_ACC_IRDR 0x00000000
-#define JCMD0_ACC_DR 0x00001000
-#define JCMD0_ACC_IR 0x00002000
-#define JCMD0_ACC_RESET 0x00003000
-#define JCMD0_ACC_IRPDR 0x00004000
-#define JCMD0_ACC_PDR 0x00005000
-#define JCMD0_IRW_MASK 0x00000f00
-#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */
-#define JCMD_ACC_IRDR 0x00000000
-#define JCMD_ACC_DR 0x00010000
-#define JCMD_ACC_IR 0x00020000
-#define JCMD_ACC_RESET 0x00030000
-#define JCMD_ACC_IRPDR 0x00040000
-#define JCMD_ACC_PDR 0x00050000
-#define JCMD_IRW_MASK 0x00001f00
-#define JCMD_IRW_SHIFT 8
-#define JCMD_DRW_MASK 0x0000003f
-
-/* jtagctrl */
-#define JCTRL_FORCE_CLK 4 /* Force clock */
-#define JCTRL_EXT_EN 2 /* Enable external targets */
-#define JCTRL_EN 1 /* Enable Jtag master */
-
-/* Fields in clkdiv */
-#define CLKD_SFLASH 0x0f000000
-#define CLKD_SFLASH_SHIFT 24
-#define CLKD_OTP 0x000f0000
-#define CLKD_OTP_SHIFT 16
-#define CLKD_JTAG 0x00000f00
-#define CLKD_JTAG_SHIFT 8
-#define CLKD_UART 0x000000ff
-
-/* intstatus/intmask */
-#define CI_GPIO 0x00000001 /* gpio intr */
-#define CI_EI 0x00000002 /* extif intr (corerev >= 3) */
-#define CI_TEMP 0x00000004 /* temp. ctrl intr (corerev >= 15) */
-#define CI_SIRQ 0x00000008 /* serial IRQ intr (corerev >= 15) */
-#define CI_ECI 0x00000010 /* eci intr (corerev >= 21) */
-#define CI_PMU 0x00000020 /* pmu intr (corerev >= 21) */
-#define CI_UART 0x00000040 /* uart intr (corerev >= 21) */
-#define CI_WDRESET 0x80000000 /* watchdog reset occurred */
-
-/* slow_clk_ctl */
-#define SCC_SS_MASK 0x00000007 /* slow clock source mask */
-#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */
-#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */
-#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */
-#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
-#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled,
- * 0: LPO is enabled
- */
-#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock,
- * 0: power logic control
- */
-#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors
- * PLL clock disable requests from core
- */
-#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't
- * disable crystal when appropriate
- */
-#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
-#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
-#define SCC_CD_SHIFT 16
-
-/* system_clk_ctl */
-#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */
-#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */
-#define SYCC_FP 0x00000004 /* ForcePLLOn */
-#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */
-#define SYCC_HR 0x00000010 /* Force HT */
-#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */
-#define SYCC_CD_SHIFT 16
-
-/* pcmcia_iowait */
-#define PI_W0_MASK 0x0000003f /* waitcount0 */
-#define PI_W1_MASK 0x00001f00 /* waitcount1 */
-#define PI_W1_SHIFT 8
-#define PI_W2_MASK 0x001f0000 /* waitcount2 */
-#define PI_W2_SHIFT 16
-#define PI_W3_MASK 0x1f000000 /* waitcount3 */
-#define PI_W3_SHIFT 24
-
-/* prog_waitcount */
-#define PW_W0_MASK 0x0000001f /* waitcount0 */
-#define PW_W1_MASK 0x00001f00 /* waitcount1 */
-#define PW_W1_SHIFT 8
-#define PW_W2_MASK 0x001f0000 /* waitcount2 */
-#define PW_W2_SHIFT 16
-#define PW_W3_MASK 0x1f000000 /* waitcount3 */
-#define PW_W3_SHIFT 24
-
-#define PW_W0 0x0000000c
-#define PW_W1 0x00000a00
-#define PW_W2 0x00020000
-#define PW_W3 0x01000000
-
-/* watchdog */
-#define WATCHDOG_CLOCK 48000000 /* Hz */
-
-/* Fields in pmucontrol */
-#define PCTL_ILP_DIV_MASK 0xffff0000
-#define PCTL_ILP_DIV_SHIFT 16
-#define PCTL_NOILP_ON_WAIT 0x00000200
-#define PCTL_HT_REQ_EN 0x00000100
-#define PCTL_ALP_REQ_EN 0x00000080
-#define PCTL_XTALFREQ_MASK 0x0000007c
-#define PCTL_XTALFREQ_SHIFT 2
-#define PCTL_ILP_DIV_EN 0x00000002
-#define PCTL_LPO_SEL 0x00000001
-
-/* gpiotimerval */
-#define GPIO_ONTIME_SHIFT 16
-
-/* clockcontrol_n */
-#define CN_N1_MASK 0x3f /* n1 control */
-#define CN_N2_MASK 0x3f00 /* n2 control */
-#define CN_N2_SHIFT 8
-#define CN_PLLC_MASK 0xf0000 /* pll control */
-#define CN_PLLC_SHIFT 16
-
-/* clockcontrol_sb/pci/uart */
-#define CC_M1_MASK 0x3f /* m1 control */
-#define CC_M2_MASK 0x3f00 /* m2 control */
-#define CC_M2_SHIFT 8
-#define CC_M3_MASK 0x3f0000 /* m3 control */
-#define CC_M3_SHIFT 16
-#define CC_MC_MASK 0x1f000000 /* mux control */
-#define CC_MC_SHIFT 24
-
-/* N3M Clock control magic field values */
-#define CC_F6_2 0x02 /* A factor of 2 in */
-#define CC_F6_3 0x03 /* 6-bit fields like */
-#define CC_F6_4 0x05 /* N1, M1 or M3 */
-#define CC_F6_5 0x09
-#define CC_F6_6 0x11
-#define CC_F6_7 0x21
-
-#define CC_F5_BIAS 5 /* 5-bit fields get this added */
-
-#define CC_MC_BYPASS 0x08
-#define CC_MC_M1 0x04
-#define CC_MC_M1M2 0x02
-#define CC_MC_M1M2M3 0x01
-#define CC_MC_M1M3 0x11
-
-/* Type 2 Clock control magic field values */
-#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */
-#define CC_T2M2_BIAS 3 /* m2 bias */
-
-#define CC_T2MC_M1BYP 1
-#define CC_T2MC_M2BYP 2
-#define CC_T2MC_M3BYP 4
-
-/* Type 6 Clock control magic field values */
-#define CC_T6_MMASK 1 /* bits of interest in m */
-#define CC_T6_M0 120000000 /* sb clock for m = 0 */
-#define CC_T6_M1 100000000 /* sb clock for m = 1 */
-#define SB2MIPS_T6(sb) (2 * (sb))
-
-/* Common clock base */
-#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */
-#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLL's */
-
-/* Clock control values for 200Mhz in 5350 */
-#define CLKC_5350_N 0x0311
-#define CLKC_5350_M 0x04020009
-
-/* Flash types in the chipcommon capabilities register */
-#define FLASH_NONE 0x000 /* No flash */
-#define SFLASH_ST 0x100 /* ST serial flash */
-#define SFLASH_AT 0x200 /* Atmel serial flash */
-#define PFLASH 0x700 /* Parallel flash */
-
-/* Bits in the ExtBus config registers */
-#define CC_CFG_EN 0x0001 /* Enable */
-#define CC_CFG_EM_MASK 0x000e /* Extif Mode */
-#define CC_CFG_EM_ASYNC 0x0000 /* Async/Parallel flash */
-#define CC_CFG_EM_SYNC 0x0002 /* Synchronous */
-#define CC_CFG_EM_PCMCIA 0x0004 /* PCMCIA */
-#define CC_CFG_EM_IDE 0x0006 /* IDE */
-#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */
-#define CC_CFG_CD_MASK 0x00e0 /* Sync: Clock divisor, rev >= 20 */
-#define CC_CFG_CE 0x0100 /* Sync: Clock enable, rev >= 20 */
-#define CC_CFG_SB 0x0200 /* Sync: Size/Bytestrobe, rev >= 20 */
-#define CC_CFG_IS 0x0400 /* Extif Sync Clk Select, rev >= 20 */
-
-/* ExtBus address space */
-#define CC_EB_BASE 0x1a000000 /* Chipc ExtBus base address */
-#define CC_EB_PCMCIA_MEM 0x1a000000 /* PCMCIA 0 memory base address */
-#define CC_EB_PCMCIA_IO 0x1a200000 /* PCMCIA 0 I/O base address */
-#define CC_EB_PCMCIA_CFG 0x1a400000 /* PCMCIA 0 config base address */
-#define CC_EB_IDE 0x1a800000 /* IDE memory base */
-#define CC_EB_PCMCIA1_MEM 0x1a800000 /* PCMCIA 1 memory base address */
-#define CC_EB_PCMCIA1_IO 0x1aa00000 /* PCMCIA 1 I/O base address */
-#define CC_EB_PCMCIA1_CFG 0x1ac00000 /* PCMCIA 1 config base address */
-#define CC_EB_PROGIF 0x1b000000 /* ProgIF Async/Sync base address */
-
-
-/* Start/busy bit in flashcontrol */
-#define SFLASH_OPCODE 0x000000ff
-#define SFLASH_ACTION 0x00000700
-#define SFLASH_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */
-#define SFLASH_START 0x80000000
-#define SFLASH_BUSY SFLASH_START
-
-/* flashcontrol action codes */
-#define SFLASH_ACT_OPONLY 0x0000 /* Issue opcode only */
-#define SFLASH_ACT_OP1D 0x0100 /* opcode + 1 data byte */
-#define SFLASH_ACT_OP3A 0x0200 /* opcode + 3 address bytes */
-#define SFLASH_ACT_OP3A1D 0x0300 /* opcode + 3 addres & 1 data bytes */
-#define SFLASH_ACT_OP3A4D 0x0400 /* opcode + 3 addres & 4 data bytes */
-#define SFLASH_ACT_OP3A4X4D 0x0500 /* opcode + 3 addres, 4 don't care & 4 data bytes */
-#define SFLASH_ACT_OP3A1X4D 0x0700 /* opcode + 3 addres, 1 don't care & 4 data bytes */
-
-/* flashcontrol action+opcodes for ST flashes */
-#define SFLASH_ST_WREN 0x0006 /* Write Enable */
-#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */
-#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */
-#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */
-#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */
-#define SFLASH_ST_PP 0x0302 /* Page Program */
-#define SFLASH_ST_SE 0x02d8 /* Sector Erase */
-#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */
-#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */
-#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */
-#define SFLASH_ST_CSA 0x1000 /* Keep chip select asserted */
-
-/* Status register bits for ST flashes */
-#define SFLASH_ST_WIP 0x01 /* Write In Progress */
-#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */
-#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */
-#define SFLASH_ST_BP_SHIFT 2
-#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */
-
-/* flashcontrol action+opcodes for Atmel flashes */
-#define SFLASH_AT_READ 0x07e8
-#define SFLASH_AT_PAGE_READ 0x07d2
-#define SFLASH_AT_BUF1_READ
-#define SFLASH_AT_BUF2_READ
-#define SFLASH_AT_STATUS 0x01d7
-#define SFLASH_AT_BUF1_WRITE 0x0384
-#define SFLASH_AT_BUF2_WRITE 0x0387
-#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283
-#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286
-#define SFLASH_AT_BUF1_PROGRAM 0x0288
-#define SFLASH_AT_BUF2_PROGRAM 0x0289
-#define SFLASH_AT_PAGE_ERASE 0x0281
-#define SFLASH_AT_BLOCK_ERASE 0x0250
-#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
-#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
-#define SFLASH_AT_BUF1_LOAD 0x0253
-#define SFLASH_AT_BUF2_LOAD 0x0255
-#define SFLASH_AT_BUF1_COMPARE 0x0260
-#define SFLASH_AT_BUF2_COMPARE 0x0261
-#define SFLASH_AT_BUF1_REPROGRAM 0x0258
-#define SFLASH_AT_BUF2_REPROGRAM 0x0259
-
-/* Status register bits for Atmel flashes */
-#define SFLASH_AT_READY 0x80
-#define SFLASH_AT_MISMATCH 0x40
-#define SFLASH_AT_ID_MASK 0x38
-#define SFLASH_AT_ID_SHIFT 3
-
-/*
- * These are the UART port assignments, expressed as offsets from the base
- * register. These assignments should hold for any serial port based on
- * a 8250, 16450, or 16550(A).
- */
-
-#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
-#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
-#define UART_IER 1 /* In/Out: Interrupt Enable Register (DLAB=0) */
-#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */
-#define UART_IIR 2 /* In: Interrupt Identity Register */
-#define UART_FCR 2 /* Out: FIFO Control Register */
-#define UART_LCR 3 /* Out: Line Control Register */
-#define UART_MCR 4 /* Out: Modem Control Register */
-#define UART_LSR 5 /* In: Line Status Register */
-#define UART_MSR 6 /* In: Modem Status Register */
-#define UART_SCR 7 /* I/O: Scratch Register */
-#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
-#define UART_MCR_OUT2 0x08 /* MCR GPIO out 2 */
-#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
-#define UART_LSR_RXRDY 0x01 /* Receiver ready */
-#define UART_FCR_FIFO_ENABLE 1 /* FIFO control register bit controlling FIFO enable/disable */
-
-/* Interrupt Identity Register (IIR) bits */
-#define UART_IIR_FIFO_MASK 0xc0 /* IIR FIFO disable/enabled mask */
-#define UART_IIR_INT_MASK 0xf /* IIR interrupt ID source */
-#define UART_IIR_MDM_CHG 0x0 /* Modem status changed */
-#define UART_IIR_NOINT 0x1 /* No interrupt pending */
-#define UART_IIR_THRE 0x2 /* THR empty */
-#define UART_IIR_RCVD_DATA 0x4 /* Received data available */
-#define UART_IIR_RCVR_STATUS 0x6 /* Receiver status */
-#define UART_IIR_CHAR_TIME 0xc /* Character time */
-
-/* Interrupt Enable Register (IER) bits */
-#define UART_IER_EDSSI 8 /* enable modem status interrupt */
-#define UART_IER_ELSI 4 /* enable receiver line status interrupt */
-#define UART_IER_ETBEI 2 /* enable transmitter holding register empty interrupt */
-#define UART_IER_ERBFI 1 /* enable data available interrupt */
-
-/* pmustatus */
-#define PST_INTPEND 0x0040
-#define PST_SBCLKST 0x0030
-#define PST_ALPAVAIL 0x0008
-#define PST_HTAVAIL 0x0004
-#define PST_RESINIT 0x0003
-
-/* pmucapabilities */
-#define PCAP_REV_MASK 0x000000ff
-
-/* PMU Resource Request Timer registers */
-/* This is based on PmuRev0 */
-#define PRRT_TIME_MASK 0x03ff
-#define PRRT_INTEN 0x0400
-#define PRRT_REQ_ACTIVE 0x0800
-#define PRRT_ALP_REQ 0x1000
-#define PRRT_HT_REQ 0x2000
-
-/* PMU resource bit position */
-#define PMURES_BIT(bit) (1 << (bit))
-
-/* PMU corerev and chip specific PLL controls.
- * PMU<rev>_PLL<num>_XXXX where <rev> is PMU corerev and <num> is an arbitary number
- * to differentiate different PLLs controlled by the same PMU rev.
- */
-/* pllcontrol registers */
-/* PDIV, div_phy, div_arm, div_adc, dith_sel, ioff, kpd_scale, lsb_sel, mash_sel, lf_c & lf_r */
-#define PMU0_PLL0_PLLCTL0 0
-#define PMU0_PLL0_PC0_PDIV_MASK 1
-#define PMU0_PLL0_PC0_PDIV_FREQ 25000
-#define PMU0_PLL0_PC0_DIV_ARM_MASK 0x00000038
-#define PMU0_PLL0_PC0_DIV_ARM_SHIFT 3
-#define PMU0_PLL0_PC0_DIV_ARM_BASE 8
-
-/* PC0_DIV_ARM for PLLOUT_ARM */
-#define PMU0_PLL0_PC0_DIV_ARM_110MHZ 0
-#define PMU0_PLL0_PC0_DIV_ARM_97_7MHZ 1
-#define PMU0_PLL0_PC0_DIV_ARM_88MHZ 2
-#define PMU0_PLL0_PC0_DIV_ARM_80MHZ 3 /* Default */
-#define PMU0_PLL0_PC0_DIV_ARM_73_3MHZ 4
-#define PMU0_PLL0_PC0_DIV_ARM_67_7MHZ 5
-#define PMU0_PLL0_PC0_DIV_ARM_62_9MHZ 6
-#define PMU0_PLL0_PC0_DIV_ARM_58_6MHZ 7
-
-/* Wildcard base, stop_mod, en_lf_tp, en_cal & lf_r2 */
-#define PMU0_PLL0_PLLCTL1 1
-#define PMU0_PLL0_PC1_WILD_INT_MASK 0xf0000000
-#define PMU0_PLL0_PC1_WILD_INT_SHIFT 28
-#define PMU0_PLL0_PC1_WILD_FRAC_MASK 0x0fffff00
-#define PMU0_PLL0_PC1_WILD_FRAC_SHIFT 8
-#define PMU0_PLL0_PC1_STOP_MOD 0x00000040
-
-/* Wildcard base, vco_calvar, vco_swc, vco_var_selref, vso_ical & vco_sel_avdd */
-#define PMU0_PLL0_PLLCTL2 2
-#define PMU0_PLL0_PC2_WILD_INT_MASK 0xf
-#define PMU0_PLL0_PC2_WILD_INT_SHIFT 4
-
-/* Chip specific PMU resources. */
-#define RES4328_EXT_SWITCHER_PWM 0 /* 0x00001 */
-#define RES4328_BB_SWITCHER_PWM 1 /* 0x00002 */
-#define RES4328_BB_SWITCHER_BURST 2 /* 0x00004 */
-#define RES4328_BB_EXT_SWITCHER_BURST 3 /* 0x00008 */
-#define RES4328_ILP_REQUEST 4 /* 0x00010 */
-#define RES4328_RADIO_SWITCHER_PWM 5 /* 0x00020 */
-#define RES4328_RADIO_SWITCHER_BURST 6 /* 0x00040 */
-#define RES4328_ROM_SWITCH 7 /* 0x00080 */
-#define RES4328_PA_REF_LDO 8 /* 0x00100 */
-#define RES4328_RADIO_LDO 9 /* 0x00200 */
-#define RES4328_AFE_LDO 10 /* 0x00400 */
-#define RES4328_PLL_LDO 11 /* 0x00800 */
-#define RES4328_BG_FILTBYP 12 /* 0x01000 */
-#define RES4328_TX_FILTBYP 13 /* 0x02000 */
-#define RES4328_RX_FILTBYP 14 /* 0x04000 */
-#define RES4328_XTAL_PU 15 /* 0x08000 */
-#define RES4328_XTAL_EN 16 /* 0x10000 */
-#define RES4328_BB_PLL_FILTBYP 17 /* 0x20000 */
-#define RES4328_RF_PLL_FILTBYP 18 /* 0x40000 */
-#define RES4328_BB_PLL_PU 19 /* 0x80000 */
-
-#define RES5354_EXT_SWITCHER_PWM 0 /* 0x00001 */
-#define RES5354_BB_SWITCHER_PWM 1 /* 0x00002 */
-#define RES5354_BB_SWITCHER_BURST 2 /* 0x00004 */
-#define RES5354_BB_EXT_SWITCHER_BURST 3 /* 0x00008 */
-#define RES5354_ILP_REQUEST 4 /* 0x00010 */
-#define RES5354_RADIO_SWITCHER_PWM 5 /* 0x00020 */
-#define RES5354_RADIO_SWITCHER_BURST 6 /* 0x00040 */
-#define RES5354_ROM_SWITCH 7 /* 0x00080 */
-#define RES5354_PA_REF_LDO 8 /* 0x00100 */
-#define RES5354_RADIO_LDO 9 /* 0x00200 */
-#define RES5354_AFE_LDO 10 /* 0x00400 */
-#define RES5354_PLL_LDO 11 /* 0x00800 */
-#define RES5354_BG_FILTBYP 12 /* 0x01000 */
-#define RES5354_TX_FILTBYP 13 /* 0x02000 */
-#define RES5354_RX_FILTBYP 14 /* 0x04000 */
-#define RES5354_XTAL_PU 15 /* 0x08000 */
-#define RES5354_XTAL_EN 16 /* 0x10000 */
-#define RES5354_BB_PLL_FILTBYP 17 /* 0x20000 */
-#define RES5354_RF_PLL_FILTBYP 18 /* 0x40000 */
-#define RES5354_BB_PLL_PU 19 /* 0x80000 */
-
-/* pllcontrol registers */
-/* ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>, p1div, p2div, _bypsss_sdmod */
-#define PMU1_PLL0_PLLCTL0 0
-#define PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000
-#define PMU1_PLL0_PC0_P1DIV_SHIFT 20
-#define PMU1_PLL0_PC0_P2DIV_MASK 0x0f000000
-#define PMU1_PLL0_PC0_P2DIV_SHIFT 24
-
-/* m<x>div */
-#define PMU1_PLL0_PLLCTL1 1
-#define PMU1_PLL0_PC1_M1DIV_MASK 0x000000ff
-#define PMU1_PLL0_PC1_M1DIV_SHIFT 0
-#define PMU1_PLL0_PC1_M2DIV_MASK 0x0000ff00
-#define PMU1_PLL0_PC1_M2DIV_SHIFT 8
-#define PMU1_PLL0_PC1_M3DIV_MASK 0x00ff0000
-#define PMU1_PLL0_PC1_M3DIV_SHIFT 16
-#define PMU1_PLL0_PC1_M4DIV_MASK 0xff000000
-#define PMU1_PLL0_PC1_M4DIV_SHIFT 24
-
-/* m<x>div, ndiv_dither_mfb, ndiv_mode, ndiv_int */
-#define PMU1_PLL0_PLLCTL2 2
-#define PMU1_PLL0_PC2_M5DIV_MASK 0x000000ff
-#define PMU1_PLL0_PC2_M5DIV_SHIFT 0
-#define PMU1_PLL0_PC2_M6DIV_MASK 0x0000ff00
-#define PMU1_PLL0_PC2_M6DIV_SHIFT 8
-#define PMU1_PLL0_PC2_NDIV_MODE_MASK 0x000e0000
-#define PMU1_PLL0_PC2_NDIV_MODE_SHIFT 17
-#define PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000
-#define PMU1_PLL0_PC2_NDIV_INT_SHIFT 20
-
-/* ndiv_frac */
-#define PMU1_PLL0_PLLCTL3 3
-#define PMU1_PLL0_PC3_NDIV_FRAC_MASK 0x00ffffff
-#define PMU1_PLL0_PC3_NDIV_FRAC_SHIFT 0
-
-/* pll_ctrl */
-#define PMU1_PLL0_PLLCTL4 4
-
-/* pll_ctrl, vco_rng, clkdrive_ch<x> */
-#define PMU1_PLL0_PLLCTL5 5
-#define PMU1_PLL0_PC5_CLK_DRV_MASK 0xffffff00
-#define PMU1_PLL0_PC5_CLK_DRV_SHIFT 8
-
-#define RES4325_BUCK_BOOST_BURST 0 /* 0x00000001 */
-#define RES4325_CBUCK_BURST 1 /* 0x00000002 */
-#define RES4325_CBUCK_PWM 2 /* 0x00000004 */
-#define RES4325_CLDO_CBUCK_BURST 3 /* 0x00000008 */
-#define RES4325_CLDO_CBUCK_PWM 4 /* 0x00000010 */
-#define RES4325_BUCK_BOOST_PWM 5 /* 0x00000020 */
-#define RES4325_ILP_REQUEST 6 /* 0x00000040 */
-#define RES4325_ABUCK_BURST 7 /* 0x00000080 */
-#define RES4325_ABUCK_PWM 8 /* 0x00000100 */
-#define RES4325_LNLDO1_PU 9 /* 0x00000200 */
-#define RES4325_LNLDO2_PU 10 /* 0x00000400 */
-#define RES4325_LNLDO3_PU 11 /* 0x00000800 */
-#define RES4325_LNLDO4_PU 12 /* 0x00001000 */
-#define RES4325_XTAL_PU 13 /* 0x00002000 */
-#define RES4325_ALP_AVAIL 14 /* 0x00004000 */
-#define RES4325_RX_PWRSW_PU 15 /* 0x00008000 */
-#define RES4325_TX_PWRSW_PU 16 /* 0x00010000 */
-#define RES4325_RFPLL_PWRSW_PU 17 /* 0x00020000 */
-#define RES4325_LOGEN_PWRSW_PU 18 /* 0x00040000 */
-#define RES4325_AFE_PWRSW_PU 19 /* 0x00080000 */
-#define RES4325_BBPLL_PWRSW_PU 20 /* 0x00100000 */
-#define RES4325_HT_AVAIL 21 /* 0x00200000 */
-
-/* Chip specific ChipStatus register bits */
-#define CST4325_SPROM_OTP_SEL_MASK 0x00000003
-#define CST4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
-#define CST4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
-#define CST4325_OTP_SEL 2 /* OTP is powered up, no SPROM */
-#define CST4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */
-#define CST4325_SDIO_USB_MODE_MASK 0x00000004
-#define CST4325_SDIO_USB_MODE_SHIFT 2
-#define CST4325_RCAL_VALID_MASK 0x00000008
-#define CST4325_RCAL_VALID_SHIFT 3
-#define CST4325_RCAL_VALUE_MASK 0x000001f0
-#define CST4325_RCAL_VALUE_SHIFT 4
-#define CST4325_PMUTOP_2B_MASK 0x00000200 /* 1 for 2b, 0 for to 2a */
-#define CST4325_PMUTOP_2B_SHIFT 9
-
-#define RES4312_SWITCHER_BURST 0 /* 0x00000001 */
-#define RES4312_SWITCHER_PWM 1 /* 0x00000002 */
-#define RES4312_PA_REF_LDO 2 /* 0x00000004 */
-#define RES4312_CORE_LDO_BURST 3 /* 0x00000008 */
-#define RES4312_CORE_LDO_PWM 4 /* 0x00000010 */
-#define RES4312_RADIO_LDO 5 /* 0x00000020 */
-#define RES4312_ILP_REQUEST 6 /* 0x00000040 */
-#define RES4312_BG_FILTBYP 7 /* 0x00000080 */
-#define RES4312_TX_FILTBYP 8 /* 0x00000100 */
-#define RES4312_RX_FILTBYP 9 /* 0x00000200 */
-#define RES4312_XTAL_PU 10 /* 0x00000400 */
-#define RES4312_ALP_AVAIL 11 /* 0x00000800 */
-#define RES4312_BB_PLL_FILTBYP 12 /* 0x00001000 */
-#define RES4312_RF_PLL_FILTBYP 13 /* 0x00002000 */
-#define RES4312_HT_AVAIL 14 /* 0x00004000 */
-
-/*
-* Maximum delay for the PMU state transition.
-* This is an upper bound intended for spinwaits etc.
-*/
-#define PMU_MAX_TRANSITION_DLY 15000
-
-#endif /* _SBCHIPC_H */
+++ /dev/null
-/*
- * Broadcom SiliconBackplane hardware register definitions.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _SBCONFIG_H
-#define _SBCONFIG_H
-#include "linuxver.h"
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define _PADLINE(line) pad ## line
-#define _XSTR(line) _PADLINE(line)
-#define PAD _XSTR(__LINE__)
-#endif
-
-/*
- * SiliconBackplane Address Map.
- * All regions may not exist on all chips.
- */
-#define SB_SDRAM_BASE 0x00000000 /* Physical SDRAM */
-#define SB_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */
-#define SB_PCI_MEM_SZ (64 * 1024 * 1024)
-#define SB_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */
-#define SB_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
-#define SB_ENUM_BASE 0x18000000 /* Enumeration space base */
-#define SB_ENUM_LIM 0x18010000 /* Enumeration space limit */
-
-#define SB_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
-#define SB_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
-#define SB_EXTIF_BASE 0x1f000000 /* External Interface region base address */
-#define SB_ARMCM3_ROM 0x1e000000 /* ARM Cortex-M3 ROM */
-#define SB_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
-#define SB_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */
-#define SB_ARM7S_ROM 0x20000000 /* ARM7TDMI-S ROM */
-#define SB_ARMCM3_SRAM2 0x60000000 /* ARM Cortex-M3 SRAM Region 2 */
-#define SB_ARM7S_SRAM2 0x80000000 /* ARM7TDMI-S SRAM Region 2 */
-#define SB_ARM_FLASH1 0xffff0000 /* ARM Flash Region 1 */
-#define SB_ARM_FLASH1_SZ 0x00010000 /* ARM Size of Flash Region 1 */
-
-#define SB_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */
-#define SB_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */
-#define SB_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2
- * (2 ZettaBytes), low 32 bits
- */
-#define SB_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2
- * (2 ZettaBytes), high 32 bits
- */
-#define SB_EUART (SB_EXTIF_BASE + 0x00800000)
-#define SB_LED (SB_EXTIF_BASE + 0x00900000)
-
-
-/* enumeration space related defs */
-#define SB_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */
-#define SB_MAXCORES ((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
-#define SB_MAXFUNCS 4 /* max. # functions per core */
-#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */
-#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */
-
-/* mips address */
-#define SB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
-
-/*
- * Sonics Configuration Space Registers.
- */
-#define SBIPSFLAG 0x08
-#define SBTPSFLAG 0x18
-#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */
-#define SBTMERRLOG 0x50 /* sonics >= 2.3 */
-#define SBADMATCH3 0x60
-#define SBADMATCH2 0x68
-#define SBADMATCH1 0x70
-#define SBIMSTATE 0x90
-#define SBINTVEC 0x94
-#define SBTMSTATELOW 0x98
-#define SBTMSTATEHIGH 0x9c
-#define SBBWA0 0xa0
-#define SBIMCONFIGLOW 0xa8
-#define SBIMCONFIGHIGH 0xac
-#define SBADMATCH0 0xb0
-#define SBTMCONFIGLOW 0xb8
-#define SBTMCONFIGHIGH 0xbc
-#define SBBCONFIG 0xc0
-#define SBBSTATE 0xc8
-#define SBACTCNFG 0xd8
-#define SBFLAGST 0xe8
-#define SBIDLOW 0xf8
-#define SBIDHIGH 0xfc
-
-/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have
- * a few registers *below* that line. I think it would be very confusing to try
- * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here,
- */
-
-#define SBIMERRLOGA 0xea8
-#define SBIMERRLOG 0xeb0
-#define SBTMPORTCONNID0 0xed8
-#define SBTMPORTLOCK0 0xef8
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-typedef volatile struct _sbconfig {
- uint32 PAD[2];
- uint32 sbipsflag; /* initiator port ocp slave flag */
- uint32 PAD[3];
- uint32 sbtpsflag; /* target port ocp slave flag */
- uint32 PAD[11];
- uint32 sbtmerrloga; /* (sonics >= 2.3) */
- uint32 PAD;
- uint32 sbtmerrlog; /* (sonics >= 2.3) */
- uint32 PAD[3];
- uint32 sbadmatch3; /* address match3 */
- uint32 PAD;
- uint32 sbadmatch2; /* address match2 */
- uint32 PAD;
- uint32 sbadmatch1; /* address match1 */
- uint32 PAD[7];
- uint32 sbimstate; /* initiator agent state */
- uint32 sbintvec; /* interrupt mask */
- uint32 sbtmstatelow; /* target state */
- uint32 sbtmstatehigh; /* target state */
- uint32 sbbwa0; /* bandwidth allocation table0 */
- uint32 PAD;
- uint32 sbimconfiglow; /* initiator configuration */
- uint32 sbimconfighigh; /* initiator configuration */
- uint32 sbadmatch0; /* address match0 */
- uint32 PAD;
- uint32 sbtmconfiglow; /* target configuration */
- uint32 sbtmconfighigh; /* target configuration */
- uint32 sbbconfig; /* broadcast configuration */
- uint32 PAD;
- uint32 sbbstate; /* broadcast state */
- uint32 PAD[3];
- uint32 sbactcnfg; /* activate configuration */
- uint32 PAD[3];
- uint32 sbflagst; /* current sbflags */
- uint32 PAD[3];
- uint32 sbidlow; /* identification */
- uint32 sbidhigh; /* identification */
-} sbconfig_t;
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-/* sbipsflag */
-#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */
-#define SBIPS_INT1_SHIFT 0
-#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */
-#define SBIPS_INT2_SHIFT 8
-#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */
-#define SBIPS_INT3_SHIFT 16
-#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */
-#define SBIPS_INT4_SHIFT 24
-
-/* sbtpsflag */
-#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */
-#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */
-
-/* sbtmerrlog */
-#define SBTMEL_CM 0x00000007 /* command */
-#define SBTMEL_CI 0x0000ff00 /* connection id */
-#define SBTMEL_EC 0x0f000000 /* error code */
-#define SBTMEL_ME 0x80000000 /* multiple error */
-
-/* sbimstate */
-#define SBIM_PC 0xf /* pipecount */
-#define SBIM_AP_MASK 0x30 /* arbitration policy */
-#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */
-#define SBIM_AP_TS 0x10 /* use timesliaces only */
-#define SBIM_AP_TK 0x20 /* use token only */
-#define SBIM_AP_RSV 0x30 /* reserved */
-#define SBIM_IBE 0x20000 /* inbanderror */
-#define SBIM_TO 0x40000 /* timeout */
-#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */
-#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */
-
-/* sbtmstatelow */
-#define SBTML_RESET 0x1 /* reset */
-#define SBTML_REJ_MASK 0x6 /* reject */
-#define SBTML_REJ_SHIFT 1
-#define SBTML_CLK 0x10000 /* clock enable */
-#define SBTML_FGC 0x20000 /* force gated clocks on */
-#define SBTML_FL_MASK 0x3ffc0000 /* core-specific flags */
-#define SBTML_PE 0x40000000 /* pme enable */
-#define SBTML_BE 0x80000000 /* bist enable */
-
-/* sbtmstatehigh */
-#define SBTMH_SERR 0x1 /* serror */
-#define SBTMH_INT 0x2 /* interrupt */
-#define SBTMH_BUSY 0x4 /* busy */
-#define SBTMH_TO 0x00000020 /* timeout (sonics >= 2.3) */
-#define SBTMH_FL_MASK 0x0fff0000 /* core-specific flags */
-#define SBTMH_DMA64 0x10000000 /* supports DMA with 64-bit addresses */
-#define SBTMH_GCR 0x20000000 /* gated clock request */
-#define SBTMH_BISTF 0x40000000 /* bist failed */
-#define SBTMH_BISTD 0x80000000 /* bist done */
-
-
-/* sbbwa0 */
-#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */
-#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */
-#define SBBWA_TAB1_SHIFT 16
-
-/* sbimconfiglow */
-#define SBIMCL_STO_MASK 0x7 /* service timeout */
-#define SBIMCL_RTO_MASK 0x70 /* request timeout */
-#define SBIMCL_RTO_SHIFT 4
-#define SBIMCL_CID_MASK 0xff0000 /* connection id */
-#define SBIMCL_CID_SHIFT 16
-
-/* sbimconfighigh */
-#define SBIMCH_IEM_MASK 0xc /* inband error mode */
-#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */
-#define SBIMCH_TEM_SHIFT 4
-#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */
-#define SBIMCH_BEM_SHIFT 6
-
-/* sbadmatch0 */
-#define SBAM_TYPE_MASK 0x3 /* address type */
-#define SBAM_AD64 0x4 /* reserved */
-#define SBAM_ADINT0_MASK 0xf8 /* type0 size */
-#define SBAM_ADINT0_SHIFT 3
-#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */
-#define SBAM_ADINT1_SHIFT 3
-#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */
-#define SBAM_ADINT2_SHIFT 3
-#define SBAM_ADEN 0x400 /* enable */
-#define SBAM_ADNEG 0x800 /* negative decode */
-#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */
-#define SBAM_BASE0_SHIFT 8
-#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */
-#define SBAM_BASE1_SHIFT 12
-#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */
-#define SBAM_BASE2_SHIFT 16
-
-/* sbtmconfiglow */
-#define SBTMCL_CD_MASK 0xff /* clock divide */
-#define SBTMCL_CO_MASK 0xf800 /* clock offset */
-#define SBTMCL_CO_SHIFT 11
-#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */
-#define SBTMCL_IF_SHIFT 18
-#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */
-#define SBTMCL_IM_SHIFT 24
-
-/* sbtmconfighigh */
-#define SBTMCH_BM_MASK 0x3 /* busy mode */
-#define SBTMCH_RM_MASK 0x3 /* retry mode */
-#define SBTMCH_RM_SHIFT 2
-#define SBTMCH_SM_MASK 0x30 /* stop mode */
-#define SBTMCH_SM_SHIFT 4
-#define SBTMCH_EM_MASK 0x300 /* sb error mode */
-#define SBTMCH_EM_SHIFT 8
-#define SBTMCH_IM_MASK 0xc00 /* int mode */
-#define SBTMCH_IM_SHIFT 10
-
-/* sbbconfig */
-#define SBBC_LAT_MASK 0x3 /* sb latency */
-#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */
-#define SBBC_MAX0_SHIFT 16
-#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */
-#define SBBC_MAX1_SHIFT 20
-
-/* sbbstate */
-#define SBBS_SRD 0x1 /* st reg disable */
-#define SBBS_HRD 0x2 /* hold reg disable */
-
-/* sbidlow */
-#define SBIDL_CS_MASK 0x3 /* config space */
-#define SBIDL_AR_MASK 0x38 /* # address ranges supported */
-#define SBIDL_AR_SHIFT 3
-#define SBIDL_SYNCH 0x40 /* sync */
-#define SBIDL_INIT 0x80 /* initiator */
-#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */
-#define SBIDL_MINLAT_SHIFT 8
-#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */
-#define SBIDL_MAXLAT_SHIFT 12
-#define SBIDL_FIRST 0x10000 /* this initiator is first */
-#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */
-#define SBIDL_CW_SHIFT 18
-#define SBIDL_TP_MASK 0xf00000 /* target ports */
-#define SBIDL_TP_SHIFT 20
-#define SBIDL_IP_MASK 0xf000000 /* initiator ports */
-#define SBIDL_IP_SHIFT 24
-#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */
-#define SBIDL_RV_SHIFT 28
-#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */
-#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */
-
-/* sbidhigh */
-#define SBIDH_RC_MASK 0x000f /* revision code */
-#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */
-#define SBIDH_RCE_SHIFT 8
-#define SBCOREREV(sbidh) \
- ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
-#define SBIDH_CC_MASK 0x8ff0 /* core code */
-#define SBIDH_CC_SHIFT 4
-#define SBIDH_VC_MASK 0xffff0000 /* vendor code */
-#define SBIDH_VC_SHIFT 16
-
-#define SB_COMMIT 0xfd8 /* update buffered registers value */
-
-/* vendor codes */
-#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */
-
-/* core codes */
-#define SB_NODEV 0x700 /* Invalid coreid */
-#define SB_CC 0x800 /* chipcommon core */
-#define SB_ILINE20 0x801 /* iline20 core */
-#define SB_SDRAM 0x803 /* sdram core */
-#define SB_PCI 0x804 /* pci core */
-#define SB_MIPS 0x805 /* mips core */
-#define SB_ENET 0x806 /* enet mac core */
-#define SB_CODEC 0x807 /* v90 codec core */
-#define SB_USB 0x808 /* usb 1.1 host/device core */
-#define SB_ADSL 0x809 /* ADSL core */
-#define SB_ILINE100 0x80a /* iline100 core */
-#define SB_IPSEC 0x80b /* ipsec core */
-#define SB_PCMCIA 0x80d /* pcmcia core */
-#define SB_SOCRAM 0x80e /* internal memory core */
-#define SB_MEMC 0x80f /* memc sdram core */
-#define SB_EXTIF 0x811 /* external interface core */
-#define SB_D11 0x812 /* 802.11 MAC core */
-#define SB_MIPS33 0x816 /* mips3302 core */
-#define SB_USB11H 0x817 /* usb 1.1 host core */
-#define SB_USB11D 0x818 /* usb 1.1 device core */
-#define SB_USB20H 0x819 /* usb 2.0 host core */
-#define SB_USB20D 0x81a /* usb 2.0 device core */
-#define SB_SDIOH 0x81b /* sdio host core */
-#define SB_ROBO 0x81c /* roboswitch core */
-#define SB_ATA100 0x81d /* parallel ATA core */
-#define SB_SATAXOR 0x81e /* serial ATA & XOR DMA core */
-#define SB_GIGETH 0x81f /* gigabit ethernet core */
-#define SB_PCIE 0x820 /* pci express core */
-#define SB_MIMO 0x821 /* MIMO phy core */
-#define SB_SRAMC 0x822 /* SRAM controller core */
-#define SB_MINIMAC 0x823 /* MINI MAC/phy core */
-#define SB_ARM7S 0x825 /* ARM7tdmi-s core */
-#define SB_SDIOD 0x829 /* SDIO device core */
-#define SB_ARMCM3 0x82a /* ARM Cortex M3 core */
-#define SB_OCP 0x830 /* OCP2OCP bridge core */
-#define SB_SC 0x831 /* shared common core */
-#define SB_AHB 0x832 /* OCP2AHB bridge core */
-
-#define SB_CC_IDX 0 /* chipc, when present, is always core 0 */
-
-/* Not an enumeration space register, but common to all cores to
- * communicate w/PMU regarding Silicon Backplane clocking.
- */
-#define SB_CLK_CTL_ST 0x1e0 /* clock control and status */
-
-/* clk_ctl_st register */
-#define CCS_FORCEALP 0x00000001 /* force ALP request */
-#define CCS_FORCEHT 0x00000002 /* force HT request */
-#define CCS_FORCEILP 0x00000004 /* force ILP request */
-#define CCS_ALPAREQ 0x00000008 /* ALP Avail Request */
-#define CCS_HTAREQ 0x00000010 /* HT Avail Request */
-#define CCS_FORCEHWREQOFF 0x00000020 /* Force HW Clock Request Off */
-#define CCS_ALPAVAIL 0x00010000 /* ALP is available */
-#define CCS_HTAVAIL 0x00020000 /* HT is available */
-#define CCS0_HTAVAIL 0x00010000 /* HT avail in chipc and pcmcia on 4328a0 */
-#define CCS0_ALPAVAIL 0x00020000 /* ALP avail in chipc and pcmcia on 4328a0 */
-
-/* Not really related to Silicon Backplane, but a couple of software
- * conventions for the use the flash space:
- */
-
-/* Minumum amount of flash we support */
-#define FLASH_MIN 0x00020000 /* Minimum flash size */
-
-/* A boot/binary may have an embedded block that describes its size */
-#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */
-#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */
-#define BISZ_MAGIC_IDX 0 /* Word 0: magic */
-#define BISZ_TXTST_IDX 1 /* 1: text start */
-#define BISZ_TXTEND_IDX 2 /* 2: text end */
-#define BISZ_DATAST_IDX 3 /* 3: data start */
-#define BISZ_DATAEND_IDX 4 /* 4: data end */
-#define BISZ_BSSST_IDX 5 /* 5: bss start */
-#define BISZ_BSSEND_IDX 6 /* 6: bss end */
-#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */
-
-#endif /* _SBCONFIG_H */
+++ /dev/null
-/*
- * Hardware-specific External Interface I/O core definitions
- * for the BCM47xx family of SiliconBackplane-based chips.
- *
- * The External Interface core supports a total of three external chip selects
- * supporting external interfaces. One of the external chip selects is
- * used for Flash, one is used for PCMCIA, and the other may be
- * programmed to support either a synchronous interface or an
- * asynchronous interface. The asynchronous interface can be used to
- * support external devices such as UARTs and the BCM2019 Bluetooth
- * baseband processor.
- * The external interface core also contains 2 on-chip 16550 UARTs, clock
- * frequency control, a watchdog interrupt timer, and a GPIO interface.
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _SBEXTIF_H
-#define _SBEXTIF_H
-
-/* external interface address space */
-#define EXTIF_PCMCIA_MEMBASE(x) (x)
-#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000)
-#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000)
-#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000)
-#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000)
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define _PADLINE(line) pad ## line
-#define _XSTR(line) _PADLINE(line)
-#define PAD _XSTR(__LINE__)
-#endif /* PAD */
-
-/*
- * The multiple instances of output and output enable registers
- * are present to allow driver software for multiple cores to control
- * gpio outputs without needing to share a single register pair.
- */
-struct gpiouser {
- uint32 out;
- uint32 outen;
-};
-#define NGPIOUSER 5
-
-typedef volatile struct {
- uint32 corecontrol;
- uint32 extstatus;
- uint32 PAD[2];
-
- /* pcmcia control registers */
- uint32 pcmcia_config;
- uint32 pcmcia_memwait;
- uint32 pcmcia_attrwait;
- uint32 pcmcia_iowait;
-
- /* programmable interface control registers */
- uint32 prog_config;
- uint32 prog_waitcount;
-
- /* flash control registers */
- uint32 flash_config;
- uint32 flash_waitcount;
- uint32 PAD[4];
-
- uint32 watchdog;
-
- /* clock control */
- uint32 clockcontrol_n;
- uint32 clockcontrol_sb;
- uint32 clockcontrol_pci;
- uint32 clockcontrol_mii;
- uint32 PAD[3];
-
- /* gpio */
- uint32 gpioin;
- struct gpiouser gpio[NGPIOUSER];
- uint32 PAD;
- uint32 ejtagouten;
- uint32 gpiointpolarity;
- uint32 gpiointmask;
- uint32 PAD[153];
-
- uint8 uartdata;
- uint8 PAD[3];
- uint8 uartimer;
- uint8 PAD[3];
- uint8 uartfcr;
- uint8 PAD[3];
- uint8 uartlcr;
- uint8 PAD[3];
- uint8 uartmcr;
- uint8 PAD[3];
- uint8 uartlsr;
- uint8 PAD[3];
- uint8 uartmsr;
- uint8 PAD[3];
- uint8 uartscratch;
- uint8 PAD[3];
-} extifregs_t;
-
-/* corecontrol */
-#define CC_UE (1 << 0) /* uart enable */
-
-/* extstatus */
-#define ES_EM (1 << 0) /* endian mode (ro) */
-#define ES_EI (1 << 1) /* external interrupt pin (ro) */
-#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */
-
-/* gpio bit mask */
-#define GPIO_BIT0 (1 << 0)
-#define GPIO_BIT1 (1 << 1)
-#define GPIO_BIT2 (1 << 2)
-#define GPIO_BIT3 (1 << 3)
-#define GPIO_BIT4 (1 << 4)
-#define GPIO_BIT5 (1 << 5)
-#define GPIO_BIT6 (1 << 6)
-#define GPIO_BIT7 (1 << 7)
-
-
-/* pcmcia/prog/flash_config */
-#define CF_EN (1 << 0) /* enable */
-#define CF_EM_MASK 0xe /* mode */
-#define CF_EM_SHIFT 1
-#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */
-#define CF_EM_SYNC 0x2 /* synchronous mode */
-#define CF_EM_PCMCIA 0x4 /* pcmcia mode */
-#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */
-#define CF_BS (1 << 5) /* byteswap */
-#define CF_CD_MASK 0xc0 /* clock divider */
-#define CF_CD_SHIFT 6
-#define CF_CD_DIV2 0x0 /* backplane/2 */
-#define CF_CD_DIV3 0x40 /* backplane/3 */
-#define CF_CD_DIV4 0x80 /* backplane/4 */
-#define CF_CE (1 << 8) /* clock enable */
-#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */
-
-/* pcmcia_memwait */
-#define PM_W0_MASK 0x3f /* waitcount0 */
-#define PM_W1_MASK 0x1f00 /* waitcount1 */
-#define PM_W1_SHIFT 8
-#define PM_W2_MASK 0x1f0000 /* waitcount2 */
-#define PM_W2_SHIFT 16
-#define PM_W3_MASK 0x1f000000 /* waitcount3 */
-#define PM_W3_SHIFT 24
-
-/* pcmcia_attrwait */
-#define PA_W0_MASK 0x3f /* waitcount0 */
-#define PA_W1_MASK 0x1f00 /* waitcount1 */
-#define PA_W1_SHIFT 8
-#define PA_W2_MASK 0x1f0000 /* waitcount2 */
-#define PA_W2_SHIFT 16
-#define PA_W3_MASK 0x1f000000 /* waitcount3 */
-#define PA_W3_SHIFT 24
-
-/* prog_waitcount */
-#define PW_W0_MASK 0x0000001f /* waitcount0 */
-#define PW_W1_MASK 0x00001f00 /* waitcount1 */
-#define PW_W1_SHIFT 8
-#define PW_W2_MASK 0x001f0000 /* waitcount2 */
-#define PW_W2_SHIFT 16
-#define PW_W3_MASK 0x1f000000 /* waitcount3 */
-#define PW_W3_SHIFT 24
-
-#define PW_W0 0x0000000c
-#define PW_W1 0x00000a00
-#define PW_W2 0x00020000
-#define PW_W3 0x01000000
-
-/* flash_waitcount */
-#define FW_W0_MASK 0x1f /* waitcount0 */
-#define FW_W1_MASK 0x1f00 /* waitcount1 */
-#define FW_W1_SHIFT 8
-#define FW_W2_MASK 0x1f0000 /* waitcount2 */
-#define FW_W2_SHIFT 16
-#define FW_W3_MASK 0x1f000000 /* waitcount3 */
-#define FW_W3_SHIFT 24
-
-/* watchdog */
-#define WATCHDOG_CLOCK 48000000 /* Hz */
-
-/* clockcontrol_n */
-#define CN_N1_MASK 0x3f /* n1 control */
-#define CN_N2_MASK 0x3f00 /* n2 control */
-#define CN_N2_SHIFT 8
-
-/* clockcontrol_sb/pci/mii */
-#define CC_M1_MASK 0x3f /* m1 control */
-#define CC_M2_MASK 0x3f00 /* m2 control */
-#define CC_M2_SHIFT 8
-#define CC_M3_MASK 0x3f0000 /* m3 control */
-#define CC_M3_SHIFT 16
-#define CC_MC_MASK 0x1f000000 /* mux control */
-#define CC_MC_SHIFT 24
-
-/* Clock control default values */
-#define CC_DEF_N 0x0009 /* Default values for bcm4710 */
-#define CC_DEF_100 0x04020011
-#define CC_DEF_33 0x11030011
-#define CC_DEF_25 0x11050011
-
-/* Clock control values for 125Mhz */
-#define CC_125_N 0x0802
-#define CC_125_M 0x04020009
-#define CC_125_M25 0x11090009
-#define CC_125_M33 0x11090005
-
-/* Clock control magic field values */
-#define CC_F6_2 0x02 /* A factor of 2 in */
-#define CC_F6_3 0x03 /* 6-bit fields like */
-#define CC_F6_4 0x05 /* N1, M1 or M3 */
-#define CC_F6_5 0x09
-#define CC_F6_6 0x11
-#define CC_F6_7 0x21
-
-#define CC_F5_BIAS 5 /* 5-bit fields get this added */
-
-#define CC_MC_BYPASS 0x08
-#define CC_MC_M1 0x04
-#define CC_MC_M1M2 0x02
-#define CC_MC_M1M2M3 0x01
-#define CC_MC_M1M3 0x11
-
-#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */
-
-#endif /* _SBEXTIF_H */
+++ /dev/null
-/*
- * Broadcom SiliconBackplane MIPS definitions
- *
- * SB MIPS cores are custom MIPS32 processors with SiliconBackplane
- * OCP interfaces. The CP0 processor ID is 0x00024000, where bits
- * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP
- * interface. The core revision is stored in the SB ID register in SB
- * configuration space.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _sbhndmips_h_
-#define _sbhndmips_h_
-
-#include <mipsinc.h>
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define _PADLINE(line) pad ## line
-#define _XSTR(line) _PADLINE(line)
-#define PAD _XSTR(__LINE__)
-#endif /* PAD */
-
-typedef volatile struct {
- uint32 corecontrol;
- uint32 PAD[2];
- uint32 biststatus;
- uint32 PAD[4];
- uint32 intstatus;
- uint32 intmask;
- uint32 timer;
-} mipsregs_t;
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-#endif /* _sbhndmips_h_ */
+++ /dev/null
-/*
- * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _SBMEMC_H
-#define _SBMEMC_H
-
-#ifdef _LANGUAGE_ASSEMBLY
-
-#define MEMC_CONTROL 0x00
-#define MEMC_CONFIG 0x04
-#define MEMC_REFRESH 0x08
-#define MEMC_BISTSTAT 0x0c
-#define MEMC_MODEBUF 0x10
-#define MEMC_BKCLS 0x14
-#define MEMC_PRIORINV 0x18
-#define MEMC_DRAMTIM 0x1c
-#define MEMC_INTSTAT 0x20
-#define MEMC_INTMASK 0x24
-#define MEMC_INTINFO 0x28
-#define MEMC_NCDLCTL 0x30
-#define MEMC_RDNCDLCOR 0x34
-#define MEMC_WRNCDLCOR 0x38
-#define MEMC_MISCDLYCTL 0x3c
-#define MEMC_DQSGATENCDL 0x40
-#define MEMC_SPARE 0x44
-#define MEMC_TPADDR 0x48
-#define MEMC_TPDATA 0x4c
-#define MEMC_BARRIER 0x50
-#define MEMC_CORE 0x54
-
-#else /* !_LANGUAGE_ASSEMBLY */
-
-/* Sonics side: MEMC core registers */
-typedef volatile struct sbmemcregs {
- uint32 control;
- uint32 config;
- uint32 refresh;
- uint32 biststat;
- uint32 modebuf;
- uint32 bkcls;
- uint32 priorinv;
- uint32 dramtim;
- uint32 intstat;
- uint32 intmask;
- uint32 intinfo;
- uint32 reserved1;
- uint32 ncdlctl;
- uint32 rdncdlcor;
- uint32 wrncdlcor;
- uint32 miscdlyctl;
- uint32 dqsgatencdl;
- uint32 spare;
- uint32 tpaddr;
- uint32 tpdata;
- uint32 barrier;
- uint32 core;
-} sbmemcregs_t;
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-/* MEMC Core Init values (OCP ID 0x80f) */
-
-/* For sdr: */
-#define MEMC_SD_CONFIG_INIT 0x00048000
-#define MEMC_SD_DRAMTIM2_INIT 0x000754d8
-#define MEMC_SD_DRAMTIM3_INIT 0x000754da
-#define MEMC_SD_RDNCDLCOR_INIT 0x00000000
-#define MEMC_SD_WRNCDLCOR_INIT 0x49351200
-#define MEMC_SD1_WRNCDLCOR_INIT 0x14500200 /* For corerev 1 (4712) */
-#define MEMC_SD_MISCDLYCTL_INIT 0x00061c1b
-#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416 /* For corerev 1 (4712) */
-#define MEMC_SD_CONTROL_INIT0 0x00000002
-#define MEMC_SD_CONTROL_INIT1 0x00000008
-#define MEMC_SD_CONTROL_INIT2 0x00000004
-#define MEMC_SD_CONTROL_INIT3 0x00000010
-#define MEMC_SD_CONTROL_INIT4 0x00000001
-#define MEMC_SD_MODEBUF_INIT 0x00000000
-#define MEMC_SD_REFRESH_INIT 0x0000840f
-
-
-/* This is for SDRM8X8X4 */
-#define MEMC_SDR_INIT 0x0008
-#define MEMC_SDR_MODE 0x32
-#define MEMC_SDR_NCDL 0x00020032
-#define MEMC_SDR1_NCDL 0x0002020f /* For corerev 1 (4712) */
-
-/* For ddr: */
-#define MEMC_CONFIG_INIT 0x00048000
-#define MEMC_DRAMTIM2_INIT 0x000754d8
-#define MEMC_DRAMTIM25_INIT 0x000754d9
-#define MEMC_RDNCDLCOR_INIT 0x00000000
-#define MEMC_RDNCDLCOR_SIMINIT 0xf6f6f6f6 /* For hdl sim */
-#define MEMC_WRNCDLCOR_INIT 0x49351200
-#define MEMC_1_WRNCDLCOR_INIT 0x14500200
-#define MEMC_DQSGATENCDL_INIT 0x00030000
-#define MEMC_MISCDLYCTL_INIT 0x21061c1b
-#define MEMC_1_MISCDLYCTL_INIT 0x21021400
-#define MEMC_NCDLCTL_INIT 0x00002001
-#define MEMC_CONTROL_INIT0 0x00000002
-#define MEMC_CONTROL_INIT1 0x00000008
-#define MEMC_MODEBUF_INIT0 0x00004000
-#define MEMC_CONTROL_INIT2 0x00000010
-#define MEMC_MODEBUF_INIT1 0x00000100
-#define MEMC_CONTROL_INIT3 0x00000010
-#define MEMC_CONTROL_INIT4 0x00000008
-#define MEMC_REFRESH_INIT 0x0000840f
-#define MEMC_CONTROL_INIT5 0x00000004
-#define MEMC_MODEBUF_INIT2 0x00000000
-#define MEMC_CONTROL_INIT6 0x00000010
-#define MEMC_CONTROL_INIT7 0x00000001
-
-
-/* This is for DDRM16X16X2 */
-#define MEMC_DDR_INIT 0x0009
-#define MEMC_DDR_MODE 0x62
-#define MEMC_DDR_NCDL 0x0005050a
-#define MEMC_DDR1_NCDL 0x00000a0a /* For corerev 1 (4712) */
-
-/* mask for sdr/ddr calibration registers */
-#define MEMC_RDNCDLCOR_RD_MASK 0x000000ff
-#define MEMC_WRNCDLCOR_WR_MASK 0x000000ff
-#define MEMC_DQSGATENCDL_G_MASK 0x000000ff
-
-/* masks for miscdlyctl registers */
-#define MEMC_MISC_SM_MASK 0x30000000
-#define MEMC_MISC_SM_SHIFT 28
-#define MEMC_MISC_SD_MASK 0x0f000000
-#define MEMC_MISC_SD_SHIFT 24
-
-/* hw threshhold for calculating wr/rd for sdr memc */
-#define MEMC_CD_THRESHOLD 128
-
-/* Low bit of init register says if memc is ddr or sdr */
-#define MEMC_CONFIG_DDR 0x00000001
-
-#endif /* _SBMEMC_H */
+++ /dev/null
-/*
- * HND SiliconBackplane PCI core hardware definitions.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _sbpci_h_
-#define _sbpci_h_
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define _PADLINE(line) pad ## line
-#define _XSTR(line) _PADLINE(line)
-#define PAD _XSTR(__LINE__)
-#endif
-
-/* Sonics side: PCI core and host control registers */
-typedef struct sbpciregs {
- uint32 control; /* PCI control */
- uint32 PAD[3];
- uint32 arbcontrol; /* PCI arbiter control */
- uint32 PAD[3];
- uint32 intstatus; /* Interrupt status */
- uint32 intmask; /* Interrupt mask */
- uint32 sbtopcimailbox; /* Sonics to PCI mailbox */
- uint32 PAD[9];
- uint32 bcastaddr; /* Sonics broadcast address */
- uint32 bcastdata; /* Sonics broadcast data */
- uint32 PAD[2];
- uint32 gpioin; /* ro: gpio input (>=rev2) */
- uint32 gpioout; /* rw: gpio output (>=rev2) */
- uint32 gpioouten; /* rw: gpio output enable (>= rev2) */
- uint32 gpiocontrol; /* rw: gpio control (>= rev2) */
- uint32 PAD[36];
- uint32 sbtopci0; /* Sonics to PCI translation 0 */
- uint32 sbtopci1; /* Sonics to PCI translation 1 */
- uint32 sbtopci2; /* Sonics to PCI translation 2 */
- uint32 PAD[189];
- uint32 pcicfg[4][64]; /* 0x400 - 0x7FF, PCI Cfg Space (>=rev8) */
- uint16 sprom[36]; /* SPROM shadow Area */
- uint32 PAD[46];
-} sbpciregs_t;
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-/* PCI control */
-#define PCI_RST_OE 0x01 /* When set, drives PCI_RESET out to pin */
-#define PCI_RST 0x02 /* Value driven out to pin */
-#define PCI_CLK_OE 0x04 /* When set, drives clock as gated by PCI_CLK out to pin */
-#define PCI_CLK 0x08 /* Gate for clock driven out to pin */
-
-/* PCI arbiter control */
-#define PCI_INT_ARB 0x01 /* When set, use an internal arbiter */
-#define PCI_EXT_ARB 0x02 /* When set, use an external arbiter */
-/* ParkID - for PCI corerev >= 8 */
-#define PCI_PARKID_MASK 0x1c /* Selects which agent is parked on an idle bus */
-#define PCI_PARKID_SHIFT 2
-#define PCI_PARKID_EXT0 0 /* External master 0 */
-#define PCI_PARKID_EXT1 1 /* External master 1 */
-#define PCI_PARKID_EXT2 2 /* External master 2 */
-#define PCI_PARKID_EXT3 3 /* External master 3 (rev >= 11) */
-#define PCI_PARKID_INT 3 /* Internal master (rev < 11) */
-#define PCI11_PARKID_INT 4 /* Internal master (rev >= 11) */
-#define PCI_PARKID_LAST 4 /* Last active master (rev < 11) */
-#define PCI11_PARKID_LAST 5 /* Last active master (rev >= 11) */
-
-/* Interrupt status/mask */
-#define PCI_INTA 0x01 /* PCI INTA# is asserted */
-#define PCI_INTB 0x02 /* PCI INTB# is asserted */
-#define PCI_SERR 0x04 /* PCI SERR# has been asserted (write one to clear) */
-#define PCI_PERR 0x08 /* PCI PERR# has been asserted (write one to clear) */
-#define PCI_PME 0x10 /* PCI PME# is asserted */
-
-/* (General) PCI/SB mailbox interrupts, two bits per pci function */
-#define MAILBOX_F0_0 0x100 /* function 0, int 0 */
-#define MAILBOX_F0_1 0x200 /* function 0, int 1 */
-#define MAILBOX_F1_0 0x400 /* function 1, int 0 */
-#define MAILBOX_F1_1 0x800 /* function 1, int 1 */
-#define MAILBOX_F2_0 0x1000 /* function 2, int 0 */
-#define MAILBOX_F2_1 0x2000 /* function 2, int 1 */
-#define MAILBOX_F3_0 0x4000 /* function 3, int 0 */
-#define MAILBOX_F3_1 0x8000 /* function 3, int 1 */
-
-/* Sonics broadcast address */
-#define BCAST_ADDR_MASK 0xff /* Broadcast register address */
-
-/* Sonics to PCI translation types */
-#define SBTOPCI0_MASK 0xfc000000
-#define SBTOPCI1_MASK 0xfc000000
-#define SBTOPCI2_MASK 0xc0000000
-#define SBTOPCI_MEM 0
-#define SBTOPCI_IO 1
-#define SBTOPCI_CFG0 2
-#define SBTOPCI_CFG1 3
-#define SBTOPCI_PREF 0x4 /* prefetch enable */
-#define SBTOPCI_BURST 0x8 /* burst enable */
-#define SBTOPCI_RC_MASK 0x30 /* read command (>= rev11) */
-#define SBTOPCI_RC_READ 0x00 /* memory read */
-#define SBTOPCI_RC_READLINE 0x10 /* memory read line */
-#define SBTOPCI_RC_READMULTI 0x20 /* memory read multiple */
-
-/* PCI core index in SROM shadow area */
-#define SRSH_PI_OFFSET 0 /* first word */
-#define SRSH_PI_MASK 0xf000 /* bit 15:12 */
-#define SRSH_PI_SHIFT 12 /* bit 15:12 */
-
-#endif /* _sbpci_h_ */
+++ /dev/null
-/*
- * BCM43XX SiliconBackplane PCIE core hardware definitions.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _SBPCIE_H
-#define _SBPCIE_H
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define _PADLINE(line) pad ## line
-#define _XSTR(line) _PADLINE(line)
-#define PAD _XSTR(__LINE__)
-#endif
-
-/* PCIE Enumeration space offsets */
-#define PCIE_CORE_CONFIG_OFFSET 0x0
-#define PCIE_FUNC0_CONFIG_OFFSET 0x400
-#define PCIE_FUNC1_CONFIG_OFFSET 0x500
-#define PCIE_FUNC2_CONFIG_OFFSET 0x600
-#define PCIE_FUNC3_CONFIG_OFFSET 0x700
-#define PCIE_SPROM_SHADOW_OFFSET 0x800
-#define PCIE_SBCONFIG_OFFSET 0xE00
-
-/* PCIE Bar0 Address Mapping. Each function maps 16KB config space */
-#define PCIE_DEV_BAR0_SIZE 0x4000
-#define PCIE_BAR0_WINMAPCORE_OFFSET 0x0
-#define PCIE_BAR0_EXTSPROM_OFFSET 0x1000
-#define PCIE_BAR0_PCIECORE_OFFSET 0x2000
-#define PCIE_BAR0_CCCOREREG_OFFSET 0x3000
-
-/* different register spaces to access thr'u pcie indirect access */
-#define PCIE_CONFIGREGS 1 /* Access to config space */
-#define PCIE_PCIEREGS 2 /* Access to pcie registers */
-
-/* SB side: PCIE core and host control registers */
-typedef struct sbpcieregs {
- uint32 PAD[3];
- uint32 biststatus; /* bist Status: 0x00C */
- uint32 gpiosel; /* PCIE gpio sel: 0x010 */
- uint32 gpioouten; /* PCIE gpio outen: 0x14 */
- uint32 PAD[4];
- uint32 sbtopcimailbox; /* sb to pcie mailbox: 0x028 */
- uint32 PAD[54];
- uint32 sbtopcie0; /* sb to pcie translation 0: 0x100 */
- uint32 sbtopcie1; /* sb to pcie translation 1: 0x104 */
- uint32 sbtopcie2; /* sb to pcie translation 2: 0x108 */
- uint32 PAD[4];
-
- /* pcie core supports in direct access to config space */
- uint32 configaddr; /* pcie config space access: Address field: 0x120 */
- uint32 configdata; /* pcie config space access: Data field: 0x124 */
-
- /* mdio access to serdes */
- uint32 mdiocontrol; /* controls the mdio access: 0x128 */
- uint32 mdiodata; /* Data to the mdio access: 0x12c */
-
- /* pcie protocol phy/dllp/tlp register indirect access mechanism */
- uint32 pcieindaddr; /* indirect access to the internal register: 0x130 */
- uint32 pcieinddata; /* Data to/from the internal regsiter: 0x134 */
-
- uint32 clkreqenctrl; /* >= rev 6, Clkreq rdma control : 0x138 */
- uint32 PAD[433];
- uint16 sprom[36]; /* SPROM shadow Area */
-} sbpcieregs_t;
-
-/* SB to PCIE translation masks */
-#define SBTOPCIE0_MASK 0xfc000000
-#define SBTOPCIE1_MASK 0xfc000000
-#define SBTOPCIE2_MASK 0xc0000000
-
-/* Access type bits (0:1) */
-#define SBTOPCIE_MEM 0
-#define SBTOPCIE_IO 1
-#define SBTOPCIE_CFG0 2
-#define SBTOPCIE_CFG1 3
-
-/* Prefetch enable bit 2 */
-#define SBTOPCIE_PF 4
-
-/* Write Burst enable for memory write bit 3 */
-#define SBTOPCIE_WR_BURST 8
-
-/* config access */
-#define CONFIGADDR_FUNC_MASK 0x7000
-#define CONFIGADDR_FUNC_SHF 12
-#define CONFIGADDR_REG_MASK 0x0FFF
-#define CONFIGADDR_REG_SHF 0
-
-/* PCIE protocol regs Indirect Address */
-#define PCIEADDR_PROT_MASK 0x300
-#define PCIEADDR_PROT_SHF 8
-#define PCIEADDR_PL_TLP 0
-#define PCIEADDR_PL_DLLP 1
-#define PCIEADDR_PL_PLP 2
-
-/* PCIE protocol PHY diagnostic registers */
-#define PCIE_PLP_MODEREG 0x200 /* Mode */
-#define PCIE_PLP_STATUSREG 0x204 /* Status */
-#define PCIE_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */
-#define PCIE_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */
-#define PCIE_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */
-#define PCIE_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */
-#define PCIE_PLP_ATTNREG 0x218 /* Attention */
-#define PCIE_PLP_ATTNMASKREG 0x21C /* Attention Mask */
-#define PCIE_PLP_RXERRCTR 0x220 /* Rx Error */
-#define PCIE_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */
-#define PCIE_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */
-#define PCIE_PLP_TESTCTRLREG 0x22C /* Test Control reg */
-#define PCIE_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */
-#define PCIE_PLP_TIMINGOVRDREG 0x234 /* Timing param override */
-#define PCIE_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */
-#define PCIE_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */
-
-/* PCIE protocol DLLP diagnostic registers */
-#define PCIE_DLLP_LCREG 0x100 /* Link Control */
-#define PCIE_DLLP_LSREG 0x104 /* Link Status */
-#define PCIE_DLLP_LAREG 0x108 /* Link Attention */
-#define PCIE_DLLP_LAMASKREG 0x10C /* Link Attention Mask */
-#define PCIE_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */
-#define PCIE_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */
-#define PCIE_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */
-#define PCIE_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */
-#define PCIE_DLLP_LRREG 0x120 /* Link Replay */
-#define PCIE_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */
-#define PCIE_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */
-#define PCIE_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */
-#define PCIE_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */
-#define PCIE_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */
-#define PCIE_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */
-#define PCIE_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */
-#define PCIE_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */
-#define PCIE_DLLP_ERRCTRREG 0x144 /* Error Counter */
-#define PCIE_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */
-#define PCIE_DLLP_TESTREG 0x14C /* Test */
-#define PCIE_DLLP_PKTBIST 0x150 /* Packet BIST */
-#define PCIE_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */
-
-/* PCIE protocol TLP diagnostic registers */
-#define PCIE_TLP_CONFIGREG 0x000 /* Configuration */
-#define PCIE_TLP_WORKAROUNDSREG 0x004 /* TLP Workarounds */
-#define PCIE_TLP_WRDMAUPPER 0x010 /* Write DMA Upper Address */
-#define PCIE_TLP_WRDMALOWER 0x014 /* Write DMA Lower Address */
-#define PCIE_TLP_WRDMAREQ_LBEREG 0x018 /* Write DMA Len/ByteEn Req */
-#define PCIE_TLP_RDDMAUPPER 0x01C /* Read DMA Upper Address */
-#define PCIE_TLP_RDDMALOWER 0x020 /* Read DMA Lower Address */
-#define PCIE_TLP_RDDMALENREG 0x024 /* Read DMA Len Req */
-#define PCIE_TLP_MSIDMAUPPER 0x028 /* MSI DMA Upper Address */
-#define PCIE_TLP_MSIDMALOWER 0x02C /* MSI DMA Lower Address */
-#define PCIE_TLP_MSIDMALENREG 0x030 /* MSI DMA Len Req */
-#define PCIE_TLP_SLVREQLENREG 0x034 /* Slave Request Len */
-#define PCIE_TLP_FCINPUTSREQ 0x038 /* Flow Control Inputs */
-#define PCIE_TLP_TXSMGRSREQ 0x03C /* Tx StateMachine and Gated Req */
-#define PCIE_TLP_ADRACKCNTARBLEN 0x040 /* Address Ack XferCnt and ARB Len */
-#define PCIE_TLP_DMACPLHDR0 0x044 /* DMA Completion Hdr 0 */
-#define PCIE_TLP_DMACPLHDR1 0x048 /* DMA Completion Hdr 1 */
-#define PCIE_TLP_DMACPLHDR2 0x04C /* DMA Completion Hdr 2 */
-#define PCIE_TLP_DMACPLMISC0 0x050 /* DMA Completion Misc0 */
-#define PCIE_TLP_DMACPLMISC1 0x054 /* DMA Completion Misc1 */
-#define PCIE_TLP_DMACPLMISC2 0x058 /* DMA Completion Misc2 */
-#define PCIE_TLP_SPTCTRLLEN 0x05C /* Split Controller Req len */
-#define PCIE_TLP_SPTCTRLMSIC0 0x060 /* Split Controller Misc 0 */
-#define PCIE_TLP_SPTCTRLMSIC1 0x064 /* Split Controller Misc 1 */
-#define PCIE_TLP_BUSDEVFUNC 0x068 /* Bus/Device/Func */
-#define PCIE_TLP_RESETCTR 0x06C /* Reset Counter */
-#define PCIE_TLP_RTRYBUF 0x070 /* Retry Buffer value */
-#define PCIE_TLP_TGTDEBUG1 0x074 /* Target Debug Reg1 */
-#define PCIE_TLP_TGTDEBUG2 0x078 /* Target Debug Reg2 */
-#define PCIE_TLP_TGTDEBUG3 0x07C /* Target Debug Reg3 */
-#define PCIE_TLP_TGTDEBUG4 0x080 /* Target Debug Reg4 */
-
-/* MDIO control */
-#define MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */
-#define MDIOCTL_DIVISOR_VAL 0x2
-#define MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */
-#define MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */
-
-/* MDIO Data */
-#define MDIODATA_MASK 0x0000ffff /* data 2 bytes */
-#define MDIODATA_TA 0x00020000 /* Turnaround */
-#define MDIODATA_REGADDR_SHF 18 /* Regaddr shift */
-#define MDIODATA_REGADDR_MASK 0x003c0000 /* Regaddr Mask */
-#define MDIODATA_DEVADDR_SHF 22 /* Physmedia devaddr shift */
-#define MDIODATA_DEVADDR_MASK 0x0fc00000 /* Physmedia devaddr Mask */
-#define MDIODATA_WRITE 0x10000000 /* write Transaction */
-#define MDIODATA_READ 0x20000000 /* Read Transaction */
-#define MDIODATA_START 0x40000000 /* start of Transaction */
-
-/* MDIO devices (SERDES modules) */
-#define MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */
-#define MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
-#define MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
-
-/* SERDES RX registers */
-#define SERDES_RX_CTRL 1 /* Rx cntrl */
-#define SERDES_RX_TIMER1 2 /* Rx Timer1 */
-#define SERDES_RX_CDR 6 /* CDR */
-#define SERDES_RX_CDRBW 7 /* CDR BW */
-
-/* SERDES RX control register */
-#define SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */
-#define SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */
-
-/* SERDES PLL registers */
-#define SERDES_PLL_CTRL 1 /* PLL control reg */
-#define PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */
-
-#define PCIE_L1THRESHOLDTIME_MASK 0xFF00 /* bits 8 - 15 */
-#define PCIE_L1THRESHOLDTIME_SHIFT 8 /* PCIE_L1THRESHOLDTIME_SHIFT */
-#define PCIE_L1THRESHOLD_WARVAL 0x72 /* WAR value */
-
-/* SPROM offsets */
-#define SRSH_ASPM_OFFSET 4 /* word 4 */
-#define SRSH_ASPM_ENB 0x18 /* bit 3, 4 */
-#define SRSH_CLKREQ_OFFSET 20 /* word 20 */
-#define SRSH_CLKREQ_ENB 0x0800 /* bit 11 */
-
-/* Linkcontrol reg offset in PCIE Cap */
-#define PCIE_CAP_LINKCTRL_OFFSET 16 /* linkctrl offset in pcie cap */
-#define PCIE_CAP_LCREG_ASPML0s 0x01 /* ASPM L0s in linkctrl */
-#define PCIE_CAP_LCREG_ASPML1 0x02 /* ASPM L1 in linkctrl */
-#define PCIE_ASPM_ENAB 0x03 /* ASPM L0s & L1 in linkctrl */
-#define PCIE_CLKREQ_ENAB 0x100 /* CLKREQ Enab in linkctrl */
-
-/* Status reg PCIE_PLP_STATUSREG */
-#define PCIE_PLP_POLARITYINV_STAT 0x10
-
-#endif /* _SBPCIE_H */
+++ /dev/null
-/*
- * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _SBPCMCIA_H
-#define _SBPCMCIA_H
-
-
-/* All the addresses that are offsets in attribute space are divided
- * by two to account for the fact that odd bytes are invalid in
- * attribute space and our read/write routines make the space appear
- * as if they didn't exist. Still we want to show the original numbers
- * as documented in the hnd_pcmcia core manual.
- */
-
-/* PCMCIA Function Configuration Registers */
-#define PCMCIA_FCR (0x700 / 2)
-
-#define FCR0_OFF 0
-#define FCR1_OFF (0x40 / 2)
-#define FCR2_OFF (0x80 / 2)
-#define FCR3_OFF (0xc0 / 2)
-
-#define PCMCIA_FCR0 (0x700 / 2)
-#define PCMCIA_FCR1 (0x740 / 2)
-#define PCMCIA_FCR2 (0x780 / 2)
-#define PCMCIA_FCR3 (0x7c0 / 2)
-
-/* Standard PCMCIA FCR registers */
-
-#define PCMCIA_COR 0
-
-#define COR_RST 0x80
-#define COR_LEV 0x40
-#define COR_IRQEN 0x04
-#define COR_BLREN 0x01
-#define COR_FUNEN 0x01
-
-
-#define PCICIA_FCSR (2 / 2)
-#define PCICIA_PRR (4 / 2)
-#define PCICIA_SCR (6 / 2)
-#define PCICIA_ESR (8 / 2)
-
-
-#define PCM_MEMOFF 0x0000
-#define F0_MEMOFF 0x1000
-#define F1_MEMOFF 0x2000
-#define F2_MEMOFF 0x3000
-#define F3_MEMOFF 0x4000
-
-/* Memory base in the function fcr's */
-#define MEM_ADDR0 (0x728 / 2)
-#define MEM_ADDR1 (0x72a / 2)
-#define MEM_ADDR2 (0x72c / 2)
-
-/* PCMCIA base plus Srom access in fcr0: */
-#define PCMCIA_ADDR0 (0x072e / 2)
-#define PCMCIA_ADDR1 (0x0730 / 2)
-#define PCMCIA_ADDR2 (0x0732 / 2)
-
-#define MEM_SEG (0x0734 / 2)
-#define SROM_CS (0x0736 / 2)
-#define SROM_DATAL (0x0738 / 2)
-#define SROM_DATAH (0x073a / 2)
-#define SROM_ADDRL (0x073c / 2)
-#define SROM_ADDRH (0x073e / 2)
-#define SROM_INFO2 (0x0772 / 2) /* Corerev >= 2 && <= 5 */
-#define SROM_INFO (0x07be / 2) /* Corerev >= 6 */
-
-/* Values for srom_cs: */
-#define SROM_IDLE 0
-#define SROM_WRITE 1
-#define SROM_READ 2
-#define SROM_WEN 4
-#define SROM_WDS 7
-#define SROM_DONE 8
-
-/* Fields in srom_info: */
-#define SRI_SZ_MASK 0x03
-#define SRI_BLANK 0x04
-#define SRI_OTP 0x80
-
-/* CIS stuff */
-
-/* The CIS stops where the FCRs start */
-#define CIS_SIZE PCMCIA_FCR
-
-/* CIS tuple length field max */
-#define CIS_TUPLE_LEN_MAX 0xff
-
-/* Standard tuples we know about */
-
-#define CISTPL_VERS_1 0x15 /* CIS ver, manf, dev & ver strings */
-#define CISTPL_MANFID 0x20 /* Manufacturer and device id */
-#define CISTPL_FUNCID 0x21 /* Function identification */
-#define CISTPL_FUNCE 0x22 /* Function extensions */
-#define CISTPL_CFTABLE 0x1b /* Config table entry */
-#define CISTPL_END 0xff /* End of the CIS tuple chain */
-
-/* Function identifier provides context for the function extentions tuple */
-
-
-/* Function extensions for LANs */
-
-#define LAN_TECH 1 /* Technology type */
-#define LAN_SPEED 2 /* Raw bit rate */
-#define LAN_MEDIA 3 /* Transmission media */
-#define LAN_NID 4 /* Node identification (aka MAC addr) */
-#define LAN_CONN 5 /* Connector standard */
-
-
-/* CFTable */
-#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */
-#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */
-#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */
-
-/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
- * take one for HNBU, and use "extensions" (a la FUNCE) within it.
- */
-
-#define CISTPL_BRCM_HNBU 0x80
-
-/* Subtypes of BRCM_HNBU: */
-
-#define HNBU_SROMREV 0x00 /* A byte with sromrev, 1 if not present */
-#define HNBU_CHIPID 0x01 /* Two 16bit values: PCI vendor & device id */
-#define HNBU_BOARDREV 0x02 /* One byte board revision */
-#define HNBU_PAPARMS 0x03 /* PA parameters: 8 (sromrev == 1)
- * or 9 (sromrev > 1) bytes
- */
-#define HNBU_OEM 0x04 /* Eight bytes OEM data (sromrev == 1) */
-#define HNBU_CC 0x05 /* Default country code (sromrev == 1) */
-#define HNBU_AA 0x06 /* Antennas available */
-#define HNBU_AG 0x07 /* Antenna gain */
-#define HNBU_BOARDFLAGS 0x08 /* board flags (2 or 4 bytes) */
-#define HNBU_LEDS 0x09 /* LED set */
-#define HNBU_CCODE 0x0a /* Country code (2 bytes ascii + 1 byte cctl)
- * in rev 2
- */
-#define HNBU_CCKPO 0x0b /* 2 byte cck power offsets in rev 3 */
-#define HNBU_OFDMPO 0x0c /* 4 byte 11g ofdm power offsets in rev 3 */
-#define HNBU_GPIOTIMER 0x0d /* 2 bytes with on/off values in rev 3 */
-#define HNBU_PAPARMS5G 0x0e /* 5G PA params */
-#define HNBU_ANT5G 0x0f /* 4328 5G antennas available/gain */
-#define HNBU_RDLID 0x10 /* 2 byte USB remote downloader (RDL) product Id */
-#define HNBU_RSSISMBXA2G 0x11 /* 4328 2G RSSI mid pt sel & board switch arch,
- * 2 bytes, rev 3.
- */
-#define HNBU_RSSISMBXA5G 0x12 /* 4328 5G RSSI mid pt sel & board switch arch,
- * 2 bytes, rev 3.
- */
-#define HNBU_XTALFREQ 0x13 /* 4 byte Crystal frequency in kilohertz */
-#define HNBU_TRI2G 0x14 /* 4328 2G TR isolation, 1 byte */
-#define HNBU_TRI5G 0x15 /* 4328 5G TR isolation, 3 bytes */
-#define HNBU_RXPO2G 0x16 /* 4328 2G RX power offset, 1 byte */
-#define HNBU_RXPO5G 0x17 /* 4328 5G RX power offset, 1 byte */
-#define HNBU_BOARDNUM 0x18 /* board serial number, independent of mac addr */
-#define HNBU_MACADDR 0x19 /* mac addr override for the standard CIS LAN_NID */
-#define HNBU_RDLSN 0x1a /* 2 bytes; serial # advertised in USB descriptor */
-#define HNBU_BOARDTYPE 0x1b /* 2 bytes; boardtype */
-#define HNBU_RDLRNDIS 0x20 /* 1 byte; 1 = RDL advertises RNDIS config */
-#define HNBU_RDLRWU 0x30 /* 1 byte; 1 = RDL advertises Remote Wake-up */
-#define HNBU_SROM3SWRGN 0x80 /* 78 bytes; srom rev 3 s/w region without crc8
- * plus extra info appended.
- */
-
-/* sbtmstatelow */
-#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */
-#define SBTML_INT_EN 0x20000 /* enable sb interrupt */
-
-/* sbtmstatehigh */
-#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */
-
-#endif /* _SBPCMCIA_H */
+++ /dev/null
-/*
- * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _SBSDRAM_H
-#define _SBSDRAM_H
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-/* Sonics side: SDRAM core registers */
-typedef volatile struct sbsdramregs {
- uint32 initcontrol; /* Generates external SDRAM initialization sequence */
- uint32 config; /* Initializes external SDRAM mode register */
- uint32 refresh; /* Controls external SDRAM refresh rate */
- uint32 pad1;
- uint32 pad2;
-} sbsdramregs_t;
-
-#endif /* !_LANGUAGE_ASSEMBLY */
-
-/* SDRAM initialization control (initcontrol) register bits */
-#define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */
-#define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */
-#define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */
-#define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */
-#define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */
-#define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */
-#define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */
-#define SDRAM_RSVMb 0x0030 /* Use special SDRAM */
-#define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */
-#define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */
-#define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */
-#define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */
-#define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */
-
-/* SDRAM configuration (config) register bits */
-#define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */
-#define SDRAM_BURST8 0x0001 /* Use burst of 8 */
-#define SDRAM_BURST4 0x0002 /* Use burst of 4 */
-#define SDRAM_BURST2 0x0003 /* Use burst of 2 */
-#define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */
-#define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */
-
-/* SDRAM refresh control (refresh) register bits */
-#define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */
-#define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */
-
-/* SDRAM Core default Init values (OCP ID 0x803) */
-#define SDRAM_INIT MEM4MX16X2
-#define SDRAM_CONFIG SDRAM_BURSTFULL
-#define SDRAM_REFRESH SDRAM_REF(0x40)
-
-#define MEM1MX16 0x009 /* 2 MB */
-#define MEM1MX16X2 0x409 /* 4 MB */
-#define MEM2MX8X2 0x809 /* 4 MB */
-#define MEM2MX8X4 0xc09 /* 8 MB */
-#define MEM2MX32 0x439 /* 8 MB */
-#define MEM4MX16 0x019 /* 8 MB */
-#define MEM4MX16X2 0x419 /* 16 MB */
-#define MEM8MX8X2 0x819 /* 16 MB */
-#define MEM8MX16 0x829 /* 16 MB */
-#define MEM4MX32 0x429 /* 16 MB */
-#define MEM8MX8X4 0xc19 /* 32 MB */
-#define MEM8MX16X2 0xc29 /* 32 MB */
-
-#endif /* _SBSDRAM_H */
+++ /dev/null
-/*
- * BCM47XX Sonics SiliconBackplane embedded ram core
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _SBSOCRAM_H
-#define _SBSOCRAM_H
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define _PADLINE(line) pad ## line
-#define _XSTR(line) _PADLINE(line)
-#define PAD _XSTR(__LINE__)
-#endif /* PAD */
-
-/* Memcsocram core registers */
-typedef volatile struct sbsocramregs {
- uint32 coreinfo;
- uint32 bwalloc;
- uint32 PAD;
- uint32 biststat;
- uint32 bankidx;
- uint32 standbyctrl;
- uint32 PAD[116];
- uint32 pwrctl; /* corerev >= 2 */
-} sbsocramregs_t;
-
-#endif /* _LANGUAGE_ASSEMBLY */
-
-/* Register offsets */
-#define SR_COREINFO 0x00
-#define SR_BWALLOC 0x04
-#define SR_BISTSTAT 0x0c
-#define SR_BANKINDEX 0x10
-#define SR_BANKSTBYCTL 0x14
-#define SR_PWRCTL 0x1e8
-
-/* Coreinfo register */
-#define SRCI_PT_MASK 0x00030000
-#define SRCI_PT_SHIFT 16
-/* corerev >= 3 */
-#define SRCI_LSS_MASK 0x00f00000
-#define SRCI_LSS_SHIFT 20
-#define SRCI_LRS_MASK 0x0f000000
-#define SRCI_LRS_SHIFT 24
-
-/* In corerev 0, the memory size is 2 to the power of the
- * base plus 16 plus to the contents of the memsize field plus 1.
- */
-#define SRCI_MS0_MASK 0xf
-#define SR_MS0_BASE 16
-
-/*
- * In corerev 1 the bank size is 2 ^ the bank size field plus 14,
- * the memory size is number of banks times bank size.
- * The same applies to rom size.
- */
-#define SRCI_ROMNB_MASK 0xf000
-#define SRCI_ROMNB_SHIFT 12
-#define SRCI_ROMBSZ_MASK 0xf00
-#define SRCI_ROMBSZ_SHIFT 8
-#define SRCI_SRNB_MASK 0xf0
-#define SRCI_SRNB_SHIFT 4
-#define SRCI_SRBSZ_MASK 0xf
-#define SRCI_SRBSZ_SHIFT 0
-
-#define SR_BSZ_BASE 14
-
-/* Standby control register */
-#define SRSC_SBYOVR_MASK 0x80000000
-#define SRSC_SBYOVR_SHIFT 31
-#define SRSC_SBYOVRVAL_MASK 0x60000000
-#define SRSC_SBYOVRVAL_SHIFT 29
-
-#endif /* _SBSOCRAM_H */
+++ /dev/null
-/*
- * SPROM format definitions for the Broadcom 47xx and 43xx chip family.
- *
- * Copyright(c) 2002 Broadcom Corporation
- */
-
-#ifndef _SBSPROM_H
-#define _SBSPROM_H
-
-#include "typedefs.h"
-#include "bcmdevs.h"
-
-/* A word is this many bytes */
-#define SRW 2
-
-/* offset into PCI config space for write enable bit */
-#define CFG_SROM_WRITABLE_OFFSET 0x88
-#define SROM_WRITEABLE 0x10
-
-/* enumeration space consists of N contiguous 4Kbyte core register sets */
-#define SBCORES_BASE 0x18000000
-#define SBCORES_EACH 0x1000
-
-/* offset from BAR0 for srom space */
-#define SROM_BASE 4096
-
-/* number of 2-byte words in srom */
-#define SROM_SIZE 64
-
-#define SROM_BYTES (SROM_SIZE * SRW)
-
-#define MAX_FN 4
-
-/* Word 0, Hardware control */
-#define SROM_HWCTL 0
-#define HW_FUNMSK 0x000f
-#define HW_FCLK 0x0200
-#define HW_CBM 0x0400
-#define HW_PIMSK 0xf000
-#define HW_PISHIFT 12
-#define HW_4301PISHIFT 13
-#define HW_PI4402 0x2
-#define HW_FUN4401 0x0001
-#define HW_FCLK4402 0x0000
-
-/* Word 1, common-power/boot-rom */
-#define SROM_COMMPW 1
-/* boot rom present bit */
-#define BR_PRESSHIFT 8
-/* 15:9 for n; boot rom size is 2^(14 + n) bytes */
-#define BR_SIZESHIFT 9
-
-/* Word 2, SubsystemId */
-#define SROM_SSID 2
-
-/* Word 3, VendorId */
-#define SROM_VID 3
-
-/* Function 0 info, function info length */
-#define SROM_FN0 4
-#define SROM_FNSZ 8
-
-/* Within each function: */
-/* Word 0, deviceID */
-#define SRFN_DID 0
-
-/* Words 1-2, ClassCode */
-#define SRFN_CCL 1
-/* Word 2, D0 Power */
-#define SRFN_CCHD0 2
-
-/* Word 3, PME and D1D2D3 power */
-#define SRFN_PMED123 3
-
-#define PME_IL 0
-#define PME_ENET0 1
-#define PME_ENET1 2
-#define PME_CODEC 3
-
-#define PME_4402_ENET 0
-#define PME_4402_CODEC 1
-#define PME_4301_WL 2
-#define PMEREP_4402_ENET (PMERD3CV | PMERD3CA | PMERD3H | PMERD2 | PMERD1 | PMERD0 | PME)
-
-/* Word 4, Bar1 enable, pme reports */
-#define SRFN_B1PMER 4
-#define B1E 1
-#define B1SZMSK 0xe
-#define B1SZSH 1
-#define PMERMSK 0x0ff0
-#define PME 0x0010
-#define PMERD0 0x0020
-#define PMERD1 0x0040
-#define PMERD2 0x0080
-#define PMERD3H 0x0100
-#define PMERD3CA 0x0200
-#define PMERD3CV 0x0400
-#define IGNCLKRR 0x0800
-#define B0LMSK 0xf000
-
-/* Words 4-5, Bar0 Sonics value */
-#define SRFN_B0H 5
-/* Words 6-7, CIS Pointer */
-#define SRFN_CISL 6
-#define SRFN_CISH 7
-
-/* Words 36-38: iLine MAC address */
-#define SROM_I_MACHI 36
-#define SROM_I_MACMID 37
-#define SROM_I_MACLO 38
-
-/* Words 36-38: wireless0 MAC address on 43xx */
-#define SROM_W0_MACHI 36
-#define SROM_W0_MACMID 37
-#define SROM_W0_MACLO 38
-
-/* Words 39-41: enet0 MAC address */
-#define SROM_E0_MACHI 39
-#define SROM_E0_MACMID 40
-#define SROM_E0_MACLO 41
-
-/* Words 42-44: enet1 MAC address */
-#define SROM_E1_MACHI 42
-#define SROM_E1_MACMID 43
-#define SROM_E1_MACLO 44
-
-/* Words 42-44: wireless1 MAC address on 4309 */
-#define SROM_W1_MACHI 42
-#define SROM_W1_MACMID 43
-#define SROM_W1_MACLO 44
-
-#define SROM_EPHY 45
-
-/* Word 46: BdRev & Antennas0/1 & ccLock for 430x */
-#define SROM_REV_AA_LOCK 46
-
-/* Words 47-51 wl0 PA bx */
-#define SROM_WL0_PAB0 47
-#define SROM_WL0_PAB1 48
-#define SROM_WL0_PAB2 49
-#define SROM_WL0_PAB3 50
-#define SROM_WL0_PAB4 51
-
-/* Word 52: wl0/wl1 MaxPower */
-#define SROM_WL_MAXPWR 52
-
-/* Words 53-55 wl1 PA bx */
-#define SROM_WL1_PAB0 53
-#define SROM_WL1_PAB1 54
-#define SROM_WL1_PAB2 55
-
-/* Woprd 56: itt */
-#define SROM_ITT 56
-
-/* Words 59-62: OEM Space */
-#define SROM_WL_OEM 59
-#define SROM_OEM_SIZE 4
-
-/* Contents for the srom */
-
-#define BU4710_SSID 0x0400
-#define VSIM4710_SSID 0x0401
-#define QT4710_SSID 0x0402
-
-#define BU4610_SSID 0x0403
-#define VSIM4610_SSID 0x0404
-
-#define BU4307_SSID 0x0405
-#define BCM94301CB_SSID 0x0406
-#define BCM94301MP_SSID 0x0407
-#define BCM94307MP_SSID 0x0408
-#define AP4307_SSID 0x0409
-
-#define BU4309_SSID 0x040a
-#define BCM94309CB_SSID 0x040b
-#define BCM94309MP_SSID 0x040c
-#define AP4309_SSID 0x040d
-
-#define BU4402_SSID 0x4402
-
-#define CLASS_OTHER 0x8000
-#define CLASS_ETHER 0x0000
-#define CLASS_NET 0x0002
-#define CLASS_COMM 0x0007
-#define CLASS_MODEM 0x0300
-#define CLASS_MIPS 0x3000
-#define CLASS_PROC 0x000b
-#define CLASS_FLASH 0x0100
-#define CLASS_MEM 0x0005
-#define CLASS_SERIALBUS 0x000c
-#define CLASS_OHCI 0x0310
-
-/* Broadcom IEEE MAC addresses are 00:90:4c:xx:xx:xx */
-#define MACHI 0x90
-
-#define MACMID_BU4710I 0x4c17
-#define MACMID_BU4710E0 0x4c18
-#define MACMID_BU4710E1 0x4c19
-
-#define MACMID_94710R1I 0x4c1a
-#define MACMID_94710R1E0 0x4c1b
-#define MACMID_94710R1E1 0x4c1c
-
-#define MACMID_94710R4I 0x4c1d
-#define MACMID_94710R4E0 0x4c1e
-#define MACMID_94710R4E1 0x4c1f
-
-#define MACMID_94710DEVI 0x4c20
-#define MACMID_94710DEVE0 0x4c21
-#define MACMID_94710DEVE1 0x4c22
-
-#define MACMID_BU4402 0x4c23
-
-#define MACMID_BU4610I 0x4c24
-#define MACMID_BU4610E0 0x4c25
-#define MACMID_BU4610E1 0x4c26
-
-#define MACMID_BU4307W 0x4c27
-#define MACMID_BU4307E 0x4c28
-
-#define MACMID_94301CB 0x4c29
-
-#define MACMID_94301MP 0x4c2a
-
-#define MACMID_94307MPW 0x4c2b
-#define MACMID_94307MPE 0x4c2c
-
-#define MACMID_AP4307W 0x4c2d
-#define MACMID_AP4307E 0x4c2e
-
-#define MACMID_BU4309W0 0x4c2f
-#define MACMID_BU4309W1 0x4c30
-#define MACMID_BU4309E 0x4c31
-
-#define MACMID_94309CBW0 0x4c32
-#define MACMID_94309CBW1 0x4c33
-
-#define MACMID_94309MPW0 0x4c34
-#define MACMID_94309MPW1 0x4c35
-#define MACMID_94309MPE 0x4c36
-
-#define MACMID_BU4401 0x4c37
-
-/* Enet phy settings one or two singles or a dual */
-/* Bits 4-0 : MII address for enet0 (0x1f for not there */
-/* Bits 9-5 : MII address for enet1 (0x1f for not there */
-/* Bit 14 : Mdio for enet0 */
-/* Bit 15 : Mdio for enet1 */
-
-/* bu4710 with only one phy on enet1 with address 7: */
-#define SROM_EPHY_ONE 0x80ff
-
-/* bu4710 with two individual phys, at 6 and 7, */
-/* each mdio connected to its own mac: */
-#define SROM_EPHY_TWO 0x80e6
-
-/* bu4710 with a dual phy addresses 0 & 1, mdio-connected to enet0 */
-#define SROM_EPHY_DUAL 0x0001
-
-/* r1 board with a dual phy at 0, 1 (NOT swapped and mdc0 */
-#define SROM_EPHY_R1 0x0010
-
-/* r4 board with a single phy on enet0 at address 5 and a switch */
-/* chip on enet1 (speciall case: 0x1e */
-#define SROM_EPHY_R4 0x83e5
-
-/* 4402 uses an internal phy at phyaddr 1; want mdcport == coreunit == 0 */
-#define SROM_EPHY_INTERNAL 0x0001
-
-/* 4307 uses an external phy at phyaddr 0; want mdcport == coreunit == 0 */
-#define SROM_EPHY_ZERO 0x0000
-
-#define SROM_VERS 0x0001
-
-
-#endif /* _SBSPROM_H */
+++ /dev/null
-/*
- * Misc utility routines for accessing chip-specific features
- * of Broadcom HNBU SiliconBackplane-based chips.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _sbutils_h_
-#define _sbutils_h_
-
-/*
- * Data structure to export all chip specific common variables
- * public (read-only) portion of sbutils handle returned by
- * sb_attach()/sb_kattach()
-*/
-
-struct sb_pub {
-
- uint bustype; /* SB_BUS, PCI_BUS */
- uint buscoretype; /* SB_PCI, SB_PCMCIA, SB_PCIE */
- uint buscorerev; /* buscore rev */
- uint buscoreidx; /* buscore index */
- int ccrev; /* chip common core rev */
- uint32 cccaps; /* chip common capabilities */
- int pmurev; /* pmu core rev */
- uint32 pmucaps; /* pmu capabilities */
- uint boardtype; /* board type */
- uint boardvendor; /* board vendor */
- uint boardflags; /* board flags */
- uint chip; /* chip number */
- uint chiprev; /* chip revision */
- uint chippkg; /* chip package option */
- uint32 chipst; /* chip status */
- uint sonicsrev; /* sonics backplane rev */
- bool pr42780; /* whether PCIE 42780 WAR applies to this chip */
- bool pr32414; /* whether 432414 WAR applis to the chip */
-};
-
-typedef const struct sb_pub sb_t;
-
-/*
- * Many of the routines below take an 'sbh' handle as their first arg.
- * Allocate this by calling sb_attach(). Free it by calling sb_detach().
- * At any one time, the sbh is logically focused on one particular sb core
- * (the "current core").
- * Use sb_setcore() or sb_setcoreidx() to change the association to another core.
- */
-
-#define SB_OSH NULL /* Use for sb_kattach when no osh is available */
-
-/* exported externs */
-extern sb_t *sb_attach(uint pcidev, osl_t *osh, void *regs, uint bustype,
- void *sdh, char **vars, uint *varsz);
-extern sb_t *sb_kattach(osl_t *osh);
-extern void sb_detach(sb_t *sbh);
-extern uint sb_chip(sb_t *sbh);
-extern uint sb_chiprev(sb_t *sbh);
-extern uint sb_chipcrev(sb_t *sbh);
-extern uint sb_chippkg(sb_t *sbh);
-extern uint sb_pcirev(sb_t *sbh);
-extern bool sb_war16165(sb_t *sbh);
-extern uint sb_pcmciarev(sb_t *sbh);
-extern uint sb_boardvendor(sb_t *sbh);
-extern uint sb_boardtype(sb_t *sbh);
-extern uint sb_bus(sb_t *sbh);
-extern uint sb_buscoretype(sb_t *sbh);
-extern uint sb_buscorerev(sb_t *sbh);
-extern uint sb_corelist(sb_t *sbh, uint coreid[]);
-extern uint sb_coreid(sb_t *sbh);
-extern uint sb_flag(sb_t *sbh);
-extern uint sb_coreidx(sb_t *sbh);
-extern uint sb_coreunit(sb_t *sbh);
-extern uint sb_corevendor(sb_t *sbh);
-extern uint sb_corerev(sb_t *sbh);
-extern void *sb_osh(sb_t *sbh);
-extern void sb_setosh(sb_t *sbh, osl_t *osh);
-extern uint sb_corereg(sb_t *sbh, uint coreidx, uint regoff, uint mask, uint val);
-extern void *sb_coreregs(sb_t *sbh);
-extern uint32 sb_coreflags(sb_t *sbh, uint32 mask, uint32 val);
-extern void sb_coreflags_wo(sb_t *sbh, uint32 mask, uint32 val);
-extern uint32 sb_coreflagshi(sb_t *sbh, uint32 mask, uint32 val);
-extern bool sb_iscoreup(sb_t *sbh);
-extern uint sb_findcoreidx(sb_t *sbh, uint coreid, uint coreunit);
-extern void *sb_setcoreidx(sb_t *sbh, uint coreidx);
-extern void *sb_setcore(sb_t *sbh, uint coreid, uint coreunit);
-extern int sb_corebist(sb_t *sbh);
-extern void sb_commit(sb_t *sbh);
-extern uint32 sb_base(uint32 admatch);
-extern uint32 sb_size(uint32 admatch);
-extern void sb_core_reset(sb_t *sbh, uint32 bits, uint32 resetbits);
-extern void sb_core_tofixup(sb_t *sbh);
-extern void sb_core_disable(sb_t *sbh, uint32 bits);
-extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m);
-extern uint32 sb_clock(sb_t *sbh);
-extern uint32 sb_alp_clock(sb_t *sbh);
-extern void sb_pci_setup(sb_t *sbh, uint coremask);
-extern void sb_pcmcia_init(sb_t *sbh);
-extern void sb_watchdog(sb_t *sbh, uint ticks);
-extern void *sb_gpiosetcore(sb_t *sbh);
-extern uint32 sb_gpiocontrol(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-extern uint32 sb_gpioouten(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-extern uint32 sb_gpioout(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-extern uint32 sb_gpioin(sb_t *sbh);
-extern uint32 sb_gpiointpolarity(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-extern uint32 sb_gpiointmask(sb_t *sbh, uint32 mask, uint32 val, uint8 priority);
-extern uint32 sb_gpioled(sb_t *sbh, uint32 mask, uint32 val);
-extern uint32 sb_gpioreserve(sb_t *sbh, uint32 gpio_num, uint8 priority);
-extern uint32 sb_gpiorelease(sb_t *sbh, uint32 gpio_num, uint8 priority);
-extern uint32 sb_gpiopull(sb_t *sbh, bool updown, uint32 mask, uint32 val);
-extern uint32 sb_gpioevent(sb_t *sbh, uint regtype, uint32 mask, uint32 val);
-extern uint32 sb_gpio_int_enable(sb_t *sbh, bool enable);
-
-/* GPIO event handlers */
-typedef void (*gpio_handler_t)(uint32 stat, void *arg);
-
-extern void *sb_gpio_handler_register(sb_t *sbh, uint32 event,
- bool level, gpio_handler_t cb, void *arg);
-extern void sb_gpio_handler_unregister(sb_t *sbh, void* gpioh);
-extern void sb_gpio_handler_process(sb_t *sbh);
-
-extern void sb_clkctl_init(sb_t *sbh);
-extern uint16 sb_clkctl_fast_pwrup_delay(sb_t *sbh);
-extern bool sb_clkctl_clk(sb_t *sbh, uint mode);
-extern int sb_clkctl_xtal(sb_t *sbh, uint what, bool on);
-extern void sb_register_intr_callback(sb_t *sbh, void *intrsoff_fn, void *intrsrestore_fn,
- void *intrsenabled_fn, void *intr_arg);
-extern void sb_deregister_intr_callback(sb_t *sbh);
-extern uint32 sb_set_initiator_to(sb_t *sbh, uint32 to, uint idx);
-extern uint16 sb_d11_devid(sb_t *sbh);
-extern int sb_corepciid(sb_t *sbh, uint func, uint16 *pcivendor, uint16 *pcidevice,
- uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif,
- uint8 *pciheader);
-extern uint sb_pcie_readreg(void *sbh, void* arg1, uint offset);
-extern uint sb_pcie_writereg(sb_t *sbh, void *arg1, uint offset, uint val);
-extern uint32 sb_gpiotimerval(sb_t *sbh, uint32 mask, uint32 val);
-extern bool sb_backplane64(sb_t *sbh);
-extern void sb_btcgpiowar(sb_t *sbh);
-
-
-#if defined(BCMDBG_ASSERT)
-extern bool sb_taclear(sb_t *sbh);
-#endif
-
-#ifdef BCMDBG
-extern void sb_dump(sb_t *sbh, struct bcmstrbuf *b);
-extern void sb_dumpregs(sb_t *sbh, struct bcmstrbuf *b);
-extern void sb_view(sb_t *sbh);
-extern void sb_viewall(sb_t *sbh);
-extern void sb_clkctl_dump(sb_t *sbh, struct bcmstrbuf *b);
-extern uint8 sb_pcieL1plldown(sb_t *sbh);
-extern uint32 sb_pcielcreg(sb_t *sbh, uint32 mask, uint32 val);
-#endif
-
-extern bool sb_deviceremoved(sb_t *sbh);
-extern uint32 sb_socram_size(sb_t *sbh);
-
-/*
-* Build device path. Path size must be >= SB_DEVPATH_BUFSZ.
-* The returned path is NULL terminated and has trailing '/'.
-* Return 0 on success, nonzero otherwise.
-*/
-extern int sb_devpath(sb_t *sbh, char *path, int size);
-/* Read variable with prepending the devpath to the name */
-extern char *sb_getdevpathvar(sb_t *sbh, const char *name);
-extern int sb_getdevpathintvar(sb_t *sbh, const char *name);
-
-extern uint8 sb_pcieclkreq(sb_t *sbh, uint32 mask, uint32 val);
-extern void sb_war42780_clkreq(sb_t *sbh, bool clkreq);
-extern void sb_pci_sleep(sb_t *sbh);
-extern void sb_pci_down(sb_t *sbh);
-extern void sb_pci_up(sb_t *sbh);
-
-/* Wake-on-wireless-LAN (WOWL) */
-extern bool sb_pci_pmecap(sb_t *sbh);
-extern bool sb_pci_pmeclr(sb_t *sbh);
-extern void sb_pci_pmeen(sb_t *sbh);
-
-/* clkctl xtal what flags */
-#define XTAL 0x1 /* primary crystal oscillator (2050) */
-#define PLL 0x2 /* main chip pll */
-
-/* clkctl clk mode */
-#define CLK_FAST 0 /* force fast (pll) clock */
-#define CLK_DYNAMIC 2 /* enable dynamic clock control */
-
-
-/* GPIO usage priorities */
-#define GPIO_DRV_PRIORITY 0 /* Driver */
-#define GPIO_APP_PRIORITY 1 /* Application */
-#define GPIO_HI_PRIORITY 2 /* Highest priority. Ignore GPIO reservation */
-
-/* GPIO pull up/down */
-#define GPIO_PULLUP 0
-#define GPIO_PULLDN 1
-
-/* GPIO event regtype */
-#define GPIO_REGEVT 0 /* GPIO register event */
-#define GPIO_REGEVT_INTMSK 1 /* GPIO register event int mask */
-#define GPIO_REGEVT_INTPOL 2 /* GPIO register event int polarity */
-
-/* device path */
-#define SB_DEVPATH_BUFSZ 16 /* min buffer size in bytes */
-
-#endif /* _sbutils_h_ */
+++ /dev/null
-/*
- * Broadcom SiliconBackplane chipcommon serial flash interface
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _sflash_h_
-#define _sflash_h_
-
-#include <typedefs.h>
-#include <sbchipc.h>
-#include <sbutils.h>
-
-struct sflash {
- uint blocksize; /* Block size */
- uint numblocks; /* Number of blocks */
- uint32 type; /* Type */
- uint size; /* Total size in bytes */
-};
-
-/* Utility functions */
-extern int sflash_poll(sb_t *sbh, chipcregs_t *cc, uint offset);
-extern int sflash_read(sb_t *sbh, chipcregs_t *cc,
- uint offset, uint len, uchar *buf);
-extern int sflash_write(sb_t *sbh, chipcregs_t *cc,
- uint offset, uint len, const uchar *buf);
-extern int sflash_erase(sb_t *sbh, chipcregs_t *cc, uint offset);
-extern int sflash_commit(sb_t *sbh, chipcregs_t *cc,
- uint offset, uint len, const uchar *buf);
-extern struct sflash *sflash_init(sb_t *sbh, chipcregs_t *cc);
-
-#endif /* _sflash_h_ */
+++ /dev/null
-/*
- * TRX image file header format.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <typedefs.h>
-
-#define TRX_MAGIC 0x30524448 /* "HDR0" */
-#define TRX_VERSION 1 /* Version 1 */
-#define TRX_MAX_LEN 0x7A0000 /* Max length */
-#define TRX_NO_HEADER 1 /* Do not write TRX header */
-#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */
-#define TRX_MAX_OFFSET 3 /* Max number of individual files */
-
-struct trx_header {
- uint32 magic; /* "HDR0" */
- uint32 len; /* Length of file including header */
- uint32 crc32; /* 32-bit CRC from flag_version to end of file */
- uint32 flag_version; /* 0:15 flags, 16:31 version */
- uint32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
-};
-
-/* Compatibility */
-typedef struct trx_header TRXHDR, *PTRXHDR;
+++ /dev/null
-/*
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#ifndef _TYPEDEFS_H_
-#define _TYPEDEFS_H_
-
-
-/* Define 'SITE_TYPEDEFS' in the compile to include a site specific
- * typedef file "site_typedefs.h".
- *
- * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs"
- * section of this file makes inferences about the compile environment
- * based on defined symbols and possibly compiler pragmas.
- *
- * Following these two sections is the "Default Typedefs"
- * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is
- * defined. This section has a default set of typedefs and a few
- * proprocessor symbols (TRUE, FALSE, NULL, ...).
- */
-
-#ifdef SITE_TYPEDEFS
-
-/*
- * Site Specific Typedefs
- *
- */
-
-#include "site_typedefs.h"
-
-#else
-
-/*
- * Inferred Typedefs
- *
- */
-
-/* Infer the compile environment based on preprocessor symbols and pramas.
- * Override type definitions as needed, and include configuration dependent
- * header files to define types.
- */
-
-#ifdef __cplusplus
-
-#define TYPEDEF_BOOL
-#ifndef FALSE
-#define FALSE false
-#endif
-#ifndef TRUE
-#define TRUE true
-#endif
-
-#else /* ! __cplusplus */
-
-#if defined(_WIN32)
-
-#define TYPEDEF_BOOL
-typedef unsigned char bool; /* consistent w/BOOL */
-
-#endif /* _WIN32 */
-
-#endif /* ! __cplusplus */
-
-/* use the Windows ULONG_PTR type when compiling for 64 bit */
-#if defined(_WIN64) && !defined(EFI)
-#include <basetsd.h>
-#define TYPEDEF_UINTPTR
-typedef ULONG_PTR uintptr;
-#elif defined(__x86_64__)
-#define TYPEDEF_UINTPTR
-typedef unsigned long long int uintptr;
-#endif
-
-
-#if defined(_MINOSL_)
-#define _NEED_SIZE_T_
-#endif
-
-#if defined(EFI) && !defined(_WIN64)
-#define _NEED_SIZE_T_
-#endif
-
-#if defined(_NEED_SIZE_T_)
-typedef long unsigned int size_t;
-#endif
-
-#ifdef __DJGPP__
-typedef long unsigned int size_t;
-#endif /* __DJGPP__ */
-
-#ifdef _MSC_VER /* Microsoft C */
-#define TYPEDEF_INT64
-#define TYPEDEF_UINT64
-typedef signed __int64 int64;
-typedef unsigned __int64 uint64;
-#endif
-
-#if defined(MACOSX)
-#define TYPEDEF_BOOL
-#endif
-
-#if defined(__NetBSD__)
-#define TYPEDEF_ULONG
-#endif
-
-
-#ifdef linux
-#define TYPEDEF_UINT
-#define TYPEDEF_USHORT
-#define TYPEDEF_ULONG
-#ifdef __KERNEL__
-#include <linux/version.h>
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19))
-#define TYPEDEF_BOOL
-#endif /* >= 2.6.19 */
-#endif /* __KERNEL__ */
-#endif /* linux */
-
-#if !defined(linux) && !defined(_WIN32) && !defined(_CFE_) && \
- !defined(_HNDRTE_) && !defined(_MINOSL_) && !defined(__DJGPP__) && !defined(__IOPOS__)
-#define TYPEDEF_UINT
-#define TYPEDEF_USHORT
-#endif
-
-
-/* Do not support the (u)int64 types with strict ansi for GNU C */
-#if defined(__GNUC__) && defined(__STRICT_ANSI__)
-#define TYPEDEF_INT64
-#define TYPEDEF_UINT64
-#endif
-
-/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
- * for singned or unsigned
- */
-#if defined(__ICL)
-
-#define TYPEDEF_INT64
-
-#if defined(__STDC__)
-#define TYPEDEF_UINT64
-#endif
-
-#endif /* __ICL */
-
-#if !defined(_WIN32) && !defined(_CFE_) && !defined(_MINOSL_) && \
- !defined(__DJGPP__) && !defined(__IOPOS__)
-
-/* pick up ushort & uint from standard types.h */
-#if defined(linux) && defined(__KERNEL__)
-
-#include <linux/types.h> /* sys/types.h and linux/types.h are oil and water */
-
-#else
-
-#include <sys/types.h>
-
-#endif
-
-#endif
-
-#if defined(MACOSX)
-
-#ifdef __BIG_ENDIAN__
-#define IL_BIGENDIAN
-#else
-#ifdef IL_BIGENDIAN
-#error "IL_BIGENDIAN was defined for a little-endian compile"
-#endif
-#endif /* __BIG_ENDIAN__ */
-
-#if !defined(__cplusplus)
-
-#if defined(__i386__)
-typedef unsigned char bool;
-#else
-typedef unsigned int bool;
-#endif
-#define TYPE_BOOL 1
-enum {
- false = 0,
- true = 1
-};
-
-#if defined(KERNEL)
-#include <IOKit/IOTypes.h>
-#endif /* KERNEL */
-
-#endif /* __cplusplus */
-
-#endif /* MACOSX */
-
-
-/* use the default typedefs in the next section of this file */
-#define USE_TYPEDEF_DEFAULTS
-
-#endif /* SITE_TYPEDEFS */
-
-
-/*
- * Default Typedefs
- *
- */
-
-#ifdef USE_TYPEDEF_DEFAULTS
-#undef USE_TYPEDEF_DEFAULTS
-
-#ifndef TYPEDEF_BOOL
-typedef /* @abstract@ */ unsigned char bool;
-#endif
-
-/* define uchar, ushort, uint, ulong */
-
-#ifndef TYPEDEF_UCHAR
-typedef unsigned char uchar;
-#endif
-
-#ifndef TYPEDEF_USHORT
-typedef unsigned short ushort;
-#endif
-
-#ifndef TYPEDEF_UINT
-typedef unsigned int uint;
-#endif
-
-#ifndef TYPEDEF_ULONG
-typedef unsigned long ulong;
-#endif
-
-/* define [u]int8/16/32/64, uintptr */
-
-#ifndef TYPEDEF_UINT8
-typedef unsigned char uint8;
-#endif
-
-#ifndef TYPEDEF_UINT16
-typedef unsigned short uint16;
-#endif
-
-#ifndef TYPEDEF_UINT32
-typedef unsigned int uint32;
-#endif
-
-#ifndef TYPEDEF_UINT64
-typedef unsigned long long uint64;
-#endif
-
-#ifndef TYPEDEF_UINTPTR
-typedef unsigned int uintptr;
-#endif
-
-#ifndef TYPEDEF_INT8
-typedef signed char int8;
-#endif
-
-#ifndef TYPEDEF_INT16
-typedef signed short int16;
-#endif
-
-#ifndef TYPEDEF_INT32
-typedef signed int int32;
-#endif
-
-#ifndef TYPEDEF_INT64
-typedef signed long long int64;
-#endif
-
-/* define float32/64, float_t */
-
-#ifndef TYPEDEF_FLOAT32
-typedef float float32;
-#endif
-
-#ifndef TYPEDEF_FLOAT64
-typedef double float64;
-#endif
-
-/*
- * abstracted floating point type allows for compile time selection of
- * single or double precision arithmetic. Compiling with -DFLOAT32
- * selects single precision; the default is double precision.
- */
-
-#ifndef TYPEDEF_FLOAT_T
-
-#if defined(FLOAT32)
-typedef float32 float_t;
-#else /* default to double precision floating point */
-typedef float64 float_t;
-#endif
-
-#endif /* TYPEDEF_FLOAT_T */
-
-/* define macro values */
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef TRUE
-#define TRUE 1 /* TRUE */
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-#ifndef OFF
-#define OFF 0
-#endif
-
-#ifndef ON
-#define ON 1 /* ON = 1 */
-#endif
-
-#define AUTO (-1) /* Auto = -1 */
-
-/* define PTRSZ, INLINE */
-
-#ifndef PTRSZ
-#define PTRSZ sizeof(char*)
-#endif
-
-#ifndef INLINE
-
-#ifdef _MSC_VER
-
-#define INLINE __inline
-
-#elif defined(__GNUC__)
-
-#define INLINE __inline__
-
-#else
-
-#define INLINE
-
-#endif /* _MSC_VER */
-
-#endif /* INLINE */
-
-#undef TYPEDEF_BOOL
-#undef TYPEDEF_UCHAR
-#undef TYPEDEF_USHORT
-#undef TYPEDEF_UINT
-#undef TYPEDEF_ULONG
-#undef TYPEDEF_UINT8
-#undef TYPEDEF_UINT16
-#undef TYPEDEF_UINT32
-#undef TYPEDEF_UINT64
-#undef TYPEDEF_UINTPTR
-#undef TYPEDEF_INT8
-#undef TYPEDEF_INT16
-#undef TYPEDEF_INT32
-#undef TYPEDEF_INT64
-#undef TYPEDEF_FLOAT32
-#undef TYPEDEF_FLOAT64
-#undef TYPEDEF_FLOAT_T
-
-#endif /* USE_TYPEDEF_DEFAULTS */
-
-/*
- * Including the bcmdefs.h here, to make sure everyone including typedefs.h
- * gets this automatically
-*/
-#include "bcmdefs.h"
-
-#endif /* _TYPEDEFS_H_ */
+++ /dev/null
-/*
- * NVRAM variable manipulation (Linux kernel half)
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/bootmem.h>
-#include <linux/wrapper.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/mtd/mtd.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <typedefs.h>
-#include <osl.h>
-#include <bcmendian.h>
-#include <bcmnvram.h>
-#include <sbconfig.h>
-#include <sbchipc.h>
-#include <sbutils.h>
-#include <hndmips.h>
-#include <sflash.h>
-
-/* In BSS to minimize text size and page aligned so it can be mmap()-ed */
-static char nvram_buf[NVRAM_SPACE] __attribute__((aligned(PAGE_SIZE)));
-
-/* Global SB handle */
-extern void *bcm947xx_sbh;
-extern spinlock_t bcm947xx_sbh_lock;
-
-static int cfe_env;
-extern char *cfe_env_get(char *nv_buf, const char *name);
-
-/* Convenience */
-#define sbh bcm947xx_sbh
-#define sbh_lock bcm947xx_sbh_lock
-
-/* Probe for NVRAM header */
-static void __init
-early_nvram_init(void)
-{
- struct nvram_header *header;
- chipcregs_t *cc;
- struct sflash *info = NULL;
- int i;
- uint32 base, off, lim;
- u32 *src, *dst;
-
- if ((cc = sb_setcore(sbh, SB_CC, 0)) != NULL) {
- base = KSEG1ADDR(SB_FLASH2);
- switch (readl(&cc->capabilities) & CC_CAP_FLASH_MASK) {
- case PFLASH:
- lim = SB_FLASH2_SZ;
- break;
-
- case SFLASH_ST:
- case SFLASH_AT:
- if ((info = sflash_init(sbh,cc)) == NULL)
- return;
- lim = info->size;
- break;
-
- case FLASH_NONE:
- default:
- return;
- }
- } else {
- /* extif assumed, Stop at 4 MB */
- base = KSEG1ADDR(SB_FLASH1);
- lim = SB_FLASH1_SZ;
- }
-
- /* XXX: hack for supporting the CFE environment stuff on WGT634U */
- src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
- dst = (u32 *) nvram_buf;
- if ((lim == 0x02000000) && ((*src & 0xff00ff) == 0x000001)) {
- printk("early_nvram_init: WGT634U NVRAM found.\n");
-
- for (i = 0; i < 0x1ff0; i++) {
- if (*src == 0xFFFFFFFF)
- break;
- *dst++ = *src++;
- }
- cfe_env = 1;
- return;
- }
-
- off = FLASH_MIN;
- while (off <= lim) {
- /* Windowed flash access */
- header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE);
- if (header->magic == NVRAM_MAGIC)
- goto found;
- off <<= 1;
- }
-
- /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
- header = (struct nvram_header *) KSEG1ADDR(base + 4 * 1024);
- if (header->magic == NVRAM_MAGIC)
- goto found;
-
- header = (struct nvram_header *) KSEG1ADDR(base + 1 * 1024);
- if (header->magic == NVRAM_MAGIC)
- goto found;
-
- printk("early_nvram_init: NVRAM not found\n");
- return;
-
-found:
- src = (u32 *) header;
- dst = (u32 *) nvram_buf;
- for (i = 0; i < sizeof(struct nvram_header); i += 4)
- *dst++ = *src++;
- for (; i < header->len && i < NVRAM_SPACE; i += 4)
- *dst++ = ltoh32(*src++);
-}
-
-/* Early (before mm or mtd) read-only access to NVRAM */
-static char * __init
-early_nvram_get(const char *name)
-{
- char *var, *value, *end, *eq;
-
- if (!name)
- return NULL;
-
- /* Too early? */
- if (sbh == NULL)
- return NULL;
-
- if (!nvram_buf[0])
- early_nvram_init();
-
- if (cfe_env)
- return cfe_env_get(nvram_buf, name);
-
- /* Look for name=value and return value */
- var = &nvram_buf[sizeof(struct nvram_header)];
- end = nvram_buf + sizeof(nvram_buf) - 2;
- end[0] = end[1] = '\0';
- for (; *var; var = value + strlen(value) + 1) {
- if (!(eq = strchr(var, '=')))
- break;
- value = eq + 1;
- if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
- return value;
- }
-
- return NULL;
-}
-
-static int __init
-early_nvram_getall(char *buf, int count)
-{
- char *var, *end;
- int len = 0;
-
- /* Too early? */
- if (sbh == NULL)
- return -1;
-
- if (!nvram_buf[0])
- early_nvram_init();
-
- bzero(buf, count);
-
- /* Write name=value\0 ... \0\0 */
- var = &nvram_buf[sizeof(struct nvram_header)];
- end = nvram_buf + sizeof(nvram_buf) - 2;
- end[0] = end[1] = '\0';
- for (; *var; var += strlen(var) + 1) {
- if ((count - len) <= (strlen(var) + 1))
- break;
- len += sprintf(buf + len, "%s", var) + 1;
- }
-
- return 0;
-}
-
-
-char *
-nvram_get(const char *name)
-{
- return early_nvram_get(name);
-}
-
-int
-nvram_getall(char *buf, int count)
-{
- unsigned long flags;
- int ret;
-
- return early_nvram_getall(buf, count);
-}
-
-/*
- * Search the name=value vars for a specific one and return its value.
- * Returns NULL if not found.
- */
-char*
-getvar(char *vars, const char *name)
-{
- char *s;
- int len;
-
- len = strlen(name);
-
- /* first look in vars[] */
- for (s = vars; s && *s;) {
- /* CSTYLED */
- if ((memcmp(s, name, len) == 0) && (s[len] == '='))
- return (&s[len+1]);
-
- while (*s++);
- }
-
- /* then query nvram */
- return (nvram_get(name));
-}
-
-/*
- * Search the vars for a specific one and return its value as
- * an integer. Returns 0 if not found.
- */
-int
-getintvar(char *vars, const char *name)
-{
- char *val;
-
- if ((val = getvar(vars, name)) == NULL)
- return (0);
-
- return (simple_strtoul(val, NULL, 0));
-}
-
+++ /dev/null
-/*
- * Low-Level PCI and SB support for BCM47xx (Linux support code)
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/paccess.h>
-
-#include <typedefs.h>
-#include <osl.h>
-#include <sbconfig.h>
-#include <sbutils.h>
-#include <hndpci.h>
-#include <pcicfg.h>
-#include <bcmdevs.h>
-#include <bcmnvram.h>
-
-/* Global SB handle */
-extern sb_t *bcm947xx_sbh;
-extern spinlock_t bcm947xx_sbh_lock;
-
-/* Convenience */
-#define sbh bcm947xx_sbh
-#define sbh_lock bcm947xx_sbh_lock
-
-static int
-sbpci_read_config_byte(struct pci_dev *dev, int where, u8 *value)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&sbh_lock, flags);
- ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn), where, value, sizeof(*value));
- spin_unlock_irqrestore(&sbh_lock, flags);
- return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-}
-
-static int
-sbpci_read_config_word(struct pci_dev *dev, int where, u16 *value)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&sbh_lock, flags);
- ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn), where, value, sizeof(*value));
- spin_unlock_irqrestore(&sbh_lock, flags);
- return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-}
-
-static int
-sbpci_read_config_dword(struct pci_dev *dev, int where, u32 *value)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&sbh_lock, flags);
- ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn), where, value, sizeof(*value));
- spin_unlock_irqrestore(&sbh_lock, flags);
- return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-}
-
-static int
-sbpci_write_config_byte(struct pci_dev *dev, int where, u8 value)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&sbh_lock, flags);
- ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn), where, &value, sizeof(value));
- spin_unlock_irqrestore(&sbh_lock, flags);
- return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-}
-
-static int
-sbpci_write_config_word(struct pci_dev *dev, int where, u16 value)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&sbh_lock, flags);
- ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn), where, &value, sizeof(value));
- spin_unlock_irqrestore(&sbh_lock, flags);
- return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-}
-
-static int
-sbpci_write_config_dword(struct pci_dev *dev, int where, u32 value)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&sbh_lock, flags);
- ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn), where, &value, sizeof(value));
- spin_unlock_irqrestore(&sbh_lock, flags);
- return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pcibios_ops = {
- sbpci_read_config_byte,
- sbpci_read_config_word,
- sbpci_read_config_dword,
- sbpci_write_config_byte,
- sbpci_write_config_word,
- sbpci_write_config_dword
-};
-
-
-void __init
-pcibios_init(void)
-{
- ulong flags;
-
- if (!(sbh = sb_kattach(SB_OSH)))
- panic("sb_kattach failed");
- spin_lock_init(&sbh_lock);
-
- spin_lock_irqsave(&sbh_lock, flags);
- sbpci_init(sbh);
- spin_unlock_irqrestore(&sbh_lock, flags);
-
- set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000));
- mdelay(300); /* workaround for atheros cards */
-
- /* Scan the SB bus */
- pci_scan_bus(0, &pcibios_ops, NULL);
-
-}
-
-char * __init
-pcibios_setup(char *str)
-{
- if (!strncmp(str, "ban=", 4)) {
- sbpci_ban(simple_strtoul(str + 4, NULL, 0));
- return NULL;
- }
-
- return (str);
-}
-
-static u32 pci_iobase = 0x100;
-static u32 pci_membase = SB_PCI_DMA;
-static u32 pcmcia_membase = 0x40004000;
-
-void __init
-pcibios_fixup_bus(struct pci_bus *b)
-{
- struct list_head *ln;
- struct pci_dev *d;
- struct resource *res;
- int pos, size;
- u32 *base;
- u8 irq;
-
- printk("PCI: Fixing up bus %d\n", b->number);
-
- /* Fix up SB */
- if (b->number == 0) {
- for (ln = b->devices.next; ln != &b->devices; ln = ln->next) {
- d = pci_dev_b(ln);
- /* Fix up interrupt lines */
- pci_read_config_byte(d, PCI_INTERRUPT_LINE, &irq);
- d->irq = irq + 2;
- pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
- }
- }
-
- /* Fix up external PCI */
- else {
- for (ln = b->devices.next; ln != &b->devices; ln = ln->next) {
- d = pci_dev_b(ln);
- /* Fix up resource bases */
- for (pos = 0; pos < 6; pos++) {
- res = &d->resource[pos];
- base = (res->flags & IORESOURCE_IO) ? &pci_iobase : ((b->number == 2) ? &pcmcia_membase : &pci_membase);
- if (res->end) {
- size = res->end - res->start + 1;
- if (*base & (size - 1))
- *base = (*base + size) & ~(size - 1);
- res->start = *base;
- res->end = res->start + size - 1;
- *base += size;
- pci_write_config_dword(d,
- PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
- }
- /* Fix up PCI bridge BAR0 only */
- if (b->number == 1 && PCI_SLOT(d->devfn) == 0)
- break;
- }
- /* Fix up interrupt lines */
- if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))
- d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq;
- pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
- }
- }
-}
-
-unsigned int
-pcibios_assign_all_busses(void)
-{
- return 1;
-}
-
-void
-pcibios_align_resource(void *data, struct resource *res,
- unsigned long size, unsigned long align)
-{
-}
-
-int
-pcibios_enable_resources(struct pci_dev *dev)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- /* External PCI only */
- if (dev->bus->number == 0)
- return 0;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for (idx = 0; idx < 6; idx++) {
- r = &dev->resource[idx];
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- if (dev->resource[PCI_ROM_RESOURCE].start)
- cmd |= PCI_COMMAND_MEMORY;
- if (cmd != old_cmd) {
- printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-}
-
-int
-pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- ulong flags;
- uint coreidx;
- void *regs;
-
- /* External PCI device enable */
- if (dev->bus->number != 0)
- return pcibios_enable_resources(dev);
-
- /* These cores come out of reset enabled */
- if (dev->device == SB_MIPS ||
- dev->device == SB_MIPS33 ||
- dev->device == SB_EXTIF ||
- dev->device == SB_CC)
- return 0;
-
- spin_lock_irqsave(&sbh_lock, flags);
- coreidx = sb_coreidx(sbh);
- regs = sb_setcoreidx(sbh, PCI_SLOT(dev->devfn));
- if (!regs)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /*
- * The USB core requires a special bit to be set during core
- * reset to enable host (OHCI) mode. Resetting the SB core in
- * pcibios_enable_device() is a hack for compatibility with
- * vanilla usb-ohci so that it does not have to know about
- * SB. A driver that wants to use the USB core in device mode
- * should know about SB and should reset the bit back to 0
- * after calling pcibios_enable_device().
- */
- if (sb_coreid(sbh) == SB_USB) {
- printk(KERN_INFO "SB USB 1.1 init\n");
- sb_core_disable(sbh, sb_coreflags(sbh, 0, 0));
- sb_core_reset(sbh, 1 << 29, 0);
- }
- /*
- * USB 2.0 special considerations:
- *
- * 1. Since the core supports both OHCI and EHCI functions, it must
- * only be reset once.
- *
- * 2. In addition to the standard SB reset sequence, the Host Control
- * Register must be programmed to bring the USB core and various
- * phy components out of reset.
- */
- else if (sb_coreid(sbh) == SB_USB20H) {
-
- uint corerev = sb_corerev(sbh);
-
- printk(KERN_INFO "SB USB20H init\n");
- printk(KERN_INFO "SB COREREV: %d\n", corerev);
-
- if (!sb_iscoreup(sbh)) {
-
- printk(KERN_INFO "SB USB20H resetting\n");
-
- sb_core_reset(sbh, 0, 0);
- writel(0x7FF, (ulong)regs + 0x200);
- udelay(1);
- }
- /* PRxxxx: War for 5354 failures. */
- if (corerev == 1 || corerev == 2) {
- uint32 tmp;
-
- /* Change Flush control reg */
- tmp = readl((uintptr)regs + 0x400);
- tmp &= ~8;
- writel(tmp, (uintptr)regs + 0x400);
- tmp = readl((uintptr)regs + 0x400);
- printk(KERN_INFO "USB20H fcr: 0x%x\n", tmp);
-
- /* Change Shim control reg */
- tmp = readl((uintptr)regs + 0x304);
- tmp &= ~0x100;
- writel(tmp, (uintptr)regs + 0x304);
- tmp = readl((uintptr)regs + 0x304);
- printk(KERN_INFO "USB20H shim cr: 0x%x\n", tmp);
- }
-
- } else
- sb_core_reset(sbh, 0, 0);
-
- sb_setcoreidx(sbh, coreidx);
- spin_unlock_irqrestore(&sbh_lock, flags);
-
- return 0;
-}
-
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
- struct resource *res, int resource)
-{
- unsigned long where, size;
- u32 reg;
-
- /* External PCI only */
- if (dev->bus->number == 0)
- return;
-
- where = PCI_BASE_ADDRESS_0 + (resource * 4);
- size = res->end - res->start;
- pci_read_config_dword(dev, where, ®);
-
- if (dev->bus->number == 1)
- reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
- else
- reg = res->start;
-
- pci_write_config_dword(dev, where, reg);
-}
-
-static void __init
-quirk_sbpci_bridge(struct pci_dev *dev)
-{
- if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0)
- return;
-
- printk("PCI: Fixing up bridge\n");
-
- /* Enable PCI bridge bus mastering and memory space */
- pci_set_master(dev);
- pcibios_enable_resources(dev);
-
- /* Enable PCI bridge BAR1 prefetch and burst */
- pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3);
-}
-
-struct pci_fixup pcibios_fixups[] = {
- { PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, quirk_sbpci_bridge },
- { 0 }
-};
-
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as certain crappy BIOSes forget to set it properly.
- */
-unsigned int pcibios_max_latency = 255;
-
-void pcibios_set_master(struct pci_dev *dev)
-{
- u8 lat;
- pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
- if (lat < 16)
- lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
- else if (lat > pcibios_max_latency)
- lat = pcibios_max_latency;
- else
- return;
- printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-}
-
+++ /dev/null
-/*
- * Early initialization code for BCM94710 boards
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/bootinfo.h>
-
-void __init
-prom_init(int argc, const char **argv)
-{
- unsigned long mem;
- unsigned long max;
-
- mips_machgroup = MACH_GROUP_BRCM;
- mips_machtype = MACH_BCM947XX;
-
- /* Figure out memory size by finding aliases
- *
- * BCM47XX uses 128MB for addressing the ram, if the system contains
- * less that that amount of ram it remaps the ram more often into the
- * available space.
- * Accessing memory after 128MB will cause an exception.
- * max contains the biggest possible address supported by the platform.
- * If the method wants to try something above we assume 128MB ram.
- */
- max = ((unsigned long)(prom_init) | ((128 << 20) - 1));
- for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
- if (((unsigned long)(prom_init) + mem) > max) {
- mem = (128 << 20);
- printk("assume 128MB RAM\n");
- break;
- }
- if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
- *(unsigned long *)(prom_init))
- break;
- }
-
- add_memory_region(0, mem, BOOT_MEM_RAM);
-}
-
-void __init
-prom_free_prom_memory(void)
-{
-}
+++ /dev/null
-/*
- * BCM47XX Sonics SiliconBackplane MIPS core routines
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <typedefs.h>
-#include <bcmdefs.h>
-#include <osl.h>
-#include <sbutils.h>
-#include <bcmdevs.h>
-#include <bcmnvram.h>
-#include <sbconfig.h>
-#include <sbchipc.h>
-#include <sbextif.h>
-#include <sbmemc.h>
-#include <mipsinc.h>
-#include <sbhndmips.h>
-#include <hndcpu.h>
-#include <hndmips.h>
-
-/* sbipsflag register format, indexed by irq. */
-static const uint32 sbips_int_mask[] = {
- 0, /* placeholder */
- SBIPS_INT1_MASK,
- SBIPS_INT2_MASK,
- SBIPS_INT3_MASK,
- SBIPS_INT4_MASK
-};
-
-static const uint32 sbips_int_shift[] = {
- 0, /* placeholder */
- SBIPS_INT1_SHIFT,
- SBIPS_INT2_SHIFT,
- SBIPS_INT3_SHIFT,
- SBIPS_INT4_SHIFT
-};
-
-/*
- * Map SB cores sharing the MIPS hardware IRQ0 to virtual dedicated OS IRQs.
- * Per-port BSP code is required to provide necessary translations between
- * the shared MIPS IRQ and the virtual OS IRQs based on SB core flag.
- *
- * See sb_irq() for the mapping.
- */
-static uint shirq_map_base = 0;
-
-/* Returns the SB interrupt flag of the current core. */
-static uint32 sb_getflag(sb_t * sbh)
-{
- osl_t *osh;
- void *regs;
- sbconfig_t *sb;
-
- osh = sb_osh(sbh);
- regs = sb_coreregs(sbh);
- sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF);
-
- return (R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK);
-}
-
-/*
- * Returns the MIPS IRQ assignment of the current core. If unassigned,
- * 0 is returned.
- */
-uint sb_irq(sb_t * sbh)
-{
- osl_t *osh;
- uint idx;
- void *regs;
- sbconfig_t *sb;
- uint32 flag, sbipsflag;
- uint irq = 0;
-
- osh = sb_osh(sbh);
- flag = sb_getflag(sbh);
-
- idx = sb_coreidx(sbh);
-
- if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
- (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
- sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF);
-
- /* sbipsflag specifies which core is routed to interrupts 1 to 4 */
- sbipsflag = R_REG(osh, &sb->sbipsflag);
- for (irq = 1; irq <= 4; irq++) {
- if (((sbipsflag & sbips_int_mask[irq]) >>
- sbips_int_shift[irq]) == flag)
- break;
- }
- if (irq == 5)
- irq = 0;
- }
-
- sb_setcoreidx(sbh, idx);
-
- return irq;
-}
-
-/* Clears the specified MIPS IRQ. */
-static void BCMINITFN(sb_clearirq) (sb_t * sbh, uint irq) {
- osl_t *osh;
- void *regs;
- sbconfig_t *sb;
-
- osh = sb_osh(sbh);
-
- if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
- !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
- ASSERT(regs);
- sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF);
-
- if (irq == 0)
- W_REG(osh, &sb->sbintvec, 0);
- else
- OR_REG(osh, &sb->sbipsflag, sbips_int_mask[irq]);
-}
-
-/*
- * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
- * IRQ 0 may be assigned more than once.
- *
- * The old assignment to the specified core is removed first.
- */
-static void
-BCMINITFN(sb_setirq) (sb_t * sbh, uint irq, uint coreid, uint coreunit) {
- osl_t *osh;
- void *regs;
- sbconfig_t *sb;
- uint32 flag;
- uint oldirq;
-
- osh = sb_osh(sbh);
-
- regs = sb_setcore(sbh, coreid, coreunit);
- ASSERT(regs);
- flag = sb_getflag(sbh);
- oldirq = sb_irq(sbh);
- if (oldirq)
- sb_clearirq(sbh, oldirq);
-
- if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
- !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
- ASSERT(regs);
- sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF);
-
- if (!oldirq)
- AND_REG(osh, &sb->sbintvec, ~(1 << flag));
-
- if (irq == 0)
- OR_REG(osh, &sb->sbintvec, 1 << flag);
- else {
- flag <<= sbips_int_shift[irq];
- ASSERT(!(flag & ~sbips_int_mask[irq]));
- flag |= R_REG(osh, &sb->sbipsflag) & ~sbips_int_mask[irq];
- W_REG(osh, &sb->sbipsflag, flag);
- }
-}
-
-/*
- * Initializes clocks and interrupts. SB and NVRAM access must be
- * initialized prior to calling.
- *
- * 'shirqmap' enables virtual dedicated OS IRQ mapping if non-zero.
