F: scripts/sign-file.c
F: scripts/extract-cert.c
-CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
-L: devel@driverdev.osuosl.org
-S: Obsolete
-F: drivers/staging/wusbcore/
-
CFAG12864B LCD DRIVER
M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
S: Maintained
F: drivers/usb/common/ulpi.c
F: include/linux/ulpi/
-ULTRA-WIDEBAND (UWB) SUBSYSTEM:
-L: devel@driverdev.osuosl.org
-S: Obsolete
-F: drivers/staging/uwb/
-
UNICODE SUBSYSTEM:
M: Gabriel Krisman Bertazi <krisman@collabora.com>
L: linux-fsdevel@vger.kernel.org
source "drivers/staging/kpc2000/Kconfig"
-source "drivers/staging/wusbcore/Kconfig"
-source "drivers/staging/uwb/Kconfig"
-
source "drivers/staging/exfat/Kconfig"
source "drivers/staging/qlge/Kconfig"
obj-$(CONFIG_XIL_AXIS_FIFO) += axis-fifo/
obj-$(CONFIG_FIELDBUS_DEV) += fieldbus/
obj-$(CONFIG_KPC2000) += kpc2000/
-obj-$(CONFIG_UWB) += uwb/
-obj-$(CONFIG_USB_WUSB) += wusbcore/
obj-$(CONFIG_STAGING_EXFAT_FS) += exfat/
obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_NET_VENDOR_HP) += hp/
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# UWB device configuration
-#
-
-menuconfig UWB
- tristate "Ultra Wideband devices"
- default n
- select GENERIC_NET_UTILS
- help
- UWB is a high-bandwidth, low-power, point-to-point radio
- technology using a wide spectrum (3.1-10.6GHz). It is
- optimized for in-room use (480Mbps at 2 meters, 110Mbps at
- 10m). It serves as the transport layer for other protocols,
- such as Wireless USB (WUSB).
-
- The topology is peer to peer; however, higher level
- protocols (such as WUSB) might impose a master/slave
- relationship.
-
- Say Y here if your computer has UWB radio controllers (USB or PCI)
- based. You will need to enable the radio controllers
- below. It is ok to select all of them, no harm done.
-
- For more help check the UWB and WUSB related files in
- <file:Documentation/usb/>.
-
- To compile the UWB stack as a module, choose M here.
-
-if UWB
-
-config UWB_HWA
- tristate "UWB Radio Control driver for WUSB-compliant USB dongles (HWA)"
- depends on USB
- help
- This driver enables the radio controller for HWA USB
- devices. HWA stands for Host Wire Adapter, and it is a UWB
- Radio Controller connected to your system via USB. Most of
- them come with a Wireless USB host controller also.
-
- To compile this driver select Y (built in) or M (module). It
- is safe to select any even if you do not have the hardware.
-
-config UWB_WHCI
- tristate "UWB Radio Control driver for WHCI-compliant cards"
- depends on PCI
- help
- This driver enables the radio controller for WHCI cards.
-
- WHCI is a specification developed by Intel
- (http://www.intel.com/technology/comms/wusb/whci.htm) much
- in the spirit of USB's EHCI, but for UWB and Wireless USB
- radio/host controllers connected via memory mapping (eg:
- PCI). Most of these cards come also with a Wireless USB host
- controller.
-
- To compile this driver select Y (built in) or M (module). It
- is safe to select any even if you do not have the hardware.
-
-config UWB_I1480U
- tristate "Support for Intel Wireless UWB Link 1480 HWA"
- depends on UWB_HWA
- select FW_LOADER
- help
- This driver enables support for the i1480 when connected via
- USB. It consists of a firmware uploader that will enable it
- to behave as an HWA device.
-
- To compile this driver select Y (built in) or M (module). It
- is safe to select any even if you do not have the hardware.
-
-endif # UWB
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_UWB) += uwb.o
-obj-$(CONFIG_UWB_WHCI) += umc.o whci.o whc-rc.o
-obj-$(CONFIG_UWB_HWA) += hwa-rc.o
-obj-$(CONFIG_UWB_I1480U) += i1480/
-
-uwb-objs := \
- address.o \
- allocator.o \
- beacon.o \
- driver.o \
- drp.o \
- drp-avail.o \
- drp-ie.o \
- est.o \
- ie.o \
- ie-rcv.o \
- lc-dev.o \
- lc-rc.o \
- neh.o \
- pal.o \
- radio.o \
- reset.o \
- rsv.o \
- scan.o \
- uwb-debug.o \
- uwbd.o
-
-umc-objs := \
- umc-bus.o \
- umc-dev.o \
- umc-drv.o
+++ /dev/null
-TODO: Remove in late 2019 unless there are users
-
-There seems to not be any real wireless USB devices anywhere in the wild
-anymore. It turned out to be a failed technology :(
-
-This will be removed from the tree if no one objects.
-
-Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * Address management
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- */
-
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/random.h>
-#include <linux/etherdevice.h>
-
-#include "uwb-internal.h"
-
-
-/** Device Address Management command */
-struct uwb_rc_cmd_dev_addr_mgmt {
- struct uwb_rccb rccb;
- u8 bmOperationType;
- u8 baAddr[6];
-} __attribute__((packed));
-
-
-/**
- * Low level command for setting/getting UWB radio's addresses
- *
- * @hwarc: HWA Radio Control interface instance
- * @bmOperationType:
- * Set/get, MAC/DEV (see WUSB1.0[8.6.2.2])
- * @baAddr: address buffer--assumed to have enough data to hold
- * the address type requested.
- * @reply: Pointer to reply buffer (can be stack allocated)
- * @returns: 0 if ok, < 0 errno code on error.
- *
- * @cmd has to be allocated because USB cannot grok USB or vmalloc
- * buffers depending on your combination of host architecture.
- */
-static
-int uwb_rc_dev_addr_mgmt(struct uwb_rc *rc,
- u8 bmOperationType, const u8 *baAddr,
- struct uwb_rc_evt_dev_addr_mgmt *reply)
-{
- int result;
- struct uwb_rc_cmd_dev_addr_mgmt *cmd;
-
- result = -ENOMEM;
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- goto error_kzalloc;
- cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
- cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_DEV_ADDR_MGMT);
- cmd->bmOperationType = bmOperationType;
- if (baAddr) {
- size_t size = 0;
- switch (bmOperationType >> 1) {
- case 0: size = 2; break;
- case 1: size = 6; break;
- default: BUG();
- }
- memcpy(cmd->baAddr, baAddr, size);
- }
- reply->rceb.bEventType = UWB_RC_CET_GENERAL;
- reply->rceb.wEvent = UWB_RC_CMD_DEV_ADDR_MGMT;
- result = uwb_rc_cmd(rc, "DEV-ADDR-MGMT",
- &cmd->rccb, sizeof(*cmd),
- &reply->rceb, sizeof(*reply));
- if (result < 0)
- goto error_cmd;
- if (result < sizeof(*reply)) {
- dev_err(&rc->uwb_dev.dev,
- "DEV-ADDR-MGMT: not enough data replied: "
- "%d vs %zu bytes needed\n", result, sizeof(*reply));
- result = -ENOMSG;
- } else if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
- dev_err(&rc->uwb_dev.dev,
- "DEV-ADDR-MGMT: command execution failed: %s (%d)\n",
- uwb_rc_strerror(reply->bResultCode),
- reply->bResultCode);
- result = -EIO;
- } else
- result = 0;
-error_cmd:
- kfree(cmd);
-error_kzalloc:
- return result;
-}
-
-
-/**
- * Set the UWB RC MAC or device address.
