kerneltop's MAX_COUNTERS is increased from 8 to 64(the value used by perfstat).
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
#include <linux/unistd.h>
-#ifdef __x86_64__
-# define __NR_perf_counter_open 295
-#endif
-
-#ifdef __i386__
-# define __NR_perf_counter_open 333
-#endif
-
-/*
- * Pick up some kernel type conventions:
- */
-#define __user
-#define asmlinkage
-
-typedef unsigned int __u32;
-typedef unsigned long long __u64;
-typedef long long __s64;
-
-/*
- * User-space ABI bits:
- */
-
-/*
- * Generalized performance counter event types, used by the hw_event.type
- * parameter of the sys_perf_counter_open() syscall:
- */
-enum hw_event_types {
- /*
- * Common hardware events, generalized by the kernel:
- */
- PERF_COUNT_CPU_CYCLES = 0,
- PERF_COUNT_INSTRUCTIONS = 1,
- PERF_COUNT_CACHE_REFERENCES = 2,
- PERF_COUNT_CACHE_MISSES = 3,
- PERF_COUNT_BRANCH_INSTRUCTIONS = 4,
- PERF_COUNT_BRANCH_MISSES = 5,
- PERF_COUNT_BUS_CYCLES = 6,
-
- PERF_HW_EVENTS_MAX = 7,
-
- /*
- * Special "software" counters provided by the kernel, even if
- * the hardware does not support performance counters. These
- * counters measure various physical and sw events of the
- * kernel (and allow the profiling of them as well):
- */
- PERF_COUNT_CPU_CLOCK = -1,
- PERF_COUNT_TASK_CLOCK = -2,
- PERF_COUNT_PAGE_FAULTS = -3,
- PERF_COUNT_CONTEXT_SWITCHES = -4,
- PERF_COUNT_CPU_MIGRATIONS = -5,
-
- PERF_SW_EVENTS_MIN = -6,
-};
-
-/*
- * IRQ-notification data record type:
- */
-enum perf_counter_record_type {
- PERF_RECORD_SIMPLE = 0,
- PERF_RECORD_IRQ = 1,
- PERF_RECORD_GROUP = 2,
-};
-
-/*
- * Hardware event to monitor via a performance monitoring counter:
- */
-struct perf_counter_hw_event {
- __s64 type;
-
- __u64 irq_period;
- __u64 record_type;
- __u64 read_format;
-
- __u64 disabled : 1, /* off by default */
- nmi : 1, /* NMI sampling */
- raw : 1, /* raw event type */
- inherit : 1, /* children inherit it */
- pinned : 1, /* must always be on PMU */
- exclusive : 1, /* only group on PMU */
- exclude_user : 1, /* don't count user */
- exclude_kernel : 1, /* ditto kernel */
- exclude_hv : 1, /* ditto hypervisor */
- exclude_idle : 1, /* don't count when idle */
-
- __reserved_1 : 54;
-
- __u32 extra_config_len;
- __u32 __reserved_4;
-
- __u64 __reserved_2;
- __u64 __reserved_3;
-};
-
-/*
- * Ioctls that can be done on a perf counter fd:
- */
-#define PERF_COUNTER_IOC_ENABLE _IO('$', 0)
-#define PERF_COUNTER_IOC_DISABLE _IO('$', 1)
-
-asmlinkage int sys_perf_counter_open(
-
- struct perf_counter_hw_event *hw_event_uptr __user,
- pid_t pid,
- int cpu,
- int group_fd,
- unsigned long flags)
-{
- int ret;
-
- ret = syscall(
- __NR_perf_counter_open, hw_event_uptr, pid, cpu, group_fd, flags);
-#if defined(__x86_64__) || defined(__i386__)
- if (ret < 0 && ret > -4096) {
- errno = -ret;
- ret = -1;
- }
-#endif
- return ret;
-}
+#include "perfcounters.h"
const char *event_types [] = {
"CPU cycles",
10000,
};
-/*
- * prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all
- * counters in the current task.
- */
-#define PR_TASK_PERF_COUNTERS_DISABLE 31
-#define PR_TASK_PERF_COUNTERS_ENABLE 32
-
-#define MAX_COUNTERS 8
-
static int nr_counters = -1;
static __u64 count_filter = 100;
-#define MAX_NR_CPUS 256
-
static int event_count[MAX_COUNTERS];
static unsigned long event_id[MAX_COUNTERS];
static int event_raw[MAX_COUNTERS];
--- /dev/null
+/*
+ * Ioctls that can be done on a perf counter fd:
+ */
+#define PERF_COUNTER_IOC_ENABLE _IO('$', 0)
+#define PERF_COUNTER_IOC_DISABLE _IO('$', 1)
+
+/*
+ * prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all
+ * counters in the current task.
