#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
-#define VERSION "0.6"
+#define VERSION "0.7"
static bool disable_scofix;
static bool force_scofix;
#define BTUSB_BCM_PATCHRAM 0x400
#define BTUSB_MARVELL 0x800
#define BTUSB_SWAVE 0x1000
+#define BTUSB_INTEL_NEW 0x2000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
/* Intel Bluetooth device */
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
+ { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
/* Marvell device */
{ USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
#define BTUSB_ISOC_RUNNING 2
#define BTUSB_SUSPENDING 3
#define BTUSB_DID_ISO_RESUME 4
+#define BTUSB_BOOTLOADER 5
+#define BTUSB_DOWNLOADING 6
+#define BTUSB_BOOTING 7
+#define BTUSB_FIRMWARE_FAILED 8
struct btusb_data {
struct hci_dev *hdev;
u8 fw_patch_num;
} __packed;
+struct intel_boot_params {
+ __u8 status;
+ __u8 otp_format;
+ __u8 otp_content;
+ __u8 otp_patch;
+ __le16 dev_revid;
+ __u8 secure_boot;
+ __u8 key_from_hdr;
+ __u8 key_type;
+ __u8 otp_lock;
+ __u8 api_lock;
+ __u8 debug_lock;
+ bdaddr_t otp_bdaddr;
+ __u8 min_fw_build_nn;
+ __u8 min_fw_build_cw;
+ __u8 min_fw_build_yy;
+ __u8 limited_cce;
+ __u8 unlocked_state;
+} __packed;
+
static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
struct intel_version *ver)
{
return 0;
}
+static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
+{
+ struct sk_buff *skb;
+ struct hci_event_hdr *hdr;
+ struct hci_ev_cmd_complete *evt;
+
+ skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+
+ hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
+ hdr->evt = HCI_EV_CMD_COMPLETE;
+ hdr->plen = sizeof(*evt) + 1;
+
+ evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
+ evt->ncmd = 0x01;
+ evt->opcode = cpu_to_le16(opcode);
+
+ *skb_put(skb, 1) = 0x00;
+
+ bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
+
+ return hci_recv_frame(hdev, skb);
+}
+
+static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
+ int count)
+{
+ /* When the device is in bootloader mode, then it can send
+ * events via the bulk endpoint. These events are treated the
+ * same way as the ones received from the interrupt endpoint.
+ */
+ if (test_bit(BTUSB_BOOTLOADER, &data->flags))
+ return btusb_recv_intr(data, buffer, count);
+
+ return btusb_recv_bulk(data, buffer, count);
+}
+
+static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+
+ if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
+ struct hci_event_hdr *hdr = (void *)skb->data;
+
+ /* When the firmware loading completes the device sends
+ * out a vendor specific event indicating the result of
+ * the firmware loading.
+ */
+ if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
+ skb->data[2] == 0x06) {
+ if (skb->data[3] != 0x00)
+ test_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
+
+ if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags))
+ wake_up_interruptible(&hdev->req_wait_q);
+ }
+
+ /* When switching to the operational firmware the device
+ * sends a vendor specific event indicating that the bootup
+ * completed.
+ */
+ if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
+ skb->data[2] == 0x02) {
+ if (test_and_clear_bit(BTUSB_BOOTING, &data->flags))
+ wake_up_interruptible(&hdev->req_wait_q);
+ }
+ }
+
+ return hci_recv_frame(hdev, skb);
+}
+
+static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ struct urb *urb;
+
+ BT_DBG("%s", hdev->name);
+
+ if (!test_bit(HCI_RUNNING, &hdev->flags))
+ return -EBUSY;
+
+ switch (bt_cb(skb)->pkt_type) {
+ case HCI_COMMAND_PKT:
+ if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
+ struct hci_command_hdr *cmd = (void *)skb->data;
+ __u16 opcode = le16_to_cpu(cmd->opcode);
+
+ /* When in bootloader mode and the command 0xfc09
+ * is received, it needs to be send down the
+ * bulk endpoint. So allocate a bulk URB instead.
