. /lib/functions.sh
case $(board_name) in
- c-55|\
- c-60)
- mac_lan=$(mtd_get_mac_binary art 0)
- [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
- ;;
- dir-615-c1)
- fetch_mac_from_mtd config lan_mac wan_mac
- ;;
- dir-615-i1)
- fetch_mac_from_mtd nvram sys_lan_mac sys_wan_mac
- ;;
- mr18)
- mac_lan=$(mtd_get_mac_binary_ubi board-config 102)
- [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
- ;;
- r6100)
- mac_lan=$(mtd_get_mac_binary caldata 0)
- [ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
- mac_wan=$(mtd_get_mac_binary caldata 6)
- [ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan"
- ;;
- rambutan)
- mac_lan=$(mtd_get_mac_binary art 0)
- [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
- mac_wan=$(mtd_get_mac_binary art 6)
- [ -n "$mac_wan" ] && ifconfig eth1 hw ether "$mac_wan"
- ;;
- tew-632brp)
- fetch_mac_from_mtd config lan_mac wan_mac
- ;;
- wrt160nl)
- fetch_mac_from_mtd nvram lan_hwaddr wan_hwaddr
- ;;
- z1)
- mac_lan=$(mtd_get_mac_binary_ubi board-config 102)
- [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
- ;;
+ c-55|\
+ c-60)
+ mac_lan=$(mtd_get_mac_binary art 0)
+ [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
+ ;;
+ dir-615-c1|\
+ tew-632brp)
+ fetch_mac_from_mtd config lan_mac wan_mac
+ ;;
+ dir-615-i1)
+ fetch_mac_from_mtd nvram sys_lan_mac sys_wan_mac
+ ;;
+ mr18|\
+ z1)
+ mac_lan=$(mtd_get_mac_binary_ubi board-config 102)
+ [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
+ ;;
+ r6100)
+ mac_lan=$(mtd_get_mac_binary caldata 0)
+ [ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
+ mac_wan=$(mtd_get_mac_binary caldata 6)
+ [ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan"
+ ;;
+ rambutan)
+ mac_lan=$(mtd_get_mac_binary art 0)
+ [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
+ mac_wan=$(mtd_get_mac_binary art 6)
+ [ -n "$mac_wan" ] && ifconfig eth1 hw ether "$mac_wan"
+ ;;
+ wrt160nl)
+ fetch_mac_from_mtd nvram lan_hwaddr wan_hwaddr
+ ;;
esac
}
local firmware_file="/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin"
# bail out if firmware does not exist
- [ -f "$firmware_file" ] || {
- return
- }
+ [ -f "$firmware_file" ] || return
local mac_offset=276
local mac_length=6
local current_mac="$(hexdump -v -n $mac_length -s $mac_offset -e '5/1 "%02x:" 1/1 "%02x"' $firmware_file 2>/dev/null)"
# check if mac address was already patched
- [ "$default_mac" = "$current_mac" ] || {
- return
- }
+ [ "$default_mac" = "$current_mac" ] || return
# some boards have bogus mac in otp (= directly in the PCIe card's EEPROM).
# we have to patch the default mac in the firmware because we cannot change
# the otp.
case $(board_name) in
- dgl-5500-a1 | tew-823dru)
- local mac
- mac=$(mtd_get_mac_ascii nvram wlan1_mac)
-
- cp $firmware_file /tmp/ath10k-firmware.bin
- macaddr_2bin $mac | dd of=/tmp/ath10k-firmware.bin \
- conv=notrunc bs=1 seek=$mac_offset count=$mac_length
-
+ dgl-5500-a1|\
+ tew-823dru)
+ local mac
+ mac=$(mtd_get_mac_ascii nvram wlan1_mac)
+
+ cp $firmware_file /tmp/ath10k-firmware.bin
+ macaddr_2bin $mac | dd of=/tmp/ath10k-firmware.bin \
+ conv=notrunc bs=1 seek=$mac_offset count=$mac_length
;;
esac
- [ -f /tmp/ath10k-firmware.bin ] || {
- return
- }
+
+ [ -f /tmp/ath10k-firmware.bin ] || return
+
cp /tmp/ath10k-firmware.bin $firmware_file
rm /tmp/ath10k-firmware.bin
}
check_patch_ath10k_firmware() {
case $(board_name) in
- dgl-5500-a1 | tew-823dru)
- do_patch_ath10k_firmware
+ dgl-5500-a1|\
+ tew-823dru)
+ do_patch_ath10k_firmware
;;
esac
}