/*
- * eeh.c
* Copyright IBM Corporation 2001, 2005, 2006
* Copyright Dave Engebretsen & Todd Inglett 2001
* Copyright Linas Vepstas 2005, 2006
+ * Copyright 2001-2012 IBM Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*/
#include <linux/delay.h>
-#include <linux/sched.h> /* for init_mm */
+#include <linux/sched.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/pci.h>
#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
-/* --------------------------------------------------------------- */
-/* Below lies the EEH event infrastructure */
-
+/**
+ * rtas_slot_error_detail - Retrieve error log through RTAS call
+ * @pdn: device node
+ * @severity: temporary or permanent error log
+ * @driver_log: driver log to be combined with the retrieved error log
+ * @loglen: length of driver log
+ *
+ * This routine should be called to retrieve error log through the dedicated
+ * RTAS call.
+ */
static void rtas_slot_error_detail(struct pci_dn *pdn, int severity,
char *driver_log, size_t loglen)
{
}
/**
- * gather_pci_data - copy assorted PCI config space registers to buff
+ * gather_pci_data - Copy assorted PCI config space registers to buff
* @pdn: device to report data for
* @buf: point to buffer in which to log
* @len: amount of room in buffer
return n;
}
+/**
+ * eeh_slot_error_detail - Generate combined log including driver log and error log
+ * @pdn: device node
+ * @severity: temporary or permanent error log
+ *
+ * This routine should be called to generate the combined log, which
+ * is comprised of driver log and error log. The driver log is figured
+ * out from the config space of the corresponding PCI device, while
+ * the error log is fetched through platform dependent function call.
+ */
void eeh_slot_error_detail(struct pci_dn *pdn, int severity)
{
size_t loglen = 0;
* read_slot_reset_state - Read the reset state of a device node's slot
* @dn: device node to read
* @rets: array to return results in
+ *
+ * Read the reset state of a device node's slot through platform dependent
+ * function call.
*/
static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
{
}
/**
- * eeh_wait_for_slot_status - returns error status of slot
- * @pdn pci device node
- * @max_wait_msecs maximum number to millisecs to wait
+ * eeh_wait_for_slot_status - Returns error status of slot
+ * @pdn: pci device node
+ * @max_wait_msecs: maximum number to millisecs to wait
*
* Return negative value if a permanent error, else return
* Partition Endpoint (PE) status value.
mwait = rets[2];
if (mwait <= 0) {
- printk (KERN_WARNING
- "EEH: Firmware returned bad wait value=%d\n", mwait);
+ printk(KERN_WARNING "EEH: Firmware returned bad wait value=%d\n",
+ mwait);
mwait = 1000;
} else if (mwait > 300*1000) {
- printk (KERN_WARNING
- "EEH: Firmware is taking too long, time=%d\n", mwait);
+ printk(KERN_WARNING "EEH: Firmware is taking too long, time=%d\n",
+ mwait);
mwait = 300*1000;
}
max_wait_msecs -= mwait;
- msleep (mwait);
+ msleep(mwait);
}
printk(KERN_WARNING "EEH: Timed out waiting for slot status\n");
}
/**
- * eeh_token_to_phys - convert EEH address token to phys address
- * @token i/o token, should be address in the form 0xA....
+ * eeh_token_to_phys - Convert EEH address token to phys address
+ * @token: I/O token, should be address in the form 0xA....
+ *
+ * This routine should be called to convert virtual I/O address
+ * to physical one.
*/
static inline unsigned long eeh_token_to_phys(unsigned long token)
{
return pa | (token & (PAGE_SIZE-1));
}
-/**
- * Return the "partitionable endpoint" (pe) under which this device lies
+/**
+ * find_device_pe - Retrieve the PE for the given device
+ * @dn: device node
+ *
+ * Return the PE under which this device lies
*/
struct device_node * find_device_pe(struct device_node *dn)
{
return dn;
}
-/** Mark all devices that are children of this device as failed.
- * Mark the device driver too, so that it can see the failure
- * immediately; this is critical, since some drivers poll
- * status registers in interrupts ... If a driver is polling,
- * and the slot is frozen, then the driver can deadlock in
- * an interrupt context, which is bad.
+/**
+ * __eeh_mark_slot - Mark all child devices as failed
+ * @parent: parent device
+ * @mode_flag: failure flag
+ *
+ * Mark all devices that are children of this device as failed.
+ * Mark the device driver too, so that it can see the failure
+ * immediately; this is critical, since some drivers poll
+ * status registers in interrupts ... If a driver is polling,
+ * and the slot is frozen, then the driver can deadlock in
+ * an interrupt context, which is bad.
*/
-
static void __eeh_mark_slot(struct device_node *parent, int mode_flag)
{
struct device_node *dn;
}
}
-void eeh_mark_slot (struct device_node *dn, int mode_flag)
+/**
+ * eeh_mark_slot - Mark the indicated device and its children as failed
+ * @dn: parent device
+ * @mode_flag: failure flag
+ *
+ * Mark the indicated device and its child devices as failed.
+ * The device drivers are marked as failed as well.
+ */
+void eeh_mark_slot(struct device_node *dn, int mode_flag)
{
struct pci_dev *dev;
- dn = find_device_pe (dn);
+ dn = find_device_pe(dn);
/* Back up one, since config addrs might be shared */
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
__eeh_mark_slot(dn, mode_flag);
}
+/**
+ * __eeh_clear_slot - Clear failure flag for the child devices
+ * @parent: parent device
+ * @mode_flag: flag to be cleared
+ *
+ * Clear failure flag for the child devices.
+ */
static void __eeh_clear_slot(struct device_node *parent, int mode_flag)
{
struct device_node *dn;
}
}
-void eeh_clear_slot (struct device_node *dn, int mode_flag)
+/**
+ * eeh_clear_slot - Clear failure flag for the indicated device and its children
+ * @dn: parent device
+ * @mode_flag: flag to be cleared
+ *
+ * Clear failure flag for the indicated device and its children.
+ */
+void eeh_clear_slot(struct device_node *dn, int mode_flag)
{
unsigned long flags;
raw_spin_lock_irqsave(&confirm_error_lock, flags);
- dn = find_device_pe (dn);
+ dn = find_device_pe(dn);
/* Back up one, since config addrs might be shared */
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
}
-void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
-{
- struct device_node *dn;
-
- for_each_child_of_node(parent, dn) {
- if (PCI_DN(dn)) {
-
- struct pci_dev *dev = PCI_DN(dn)->pcidev;
-
- if (dev && dev->driver)
- *freset |= dev->needs_freset;
-
- __eeh_set_pe_freset(dn, freset);
- }
- }
-}
-
-void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
-{
- struct pci_dev *dev;
- dn = find_device_pe(dn);
-
- /* Back up one, since config addrs might be shared */
- if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
- dn = dn->parent;
-
- dev = PCI_DN(dn)->pcidev;
- if (dev)
- *freset |= dev->needs_freset;
-
- __eeh_set_pe_freset(dn, freset);
-}
-
/**
- * eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze
- * @dn device node
- * @dev pci device, if known
+ * eeh_dn_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @dn: device node
+ * @dev: pci device, if known
*
* Check for an EEH failure for the given device node. Call this
* routine if the result of a read was all 0xff's and you want to
pdn->eeh_check_count ++;
if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) {
location = of_get_property(dn, "ibm,loc-code", NULL);
- printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
+ printk(KERN_ERR "EEH: %d reads ignored for recovering device at "
"location=%s driver=%s pci addr=%s\n",
pdn->eeh_check_count, location,
eeh_driver_name(dev), eeh_pci_name(dev));
- printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+ printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n",
eeh_driver_name(dev));
dump_stack();
}
}
/* Note that config-io to empty slots may fail;
- * they are empty when they don't have children. */
+ * they are empty when they don't have children.
+ */
if ((rets[0] == 5) && (rets[2] == 0) && (dn->child == NULL)) {
false_positives++;
pdn->eeh_false_positives ++;
/* Avoid repeated reports of this failure, including problems
* with other functions on this device, and functions under
- * bridges. */
- eeh_mark_slot (dn, EEH_MODE_ISOLATED);
+ * bridges.
+ */
+ eeh_mark_slot(dn, EEH_MODE_ISOLATED);
raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
- eeh_send_failure_event (dn, dev);
+ eeh_send_failure_event(dn, dev);
/* Most EEH events are due to device driver bugs. Having
* a stack trace will help the device-driver authors figure
- * out what happened. So print that out. */
+ * out what happened. So print that out.
+ */
dump_stack();
return 1;
EXPORT_SYMBOL_GPL(eeh_dn_check_failure);
/**
- * eeh_check_failure - check if all 1's data is due to EEH slot freeze
- * @token i/o token, should be address in the form 0xA....
- * @val value, should be all 1's (XXX why do we need this arg??)
+ * eeh_check_failure - Check if all 1's data is due to EEH slot freeze
+ * @token: I/O token, should be address in the form 0xA....
+ * @val: value, should be all 1's (XXX why do we need this arg??)
*
* Check for an EEH failure at the given token address. Call this
* routine if the result of a read was all 0xff's and you want to
}
dn = pci_device_to_OF_node(dev);
- eeh_dn_check_failure (dn, dev);
+ eeh_dn_check_failure(dn, dev);
pci_dev_put(dev);
return val;
EXPORT_SYMBOL(eeh_check_failure);
-/* ------------------------------------------------------------- */
-/* The code below deals with error recovery */
/**
- * rtas_pci_enable - enable MMIO or DMA transfers for this slot
+ * rtas_pci_enable - Enable MMIO or DMA transfers for this slot
* @pdn pci device node
+ *
+ * This routine should be called to reenable frozen MMIO or DMA
+ * so that it would work correctly again. It's useful while doing
+ * recovery or log collection on the indicated device.
*/
-
int
rtas_pci_enable(struct pci_dn *pdn, int function)
{
printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n",
function, rc, pdn->node->full_name);
- rc = eeh_wait_for_slot_status (pdn, PCI_BUS_RESET_WAIT_MSEC);
+ rc = eeh_wait_for_slot_status(pdn, PCI_BUS_RESET_WAIT_MSEC);
if ((rc == 4) && (function == EEH_THAW_MMIO))
return 0;
}
/**
- * rtas_pci_slot_reset - raises/lowers the pci #RST line
- * @pdn pci device node
+ * rtas_pci_slot_reset - Raises/Lowers the pci #RST line
+ * @pdn: pci device node
* @state: 1/0 to raise/lower the #RST
*
* Clear the EEH-frozen condition on a slot. This routine
* asserts the PCI #RST line if the 'state' argument is '1',
* and drops the #RST line if 'state is '0'. This routine is
* safe to call in an interrupt context.
- *
*/
-
static void
rtas_pci_slot_reset(struct pci_dn *pdn, int state)
{
int config_addr;
int rc;
- BUG_ON (pdn==NULL);
+ BUG_ON(pdn==NULL);
if (!pdn->phb) {
- printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n",
+ printk(KERN_WARNING "EEH: in slot reset, device node %s has no phb\n",
pdn->node->full_name);
return;
}
/**
* pcibios_set_pcie_slot_reset - Set PCI-E reset state
- * @dev: pci device struct
- * @state: reset state to enter
+ * @dev: pci device struct
+ * @state: reset state to enter
*
* Return value:
* 0 if success
- **/
+ */
int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
{
struct device_node *dn = pci_device_to_OF_node(dev);
}
/**
- * rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
- * @pdn: pci device node to be reset.
