obj-n :=
obj- :=
-# Core support for EXYNOS4 system
+# Core
-obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
-obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4) += common.o clock.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
+
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-$(CONFIG_ARCH_EXYNOS4) += dma.o pmu.o
+
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_EXYNOS4_MCT) += mct.o
obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
+obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <mach/exynos4-clock.h>
+#include "common.h"
+
static struct sleep_save exynos4210_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD1),
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <mach/exynos4-clock.h>
+#include "common.h"
+
static struct sleep_save exynos4212_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/map.h>
#include <mach/sysmmu.h>
#include <mach/exynos4-clock.h>
+#include "common.h"
+
static struct sleep_save exynos4_clock_save[] = {
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
--- /dev/null
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Codes for EXYNOS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/serial_core.h>
+
+#include <asm/proc-fns.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/reset.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/fimc-core.h>
+#include <plat/iic-core.h>
+#include <plat/tv-core.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+unsigned int gic_bank_offset __read_mostly;
+
+static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = EXYNOS4210_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos4210,
+ }, {
+ .idcode = EXYNOS4212_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos4212,
+ }, {
+ .idcode = EXYNOS4412_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos4412,
+ },
+};
+
+/* Initial IO mappings */
+
+static struct map_desc exynos_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_PMU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_PMU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
+ .length = SZ_128K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_L2CC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO1,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO2,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO3,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3),
+ .length = SZ_256,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC0,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void exynos_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+static void exynos4_sw_reset(void)
+{
+ __raw_writel(0x1, S5P_SWRESET);
+}
+
+/*
+ * exynos_map_io
+ *
+ * register the standard cpu IO areas
+ */
+
+void __init exynos_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P_VA_CHIPID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init exynos4_map_io(void)
+{
+ iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+ else
+ iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
+ /* initialize device information early */
+ exynos4_default_sdhci0();
+ exynos4_default_sdhci1();
+ exynos4_default_sdhci2();
+ exynos4_default_sdhci3();
+
+ s3c_adc_setname("samsung-adc-v3");
+
+ s3c_fimc_setname(0, "exynos4-fimc");
+ s3c_fimc_setname(1, "exynos4-fimc");
+ s3c_fimc_setname(2, "exynos4-fimc");
+ s3c_fimc_setname(3, "exynos4-fimc");
+
+ /* The I2C bus controllers are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+ s3c_i2c2_setname("s3c2440-i2c");
+
+ s5p_fb_setname(0, "exynos4-fb");
+ s5p_hdmi_setname("exynos4-hdmi");
+}
+
+void __init exynos4_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+
+ if (soc_is_exynos4210())
+ exynos4210_register_clocks();
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ exynos4212_register_clocks();
+
+ exynos4_register_clocks();
+ exynos4_setup_clocks();
+}
+
+#define COMBINER_ENABLE_SET 0x0
+#define COMBINER_ENABLE_CLEAR 0x4
+#define COMBINER_INT_STATUS 0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+ unsigned int irq_offset;
+ unsigned int irq_mask;
+ void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+ struct combiner_chip_data *combiner_data =
+ irq_data_get_irq_chip_data(data);
+
+ return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+ u32 mask = 1 << (data->irq % 32);
+
+ __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+ u32 mask = 1 << (data->irq % 32);
+
+ __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+ unsigned int cascade_irq, combiner_irq;
+ unsigned long status;
+
+ chained_irq_enter(chip, desc);
+
+ spin_lock(&irq_controller_lock);
+ status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+ spin_unlock(&irq_controller_lock);
+ status &= chip_data->irq_mask;
+
+ if (status == 0)
+ goto out;
+
+ combiner_irq = __ffs(status);
+
+ cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+ if (unlikely(cascade_irq >= NR_IRQS))
+ do_bad_IRQ(cascade_irq, desc);
+ else
+ generic_handle_irq(cascade_irq);
+
+ out:
+ chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+ .name = "COMBINER",
+ .irq_mask = combiner_mask_irq,
+ .irq_unmask = combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+ if (combiner_nr >= MAX_COMBINER_NR)
+ BUG();
+ if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+ BUG();
+ irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+ unsigned int irq_start)
+{
+ unsigned int i;
+
+ if (combiner_nr >= MAX_COMBINER_NR)
+ BUG();
+
+ combiner_data[combiner_nr].base = base;
+ combiner_data[combiner_nr].irq_offset = irq_start;
+ combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+ /* Disable all interrupts */
+
+ __raw_writel(combiner_data[combiner_nr].irq_mask,
+ base + COMBINER_ENABLE_CLEAR);
+
+ /* Setup the Linux IRQ subsystem */
+
+ for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+ + MAX_IRQ_IN_COMBINER; i++) {
+ irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
+ irq_set_chip_data(i, &combiner_data[combiner_nr]);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+}
+
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
+{
+ struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+
+ gic_data->cpu_base = S5P_VA_GIC_CPU +
+ (gic_bank_offset * smp_processor_id());
+
+ gic_data->dist_base = S5P_VA_GIC_DIST +
+ (gic_bank_offset * smp_processor_id());
+}
+
+void __init exynos4_init_irq(void)
+{
+ int irq;
+
+ gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
+
+ for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+
+ combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+ COMBINER_IRQ(irq, 0));
+ combiner_cascade_irq(irq, IRQ_SPI(irq));
+ }
+
+ /*
+ * The parameters of s5p_init_irq() are for VIC init.
+ * Theses parameters should be NULL and 0 because EXYNOS4
+ * uses GIC instead of VIC.
+ */
+ s5p_init_irq(NULL, 0);
+}
+
+struct sysdev_class exynos4_sysclass = {
+ .name = "exynos4-core",
+};
+
+static struct sys_device exynos4_sysdev = {
+ .cls = &exynos4_sysclass,
+};
+
+static int __init exynos4_core_init(void)
+{
+ return sysdev_class_register(&exynos4_sysclass);
+}
+core_initcall(exynos4_core_init);
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init exynos4_l2x0_cache_init(void)
+{
+ /* TAG, Data Latency Control: 2cycle */
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+
+ if (soc_is_exynos4210())
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ /* L2X0 Prefetch Control */
+ __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+ /* L2X0 Power Control */
+ __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
+ S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+ l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
+
+ return 0;
+}
+
+early_initcall(exynos4_l2x0_cache_init);
+#endif
+
+int __init exynos_init(void)
+{
+ printk(KERN_INFO "EXYNOS: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = exynos_idle;
+
+ /* set sw_reset function */
+ if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
+ s5p_reset_hook = exynos4_sw_reset;
+
+ return sysdev_register(&exynos4_sysdev);
+}
+
+static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
+ [0] = {
+ .name = "uclk1",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+
+void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->has_fracval = 1;
+ tcfg->clocks = exynos4_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
+ }
+ tcfg->flags |= NO_NEED_CHECK_CLKSRC;
+ }
+
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int exynos4_get_irq_nr(unsigned int number)
+{
+ u32 ret = 0;
+
+ switch (number) {
+ case 0 ... 3:
+ ret = (number + IRQ_EINT0);
+ break;
+ case 4 ... 7:
+ ret = (number + (IRQ_EINT4 - 4));
+ break;
+ case 8 ... 15:
+ ret = (number + (IRQ_EINT8 - 8));
+ break;
+ default:
+ printk(KERN_ERR "number available : %d\n", number);
+ }
+
+ return ret;
+}
+
+static inline void exynos4_irq_eint_mask(struct irq_data *data)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask |= eint_irq_to_bit(data->irq);
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+}
+
+static void exynos4_irq_eint_unmask(struct irq_data *data)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask &= ~(eint_irq_to_bit(data->irq));
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+}
+
+static inline void exynos4_irq_eint_ack(struct irq_data *data)
+{
+ __raw_writel(eint_irq_to_bit(data->irq),
+ S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void exynos4_irq_eint_maskack(struct irq_data *data)
+{
+ exynos4_irq_eint_mask(data);
+ exynos4_irq_eint_ack(data);
+}
+
+static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = EINT_OFFSET(data->irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs & 0x7) * 4;
+ mask = 0x7 << shift;
+
+ spin_lock(&eint_lock);
+ ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ ctrl &= ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+
+ switch (offs) {
+ case 0 ... 7:
+ s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+ break;
+ case 8 ... 15:
+ s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+ break;
+ case 16 ... 23:
+ s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+ break;
+ case 24 ... 31:
+ s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+ break;
+ default:
+ printk(KERN_ERR "No such irq number %d", offs);
+ }
+
+ return 0;
+}
+
+static struct irq_chip exynos4_irq_eint = {
+ .name = "exynos4-eint",
+ .irq_mask = exynos4_irq_eint_mask,
+ .irq_unmask = exynos4_irq_eint_unmask,
+ .irq_mask_ack = exynos4_irq_eint_maskack,
+ .irq_ack = exynos4_irq_eint_ack,
+ .irq_set_type = exynos4_irq_eint_set_type,
+#ifdef CONFIG_PM
+ .irq_set_wake = s3c_irqext_wake,
+#endif
+};
+
+/*
+ * exynos4_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void exynos4_irq_demux_eint(unsigned int start)
+{
+ unsigned int irq;
+
+ u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+ u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+ status &= ~mask;
+ status &= 0xff;
+
+ while (status) {
+ irq = fls(status) - 1;
+ generic_handle_irq(irq + start);
+ status &= ~(1 << irq);
+ }
+}
+
+static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
+ exynos4_irq_demux_eint(IRQ_EINT(16));
+ exynos4_irq_demux_eint(IRQ_EINT(24));
+ chained_irq_exit(chip, desc);
+}
+
+static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+ u32 *irq_data = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+
+ chained_irq_enter(chip, desc);
+ chip->irq_mask(&desc->irq_data);
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ generic_handle_irq(*irq_data);
+
+ chip->irq_unmask(&desc->irq_data);
+ chained_irq_exit(chip, desc);
+}
+
+int __init exynos4_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = 0 ; irq <= 31 ; irq++) {
+ irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+ handle_level_irq);
+ set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+ }
+
+ irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+
+ for (irq = 0 ; irq <= 15 ; irq++) {
+ eint0_15_data[irq] = IRQ_EINT(irq);
+
+ irq_set_handler_data(exynos4_get_irq_nr(irq),
+ &eint0_15_data[irq]);
+ irq_set_chained_handler(exynos4_get_irq_nr(irq),
+ exynos4_irq_eint0_15);
+ }
+
+ return 0;
+}
+arch_initcall(exynos4_init_irq_eint);
--- /dev/null
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for EXYNOS machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
+#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+
+void exynos_init_io(struct map_desc *mach_desc, int size);
+void exynos4_init_irq(void);
+
+void exynos4_register_clocks(void);
+void exynos4_setup_clocks(void);
+
+void exynos4210_register_clocks(void);
+void exynos4212_register_clocks(void);
+
+extern struct sys_timer exynos4_timer;
+
+#ifdef CONFIG_ARCH_EXYNOS
+extern int exynos_init(void);
+extern void exynos4_map_io(void);
+extern void exynos4_init_clocks(int xtal);
+extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define exynos4_init_clocks NULL
+#define exynos4_init_uarts NULL
+#define exynos4_map_io NULL
+#define exynos_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos/cpu.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/sysdev.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/adc-core.h>
-#include <plat/sdhci.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/reset.h>
-#include <plat/tv-core.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-pmu.h>
-
-unsigned int gic_bank_offset __read_mostly;
-
-extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
- unsigned int irq_start);
-extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
-
-/* Initial IO mappings */
-static struct map_desc exynos_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(EXYNOS_PA_SYSTIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_PMU,
- .pfn = __phys_to_pfn(EXYNOS_PA_PMU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
- .pfn = __phys_to_pfn(EXYNOS_PA_COMBINER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_CPU,
- .pfn = __phys_to_pfn(EXYNOS_PA_GIC_CPU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_DIST,
- .pfn = __phys_to_pfn(EXYNOS_PA_GIC_DIST),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CMU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
- .length = SZ_128K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
- .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
- .length = SZ_8K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_L2CC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO1,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO2,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO3,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3),
- .length = SZ_256,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_DMC0,
- .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_USB_HSPHY,
- .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc0[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void exynos_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
-static void exynos4_sw_reset(void)
-{
- __raw_writel(0x1, S5P_SWRESET);
-}
-
-/*
- * exynos_map_io
- *
- * register the standard cpu IO areas
- */
-void __init exynos4_map_io(void)
-{
- iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
- iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
- if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
- iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
- else
- iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
-
- /* initialize device information early */
- exynos4_default_sdhci0();
- exynos4_default_sdhci1();
- exynos4_default_sdhci2();
- exynos4_default_sdhci3();
-
- s3c_adc_setname("samsung-adc-v3");
-
- s3c_fimc_setname(0, "exynos4-fimc");
- s3c_fimc_setname(1, "exynos4-fimc");
- s3c_fimc_setname(2, "exynos4-fimc");
- s3c_fimc_setname(3, "exynos4-fimc");
-
- /* The I2C bus controllers are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
- s3c_i2c2_setname("s3c2440-i2c");
-
- s5p_fb_setname(0, "exynos4-fb");
- s5p_hdmi_setname("exynos4-hdmi");
-}
-
-void __init exynos4_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
-
- if (soc_is_exynos4210())
- exynos4210_register_clocks();
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- exynos4212_register_clocks();
-
- exynos4_register_clocks();
- exynos4_setup_clocks();
-}
-
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
- struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
- gic_data->cpu_base = S5P_VA_GIC_CPU +
- (gic_bank_offset * smp_processor_id());
-
- gic_data->dist_base = S5P_VA_GIC_DIST +
- (gic_bank_offset * smp_processor_id());
-}
-
-void __init exynos4_init_irq(void)
-{
- int irq;
-
- gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
-
- gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
- gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
- gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
- gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
-
- for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
-
- combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
- COMBINER_IRQ(irq, 0));
- combiner_cascade_irq(irq, IRQ_SPI(irq));
- }
-
- /* The parameters of s5p_init_irq() are for VIC init.
- * Theses parameters should be NULL and 0 because EXYNOS4
- * uses GIC instead of VIC.
- */
- s5p_init_irq(NULL, 0);
-}
-
-struct sysdev_class exynos4_sysclass = {
- .name = "exynos4-core",
-};
-
-static struct sys_device exynos4_sysdev = {
- .cls = &exynos4_sysclass,
-};
-
-static int __init exynos4_core_init(void)
-{
- return sysdev_class_register(&exynos4_sysclass);
-}
-core_initcall(exynos4_core_init);
-
-#ifdef CONFIG_CACHE_L2X0
-static int __init exynos4_l2x0_cache_init(void)
-{
- /* TAG, Data Latency Control: 2cycle */
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-
- if (soc_is_exynos4210())
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-
- /* L2X0 Prefetch Control */
- __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
-
- /* L2X0 Power Control */
- __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
- S5P_VA_L2CC + L2X0_POWER_CTRL);
-
- l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
-
- return 0;
-}
-
-early_initcall(exynos4_l2x0_cache_init);
-#endif
-
-int __init exynos_init(void)
-{
- printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = exynos_idle;
-
- /* set sw_reset function */
- if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
- s5p_reset_hook = exynos4_sw_reset;
-
- return sysdev_register(&exynos4_sysdev);
-}
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
#define S3C_PA_UART EXYNOS4_PA_UART
-#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID
#define S5P_PA_EHCI EXYNOS4_PA_EHCI
#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA
#define S5P_PA_SDO EXYNOS4_PA_SDO
#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM
-#define S5P_PA_SROMC EXYNOS4_PA_SROMC
-#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON
-#define S5P_PA_TIMER EXYNOS4_PA_TIMER
#define S5P_PA_VP EXYNOS4_PA_VP
#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC
#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1
#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD
-#define EXYNOS_PA_COMBINER EXYNOS4_PA_COMBINER
-#define EXYNOS_PA_GIC_CPU EXYNOS4_PA_GIC_CPU
-#define EXYNOS_PA_GIC_DIST EXYNOS4_PA_GIC_DIST
-#define EXYNOS_PA_PMU EXYNOS4_PA_PMU
-#define EXYNOS_PA_SYSTIMER EXYNOS4_PA_SYSTIMER
-
/* Compatibility UART */
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART(x) (EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
#define S5P_PA_UART0 S5P_PA_UART(0)
#define S5P_PA_UART1 S5P_PA_UART(1)
#define S5P_PA_UART2 S5P_PA_UART(2)
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
- [0] = {
- .name = "uclk1",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
-/* uart registration process */
-void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->has_fracval = 1;
- tcfg->clocks = exynos4_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
- }
- tcfg->flags |= NO_NEED_CHECK_CLKSRC;
- }
-
- s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/irq-combiner.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/common/gic.c
- *
- * IRQ COMBINER support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#define COMBINER_ENABLE_SET 0x0
-#define COMBINER_ENABLE_CLEAR 0x4
-#define COMBINER_INT_STATUS 0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
- unsigned int irq_offset;
- unsigned int irq_mask;
- void __iomem *base;
-};
-
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
- struct combiner_chip_data *combiner_data =
- irq_data_get_irq_chip_data(data);
-
- return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
- u32 mask = 1 << (data->irq % 32);
-
- __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
- u32 mask = 1 << (data->irq % 32);
-
- __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
- struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
- unsigned int cascade_irq, combiner_irq;
- unsigned long status;
-
- chained_irq_enter(chip, desc);
-
- spin_lock(&irq_controller_lock);
- status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