+ */
+#define PR_TASK_PERF_COUNTERS_DISABLE 31
+#define PR_TASK_PERF_COUNTERS_ENABLE 32
+
+#define MAX_COUNTERS 64
+#define MAX_NR_CPUS 256
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/*
+ * Pick up some kernel type conventions:
+ */
+#define __user
+#define asmlinkage
+
+typedef unsigned int __u32;
+typedef unsigned long long __u64;
+typedef long long __s64;
+
+/*
+ * User-space ABI bits:
+ */
+
+/*
+ * Generalized performance counter event types, used by the hw_event.type
+ * parameter of the sys_perf_counter_open() syscall:
+ */
+enum hw_event_types {
+ /*
+ * Common hardware events, generalized by the kernel:
+ */
+ PERF_COUNT_CPU_CYCLES = 0,
+ PERF_COUNT_INSTRUCTIONS = 1,
+ PERF_COUNT_CACHE_REFERENCES = 2,
+ PERF_COUNT_CACHE_MISSES = 3,
+ PERF_COUNT_BRANCH_INSTRUCTIONS = 4,
+ PERF_COUNT_BRANCH_MISSES = 5,
+ PERF_COUNT_BUS_CYCLES = 6,
+
+ PERF_HW_EVENTS_MAX = 7,
+
+ /*
+ * Special "software" counters provided by the kernel, even if
+ * the hardware does not support performance counters. These
+ * counters measure various physical and sw events of the
+ * kernel (and allow the profiling of them as well):
+ */
+ PERF_COUNT_CPU_CLOCK = -1,
+ PERF_COUNT_TASK_CLOCK = -2,
+ PERF_COUNT_PAGE_FAULTS = -3,
+ PERF_COUNT_CONTEXT_SWITCHES = -4,
+ PERF_COUNT_CPU_MIGRATIONS = -5,
+
+ PERF_SW_EVENTS_MIN = -6,
+};
+
+/*
+ * IRQ-notification data record type:
+ */
+enum perf_counter_record_type {
+ PERF_RECORD_SIMPLE = 0,
+ PERF_RECORD_IRQ = 1,
+ PERF_RECORD_GROUP = 2,
+};
+
+/*
+ * Hardware event to monitor via a performance monitoring counter:
+ */
+struct perf_counter_hw_event {
+ __s64 type;
+
+ __u64 irq_period;
+ __u64 record_type;
+ __u64 read_format;
+
+ __u64 disabled : 1, /* off by default */
+ nmi : 1, /* NMI sampling */
+ raw : 1, /* raw event type */
+ inherit : 1, /* children inherit it */
+ pinned : 1, /* must always be on PMU */
+ exclusive : 1, /* only group on PMU */
+ exclude_user : 1, /* don't count user */
+ exclude_kernel : 1, /* ditto kernel */
+ exclude_hv : 1, /* ditto hypervisor */
+ exclude_idle : 1, /* don't count when idle */
+
+ __reserved_1 : 54;
+
+ __u32 extra_config_len;
+ __u32 __reserved_4;
+
+ __u64 __reserved_2;
+ __u64 __reserved_3;
+};
+
+#ifdef __x86_64__
+# define __NR_perf_counter_open 295
+#endif
+
+#ifdef __i386__
+# define __NR_perf_counter_open 333
+#endif
+
+#ifdef __powerpc__
+#define __NR_perf_counter_open 319
+#endif
+
+asmlinkage int sys_perf_counter_open(
+
+ struct perf_counter_hw_event *hw_event_uptr __user,
+ pid_t pid,
+ int cpu,
+ int group_fd,
+ unsigned long flags)
+{
+ int ret;
+
+ ret = syscall(
+ __NR_perf_counter_open, hw_event_uptr, pid, cpu, group_fd, flags);
+#if defined(__x86_64__) || defined(__i386__)
+ if (ret < 0 && ret > -4096) {
+ errno = -ret;
+ ret = -1;
+ }
+#endif
+ return ret;
+}
+
#include <linux/unistd.h>
-#ifdef __x86_64__
-# define __NR_perf_counter_open 295
-#endif
-
-#ifdef __i386__
-# define __NR_perf_counter_open 333
-#endif
-
-#ifdef __powerpc__
-#define __NR_perf_counter_open 319
-#endif
-
-/*
- * Pick up some kernel type conventions:
- */
-#define __user
-#define asmlinkage
-
-typedef unsigned int __u32;
-typedef unsigned long long __u64;
-typedef long long __s64;
-
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-/*
- * User-space ABI bits:
- */
-
-/*
- * Generalized performance counter event types, used by the hw_event.type
- * parameter of the sys_perf_counter_open() syscall:
- */
-enum hw_event_types {
- /*
- * Common hardware events, generalized by the kernel:
- */
- PERF_COUNT_CPU_CYCLES = 0,
- PERF_COUNT_INSTRUCTIONS = 1,
- PERF_COUNT_CACHE_REFERENCES = 2,
- PERF_COUNT_CACHE_MISSES = 3,
- PERF_COUNT_BRANCH_INSTRUCTIONS = 4,
- PERF_COUNT_BRANCH_MISSES = 5,
- PERF_COUNT_BUS_CYCLES = 6,
-
- PERF_HW_EVENTS_MAX = 7,
-
- /*
- * Special "software" counters provided by the kernel, even if
- * the hardware does not support performance counters. These
- * counters measure various physical and sw events of the
- * kernel (and allow the profiling of them as well):
- */
- PERF_COUNT_CPU_CLOCK = -1,
- PERF_COUNT_TASK_CLOCK = -2,
- PERF_COUNT_PAGE_FAULTS = -3,
- PERF_COUNT_CONTEXT_SWITCHES = -4,
- PERF_COUNT_CPU_MIGRATIONS = -5,
-
- PERF_SW_EVENTS_MIN = -6,
-};
-
-/*
- * IRQ-notification data record type:
- */
-enum perf_counter_record_type {
- PERF_RECORD_SIMPLE = 0,
- PERF_RECORD_IRQ = 1,
- PERF_RECORD_GROUP = 2,
-};
-
-/*
- * Hardware event to monitor via a performance monitoring counter:
- */
-struct perf_counter_hw_event {
- __s64 type;
-
- __u64 irq_period;
- __u64 record_type;
- __u64 read_format;
-
- __u64 disabled : 1, /* off by default */
- nmi : 1, /* NMI sampling */
- raw : 1, /* raw event type */
- inherit : 1, /* children inherit it */
- pinned : 1, /* must always be on PMU */
- exclusive : 1, /* only group on PMU */
- exclude_user : 1, /* don't count user */
- exclude_kernel : 1, /* ditto kernel */
- exclude_hv : 1, /* ditto hypervisor */
- exclude_idle : 1, /* don't count when idle */
-
- __reserved_1 : 54;
-
- __u32 extra_config_len;
- __u32 __reserved_4;
-
- __u64 __reserved_2;
- __u64 __reserved_3;
-};
-
-/*
- * Ioctls that can be done on a perf counter fd:
- */
-#define PERF_COUNTER_IOC_ENABLE _IO('$', 0)
-#define PERF_COUNTER_IOC_DISABLE _IO('$', 1)
-
-asmlinkage int sys_perf_counter_open(
-
- struct perf_counter_hw_event *hw_event_uptr __user,
- pid_t pid,
- int cpu,
- int group_fd,
- unsigned long flags)
-{
- int ret;
-
- ret = syscall(
- __NR_perf_counter_open, hw_event_uptr, pid, cpu, group_fd, flags);
-#if defined(__x86_64__) || defined(__i386__)
- if (ret < 0 && ret > -4096) {
- errno = -ret;
- ret = -1;
- }
-#endif
- return ret;
-}
-
+#include "perfcounters.h"
static char *hw_event_names [] = {
"CPU cycles",
{PERF_COUNT_CPU_MIGRATIONS, "migrations", },
};
-#define MAX_COUNTERS 64
-#define MAX_NR_CPUS 256
-
static int nr_counters = 0;
static int nr_cpus = 0;
char fault_here[1000000];
-#define PR_TASK_PERF_COUNTERS_DISABLE 31
-#define PR_TASK_PERF_COUNTERS_ENABLE 32
-
static int fd[MAX_NR_CPUS][MAX_COUNTERS];
static void create_counter(int counter)
projects / openwrt / staging / blogic.git / commitdiff