select ADM5120_OEM_MIKROTIK
default y
+config ADM5120_MACH_PMUGW
+ bool "Motorola Powerline MU Gateway"
+ depends on CPU_LITTLE_ENDIAN
+ select ADM5120_SOC_BGA
+ select ADM5120_OEM_MOTOROLA
+ default y
+
config ADM5120_MACH_P_334WT
bool "ZyXEL Prestige 334WT"
depends on CPU_BIG_ENDIAN
config ADM5120_OEM_MIKROTIK
def_bool n
+config ADM5120_OEM_MOTOROLA
+ def_bool n
+
config ADM5120_OEM_ZYXEL
def_bool n
DEFBOARD("153", MACH_ADM5120_RB_153),
DEFBOARD("192", MACH_ADM5120_RB_192),
DEFBOARD("miniROUTER", MACH_ADM5120_RB_150),
+ /* Motorola boards */
+ DEFBOARD("Powerline MU Gateway",MACH_ADM5120_PMUGW),
};
static unsigned long __init find_machtype_byname(char *name)
--- /dev/null
+obj-$(CONFIG_ADM5120_MACH_PMUGW) += pmugw.o
--- /dev/null
+/*
+ * Motorola Powerline MU Gateway board
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/etherdevice.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+
+#include <prom/admboot.h>
+
+#define PMUGW_CONFIG_OFFSET 0x10000
+#define PMUGW_CONFIG_SIZE 0x1000
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition pmugw_partitions[] = {
+ {
+ .name = "admboot",
+ .offset = 0,
+ .size = 64*1024,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "boardcfg",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 64*1024,
+ } , {
+ .name = "firmware",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static u8 pmugw_vlans[6] __initdata = {
+ 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
+static __init void pmugw_setup_mac(void)
+{
+ u8 mac_base[6];
+ int err;
+
+ err = admboot_get_mac_base(PMUGW_CONFIG_OFFSET,
+ PMUGW_CONFIG_SIZE, mac_base);
+
+ if ((err) || !is_valid_ether_addr(mac_base))
+ random_ether_addr(mac_base);
+
+ adm5120_setup_eth_macs(mac_base);
+}
+
+static void switch_bank_gpio5(unsigned bank)
+{
+ switch (bank) {
+ case 0:
+ gpio_set_value(ADM5120_GPIO_PIN5, 0);
+ break;
+ case 1:
+ gpio_set_value(ADM5120_GPIO_PIN5, 1);
+ break;
+ }
+}
+
+void __init pmugw_setup(void)
+{
+ /* setup flash A20 line */
+ gpio_request(ADM5120_GPIO_PIN5, NULL);
+ gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+ adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+
+#ifdef CONFIG_MTD_PARTITIONS
+ adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions);
+ adm5120_flash0_data.parts = pmugw_partitions;
+#endif /* CONFIG_MTD_PARTITIONS */
+
+ adm5120_add_device_uart(1); /* ttyS0 */
+ adm5120_add_device_uart(0); /* ttyS1 */
+
+ adm5120_add_device_flash(0);
+
+ pmugw_setup_mac();
+ adm5120_add_device_switch(5, pmugw_vlans);
+}
+
+ADM5120_BOARD(MACH_ADM5120_PMUGW,
+ "Motorola Powerline MU Gateway",
+ pmugw_setup);
/*
* ADM5120 specific board support for LZMA decompressor
*
- * Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2007-2008 OpenWrt.org
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include "config.h"
#include <stddef.h>
#define READREG(r) *(volatile unsigned int *)(r)
/*
* UART definitions
*/
-#define UART_BASE 0xB2600000
+#define UART0_BASE 0xB2600000
+#define UART1_BASE 0xB2800000
/* UART registers */
#define UART_REG_DATA 0x00 /* Data register */
#define UART_REG_ECR 0x04 /* Error Clear register */
* UART routines
*/
-#define UART_READ(r) READREG(UART_BASE+(r))
-#define UART_WRITE(r,v) WRITEREG(UART_BASE+(r),(v))
+#if defined(CONFIG_USE_UART0)
+# define UART_READ(r) READREG(UART0_BASE+(r))
+# define UART_WRITE(r,v) WRITEREG(UART0_BASE+(r),(v))
+#else
+# define UART_READ(r) READREG(UART1_BASE+(r))
+# define UART_WRITE(r,v) WRITEREG(UART1_BASE+(r),(v))
+#endif
static void uart_init(void)
{
# define CONFIG_FLASH_SIZE FLASH_4M
#endif
+/*
+ * Motorola boards
+ */
+#if defined(CONFIG_BOARD_POWERLINEMUGW)
+# define CONFIG_BOARD_NAME "Powerline MU Gateway"
+# define CONFIG_USE_UART1 1
+#endif
+
/*
* ZyXEL boards
*/
# define CONFIG_FLASH_SIZE FLASH_2M
#endif
+#if !defined(CONFIG_USE_UART0) && !defined(CONFIG_USE_UART1)
+# define CONFIG_USE_UART0
+#endif
+
#endif /* _CONFIG_H_ */
* LZMA compressed kernel decompressor for ADM5120 boards
*
* Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007-2008 OpenWrt.org
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
board_init();
printf("\n\nLZMA loader for " CONFIG_BOARD_NAME
- ", Copyright (C) 2007 OpenWrt.org\n\n");
+ ", Copyright (C) 2007-2008 OpenWrt.org\n\n");
decompress_init();
$(call Image/Build/Template/Infineon/$(1),easy-5120p-ata)
endef
+define Image/Build/Profile/PMUGW
+ $(call Image/Build/Template/Infineon/$(1),powerline-mugw)
+endef
+
define Image/Build/Profile/RouterBoard
$(call Image/Build/Template/Mikrotik/$(1))
endef
$(call Image/Build/Profile/CAS861W,$(1))
$(call Image/Build/Profile/NFS101U,$(1))
$(call Image/Build/Profile/NFS101WU,$(1))
+ # Motorola
+ $(call Image/Build/Profile/PMUGW,$(1))
endef
endif
$(call Image/Build/Profile/EASY5120PATA,$(1))
# Mikrotik
$(call Image/Build/Profile/RB1xx/$(1))
+
$(call Image/Build/Experimental,$(1))
endef
source "arch/mips/jazz/Kconfig"
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
-@@ -174,6 +174,20 @@
+@@ -174,6 +174,21 @@
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
+core-$(CONFIG_ADM5120_OEM_EDIMAX) += arch/mips/adm5120/edimax/
+core-$(CONFIG_ADM5120_OEM_INFINEON) += arch/mips/adm5120/infineon/
+core-$(CONFIG_ADM5120_OEM_MIKROTIK) += arch/mips/adm5120/mikrotik/
++core-$(CONFIG_ADM5120_OEM_MOTOROLA) += arch/mips/adm5120/motorola/
+core-$(CONFIG_ADM5120_OEM_ZYXEL) += arch/mips/adm5120/zyxel/
+cflags-$(CONFIG_ADM5120) += -Iinclude/asm-mips/mach-adm5120
+load-$(CONFIG_ADM5120) += 0xffffffff80001000
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
-@@ -94,6 +94,54 @@
+@@ -94,6 +94,55 @@
#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
+#define MACH_ADM5120_BR6104K 41 /* Edimax BR-6104K */
+#define MACH_ADM5120_BR6104KP 42 /* Edimax BR-6104KP */
+#define MACH_ADM5120_BR61X4WG 43 /* Edimax BR-6104Wg/BR-6114WG */
++#define MACH_ADM5120_PMUGW 44 /* Motorola Powerline MU Gateway */
+
#define CL_SIZE COMMAND_LINE_SIZE
CONFIG_ADM5120_MACH_NFS_101=y
CONFIG_ADM5120_MACH_NP27G=y
CONFIG_ADM5120_MACH_NP28G=y
+CONFIG_ADM5120_MACH_PMUGW=y
CONFIG_ADM5120_MACH_RB_11X=y
CONFIG_ADM5120_MACH_RB_133=y
CONFIG_ADM5120_MACH_RB_133C=y
CONFIG_ADM5120_OEM_EDIMAX=y
CONFIG_ADM5120_OEM_INFINEON=y
CONFIG_ADM5120_OEM_MIKROTIK=y
+CONFIG_ADM5120_OEM_MOTOROLA=y
# CONFIG_ADM5120_OEM_ZYXEL is not set
CONFIG_ADM5120_SOC_BGA=y
CONFIG_ADM5120_WDT=y
CONFIG_USB=m
CONFIG_USB_ADM5120_HCD=m
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_HCD=m
--- /dev/null
+#
+# Copyright (C) 2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/PMUGW
+ NAME:=Motorola Powerline MU Gateway (EXPERIMENTAL)
+endef
+
+define Profile/PMUGW/Description
+ Package set optimized for the Motorola Powerline MU Gateway board
+endef
+
+$(eval $(call Profile,PMUGW))
projects / openwrt / staging / robimarko.git / commitdiff