}
#endif
+static void enable_pll3(void)
+{
+ struct anatop_regs __iomem *anatop =
+ (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
+
+ /* make sure pll3 is enabled */
+ if ((readl(&anatop->usb1_pll_480_ctrl) &
+ BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) {
+ /* enable pll's power */
+ writel(BM_ANADIG_USB1_PLL_480_CTRL_POWER,
+ &anatop->usb1_pll_480_ctrl_set);
+ writel(0x80, &anatop->ana_misc2_clr);
+ /* wait for pll lock */
+ while ((readl(&anatop->usb1_pll_480_ctrl) &
+ BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0)
+ ;
+ /* disable bypass */
+ writel(BM_ANADIG_USB1_PLL_480_CTRL_BYPASS,
+ &anatop->usb1_pll_480_ctrl_clr);
+ /* enable pll output */
+ writel(BM_ANADIG_USB1_PLL_480_CTRL_ENABLE,
+ &anatop->usb1_pll_480_ctrl_set);
+ }
+}
+
+void enable_thermal_clk(void)
+{
+ enable_pll3();
+}
+
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
void enable_ipu_clock(void);
int enable_fec_anatop_clock(enum enet_freq freq);
void enable_enet_clk(unsigned char enable);
+void enable_thermal_clk(void);
#endif /* __ASM_ARCH_CLOCK_H */