- *
- * @rc: UWB Radio Controller
- * @_addr: Pointer to address to write [assumed to be either a
- * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *'].
- * @type: Type of address to set (UWB_ADDR_DEV or UWB_ADDR_MAC).
- * @returns: 0 if ok, < 0 errno code on error.
- *
- * Some anal retentivity here: even if both 'struct
- * uwb_{dev,mac}_addr' have the actual byte array in the same offset
- * and I could just pass _addr to hwarc_cmd_dev_addr_mgmt(), I prefer
- * to use some syntatic sugar in case someday we decide to change the
- * format of the structs. The compiler will optimize it out anyway.
- */
-static int uwb_rc_addr_set(struct uwb_rc *rc,
- const void *_addr, enum uwb_addr_type type)
-{
- int result;
- u8 bmOperationType = 0x1; /* Set address */
- const struct uwb_dev_addr *dev_addr = _addr;
- const struct uwb_mac_addr *mac_addr = _addr;
- struct uwb_rc_evt_dev_addr_mgmt reply;
- const u8 *baAddr;
-
- result = -EINVAL;
- switch (type) {
- case UWB_ADDR_DEV:
- baAddr = dev_addr->data;
- break;
- case UWB_ADDR_MAC:
- baAddr = mac_addr->data;
- bmOperationType |= 0x2;
- break;
- default:
- return result;
- }
- return uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &reply);
-}
-
-
-/**
- * Get the UWB radio's MAC or device address.
- *
- * @rc: UWB Radio Controller
- * @_addr: Where to write the address data [assumed to be either a
- * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *'].
- * @type: Type of address to get (UWB_ADDR_DEV or UWB_ADDR_MAC).
- * @returns: 0 if ok (and *_addr set), < 0 errno code on error.
- *
- * See comment in uwb_rc_addr_set() about anal retentivity in the
- * type handling of the address variables.
- */
-static int uwb_rc_addr_get(struct uwb_rc *rc,
- void *_addr, enum uwb_addr_type type)
-{
- int result;
- u8 bmOperationType = 0x0; /* Get address */
- struct uwb_rc_evt_dev_addr_mgmt evt;
- struct uwb_dev_addr *dev_addr = _addr;
- struct uwb_mac_addr *mac_addr = _addr;
- u8 *baAddr;
-
- result = -EINVAL;
- switch (type) {
- case UWB_ADDR_DEV:
- baAddr = dev_addr->data;
- break;
- case UWB_ADDR_MAC:
- bmOperationType |= 0x2;
- baAddr = mac_addr->data;
- break;
- default:
- return result;
- }
- result = uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &evt);
- if (result == 0)
- switch (type) {
- case UWB_ADDR_DEV:
- memcpy(&dev_addr->data, evt.baAddr,
- sizeof(dev_addr->data));
- break;
- case UWB_ADDR_MAC:
- memcpy(&mac_addr->data, evt.baAddr,
- sizeof(mac_addr->data));
- break;
- default: /* shut gcc up */
- BUG();
- }
- return result;
-}
-
-
-/** Get @rc's MAC address to @addr */
-int uwb_rc_mac_addr_get(struct uwb_rc *rc,
- struct uwb_mac_addr *addr) {
- return uwb_rc_addr_get(rc, addr, UWB_ADDR_MAC);
-}
-EXPORT_SYMBOL_GPL(uwb_rc_mac_addr_get);
-
-
-/** Get @rc's device address to @addr */
-int uwb_rc_dev_addr_get(struct uwb_rc *rc,
- struct uwb_dev_addr *addr) {
- return uwb_rc_addr_get(rc, addr, UWB_ADDR_DEV);
-}
-EXPORT_SYMBOL_GPL(uwb_rc_dev_addr_get);
-
-
-/** Set @rc's address to @addr */
-int uwb_rc_mac_addr_set(struct uwb_rc *rc,
- const struct uwb_mac_addr *addr)
-{
- int result = -EINVAL;
- mutex_lock(&rc->uwb_dev.mutex);
- result = uwb_rc_addr_set(rc, addr, UWB_ADDR_MAC);
- mutex_unlock(&rc->uwb_dev.mutex);
- return result;
-}
-
-
-/** Set @rc's address to @addr */
-int uwb_rc_dev_addr_set(struct uwb_rc *rc,
- const struct uwb_dev_addr *addr)
-{
- int result = -EINVAL;
- mutex_lock(&rc->uwb_dev.mutex);
- result = uwb_rc_addr_set(rc, addr, UWB_ADDR_DEV);
- rc->uwb_dev.dev_addr = *addr;
- mutex_unlock(&rc->uwb_dev.mutex);
- return result;
-}
-
-/* Returns !0 if given address is already assigned to device. */
-int __uwb_mac_addr_assigned_check(struct device *dev, void *_addr)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_mac_addr *addr = _addr;
-
- if (!uwb_mac_addr_cmp(addr, &uwb_dev->mac_addr))
- return !0;
- return 0;
-}
-
-/* Returns !0 if given address is already assigned to device. */
-int __uwb_dev_addr_assigned_check(struct device *dev, void *_addr)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_dev_addr *addr = _addr;
- if (!uwb_dev_addr_cmp(addr, &uwb_dev->dev_addr))
- return !0;
- return 0;
-}
-
-/**
- * uwb_dev_addr_assign - assigned a generated DevAddr to a radio controller
- * @rc: the (local) radio controller device requiring a new DevAddr
- *
- * A new DevAddr is required when:
- * - first setting up a radio controller
- * - if the hardware reports a DevAddr conflict
- *
- * The DevAddr is randomly generated in the generated DevAddr range
- * [0x100, 0xfeff]. The number of devices in a beacon group is limited
- * by mMaxBPLength (96) so this address space will never be exhausted.
- *
- * [ECMA-368] 17.1.1, 17.16.
- */
-int uwb_rc_dev_addr_assign(struct uwb_rc *rc)
-{
- struct uwb_dev_addr new_addr;
-
- do {
- get_random_bytes(new_addr.data, sizeof(new_addr.data));
- } while (new_addr.data[0] == 0x00 || new_addr.data[0] == 0xff
- || __uwb_dev_addr_assigned(rc, &new_addr));
-
- return uwb_rc_dev_addr_set(rc, &new_addr);
-}
-
-/**
- * uwbd_evt_handle_rc_dev_addr_conflict - handle a DEV_ADDR_CONFLICT event
- * @evt: the DEV_ADDR_CONFLICT notification from the radio controller
- *
- * A new (non-conflicting) DevAddr is assigned to the radio controller.
- *
- * [ECMA-368] 17.1.1.1.
- */
-int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt)
-{
- struct uwb_rc *rc = evt->rc;
-
- return uwb_rc_dev_addr_assign(rc);
-}
-
-/*
- * Print the 48-bit EUI MAC address of the radio controller when
- * reading /sys/class/uwb_rc/XX/mac_address
- */
-static ssize_t uwb_rc_mac_addr_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_rc *rc = uwb_dev->rc;
- struct uwb_mac_addr addr;
- ssize_t result;
-
- mutex_lock(&rc->uwb_dev.mutex);
- result = uwb_rc_addr_get(rc, &addr, UWB_ADDR_MAC);
- mutex_unlock(&rc->uwb_dev.mutex);
- if (result >= 0) {
- result = uwb_mac_addr_print(buf, UWB_ADDR_STRSIZE, &addr);
- buf[result++] = '\n';
- }
- return result;
-}
-
-/*
- * Parse a 48 bit address written to /sys/class/uwb_rc/XX/mac_address
- * and if correct, set it.
- */
-static ssize_t uwb_rc_mac_addr_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_rc *rc = uwb_dev->rc;
- struct uwb_mac_addr addr;
- ssize_t result;
-
- if (!mac_pton(buf, addr.data))
- return -EINVAL;
- if (is_multicast_ether_addr(addr.data)) {
- dev_err(&rc->uwb_dev.dev, "refusing to set multicast "
- "MAC address %s\n", buf);
- return -EINVAL;
- }
- result = uwb_rc_mac_addr_set(rc, &addr);
- if (result == 0)
- rc->uwb_dev.mac_addr = addr;
-
- return result < 0 ? result : size;
-}
-DEVICE_ATTR(mac_address, S_IRUGO | S_IWUSR, uwb_rc_mac_addr_show, uwb_rc_mac_addr_store);
-
-/** Print @addr to @buf, @return bytes written */
-size_t __uwb_addr_print(char *buf, size_t buf_size, const unsigned char *addr,
- int type)
-{
- size_t result;
- if (type)
- result = scnprintf(buf, buf_size, "%pM", addr);
- else
- result = scnprintf(buf, buf_size, "%02x:%02x",
- addr[1], addr[0]);
- return result;
-}
-EXPORT_SYMBOL_GPL(__uwb_addr_print);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * UWB reservation management.
- *
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include "uwb.h"
-
-#include "uwb-internal.h"
-
-static void uwb_rsv_fill_column_alloc(struct uwb_rsv_alloc_info *ai)
-{
- int col, mas, safe_mas, unsafe_mas;
- unsigned char *bm = ai->bm;
- struct uwb_rsv_col_info *ci = ai->ci;
- unsigned char c;
-
- for (col = ci->csi.start_col; col < UWB_NUM_ZONES; col += ci->csi.interval) {
-
- safe_mas = ci->csi.safe_mas_per_col;
- unsafe_mas = ci->csi.unsafe_mas_per_col;
-
- for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++ ) {
- if (bm[col * UWB_MAS_PER_ZONE + mas] == 0) {
-
- if (safe_mas > 0) {
- safe_mas--;
- c = UWB_RSV_MAS_SAFE;
- } else if (unsafe_mas > 0) {
- unsafe_mas--;
- c = UWB_RSV_MAS_UNSAFE;
- } else {
- break;
- }
- bm[col * UWB_MAS_PER_ZONE + mas] = c;
- }
- }
- }
-}
-
-static void uwb_rsv_fill_row_alloc(struct uwb_rsv_alloc_info *ai)
-{
- int mas, col, rows;
- unsigned char *bm = ai->bm;
- struct uwb_rsv_row_info *ri = &ai->ri;
- unsigned char c;
-
- rows = 1;
- c = UWB_RSV_MAS_SAFE;
- for (mas = UWB_MAS_PER_ZONE - 1; mas >= 0; mas--) {
- if (ri->avail[mas] == 1) {
-
- if (rows > ri->used_rows) {
- break;
- } else if (rows > 7) {
- c = UWB_RSV_MAS_UNSAFE;
- }
-
- for (col = 0; col < UWB_NUM_ZONES; col++) {
- if (bm[col * UWB_NUM_ZONES + mas] != UWB_RSV_MAS_NOT_AVAIL) {
- bm[col * UWB_NUM_ZONES + mas] = c;
- if(c == UWB_RSV_MAS_SAFE)
- ai->safe_allocated_mases++;
- else
- ai->unsafe_allocated_mases++;
- }
- }
- rows++;
- }
- }
- ai->total_allocated_mases = ai->safe_allocated_mases + ai->unsafe_allocated_mases;
-}
-
-/*
- * Find the best column set for a given availability, interval, num safe mas and
- * num unsafe mas.
- *
- * The different sets are tried in order as shown below, depending on the interval.
- *
- * interval = 16
- * deep = 0
- * set 1 -> { 8 }
- * deep = 1
- * set 1 -> { 4 }
- * set 2 -> { 12 }
- * deep = 2
- * set 1 -> { 2 }
- * set 2 -> { 6 }
- * set 3 -> { 10 }
- * set 4 -> { 14 }
- * deep = 3
- * set 1 -> { 1 }
- * set 2 -> { 3 }
- * set 3 -> { 5 }
- * set 4 -> { 7 }
- * set 5 -> { 9 }
- * set 6 -> { 11 }
- * set 7 -> { 13 }
- * set 8 -> { 15 }
- *
- * interval = 8
- * deep = 0
- * set 1 -> { 4 12 }
- * deep = 1
- * set 1 -> { 2 10 }
- * set 2 -> { 6 14 }
- * deep = 2
- * set 1 -> { 1 9 }
- * set 2 -> { 3 11 }
- * set 3 -> { 5 13 }
- * set 4 -> { 7 15 }
- *
- * interval = 4
- * deep = 0
- * set 1 -> { 2 6 10 14 }
- * deep = 1
- * set 1 -> { 1 5 9 13 }
- * set 2 -> { 3 7 11 15 }
- *
- * interval = 2
- * deep = 0
- * set 1 -> { 1 3 5 7 9 11 13 15 }
- */
-static int uwb_rsv_find_best_column_set(struct uwb_rsv_alloc_info *ai, int interval,
- int num_safe_mas, int num_unsafe_mas)
-{
- struct uwb_rsv_col_info *ci = ai->ci;
- struct uwb_rsv_col_set_info *csi = &ci->csi;
- struct uwb_rsv_col_set_info tmp_csi;
- int deep, set, col, start_col_deep, col_start_set;
- int start_col, max_mas_in_set, lowest_max_mas_in_deep;
- int n_mas;
- int found = UWB_RSV_ALLOC_NOT_FOUND;
-
- tmp_csi.start_col = 0;
- start_col_deep = interval;
- n_mas = num_unsafe_mas + num_safe_mas;
-
- for (deep = 0; ((interval >> deep) & 0x1) == 0; deep++) {
- start_col_deep /= 2;
- col_start_set = 0;
- lowest_max_mas_in_deep = UWB_MAS_PER_ZONE;
-
- for (set = 1; set <= (1 << deep); set++) {
- max_mas_in_set = 0;
- start_col = start_col_deep + col_start_set;
- for (col = start_col; col < UWB_NUM_ZONES; col += interval) {
-
- if (ci[col].max_avail_safe >= num_safe_mas &&
- ci[col].max_avail_unsafe >= n_mas) {
- if (ci[col].highest_mas[n_mas] > max_mas_in_set)
- max_mas_in_set = ci[col].highest_mas[n_mas];
- } else {
- max_mas_in_set = 0;
- break;
- }
- }
- if ((lowest_max_mas_in_deep > max_mas_in_set) && max_mas_in_set) {
- lowest_max_mas_in_deep = max_mas_in_set;
-
- tmp_csi.start_col = start_col;
- }
- col_start_set += (interval >> deep);
- }
-
- if (lowest_max_mas_in_deep < 8) {
- csi->start_col = tmp_csi.start_col;
- found = UWB_RSV_ALLOC_FOUND;
- break;
- } else if ((lowest_max_mas_in_deep > 8) &&
- (lowest_max_mas_in_deep != UWB_MAS_PER_ZONE) &&
- (found == UWB_RSV_ALLOC_NOT_FOUND)) {
- csi->start_col = tmp_csi.start_col;
- found = UWB_RSV_ALLOC_FOUND;
- }
- }
-
- if (found == UWB_RSV_ALLOC_FOUND) {
- csi->interval = interval;
- csi->safe_mas_per_col = num_safe_mas;
- csi->unsafe_mas_per_col = num_unsafe_mas;
-
- ai->safe_allocated_mases = (UWB_NUM_ZONES / interval) * num_safe_mas;
- ai->unsafe_allocated_mases = (UWB_NUM_ZONES / interval) * num_unsafe_mas;
- ai->total_allocated_mases = ai->safe_allocated_mases + ai->unsafe_allocated_mases;
- ai->interval = interval;
- }
- return found;
-}
-
-static void get_row_descriptors(struct uwb_rsv_alloc_info *ai)
-{
- unsigned char *bm = ai->bm;
- struct uwb_rsv_row_info *ri = &ai->ri;
- int col, mas;
-
- ri->free_rows = 16;
- for (mas = 0; mas < UWB_MAS_PER_ZONE; mas ++) {
- ri->avail[mas] = 1;
- for (col = 1; col < UWB_NUM_ZONES; col++) {
- if (bm[col * UWB_NUM_ZONES + mas] == UWB_RSV_MAS_NOT_AVAIL) {
- ri->free_rows--;
- ri->avail[mas]=0;
- break;
- }
- }
- }
-}
-
-static void uwb_rsv_fill_column_info(unsigned char *bm, int column, struct uwb_rsv_col_info *rci)
-{
- int mas;
- int block_count = 0, start_block = 0;
- int previous_avail = 0;
- int available = 0;
- int safe_mas_in_row[UWB_MAS_PER_ZONE] = {
- 8, 7, 6, 5, 4, 4, 4, 4, 4, 4, 4, 4, 4, 3, 2, 1,
- };
-
- rci->max_avail_safe = 0;
-
- for (mas = 0; mas < UWB_MAS_PER_ZONE; mas ++) {
- if (!bm[column * UWB_NUM_ZONES + mas]) {
- available++;
- rci->max_avail_unsafe = available;
-
- rci->highest_mas[available] = mas;
-
- if (previous_avail) {
- block_count++;
- if ((block_count > safe_mas_in_row[start_block]) &&
- (!rci->max_avail_safe))
- rci->max_avail_safe = available - 1;
- } else {
- previous_avail = 1;
- start_block = mas;
- block_count = 1;
- }
- } else {
- previous_avail = 0;
- }
- }
- if (!rci->max_avail_safe)
- rci->max_avail_safe = rci->max_avail_unsafe;
-}
-
-static void get_column_descriptors(struct uwb_rsv_alloc_info *ai)
-{
- unsigned char *bm = ai->bm;
- struct uwb_rsv_col_info *ci = ai->ci;
- int col;
-
- for (col = 1; col < UWB_NUM_ZONES; col++) {
- uwb_rsv_fill_column_info(bm, col, &ci[col]);
- }
-}
-
-static int uwb_rsv_find_best_row_alloc(struct uwb_rsv_alloc_info *ai)
-{
- int n_rows;
- int max_rows = ai->max_mas / UWB_USABLE_MAS_PER_ROW;
- int min_rows = ai->min_mas / UWB_USABLE_MAS_PER_ROW;
- if (ai->min_mas % UWB_USABLE_MAS_PER_ROW)
- min_rows++;
- for (n_rows = max_rows; n_rows >= min_rows; n_rows--) {
- if (n_rows <= ai->ri.free_rows) {
- ai->ri.used_rows = n_rows;
- ai->interval = 1; /* row reservation */
- uwb_rsv_fill_row_alloc(ai);
- return UWB_RSV_ALLOC_FOUND;
- }
- }
- return UWB_RSV_ALLOC_NOT_FOUND;
-}
-
-static int uwb_rsv_find_best_col_alloc(struct uwb_rsv_alloc_info *ai, int interval)
-{
- int n_safe, n_unsafe, n_mas;
- int n_column = UWB_NUM_ZONES / interval;
- int max_per_zone = ai->max_mas / n_column;
- int min_per_zone = ai->min_mas / n_column;
-
- if (ai->min_mas % n_column)
- min_per_zone++;
-
- if (min_per_zone > UWB_MAS_PER_ZONE) {
- return UWB_RSV_ALLOC_NOT_FOUND;
- }
-
- if (max_per_zone > UWB_MAS_PER_ZONE) {
- max_per_zone = UWB_MAS_PER_ZONE;
- }
-
- for (n_mas = max_per_zone; n_mas >= min_per_zone; n_mas--) {
- if (uwb_rsv_find_best_column_set(ai, interval, 0, n_mas) == UWB_RSV_ALLOC_NOT_FOUND)
- continue;
- for (n_safe = n_mas; n_safe >= 0; n_safe--) {
- n_unsafe = n_mas - n_safe;
- if (uwb_rsv_find_best_column_set(ai, interval, n_safe, n_unsafe) == UWB_RSV_ALLOC_FOUND) {
- uwb_rsv_fill_column_alloc(ai);