+ * __eeh_set_pe_freset - Check the required reset for child devices
+ * @parent: parent device
+ * @freset: return value
+ *
+ * Each device might have its preferred reset type: fundamental or
+ * hot reset. The routine is used to collect the information from
+ * the child devices so that they could be reset accordingly.
*/
+void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
+{
+ struct device_node *dn;
+
+ for_each_child_of_node(parent, dn) {
+ if (PCI_DN(dn)) {
+ struct pci_dev *dev = PCI_DN(dn)->pcidev;
+
+ if (dev && dev->driver)
+ *freset |= dev->needs_freset;
+
+ __eeh_set_pe_freset(dn, freset);
+ }
+ }
+}
+
+/**
+ * eeh_set_pe_freset - Check the required reset for the indicated device and its children
+ * @dn: parent device
+ * @freset: return value
+ *
+ * Each device might have its preferred reset type: fundamental or
+ * hot reset. The routine is used to collected the information for
+ * the indicated device and its children so that the bunch of the
+ * devices could be reset properly.
+ */
+void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
+{
+ struct pci_dev *dev;
+ dn = find_device_pe(dn);
+
+ /* Back up one, since config addrs might be shared */
+ if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+ dn = dn->parent;
+ dev = PCI_DN(dn)->pcidev;
+ if (dev)
+ *freset |= dev->needs_freset;
+
+ __eeh_set_pe_freset(dn, freset);
+}
+
+/**
+ * __rtas_set_slot_reset - Assert the pci #RST line for 1/4 second
+ * @pdn: pci device node to be reset.
+ *
+ * Assert the PCI #RST line for 1/4 second.
+ */
static void __rtas_set_slot_reset(struct pci_dn *pdn)
{
unsigned int freset = 0;
rtas_pci_slot_reset(pdn, 1);
/* The PCI bus requires that the reset be held high for at least
- * a 100 milliseconds. We wait a bit longer 'just in case'. */
-
+ * a 100 milliseconds. We wait a bit longer 'just in case'.
+ */
#define PCI_BUS_RST_HOLD_TIME_MSEC 250
- msleep (PCI_BUS_RST_HOLD_TIME_MSEC);
+ msleep(PCI_BUS_RST_HOLD_TIME_MSEC);
/* We might get hit with another EEH freeze as soon as the
* pci slot reset line is dropped. Make sure we don't miss
- * these, and clear the flag now. */
- eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED);
+ * these, and clear the flag now.
+ */
+ eeh_clear_slot(pdn->node, EEH_MODE_ISOLATED);
- rtas_pci_slot_reset (pdn, 0);
+ rtas_pci_slot_reset(pdn, 0);
/* After a PCI slot has been reset, the PCI Express spec requires
* a 1.5 second idle time for the bus to stabilize, before starting
- * up traffic. */
+ * up traffic.
+ */
#define PCI_BUS_SETTLE_TIME_MSEC 1800
- msleep (PCI_BUS_SETTLE_TIME_MSEC);
+ msleep(PCI_BUS_SETTLE_TIME_MSEC);
}
+/**
+ * rtas_set_slot_reset - Reset the indicated PE
+ * @pdn: PCI device node
+ *
+ * This routine should be called to reset indicated device, including
+ * PE. A PE might include multiple PCI devices and sometimes PCI bridges
+ * might be involved as well.
+ */
int rtas_set_slot_reset(struct pci_dn *pdn)
{
int i, rc;
return -1;
}
-/* ------------------------------------------------------- */
/** Save and restore of PCI BARs
*
* Although firmware will set up BARs during boot, it doesn't
* the expansion ROM base address, the latency timer, and etc.
* from the saved values in the device node.
