IMAGES :=
endef
-define Device/ventana
+define Device/gateworks_ventana
DEVICE_VENDOR := Gateworks
DEVICE_MODEL := Ventana family
DEVICE_VARIANT := normal NAND flash
+ DEVICE_NAME := ventana
DEVICE_DTS:= \
imx6dl-gw51xx \
imx6dl-gw52xx \
KERNEL += | boot-overlay
IMAGES := nand.ubi bootfs.tar.gz dtb
UBINIZE_PARTS = boot=$$(KDIR_KERNEL_IMAGE).boot.ubifs=15
- BOOT_SCRIPT := bootscript-ventana
+ BOOT_SCRIPT := bootscript-gateworks_ventana
IMAGE/nand.ubi := append-ubi
IMAGE/bootfs.tar.gz := bootfs.tar.gz
IMAGE/dtb := install-dtb
BLOCKSIZE := 128k
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB
endef
-TARGET_DEVICES += ventana
+TARGET_DEVICES += gateworks_ventana
-define Device/ventana-large
- $(Device/ventana)
+define Device/gateworks_ventana-large
+ $(Device/gateworks_ventana)
DEVICE_VARIANT := large NAND flash
- DEVICE_NAME := ventana
IMAGES := nand.ubi
PAGESIZE := 4096
BLOCKSIZE := 256k
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 248KiB
endef
-TARGET_DEVICES += ventana-large
+TARGET_DEVICES += gateworks_ventana-large
-define Device/wandboard
+define Device/wandboard_dual
DEVICE_VENDOR := Wandboard
DEVICE_MODEL := Dual
DEVICE_DTS := imx6dl-wandboard
endef
-TARGET_DEVICES += wandboard
+TARGET_DEVICES += wandboard_dual
-define Device/cubox-i
+define Device/solidrun_cubox-i
DEVICE_VENDOR := SolidRun
DEVICE_MODEL := CuBox-i
KERNEL := kernel-bin
KERNEL_SUFFIX := -zImage
UBOOT := mx6cuboxi
- BOOT_SCRIPT := bootscript-cubox
+ BOOT_SCRIPT := bootscript-solidrun_cubox
DEVICE_NAME := cubox
DEVICE_PACKAGES := kmod-drm-imx kmod-drm-imx-hdmi kmod-usb-hid
DEVICE_DTS := imx6q-cubox-i imx6dl-cubox-i imx6q-hummingboard imx6dl-hummingboard
IMAGE/combined.bin := append-rootfs | pad-extra 128k | imx6-sdcard
IMAGE/dtb := install-dtb
endef
-TARGET_DEVICES += cubox-i
+TARGET_DEVICES += solidrun_cubox-i
-define Device/apalis
+define Device/toradex_apalis
DEVICE_VENDOR := Toradex
DEVICE_MODEL := Apalis family
SUPPORTED_DEVICES := apalis,ixora apalis,eval
kmod-can kmod-can-flexcan kmod-can-raw \
kmod-leds-gpio kmod-gpio-button-hotplug \
kmod-pps-gpio kmod-rtc-ds1307
- BOOT_SCRIPT := bootscript-apalis
+ BOOT_SCRIPT := bootscript-toradex_apalis
FILESYSTEMS := squashfs
IMAGES := combined.bin sysupgrade.bin
DEVICE_IMG_NAME = $$(DEVICE_IMG_PREFIX)-$$(1).$$(2)
ARTIFACTS := recovery.scr
ARTIFACT/recovery.scr := recovery-scr
endef
-TARGET_DEVICES += apalis
+TARGET_DEVICES += toradex_apalis
$(eval $(call BuildImage))
+++ /dev/null
-echo "Toradex Apalis OpenWrt Boot script v1.1"
-
-run emmcfinduuid
-
-setenv nextcon 0
-setenv boot_file uImage