- */
-void BCMINITFN(sb_mips_init) (sb_t * sbh, uint shirqmap) {
- osl_t *osh;
- ulong hz, ns, tmp;
- extifregs_t *eir;
- chipcregs_t *cc;
- char *value;
- uint irq;
-
- osh = sb_osh(sbh);
-
- /* Figure out current SB clock speed */
- if ((hz = sb_clock(sbh)) == 0)
- hz = 100000000;
- ns = 1000000000 / hz;
-
- /* Setup external interface timing */
- if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
- /* Initialize extif so we can get to the LEDs and external UART */
- W_REG(osh, &eir->prog_config, CF_EN);
-
- /* Set timing for the flash */
- tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
- tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
- tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
- W_REG(osh, &eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
-
- /* Set programmable interface timing for external uart */
- tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
- tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
- tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
- tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
- W_REG(osh, &eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
- } else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
- /* Set timing for the flash */
- tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
- tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */
- tmp |= CEIL(120, ns); /* W0 = 120nS */
- if ((sb_corerev(sbh) < 9) || (sb_chip(sbh) == 0x5365))
- W_REG(osh, &cc->flash_waitcount, tmp);
-
- if ((sb_corerev(sbh) < 9) ||
- ((sb_chip(sbh) == BCM5350_CHIP_ID) && sb_chiprev(sbh) == 0)
- || (sb_chip(sbh) == 0x5365)) {
- W_REG(osh, &cc->pcmcia_memwait, tmp);
- }
-
- /* Save shared IRQ mapping base */
- shirq_map_base = shirqmap;
- }
-
- /* Chip specific initialization */
- switch (sb_chip(sbh)) {
- case BCM4710_CHIP_ID:
- /* Clear interrupt map */
- for (irq = 0; irq <= 4; irq++)
- sb_clearirq(sbh, irq);
- sb_setirq(sbh, 0, SB_CODEC, 0);
- sb_setirq(sbh, 0, SB_EXTIF, 0);
- sb_setirq(sbh, 2, SB_ENET, 1);
- sb_setirq(sbh, 3, SB_ILINE20, 0);
- sb_setirq(sbh, 4, SB_PCI, 0);
- ASSERT(eir);
- value = nvram_get("et0phyaddr");
- if (value && !strcmp(value, "31")) {
- /* Enable internal UART */
- W_REG(osh, &eir->corecontrol, CC_UE);
- /* Give USB its own interrupt */
- sb_setirq(sbh, 1, SB_USB, 0);
- } else {
- /* Disable internal UART */
- W_REG(osh, &eir->corecontrol, 0);
- /* Give Ethernet its own interrupt */
- sb_setirq(sbh, 1, SB_ENET, 0);
- sb_setirq(sbh, 0, SB_USB, 0);
- }
- break;
- case BCM5350_CHIP_ID:
- /* Clear interrupt map */
- for (irq = 0; irq <= 4; irq++)
- sb_clearirq(sbh, irq);
- sb_setirq(sbh, 0, SB_CC, 0);
- sb_setirq(sbh, 0, SB_MIPS33, 0);
- sb_setirq(sbh, 1, SB_D11, 0);
- sb_setirq(sbh, 2, SB_ENET, 0);
- sb_setirq(sbh, 3, SB_PCI, 0);
- sb_setirq(sbh, 4, SB_USB, 0);
- break;
- case BCM4785_CHIP_ID:
- /* Reassign PCI to irq 4 */
- sb_setirq(sbh, 4, SB_PCI, 0);
- break;
- }
-}
-
-uint32
-BCMINITFN(sb_cpu_clock)(sb_t *sbh)
-{
- extifregs_t *eir;
- chipcregs_t *cc;
- uint32 n, m;
- uint idx;
- uint32 pll_type, rate = 0;
-
- /* get index of the current core */
- idx = sb_coreidx(sbh);
- pll_type = PLL_TYPE1;
-
- /* switch to extif or chipc core */
- if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
- n = R_REG(osh, &eir->clockcontrol_n);
- m = R_REG(osh, &eir->clockcontrol_sb);
- } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
- /* 5354 chip uses a non programmable PLL of frequency 240MHz */
- if (sb_chip(sbh) == BCM5354_CHIP_ID) {
- rate = 240000000;
- goto out;
- }
- pll_type = R_REG(osh, &cc->capabilities) & CC_CAP_PLL_MASK;
- n = R_REG(osh, &cc->clockcontrol_n);
- if ((pll_type == PLL_TYPE2) ||
- (pll_type == PLL_TYPE4) ||
- (pll_type == PLL_TYPE6) || (pll_type == PLL_TYPE7))
- m = R_REG(osh, &cc->clockcontrol_m3);
- else if (pll_type == PLL_TYPE5) {
- rate = 200000000;
- goto out;
- } else if (pll_type == PLL_TYPE3) {
- if (sb_chip(sbh) == BCM5365_CHIP_ID) {
- rate = 200000000;
- goto out;
- }
- /* 5350 uses m2 to control mips */
- else
- m = R_REG(osh, &cc->clockcontrol_m2);
- } else
- m = R_REG(osh, &cc->clockcontrol_sb);
- } else
- goto out;
-
- /* calculate rate */
- if (sb_chip(sbh) == 0x5365)
- rate = 100000000;
- else
- rate = sb_clock_rate(pll_type, n, m);
-
- if (pll_type == PLL_TYPE6)
- rate = SB2MIPS_T6(rate);
-
- out:
- /* switch back to previous core */
- sb_setcoreidx(sbh, idx);
-
- return rate;
-}
-
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
-
-static void BCMINITFN(handler) (void) {
- __asm__(".set\tmips32\n\t" "ssnop\n\t" "ssnop\n\t"
- /* Disable interrupts */
- /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
- "mfc0 $15, $12\n\t"
- /* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */
- "li $14, -31746\n\t"
- "and $15, $15, $14\n\t"
- "mtc0 $15, $12\n\t" "eret\n\t" "nop\n\t" "nop\n\t"
- ".set\tmips0");
-}
-
-/* The following MUST come right after handler() */
-static void BCMINITFN(afterhandler) (void) {
-}
-
-/*
- * Set the MIPS, backplane and PCI clocks as closely as possible.
- *
- * MIPS clocks synchronization function has been moved from PLL in chipcommon
- * core rev. 15 to a DLL inside the MIPS core in 4785.
- */
-bool
-BCMINITFN(sb_mips_setclock) (sb_t * sbh, uint32 mipsclock, uint32 sbclock,
- uint32 pciclock) {
- extifregs_t *eir = NULL;
- chipcregs_t *cc = NULL;
- mipsregs_t *mipsr = NULL;
- volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci,
- *clockcontrol_m2;
- uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm,
- orig_ratio_cfg;
- uint32 pll_type, sync_mode;
- uint ic_size, ic_lsize;
- uint idx, i;
-
- /* PLL configuration: type 1 */
- typedef struct {
- uint32 mipsclock;
- uint16 n;
- uint32 sb;
- uint32 pci33;
- uint32 pci25;
- } n3m_table_t;
- static n3m_table_t BCMINITDATA(type1_table)[] = {
- /* 96.000 32.000 24.000 */
- {
- 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011},
- /* 100.000 33.333 25.000 */
- {
- 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011},
- /* 104.000 31.200 24.960 */
- {
- 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009},
- /* 108.000 32.400 24.923 */
- {
- 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802},
- /* 112.000 32.000 24.889 */
- {
- 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403},
- /* 115.200 32.000 24.000 */
- {
- 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011},
- /* 120.000 30.000 24.000 */
- {
- 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011},
- /* 124.800 31.200 24.960 */
- {
- 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009},
- /* 128.000 32.000 24.000 */
- {
- 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305},
- /* 132.000 33.000 24.750 */
- {
- 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305},
- /* 136.000 32.640 24.727 */
- {
- 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603},
- /* 140.000 30.000 24.706 */
- {
- 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02},
- /* 144.000 30.857 24.686 */
- {
- 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021},
- /* 150.857 33.000 24.000 */
- {
- 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605},
- /* 152.000 32.571 24.000 */
- {
- 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02},
- /* 156.000 31.200 24.960 */
- {
- 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009},
- /* 160.000 32.000 24.000 */
- {
- 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309},
- /* 163.200 32.640 24.727 */
- {
- 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603},
- /* 168.000 32.000 24.889 */
- {
- 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403},
- /* 176.000 33.000 24.000 */
- {
- 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602},};
-
- /* PLL configuration: type 3 */
- typedef struct {
- uint32 mipsclock;
- uint16 n;
- uint32 m2; /* that is the clockcontrol_m2 */
- } type3_table_t;
- static type3_table_t type3_table[] = {
- /* for 5350, mips clock is always double sb clock */
- {150000000, 0x311, 0x4020005},
- {200000000, 0x311, 0x4020003},
- };
-
- /* PLL configuration: type 2, 4, 7 */
- typedef struct {
- uint32 mipsclock;
- uint32 sbclock;
- uint32 pciclock;
- uint16 n;
- uint32 sb;
- uint32 pci33;
- uint32 m2;
- uint32 m3;
- uint32 ratio_cfg;
- uint32 ratio_parm;
- uint32 d11_r1;
- uint32 d11_r2;
- } n4m_table_t;
- static n4m_table_t BCMINITDATA(type2_table)[] = {
- {
- 120000000, 60000000, 32000000, 0x0303, 0x01000200,
- 0x01000600, 0x01000200, 0x05000200, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 150000000, 75000000, 33333333, 0x0303, 0x01000100,
- 0x01000600, 0x01000100, 0x05000100, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 180000000, 80000000, 30000000, 0x0403, 0x01010000,
- 0x01020300, 0x01020600, 0x05000100, 8, 0x012a00a9,
- 9 /* ratio 4/9 */ ,
- 0x012a00a9}, {
- 180000000, 90000000, 30000000, 0x0403, 0x01000100,
- 0x01020300, 0x01000100, 0x05000100, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 200000000, 100000000, 33333333, 0x0303, 0x02010000,
- 0x02040001, 0x02010000, 0x06000001, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 211200000, 105600000, 30171428, 0x0902, 0x01000200,
- 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 220800000, 110400000, 31542857, 0x1500, 0x01000200,
- 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 230400000, 115200000, 32000000, 0x0604, 0x01000200,
- 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 234000000, 104000000, 31200000, 0x0b01, 0x01010000,
- 0x01010700, 0x01020600, 0x05000100, 8, 0x012a00a9,
- 9 /* ratio 4/9 */ ,
- 0x012a00a9}, {
- 240000000, 120000000, 33333333, 0x0803, 0x01000200,
- 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 252000000, 126000000, 33333333, 0x0504, 0x01000100,
- 0x01020500, 0x01000100, 0x05000100, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 264000000, 132000000, 33000000, 0x0903, 0x01000200,
- 0x01020700, 0x01000200, 0x05000200, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 270000000, 120000000, 30000000, 0x0703, 0x01010000,
- 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9,
- 9 /* ratio 4/9 */ ,
- 0x012a00a9}, {
- 276000000, 122666666, 31542857, 0x1500, 0x01010000,
- 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9,
- 9 /* ratio 4/9 */ ,
- 0x012a00a9}, {
- 280000000, 140000000, 31111111, 0x0503, 0x01000000,
- 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 288000000, 128000000, 32914285, 0x0604, 0x01010000,
- 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9,
- 9 /* ratio 4/9 */ ,
- 0x012a00a9}, {
- 288000000, 144000000, 32000000, 0x0404, 0x01000000,
- 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 300000000, 133333333, 33333333, 0x0803, 0x01010000,
- 0x01020600, 0x01010100, 0x05000100, 8, 0x012a00a9,
- 9 /* ratio 4/9 */ ,
- 0x012a00a9}, {
- 300000000, 133333333, 37500000, 0x0803, 0x01010000,
- 0x01020500, 0x01010100, 0x05000100, 8, 0x012a00a9,
- 9 /* ratio 4/9 */ ,
- 0x012a00a9}, {
- 300000000, 133333333, 42857142, 0x0803, 0x01010000,
- 0x01020400, 0x01010100, 0x05000100, 8, 0x012a00a9,
- 9 /* ratio 4/9 */ ,
- 0x012a00a9}, {
- 300000000, 133333333, 50000000, 0x0803, 0x01010000,
- 0x01020300, 0x01010100, 0x05000100, 8, 0x012a00a9,
- 9 /* ratio 4/9 */ ,
- 0x012a00a9}, {
- 300000000, 133333333, 60000000, 0x0803, 0x01010000,
- 0x01020200, 0x01010100, 0x05000100, 8, 0x012a00a9,
- 9 /* ratio 4/9 */ ,
- 0x012a00a9}, {
- 300000000, 150000000, 33333333, 0x0803, 0x01000100,
- 0x01020600, 0x01010100, 0x05000100, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 300000000, 150000000, 37500000, 0x0803, 0x01000100,
- 0x01020500, 0x01010100, 0x05000100, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 300000000, 150000000, 42857142, 0x0803, 0x01000100,
- 0x01020400, 0x01010100, 0x05000100, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 300000000, 150000000, 50000000, 0x0803, 0x01000100,
- 0x01020300, 0x01010100, 0x05000100, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 300000000, 150000000, 60000000, 0x0803, 0x01000100,
- 0x01020200, 0x01010100, 0x05000100, 11, 0x0aaa0555,
- 8 /* ratio 4/8 */ ,
- 0x00aa0055}, {
- 330000000, 132000000, 33000000, 0x0903, 0x01000200,
- 0x00020200, 0x01010100, 0x05000100, 0, 0,
- 10 /* ratio 4/10 */ , 0x02520129},
- {
- 330000000, 146666666, 33000000, 0x0903, 0x01010000,
- 0x00020200, 0x01010100, 0x05000100, 0, 0,
- 9 /* ratio 4/9 */ , 0x012a00a9},
- {
- 330000000, 165000000, 33000000, 0x0903, 0x01000100,
- 0x00020200, 0x01010100, 0x05000100, 0, 0,
- 8 /* ratio 4/8 */ , 0x00aa0055},
- {
- 330000000, 165000000, 41250000, 0x0903, 0x01000100,
- 0x00020100, 0x01010100, 0x05000100, 0, 0,
- 8 /* ratio 4/8 */ , 0x00aa0055},
- {
- 330000000, 165000000, 55000000, 0x0903, 0x01000100,
- 0x00020000, 0x01010100, 0x05000100, 0, 0,
- 8 /* ratio 4/8 */ , 0x00aa0055},
- {
- 360000000, 120000000, 32000000, 0x0a03, 0x01000300,
- 0x00010201, 0x01010200, 0x05000100, 0, 0,
- 12 /* ratio 4/12 */ , 0x04920492},
- {
- 360000000, 144000000, 32000000, 0x0a03, 0x01000200,
- 0x00010201, 0x01010200, 0x05000100, 0, 0,
- 10 /* ratio 4/10 */ , 0x02520129},
- {
- 360000000, 160000000, 32000000, 0x0a03, 0x01010000,
- 0x00010201, 0x01010200, 0x05000100, 0, 0,
- 9 /* ratio 4/9 */ , 0x012a00a9},
- {
- 360000000, 180000000, 32000000, 0x0a03, 0x01000100,
- 0x00010201, 0x01010200, 0x05000100, 0, 0,
- 8 /* ratio 4/8 */ , 0x00aa0055},
- {
- 360000000, 180000000, 40000000, 0x0a03, 0x01000100,
- 0x00010101, 0x01010200, 0x05000100, 0, 0,
- 8 /* ratio 4/8 */ , 0x00aa0055},
- {
- 360000000, 180000000, 53333333, 0x0a03, 0x01000100,
- 0x00010001, 0x01010200, 0x05000100, 0, 0,
- 8 /* ratio 4/8 */ , 0x00aa0055},
- {
- 390000000, 130000000, 32500000, 0x0b03, 0x01010100,
- 0x00020101, 0x01020100, 0x05000100, 0, 0,
- 12 /* ratio 4/12 */ , 0x04920492},
- {
- 390000000, 156000000, 32500000, 0x0b03, 0x01000200,
- 0x00020101, 0x01020100, 0x05000100, 0, 0,
- 10 /* ratio 4/10 */ , 0x02520129},
- {
- 390000000, 173000000, 32500000, 0x0b03, 0x01010000,
- 0x00020101, 0x01020100, 0x05000100, 0, 0,
- 9 /* ratio 4/9 */ , 0x012a00a9},
- {
- 390000000, 195000000, 32500000, 0x0b03, 0x01000100,
- 0x00020101, 0x01020100, 0x05000100, 0, 0,
- 8 /* ratio 4/8 */ , 0x00aa0055},
- };
- static n4m_table_t BCMINITDATA(type4_table)[] = {
- {
- 120000000, 60000000, 0, 0x0009, 0x11020009, 0x01030203,
- 0x11020009, 0x04000009, 11, 0x0aaa0555}, {
- 150000000, 75000000, 0, 0x0009, 0x11050002, 0x01030203,
- 0x11050002, 0x04000005, 11, 0x0aaa0555}, {
- 192000000, 96000000, 0, 0x0702, 0x04000011, 0x11030011,
- 0x04000011, 0x04000003, 11, 0x0aaa0555}, {
- 198000000, 99000000, 0, 0x0603, 0x11020005, 0x11030011,
- 0x11020005, 0x04000005, 11, 0x0aaa0555}, {
- 200000000, 100000000, 0, 0x0009, 0x04020011, 0x11030011,
- 0x04020011, 0x04020003, 11, 0x0aaa0555}, {
- 204000000, 102000000, 0, 0x0c02, 0x11020005, 0x01030303,
- 0x11020005, 0x04000005, 11, 0x0aaa0555}, {
- 208000000, 104000000, 0, 0x0802, 0x11030002, 0x11090005,
- 0x11030002, 0x04000003, 11, 0x0aaa0555}, {
- 210000000, 105000000, 0, 0x0209, 0x11020005, 0x01030303,
- 0x11020005, 0x04000005, 11, 0x0aaa0555}, {
- 216000000, 108000000, 0, 0x0111, 0x11020005, 0x01030303,
- 0x11020005, 0x04000005, 11, 0x0aaa0555}, {
- 224000000, 112000000, 0, 0x0205, 0x11030002, 0x02002103,
- 0x11030002, 0x04000003, 11, 0x0aaa0555}, {
- 228000000, 101333333, 0, 0x0e02, 0x11030003, 0x11210005,
- 0x01030305, 0x04000005, 8, 0x012a00a9}, {
- 228000000, 114000000, 0, 0x0e02, 0x11020005, 0x11210005,
- 0x11020005, 0x04000005, 11, 0x0aaa0555}, {
- 240000000, 102857143, 0, 0x0109, 0x04000021, 0x01050203,
- 0x11030021, 0x04000003, 13, 0x254a14a9}, {
- 240000000, 120000000, 0, 0x0109, 0x11030002, 0x01050203,
- 0x11030002, 0x04000003, 11, 0x0aaa0555}, {
- 252000000, 100800000, 0, 0x0203, 0x04000009, 0x11050005,
- 0x02000209, 0x04000002, 9, 0x02520129}, {
- 252000000, 126000000, 0, 0x0203, 0x04000005, 0x11050005,
- 0x04000005, 0x04000002, 11, 0x0aaa0555}, {
- 264000000, 132000000, 0, 0x0602, 0x04000005, 0x11050005,
- 0x04000005, 0x04000002, 11, 0x0aaa0555}, {
- 272000000, 116571428, 0, 0x0c02, 0x04000021, 0x02000909,
- 0x02000221, 0x04000003, 13, 0x254a14a9}, {
- 280000000, 120000000, 0, 0x0209, 0x04000021, 0x01030303,
- 0x02000221, 0x04000003, 13, 0x254a14a9}, {
- 288000000, 123428571, 0, 0x0111, 0x04000021, 0x01030303,
- 0x02000221, 0x04000003, 13, 0x254a14a9}, {
- 300000000, 120000000, 0, 0x0009, 0x04000009, 0x01030203,
- 0x02000902, 0x04000002, 9, 0x02520129}, {
- 300000000, 150000000, 0, 0x0009, 0x04000005, 0x01030203,
- 0x04000005, 0x04000002, 11, 0x0aaa0555}
- };
- static n4m_table_t BCMINITDATA(type7_table)[] = {
- {
- 183333333, 91666666, 0, 0x0605, 0x04000011, 0x11030011,
- 0x04000011, 0x04000003, 11, 0x0aaa0555}, {
- 187500000, 93750000, 0, 0x0a03, 0x04000011, 0x11030011,
- 0x04000011, 0x04000003, 11, 0x0aaa0555}, {
- 196875000, 98437500, 0, 0x1003, 0x11020005, 0x11050011,
- 0x11020005, 0x04000005, 11, 0x0aaa0555}, {
- 200000000, 100000000, 0, 0x0311, 0x04000011, 0x11030011,
- 0x04000009, 0x04000003, 11, 0x0aaa0555}, {
- 200000000, 100000000, 0, 0x0311, 0x04020011, 0x11030011,
- 0x04020011, 0x04020003, 11, 0x0aaa0555}, {
- 206250000, 103125000, 0, 0x1103, 0x11020005, 0x11050011,
- 0x11020005, 0x04000005, 11, 0x0aaa0555}, {
- 212500000, 106250000, 0, 0x0c05, 0x11020005, 0x01030303,
- 0x11020005, 0x04000005, 11, 0x0aaa0555}, {
- 215625000, 107812500, 0, 0x1203, 0x11090009, 0x11050005,
- 0x11020005, 0x04000005, 11, 0x0aaa0555}, {
- 216666666, 108333333, 0, 0x0805, 0x11020003, 0x11030011,
- 0x11020003, 0x04000003, 11, 0x0aaa0555}, {
- 225000000, 112500000, 0, 0x0d03, 0x11020003, 0x11030011,
- 0x11020003, 0x04000003, 11, 0x0aaa0555}, {
- 233333333, 116666666, 0, 0x0905, 0x11020003, 0x11030011,
- 0x11020003, 0x04000003, 11, 0x0aaa0555}, {
- 237500000, 118750000, 0, 0x0e05, 0x11020005, 0x11210005,
- 0x11020005, 0x04000005, 11, 0x0aaa0555}, {
- 240000000, 120000000, 0, 0x0b11, 0x11020009, 0x11210009,
- 0x11020009, 0x04000009, 11, 0x0aaa0555}, {
- 250000000, 125000000, 0, 0x0f03, 0x11020003, 0x11210003,
- 0x11020003, 0x04000003, 11, 0x0aaa0555}
- };
-
- ulong start, end, dst;
- bool ret = FALSE;
-
- volatile uint32 *dll_ctrl = (volatile uint32 *)0xff400008;
- volatile uint32 *dll_r1 = (volatile uint32 *)0xff400010;
- volatile uint32 *dll_r2 = (volatile uint32 *)0xff400018;
-
- /* get index of the current core */
- idx = sb_coreidx(sbh);
- clockcontrol_m2 = NULL;
-
- /* switch to chipc core */
- /* switch to extif or chipc core */
- if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
- pll_type = PLL_TYPE1;
- clockcontrol_n = &eir->clockcontrol_n;
- clockcontrol_sb = &eir->clockcontrol_sb;
- clockcontrol_pci = &eir->clockcontrol_pci;
- clockcontrol_m2 = &cc->clockcontrol_m2;
- } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
- /* 5354 chipcommon pll setting can't be changed.
- * The PMU on power up comes up with the default clk frequency
- * of 240MHz
- */
- if (sb_chip(sbh) == BCM5354_CHIP_ID) {
- ret = TRUE;
- goto done;
- }
- pll_type = R_REG(osh, &cc->capabilities) & CC_CAP_PLL_MASK;
- if (pll_type == PLL_TYPE6) {
- clockcontrol_n = NULL;
- clockcontrol_sb = NULL;
- clockcontrol_pci = NULL;
- } else {
- clockcontrol_n = &cc->clockcontrol_n;
- clockcontrol_sb = &cc->clockcontrol_sb;
- clockcontrol_pci = &cc->clockcontrol_pci;
- clockcontrol_m2 = &cc->clockcontrol_m2;
- }
- } else
- goto done;
-
- if (pll_type == PLL_TYPE6) {
- /* Silence compilers */
- orig_n = orig_sb = orig_pci = 0;
- } else {
- /* Store the current clock register values */
- orig_n = R_REG(osh, clockcontrol_n);
- orig_sb = R_REG(osh, clockcontrol_sb);
- orig_pci = R_REG(osh, clockcontrol_pci);
- }
-
- if (pll_type == PLL_TYPE1) {
- /* Keep the current PCI clock if not specified */
- if (pciclock == 0) {
- pciclock =
- sb_clock_rate(pll_type, R_REG(osh, clockcontrol_n),
- R_REG(osh, clockcontrol_pci));
- pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
- }
-
- /* Search for the closest MIPS clock less than or equal to a preferred value */
- for (i = 0; i < ARRAYSIZE(type1_table); i++) {
- ASSERT(type1_table[i].mipsclock ==
- sb_clock_rate(pll_type, type1_table[i].n,
- type1_table[i].sb));
- if (type1_table[i].mipsclock > mipsclock)
- break;
- }
- if (i == 0) {
- ret = FALSE;
- goto done;
- } else {
- ret = TRUE;
- i--;
- }
- ASSERT(type1_table[i].mipsclock <= mipsclock);
-
- /* No PLL change */
- if ((orig_n == type1_table[i].n) &&
- (orig_sb == type1_table[i].sb) &&
- (orig_pci == type1_table[i].pci33))
- goto done;
-
- /* Set the PLL controls */
- W_REG(osh, clockcontrol_n, type1_table[i].n);
- W_REG(osh, clockcontrol_sb, type1_table[i].sb);
- if (pciclock == 25000000)
- W_REG(osh, clockcontrol_pci, type1_table[i].pci25);
- else
- W_REG(osh, clockcontrol_pci, type1_table[i].pci33);
-
- /* Reset */
- sb_watchdog(sbh, 1);
- while (1) ;
- } else if (pll_type == PLL_TYPE3) {
- /* 5350 */
- if (sb_chip(sbh) != BCM5365_CHIP_ID) {
- /*
- * Search for the closest MIPS clock less than or equal to
- * a preferred value.
- */
- for (i = 0; i < ARRAYSIZE(type3_table); i++) {
- if (type3_table[i].mipsclock > mipsclock)
- break;
- }
- if (i == 0) {
- ret = FALSE;
- goto done;
- } else {
- ret = TRUE;
- i--;
- }
- ASSERT(type3_table[i].mipsclock <= mipsclock);
-
- /* No PLL change */
- orig_m2 = R_REG(osh, &cc->clockcontrol_m2);
- if ((orig_n == type3_table[i].n)
- && (orig_m2 == type3_table[i].m2)) {
- goto done;
- }
-
- /* Set the PLL controls */
- W_REG(osh, clockcontrol_n, type3_table[i].n);
- W_REG(osh, clockcontrol_m2, type3_table[i].m2);
-
- /* Reset */
- sb_watchdog(sbh, 1);
- while (1) ;
- }
- } else if ((pll_type == PLL_TYPE2) ||
- (pll_type == PLL_TYPE4) ||
- (pll_type == PLL_TYPE6) || (pll_type == PLL_TYPE7)) {
- n4m_table_t *table = NULL, *te;
- uint tabsz = 0;
-
- ASSERT(cc);
-
- orig_mips = R_REG(osh, &cc->clockcontrol_m3);
-
- switch (pll_type) {
- case PLL_TYPE6:
- {
- uint32 new_mips = 0;
-
- ret = TRUE;
- if (mipsclock <= SB2MIPS_T6(CC_T6_M1))
- new_mips = CC_T6_MMASK;
-
- if (orig_mips == new_mips)
- goto done;
-
- W_REG(osh, &cc->clockcontrol_m3, new_mips);
- goto end_fill;
- }
- case PLL_TYPE2:
- table = type2_table;
- tabsz = ARRAYSIZE(type2_table);
- break;
- case PLL_TYPE4:
- table = type4_table;
- tabsz = ARRAYSIZE(type4_table);
- break;
- case PLL_TYPE7:
- table = type7_table;
- tabsz = ARRAYSIZE(type7_table);
- break;
- default:
- ASSERT("No table for plltype" == NULL);
- break;
- }
-
- /* Store the current clock register values */
- orig_m2 = R_REG(osh, &cc->clockcontrol_m2);
- orig_ratio_parm = 0;
- orig_ratio_cfg = 0;
-
- /* Look up current ratio */
- for (i = 0; i < tabsz; i++) {
- if ((orig_n == table[i].n) &&
- (orig_sb == table[i].sb) &&
- (orig_pci == table[i].pci33) &&
- (orig_m2 == table[i].m2)
- && (orig_mips == table[i].m3)) {
- orig_ratio_parm = table[i].ratio_parm;
- orig_ratio_cfg = table[i].ratio_cfg;
- break;
- }
- }
-
- /* Search for the closest MIPS clock greater or equal to a preferred value */
- for (i = 0; i < tabsz; i++) {
- ASSERT(table[i].mipsclock ==
- sb_clock_rate(pll_type, table[i].n,
- table[i].m3));
- if ((mipsclock <= table[i].mipsclock)
- && ((sbclock == 0) || (sbclock <= table[i].sbclock))
- && ((pciclock == 0)
- || (pciclock <= table[i].pciclock)))
- break;
- }
- if (i == tabsz) {
- ret = FALSE;
- goto done;
- } else {
- te = &table[i];
- ret = TRUE;
- }
-
- /* No PLL change */
- if ((orig_n == te->n) &&
- (orig_sb == te->sb) &&
- (orig_pci == te->pci33) &&
- (orig_m2 == te->m2) && (orig_mips == te->m3))
- goto done;
-
- /* Set the PLL controls */
- W_REG(osh, clockcontrol_n, te->n);
- W_REG(osh, clockcontrol_sb, te->sb);
- W_REG(osh, clockcontrol_pci, te->pci33);
- W_REG(osh, &cc->clockcontrol_m2, te->m2);
- W_REG(osh, &cc->clockcontrol_m3, te->m3);
-
- /* Set the chipcontrol bit to change mipsref to the backplane divider if needed */
- if ((pll_type == PLL_TYPE7) && (te->sb != te->m2) &&
- (sb_clock_rate(pll_type, te->n, te->m2) == 120000000))
- W_REG(osh, &cc->chipcontrol,
- R_REG(osh, &cc->chipcontrol) | 0x100);
-
- /* No ratio change */
- if (sb_chip(sbh) != BCM4785_CHIP_ID) {
- if (orig_ratio_parm == te->ratio_parm)
- goto end_fill;
- }
-
- /* Preload the code into the cache */
- icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize);
- if (sb_chip(sbh) == BCM4785_CHIP_ID) {
- start = ((ulong) && start_fill_4785) & ~(ic_lsize - 1);
- end = ((ulong)
- && end_fill_4785 + (ic_lsize - 1)) & ~(ic_lsize -
- 1);
- } else {
- start = ((ulong) && start_fill) & ~(ic_lsize - 1);
- end = ((ulong)
- && end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
- }
- while (start < end) {
- cache_op(start, Fill_I);
- start += ic_lsize;
- }
-
- /* 4785 clock freq change procedures */
- if (sb_chip(sbh) == BCM4785_CHIP_ID) {
- start_fill_4785:
- /* Switch to async */
- MTC0(C0_BROADCOM, 4, (1 << 22));
-
- /* Set clock ratio in MIPS */
- *dll_r1 = (*dll_r1 & 0xfffffff0) | (te->d11_r1 - 1);
- *dll_r2 = te->d11_r2;
-
- /* Enable new settings in MIPS */
- *dll_r1 = *dll_r1 | 0xc0000000;
-
- /* Set active cfg */
- MTC0(C0_BROADCOM, 2,
- MFC0(C0_BROADCOM, 2) | (1 << 3) | 1);
-
- /* Fake soft reset (clock cfg registers not reset) */
- MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2));
-
- /* Clear active cfg */
- MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) & ~(1 << 3));
-
- /* set watchdog timer */
- W_REG(osh, &cc->watchdog, 20);
- (void)R_REG(osh, &cc->chipid);
-
- /* wait for timer interrupt */
- __asm__ __volatile__(".set\tmips3\n\t"
- "sync\n\t" "wait\n\t"
- ".set\tmips0");
- end_fill_4785:
- while (1) ;
- }
- /* Generic clock freq change procedures */
- else {
- /* Copy the handler */
- start = (ulong) & handler;
- end = (ulong) & afterhandler;
- dst = KSEG1ADDR(0x180);
- for (i = 0; i < (end - start); i += 4)
- *((ulong *) (dst + i)) =
- *((ulong *) (start + i));
-
- /* Preload the handler into the cache one line at a time */
- for (i = 0; i < (end - start); i += ic_lsize)
- cache_op(dst + i, Fill_I);
-
- /* Clear BEV bit */
- MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
-
- /* Enable interrupts */
- MTC0(C0_STATUS, 0,
- MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
-
- /* Enable MIPS timer interrupt */
- if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
- !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
- ASSERT(mipsr);
- W_REG(osh, &mipsr->intmask, 1);
-
- start_fill:
- /* step 1, set clock ratios */
- MTC0(C0_BROADCOM, 3, te->ratio_parm);
- MTC0(C0_BROADCOM, 1, te->ratio_cfg);
-
- /* step 2: program timer intr */
- W_REG(osh, &mipsr->timer, 100);
- (void)R_REG(osh, &mipsr->timer);
-
- /* step 3, switch to async */
- sync_mode = MFC0(C0_BROADCOM, 4);
- MTC0(C0_BROADCOM, 4, 1 << 22);
-
- /* step 4, set cfg active */
- MTC0(C0_BROADCOM, 2, (1 << 3) | 1);
-
- /* steps 5 & 6 */
- __asm__ __volatile__(".set\tmips3\n\t" "wait\n\t"
- ".set\tmips0");
-
- /* step 7, clear cfg active */
- MTC0(C0_BROADCOM, 2, 0);
-
- /* Additional Step: set back to orig sync mode */
- MTC0(C0_BROADCOM, 4, sync_mode);
-
- /* step 8, fake soft reset */
- MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2));
-
- end_fill:
- /* set watchdog timer */
- W_REG(osh, &cc->watchdog, 20);
- (void)R_REG(osh, &cc->chipid);
-
- /* wait for timer interrupt */
- __asm__ __volatile__(".set\tmips3\n\t"
- "sync\n\t" "wait\n\t"
- ".set\tmips0");
- while (1) ;
- }
- }
-
- done:
- /* Enable 4785 DLL */
- if (sb_chip(sbh) == BCM4785_CHIP_ID) {
- uint32 tmp;
-
- /* set mask to 1e, enable DLL (bit 0) */
- *dll_ctrl |= 0x0041e021;
-
- /* enable aggressive hardware mode */
- *dll_ctrl |= 0x00000080;
-
- /* wait for lock flag to clear */
- while ((*dll_ctrl & 0x2) == 0) ;
-
- /* clear sticky flags (clear on write 1) */
- tmp = *dll_ctrl;
- *dll_ctrl = tmp;
-
- /* set mask to 5b'10001 */
- *dll_ctrl = (*dll_ctrl & 0xfffc1fff) | 0x00022000;
-
- /* enable sync mode */
- MTC0(C0_BROADCOM, 4, MFC0(C0_BROADCOM, 4) & 0xfe3fffff);
- (void)MFC0(C0_BROADCOM, 4);
- }
-
- /* switch back to previous core */
- sb_setcoreidx(sbh, idx);
-
- return ret;
-}
-
-void BCMINITFN(enable_pfc) (uint32 mode) {
- ulong start, end;
- uint ic_size, ic_lsize;
-
- /* If auto then choose the correct mode for this
- * platform, currently we only ever select one mode
- */
- if (mode == PFC_AUTO)
- mode = PFC_INST;
-
- icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize);
-
- /* enable prefetch cache if available */
- if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) {
- start = ((ulong) && setpfc_start) & ~(ic_lsize - 1);
- end = ((ulong)
- && setpfc_end + (ic_lsize - 1)) & ~(ic_lsize - 1);
-
- /* Preload setpfc code into the cache one line at a time */
- while (start < end) {
- cache_op(start, Fill_I);
- start += ic_lsize;
- }
-
- /* Now set the pfc */
- setpfc_start:
- /* write range */
- *(volatile uint32 *)PFC_CR1 = 0xffff0000;
-
- /* enable */
- *(volatile uint32 *)PFC_CR0 = mode;
- setpfc_end:
- /* Compiler foder */
- ic_size = 0;
- }
-}
-
-/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
-uint32 BCMINITFN(sb_memc_get_ncdl) (sb_t * sbh) {
- osl_t *osh;
- sbmemcregs_t *memc;
- uint32 ret = 0;
- uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
- uint idx, rev;
-
- osh = sb_osh(sbh);
-
- idx = sb_coreidx(sbh);
-
- memc = (sbmemcregs_t *) sb_setcore(sbh, SB_MEMC, 0);
- if (memc == 0)
- goto out;
-
- rev = sb_corerev(sbh);
-
- config = R_REG(osh, &memc->config);
- wr = R_REG(osh, &memc->wrncdlcor);
- rd = R_REG(osh, &memc->rdncdlcor);
- misc = R_REG(osh, &memc->miscdlyctl);
- dqsg = R_REG(osh, &memc->dqsgatencdl);
-
- rd &= MEMC_RDNCDLCOR_RD_MASK;
- wr &= MEMC_WRNCDLCOR_WR_MASK;
- dqsg &= MEMC_DQSGATENCDL_G_MASK;
-
- if (config & MEMC_CONFIG_DDR) {
- ret = (wr << 16) | (rd << 8) | dqsg;
- } else {
- if (rev > 0)
- cd = rd;
- else
- cd = (rd ==
- MEMC_CD_THRESHOLD) ? rd : (wr +
- MEMC_CD_THRESHOLD);
- sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
- sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
- ret = (sm << 16) | (sd << 8) | cd;
- }
-
- out:
- /* switch back to previous core */
- sb_setcoreidx(sbh, idx);
-
- return ret;
-}
-
-void hnd_cpu_reset(sb_t * sbh)
-{
- if (sb_chip(sbh) == BCM4785_CHIP_ID)
- MTC0(C0_BROADCOM, 4, (1 << 22));
- sb_watchdog(sbh, 1);
- if (sb_chip(sbh) == BCM4785_CHIP_ID) {
- __asm__ __volatile__(".set\tmips3\n\t"
- "sync\n\t" "wait\n\t" ".set\tmips0");
- }
- while (1) ;
-}
-
-#if defined(BCMPERFSTATS)
-/*
- * CP0 Register 25 supports 4 semi-independent 32bit performance counters.
- * $25 select 0, 1, 2, and 3 are the counters. The counters *decrement* (who thought this one up?)
- * $25 select 4 and 5 each contain 2-16bit control fields, one for each of the 4 counters
- * $25 select 6 is the global perf control register.
- */
-/* enable and start instruction counting */
-
-void hndmips_perf_cyclecount_enable(void)
-{
- MTC0(C0_PERFORMANCE, 6, 0x80000200); /* global enable perf counters */
- MTC0(C0_PERFORMANCE, 4, 0x8048 | MFC0(C0_PERFORMANCE, 4)); /* enable cycles counting for counter 0 */
- MTC0(C0_PERFORMANCE, 0, 0); /* zero counter zero */
-}
-
-void hndmips_perf_instrcount_enable(void)
-{
- MTC0(C0_PERFORMANCE, 6, 0x80000200); /* global enable perf counters */
- MTC0(C0_PERFORMANCE, 4, 0x8044 | MFC0(C0_PERFORMANCE, 4)); /* enable instructions counting for counter 0 */
- MTC0(C0_PERFORMANCE, 0, 0); /* zero counter zero */
-}
-
-/* enable and start I$ hit and I$ miss counting */
-void hndmips_perf_icachecount_enable(void)
-{
- MTC0(C0_PERFORMANCE, 6, 0x80000218); /* enable I$ counting */
- MTC0(C0_PERFORMANCE, 4, 0x80148018); /* count I$ hits in cntr 0 and misses in cntr 1 */
- MTC0(C0_PERFORMANCE, 0, 0); /* zero counter 0 - # I$ hits */
- MTC0(C0_PERFORMANCE, 1, 0); /* zero counter 1 - # I$ misses */
-}
-
-/* enable and start D$ hit and I$ miss counting */
-void hndmips_perf_dcachecount_enable(void)
-{
- MTC0(C0_PERFORMANCE, 6, 0x80000211); /* enable D$ counting */
- MTC0(C0_PERFORMANCE, 4, 0x80248028); /* count D$ hits in cntr 0 and misses in cntr 1 */
- MTC0(C0_PERFORMANCE, 0, 0); /* zero counter 0 - # D$ hits */
- MTC0(C0_PERFORMANCE, 1, 0); /* zero counter 1 - # D$ misses */
-}
-
-void hndmips_perf_icache_miss_enable()
-{
- MTC0(C0_PERFORMANCE, 4, 0x80140000 | MFC0(C0_PERFORMANCE, 4)); /* enable cache misses counting for counter 1 */
- MTC0(C0_PERFORMANCE, 1, 0); /* zero counter one */
-}
-
-void hndmips_perf_icache_hit_enable()
-{
- MTC0(C0_PERFORMANCE, 5, 0x8018 | MFC0(C0_PERFORMANCE, 5));
- /* enable cache hits counting for counter 2 */
- MTC0(C0_PERFORMANCE, 2, 0); /* zero counter 2 */
-}
-
-uint32 hndmips_perf_read_instrcount()
-{
- return -(long)(MFC0(C0_PERFORMANCE, 0));
-}
-
-uint32 hndmips_perf_read_cache_miss()
-{
- return -(long)(MFC0(C0_PERFORMANCE, 1));
-}
-
-uint32 hndmips_perf_read_cache_hit()
-{
- return -(long)(MFC0(C0_PERFORMANCE, 2));
-}
-
-#endif
+++ /dev/null
-/*
- * Low-Level PCI and SB support for BCM47xx
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <typedefs.h>
-#include <osl.h>
-#include <pcicfg.h>
-#include <bcmdevs.h>
-#include <sbconfig.h>
-#include <sbutils.h>
-#include <sbpci.h>
-#include <bcmendian.h>
-#include <bcmnvram.h>
-#include <hndcpu.h>
-#include <hndmips.h>
-#include <hndpci.h>
-
-/* debug/trace */
-#ifdef BCMDBG_PCI
-#define PCI_MSG(args) printf args
-#else
-#define PCI_MSG(args)
-#endif /* BCMDBG_PCI */
-
-/* Can free sbpci_init() memory after boot */
-#ifndef linux
-#define __init
-#endif /* linux */
-
-/* Emulated configuration space */
-typedef struct {
- int n;
- uint size0;
- uint size1;
- uint size2;
- uint size3;
-} sb_bar_cfg_t;
-static pci_config_regs sb_config_regs[SB_MAXCORES];
-static sb_bar_cfg_t sb_bar_cfg[SB_MAXCORES];
-
-/* Links to emulated and real PCI configuration spaces */
-#define MAXFUNCS 2
-typedef struct {
- pci_config_regs *emu; /* emulated PCI config */
- pci_config_regs *pci; /* real PCI config */
- sb_bar_cfg_t *bar; /* region sizes */
-} sb_pci_cfg_t;
-static sb_pci_cfg_t sb_pci_cfg[SB_MAXCORES][MAXFUNCS];
-
-/* Special emulated config space for non-existing device */
-static pci_config_regs sb_pci_null = { 0xffff, 0xffff };
-
-/* Banned cores */
-static uint16 pci_ban[SB_MAXCORES] = { 0 };
-static uint pci_banned = 0;
-
-/* CardBus mode */
-static bool cardbus = FALSE;
-
-/* Disable PCI host core */
-static bool pci_disabled = FALSE;
-
-/* Host bridge slot #, default to 0 */
-static uint8 pci_hbslot = 0;
-
-/* Internal macros */
-#define PCI_SLOTAD_MAP 16 /* SLOT<n> mapps to AD<n+16> */
-#define PCI_HBSBCFG_REV 8 /* MIN. core rev. required to
- * access host bridge PCI cfg space
- * from SB
- */
-
-/*
- * Functions for accessing external PCI configuration space
- */
-
-/* Assume one-hot slot wiring */
-#define PCI_SLOT_MAX 16 /* Max. PCI Slots */
-
-static uint32 config_cmd(sb_t * sbh, uint bus, uint dev, uint func, uint off)
-{
- uint coreidx;
- sbpciregs_t *regs;
- uint32 addr = 0;
- osl_t *osh;
-
- /* CardBusMode supports only one device */
- if (cardbus && dev > 1)
- return 0;
-
- osh = sb_osh(sbh);
-
- coreidx = sb_coreidx(sbh);
- regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
-
- /* Type 0 transaction */
- if (bus == 1) {
- /* Skip unwired slots */
- if (dev < PCI_SLOT_MAX) {
- uint32 win;
-
- /* Slide the PCI window to the appropriate slot */
- win =
- (SBTOPCI_CFG0 |
- ((1 << (dev + PCI_SLOTAD_MAP)) & SBTOPCI1_MASK));
- W_REG(osh, ®s->sbtopci1, win);
- addr = SB_PCI_CFG |
- ((1 << (dev + PCI_SLOTAD_MAP)) & ~SBTOPCI1_MASK) |
- (func << PCICFG_FUN_SHIFT) | (off & ~3);
- }
- } else {
- /* Type 1 transaction */
- W_REG(osh, ®s->sbtopci1, SBTOPCI_CFG1);
- addr = SB_PCI_CFG |
- (bus << PCICFG_BUS_SHIFT) |
- (dev << PCICFG_SLOT_SHIFT) |
- (func << PCICFG_FUN_SHIFT) | (off & ~3);
- }
-
- sb_setcoreidx(sbh, coreidx);
-
- return addr;
-}
-
-/*
- * Read host bridge PCI config registers from Silicon Backplane (>=rev8).
- *
- * It returns TRUE to indicate that access to the host bridge's pci config
- * from SB is ok, and values in 'addr' and 'val' are valid.
- *
- * It can only read registers at multiple of 4-bytes. Callers must pick up
- * needed bytes from 'val' based on 'off' value. Value in 'addr' reflects
- * the register address where value in 'val' is read.
- */
-static bool
-sb_pcihb_read_config(sb_t * sbh, uint bus, uint dev, uint func, uint off,
- uint32 ** addr, uint32 * val)
-{
- sbpciregs_t *regs;
- osl_t *osh;
- uint coreidx;
- bool ret = FALSE;
-
- /* sanity check */
- ASSERT(bus == 1);
- ASSERT(dev == pci_hbslot);
- ASSERT(func == 0);
-
- osh = sb_osh(sbh);
-
- /* read pci config when core rev >= 8 */
- coreidx = sb_coreidx(sbh);
- regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
- if (regs && sb_corerev(sbh) >= PCI_HBSBCFG_REV) {
- *addr = (uint32 *) & regs->pcicfg[func][off >> 2];
- *val = R_REG(osh, *addr);
- ret = TRUE;
- }
- sb_setcoreidx(sbh, coreidx);
-
- return ret;
-}
-
-int
-extpci_read_config(sb_t * sbh, uint bus, uint dev, uint func, uint off,
- void *buf, int len)
-{
- uint32 addr = 0, *reg = NULL, val;
- int ret = 0;
-
- /*
- * Set value to -1 when:
- * flag 'pci_disabled' is true;
- * value of 'addr' is zero;
- * REG_MAP() fails;
- * BUSPROBE() fails;
- */
- if (pci_disabled)
- val = 0xffffffff;
- else if (bus == 1 && dev == pci_hbslot && func == 0 &&
- sb_pcihb_read_config(sbh, bus, dev, func, off, ®, &val)) ;
- else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) ||
- ((reg = (uint32 *) REG_MAP(addr, len)) == 0) ||
- (BUSPROBE(val, reg) != 0))
- val = 0xffffffff;
-
- PCI_MSG(("%s: 0x%x <= 0x%p(0x%x), len %d, off 0x%x, buf 0x%p\n",
- __FUNCTION__, val, reg, addr, len, off, buf));
-
- val >>= 8 * (off & 3);
- if (len == 4)
- *((uint32 *) buf) = val;
- else if (len == 2)
- *((uint16 *) buf) = (uint16) val;
- else if (len == 1)
- *((uint8 *) buf) = (uint8) val;
- else
- ret = -1;
-
- if (reg && addr)
- REG_UNMAP(reg);
-
- return ret;
-}
-
-int
-extpci_write_config(sb_t * sbh, uint bus, uint dev, uint func, uint off,
- void *buf, int len)
-{
- osl_t *osh;
- uint32 addr = 0, *reg = NULL, val;
- int ret = 0;
-
- osh = sb_osh(sbh);
-
- /*
- * Ignore write attempt when:
- * flag 'pci_disabled' is true;
- * value of 'addr' is zero;
- * REG_MAP() fails;
- * BUSPROBE() fails;
- */
- if (pci_disabled)
- return 0;
- else if (bus == 1 && dev == pci_hbslot && func == 0 &&
- sb_pcihb_read_config(sbh, bus, dev, func, off, ®, &val)) ;
- else if (((addr = config_cmd(sbh, bus, dev, func, off)) == 0) ||
- ((reg = (uint32 *) REG_MAP(addr, len)) == 0) ||
- (BUSPROBE(val, reg) != 0))
- goto done;
-
- if (len == 4)
- val = *((uint32 *) buf);
- else if (len == 2) {
- val &= ~(0xffff << (8 * (off & 3)));
- val |= *((uint16 *) buf) << (8 * (off & 3));
- } else if (len == 1) {
- val &= ~(0xff << (8 * (off & 3)));
- val |= *((uint8 *) buf) << (8 * (off & 3));
- } else {
- ret = -1;
- goto done;
- }
-
- PCI_MSG(("%s: 0x%x => 0x%p\n", __FUNCTION__, val, reg));
-
- W_REG(osh, reg, val);
-
- done:
- if (reg && addr)
- REG_UNMAP(reg);
-
- return ret;
-}
-
-/*
- * Must access emulated PCI configuration at these locations even when
- * the real PCI config space exists and is accessible.
- *
- * PCI_CFG_VID (0x00)
- * PCI_CFG_DID (0x02)
- * PCI_CFG_PROGIF (0x09)
- * PCI_CFG_SUBCL (0x0a)
- * PCI_CFG_BASECL (0x0b)
- * PCI_CFG_HDR (0x0e)
- * PCI_CFG_INT (0x3c)
- * PCI_CFG_PIN (0x3d)
- */
-#define FORCE_EMUCFG(off, len) \
- ((off == PCI_CFG_VID) || (off == PCI_CFG_DID) || \
- (off == PCI_CFG_PROGIF) || \
- (off == PCI_CFG_SUBCL) || (off == PCI_CFG_BASECL) || \
- (off == PCI_CFG_HDR) || \
- (off == PCI_CFG_INT) || (off == PCI_CFG_PIN))
-
-/* Sync the emulation registers and the real PCI config registers. */
-static void
-sb_pcid_read_config(sb_t * sbh, uint coreidx, sb_pci_cfg_t * cfg,
- uint off, uint len)
-{
- osl_t *osh;
- uint oldidx;
-
- ASSERT(cfg);
- ASSERT(cfg->emu);
- ASSERT(cfg->pci);
-
- /* decide if real PCI config register access is necessary */
- if (FORCE_EMUCFG(off, len))
- return;
-
- osh = sb_osh(sbh);
-
- /* access to the real pci config space only when the core is up */
- oldidx = sb_coreidx(sbh);
- sb_setcoreidx(sbh, coreidx);
- if (sb_iscoreup(sbh)) {
- if (len == 4)
- *(uint32 *) ((ulong) cfg->emu + off) =
- htol32(R_REG
- (osh, (uint32 *) ((ulong) cfg->pci + off)));
- else if (len == 2)
- *(uint16 *) ((ulong) cfg->emu + off) =
- htol16(R_REG
- (osh, (uint16 *) ((ulong) cfg->pci + off)));
- else if (len == 1)
- *(uint8 *) ((ulong) cfg->emu + off) =
- R_REG(osh, (uint8 *) ((ulong) cfg->pci + off));
- }
- sb_setcoreidx(sbh, oldidx);
-}
-
-static void
-sb_pcid_write_config(sb_t * sbh, uint coreidx, sb_pci_cfg_t * cfg,
- uint off, uint len)
-{
- osl_t *osh;
- uint oldidx;
-
- ASSERT(cfg);
- ASSERT(cfg->emu);
- ASSERT(cfg->pci);
-
- osh = sb_osh(sbh);
-
- /* decide if real PCI config register access is necessary */
- if (FORCE_EMUCFG(off, len))
- return;
-
- /* access to the real pci config space only when the core is up */
- oldidx = sb_coreidx(sbh);
- sb_setcoreidx(sbh, coreidx);
- if (sb_iscoreup(sbh)) {
- if (len == 4)
- W_REG(osh, (uint32 *) ((ulong) cfg->pci + off),
- ltoh32(*(uint32 *) ((ulong) cfg->emu + off)));
- else if (len == 2)
- W_REG(osh, (uint16 *) ((ulong) cfg->pci + off),
- ltoh16(*(uint16 *) ((ulong) cfg->emu + off)));
- else if (len == 1)
- W_REG(osh, (uint8 *) ((ulong) cfg->pci + off),
- *(uint8 *) ((ulong) cfg->emu + off));
- }
- sb_setcoreidx(sbh, oldidx);
-}
-
-/*
- * Functions for accessing translated SB configuration space
- */
-static int
-sb_read_config(sb_t * sbh, uint bus, uint dev, uint func, uint off, void *buf,
- int len)
-{
- pci_config_regs *cfg;
-
- if (dev >= SB_MAXCORES || func >= MAXFUNCS
- || (off + len) > sizeof(pci_config_regs))
- return -1;
- cfg = sb_pci_cfg[dev][func].emu;
-
- ASSERT(ISALIGNED(off, len));
- ASSERT(ISALIGNED((uintptr) buf, len));
-
- /* use special config space if the device does not exist */
- if (!cfg)
- cfg = &sb_pci_null;
- /* sync emulation with real PCI config if necessary */
- else if (sb_pci_cfg[dev][func].pci)
- sb_pcid_read_config(sbh, dev, &sb_pci_cfg[dev][func], off, len);
-
- if (len == 4)
- *((uint32 *) buf) = ltoh32(*((uint32 *) ((ulong) cfg + off)));
- else if (len == 2)
- *((uint16 *) buf) = ltoh16(*((uint16 *) ((ulong) cfg + off)));
- else if (len == 1)
- *((uint8 *) buf) = *((uint8 *) ((ulong) cfg + off));
- else
- return -1;
-
- return 0;
-}
-
-static int
-sb_write_config(sb_t * sbh, uint bus, uint dev, uint func, uint off, void *buf,
- int len)
-{
- uint coreidx;
- void *regs;
- pci_config_regs *cfg;
- osl_t *osh;
- sb_bar_cfg_t *bar;
-
- if (dev >= SB_MAXCORES || func >= MAXFUNCS
- || (off + len) > sizeof(pci_config_regs))
- return -1;
- cfg = sb_pci_cfg[dev][func].emu;
- if (!cfg)
- return -1;
-
- ASSERT(ISALIGNED(off, len));
- ASSERT(ISALIGNED((uintptr) buf, len));
-
- osh = sb_osh(sbh);
-
- /* Emulate BAR sizing */
- if (off >= OFFSETOF(pci_config_regs, base[0]) &&
- off <= OFFSETOF(pci_config_regs, base[3]) &&
- len == 4 && *((uint32 *) buf) == ~0) {
- coreidx = sb_coreidx(sbh);
- if ((regs = sb_setcoreidx(sbh, dev))) {
- bar = sb_pci_cfg[dev][func].bar;
- /* Highest numbered address match register */
- if (off == OFFSETOF(pci_config_regs, base[0]))
- cfg->base[0] = ~(bar->size0 - 1);
- else if (off == OFFSETOF(pci_config_regs, base[1])
- && bar->n >= 1)
- cfg->base[1] = ~(bar->size1 - 1);
- else if (off == OFFSETOF(pci_config_regs, base[2])
- && bar->n >= 2)
- cfg->base[2] = ~(bar->size2 - 1);
- else if (off == OFFSETOF(pci_config_regs, base[3])
- && bar->n >= 3)
- cfg->base[3] = ~(bar->size3 - 1);
- }
- sb_setcoreidx(sbh, coreidx);
- } else if (len == 4)
- *((uint32 *) ((ulong) cfg + off)) = htol32(*((uint32 *) buf));
- else if (len == 2)
- *((uint16 *) ((ulong) cfg + off)) = htol16(*((uint16 *) buf));
- else if (len == 1)
- *((uint8 *) ((ulong) cfg + off)) = *((uint8 *) buf);
- else
- return -1;
-
- /* sync emulation with real PCI config if necessary */
- if (sb_pci_cfg[dev][func].pci)
- sb_pcid_write_config(sbh, dev, &sb_pci_cfg[dev][func], off,
- len);
-
- return 0;
-}
-
-int
-sbpci_read_config(sb_t * sbh, uint bus, uint dev, uint func, uint off,
- void *buf, int len)
-{
- if (bus == 0)
- return sb_read_config(sbh, bus, dev, func, off, buf, len);
- else
- return extpci_read_config(sbh, bus, dev, func, off, buf, len);
-}
-
-int
-sbpci_write_config(sb_t * sbh, uint bus, uint dev, uint func, uint off,
- void *buf, int len)
-{
- if (bus == 0)
- return sb_write_config(sbh, bus, dev, func, off, buf, len);
- else
- return extpci_write_config(sbh, bus, dev, func, off, buf, len);
-}
-
-void sbpci_ban(uint16 core)
-{
- if (pci_banned < ARRAYSIZE(pci_ban))
- pci_ban[pci_banned++] = core;
-}
-
-/*
- * Initiliaze PCI core. Return 0 after a successful initialization.
- * Otherwise return -1 to indicate there is no PCI core and return 1
- * to indicate PCI core is disabled.
- */
-int __init sbpci_init_pci(sb_t * sbh)
-{
- uint chip, chiprev, chippkg, host;
- uint32 boardflags;
- sbpciregs_t *pci;
- sbconfig_t *sb;
- uint32 val;
- int ret = 0;
- char *hbslot;
- osl_t *osh;
-
- chip = sb_chip(sbh);
- chiprev = sb_chiprev(sbh);
- chippkg = sb_chippkg(sbh);
-
- osh = sb_osh(sbh);
-
- if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0))) {
- printk("PCI: no core\n");
- pci_disabled = TRUE;
- return -1;
- }
-
- if ((chip == 0x4310) && (chiprev == 0))
- pci_disabled = TRUE;
-
- sb = (sbconfig_t *) ((ulong) pci + SBCONFIGOFF);
-
- boardflags = (uint32) getintvar(NULL, "boardflags");
-
- /*
- * The 200-pin BCM4712 package does not bond out PCI. Even when
- * PCI is bonded out, some boards may leave the pins
- * floating.
- */
- if (((chip == BCM4712_CHIP_ID) &&
- ((chippkg == BCM4712SMALL_PKG_ID) ||
- (chippkg == BCM4712MID_PKG_ID))) || (boardflags & BFL_NOPCI))
- pci_disabled = TRUE;
-
- /* Enable the core */
- sb_core_reset(sbh, 0, 0);
-
- /*
- * If the PCI core should not be touched (disabled, not bonded
- * out, or pins floating), do not even attempt to access core
- * registers. Otherwise, try to determine if it is in host
- * mode.
- */
- if (pci_disabled)
- host = 0;
- else
- host = !BUSPROBE(val, &pci->control);
-
- if (!host) {
- ret = 1;
-
- /* Disable PCI interrupts in client mode */
- W_REG(osh, &sb->sbintvec, 0);
-
- /* Disable the PCI bridge in client mode */
- sbpci_ban(SB_PCI);
- sb_core_disable(sbh, 0);
-
- printk("PCI: Disabled\n");
- } else {
- printk("PCI: Initializing host\n");
-
- /* Disable PCI SBReqeustTimeout for BCM4785 */
- if (chip == BCM4785_CHIP_ID) {
- AND_REG(osh, &sb->sbimconfiglow, ~0x00000070);
- sb_commit(sbh);
- }
-
- /* Reset the external PCI bus and enable the clock */
- W_REG(osh, &pci->control, 0x5); /* enable the tristate drivers */
- W_REG(osh, &pci->control, 0xd); /* enable the PCI clock */
- OSL_DELAY(150); /* delay > 100 us */
- W_REG(osh, &pci->control, 0xf); /* deassert PCI reset */
- /* Use internal arbiter and park REQ/GRNT at external master 0 */
- W_REG(osh, &pci->arbcontrol, PCI_INT_ARB);
- OSL_DELAY(1); /* delay 1 us */
- if (sb_corerev(sbh) >= 8) {
- val = getintvar(NULL, "parkid");
- ASSERT(val <= PCI_PARKID_LAST);
- OR_REG(osh, &pci->arbcontrol, val << PCI_PARKID_SHIFT);
- OSL_DELAY(1);
- }
-
- /* Enable CardBusMode */
- cardbus = getintvar(NULL, "cardbus") == 1;
- if (cardbus) {
- printk("PCI: Enabling CardBus\n");
- /* GPIO 1 resets the CardBus device on bcm94710ap */
- sb_gpioout(sbh, 1, 1, GPIO_DRV_PRIORITY);
- sb_gpioouten(sbh, 1, 1, GPIO_DRV_PRIORITY);
- W_REG(osh, &pci->sprom[0],
- R_REG(osh, &pci->sprom[0]) | 0x400);
- }
-
- /* 64 MB I/O access window */
- W_REG(osh, &pci->sbtopci0, SBTOPCI_IO);
- /* 64 MB configuration access window */
- W_REG(osh, &pci->sbtopci1, SBTOPCI_CFG0);
- /* 1 GB memory access window */
- W_REG(osh, &pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
-
- /* Host bridge slot # nvram overwrite */
- if ((hbslot = nvram_get("pcihbslot"))) {
- pci_hbslot = simple_strtoul(hbslot, NULL, 0);
- ASSERT(pci_hbslot < PCI_MAX_DEVICES);
- }
-
- /* Enable PCI bridge BAR0 prefetch and burst */
- val = 6;
- sbpci_write_config(sbh, 1, pci_hbslot, 0, PCI_CFG_CMD, &val,
- sizeof(val));
-
- /* Enable PCI interrupts */
- W_REG(osh, &pci->intmask, PCI_INTA);
- }
-
- return ret;
-}
-
-/*
- * Get the PCI region address and size information.
- */
-static void __init
-sbpci_init_regions(sb_t * sbh, uint func, pci_config_regs * cfg,
- sb_bar_cfg_t * bar)
-{
- osl_t *osh;
- uint16 coreid;
- void *regs;
- sbconfig_t *sb;
- uint32 base;
-
- osh = sb_osh(sbh);
- coreid = sb_coreid(sbh);
- regs = sb_coreregs(sbh);
- sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF);
-
- switch (coreid) {
- case SB_USB20H:
- base = htol32(sb_base(R_REG(osh, &sb->sbadmatch0)));
-
- cfg->base[0] = func == 0 ? base : base + 0x800; /* OHCI/EHCI */
- cfg->base[1] = 0;
- cfg->base[2] = 0;
- cfg->base[3] = 0;
- cfg->base[4] = 0;
- cfg->base[5] = 0;
- bar->n = 1;
- bar->size0 = func == 0 ? 0x200 : 0x100; /* OHCI/EHCI */
- bar->size1 = 0;
- bar->size2 = 0;
- bar->size3 = 0;
- break;
- default:
- cfg->base[0] = htol32(sb_base(R_REG(osh, &sb->sbadmatch0)));
- cfg->base[1] = htol32(sb_base(R_REG(osh, &sb->sbadmatch1)));
- cfg->base[2] = htol32(sb_base(R_REG(osh, &sb->sbadmatch2)));
- cfg->base[3] = htol32(sb_base(R_REG(osh, &sb->sbadmatch3)));
- cfg->base[4] = 0;
- cfg->base[5] = 0;
- bar->n =
- (R_REG(osh, &sb->sbidlow) & SBIDL_AR_MASK) >>
- SBIDL_AR_SHIFT;
- bar->size0 = sb_size(R_REG(osh, &sb->sbadmatch0));
- bar->size1 = sb_size(R_REG(osh, &sb->sbadmatch1));
- bar->size2 = sb_size(R_REG(osh, &sb->sbadmatch2));
- bar->size3 = sb_size(R_REG(osh, &sb->sbadmatch3));
- break;
- }
-}
-
-/*
- * Construct PCI config spaces for SB cores so that they
- * can be accessed as if they were PCI devices.
- */
-static void __init sbpci_init_cores(sb_t * sbh)
-{
- uint chiprev, coreidx, i;
- sbconfig_t *sb;
- pci_config_regs *cfg, *pci;
- sb_bar_cfg_t *bar;
- void *regs;
- osl_t *osh;
- uint16 vendor, device;
- uint16 coreid;
- uint8 class, subclass, progif;
- uint dev;
- uint8 header;
- uint func;
-
- chiprev = sb_chiprev(sbh);
- coreidx = sb_coreidx(sbh);
-
- osh = sb_osh(sbh);
-
- /* Scan the SB bus */
- bzero(sb_config_regs, sizeof(sb_config_regs));
- bzero(sb_bar_cfg, sizeof(sb_bar_cfg));
- bzero(sb_pci_cfg, sizeof(sb_pci_cfg));
- memset(&sb_pci_null, -1, sizeof(sb_pci_null));
- cfg = sb_config_regs;
- bar = sb_bar_cfg;
- for (dev = 0; dev < SB_MAXCORES; dev++) {
- /* Check if the core exists */
- if (!(regs = sb_setcoreidx(sbh, dev)))
- continue;
- sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF);
-
- /* Check if this core is banned */
- coreid = sb_coreid(sbh);
- for (i = 0; i < pci_banned; i++)
- if (coreid == pci_ban[i])
- break;
- if (i < pci_banned)
- continue;
-
- for (func = 0; func < MAXFUNCS; ++func) {
- /* Make sure we won't go beyond the limit */
- if (cfg >= &sb_config_regs[SB_MAXCORES]) {
- printk("PCI: too many emulated devices\n");
- goto done;
- }
-
- /* Convert core id to pci id */
- if (sb_corepciid
- (sbh, func, &vendor, &device, &class, &subclass,
- &progif, &header))
- continue;
-
- /*
- * Differentiate real PCI config from emulated.
- * non zero 'pci' indicate there is a real PCI config space
- * for this device.
- */
- switch (device) {
- case BCM47XX_GIGETH_ID:
- pci =
- (pci_config_regs *) ((uint32) regs + 0x800);
- break;
- case BCM47XX_SATAXOR_ID:
- pci =
- (pci_config_regs *) ((uint32) regs + 0x400);
- break;
- case BCM47XX_ATA100_ID:
- pci =
- (pci_config_regs *) ((uint32) regs + 0x800);
- break;
- default:
- pci = NULL;
- break;
- }
- /* Supported translations */
- cfg->vendor = htol16(vendor);
- cfg->device = htol16(device);
- cfg->rev_id = chiprev;
- cfg->prog_if = progif;
- cfg->sub_class = subclass;
- cfg->base_class = class;
- cfg->header_type = header;
- sbpci_init_regions(sbh, func, cfg, bar);
- /* Save core interrupt flag */
- cfg->int_pin =
- R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
- /* Save core interrupt assignment */
- cfg->int_line = sb_irq(sbh);
- /* Indicate there is no SROM */
- *((uint32 *) & cfg->sprom_control) = 0xffffffff;
-
- /* Point to the PCI config spaces */
- sb_pci_cfg[dev][func].emu = cfg;
- sb_pci_cfg[dev][func].pci = pci;
- sb_pci_cfg[dev][func].bar = bar;
- cfg++;
- bar++;
- }
- }
-
- done:
- sb_setcoreidx(sbh, coreidx);
-}
-
-/*
- * Initialize PCI core and construct PCI config spaces for SB cores.
- * Must propagate sbpci_init_pci() return value to the caller to let
- * them know the PCI core initialization status.
- */
-int __init sbpci_init(sb_t * sbh)
-{
- int status = sbpci_init_pci(sbh);
- sbpci_init_cores(sbh);
- return status;
-}
+++ /dev/null
-/*
- * Misc utility routines for accessing chip-specific features
- * of the SiliconBackplane-based Broadcom chips.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#include <typedefs.h>
-#include <bcmdefs.h>
-#include <osl.h>
-#include <sbutils.h>
-#include <bcmdevs.h>
-#include <sbconfig.h>
-#include <sbchipc.h>
-#include <sbextif.h>
-#include <sbpci.h>
-#include <sbpcie.h>
-#include <pcicfg.h>
-#include <sbpcmcia.h>
-#include <sbsocram.h>
-#include <bcmnvram.h>
-#include <bcmsrom.h>
-#include <hndpmu.h>
-
-/* debug/trace */
-#define SB_ERROR(args)
-
-#ifdef BCMDBG
-#define SB_MSG(args) printf args
-#else
-#define SB_MSG(args)
-#endif /* BCMDBG */
-
-typedef uint32(*sb_intrsoff_t) (void *intr_arg);
-typedef void (*sb_intrsrestore_t) (void *intr_arg, uint32 arg);
-typedef bool(*sb_intrsenabled_t) (void *intr_arg);
-
-typedef struct gpioh_item {
- void *arg;
- bool level;
- gpio_handler_t handler;
- uint32 event;
- struct gpioh_item *next;
-} gpioh_item_t;
-
-/* misc sb info needed by some of the routines */
-typedef struct sb_info {
-
- struct sb_pub sb; /* back plane public state (must be first field) */
-
- void *osh; /* osl os handle */
- void *sdh; /* bcmsdh handle */
-
- void *curmap; /* current regs va */
- void *regs[SB_MAXCORES]; /* other regs va */
-
- uint curidx; /* current core index */
- uint dev_coreid; /* the core provides driver functions */
-
- bool memseg; /* flag to toggle MEM_SEG register */
-
- uint gpioidx; /* gpio control core index */
- uint gpioid; /* gpio control coretype */
-
- uint numcores; /* # discovered cores */
- uint coreid[SB_MAXCORES]; /* id of each core */
-
- void *intr_arg; /* interrupt callback function arg */
- sb_intrsoff_t intrsoff_fn; /* turns chip interrupts off */
- sb_intrsrestore_t intrsrestore_fn; /* restore chip interrupts */
- sb_intrsenabled_t intrsenabled_fn; /* check if interrupts are enabled */
-
- uint8 pciecap_lcreg_offset; /* PCIE capability LCreg offset in the config space */
- bool pr42767_war;
- uint8 pcie_polarity;
- bool pcie_war_ovr; /* Override ASPM/Clkreq settings */
-
- uint8 pmecap_offset; /* PM Capability offset in the config space */
- bool pmecap; /* Capable of generating PME */
-
- gpioh_item_t *gpioh_head; /* GPIO event handlers list */
-
- char *vars;
- uint varsz;
-} sb_info_t;
-
-/* local prototypes */
-static sb_info_t *sb_doattach(sb_info_t * si, uint devid, osl_t * osh,
- void *regs, uint bustype, void *sdh,
- char **vars, uint * varsz);
-static void sb_scan(sb_info_t * si);
-static uint _sb_coreidx(sb_info_t * si);
-static uint sb_pcidev2chip(uint pcidev);
-static uint sb_chip2numcores(uint chip);
-static bool sb_ispcie(sb_info_t * si);
-static uint8 sb_find_pci_capability(sb_info_t * si, uint8 req_cap_id,
- uchar * buf, uint32 * buflen);
-static int sb_pci_fixcfg(sb_info_t * si);
-/* routines to access mdio slave device registers */
-static int sb_pcie_mdiowrite(sb_info_t * si, uint physmedia, uint readdr,
- uint val);
-static int sb_pcie_mdioread(sb_info_t * si, uint physmedia, uint readdr,
- uint * ret_val);
-
-/* dev path concatenation util */
-static char *sb_devpathvar(sb_t * sbh, char *var, int len, const char *name);
-
-/* WARs */
-static void sb_war43448(sb_t * sbh);
-static void sb_war43448_aspm(sb_t * sbh);
-static void sb_war32414_forceHT(sb_t * sbh, bool forceHT);
-static void sb_war30841(sb_info_t * si);
-static void sb_war42767(sb_t * sbh);
-static void sb_war42767_clkreq(sb_t * sbh);
-
-/* delay needed between the mdio control/ mdiodata register data access */
-#define PR28829_DELAY() OSL_DELAY(10)
-
-/* size that can take bitfielddump */
-#define BITFIELD_DUMP_SIZE 32
-
-/* global variable to indicate reservation/release of gpio's */
-static uint32 sb_gpioreservation = 0;
-
-/* global flag to prevent shared resources from being initialized multiple times in sb_attach() */
-static bool sb_onetimeinit = FALSE;
-
-#define SB_INFO(sbh) (sb_info_t*)(uintptr)sbh
-#define SET_SBREG(si, r, mask, val) \
- W_SBREG((si), (r), ((R_SBREG((si), (r)) & ~(mask)) | (val)))
-#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && \
- ISALIGNED((x), SB_CORE_SIZE))
-#define GOODREGS(regs) ((regs) && ISALIGNED((uintptr)(regs), SB_CORE_SIZE))
-#define REGS2SB(va) (sbconfig_t*) ((int8*)(va) + SBCONFIGOFF)
-#define BADCOREADDR 0
-#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES)
-#define BADIDX (SB_MAXCORES+1)
-#define NOREV -1 /* Invalid rev */
-
-#define PCI(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCI))
-#define PCIE(si) ((BUSTYPE(si->sb.bustype) == PCI_BUS) && (si->sb.buscoretype == SB_PCIE))
-#define PCMCIA(si) ((BUSTYPE(si->sb.bustype) == PCMCIA_BUS) && (si->memseg == TRUE))
-
-/* sonicsrev */
-#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT)
-#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT)
-
-#define R_SBREG(si, sbr) sb_read_sbreg((si), (sbr))
-#define W_SBREG(si, sbr, v) sb_write_sbreg((si), (sbr), (v))
-#define AND_SBREG(si, sbr, v) W_SBREG((si), (sbr), (R_SBREG((si), (sbr)) & (v)))
-#define OR_SBREG(si, sbr, v) W_SBREG((si), (sbr), (R_SBREG((si), (sbr)) | (v)))
-
-/*
- * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
- * after core switching to avoid invalid register accesss inside ISR.