- return UWB_RSV_ALLOC_FOUND;
- }
- }
- }
- return UWB_RSV_ALLOC_NOT_FOUND;
-}
-
-int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv, struct uwb_mas_bm *available,
- struct uwb_mas_bm *result)
-{
- struct uwb_rsv_alloc_info *ai;
- int interval;
- int bit_index;
-
- ai = kzalloc(sizeof(struct uwb_rsv_alloc_info), GFP_KERNEL);
- if (!ai)
- return UWB_RSV_ALLOC_NOT_FOUND;
- ai->min_mas = rsv->min_mas;
- ai->max_mas = rsv->max_mas;
- ai->max_interval = rsv->max_interval;
-
-
- /* fill the not available vector from the available bm */
- for_each_clear_bit(bit_index, available->bm, UWB_NUM_MAS)
- ai->bm[bit_index] = UWB_RSV_MAS_NOT_AVAIL;
-
- if (ai->max_interval == 1) {
- get_row_descriptors(ai);
- if (uwb_rsv_find_best_row_alloc(ai) == UWB_RSV_ALLOC_FOUND)
- goto alloc_found;
- else
- goto alloc_not_found;
- }
-
- get_column_descriptors(ai);
-
- for (interval = 16; interval >= 2; interval>>=1) {
- if (interval > ai->max_interval)
- continue;
- if (uwb_rsv_find_best_col_alloc(ai, interval) == UWB_RSV_ALLOC_FOUND)
- goto alloc_found;
- }
-
- /* try row reservation if no column is found */
- get_row_descriptors(ai);
- if (uwb_rsv_find_best_row_alloc(ai) == UWB_RSV_ALLOC_FOUND)
- goto alloc_found;
- else
- goto alloc_not_found;
-
- alloc_found:
- bitmap_zero(result->bm, UWB_NUM_MAS);
- bitmap_zero(result->unsafe_bm, UWB_NUM_MAS);
- /* fill the safe and unsafe bitmaps */
- for (bit_index = 0; bit_index < UWB_NUM_MAS; bit_index++) {
- if (ai->bm[bit_index] == UWB_RSV_MAS_SAFE)
- set_bit(bit_index, result->bm);
- else if (ai->bm[bit_index] == UWB_RSV_MAS_UNSAFE)
- set_bit(bit_index, result->unsafe_bm);
- }
- bitmap_or(result->bm, result->bm, result->unsafe_bm, UWB_NUM_MAS);
-
- result->safe = ai->safe_allocated_mases;
- result->unsafe = ai->unsafe_allocated_mases;
-
- kfree(ai);
- return UWB_RSV_ALLOC_FOUND;
-
- alloc_not_found:
- kfree(ai);
- return UWB_RSV_ALLOC_NOT_FOUND;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * Beacon management
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/kdev_t.h>
-#include <linux/slab.h>
-
-#include "uwb-internal.h"
-
-/* Start Beaconing command structure */
-struct uwb_rc_cmd_start_beacon {
- struct uwb_rccb rccb;
- __le16 wBPSTOffset;
- u8 bChannelNumber;
-} __attribute__((packed));
-
-
-static int uwb_rc_start_beacon(struct uwb_rc *rc, u16 bpst_offset, u8 channel)
-{
- int result;
- struct uwb_rc_cmd_start_beacon *cmd;
- struct uwb_rc_evt_confirm reply;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
- cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
- cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_START_BEACON);
- cmd->wBPSTOffset = cpu_to_le16(bpst_offset);
- cmd->bChannelNumber = channel;
- reply.rceb.bEventType = UWB_RC_CET_GENERAL;
- reply.rceb.wEvent = UWB_RC_CMD_START_BEACON;
- result = uwb_rc_cmd(rc, "START-BEACON", &cmd->rccb, sizeof(*cmd),
- &reply.rceb, sizeof(reply));
- if (result < 0)
- goto error_cmd;
- if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
- dev_err(&rc->uwb_dev.dev,
- "START-BEACON: command execution failed: %s (%d)\n",
- uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
- result = -EIO;
- }
-error_cmd:
- kfree(cmd);
- return result;
-}
-
-static int uwb_rc_stop_beacon(struct uwb_rc *rc)
-{
- int result;
- struct uwb_rccb *cmd;
- struct uwb_rc_evt_confirm reply;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
- cmd->bCommandType = UWB_RC_CET_GENERAL;
- cmd->wCommand = cpu_to_le16(UWB_RC_CMD_STOP_BEACON);
- reply.rceb.bEventType = UWB_RC_CET_GENERAL;
- reply.rceb.wEvent = UWB_RC_CMD_STOP_BEACON;
- result = uwb_rc_cmd(rc, "STOP-BEACON", cmd, sizeof(*cmd),
- &reply.rceb, sizeof(reply));
- if (result < 0)
- goto error_cmd;
- if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
- dev_err(&rc->uwb_dev.dev,
- "STOP-BEACON: command execution failed: %s (%d)\n",
- uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
- result = -EIO;
- }
-error_cmd:
- kfree(cmd);
- return result;
-}
-
-/*
- * Start/stop beacons
- *
- * @rc: UWB Radio Controller to operate on
- * @channel: UWB channel on which to beacon (WUSB[table
- * 5-12]). If -1, stop beaconing.
- * @bpst_offset: Beacon Period Start Time offset; FIXME-do zero
- *
- * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB
- * of a SET IE command after the device sent the first beacon that includes
- * the IEs specified in the SET IE command. So, after we start beaconing we
- * check if there is anything in the IE cache and call the SET IE command
- * if needed.
- */
-int uwb_rc_beacon(struct uwb_rc *rc, int channel, unsigned bpst_offset)
-{
- int result;
- struct device *dev = &rc->uwb_dev.dev;
-
- dev_dbg(dev, "%s: channel = %d\n", __func__, channel);
- if (channel < 0)
- channel = -1;
- if (channel == -1)
- result = uwb_rc_stop_beacon(rc);
- else {
- /* channel >= 0...dah */
- result = uwb_rc_start_beacon(rc, bpst_offset, channel);
- if (result < 0) {
- dev_err(dev, "Cannot start beaconing: %d\n", result);
- return result;
- }
- if (le16_to_cpu(rc->ies->wIELength) > 0) {
- result = uwb_rc_set_ie(rc, rc->ies);
- if (result < 0) {
- dev_err(dev, "Cannot set new IE on device: "
- "%d\n", result);
- result = uwb_rc_stop_beacon(rc);
- channel = -1;
- bpst_offset = 0;
- }
- }
- }
-
- if (result >= 0)
- rc->beaconing = channel;
- return result;
-}
-
-/*
- * Beacon cache
- *
- * The purpose of this is to speed up the lookup of becon information
- * when a new beacon arrives. The UWB Daemon uses it also to keep a
- * tab of which devices are in radio distance and which not. When a
- * device's beacon stays present for more than a certain amount of
- * time, it is considered a new, usable device. When a beacon ceases
- * to be received for a certain amount of time, it is considered that
- * the device is gone.