*/
-static inline void __restore_bars (struct pci_dn *pdn)
+static inline void __restore_bars(struct pci_dn *pdn)
{
int i;
u32 cmd;
#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)])
- rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1,
+ rtas_write_config(pdn, PCI_CACHE_LINE_SIZE, 1,
SAVED_BYTE(PCI_CACHE_LINE_SIZE));
- rtas_write_config (pdn, PCI_LATENCY_TIMER, 1,
+ rtas_write_config(pdn, PCI_LATENCY_TIMER, 1,
SAVED_BYTE(PCI_LATENCY_TIMER));
/* max latency, min grant, interrupt pin and line */
rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]);
/* Restore PERR & SERR bits, some devices require it,
- don't touch the other command bits */
+ * don't touch the other command bits
+ */
rtas_read_config(pdn, PCI_COMMAND, 4, &cmd);
if (pdn->config_space[1] & PCI_COMMAND_PARITY)
cmd |= PCI_COMMAND_PARITY;
}
/**
- * eeh_restore_bars - restore the PCI config space info
+ * eeh_restore_bars - Restore the PCI config space info
+ * @pdn: PCI device node
*
* This routine performs a recursive walk to the children
* of this device as well.
return;
if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code))
- __restore_bars (pdn);
+ __restore_bars(pdn);
for_each_child_of_node(pdn->node, dn)
- eeh_restore_bars (PCI_DN(dn));
+ eeh_restore_bars(PCI_DN(dn));
}
/**
- * eeh_save_bars - save device bars
+ * eeh_save_bars - Save device bars
+ * @pdn: PCI device node
*
* Save the values of the device bars. Unlike the restore
* routine, this routine is *not* recursive. This is because
rtas_read_config(pdn, i * 4, 4, &pdn->config_space[i]);
}
+/**
+ * rtas_configure_bridge - Configure PCI bridges for the indicated PE
+ * @pdn: PCI device node
+ *
+ * PCI bridges might be included in PE. In order to make the PE work
+ * again. The included PCI bridges should be recovered after the PE
+ * encounters frozen state.
+ */
void
rtas_configure_bridge(struct pci_dn *pdn)
{
BUID_HI(pdn->phb->buid),
BUID_LO(pdn->phb->buid));
if (rc) {
- printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n",
+ printk(KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n",
rc, pdn->node->full_name);
}
}
-/* ------------------------------------------------------------- */
-/* The code below deals with enabling EEH for devices during the
- * early boot sequence. EEH must be enabled before any PCI probing
- * can be done.
- */
-
#define EEH_ENABLE 1
struct eeh_early_enable_info {
unsigned int buid_lo;
};
-static int get_pe_addr (int config_addr,
+/**
+ * get_pe_addr - Retrieve PE address with given BDF address
+ * @config_addr: BDF address
+ * @info: BUID of the associated PHB
+ *
+ * There're 2 kinds of addresses existing in EEH core components:
+ * BDF address and PE address. Besides, there has dedicated platform
+ * dependent function call to retrieve the PE address according to
+ * the given BDF address. Further more, we prefer PE address on BDF
+ * address in EEH core components.
+ */
+static int get_pe_addr(int config_addr,
struct eeh_early_enable_info *info)
{
unsigned int rets[3];
/* Use latest config-addr token on power6 */
if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
/* Make sure we have a PE in hand */
- ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets,
+ ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
config_addr, info->buid_hi, info->buid_lo, 1);
if (ret || (rets[0]==0))
return 0;
- ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets,
+ ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
config_addr, info->buid_hi, info->buid_lo, 0);
if (ret)
return 0;
/* Use older config-addr token on power5 */
if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
- ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets,
+ ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
config_addr, info->buid_hi, info->buid_lo, 0);
if (ret)
return 0;
return 0;
}
-/* Enable eeh for the given device node. */
+/**
+ * early_enable_eeh - Early enable EEH on the indicated device
+ * @dn: device node
+ * @data: BUID
+ *
+ * Enable EEH functionality on the specified PCI device. The function
+ * is expected to be called before real PCI probing is done. However,
+ * the PHBs have been initialized at this point.