- */
-#define INTR_OFF(si, intr_val) \
- if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
- intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
-#define INTR_RESTORE(si, intr_val) \
- if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
- (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
-
-/* dynamic clock control defines */
-#define LPOMINFREQ 25000 /* low power oscillator min */
-#define LPOMAXFREQ 43000 /* low power oscillator max */
-#define XTALMINFREQ 19800000 /* 20 MHz - 1% */
-#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */
-#define PCIMINFREQ 25000000 /* 25 MHz */
-#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */
-
-#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */
-#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */
-
-/* force HT war check */
-#define FORCEHT_WAR32414(si) \
- (((PCIE(si)) && (si->sb.chip == BCM4311_CHIP_ID) && ((si->sb.chiprev <= 1))) || \
- ((PCI(si) || PCIE(si)) && (si->sb.chip == BCM4321_CHIP_ID) && (si->sb.chiprev <= 3)))
-
-#define PCIE_ASPMWARS(si) \
- ((PCIE(si)) && ((si->sb.buscorerev >= 3) && (si->sb.buscorerev <= 5)))
-
-/* GPIO Based LED powersave defines */
-#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */
-#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */
-
-#define DEFAULT_GPIOTIMERVAL ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)
-
-static uint32 sb_read_sbreg(sb_info_t * si, volatile uint32 * sbr)
-{
- uint8 tmp;
- uint32 val, intr_val = 0;
-
- /*
- * compact flash only has 11 bits address, while we needs 12 bits address.
- * MEM_SEG will be OR'd with other 11 bits address in hardware,
- * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
- * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
- */
- if (PCMCIA(si)) {
- INTR_OFF(si, intr_val);
- tmp = 1;
- OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
- sbr = (volatile uint32 *)((uintptr) sbr & ~(1 << 11)); /* mask out bit 11 */
- }
-
- val = R_REG(si->osh, sbr);
-
- if (PCMCIA(si)) {
- tmp = 0;
- OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
- INTR_RESTORE(si, intr_val);
- }
-
- return (val);
-}
-
-static void sb_write_sbreg(sb_info_t * si, volatile uint32 * sbr, uint32 v)
-{
- uint8 tmp;
- volatile uint32 dummy;
- uint32 intr_val = 0;
-
- /*
- * compact flash only has 11 bits address, while we needs 12 bits address.
- * MEM_SEG will be OR'd with other 11 bits address in hardware,
- * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
- * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
- */
- if (PCMCIA(si)) {
- INTR_OFF(si, intr_val);
- tmp = 1;
- OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
- sbr = (volatile uint32 *)((uintptr) sbr & ~(1 << 11)); /* mask out bit 11 */
- }
-
- if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
-#ifdef IL_BIGENDIAN
- dummy = R_REG(si->osh, sbr);
- W_REG(si->osh, ((volatile uint16 *)sbr + 1),
- (uint16) ((v >> 16) & 0xffff));
- dummy = R_REG(si->osh, sbr);
- W_REG(si->osh, (volatile uint16 *)sbr, (uint16) (v & 0xffff));
-#else
- dummy = R_REG(si->osh, sbr);
- W_REG(si->osh, (volatile uint16 *)sbr, (uint16) (v & 0xffff));
- dummy = R_REG(si->osh, sbr);
- W_REG(si->osh, ((volatile uint16 *)sbr + 1),
- (uint16) ((v >> 16) & 0xffff));
-#endif /* IL_BIGENDIAN */
- } else
- W_REG(si->osh, sbr, v);
-
- if (PCMCIA(si)) {
- tmp = 0;
- OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
- INTR_RESTORE(si, intr_val);
- }
-}
-
-/*
- * Allocate a sb handle.
- * devid - pci device id (used to determine chip#)
- * osh - opaque OS handle
- * regs - virtual address of initial core registers
- * bustype - pci/pcmcia/sb/sdio/etc
- * vars - pointer to a pointer area for "environment" variables
- * varsz - pointer to int to return the size of the vars
- */
-sb_t *sb_attach(uint devid, osl_t * osh, void *regs,
- uint bustype, void *sdh, char **vars,
- uint * varsz) {
- sb_info_t *si;
-
- /* alloc sb_info_t */
- if ((si = MALLOC(osh, sizeof(sb_info_t))) == NULL) {
- SB_ERROR(("sb_attach: malloc failed! malloced %d bytes\n",
- MALLOCED(osh)));
- return (NULL);
- }
-
- if (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz) ==
- NULL) {
- MFREE(osh, si, sizeof(sb_info_t));
- return (NULL);
- }
- si->vars = vars ? *vars : NULL;
- si->varsz = varsz ? *varsz : 0;
-
- return (sb_t *) si;
-}
-
-/* Using sb_kattach depends on SB_BUS support, either implicit */
-/* no limiting BCMBUSTYPE value) or explicit (value is SB_BUS). */
-#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS)
-
-/* global kernel resource */
-static sb_info_t ksi;
-
-/* generic kernel variant of sb_attach() */
-sb_t *BCMINITFN(sb_kattach) (osl_t * osh) {
- static bool ksi_attached = FALSE;
- uint32 *regs;
-
- if (!ksi_attached) {
- uint32 cid;
-
- regs = (uint32 *) REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
- cid = R_REG(osh, (uint32 *) regs);
- if (((cid & CID_ID_MASK) == BCM4712_CHIP_ID) &&
- ((cid & CID_PKG_MASK) != BCM4712LARGE_PKG_ID) &&
- ((cid & CID_REV_MASK) <= (3 << CID_REV_SHIFT))) {
- uint32 *scc, val;
-
- scc =
- (uint32 *) ((uchar *) regs +
- OFFSETOF(chipcregs_t, slow_clk_ctl));
- val = R_REG(osh, scc);
- SB_ERROR((" initial scc = 0x%x\n", val));
- val |= SCC_SS_XTAL;
- W_REG(osh, scc, val);
- }
-
- if (sb_doattach(&ksi, BCM4710_DEVICE_ID, osh, (void *)regs, SB_BUS, NULL,
- osh != SB_OSH ? &ksi.vars : NULL,
- osh != SB_OSH ? &ksi.varsz : NULL) == NULL)
- return NULL;
- ksi_attached = TRUE;
- }
-
- return &ksi.sb;
-}
-#endif /* !BCMBUSTYPE || (BCMBUSTYPE == SB_BUS) */
-
-static sb_info_t *BCMINITFN(sb_doattach) (sb_info_t * si, uint devid,
- osl_t * osh, void *regs,
- uint bustype, void *sdh,
- char **vars, uint * varsz) {
- uint origidx;
- chipcregs_t *cc;
- sbconfig_t *sb;
- uint32 w;
- char *pvars;
-
- ASSERT(GOODREGS(regs));
-
- bzero((uchar *) si, sizeof(sb_info_t));
- si->sb.buscoreidx = si->gpioidx = BADIDX;
-
- si->curmap = regs;
- si->sdh = sdh;
- si->osh = osh;
-
- /* check to see if we are a sb core mimic'ing a pci core */
- if (bustype == PCI_BUS) {
- if (OSL_PCI_READ_CONFIG
- (si->osh, PCI_SPROM_CONTROL,
- sizeof(uint32)) == 0xffffffff) {
- SB_ERROR(("%s: incoming bus is PCI but it's a lie, switching to SB " "devid:0x%x\n", __FUNCTION__, devid));
- bustype = SB_BUS;
- }
- }
- si->sb.bustype = bustype;
- if (si->sb.bustype != BUSTYPE(si->sb.bustype)) {
- SB_ERROR(("sb_doattach: bus type %d does not match configured bus type %d\n", si->sb.bustype, BUSTYPE(si->sb.bustype)));
- return NULL;
- }
-
- /* need to set memseg flag for CF card first before any sb registers access */
- if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS)
- si->memseg = TRUE;
-
- /* kludge to enable the clock on the 4306 which lacks a slowclock */
- if (BUSTYPE(si->sb.bustype) == PCI_BUS && !sb_ispcie(si))
- sb_clkctl_xtal(&si->sb, XTAL | PLL, ON);
-
- if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
- w = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32));
- if (!GOODCOREADDR(w))
- OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN,
- sizeof(uint32), SB_ENUM_BASE);
- }
-
- /* initialize current core index value */
- si->curidx = _sb_coreidx(si);
-
- if (si->curidx == BADIDX) {
- SB_ERROR(("sb_doattach: bad core index\n"));
- return NULL;
- }
-
- /* get sonics backplane revision */
- sb = REGS2SB(regs);
- si->sb.sonicsrev =
- (R_SBREG(si, &sb->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT;
- /* keep and reuse the initial register mapping */
- origidx = si->curidx;
- if (BUSTYPE(si->sb.bustype) == SB_BUS)
- si->regs[origidx] = regs;
-
- /* is core-0 a chipcommon core? */
- si->numcores = 1;
- cc = (chipcregs_t *) sb_setcoreidx(&si->sb, 0);
- if (sb_coreid(&si->sb) != SB_CC)
- cc = NULL;
-
- /* determine chip id and rev */
- if (cc) {
- /* chip common core found! */
- si->sb.chip = R_REG(si->osh, &cc->chipid) & CID_ID_MASK;
- si->sb.chiprev =
- (R_REG(si->osh, &cc->chipid) & CID_REV_MASK) >>
- CID_REV_SHIFT;
- si->sb.chippkg =
- (R_REG(si->osh, &cc->chipid) & CID_PKG_MASK) >>
- CID_PKG_SHIFT;
- } else {
- /* no chip common core -- must convert device id to chip id */
- if ((si->sb.chip = sb_pcidev2chip(devid)) == 0) {
- SB_ERROR(("sb_doattach: unrecognized device id 0x%04x\n", devid));
- sb_setcoreidx(&si->sb, origidx);
- return NULL;
- }
- }
-
- /* get chipcommon rev */
- si->sb.ccrev = cc ? (int)sb_corerev(&si->sb) : NOREV;
-
- /* get chipcommon capabilites */
- si->sb.cccaps = cc ? R_REG(si->osh, &cc->capabilities) : 0;
-
- /* determine numcores */
- if (cc && ((si->sb.ccrev == 4) || (si->sb.ccrev >= 6)))
- si->numcores =
- (R_REG(si->osh, &cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
- else
- si->numcores = sb_chip2numcores(si->sb.chip);
-
- /* return to original core */
- sb_setcoreidx(&si->sb, origidx);
-
- /* sanity checks */
- ASSERT(si->sb.chip);
-
- /* scan for cores */
- sb_scan(si);
-
- /* fixup necessary chip/core configurations */
- if (BUSTYPE(si->sb.bustype) == PCI_BUS && sb_pci_fixcfg(si)) {
- SB_ERROR(("sb_doattach: sb_pci_fixcfg failed\n"));
- return NULL;
- }
-
- /* Init nvram from sprom/otp if they exist */
- if (srom_var_init
- (&si->sb, BUSTYPE(si->sb.bustype), regs, si->osh, vars, varsz)) {
- SB_ERROR(("sb_doattach: srom_var_init failed: bad srom\n"));
- return (NULL);
- }
- pvars = vars ? *vars : NULL;
-
- /* PMU specific initializations */
- if ((si->sb.cccaps & CC_CAP_PMU) && !sb_onetimeinit) {
- sb_pmu_init(&si->sb, si->osh);
- /* Find out Crystal frequency and init PLL */
- sb_pmu_pll_init(&si->sb, si->osh, getintvar(pvars, "xtalfreq"));
- /* Initialize PMU resources (up/dn timers, dep masks, etc.) */
- sb_pmu_res_init(&si->sb, si->osh);
- }
- if (cc == NULL) {
- /*
- * The chip revision number is hardwired into all
- * of the pci function config rev fields and is
- * independent from the individual core revision numbers.
- * For example, the "A0" silicon of each chip is chip rev 0.
- * For PCMCIA we get it from the CIS instead.
- */
- if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
- ASSERT(vars);
- si->sb.chiprev = getintvar(*vars, "chiprev");
- } else if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
- w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_REV,
- sizeof(uint32));
- si->sb.chiprev = w & 0xff;
- } else
- si->sb.chiprev = 0;
- }
-
- if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
- w = getintvar(pvars, "regwindowsz");
- si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
- }
- /* gpio control core is required */
- if (!GOODIDX(si->gpioidx)) {
- SB_ERROR(("sb_doattach: gpio control core not found\n"));
- return NULL;
- }
-
- /* get boardtype and boardrev */
- switch (BUSTYPE(si->sb.bustype)) {
- case PCI_BUS:
- /* do a pci config read to get subsystem id and subvendor id */
- w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_SVID, sizeof(uint32));
- /* Let nvram variables override subsystem Vend/ID */
- if ((si->sb.boardvendor =
- (uint16) sb_getdevpathintvar(&si->sb, "boardvendor")) == 0)
- si->sb.boardvendor = w & 0xffff;
- else
- SB_ERROR(("Overriding boardvendor: 0x%x instead of 0x%x\n", si->sb.boardvendor, w & 0xffff));
- if ((si->sb.boardtype =
- (uint16) sb_getdevpathintvar(&si->sb, "boardtype")) == 0)
- si->sb.boardtype = (w >> 16) & 0xffff;
- else
- SB_ERROR(("Overriding boardtype: 0x%x instead of 0x%x\n", si->sb.boardtype, (w >> 16) & 0xffff));
- break;
-
- case PCMCIA_BUS:
- si->sb.boardvendor = getintvar(pvars, "manfid");
- si->sb.boardtype = getintvar(pvars, "prodid");
- break;
-
- case SB_BUS:
- case JTAG_BUS:
- si->sb.boardvendor = VENDOR_BROADCOM;
- if (pvars == NULL
- || ((si->sb.boardtype = getintvar(pvars, "prodid")) == 0))
- if ((si->sb.boardtype =
- getintvar(NULL, "boardtype")) == 0)
- si->sb.boardtype = 0xffff;
- break;
- }
-
- if (si->sb.boardtype == 0) {
- SB_ERROR(("sb_doattach: unknown board type\n"));
- ASSERT(si->sb.boardtype);
- }
-
- si->sb.boardflags = getintvar(pvars, "boardflags");
-
- /* setup the GPIO based LED powersave register */
- if (si->sb.ccrev >= 16) {
- if ((pvars == NULL) || ((w = getintvar(pvars, "leddc")) == 0))
- w = DEFAULT_GPIOTIMERVAL;
- sb_corereg(&si->sb, SB_CC_IDX,
- OFFSETOF(chipcregs_t, gpiotimerval), ~0, w);
- }
-
- /* Determine if this board needs override */
- if (PCIE(si) && (si->sb.chip == BCM4321_CHIP_ID))
- si->pcie_war_ovr = ((si->sb.boardvendor == VENDOR_APPLE) &&
- ((uint8) getintvar(pvars, "sromrev") == 4)
- && ((uint8) getintvar(pvars, "boardrev") <=
- 0x71))
- || ((uint32) getintvar(pvars, "boardflags2") &
- BFL2_PCIEWAR_OVR);
-
- if (PCIE_ASPMWARS(si)) {
- sb_war43448_aspm((void *)si);
- sb_war42767_clkreq((void *)si);
- }
-
- if (FORCEHT_WAR32414(si)) {
- si->sb.pr32414 = TRUE;
- sb_clkctl_init(&si->sb);
- sb_war32414_forceHT(&si->sb, 1);
- }
-
- if (PCIE(si) && ((si->sb.buscorerev == 6) || (si->sb.buscorerev == 7)))
- si->sb.pr42780 = TRUE;
-
- if (PCIE_ASPMWARS(si))
- sb_pcieclkreq(&si->sb, 1, 0);
-
- if (PCIE(si) &&
- (((si->sb.chip == BCM4311_CHIP_ID) && (si->sb.chiprev == 2)) ||
- ((si->sb.chip == BCM4312_CHIP_ID) && (si->sb.chiprev == 0))))
- sb_set_initiator_to(&si->sb, 0x3,
- sb_findcoreidx(&si->sb, SB_D11, 0));
-
- /* Disable gpiopullup and gpiopulldown */
- if (!sb_onetimeinit && si->sb.ccrev >= 20) {
- cc = (chipcregs_t *) sb_setcore(&si->sb, SB_CC, 0);
- W_REG(osh, &cc->gpiopullup, 0);
- W_REG(osh, &cc->gpiopulldown, 0);
- sb_setcoreidx(&si->sb, origidx);
- }
-#ifdef BCMDBG
- /* clear any previous epidiag-induced target abort */
- sb_taclear(&si->sb);
-#endif /* BCMDBG */
-
-#ifdef HNDRTE
- sb_onetimeinit = TRUE;
-#endif
-
- return (si);
-}
-
-/* Enable/Disable clkreq for PCIE (4311B0/4321B1) */
-void sb_war42780_clkreq(sb_t * sbh, bool clkreq) {
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- /* Don't change clkreq value if serdespll war has not yet been applied */
- if (!si->pr42767_war && PCIE_ASPMWARS(si))
- return;
-
- sb_pcieclkreq(sbh, 1, (int32) clkreq);
-}
-
-static void BCMINITFN(sb_war43448) (sb_t * sbh) {
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- /* if not pcie bus, we're done */
- if (!PCIE(si) || !PCIE_ASPMWARS(si))
- return;
-
- /* Restore the polarity */
- if (si->pcie_polarity != 0)
- sb_pcie_mdiowrite((void *)(uintptr) & si->sb, MDIODATA_DEV_RX,
- SERDES_RX_CTRL, si->pcie_polarity);
-}
-
-static void BCMINITFN(sb_war43448_aspm) (sb_t * sbh) {
- uint32 w;
- uint16 val16, *reg16;
- sbpcieregs_t *pcieregs;
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- /* if not pcie bus, we're done */
- if (!PCIE(si) || !PCIE_ASPMWARS(si))
- return;
-
- /* no ASPM stuff on QT or VSIM */
- if (si->sb.chippkg == HDLSIM_PKG_ID || si->sb.chippkg == HWSIM_PKG_ID)
- return;
-
- pcieregs = (sbpcieregs_t *) sb_setcoreidx(sbh, si->sb.buscoreidx);
-
- /* Enable ASPM in the shadow SROM and Link control */
- reg16 = &pcieregs->sprom[SRSH_ASPM_OFFSET];
- val16 = R_REG(si->osh, reg16);
- if (!si->pcie_war_ovr)
- val16 |= SRSH_ASPM_ENB;
- else
- val16 &= ~SRSH_ASPM_ENB;
- W_REG(si->osh, reg16, val16);
-
- w = OSL_PCI_READ_CONFIG(si->osh, si->pciecap_lcreg_offset,
- sizeof(uint32));
- if (!si->pcie_war_ovr)
- w |= PCIE_ASPM_ENAB;
- else
- w &= ~PCIE_ASPM_ENAB;
- OSL_PCI_WRITE_CONFIG(si->osh, si->pciecap_lcreg_offset, sizeof(uint32),
- w);
-}
-
-static void BCMINITFN(sb_war32414_forceHT) (sb_t * sbh, bool forceHT) {
- sb_info_t *si;
- uint32 val = 0;
-
- si = SB_INFO(sbh);
-
- ASSERT(FORCEHT_WAR32414(si));
-
- if (forceHT)
- val = SYCC_HR;
- sb_corereg(sbh, SB_CC_IDX, OFFSETOF(chipcregs_t, system_clk_ctl),
- SYCC_HR, val);
-}
-
-uint sb_coreid(sb_t * sbh)
-{
- sb_info_t *si;
- sbconfig_t *sb;
-
- si = SB_INFO(sbh);
- sb = REGS2SB(si->curmap);
-
- return ((R_SBREG(si, &sb->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
-}
-
-uint sb_flag(sb_t * sbh)
-{
- sb_info_t *si;
- sbconfig_t *sb;
-
- si = SB_INFO(sbh);
- sb = REGS2SB(si->curmap);
-
- return R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
-}
-
-uint sb_coreidx(sb_t * sbh)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return (si->curidx);
-}
-
-static uint _sb_coreidx(sb_info_t * si)
-{
-
- sbconfig_t *sb;
- uint32 sbaddr = 0;
-
- ASSERT(si);
-
- switch (BUSTYPE(si->sb.bustype)) {
- case SB_BUS:
- sb = REGS2SB(si->curmap);
- sbaddr = sb_base(R_SBREG(si, &sb->sbadmatch0));
- break;
-
- case PCI_BUS:
- sbaddr =
- OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof(uint32));
- break;
-
- case PCMCIA_BUS:{
- uint8 tmp = 0;
-
- OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
- sbaddr = (uint) tmp << 12;
- OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
- sbaddr |= (uint) tmp << 16;
- OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
- sbaddr |= (uint) tmp << 24;
- break;
- }
-
-#ifdef BCMJTAG
- case JTAG_BUS:
- sbaddr = (uint32) si->curmap;
- break;
-#endif /* BCMJTAG */
-
- default:
- ASSERT(0);
- }
-
- if (!GOODCOREADDR(sbaddr))
- return BADIDX;
-
- return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE);
-}
-
-uint sb_corevendor(sb_t * sbh)
-{
- sb_info_t *si;
- sbconfig_t *sb;
-
- si = SB_INFO(sbh);
- sb = REGS2SB(si->curmap);
-
- return ((R_SBREG(si, &sb->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
-}
-
-uint sb_corerev(sb_t * sbh)
-{
- sb_info_t *si;
- sbconfig_t *sb;
- uint sbidh;
-
- si = SB_INFO(sbh);
- sb = REGS2SB(si->curmap);
- sbidh = R_SBREG(si, &sb->sbidhigh);
-
- return (SBCOREREV(sbidh));
-}
-
-void *sb_osh(sb_t * sbh)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return si->osh;
-}
-
-void sb_setosh(sb_t * sbh, osl_t * osh)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- if (si->osh != NULL) {
- SB_ERROR(("osh is already set....\n"));
- ASSERT(!si->osh);
- }
- si->osh = osh;
-}
-
-/* set sbtmstatelow core-specific flags */
-void sb_coreflags_wo(sb_t * sbh, uint32 mask, uint32 val)
-{
- sb_info_t *si;
- sbconfig_t *sb;
- uint32 w;
-
- si = SB_INFO(sbh);
- sb = REGS2SB(si->curmap);
-
- ASSERT((val & ~mask) == 0);
-
- /* mask and set */
- w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val;
- W_SBREG(si, &sb->sbtmstatelow, w);
-}
-
-/* set/clear sbtmstatelow core-specific flags */
-uint32 sb_coreflags(sb_t * sbh, uint32 mask, uint32 val)
-{
- sb_info_t *si;
- sbconfig_t *sb;
- uint32 w;
-
- si = SB_INFO(sbh);
- sb = REGS2SB(si->curmap);
-
- ASSERT((val & ~mask) == 0);
-
- /* mask and set */
- if (mask || val) {
- w = (R_SBREG(si, &sb->sbtmstatelow) & ~mask) | val;
- W_SBREG(si, &sb->sbtmstatelow, w);
- }
-
- /* return the new value
- * for write operation, the following readback ensures the completion of write opration.
- */
- return (R_SBREG(si, &sb->sbtmstatelow));
-}
-
-/* set/clear sbtmstatehigh core-specific flags */
-uint32 sb_coreflagshi(sb_t * sbh, uint32 mask, uint32 val)
-{
- sb_info_t *si;
- sbconfig_t *sb;
- uint32 w;
-
- si = SB_INFO(sbh);
- sb = REGS2SB(si->curmap);
-
- ASSERT((val & ~mask) == 0);
- ASSERT((mask & ~SBTMH_FL_MASK) == 0);
-
- /* mask and set */
- if (mask || val) {
- w = (R_SBREG(si, &sb->sbtmstatehigh) & ~mask) | val;
- W_SBREG(si, &sb->sbtmstatehigh, w);
- }
-
- /* return the new value */
- return (R_SBREG(si, &sb->sbtmstatehigh));
-}
-
-/* Run bist on current core. Caller needs to take care of core-specific bist hazards */
-int sb_corebist(sb_t * sbh)
-{
- uint32 sblo;
- sb_info_t *si;
- sbconfig_t *sb;
- int result = 0;
-
- si = SB_INFO(sbh);
- sb = REGS2SB(si->curmap);
-
- sblo = R_SBREG(si, &sb->sbtmstatelow);
- W_SBREG(si, &sb->sbtmstatelow, (sblo | SBTML_FGC | SBTML_BE));
-
- SPINWAIT(((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BISTD) == 0),
- 100000);
-
- if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BISTF)
- result = -1;
-
- W_SBREG(si, &sb->sbtmstatelow, sblo);
-
- return result;
-}
-
-bool sb_iscoreup(sb_t * sbh)
-{
- sb_info_t *si;
- sbconfig_t *sb;
-
- si = SB_INFO(sbh);
- sb = REGS2SB(si->curmap);
-
- return ((R_SBREG(si, &sb->sbtmstatelow) &
- (SBTML_RESET | SBTML_REJ_MASK | SBTML_CLK)) == SBTML_CLK);
-}
-
-/*
- * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
- * switch back to the original core, and return the new value.
- *
- * When using the silicon backplane, no fidleing with interrupts or core switches are needed.
- *
- * Also, when using pci/pcie, we can optimize away the core switching for pci registers
- * and (on newer pci cores) chipcommon registers.
- */
-uint sb_corereg(sb_t * sbh, uint coreidx, uint regoff, uint mask, uint val)
-{
- uint origidx = 0;
- uint32 *r = NULL;
- uint w;
- uint intr_val = 0;
- bool fast = FALSE;
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- ASSERT(GOODIDX(coreidx));
- ASSERT(regoff < SB_CORE_SIZE);
- ASSERT((val & ~mask) == 0);
-
-#if 0
- if (BUSTYPE(si->sb.bustype) == SB_BUS) {
- /* If internal bus, we can always get at everything */
- fast = TRUE;
- /* map if does not exist */
- if (!si->regs[coreidx]) {
- si->regs[coreidx] =
- (void *)REG_MAP(si->coresba[coreidx], SB_CORE_SIZE);
- ASSERT(GOODREGS(si->regs[coreidx]));
- }
- r = (uint32 *) ((uchar *) si->regs[coreidx] + regoff);
- } else if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
- /* If pci/pcie, we can get at pci/pcie regs and on newer cores to chipc */
-
- if ((si->coreid[coreidx] == SB_CC) &&
- ((si->sb.buscoretype == SB_PCIE)
- || (si->sb.buscorerev >= 13))) {
- /* Chipc registers are mapped at 12KB */
-
- fast = TRUE;
- r = (uint32 *) ((char *)si->curmap +
- PCI_16KB0_CCREGS_OFFSET + regoff);
- } else if (si->sb.buscoreidx == coreidx) {
- /* pci registers are at either in the last 2KB of an 8KB window
- * or, in pcie and pci rev 13 at 8KB
- */
- fast = TRUE;
- if ((si->sb.buscoretype == SB_PCIE)
- || (si->sb.buscorerev >= 13))
- r = (uint32 *) ((char *)si->curmap +
- PCI_16KB0_PCIREGS_OFFSET +
- regoff);
- else
- r = (uint32 *) ((char *)si->curmap +
- ((regoff >= SBCONFIGOFF) ?
- PCI_BAR0_PCISBR_OFFSET :
- PCI_BAR0_PCIREGS_OFFSET)
- + regoff);
- }
- }
-#endif
-
- if (!fast) {
- INTR_OFF(si, intr_val);
-
- /* save current core index */
- origidx = sb_coreidx(&si->sb);
-
- /* switch core */
- r = (uint32 *) ((uchar *) sb_setcoreidx(&si->sb, coreidx) +
- regoff);
- }
- ASSERT(r);
-
- /* mask and set */
- if (mask || val) {
- if (regoff >= SBCONFIGOFF) {
- w = (R_SBREG(si, r) & ~mask) | val;
- W_SBREG(si, r, w);
- } else {
- w = (R_REG(si->osh, r) & ~mask) | val;
- W_REG(si->osh, r, w);
- }
- }
-
- /* readback */
- if (regoff >= SBCONFIGOFF)
- w = R_SBREG(si, r);
- else {
- if ((si->sb.chip == BCM5354_CHIP_ID) &&
- (coreidx == SB_CC_IDX) &&
- (regoff == OFFSETOF(chipcregs_t, watchdog))) {
- w = val;
- } else
- w = R_REG(si->osh, r);
- }
-
- if (!fast) {
- /* restore core index */
- if (origidx != coreidx)
- sb_setcoreidx(&si->sb, origidx);
-
- INTR_RESTORE(si, intr_val);
- }
-
- return (w);
-}
-
-#define DWORD_ALIGN(x) (x & ~(0x03))
-#define BYTE_POS(x) (x & 0x3)
-#define WORD_POS(x) (x & 0x1)
-
-#define BYTE_SHIFT(x) (8 * BYTE_POS(x))
-#define WORD_SHIFT(x) (16 * WORD_POS(x))
-
-#define BYTE_VAL(a, x) ((a >> BYTE_SHIFT(x)) & 0xFF)
-#define WORD_VAL(a, x) ((a >> WORD_SHIFT(x)) & 0xFFFF)
-
-#define read_pci_cfg_byte(a) \
- (BYTE_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xff)
-
-#define read_pci_cfg_word(a) \
- (WORD_VAL(OSL_PCI_READ_CONFIG(si->osh, DWORD_ALIGN(a), 4), a) & 0xffff)
-
-/* return cap_offset if requested capability exists in the PCI config space */
-static uint8
-sb_find_pci_capability(sb_info_t * si, uint8 req_cap_id, uchar * buf,
- uint32 * buflen)
-{
- uint8 cap_id;
- uint8 cap_ptr = 0;
- uint32 bufsize;
- uint8 byte_val;
-
- if (BUSTYPE(si->sb.bustype) != PCI_BUS)
- goto end;
-
- /* check for Header type 0 */
- byte_val = read_pci_cfg_byte(PCI_CFG_HDR);
- if ((byte_val & 0x7f) != PCI_HEADER_NORMAL)
- goto end;
-
- /* check if the capability pointer field exists */
- byte_val = read_pci_cfg_byte(PCI_CFG_STAT);
- if (!(byte_val & PCI_CAPPTR_PRESENT))
- goto end;
-
- cap_ptr = read_pci_cfg_byte(PCI_CFG_CAPPTR);
- /* check if the capability pointer is 0x00 */
- if (cap_ptr == 0x00)
- goto end;
-
- /* loop thr'u the capability list and see if the pcie capabilty exists */
-
- cap_id = read_pci_cfg_byte(cap_ptr);
-
- while (cap_id != req_cap_id) {
- cap_ptr = read_pci_cfg_byte((cap_ptr + 1));
- if (cap_ptr == 0x00)
- break;
- cap_id = read_pci_cfg_byte(cap_ptr);
- }
- if (cap_id != req_cap_id) {
- goto end;
- }
- /* found the caller requested capability */
- if ((buf != NULL) && (buflen != NULL)) {
- uint8 cap_data;
-
- bufsize = *buflen;
- if (!bufsize)
- goto end;
- *buflen = 0;
- /* copy the cpability data excluding cap ID and next ptr */
- cap_data = cap_ptr + 2;
- if ((bufsize + cap_data) > SZPCR)
- bufsize = SZPCR - cap_data;
- *buflen = bufsize;
- while (bufsize--) {
- *buf = read_pci_cfg_byte(cap_data);
- cap_data++;
- buf++;
- }
- }
- end:
- return cap_ptr;
-}
-
-uint8 sb_pcieclkreq(sb_t * sbh, uint32 mask, uint32 val)
-{
- sb_info_t *si;
- uint32 reg_val;
- uint8 offset;
-
- si = SB_INFO(sbh);
-
- offset = si->pciecap_lcreg_offset;
- if (!offset)
- return 0;
-
- reg_val = OSL_PCI_READ_CONFIG(si->osh, offset, sizeof(uint32));
- /* set operation */
- if (mask) {
- if (val)
- reg_val |= PCIE_CLKREQ_ENAB;
- else
- reg_val &= ~PCIE_CLKREQ_ENAB;
- OSL_PCI_WRITE_CONFIG(si->osh, offset, sizeof(uint32), reg_val);
- reg_val = OSL_PCI_READ_CONFIG(si->osh, offset, sizeof(uint32));
- }
- if (reg_val & PCIE_CLKREQ_ENAB)
- return 1;
- else
- return 0;
-}
-
-#ifdef BCMDBG
-
-uint32 sb_pcielcreg(sb_t * sbh, uint32 mask, uint32 val)
-{
- sb_info_t *si;
- uint32 reg_val;
- uint8 offset;
-
- si = SB_INFO(sbh);
-
- if (!PCIE(si))
- return 0;
-
- offset = si->pciecap_lcreg_offset;
- if (!offset)
- return 0;
-
- /* set operation */
- if (mask)
- OSL_PCI_WRITE_CONFIG(si->osh, offset, sizeof(uint32), val);
-
- reg_val = OSL_PCI_READ_CONFIG(si->osh, offset, sizeof(uint32));
-
- return reg_val;
-}
-
-uint8 sb_pcieL1plldown(sb_t * sbh)
-{
- sb_info_t *si;
- uint intr_val = 0;
- uint origidx;
- uint32 reg_val;
-
- si = SB_INFO(sbh);
-
- if (!PCIE(si))
- return 0;
- if (!((si->sb.buscorerev == 3) || (si->sb.buscorerev == 4)))
- return 0;
-
- if (!sb_pcieclkreq((void *)(uintptr) sbh, 0, 0)) {
- SB_ERROR(("PCIEL1PLLDOWN requires Clkreq be enabled, so enable it\n"));
- sb_pcieclkreq((void *)(uintptr) sbh, 1, 1);
- }
- reg_val = sb_pcielcreg((void *)(uintptr) sbh, 0, 0);
- if (reg_val & PCIE_CAP_LCREG_ASPML0s) {
- SB_ERROR(("PCIEL1PLLDOWN requires L0s to be disabled\n"));
- reg_val &= ~PCIE_CAP_LCREG_ASPML0s;
- sb_pcielcreg((void *)(uintptr) sbh, 1, reg_val);
- } else
- SB_ERROR(("PCIEL1PLLDOWN: L0s is already disabled\n"));
-
- /* turnoff intrs, change core, set original back, turn on intrs back on */
- origidx = si->curidx;
- INTR_OFF(si, intr_val);
- sb_setcore(sbh, SB_PCIE, 0);
-
- sb_pcie_writereg((void *)(uintptr) sbh, (void *)PCIE_PCIEREGS,
- PCIE_DLLP_PCIE11, 0);
-
- sb_setcoreidx(sbh, origidx);
- INTR_RESTORE(si, intr_val);
- return 1;
-}
-#endif /* BCMDBG */
-
-/* return TRUE if PCIE capability exists in the pci config space */
-static bool sb_ispcie(sb_info_t * si)
-{
- uint8 cap_ptr;
-
- cap_ptr = sb_find_pci_capability(si, PCI_CAP_PCIECAP_ID, NULL, NULL);
- if (!cap_ptr)
- return FALSE;
-
- si->pciecap_lcreg_offset = cap_ptr + PCIE_CAP_LINKCTRL_OFFSET;
-
- return TRUE;
-}
-
-/* Wake-on-wireless-LAN (WOWL) support functions */
-/* return TRUE if PM capability exists in the pci config space */
-bool sb_pci_pmecap(sb_t * sbh)
-{
- uint8 cap_ptr;
- uint32 pmecap;
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- if (si == NULL || !(PCI(si) || PCIE(si)))
- return FALSE;
-
- if (!si->pmecap_offset) {
- cap_ptr =
- sb_find_pci_capability(si, PCI_CAP_POWERMGMTCAP_ID, NULL,
- NULL);
- if (!cap_ptr)
- return FALSE;
-
- si->pmecap_offset = cap_ptr;
-
- pmecap =
- OSL_PCI_READ_CONFIG(si->osh, si->pmecap_offset,
- sizeof(uint32));
-
- /* At least one state can generate PME */
- si->pmecap = (pmecap & PME_CAP_PM_STATES) != 0;
- }
-
- return (si->pmecap);
-}
-
-/* Enable PME generation and disable clkreq */
-void sb_pci_pmeen(sb_t * sbh)
-{
- sb_info_t *si;
- uint32 w;
- si = SB_INFO(sbh);
-
- /* if not pmecapable return */
- if (!sb_pci_pmecap(sbh))
- return;
-
- w = OSL_PCI_READ_CONFIG(si->osh, si->pmecap_offset + PME_CSR_OFFSET,
- sizeof(uint32));
- w |= (PME_CSR_PME_EN);
- OSL_PCI_WRITE_CONFIG(si->osh, si->pmecap_offset + PME_CSR_OFFSET,
- sizeof(uint32), w);
-
- /* Disable clkreq */
- if (si->pr42767_war) {
- sb_pcieclkreq(sbh, 1, 0);
- si->pr42767_war = FALSE;
- } else if (si->sb.pr42780) {
- sb_pcieclkreq(sbh, 1, 1);
- }
-}
-
-/* Disable PME generation, clear the PME status bit if set and
- * return TRUE if PME status set
- */
-bool sb_pci_pmeclr(sb_t * sbh)
-{
- sb_info_t *si;
- uint32 w;
- bool ret = FALSE;
-
- si = SB_INFO(sbh);
-
- if (!sb_pci_pmecap(sbh))
- return ret;
-
- w = OSL_PCI_READ_CONFIG(si->osh, si->pmecap_offset + PME_CSR_OFFSET,
- sizeof(uint32));
-
- SB_ERROR(("sb_pci_pmeclr PMECSR : 0x%x\n", w));
- ret = (w & PME_CSR_PME_STAT) == PME_CSR_PME_STAT;
-
- /* PMESTAT is cleared by writing 1 to it */
- w &= ~(PME_CSR_PME_EN);
-
- OSL_PCI_WRITE_CONFIG(si->osh, si->pmecap_offset + PME_CSR_OFFSET,
- sizeof(uint32), w);
-
- return ret;
-}
-
-/* use pci dev id to determine chip id for chips not having a chipcommon core */
-static uint BCMINITFN(sb_pcidev2chip) (uint pcidev) {
- if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
- return (BCM4710_CHIP_ID);
- if ((pcidev >= BCM4402_ENET_ID) && (pcidev <= BCM4402_V90_ID))
- return (BCM4402_CHIP_ID);
- if (pcidev == BCM4401_ENET_ID)
- return (BCM4402_CHIP_ID);
- if (pcidev == SDIOH_FPGA_ID)
- return (SDIOH_FPGA_ID);
-
- return (0);
-}
-
-/* Scan the enumeration space to find all cores starting from the given
- * bus 'sbba'. Append coreid and other info to the lists in 'si'. 'sba'
- * is the default core address at chip POR time and 'regs' is the virtual
- * address that the default core is mapped at. 'ncores' is the number of
- * cores expected on bus 'sbba'. It returns the total number of cores
- * starting from bus 'sbba', inclusive.
- */
-
-static void BCMINITFN(sb_scan) (sb_info_t * si) {
- sb_t *sbh;
- uint origidx;
- uint i;
- bool pci;
- bool pcie;
- uint pciidx;
- uint pcieidx;
- uint pcirev;
- uint pcierev;
-
- sbh = (sb_t *) si;
-
- /* numcores should already be set */
- ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
-
- /* save current core index */
- origidx = sb_coreidx(&si->sb);
-
- si->sb.buscorerev = NOREV;
- si->sb.buscoreidx = BADIDX;
-
- si->gpioidx = BADIDX;
-
- pci = pcie = FALSE;
- pcirev = pcierev = NOREV;
- pciidx = pcieidx = BADIDX;
-
- for (i = 0; i < si->numcores; i++) {
- sb_setcoreidx(&si->sb, i);
- si->coreid[i] = sb_coreid(&si->sb);
-
- if (si->coreid[i] == SB_PCI) {
- pciidx = i;
- pcirev = sb_corerev(&si->sb);
- pci = TRUE;
- } else if (si->coreid[i] == SB_PCIE) {
- pcieidx = i;
- pcierev = sb_corerev(&si->sb);
- pcie = TRUE;
- } else if (si->coreid[i] == SB_PCMCIA) {
- si->sb.buscorerev = sb_corerev(&si->sb);
- si->sb.buscoretype = si->coreid[i];
- si->sb.buscoreidx = i;
- }
- }
- if (pci && pcie) {
- if (sb_ispcie(si))
- pci = FALSE;
- else
- pcie = FALSE;
- }
- if (pci) {
- si->sb.buscoretype = SB_PCI;
- si->sb.buscorerev = pcirev;
- si->sb.buscoreidx = pciidx;
- } else if (pcie) {
- si->sb.buscoretype = SB_PCIE;
- si->sb.buscorerev = pcierev;
- si->sb.buscoreidx = pcieidx;
- }
-
- /*
- * Find the gpio "controlling core" type and index.
- * Precedence:
- * - if there's a chip common core - use that
- * - else if there's a pci core (rev >= 2) - use that
- * - else there had better be an extif core (4710 only)
- */
- if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) {
- si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0);
- si->gpioid = SB_CC;
- } else if (PCI(si) && (si->sb.buscorerev >= 2)) {
- si->gpioidx = si->sb.buscoreidx;
- si->gpioid = SB_PCI;
- } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) {
- si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0);
- si->gpioid = SB_EXTIF;
- } else
- ASSERT(si->gpioidx != BADIDX);
-
- /* return to original core index */
- sb_setcoreidx(&si->sb, origidx);
-}
-
-/* may be called with core in reset */
-void sb_detach(sb_t * sbh)
-{
- sb_info_t *si;
- uint idx;
-
- si = SB_INFO(sbh);
-
- if (si == NULL)
- return;
-
- if (BUSTYPE(si->sb.bustype) == SB_BUS)
- for (idx = 0; idx < SB_MAXCORES; idx++)
- if (si->regs[idx]) {
- REG_UNMAP(si->regs[idx]);
- si->regs[idx] = NULL;
- }
-#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SB_BUS)
- if (si != &ksi)
-#endif /* !BCMBUSTYPE || (BCMBUSTYPE == SB_BUS) */
- MFREE(si->osh, si, sizeof(sb_info_t));
-}
-
-
-/* convert chip number to number of i/o cores */
-static uint BCMINITFN(sb_chip2numcores) (uint chip) {
- if (chip == BCM4710_CHIP_ID)
- return (9);
- if (chip == BCM4402_CHIP_ID)
- return (3);
- if (chip == BCM4306_CHIP_ID) /* < 4306c0 */
- return (6);
- if (chip == BCM4704_CHIP_ID)
- return (9);
- if (chip == BCM5365_CHIP_ID)
- return (7);
- if (chip == SDIOH_FPGA_ID)
- return (2);
-
- SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
- ASSERT(0);
- return (1);
-}
-
-/* return index of coreid or BADIDX if not found */
-uint sb_findcoreidx(sb_t * sbh, uint coreid, uint coreunit)
-{
- sb_info_t *si;
- uint found;
- uint i;
-
- si = SB_INFO(sbh);
-
- found = 0;
-
- for (i = 0; i < si->numcores; i++)
- if (si->coreid[i] == coreid) {
- if (found == coreunit)
- return (i);
- found++;
- }
-
- return (BADIDX);
-}
-
-/*
- * this function changes logical "focus" to the indiciated core,
- * must be called with interrupt off.
- * Moreover, callers should keep interrupts off during switching out of and back to d11 core
- */
-void *sb_setcoreidx(sb_t * sbh, uint coreidx)
-{
- sb_info_t *si;
- uint32 sbaddr;
- uint8 tmp;
-
- si = SB_INFO(sbh);
-
- if (coreidx >= si->numcores)
- return (NULL);
-
- /*
- * If the user has provided an interrupt mask enabled function,
- * then assert interrupts are disabled before switching the core.
- */
- ASSERT((si->intrsenabled_fn == NULL)
- || !(*(si)->intrsenabled_fn) ((si)->intr_arg));
-
- sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
-
- switch (BUSTYPE(si->sb.bustype)) {
- case SB_BUS:
- /* map new one */
- if (!si->regs[coreidx]) {
- si->regs[coreidx] =
- (void *)REG_MAP(sbaddr, SB_CORE_SIZE);
- ASSERT(GOODREGS(si->regs[coreidx]));
- }
- si->curmap = si->regs[coreidx];
- break;
-
- case PCI_BUS:
- /* point bar0 window */
- OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
- break;
-
- case PCMCIA_BUS:
- tmp = (sbaddr >> 12) & 0x0f;
- OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
- tmp = (sbaddr >> 16) & 0xff;
- OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
- tmp = (sbaddr >> 24) & 0xff;
- OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
- break;
-#ifdef BCMJTAG
- case JTAG_BUS:
- /* map new one */
- if (!si->regs[coreidx]) {
- si->regs[coreidx] = (void *)sbaddr;
- ASSERT(GOODREGS(si->regs[coreidx]));
- }
- si->curmap = si->regs[coreidx];
- break;
-#endif /* BCMJTAG */
- }
-
- si->curidx = coreidx;
-
- return (si->curmap);
-}
-
-/*
- * this function changes logical "focus" to the indiciated core,
- * must be called with interrupt off.
- * Moreover, callers should keep interrupts off during switching out of and back to d11 core
- */
-void *sb_setcore(sb_t * sbh, uint coreid, uint coreunit)
-{
- uint idx;
-
- idx = sb_findcoreidx(sbh, coreid, coreunit);
- if (!GOODIDX(idx))
- return (NULL);
-
- return (sb_setcoreidx(sbh, idx));
-}
-
-/* return chip number */
-uint BCMINITFN(sb_chip) (sb_t * sbh) {
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return (si->sb.chip);
-}
-
-/* return chip revision number */
-uint BCMINITFN(sb_chiprev) (sb_t * sbh) {
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return (si->sb.chiprev);
-}
-
-/* return chip common revision number */
-uint BCMINITFN(sb_chipcrev) (sb_t * sbh) {
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return (si->sb.ccrev);
-}
-
-/* return chip package option */
-uint BCMINITFN(sb_chippkg) (sb_t * sbh) {
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return (si->sb.chippkg);
-}
-
-/* return PCI core rev. */
-uint BCMINITFN(sb_pcirev) (sb_t * sbh) {
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return (si->sb.buscorerev);
-}
-
-bool BCMINITFN(sb_war16165) (sb_t * sbh) {
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- return (PCI(si) && (si->sb.buscorerev <= 10));
-}
-
-static void BCMINITFN(sb_war30841) (sb_info_t * si) {
- sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128);
- sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100);
- sb_pcie_mdiowrite(si, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466);
-}
-
-/* return PCMCIA core rev. */
-uint BCMINITFN(sb_pcmciarev) (sb_t * sbh) {
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return (si->sb.buscorerev);
-}
-
-/* return board vendor id */
-uint BCMINITFN(sb_boardvendor) (sb_t * sbh) {
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return (si->sb.boardvendor);
-}
-
-/* return boardtype */
-uint BCMINITFN(sb_boardtype) (sb_t * sbh) {
- sb_info_t *si;
- char *var;
-
- si = SB_INFO(sbh);
-
- if (BUSTYPE(si->sb.bustype) == SB_BUS && si->sb.boardtype == 0xffff) {
- /* boardtype format is a hex string */
- si->sb.boardtype = getintvar(NULL, "boardtype");
-
- /* backward compatibility for older boardtype string format */
- if ((si->sb.boardtype == 0)
- && (var = getvar(NULL, "boardtype"))) {
- if (!strcmp(var, "bcm94710dev"))
- si->sb.boardtype = BCM94710D_BOARD;
- else if (!strcmp(var, "bcm94710ap"))
- si->sb.boardtype = BCM94710AP_BOARD;
- else if (!strcmp(var, "bu4710"))
- si->sb.boardtype = BU4710_BOARD;
- else if (!strcmp(var, "bcm94702mn"))
- si->sb.boardtype = BCM94702MN_BOARD;
- else if (!strcmp(var, "bcm94710r1"))
- si->sb.boardtype = BCM94710R1_BOARD;
- else if (!strcmp(var, "bcm94710r4"))
- si->sb.boardtype = BCM94710R4_BOARD;
- else if (!strcmp(var, "bcm94702cpci"))
- si->sb.boardtype = BCM94702CPCI_BOARD;
- else if (!strcmp(var, "bcm95380_rr"))
- si->sb.boardtype = BCM95380RR_BOARD;
- }
- }
-
- return (si->sb.boardtype);
-}
-
-/* return bus type of sbh device */
-uint sb_bus(sb_t * sbh)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return (si->sb.bustype);
-}
-
-/* return bus core type */
-uint sb_buscoretype(sb_t * sbh)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- return (si->sb.buscoretype);
-}
-
-/* return bus core revision */
-uint sb_buscorerev(sb_t * sbh)
-{
- sb_info_t *si;
- si = SB_INFO(sbh);
-
- return (si->sb.buscorerev);
-}
-
-/* return list of found cores */
-uint sb_corelist(sb_t * sbh, uint coreid[])
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- bcopy((uchar *) si->coreid, (uchar *) coreid,
- (si->numcores * sizeof(uint)));
- return (si->numcores);
-}
-
-/* return current register mapping */
-void *sb_coreregs(sb_t * sbh)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- ASSERT(GOODREGS(si->curmap));
-
- return (si->curmap);
-}
-
-#if defined(BCMDBG_ASSERT)
-/* traverse all cores to find and clear source of serror */
-static void sb_serr_clear(sb_info_t * si)
-{
- sbconfig_t *sb;
- uint origidx;
- uint i, intr_val = 0;
- void *corereg = NULL;
-
- INTR_OFF(si, intr_val);
- origidx = sb_coreidx(&si->sb);
-
- for (i = 0; i < si->numcores; i++) {
- corereg = sb_setcoreidx(&si->sb, i);
- if (NULL != corereg) {
- sb = REGS2SB(corereg);
- if ((R_SBREG(si, &sb->sbtmstatehigh)) & SBTMH_SERR) {
- AND_SBREG(si, &sb->sbtmstatehigh, ~SBTMH_SERR);
- SB_ERROR(("sb_serr_clear: SError at core 0x%x\n", sb_coreid(&si->sb)));
- }
- }
- }
-
- sb_setcoreidx(&si->sb, origidx);
- INTR_RESTORE(si, intr_val);
-}
-
-/*
- * Check if any inband, outband or timeout errors has happened and clear them.
- * Must be called with chip clk on !
- */
-bool sb_taclear(sb_t * sbh)
-{
- sb_info_t *si;
- sbconfig_t *sb;
- uint origidx;
- uint intr_val = 0;
- bool rc = FALSE;
- uint32 inband = 0, serror = 0, timeout = 0;
- void *corereg = NULL;
- volatile uint32 imstate, tmstate;
-
- si = SB_INFO(sbh);
-
- if (BUSTYPE(si->sb.bustype) == PCI_BUS) {
- volatile uint32 stcmd;
-
- /* inband error is Target abort for PCI */
- stcmd =
- OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(uint32));
- inband = stcmd & PCI_CFG_CMD_STAT_TA;
- if (inband) {
-#ifdef BCMDBG
- SB_ERROR(("inband:\n"));
- sb_viewall((void *)si);
-#endif
- OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD,
- sizeof(uint32), stcmd);
- }
-
- /* serror */
- stcmd =
- OSL_PCI_READ_CONFIG(si->osh, PCI_INT_STATUS,
- sizeof(uint32));
- serror = stcmd & PCI_SBIM_STATUS_SERR;
- if (serror) {
-#ifdef BCMDBG
- SB_ERROR(("serror:\n"));
- sb_viewall((void *)si);
-#endif
- sb_serr_clear(si);
- OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_STATUS,
- sizeof(uint32), stcmd);
- }
-
- /* timeout */
- imstate = sb_corereg(sbh, si->sb.buscoreidx,
- SBCONFIGOFF + OFFSETOF(sbconfig_t,
- sbimstate), 0, 0);
- if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) {
- sb_corereg(sbh, si->sb.buscoreidx,
- SBCONFIGOFF + OFFSETOF(sbconfig_t,
- sbimstate), ~0,
- (imstate & ~(SBIM_IBE | SBIM_TO)));
- /* inband = imstate & SBIM_IBE; same as TA above */
- timeout = imstate & SBIM_TO;
- if (timeout) {
-#ifdef BCMDBG
- SB_ERROR(("timeout:\n"));
- sb_viewall((void *)si);
-#endif
- }
- }
-
- if (inband) {
- /* dump errlog for sonics >= 2.3 */
- if (si->sb.sonicsrev == SONICS_2_2) ;
- else {
- uint32 imerrlog, imerrloga;
- imerrlog =
- sb_corereg(sbh, si->sb.buscoreidx,
- SBIMERRLOG, 0, 0);
- if (imerrlog & SBTMEL_EC) {
- imerrloga =
- sb_corereg(sbh, si->sb.buscoreidx,
- SBIMERRLOGA, 0, 0);
- /* clear errlog */
- sb_corereg(sbh, si->sb.buscoreidx,
- SBIMERRLOG, ~0, 0);
- SB_ERROR(("sb_taclear: ImErrLog 0x%x, ImErrLogA 0x%x\n", imerrlog, imerrloga));
- }
- }
- }
-
- } else if (BUSTYPE(si->sb.bustype) == PCMCIA_BUS) {
-
- INTR_OFF(si, intr_val);
- origidx = sb_coreidx(sbh);
-
- corereg = sb_setcore(sbh, SB_PCMCIA, 0);
- if (NULL != corereg) {
- sb = REGS2SB(corereg);
-
- imstate = R_SBREG(si, &sb->sbimstate);
- /* handle surprise removal */
- if ((imstate != 0xffffffff)
- && (imstate & (SBIM_IBE | SBIM_TO))) {
- AND_SBREG(si, &sb->sbimstate,
- ~(SBIM_IBE | SBIM_TO));
- inband = imstate & SBIM_IBE;
- timeout = imstate & SBIM_TO;
- }
- tmstate = R_SBREG(si, &sb->sbtmstatehigh);
- if ((tmstate != 0xffffffff)
- && (tmstate & SBTMH_INT_STATUS)) {
- if (!inband) {
- serror = 1;
- sb_serr_clear(si);
- }
- OR_SBREG(si, &sb->sbtmstatelow, SBTML_INT_ACK);
- AND_SBREG(si, &sb->sbtmstatelow,
- ~SBTML_INT_ACK);
- }
- }
- sb_setcoreidx(sbh, origidx);
- INTR_RESTORE(si, intr_val);
-
- }
-
- if (inband | timeout | serror) {
- rc = TRUE;
- SB_ERROR(("sb_taclear: inband 0x%x, serror 0x%x, timeout 0x%x!\n", inband, serror, timeout));
- }
-
- return (rc);
-}
-#endif /* BCMDBG */
-
-/* do buffered registers update */
-void sb_commit(sb_t * sbh)
-{
- sb_info_t *si;
- uint origidx;
- uint intr_val = 0;
-
- si = SB_INFO(sbh);
-
- origidx = si->curidx;
- ASSERT(GOODIDX(origidx));
-
- INTR_OFF(si, intr_val);
-
- /* switch over to chipcommon core if there is one, else use pci */
- if (si->sb.ccrev != NOREV) {
- chipcregs_t *ccregs = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0);
-
- /* do the buffer registers update */
- W_REG(si->osh, &ccregs->broadcastaddress, SB_COMMIT);
- W_REG(si->osh, &ccregs->broadcastdata, 0x0);
- } else if (PCI(si)) {
- sbpciregs_t *pciregs =
- (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
-
- /* do the buffer registers update */
- W_REG(si->osh, &pciregs->bcastaddr, SB_COMMIT);
- W_REG(si->osh, &pciregs->bcastdata, 0x0);
- } else
- ASSERT(0);
-
- /* restore core index */
- sb_setcoreidx(sbh, origidx);
- INTR_RESTORE(si, intr_val);
-}
-
-/* reset and re-enable a core
- * inputs:
- * bits - core specific bits that are set during and after reset sequence
- * resetbits - core specific bits that are set only during reset sequence
- */
-void sb_core_reset(sb_t * sbh, uint32 bits, uint32 resetbits)
-{
- sb_info_t *si;
- sbconfig_t *sb;
- volatile uint32 dummy;
-
- si = SB_INFO(sbh);
- ASSERT(GOODREGS(si->curmap));
- sb = REGS2SB(si->curmap);
-
- /*
- * Must do the disable sequence first to work for arbitrary current core state.
- */
- sb_core_disable(sbh, (bits | resetbits));
-
- /*
- * Now do the initialization sequence.
- */
-
- /* set reset while enabling the clock and forcing them on throughout the core */
- W_SBREG(si, &sb->sbtmstatelow,
- (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits | resetbits));
- dummy = R_SBREG(si, &sb->sbtmstatelow);
- OSL_DELAY(1);
-
- if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_SERR) {
- W_SBREG(si, &sb->sbtmstatehigh, 0);
- }
- if ((dummy = R_SBREG(si, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
- AND_SBREG(si, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
- }
-
- /* clear reset and allow it to propagate throughout the core */
- W_SBREG(si, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
- dummy = R_SBREG(si, &sb->sbtmstatelow);
- OSL_DELAY(1);
-
- /* leave clock enabled */
- W_SBREG(si, &sb->sbtmstatelow, (SBTML_CLK | bits));
- dummy = R_SBREG(si, &sb->sbtmstatelow);
- OSL_DELAY(1);
-}
-
-void sb_core_tofixup(sb_t * sbh)
-{
- sb_info_t *si;
- sbconfig_t *sb;
-
- si = SB_INFO(sbh);
-
- if ((BUSTYPE(si->sb.bustype) != PCI_BUS) || PCIE(si) ||
- (PCI(si) && (si->sb.buscorerev >= 5)))
- return;
-
- ASSERT(GOODREGS(si->curmap));
- sb = REGS2SB(si->curmap);
-
- if (BUSTYPE(si->sb.bustype) == SB_BUS) {
- SET_SBREG(si, &sb->sbimconfiglow,
- SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
- (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
- } else {
- if (sb_coreid(sbh) == SB_PCI) {
- SET_SBREG(si, &sb->sbimconfiglow,
- SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
- (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
- } else {
- SET_SBREG(si, &sb->sbimconfiglow,
- (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
- }
- }
-
- sb_commit(sbh);
-}
-
-/*
- * Set the initiator timeout for the "master core".
- * The master core is defined to be the core in control
- * of the chip and so it issues accesses to non-memory
- * locations (Because of dma *any* core can access memeory).
- *
- * The routine uses the bus to decide who is the master:
- * SB_BUS => mips
- * JTAG_BUS => chipc
- * PCI_BUS => pci or pcie
- * PCMCIA_BUS => pcmcia
- * SDIO_BUS => pcmcia
- *
- * This routine exists so callers can disable initiator
- * timeouts so accesses to very slow devices like otp
- * won't cause an abort. The routine allows arbitrary
- * settings of the service and request timeouts, though.
- *
- * Returns the timeout state before changing it or -1
- * on error.
- */
-
-#define TO_MASK (SBIMCL_RTO_MASK | SBIMCL_STO_MASK)
-
-uint32 sb_set_initiator_to(sb_t * sbh, uint32 to, uint idx)
-{
- sb_info_t *si;
- uint origidx;
- uint intr_val = 0;
- uint32 tmp, ret = 0xffffffff;
- sbconfig_t *sb;
-
- si = SB_INFO(sbh);
-
- if ((to & ~TO_MASK) != 0)
- return ret;
-
- /* Figure out the master core */
- if (idx == BADIDX) {
- switch (BUSTYPE(si->sb.bustype)) {
- case PCI_BUS:
- idx = si->sb.buscoreidx;
- break;
- case JTAG_BUS:
- idx = SB_CC_IDX;
- break;
- case PCMCIA_BUS:
- case SDIO_BUS:
- idx = sb_findcoreidx(sbh, SB_PCMCIA, 0);
- break;
- case SB_BUS:
- if ((idx = sb_findcoreidx(sbh, SB_MIPS33, 0)) == BADIDX)
- idx = sb_findcoreidx(sbh, SB_MIPS, 0);
- break;
- default:
- ASSERT(0);
- }
- if (idx == BADIDX)
- return ret;
- }
-
- INTR_OFF(si, intr_val);
- origidx = sb_coreidx(sbh);
-
- sb = REGS2SB(sb_setcoreidx(sbh, idx));
-
- tmp = R_SBREG(si, &sb->sbimconfiglow);
- ret = tmp & TO_MASK;
- W_SBREG(si, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to);
-
- sb_commit(sbh);
- sb_setcoreidx(sbh, origidx);
- INTR_RESTORE(si, intr_val);
- return ret;
-}
-
-void sb_core_disable(sb_t * sbh, uint32 bits)
-{
- sb_info_t *si;
- volatile uint32 dummy;
- uint32 rej;
- sbconfig_t *sb;
-
- si = SB_INFO(sbh);
-
- ASSERT(GOODREGS(si->curmap));
- sb = REGS2SB(si->curmap);
-
- /* if core is already in reset, just return */
- if (R_SBREG(si, &sb->sbtmstatelow) & SBTML_RESET)
- return;
-
- /* reject value changed between sonics 2.2 and 2.3 */
- if (si->sb.sonicsrev == SONICS_2_2)
- rej = (1 << SBTML_REJ_SHIFT);
- else
- rej = (2 << SBTML_REJ_SHIFT);
-
- /* if clocks are not enabled, put into reset and return */
- if ((R_SBREG(si, &sb->sbtmstatelow) & SBTML_CLK) == 0)
- goto disable;
-
- /* set target reject and spin until busy is clear (preserve core-specific bits) */
- OR_SBREG(si, &sb->sbtmstatelow, rej);
- dummy = R_SBREG(si, &sb->sbtmstatelow);
- OSL_DELAY(1);
- SPINWAIT((R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000);
- if (R_SBREG(si, &sb->sbtmstatehigh) & SBTMH_BUSY)
- SB_ERROR(("%s: target state still busy\n", __FUNCTION__));
-
- if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT) {
- OR_SBREG(si, &sb->sbimstate, SBIM_RJ);
- dummy = R_SBREG(si, &sb->sbimstate);
- OSL_DELAY(1);
- SPINWAIT((R_SBREG(si, &sb->sbimstate) & SBIM_BY), 100000);
- }
-
- /* set reset and reject while enabling the clocks */
- W_SBREG(si, &sb->sbtmstatelow,
- (bits | SBTML_FGC | SBTML_CLK | rej | SBTML_RESET));
- dummy = R_SBREG(si, &sb->sbtmstatelow);
- OSL_DELAY(10);
-
- /* don't forget to clear the initiator reject bit */
- if (R_SBREG(si, &sb->sbidlow) & SBIDL_INIT)
- AND_SBREG(si, &sb->sbimstate, ~SBIM_RJ);
-
- disable:
- /* leave reset and reject asserted */
- W_SBREG(si, &sb->sbtmstatelow, (bits | rej | SBTML_RESET));
- OSL_DELAY(1);
-}
-
-/* set chip watchdog reset timer to fire in 'ticks' backplane cycles */
-void sb_watchdog(sb_t * sbh, uint ticks)
-{
- sb_info_t *si = SB_INFO(sbh);
-
- /* make sure we come up in fast clock mode; or if clearing, clear clock */
- if (ticks)
- sb_clkctl_clk(sbh, CLK_FAST);
- else
- sb_clkctl_clk(sbh, CLK_DYNAMIC);
-
- if (sbh->chip == BCM4328_CHIP_ID && ticks != 0)
- sb_corereg(sbh, SB_CC_IDX, OFFSETOF(chipcregs_t, min_res_mask),
- PMURES_BIT(RES4328_ROM_SWITCH),
- PMURES_BIT(RES4328_ROM_SWITCH));
-
- /* instant NMI */
- switch (si->gpioid) {
- case SB_CC:
- sb_corereg(sbh, SB_CC_IDX, OFFSETOF(chipcregs_t, watchdog), ~0,
- ticks);
- break;
- case SB_EXTIF:
- sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog),
- ~0, ticks);
- break;
- }
-}
-
-/* initialize the pcmcia core */
-void sb_pcmcia_init(sb_t * sbh)
-{
- sb_info_t *si;
- uint8 cor = 0;
-
- si = SB_INFO(sbh);
-
- /* enable d11 mac interrupts */
- OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
- cor |= COR_IRQEN | COR_FUNEN;
- OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
-
-}
-
-void BCMINITFN(sb_pci_up) (sb_t * sbh) {
- sb_info_t *si = SB_INFO(sbh);
- if (si->gpioid == SB_EXTIF)
- return;
-
- /* if not pci bus, we're done */
- if (BUSTYPE(si->sb.bustype) != PCI_BUS)
- return;
-
- if (FORCEHT_WAR32414(si))
- sb_war32414_forceHT(sbh, 1);
-
- if (PCIE_ASPMWARS(si) || si->sb.pr42780)
- sb_pcieclkreq(sbh, 1, 0);
-
- if (PCIE(si) &&
- (((si->sb.chip == BCM4311_CHIP_ID) && (si->sb.chiprev == 2)) ||
- ((si->sb.chip == BCM4312_CHIP_ID) && (si->sb.chiprev == 0))))
- sb_set_initiator_to((void *)si, 0x3,
- sb_findcoreidx((void *)si, SB_D11, 0));
-}
-
-/* Unconfigure and/or apply various WARs when system is going to sleep mode */
-void BCMUNINITFN(sb_pci_sleep) (sb_t * sbh) {
- sb_info_t *si = SB_INFO(sbh);
- if (si->gpioid == SB_EXTIF)
- return;
- uint32 w;
-
- /* if not pci bus, we're done */
- if (!PCIE(si) || !PCIE_ASPMWARS(si))
- return;
-
- w = OSL_PCI_READ_CONFIG(si->osh, si->pciecap_lcreg_offset,
- sizeof(uint32));
- w &= ~PCIE_CAP_LCREG_ASPML1;
- OSL_PCI_WRITE_CONFIG(si->osh, si->pciecap_lcreg_offset, sizeof(uint32),
- w);
-}
-
-/* Unconfigure and/or apply various WARs when going down */
-void BCMINITFN(sb_pci_down) (sb_t * sbh) {
- sb_info_t *si = SB_INFO(sbh);
- if (si->gpioid == SB_EXTIF)
- return;
-
- /* if not pci bus, we're done */
- if (BUSTYPE(si->sb.bustype) != PCI_BUS)
- return;
-
- if (FORCEHT_WAR32414(si))
- sb_war32414_forceHT(sbh, 0);
-
- if (si->pr42767_war) {
- sb_pcieclkreq(sbh, 1, 1);
- si->pr42767_war = FALSE;
- } else if (si->sb.pr42780) {
- sb_pcieclkreq(sbh, 1, 1);
- }
-}
-
-static void BCMINITFN(sb_war42767_clkreq) (sb_t * sbh) {
- sbpcieregs_t *pcieregs;
- uint16 val16, *reg16;
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- /* if not pcie bus, we're done */
- if (!PCIE(si) || !PCIE_ASPMWARS(si))
- return;
-
- pcieregs = (sbpcieregs_t *) sb_setcoreidx(sbh, si->sb.buscoreidx);
- reg16 = &pcieregs->sprom[SRSH_CLKREQ_OFFSET];
- val16 = R_REG(si->osh, reg16);
- /* if clockreq is not advertized advertize it */
- if (!si->pcie_war_ovr) {
- val16 |= SRSH_CLKREQ_ENB;
- si->pr42767_war = TRUE;
-
- si->sb.pr42780 = TRUE;
- } else
- val16 &= ~SRSH_CLKREQ_ENB;
- W_REG(si->osh, reg16, val16);
-}
-
-static void BCMINITFN(sb_war42767) (sb_t * sbh) {
- uint32 w = 0;
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- /* if not pcie bus, we're done */
- if (!PCIE(si) || !PCIE_ASPMWARS(si))
- return;
-
- sb_pcie_mdioread(si, MDIODATA_DEV_PLL, SERDES_PLL_CTRL, &w);
- if (w & PLL_CTRL_FREQDET_EN) {
- w &= ~PLL_CTRL_FREQDET_EN;
- sb_pcie_mdiowrite(si, MDIODATA_DEV_PLL, SERDES_PLL_CTRL, w);
- }
-}
-
-/*
- * Configure the pci core for pci client (NIC) action
- * coremask is the bitvec of cores by index to be enabled.
- */
-void BCMINITFN(sb_pci_setup) (sb_t * sbh, uint coremask) {
- sb_info_t *si;
- sbconfig_t *sb;
- sbpciregs_t *pciregs;
- uint32 sbflag;
- uint32 w;
- uint idx;
-
- si = SB_INFO(sbh);
-
- /* if not pci bus, we're done */
- if (BUSTYPE(si->sb.bustype) != PCI_BUS)
- return;
-
- ASSERT(PCI(si) || PCIE(si));
- ASSERT(si->sb.buscoreidx != BADIDX);
-
- /* get current core index */
- idx = si->curidx;
-
- /* we interrupt on this backplane flag number */
- ASSERT(GOODREGS(si->curmap));
- sb = REGS2SB(si->curmap);
- sbflag = R_SBREG(si, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
-
- /* switch over to pci core */
- pciregs = (sbpciregs_t *) sb_setcoreidx(sbh, si->sb.buscoreidx);
- sb = REGS2SB(pciregs);
-
- /*
- * Enable sb->pci interrupts. Assume
- * PCI rev 2.3 support was added in pci core rev 6 and things changed..