+ */
+ if (opcode == 0xfc09)
+ urb = alloc_bulk_urb(hdev, skb);
+ else
+ urb = alloc_ctrl_urb(hdev, skb);
+
+ /* When the 0xfc01 command is issued to boot into
+ * the operational firmware, it will actually not
+ * send a command complete event. To keep the flow
+ * control working inject that event here.
+ */
+ if (opcode == 0xfc01)
+ inject_cmd_complete(hdev, opcode);
+ } else {
+ urb = alloc_ctrl_urb(hdev, skb);
+ }
+ if (IS_ERR(urb))
+ return PTR_ERR(urb);
+
+ hdev->stat.cmd_tx++;
+ return submit_or_queue_tx_urb(hdev, urb);
+
+ case HCI_ACLDATA_PKT:
+ urb = alloc_bulk_urb(hdev, skb);
+ if (IS_ERR(urb))
+ return PTR_ERR(urb);
+
+ hdev->stat.acl_tx++;
+ return submit_or_queue_tx_urb(hdev, urb);
+
+ case HCI_SCODATA_PKT:
+ if (hci_conn_num(hdev, SCO_LINK) < 1)
+ return -ENODEV;
+
+ urb = alloc_isoc_urb(hdev, skb);
+ if (IS_ERR(urb))
+ return PTR_ERR(urb);
+
+ hdev->stat.sco_tx++;
+ return submit_tx_urb(hdev, urb);
+ }
+
+ return -EILSEQ;
+}
+
+static int btusb_intel_secure_send(struct hci_dev *hdev, u8 fragment_type,
+ u32 plen, const void *param)
+{
+ while (plen > 0) {
+ struct sk_buff *skb;
+ u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
+
+ cmd_param[0] = fragment_type;
+ memcpy(cmd_param + 1, param, fragment_len);
+
+ skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
+ cmd_param, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+
+ plen -= fragment_len;
+ param += fragment_len;
+ }
+
+ return 0;
+}
+
+static void btusb_intel_version_info(struct hci_dev *hdev,
+ struct intel_version *ver)
+{
+ const char *variant;
+
+ switch (ver->fw_variant) {
+ case 0x06:
+ variant = "Bootloader";
+ break;
+ case 0x23:
+ variant = "Firmware";
+ break;
+ default:
+ return;
+ }
+
+ BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev->name,
+ variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
+ ver->fw_build_num, ver->fw_build_ww, 2000 + ver->fw_build_yy);
+}
+
+static int btusb_setup_intel_new(struct hci_dev *hdev)
+{
+ static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
+ 0x00, 0x08, 0x04, 0x00 };
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ struct sk_buff *skb;
+ struct intel_version *ver;
+ struct intel_boot_params *params;
+ const struct firmware *fw;
+ const u8 *fw_ptr;
+ char fwname[64];
+ ktime_t calltime, delta, rettime;
+ unsigned long long duration;
+ int err;
+
+ BT_DBG("%s", hdev->name);
+
+ calltime = ktime_get();
+
+ /* Read the Intel version information to determine if the device
+ * is in bootloader mode or if it already has operational firmware
+ * loaded.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Reading Intel version information failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*ver)) {
+ BT_ERR("%s: Intel version event size mismatch", hdev->name);
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ ver = (struct intel_version *)skb->data;
+ if (ver->status) {
+ BT_ERR("%s: Intel version command failure (%02x)",
+ hdev->name, ver->status);
+ err = -bt_to_errno(ver->status);
+ kfree_skb(skb);
+ return err;
+ }
+
+ /* The hardware platform number has a fixed value of 0x37 and
+ * for now only accept this single value.
+ */
+ if (ver->hw_platform != 0x37) {
+ BT_ERR("%s: Unsupported Intel hardware platform (%u)",
+ hdev->name, ver->hw_platform);
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
+ * supported by this firmware loading method. This check has been
+ * put in place to ensure correct forward compatibility options
+ * when newer hardware variants come along.
+ */
+ if (ver->hw_variant != 0x0b) {
+ BT_ERR("%s: Unsupported Intel hardware variant (%u)",
+ hdev->name, ver->hw_variant);
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ btusb_intel_version_info(hdev, ver);
+
+ /* The firmware variant determines if the device is in bootloader
+ * mode or is running operational firmware. The value 0x06 identifies
+ * the bootloader and the value 0x23 identifies the operational
+ * firmware.
