mtd: nand: atmel: switch to mtd_ooblayout_ops

Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index b132c8fd3701affcc92f87920dcd1ebec5b2532f..eec8ca739cae8f686ae0b4a84be3e9e7da1b3b49 100644 (file)
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -71,30 +71,44 @@ struct atmel_nand_nfc_caps {
        uint32_t rb_mask;
 };
 
-/* oob layout for large page size
+/*
+ * oob layout for large page size
  * bad block info is on bytes 0 and 1
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
- */
-static struct nand_ecclayout atmel_oobinfo_large = {
-       .eccbytes = 4,
-       .eccpos = {60, 61, 62, 63},
-       .oobfree = {
-               {2, 58}
-       },
-};
-
-/* oob layout for small page size
+ *
+ * oob layout for small page size
  * bad block info is on bytes 4 and 5
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
  */
-static struct nand_ecclayout atmel_oobinfo_small = {
-       .eccbytes = 4,
-       .eccpos = {0, 1, 2, 3},
-       .oobfree = {
-               {6, 10}
-       },
+static int atmel_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+                                 struct mtd_oob_region *oobregion)
+{
+       if (section)
+               return -ERANGE;
+
+       oobregion->length = 4;
+       oobregion->offset = 0;
+
+       return 0;
+}
+
+static int atmel_ooblayout_free_sp(struct mtd_info *mtd, int section,
+                                  struct mtd_oob_region *oobregion)
+{
+       if (section)
+               return -ERANGE;
+
+       oobregion->offset = 6;
+       oobregion->length = mtd->oobsize - oobregion->offset;
+
+       return 0;
+}
+
+static const struct mtd_ooblayout_ops atmel_ooblayout_sp_ops = {
+       .ecc = atmel_ooblayout_ecc_sp,
+       .free = atmel_ooblayout_free_sp,
 };
 
 struct atmel_nfc {
@@ -162,8 +176,6 @@ struct atmel_nand_host {
        int                     *pmecc_delta;
 };
 
-static struct nand_ecclayout atmel_pmecc_oobinfo;
-
 /*
  * Enable NAND.
  */
@@ -480,22 +492,6 @@ static int pmecc_get_ecc_bytes(int cap, int sector_size)
        return (m * cap + 7) / 8;
 }
 
-static void pmecc_config_ecc_layout(struct nand_ecclayout *layout,
-                                   int oobsize, int ecc_len)
-{
-       int i;
-
-       layout->eccbytes = ecc_len;
-
-       /* ECC will occupy the last ecc_len bytes continuously */
-       for (i = 0; i < ecc_len; i++)
-               layout->eccpos[i] = oobsize - ecc_len + i;
-
-       layout->oobfree[0].offset = PMECC_OOB_RESERVED_BYTES;
-       layout->oobfree[0].length =
-               oobsize - ecc_len - layout->oobfree[0].offset;
-}
-
 static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
 {
        int table_size;
@@ -1012,8 +1008,8 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
 {
        struct nand_chip *nand_chip = mtd_to_nand(mtd);
        struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
+       int eccbytes = mtd_ooblayout_count_eccbytes(mtd);
        uint32_t val = 0;
-       struct nand_ecclayout *ecc_layout;
        struct mtd_oob_region oobregion;
 
        pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
@@ -1064,12 +1060,11 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
                | PMECC_CFG_AUTO_DISABLE);
        pmecc_writel(host->ecc, CFG, val);
 
-       ecc_layout = nand_chip->ecc.layout;
        pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
        mtd_ooblayout_ecc(mtd, 0, &oobregion);
        pmecc_writel(host->ecc, SADDR, oobregion.offset);
        pmecc_writel(host->ecc, EADDR,
-                    oobregion.offset + ecc_layout->eccbytes - 1);
+                    oobregion.offset + eccbytes - 1);
        /* See datasheet about PMECC Clock Control Register */
        pmecc_writel(host->ecc, CLK, 2);
        pmecc_writel(host->ecc, IDR, 0xff);
@@ -1291,11 +1286,8 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
                        err_no = -EINVAL;
                        goto err;
                }
-               pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
-                                       mtd->oobsize,
-                                       nand_chip->ecc.total);
 
-               nand_chip->ecc.layout = &atmel_pmecc_oobinfo;
+               mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
                break;
        default:
                dev_warn(host->dev,
@@ -1650,19 +1642,19 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev,
        /* set ECC page size and oob layout */
        switch (mtd->writesize) {
        case 512:
-               nand_chip->ecc.layout = &atmel_oobinfo_small;
+               mtd_set_ooblayout(mtd, &atmel_ooblayout_sp_ops);
                ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
                break;
        case 1024:
-               nand_chip->ecc.layout = &atmel_oobinfo_large;
+               mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
                ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
                break;
        case 2048:
-               nand_chip->ecc.layout = &atmel_oobinfo_large;
+               mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
                ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
                break;
        case 4096:
-               nand_chip->ecc.layout = &atmel_oobinfo_large;
+               mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
                ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
                break;
        default: