i2c: i801: Add support for Intel Cedar Fork

Add PCI ID for Intel Cedar Fork PCH.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 0500193434cb2957eec34124d621ccc176eac555..d477024569269ff741720537ef609cafb60166f2 100644 (file)
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -36,6 +36,7 @@ Supported adapters:
   * Intel Gemini Lake (SOC)
   * Intel Cannon Lake-H (PCH)
   * Intel Cannon Lake-LP (PCH)
+  * Intel Cedar Fork (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index c06dce2c1da745fab9727715f5ffaa01a40d4d04..45a3f3ca29b383ce7edfbb34e6d3fd506c5173b6 100644 (file)
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -131,6 +131,7 @@ config I2C_I801
            Gemini Lake (SOC)
            Cannon Lake-H (PCH)
            Cannon Lake-LP (PCH)
+           Cedar Fork (PCH)
 
          This driver can also be built as a module.  If so, the module
          will be called i2c-i801.

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index e114e4e00d2972e2bb55765bfbf7c431d38ccb44..9e12a53ef7b8cf2cdccf9de473af8e2cec9c5f36 100644 (file)
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -68,6 +68,7 @@
  * Gemini Lake (SOC)           0x31d4  32      hard    yes     yes     yes
  * Cannon Lake-H (PCH)         0xa323  32      hard    yes     yes     yes
  * Cannon Lake-LP (PCH)                0x9da3  32      hard    yes     yes     yes
+ * Cedar Fork (PCH)            0x18df  32      hard    yes     yes     yes
  *
  * Features supported by this driver:
  * Software PEC                                no
@@ -204,6 +205,7 @@
 
 /* Older devices have their ID defined in <linux/pci_ids.h> */
 #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS             0x0f12
+#define PCI_DEVICE_ID_INTEL_CDF_SMBUS                  0x18df
 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS                  0x19df
 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS          0x1c22
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS             0x1d22
@@ -1025,6 +1027,7 @@ static const struct pci_device_id i801_ids[] = {
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
+       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMBUS) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
@@ -1513,6 +1516,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
        case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
        case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS:
        case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
+       case PCI_DEVICE_ID_INTEL_CDF_SMBUS:
        case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
        case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
                priv->features |= FEATURE_I2C_BLOCK_READ;