usb: dwc3: gadget: properly increment dequeue pointer on ep_dequeue
authorFelipe Balbi <felipe.balbi@linux.intel.com>
Fri, 17 Feb 2017 09:12:44 +0000 (11:12 +0200)
committerFelipe Balbi <felipe.balbi@linux.intel.com>
Mon, 6 Mar 2017 08:09:37 +0000 (10:09 +0200)
If request was already started, this means we had to
stop the transfer. With that we also need to ignore
all TRBs used by the request, however TRBs can only
be modified after completion of END_TRANSFER
command. So what we have to do here is wait for
END_TRANSFER completion and only after that jump
over TRBs by clearing HWO and incrementing dequeue
pointer.

Note that we have 2 possible types of transfers
here:

i) Linear buffer request
ii) SG-list based request

SG-list based requests will have r->num_pending_sgs
set to a valid number (> 0). Linear requests,
normally use a single TRB.

For each of these two cases, if r->unaligned flag is
set, one extra TRB has been used to align transfer
size to wMaxPacketSize.

All of these cases need to be taken into
consideration so we don't mess up our TRB ring
pointers.

Tested-by: Janusz Dziedzic <januszx.dziedzic@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
drivers/usb/dwc3/gadget.c

index 4db97ecae8859ba0bc03c91c4948fc7af205390f..f875b3f4b0ec38db6b0c786b964a6e2e1ec013f1 100644 (file)
@@ -1342,6 +1342,68 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
                if (r == req) {
                        /* wait until it is processed */
                        dwc3_stop_active_transfer(dwc, dep->number, true);
+
+                       /*
+                        * If request was already started, this means we had to
+                        * stop the transfer. With that we also need to ignore
+                        * all TRBs used by the request, however TRBs can only
+                        * be modified after completion of END_TRANSFER
+                        * command. So what we do here is that we wait for
+                        * END_TRANSFER completion and only after that, we jump
+                        * over TRBs by clearing HWO and incrementing dequeue
+                        * pointer.
+                        *
+                        * Note that we have 2 possible types of transfers here:
+                        *
+                        * i) Linear buffer request
+                        * ii) SG-list based request
+                        *
+                        * SG-list based requests will have r->num_pending_sgs
+                        * set to a valid number (> 0). Linear requests,
+                        * normally use a single TRB.
+                        *
+                        * For each of these two cases, if r->unaligned flag is
+                        * set, one extra TRB has been used to align transfer
+                        * size to wMaxPacketSize.
+                        *
+                        * All of these cases need to be taken into
+                        * consideration so we don't mess up our TRB ring
+                        * pointers.
+                        */
+                       wait_event_lock_irq(dep->wait_end_transfer,
+                                       !(dep->flags & DWC3_EP_END_TRANSFER_PENDING),
+                                       dwc->lock);
+
+                       if (!r->trb)
+                               goto out1;
+
+                       if (r->num_pending_sgs) {
+                               struct dwc3_trb *trb;
+                               int i = 0;
+
+                               for (i = 0; i < r->num_pending_sgs; i++) {
+                                       trb = r->trb + i;
+                                       trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+                                       dwc3_ep_inc_deq(dep);
+                               }
+
+                               if (r->unaligned) {
+                                       trb = r->trb + r->num_pending_sgs + 1;
+                                       trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+                                       dwc3_ep_inc_deq(dep);
+                               }
+                       } else {
+                               struct dwc3_trb *trb = r->trb;
+
+                               trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+                               dwc3_ep_inc_deq(dep);
+
+                               if (r->unaligned) {
+                                       trb = r->trb + 1;
+                                       trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+                                       dwc3_ep_inc_deq(dep);
+                               }
+                       }
                        goto out1;
                }
                dev_err(dwc->dev, "request %p was not queued to %s\n",
@@ -1352,6 +1414,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 
 out1:
        /* giveback the request */
+       dep->queued_requests--;
        dwc3_gadget_giveback(dep, req, -ECONNRESET);
 
 out0: