struct iwl_mvm_reorder_buffer reorder_buf[];
};
+/*
+ * enum iwl_mvm_queue_status - queue status
+ * @IWL_MVM_QUEUE_FREE: the queue is not allocated nor reserved
+ * Basically, this means that this queue can be used for any purpose
+ * @IWL_MVM_QUEUE_RESERVED: queue is reserved but not yet in use
+ * This is the state of a queue that has been dedicated for some RATID
+ * (agg'd or not), but that hasn't yet gone through the actual enablement
+ * of iwl_mvm_enable_txq(), and therefore no traffic can go through it yet.
+ * Note that in this state there is no requirement to already know what TID
+ * should be used with this queue, it is just marked as a queue that will
+ * be used, and shouldn't be allocated to anyone else.
+ * @IWL_MVM_QUEUE_READY: queue is ready to be used
+ * This is the state of a queue that has been fully configured (including
+ * SCD pointers, etc), has a specific RA/TID assigned to it, and can be
+ * used to send traffic.
+ */
+enum iwl_mvm_queue_status {
+ IWL_MVM_QUEUE_FREE,
+ IWL_MVM_QUEUE_RESERVED,
+ IWL_MVM_QUEUE_READY,
+};
+
struct iwl_mvm {
/* for logger access */
struct device *dev;
u32 hw_queue_to_mac80211;
u8 hw_queue_refcount;
u8 ra_sta_id; /* The RA this queue is mapped to, if exists */
- /*
- * This is to mark that queue is reserved for a STA but not yet
- * allocated. This is needed to make sure we have at least one
- * available queue to use when adding a new STA
- */
- bool setup_reserved;
u16 tid_bitmap; /* Bitmap of the TIDs mapped to this queue */
+ enum iwl_mvm_queue_status status;
} queue_info[IWL_MAX_HW_QUEUES];
spinlock_t queue_info_lock; /* For syncing queue mgmt operations */
struct work_struct add_stream_wk; /* To add streams to queues */
void iwl_mvm_start_mac_queues(struct iwl_mvm *mvm, unsigned long mq);
void iwl_mvm_stop_mac_queues(struct iwl_mvm *mvm, unsigned long mq);
+/* Re-configure the SCD for a queue that has already been configured */
+int iwl_mvm_reconfig_scd(struct iwl_mvm *mvm, int queue, int fifo, int sta_id,
+ int tid, int frame_limit, u16 ssn);
+
/* Thermal management and CT-kill */
void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff);
void iwl_mvm_tt_temp_changed(struct iwl_mvm *mvm, u32 temp);
u8 mac_queue = mvmsta->vif->hw_queue[ac];
int queue = -1;
int ssn;
+ int ret;
lockdep_assert_held(&mvm->mutex);
if (queue < 0)
queue = iwl_mvm_find_free_queue(mvm, IWL_MVM_DQA_MIN_DATA_QUEUE,
IWL_MVM_DQA_MAX_DATA_QUEUE);
+
+ /*
+ * Mark TXQ as ready, even though it hasn't been fully configured yet,
+ * to make sure no one else takes it.
+ * This will allow avoiding re-acquiring the lock at the end of the
+ * configuration. On error we'll mark it back as free.