- *
- * FIXME: use an allocator for the entries
- * FIXME: use something faster for search than a list
- */
-
-void uwb_bce_kfree(struct kref *_bce)
-{
- struct uwb_beca_e *bce = container_of(_bce, struct uwb_beca_e, refcnt);
-
- kfree(bce->be);
- kfree(bce);
-}
-
-
-/* Find a beacon by dev addr in the cache */
-static
-struct uwb_beca_e *__uwb_beca_find_bydev(struct uwb_rc *rc,
- const struct uwb_dev_addr *dev_addr)
-{
- struct uwb_beca_e *bce, *next;
- list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
- if (!memcmp(&bce->dev_addr, dev_addr, sizeof(bce->dev_addr)))
- goto out;
- }
- bce = NULL;
-out:
- return bce;
-}
-
-/* Find a beacon by dev addr in the cache */
-static
-struct uwb_beca_e *__uwb_beca_find_bymac(struct uwb_rc *rc,
- const struct uwb_mac_addr *mac_addr)
-{
- struct uwb_beca_e *bce, *next;
- list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
- if (!memcmp(bce->mac_addr, mac_addr->data,
- sizeof(struct uwb_mac_addr)))
- goto out;
- }
- bce = NULL;
-out:
- return bce;
-}
-
-/**
- * uwb_dev_get_by_devaddr - get a UWB device with a specific DevAddr
- * @rc: the radio controller that saw the device
- * @devaddr: DevAddr of the UWB device to find
- *
- * There may be more than one matching device (in the case of a
- * DevAddr conflict), but only the first one is returned.
- */
-struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
- const struct uwb_dev_addr *devaddr)
-{
- struct uwb_dev *found = NULL;
- struct uwb_beca_e *bce;
-
- mutex_lock(&rc->uwb_beca.mutex);
- bce = __uwb_beca_find_bydev(rc, devaddr);
- if (bce)
- found = uwb_dev_try_get(rc, bce->uwb_dev);
- mutex_unlock(&rc->uwb_beca.mutex);
-
- return found;
-}
-
-/**
- * uwb_dev_get_by_macaddr - get a UWB device with a specific EUI-48
- * @rc: the radio controller that saw the device
- * @devaddr: EUI-48 of the UWB device to find
- */
-struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc,
- const struct uwb_mac_addr *macaddr)
-{
- struct uwb_dev *found = NULL;
- struct uwb_beca_e *bce;
-
- mutex_lock(&rc->uwb_beca.mutex);
- bce = __uwb_beca_find_bymac(rc, macaddr);
- if (bce)
- found = uwb_dev_try_get(rc, bce->uwb_dev);
- mutex_unlock(&rc->uwb_beca.mutex);
-
- return found;
-}
-
-/* Initialize a beacon cache entry */
-static void uwb_beca_e_init(struct uwb_beca_e *bce)
-{
- mutex_init(&bce->mutex);
- kref_init(&bce->refcnt);
- stats_init(&bce->lqe_stats);
- stats_init(&bce->rssi_stats);
-}
-
-/*
- * Add a beacon to the cache
- *
- * @be: Beacon event information
- * @bf: Beacon frame (part of b, really)
- * @ts_jiffies: Timestamp (in jiffies) when the beacon was received
- */
-static
-struct uwb_beca_e *__uwb_beca_add(struct uwb_rc *rc,
- struct uwb_rc_evt_beacon *be,
- struct uwb_beacon_frame *bf,
- unsigned long ts_jiffies)
-{
- struct uwb_beca_e *bce;
-
- bce = kzalloc(sizeof(*bce), GFP_KERNEL);
- if (bce == NULL)
- return NULL;
- uwb_beca_e_init(bce);
- bce->ts_jiffies = ts_jiffies;
- bce->uwb_dev = NULL;
- list_add(&bce->node, &rc->uwb_beca.list);
- return bce;
-}
-
-/*
- * Wipe out beacon entries that became stale
- *
- * Remove associated devicest too.
- */
-void uwb_beca_purge(struct uwb_rc *rc)
-{
- struct uwb_beca_e *bce, *next;
- unsigned long expires;
-
- mutex_lock(&rc->uwb_beca.mutex);
- list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
- expires = bce->ts_jiffies + msecs_to_jiffies(beacon_timeout_ms);
- if (time_after(jiffies, expires)) {
- uwbd_dev_offair(bce);
- }
- }
- mutex_unlock(&rc->uwb_beca.mutex);
-}
-
-/* Clean up the whole beacon cache. Called on shutdown */
-void uwb_beca_release(struct uwb_rc *rc)
-{
- struct uwb_beca_e *bce, *next;
-
- mutex_lock(&rc->uwb_beca.mutex);
- list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) {
- list_del(&bce->node);
- uwb_bce_put(bce);
- }
- mutex_unlock(&rc->uwb_beca.mutex);
-}
-
-static void uwb_beacon_print(struct uwb_rc *rc, struct uwb_rc_evt_beacon *be,
- struct uwb_beacon_frame *bf)
-{
- char macbuf[UWB_ADDR_STRSIZE];
- char devbuf[UWB_ADDR_STRSIZE];
- char dstbuf[UWB_ADDR_STRSIZE];
-
- uwb_mac_addr_print(macbuf, sizeof(macbuf), &bf->Device_Identifier);
- uwb_dev_addr_print(devbuf, sizeof(devbuf), &bf->hdr.SrcAddr);
- uwb_dev_addr_print(dstbuf, sizeof(dstbuf), &bf->hdr.DestAddr);
- dev_info(&rc->uwb_dev.dev,
- "BEACON from %s to %s (ch%u offset %u slot %u MAC %s)\n",
- devbuf, dstbuf, be->bChannelNumber, be->wBPSTOffset,
- bf->Beacon_Slot_Number, macbuf);
-}
-
-/*
- * @bce: beacon cache entry, referenced
- */
-ssize_t uwb_bce_print_IEs(struct uwb_dev *uwb_dev, struct uwb_beca_e *bce,
- char *buf, size_t size)
-{
- ssize_t result = 0;
- struct uwb_rc_evt_beacon *be;
- struct uwb_beacon_frame *bf;
- int ies_len;
- struct uwb_ie_hdr *ies;
-
- mutex_lock(&bce->mutex);
-
- be = bce->be;
- if (be) {
- bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo;
- ies_len = be->wBeaconInfoLength - sizeof(struct uwb_beacon_frame);
- ies = (struct uwb_ie_hdr *)bf->IEData;
-
- result = uwb_ie_dump_hex(ies, ies_len, buf, size);
- }
-
- mutex_unlock(&bce->mutex);
-
- return result;
-}
-
-/*
- * Verify that the beacon event, frame and IEs are ok
- */
-static int uwb_verify_beacon(struct uwb_rc *rc, struct uwb_event *evt,
- struct uwb_rc_evt_beacon *be)
-{
- int result = -EINVAL;
- struct uwb_beacon_frame *bf;
- struct device *dev = &rc->uwb_dev.dev;
-
- /* Is there enough data to decode a beacon frame? */
- if (evt->notif.size < sizeof(*be) + sizeof(*bf)) {
- dev_err(dev, "BEACON event: Not enough data to decode "
- "(%zu vs %zu bytes needed)\n", evt->notif.size,
- sizeof(*be) + sizeof(*bf));
- goto error;
- }
- /* FIXME: make sure beacon frame IEs are fine and that the whole thing
- * is consistent */
- result = 0;
-error:
- return result;
-}
-
-/*
- * Handle UWB_RC_EVT_BEACON events
- *
- * We check the beacon cache to see how the received beacon fares. If
- * is there already we refresh the timestamp. If not we create a new
- * entry.