- */
- if (PCIE(si) || (PCI(si) && ((si->sb.buscorerev) >= 6))) {
- /* pci config write to set this core bit in PCIIntMask */
- w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
- w |= (coremask << PCI_SBIM_SHIFT);
- OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
- } else {
- /* set sbintvec bit for our flag number */
- OR_SBREG(si, &sb->sbintvec, (1 << sbflag));
- }
-
- if (PCI(si)) {
- OR_REG(si->osh, &pciregs->sbtopci2,
- (SBTOPCI_PREF | SBTOPCI_BURST));
- if (si->sb.buscorerev >= 11)
- OR_REG(si->osh, &pciregs->sbtopci2,
- SBTOPCI_RC_READMULTI);
- if (si->sb.buscorerev < 5) {
- SET_SBREG(si, &sb->sbimconfiglow,
- SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
- (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
- sb_commit(sbh);
- }
- }
-
- /* PCIE workarounds */
- if (PCIE(si)) {
- if ((si->sb.buscorerev == 0) || (si->sb.buscorerev == 1)) {
- w = sb_pcie_readreg((void *)(uintptr) sbh,
- (void *)(uintptr) PCIE_PCIEREGS,
- PCIE_TLP_WORKAROUNDSREG);
- w |= 0x8;
- sb_pcie_writereg((void *)(uintptr) sbh,
- (void *)(uintptr) PCIE_PCIEREGS,
- PCIE_TLP_WORKAROUNDSREG, w);
- }
-
- if (si->sb.buscorerev == 1) {
- w = sb_pcie_readreg((void *)(uintptr) sbh,
- (void *)(uintptr) PCIE_PCIEREGS,
- PCIE_DLLP_LCREG);
- w |= (0x40);
- sb_pcie_writereg((void *)(uintptr) sbh,
- (void *)(uintptr) PCIE_PCIEREGS,
- PCIE_DLLP_LCREG, w);
- }
-
- if (si->sb.buscorerev == 0)
- sb_war30841(si);
-
- if ((si->sb.buscorerev >= 3) && (si->sb.buscorerev <= 5)) {
- w = sb_pcie_readreg((void *)(uintptr) sbh,
- (void *)(uintptr) PCIE_PCIEREGS,
- PCIE_DLLP_PMTHRESHREG);
- w &= ~(PCIE_L1THRESHOLDTIME_MASK);
- w |= (PCIE_L1THRESHOLD_WARVAL <<
- PCIE_L1THRESHOLDTIME_SHIFT);
- sb_pcie_writereg((void *)(uintptr) sbh,
- (void *)(uintptr) PCIE_PCIEREGS,
- PCIE_DLLP_PMTHRESHREG, w);
-
- sb_war43448(sbh);
-
- sb_war42767(sbh);
-
- sb_war43448_aspm(sbh);
- sb_war42767_clkreq(sbh);
- }
- }
-
- /* switch back to previous core */
- sb_setcoreidx(sbh, idx);
-}
-
-uint32 sb_base(uint32 admatch)
-{
- uint32 base;
- uint type;
-
- type = admatch & SBAM_TYPE_MASK;
- ASSERT(type < 3);
-
- base = 0;
-
- if (type == 0) {
- base = admatch & SBAM_BASE0_MASK;
- } else if (type == 1) {
- ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
- base = admatch & SBAM_BASE1_MASK;
- } else if (type == 2) {
- ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
- base = admatch & SBAM_BASE2_MASK;
- }
-
- return (base);
-}
-
-uint32 sb_size(uint32 admatch)
-{
- uint32 size;
- uint type;
-
- type = admatch & SBAM_TYPE_MASK;
- ASSERT(type < 3);
-
- size = 0;
-
- if (type == 0) {
- size =
- 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) +
- 1);
- } else if (type == 1) {
- ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
- size =
- 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) +
- 1);
- } else if (type == 2) {
- ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
- size =
- 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) +
- 1);
- }
-
- return (size);
-}
-
-/* return the core-type instantiation # of the current core */
-uint sb_coreunit(sb_t * sbh)
-{
- sb_info_t *si;
- uint idx;
- uint coreid;
- uint coreunit;
- uint i;
-
- si = SB_INFO(sbh);
- coreunit = 0;
-
- idx = si->curidx;
-
- ASSERT(GOODREGS(si->curmap));
- coreid = sb_coreid(sbh);
-
- /* count the cores of our type */
- for (i = 0; i < idx; i++)
- if (si->coreid[i] == coreid)
- coreunit++;
-
- return (coreunit);
-}
-
-static uint32 BCMINITFN(factor6) (uint32 x) {
- switch (x) {
- case CC_F6_2:
- return 2;
- case CC_F6_3:
- return 3;
- case CC_F6_4:
- return 4;
- case CC_F6_5:
- return 5;
- case CC_F6_6:
- return 6;
- case CC_F6_7:
- return 7;
- default:
- return 0;
- }
-}
-
-/* calculate the speed the SB would run at given a set of clockcontrol values */
-uint32 BCMINITFN(sb_clock_rate) (uint32 pll_type, uint32 n, uint32 m) {
- uint32 n1, n2, clock, m1, m2, m3, mc;
-
- n1 = n & CN_N1_MASK;
- n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
-
- if (pll_type == PLL_TYPE6) {
- if (m & CC_T6_MMASK)
- return CC_T6_M1;
- else
- return CC_T6_M0;
- } else if ((pll_type == PLL_TYPE1) ||
- (pll_type == PLL_TYPE3) ||
- (pll_type == PLL_TYPE4) || (pll_type == PLL_TYPE7)) {
- n1 = factor6(n1);
- n2 += CC_F5_BIAS;
- } else if (pll_type == PLL_TYPE2) {
- n1 += CC_T2_BIAS;
- n2 += CC_T2_BIAS;
- ASSERT((n1 >= 2) && (n1 <= 7));
- ASSERT((n2 >= 5) && (n2 <= 23));
- } else if (pll_type == PLL_TYPE5) {
- return (100000000);
- } else
- ASSERT(0);
- /* PLL types 3 and 7 use BASE2 (25Mhz) */
- if ((pll_type == PLL_TYPE3) || (pll_type == PLL_TYPE7)) {
- clock = CC_CLOCK_BASE2 * n1 * n2;
- } else
- clock = CC_CLOCK_BASE1 * n1 * n2;
-
- if (clock == 0)
- return 0;
-
- m1 = m & CC_M1_MASK;
- m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
- m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
- mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
-
- if ((pll_type == PLL_TYPE1) ||
- (pll_type == PLL_TYPE3) ||
- (pll_type == PLL_TYPE4) || (pll_type == PLL_TYPE7)) {
- m1 = factor6(m1);
- if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3))
- m2 += CC_F5_BIAS;
- else
- m2 = factor6(m2);
- m3 = factor6(m3);
-
- switch (mc) {
- case CC_MC_BYPASS:
- return (clock);
- case CC_MC_M1:
- return (clock / m1);
- case CC_MC_M1M2:
- return (clock / (m1 * m2));
- case CC_MC_M1M2M3:
- return (clock / (m1 * m2 * m3));
- case CC_MC_M1M3:
- return (clock / (m1 * m3));
- default:
- return (0);
- }
- } else {
- ASSERT(pll_type == PLL_TYPE2);
-
- m1 += CC_T2_BIAS;
- m2 += CC_T2M2_BIAS;
- m3 += CC_T2_BIAS;
- ASSERT((m1 >= 2) && (m1 <= 7));
- ASSERT((m2 >= 3) && (m2 <= 10));
- ASSERT((m3 >= 2) && (m3 <= 7));
-
- if ((mc & CC_T2MC_M1BYP) == 0)
- clock /= m1;
- if ((mc & CC_T2MC_M2BYP) == 0)
- clock /= m2;
- if ((mc & CC_T2MC_M3BYP) == 0)
- clock /= m3;
-
- return (clock);
- }
-}
-
-/* returns the current speed the SB is running at */
-uint32 BCMINITFN(sb_clock) (sb_t * sbh) {
- sb_info_t *si;
- extifregs_t *eir;
- chipcregs_t *cc;
- uint32 n, m;
- uint idx;
- uint32 cap, pll_type, rate;
- uint intr_val = 0;
-
- si = SB_INFO(sbh);
- idx = si->curidx;
- pll_type = PLL_TYPE1;
-
- INTR_OFF(si, intr_val);
-
- /* switch to extif or chipc core */
- if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
- n = R_REG(si->osh, &eir->clockcontrol_n);
- m = R_REG(si->osh, &eir->clockcontrol_sb);
- } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-
- cap = R_REG(si->osh, &cc->capabilities);
-
- if (cap & CC_CAP_PMU) {
-
- if (sb_chip(sbh) == BCM5354_CHIP_ID) {
- /* 5354 has a constant sb clock of 120MHz */
- rate = 120000000;
- goto end;
- } else
- if (sb_chip(sbh) == BCM4328_CHIP_ID) {
- rate = 80000000;
- goto end;
- } else
- ASSERT(0);
- }
-
- pll_type = cap & CC_CAP_PLL_MASK;
- if (pll_type == PLL_NONE) {
- INTR_RESTORE(si, intr_val);
- return 80000000;
- }
- n = R_REG(si->osh, &cc->clockcontrol_n);
- if (pll_type == PLL_TYPE6)
- m = R_REG(si->osh, &cc->clockcontrol_m3);
- else if (pll_type == PLL_TYPE3
- && !(BCMINIT(sb_chip) (sbh) == 0x5365))
- m = R_REG(si->osh, &cc->clockcontrol_m2);
- else
- m = R_REG(si->osh, &cc->clockcontrol_sb);
- } else {
- INTR_RESTORE(si, intr_val);
- return 0;
- }
-
- /* calculate rate */
- if (BCMINIT(sb_chip) (sbh) == 0x5365)
- rate = 100000000;
- else {
- rate = sb_clock_rate(pll_type, n, m);
-
- if (pll_type == PLL_TYPE3)
- rate = rate / 2;
- }
-
- end:
- /* switch back to previous core */
- sb_setcoreidx(sbh, idx);
-
- INTR_RESTORE(si, intr_val);
-
- return rate;
-}
-
-uint32 BCMINITFN(sb_alp_clock) (sb_t * sbh) {
- uint32 clock = ALP_CLOCK;
-
- if (sbh->cccaps & CC_CAP_PMU)
- clock = sb_pmu_alp_clock(sbh, sb_osh(sbh));
-
- return clock;
-}
-
-/* change logical "focus" to the gpio core for optimized access */
-void *sb_gpiosetcore(sb_t * sbh)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- return (sb_setcoreidx(sbh, si->gpioidx));
-}
-
-/* mask&set gpiocontrol bits */
-uint32 sb_gpiocontrol(sb_t * sbh, uint32 mask, uint32 val, uint8 priority)
-{
- sb_info_t *si;
- uint regoff;
-
- si = SB_INFO(sbh);
- regoff = 0;
-
- /* gpios could be shared on router platforms
- * ignore reservation if it's high priority (e.g., test apps)
- */
- if ((priority != GPIO_HI_PRIORITY) &&
- (BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
- mask = priority ? (sb_gpioreservation & mask) :
- ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
- val &= mask;
- }
-
- switch (si->gpioid) {
- case SB_CC:
- regoff = OFFSETOF(chipcregs_t, gpiocontrol);
- break;
-
- case SB_PCI:
- regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
- break;
-
- case SB_EXTIF:
- return (0);
- }
-
- return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-}
-
-/* mask&set gpio output enable bits */
-uint32 sb_gpioouten(sb_t * sbh, uint32 mask, uint32 val, uint8 priority)
-{
- sb_info_t *si;
- uint regoff;
-
- si = SB_INFO(sbh);
- regoff = 0;
-
- /* gpios could be shared on router platforms
- * ignore reservation if it's high priority (e.g., test apps)
- */
- if ((priority != GPIO_HI_PRIORITY) &&
- (BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
- mask = priority ? (sb_gpioreservation & mask) :
- ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
- val &= mask;
- }
-
- switch (si->gpioid) {
- case SB_CC:
- regoff = OFFSETOF(chipcregs_t, gpioouten);
- break;
-
- case SB_PCI:
- regoff = OFFSETOF(sbpciregs_t, gpioouten);
- break;
-
- case SB_EXTIF:
- regoff = OFFSETOF(extifregs_t, gpio[0].outen);
- break;
- }
-
- return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-}
-
-/* mask&set gpio output bits */
-uint32 sb_gpioout(sb_t * sbh, uint32 mask, uint32 val, uint8 priority)
-{
- sb_info_t *si;
- uint regoff;
-
- si = SB_INFO(sbh);
- regoff = 0;
-
- /* gpios could be shared on router platforms
- * ignore reservation if it's high priority (e.g., test apps)
- */
- if ((priority != GPIO_HI_PRIORITY) &&
- (BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
- mask = priority ? (sb_gpioreservation & mask) :
- ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
- val &= mask;
- }
-
- switch (si->gpioid) {
- case SB_CC:
- regoff = OFFSETOF(chipcregs_t, gpioout);
- break;
-
- case SB_PCI:
- regoff = OFFSETOF(sbpciregs_t, gpioout);
- break;
-
- case SB_EXTIF:
- regoff = OFFSETOF(extifregs_t, gpio[0].out);
- break;
- }
-
- return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-}
-
-/* reserve one gpio */
-uint32 sb_gpioreserve(sb_t * sbh, uint32 gpio_bitmask, uint8 priority)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- /* only cores on SB_BUS share GPIO's and only applcation users need to
- * reserve/release GPIO
- */
- if ((BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) {
- ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
- return -1;
- }
- /* make sure only one bit is set */
- if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
- ASSERT((gpio_bitmask)
- && !((gpio_bitmask) & (gpio_bitmask - 1)));
- return -1;
- }
-
- /* already reserved */
- if (sb_gpioreservation & gpio_bitmask)
- return -1;
- /* set reservation */
- sb_gpioreservation |= gpio_bitmask;
-
- return sb_gpioreservation;
-}
-
-/* release one gpio */
-/*
- * releasing the gpio doesn't change the current value on the GPIO last write value
- * persists till some one overwrites it
-*/
-
-uint32 sb_gpiorelease(sb_t * sbh, uint32 gpio_bitmask, uint8 priority)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- /* only cores on SB_BUS share GPIO's and only applcation users need to
- * reserve/release GPIO
- */
- if ((BUSTYPE(si->sb.bustype) != SB_BUS) || (!priority)) {
- ASSERT((BUSTYPE(si->sb.bustype) == SB_BUS) && (priority));
- return -1;
- }
- /* make sure only one bit is set */
- if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
- ASSERT((gpio_bitmask)
- && !((gpio_bitmask) & (gpio_bitmask - 1)));
- return -1;
- }
-
- /* already released */
- if (!(sb_gpioreservation & gpio_bitmask))
- return -1;
-
- /* clear reservation */
- sb_gpioreservation &= ~gpio_bitmask;
-
- return sb_gpioreservation;
-}
-
-/* return the current gpioin register value */
-uint32 sb_gpioin(sb_t * sbh)
-{
- sb_info_t *si;
- uint regoff;
-
- si = SB_INFO(sbh);
- regoff = 0;
-
- switch (si->gpioid) {
- case SB_CC:
- regoff = OFFSETOF(chipcregs_t, gpioin);
- break;
-
- case SB_PCI:
- regoff = OFFSETOF(sbpciregs_t, gpioin);
- break;
-
- case SB_EXTIF:
- regoff = OFFSETOF(extifregs_t, gpioin);
- break;
- }
-
- return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0));
-}
-
-/* mask&set gpio interrupt polarity bits */
-uint32 sb_gpiointpolarity(sb_t * sbh, uint32 mask, uint32 val, uint8 priority)
-{
- sb_info_t *si;
- uint regoff;
-
- si = SB_INFO(sbh);
- regoff = 0;
-
- /* gpios could be shared on router platforms */
- if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
- mask = priority ? (sb_gpioreservation & mask) :
- ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
- val &= mask;
- }
-
- switch (si->gpioid) {
- case SB_CC:
- regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
- break;
-
- case SB_PCI:
- /* pci gpio implementation does not support interrupt polarity */
- ASSERT(0);
- break;
-
- case SB_EXTIF:
- regoff = OFFSETOF(extifregs_t, gpiointpolarity);
- break;
- }
-
- return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-}
-
-/* mask&set gpio interrupt mask bits */
-uint32 sb_gpiointmask(sb_t * sbh, uint32 mask, uint32 val, uint8 priority)
-{
- sb_info_t *si;
- uint regoff;
-
- si = SB_INFO(sbh);
- regoff = 0;
-
- /* gpios could be shared on router platforms */
- if ((BUSTYPE(si->sb.bustype) == SB_BUS) && (val || mask)) {
- mask = priority ? (sb_gpioreservation & mask) :
- ((sb_gpioreservation | mask) & ~(sb_gpioreservation));
- val &= mask;
- }
-
- switch (si->gpioid) {
- case SB_CC:
- regoff = OFFSETOF(chipcregs_t, gpiointmask);
- break;
-
- case SB_PCI:
- /* pci gpio implementation does not support interrupt mask */
- ASSERT(0);
- break;
-
- case SB_EXTIF:
- regoff = OFFSETOF(extifregs_t, gpiointmask);
- break;
- }
-
- return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-}
-
-/* assign the gpio to an led */
-uint32 sb_gpioled(sb_t * sbh, uint32 mask, uint32 val)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- if (si->sb.ccrev < 16)
- return -1;
-
- /* gpio led powersave reg */
- return (sb_corereg
- (sbh, SB_CC_IDX, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask,
- val));
-}
-
-/* mask&set gpio timer val */
-uint32 sb_gpiotimerval(sb_t * sbh, uint32 mask, uint32 gpiotimerval)
-{
- sb_info_t *si;
- si = SB_INFO(sbh);
-
- if (si->sb.ccrev < 16)
- return -1;
-
- return (sb_corereg(sbh, SB_CC_IDX,
- OFFSETOF(chipcregs_t, gpiotimerval), mask,
- gpiotimerval));
-}
-
-uint32 sb_gpiopull(sb_t * sbh, bool updown, uint32 mask, uint32 val)
-{
- sb_info_t *si;
- uint offs;
-
- si = SB_INFO(sbh);
- if (si->sb.ccrev < 20)
- return -1;
-
- offs =
- (updown ? OFFSETOF(chipcregs_t, gpiopulldown) :
- OFFSETOF(chipcregs_t, gpiopullup));
- return (sb_corereg(sbh, SB_CC_IDX, offs, mask, val));
-}
-
-uint32 sb_gpioevent(sb_t * sbh, uint regtype, uint32 mask, uint32 val)
-{
- sb_info_t *si;
- uint offs;
-
- si = SB_INFO(sbh);
- if (si->sb.ccrev < 11)
- return -1;
-
- if (regtype == GPIO_REGEVT)
- offs = OFFSETOF(chipcregs_t, gpioevent);
- else if (regtype == GPIO_REGEVT_INTMSK)
- offs = OFFSETOF(chipcregs_t, gpioeventintmask);
- else if (regtype == GPIO_REGEVT_INTPOL)
- offs = OFFSETOF(chipcregs_t, gpioeventintpolarity);
- else
- return -1;
-
- return (sb_corereg(sbh, SB_CC_IDX, offs, mask, val));
-}
-
-void *BCMINITFN(sb_gpio_handler_register) (sb_t * sbh, uint32 event,
- bool level, gpio_handler_t cb,
- void *arg) {
- sb_info_t *si;
- gpioh_item_t *gi;
-
- ASSERT(event);
- ASSERT(cb);
-
- si = SB_INFO(sbh);
- if (si->sb.ccrev < 11)
- return NULL;
-
- if ((gi = MALLOC(si->osh, sizeof(gpioh_item_t))) == NULL)
- return NULL;
-
- bzero(gi, sizeof(gpioh_item_t));
- gi->event = event;
- gi->handler = cb;
- gi->arg = arg;
- gi->level = level;
-
- gi->next = si->gpioh_head;
- si->gpioh_head = gi;
-
- return (void *)(gi);
-}
-
-void BCMINITFN(sb_gpio_handler_unregister) (sb_t * sbh, void *gpioh) {
- sb_info_t *si;
- gpioh_item_t *p, *n;
-
- si = SB_INFO(sbh);
- if (si->sb.ccrev < 11)
- return;
-
- ASSERT(si->gpioh_head);
- if ((void *)si->gpioh_head == gpioh) {
- si->gpioh_head = si->gpioh_head->next;
- MFREE(si->osh, gpioh, sizeof(gpioh_item_t));
- return;
- } else {
- p = si->gpioh_head;
- n = p->next;
- while (n) {
- if ((void *)n == gpioh) {
- p->next = n->next;
- MFREE(si->osh, gpioh, sizeof(gpioh_item_t));
- return;
- }
- p = n;
- n = n->next;
- }
- }
-
- ASSERT(0); /* Not found in list */
-}
-
-void sb_gpio_handler_process(sb_t * sbh)
-{
- sb_info_t *si;
- gpioh_item_t *h;
- uint32 status;
- uint32 level = sb_gpioin(sbh);
- uint32 edge = sb_gpioevent(sbh, GPIO_REGEVT, 0, 0);
-
- si = SB_INFO(sbh);
- for (h = si->gpioh_head; h != NULL; h = h->next) {
- if (h->handler) {
- status = (h->level ? level : edge);
-
- if (status & h->event)
- h->handler(status, h->arg);
- }
- }
-
- sb_gpioevent(sbh, GPIO_REGEVT, edge, edge); /* clear edge-trigger status */
-}
-
-uint32 sb_gpio_int_enable(sb_t * sbh, bool enable)
-{
- sb_info_t *si;
- uint offs;
-
- si = SB_INFO(sbh);
- if (si->sb.ccrev < 11)
- return -1;
-
- offs = OFFSETOF(chipcregs_t, intmask);
- return (sb_corereg
- (sbh, SB_CC_IDX, offs, CI_GPIO, (enable ? CI_GPIO : 0)));
-}
-
-#ifdef BCMDBG
-void sb_dump(sb_t * sbh, struct bcmstrbuf *b)
-{
- sb_info_t *si;
- uint i;
-
- si = SB_INFO(sbh);
-
- bcm_bprintf(b,
- "si %p chip 0x%x chiprev 0x%x boardtype 0x%x boardvendor 0x%x bus %d\n",
- si, si->sb.chip, si->sb.chiprev, si->sb.boardtype,
- si->sb.boardvendor, si->sb.bustype);
- bcm_bprintf(b, "osh %p curmap %p\n", si->osh, si->curmap);
- bcm_bprintf(b,
- "sonicsrev %d ccrev %d buscoretype 0x%x buscorerev %d curidx %d\n",
- si->sb.sonicsrev, si->sb.ccrev, si->sb.buscoretype,
- si->sb.buscorerev, si->curidx);
-
- bcm_bprintf(b, "forceHT %d ASPM overflowPR42780 %d pcie_polarity %d\n",
- si->sb.pr32414, si->sb.pr42780, si->pcie_polarity);
-
- bcm_bprintf(b, "cores: ");
- for (i = 0; i < si->numcores; i++)
- bcm_bprintf(b, "0x%x ", si->coreid[i]);
- bcm_bprintf(b, "\n");
-}
-
-/* print interesting sbconfig registers */
-void sb_dumpregs(sb_t * sbh, struct bcmstrbuf *b)
-{
- sb_info_t *si;
- sbconfig_t *sb;
- uint origidx;
- uint curidx, i, intr_val = 0;
-
- si = SB_INFO(sbh);
- origidx = si->curidx;
-
- INTR_OFF(si, intr_val);
- curidx = si->curidx;
-
- for (i = 0; i < si->numcores; i++) {
- sb = REGS2SB(sb_setcoreidx(sbh, i));
-
- bcm_bprintf(b, "core 0x%x: \n", si->coreid[i]);
- bcm_bprintf(b,
- "sbtmstatelow 0x%x sbtmstatehigh 0x%x sbidhigh 0x%x "
- "sbimstate 0x%x\n sbimconfiglow 0x%x sbimconfighigh 0x%x\n",
- R_SBREG(si, &sb->sbtmstatelow), R_SBREG(si,
- &sb->
- sbtmstatehigh),
- R_SBREG(si, &sb->sbidhigh), R_SBREG(si,
- &sb->sbimstate),
- R_SBREG(si, &sb->sbimconfiglow), R_SBREG(si,
- &sb->
- sbimconfighigh));
- }
-
- sb_setcoreidx(sbh, origidx);
- INTR_RESTORE(si, intr_val);
-}
-
-void sb_view(sb_t * sbh)
-{
- sb_info_t *si;
- sbconfig_t *sb;
-
- si = SB_INFO(sbh);
- sb = REGS2SB(si->curmap);
-
- if (si->sb.sonicsrev > SONICS_2_2)
- SB_ERROR(("sbimerrlog 0x%x sbimerrloga 0x%x\n",
- sb_corereg(sbh, sb_coreidx(&si->sb), SBIMERRLOG, 0,
- 0), sb_corereg(sbh, sb_coreidx(&si->sb),
- SBIMERRLOGA, 0, 0)));
-
- SB_ERROR(("sbipsflag 0x%x sbtpsflag 0x%x sbtmerrloga 0x%x sbtmerrlog 0x%x\n", R_SBREG(si, &sb->sbipsflag), R_SBREG(si, &sb->sbtpsflag), R_SBREG(si, &sb->sbtmerrloga), R_SBREG(si, &sb->sbtmerrlog)));
- SB_ERROR(("sbadmatch3 0x%x sbadmatch2 0x%x sbadmatch1 0x%x\n",
- R_SBREG(si, &sb->sbadmatch3), R_SBREG(si, &sb->sbadmatch2),
- R_SBREG(si, &sb->sbadmatch1)));
- SB_ERROR(("sbimstate 0x%x sbintvec 0x%x sbtmstatelow 0x%x sbtmstatehigh 0x%x\n", R_SBREG(si, &sb->sbimstate), R_SBREG(si, &sb->sbintvec), R_SBREG(si, &sb->sbtmstatelow), R_SBREG(si, &sb->sbtmstatehigh)));
- SB_ERROR(("sbbwa0 0x%x sbimconfiglow 0x%x sbimconfighigh 0x%x sbadmatch0 0x%x\n", R_SBREG(si, &sb->sbbwa0), R_SBREG(si, &sb->sbimconfiglow), R_SBREG(si, &sb->sbimconfighigh), R_SBREG(si, &sb->sbadmatch0)));
- SB_ERROR(("sbtmconfiglow 0x%x sbtmconfighigh 0x%x sbbconfig 0x%x sbbstate 0x%x\n", R_SBREG(si, &sb->sbtmconfiglow), R_SBREG(si, &sb->sbtmconfighigh), R_SBREG(si, &sb->sbbconfig), R_SBREG(si, &sb->sbbstate)));
- SB_ERROR(("sbactcnfg 0x%x sbflagst 0x%x sbidlow 0x%x sbidhigh 0x%x\n",
- R_SBREG(si, &sb->sbactcnfg), R_SBREG(si, &sb->sbflagst),
- R_SBREG(si, &sb->sbidlow), R_SBREG(si, &sb->sbidhigh)));
-}
-
-void sb_viewall(sb_t * sbh)
-{
- sb_info_t *si;
- uint curidx, i;
- uint intr_val = 0;
-
- si = SB_INFO(sbh);
- curidx = si->curidx;
-
- for (i = 0; i < si->numcores; i++) {
- INTR_OFF(si, intr_val);
- sb_setcoreidx(sbh, i);
- sb_view(sbh);
- INTR_RESTORE(si, intr_val);
- }
-
- sb_setcoreidx(sbh, curidx);
-}
-#endif /* BCMDBG */
-
-/* return the slow clock source - LPO, XTAL, or PCI */
-static uint sb_slowclk_src(sb_info_t * si)
-{
- chipcregs_t *cc;
-
- ASSERT(sb_coreid(&si->sb) == SB_CC);
-
- if (si->sb.ccrev < 6) {
- if ((BUSTYPE(si->sb.bustype) == PCI_BUS) &&
- (OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32))
- & PCI_CFG_GPIO_SCS))
- return (SCC_SS_PCI);
- else
- return (SCC_SS_XTAL);
- } else if (si->sb.ccrev < 10) {
- cc = (chipcregs_t *) sb_setcoreidx(&si->sb, si->curidx);
- return (R_REG(si->osh, &cc->slow_clk_ctl) & SCC_SS_MASK);
- } else /* Insta-clock */
- return (SCC_SS_XTAL);
-}
-
-/* return the ILP (slowclock) min or max frequency */
-static uint sb_slowclk_freq(sb_info_t * si, bool max_freq)
-{
- chipcregs_t *cc;
- uint32 slowclk;
- uint div;
-
- ASSERT(sb_coreid(&si->sb) == SB_CC);
-
- cc = (chipcregs_t *) sb_setcoreidx(&si->sb, si->curidx);
-
- /* shouldn't be here unless we've established the chip has dynamic clk control */
- ASSERT(R_REG(si->osh, &cc->capabilities) & CC_CAP_PWR_CTL);
-
- slowclk = sb_slowclk_src(si);
- if (si->sb.ccrev < 6) {
- if (slowclk == SCC_SS_PCI)
- return (max_freq ? (PCIMAXFREQ / 64)
- : (PCIMINFREQ / 64));
- else
- return (max_freq ? (XTALMAXFREQ / 32)
- : (XTALMINFREQ / 32));
- } else if (si->sb.ccrev < 10) {
- div =
- 4 *
- (((R_REG(si->osh, &cc->slow_clk_ctl) & SCC_CD_MASK) >>
- SCC_CD_SHIFT)
- + 1);
- if (slowclk == SCC_SS_LPO)
- return (max_freq ? LPOMAXFREQ : LPOMINFREQ);
- else if (slowclk == SCC_SS_XTAL)
- return (max_freq ? (XTALMAXFREQ / div)
- : (XTALMINFREQ / div));
- else if (slowclk == SCC_SS_PCI)
- return (max_freq ? (PCIMAXFREQ / div)
- : (PCIMINFREQ / div));
- else
- ASSERT(0);
- } else {
- /* Chipc rev 10 is InstaClock */
- div = R_REG(si->osh, &cc->system_clk_ctl) >> SYCC_CD_SHIFT;
- div = 4 * (div + 1);
- return (max_freq ? XTALMAXFREQ : (XTALMINFREQ / div));
- }
- return (0);
-}
-
-static void BCMINITFN(sb_clkctl_setdelay) (sb_info_t * si, void *chipcregs) {
- chipcregs_t *cc;
- uint slowmaxfreq, pll_delay, slowclk;
- uint pll_on_delay, fref_sel_delay;
-
- pll_delay = PLL_DELAY;
-
- /* If the slow clock is not sourced by the xtal then add the xtal_on_delay
- * since the xtal will also be powered down by dynamic clk control logic.
- */
-
- slowclk = sb_slowclk_src(si);
- if (slowclk != SCC_SS_XTAL)
- pll_delay += XTAL_ON_DELAY;
-
- /* Starting with 4318 it is ILP that is used for the delays */
- slowmaxfreq = sb_slowclk_freq(si, (si->sb.ccrev >= 10) ? FALSE : TRUE);
-
- pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
- fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
-
- cc = (chipcregs_t *) chipcregs;
- W_REG(si->osh, &cc->pll_on_delay, pll_on_delay);
- W_REG(si->osh, &cc->fref_sel_delay, fref_sel_delay);
-}
-
-/* initialize power control delay registers */
-void BCMINITFN(sb_clkctl_init) (sb_t * sbh) {
- sb_info_t *si;
- uint origidx;
- chipcregs_t *cc;
-
- si = SB_INFO(sbh);
-
- origidx = si->curidx;
-
- if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0)) == NULL)
- return;
-
- if ((si->sb.chip == BCM4321_CHIP_ID) && (si->sb.chiprev < 2))
- W_REG(si->osh, &cc->chipcontrol,
- (si->sb.chiprev ==
- 0) ? CHIPCTRL_4321A0_DEFAULT : CHIPCTRL_4321A1_DEFAULT);
-
- if (!(R_REG(si->osh, &cc->capabilities) & CC_CAP_PWR_CTL))
- goto done;
-
- /* set all Instaclk chip ILP to 1 MHz */
- if (si->sb.ccrev >= 10)
- SET_REG(si->osh, &cc->system_clk_ctl, SYCC_CD_MASK,
- (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
-
- sb_clkctl_setdelay(si, (void *)(uintptr) cc);
-
- done:
- sb_setcoreidx(sbh, origidx);
-}
-
-/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
-uint16 BCMINITFN(sb_clkctl_fast_pwrup_delay) (sb_t * sbh) {
- sb_info_t *si;
- uint origidx;
- chipcregs_t *cc;
- uint slowminfreq;
- uint16 fpdelay;
- uint intr_val = 0;
-
- si = SB_INFO(sbh);
- fpdelay = 0;
- origidx = si->curidx;
-
- INTR_OFF(si, intr_val);
-
- if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0)) == NULL)
- goto done;
-
- if (sbh->cccaps & CC_CAP_PMU) {
- fpdelay = sb_pmu_fast_pwrup_delay(sbh, si->osh);
- goto done;
- }
-
- if (!(sbh->cccaps & CC_CAP_PWR_CTL))
- goto done;
-
- slowminfreq = sb_slowclk_freq(si, FALSE);
- fpdelay = (((R_REG(si->osh, &cc->pll_on_delay) + 2) * 1000000) +
- (slowminfreq - 1)) / slowminfreq;
-
- done:
- sb_setcoreidx(sbh, origidx);
- INTR_RESTORE(si, intr_val);
- return (fpdelay);
-}
-
-/* turn primary xtal and/or pll off/on */
-int sb_clkctl_xtal(sb_t * sbh, uint what, bool on)
-{
- sb_info_t *si;
- uint32 in, out, outen;
-
- si = SB_INFO(sbh);
-
- switch (BUSTYPE(si->sb.bustype)) {
-
- case PCMCIA_BUS:
- return (0);
-
- case PCI_BUS:
-
- /* pcie core doesn't have any mapping to control the xtal pu */
- if (PCIE(si))
- return -1;
-
- in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof(uint32));
- out =
- OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof(uint32));
- outen =
- OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN,
- sizeof(uint32));
-
- /*
- * Avoid glitching the clock if GPRS is already using it.
- * We can't actually read the state of the PLLPD so we infer it
- * by the value of XTAL_PU which *is* readable via gpioin.
- */
- if (on && (in & PCI_CFG_GPIO_XTAL))
- return (0);
-
- if (what & XTAL)
- outen |= PCI_CFG_GPIO_XTAL;
- if (what & PLL)
- outen |= PCI_CFG_GPIO_PLL;
-
- if (on) {
- /* turn primary xtal on */
- if (what & XTAL) {
- out |= PCI_CFG_GPIO_XTAL;
- if (what & PLL)
- out |= PCI_CFG_GPIO_PLL;
- OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT,
- sizeof(uint32), out);
- OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN,
- sizeof(uint32), outen);
- OSL_DELAY(XTAL_ON_DELAY);
- }
-
- /* turn pll on */
- if (what & PLL) {
- out &= ~PCI_CFG_GPIO_PLL;
- OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT,
- sizeof(uint32), out);
- OSL_DELAY(2000);
- }
- } else {
- if (what & XTAL)
- out &= ~PCI_CFG_GPIO_XTAL;
- if (what & PLL)
- out |= PCI_CFG_GPIO_PLL;
- OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT,
- sizeof(uint32), out);
- OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN,
- sizeof(uint32), outen);
- }
-
- default:
- return (-1);
- }
-
- return (0);
-}
-
-/* set dynamic clk control mode (forceslow, forcefast, dynamic) */
-/* returns true if we are forcing fast clock */
-bool sb_clkctl_clk(sb_t * sbh, uint mode)
-{
- sb_info_t *si;
- uint origidx;
- chipcregs_t *cc;
- uint32 scc;
- uint intr_val = 0;
-
- si = SB_INFO(sbh);
-
- /* chipcommon cores prior to rev6 don't support dynamic clock control */
- if (si->sb.ccrev < 6)
- return (FALSE);
-
- /* Chips with ccrev 10 are EOL and they don't have SYCC_HR which we use below */
- ASSERT(si->sb.ccrev != 10);
-
- INTR_OFF(si, intr_val);
-
- origidx = si->curidx;
-
- if (sb_setcore(sbh, SB_MIPS33, 0) && (sb_corerev(&si->sb) <= 7) &&
- (BUSTYPE(si->sb.bustype) == SB_BUS) && (si->sb.ccrev >= 10))
- goto done;
-
- if (FORCEHT_WAR32414(si))
- goto done;
-
- cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0);
- ASSERT(cc != NULL);
-
- if (!(R_REG(si->osh, &cc->capabilities) & CC_CAP_PWR_CTL)
- && (si->sb.ccrev < 20))
- goto done;
-
- switch (mode) {
- case CLK_FAST: /* force fast (pll) clock */
- if (si->sb.ccrev < 10) {
- /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
- sb_clkctl_xtal(&si->sb, XTAL, ON);
-
- SET_REG(si->osh, &cc->slow_clk_ctl,
- (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
- } else if (si->sb.ccrev < 20) {
- OR_REG(si->osh, &cc->system_clk_ctl, SYCC_HR);
- } else {
- OR_REG(si->osh, &cc->clk_ctl_st, CCS_FORCEHT);
- }
-
- /* wait for the PLL */
- if (R_REG(si->osh, &cc->capabilities) & CC_CAP_PMU) {
- SPINWAIT(((R_REG(si->osh, &cc->clk_ctl_st) &
- CCS_HTAVAIL) == 0), PMU_MAX_TRANSITION_DLY);
- ASSERT(R_REG(si->osh, &cc->clk_ctl_st) & CCS_HTAVAIL);
- } else {
- OSL_DELAY(PLL_DELAY);
- }
- break;
-
- case CLK_DYNAMIC: /* enable dynamic clock control */
- if (si->sb.ccrev < 10) {
- scc = R_REG(si->osh, &cc->slow_clk_ctl);
- scc &= ~(SCC_FS | SCC_IP | SCC_XC);
- if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
- scc |= SCC_XC;
- W_REG(si->osh, &cc->slow_clk_ctl, scc);
-
- /* for dynamic control, we have to release our xtal_pu "force on" */
- if (scc & SCC_XC)
- sb_clkctl_xtal(&si->sb, XTAL, OFF);
- } else if (si->sb.ccrev < 20) {
- /* Instaclock */
- AND_REG(si->osh, &cc->system_clk_ctl, ~SYCC_HR);
- } else {
- AND_REG(si->osh, &cc->clk_ctl_st, ~CCS_FORCEHT);
- }
- break;
-
- default:
- ASSERT(0);
- }
-
- done:
- sb_setcoreidx(sbh, origidx);
- INTR_RESTORE(si, intr_val);
- return (mode == CLK_FAST);
-}
-
-/* register driver interrupt disabling and restoring callback functions */
-void
-sb_register_intr_callback(sb_t * sbh, void *intrsoff_fn,
- void *intrsrestore_fn, void *intrsenabled_fn,
- void *intr_arg)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- si->intr_arg = intr_arg;
- si->intrsoff_fn = (sb_intrsoff_t) intrsoff_fn;
- si->intrsrestore_fn = (sb_intrsrestore_t) intrsrestore_fn;
- si->intrsenabled_fn = (sb_intrsenabled_t) intrsenabled_fn;
- /* save current core id. when this function called, the current core
- * must be the core which provides driver functions(il, et, wl, etc.)
- */
- si->dev_coreid = si->coreid[si->curidx];
-}
-
-void sb_deregister_intr_callback(sb_t * sbh)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- si->intrsoff_fn = NULL;
-}
-
-#ifdef BCMDBG
-/* dump dynamic clock control related registers */
-void sb_clkctl_dump(sb_t * sbh, struct bcmstrbuf *b)
-{
- sb_info_t *si;
- chipcregs_t *cc;
- uint origidx;
- uint intr_val = 0;
-
- si = SB_INFO(sbh);
-
- INTR_OFF(si, intr_val);
-
- origidx = si->curidx;
-
- if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0)) == NULL) {
- INTR_RESTORE(si, intr_val);
- return;
- }
-
- if (!(R_REG(si->osh, &cc->capabilities) & CC_CAP_PWR_CTL))
- goto done;
-
- bcm_bprintf(b, "pll_on_delay 0x%x fref_sel_delay 0x%x ",
- cc->pll_on_delay, cc->fref_sel_delay);
- if ((si->sb.ccrev >= 6) && (si->sb.ccrev < 10))
- bcm_bprintf(b, "slow_clk_ctl 0x%x ", cc->slow_clk_ctl);
- if (si->sb.ccrev >= 10) {
- bcm_bprintf(b, "system_clk_ctl 0x%x ", cc->system_clk_ctl);
- bcm_bprintf(b, "clkstatestretch 0x%x ", cc->clkstatestretch);
- }
- if (BUSTYPE(si->sb.bustype) == PCI_BUS)
- bcm_bprintf(b, "gpioout 0x%x gpioouten 0x%x ",
- OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT,
- sizeof(uint32)),
- OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN,
- sizeof(uint32)));
- bcm_bprintf(b, "\n");
-
- done:
- sb_setcoreidx(sbh, origidx);
- INTR_RESTORE(si, intr_val);
-}
-#endif /* BCMDBG */
-
-uint16 BCMINITFN(sb_d11_devid) (sb_t * sbh) {
- sb_info_t *si = SB_INFO(sbh);
- uint16 device;
-
-#if defined(BCM4328)
- /* Fix device id for dual band BCM4328 */
- if (sbh->chip == BCM4328_CHIP_ID &&
- (sbh->chippkg == BCM4328USBDUAL_PKG_ID
- || sbh->chippkg == BCM4328SDIODUAL_PKG_ID))
- device = BCM4328_D11DUAL_ID;
- else
-#endif /* BCM4328 */
- /* Let an nvram variable with devpath override devid */
- if ((device = (uint16) sb_getdevpathintvar(sbh, "devid")) != 0) ;
- /* Get devid from OTP/SPROM depending on where the SROM is read */
- else if ((device = (uint16) getintvar(si->vars, "devid")) != 0) ;
- /*
- * no longer support wl0id, but keep the code
- * here for backward compatibility.
- */
- else if ((device = (uint16) getintvar(si->vars, "wl0id")) != 0) ;
- /* Chip specific conversion */
- else if (sbh->chip == BCM4712_CHIP_ID) {
- if (sbh->chippkg == BCM4712SMALL_PKG_ID)
- device = BCM4306_D11G_ID;
- else
- device = BCM4306_D11DUAL_ID;
- }
- /* ignore it */
- else
- device = 0xffff;
-
- return device;
-}
-
-int
-BCMINITFN(sb_corepciid) (sb_t * sbh, uint func, uint16 * pcivendor,
- uint16 * pcidevice, uint8 * pciclass,
- uint8 * pcisubclass, uint8 * pciprogif,
- uint8 * pciheader) {
- uint16 vendor = 0xffff, device = 0xffff;
- uint8 class, subclass, progif = 0;
- uint8 header = PCI_HEADER_NORMAL;
- uint32 core = sb_coreid(sbh);
-
- /* Verify whether the function exists for the core */
- if (func >= (uint) (core == SB_USB20H ? 2 : 1))
- return -1;
-
- /* Known vendor translations */
- switch (sb_corevendor(sbh)) {
- case SB_VEND_BCM:
- vendor = VENDOR_BROADCOM;
- break;
- default:
- return -1;
- }
-
- /* Determine class based on known core codes */
- switch (core) {
- case SB_ILINE20:
- class = PCI_CLASS_NET;
- subclass = PCI_NET_ETHER;
- device = BCM47XX_ILINE_ID;
- break;
- case SB_ENET:
- class = PCI_CLASS_NET;
- subclass = PCI_NET_ETHER;
- device = BCM47XX_ENET_ID;
- break;
- case SB_GIGETH:
- class = PCI_CLASS_NET;
- subclass = PCI_NET_ETHER;
- device = BCM47XX_GIGETH_ID;
- break;
- case SB_SDRAM:
- case SB_MEMC:
- class = PCI_CLASS_MEMORY;
- subclass = PCI_MEMORY_RAM;
- device = (uint16) core;
- break;
- case SB_PCI:
- case SB_PCIE:
- class = PCI_CLASS_BRIDGE;
- subclass = PCI_BRIDGE_PCI;
- device = (uint16) core;
- header = PCI_HEADER_BRIDGE;
- break;
- case SB_MIPS:
- case SB_MIPS33:
- class = PCI_CLASS_CPU;
- subclass = PCI_CPU_MIPS;
- device = (uint16) core;
- break;
- case SB_CODEC:
- class = PCI_CLASS_COMM;
- subclass = PCI_COMM_MODEM;
- device = BCM47XX_V90_ID;
- break;
- case SB_USB:
- class = PCI_CLASS_SERIAL;
- subclass = PCI_SERIAL_USB;
- progif = 0x10; /* OHCI */
- device = BCM47XX_USB_ID;
- break;
- case SB_USB11H:
- class = PCI_CLASS_SERIAL;
- subclass = PCI_SERIAL_USB;
- progif = 0x10; /* OHCI */
- device = BCM47XX_USBH_ID;
- break;
- case SB_USB20H:
- class = PCI_CLASS_SERIAL;
- subclass = PCI_SERIAL_USB;
- progif = func == 0 ? 0x10 : 0x20; /* OHCI/EHCI */
- device = BCM47XX_USB20H_ID;
- header = 0x80; /* multifunction */
- break;
- case SB_IPSEC:
- class = PCI_CLASS_CRYPT;
- subclass = PCI_CRYPT_NETWORK;
- device = BCM47XX_IPSEC_ID;
- break;
- case SB_ROBO:
- class = PCI_CLASS_NET;
- subclass = PCI_NET_OTHER;
- device = BCM47XX_ROBO_ID;
- break;
- case SB_EXTIF:
- case SB_CC:
- class = PCI_CLASS_MEMORY;
- subclass = PCI_MEMORY_FLASH;
- device = (uint16) core;
- break;
- case SB_SATAXOR:
- class = PCI_CLASS_XOR;
- subclass = PCI_XOR_QDMA;
- device = BCM47XX_SATAXOR_ID;
- break;
- case SB_ATA100:
- class = PCI_CLASS_DASDI;
- subclass = PCI_DASDI_IDE;
- device = BCM47XX_ATA100_ID;
- break;
- case SB_USB11D:
- class = PCI_CLASS_SERIAL;
- subclass = PCI_SERIAL_USB;
- device = BCM47XX_USBD_ID;
- break;
- case SB_USB20D:
- class = PCI_CLASS_SERIAL;
- subclass = PCI_SERIAL_USB;
- device = BCM47XX_USB20D_ID;
- break;
- case SB_D11:
- class = PCI_CLASS_NET;
- subclass = PCI_NET_OTHER;
- device = sb_d11_devid(sbh);
- break;
-
- default:
- class = subclass = progif = 0xff;
- device = (uint16) core;
- break;
- }
-
- *pcivendor = vendor;
- *pcidevice = device;
- *pciclass = class;
- *pcisubclass = subclass;
- *pciprogif = progif;
- *pciheader = header;
-
- return 0;
-}
-
-/* use the mdio interface to read from mdio slaves */
-static int
-sb_pcie_mdioread(sb_info_t * si, uint physmedia, uint regaddr, uint * regval)
-{
- uint mdiodata;
- uint i = 0;
- sbpcieregs_t *pcieregs;
-
- pcieregs = (sbpcieregs_t *) sb_setcoreidx(&si->sb, si->sb.buscoreidx);
- ASSERT(pcieregs);
-
- /* enable mdio access to SERDES */
- W_REG(si->osh, (&pcieregs->mdiocontrol),
- MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL);
-
- mdiodata = MDIODATA_START | MDIODATA_READ |
- (physmedia << MDIODATA_DEVADDR_SHF) |
- (regaddr << MDIODATA_REGADDR_SHF) | MDIODATA_TA;
-
- W_REG(si->osh, &pcieregs->mdiodata, mdiodata);
-
- PR28829_DELAY();
-
- /* retry till the transaction is complete */
- while (i < 10) {
- if (R_REG(si->osh, &(pcieregs->mdiocontrol)) &
- MDIOCTL_ACCESS_DONE) {
- PR28829_DELAY();
- *regval =
- (R_REG(si->osh, &(pcieregs->mdiodata)) &
- MDIODATA_MASK);
- /* Disable mdio access to SERDES */
- W_REG(si->osh, (&pcieregs->mdiocontrol), 0);
- return 0;
- }
- OSL_DELAY(1000);
- i++;
- }
-
- SB_ERROR(("sb_pcie_mdioread: timed out\n"));
- /* Disable mdio access to SERDES */
- W_REG(si->osh, (&pcieregs->mdiocontrol), 0);
- return 1;
-}
-
-/* use the mdio interface to write to mdio slaves */
-static int
-sb_pcie_mdiowrite(sb_info_t * si, uint physmedia, uint regaddr, uint val)
-{
- uint mdiodata;
- uint i = 0;
- sbpcieregs_t *pcieregs;
-
- pcieregs = (sbpcieregs_t *) sb_setcoreidx(&si->sb, si->sb.buscoreidx);
- ASSERT(pcieregs);
-
- /* enable mdio access to SERDES */
- W_REG(si->osh, (&pcieregs->mdiocontrol),
- MDIOCTL_PREAM_EN | MDIOCTL_DIVISOR_VAL);
-
- mdiodata = MDIODATA_START | MDIODATA_WRITE |
- (physmedia << MDIODATA_DEVADDR_SHF) |
- (regaddr << MDIODATA_REGADDR_SHF) | MDIODATA_TA | val;
-
- W_REG(si->osh, (&pcieregs->mdiodata), mdiodata);
-
- PR28829_DELAY();
-
- /* retry till the transaction is complete */
- while (i < 10) {
- if (R_REG(si->osh, &(pcieregs->mdiocontrol)) &
- MDIOCTL_ACCESS_DONE) {
- /* Disable mdio access to SERDES */
- W_REG(si->osh, (&pcieregs->mdiocontrol), 0);
- return 0;
- }
- OSL_DELAY(1000);
- i++;
- }
-
- SB_ERROR(("sb_pcie_mdiowrite: timed out\n"));
- /* Disable mdio access to SERDES */
- W_REG(si->osh, (&pcieregs->mdiocontrol), 0);
- return 1;
-
-}
-
-/* indirect way to read pcie config regs */
-uint sb_pcie_readreg(void *sb, void *arg1, uint offset)
-{
- sb_info_t *si;
- sb_t *sbh;
- uint retval = 0xFFFFFFFF;
- sbpcieregs_t *pcieregs;
- uint addrtype;
-
- sbh = (sb_t *) sb;
- si = SB_INFO(sbh);
- ASSERT(PCIE(si));
-
- pcieregs = (sbpcieregs_t *) sb_setcore(sbh, SB_PCIE, 0);
- ASSERT(pcieregs);
-
- addrtype = (uint) ((uintptr) arg1);
- switch (addrtype) {
- case PCIE_CONFIGREGS:
- W_REG(si->osh, (&pcieregs->configaddr), offset);
- retval = R_REG(si->osh, &(pcieregs->configdata));
- break;
- case PCIE_PCIEREGS:
- W_REG(si->osh, &(pcieregs->pcieindaddr), offset);
- retval = R_REG(si->osh, &(pcieregs->pcieinddata));
- break;
- default:
- ASSERT(0);
- break;
- }
- return retval;
-}
-
-/* indirect way to write pcie config/mdio/pciecore regs */
-uint sb_pcie_writereg(sb_t * sbh, void *arg1, uint offset, uint val)
-{
- sb_info_t *si;
- sbpcieregs_t *pcieregs;
- uint addrtype;
-
- si = SB_INFO(sbh);
- ASSERT(PCIE(si));
-
- pcieregs = (sbpcieregs_t *) sb_setcore(sbh, SB_PCIE, 0);
- ASSERT(pcieregs);
-
- addrtype = (uint) ((uintptr) arg1);
-
- switch (addrtype) {
- case PCIE_CONFIGREGS:
- W_REG(si->osh, (&pcieregs->configaddr), offset);
- W_REG(si->osh, (&pcieregs->configdata), val);
- break;
- case PCIE_PCIEREGS:
- W_REG(si->osh, (&pcieregs->pcieindaddr), offset);
- W_REG(si->osh, (&pcieregs->pcieinddata), val);
- break;
- default:
- ASSERT(0);
- break;
- }
- return 0;
-}
-
-/* Build device path. Support SB, PCI, and JTAG for now. */
-int BCMINITFN(sb_devpath) (sb_t * sbh, char *path, int size) {
- int slen;
- ASSERT(path);
- ASSERT(size >= SB_DEVPATH_BUFSZ);
-
- if (!path || size <= 0)
- return -1;
-
- switch (BUSTYPE((SB_INFO(sbh))->sb.bustype)) {
- case SB_BUS:
- case JTAG_BUS:
- slen = snprintf(path, (size_t) size, "sb/%u/", sb_coreidx(sbh));
- break;
- case PCI_BUS:
- ASSERT((SB_INFO(sbh))->osh);
- slen = snprintf(path, (size_t) size, "pci/%u/%u/",
- OSL_PCI_BUS((SB_INFO(sbh))->osh),
- OSL_PCI_SLOT((SB_INFO(sbh))->osh));
- break;
- case PCMCIA_BUS:
- SB_ERROR(("sb_devpath: OSL_PCMCIA_BUS() not implemented, bus 1 assumed\n"));
- SB_ERROR(("sb_devpath: OSL_PCMCIA_SLOT() not implemented, slot 1 assumed\n"));
- slen = snprintf(path, (size_t) size, "pc/1/1/");
- break;
- default:
- slen = -1;
- ASSERT(0);
- break;
- }
-
- if (slen < 0 || slen >= size) {
- path[0] = '\0';
- return -1;
- }
-
- return 0;
-}
-
-/* Get a variable, but only if it has a devpath prefix */
-char *BCMINITFN(sb_getdevpathvar) (sb_t * sbh, const char *name) {
- char varname[SB_DEVPATH_BUFSZ + 32];
-
- sb_devpathvar(sbh, varname, sizeof(varname), name);
-
- return (getvar(NULL, varname));
-}
-
-/* Get a variable, but only if it has a devpath prefix */
-int BCMINITFN(sb_getdevpathintvar) (sb_t * sbh, const char *name) {
- char varname[SB_DEVPATH_BUFSZ + 32];
-
- sb_devpathvar(sbh, varname, sizeof(varname), name);
-
- return (getintvar(NULL, varname));
-}
-
-/* Concatenate the dev path with a varname into the given 'var' buffer
- * and return the 'var' pointer.
- * Nothing is done to the arguments if len == 0 or var is NULL, var is still returned.
- * On overflow, the first char will be set to '\0'.
- */
-static char *BCMINITFN(sb_devpathvar) (sb_t * sbh, char *var, int len,
- const char *name) {
- uint path_len;
-
- if (!var || len <= 0)
- return var;
-
- if (sb_devpath(sbh, var, len) == 0) {
- path_len = strlen(var);
-
- if (strlen(name) + 1 > (uint) (len - path_len))
- var[0] = '\0';
- else
- strncpy(var + path_len, name, len - path_len - 1);
- }
-
- return var;
-}
-
-/*
- * Fixup SROMless PCI device's configuration.
- * The current core may be changed upon return.
- */
-static int sb_pci_fixcfg(sb_info_t * si)
-{
- uint origidx, pciidx;
- sbpciregs_t *pciregs;
- sbpcieregs_t *pcieregs = NULL;
- uint16 val16, *reg16;
- uint32 w;
-
- ASSERT(BUSTYPE(si->sb.bustype) == PCI_BUS);
-
- /* Fixup PI in SROM shadow area to enable the correct PCI core access */
- /* save the current index */
- origidx = sb_coreidx(&si->sb);
-
- /* check 'pi' is correct and fix it if not */
- if (si->sb.buscoretype == SB_PCIE) {
- pcieregs = (sbpcieregs_t *) sb_setcore(&si->sb, SB_PCIE, 0);
- ASSERT(pcieregs);
- reg16 = &pcieregs->sprom[SRSH_PI_OFFSET];
- } else if (si->sb.buscoretype == SB_PCI) {
- pciregs = (sbpciregs_t *) sb_setcore(&si->sb, SB_PCI, 0);
- ASSERT(pciregs);
- reg16 = &pciregs->sprom[SRSH_PI_OFFSET];
- } else {
- ASSERT(0);
- return -1;
- }
- pciidx = sb_coreidx(&si->sb);
- val16 = R_REG(si->osh, reg16);
- if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (uint16) pciidx) {
- val16 =
- (uint16) (pciidx << SRSH_PI_SHIFT) | (val16 &
- ~SRSH_PI_MASK);
- W_REG(si->osh, reg16, val16);
- }
-
- if (PCIE_ASPMWARS(si)) {
- w = sb_pcie_readreg((void *)(uintptr) & si->sb,
- (void *)PCIE_PCIEREGS, PCIE_PLP_STATUSREG);
-
- /* Detect the current polarity at attach and force that polarity and
- * disable changing the polarity
- */
- if ((w & PCIE_PLP_POLARITYINV_STAT) == 0) {
- si->pcie_polarity = (SERDES_RX_CTRL_FORCE);
- } else {
- si->pcie_polarity = (SERDES_RX_CTRL_FORCE |
- SERDES_RX_CTRL_POLARITY);
- }
-
- w = OSL_PCI_READ_CONFIG(si->osh, si->pciecap_lcreg_offset,
- sizeof(uint32));
- if (w & PCIE_CLKREQ_ENAB) {
- reg16 = &pcieregs->sprom[SRSH_CLKREQ_OFFSET];
- val16 = R_REG(si->osh, reg16);
- /* if clockreq is not advertized clkreq should not be enabled */
- if (!(val16 & SRSH_CLKREQ_ENB))
- SB_ERROR(("WARNING: CLK REQ enabled already 0x%x\n", w));
- }
-
- sb_war43448(&si->sb);
-
- sb_war42767(&si->sb);
-
- }
-
- /* restore the original index */
- sb_setcoreidx(&si->sb, origidx);
-
- return 0;
-}
-
-/* Return ADDR64 capability of the backplane */
-bool sb_backplane64(sb_t * sbh)
-{
- sb_info_t *si;
-
- si = SB_INFO(sbh);
- return ((si->sb.cccaps & CC_CAP_BKPLN64) != 0);
-}
-
-void sb_btcgpiowar(sb_t * sbh)
-{
- sb_info_t *si;
- uint origidx;
- uint intr_val = 0;
- chipcregs_t *cc;
- si = SB_INFO(sbh);
-
- /* Make sure that there is ChipCommon core present &&
- * UART_TX is strapped to 1
- */
- if (!(si->sb.cccaps & CC_CAP_UARTGPIO))
- return;
-
- /* sb_corereg cannot be used as we have to guarantee 8-bit read/writes */
- INTR_OFF(si, intr_val);
-
- origidx = sb_coreidx(sbh);
-
- cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0);
- ASSERT(cc);
-
- W_REG(si->osh, &cc->uart0mcr, R_REG(si->osh, &cc->uart0mcr) | 0x04);
-
- /* restore the original index */
- sb_setcoreidx(sbh, origidx);
-
- INTR_RESTORE(si, intr_val);
-}
-
-/* check if the device is removed */
-bool sb_deviceremoved(sb_t * sbh)
-{
- uint32 w;
- sb_info_t *si;
-
- si = SB_INFO(sbh);
-
- switch (BUSTYPE(si->sb.bustype)) {
- case PCI_BUS:
- ASSERT(si->osh);
- w = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_VID, sizeof(uint32));
- if ((w & 0xFFFF) != VENDOR_BROADCOM)
- return TRUE;
- else
- return FALSE;
- default:
- return FALSE;
- }
- return FALSE;
-}
-
-#if 0
-/* Return the RAM size of the SOCRAM core */
-uint32 BCMINITFN(sb_socram_size) (sb_t * sbh) {
- sb_info_t *si;
- uint origidx;
- uint intr_val = 0;
-
- sbsocramregs_t *regs;
- bool wasup;
- uint corerev;
- uint32 coreinfo;
- uint memsize = 0;
-
- si = SB_INFO(sbh);
- ASSERT(si);
-
- /* Block ints and save current core */
- INTR_OFF(si, intr_val);
- origidx = sb_coreidx(sbh);
-
- /* Switch to SOCRAM core */
- if (!(regs = sb_setcore(sbh, SB_SOCRAM, 0)))
- goto done;
-
- /* Get info for determining size */
- if (!(wasup = sb_iscoreup(sbh)))
- sb_core_reset(sbh, 0, 0);
- corerev = sb_corerev(sbh);
- coreinfo = R_REG(si->osh, ®s->coreinfo);
-
- /* Calculate size from coreinfo based on rev */
- if (corerev == 0)
- memsize = 1 << (16 + (coreinfo & SRCI_MS0_MASK));
- else if (corerev < 3) {
- memsize = 1 << (SR_BSZ_BASE + (coreinfo & SRCI_SRBSZ_MASK));
- memsize *= (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
- } else {
- uint nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
- uint bsz = (coreinfo & SRCI_SRBSZ_MASK);
- uint lss = (coreinfo & SRCI_LSS_MASK) >> SRCI_LSS_SHIFT;
- if (lss != 0)
- nb--;
- memsize = nb * (1 << (bsz + SR_BSZ_BASE));
- if (lss != 0)
- memsize += (1 << ((lss - 1) + SR_BSZ_BASE));
- }
- /* Return to previous state and core */
- if (!wasup)
- sb_core_disable(sbh, 0);
- sb_setcoreidx(sbh, origidx);
-
- done:
- INTR_RESTORE(si, intr_val);
- return memsize;
-}
-
-#endif
+++ /dev/null
-/*
- * Generic setup routines for Broadcom MIPS boards
- *
- * Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Copyright 2005, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/serialP.h>
-#include <linux/ide.h>
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-#include <asm/time.h>
-#include <asm/reboot.h>
-
-#include <typedefs.h>
-#include <osl.h>
-#include <sbutils.h>
-#include <bcmnvram.h>
-#include <bcmdevs.h>
-#include <sbhndmips.h>
-#include <hndmips.h>
-#include <trxhdr.h>
-
-/* Virtual IRQ base, after last hw IRQ */
-#define SBMIPS_VIRTIRQ_BASE 6
-
-/* # IRQs, hw and sw IRQs */
-#define SBMIPS_NUMIRQS 8
-
-/* Global SB handle */
-sb_t *bcm947xx_sbh = NULL;
-spinlock_t bcm947xx_sbh_lock = SPIN_LOCK_UNLOCKED;
-
-/* Convenience */
-#define sbh bcm947xx_sbh
-#define sbh_lock bcm947xx_sbh_lock
-
-extern void bcm947xx_time_init(void);
-extern void bcm947xx_timer_setup(struct irqaction *irq);
-
-#ifdef CONFIG_REMOTE_DEBUG
-extern void set_debug_traps(void);
-extern void rs_kgdb_hook(struct serial_state *);
-extern void breakpoint(void);
-#endif
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-extern struct ide_ops std_ide_ops;
-#endif
-
-/* Kernel command line */
-char arcs_cmdline[CL_SIZE] __initdata = CONFIG_CMDLINE;
-extern void sb_serial_init(sb_t *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift));
-
-void
-bcm947xx_machine_restart(char *command)
-{
- printk("Please stand by while rebooting the system...\n");
-
- if (sb_chip(sbh) == BCM4785_CHIP_ID)
- MTC0(C0_BROADCOM, 4, (1 << 22));
-
- /* Set the watchdog timer to reset immediately */
- __cli();
- sb_watchdog(sbh, 1);
-
- if (sb_chip(sbh) == BCM4785_CHIP_ID) {
- __asm__ __volatile__(
- ".set\tmips3\n\t"
- "sync\n\t"
- "wait\n\t"
- ".set\tmips0");
- }
-
- while (1);
-}
-
-void
-bcm947xx_machine_halt(void)
-{
- printk("System halted\n");
-
- /* Disable interrupts and watchdog and spin forever */
- __cli();
- sb_watchdog(sbh, 0);
- while (1);
-}
-
-#ifdef CONFIG_SERIAL
-
-static int ser_line = 0;
-
-typedef struct {
- void *regs;
- uint irq;
- uint baud_base;
- uint reg_shift;
-} serial_port;
-
-static serial_port ports[4];
-static int num_ports = 0;
-
-static void
-serial_add(void *regs, uint irq, uint baud_base, uint reg_shift)
-{
- ports[num_ports].regs = regs;
- ports[num_ports].irq = irq;
- ports[num_ports].baud_base = baud_base;
- ports[num_ports].reg_shift = reg_shift;
- num_ports++;
-}
-
-static void
-do_serial_add(serial_port *port)
-{
- void *regs;
- uint irq;
- uint baud_base;
- uint reg_shift;
- struct serial_struct s;
-
- regs = port->regs;
- irq = port->irq;
- baud_base = port->baud_base;
- reg_shift = port->reg_shift;
-
- memset(&s, 0, sizeof(s));
-
- s.line = ser_line++;
- s.iomem_base = regs;
- s.irq = irq + 2;
- s.baud_base = baud_base / 16;
- s.flags = ASYNC_BOOT_AUTOCONF;
- s.io_type = SERIAL_IO_MEM;
- s.iomem_reg_shift = reg_shift;
-
- if (early_serial_setup(&s) != 0) {
- printk(KERN_ERR "Serial setup failed!\n");
- }
-}
-
-#endif /* CONFIG_SERIAL */
-
-void __init
-brcm_setup(void)
-{
- char *s;
- int i;
- char *value;
-
- /* Get global SB handle */
- sbh = sb_kattach(SB_OSH);
-
- /* Initialize clocks and interrupts */
- sb_mips_init(sbh, SBMIPS_VIRTIRQ_BASE);
-
- if (BCM330X(current_cpu_data.processor_id) &&
- (read_c0_diag() & BRCM_PFC_AVAIL)) {
- /*
- * Now that the sbh is inited set the proper PFC value
- */
- printk("Setting the PFC to its default value\n");
- enable_pfc(PFC_AUTO);
- }
-
-
-#ifdef CONFIG_SERIAL
- sb_serial_init(sbh, serial_add);
-
- /* reverse serial ports if nvram variable starts with console=ttyS1 */
- /* Initialize UARTs */
- s = nvram_get("kernel_args");
- if (!s) s = "";
- if (!strncmp(s, "console=ttyS1", 13)) {
- for (i = num_ports; i; i--)
- do_serial_add(&ports[i - 1]);
- } else {
- for (i = 0; i < num_ports; i++)
- do_serial_add(&ports[i]);
- }
-#endif
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ide_ops = &std_ide_ops;
-#endif
-
- /* Override default command line arguments */
- value = nvram_get("kernel_cmdline");
- if (value && strlen(value) && strncmp(value, "empty", 5))
- strncpy(arcs_cmdline, value, sizeof(arcs_cmdline));
-
-
- /* Generic setup */
- _machine_restart = bcm947xx_machine_restart;
- _machine_halt = bcm947xx_machine_halt;
- _machine_power_off = bcm947xx_machine_halt;
-
- board_time_init = bcm947xx_time_init;
- board_timer_setup = bcm947xx_timer_setup;
-}
-
-const char *
-get_system_type(void)
-{
- static char s[32];
-
- if (bcm947xx_sbh) {
- sprintf(s, "Broadcom BCM%X chip rev %d", sb_chip(bcm947xx_sbh),
- sb_chiprev(bcm947xx_sbh));
- return s;
- }
- else
- return "Broadcom BCM947XX";
-}
-
-void __init
-bus_error_init(void)
-{
-}
-
+++ /dev/null
-/*
- * Broadcom SiliconBackplane chipcommon serial flash interface
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <typedefs.h>
-#include <osl.h>
-#include "include/bcmutils.h"
-#include <sbutils.h>
-#include <sbconfig.h>
-#include <sbchipc.h>
-#include <bcmdevs.h>
-#include <sflash.h>
-
-/* Private global state */
-static struct sflash sflash;
-
-/* Issue a serial flash command */
-static INLINE void
-sflash_cmd(osl_t *osh, chipcregs_t *cc, uint opcode)
-{
- W_REG(osh, &cc->flashcontrol, SFLASH_START | opcode);
- while (R_REG(osh, &cc->flashcontrol) & SFLASH_BUSY);
-}
-
-/* Initialize serial flash access */
-struct sflash *
-sflash_init(sb_t *sbh, chipcregs_t *cc)
-{
- uint32 id, id2;
- osl_t *osh;
-
- ASSERT(sbh);
-
- osh = sb_osh(sbh);
-
- bzero(&sflash, sizeof(sflash));
-
- sflash.type = sbh->cccaps & CC_CAP_FLASH_MASK;
-
- switch (sflash.type) {
- case SFLASH_ST:
- /* Probe for ST chips */
- sflash_cmd(osh, cc, SFLASH_ST_DP);
- sflash_cmd(osh, cc, SFLASH_ST_RES);
- id = R_REG(osh, &cc->flashdata);
- switch (id) {
- case 0x11:
- /* ST M25P20 2 Mbit Serial Flash */
- sflash.blocksize = 64 * 1024;
- sflash.numblocks = 4;
- break;
- case 0x12:
- /* ST M25P40 4 Mbit Serial Flash */
- sflash.blocksize = 64 * 1024;
- sflash.numblocks = 8;
- break;
- case 0x13:
- /* ST M25P80 8 Mbit Serial Flash */
- sflash.blocksize = 64 * 1024;
- sflash.numblocks = 16;
- break;
- case 0x14:
- /* ST M25P16 16 Mbit Serial Flash */
- sflash.blocksize = 64 * 1024;
- sflash.numblocks = 32;
- break;
- case 0x15:
- /* ST M25P32 32 Mbit Serial Flash */
- sflash.blocksize = 64 * 1024;
- sflash.numblocks = 64;
- break;
- case 0x16:
- /* ST M25P64 64 Mbit Serial Flash */
- sflash.blocksize = 64 * 1024;
- sflash.numblocks = 128;
- break;
- case 0xbf:
- W_REG(osh, &cc->flashaddress, 1);
- sflash_cmd(osh, cc, SFLASH_ST_RES);
- id2 = R_REG(osh, &cc->flashdata);
- if (id2 == 0x44) {
- /* SST M25VF80 4 Mbit Serial Flash */
- sflash.blocksize = 64 * 1024;
- sflash.numblocks = 8;
- }
- break;
- }
- break;
-
- case SFLASH_AT:
- /* Probe for Atmel chips */
- sflash_cmd(osh, cc, SFLASH_AT_STATUS);
- id = R_REG(osh, &cc->flashdata) & 0x3c;
- switch (id) {
- case 0xc:
- /* Atmel AT45DB011 1Mbit Serial Flash */
- sflash.blocksize = 256;
- sflash.numblocks = 512;
- break;
- case 0x14:
- /* Atmel AT45DB021 2Mbit Serial Flash */
- sflash.blocksize = 256;
- sflash.numblocks = 1024;
- break;
- case 0x1c:
- /* Atmel AT45DB041 4Mbit Serial Flash */
- sflash.blocksize = 256;
- sflash.numblocks = 2048;
- break;
- case 0x24:
- /* Atmel AT45DB081 8Mbit Serial Flash */
- sflash.blocksize = 256;
- sflash.numblocks = 4096;
- break;
- case 0x2c:
- /* Atmel AT45DB161 16Mbit Serial Flash */
- sflash.blocksize = 512;
- sflash.numblocks = 4096;
- break;
- case 0x34:
- /* Atmel AT45DB321 32Mbit Serial Flash */
- sflash.blocksize = 512;
- sflash.numblocks = 8192;
- break;
- case 0x3c:
- /* Atmel AT45DB642 64Mbit Serial Flash */
- sflash.blocksize = 1024;
- sflash.numblocks = 8192;
- break;
- }
- break;
- }
-
- sflash.size = sflash.blocksize * sflash.numblocks;
- return sflash.size ? &sflash : NULL;
-}
-
-/* Read len bytes starting at offset into buf. Returns number of bytes read. */
-int
-sflash_read(sb_t *sbh, chipcregs_t *cc, uint offset, uint len, uchar *buf)
-{
- uint8 *from, *to;
- int cnt, i;
- osl_t *osh;
-
- ASSERT(sbh);
-
- if (!len)
- return 0;
-
- if ((offset + len) > sflash.size)
- return -22;
-
- if ((len >= 4) && (offset & 3))
- cnt = 4 - (offset & 3);
- else if ((len >= 4) && ((uintptr)buf & 3))
- cnt = 4 - ((uintptr)buf & 3);
- else
- cnt = len;
-
- osh = sb_osh(sbh);
-
- from = (uint8 *)(uintptr)OSL_UNCACHED(SB_FLASH2 + offset);
- to = (uint8 *)buf;
-
- if (cnt < 4) {
- for (i = 0; i < cnt; i ++) {
- *to = R_REG(osh, from);
- from ++;
- to ++;
- }
- return cnt;
- }
-
- while (cnt >= 4) {
- *(uint32 *)to = R_REG(osh, (uint32 *)from);
- from += 4;
- to += 4;
- cnt -= 4;
- }
-
- return (len - cnt);
-}
-
-/* Poll for command completion. Returns zero when complete. */
-int
-sflash_poll(sb_t *sbh, chipcregs_t *cc, uint offset)
-{
- osl_t *osh;
-
- ASSERT(sbh);
-
- osh = sb_osh(sbh);
-
- if (offset >= sflash.size)
- return -22;
-
- switch (sflash.type) {
- case SFLASH_ST:
- /* Check for ST Write In Progress bit */
- sflash_cmd(osh, cc, SFLASH_ST_RDSR);
- return R_REG(osh, &cc->flashdata) & SFLASH_ST_WIP;
- case SFLASH_AT:
- /* Check for Atmel Ready bit */
- sflash_cmd(osh, cc, SFLASH_AT_STATUS);
- return !(R_REG(osh, &cc->flashdata) & SFLASH_AT_READY);
- }
-
- return 0;
-}
-
-/* Write len bytes starting at offset into buf. Returns number of bytes
- * written. Caller should poll for completion.