+ */
if (queue >= 0)
- mvm->queue_info[queue].setup_reserved = false;
+ mvm->queue_info[queue].status = IWL_MVM_QUEUE_READY;
spin_unlock_bh(&mvm->queue_info_lock);
mvmsta->reserved_queue = IEEE80211_INVAL_HW_QUEUE;
spin_unlock_bh(&mvmsta->lock);
- return iwl_mvm_sta_send_to_fw(mvm, sta, true, STA_MODIFY_QUEUES);
+ ret = iwl_mvm_sta_send_to_fw(mvm, sta, true, STA_MODIFY_QUEUES);
+ if (ret)
+ goto out_err;
+
+ return 0;
+
+out_err:
+ iwl_mvm_disable_txq(mvm, queue, mac_queue, tid, 0);
+
+ return ret;
}
static inline u8 iwl_mvm_tid_to_ac_queue(int tid)
/* Make sure we have free resources for this STA */
if (vif_type == NL80211_IFTYPE_STATION && !sta->tdls &&
!mvm->queue_info[IWL_MVM_DQA_BSS_CLIENT_QUEUE].hw_queue_refcount &&
- !mvm->queue_info[IWL_MVM_DQA_BSS_CLIENT_QUEUE].setup_reserved)
+ (mvm->queue_info[IWL_MVM_DQA_BSS_CLIENT_QUEUE].status ==
+ IWL_MVM_QUEUE_FREE))
queue = IWL_MVM_DQA_BSS_CLIENT_QUEUE;
else
queue = iwl_mvm_find_free_queue(mvm, IWL_MVM_DQA_MIN_DATA_QUEUE,
IWL_ERR(mvm, "No available queues for new station\n");
return -ENOSPC;
}
- mvm->queue_info[queue].setup_reserved = true;
+ mvm->queue_info[queue].status = IWL_MVM_QUEUE_RESERVED;
spin_unlock_bh(&mvm->queue_info_lock);
mvm_sta->tfd_queue_msk |= BIT(queue);
mvm_sta->tid_disable_agg &= ~BIT(tid);
} else {
- mvm_sta->tfd_queue_msk &= ~BIT(queue);
+ /* In DQA-mode the queue isn't removed on agg termination */
+ if (!iwl_mvm_is_dqa_supported(mvm))
+ mvm_sta->tfd_queue_msk &= ~BIT(queue);
mvm_sta->tid_disable_agg |= BIT(tid);
}
spin_lock_bh(&mvm->queue_info_lock);
- txq_id = iwl_mvm_find_free_queue(mvm, mvm->first_agg_queue,
- mvm->last_agg_queue);
- if (txq_id < 0) {
- ret = txq_id;
- spin_unlock_bh(&mvm->queue_info_lock);
- IWL_ERR(mvm, "Failed to allocate agg queue\n");
- goto release_locks;
+ /*
+ * Note the possible cases:
+ * 1. In DQA mode with an enabled TXQ - TXQ needs to become agg'ed
+ * 2. Non-DQA mode: the TXQ hasn't yet been enabled, so find a free
+ * one and mark it as reserved
+ * 3. In DQA mode, but no traffic yet on this TID: same treatment as in
+ * non-DQA mode, since the TXQ hasn't yet been allocated
+ */
+ txq_id = mvmsta->tid_data[tid].txq_id;
+ if (!iwl_mvm_is_dqa_supported(mvm) ||
+ mvm->queue_info[txq_id].status != IWL_MVM_QUEUE_READY) {
+ txq_id = iwl_mvm_find_free_queue(mvm, mvm->first_agg_queue,
+ mvm->last_agg_queue);
+ if (txq_id < 0) {
+ ret = txq_id;
+ spin_unlock_bh(&mvm->queue_info_lock);
+ IWL_ERR(mvm, "Failed to allocate agg queue\n");
+ goto release_locks;
+ }
+
+ /* TXQ hasn't yet been enabled, so mark it only as reserved */
+ mvm->queue_info[txq_id].status = IWL_MVM_QUEUE_RESERVED;
}
- mvm->queue_info[txq_id].setup_reserved = true;
spin_unlock_bh(&mvm->queue_info_lock);
+ IWL_DEBUG_TX_QUEUES(mvm,
+ "AGG for tid %d will be on queue #%d\n",
+ tid, txq_id);
+
tid_data = &mvmsta->tid_data[tid];
tid_data->ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number);
tid_data->txq_id = txq_id;
unsigned int wdg_timeout =
iwl_mvm_get_wd_timeout(mvm, vif, sta->tdls, false);
int queue, ret;
