aw-nr580)
status_led="aw-nr580:green:ready"
;;
- bullet-m | rocket-m | nano-m | nanostation-m)
+ bullet-m | rocket-m | nano-m | nanostation-m | nanostation-m-xw)
status_led="ubnt:green:link4"
;;
bxu2000n-2-a1)
bullet-m | \
nanostation-m | \
-rocket-m)
+rocket-m | \
+nanostation-m-xw)
ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100" "-25" "13"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100" "-50" "13"
ucidef_add_switch_vlan "switch0" "1" "0 1 2"
;;
+nanostation-m-xw)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0t 5"
+ ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ;;
+
wrt160nl)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
*"Nanostation M")
name="nanostation-m"
;;
+ *"Nanostation M XW")
+ name="nanostation-m-xw"
+ ;;
*JWAP003)
name="jwap003"
;;
bullet-m | \
nanostation-m | \
rocket-m | \
+ nanostation-m-xw | \
rw2458n | \
wndap360 | \
wzr-hp-g300nh2 | \
-o $(call factoryname,$(1),$(2))
endef
-
+# $(4) = board (XS2, XS5, RS, XM)
+# $(5) = series (BZ, XM, XW)
+# $(6) = chip (ar7240, ar934x)
define Image/Build/UBNT2
$(eval fwsize=$(call mtdpartsize,firmware,$(3)))
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOM,ubnt-nano-m,UBNT-NM,ttyS0,115200,XM,XM,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFI,ubnt-unifi,UBNT-UF,ttyS0,115200,XM,BZ,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFIOUTDOOR,ubnt-unifi-outdoor,UBNT-U20,ttyS0,115200,XM,BZ,ar7240))
+$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOMXW,ubnt-nano-m-xw,UBNT-NM-XW,ttyS0,115200,XM,XW,ar934x))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
$(eval $(call MultiProfile,TLWR941,TLWR941NV2 TLWR941NV3 TLWR941NV4 TLWR941NV6))
$(eval $(call MultiProfile,TLWR1043,TLWR1043V1 TLWR1043V2))
$(eval $(call MultiProfile,TLWDR4300,TLWDR3500V1 TLWDR3600V1 TLWDR4300V1 TLWDR4300V1IL TLWDR4310V1 MW4530RV1))
-$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTUNIFI UBNTUNIFIOUTDOOR UAPPRO))
+$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTNANOMXW UBNTUNIFI UBNTUNIFIOUTDOOR UAPPRO))
$(eval $(call MultiProfile,WNDR3700,WNDR3700V1 WNDR3700V2 WNDR3800 WNDRMAC WNDRMACV2))
$(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
--- /dev/null
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -332,3 +332,60 @@ static void __init ubnt_uap_pro_setup(vo
+ MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
+ ubnt_uap_pro_setup);
+
++#define UBNT_XW_GPIO_LED_L1 11
++#define UBNT_XW_GPIO_LED_L2 16
++#define UBNT_XW_GPIO_LED_L3 13
++#define UBNT_XW_GPIO_LED_L4 14
++
++static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
++ {
++ .name = "ubnt:red:link1",
++ .gpio = UBNT_XW_GPIO_LED_L1,
++ .active_low = 1,
++ }, {
++ .name = "ubnt:orange:link2",
++ .gpio = UBNT_XW_GPIO_LED_L2,
++ .active_low = 1,
++ }, {
++ .name = "ubnt:green:link3",
++ .gpio = UBNT_XW_GPIO_LED_L3,
++ .active_low = 1,
++ }, {
++ .name = "ubnt:green:link4",
++ .gpio = UBNT_XW_GPIO_LED_L4,
++ .active_low = 1,
++ },
++};
++
++static void __init ubnt_nano_m_xw_setup(void)
++{
++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++ ath79_register_m25p80(NULL);
++
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
++ ubnt_xw_leds_gpio);
++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++ ARRAY_SIZE(ubnt_xm_gpio_keys),
++ ubnt_xm_gpio_keys);
++
++ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
++
++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
++ ath79_init_mac(ath79_eth0_data.mac_addr,
++ eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++ /* GMAC0 is connected to an AR8326 switch */
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
++ ath79_eth0_data.speed = SPEED_100;
++ ath79_eth0_data.duplex = DUPLEX_FULL;
++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++ ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
++ ubnt_nano_m_xw_setup);
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -124,6 +124,7 @@ enum ath79_mach_type {
+ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
+ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
++ ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */
+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
+ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
+ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */