The HPD pin and RX_SENSE registers have proven to be less reliable
than using I2C on the EDID pins for detection of an HDMI monitor.
In particular, when the HDMI output is reset through a "reboot"
cycle, the detect_hdmi() routine often bounces, resulting in
a failure to detect a connected monitor.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
}
struct display_info_t const displays[] = {{
- .bus = -1,
- .addr = 0,
+ .bus = 1,
+ .addr = 0x50,
.pixfmt = IPU_PIX_FMT_RGB24,
- .detect = detect_hdmi,
+ .detect = detect_i2c,
.enable = do_enable_hdmi,
.mode = {
.name = "HDMI",