--- /dev/null
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface mac0
+ option ifname eth0
+
+config interface lan
+ option ifname "lan1 lan2 lan3 lan4"
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+
+config interface wan
+ option ifname wan
+ option proto dhcp
tl-wr741nd)
status_led="tl-wr741nd:green:system"
;;
+ tl-wr841n-v1)
+ status_led="tl-wr841n:green:system"
+ ;;
tl-wr941nd)
status_led="tl-wr941nd:green:system"
;;
*TL-WR741ND)
name="tl-wr741nd"
;;
+ *"TL-WR841N v1")
+ name="tl-wr841n-v1"
+ ;;
*TL-WR941ND)
name="tl-wr941nd"
;;
}
return 0
;;
- tl-wr741nd | tl-wr941nd | tl-wr1043nd)
+ tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
[ "$magic" != "0100" ] && {
echo "Invalid image type."
return 1
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
+CONFIG_AR71XX_MACH_TL_WR841N_V1=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNDR3700=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
+CONFIG_AR71XX_MACH_TL_WR841N_V1=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNDR3700=y
CONFIG_AR71XX_MACH_TEW_632BRP=y
CONFIG_AR71XX_MACH_TL_WR1043ND=y
CONFIG_AR71XX_MACH_TL_WR741ND=y
+CONFIG_AR71XX_MACH_TL_WR841N_V1=y
CONFIG_AR71XX_MACH_TL_WR941ND=y
CONFIG_AR71XX_MACH_UBNT=y
CONFIG_AR71XX_MACH_WNDR3700=y
select AR71XX_DEV_AP91_PCI if PCI
default y
+config AR71XX_MACH_TL_WR841N_V1
+ bool "TP-LINK TL-WR841N v1 support"
+ select AR71XX_DEV_M25P80
+ default y
+
config AR71XX_MACH_TL_WR941ND
bool "TP-LINK TL-WR941ND support"
select AR71XX_DEV_M25P80
obj-$(CONFIG_AR71XX_MACH_RB_4XX) += mach-rb-4xx.o
obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o
obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o
+obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o
obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o
--- /dev/null
+/*
+ * TP-LINK TL-WR841N board support
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+
+#include <asm/mips_machine.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+
+#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2
+#define TL_WR841ND_V1_GPIO_LED_QSS 5
+
+#define TL_WR841ND_V1_GPIO_BTN_RESET 3
+#define TL_WR841ND_V1_GPIO_BTN_QSS 7
+
+#define TL_WR841ND_V1_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wr841n_v1_partitions[] = {
+ {
+ .name = "redboot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x140000,
+ } , {
+ .name = "rootfs",
+ .offset = 0x160000,
+ .size = 0x280000,
+ } , {
+ .name = "config",
+ .offset = 0x3e0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "firmware",
+ .offset = 0x020000,
+ .size = 0x3c0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wr841n_v1_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = tl_wr841n_v1_partitions,
+ .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions),
+#endif
+};
+
+static struct ar71xx_pci_irq tl_wr841n_v1_pci_irqs[] __initdata = {
+ {
+ .slot = 0,
+ .pin = 1,
+ .irq = AR71XX_PCI_IRQ_DEV0,
+ }, {
+ .slot = 1,
+ .pin = 1,
+ .irq = AR71XX_PCI_IRQ_DEV1,
+ }, {
+ .slot = 2,
+ .pin = 1,
+ .irq = AR71XX_PCI_IRQ_DEV2,
+ }
+};
+
+static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
+ {
+ .name = "tl-wr841n:green:system",
+ .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr841n:red:qss",
+ .gpio = TL_WR841ND_V1_GPIO_LED_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button tl_wr841n_v1_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 5,