+ */
static void *early_enable_eeh(struct device_node *dn, void *data)
{
unsigned int rets[3];
pdn->class_code = *class_code;
/* Ok... see if this device supports EEH. Some do, some don't,
- * and the only way to find out is to check each and every one. */
+ * and the only way to find out is to check each and every one.
+ */
regs = of_get_property(dn, "reg", NULL);
if (regs) {
/* First register entry is addr (00BBSS00) */
pdn->eeh_config_addr = regs[0];
/* If the newer, better, ibm,get-config-addr-info is supported,
- * then use that instead. */
+ * then use that instead.
+ */
pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info);
/* Some older systems (Power4) allow the
* ibm,set-eeh-option call to succeed even on nodes
* where EEH is not supported. Verify support
- * explicitly. */
+ * explicitly.
+ */
ret = read_slot_reset_state(pdn, rets);
if ((ret == 0) && (rets[1] == 1))
enable = 1;
} else {
/* This device doesn't support EEH, but it may have an
- * EEH parent, in which case we mark it as supported. */
+ * EEH parent, in which case we mark it as supported.
+ */
if (dn->parent && PCI_DN(dn->parent)
&& (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
/* Parent supports EEH. */
return NULL;
}
-/*
+/**
+ * eeh_init - EEH initialization
+ *
* Initialize EEH by trying to enable it for all of the adapters in the system.
* As a side effect we can determine here if eeh is supported at all.
* Note that we leave EEH on so failed config cycles won't cause a machine
ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
- ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
+ ibm_configure_bridge = rtas_token("ibm,configure-bridge");
ibm_configure_pe = rtas_token("ibm,configure-pe");
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE)
}
/**
- * eeh_add_device_early - enable EEH for the indicated device_node
+ * eeh_add_device_early - Enable EEH for the indicated device_node
* @dn: device node for which to set up EEH
*
* This routine must be used to perform EEH initialization for PCI
early_enable_eeh(dn, &info);
}
+/**
+ * eeh_add_device_tree_early - Enable EEH for the indicated device
+ * @dn: device node
+ *
+ * This routine must be used to perform EEH initialization for the
+ * indicated PCI device that was added after system boot (e.g.
+ * hotplug, dlpar).
+ */
void eeh_add_device_tree_early(struct device_node *dn)
{
struct device_node *sib;
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
/**
- * eeh_add_device_late - perform EEH initialization for the indicated pci device
+ * eeh_add_device_late - Perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH
*
* This routine must be used to complete EEH initialization for PCI
}
WARN_ON(pdn->pcidev);
- pci_dev_get (dev);
+ pci_dev_get(dev);
pdn->pcidev = dev;
pci_addr_cache_insert_device(dev);
eeh_sysfs_add_device(dev);
}
+/**
+ * eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus
+ * @bus: PCI bus
+ *
+ * This routine must be used to perform EEH initialization for PCI
+ * devices which are attached to the indicated PCI bus. The PCI bus
+ * is added after system boot through hotplug or dlpar.
+ */
void eeh_add_device_tree_late(struct pci_bus *bus)
{
struct pci_dev *dev;
EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
/**
- * eeh_remove_device - undo EEH setup for the indicated pci device
+ * eeh_remove_device - Undo EEH setup for the indicated pci device
* @dev: pci device to be removed
*
* This routine should be called when a device is removed from
return;
}
PCI_DN(dn)->pcidev = NULL;
- pci_dev_put (dev);
+ pci_dev_put(dev);
pci_addr_cache_remove_device(dev);
eeh_sysfs_remove_device(dev);
}
+/**
+ * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
+ * @dev: PCI device
+ *
+ * This routine must be called when a device is removed from the
+ * running system through hotplug or dlpar. The corresponding
+ * PCI address cache will be removed.
+ */
void eeh_remove_bus_device(struct pci_dev *dev)
{
struct pci_bus *bus = dev->subordinate;
projects / openwrt / staging / blogic.git / commitdiff