+ bool alloc_queue = true;
u16 ssn;
struct iwl_trans_txq_scd_cfg cfg = {
cfg.fifo = iwl_mvm_ac_to_tx_fifo[tid_to_mac80211_ac[tid]];
- iwl_mvm_enable_txq(mvm, queue, vif->hw_queue[tid_to_mac80211_ac[tid]],
- ssn, &cfg, wdg_timeout);
+ /* In DQA mode, the existing queue might need to be reconfigured */
+ if (iwl_mvm_is_dqa_supported(mvm)) {
+ spin_lock_bh(&mvm->queue_info_lock);
+ /* Maybe there is no need to even alloc a queue... */
+ if (mvm->queue_info[queue].status == IWL_MVM_QUEUE_READY)
+ alloc_queue = false;
+ spin_unlock_bh(&mvm->queue_info_lock);
+
+ /*
+ * Only reconfig the SCD for the queue if the window size has
+ * changed from current (become smaller)
+ */
+ if (!alloc_queue && buf_size < mvmsta->max_agg_bufsize) {
+ /*
+ * If reconfiguring an existing queue, it first must be
+ * drained
+ */
+ ret = iwl_trans_wait_tx_queue_empty(mvm->trans,
+ BIT(queue));
+ if (ret) {
+ IWL_ERR(mvm,
+ "Error draining queue before reconfig\n");
+ return ret;
+ }
+
+ ret = iwl_mvm_reconfig_scd(mvm, queue, cfg.fifo,
+ mvmsta->sta_id, tid,
+ buf_size, ssn);
+ if (ret) {
+ IWL_ERR(mvm,
+ "Error reconfiguring TXQ #%d\n", queue);
+ return ret;
+ }
+ }
+ }
+
+ if (alloc_queue)
+ iwl_mvm_enable_txq(mvm, queue,
+ vif->hw_queue[tid_to_mac80211_ac[tid]], ssn,
+ &cfg, wdg_timeout);
ret = iwl_mvm_sta_tx_agg(mvm, sta, tid, queue, true);
if (ret)
/* No need to mark as reserved */
spin_lock_bh(&mvm->queue_info_lock);
- mvm->queue_info[queue].setup_reserved = false;
+ mvm->queue_info[queue].status = IWL_MVM_QUEUE_READY;
spin_unlock_bh(&mvm->queue_info_lock);
/*
mvmsta->agg_tids &= ~BIT(tid);
- /* No need to mark as reserved anymore */
spin_lock_bh(&mvm->queue_info_lock);
- mvm->queue_info[txq_id].setup_reserved = false;
+ /*
+ * The TXQ is marked as reserved only if no traffic came through yet
+ * This means no traffic has been sent on this TID (agg'd or not), so
+ * we no longer have use for the queue. Since it hasn't even been
+ * allocated through iwl_mvm_enable_txq, so we can just mark it back as
+ * free.
+ */
+ if (mvm->queue_info[txq_id].status == IWL_MVM_QUEUE_RESERVED)
+ mvm->queue_info[txq_id].status = IWL_MVM_QUEUE_FREE;
spin_unlock_bh(&mvm->queue_info_lock);
switch (tid_data->state) {
iwl_mvm_sta_tx_agg(mvm, sta, tid, txq_id, false);
- iwl_mvm_disable_txq(mvm, txq_id,
- vif->hw_queue[tid_to_mac80211_ac[tid]], tid,
- 0);
+ if (!iwl_mvm_is_dqa_supported(mvm)) {
+ int mac_queue = vif->hw_queue[tid_to_mac80211_ac[tid]];
+
+ iwl_mvm_disable_txq(mvm, txq_id, mac_queue, tid, 0);
+ }
return 0;
case IWL_AGG_STARTING:
case IWL_EMPTYING_HW_QUEUE_ADDBA:
mvmsta->agg_tids &= ~BIT(tid);
spin_unlock_bh(&mvmsta->lock);
- /* No need to mark as reserved */
spin_lock_bh(&mvm->queue_info_lock);
- mvm->queue_info[txq_id].setup_reserved = false;
+ /*
+ * The TXQ is marked as reserved only if no traffic came through yet
+ * This means no traffic has been sent on this TID (agg'd or not), so
+ * we no longer have use for the queue. Since it hasn't even been
+ * allocated through iwl_mvm_enable_txq, so we can just mark it back as
+ * free.