- */
-int
-sflash_write(sb_t *sbh, chipcregs_t *cc, uint offset, uint len, const uchar *buf)
-{
- struct sflash *sfl;
- int ret = 0;
- bool is4712b0;
- uint32 page, byte, mask;
- osl_t *osh;
-
- ASSERT(sbh);
-
- osh = sb_osh(sbh);
-
- if (!len)
- return 0;
-
- if ((offset + len) > sflash.size)
- return -22;
-
- sfl = &sflash;
- switch (sfl->type) {
- case SFLASH_ST:
- is4712b0 = (sbh->chip == BCM4712_CHIP_ID) && (sbh->chiprev == 3);
- /* Enable writes */
- sflash_cmd(osh, cc, SFLASH_ST_WREN);
- if (is4712b0) {
- mask = 1 << 14;
- W_REG(osh, &cc->flashaddress, offset);
- W_REG(osh, &cc->flashdata, *buf++);
- /* Set chip select */
- OR_REG(osh, &cc->gpioout, mask);
- /* Issue a page program with the first byte */
- sflash_cmd(osh, cc, SFLASH_ST_PP);
- ret = 1;
- offset++;
- len--;
- while (len > 0) {
- if ((offset & 255) == 0) {
- /* Page boundary, drop cs and return */
- AND_REG(osh, &cc->gpioout, ~mask);
- if (!sflash_poll(sbh, cc, offset)) {
- /* Flash rejected command */
- return -11;
- }
- return ret;
- } else {
- /* Write single byte */
- sflash_cmd(osh, cc, *buf++);
- }
- ret++;
- offset++;
- len--;
- }
- /* All done, drop cs if needed */
- if ((offset & 255) != 1) {
- /* Drop cs */
- AND_REG(osh, &cc->gpioout, ~mask);
- if (!sflash_poll(sbh, cc, offset)) {
- /* Flash rejected command */
- return -12;
- }
- }
- } else if ( (sbh->ccrev >= 20) && (len != 1) ) {
- //} else if ( sbh->ccrev >= 20 ) { /* foxconn modified by EricHuang, 05/24/2007 */
- W_REG(NULL, &cc->flashaddress, offset);
- W_REG(NULL, &cc->flashdata, *buf++);
- /* Issue a page program with CSA bit set */
- sflash_cmd(osh, cc, SFLASH_ST_CSA | SFLASH_ST_PP);
- ret = 1;
- offset++;
- len--;
- while (len > 0) {
- if ((offset & 255) == 0) {
- /* Page boundary, poll droping cs and return */
- W_REG(NULL, &cc->flashcontrol, 0);
- /* wklin added start, 06/08/2007 */
- W_REG(NULL, &cc->flashcontrol, 0);
- OSL_DELAY(1);
- /* wklin added end, 06/08/2007 */
- /* wklin rmeoved start, 06/08/2007 */
-#if 0
- if (!sflash_poll(sbh, cc, offset)) {
- /* Flash rejected command */
- return -11;
- }
-#endif
- /* wklin removed end, 06/08/2007 */
- return ret;
- } else {
- /* Write single byte */
- sflash_cmd(osh, cc, SFLASH_ST_CSA | *buf++);
- }
- ret++;
- offset++;
- len--;
- }
- /* All done, drop cs if needed */
- if ((offset & 255) != 1) {
- /* Drop cs, poll */
- W_REG(NULL, &cc->flashcontrol, 0);
- /* wklin added start, 06/08/2007 */
- W_REG(NULL, &cc->flashcontrol, 0);
- OSL_DELAY(1);
- /* wklin added end, 06/08/2007 */
- /* wklin removed start, 06/08/2007 */
-#if 0
- if (!sflash_poll(sbh, cc, offset)) {
- /* Flash rejected command */
- return -12;
- }
-#endif
- /* wklin removed end, 06/08/2007 */
- }
- } else {
- ret = 1;
- W_REG(osh, &cc->flashaddress, offset);
- W_REG(osh, &cc->flashdata, *buf);
- /* Page program */
- sflash_cmd(osh, cc, SFLASH_ST_PP);
- }
- break;
- case SFLASH_AT:
- mask = sfl->blocksize - 1;
- page = (offset & ~mask) << 1;
- byte = offset & mask;
- /* Read main memory page into buffer 1 */
- if (byte || (len < sfl->blocksize)) {
- W_REG(osh, &cc->flashaddress, page);
- sflash_cmd(osh, cc, SFLASH_AT_BUF1_LOAD);
- /* 250 us for AT45DB321B */
- SPINWAIT(sflash_poll(sbh, cc, offset), 1000);
- ASSERT(!sflash_poll(sbh, cc, offset));
- }
- /* Write into buffer 1 */
- for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
- W_REG(osh, &cc->flashaddress, byte++);
- W_REG(osh, &cc->flashdata, *buf++);
- sflash_cmd(osh, cc, SFLASH_AT_BUF1_WRITE);
- }
- /* Write buffer 1 into main memory page */
- W_REG(osh, &cc->flashaddress, page);
- sflash_cmd(osh, cc, SFLASH_AT_BUF1_PROGRAM);
- break;
- }
-
- return ret;
-}
-
-/* Erase a region. Returns number of bytes scheduled for erasure.
- * Caller should poll for completion.
- */
-int
-sflash_erase(sb_t *sbh, chipcregs_t *cc, uint offset)
-{
- struct sflash *sfl;
- osl_t *osh;
-
- ASSERT(sbh);
-
- osh = sb_osh(sbh);
-
- if (offset >= sflash.size)
- return -22;
-
- sfl = &sflash;
- switch (sfl->type) {
- case SFLASH_ST:
- sflash_cmd(osh, cc, SFLASH_ST_WREN);
- W_REG(osh, &cc->flashaddress, offset);
- sflash_cmd(osh, cc, SFLASH_ST_SE);
- return sfl->blocksize;
- case SFLASH_AT:
- W_REG(osh, &cc->flashaddress, offset << 1);
- sflash_cmd(osh, cc, SFLASH_AT_PAGE_ERASE);
- return sfl->blocksize;
- }
-
- return 0;
-}
-
-/*
- * writes the appropriate range of flash, a NULL buf simply erases
- * the region of flash
- */
-int
-sflash_commit(sb_t *sbh, chipcregs_t *cc, uint offset, uint len, const uchar *buf)
-{
- struct sflash *sfl;
- uchar *block = NULL, *cur_ptr, *blk_ptr;
- uint blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
- uint blk_offset, blk_len, copied;
- int bytes, ret = 0;
- osl_t *osh;
-
- ASSERT(sbh);
-
- osh = sb_osh(sbh);
-
- /* Check address range */
- if (len <= 0)
- return 0;
-
- sfl = &sflash;
- if ((offset + len) > sfl->size)
- return -1;
-
- blocksize = sfl->blocksize;
- mask = blocksize - 1;
-
- /* Allocate a block of mem */
- if (!(block = MALLOC(osh, blocksize)))
- return -1;
-
- while (len) {
- /* Align offset */
- cur_offset = offset & ~mask;
- cur_length = blocksize;
- cur_ptr = block;
-
- remainder = blocksize - (offset & mask);
- if (len < remainder)
- cur_retlen = len;
- else
- cur_retlen = remainder;
-
- /* buf == NULL means erase only */
- if (buf) {
- /* Copy existing data into holding block if necessary */
- if ((offset & mask) || (len < blocksize)) {
- blk_offset = cur_offset;
- blk_len = cur_length;
- blk_ptr = cur_ptr;
-
- /* Copy entire block */
- while (blk_len) {
- copied = sflash_read(sbh, cc, blk_offset, blk_len, blk_ptr);
- blk_offset += copied;
- blk_len -= copied;
- blk_ptr += copied;
- }
- }
-
- /* Copy input data into holding block */
- memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
- }
-
- /* Erase block */
- if ((ret = sflash_erase(sbh, cc, (uint) cur_offset)) < 0)
- goto done;
- while (sflash_poll(sbh, cc, (uint) cur_offset));
-
- /* buf == NULL means erase only */
- if (!buf) {
- offset += cur_retlen;
- len -= cur_retlen;
- continue;
- }
-
- /* Write holding block */
- while (cur_length > 0) {
- if ((bytes = sflash_write(sbh, cc,
- (uint) cur_offset,
- (uint) cur_length,
- (uchar *) cur_ptr)) < 0) {
- ret = bytes;
- goto done;
- }
- while (sflash_poll(sbh, cc, (uint) cur_offset));
- cur_offset += bytes;
- cur_length -= bytes;
- cur_ptr += bytes;
- }
-
- offset += cur_retlen;
- len -= cur_retlen;
- buf += cur_retlen;
- }
-
- ret = len;
-done:
- if (block)
- MFREE(osh, block, blocksize);
- return ret;
-}
+++ /dev/null
-/*
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/serial_reg.h>
-#include <linux/interrupt.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-#include <typedefs.h>
-#include <osl.h>
-#include <bcmnvram.h>
-#include <sbconfig.h>
-#include <sbutils.h>
-#include <sbchipc.h>
-#include <hndmips.h>
-#include <mipsinc.h>
-#include <hndcpu.h>
-#include <bcmdevs.h>
-
-/* Global SB handle */
-extern void *bcm947xx_sbh;
-extern spinlock_t bcm947xx_sbh_lock;
-
-/* Convenience */
-#define sbh bcm947xx_sbh
-#define sbh_lock bcm947xx_sbh_lock
-
-extern int panic_timeout;
-static int watchdog = 0;
-
-void __init
-bcm947xx_time_init(void)
-{
- unsigned int hz;
-
- /*
- * Use deterministic values for initial counter interrupt
- * so that calibrate delay avoids encountering a counter wrap.
- */
- write_c0_count(0);
- write_c0_compare(0xffff);
-
- if (!(hz = sb_cpu_clock(sbh)))
- hz = 100000000;
-
- printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh),
- (hz + 500000) / 1000000);
-
- /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
- mips_hpt_frequency = hz / 2;
-
- /* Set watchdog interval in ms */
- watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0);
-
- /* Please set the watchdog to 3 sec if it is less than 3 but not equal to 0 */
- if (watchdog > 0) {
- if (watchdog < 3000)
- watchdog = 3000;
- }
-
- /* Set panic timeout in seconds */
- panic_timeout = watchdog / 1000;
-}
-
-static void
-bcm947xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- /* Generic MIPS timer code */
- timer_interrupt(irq, dev_id, regs);
-
- /* Set the watchdog timer to reset after the specified number of ms */
- if (watchdog > 0) {
- if (sb_chip(sbh) == BCM5354_CHIP_ID)
- sb_watchdog(sbh, WATCHDOG_CLOCK_5354 / 1000 * watchdog);
- else
- sb_watchdog(sbh, WATCHDOG_CLOCK / 1000 * watchdog);
- }
-
-}
-
-static struct irqaction bcm947xx_timer_irqaction = {
- bcm947xx_timer_interrupt,
- SA_INTERRUPT,
- 0,
- "timer",
- NULL,
- NULL
-};
-
-void __init
-bcm947xx_timer_setup(struct irqaction *irq)
-{
- int x;
-
- /* Enable the timer interrupt */
- setup_irq(7, &bcm947xx_timer_irqaction);
-
- sti();
-
- for (x=0; x<5; x++) {
- unsigned long ticks;
- ticks = jiffies;
- while (ticks == jiffies)
- /* do nothing */;
- }
-}
+++ /dev/null
-/*
- * Driver O/S-independent utility routines
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#include <typedefs.h>
-#include <bcmdefs.h>
-#include <stdarg.h>
-#include <osl.h>
-#include <sbutils.h>
-#include <bcmendian.h>
-#include "utils.h"
-
-/*******************************************************************************
- * crc8
- *
- * Computes a crc8 over the input data using the polynomial:
- *
- * x^8 + x^7 +x^6 + x^4 + x^2 + 1
- *
- * The caller provides the initial value (either CRC8_INIT_VALUE
- * or the previous returned value) to allow for processing of
- * discontiguous blocks of data. When generating the CRC the
- * caller is responsible for complementing the final return value
- * and inserting it into the byte stream. When checking, a final
- * return value of CRC8_GOOD_VALUE indicates a valid CRC.
- *
- * Reference: Dallas Semiconductor Application Note 27
- * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
- * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
- * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
- *
- * ****************************************************************************
- */
-
-static const uint8 crc8_table[256] = {
- 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
- 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
- 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
- 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
- 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
- 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
- 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
- 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
- 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
- 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
- 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
- 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
- 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
- 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
- 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
- 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
- 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
- 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
- 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
- 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
- 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
- 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
- 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
- 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
- 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
- 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
- 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
- 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
- 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
- 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
- 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
- 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
-};
-
-#define CRC_INNER_LOOP(n, c, x) \
- (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
-
-
-uint8 hndcrc8 (uint8 * pdata, /* pointer to array of data to process */
- uint nbytes, /* number of input data bytes to process */
- uint8 crc /* either CRC8_INIT_VALUE or previous return value */
- )
-{
- /* hard code the crc loop instead of using CRC_INNER_LOOP macro
- * to avoid the undefined and unnecessary (uint8 >> 8) operation.
- */
- while (nbytes-- > 0)
- crc = crc8_table[(crc ^ *pdata++) & 0xff];
-
- return crc;
-}
-
-char *
-bcm_ether_ntoa (struct ether_addr *ea, char *buf)
-{
- snprintf (buf, 18, "%02x:%02x:%02x:%02x:%02x:%02x",
- ea->octet[0] & 0xff, ea->octet[1] & 0xff, ea->octet[2] & 0xff,
- ea->octet[3] & 0xff, ea->octet[4] & 0xff, ea->octet[5] & 0xff);
- return (buf);
-}
-
+++ /dev/null
-#ifndef __bcm_utils_h
-#define __bcm_utils_h
-
-#define BCME_STRLEN 64 /* Max string length for BCM errors */
-#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST))
-
-/*
- * error codes could be added but the defined ones shouldn't be changed/deleted
- * these error codes are exposed to the user code
- * when ever a new error code is added to this list
- * please update errorstring table with the related error string and
- * update osl files with os specific errorcode map
-*/
-
-#define BCME_OK 0 /* Success */
-#define BCME_ERROR -1 /* Error generic */
-#define BCME_BADARG -2 /* Bad Argument */
-#define BCME_BADOPTION -3 /* Bad option */
-#define BCME_NOTUP -4 /* Not up */
-#define BCME_NOTDOWN -5 /* Not down */
-#define BCME_NOTAP -6 /* Not AP */
-#define BCME_NOTSTA -7 /* Not STA */
-#define BCME_BADKEYIDX -8 /* BAD Key Index */
-#define BCME_RADIOOFF -9 /* Radio Off */
-#define BCME_NOTBANDLOCKED -10 /* Not band locked */
-#define BCME_NOCLK -11 /* No Clock */
-#define BCME_BADRATESET -12 /* BAD Rate valueset */
-#define BCME_BADBAND -13 /* BAD Band */
-#define BCME_BUFTOOSHORT -14 /* Buffer too short */
-#define BCME_BUFTOOLONG -15 /* Buffer too long */
-#define BCME_BUSY -16 /* Busy */
-#define BCME_NOTASSOCIATED -17 /* Not Associated */
-#define BCME_BADSSIDLEN -18 /* Bad SSID len */
-#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel */
-#define BCME_BADCHAN -20 /* Bad Channel */
-#define BCME_BADADDR -21 /* Bad Address */
-#define BCME_NORESOURCE -22 /* Not Enough Resources */
-#define BCME_UNSUPPORTED -23 /* Unsupported */
-#define BCME_BADLEN -24 /* Bad length */
-#define BCME_NOTREADY -25 /* Not Ready */
-#define BCME_EPERM -26 /* Not Permitted */
-#define BCME_NOMEM -27 /* No Memory */
-#define BCME_ASSOCIATED -28 /* Associated */
-#define BCME_RANGE -29 /* Not In Range */
-#define BCME_NOTFOUND -30 /* Not Found */
-#define BCME_WME_NOT_ENABLED -31 /* WME Not Enabled */
-#define BCME_TSPEC_NOTFOUND -32 /* TSPEC Not Found */
-#define BCME_ACM_NOTSUPPORTED -33 /* ACM Not Supported */
-#define BCME_NOT_WME_ASSOCIATION -34 /* Not WME Association */
-#define BCME_SDIO_ERROR -35 /* SDIO Bus Error */
-#define BCME_DONGLE_DOWN -36 /* Dongle Not Accessible */
-#define BCME_VERSION -37 /* Incorrect version */
-#define BCME_LAST BCME_VERSION
-
-/* buffer length for ethernet address from bcm_ether_ntoa() */
-#define ETHER_ADDR_STR_LEN 18 /* 18-bytes of Ethernet address buffer length */
-
-struct ether_addr {
- unsigned char octet[6];
-};
-
-extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc);
-
-#endif /* __bcm_utils_h */
-
+++ /dev/null
-/*
- * Broadcom SiliconBackplane chipcommon serial flash interface
- *
- * Copyright 2006, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/mtd/compatmac.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#include <typedefs.h>
-#include <osl.h>
-// #include <bcmutils.h>
-#include <bcmdevs.h>
-#include <bcmnvram.h>
-#include <sbutils.h>
-#include <sbconfig.h>
-#include <sbchipc.h>
-#include <sflash.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-extern struct mtd_partition * init_mtd_partitions(struct mtd_info *mtd, size_t size);
-#endif
-
-struct sflash_mtd {
- sb_t *sbh;
- chipcregs_t *cc;
- struct semaphore lock;
- struct mtd_info mtd;
- struct mtd_erase_region_info region;
-};
-
-/* Private global state */
-static struct sflash_mtd sflash;
-
-static int
-sflash_mtd_poll(struct sflash_mtd *sflash, unsigned int offset, int timeout)
-{
- int now = jiffies;
- int ret = 0;
-
- for (;;) {
- if (!sflash_poll(sflash->sbh, sflash->cc, offset)) {
- ret = 0;
- break;
- }
- if (time_after(jiffies, now + timeout)) {
- printk(KERN_ERR "sflash: timeout\n");
- ret = -ETIMEDOUT;
- break;
- }
- if (current->need_resched) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(timeout / 10);
- } else
- udelay(1);
- }
-
- return ret;
-}
-
-static int
-sflash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-{
- struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv;
- int bytes, ret = 0;
-
- /* Check address range */
- if (len == 0){
- *retlen = 0;
- return 0;
- }
- if (!len)
- return 0;
- if ((from + len) > mtd->size)
- return -EINVAL;
-
- down(&sflash->lock);
-
- *retlen = 0;
- while (len) {
- if ((bytes = sflash_read(sflash->sbh, sflash->cc, (uint) from, len, buf)) < 0) {
- ret = bytes;
- break;
- }
- from += (loff_t) bytes;
- len -= bytes;
- buf += bytes;
- *retlen += bytes;
- }
-
- up(&sflash->lock);
-
- return ret;
-}
-
-static int
-sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-{
- struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv;
- int bytes, ret = 0;
-
- /* Check address range */
- if (len == 0){
- *retlen = 0;
- return 0;
- }
- if (!len)
- return 0;
- if ((to + len) > mtd->size)
- return -EINVAL;
-
- down(&sflash->lock);
-
- *retlen = 0;
- while (len) {
- if ((bytes = sflash_write(sflash->sbh, sflash->cc, (uint)to, (uint)len, buf)) < 0) {
- ret = bytes;
- break;
- }
- if ((ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10)))
- break;
- to += (loff_t) bytes;
- len -= bytes;
- buf += bytes;
- *retlen += bytes;
- }
-
- up(&sflash->lock);
-
- return ret;
-}
-
-static int
-sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase)
-{
- struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv;
- int i, j, ret = 0;
- unsigned int addr, len;
-
- /* Check address range */
- if (!erase->len)
- return 0;
- if ((erase->addr + erase->len) > mtd->size)
- return -EINVAL;
-
- addr = erase->addr;
- len = erase->len;
-
- down(&sflash->lock);
-
- /* Ensure that requested region is aligned */
- for (i = 0; i < mtd->numeraseregions; i++) {
- for (j = 0; j < mtd->eraseregions[i].numblocks; j++) {
- if (addr == mtd->eraseregions[i].offset + mtd->eraseregions[i].erasesize * j &&
- len >= mtd->eraseregions[i].erasesize) {
- if ((ret = sflash_erase(sflash->sbh, sflash->cc, addr)) < 0)
- break;
- if ((ret = sflash_mtd_poll(sflash, addr, 10 * HZ)))
- break;
- addr += mtd->eraseregions[i].erasesize;
- len -= mtd->eraseregions[i].erasesize;
- }
- }
- if (ret)
- break;
- }
-
- up(&sflash->lock);
-
- /* Set erase status */
- if (ret)
- erase->state = MTD_ERASE_FAILED;
- else
- erase->state = MTD_ERASE_DONE;
-
- /* Call erase callback */
- if (erase->callback)
- erase->callback(erase);
-
- return ret;
-}
-
-#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE)
-#define sflash_mtd_init init_module
-#define sflash_mtd_exit cleanup_module
-#endif
-
-mod_init_t
-sflash_mtd_init(void)
-{
- struct pci_dev *pdev;
- int ret = 0;
- struct sflash *info;
- uint i;
-#ifdef CONFIG_MTD_PARTITIONS
- struct mtd_partition *parts;
-#endif
-
- if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_CC, NULL))) {
- printk(KERN_ERR "sflash: chipcommon not found\n");
- return -ENODEV;
- }
-
- memset(&sflash, 0, sizeof(struct sflash_mtd));
- init_MUTEX(&sflash.lock);
-
- /* attach to the backplane */
- if (!(sflash.sbh = sb_kattach(SB_OSH))) {
- printk(KERN_ERR "sflash: error attaching to backplane\n");
- ret = -EIO;
- goto fail;
- }
-
- /* Map registers and flash base */
- if (!(sflash.cc = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0)))) {
- printk(KERN_ERR "sflash: error mapping registers\n");
- ret = -EIO;
- goto fail;
- }
-
- /* Initialize serial flash access */
- if (!(info = sflash_init(sflash.sbh, sflash.cc))) {
- printk(KERN_ERR "sflash: found no supported devices\n");
- ret = -ENODEV;
- goto fail;
- }
-
- printk(KERN_INFO "sflash: found serial flash; blocksize=%dKB, numblocks=%d, size=%dKB\n",info->blocksize/1024,info->numblocks,info->size/1024);
-
- /* Setup region info */
- sflash.region.offset = 0;
- sflash.region.erasesize = info->blocksize;
- sflash.region.numblocks = info->numblocks;
- if (sflash.region.erasesize > sflash.mtd.erasesize)
- sflash.mtd.erasesize = sflash.region.erasesize;
- sflash.mtd.size = info->size;
- sflash.mtd.numeraseregions = 1;
-
- /* Register with MTD */
- sflash.mtd.name = "sflash";
- sflash.mtd.type = MTD_NORFLASH;
- sflash.mtd.flags = MTD_CAP_NORFLASH;
- sflash.mtd.eraseregions = &sflash.region;
- sflash.mtd.module = THIS_MODULE;
- sflash.mtd.erase = sflash_mtd_erase;
- sflash.mtd.read = sflash_mtd_read;
- sflash.mtd.write = sflash_mtd_write;
- sflash.mtd.priv = &sflash;
-
-#ifdef CONFIG_MTD_PARTITIONS
- parts = init_mtd_partitions(&sflash.mtd, sflash.mtd.size);
- for (i = 0; parts[i].name; i++);
- ret = add_mtd_partitions(&sflash.mtd, parts, i);
-#else
- ret = add_mtd_device(&sflash.mtd);
-#endif
- if (ret) {
- printk(KERN_ERR "sflash: add_mtd failed\n");
- goto fail;
- }
-
- return 0;
-
- fail:
- if (sflash.cc)
- iounmap((void *) sflash.cc);
- if (sflash.sbh)
- sb_detach(sflash.sbh);
- return ret;
-}
-
-mod_exit_t
-sflash_mtd_exit(void)
-{
-#ifdef CONFIG_MTD_PARTITIONS
- del_mtd_partitions(&sflash.mtd);
-#else
- del_mtd_device(&sflash.mtd);
-#endif
- iounmap((void *) sflash.cc);
- sb_detach(sflash.sbh);
-}
-
-module_init(sflash_mtd_init);
-module_exit(sflash_mtd_exit);
+++ /dev/null
-/*
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
- * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
- *
- * original functions for finding root filesystem from Mike Baker
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Flash mapping for BCM947XX boards
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/wait.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-#include <linux/config.h>
-#include <linux/squashfs_fs.h>
-#include <linux/jffs2.h>
-#include <linux/crc32.h>
-#include <asm/io.h>
-
-#include <typedefs.h>
-#include <osl.h>
-#include <bcmnvram.h>
-#include <sbconfig.h>
-#include <sbchipc.h>
-#include <sbutils.h>
-#include <trxhdr.h>
-
-/* Global SB handle */
-extern void *bcm947xx_sbh;
-extern spinlock_t bcm947xx_sbh_lock;
-
-/* Convenience */
-#define sbh bcm947xx_sbh
-#define sbh_lock bcm947xx_sbh_lock
-
-#define WINDOW_ADDR 0x1fc00000
-#define WINDOW_SIZE 0x400000
-#define BUSWIDTH 2
-
-static struct mtd_info *bcm947xx_mtd;
-
-__u8 bcm947xx_map_read8(struct map_info *map, unsigned long ofs)
-{
- if (map->map_priv_2 == 1)
- return __raw_readb(map->map_priv_1 + ofs);
-
- u16 val = __raw_readw(map->map_priv_1 + (ofs & ~1));
- if (ofs & 1)
- return ((val >> 8) & 0xff);
- else
- return (val & 0xff);
-}
-
-__u16 bcm947xx_map_read16(struct map_info *map, unsigned long ofs)
-{
- return __raw_readw(map->map_priv_1 + ofs);
-}
-
-__u32 bcm947xx_map_read32(struct map_info *map, unsigned long ofs)
-{
- return __raw_readl(map->map_priv_1 + ofs);
-}
-
-void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
- if (len==1) {
- memcpy_fromio(to, map->map_priv_1 + from, len);
- } else {
- int i;
- u16 *dest = (u16 *) to;
- u16 *src = (u16 *) (map->map_priv_1 + from);
- for (i = 0; i < (len / 2); i++) {
- dest[i] = src[i];
- }
- if (len & 1)
- *((u8 *)dest+len-1) = src[i] & 0xff;
- }
-}
-
-void bcm947xx_map_write8(struct map_info *map, __u8 d, unsigned long adr)
-{
- __raw_writeb(d, map->map_priv_1 + adr);
- mb();
-}
-
-void bcm947xx_map_write16(struct map_info *map, __u16 d, unsigned long adr)
-{
- __raw_writew(d, map->map_priv_1 + adr);
- mb();
-}
-
-void bcm947xx_map_write32(struct map_info *map, __u32 d, unsigned long adr)
-{
- __raw_writel(d, map->map_priv_1 + adr);
- mb();
-}
-
-void bcm947xx_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
- memcpy_toio(map->map_priv_1 + to, from, len);
-}
-
-struct map_info bcm947xx_map = {
- name: "Physically mapped flash",
- size: WINDOW_SIZE,
- buswidth: BUSWIDTH,
- read8: bcm947xx_map_read8,
- read16: bcm947xx_map_read16,
- read32: bcm947xx_map_read32,
- copy_from: bcm947xx_map_copy_from,
- write8: bcm947xx_map_write8,
- write16: bcm947xx_map_write16,
- write32: bcm947xx_map_write32,
- copy_to: bcm947xx_map_copy_to
-};
-
-#ifdef CONFIG_MTD_PARTITIONS
-
-static struct mtd_partition bcm947xx_parts[] = {
- { name: "cfe", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
- { name: "linux", offset: 0, size: 0, },
- { name: "rootfs", offset: 0, size: 0, },
- { name: "nvram", offset: 0, size: 0, },
- { name: "rootfs_data", offset: 0, size: 0, },
- { name: NULL, },
-};
-
-static int __init
-find_cfe_size(struct mtd_info *mtd, size_t size)
-{
- struct trx_header *trx;
- unsigned char buf[512];
- int off;
- size_t len;
- int blocksize;
-
- trx = (struct trx_header *) buf;
-
- blocksize = mtd->erasesize;
- if (blocksize < 0x10000)
- blocksize = 0x10000;
-
- for (off = (128*1024); off < size; off += blocksize) {
- memset(buf, 0xe5, sizeof(buf));
-
- /*
- * Read into buffer
- */
- if (MTD_READ(mtd, off, sizeof(buf), &len, buf) ||
- len != sizeof(buf))
- continue;
-
- /* found a TRX header */
- if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
- goto found;
- }
- }
-
- printk(KERN_NOTICE
- "%s: Couldn't find bootloader size\n",
- mtd->name);
- return -1;
-
- found:
- printk(KERN_NOTICE "bootloader size: %d\n", off);
- return off;
-
-}
-
-/*
- * Copied from mtdblock.c
- *
- * Cache stuff...
- *
- * Since typical flash erasable sectors are much larger than what Linux's
- * buffer cache can handle, we must implement read-modify-write on flash
- * sectors for each block write requests. To avoid over-erasing flash sectors
- * and to speed things up, we locally cache a whole flash sector while it is
- * being written to until a different sector is required.
- */
-
-static void erase_callback(struct erase_info *done)
-{
- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
- wake_up(wait_q);
-}
-
-static int erase_write (struct mtd_info *mtd, unsigned long pos,
- int len, const char *buf)
-{
- struct erase_info erase;
- DECLARE_WAITQUEUE(wait, current);
- wait_queue_head_t wait_q;
- size_t retlen;
- int ret;
-
- /*
- * First, let's erase the flash block.
- */
-
- init_waitqueue_head(&wait_q);
- erase.mtd = mtd;
- erase.callback = erase_callback;
- erase.addr = pos;
- erase.len = len;
- erase.priv = (u_long)&wait_q;
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&wait_q, &wait);
-
- ret = MTD_ERASE(mtd, &erase);
- if (ret) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&wait_q, &wait);
- printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
- "on \"%s\" failed\n",
- pos, len, mtd->name);
- return ret;
- }
-
- schedule(); /* Wait for erase to finish. */
- remove_wait_queue(&wait_q, &wait);
-
- /*
- * Next, writhe data to flash.
- */
-
- ret = MTD_WRITE (mtd, pos, len, &retlen, buf);
- if (ret)
- return ret;
- if (retlen != len)
- return -EIO;
- return 0;
-}
-
-
-
-
-static int __init
-find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
-{
- struct trx_header trx, *trx2;
- unsigned char buf[512], *block;
- int off, blocksize;
- u32 i, crc = ~0;
- size_t len;
- struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
-
- blocksize = mtd->erasesize;
- if (blocksize < 0x10000)
- blocksize = 0x10000;
-
- for (off = (128*1024); off < size; off += blocksize) {
- memset(&trx, 0xe5, sizeof(trx));
-
- /*
- * Read into buffer
- */
- if (MTD_READ(mtd, off, sizeof(trx), &len, (char *) &trx) ||
- len != sizeof(trx))
- continue;
-
- /* found a TRX header */
- if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
- part->offset = le32_to_cpu(trx.offsets[2]) ? :
- le32_to_cpu(trx.offsets[1]);
- part->size = le32_to_cpu(trx.len);
-
- part->size -= part->offset;
- part->offset += off;
-
- goto found;
- }
- }
-
- printk(KERN_NOTICE
- "%s: Couldn't find root filesystem\n",
- mtd->name);
- return -1;
-
- found:
- if (part->size == 0)
- return 0;
-
- if (MTD_READ(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
- return 0;
-
- if (*((__u32 *) buf) == SQUASHFS_MAGIC) {
- printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n", mtd->name, (u32) sb->bytes_used);
-
- /* Update the squashfs partition size based on the superblock info */
- part->size = sb->bytes_used;
- len = part->offset + part->size;
- len += (mtd->erasesize - 1);
- len &= ~(mtd->erasesize - 1);
- part->size = len - part->offset;
- } else if (*((__u16 *) buf) == JFFS2_MAGIC_BITMASK) {
- printk(KERN_INFO "%s: Filesystem type: jffs2\n", mtd->name);
-
- /* Move the squashfs outside of the trx */
- part->size = 0;
- } else {
- printk(KERN_INFO "%s: Filesystem type: unknown\n", mtd->name);
- return 0;
- }
-
- if (trx.len != part->offset + part->size - off) {
- /* Update the trx offsets and length */
- trx.len = part->offset + part->size - off;
-
- /* Update the trx crc32 */
- for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
- if (MTD_READ(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
- return 0;
- crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
- }
- trx.crc32 = crc;
-
- /* read first eraseblock from the trx */
- trx2 = block = kmalloc(mtd->erasesize, GFP_KERNEL);
- if (MTD_READ(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) {
- printk("Error accessing the first trx eraseblock\n");
- return 0;
- }
-
- printk("Updating TRX offsets and length:\n");
- printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
- printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32);
-
- /* Write updated trx header to the flash */
- memcpy(block, &trx, sizeof(trx));
- if (mtd->unlock)
- mtd->unlock(mtd, off, mtd->erasesize);
- erase_write(mtd, off, mtd->erasesize, block);
- if (mtd->sync)
- mtd->sync(mtd);
- kfree(block);
- printk("Done\n");
- }
-
- return part->size;
-}
-
-struct mtd_partition * __init
-init_mtd_partitions(struct mtd_info *mtd, size_t size)
-{
- int cfe_size;
-
- if ((cfe_size = find_cfe_size(mtd,size)) < 0)
- return NULL;
-
- /* boot loader */
- bcm947xx_parts[0].offset = 0;
- bcm947xx_parts[0].size = cfe_size;
-
- /* nvram */
- if (cfe_size != 384 * 1024) {
- bcm947xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
- bcm947xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
- } else {
- /* nvram (old 128kb config partition on netgear wgt634u) */
- bcm947xx_parts[3].offset = bcm947xx_parts[0].size;
- bcm947xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
- }
-
- /* linux (kernel and rootfs) */
- if (cfe_size != 384 * 1024) {
- bcm947xx_parts[1].offset = bcm947xx_parts[0].size;
- bcm947xx_parts[1].size = bcm947xx_parts[3].offset -
- bcm947xx_parts[1].offset;
- } else {
- /* do not count the elf loader, which is on one block */
- bcm947xx_parts[1].offset = bcm947xx_parts[0].size +
- bcm947xx_parts[3].size + mtd->erasesize;
- bcm947xx_parts[1].size = size -
- bcm947xx_parts[0].size -
- (2*bcm947xx_parts[3].size) -
- mtd->erasesize;
- }
-
- /* find and size rootfs */
- if (find_root(mtd,size,&bcm947xx_parts[2])==0) {
- /* entirely jffs2 */
- bcm947xx_parts[4].name = NULL;
- bcm947xx_parts[2].size = size - bcm947xx_parts[2].offset -
- bcm947xx_parts[3].size;
- } else {
- /* legacy setup */
- /* calculate leftover flash, and assign it to the jffs2 partition */
- if (cfe_size != 384 * 1024) {
- bcm947xx_parts[4].offset = bcm947xx_parts[2].offset +
- bcm947xx_parts[2].size;
- if ((bcm947xx_parts[4].offset % mtd->erasesize) > 0) {
- bcm947xx_parts[4].offset += mtd->erasesize -
- (bcm947xx_parts[4].offset % mtd->erasesize);
- }
- bcm947xx_parts[4].size = bcm947xx_parts[3].offset -
- bcm947xx_parts[4].offset;
- } else {
- bcm947xx_parts[4].offset = bcm947xx_parts[2].offset +
- bcm947xx_parts[2].size;
- if ((bcm947xx_parts[4].offset % mtd->erasesize) > 0) {
- bcm947xx_parts[4].offset += mtd->erasesize -
- (bcm947xx_parts[4].offset % mtd->erasesize);
- }
- bcm947xx_parts[4].size = size - bcm947xx_parts[3].size -
- bcm947xx_parts[4].offset;
- }
- }
-
- return bcm947xx_parts;
-}
-
-#endif
-
-
-mod_init_t init_bcm947xx_map(void)
-{
- ulong flags;
- uint coreidx;
- chipcregs_t *cc;
- uint32 fltype;
- uint window_addr = 0, window_size = 0;
- size_t size;
- int ret = 0;
-#ifdef CONFIG_MTD_PARTITIONS
- struct mtd_partition *parts;
- int i;
-#endif
-
- spin_lock_irqsave(&sbh_lock, flags);
- coreidx = sb_coreidx(sbh);
-
- /* Check strapping option if chipcommon exists */
- if ((cc = sb_setcore(sbh, SB_CC, 0))) {
- fltype = readl(&cc->capabilities) & CC_CAP_FLASH_MASK;
- if (fltype == PFLASH) {
- bcm947xx_map.map_priv_2 = 1;
- window_addr = 0x1c000000;
- bcm947xx_map.size = window_size = 32 * 1024 * 1024;
- if ((readl(&cc->flash_config) & CC_CFG_DS) == 0)
- bcm947xx_map.buswidth = 1;
- }
- } else {
- fltype = PFLASH;
- bcm947xx_map.map_priv_2 = 0;
- window_addr = WINDOW_ADDR;
- window_size = WINDOW_SIZE;
- }
-
- sb_setcoreidx(sbh, coreidx);
- spin_unlock_irqrestore(&sbh_lock, flags);
-
- if (fltype != PFLASH) {
- printk(KERN_ERR "pflash: found no supported devices\n");
- ret = -ENODEV;
- goto fail;
- }
-
- bcm947xx_map.map_priv_1 = (unsigned long) ioremap(window_addr, window_size);
-
- if (!bcm947xx_map.map_priv_1) {
- printk(KERN_ERR "Failed to ioremap\n");
- return -EIO;
- }
-
- if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) {
- printk(KERN_ERR "pflash: cfi_probe failed\n");
- iounmap((void *)bcm947xx_map.map_priv_1);
- return -ENXIO;
- }
-
- bcm947xx_mtd->module = THIS_MODULE;
-
- size = bcm947xx_mtd->size;
-
- printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, window_addr);
-
-#ifdef CONFIG_MTD_PARTITIONS
- parts = init_mtd_partitions(bcm947xx_mtd, size);
- for (i = 0; parts[i].name; i++);
- ret = add_mtd_partitions(bcm947xx_mtd, parts, i);
- if (ret) {
- printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
- goto fail;
- }
-#endif
-
- return 0;
-
- fail:
- if (bcm947xx_mtd)
- map_destroy(bcm947xx_mtd);
- if (bcm947xx_map.map_priv_1)
- iounmap((void *) bcm947xx_map.map_priv_1);
- bcm947xx_map.map_priv_1 = 0;
- return ret;
-}
-
-mod_exit_t cleanup_bcm947xx_map(void)
-{
-#ifdef CONFIG_MTD_PARTITIONS
- del_mtd_partitions(bcm947xx_mtd);
-#endif
- map_destroy(bcm947xx_mtd);
- iounmap((void *) bcm947xx_map.map_priv_1);
- bcm947xx_map.map_priv_1 = 0;
-}
-
-module_init(init_bcm947xx_map);
-module_exit(cleanup_bcm947xx_map);
+++ /dev/null
-/* Low-level parallel port routines for the ASUS WL-500g built-in port
- *
- * Author: Nuno Grilo <nuno.grilo@netcabo.pt>
- * Based on parport_pc source
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/parport.h>
-#include <linux/parport_pc.h>
-
-#define SPLINK_ADDRESS 0xBF800010
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DPRINTK printk
-#else
-#define DPRINTK(stuff...)
-#endif
-
-
-/* __parport_splink_frob_control differs from parport_splink_frob_control in that
- * it doesn't do any extra masking. */
-static __inline__ unsigned char __parport_splink_frob_control (struct parport *p,
- unsigned char mask,
- unsigned char val)
-{
- struct parport_pc_private *priv = p->physport->private_data;
- unsigned char *io = (unsigned char *) p->base;
- unsigned char ctr = priv->ctr;
-#ifdef DEBUG_PARPORT
- printk (KERN_DEBUG
- "__parport_splink_frob_control(%02x,%02x): %02x -> %02x\n",
- mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
-#endif
- ctr = (ctr & ~mask) ^ val;
- ctr &= priv->ctr_writable; /* only write writable bits. */
- *(io+2) = ctr;
- priv->ctr = ctr; /* Update soft copy */
- return ctr;
-}
-
-
-
-static void parport_splink_data_forward (struct parport *p)
-{
- DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n");
- __parport_splink_frob_control (p, 0x20, 0);
-}
-
-static void parport_splink_data_reverse (struct parport *p)
-{
- DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n");
- __parport_splink_frob_control (p, 0x20, 0x20);
-}
-
-/*
-static void parport_splink_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- DPRINTK(KERN_DEBUG "parport_splink: IRQ handler called\n");
- parport_generic_irq(irq, (struct parport *) dev_id, regs);
-}
-*/
-
-static void parport_splink_enable_irq(struct parport *p)
-{
- DPRINTK(KERN_DEBUG "parport_splink: parport_splink_enable_irq called\n");
- __parport_splink_frob_control (p, 0x10, 0x10);
-}
-
-static void parport_splink_disable_irq(struct parport *p)
-{
- DPRINTK(KERN_DEBUG "parport_splink: parport_splink_disable_irq called\n");
- __parport_splink_frob_control (p, 0x10, 0);
-}
-
-static void parport_splink_init_state(struct pardevice *dev, struct parport_state *s)
-{
- DPRINTK(KERN_DEBUG "parport_splink: parport_splink_init_state called\n");
- s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
- if (dev->irq_func &&
- dev->port->irq != PARPORT_IRQ_NONE)
- /* Set ackIntEn */
- s->u.pc.ctr |= 0x10;
-}
-
-static void parport_splink_save_state(struct parport *p, struct parport_state *s)
-{
- const struct parport_pc_private *priv = p->physport->private_data;
- DPRINTK(KERN_DEBUG "parport_splink: parport_splink_save_state called\n");
- s->u.pc.ctr = priv->ctr;
-}
-
-static void parport_splink_restore_state(struct parport *p, struct parport_state *s)
-{
- struct parport_pc_private *priv = p->physport->private_data;
- unsigned char *io = (unsigned char *) p->base;
- unsigned char ctr = s->u.pc.ctr;
-
- DPRINTK(KERN_DEBUG "parport_splink: parport_splink_restore_state called\n");
- *(io+2) = ctr;
- priv->ctr = ctr;
-}
-
-static void parport_splink_setup_interrupt(void) {
- return;
-}
-
-static void parport_splink_write_data(struct parport *p, unsigned char d) {
- DPRINTK(KERN_DEBUG "parport_splink: write data called\n");
- unsigned char *io = (unsigned char *) p->base;
- *io = d;
-}
-
-static unsigned char parport_splink_read_data(struct parport *p) {
- DPRINTK(KERN_DEBUG "parport_splink: read data called\n");
- unsigned char *io = (unsigned char *) p->base;
- return *io;
-}
-
-static void parport_splink_write_control(struct parport *p, unsigned char d)
-{
- const unsigned char wm = (PARPORT_CONTROL_STROBE |
- PARPORT_CONTROL_AUTOFD |
- PARPORT_CONTROL_INIT |
- PARPORT_CONTROL_SELECT);
-
- DPRINTK(KERN_DEBUG "parport_splink: write control called\n");
- /* Take this out when drivers have adapted to the newer interface. */
- if (d & 0x20) {
- printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
- p->name, p->cad->name);
- parport_splink_data_reverse (p);
- }
-
- __parport_splink_frob_control (p, wm, d & wm);
-}
-
-static unsigned char parport_splink_read_control(struct parport *p)
-{
- const unsigned char wm = (PARPORT_CONTROL_STROBE |
- PARPORT_CONTROL_AUTOFD |
- PARPORT_CONTROL_INIT |
- PARPORT_CONTROL_SELECT);
- DPRINTK(KERN_DEBUG "parport_splink: read control called\n");
- const struct parport_pc_private *priv = p->physport->private_data;
- return priv->ctr & wm; /* Use soft copy */
-}
-
-static unsigned char parport_splink_frob_control (struct parport *p, unsigned char mask,
- unsigned char val)
-{
- const unsigned char wm = (PARPORT_CONTROL_STROBE |
- PARPORT_CONTROL_AUTOFD |
- PARPORT_CONTROL_INIT |
- PARPORT_CONTROL_SELECT);
-
- DPRINTK(KERN_DEBUG "parport_splink: frob control called\n");
- /* Take this out when drivers have adapted to the newer interface. */
- if (mask & 0x20) {
- printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
- p->name, p->cad->name,
- (val & 0x20) ? "reverse" : "forward");
- if (val & 0x20)
- parport_splink_data_reverse (p);
- else
- parport_splink_data_forward (p);
- }
-
- /* Restrict mask and val to control lines. */
- mask &= wm;
- val &= wm;
-
- return __parport_splink_frob_control (p, mask, val);
-}
-
-static unsigned char parport_splink_read_status(struct parport *p)
-{
- DPRINTK(KERN_DEBUG "parport_splink: read status called\n");
- unsigned char *io = (unsigned char *) p->base;
- return *(io+1);
-}
-
-static void parport_splink_inc_use_count(void)
-{
-#ifdef MODULE
- MOD_INC_USE_COUNT;
-#endif
-}
-
-static void parport_splink_dec_use_count(void)
-{
-#ifdef MODULE
- MOD_DEC_USE_COUNT;
-#endif
-}
-
-static struct parport_operations parport_splink_ops =
-{
- parport_splink_write_data,
- parport_splink_read_data,
-
- parport_splink_write_control,
- parport_splink_read_control,
- parport_splink_frob_control,
-
- parport_splink_read_status,
-
- parport_splink_enable_irq,
- parport_splink_disable_irq,
-
- parport_splink_data_forward,
- parport_splink_data_reverse,
-
- parport_splink_init_state,
- parport_splink_save_state,
- parport_splink_restore_state,
-
- parport_splink_inc_use_count,
- parport_splink_dec_use_count,
-
- parport_ieee1284_epp_write_data,
- parport_ieee1284_epp_read_data,
- parport_ieee1284_epp_write_addr,
- parport_ieee1284_epp_read_addr,
-
- parport_ieee1284_ecp_write_data,
- parport_ieee1284_ecp_read_data,
- parport_ieee1284_ecp_write_addr,
-
- parport_ieee1284_write_compat,
- parport_ieee1284_read_nibble,
- parport_ieee1284_read_byte,
-};
-
-/* --- Initialisation code -------------------------------- */
-
-static struct parport *parport_splink_probe_port (unsigned long int base)
-{
- struct parport_pc_private *priv;
- struct parport_operations *ops;
- struct parport *p;
-
- if (check_mem_region(base, 3)) {
- printk (KERN_DEBUG "parport (0x%lx): iomem region not available\n", base);
- return NULL;
- }
- priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
- if (!priv) {
- printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
- return NULL;
- }
- ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
- if (!ops) {
- printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
- base);
- kfree (priv);
- return NULL;
- }
- memcpy (ops, &parport_splink_ops, sizeof (struct parport_operations));
- priv->ctr = 0xc;
- priv->ctr_writable = 0xff;
-
- if (!(p = parport_register_port(base, PARPORT_IRQ_NONE,
- PARPORT_DMA_NONE, ops))) {
- printk (KERN_DEBUG "parport (0x%lx): registration failed!\n",
- base);
- kfree (priv);
- kfree (ops);
- return NULL;
- }
-
- p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
- p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
- p->private_data = priv;
-
- parport_proc_register(p);
- request_mem_region (p->base, 3, p->name);
-
- /* Done probing. Now put the port into a sensible start-up state. */
- parport_splink_write_data(p, 0);
- parport_splink_data_forward (p);
-
- /* Now that we've told the sharing engine about the port, and
- found out its characteristics, let the high-level drivers
- know about it. */
- parport_announce_port (p);
-
- DPRINTK(KERN_DEBUG "parport (0x%lx): init ok!\n",
- base);
- return p;
-}
-
-static void parport_splink_unregister_port(struct parport *p) {
- struct parport_pc_private *priv = p->private_data;
- struct parport_operations *ops = p->ops;
-
- if (p->irq != PARPORT_IRQ_NONE)
- free_irq(p->irq, p);
- release_mem_region(p->base, 3);
- parport_proc_unregister(p);
- kfree (priv);
- parport_unregister_port(p);
- kfree (ops);
-}
-
-
-int parport_splink_init(void)
-{
- int ret;
-
- DPRINTK(KERN_DEBUG "parport_splink init called\n");
- parport_splink_setup_interrupt();
- ret = !parport_splink_probe_port(SPLINK_ADDRESS);
-
- return ret;
-}
-
-void parport_splink_cleanup(void) {
- struct parport *p = parport_enumerate(), *tmp;
- DPRINTK(KERN_DEBUG "parport_splink cleanup called\n");
- if (p->size) {
- if (p->modes & PARPORT_MODE_PCSPP) {
- while(p) {
- tmp = p->next;
- parport_splink_unregister_port(p);
- p = tmp;
- }
- }
- }
-}
-
-MODULE_AUTHOR("Nuno Grilo <nuno.grilo@netcabo.pt>");
-MODULE_DESCRIPTION("Parport Driver for ASUS WL-500g router builtin Port");
-MODULE_SUPPORTED_DEVICE("ASUS WL-500g builtin Parallel Port");
-MODULE_LICENSE("GPL");
-
-module_init(parport_splink_init)
-module_exit(parport_splink_cleanup)
-
+++ /dev/null
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-define Build/Clean
- $(MAKE) -C lzma-loader clean
-endef
-
-define Image/Prepare
- cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
- rm -f $(KDIR)/loader.gz
- $(MAKE) -C lzma-loader \
- BUILD_DIR="$(KDIR)" \
- TARGET="$(KDIR)" \
- clean install
- echo -ne "\\x00" >> $(KDIR)/loader.gz
- rm -f $(KDIR)/fs_mark
- touch $(KDIR)/fs_mark
- $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
-endef
-
-ifneq ($(KERNEL),2.4)
- define Image/Build/wgt634u
- dd if=$(KDIR)/loader.elf of=$(BIN_DIR)/openwrt-wgt634u-$(2).bin bs=131072 conv=sync
- cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx >> $(BIN_DIR)/openwrt-wgt634u-$(2).bin
- endef
-endif
-
-define Image/Build/CyberTAN
- $(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
-endef
-define Image/Build/CyberTAN2
- $(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/openwrt-$(2)-$(5)-sysupgrade.bin -o $(BIN_DIR)/openwrt-$(2)-$(5)-factory.bin $(if $(6),-s $(6))
-endef
-define Image/Build/CyberTANHead
- $(STAGING_DIR_HOST)/bin/addpattern -5 -p $(3) -v v$(4) -i /dev/null -o $(KDIR)/openwrt-$(2)-header.bin $(if $(6),-s $(6))
-endef
-
-define Image/Build/Motorola
- $(STAGING_DIR_HOST)/bin/motorola-bin -$(3) $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(4).bin
-endef
-
-define Image/Build/USR
- $(STAGING_DIR_HOST)/bin/trx2usr $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin
-endef
-
-define trxalign/jffs2-128k
--a 0x20000 -f $(KDIR)/root.$(1)
-endef
-define trxalign/jffs2-64k
--a 0x10000 -f $(KDIR)/root.$(1)
-endef
-define trxalign/squashfs
--a 1024 -f $(KDIR)/root.$(1) $(if $(2),-f $(2)) -a 0x10000 -A $(KDIR)/fs_mark
-endef
-
-define Image/Build/trxV2
- $(call Image/Build/CyberTANHead,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
- $(STAGING_DIR_HOST)/bin/trx -2 -o $(BIN_DIR)/openwrt-$(2)-$(5)-sysupgrade.bin \
- -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
- $(call trxalign/$(1),$(1),$(KDIR)/openwrt-$(2)-header.bin)
- $(call Image/Build/CyberTAN2,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
-endef
-
-define Image/Build/jffs2-128k
- $(call Image/Build/CyberTAN,$(1),wrt54gs,W54S,4.80.1,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/CyberTAN,$(1),wrtsl54gs,W54U,2.08.1,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/trxV2,$(1),wrt54g3gv2-vf,3G2V,3.00.24,$(patsubst jffs2-%,jffs2,$(1)),6)
- ifeq ($(KERNEL),2.6)
- $(call Image/Build/wgt634u,$(1),$(patsubst jffs2-%,jffs2,$(1)))
- endif
-endef
-
-define Image/Build/jffs2-64k
- $(call Image/Build/CyberTAN,$(1),wrt54g3g,W54F,2.20.1,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/CyberTAN,$(1),wrt54g3g-em,W3GN,2.20.1,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/CyberTAN,$(1),wrt54g,W54G,4.71.1,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/CyberTAN,$(1),wrt54gs_v4,W54s,1.09.1,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/CyberTAN,$(1),wrt150n,N150,1.51.3,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/CyberTAN,$(1),wrt300n_v1,EWCB,1.03.6,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/CyberTAN,$(1),wrt300n_v11,EWC2,1.51.2,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/CyberTAN,$(1),wrt350n_v1,EWCG,1.04.1,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/Motorola,$(1),wa840g,2,$(patsubst jffs2-%,jffs2,$(1)))
- $(call Image/Build/Motorola,$(1),we800g,3,$(patsubst jffs2-%,jffs2,$(1)))
-endef
-
-define Image/Build/squashfs
- $(call Image/Build/jffs2-64k,$(1))
- $(call Image/Build/jffs2-128k,$(1))
-endef
-
-define Image/Build/Initramfs
- $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs.trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma
-endef
-
-define Image/Build
- $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx \
- -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
- $(call trxalign/$(1),$(1))
- $(call Image/Build/$(1),$(1))
- $(call Image/Build/Motorola,$(1),wr850g,1,$(1))
- $(call Image/Build/USR,$(1),usr5461,$(1))
-endef
-
-$(eval $(call BuildImage))
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME := lzma-loader
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-$(PKG_BUILD_DIR)/.prepared:
- mkdir $(PKG_BUILD_DIR)
- $(CP) ./src/* $(PKG_BUILD_DIR)/
- touch $@
-
-$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared
- $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \
- LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)"
-
-download:
-prepare: $(PKG_BUILD_DIR)/.prepared
-compile: $(PKG_BUILD_DIR)/loader.gz
-install:
-
-ifneq ($(TARGET),)
-install: compile
- $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/
-endif
-
-clean:
- rm -rf $(PKG_BUILD_DIR)
+++ /dev/null
-/*
- LzmaDecode.c
- LZMA Decoder
-
- LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this code, expressly permits you to
- statically or dynamically link your code (or bind by name) to the
- interfaces of this file without subjecting your linked code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#ifndef Byte
-#define Byte unsigned char
-#endif
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-typedef struct _CRangeDecoder
-{
- Byte *Buffer;
- Byte *BufferLim;
- UInt32 Range;
- UInt32 Code;
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *InCallback;
- int Result;
- #endif
- int ExtraBytes;
-} CRangeDecoder;
-
-Byte RangeDecoderReadByte(CRangeDecoder *rd)
-{
- if (rd->Buffer == rd->BufferLim)
- {
- #ifdef _LZMA_IN_CB
- UInt32 size;
- rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
- rd->BufferLim = rd->Buffer + size;
- if (size == 0)
- #endif
- {
- rd->ExtraBytes = 1;
- return 0xFF;
- }
- }
- return (*rd->Buffer++);
-}
-
-/* #define ReadByte (*rd->Buffer++) */
-#define ReadByte (RangeDecoderReadByte(rd))
-
-void RangeDecoderInit(CRangeDecoder *rd,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback
- #else
- Byte *stream, UInt32 bufferSize
- #endif
- )
-{
- int i;
- #ifdef _LZMA_IN_CB
- rd->InCallback = inCallback;
- rd->Buffer = rd->BufferLim = 0;
- #else
- rd->Buffer = stream;
- rd->BufferLim = stream + bufferSize;
- #endif
- rd->ExtraBytes = 0;
- rd->Code = 0;
- rd->Range = (0xFFFFFFFF);
- for(i = 0; i < 5; i++)
- rd->Code = (rd->Code << 8) | ReadByte;
-}
-
-#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;
-#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
-#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
-
-UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
-{
- RC_INIT_VAR
- UInt32 result = 0;
- int i;
- for (i = numTotalBits; i > 0; i--)
- {
- /* UInt32 t; */
- range >>= 1;
-
- result <<= 1;
- if (code >= range)
- {
- code -= range;
- result |= 1;
- }
- /*
- t = (code - range) >> 31;
- t &= 1;
- code -= range & (t - 1);
- result = (result + result) | (1 - t);
- */
- RC_NORMALIZE
- }
- RC_FLUSH_VAR
- return result;
-}
-
-int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
-{
- UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
- if (rd->Code < bound)
- {
- rd->Range = bound;
- *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
- if (rd->Range < kTopValue)
- {
- rd->Code = (rd->Code << 8) | ReadByte;
- rd->Range <<= 8;
- }
- return 0;
- }
- else
- {
- rd->Range -= bound;
- rd->Code -= bound;
- *prob -= (*prob) >> kNumMoveBits;
- if (rd->Range < kTopValue)
- {
- rd->Code = (rd->Code << 8) | ReadByte;
- rd->Range <<= 8;
- }
- return 1;
- }
-}
-
-#define RC_GET_BIT2(prob, mi, A0, A1) \
- UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
- if (code < bound) \
- { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
- else \
- { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
- RC_NORMALIZE
-
-#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)
-
-int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-{
- int mi = 1;
- int i;
- #ifdef _LZMA_LOC_OPT
- RC_INIT_VAR
- #endif
- for(i = numLevels; i > 0; i--)
- {
- #ifdef _LZMA_LOC_OPT
- CProb *prob = probs + mi;
- RC_GET_BIT(prob, mi)
- #else
- mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
- #endif
- }
- #ifdef _LZMA_LOC_OPT
- RC_FLUSH_VAR
- #endif
- return mi - (1 << numLevels);
-}
-
-int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
-{
- int mi = 1;
- int i;
- int symbol = 0;
- #ifdef _LZMA_LOC_OPT
- RC_INIT_VAR
- #endif
- for(i = 0; i < numLevels; i++)
- {
- #ifdef _LZMA_LOC_OPT
- CProb *prob = probs + mi;
- RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
- #else
- int bit = RangeDecoderBitDecode(probs + mi, rd);
- mi = mi + mi + bit;
- symbol |= (bit << i);
- #endif
- }
- #ifdef _LZMA_LOC_OPT
- RC_FLUSH_VAR
- #endif
- return symbol;
-}
-
-Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
-{
- int symbol = 1;
- #ifdef _LZMA_LOC_OPT
- RC_INIT_VAR
- #endif
- do
- {
- #ifdef _LZMA_LOC_OPT
- CProb *prob = probs + symbol;
- RC_GET_BIT(prob, symbol)
- #else
- symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
- #endif
- }
- while (symbol < 0x100);
- #ifdef _LZMA_LOC_OPT
- RC_FLUSH_VAR
- #endif
- return symbol;
-}
-
-Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
-{
- int symbol = 1;
- #ifdef _LZMA_LOC_OPT
- RC_INIT_VAR
- #endif
- do
- {
- int bit;
- int matchBit = (matchByte >> 7) & 1;
- matchByte <<= 1;
- #ifdef _LZMA_LOC_OPT
- {
- CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
- RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
- }
- #else
- bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
- symbol = (symbol << 1) | bit;
- #endif
- if (matchBit != bit)
- {
- while (symbol < 0x100)
- {
- #ifdef _LZMA_LOC_OPT
- CProb *prob = probs + symbol;
- RC_GET_BIT(prob, symbol)
- #else
- symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
- #endif
- }
- break;
- }
- }
- while (symbol < 0x100);
- #ifdef _LZMA_LOC_OPT
- RC_FLUSH_VAR
- #endif
- return symbol;
-}
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-
-int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
-{
- if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
- return RangeDecoderBitTreeDecode(p + LenLow +
- (posState << kLenNumLowBits), kLenNumLowBits, rd);
- if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
- return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
- (posState << kLenNumMidBits), kLenNumMidBits, rd);
- return kLenNumLowSymbols + kLenNumMidSymbols +
- RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
-}
-
-#define kNumStates 12
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-#ifdef _LZMA_OUT_READ
-
-typedef struct _LzmaVarState
-{
- CRangeDecoder RangeDecoder;
- Byte *Dictionary;
- UInt32 DictionarySize;
- UInt32 DictionaryPos;
- UInt32 GlobalPos;
- UInt32 Reps[4];
- int lc;
- int lp;
- int pb;
- int State;
- int PreviousIsMatch;
- int RemainLen;
-} LzmaVarState;
-
-int LzmaDecoderInit(
- unsigned char *buffer, UInt32 bufferSize,
- int lc, int lp, int pb,
- unsigned char *dictionary, UInt32 dictionarySize,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback
- #else
- unsigned char *inStream, UInt32 inSize
- #endif
- )
-{
- LzmaVarState *vs = (LzmaVarState *)buffer;
- CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
- UInt32 i;
- if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
- return LZMA_RESULT_NOT_ENOUGH_MEM;
- vs->Dictionary = dictionary;
- vs->DictionarySize = dictionarySize;
- vs->DictionaryPos = 0;
- vs->GlobalPos = 0;
- vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
- vs->lc = lc;
- vs->lp = lp;
- vs->pb = pb;
- vs->State = 0;
- vs->PreviousIsMatch = 0;
- vs->RemainLen = 0;
- dictionary[dictionarySize - 1] = 0;
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- RangeDecoderInit(&vs->RangeDecoder,
- #ifdef _LZMA_IN_CB
- inCallback
- #else
- inStream, inSize
- #endif
- );
- return LZMA_RESULT_OK;
-}
-
-int LzmaDecode(unsigned char *buffer,
- unsigned char *outStream, UInt32 outSize,
- UInt32 *outSizeProcessed)
-{
- LzmaVarState *vs = (LzmaVarState *)buffer;
- CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
- CRangeDecoder rd = vs->RangeDecoder;
- int state = vs->State;
- int previousIsMatch = vs->PreviousIsMatch;
- Byte previousByte;
- UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
- UInt32 nowPos = 0;
- UInt32 posStateMask = (1 << (vs->pb)) - 1;
- UInt32 literalPosMask = (1 << (vs->lp)) - 1;
- int lc = vs->lc;
- int len = vs->RemainLen;
- UInt32 globalPos = vs->GlobalPos;
-
- Byte *dictionary = vs->Dictionary;
- UInt32 dictionarySize = vs->DictionarySize;
- UInt32 dictionaryPos = vs->DictionaryPos;
-
- if (len == -1)
- {
- *outSizeProcessed = 0;
- return LZMA_RESULT_OK;
- }
-
- while(len > 0 && nowPos < outSize)
- {
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- len--;
- }
- if (dictionaryPos == 0)
- previousByte = dictionary[dictionarySize - 1];
- else
- previousByte = dictionary[dictionaryPos - 1];
-#else
-
-int LzmaDecode(
- Byte *buffer, UInt32 bufferSize,
- int lc, int lp, int pb,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback,
- #else
- unsigned char *inStream, UInt32 inSize,
- #endif
- unsigned char *outStream, UInt32 outSize,
- UInt32 *outSizeProcessed)
-{
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
- CProb *p = (CProb *)buffer;
- CRangeDecoder rd;
- UInt32 i;
- int state = 0;
- int previousIsMatch = 0;
- Byte previousByte = 0;
- UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
- UInt32 nowPos = 0;
- UInt32 posStateMask = (1 << pb) - 1;
- UInt32 literalPosMask = (1 << lp) - 1;
- int len = 0;
- if (bufferSize < numProbs * sizeof(CProb))
- return LZMA_RESULT_NOT_ENOUGH_MEM;
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- RangeDecoderInit(&rd,
- #ifdef _LZMA_IN_CB
- inCallback
- #else
- inStream, inSize
- #endif
- );
-#endif
-
- *outSizeProcessed = 0;
- while(nowPos < outSize)
- {
- int posState = (int)(
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & posStateMask);
- #ifdef _LZMA_IN_CB
- if (rd.Result != LZMA_RESULT_OK)
- return rd.Result;
- #endif
- if (rd.ExtraBytes != 0)
- return LZMA_RESULT_DATA_ERROR;
- if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
- {
- CProb *probs = p + Literal + (LZMA_LIT_SIZE *
- (((
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
- if (state < 4) state = 0;
- else if (state < 10) state -= 3;
- else state -= 6;
- if (previousIsMatch)
- {
- Byte matchByte;
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- matchByte = dictionary[pos];
- #else
- matchByte = outStream[nowPos - rep0];
- #endif
- previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
- previousIsMatch = 0;
- }
- else
- previousByte = LzmaLiteralDecode(probs, &rd);
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #endif
- }
- else
- {
- previousIsMatch = 1;
- if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
- {
- if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
- {
- if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos;
- #endif
- if (
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- == 0)
- return LZMA_RESULT_DATA_ERROR;
- state = state < 7 ? 9 : 11;
- #ifdef _LZMA_OUT_READ
- pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- outStream[nowPos++] = previousByte;
- continue;
- }
- }
- else
- {
- UInt32 distance;
- if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
- distance = rep1;
- else
- {
- if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
- distance = rep2;
- else
- {
- distance = rep3;
- rep3 = rep2;
- }
- rep2 = rep1;
- }
- rep1 = rep0;
- rep0 = distance;
- }
- len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
- state = state < 7 ? 8 : 11;
- }
- else
- {
- int posSlot;
- rep3 = rep2;
- rep2 = rep1;
- rep1 = rep0;
- state = state < 7 ? 7 : 10;
- len = LzmaLenDecode(p + LenCoder, &rd, posState);
- posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
- ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
- kNumPosSlotBits), kNumPosSlotBits, &rd);
- if (posSlot >= kStartPosModelIndex)
- {
- int numDirectBits = ((posSlot >> 1) - 1);
- rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
- if (posSlot < kEndPosModelIndex)
- {
- rep0 += RangeDecoderReverseBitTreeDecode(
- p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
- }
- else
- {
- rep0 += RangeDecoderDecodeDirectBits(&rd,
- numDirectBits - kNumAlignBits) << kNumAlignBits;
- rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
- }
- }
- else
- rep0 = posSlot;
- rep0++;
- }
- if (rep0 == (UInt32)(0))
- {
- /* it's for stream version */
- len = -1;
- break;
- }
- if (rep0 > nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- {
- return LZMA_RESULT_DATA_ERROR;
- }
- len += kMatchMinLen;
- do
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- outStream[nowPos++] = previousByte;
- len--;
- }
- while(len > 0 && nowPos < outSize);
- }
- }
-
- #ifdef _LZMA_OUT_READ
- vs->RangeDecoder = rd;
- vs->DictionaryPos = dictionaryPos;
- vs->GlobalPos = globalPos + nowPos;
- vs->Reps[0] = rep0;
- vs->Reps[1] = rep1;
- vs->Reps[2] = rep2;
- vs->Reps[3] = rep3;
- vs->State = state;
- vs->PreviousIsMatch = previousIsMatch;
- vs->RemainLen = len;
- #endif
-
- *outSizeProcessed = nowPos;
- return LZMA_RESULT_OK;
-}
+++ /dev/null
-/*
- LzmaDecode.h
- LZMA Decoder interface
-
- LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this code, expressly permits you to
- statically or dynamically link your code (or bind by name) to the
- interfaces of this file without subjecting your linked code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs,
- but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifndef UInt32
-#ifdef _LZMA_UINT32_IS_ULONG
-#define UInt32 unsigned long
-#else
-#define UInt32 unsigned int
-#endif
-#endif
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb unsigned short
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-#define LZMA_RESULT_NOT_ENOUGH_MEM 2
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
- int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-/*
-bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
-bufferSize += 100 in case of _LZMA_OUT_READ
-by default CProb is unsigned short,
-but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
-*/
-
-#ifdef _LZMA_OUT_READ
-int LzmaDecoderInit(
- unsigned char *buffer, UInt32 bufferSize,
- int lc, int lp, int pb,
- unsigned char *dictionary, UInt32 dictionarySize,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback
- #else
- unsigned char *inStream, UInt32 inSize
- #endif
-);
-#endif
-
-int LzmaDecode(
- unsigned char *buffer,
- #ifndef _LZMA_OUT_READ
- UInt32 bufferSize,
- int lc, int lp, int pb,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback,
- #else
- unsigned char *inStream, UInt32 inSize,
- #endif
- #endif
- unsigned char *outStream, UInt32 outSize,
- UInt32 *outSizeProcessed);
-
-#endif
+++ /dev/null
-#
-# Makefile for Broadcom BCM947XX boards
-#
-# Copyright 2001-2003, Broadcom Corporation
-# All Rights Reserved.
-#
-# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-#
-# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org>
-# Modified to support bzip'd kernels.
-# Of course, it would be better to integrate bunzip capability into CFE.