-setenv fdt_file imx6q-apalis-ixora.dtb
-setenv root root=PARTUUID=${uuid} rootfstype=squashfs rootwait
-setenv bootargs earlyprintk console=${console},${baudrate}n8 ${root}
-setenv fsload ext4load mmc ${emmcdev}:${emmcbootpart}
-
-if ${fsload} ${kernel_addr_r} ${boot_file}; then
- if ${fsload} ${fdt_addr_r} ${fdt_file}; then
- test -n "$fdt_fixup" && run fdt_fixup
- bootm ${kernel_addr_r} - ${fdt_addr_r}
- else
- echo "Error loading device-tree"
- fi
-else
- echo "Error loading kernel image"
-fi
+++ /dev/null
-echo "CuBox OpenWrt Boot script"
-
-# Set console variable for both UART and HDMI
-setenv console console=ttymxc0,115200 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32
-
-# Find correct dtb
-if test ${board_rev} = MX6DL; then
- setenv fdt_soc_type imx6dl;
-elif test ${board_rev} = MX6Q; then
- setenv fdt_soc_type imx6q;
-fi
-if test ${board_name} = CUBOXI; then
- setenv fdt_name ${fdt_soc_type}-cubox-i.dtb;
-elif test ${board_name} = HUMMINGBOARD; then
- setenv fdt_name ${fdt_soc_type}-hummingboard.dtb;
-fi
-
-# Set correct devtype and partition
-if test ${devtype} != mmc; then setenv devtype mmc; fi
-if mmc dev 0; then
- setenv mmcdev 0
-elif mmc dev 1; then
- setenv mmcdev 1
-fi
-
-# Boot from the SD card is supported at the moment
-setenv bootargs "${console} root=/dev/mmcblk1p2 rw rootwait"
-mmc dev ${mmcdev}
-load ${devtype} ${mmcdev}:${devplist} ${kernel_addr_r} /uImage
-load ${devtype} ${mmcdev}:${devplist} ${fdt_addr_r} /${fdt_name}
-bootz ${kernel_addr_r} - ${fdt_addr_r}
--- /dev/null
+echo "Gateworks Ventana OpenWrt Boot script v1.02"
+
+# set some defaults
+# set some defaults
+test -n "$fs" || fs=ext2
+test -n "$disk" || disk=0
+setenv nextcon 0
+setenv bootargs console=${console},${baudrate}
+setenv loadaddr 10800000
+setenv fdt_addr 18000000
+
+# detect dtype by looking for kernel on media the bootloader
+# has mounted (in order of preference: usb/mmc/sata)
+#
+# This assumes the bootloader has already started the respective subsystem
+# or mounted the filesystem if appropriate to get to this bootscript
+#
+# To Speed up boot set dtype manually
+if test -n "$dtype" ; then
+ echo "Using dtype from env: $dtype"
+else
+ echo "Detecting boot device (dtype)..."
+ if ${fs}load usb ${disk}:1 ${loadaddr} ${bootdir}/uImage ; then
+ dtype=usb
+ elif ${fs}load mmc ${disk}:1 ${loadaddr} ${bootdir}/uImage ; then
+ dtype=mmc
+ elif ${fs}load sata ${disk}:1 ${loadaddr} ${bootdir}/uImage ; then
+ dtype=sata
+ elif ubifsload ${loadaddr} ${bootdir}/uImage ; then
+ dtype=nand
+ fi
+ echo "detected dtype:$dtype"
+fi
+
+echo "Booting from ${dtype}..."
+if itest.s "x${dtype}" == "xnand" ; then
+ # fix partition name
+ # OpenWrt kernel bug prevents partition name of 'rootfs' from booting
+ # instead name the partition ubi which is what is looked for by
+ # procd sysupgrade
+ mtdparts del rootfs && mtdparts add nand0 - ubi
+ echo "mtdparts:${mtdparts}"
+ setenv fsload ubifsload
+ setenv root "ubi0:ubi ubi.mtd=2 rootfstype=squashfs,ubifs"
+else
+ setenv fsload "${fs}load ${dtype} ${disk}:1"
+ part uuid ${dtype} ${disk}:1 uuid
+ if test -z "${uuid}"; then
+ # fallback to bootdev
+ if test -n "$bootdev" ; then
+ echo "Using bootdev from env: $bootdev"
+ else
+ if itest.s "x${dtype}" == "xmmc" ; then
+ bootdev=mmcblk0p1
+ else
+ bootdev=sda1
+ fi
+ fi
+ setenv root "root=/dev/${bootdev}"
+ else
+ setenv root "root=PARTUUID=${uuid}"
+ fi
+ setenv root "$root rootfstype=${fs} rootwait rw"
+fi
+
+setenv bootargs "${bootargs}" "${root}" "${video}" "${extra}"
+if ${fsload} ${loadaddr} ${bootdir}/uImage; then
+ if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then
+ echo Loaded DTB from ${bootdir}/${fdt_file}
+ test -n "$fixfdt" && run fixfdt
+ bootm ${loadaddr} - ${fdt_addr}
+ elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then
+ echo Loaded DTB from ${bootdir}/${fdt_file1}
+ test -n "$fixfdt" && run fixfdt
+ bootm ${loadaddr} - ${fdt_addr}
+ elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then
+ echo Loaded DTB from ${bootdir}/${fdt_file2}
+ test -n "$fixfdt" && run fixfdt
+ bootm ${loadaddr} - ${fdt_addr}
+ else
+ echo "Error loading device-tree"
+ fi
+else
+ echo "Error loading kernel image"
+fi
--- /dev/null
+echo "CuBox OpenWrt Boot script"
+
+# Set console variable for both UART and HDMI
+setenv console console=ttymxc0,115200 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32
+
+# Find correct dtb
+if test ${board_rev} = MX6DL; then
+ setenv fdt_soc_type imx6dl;
+elif test ${board_rev} = MX6Q; then
+ setenv fdt_soc_type imx6q;
+fi
+if test ${board_name} = CUBOXI; then
+ setenv fdt_name ${fdt_soc_type}-cubox-i.dtb;
+elif test ${board_name} = HUMMINGBOARD; then
+ setenv fdt_name ${fdt_soc_type}-hummingboard.dtb;
+fi
+
+# Set correct devtype and partition
+if test ${devtype} != mmc; then setenv devtype mmc; fi
+if mmc dev 0; then
+ setenv mmcdev 0
+elif mmc dev 1; then
+ setenv mmcdev 1
+fi
+
+# Boot from the SD card is supported at the moment
+setenv bootargs "${console} root=/dev/mmcblk1p2 rw rootwait"
+mmc dev ${mmcdev}
+load ${devtype} ${mmcdev}:${devplist} ${kernel_addr_r} /uImage
+load ${devtype} ${mmcdev}:${devplist} ${fdt_addr_r} /${fdt_name}
+bootz ${kernel_addr_r} - ${fdt_addr_r}
--- /dev/null
+echo "Toradex Apalis OpenWrt Boot script v1.1"
+
+run emmcfinduuid
+
+setenv nextcon 0
+setenv boot_file uImage
+setenv fdt_file imx6q-apalis-ixora.dtb
+setenv root root=PARTUUID=${uuid} rootfstype=squashfs rootwait
+setenv bootargs earlyprintk console=${console},${baudrate}n8 ${root}
+setenv fsload ext4load mmc ${emmcdev}:${emmcbootpart}
+
+if ${fsload} ${kernel_addr_r} ${boot_file}; then
+ if ${fsload} ${fdt_addr_r} ${fdt_file}; then
+ test -n "$fdt_fixup" && run fdt_fixup
+ bootm ${kernel_addr_r} - ${fdt_addr_r}
+ else
+ echo "Error loading device-tree"
+ fi
+else
+ echo "Error loading kernel image"
+fi
+++ /dev/null
-echo "Gateworks Ventana OpenWrt Boot script v1.02"
-
-# set some defaults
-# set some defaults
-test -n "$fs" || fs=ext2
-test -n "$disk" || disk=0
-setenv nextcon 0
-setenv bootargs console=${console},${baudrate}
-setenv loadaddr 10800000
-setenv fdt_addr 18000000
-
-# detect dtype by looking for kernel on media the bootloader
-# has mounted (in order of preference: usb/mmc/sata)
-#
-# This assumes the bootloader has already started the respective subsystem
-# or mounted the filesystem if appropriate to get to this bootscript
-#
-# To Speed up boot set dtype manually
-if test -n "$dtype" ; then
- echo "Using dtype from env: $dtype"
-else
- echo "Detecting boot device (dtype)..."
- if ${fs}load usb ${disk}:1 ${loadaddr} ${bootdir}/uImage ; then
- dtype=usb
- elif ${fs}load mmc ${disk}:1 ${loadaddr} ${bootdir}/uImage ; then
- dtype=mmc
- elif ${fs}load sata ${disk}:1 ${loadaddr} ${bootdir}/uImage ; then
- dtype=sata
- elif ubifsload ${loadaddr} ${bootdir}/uImage ; then
- dtype=nand
- fi
- echo "detected dtype:$dtype"
-fi
-
-echo "Booting from ${dtype}..."
-if itest.s "x${dtype}" == "xnand" ; then
- # fix partition name
- # OpenWrt kernel bug prevents partition name of 'rootfs' from booting
- # instead name the partition ubi which is what is looked for by
- # procd sysupgrade
- mtdparts del rootfs && mtdparts add nand0 - ubi
- echo "mtdparts:${mtdparts}"
- setenv fsload ubifsload
- setenv root "ubi0:ubi ubi.mtd=2 rootfstype=squashfs,ubifs"
-else
- setenv fsload "${fs}load ${dtype} ${disk}:1"
- part uuid ${dtype} ${disk}:1 uuid
- if test -z "${uuid}"; then
- # fallback to bootdev
- if test -n "$bootdev" ; then
- echo "Using bootdev from env: $bootdev"
- else
- if itest.s "x${dtype}" == "xmmc" ; then
- bootdev=mmcblk0p1
- else
- bootdev=sda1
- fi
- fi
- setenv root "root=/dev/${bootdev}"
- else
- setenv root "root=PARTUUID=${uuid}"
- fi
- setenv root "$root rootfstype=${fs} rootwait rw"
-fi
-
-setenv bootargs "${bootargs}" "${root}" "${video}" "${extra}"
-if ${fsload} ${loadaddr} ${bootdir}/uImage; then
- if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then
- echo Loaded DTB from ${bootdir}/${fdt_file}
- test -n "$fixfdt" && run fixfdt
- bootm ${loadaddr} - ${fdt_addr}
- elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then
- echo Loaded DTB from ${bootdir}/${fdt_file1}
- test -n "$fixfdt" && run fixfdt
- bootm ${loadaddr} - ${fdt_addr}
- elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then
- echo Loaded DTB from ${bootdir}/${fdt_file2}
- test -n "$fixfdt" && run fixfdt
- bootm ${loadaddr} - ${fdt_addr}
- else
- echo "Error loading device-tree"
- fi
-else
- echo "Error loading kernel image"
-fi
+++ /dev/null
-# flash u-boot-with-spl.imx
-# using fixed size of 1M for U-Boot + SPL
-mmc dev 0 1
-mmc write 0x12100000 0x2 0x800
-
-# flash openwrt-imx6-apalis-squashfs.combined.bin
-setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
-run set_blkcnt
-mmc dev 0 0
-mmc write 0x12500000 0 ${blkcnt}
-
-env default -f -a
-saveenv
-
-reset
--- /dev/null
+# flash u-boot-with-spl.imx
+# using fixed size of 1M for U-Boot + SPL
+mmc dev 0 1
+mmc write 0x12100000 0x2 0x800
+
+# flash openwrt-imx6-apalis-squashfs.combined.bin
+setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200'
+run set_blkcnt
+mmc dev 0 0
+mmc write 0x12500000 0 ${blkcnt}
+
+env default -f -a
+saveenv
+
+reset
projects / openwrt / staging / ynezz.git / commitdiff