+ *
+ * When the operational firmware is already present, then only
+ * the check for valid Bluetooth device address is needed. This
+ * determines if the device will be added as configured or
+ * unconfigured controller.
+ *
+ * It is not possible to use the Secure Boot Parameters in this
+ * case since that command is only available in bootloader mode.
+ */
+ if (ver->fw_variant == 0x23) {
+ kfree_skb(skb);
+ clear_bit(BTUSB_BOOTLOADER, &data->flags);
+ btusb_check_bdaddr_intel(hdev);
+ return 0;
+ }
+
+ /* If the device is not in bootloader mode, then the only possible
+ * choice is to return an error and abort the device initialization.
+ */
+ if (ver->fw_variant != 0x06) {
+ BT_ERR("%s: Unsupported Intel firmware variant (%u)",
+ hdev->name, ver->fw_variant);
+ kfree_skb(skb);
+ return -ENODEV;
+ }
+
+ kfree_skb(skb);
+
+ /* Read the secure boot parameters to identify the operating
+ * details of the bootloader.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*params)) {
+ BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ params = (struct intel_boot_params *)skb->data;
+ if (params->status) {
+ BT_ERR("%s: Intel boot parameters command failure (%02x)",
+ hdev->name, params->status);
+ err = -bt_to_errno(params->status);
+ kfree_skb(skb);
+ return err;
+ }
+
+ BT_INFO("%s: Device revision is %u", hdev->name,
+ le16_to_cpu(params->dev_revid));
+
+ BT_INFO("%s: Secure boot is %s", hdev->name,
+ params->secure_boot ? "enabled" : "disabled");
+
+ BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
+ params->min_fw_build_nn, params->min_fw_build_cw,
+ 2000 + params->min_fw_build_yy);
+
+ /* It is required that every single firmware fragment is acknowledged
+ * with a command complete event. If the boot parameters indicate
+ * that this bootloader does not send them, then abort the setup.
+ */
+ if (params->limited_cce != 0x00) {
+ BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
+ hdev->name, params->limited_cce);
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ /* If the OTP has no valid Bluetooth device address, then there will
+ * also be no valid address for the operational firmware.
+ */
+ if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
+ BT_INFO("%s: No device address configured", hdev->name);
+ set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+ }
+
+ /* With this Intel bootloader only the hardware variant and device
+ * revision information are used to select the right firmware.
+ *
+ * Currently this bootloader support is limited to hardware variant
+ * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
+ */
+ snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
+ le16_to_cpu(params->dev_revid));
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ BT_ERR("%s: Failed to load Intel firmware file (%d)",
+ hdev->name, err);
+ kfree_skb(skb);
+ return err;
+ }
+
+ BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
+
+ kfree_skb(skb);
+
+ if (fw->size < 644) {
+ BT_ERR("%s: Invalid size of firmware file (%zu)",
+ hdev->name, fw->size);
+ err = -EBADF;
+ goto done;
+ }
+
+ set_bit(BTUSB_DOWNLOADING, &data->flags);
+
+ /* Start the firmware download transaction with the Init fragment
+ * represented by the 128 bytes of CSS header.
+ */
+ err = btusb_intel_secure_send(hdev, 0x00, 128, fw->data);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware header (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ /* Send the 256 bytes of public key information from the firmware
+ * as the PKey fragment.
+ */
+ err = btusb_intel_secure_send(hdev, 0x03, 256, fw->data + 128);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware public key (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ /* Send the 256 bytes of signature information from the firmware
+ * as the Sign fragment.
+ */
+ err = btusb_intel_secure_send(hdev, 0x02, 256, fw->data + 388);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware signature (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ fw_ptr = fw->data + 644;
+
+ while (fw_ptr - fw->data < fw->size) {
+ struct hci_command_hdr *cmd = (void *)fw_ptr;
+ u8 cmd_len;
+
+ cmd_len = sizeof(*cmd) + cmd->plen;
+
+ /* Send each command from the firmware data buffer as
+ * a single Data fragment.