-#
-# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su>
-# Cleaned up, modified for lzma support, removed from kernel
-#
-
-TEXT_START := 0x80001000
-BZ_TEXT_START := 0x80400000
-
-OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
-
-CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
- -ffunction-sections -pipe -mlong-calls -fno-common \
- -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
-CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB
-
-ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START)
-
-SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/
-
-OBJECTS := head.o data.o
-
-all: loader.gz loader.elf
-
-# Don't build dependencies, this may die if $(CC) isn't gcc
-dep:
-
-install:
-
-loader.gz: loader
- gzip -nc9 $< > $@
-
-loader.elf: loader.o
- cp $< $@
-
-loader: loader.o
- $(OBJCOPY) $< $@
-
-loader.o: loader.lds $(OBJECTS)
- $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS)
-
-loader.lds: loader.lds.in Makefile
- @sed "$(SEDFLAGS)" < $< > $@
-
-data.o: data.lds decompress.image
- $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips
-
-data.lds:
- @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@
-
-decompress.image: decompress
- $(OBJCOPY) $< $@
-
-decompress: decompress.lds decompress.o LzmaDecode.o
- $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o
-
-decompress.lds: decompress.lds.in Makefile
- @sed "$(SEDFLAGS)" < $< > $@
-
-mrproper: clean
-
-clean:
- rm -f loader.gz loader decompress *.lds *.o *.image
+++ /dev/null
-/*
- * LZMA compressed kernel decompressor for bcm947xx boards
- *
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-The code is intended to decompress kernel, being compressed using lzma utility
-build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
-
-decompressor code expects that your .trx file consist of three partitions:
-
-1) decompressor itself (this is gziped code which pmon/cfe will extract and run
-on boot-up instead of real kernel)
-2) LZMA compressed kernel (both streamed and regular modes are supported now)
-3) Root filesystem
-
-Please be sure to apply the following patch for use this new trx layout (it will
-allow using both new and old trx files for root filesystem lookup code)
-
---- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300
-+++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300
-@@ -221,7 +221,9 @@
- /* Try looking at TRX header for rootfs offset */
- if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
- bcm947xx_parts[1].offset = off;
-- if (le32_to_cpu(trx->offsets[1]) > off)
-+ if (le32_to_cpu(trx->offsets[2]) > off)
-+ off = le32_to_cpu(trx->offsets[2]);
-+ else if (le32_to_cpu(trx->offsets[1]) > off)
- off = le32_to_cpu(trx->offsets[1]);
- continue;
- }
-
-
-Revision history:
- 0.02 Initial release
- 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
- output size to decoder (stream mode compressed input is not
- a requirement anymore)
- 0.04 Reordered functions using lds script
+++ /dev/null
-/*
- * LZMA compressed kernel decompressor for bcm947xx boards
- *
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * Please note, this was code based on the bunzip2 decompressor code
- * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left
- * is an idea and part of original vendor code
- *
- *
- * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com>
- * pass actual output size to decoder (stream mode
- * compressed input is not a requirement anymore)
- *
- * 24-Apr-2005 Oleg I. Vdovikin
- * reordered functions using lds script, removed forward decl
- *
- */
-
-#include "LzmaDecode.h"
-
-#define BCM4710_FLASH 0x1fc00000 /* Flash */
-
-#define KSEG0 0x80000000
-#define KSEG1 0xa0000000
-
-#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
-
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-
-#define cache_unroll(base,op) \
- __asm__ __volatile__( \
- ".set noreorder;\n" \
- ".set mips3;\n" \
- "cache %1, (%0);\n" \
- ".set mips0;\n" \
- ".set reorder\n" \
- : \
- : "r" (base), \
- "i" (op));
-
-static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
-{
- unsigned long start = KSEG0;
- unsigned long end = (start + size);
-
- while(start < end) {
- cache_unroll(start,Index_Invalidate_I);
- start += lsize;
- }
-}
-
-static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
-{
- unsigned long start = KSEG0;
- unsigned long end = (start + size);
-
- while(start < end) {
- cache_unroll(start,Index_Writeback_Inv_D);
- start += lsize;
- }
-}
-
-#define TRX_MAGIC 0x30524448 /* "HDR0" */
-
-struct trx_header {
- unsigned int magic; /* "HDR0" */
- unsigned int len; /* Length of file including header */
- unsigned int crc32; /* 32-bit CRC from flag_version to end of file */
- unsigned int flag_version; /* 0:15 flags, 16:31 version */
- unsigned int offsets[3]; /* Offsets of partitions from start of header */
-};
-
-/* beyound the image end, size not known in advance */
-extern unsigned char workspace[];
-
-unsigned int offset;
-unsigned char *data;
-
-/* flash access should be aligned, so wrapper is used */
-/* read byte from the flash, all accesses are 32-bit aligned */
-static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
-{
- static unsigned int val;
-
- if (((unsigned int)offset % 4) == 0) {
- val = *(unsigned int *)data;
- data += 4;
- }
-
- *bufferSize = 1;
- *buffer = ((unsigned char *)&val) + (offset++ & 3);
-
- return LZMA_RESULT_OK;
-}
-
-static __inline__ unsigned char get_byte(void)
-{
- unsigned char *buffer;
- UInt32 fake;
-
- return read_byte(0, &buffer, &fake), *buffer;
-}
-
-/* should be the first function */
-void entry(unsigned long icache_size, unsigned long icache_lsize,
- unsigned long dcache_size, unsigned long dcache_lsize,
- unsigned long fw_arg0, unsigned long fw_arg1,
- unsigned long fw_arg2, unsigned long fw_arg3)
-{
- unsigned int i; /* temp value */
- unsigned int lc; /* literal context bits */
- unsigned int lp; /* literal pos state bits */
- unsigned int pb; /* pos state bits */
- unsigned int osize; /* uncompressed size */
-
- ILzmaInCallback callback;
- callback.Read = read_byte;
-
- /* look for trx header, 32-bit data access */
- for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH));
- ((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536);
-
- /* compressed kernel is in the partition 0 or 1 */
- if (((struct trx_header *)data)->offsets[1] > 65536)
- data += ((struct trx_header *)data)->offsets[0];
- else
- data += ((struct trx_header *)data)->offsets[1];
-
- offset = 0;
-
- /* lzma args */
- i = get_byte();
- lc = i % 9, i = i / 9;
- lp = i % 5, pb = i / 5;
-
- /* skip rest of the LZMA coder property */
- for (i = 0; i < 4; i++)
- get_byte();
-
- /* read the lower half of uncompressed size in the header */
- osize = ((unsigned int)get_byte()) +
- ((unsigned int)get_byte() << 8) +
- ((unsigned int)get_byte() << 16) +
- ((unsigned int)get_byte() << 24);
-
- /* skip rest of the header (upper half of uncompressed size) */
- for (i = 0; i < 4; i++)
- get_byte();
-
- /* decompress kernel */
- if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback,
- (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK)
- {
- blast_dcache(dcache_size, dcache_lsize);
- blast_icache(icache_size, icache_lsize);
-
- /* Jump to load address */
- ((void (*)(unsigned long, unsigned long, unsigned long,
- unsigned long)) LOADADDR)(fw_arg0, fw_arg1, fw_arg2,
- fw_arg3);
- }
-}
+++ /dev/null
-OUTPUT_ARCH(mips)
-ENTRY(entry)
-SECTIONS {
- . = BZ_TEXT_START;
- .text : {
- *(.text.entry)
- *(.text)
- *(.rodata)
- }
-
- .data : {
- *(.data)
- }
-
- .bss : {
- *(.bss)
- }
-
- workspace = .;
-}
+++ /dev/null
-/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */
-/* cache manipulation adapted from Broadcom code */
-/* idea taken from original bunzip2 decompressor code */
-/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */
-/* Licensed under the linux kernel's version of the GPL.*/
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-
-#define KSEG0 0x80000000
-
-#define C0_CONFIG $16
-#define C0_TAGLO $28
-#define C0_TAGHI $29
-
-#define CONF1_DA_SHIFT 7 /* D$ associativity */
-#define CONF1_DA_MASK 0x00000380
-#define CONF1_DA_BASE 1
-#define CONF1_DL_SHIFT 10 /* D$ line size */
-#define CONF1_DL_MASK 0x00001c00
-#define CONF1_DL_BASE 2
-#define CONF1_DS_SHIFT 13 /* D$ sets/way */
-#define CONF1_DS_MASK 0x0000e000
-#define CONF1_DS_BASE 64
-#define CONF1_IA_SHIFT 16 /* I$ associativity */
-#define CONF1_IA_MASK 0x00070000
-#define CONF1_IA_BASE 1
-#define CONF1_IL_SHIFT 19 /* I$ line size */
-#define CONF1_IL_MASK 0x00380000
-#define CONF1_IL_BASE 2
-#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
-#define CONF1_IS_MASK 0x01c00000
-#define CONF1_IS_BASE 64
-
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-
- .text
- LEAF(startup)
- .set noreorder
- addi sp, -48
- sw a0, 16(sp)
- sw a1, 20(sp)
- sw a2, 24(sp)
- sw a3, 28(sp)
-
- /* Copy decompressor code to the right place */
- li t2, BZ_TEXT_START
- add a0, t2, 0
- la a1, code_start
- la a2, code_stop
-$L1:
- lw t0, 0(a1)
- sw t0, 0(a0)
- add a1, 4
- add a0, 4
- blt a1, a2, $L1
- nop
-
- /* At this point we need to invalidate dcache and */
- /* icache before jumping to new code */
-
-1: /* Get cache sizes */
- .set mips32
- mfc0 s0,C0_CONFIG,1
- .set mips0
-
- li s1,CONF1_DL_MASK
- and s1,s0
- beq s1,zero,nodc
- nop
-
- srl s1,CONF1_DL_SHIFT
- li t0,CONF1_DL_BASE
- sll s1,t0,s1 /* s1 has D$ cache line size */
-
- li s2,CONF1_DA_MASK
- and s2,s0
- srl s2,CONF1_DA_SHIFT
- addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */
-
- li t0,CONF1_DS_MASK
- and t0,s0
- srl t0,CONF1_DS_SHIFT
- li s3,CONF1_DS_BASE
- sll s3,s3,t0 /* s3 has D$ sets per way */
-
- multu s2,s3 /* sets/way * associativity */
- mflo t0 /* total cache lines */
-
- multu s1,t0 /* D$ linesize * lines */
- mflo s2 /* s2 is now D$ size in bytes */
-
- /* Initilize the D$: */
- mtc0 zero,C0_TAGLO
- mtc0 zero,C0_TAGHI
-
- li t0,KSEG0 /* Just an address for the first $ line */
- addu t1,t0,s2 /* + size of cache == end */
-
- .set mips3
-1: cache Index_Writeback_Inv_D,0(t0)
- .set mips0
- bne t0,t1,1b
- addu t0,s1
-
-nodc:
- /* Now we get to do it all again for the I$ */
-
- move s3,zero /* just in case there is no icache */
- move s4,zero
-
- li t0,CONF1_IL_MASK
- and t0,s0
- beq t0,zero,noic
- nop
-
- srl t0,CONF1_IL_SHIFT
- li s3,CONF1_IL_BASE
- sll s3,t0 /* s3 has I$ cache line size */
-
- li t0,CONF1_IA_MASK
- and t0,s0
- srl t0,CONF1_IA_SHIFT
- addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */
-
- li t0,CONF1_IS_MASK
- and t0,s0
- srl t0,CONF1_IS_SHIFT
- li s5,CONF1_IS_BASE
- sll s5,t0 /* s5 has I$ sets per way */
-
- multu s4,s5 /* sets/way * associativity */
- mflo t0 /* s4 is now total cache lines */
-
- multu s3,t0 /* I$ linesize * lines */
- mflo s4 /* s4 is cache size in bytes */
-
- /* Initilize the I$: */
- mtc0 zero,C0_TAGLO
- mtc0 zero,C0_TAGHI
-
- li t0,KSEG0 /* Just an address for the first $ line */
- addu t1,t0,s4 /* + size of cache == end */
-
- .set mips3
-1: cache Index_Invalidate_I,0(t0)
- .set mips0
- bne t0,t1,1b
- addu t0,s3
-
-noic:
- move a0,s3 /* icache line size */
- move a1,s4 /* icache size */
- move a2,s1 /* dcache line size */
- jal t2
- move a3,s2 /* dcache size */
-
- .set reorder
- END(startup)
+++ /dev/null
-OUTPUT_ARCH(mips)
-ENTRY(startup)
-SECTIONS {
- . = TEXT_START;
- .text : {
- *(.text)
- *(.rodata)
- }
-
- .data : {
- *(.data)
- }
-
- .bss : {
- *(.bss)
- }
-}
+++ /dev/null
---- a/arch/mips/config-shared.in
-+++ b/arch/mips/config-shared.in
-@@ -208,6 +208,14 @@ if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]
- fi
- define_bool CONFIG_MIPS_RTC y
- fi
-+dep_bool 'Support for Broadcom MIPS-based boards' CONFIG_MIPS_BRCM $CONFIG_EXPERIMENTAL
-+dep_bool 'Support for Broadcom BCM947XX' CONFIG_BCM947XX $CONFIG_MIPS_BRCM
-+if [ "$CONFIG_BCM947XX" = "y" ] ; then
-+ bool ' Support for Broadcom BCM4710' CONFIG_BCM4710
-+ bool ' Support for Broadcom BCM4310' CONFIG_BCM4310
-+ bool ' Support for Broadcom BCM4704' CONFIG_BCM4704
-+ bool ' Support for Broadcom BCM5365' CONFIG_BCM5365
-+fi
- bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI
- bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226
- bool 'Support for TANBAC TB0229 (VR4131DIMM)' CONFIG_TANBAC_TB0229
-@@ -229,6 +237,11 @@ define_bool CONFIG_RWSEM_GENERIC_SPINLOC
- define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
-
- #
-+# Provide an option for a default kernel command line
-+#
-+string 'Default kernel command string' CONFIG_CMDLINE ""
-+
-+#
- # Select some configuration options automatically based on user selections.
- #
- if [ "$CONFIG_ACER_PICA_61" = "y" ]; then
-@@ -554,6 +567,12 @@ if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]
- define_bool CONFIG_SWAP_IO_SPACE_L y
- define_bool CONFIG_BOOT_ELF32 y
- fi
-+if [ "$CONFIG_BCM947XX" = "y" ] ; then
-+ define_bool CONFIG_PCI y
-+ define_bool CONFIG_NONCOHERENT_IO y
-+ define_bool CONFIG_NEW_TIME_C y
-+ define_bool CONFIG_NEW_IRQ y
-+fi
- if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then
- define_bool CONFIG_ARC32 y
- define_bool CONFIG_ARC_MEMORY y
-@@ -1042,7 +1061,11 @@ comment 'Kernel hacking'
-
- bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
- bool 'Enable run-time debugging' CONFIG_RUNTIME_DEBUG
--bool 'Remote GDB kernel debugging' CONFIG_KGDB
-+if [ "$CONFIG_BCM947XX" = "y" ] ; then
-+ bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
-+else
-+ bool 'Remote GDB kernel debugging' CONFIG_KGDB
-+fi
- dep_bool ' Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_KGDB
- if [ "$CONFIG_KGDB" = "y" ]; then
- define_bool CONFIG_DEBUG_INFO y
---- a/arch/mips/kernel/cpu-probe.c
-+++ b/arch/mips/kernel/cpu-probe.c
-@@ -162,7 +162,7 @@ static inline int __cpu_has_fpu(void)
-
- static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
- {
-- switch (c->processor_id & 0xff00) {
-+ switch (c->processor_id & PRID_IMP_MASK) {
- case PRID_IMP_R2000:
- c->cputype = CPU_R2000;
- c->isa_level = MIPS_CPU_ISA_I;
-@@ -172,7 +172,7 @@ static inline void cpu_probe_legacy(stru
- c->tlbsize = 64;
- break;
- case PRID_IMP_R3000:
-- if ((c->processor_id & 0xff) == PRID_REV_R3000A)
-+ if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A)
- if (cpu_has_confreg())
- c->cputype = CPU_R3081E;
- else
-@@ -187,12 +187,12 @@ static inline void cpu_probe_legacy(stru
- break;
- case PRID_IMP_R4000:
- if (read_c0_config() & CONF_SC) {
-- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
-+ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400)
- c->cputype = CPU_R4400PC;
- else
- c->cputype = CPU_R4000PC;
- } else {
-- if ((c->processor_id & 0xff) >= PRID_REV_R4400)
-+ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400)
- c->cputype = CPU_R4400SC;
- else
- c->cputype = CPU_R4000SC;
-@@ -438,7 +438,7 @@ static inline void decode_config1(struct
- static inline void cpu_probe_mips(struct cpuinfo_mips *c)
- {
- decode_config1(c);
-- switch (c->processor_id & 0xff00) {
-+ switch (c->processor_id & PRID_IMP_MASK) {
- case PRID_IMP_4KC:
- c->cputype = CPU_4KC;
- c->isa_level = MIPS_CPU_ISA_M32;
-@@ -479,10 +479,10 @@ static inline void cpu_probe_alchemy(str
- {
- decode_config1(c);
- c->options |= MIPS_CPU_PREFETCH;
-- switch (c->processor_id & 0xff00) {
-+ switch (c->processor_id & PRID_IMP_MASK) {
- case PRID_IMP_AU1_REV1:
- case PRID_IMP_AU1_REV2:
-- switch ((c->processor_id >> 24) & 0xff) {
-+ switch ((c->processor_id >> 24) & PRID_REV_MASK) {
- case 0:
- c->cputype = CPU_AU1000;
- break;
-@@ -510,10 +510,34 @@ static inline void cpu_probe_alchemy(str
- }
- }
-
-+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
-+{
-+ decode_config1(c);
-+ c->options |= MIPS_CPU_PREFETCH;
-+ switch (c->processor_id & PRID_IMP_MASK) {
-+ case PRID_IMP_BCM4710:
-+ c->cputype = CPU_BCM4710;
-+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-+ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
-+ c->scache.flags = MIPS_CACHE_NOT_PRESENT;
-+ break;
-+ case PRID_IMP_4KC:
-+ case PRID_IMP_BCM3302:
-+ c->cputype = CPU_BCM3302;
-+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-+ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
-+ c->scache.flags = MIPS_CACHE_NOT_PRESENT;
-+ break;
-+ default:
-+ c->cputype = CPU_UNKNOWN;
-+ break;
-+ }
-+}
-+
- static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
- {
- decode_config1(c);
-- switch (c->processor_id & 0xff00) {
-+ switch (c->processor_id & PRID_IMP_MASK) {
- case PRID_IMP_SB1:
- c->cputype = CPU_SB1;
- c->isa_level = MIPS_CPU_ISA_M64;
-@@ -535,7 +559,7 @@ static inline void cpu_probe_sibyte(stru
- static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
- {
- decode_config1(c);
-- switch (c->processor_id & 0xff00) {
-+ switch (c->processor_id & PRID_IMP_MASK) {
- case PRID_IMP_SR71000:
- c->cputype = CPU_SR71000;
- c->isa_level = MIPS_CPU_ISA_M64;
-@@ -560,7 +584,7 @@ __init void cpu_probe(void)
- c->cputype = CPU_UNKNOWN;
-
- c->processor_id = read_c0_prid();
-- switch (c->processor_id & 0xff0000) {
-+ switch (c->processor_id & PRID_COMP_MASK) {
-
- case PRID_COMP_LEGACY:
- cpu_probe_legacy(c);
-@@ -571,6 +595,9 @@ __init void cpu_probe(void)
- case PRID_COMP_ALCHEMY:
- cpu_probe_alchemy(c);
- break;
-+ case PRID_COMP_BROADCOM:
-+ cpu_probe_broadcom(c);
-+ break;
- case PRID_COMP_SIBYTE:
- cpu_probe_sibyte(c);
- break;
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -28,12 +28,20 @@
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
-
-+#ifdef CONFIG_BCM4710
-+#undef eret
-+#define eret nop; nop; eret
-+#endif
-+
- .text
-+ j kernel_entry
-+ nop
-+
- /*
- * Reserved space for exception handlers.
- * Necessary for machines which link their kernels at KSEG0.
- */
-- .fill 0x400
-+ .fill 0x3f4
-
- /* The following two symbols are used for kernel profiling. */
- EXPORT(stext)
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -78,9 +78,10 @@ static const char *cpu_name[] = {
- [CPU_AU1550] "Au1550",
- [CPU_24K] "MIPS 24K",
- [CPU_AU1200] "Au1200",
-+ [CPU_BCM4710] "BCM4710",
-+ [CPU_BCM3302] "BCM3302",
- };
-
--
- static int show_cpuinfo(struct seq_file *m, void *v)
- {
- unsigned int version = current_cpu_data.processor_id;
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -493,6 +493,7 @@ void __init setup_arch(char **cmdline_p)
- void swarm_setup(void);
- void hp_setup(void);
- void au1x00_setup(void);
-+ void brcm_setup(void);
- void frame_info_init(void);
-
- frame_info_init();
-@@ -691,6 +692,11 @@ void __init setup_arch(char **cmdline_p)
- pmc_yosemite_setup();
- break;
- #endif
-+#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4310)
-+ case MACH_GROUP_BRCM:
-+ brcm_setup();
-+ break;
-+#endif
- default:
- panic("Unsupported architecture");
- }
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -920,6 +920,7 @@ void __init per_cpu_trap_init(void)
- void __init trap_init(void)
- {
- extern char except_vec1_generic;
-+ extern char except_vec2_generic;
- extern char except_vec3_generic, except_vec3_r4000;
- extern char except_vec_ejtag_debug;
- extern char except_vec4;
-@@ -927,6 +928,7 @@ void __init trap_init(void)
-
- /* Copy the generic exception handler code to it's final destination. */
- memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
-+ memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80);
-
- /*
- * Setup default vectors
-@@ -985,6 +987,12 @@ void __init trap_init(void)
- set_except_vector(13, handle_tr);
- set_except_vector(22, handle_mdmx);
-
-+ if (current_cpu_data.cputype == CPU_SB1) {
-+ /* Enable timer interrupt and scd mapped interrupt */
-+ clear_c0_status(0xf000);
-+ set_c0_status(0xc00);
-+ }
-+
- if (cpu_has_fpu && !cpu_has_nofpuex)
- set_except_vector(15, handle_fpe);
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -726,6 +726,19 @@ LOADADDR += 0x80020000
- endif
-
- #
-+# Broadcom BCM947XX variants
-+#
-+ifdef CONFIG_BCM947XX
-+LIBS += arch/mips/bcm947xx/generic/brcm.o arch/mips/bcm947xx/bcm947xx.o
-+SUBDIRS += arch/mips/bcm947xx/generic arch/mips/bcm947xx
-+LOADADDR := 0x80001000
-+
-+zImage: vmlinux
-+ $(MAKE) -C arch/$(ARCH)/bcm947xx/compressed
-+export LOADADDR
-+endif
-+
-+#
- # Choosing incompatible machines durings configuration will result in
- # error messages during linking. Select a default linkscript if
- # none has been choosen above.
-@@ -779,6 +792,7 @@ archclean:
- $(MAKE) -C arch/$(ARCH)/tools clean
- $(MAKE) -C arch/mips/baget clean
- $(MAKE) -C arch/mips/lasat clean
-+ $(MAKE) -C arch/mips/bcm947xx/compressed clean
-
- archmrproper:
- @$(MAKEBOOT) mrproper
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -1118,3 +1118,47 @@ void __init ld_mmu_r4xx0(void)
- build_clear_page();
- build_copy_page();
- }
-+
-+#ifdef CONFIG_BCM4704
-+static void __init mips32_icache_fill(unsigned long addr, uint nbytes)
-+{
-+ unsigned long ic_lsize = current_cpu_data.icache.linesz;
-+ int i;
-+ for (i = 0; i < nbytes; i += ic_lsize)
-+ fill_icache_line((addr + i));
-+}
-+
-+/*
-+ * This must be run from the cache on 4704A0
-+ * so there are no mips core BIU ops in progress
-+ * when the PFC is enabled.
-+ */
-+#define PFC_CR0 0xff400000 /* control reg 0 */
-+#define PFC_CR1 0xff400004 /* control reg 1 */
-+static void __init enable_pfc(u32 mode)
-+{
-+ /* write range */
-+ *(volatile u32 *)PFC_CR1 = 0xffff0000;
-+
-+ /* enable */
-+ *(volatile u32 *)PFC_CR0 = mode;
-+}
-+#endif
-+
-+
-+void check_enable_mips_pfc(int val)
-+{
-+
-+#ifdef CONFIG_BCM4704
-+ struct cpuinfo_mips *c = ¤t_cpu_data;
-+
-+ /* enable prefetch cache */
-+ if (((c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) == PRID_IMP_BCM3302)
-+ && (read_c0_diag() & (1 << 29))) {
-+ mips32_icache_fill((unsigned long) &enable_pfc, 64);
-+ enable_pfc(val);
-+ }
-+#endif
-+}
-+
-+
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -13,7 +13,9 @@ obj-$(CONFIG_MIPS_GT64120) += ops-gt6412
- obj-$(CONFIG_MIPS_MSC) += ops-msc.o
- obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
- obj-$(CONFIG_SNI_RM200_PCI) += ops-sni.o
-+ifndef CONFIG_BCM947XX
- obj-y += pci.o
-+endif
- obj-$(CONFIG_PCI_AUTO) += pci_auto.o
-
- include $(TOPDIR)/Rules.make
---- a/drivers/char/serial.c
-+++ b/drivers/char/serial.c
-@@ -444,6 +444,10 @@ static _INLINE_ unsigned int serial_in(s
- return inb(info->port+1);
- #endif
- case SERIAL_IO_MEM:
-+#ifdef CONFIG_BCM4310
-+ readb((unsigned long) info->iomem_base +
-+ (UART_SCR<<info->iomem_reg_shift));
-+#endif
- return readb((unsigned long) info->iomem_base +
- (offset<<info->iomem_reg_shift));
- default:
-@@ -464,6 +468,9 @@ static _INLINE_ void serial_out(struct a
- case SERIAL_IO_MEM:
- writeb(value, (unsigned long) info->iomem_base +
- (offset<<info->iomem_reg_shift));
-+#ifdef CONFIG_BCM4704
-+ *((volatile unsigned int *) KSEG1ADDR(0x18000000));
-+#endif
- break;
- default:
- outb(value, info->port+offset);
-@@ -1728,7 +1735,7 @@ static void change_speed(struct async_st
- /* Special case since 134 is really 134.5 */
- quot = (2*baud_base / 269);
- else if (baud)
-- quot = baud_base / baud;
-+ quot = (baud_base + (baud / 2)) / baud;
- }
- /* If the quotient is zero refuse the change */
- if (!quot && old_termios) {
-@@ -1745,12 +1752,12 @@ static void change_speed(struct async_st
- /* Special case since 134 is really 134.5 */
- quot = (2*baud_base / 269);
- else if (baud)
-- quot = baud_base / baud;
-+ quot = (baud_base + (baud / 2)) / baud;
- }
- }
- /* As a last resort, if the quotient is zero, default to 9600 bps */
- if (!quot)
-- quot = baud_base / 9600;
-+ quot = (baud_base + 4800) / 9600;
- /*
- * Work around a bug in the Oxford Semiconductor 952 rev B
- * chip which causes it to seriously miscalculate baud rates
-@@ -5994,6 +6001,13 @@ static int __init serial_console_setup(s
- * Divisor, bytesize and parity
- */
- state = rs_table + co->index;
-+ /*
-+ * Safe guard: state structure must have been initialized
-+ */
-+ if (state->iomem_base == NULL) {
-+ printk("!unable to setup serial console!\n");
-+ return -1;
-+ }
- if (doflow)
- state->flags |= ASYNC_CONS_FLOW;
- info = &async_sercons;
-@@ -6007,7 +6021,7 @@ static int __init serial_console_setup(s
- info->io_type = state->io_type;
- info->iomem_base = state->iomem_base;
- info->iomem_reg_shift = state->iomem_reg_shift;
-- quot = state->baud_base / baud;
-+ quot = (state->baud_base + (baud / 2)) / baud;
- cval = cflag & (CSIZE | CSTOPB);
- #if defined(__powerpc__) || defined(__alpha__)
- cval >>= 8;
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -3,6 +3,8 @@
- # Makefile for the Linux network (ethercard) device drivers.
- #
-
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
-+
- obj-y :=
- obj-m :=
- obj-n :=
---- a/drivers/parport/Config.in
-+++ b/drivers/parport/Config.in
-@@ -11,6 +11,7 @@ comment 'Parallel port support'
- tristate 'Parallel port support' CONFIG_PARPORT
- if [ "$CONFIG_PARPORT" != "n" ]; then
- dep_tristate ' PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT
-+ dep_tristate ' Asus WL500g parallel port' CONFIG_PARPORT_SPLINK $CONFIG_PARPORT
- if [ "$CONFIG_PARPORT_PC" != "n" -a "$CONFIG_SERIAL" != "n" ]; then
- if [ "$CONFIG_SERIAL" = "m" ]; then
- define_tristate CONFIG_PARPORT_PC_CML1 m
---- a/drivers/parport/Makefile
-+++ b/drivers/parport/Makefile
-@@ -22,6 +22,7 @@ endif
-
- obj-$(CONFIG_PARPORT) += parport.o
- obj-$(CONFIG_PARPORT_PC) += parport_pc.o
-+obj-$(CONFIG_PARPORT_SPLINK) += parport_splink.o
- obj-$(CONFIG_PARPORT_PC_PCMCIA) += parport_cs.o
- obj-$(CONFIG_PARPORT_AMIGA) += parport_amiga.o
- obj-$(CONFIG_PARPORT_MFC3) += parport_mfc3.o
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -37,6 +37,7 @@
- #define MACH_GROUP_HP_LJ 20 /* Hewlett Packard LaserJet */
- #define MACH_GROUP_LASAT 21
- #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */
-+#define MACH_GROUP_BRCM 23 /* Broadcom */
-
- /*
- * Valid machtype values for group unknown (low order halfword of mips_machtype)
-@@ -197,6 +198,15 @@
- #define MACH_TANBAC_TB0229 7 /* TANBAC TB0229 (VR4131DIMM) */
-
- /*
-+ * Valid machtypes for group Broadcom
-+ */
-+#define MACH_BCM93725 0
-+#define MACH_BCM93725_VJ 1
-+#define MACH_BCM93730 2
-+#define MACH_BCM947XX 3
-+#define MACH_BCM933XX 4
-+
-+/*
- * Valid machtype for group TITAN
- */
- #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */
---- a/include/asm-mips/cpu.h
-+++ b/include/asm-mips/cpu.h
-@@ -22,6 +22,11 @@
- spec.
- */
-
-+#define PRID_COPT_MASK 0xff000000
-+#define PRID_COMP_MASK 0x00ff0000
-+#define PRID_IMP_MASK 0x0000ff00
-+#define PRID_REV_MASK 0x000000ff
-+
- #define PRID_COMP_LEGACY 0x000000
- #define PRID_COMP_MIPS 0x010000
- #define PRID_COMP_BROADCOM 0x020000
-@@ -58,6 +63,7 @@
- #define PRID_IMP_RM7000 0x2700
- #define PRID_IMP_NEVADA 0x2800 /* RM5260 ??? */
- #define PRID_IMP_RM9000 0x3400
-+#define PRID_IMP_BCM4710 0x4000
- #define PRID_IMP_R5432 0x5400
- #define PRID_IMP_R5500 0x5500
- #define PRID_IMP_4KC 0x8000
-@@ -66,10 +72,16 @@
- #define PRID_IMP_4KEC 0x8400
- #define PRID_IMP_4KSC 0x8600
- #define PRID_IMP_25KF 0x8800
-+#define PRID_IMP_BCM3302 0x9000
-+#define PRID_IMP_BCM3303 0x9100
- #define PRID_IMP_24K 0x9300
-
- #define PRID_IMP_UNKNOWN 0xff00
-
-+#define BCM330X(id) \
-+ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \
-+ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
-+
- /*
- * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
- */
-@@ -174,7 +186,9 @@
- #define CPU_AU1550 57
- #define CPU_24K 58
- #define CPU_AU1200 59
--#define CPU_LAST 59
-+#define CPU_BCM4710 60
-+#define CPU_BCM3302 61
-+#define CPU_LAST 61
-
- /*
- * ISA Level encodings
---- a/include/asm-mips/r4kcache.h
-+++ b/include/asm-mips/r4kcache.h
-@@ -567,4 +567,17 @@ static inline void blast_scache128_page_
- cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
- }
-
-+extern inline void fill_icache_line(unsigned long addr)
-+{
-+ __asm__ __volatile__(
-+ ".set noreorder\n\t"
-+ ".set mips3\n\t"
-+ "cache %1, (%0)\n\t"
-+ ".set mips0\n\t"
-+ ".set reorder"
-+ :
-+ : "r" (addr),
-+ "i" (Fill));
-+}
-+
- #endif /* __ASM_R4KCACHE_H */
---- a/include/asm-mips/serial.h
-+++ b/include/asm-mips/serial.h
-@@ -223,6 +223,13 @@
- #define TXX927_SERIAL_PORT_DEFNS
- #endif
-
-+#ifdef CONFIG_BCM947XX
-+/* reserve 4 ports to be configured at runtime */
-+#define BCM947XX_SERIAL_PORT_DEFNS { 0, }, { 0, }, { 0, }, { 0, },
-+#else
-+#define BCM947XX_SERIAL_PORT_DEFNS
-+#endif
-+
- #ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
- #define STD_SERIAL_PORT_DEFNS \
- /* UART CLK PORT IRQ FLAGS */ \
-@@ -470,6 +477,7 @@
- #define SERIAL_PORT_DFNS \
- ATLAS_SERIAL_PORT_DEFNS \
- AU1000_SERIAL_PORT_DEFNS \
-+ BCM947XX_SERIAL_PORT_DEFNS \
- COBALT_SERIAL_PORT_DEFNS \
- DDB5477_SERIAL_PORT_DEFNS \
- EV96100_SERIAL_PORT_DEFNS \
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -255,7 +255,13 @@ static struct dev_name_struct {
- { "ftlb", 0x2c08 },
- { "ftlc", 0x2c10 },
- { "ftld", 0x2c18 },
-+#if defined(CONFIG_MTD_BLOCK) || defined(CONFIG_MTD_BLOCK_RO)
- { "mtdblock", 0x1f00 },
-+ { "mtdblock0",0x1f00 },
-+ { "mtdblock1",0x1f01 },
-+ { "mtdblock2",0x1f02 },
-+ { "mtdblock3",0x1f03 },
-+#endif
- { "nb", 0x2b00 },
- { NULL, 0 }
- };
+++ /dev/null
---- a/arch/mips/kernel/entry.S
-+++ b/arch/mips/kernel/entry.S
-@@ -100,6 +100,10 @@ END(except_vec1_generic)
- * and R4400 SC and MC versions.
- */
- NESTED(except_vec3_generic, 0, sp)
-+#ifdef CONFIG_BCM4710
-+ nop
-+ nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- mfc0 k0, CP0_INDEX
- #endif
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -14,6 +14,12 @@
- #include <linux/mm.h>
- #include <linux/bitops.h>
-
-+#ifdef CONFIG_BCM4710
-+#include "../bcm947xx/include/typedefs.h"
-+#include "../bcm947xx/include/sbconfig.h"
-+#include <asm/paccess.h>
-+#endif
-+
- #include <asm/bcache.h>
- #include <asm/bootinfo.h>
- #include <asm/cacheops.h>
-@@ -40,6 +46,7 @@ static struct bcache_ops no_sc_ops = {
- .bc_inv = (void *)no_sc_noop
- };
-
-+int bcm4710 = 0;
- struct bcache_ops *bcops = &no_sc_ops;
-
- #define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x2010)
-@@ -64,8 +71,10 @@ static inline void r4k_blast_dcache_page
- static inline void r4k_blast_dcache_page_setup(void)
- {
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
--
-- if (dc_lsize == 16)
-+
-+ if (bcm4710)
-+ r4k_blast_dcache_page = blast_dcache_page;
-+ else if (dc_lsize == 16)
- r4k_blast_dcache_page = blast_dcache16_page;
- else if (dc_lsize == 32)
- r4k_blast_dcache_page = r4k_blast_dcache_page_dc32;
-@@ -77,7 +86,9 @@ static void r4k_blast_dcache_page_indexe
- {
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
-
-- if (dc_lsize == 16)
-+ if (bcm4710)
-+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+ else if (dc_lsize == 16)
- r4k_blast_dcache_page_indexed = blast_dcache16_page_indexed;
- else if (dc_lsize == 32)
- r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed;
-@@ -89,7 +100,9 @@ static inline void r4k_blast_dcache_setu
- {
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
-
-- if (dc_lsize == 16)
-+ if (bcm4710)
-+ r4k_blast_dcache = blast_dcache;
-+ else if (dc_lsize == 16)
- r4k_blast_dcache = blast_dcache16;
- else if (dc_lsize == 32)
- r4k_blast_dcache = blast_dcache32;
-@@ -266,6 +279,7 @@ static void r4k___flush_cache_all(void)
- r4k_blast_dcache();
- r4k_blast_icache();
-
-+ if (!bcm4710)
- switch (current_cpu_data.cputype) {
- case CPU_R4000SC:
- case CPU_R4000MC:
-@@ -304,10 +318,10 @@ static void r4k_flush_cache_mm(struct mm
- * Kludge alert. For obscure reasons R4000SC and R4400SC go nuts if we
- * only flush the primary caches but R10000 and R12000 behave sane ...
- */
-- if (current_cpu_data.cputype == CPU_R4000SC ||
-+ if (!bcm4710 && (current_cpu_data.cputype == CPU_R4000SC ||
- current_cpu_data.cputype == CPU_R4000MC ||
- current_cpu_data.cputype == CPU_R4400SC ||
-- current_cpu_data.cputype == CPU_R4400MC)
-+ current_cpu_data.cputype == CPU_R4400MC))
- r4k_blast_scache();
- }
-
-@@ -383,12 +397,15 @@ static void r4k_flush_icache_range(unsig
- unsigned long ic_lsize = current_cpu_data.icache.linesz;
- unsigned long addr, aend;
-
-+ addr = start & ~(dc_lsize - 1);
-+ aend = (end - 1) & ~(dc_lsize - 1);
-+
- if (!cpu_has_ic_fills_f_dc) {
- if (end - start > dcache_size)
- r4k_blast_dcache();
- else {
-- addr = start & ~(dc_lsize - 1);
-- aend = (end - 1) & ~(dc_lsize - 1);
-+ BCM4710_PROTECTED_FILL_TLB(addr);
-+ BCM4710_PROTECTED_FILL_TLB(aend);
-
- while (1) {
- /* Hit_Writeback_Inv_D */
-@@ -403,8 +420,6 @@ static void r4k_flush_icache_range(unsig
- if (end - start > icache_size)
- r4k_blast_icache();
- else {
-- addr = start & ~(ic_lsize - 1);
-- aend = (end - 1) & ~(ic_lsize - 1);
- while (1) {
- /* Hit_Invalidate_I */
- protected_flush_icache_line(addr);
-@@ -413,6 +428,9 @@ static void r4k_flush_icache_range(unsig
- addr += ic_lsize;
- }
- }
-+
-+ if (bcm4710)
-+ flush_cache_all();
- }
-
- /*
-@@ -443,7 +461,8 @@ static void r4k_flush_icache_page(struct
- if (cpu_has_subset_pcaches) {
- unsigned long addr = (unsigned long) page_address(page);
-
-- r4k_blast_scache_page(addr);
-+ if (!bcm4710)
-+ r4k_blast_scache_page(addr);
- ClearPageDcacheDirty(page);
-
- return;
-@@ -451,6 +470,7 @@ static void r4k_flush_icache_page(struct
-
- if (!cpu_has_ic_fills_f_dc) {
- unsigned long addr = (unsigned long) page_address(page);
-+
- r4k_blast_dcache_page(addr);
- ClearPageDcacheDirty(page);
- }
-@@ -477,7 +497,7 @@ static void r4k_dma_cache_wback_inv(unsi
- /* Catch bad driver code */
- BUG_ON(size == 0);
-
-- if (cpu_has_subset_pcaches) {
-+ if (!bcm4710 && cpu_has_subset_pcaches) {
- unsigned long sc_lsize = current_cpu_data.scache.linesz;
-
- if (size >= scache_size) {
-@@ -509,6 +529,8 @@ static void r4k_dma_cache_wback_inv(unsi
- R4600_HIT_CACHEOP_WAR_IMPL;
- a = addr & ~(dc_lsize - 1);
- end = (addr + size - 1) & ~(dc_lsize - 1);
-+ BCM4710_FILL_TLB(a);
-+ BCM4710_FILL_TLB(end);
- while (1) {
- flush_dcache_line(a); /* Hit_Writeback_Inv_D */
- if (a == end)
-@@ -527,7 +549,7 @@ static void r4k_dma_cache_inv(unsigned l
- /* Catch bad driver code */
- BUG_ON(size == 0);
-
-- if (cpu_has_subset_pcaches) {
-+ if (!bcm4710 && (cpu_has_subset_pcaches)) {
- unsigned long sc_lsize = current_cpu_data.scache.linesz;
-
- if (size >= scache_size) {
-@@ -554,6 +576,8 @@ static void r4k_dma_cache_inv(unsigned l
- R4600_HIT_CACHEOP_WAR_IMPL;
- a = addr & ~(dc_lsize - 1);
- end = (addr + size - 1) & ~(dc_lsize - 1);
-+ BCM4710_FILL_TLB(a);
-+ BCM4710_FILL_TLB(end);
- while (1) {
- flush_dcache_line(a); /* Hit_Writeback_Inv_D */
- if (a == end)
-@@ -577,6 +601,8 @@ static void r4k_flush_cache_sigtramp(uns
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
-
- R4600_HIT_CACHEOP_WAR_IMPL;
-+ BCM4710_PROTECTED_FILL_TLB(addr);
-+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
- protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- protected_flush_icache_line(addr & ~(ic_lsize - 1));
- if (MIPS4K_ICACHE_REFILL_WAR) {
-@@ -986,10 +1012,12 @@ static void __init setup_scache(void)
- case CPU_R4000MC:
- case CPU_R4400SC:
- case CPU_R4400MC:
-- probe_scache_kseg1 = (probe_func_t) (KSEG1ADDR(&probe_scache));
-- sc_present = probe_scache_kseg1(config);
-- if (sc_present)
-- c->options |= MIPS_CPU_CACHE_CDEX_S;
-+ if (!bcm4710) {
-+ probe_scache_kseg1 = (probe_func_t) (KSEG1ADDR(&probe_scache));
-+ sc_present = probe_scache_kseg1(config);
-+ if (sc_present)
-+ c->options |= MIPS_CPU_CACHE_CDEX_S;
-+ }
- break;
-
- case CPU_R10000:
-@@ -1041,6 +1069,19 @@ static void __init setup_scache(void)
- static inline void coherency_setup(void)
- {
- change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
-+
-+#if defined(CONFIG_BCM4310) || defined(CONFIG_BCM4704) || defined(CONFIG_BCM5365)
-+ if (BCM330X(current_cpu_data.processor_id)) {
-+ uint32 cm;
-+
-+ cm = read_c0_diag();
-+ /* Enable icache */
-+ cm |= (1 << 31);
-+ /* Enable dcache */
-+ cm |= (1 << 30);
-+ write_c0_diag(cm);
-+ }
-+#endif
-
- /*
- * c0_status.cu=0 specifies that updates by the sc instruction use
-@@ -1073,6 +1114,12 @@ void __init ld_mmu_r4xx0(void)
- memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80);
- memcpy((void *)(KSEG1 + 0x100), &except_vec2_generic, 0x80);
-
-+ if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & PRID_REV_MASK) == 0) {
-+ printk("Enabling BCM4710A0 cache workarounds.\n");
-+ bcm4710 = 1;
-+ } else
-+ bcm4710 = 0;
-+
- probe_pcache();
- setup_scache();
-
---- a/arch/mips/mm/tlbex-mips32.S
-+++ b/arch/mips/mm/tlbex-mips32.S
-@@ -90,6 +90,9 @@
- .set noat
- LEAF(except_vec0_r4000)
- .set mips3
-+#ifdef CONFIG_BCM4704
-+ nop
-+#endif
- #ifdef CONFIG_SMP
- mfc0 k1, CP0_CONTEXT
- la k0, pgd_current
---- a/include/asm-mips/r4kcache.h
-+++ b/include/asm-mips/r4kcache.h
-@@ -15,6 +15,18 @@
- #include <asm/asm.h>
- #include <asm/cacheops.h>
-
-+#ifdef CONFIG_BCM4710
-+#define BCM4710_DUMMY_RREG() (((sbconfig_t *)(KSEG1ADDR(SB_ENUM_BASE + SBCONFIGOFF)))->sbimstate)
-+
-+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- #define cache_op(op,addr) \
- __asm__ __volatile__( \
- " .set noreorder \n" \
-@@ -27,12 +39,25 @@
-
- static inline void flush_icache_line_indexed(unsigned long addr)
- {
-- cache_op(Index_Invalidate_I, addr);
-+ unsigned int way;
-+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+
-+ for (way = 0; way < current_cpu_data.dcache.ways; way++) {
-+ cache_op(Index_Invalidate_I, addr);
-+ addr += ws_inc;
-+ }
- }
-
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
-- cache_op(Index_Writeback_Inv_D, addr);
-+ unsigned int way;
-+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+
-+ for (way = 0; way < current_cpu_data.dcache.ways; way++) {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, addr);
-+ addr += ws_inc;
-+ }
- }
-
- static inline void flush_scache_line_indexed(unsigned long addr)
-@@ -47,6 +72,7 @@ static inline void flush_icache_line(uns
-
- static inline void flush_dcache_line(unsigned long addr)
- {
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Writeback_Inv_D, addr);
- }
-
-@@ -91,6 +117,7 @@ static inline void protected_flush_icach
- */
- static inline void protected_writeback_dcache_line(unsigned long addr)
- {
-+ BCM4710_DUMMY_RREG();
- __asm__ __volatile__(
- ".set noreorder\n\t"
- ".set mips3\n"
-@@ -138,6 +165,62 @@ static inline void invalidate_tcache_pag
- : "r" (base), \
- "i" (op));
-
-+#define cache_unroll(base,op) \
-+ __asm__ __volatile__(" \
-+ .set noreorder; \
-+ .set mips3; \
-+ cache %1, (%0); \
-+ .set mips0; \
-+ .set reorder" \
-+ : \
-+ : "r" (base), \
-+ "i" (op));
-+
-+
-+static inline void blast_dcache(void)
-+{
-+ unsigned long start = KSEG0;
-+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+ unsigned long end = (start + dcache_size);
-+
-+ while(start < end) {
-+ BCM4710_DUMMY_RREG();
-+ cache_unroll(start,Index_Writeback_Inv_D);
-+ start += current_cpu_data.dcache.linesz;
-+ }
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+
-+ BCM4710_FILL_TLB(start);
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_unroll(start,Hit_Writeback_Inv_D);
-+ start += current_cpu_data.dcache.linesz;
-+ } while (start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+ unsigned long ws_end = current_cpu_data.dcache.ways <<
-+ current_cpu_data.dcache.waybit;
-+ unsigned long ws, addr;
-+
-+ for (ws = 0; ws < ws_end; ws += ws_inc) {
-+ start = page + ws;
-+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+ BCM4710_DUMMY_RREG();
-+ cache_unroll(addr,Index_Writeback_Inv_D);
-+ }
-+ }
-+}
-+
- static inline void blast_dcache16(void)
- {
- unsigned long start = KSEG0;
-@@ -148,8 +231,9 @@ static inline void blast_dcache16(void)
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
-- for (addr = start; addr < end; addr += 0x200)
-+ for (addr = start; addr < end; addr += 0x200) {
- cache16_unroll32(addr|ws,Index_Writeback_Inv_D);
-+ }
- }
-
- static inline void blast_dcache16_page(unsigned long page)
-@@ -173,8 +257,9 @@ static inline void blast_dcache16_page_i
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
-- for (addr = start; addr < end; addr += 0x200)
-+ for (addr = start; addr < end; addr += 0x200) {
- cache16_unroll32(addr|ws,Index_Writeback_Inv_D);
-+ }
- }
-
- static inline void blast_icache16(void)
-@@ -196,6 +281,7 @@ static inline void blast_icache16_page(u
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
-
-+ BCM4710_FILL_TLB(start);
- do {
- cache16_unroll32(start,Hit_Invalidate_I);
- start += 0x200;
-@@ -281,6 +367,7 @@ static inline void blast_scache16_page_i
- : "r" (base), \
- "i" (op));
-
-+
- static inline void blast_dcache32(void)
- {
- unsigned long start = KSEG0;
-@@ -291,8 +378,9 @@ static inline void blast_dcache32(void)
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
-- for (addr = start; addr < end; addr += 0x400)
-+ for (addr = start; addr < end; addr += 0x400) {
- cache32_unroll32(addr|ws,Index_Writeback_Inv_D);
-+ }
- }
-
- static inline void blast_dcache32_page(unsigned long page)
-@@ -316,8 +404,9 @@ static inline void blast_dcache32_page_i
- unsigned long ws, addr;
-
- for (ws = 0; ws < ws_end; ws += ws_inc)
-- for (addr = start; addr < end; addr += 0x400)
-+ for (addr = start; addr < end; addr += 0x400) {
- cache32_unroll32(addr|ws,Index_Writeback_Inv_D);
-+ }
- }
-
- static inline void blast_icache32(void)
-@@ -339,6 +428,7 @@ static inline void blast_icache32_page(u
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
-
-+ BCM4710_FILL_TLB(start);
- do {
- cache32_unroll32(start,Hit_Invalidate_I);
- start += 0x400;
-@@ -443,6 +533,7 @@ static inline void blast_icache64_page(u
- unsigned long start = page;
- unsigned long end = start + PAGE_SIZE;
-
-+ BCM4710_FILL_TLB(start);
- do {
- cache64_unroll32(start,Hit_Invalidate_I);
- start += 0x800;
---- a/include/asm-mips/stackframe.h
-+++ b/include/asm-mips/stackframe.h
-@@ -209,6 +209,20 @@
-
- #endif
-
-+#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4704)
-+
-+#undef RESTORE_SP_AND_RET
-+#define RESTORE_SP_AND_RET \
-+ lw sp, PT_R29(sp); \
-+ .set mips3; \
-+ nop; \
-+ nop; \
-+ eret; \
-+ .set mips0
-+
-+#endif
-+
-+
- #define RESTORE_SP \
- lw sp, PT_R29(sp); \
-
---- a/mm/memory.c
-+++ b/mm/memory.c
-@@ -927,6 +927,7 @@ static inline void break_cow(struct vm_a
- flush_page_to_ram(new_page);
- flush_cache_page(vma, address);
- establish_pte(vma, address, page_table, pte_mkwrite(pte_mkdirty(mk_pte(new_page, vma->vm_page_prot))));
-+ flush_icache_page(vma, new_page);
- }
-
- /*
+++ /dev/null
---- a/arch/mips/bcm947xx/Makefile
-+++ b/arch/mips/bcm947xx/Makefile
-@@ -11,6 +11,7 @@ export-objs := export.o
- obj-y := prom.o setup.o time.o sbmips.o gpio.o
- obj-y += nvram.o cfe_env.o hndpmu.o
- obj-y += sbutils.o utils.o bcmsrom.o hndchipc.o
-+obj-y += sflash.o
- obj-$(CONFIG_PCI) += sbpci.o pcibios.o
- obj-y += export.o
-
---- a/drivers/mtd/devices/Config.in
-+++ b/drivers/mtd/devices/Config.in
-@@ -5,6 +5,7 @@
- mainmenu_option next_comment
-
- comment 'Self-contained MTD device drivers'
-+bool ' Broadcom Chipcommon Serial Flash support' CONFIG_MTD_SFLASH
- dep_tristate ' Ramix PMC551 PCI Mezzanine RAM card support' CONFIG_MTD_PMC551 $CONFIG_MTD $CONFIG_PCI
- if [ "$CONFIG_MTD_PMC551" = "y" -o "$CONFIG_MTD_PMC551" = "m" ]; then
- bool ' PMC551 256M DRAM Bugfix' CONFIG_MTD_PMC551_BUGFIX
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -3,6 +3,8 @@
- #
- # $Id: Makefile,v 1.4 2001/06/26 21:10:05 spse Exp $
-
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
-+
- O_TARGET := devlink.o
-
- # *** BIG UGLY NOTE ***
-@@ -12,6 +14,7 @@ O_TARGET := devlink.o
- # here where previously there was none. We now have to ensure that
- # doc200[01].o are linked before docprobe.o
-
-+obj-$(CONFIG_MTD_SFLASH) += sflash.o
- obj-$(CONFIG_MTD_DOC1000) += doc1000.o
- obj-$(CONFIG_MTD_DOC2000) += doc2000.o
- obj-$(CONFIG_MTD_DOC2001) += doc2001.o
---- a/drivers/mtd/maps/Config.in
-+++ b/drivers/mtd/maps/Config.in
-@@ -48,6 +48,7 @@ if [ "$CONFIG_PPC" = "y" ]; then
- fi
-
- if [ "$CONFIG_MIPS" = "y" ]; then
-+ dep_tristate ' CFI Flash device mapped on Broadcom BCM947XX boards' CONFIG_MTD_BCM947XX $CONFIG_MTD_CFI
- dep_tristate ' Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
- dep_tristate ' Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
- dep_tristate ' Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -3,6 +3,8 @@
- #
- # $Id: Makefile,v 1.37 2003/01/24 14:26:38 dwmw2 Exp $
-
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include
-+
- BELOW25 := $(shell echo $(PATCHLEVEL) | sed s/[1234]/y/)
-
- ifeq ($(BELOW25),y)
-@@ -10,6 +12,7 @@ O_TARGET := mapslink.o
- endif
-
- # Chip mappings
-+obj-$(CONFIG_MTD_BCM947XX) += bcm947xx-flash.o
- obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
- obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
- obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
+++ /dev/null
---- a/drivers/bluetooth/hci_usb.c
-+++ b/drivers/bluetooth/hci_usb.c
-@@ -259,6 +259,9 @@ static int hci_usb_isoc_rx_submit(struct
- void *buf;
-
- mtu = husb->isoc_in_ep->wMaxPacketSize;
-+#ifdef CONFIG_BCM4710
-+ mtu = (mtu + 1) & ~1; /* brcm: isoc buffers must be aligned on word boundary */
-+#endif
- size = mtu * HCI_MAX_ISOC_FRAMES;
-
- buf = kmalloc(size, GFP_ATOMIC);
+++ /dev/null
---- a/arch/mips/lib/ide-std.c
-+++ b/arch/mips/lib/ide-std.c
-@@ -31,12 +31,14 @@ static int std_ide_default_irq(ide_ioreg
- static ide_ioreg_t std_ide_default_io_base(int index)
- {
- switch (index) {
-+#if 0
- case 0: return 0x1f0;
- case 1: return 0x170;
- case 2: return 0x1e8;
- case 3: return 0x168;
- case 4: return 0x1e0;
- case 5: return 0x160;
-+#endif
- default:
- return 0;
- }
+++ /dev/null
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -1,7 +1,9 @@
- /* b44.c: Broadcom 4400 device driver.
- *
- * Copyright (C) 2002 David S. Miller (davem@redhat.com)
-- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
-+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi)
-+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org)
- *
- * Distribute under GPL.
- */
-@@ -25,6 +27,39 @@
-
- #include "b44.h"
-
-+#include <typedefs.h>
-+#include <bcmdevs.h>
-+#include <osl.h>
-+#include <bcmnvram.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sflash.h>
-+
-+#ifdef CONFIG_BCM947XX
-+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
-+
-+static inline void e_aton(char *str, char *dest)
-+{
-+ int i = 0;
-+ u16 *d = (u16 *) dest;
-+
-+ if (str == NULL) {
-+ memset(dest, 0, 6);
-+ return;
-+ }
-+
-+ for (;;) {
-+ dest[i++] = (char) simple_strtoul(str, NULL, 16);
-+ str += 2;
-+ if (!*str++ || i == 6)
-+ break;
-+ }
-+}
-+
-+static int instance = 0;
-+#endif
-+
-+
- #define DRV_MODULE_NAME "b44"
- #define PFX DRV_MODULE_NAME ": "
- #define DRV_MODULE_VERSION "0.93"
-@@ -75,7 +110,7 @@ static char version[] __devinitdata =
- DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
-
- MODULE_AUTHOR("David S. Miller (davem@redhat.com)");
--MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
-+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver");
- MODULE_LICENSE("GPL");
- MODULE_PARM(b44_debug, "i");
- MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
-@@ -89,6 +124,8 @@ static struct pci_device_id b44_pci_tbl[
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4713,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
- { } /* terminate list with empty entry */
- };
-
-@@ -113,11 +150,13 @@ static int b44_wait_bit(struct b44 *bp,
- udelay(10);
- }
- if (i == timeout) {
-+#ifdef DEBUG
- printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit %08x of register "
- "%lx to %s.\n",
- bp->dev->name,
- bit, reg,
- (clear ? "clear" : "set"));
-+#endif
- return -ENODEV;
- }
- return 0;
-@@ -236,6 +275,8 @@ static void ssb_core_reset(struct b44 *b
- udelay(1);
- }
-
-+static int b44_4713_instance;
-+
- static int ssb_core_unit(struct b44 *bp)
- {
- #if 0
-@@ -258,6 +299,9 @@ static int ssb_core_unit(struct b44 *bp)
- break;
- };
- #endif
-+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
-+ return b44_4713_instance++;
-+ else
- return 0;
- }
-
-@@ -267,6 +311,28 @@ static int ssb_is_core_up(struct b44 *bp
- == SBTMSLOW_CLOCK);
- }
-
-+static inline void __b44_cam_read(struct b44 *bp, unsigned char *data, int index)
-+{
-+ u32 val;
-+
-+ bw32(B44_CAM_CTRL, (CAM_CTRL_READ |
-+ (index << CAM_CTRL_INDEX_SHIFT)));
-+
-+ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
-+
-+ val = br32(B44_CAM_DATA_LO);
-+
-+ data[2] = (val >> 24) & 0xFF;
-+ data[3] = (val >> 16) & 0xFF;
-+ data[4] = (val >> 8) & 0xFF;
-+ data[5] = (val >> 0) & 0xFF;
-+
-+ val = br32(B44_CAM_DATA_HI);
-+
-+ data[0] = (val >> 8) & 0xFF;
-+ data[1] = (val >> 0) & 0xFF;
-+}
-+
- static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
- {
- u32 val;
-@@ -287,7 +353,7 @@ static void __b44_cam_write(struct b44 *
-
- static inline void __b44_disable_ints(struct b44 *bp)
- {
-- bw32(B44_IMASK, 0);
-+ bw32(B44_IMASK, ISTAT_TO); /* leave the timeout interrupt active */
- }
-
- static void b44_disable_ints(struct b44 *bp)
-@@ -303,14 +369,14 @@ static void b44_enable_ints(struct b44 *
- bw32(B44_IMASK, bp->imask);
- }
-
--static int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+static int __b44_readphy(struct b44 *bp, int phy_addr, int reg, u32 *val)
- {
- int err;
-
- bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
- bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
- (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
-- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+ (phy_addr << MDIO_DATA_PMD_SHIFT) |
- (reg << MDIO_DATA_RA_SHIFT) |
- (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
- err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-@@ -319,23 +385,42 @@ static int b44_readphy(struct b44 *bp, i
- return err;
- }
-
--static int b44_writephy(struct b44 *bp, int reg, u32 val)
-+static int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+{
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ return 0;
-+
-+ return __b44_readphy(bp, bp->phy_addr, reg, val);
-+}
-+
-+static int __b44_writephy(struct b44 *bp, int phy_addr, int reg, u32 val)
- {
- bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
- bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
- (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
-- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+ (phy_addr << MDIO_DATA_PMD_SHIFT) |
- (reg << MDIO_DATA_RA_SHIFT) |
- (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) |
- (val & MDIO_DATA_DATA)));
- return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
- }
-
-+static int b44_writephy(struct b44 *bp, int reg, u32 val)
-+{
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ return 0;
-+
-+ return __b44_writephy(bp, bp->phy_addr, reg, val);
-+}
-+
- static int b44_phy_reset(struct b44 *bp)
- {
- u32 val;
- int err;
-
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ return 0;
-+
- err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
- if (err)
- return err;
-@@ -406,6 +491,23 @@ static int b44_setup_phy(struct b44 *bp)
- u32 val;
- int err;
-
-+
-+ /*
-+ * workaround for bad hardware design in Linksys WAP54G v1.0
-+ * see https://dev.openwrt.org/ticket/146
-+ * check and reset bit "isolate"
-+ */
-+ if ((bp->pdev->device == PCI_DEVICE_ID_BCM4713) &&
-+ (atoi(nvram_get("boardnum")) == 2) &&
-+ (__b44_readphy(bp, 0, MII_BMCR, &val) == 0) &&
-+ (val & BMCR_ISOLATE) &&
-+ (__b44_writephy(bp, 0, MII_BMCR, val & ~BMCR_ISOLATE) != 0)) {
-+ printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n");
-+ }
-+
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+ return 0;
-+
- if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
- goto out;
- if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-@@ -498,6 +600,19 @@ static void b44_check_phy(struct b44 *bp
- {
- u32 bmsr, aux;
-
-+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
-+ bp->flags |= B44_FLAG_100_BASE_T;
-+ bp->flags |= B44_FLAG_FULL_DUPLEX;
-+ if (!netif_carrier_ok(bp->dev)) {
-+ u32 val = br32(B44_TX_CTRL);
-+ val |= TX_CTRL_DUPLEX;
-+ bw32(B44_TX_CTRL, val);
-+ netif_carrier_on(bp->dev);
-+ b44_link_report(bp);
-+ }
-+ return;
-+ }
-+
- if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
- !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
- (bmsr != 0xffff)) {
-@@ -765,6 +880,25 @@ static int b44_rx(struct b44 *bp, int bu
- return received;
- }
-
-+
-+static inline void __b44_reset(struct b44 *bp)
-+{
-+ spin_lock_irq(&bp->lock);
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+ netif_wake_queue(bp->dev);
-+}
-+
-+static inline void __b44_set_timeout(struct b44 *bp, int timeout)
-+{
-+ /* Set timeout for Rx to two seconds after the last Tx */
-+ bw32(B44_GPTIMER, timeout ? 2 * 125000000 : 0);
-+}
-+
- static int b44_poll(struct net_device *netdev, int *budget)
- {
- struct b44 *bp = netdev->priv;
-@@ -772,13 +906,13 @@ static int b44_poll(struct net_device *n
-
- spin_lock_irq(&bp->lock);
-
-- if (bp->istat & (ISTAT_TX | ISTAT_TO)) {
-+ if (bp->istat & ISTAT_TX) {
- /* spin_lock(&bp->tx_lock); */
- b44_tx(bp);
- /* spin_unlock(&bp->tx_lock); */
- }
- spin_unlock_irq(&bp->lock);
--
-+
- done = 1;
- if (bp->istat & ISTAT_RX) {
- int orig_budget = *budget;
-@@ -796,24 +930,18 @@ static int b44_poll(struct net_device *n
- done = 0;
- }
-
-- if (bp->istat & ISTAT_ERRORS) {
-- spin_lock_irq(&bp->lock);
-- b44_halt(bp);
-- b44_init_rings(bp);
-- b44_init_hw(bp);
-- netif_wake_queue(bp->dev);
-- spin_unlock_irq(&bp->lock);
-- done = 1;
-- }
--
- if (done) {
- netif_rx_complete(netdev);
- b44_enable_ints(bp);
- }
-
-+ if ((bp->core_unit == 1) && (bp->istat & (ISTAT_TX | ISTAT_RX)))
-+ __b44_set_timeout(bp, (bp->istat & ISTAT_TX) ? 1 : 0);
-+
- return (done ? 0 : 1);
- }
-
-+
- static irqreturn_t b44_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
- struct net_device *dev = dev_id;
-@@ -832,6 +960,18 @@ static irqreturn_t b44_interrupt(int irq
- */
- istat &= imask;
- if (istat) {
-+ /* Workaround for the WL-500g WAN port hang */
-+ if (istat & (ISTAT_TO | ISTAT_ERRORS)) {
-+ /*
-+ * no rx before the watchdog timeout
-+ * reset the interface
-+ */
-+ __b44_reset(bp);
-+ }
-+
-+ if ((bp->core_unit == 1) && (bp->istat & (ISTAT_TX | ISTAT_RX)))
-+ __b44_set_timeout(bp, (bp->istat & ISTAT_TX) ? 1 : 0);
-+
- handled = 1;
- if (netif_rx_schedule_prep(dev)) {
- /* NOTE: These writes are posted by the readback of
-@@ -848,6 +988,7 @@ static irqreturn_t b44_interrupt(int irq
- bw32(B44_ISTAT, istat);
- br32(B44_ISTAT);
- }
-+
- spin_unlock_irqrestore(&bp->lock, flags);
- return IRQ_RETVAL(handled);
- }
-@@ -859,16 +1000,7 @@ static void b44_tx_timeout(struct net_de
- printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
- dev->name);
-
-- spin_lock_irq(&bp->lock);
--
-- b44_halt(bp);
-- b44_init_rings(bp);
-- b44_init_hw(bp);
--
-- spin_unlock_irq(&bp->lock);
--
-- b44_enable_ints(bp);
--
-+ __b44_reset(bp);
- netif_wake_queue(dev);
- }
-
-@@ -1092,6 +1224,8 @@ static void b44_clear_stats(struct b44 *
- /* bp->lock is held. */
- static void b44_chip_reset(struct b44 *bp)
- {
-+ unsigned int sb_clock;
-+
- if (ssb_is_core_up(bp)) {
- bw32(B44_RCV_LAZY, 0);
- bw32(B44_ENET_CTRL, ENET_CTRL_DISABLE);
-@@ -1105,9 +1239,10 @@ static void b44_chip_reset(struct b44 *b
- bw32(B44_DMARX_CTRL, 0);
- bp->rx_prod = bp->rx_cons = 0;
- } else {
-- ssb_pci_setup(bp, (bp->core_unit == 0 ?
-- SBINTVEC_ENET0 :
-- SBINTVEC_ENET1));
-+ /*if (bp->pdev->device != PCI_DEVICE_ID_BCM4713)*/
-+ ssb_pci_setup(bp, (bp->core_unit == 0 ?
-+ SBINTVEC_ENET0 :
-+ SBINTVEC_ENET1));
- }
-
- ssb_core_reset(bp);
-@@ -1115,6 +1250,11 @@ static void b44_chip_reset(struct b44 *b
- b44_clear_stats(bp);
-
- /* Make PHY accessible. */
-+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
-+ sb_clock = 100000000; /* 100 MHz */
-+ else
-+ sb_clock = 62500000; /* 62.5 MHz */
-+
- bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
- (0x0d & MDIO_CTRL_MAXF_MASK)));
- br32(B44_MDIO_CTRL);
-@@ -1216,6 +1356,8 @@ static int b44_open(struct net_device *d
- struct b44 *bp = dev->priv;
- int err;
-
-+ netif_carrier_off(dev);
-+
- err = b44_alloc_consistent(bp);
- if (err)
- return err;
-@@ -1236,9 +1378,10 @@ static int b44_open(struct net_device *d
- bp->timer.expires = jiffies + HZ;
- bp->timer.data = (unsigned long) bp;
- bp->timer.function = b44_timer;
-- add_timer(&bp->timer);
-+ b44_timer((unsigned long) bp);
-
- b44_enable_ints(bp);
-+ netif_start_queue(dev);
-
- return 0;
-
-@@ -1638,7 +1781,7 @@ static int b44_ioctl(struct net_device *
- u32 mii_regval;
-
- spin_lock_irq(&bp->lock);
-- err = b44_readphy(bp, data->reg_num & 0x1f, &mii_regval);
-+ err = __b44_readphy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
- spin_unlock_irq(&bp->lock);
-
- data->val_out = mii_regval;
-@@ -1651,7 +1794,7 @@ static int b44_ioctl(struct net_device *
- return -EPERM;
-
- spin_lock_irq(&bp->lock);
-- err = b44_writephy(bp, data->reg_num & 0x1f, data->val_in);
-+ err = __b44_writephy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
- spin_unlock_irq(&bp->lock);
-
- return err;
-@@ -1678,21 +1821,52 @@ static int b44_read_eeprom(struct b44 *b
- static int __devinit b44_get_invariants(struct b44 *bp)
- {
- u8 eeprom[128];
-+ u8 buf[32];
- int err;
-+ unsigned long flags;
-
-- err = b44_read_eeprom(bp, &eeprom[0]);
-- if (err)
-- goto out;
--
-- bp->dev->dev_addr[0] = eeprom[79];
-- bp->dev->dev_addr[1] = eeprom[78];
-- bp->dev->dev_addr[2] = eeprom[81];
-- bp->dev->dev_addr[3] = eeprom[80];
-- bp->dev->dev_addr[4] = eeprom[83];
-- bp->dev->dev_addr[5] = eeprom[82];
--
-- bp->phy_addr = eeprom[90] & 0x1f;
-- bp->mdc_port = (eeprom[90] >> 14) & 0x1;
-+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
-+#ifdef CONFIG_BCM947XX
-+ sprintf(buf, "et%dmacaddr", instance - 1);
-+ e_aton(nvram_get(buf), bp->dev->dev_addr);
-+
-+ sprintf(buf, "et%dphyaddr", instance - 1);
-+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+#else
-+ /*
-+ * BCM47xx boards don't have a EEPROM. The MAC is stored in
-+ * a NVRAM area somewhere in the flash memory. As we don't
-+ * know the location and/or the format of the NVRAM area
-+ * here, we simply rely on the bootloader to write the
-+ * MAC into the CAM.
-+ */
-+ spin_lock_irqsave(&bp->lock, flags);
-+ __b44_cam_read(bp, bp->dev->dev_addr, 0);
-+ spin_unlock_irqrestore(&bp->lock, flags);
-+
-+ /*
-+ * BCM47xx boards don't have a PHY. Usually there is a switch
-+ * chip with multiple PHYs connected to the PHY port.
-+ */
-+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+#endif
-+ bp->dma_offset = 0;
-+ } else {
-+ err = b44_read_eeprom(bp, &eeprom[0]);
-+ if (err)
-+ return err;
-+
-+ bp->dev->dev_addr[0] = eeprom[79];
-+ bp->dev->dev_addr[1] = eeprom[78];
-+ bp->dev->dev_addr[2] = eeprom[81];
-+ bp->dev->dev_addr[3] = eeprom[80];
-+ bp->dev->dev_addr[4] = eeprom[83];
-+ bp->dev->dev_addr[5] = eeprom[82];
-+
-+ bp->phy_addr = eeprom[90] & 0x1f;
-+ bp->dma_offset = SB_PCI_DMA;
-+ bp->mdc_port = (eeprom[90] >> 14) & 0x1;
-+ }
-
- /* With this, plus the rx_header prepended to the data by the
- * hardware, we'll land the ethernet header on a 2-byte boundary.
-@@ -1702,13 +1876,12 @@ static int __devinit b44_get_invariants(
- bp->imask = IMASK_DEF;
-
- bp->core_unit = ssb_core_unit(bp);
-- bp->dma_offset = ssb_get_addr(bp, SBID_PCI_DMA, 0);
-
- /* XXX - really required?
- bp->flags |= B44_FLAG_BUGGY_TXPTR;
- */
--out:
-- return err;
-+
-+ return 0;
- }
-
- static int __devinit b44_init_one(struct pci_dev *pdev,
-@@ -1720,6 +1893,10 @@ static int __devinit b44_init_one(struct
- struct b44 *bp;
- int err, i;
-
-+#ifdef CONFIG_BCM947XX
-+ instance++;
-+#endif
-+
- if (b44_version_printed++ == 0)
- printk(KERN_INFO "%s", version);
-
-@@ -1834,11 +2011,17 @@ static int __devinit b44_init_one(struct
- */
- b44_chip_reset(bp);
-
-- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
-+ printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name,
-+ (pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400");
- for (i = 0; i < 6; i++)
- printk("%2.2x%c", dev->dev_addr[i],
- i == 5 ? '\n' : ':');
-
-+ /* Initialize phy */
-+ spin_lock_irq(&bp->lock);
-+ b44_chip_reset(bp);
-+ spin_unlock_irq(&bp->lock);
-+
- return 0;
-
- err_out_iounmap:
---- a/drivers/net/b44.h
-+++ b/drivers/net/b44.h
-@@ -229,8 +229,6 @@
- #define SBIPSFLAG_IMASK4 0x3f000000 /* Which sbflags --> mips interrupt 4 */
- #define SBIPSFLAG_ISHIFT4 24
- #define B44_SBTPSFLAG 0x0F18UL /* SB Target Port OCP Slave Flag */
--#define SBTPS_NUM0_MASK 0x0000003f
--#define SBTPS_F0EN0 0x00000040
- #define B44_SBADMATCH3 0x0F60UL /* SB Address Match 3 */
- #define B44_SBADMATCH2 0x0F68UL /* SB Address Match 2 */
- #define B44_SBADMATCH1 0x0F70UL /* SB Address Match 1 */
-@@ -461,6 +459,8 @@ struct ring_info {
- };
-
- #define B44_MCAST_TABLE_SIZE 32
-+#define B44_PHY_ADDR_NO_PHY 30
-+#define B44_MDC_RATIO 5000000
-
- /* SW copy of device statistics, kept up to date by periodic timer
- * which probes HW values. Must have same relative layout as HW
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1765,6 +1765,7 @@
- #define PCI_DEVICE_ID_TIGON3_5901_2 0x170e
- #define PCI_DEVICE_ID_BCM4401 0x4401
- #define PCI_DEVICE_ID_BCM4401B0 0x4402
-+#define PCI_DEVICE_ID_BCM4713 0x4713
-
- #define PCI_VENDOR_ID_ENE 0x1524
- #define PCI_DEVICE_ID_ENE_1211 0x1211
+++ /dev/null
---- a/drivers/pcmcia/yenta.c
-+++ b/drivers/pcmcia/yenta.c
-@@ -543,6 +543,9 @@ static unsigned int yenta_probe_irq(pci_
- * Probe for usable interrupts using the force
- * register to generate bogus card status events.