- spin_unlock(&irq_controller_lock);
- status &= chip_data->irq_mask;
-
- if (status == 0)
- goto out;
-
- combiner_irq = __ffs(status);
-
- cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
- if (unlikely(cascade_irq >= NR_IRQS))
- do_bad_IRQ(cascade_irq, desc);
- else
- generic_handle_irq(cascade_irq);
-
- out:
- chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
- .name = "COMBINER",
- .irq_mask = combiner_mask_irq,
- .irq_unmask = combiner_unmask_irq,
-};
-
-void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
- if (combiner_nr >= MAX_COMBINER_NR)
- BUG();
- if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
- BUG();
- irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
- unsigned int irq_start)
-{
- unsigned int i;
-
- if (combiner_nr >= MAX_COMBINER_NR)
- BUG();
-
- combiner_data[combiner_nr].base = base;
- combiner_data[combiner_nr].irq_offset = irq_start;
- combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
- /* Disable all interrupts */
-
- __raw_writel(combiner_data[combiner_nr].irq_mask,
- base + COMBINER_ENABLE_CLEAR);
-
- /* Setup the Linux IRQ subsystem */
-
- for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
- + MAX_IRQ_IN_COMBINER; i++) {
- irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
- irq_set_chip_data(i, &combiner_data[combiner_nr]);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
-}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/irq-eint.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-
-#include <plat/pm.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/regs-gpio.h>
-
-#include <asm/mach/irq.h>
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
- u32 ret = 0;
-
- switch (number) {
- case 0 ... 3:
- ret = (number + IRQ_EINT0);
- break;
- case 4 ... 7:
- ret = (number + (IRQ_EINT4 - 4));
- break;
- case 8 ... 15:
- ret = (number + (IRQ_EINT8 - 8));
- break;
- default:
- printk(KERN_ERR "number available : %d\n", number);
- }
-
- return ret;
-}
-
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
-{
- u32 mask;
-
- spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask |= eint_irq_to_bit(data->irq);
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-}
-
-static void exynos4_irq_eint_unmask(struct irq_data *data)
-{
- u32 mask;
-
- spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask &= ~(eint_irq_to_bit(data->irq));
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-}
-
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
-{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void exynos4_irq_eint_maskack(struct irq_data *data)
-{
- exynos4_irq_eint_mask(data);
- exynos4_irq_eint_ack(data);
-}
-
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = EINT_OFFSET(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S5P_IRQ_TYPE_EDGE_RISING;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs & 0x7) * 4;
- mask = 0x7 << shift;
-
- spin_lock(&eint_lock);
- ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
- ctrl &= ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-
- switch (offs) {
- case 0 ... 7:
- s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
- break;
- case 8 ... 15:
- s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
- break;
- case 16 ... 23:
- s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
- break;
- case 24 ... 31:
- s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
- break;
- default:
- printk(KERN_ERR "No such irq number %d", offs);
- }
-
- return 0;
-}
-
-static struct irq_chip exynos4_irq_eint = {
- .name = "exynos4-eint",
- .irq_mask = exynos4_irq_eint_mask,
- .irq_unmask = exynos4_irq_eint_unmask,
- .irq_mask_ack = exynos4_irq_eint_maskack,
- .irq_ack = exynos4_irq_eint_ack,
- .irq_set_type = exynos4_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-/* exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos4_irq_demux_eint(unsigned int start)
-{
- unsigned int irq;
-
- u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
- u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
-
- status &= ~mask;
- status &= 0xff;
-
- while (status) {
- irq = fls(status) - 1;
- generic_handle_irq(irq + start);
- status &= ~(1 << irq);
- }
-}
-
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
- exynos4_irq_demux_eint(IRQ_EINT(16));
- exynos4_irq_demux_eint(IRQ_EINT(24));
- chained_irq_exit(chip, desc);
-}
-
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
- u32 *irq_data = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
-
- chained_irq_enter(chip, desc);
- chip->irq_mask(&desc->irq_data);
-
- if (chip->irq_ack)
- chip->irq_ack(&desc->irq_data);
-
- generic_handle_irq(*irq_data);
-
- chip->irq_unmask(&desc->irq_data);
- chained_irq_exit(chip, desc);
-}
-
-int __init exynos4_init_irq_eint(void)
-{
- int irq;
-
