i2c/pca954x: Initialize the mux to disconnected state

pca954x power-on default is channel 0 connected. If multiple pca954x
muxes are connected to the same physical I2C bus, the parent bus will
see channel 0 devices behind both muxes by default. This is bad.

Scenario:
            -- pca954x @ 0x70 -- ch 0 (I2C-bus-101) -- EEPROM @ 0x50
            |
I2C-bus-1 ---
            |
            -- pca954x @ 0x71 -- ch 0 (I2C-bus-111) -- EEPROM @ 0x50

1. Load I2C bus driver: creates I2C-bus-1
2. Load pca954x driver: creates virtual I2C-bus-101 and I2C-bus-111
3. Load eeprom driver
4. Try to read EEPROM @ 0x50 on I2C-bus-101. The transaction will also bleed
   onto I2C-bus-111 because pca954x @ 0x71 channel 0 is connected by default.

Fix: Initialize pca954x to disconnected state in pca954x_probe()

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org

diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c
index 54e1ce73534b8dfb6aa962fc1d06c9df2be530c1..6f89536646365db2cf316d166c2df23959d2988e 100644 (file)
--- a/drivers/i2c/muxes/pca954x.c
+++ b/drivers/i2c/muxes/pca954x.c
@@ -201,10 +201,11 @@ static int pca954x_probe(struct i2c_client *client,
 
        i2c_set_clientdata(client, data);
 
-       /* Read the mux register at addr to verify
-        * that the mux is in fact present.
+       /* Write the mux register at addr to verify
+        * that the mux is in fact present. This also
+        * initializes the mux to disconnected state.
         */
-       if (i2c_smbus_read_byte(client) < 0) {
+       if (i2c_smbus_write_byte(client, 0) < 0) {
                dev_warn(&client->dev, "probe failed\n");
                goto exit_free;
        }