- *
- * According to the WHCI and WUSB specs, only one beacon frame is
- * allowed per notification block, so we don't bother about scanning
- * for more.
- */
-int uwbd_evt_handle_rc_beacon(struct uwb_event *evt)
-{
- int result = -EINVAL;
- struct uwb_rc *rc;
- struct uwb_rc_evt_beacon *be;
- struct uwb_beacon_frame *bf;
- struct uwb_beca_e *bce;
-
- rc = evt->rc;
- be = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon, rceb);
- result = uwb_verify_beacon(rc, evt, be);
- if (result < 0)
- return result;
-
- /* FIXME: handle alien beacons. */
- if (be->bBeaconType == UWB_RC_BEACON_TYPE_OL_ALIEN ||
- be->bBeaconType == UWB_RC_BEACON_TYPE_NOL_ALIEN) {
- return -ENOSYS;
- }
-
- bf = (struct uwb_beacon_frame *) be->BeaconInfo;
-
- /*
- * Drop beacons from devices with a NULL EUI-48 -- they cannot
- * be uniquely identified.
- *
- * It's expected that these will all be WUSB devices and they
- * have a WUSB specific connection method so ignoring them
- * here shouldn't be a problem.
- */
- if (uwb_mac_addr_bcast(&bf->Device_Identifier))
- return 0;
-
- mutex_lock(&rc->uwb_beca.mutex);
- bce = __uwb_beca_find_bymac(rc, &bf->Device_Identifier);
- if (bce == NULL) {
- /* Not in there, a new device is pinging */
- uwb_beacon_print(evt->rc, be, bf);
- bce = __uwb_beca_add(rc, be, bf, evt->ts_jiffies);
- if (bce == NULL) {
- mutex_unlock(&rc->uwb_beca.mutex);
- return -ENOMEM;
- }
- }
- mutex_unlock(&rc->uwb_beca.mutex);
-
- mutex_lock(&bce->mutex);
- /* purge old beacon data */
- kfree(bce->be);
-
- /* Update commonly used fields */
- bce->ts_jiffies = evt->ts_jiffies;
- bce->be = be;
- bce->dev_addr = bf->hdr.SrcAddr;
- bce->mac_addr = &bf->Device_Identifier;
- be->wBPSTOffset = le16_to_cpu(be->wBPSTOffset);
- be->wBeaconInfoLength = le16_to_cpu(be->wBeaconInfoLength);
- stats_add_sample(&bce->lqe_stats, be->bLQI - 7);
- stats_add_sample(&bce->rssi_stats, be->bRSSI + 18);
-
- /*
- * This might be a beacon from a new device.
- */
- if (bce->uwb_dev == NULL)
- uwbd_dev_onair(evt->rc, bce);
-
- mutex_unlock(&bce->mutex);
-
- return 1; /* we keep the event data */
-}
-
-/*
- * Handle UWB_RC_EVT_BEACON_SIZE events
- *
- * XXXXX
- */
-int uwbd_evt_handle_rc_beacon_size(struct uwb_event *evt)
-{
- int result = -EINVAL;
- struct device *dev = &evt->rc->uwb_dev.dev;
- struct uwb_rc_evt_beacon_size *bs;
-
- /* Is there enough data to decode the event? */
- if (evt->notif.size < sizeof(*bs)) {
- dev_err(dev, "BEACON SIZE notification: Not enough data to "
- "decode (%zu vs %zu bytes needed)\n",
- evt->notif.size, sizeof(*bs));
- goto error;
- }
- bs = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon_size, rceb);
- if (0)
- dev_info(dev, "Beacon size changed to %u bytes "
- "(FIXME: action?)\n", le16_to_cpu(bs->wNewBeaconSize));
- else {
- /* temporary hack until we do something with this message... */
- static unsigned count;
- if (++count % 1000 == 0)
- dev_info(dev, "Beacon size changed %u times "
- "(FIXME: action?)\n", count);
- }
- result = 0;
-error:
- return result;
-}
-
-/**
- * uwbd_evt_handle_rc_bp_slot_change - handle a BP_SLOT_CHANGE event
- * @evt: the BP_SLOT_CHANGE notification from the radio controller
- *
- * If the event indicates that no beacon period slots were available
- * then radio controller has transitioned to a non-beaconing state.
- * Otherwise, simply save the current beacon slot.
- */
-int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *evt)
-{
- struct uwb_rc *rc = evt->rc;
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_rc_evt_bp_slot_change *bpsc;
-
- if (evt->notif.size < sizeof(*bpsc)) {
- dev_err(dev, "BP SLOT CHANGE event: Not enough data\n");
- return -EINVAL;
- }
- bpsc = container_of(evt->notif.rceb, struct uwb_rc_evt_bp_slot_change, rceb);
-
- if (uwb_rc_evt_bp_slot_change_no_slot(bpsc)) {
- dev_err(dev, "stopped beaconing: No free slots in BP\n");
- mutex_lock(&rc->uwb_dev.mutex);
- rc->beaconing = -1;
- mutex_unlock(&rc->uwb_dev.mutex);
- } else
- rc->uwb_dev.beacon_slot = uwb_rc_evt_bp_slot_change_slot_num(bpsc);
-
- return 0;
-}
-
-/**
- * Handle UWB_RC_EVT_BPOIE_CHANGE events
- *
- * XXXXX
- */
-struct uwb_ie_bpo {
- struct uwb_ie_hdr hdr;
- u8 bp_length;
- u8 data[];
-} __attribute__((packed));
-
-int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *evt)
-{
- int result = -EINVAL;
- struct device *dev = &evt->rc->uwb_dev.dev;
- struct uwb_rc_evt_bpoie_change *bpoiec;
- struct uwb_ie_bpo *bpoie;
- static unsigned count; /* FIXME: this is a temp hack */
- size_t iesize;
-
- /* Is there enough data to decode it? */
- if (evt->notif.size < sizeof(*bpoiec)) {
- dev_err(dev, "BPOIEC notification: Not enough data to "
- "decode (%zu vs %zu bytes needed)\n",
- evt->notif.size, sizeof(*bpoiec));
- goto error;
- }
- bpoiec = container_of(evt->notif.rceb, struct uwb_rc_evt_bpoie_change, rceb);
- iesize = le16_to_cpu(bpoiec->wBPOIELength);
- if (iesize < sizeof(*bpoie)) {
- dev_err(dev, "BPOIEC notification: Not enough IE data to "
- "decode (%zu vs %zu bytes needed)\n",
- iesize, sizeof(*bpoie));
- goto error;
- }
- if (++count % 1000 == 0) /* Lame placeholder */
- dev_info(dev, "BPOIE: %u changes received\n", count);
- /*
- * FIXME: At this point we should go over all the IEs in the
- * bpoiec->BPOIE array and act on each.