- for (irq = 0 ; irq <= 31 ; irq++) {
- irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
- handle_level_irq);
- set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
- }
-
- irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
-
- for (irq = 0 ; irq <= 15 ; irq++) {
- eint0_15_data[irq] = IRQ_EINT(irq);
-
- irq_set_handler_data(exynos4_get_irq_nr(irq),
- &eint0_15_data[irq]);
- irq_set_chained_handler(exynos4_get_irq_nr(irq),
- exynos4_irq_eint0_15);
- }
-
- return 0;
-}
-
-arch_initcall(exynos4_init_irq_eint);
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/exynos4.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
static void __init armlex4210_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(armlex4210_uartcfgs,
ARRAY_SIZE(armlex4210_uartcfgs));
#include <plat/adc.h>
#include <plat/regs-fb-v4.h>
#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
static void __init nuri_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
}
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
static void __init origen_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
}
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/exynos4.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
#include <plat/keypad.h>
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
{
clk_xusbxti.rate = 24000000;
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
}
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
static void __init smdkv310_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
}
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
#include <media/s5p_fimc.h>
#include <media/m5mols.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
static void __init universal_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
# Core files
obj-y += dev-uart.o
-obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
+++ /dev/null
-/* linux/arch/arm/plat-s5p/cpu.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/exynos4.h>
-
-/* table of supported CPUs */
-
-static const char name_exynos4210[] = "EXYNOS4210";
-static const char name_exynos4212[] = "EXYNOS4212";
-static const char name_exynos4412[] = "EXYNOS4412";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = EXYNOS4210_CPU_ID,
- .idmask = EXYNOS4_CPU_MASK,
- .map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
- .init = exynos_init,
- .name = name_exynos4210,
- }, {
- .idcode = EXYNOS4212_CPU_ID,
- .idmask = EXYNOS4_CPU_MASK,
- .map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
- .init = exynos_init,
- .name = name_exynos4212,
- }, {
- .idcode = EXYNOS4412_CPU_ID,
- .idmask = EXYNOS4_CPU_MASK,
- .map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
- .init = exynos_init,
- .name = name_exynos4412,
- },
-};
-
-/* minimal IO mapping */
-
-static struct map_desc s5p_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(S5P_PA_CHIPID),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S5P_PA_SYSCON),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S5P_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S3C_PA_WDT),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(S5P_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-/* read cpu identification code */
-
-void __init s5p_init_io(struct map_desc *mach_desc,
- int size, void __iomem *cpuid_addr)
-{
- /* initialize the io descriptors we need for initialization */
- iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
- if (mach_desc)
- iotable_init(mach_desc, size);
-
- /* detect cpu id and rev. */
- s5p_init_cpu(cpuid_addr);
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
extern void s5p_init_irq(u32 *vic, u32 num_vic);
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-extern void s5p_init_io(struct map_desc *mach_desc,
- int size, void __iomem *cpuid_addr);
extern void s3c24xx_init_cpu(void);
extern void s3c64xx_init_cpu(void);
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/exynos4.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for exynos4 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for EXYNOS4 related SoCs */
-
-extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void exynos4_register_clocks(void);
-extern void exynos4210_register_clocks(void);
-extern void exynos4212_register_clocks(void);
-extern void exynos4_setup_clocks(void);
-
-#ifdef CONFIG_ARCH_EXYNOS
-extern int exynos_init(void);
-extern void exynos4_init_irq(void);
-extern void exynos4_map_io(void);
-extern void exynos4_init_clocks(int xtal);
-extern struct sys_timer exynos4_timer;
-
-#define exynos4_init_uarts exynos4_common_init_uarts
-
-#else
-#define exynos4_init_clocks NULL
-#define exynos4_init_uarts NULL
-#define exynos4_map_io NULL
-#define exynos_init NULL
-#endif
projects / openwrt / staging / blogic.git / commitdiff