+ */
+ if (mvm->queue_info[txq_id].status == IWL_MVM_QUEUE_RESERVED)
+ mvm->queue_info[txq_id].status = IWL_MVM_QUEUE_FREE;
spin_unlock_bh(&mvm->queue_info_lock);
if (old_state >= IWL_AGG_ON) {
iwl_mvm_sta_tx_agg(mvm, sta, tid, txq_id, false);
- iwl_mvm_disable_txq(mvm, tid_data->txq_id,
- vif->hw_queue[tid_to_mac80211_ac[tid]], tid,
- 0);
+ if (!iwl_mvm_is_dqa_supported(mvm)) {
+ int mac_queue = vif->hw_queue[tid_to_mac80211_ac[tid]];
+
+ iwl_mvm_disable_txq(mvm, tid_data->txq_id, mac_queue,
+ tid, 0);
+ }
}
return 0;
for (i = minq; i <= maxq; i++)
if (mvm->queue_info[i].hw_queue_refcount == 0 &&
- !mvm->queue_info[i].setup_reserved)
+ mvm->queue_info[i].status == IWL_MVM_QUEUE_FREE)
return i;
return -ENOSPC;
}
+int iwl_mvm_reconfig_scd(struct iwl_mvm *mvm, int queue, int fifo, int sta_id,
+ int tid, int frame_limit, u16 ssn)
+{
+ struct iwl_scd_txq_cfg_cmd cmd = {
+ .scd_queue = queue,
+ .enable = 1,
+ .window = frame_limit,
+ .sta_id = sta_id,
+ .ssn = cpu_to_le16(ssn),
+ .tx_fifo = fifo,
+ .aggregate = (queue >= IWL_MVM_DQA_MIN_DATA_QUEUE ||
+ queue == IWL_MVM_DQA_BSS_CLIENT_QUEUE),
+ .tid = tid,
+ };
+ int ret;
+
+ spin_lock_bh(&mvm->queue_info_lock);
+ if (WARN(mvm->queue_info[queue].hw_queue_refcount == 0,
+ "Trying to reconfig unallocated queue %d\n", queue)) {
+ spin_unlock_bh(&mvm->queue_info_lock);
+ return -ENXIO;
+ }
+ spin_unlock_bh(&mvm->queue_info_lock);
+
+ IWL_DEBUG_TX_QUEUES(mvm, "Reconfig SCD for TXQ #%d\n", queue);
+
+ ret = iwl_mvm_send_cmd_pdu(mvm, SCD_QUEUE_CFG, 0, sizeof(cmd), &cmd);
+ WARN_ONCE(ret, "Failed to re-configure queue %d on FIFO %d, ret=%d\n",
+ queue, fifo, ret);
+
+ return ret;
+}
+
void iwl_mvm_enable_txq(struct iwl_mvm *mvm, int queue, int mac80211_queue,
u16 ssn, const struct iwl_trans_txq_scd_cfg *cfg,
unsigned int wdg_timeout)
mvm->queue_info[queue].hw_queue_refcount--;
cmd.enable = mvm->queue_info[queue].hw_queue_refcount ? 1 : 0;
+ if (!cmd.enable)
+ mvm->queue_info[queue].status = IWL_MVM_QUEUE_FREE;
IWL_DEBUG_TX_QUEUES(mvm,
"Disabling TXQ #%d refcount=%d (mac80211 map:0x%x)\n",
projects / openwrt / staging / blogic.git / commitdiff