layerscape: enable spi-uart in LS1012A-FRDM

This patch add missing support of SC16IS740 serial controller, installed
on LS1012A-FRDM board.

It was required to change RCW bits, because SPI was disabled by default.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

diff --git a/package/firmware/layerscape/ls-rcw/Makefile b/package/firmware/layerscape/ls-rcw/Makefile
index 3853c9c3fb1bfef7f525894ea23dac348c8e48c7..6245e89633da17ba3b9f7084ad19c0afb85c4a9a 100644 (file)
--- a/package/firmware/layerscape/ls-rcw/Makefile
+++ b/package/firmware/layerscape/ls-rcw/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-rcw
 PKG_VERSION:=LSDK-20.04-update-290520
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/rcw

diff --git a/package/firmware/layerscape/ls-rcw/patches/0002-fix_rcw_for_ls1012a-frdm.patch b/package/firmware/layerscape/ls-rcw/patches/0002-fix_rcw_for_ls1012a-frdm.patch
new file mode 100644 (file)
index 0000000..66b4df9
--- /dev/null
+++ b/package/firmware/layerscape/ls-rcw/patches/0002-fix_rcw_for_ls1012a-frdm.patch
@@ -0,0 +1,13 @@
+--- a/ls1012afrdm/N_SSNP_3305/rcw_800.rcw
++++ b/ls1012afrdm/N_SSNP_3305/rcw_800.rcw
+@@ -41,8 +41,8 @@ EC1_EXT_SAI2_RX=1
+ EC1_BASE=0
+ UART1_BASE=1
+ SDHC1_BASE=1
+-SDHC2_BASE_DAT321=1
+-SDHC2_BASE_BASE=1
++SDHC2_BASE_DAT321=3
++SDHC2_BASE_BASE=3
+ UART2_BASE_DATA=1
+ EMI1_BASE=1
+ CLK_OUT_BASE=1

diff --git a/target/linux/layerscape/armv8_64b/config-5.4 b/target/linux/layerscape/armv8_64b/config-5.4
index 8c398f4a2b177d04ce462ea795a5676a49afe2c0..026cf15673a0e89fb4e3541b594e38e2c845bb15 100644 (file)
--- a/target/linux/layerscape/armv8_64b/config-5.4
+++ b/target/linux/layerscape/armv8_64b/config-5.4
@@ -842,6 +842,10 @@ CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_SERIAL_MCTRL_GPIO=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_SC16IS7XX=y
+CONFIG_SERIAL_SC16IS7XX_CORE=y
+# CONFIG_SERIAL_SC16IS7XX_I2C is not set
+CONFIG_SERIAL_SC16IS7XX_SPI=y
 CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_SERIO=y

diff --git a/target/linux/layerscape/patches-5.4/902-layerscape_improve_support_of_LS1012A-FRDM.patch b/target/linux/layerscape/patches-5.4/902-layerscape_improve_support_of_LS1012A-FRDM.patch
new file mode 100644 (file)
index 0000000..62edf43
--- /dev/null
+++ b/target/linux/layerscape/patches-5.4/902-layerscape_improve_support_of_LS1012A-FRDM.patch
@@ -0,0 +1,58 @@
+From 12de4b5e7cbcd193d5abb753ca511fe8f2236846 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Fri, 13 Nov 2020 07:30:03 +0100
+Subject: [PATCH 2/2] arm64: dts: fsl-ls1012a-frdm: add spi-uart device
+
+This patch adds spi-uart controller  to LS1012A-FRDM board dts.
+Device is equipped in SC16IS740 from NXP.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ .../boot/dts/freescale/fsl-ls1012a-frdm.dts   | 21 +++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+
+--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
++++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+@@ -7,6 +7,7 @@
+  */
+ /dts-v1/;
+ 
++#include <dt-bindings/interrupt-controller/irq.h>
+ #include "fsl-ls1012a.dtsi"
+ 
+ / {
+@@ -16,6 +17,7 @@
+       aliases {
+               ethernet0 = &pfe_mac0;
+               ethernet1 = &pfe_mac1;
++              serial0 = &duart0;
+       };
+ 
+       sys_mclk: clock-mclk {
+@@ -61,6 +63,26 @@
+               };
+       };
+ };
++
++&dspi {
++      status = "okay";
++      bus-num = <0>;
++
++      serial@0 {
++              reg = <0>;
++              compatible = "nxp,sc16is740";
++              spi-max-frequency = <4000000>;
++              clocks = <&sc16is7xx_clk>;
++              interrupt-parent = <&gpio1>;
++              interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
++
++              sc16is7xx_clk: sc16is7xx_clk {
++                      compatible = "fixed-clock";
++                      #clock-cells = <0>;
++                      clock-frequency = <24000000>;
++              };
++      };
++};
+ 
+ &duart0 {
+       status = "okay";