ARM: at91/USB host: specify and handle properly vbus_pin_active_low

Due to an error while handling vbus_pin_active_low in ohci-at91 driver,
the specification of this property was not good in devices/board files.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: stable <stable@vger.kernel.org>         [3.2+]

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 53688c46f95652f02fced22b9d1979cd6799df1b..27cfce3d7845d5b454847fa014b30329a7b40a47 100644 (file)
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -72,7 +72,8 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
        /* Enable VBus control for UHP ports */
        for (i = 0; i < data->ports; i++) {
                if (gpio_is_valid(data->vbus_pin[i]))
-                       at91_set_gpio_output(data->vbus_pin[i], 0);
+                       at91_set_gpio_output(data->vbus_pin[i],
+                                            data->vbus_pin_active_low[i]);
        }
 
        /* Enable overcurrent notification */

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 698479f1e197cf5725139bf135eb0c89f0d5d715..ddf210ab8d123a0c5a73e31cdb35717af89fa17d 100644 (file)
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -127,7 +127,8 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
        /* Enable VBus control for UHP ports */
        for (i = 0; i < data->ports; i++) {
                if (gpio_is_valid(data->vbus_pin[i]))
-                       at91_set_gpio_output(data->vbus_pin[i], 0);
+                       at91_set_gpio_output(data->vbus_pin[i],
+                                            data->vbus_pin_active_low[i]);
        }
 
        /* Enable overcurrent notification */
@@ -188,7 +189,8 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
        /* Enable VBus control for UHP ports */
        for (i = 0; i < data->ports; i++) {
                if (gpio_is_valid(data->vbus_pin[i]))
-                       at91_set_gpio_output(data->vbus_pin[i], 0);
+                       at91_set_gpio_output(data->vbus_pin[i],
+                                            data->vbus_pin_active_low[i]);
        }
 
        usbh_ehci_data = *data;

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 66f0ddf4b2ae416102626e02514a660576164d22..2ffe50f3a9e9e056a48879dd4c6a755cfa65f622 100644 (file)
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -74,6 +74,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
        .vbus_pin       = { AT91_PIN_PA24, AT91_PIN_PA21 },
+       .vbus_pin_active_low = {1, 1},
        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 

diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index e1bea73e6b30bb3e0c3c9f192a42c9eeb0b0da0c..c88e908ddd82e9de014b360448a194c568f27154 100644 (file)
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -71,6 +71,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_hs_data = {
        .ports          = 2,
        .vbus_pin       = {AT91_PIN_PD1, AT91_PIN_PD3},
+       .vbus_pin_active_low = {1, 1},
        .overcurrent_pin= {-EINVAL, -EINVAL},
 };