- */
-+
-+#ifndef CONFIG_BCM947XX
-+ /* WRT54G3G does not like this */
- cb_writel(socket, CB_SOCKET_EVENT, -1);
- cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- exca_writeb(socket, I365_CSCINT, 0);
-@@ -557,7 +560,8 @@ static unsigned int yenta_probe_irq(pci_
- }
- cb_writel(socket, CB_SOCKET_MASK, 0);
- exca_writeb(socket, I365_CSCINT, 0);
--
-+#endif
-+
- mask = probe_irq_mask(val) & 0xffff;
-
- bridge_ctrl &= ~CB_BRIDGE_INTR;
-@@ -578,6 +582,12 @@ static void yenta_get_socket_capabilitie
- socket->cap.cb_dev = socket->dev;
- socket->cap.bus = NULL;
-
-+#ifdef CONFIG_BCM947XX
-+ /* irq mask probing is broken for the WRT54G3G */
-+ if (socket->cap.irq_mask == 0)
-+ socket->cap.irq_mask = 0x6f8;
-+#endif
-+
- printk(KERN_INFO "Yenta ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->cap.irq_mask, socket->cb_irq);
- }
-@@ -609,6 +619,15 @@ static void yenta_open_bh(void * data)
- printk(KERN_INFO "Socket status: %08x\n",
- cb_readl(socket, CB_SOCKET_STATE));
-
-+ /* Generate an interrupt on card insert/remove */
-+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+ /* Set up Multifunction Routing Status Register */
-+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+ /* Switch interrupts to parallelized */
-+ config_writeb(socket, 0x92, 0x64);
-+
- /* Register it with the pcmcia layer.. */
- cardbus_register(socket);
-
-@@ -731,7 +750,7 @@ static void yenta_allocate_res(pci_socke
- {
- struct pci_bus *bus;
- struct resource *root, *res;
-- u32 start, end;
-+ u32 start = 0, end = 0;
- u32 align, size, min, max;
- unsigned offset;
- unsigned mask;
-@@ -750,6 +769,15 @@ static void yenta_allocate_res(pci_socke
- res->end = 0;
- root = pci_find_parent_resource(socket->dev, res);
-
-+#ifdef CONFIG_BCM947XX
-+ /* default mem resources are completely fscked up on the wrt54g3g */
-+ /* bypass the entire resource allocation stuff below and just set it statically */
-+ if (type & IORESOURCE_MEM) {
-+ res->start = 0x40004000;
-+ res->end = res->start + 0x3fff;
-+ }
-+
-+#else
- if (!root)
- return;
-
-@@ -794,6 +822,7 @@ static void yenta_allocate_res(pci_socke
- res->start = res->end = 0;
- return;
- }
-+#endif
-
- config_writel(socket, offset, res->start);
- config_writel(socket, offset+4, res->end);
+++ /dev/null
---- a/drivers/net/b44.h
-+++ b/drivers/net/b44.h
-@@ -122,6 +122,7 @@
- #define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */
- #define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */
- #define RXCONFIG_RFILT 0x00000080 /* Reject Filter */
-+#define RXCONFIG_CAM_ABSENT 0x00000100 /* CAM Absent */
- #define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */
- #define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */
- #define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -1299,6 +1299,7 @@ static int b44_set_mac_addr(struct net_d
- {
- struct b44 *bp = dev->priv;
- struct sockaddr *addr = p;
-+ u32 val;
-
- if (netif_running(dev))
- return -EBUSY;
-@@ -1306,7 +1307,11 @@ static int b44_set_mac_addr(struct net_d
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
- spin_lock_irq(&bp->lock);
-- __b44_set_mac_addr(bp);
-+
-+ val = br32(B44_RXCONFIG);
-+ if (!(val & RXCONFIG_CAM_ABSENT))
-+ __b44_set_mac_addr(bp);
-+
- spin_unlock_irq(&bp->lock);
-
- return 0;
-@@ -1493,7 +1498,7 @@ static void __b44_set_rx_mode(struct net
-
- val = br32(B44_RXCONFIG);
- val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
-- if (dev->flags & IFF_PROMISC) {
-+ if ((dev->flags & IFF_PROMISC) || (val & RXCONFIG_CAM_ABSENT)) {
- val |= RXCONFIG_PROMISC;
- bw32(B44_RXCONFIG, val);
- } else {
+++ /dev/null
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -84,6 +84,11 @@ int qdisc_restart(struct net_device *dev
- struct sk_buff *skb;
-
- /* Dequeue packet */
-+ if (!q) {
-+ if (net_ratelimit())
-+ printk(KERN_DEBUG "HELP ME! qdisc_restart called, but no Qdisc!\n");
-+ return 0;
-+ }
- if ((skb = q->dequeue(q)) != NULL) {
- if (spin_trylock(&dev->xmit_lock)) {
- /* Remember that the driver is grabbed by us. */
+++ /dev/null
---- a/drivers/ide/pci/aec62xx.c
-+++ b/drivers/ide/pci/aec62xx.c
-@@ -3,6 +3,8 @@
- *
- * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
- *
-+ * With Broadcom 4780 patches
-+ *
- */
-
- #include <linux/module.h>
-@@ -329,7 +331,11 @@ static int aec62xx_config_drive_xfer_rat
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
-+#ifndef CONFIG_BCM947XX
- if ((id->capability & 1) && drive->autodma) {
-+#else
-+ if (1) {
-+#endif
- /* Consult the list of known "bad" drives */
- if (hwif->ide_dma_bad_drive(drive))
- goto fast_ata_pio;
-@@ -414,10 +420,60 @@ static unsigned int __init init_chipset_
- {
- int bus_speed = system_bus_clock();
-
-+#ifndef CONFIG_BCM947XX
- if (dev->resource[PCI_ROM_RESOURCE].start) {
- pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
- printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
- }
-+#else
-+ if (dev->resource[PCI_ROM_RESOURCE].start) {
-+ pci_write_config_dword(dev, PCI_ROM_ADDRESS,
-+ dev->resource[PCI_ROM_RESOURCE].
-+ start | PCI_ROM_ADDRESS_ENABLE);
-+ } else {
-+ pci_write_config_dword(dev, PCI_ROM_ADDRESS,
-+ dev->resource[PCI_ROM_RESOURCE].
-+ start);
-+ }
-+
-+ /* Set IDE controller parameters manually - FIXME: replace magic values */
-+ {
-+ byte setting;
-+
-+ pci_write_config_word(dev, PCI_COMMAND, 0x0007);
-+ //pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x5A);
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x13);
-+
-+ pci_write_config_byte(dev, 0x40, 0x31);
-+ pci_write_config_byte(dev, 0x41, 0x31);
-+ pci_write_config_byte(dev, 0x42, 0x31);
-+ pci_write_config_byte(dev, 0x43, 0x31);
-+ // Set IDE Command Speed
-+ pci_write_config_byte(dev, 0x48, 0x31);
-+
-+ // Disable WriteSubSysID & PIOROM
-+ pci_read_config_byte(dev, 0x49, &setting);
-+ setting &= 0x07;
-+ pci_write_config_byte(dev, 0x49, setting);
-+
-+ // Enable PCI burst & INTA & PCI memory read multiple, FIFO threshold=80
-+ pci_read_config_byte(dev, 0x4A, &setting);
-+ //setting = (setting & 0xFE) | 0xA8;
-+ setting = (setting & 0xFE) | 0xD8;
-+ setting = (setting & 0xF7);
-+ pci_write_config_byte(dev, 0x4A, setting);
-+
-+ //pci_write_config_byte(dev, 0x4B, 0x20);
-+ pci_write_config_byte(dev, 0x4B, 0x2C);
-+ //pci_write_config_byte(dev, 0x4B, 0x0C);
-+
-+ // Set PreRead count: 512 byte
-+ pci_write_config_byte(dev, 0x4C, 0);
-+ pci_write_config_word(dev, 0x4D, 0x0002);
-+ pci_write_config_byte(dev, 0x54, 0);
-+ pci_write_config_word(dev, 0x55, 0x0002);
-+ }
-+#endif
-
- #if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS)
- aec_devs[n_aec_devs++] = dev;
-@@ -500,6 +556,7 @@ static void __init init_setup_aec62xx (s
-
- static void __init init_setup_aec6x80 (struct pci_dev *dev, ide_pci_device_t *d)
- {
-+#ifndef CONFIG_BCM947XX /* Causes OOPS on BCM4780 */
- unsigned long bar4reg = pci_resource_start(dev, 4);
-
- if (inb(bar4reg+2) & 0x10) {
-@@ -512,6 +569,7 @@ static void __init init_setup_aec6x80 (s
- strcpy(d->name, "AEC6280R");
- }
-
-+#endif
- ide_setup_pci_device(dev, d);
- }
-
+++ /dev/null
---- a/drivers/ide/pci/pdc202xx_old.c
-+++ b/drivers/ide/pci/pdc202xx_old.c
-@@ -253,23 +253,23 @@ static int pdc202xx_tune_chipset (ide_dr
- pci_read_config_byte(dev, (drive_pci)|0x03, &DP);
-
- if (speed < XFER_SW_DMA_0) {
-- if ((AP & 0x0F) || (BP & 0x07)) {
-+ if ((AP & 0x0F) || (BP & 0x17)) {
- /* clear PIO modes of lower 8421 bits of A Register */
- pci_write_config_byte(dev, (drive_pci), AP &~0x0F);
- pci_read_config_byte(dev, (drive_pci), &AP);
-
- /* clear PIO modes of lower 421 bits of B Register */
-- pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0x07);
-+ pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0x17);
- pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
-
- pci_read_config_byte(dev, (drive_pci), &AP);
- pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
- }
- } else {
-- if ((BP & 0xF0) && (CP & 0x0F)) {
-+ if ((BP & 0xE0) && (CP & 0x0F)) {
- /* clear DMA modes of upper 842 bits of B Register */
- /* clear PIO forced mode upper 1 bit of B Register */
-- pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0xF0);
-+ pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0xE0);
- pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
-
- /* clear DMA modes of lower 8421 bits of C Register */
-@@ -373,6 +373,9 @@ static int config_chipset_for_dma (ide_d
- u8 ultra_66 = ((id->dma_ultra & 0x0010) ||
- (id->dma_ultra & 0x0008)) ? 1 : 0;
-
-+ if (hwif->rqsize != 256)
-+ hwif->rqsize = 256;
-+
- switch(dev->device) {
- case PCI_DEVICE_ID_PROMISE_20267:
- case PCI_DEVICE_ID_PROMISE_20265:
+++ /dev/null
---- /dev/null
-+++ b/drivers/usb/serial/sierra.c
-@@ -0,0 +1,1446 @@
-+/*
-+ * Sierra Wireless CDMA Wireless Serial USB drive
-+ *
-+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com>
-+ * Original Copy written by: 2005 Greg Kroah-Hartman <gregkh <at> suse.de>
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License version
-+ * 2 as published by the Free Software Foundation.
-+ *
-+ * Version history:
-+ Version 1.03 (Lloyd):
-+ Included support for DTR control and enhanced buffering (should help
-+ speed).
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/tty.h>
-+#include <linux/tty_driver.h>
-+#include <linux/tty_flip.h>
-+#include <linux/module.h>
-+#include <linux/usb.h>
-+#include <linux/mm.h>
-+#include <asm/uaccess.h>
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/spinlock.h>
-+#include <linux/smp_lock.h>
-+
-+#ifdef CONFIG_USB_SERIAL_DEBUG
-+ static int debug = 1;
-+#else
-+ static int debug;
-+#endif
-+
-+#include "usb-serial.h"
-+#include "sierra.h"
-+#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
-+#include "pl2303.h" // see /* BEGIN HORRIBLE HACK FOR PL2303 */ below
-+#endif
-+
-+#define DRIVER_VERSION "v1.03"
-+
-+#if 0
-+#define USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE 0
-+
-+#define USB_DEVICE_POWER_STATE_D0 0x0000
-+#define USB_DEVICE_POWER_STATE_D1 0x0001
-+#define USB_DEVICE_POWER_STATE_D2 0x0002
-+#define USB_DEVICE_POWER_STATE_D3 0x0003
-+
-+#define SET_CONTROL_LINE_STATE 0x22
-+/*
-+ * Output control lines.
-+ */
-+
-+#define ACM_CTRL_DTR 0x01
-+#define ACM_CTRL_RTS 0x02
-+#endif
-+
-+//static int sw_attach(struct usb_serial *serial);
-+static void sw_usb_serial_generic_shutdown(struct usb_serial *serial);
-+
-+static int sw_usb_serial_generic_open(struct usb_serial_port *port, struct file *filp);
-+static void sw_usb_serial_generic_close(struct usb_serial_port *port, struct file *filp);
-+
-+#if 1
-+/*-----------------------------------------------------------*/
-+static int serial_refcount;
-+static struct tty_driver serial_tty_driver;
-+static struct tty_struct * serial_tty[SERIAL_TTY_MINORS];
-+static struct termios * serial_termios[SERIAL_TTY_MINORS];
-+static struct termios * serial_termios_locked[SERIAL_TTY_MINORS];
-+static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */
-+
-+static LIST_HEAD(usb_serial_driver_list);
-+static struct usb_serial *get_free_serial (int num_ports, int *minor);
-+static void generic_write_bulk_callback (struct urb *urb);
-+static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,const struct usb_device_id *id);
-+static void usb_serial_disconnect(struct usb_device *dev, void *ptr);
-+static void sw_usb_serial_generic_read_bulk_callback (struct urb *urb);
-+static void port_softint(void *private);
-+static void return_serial (struct usb_serial *serial);
-+static struct usb_serial *get_free_serial (int num_ports, int *minor);
-+static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data);
-+/*-----------------------------------------------------------*/
-+
-+#endif
-+
-+
-+static struct usb_device_id id_table [] = {
-+ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
-+ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
-+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
-+ { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */
-+ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
-+ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
-+ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
-+ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
-+ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
-+ { USB_DEVICE(0x1199, 0x0023) }, /* Sierra Wireless C597 */
-+
-+ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
-+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
-+ { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
-+ { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
-+ { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Thinkpad internal) */
-+ { USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
-+ { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */
-+ { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
-+ { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
-+ { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780*/
-+ { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781*/
-+ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite*/
-+ { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */
-+ { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */
-+ { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */
-+ { USB_DEVICE(0x1199, 0x6853) }, /* Sierra Wireless AirCard 881 E */
-+ { USB_DEVICE(0x1199, 0x6855) }, /* Sierra Wireless AirCard 880 U */
-+ { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */
-+ { USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */
-+ { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
-+
-+ { USB_DEVICE(0x1199, 0x6468) }, /* Sierra Wireless MP3G - EVDO */
-+ { USB_DEVICE(0x1199, 0x6469) }, /* Sierra Wireless MP3G - UMTS/HSPA */
-+
-+ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
-+ { USB_DEVICE(0x0F3D, 0x0112) }, /* AirPrime/Sierra Wireless PC 5220 */
-+ { USB_DEVICE(0x05C6, 0x6613) }, /* Onda H600/ZTE MF330 */
-+ { }
-+};
-+
-+MODULE_DEVICE_TABLE(usb, id_table);
-+
-+static struct usb_driver sierra_driver = {
-+// .owner = THIS_MODULE,
-+ .name = "Sierra wireless",
-+ .probe = usb_serial_probe,
-+ .disconnect = usb_serial_disconnect,
-+ .id_table = id_table,
-+};
-+
-+static struct usb_serial_device_type sierra_device = {
-+// .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "Sierra Wireless",
-+// },
-+ .id_table = id_table,
-+ .num_interrupt_in = NUM_DONT_CARE,
-+ .num_bulk_in = NUM_DONT_CARE,
-+ .num_bulk_out = NUM_DONT_CARE,
-+ .num_ports = 3,
-+ //.startup = sw_attach,
-+ .shutdown = sw_usb_serial_generic_shutdown,
-+ .open = sw_usb_serial_generic_open,
-+ .close = sw_usb_serial_generic_close,
-+};
-+
-+#define MAX_NUM_PORTS 8
-+
-+/* local function prototypes */
-+static int serial_open (struct tty_struct *tty, struct file * filp);
-+static void serial_close (struct tty_struct *tty, struct file * filp);
-+static int serial_write (struct tty_struct * tty, int from_user, const unsigned char *buf, int count);
-+static int serial_write_room (struct tty_struct *tty);
-+static int serial_chars_in_buffer (struct tty_struct *tty);
-+static void serial_throttle (struct tty_struct * tty);
-+static void serial_unthrottle (struct tty_struct * tty);
-+static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
-+static void serial_set_termios (struct tty_struct *tty, struct termios * old);
-+//static void serial_shutdown (struct usb_serial *serial);
-+static void serial_break (struct tty_struct *tty, int break_state);
-+static int generic_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count);
-+static int generic_write_room (struct usb_serial_port *port);
-+static void generic_cleanup (struct usb_serial_port *port);
-+static int generic_chars_in_buffer (struct usb_serial_port *port);
-+//static void generic_shutdown (struct usb_serial *serial);
-+
-+#if 1
-+static struct tty_driver serial_tty_driver = {
-+ .magic = TTY_DRIVER_MAGIC,
-+ .driver_name = "usb-serial",
-+#ifndef CONFIG_DEVFS_FS
-+ .name = "ttyUSB",
-+#else
-+ .name = "usb/tts/%d",
-+#endif
-+ .major = SERIAL_TTY_MAJOR,
-+ .minor_start = 0,
-+ .num = SERIAL_TTY_MINORS,
-+ .type = TTY_DRIVER_TYPE_SERIAL,
-+ .subtype = SERIAL_TYPE_NORMAL,
-+ .flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS,
-+
-+ .refcount = &serial_refcount,
-+ .table = serial_tty,
-+ .termios = serial_termios,
-+ .termios_locked = serial_termios_locked,
-+
-+ .open = serial_open,
-+ .close = serial_close,
-+ .write = serial_write,
-+ .write_room = serial_write_room,
-+ .ioctl = serial_ioctl,
-+ .set_termios = serial_set_termios,
-+ .throttle = serial_throttle,
-+ .unthrottle = serial_unthrottle,
-+ .break_ctl = serial_break,
-+ .chars_in_buffer = serial_chars_in_buffer,
-+ .read_proc = serial_read_proc,
-+};
-+#endif
-+
-+
-+/*****************************************************************************
-+ * Driver tty interface functions
-+ *****************************************************************************/
-+static struct usb_serial *get_serial_by_minor (unsigned int minor)
-+{
-+ return serial_table[minor];
-+}
-+
-+static int serial_open (struct tty_struct *tty, struct file * filp)
-+{
-+ struct usb_serial *serial;
-+ struct usb_serial_port *port;
-+ unsigned int portNumber;
-+ int retval = 0;
-+
-+ dbg("%s", __FUNCTION__);
-+
-+ /* initialize the pointer incase something fails */
-+ tty->driver_data = NULL;
-+
-+ /* get the serial object associated with this tty pointer */
-+ serial = get_serial_by_minor (MINOR(tty->device));
-+
-+ if (serial_paranoia_check (serial, __FUNCTION__))
-+ return -ENODEV;
-+
-+ /* set up our port structure making the tty driver remember our port object, and us it */
-+ portNumber = MINOR(tty->device) - serial->minor;
-+ port = &serial->port[portNumber];
-+ tty->driver_data = port;
-+
-+ down (&port->sem);
-+ port->tty = tty;
-+
-+ /* lock this module before we call it */
-+ if (serial->type->owner)
-+ __MOD_INC_USE_COUNT(serial->type->owner);
-+
-+ ++port->open_count;
-+ if (port->open_count == 1) {
-+ /* only call the device specific open if this
-+ * is the first time the port is opened */
-+ if (serial->type->open)
-+ retval = serial->type->open(port, filp);
-+ else
-+ retval = sw_usb_serial_generic_open(port, filp);//@.@
-+ }
-+
-+ if (retval) {
-+ port->open_count = 0;
-+ if (serial->type->owner)
-+ __MOD_DEC_USE_COUNT(serial->type->owner);
-+ }
-+
-+ up (&port->sem);
-+ return retval;
-+}
-+
-+static void __serial_close(struct usb_serial_port *port, struct file *filp)
-+{
-+ if (!port->open_count) {
-+ dbg ("%s - port not opened", __FUNCTION__);
-+ return;
-+ }
-+
-+ --port->open_count;
-+ if (port->open_count <= 0) {
-+ /* only call the device specific close if this
-+ * port is being closed by the last owner */
-+ if (port->serial->type->close)
-+ port->serial->type->close(port, filp);
-+ else
-+ //generic_close(port, filp);
-+ sw_usb_serial_generic_close(port, filp);
-+ port->open_count = 0;
-+ }
-+
-+ if (port->serial->type->owner)
-+ __MOD_DEC_USE_COUNT(port->serial->type->owner);
-+}
-+
-+static void serial_close(struct tty_struct *tty, struct file * filp)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+
-+ if (!serial)
-+ return;
-+
-+ down (&port->sem);
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ /* if disconnect beat us to the punch here, there's nothing to do */
-+ if (tty->driver_data) {
-+ __serial_close(port, filp);
-+ }
-+
-+ up (&port->sem);
-+}
-+
-+static int serial_write (struct tty_struct * tty, int from_user, const unsigned char *buf, int count)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+ int retval = -EINVAL;
-+
-+ if (!serial)
-+ return -ENODEV;
-+
-+ down (&port->sem);
-+
-+ dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count);
-+
-+ if (!port->open_count) {
-+ dbg("%s - port not opened", __FUNCTION__);
-+ goto exit;
-+ }
-+
-+ /* pass on to the driver specific version of this function if it is available */
-+ if (serial->type->write)
-+ retval = serial->type->write(port, from_user, buf, count);
-+ else
-+ retval = generic_write(port, from_user, buf, count);
-+
-+exit:
-+ up (&port->sem);
-+ return retval;
-+}
-+
-+static int serial_write_room (struct tty_struct *tty)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+ int retval = -EINVAL;
-+
-+ if (!serial)
-+ return -ENODEV;
-+
-+ down (&port->sem);
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (!port->open_count) {
-+ dbg("%s - port not open", __FUNCTION__);
-+ goto exit;
-+ }
-+
-+ /* pass on to the driver specific version of this function if it is available */
-+ if (serial->type->write_room)
-+ retval = serial->type->write_room(port);
-+ else
-+ retval = generic_write_room(port);
-+
-+exit:
-+ up (&port->sem);
-+ return retval;
-+}
-+
-+static int serial_chars_in_buffer (struct tty_struct *tty)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+ int retval = -EINVAL;
-+
-+ if (!serial)
-+ return -ENODEV;
-+
-+ down (&port->sem);
-+
-+ dbg("%s = port %d", __FUNCTION__, port->number);
-+
-+ if (!port->open_count) {
-+ dbg("%s - port not open", __FUNCTION__);
-+ goto exit;
-+ }
-+
-+ /* pass on to the driver specific version of this function if it is available */
-+ if (serial->type->chars_in_buffer)
-+ retval = serial->type->chars_in_buffer(port);
-+ else
-+ retval = generic_chars_in_buffer(port);
-+
-+exit:
-+ up (&port->sem);
-+ return retval;
-+}
-+
-+static void serial_throttle (struct tty_struct * tty)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+
-+ if (!serial)
-+ return;
-+
-+ down (&port->sem);
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (!port->open_count) {
-+ dbg ("%s - port not open", __FUNCTION__);
-+ goto exit;
-+ }
-+
-+ /* pass on to the driver specific version of this function */
-+ if (serial->type->throttle)
-+ serial->type->throttle(port);
-+
-+exit:
-+ up (&port->sem);
-+}
-+
-+static void serial_unthrottle (struct tty_struct * tty)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+
-+ if (!serial)
-+ return;
-+
-+ down (&port->sem);
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (!port->open_count) {
-+ dbg("%s - port not open", __FUNCTION__);
-+ goto exit;
-+ }
-+
-+ /* pass on to the driver specific version of this function */
-+ if (serial->type->unthrottle)
-+ serial->type->unthrottle(port);
-+
-+exit:
-+ up (&port->sem);
-+}
-+
-+static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+ int retval = -ENODEV;
-+
-+ if (!serial)
-+ return -ENODEV;
-+
-+ down (&port->sem);
-+
-+ dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
-+
-+ if (!port->open_count) {
-+ dbg ("%s - port not open", __FUNCTION__);
-+ goto exit;
-+ }
-+
-+ /* pass on to the driver specific version of this function if it is available */
-+ if (serial->type->ioctl)
-+ retval = serial->type->ioctl(port, file, cmd, arg);
-+ else
-+ retval = -ENOIOCTLCMD;
-+
-+exit:
-+ up (&port->sem);
-+ return retval;
-+}
-+
-+static void serial_set_termios (struct tty_struct *tty, struct termios * old)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+
-+ if (!serial)
-+ return;
-+
-+ down (&port->sem);
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (!port->open_count) {
-+ dbg("%s - port not open", __FUNCTION__);
-+ goto exit;
-+ }
-+
-+ /* pass on to the driver specific version of this function if it is available */
-+ if (serial->type->set_termios)
-+ serial->type->set_termios(port, old);
-+
-+exit:
-+ up (&port->sem);
-+}
-+
-+static void serial_break (struct tty_struct *tty, int break_state)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+
-+ if (!serial)
-+ return;
-+
-+ down (&port->sem);
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (!port->open_count) {
-+ dbg("%s - port not open", __FUNCTION__);
-+ goto exit;
-+ }
-+
-+ /* pass on to the driver specific version of this function if it is available */
-+ if (serial->type->break_ctl)
-+ serial->type->break_ctl(port, break_state);
-+
-+exit:
-+ up (&port->sem);
-+}
-+#if 0
-+static void serial_shutdown (struct usb_serial *serial)
-+{
-+ dbg ("%s", __FUNCTION__);
-+
-+ if (serial->type->shutdown)
-+ serial->type->shutdown(serial);
-+ else
-+ generic_shutdown(serial);
-+}
-+#endif
-+static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data)
-+{
-+ struct usb_serial *serial;
-+ int length = 0;
-+ int i;
-+ off_t begin = 0;
-+ char tmp[40];
-+
-+ dbg("%s", __FUNCTION__);
-+ length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION);
-+ for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
-+ serial = get_serial_by_minor(i);
-+ if (serial == NULL)
-+ continue;
-+
-+ length += sprintf (page+length, "%d:", i);
-+ if (serial->type->owner)
-+ length += sprintf (page+length, " module:%s", serial->type->owner->name);
-+ length += sprintf (page+length, " name:\"%s\"", serial->type->name);
-+ length += sprintf (page+length, " vendor:%04x product:%04x", serial->vendor, serial->product);
-+ length += sprintf (page+length, " num_ports:%d", serial->num_ports);
-+ length += sprintf (page+length, " port:%d", i - serial->minor + 1);
-+
-+ usb_make_path(serial->dev, tmp, sizeof(tmp));
-+ length += sprintf (page+length, " path:%s", tmp);
-+
-+ length += sprintf (page+length, "\n");
-+ if ((length + begin) > (off + count))
-+ goto done;
-+ if ((length + begin) < off) {
-+ begin += length;
-+ length = 0;
-+ }
-+ }
-+ *eof = 1;
-+done:
-+ if (off >= (length + begin))
-+ return 0;
-+ *start = page + (off-begin);
-+ return ((count < begin+length-off) ? count : begin+length-off);
-+}
-+
-+
-+/*-----------------------------------------------------------*/
-+static int generic_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count)
-+{
-+ struct usb_serial *serial = port->serial;
-+ int result;
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (count == 0) {
-+ dbg("%s - write request of 0 bytes", __FUNCTION__);
-+ return (0);
-+ }
-+
-+ /* only do something if we have a bulk out endpoint */
-+ if (serial->num_bulk_out) {
-+ if (port->write_urb->status == -EINPROGRESS) {
-+ dbg("%s - already writing", __FUNCTION__);
-+ return (0);
-+ }
-+
-+ count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
-+
-+ if (from_user) {
-+ if (copy_from_user(port->write_urb->transfer_buffer, buf, count))
-+ return -EFAULT;
-+ }
-+ else {
-+ memcpy (port->write_urb->transfer_buffer, buf, count);
-+ }
-+
-+ usb_serial_debug_data (__FILE__, __FUNCTION__, count, port->write_urb->transfer_buffer);
-+
-+ /* set up our urb */
-+ usb_fill_bulk_urb (port->write_urb, serial->dev,
-+ usb_sndbulkpipe (serial->dev,
-+ port->bulk_out_endpointAddress),
-+ port->write_urb->transfer_buffer, count,
-+ ((serial->type->write_bulk_callback) ?
-+ serial->type->write_bulk_callback :
-+ generic_write_bulk_callback), port);
-+
-+ /* send the data out the bulk port */
-+ result = usb_submit_urb(port->write_urb);
-+ if (result)
-+ err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
-+ else
-+ result = count;
-+
-+ return result;
-+ }
-+
-+ /* no bulk out, so return 0 bytes written */
-+ return (0);
-+}
-+
-+static int generic_write_room (struct usb_serial_port *port)
-+{
-+ struct usb_serial *serial = port->serial;
-+ int room = 0;
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (serial->num_bulk_out) {
-+ if (port->write_urb->status != -EINPROGRESS)
-+ room = port->bulk_out_size;
-+ }
-+
-+ dbg("%s - returns %d", __FUNCTION__, room);
-+ return (room);
-+}
-+
-+static int generic_chars_in_buffer (struct usb_serial_port *port)
-+{
-+ struct usb_serial *serial = port->serial;
-+ int chars = 0;
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (serial->num_bulk_out) {
-+ if (port->write_urb->status == -EINPROGRESS)
-+ chars = port->write_urb->transfer_buffer_length;
-+ }
-+
-+ dbg("%s - returns %d", __FUNCTION__, chars);
-+ return (chars);
-+}
-+#if 0
-+static void generic_shutdown (struct usb_serial *serial)
-+{
-+ int i;
-+
-+ dbg("%s", __FUNCTION__);
-+
-+ /* stop reads and writes on all ports */
-+ for (i=0; i < serial->num_ports; ++i) {
-+ generic_cleanup (&serial->port[i]);
-+ }
-+}
-+static void generic_cleanup (struct usb_serial_port *port)
-+{
-+ struct usb_serial *serial = port->serial;
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (serial->dev) {
-+ /* shutdown any bulk reads that might be going on */
-+ if (serial->num_bulk_out)
-+ usb_unlink_urb (port->write_urb);
-+ if (serial->num_bulk_in)
-+ usb_unlink_urb (port->read_urb);
-+ }
-+}
-+#endif
-+/*----------------------------------------------------------*/
-+static void generic_write_bulk_callback (struct urb *urb)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (!serial) {
-+ dbg("%s - bad serial pointer, exiting", __FUNCTION__);
-+ return;
-+ }
-+
-+ if (urb->status) {
-+ dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
-+ return;
-+ }
-+
-+ queue_task(&port->tqueue, &tq_immediate);
-+ mark_bh(IMMEDIATE_BH);
-+
-+ return;
-+}
-+
-+static struct usb_serial *get_free_serial (int num_ports, int *minor)
-+{
-+ struct usb_serial *serial = NULL;
-+ int i, j;
-+ int good_spot;
-+
-+ dbg("%s %d", __FUNCTION__, num_ports);
-+
-+ *minor = 0;
-+ for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
-+ if (serial_table[i])
-+ continue;
-+
-+ good_spot = 1;
-+ for (j = 1; j <= num_ports-1; ++j)
-+ if (serial_table[i+j])
-+ good_spot = 0;
-+ if (good_spot == 0)
-+ continue;
-+
-+ if (!(serial = kmalloc(sizeof(struct usb_serial), GFP_KERNEL))) {
-+ err("%s - Out of memory", __FUNCTION__);
-+ return NULL;
-+ }
-+ memset(serial, 0, sizeof(struct usb_serial));
-+ serial->magic = USB_SERIAL_MAGIC;
-+ serial_table[i] = serial;
-+ *minor = i;
-+ dbg("%s - minor base = %d", __FUNCTION__, *minor);
-+ for (i = *minor+1; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i)
-+ serial_table[i] = serial;
-+ return serial;
-+ }
-+ return NULL;
-+}
-+
-+static void return_serial (struct usb_serial *serial)
-+{
-+ int i;
-+
-+ dbg("%s", __FUNCTION__);
-+
-+ if (serial == NULL)
-+ return;
-+
-+ for (i = 0; i < serial->num_ports; ++i) {
-+ serial_table[serial->minor + i] = NULL;
-+ }
-+
-+ return;
-+}
-+
-+static void port_softint(void *private)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *)private;
-+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-+ struct tty_struct *tty;
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (!serial)
-+ return;
-+
-+ tty = port->tty;
-+ if (!tty)
-+ return;
-+
-+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) {
-+ dbg("%s - write wakeup call.", __FUNCTION__);
-+ (tty->ldisc.write_wakeup)(tty);
-+ }
-+
-+ wake_up_interruptible(&tty->write_wait);
-+}
-+
-+
-+static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
-+ const struct usb_device_id *id)
-+{
-+ struct usb_serial *serial = NULL;
-+ struct usb_serial_port *port;
-+ struct usb_interface *interface;
-+ struct usb_interface_descriptor *iface_desc;
-+ struct usb_endpoint_descriptor *endpoint;
-+ struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
-+ struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
-+ struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
-+ struct usb_serial_device_type *type = NULL;
-+ struct list_head *tmp;
-+ int found;
-+ int minor;
-+ int buffer_size;
-+ int i;
-+ int num_interrupt_in = 0;
-+ int num_bulk_in = 0;
-+ int num_bulk_out = 0;
-+ int num_ports;
-+ int max_endpoints;
-+ const struct usb_device_id *id_pattern = NULL;
-+
-+ /* loop through our list of known serial converters, and see if this
-+ device matches. */
-+ found = 0;
-+ interface = &dev->actconfig->interface[ifnum];
-+ list_for_each (tmp, &usb_serial_driver_list) {
-+ type = list_entry(tmp, struct usb_serial_device_type, driver_list);
-+ id_pattern = usb_match_id(dev, interface, type->id_table);
-+ if (id_pattern != NULL) {
-+ dbg("descriptor matches");
-+ found = 1;
-+ break;
-+ }
-+ }
-+ if (!found) {
-+ /* no match */
-+ dbg("none matched");
-+ return(NULL);
-+ }
-+ /* descriptor matches, let's find the endpoints needed */
-+ /* check out the endpoints */
-+ iface_desc = &interface->altsetting[0];
-+ for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
-+ endpoint = &iface_desc->endpoint[i];
-+
-+ if ((endpoint->bEndpointAddress & 0x80) &&
-+ ((endpoint->bmAttributes & 3) == 0x02)) {
-+ /* we found a bulk in endpoint */
-+ dbg("found bulk in");
-+ bulk_in_endpoint[num_bulk_in] = endpoint;
-+ ++num_bulk_in;
-+ }
-+
-+ if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
-+ ((endpoint->bmAttributes & 3) == 0x02)) {
-+ /* we found a bulk out endpoint */
-+ dbg("found bulk out");
-+ bulk_out_endpoint[num_bulk_out] = endpoint;
-+ ++num_bulk_out;
-+ }
-+
-+ if ((endpoint->bEndpointAddress & 0x80) &&
-+ ((endpoint->bmAttributes & 3) == 0x03)) {
-+ /* we found a interrupt in endpoint */
-+ dbg("found interrupt in");
-+ interrupt_in_endpoint[num_interrupt_in] = endpoint;
-+ ++num_interrupt_in;
-+ }
-+ }
-+
-+#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
-+ /* BEGIN HORRIBLE HACK FOR PL2303 */
-+ /* this is needed due to the looney way its endpoints are set up */
-+ if (((dev->descriptor.idVendor == PL2303_VENDOR_ID) &&
-+ (dev->descriptor.idProduct == PL2303_PRODUCT_ID)) ||
-+ ((dev->descriptor.idVendor == ATEN_VENDOR_ID) &&
-+ (dev->descriptor.idProduct == ATEN_PRODUCT_ID))) {
-+ if (ifnum == 1) {
-+ /* check out the endpoints of the other interface*/
-+ interface = &dev->actconfig->interface[ifnum ^ 1];
-+ iface_desc = &interface->altsetting[0];
-+ for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
-+ endpoint = &iface_desc->endpoint[i];
-+ if ((endpoint->bEndpointAddress & 0x80) &&
-+ ((endpoint->bmAttributes & 3) == 0x03)) {
-+ /* we found a interrupt in endpoint */
-+ dbg("found interrupt in for Prolific device on separate interface");
-+ interrupt_in_endpoint[num_interrupt_in] = endpoint;
-+ ++num_interrupt_in;
-+ }
-+ }
-+ }
-+
-+ /* Now make sure the PL-2303 is configured correctly.
-+ * If not, give up now and hope this hack will work
-+ * properly during a later invocation of usb_serial_probe
-+ */
-+ if (num_bulk_in == 0 || num_bulk_out == 0) {
-+ info("PL-2303 hack: descriptors matched but endpoints did not");
-+ return NULL;
-+ }
-+ }
-+ /* END HORRIBLE HACK FOR PL2303 */
-+#endif
-+
-+ /* found all that we need */
-+ info("%s converter detected", type->name);
-+
-+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS
-+ if (type == &sierra_driver) {
-+ num_ports = num_bulk_out;
-+ if (num_ports == 0) {
-+ err("Sierra 3G device with no bulk out, not allowed.");
-+ return NULL;
-+ }
-+ } else
-+#endif
-+ num_ports = type->num_ports;
-+
-+ serial = get_free_serial (num_ports, &minor);
-+ if (serial == NULL) {
-+ err("No more free serial devices");
-+ return NULL;
-+ }
-+
-+ serial->dev = dev;
-+ serial->type = type;
-+ serial->interface = interface;
-+ serial->minor = minor;
-+ serial->num_ports = num_ports;
-+ serial->num_bulk_in = num_bulk_in;
-+ serial->num_bulk_out = num_bulk_out;
-+ serial->num_interrupt_in = num_interrupt_in;
-+ serial->vendor = dev->descriptor.idVendor;
-+ serial->product = dev->descriptor.idProduct;
-+
-+ /* set up the endpoint information */
-+ for (i = 0; i < num_bulk_in; ++i) {
-+ endpoint = bulk_in_endpoint[i];
-+ port = &serial->port[i];
-+ port->read_urb = usb_alloc_urb (0);
-+ if (!port->read_urb) {
-+ err("No free urbs available");
-+ goto probe_error;
-+ }
-+//Amin marked buffer_size = endpoint->wMaxPacketSize;
-+// ===> 20060310 Amin modify for improve EVDO and HSDPA Card
-+ buffer_size = 2048;
-+ printk("KERNEL DEBUG => USBSERIAL.O buffer_size = 2048\n");
-+// <=== 20060310 Amin modify for improve EVDO and HSDPA Card
-+ port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
-+ port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
-+ if (!port->bulk_in_buffer) {
-+ err("Couldn't allocate bulk_in_buffer");
-+ goto probe_error;
-+ }
-+ usb_fill_bulk_urb (port->read_urb, dev,
-+ usb_rcvbulkpipe (dev,
-+ endpoint->bEndpointAddress),
-+ port->bulk_in_buffer, buffer_size,
-+ ((serial->type->read_bulk_callback) ?
-+ serial->type->read_bulk_callback :
-+ sw_usb_serial_generic_read_bulk_callback),
-+ port);
-+ }
-+
-+ for (i = 0; i < num_bulk_out; ++i) {
-+ endpoint = bulk_out_endpoint[i];
-+ port = &serial->port[i];
-+ port->write_urb = usb_alloc_urb(0);
-+ if (!port->write_urb) {
-+ err("No free urbs available");
-+ goto probe_error;
-+ }
-+ buffer_size = endpoint->wMaxPacketSize;
-+ port->bulk_out_size = buffer_size;
-+ port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
-+ port->bulk_out_buffer = kmalloc (buffer_size, GFP_KERNEL);
-+ if (!port->bulk_out_buffer) {
-+ err("Couldn't allocate bulk_out_buffer");
-+ goto probe_error;
-+ }
-+ usb_fill_bulk_urb (port->write_urb, dev,
-+ usb_sndbulkpipe (dev,
-+ endpoint->bEndpointAddress),
-+ port->bulk_out_buffer, buffer_size,
-+ ((serial->type->write_bulk_callback) ?
-+ serial->type->write_bulk_callback :
-+ generic_write_bulk_callback),
-+ port);
-+ }
-+
-+ for (i = 0; i < num_interrupt_in; ++i) {
-+ endpoint = interrupt_in_endpoint[i];
-+ port = &serial->port[i];
-+ port->interrupt_in_urb = usb_alloc_urb(0);
-+ if (!port->interrupt_in_urb) {
-+ err("No free urbs available");
-+ goto probe_error;
-+ }
-+ buffer_size = endpoint->wMaxPacketSize;
-+ port->interrupt_in_endpointAddress = endpoint->bEndpointAddress;
-+ port->interrupt_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
-+ if (!port->interrupt_in_buffer) {
-+ err("Couldn't allocate interrupt_in_buffer");
-+ goto probe_error;
-+ }
-+ usb_fill_int_urb (port->interrupt_in_urb, dev,
-+ usb_rcvintpipe (dev,
-+ endpoint->bEndpointAddress),
-+ port->interrupt_in_buffer, buffer_size,
-+ serial->type->read_int_callback, port,
-+ endpoint->bInterval);
-+ }
-+
-+ /* initialize some parts of the port structures */
-+ /* we don't use num_ports here cauz some devices have more endpoint pairs than ports */
-+ max_endpoints = max(num_bulk_in, num_bulk_out);
-+ max_endpoints = max(max_endpoints, num_interrupt_in);
-+ max_endpoints = max(max_endpoints, (int)serial->num_ports);
-+ dbg("%s - setting up %d port structures for this device", __FUNCTION__, max_endpoints);
-+ for (i = 0; i < max_endpoints; ++i) {
-+ port = &serial->port[i];
-+ port->number = i + serial->minor;
-+ port->serial = serial;
-+ port->magic = USB_SERIAL_PORT_MAGIC;
-+ port->tqueue.routine = port_softint;
-+ port->tqueue.data = port;
-+ init_MUTEX (&port->sem);
-+ }
-+
-+ /* if this device type has a startup function, call it */
-+ if (type->startup) {
-+ i = type->startup (serial);
-+ if (i < 0)
-+ goto probe_error;
-+ if (i > 0)
-+ return serial;
-+ }
-+
-+ /* initialize the devfs nodes for this device and let the user know what ports we are bound to */
-+ for (i = 0; i < serial->num_ports; ++i) {
-+ tty_register_devfs (&serial_tty_driver, 0, serial->port[i].number);
-+ info("%s converter now attached to ttyUSB%d (or usb/tts/%d for devfs)",
-+ type->name, serial->port[i].number, serial->port[i].number);
-+ }
-+
-+ return serial; /* success */
-+
-+
-+probe_error:
-+ for (i = 0; i < num_bulk_in; ++i) {
-+ port = &serial->port[i];
-+ if (port->read_urb)
-+ usb_free_urb (port->read_urb);
-+ if (port->bulk_in_buffer)
-+ kfree (port->bulk_in_buffer);
-+ }
-+ for (i = 0; i < num_bulk_out; ++i) {
-+ port = &serial->port[i];
-+ if (port->write_urb)
-+ usb_free_urb (port->write_urb);
-+ if (port->bulk_out_buffer)
-+ kfree (port->bulk_out_buffer);
-+ }
-+ for (i = 0; i < num_interrupt_in; ++i) {
-+ port = &serial->port[i];
-+ if (port->interrupt_in_urb)
-+ usb_free_urb (port->interrupt_in_urb);
-+ if (port->interrupt_in_buffer)
-+ kfree (port->interrupt_in_buffer);
-+ }
-+
-+ /* return the minor range that this device had */
-+ return_serial (serial);
-+
-+ /* free up any memory that we allocated */
-+ kfree (serial);
-+ return NULL;
-+}
-+
-+static void usb_serial_disconnect(struct usb_device *dev, void *ptr)
-+{
-+ struct usb_serial *serial = (struct usb_serial *) ptr;
-+ struct usb_serial_port *port;
-+ int i;
-+
-+ dbg ("%s", __FUNCTION__);
-+ if (serial) {
-+ /* fail all future close/read/write/ioctl/etc calls */
-+ for (i = 0; i < serial->num_ports; ++i) {
-+ port = &serial->port[i];
-+ down (&port->sem);
-+ if (port->tty != NULL) {
-+ while (port->open_count > 0) {
-+ //__serial_close(port, NULL);
-+ sw_usb_serial_generic_close(port,NULL);
-+ }
-+ port->tty->driver_data = NULL;
-+ }
-+ up (&port->sem);
-+ }
-+
-+ serial->dev = NULL;
-+ //serial_shutdown (serial);
-+ sw_usb_serial_generic_shutdown(serial);
-+
-+ for (i = 0; i < serial->num_ports; ++i)
-+ serial->port[i].open_count = 0;
-+
-+ for (i = 0; i < serial->num_bulk_in; ++i) {
-+ port = &serial->port[i];
-+ if (port->read_urb) {
-+ usb_unlink_urb (port->read_urb);
-+ usb_free_urb (port->read_urb);
-+ }
-+ if (port->bulk_in_buffer)
-+ kfree (port->bulk_in_buffer);
-+ }
-+ for (i = 0; i < serial->num_bulk_out; ++i) {
-+ port = &serial->port[i];
-+ if (port->write_urb) {
-+ usb_unlink_urb (port->write_urb);
-+ usb_free_urb (port->write_urb);
-+ }
-+ if (port->bulk_out_buffer)
-+ kfree (port->bulk_out_buffer);
-+ }
-+ for (i = 0; i < serial->num_interrupt_in; ++i) {
-+ port = &serial->port[i];
-+ if (port->interrupt_in_urb) {
-+ usb_unlink_urb (port->interrupt_in_urb);
-+ usb_free_urb (port->interrupt_in_urb);
-+ }
-+ if (port->interrupt_in_buffer)
-+ kfree (port->interrupt_in_buffer);
-+ }
-+
-+ for (i = 0; i < serial->num_ports; ++i) {
-+ tty_unregister_devfs (&serial_tty_driver, serial->port[i].number);
-+ info("%s converter now disconnected from ttyUSB%d", serial->type->name, serial->port[i].number);
-+ }
-+
-+ /* return the minor range that this device had */
-+ return_serial (serial);
-+
-+ /* free up any memory that we allocated */
-+ kfree (serial);
-+
-+ } else {
-+ info("device disconnected");
-+ }
-+
-+}
-+
-+#if 0
-+static int sw_attach(struct usb_serial *serial)
-+{
-+ struct usb_device *hdev = serial->dev;
-+ int rc;
-+
-+ dbg("%s - serial(0x%p)", __FUNCTION__, serial);
-+
-+ rc = usb_control_msg(
-+ hdev,
-+ usb_sndctrlpipe(hdev, 0),
-+ USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE, /* bRequest */
-+ USB_TYPE_VENDOR|USB_RECIP_DEVICE, /* bmRequestType */
-+ USB_DEVICE_POWER_STATE_D0, /* wValue */
-+ 0, /* wIndex */
-+ NULL, /* Data */
-+ 0, /* wLength */
-+ 1000); /* Timeout */
-+
-+ err("%s - rc(%d)", __FUNCTION__, rc);
-+ return rc;
-+}
-+#endif
-+//void sw_usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
-+static void sw_usb_serial_generic_read_bulk_callback (struct urb *urb)
-+{
-+ struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
-+ struct usb_serial *serial = port->serial;
-+ struct tty_struct *tty;
-+ unsigned char *data = urb->transfer_buffer;
-+ int result;
-+ int i;
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (urb->status) {
-+ dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
-+ return;
-+ }
-+
-+ //usb_serial_dbg_data(__FILE__, __FUNCTION__, urb->actual_length, data);
-+
-+ tty = port->tty;
-+ if (tty && urb->actual_length) {
-+ #if 0
-+ tty_buffer_request_room(tty, urb->actual_length);
-+ tty_insert_flip_string(tty, data, urb->actual_length);
-+ tty_flip_buffer_push(tty);
-+ #endif
-+ #if 1
-+ for (i = 0; i < urb->actual_length ; ++i) {
-+ /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
-+ if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
-+ tty_flip_buffer_push(tty);
-+ }
-+ /* this doesn't actually push the data through unless tty->low_latency is set */
-+ tty_insert_flip_char(tty, data[i], 0);
-+ }
-+ tty_flip_buffer_push(tty);
-+ #endif
-+
-+ }
-+ else
-+ dbg("%s: empty read urb received", __FUNCTION__);
-+
-+ /* Continue trying to always read */
-+ usb_fill_bulk_urb (port->read_urb, serial->dev,
-+ usb_rcvbulkpipe (serial->dev,
-+ port->bulk_in_endpointAddress),
-+ port->read_urb->transfer_buffer,
-+ port->read_urb->transfer_buffer_length,
-+ ((serial->type->read_bulk_callback) ?
-+ serial->type->read_bulk_callback :
-+ sw_usb_serial_generic_read_bulk_callback), port);
-+ result = usb_submit_urb(port->read_urb);
-+ //result = usb_submit_urb(port->read_urb, GFP_ATOMIC); //for kernel 2.6
-+ if (result)
-+ dbg("%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
-+}
-+#if 1
-+static int generic_open (struct usb_serial_port *port, struct file *filp)
-+{
-+ struct usb_serial *serial = port->serial;
-+ int result = 0;
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ /* force low_latency on so that our tty_push actually forces the data through,
-+ otherwise it is scheduled, and with high data rates (like with OHCI) data
-+ can get lost. */
-+ if (port->tty)
-+ port->tty->low_latency = 1;
-+
-+ /* if we have a bulk interrupt, start reading from it */
-+ if (serial->num_bulk_in) {
-+ /* Start reading from the device */
-+ usb_fill_bulk_urb (port->read_urb, serial->dev,
-+ usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
-+ port->read_urb->transfer_buffer,
-+ port->read_urb->transfer_buffer_length,
-+ ((serial->type->read_bulk_callback) ?
-+ serial->type->read_bulk_callback :
-+ sw_usb_serial_generic_read_bulk_callback),
-+ port);
-+ result = usb_submit_urb(port->read_urb); //, GFP_KERNEL);
-+ if (result)
-+ //dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
-+ dbg("%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
-+
-+ }
-+
-+ return result;
-+}
-+#endif
-+int sw_usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
-+{
-+ int rc;
-+ struct usb_serial *serial = port->serial;
-+ struct usb_device *hdev = serial->dev;
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ rc = generic_open(port, filp);
-+ err("%s - rc(%d)", __FUNCTION__, rc);
-+
-+ if(0 == rc)
-+ {
-+ rc = usb_control_msg(
-+ hdev,
-+ usb_sndctrlpipe(hdev, 0),
-+ SET_CONTROL_LINE_STATE, /* bRequest */
-+ USB_TYPE_CLASS|USB_RECIP_INTERFACE, /* bmRequestType */
-+ ACM_CTRL_DTR|ACM_CTRL_RTS, /* wValue */
-+ 0, /* wIndex */
-+ NULL, /* Data */
-+ 0, /* wLength */
-+ 1000); /* Timeout */
-+ err("%s - usb_control_msg: rc(%d)", __FUNCTION__, rc);
-+ }
-+
-+ return rc;
-+}
-+
-+static void generic_cleanup (struct usb_serial_port *port)
-+{
-+ struct usb_serial *serial = port->serial;
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ if (serial->dev) {
-+ /* shutdown any bulk reads that might be going on */
-+ if (serial->num_bulk_out)
-+ usb_unlink_urb(port->write_urb);
-+ //usb_kill_urb(port->write_urb);
-+ if (serial->num_bulk_in)
-+ usb_unlink_urb(port->read_urb);
-+ //usb_kill_urb(port->read_urb);
-+ }
-+}
-+
-+static void sw_usb_serial_generic_close (struct usb_serial_port *port, struct file * filp)
-+{
-+ int rc;
-+ struct usb_serial *serial = port->serial;
-+ struct usb_device *hdev = serial->dev;
-+
-+ dbg("%s - port %d", __FUNCTION__, port->number);
-+
-+ rc = usb_control_msg(
-+ hdev,
-+ usb_sndctrlpipe(hdev, 0),
-+ SET_CONTROL_LINE_STATE, /* bRequest */
-+ USB_TYPE_CLASS|USB_RECIP_INTERFACE, /* bmRequestType */
-+ 0, /* wValue */
-+ 0, /* wIndex */
-+ NULL, /* Data */
-+ 0, /* wLength */
-+ 1000); /* Timeout */
-+ err("%s - rc(%d)", __FUNCTION__, rc);
-+
-+ generic_cleanup (port);
-+}
-+
-+static void sw_usb_serial_generic_shutdown(struct usb_serial *serial)
-+{
-+ int i, rc;
-+ struct usb_device *hdev = serial->dev;
-+
-+ dbg("%s serial(0x%p)", __FUNCTION__, serial);
-+
-+ if(hdev)
-+ {
-+ rc = usb_control_msg(
-+ hdev,
-+ usb_sndctrlpipe(hdev, 0),
-+ USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE, /* bRequest */
-+ USB_TYPE_VENDOR|USB_RECIP_DEVICE, /* bmRequestType */
-+ USB_DEVICE_POWER_STATE_D3, /* wValue */
-+ 0, /* wIndex */
-+ NULL, /* Data */
-+ 0, /* wLength */
-+ 1000); /* Timeout */
-+ err("%s - rc(%d)", __FUNCTION__, rc);
-+ }
-+
-+ /* stop reads and writes on all ports */
-+ for (i=0; i < serial->num_ports; ++i) {
-+ generic_cleanup(&serial->port[i]);
-+ }
-+}
-+int usb_serial_register(struct usb_serial_device_type *new_device)
-+{
-+ /* Add this device to our list of devices */
-+ list_add(&new_device->driver_list, &usb_serial_driver_list);
-+
-+ info ("USB Serial support registered for %s", new_device->name);
-+
-+ usb_scan_devices();
-+
-+ return 0;
-+}
-+
-+
-+void usb_serial_deregister(struct usb_serial_device_type *device)
-+{
-+ struct usb_serial *serial;
-+ int i;
-+
-+ info("USB Serial deregistering driver %s", device->name);
-+
-+ /* clear out the serial_table if the device is attached to a port */
-+ for(i = 0; i < SERIAL_TTY_MINORS; ++i) {
-+ serial = serial_table[i];
-+ if ((serial != NULL) && (serial->type == device)) {
-+ usb_driver_release_interface (&sierra_driver, serial->interface);
-+ usb_serial_disconnect (NULL, serial);
-+ }
-+ }
-+
-+ list_del(&device->driver_list);
-+}
-+
-+static int __init sierra_init(void)
-+{
-+ int retval;
-+ int i;
-+
-+ /* Initalize our global data */
-+ for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
-+ serial_table[i] = NULL;
-+ }
-+
-+ /* register the tty driver */
-+ serial_tty_driver.init_termios = tty_std_termios;
-+ serial_tty_driver.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-+ if (tty_register_driver (&serial_tty_driver)) {
-+ err("%s - failed to register tty driver", __FUNCTION__);
-+ return -1;
-+ }
-+
-+ retval = usb_serial_register(&sierra_device);
-+ if (retval)
-+ {
-+ tty_unregister_driver(&serial_tty_driver);
-+ printk("%s return usb_serial_register. retval=[%d].\n",__FUNCTION__, retval);
-+ return retval;
-+ }
-+ retval = usb_register(&sierra_driver);
-+ if (retval){
-+ usb_serial_deregister(&sierra_device);
-+ tty_unregister_driver(&serial_tty_driver);
-+ err("usb_register failed for the Sierra 3G USB-Serial driver. Error number %d\n", retval);
-+ return -1;
-+ }
-+
-+ return retval;
-+}
-+
-+static void __exit sierra_exit(void)
-+{
-+ usb_deregister(&sierra_driver);
-+ usb_serial_deregister(&sierra_device);
-+}
-+
-+module_init(sierra_init);
-+module_exit(sierra_exit);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/usb/serial/sierra.h
-@@ -0,0 +1,32 @@
-+/*
-+ * Sierra Wireless CDMA Wireless Serial USB drive
-+ *
-+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com>
-+ * Original Copy written by: 2005 Greg Kroah-Hartman <gregkh <at> suse.de>
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License version
-+ * 2 as published by the Free Software Foundation.
-+ *
-+ * Version history:
-+ Version 1.03 (Lloyd):
-+ Included support for DTR control and enhanced buffering (should help
-+ speed).
-+ */
-+
-+#define USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE 0
-+
-+#define USB_DEVICE_POWER_STATE_D0 0x0000
-+#define USB_DEVICE_POWER_STATE_D1 0x0001
-+#define USB_DEVICE_POWER_STATE_D2 0x0002
-+#define USB_DEVICE_POWER_STATE_D3 0x0003
-+
-+#define SET_CONTROL_LINE_STATE 0x22
-+/*
-+ * Output control lines.
-+ */
-+
-+#define ACM_CTRL_DTR 0x01
-+#define ACM_CTRL_RTS 0x02
-+
+++ /dev/null
---- a/drivers/usb/serial/Config.in
-+++ b/drivers/usb/serial/Config.in
-@@ -39,6 +39,7 @@ if [ "$CONFIG_USB_SERIAL" != "n" ]; then
- dep_tristate ' USB KOBIL chipcard reader (EXPERIMENTAL)' CONFIG_USB_SERIAL_KOBIL_SCT $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
- dep_tristate ' USB Prolific 2303 Single Port Serial Driver' CONFIG_USB_SERIAL_PL2303 $CONFIG_USB_SERIAL
- dep_tristate ' USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)' CONFIG_USB_SERIAL_CYBERJACK $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
-+ dep_tristate ' USB Sierra Wireless Driver' CONFIG_USB_SERIAL_SIERRAWIRELESS $CONFIG_USB_SERIAL
- dep_tristate ' USB Xircom / Entregra Single Port Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_XIRCOM $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
- dep_tristate ' USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_OMNINET $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
- fi
---- a/drivers/usb/serial/Makefile
-+++ b/drivers/usb/serial/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_USB_SERIAL_CYBERJACK) += c
- obj-$(CONFIG_USB_SERIAL_IR) += ir-usb.o
- obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o
- obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
-+obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
-
- # Objects that export symbols.
- export-objs := usbserial.o
+++ /dev/null
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -325,7 +325,7 @@ static void r4k_flush_cache_mm(struct mm
- r4k_blast_scache();
- }
-
--static void r4k_flush_cache_page(struct vm_area_struct *vma,
-+void r4k_flush_cache_page(struct vm_area_struct *vma,
- unsigned long page)
- {
- int exec = vma->vm_flags & VM_EXEC;
-@@ -385,6 +385,7 @@ static void r4k_flush_cache_page(struct
- r4k_blast_icache_page_indexed(page);
- }
- }
-+EXPORT_SYMBOL(r4k_flush_cache_page);
-
- static void r4k_flush_data_cache_page(unsigned long addr)
- {
---- a/arch/mips/mm/Makefile
-+++ b/arch/mips/mm/Makefile
-@@ -11,7 +11,7 @@ USE_STANDARD_AS_RULE := true
- O_TARGET := mm.o
-
- export-objs := cache.o ioremap.o loadmmu.o remap.o \
-- tlb-r4k.o tlb-sb1.o
-+ tlb-r4k.o tlb-sb1.o c-r4k.o
- obj-y += cache.o extable.o init.o ioremap.o fault.o \
- loadmmu.o
-
+++ /dev/null
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -445,16 +445,12 @@ struct net_device
- /* bridge stuff */
- struct net_bridge_port *br_port;
-
--#ifdef CONFIG_NET_FASTROUTE
- #define NETDEV_FASTROUTE_HMASK 0xF
- /* Semi-private data. Keep it at the end of device struct. */
- rwlock_t fastpath_lock;
- struct dst_entry *fastpath[NETDEV_FASTROUTE_HMASK+1];
--#endif
--#ifdef CONFIG_NET_DIVERT
- /* this will get initialized at each interface type init routine */
- struct divert_blk *divert;
--#endif /* CONFIG_NET_DIVERT */
- };
-
- /* 2.6 compatibility */
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -83,7 +83,6 @@
- #define NET_CALLER(arg) __builtin_return_address(0)
- #endif
-
--#ifdef CONFIG_NETFILTER
- struct nf_conntrack {
- atomic_t use;
- void (*destroy)(struct nf_conntrack *);
-@@ -92,7 +91,6 @@ struct nf_conntrack {
- struct nf_ct_info {
- struct nf_conntrack *master;
- };
--#endif
- #if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
- struct nf_info;
- #endif
-@@ -201,7 +199,6 @@ struct sk_buff {
- unsigned char *end; /* End pointer */
-
- void (*destructor)(struct sk_buff *); /* Destruct function */
--#ifdef CONFIG_NETFILTER
- /* Can be used for communication between hooks. */
- unsigned long nfmark;
- /* Cache info */
-@@ -211,7 +208,6 @@ struct sk_buff {
- #ifdef CONFIG_NETFILTER_DEBUG
- unsigned int nf_debug;
- #endif
--#endif /*CONFIG_NETFILTER*/
-
- #if defined(CONFIG_HIPPI)
- union{
-@@ -219,12 +215,8 @@ struct sk_buff {
- } private;
- #endif
-
--#ifdef CONFIG_NET_SCHED
- __u32 tc_index; /* traffic control index */
--#endif
--#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
- struct nf_info *nf_info;
--#endif
- };
-
- #ifdef __KERNEL__
+++ /dev/null
---- a/drivers/net/b44.c
-+++ b/drivers/net/b44.c
-@@ -101,7 +101,8 @@ static int instance = 0;
- (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP))
- #define NEXT_TX(N) (((N) + 1) & (B44_TX_RING_SIZE - 1))
-
--#define RX_PKT_BUF_SZ (1536 + bp->rx_offset + 64)
-+#define RX_HEADER_OFS (RX_HEADER_LEN + 2)
-+#define RX_PKT_BUF_SZ (1536 + RX_HEADER_OFS)
-
- /* minimum number of free TX descriptors required to wake up TX process */
- #define B44_TX_WAKEUP_THRESH (B44_TX_RING_SIZE / 4)
-@@ -734,10 +735,8 @@ static int b44_alloc_rx_skb(struct b44 *
- mapping = pci_map_single(bp->pdev, skb->data,
- RX_PKT_BUF_SZ,
- PCI_DMA_FROMDEVICE);
-- skb_reserve(skb, bp->rx_offset);
-
-- rh = (struct rx_header *)
-- (skb->data - bp->rx_offset);
-+ rh = (struct rx_header *) skb->data;
- rh->len = 0;
- rh->flags = 0;
-
-@@ -747,13 +746,13 @@ static int b44_alloc_rx_skb(struct b44 *
- if (src_map != NULL)
- src_map->skb = NULL;
-
-- ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - bp->rx_offset));
-+ ctrl = (DESC_CTRL_LEN & RX_PKT_BUF_SZ);
- if (dest_idx == (B44_RX_RING_SIZE - 1))
- ctrl |= DESC_CTRL_EOT;
-
- dp = &bp->rx_ring[dest_idx];
- dp->ctrl = cpu_to_le32(ctrl);
-- dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset);
-+ dp->addr = cpu_to_le32((u32) mapping + bp->dma_offset);
-
- return RX_PKT_BUF_SZ;
- }
-@@ -812,7 +811,7 @@ static int b44_rx(struct b44 *bp, int bu
- PCI_DMA_FROMDEVICE);
- rh = (struct rx_header *) skb->data;
- len = cpu_to_le16(rh->len);
-- if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) ||
-+ if ((len > (RX_PKT_BUF_SZ - RX_HEADER_OFS)) ||
- (rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) {
- drop_it:
- b44_recycle_rx(bp, cons, bp->rx_prod);
-@@ -844,8 +843,8 @@ static int b44_rx(struct b44 *bp, int bu
- pci_unmap_single(bp->pdev, map,
- skb_size, PCI_DMA_FROMDEVICE);
- /* Leave out rx_header */
-- skb_put(skb, len+bp->rx_offset);
-- skb_pull(skb,bp->rx_offset);
-+ skb_put(skb, len+RX_HEADER_OFS);
-+ skb_pull(skb,RX_HEADER_OFS);
- } else {
- struct sk_buff *copy_skb;
-
-@@ -858,7 +857,7 @@ static int b44_rx(struct b44 *bp, int bu
- skb_reserve(copy_skb, 2);
- skb_put(copy_skb, len);
- /* DMA sync done above, copy just the actual packet */
-- memcpy(copy_skb->data, skb->data+bp->rx_offset, len);
-+ memcpy(copy_skb->data, skb->data+RX_HEADER_OFS, len);
-
- skb = copy_skb;
- }
-@@ -1344,7 +1343,7 @@ static void b44_init_hw(struct b44 *bp)
- bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
- bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
- bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
-- (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
-+ (RX_HEADER_OFS << DMARX_CTRL_ROSHIFT)));
- bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
-
- bw32(B44_DMARX_PTR, bp->rx_pending);
-@@ -1873,13 +1872,7 @@ static int __devinit b44_get_invariants(
- bp->mdc_port = (eeprom[90] >> 14) & 0x1;
- }
-
-- /* With this, plus the rx_header prepended to the data by the
-- * hardware, we'll land the ethernet header on a 2-byte boundary.
-- */
-- bp->rx_offset = 30;
--
- bp->imask = IMASK_DEF;
--
- bp->core_unit = ssb_core_unit(bp);
-
- /* XXX - really required?
---- a/drivers/net/b44.h
-+++ b/drivers/net/b44.h
-@@ -518,8 +518,6 @@ struct b44 {
- #define B44_FLAG_ADV_100FULL 0x08000000
- #define B44_FLAG_INTERNAL_PHY 0x10000000
-
-- u32 rx_offset;
--
- u32 msg_enable;
-
- struct timer_list timer;
+++ /dev/null
---- a/net/ipv4/udp.c 2009-12-26 00:06:59.000000000 +0100
-+++ b/net/ipv4/udp.c 2009-12-27 00:27:05.003012266 +0100
-@@ -711,7 +711,14 @@
- skb = skb_recv_datagram(sk, flags, noblock, &err);
- if (!skb)
- goto out;
--
-+
-+ if (skb->nh.iph->version != 4) {
-+ skb_free_datagram(sk, skb);
-+ if (noblock)
-+ return -EAGAIN;
-+ goto try_again;
-+ }
-+
- copied = skb->len - sizeof(struct udphdr);
- if (copied > len) {
- copied = len;
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Broadcom
- NAME:=Generic, Broadcom WiFi (default)
- PACKAGES:=kmod-brcm-wl-old wlc-old nas-old kmod-wlcompat
-endef
-
-define Profile/Broadcom/Description
- Default package set compatible with most BCM947xx hardware
-endef
-$(eval $(call Profile,Broadcom))
-
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/BroadcomMimo
- NAME:=Generic, Broadcom WiFi (MIMO)
- PACKAGES:=kmod-brcm-wl-mimo-old wlc-old nas-old kmod-wlcompat
-endef
-
-define Profile/BroadcomMimo/Description
- Default package set compatible with 802.11n (draft) hardware
-endef
-$(eval $(call Profile,BroadcomMimo))
-
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/None
- NAME:=Generic, No WiFi
- PACKAGES:=
-endef
-
-define Profile/None/Description
- Package set without WiFi support
-endef
-$(eval $(call Profile,None))
-
+++ /dev/null
-#
-# Copyright (C) 2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/USBGeneric
- NAME:=Generic USB
- PACKAGES:=kmod-brcm-wl-old kmod-usb-core kmod-usb-ohci kmod-usb2 wlc-old nas-old kmod-wlcompat
-endef
-
-define Profile/USBGeneric/Description
- Package set with for Broadcom routers with USB/USB2 (OHCI/EHCI) support.
- Includes the WRTSL54GS, WL-520gU, WL-500gP v2, any other BCM5354 routers
- with USB.
-endef
-$(eval $(call Profile,USBGeneric))
-
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/WL500G
- NAME:=ASUS WL-500g
- PACKAGES:=kmod-brcm-wl-old kmod-usb-core kmod-usb-ohci kmod-lp wlc-old nas-old kmod-wlcompat
-endef
-
-define Profile/WL500G/Description
- Package set optimized for the WL-500g with USB and parallel port support
-endef
-$(eval $(call Profile,WL500G))
-
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/WL500GD
- NAME:=ASUS WL-500g Deluxe
- PACKAGES:=kmod-brcm-wl-old kmod-usb-core kmod-usb-uhci kmod-usb2 wlc-old nas-old kmod-wlcompat
-endef
-
-define Profile/WL500GD/Description
- Package set optimized for the WL-500g Deluxe with USB support
-endef
-$(eval $(call Profile,WL500GD))
-
+++ /dev/null
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/WL500GP
- NAME:=ASUS WL-500g Premium
- PACKAGES:=kmod-brcm-wl-old kmod-usb-core kmod-usb-uhci-iv kmod-usb2 wlc-old nas-old kmod-wlcompat
-endef
-
-define Profile/WL500GP/Description
- Package set optimized for the WL-500g Premium with USB support
-endef
-$(eval $(call Profile,WL500GP))
-
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/WL700GE
- NAME:=WL-700gE
- PACKAGES:=-ppp -ppp-mod-pppoe -kmod-ipt-nathelper -iptables -dnsmasq -bridge kmod-ide-core kmod-ide-aec62xx kmod-fs-ext3 fdisk e2fsprogs
-endef
-
-define Profile/WL700GE/Description
- Minimal package set optimized for booting the WL-700gE from flash with a writable filesystem
- and the utilities to create a new filesystem on the HDD
-endef
-$(eval $(call Profile,WL700GE))
-
-
+++ /dev/null
-#
-# Copyright (C) 2006-2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/WLHDD
- NAME:=WL-HDD
- PACKAGES:=kmod-brcm-wl-old kmod-usb-core kmod-usb-ohci kmod-ide-core kmod-ide-pdc202xx wlc-old nas-old kmod-wlcompat kmod-rtc-rv5c386a
-endef
-
-define Profile/WLHDD/Description
- Package set optimized for the WL-HDD with USB and IDE support
-endef
-$(eval $(call Profile,WLHDD))
-
+++ /dev/null
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/WRT300Nv11
- NAME:=Linksys WRT300N v1.1
- PACKAGES:=kmod-brcm-wl-mimo-old wlc-old nas-old kmod-wlcompat kmod-brcm-57xx
-endef
-
-define Profile/WRT300Nv11/Description
- Package set optimized for the WRT300N v1.1
-endef
-$(eval $(call Profile,WRT300Nv11))
-
+++ /dev/null
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/WRT54G3G
- NAME:=Linksys WRT54G3G
- PACKAGES:=kmod-brcm-wl-old kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-pcmcia-core kmod-pcmcia-serial kmod-nozomi comgt wlc-old nas-old kmod-wlcompat
-endef
-
-define Profile/WRT54G3G/Description
- Package set optimized for the WRT54G3G with UMTS support
-endef
-$(eval $(call Profile,WRT54G3G))
-
projects / openwrt / staging / luka.git / commitdiff