+ */
+ err = btusb_intel_secure_send(hdev, 0x01, cmd_len, fw_ptr);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware data (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ fw_ptr += cmd_len;
+ }
+
+ /* Before switching the device into operational mode and with that
+ * booting the loaded firmware, wait for the bootloader notification
+ * that all fragments have been successfully received.
+ *
+ * When the event processing receives the notification, then this
+ * flag will be cleared. So just in case that happens really quickly,
+ * check it first before adding the wait queue.
+ */
+ if (test_bit(BTUSB_DOWNLOADING, &data->flags)) {
+ DECLARE_WAITQUEUE(wait, current);
+ signed long timeout;
+
+ BT_INFO("%s: Waiting for firmware download to complete",
+ hdev->name);
+
+ add_wait_queue(&hdev->req_wait_q, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /* The firmware loading should not take longer than 5 seconds
+ * and thus just timeout if that happens and fail the setup
+ * of this device.
+ */
+ timeout = schedule_timeout(msecs_to_jiffies(5000));
+
+ remove_wait_queue(&hdev->req_wait_q, &wait);
+
+ if (signal_pending(current)) {
+ BT_ERR("%s: Firmware loading interrupted", hdev->name);
+ err = -EINTR;
+ goto done;
+ }
+
+ if (!timeout) {
+ BT_ERR("%s: Firmware loading timeout", hdev->name);
+ err = -ETIMEDOUT;
+ goto done;
+ }
+ }
+
+ if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
+ BT_ERR("%s: Firmware loading failed", hdev->name);
+ err = -ENOEXEC;
+ goto done;
+ }
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);
+
+done:
+ release_firmware(fw);
+
+ if (err < 0)
+ return err;
+
+ calltime = ktime_get();
+
+ set_bit(BTUSB_BOOTING, &data->flags);
+
+ skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+
+ /* The bootloader will not indicate when the device is ready. This
+ * is done by the operational firmware sending bootup notification.
+ */
+ if (test_bit(BTUSB_BOOTING, &data->flags)) {
+ DECLARE_WAITQUEUE(wait, current);
+ signed long timeout;
+
+ BT_INFO("%s: Waiting for device to boot", hdev->name);
+
+ add_wait_queue(&hdev->req_wait_q, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /* Booting into operational firmware should not take
+ * longer than 1 second. However if that happens, then
+ * just fail the setup since something went wrong.
+ */
+ timeout = schedule_timeout(msecs_to_jiffies(1000));
+
+ remove_wait_queue(&hdev->req_wait_q, &wait);
+
+ if (signal_pending(current)) {
+ BT_ERR("%s: Device boot interrupted", hdev->name);
+ return -EINTR;
+ }
+
+ if (!timeout) {
+ BT_ERR("%s: Device boot timeout", hdev->name);
+ return -ETIMEDOUT;
+ }
+ }
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
+
+ clear_bit(BTUSB_BOOTLOADER, &data->flags);
+
+ return 0;
+}
+
static int btusb_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
struct sk_buff *skb;
init_usb_anchor(&data->isoc_anchor);
spin_lock_init(&data->rxlock);
- data->recv_event = hci_recv_frame;
- data->recv_bulk = btusb_recv_bulk;
+ if (id->driver_info & BTUSB_INTEL_NEW) {
+ data->recv_event = btusb_recv_event_intel;
+ data->recv_bulk = btusb_recv_bulk_intel;
+ set_bit(BTUSB_BOOTLOADER, &data->flags);
+ } else {
+ data->recv_event = hci_recv_frame;
+ data->recv_bulk = btusb_recv_bulk;
+ }
hdev = hci_alloc_dev();
if (!hdev)
hdev->set_bdaddr = btusb_set_bdaddr_intel;
}
+ if (id->driver_info & BTUSB_INTEL_NEW) {
+ hdev->send = btusb_send_frame_intel;
+ hdev->setup = btusb_setup_intel_new;
+ hdev->set_bdaddr = btusb_set_bdaddr_intel;
+ }
+
if (id->driver_info & BTUSB_MARVELL)
hdev->set_bdaddr = btusb_set_bdaddr_marvell;
projects / openwrt / staging / blogic.git / commitdiff