+ .gpio = TL_WR841ND_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 5,
+ .gpio = TL_WR841ND_V1_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct dsa_chip_data tl_wr841n_v1_dsa_chip = {
+ .port_names[0] = "wan",
+ .port_names[1] = "lan1",
+ .port_names[2] = "lan2",
+ .port_names[3] = "lan3",
+ .port_names[4] = "lan4",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data tl_wr841n_v1_dsa_data = {
+ .nr_chips = 1,
+ .chip = &tl_wr841n_v1_dsa_chip,
+};
+
+static void __init tl_wr841n_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+ ar71xx_set_mac_base(mac);
+
+ ar71xx_add_device_mdio(0x0);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth0_data.phy_mask = 0x0;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+ ar71xx_add_device_eth(0);
+
+ ar71xx_add_device_dsa(0, &tl_wr841n_v1_dsa_data);
+
+ ar71xx_add_device_m25p80(&tl_wr841n_v1_flash_data);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
+ tl_wr841n_v1_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, TL_WR841ND_V1_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr841n_v1_gpio_buttons),
+ tl_wr841n_v1_gpio_buttons);
+
+ ar71xx_pci_init(ARRAY_SIZE(tl_wr841n_v1_pci_irqs),
+ tl_wr841n_v1_pci_irqs);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V1, "TP-LINK TL-WR841N v1",
+ tl_wr841n_v1_setup);
}, {
.name = "TL-WR741ND",
.mach_type = AR71XX_MACH_TL_WR741ND,
+ }, {
+ .name = "TL-WR841N-v1.5",
+ .mach_type = AR71XX_MACH_TL_WR841N_V1,
}, {
.name = "TL-WR941ND",
.mach_type = AR71XX_MACH_TL_WR941ND,
AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
+ AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
AR71XX_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */
AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
$(call Image/Build/Template/TPLINK4K/$(1),tl-wr741ndv1,board=TL-WR741ND,TL-WR741NDv1)
endef
+define Image/Build/Profile/TLWR841NV15
+ $(call Image/Build/Template/TPLINK/$(1),tl-wr841n-v1.5,board=TL-WR841N-v1.5,TL-WR841Nv1.5)
+endef
+
define Image/Build/Profile/TLWR841NDV3
$(call Image/Build/Template/TPLINK/$(1),tl-wr841ndv3,board=TL-WR941ND,TL-WR841NDv3)
endef
$(call Image/Build/Profile/TEW632BRP,$(1))
$(call Image/Build/Profile/TEW652BRP,$(1))
$(call Image/Build/Profile/TLWR741NDV1,$(1))
+ $(call Image/Build/Profile/TLWR841NV15,$(1))
$(call Image/Build/Profile/TLWR841NDV3,$(1))
$(call Image/Build/Profile/TLWR841NDV5,$(1))
$(call Image/Build/Profile/TLWR941NDV2,$(1))
$(eval $(call Profile,TLWR741NDV1))
+define Profile/TLWR841NV15
+ NAME:=TP-LINK TL-WR841N v1.5
+ PACKAGES:=kmod-ath9k hostapd-mini
+endef
+
+define Profile/TLWR841NV15/Description
+ Package set optimized for the TP-LINK TL-WR841N v1.5.
+endef
+
+$(eval $(call Profile,TLWR841NV15))
+
define Profile/TLWR841NDV3
NAME:=TP-LINK TL-WR841ND v3
PACKAGES:=kmod-ath9k hostapd-mini
#define HEADER_VERSION_V1 0x01000000
#define HWID_TL_WR741ND_V1 0x07410001
+#define HWID_TL_WR841N_V1_5 0x08410002
#define HWID_TL_WR841ND_V3 0x08410003
#define HWID_TL_WR841ND_V5 0x08410005
#define HWID_TL_WR941ND_V2 0x09410002
.kernel_la = 0x80060000,
.kernel_ep = 0x80060000,
.rootfs_ofs = 0x140000,
+ }, {
+ .id = "TL-WR841Nv1.5",
+ .hw_id = HWID_TL_WR841N_V1_5,
+ .hw_rev = 2,
+ .fw_max_len = 0x3c0000,
+ .kernel_la = 0x80060000,
+ .kernel_ep = 0x80060000,
+ .rootfs_ofs = 0x140000,
}, {
.id = "TL-WR841NDv3",
.hw_id = HWID_TL_WR841ND_V3,
projects / openwrt / staging / lynxis.git / commitdiff