- */
- result = 0;
-error:
- return result;
-}
-
-/*
- * Print beaconing state.
- */
-static ssize_t uwb_rc_beacon_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_rc *rc = uwb_dev->rc;
- ssize_t result;
-
- mutex_lock(&rc->uwb_dev.mutex);
- result = sprintf(buf, "%d\n", rc->beaconing);
- mutex_unlock(&rc->uwb_dev.mutex);
- return result;
-}
-
-/*
- * Start beaconing on the specified channel, or stop beaconing.
- */
-static ssize_t uwb_rc_beacon_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_rc *rc = uwb_dev->rc;
- int channel;
- ssize_t result = -EINVAL;
-
- result = sscanf(buf, "%d", &channel);
- if (result >= 1)
- result = uwb_radio_force_channel(rc, channel);
-
- return result < 0 ? result : size;
-}
-DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, uwb_rc_beacon_show, uwb_rc_beacon_store);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * Driver initialization, etc
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- *
- * Life cycle: FIXME: explain
- *
- * UWB radio controller:
- *
- * 1. alloc a uwb_rc, zero it
- * 2. call uwb_rc_init() on it to set it up + ops (won't do any
- * kind of allocation)
- * 3. register (now it is owned by the UWB stack--deregister before
- * freeing/destroying).
- * 4. It lives on it's own now (UWB stack handles)--when it
- * disconnects, call unregister()
- * 5. free it.
- *
- * Make sure you have a reference to the uwb_rc before calling
- * any of the UWB API functions.
- *
- * TODO:
- *
- * 1. Locking and life cycle management is crappy still. All entry
- * points to the UWB HCD API assume you have a reference on the
- * uwb_rc structure and that it won't go away. They mutex lock it
- * before doing anything.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/kdev_t.h>
-#include <linux/random.h>
-
-#include "uwb-internal.h"
-
-
-/* UWB stack attributes (or 'global' constants) */
-
-
-/**
- * If a beacon disappears for longer than this, then we consider the
- * device who was represented by that beacon to be gone.
- *
- * ECMA-368[17.2.3, last para] establishes that a device must not
- * consider a device to be its neighbour if he doesn't receive a beacon
- * for more than mMaxLostBeacons. mMaxLostBeacons is defined in
- * ECMA-368[17.16] as 3; because we can get only one beacon per
- * superframe, that'd be 3 * 65ms = 195 ~ 200 ms. Let's give it time
- * for jitter and stuff and make it 500 ms.
- */
-unsigned long beacon_timeout_ms = 500;
-
-static
-ssize_t beacon_timeout_ms_show(struct class *class,
- struct class_attribute *attr,
- char *buf)
-{
- return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms);
-}
-
-static
-ssize_t beacon_timeout_ms_store(struct class *class,
- struct class_attribute *attr,
- const char *buf, size_t size)
-{
- unsigned long bt;
- ssize_t result;
- result = sscanf(buf, "%lu", &bt);
- if (result != 1)
- return -EINVAL;
- beacon_timeout_ms = bt;
- return size;
-}
-static CLASS_ATTR_RW(beacon_timeout_ms);
-
-static struct attribute *uwb_class_attrs[] = {
- &class_attr_beacon_timeout_ms.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(uwb_class);
-
-/** Device model classes */
-struct class uwb_rc_class = {
- .name = "uwb_rc",
- .class_groups = uwb_class_groups,
-};
-
-
-static int __init uwb_subsys_init(void)
-{
- int result = 0;
-
- result = uwb_est_create();
- if (result < 0) {
- printk(KERN_ERR "uwb: Can't initialize EST subsystem\n");
- goto error_est_init;
- }
-
- result = class_register(&uwb_rc_class);
- if (result < 0)
- goto error_uwb_rc_class_register;
-
- /* Register the UWB bus */
- result = bus_register(&uwb_bus_type);
- if (result) {
- pr_err("%s - registering bus driver failed\n", __func__);
- goto exit_bus;
- }
-
- uwb_dbg_init();
- return 0;
-
-exit_bus:
- class_unregister(&uwb_rc_class);
-error_uwb_rc_class_register:
- uwb_est_destroy();
-error_est_init:
- return result;
-}
-module_init(uwb_subsys_init);
-
-static void __exit uwb_subsys_exit(void)
-{
- uwb_dbg_exit();
- bus_unregister(&uwb_bus_type);
- class_unregister(&uwb_rc_class);
- uwb_est_destroy();
- return;
-}
-module_exit(uwb_subsys_exit);
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("Ultra Wide Band core");
-MODULE_LICENSE("GPL");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * DRP availability management
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Reinette Chatre <reinette.chatre@intel.com>
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- *
- * Manage DRP Availability (the MAS available for DRP
- * reservations). Thus:
- *
- * - Handle DRP Availability Change notifications
- *
- * - Allow the reservation manager to indicate MAS reserved/released
- * by local (owned by/targeted at the radio controller)
- * reservations.
- *
- * - Based on the two sources above, generate a DRP Availability IE to
- * be included in the beacon.
- *
- * See also the documentation for struct uwb_drp_avail.
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/bitmap.h>
-#include "uwb-internal.h"
-
-/**
- * uwb_drp_avail_init - initialize an RC's MAS availability
- *
- * All MAS are available initially. The RC will inform use which
- * slots are used for the BP (it may change in size).
- */
-void uwb_drp_avail_init(struct uwb_rc *rc)
-{
- bitmap_fill(rc->drp_avail.global, UWB_NUM_MAS);
- bitmap_fill(rc->drp_avail.local, UWB_NUM_MAS);
- bitmap_fill(rc->drp_avail.pending, UWB_NUM_MAS);
-}
-
-/*
- * Determine MAS available for new local reservations.
- *
- * avail = global & local & pending
- */
-void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail)
-{
- bitmap_and(avail->bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS);
- bitmap_and(avail->bm, avail->bm, rc->drp_avail.pending, UWB_NUM_MAS);
-}
-
-/**
- * uwb_drp_avail_reserve_pending - reserve MAS for a new reservation
- * @rc: the radio controller
- * @mas: the MAS to reserve
- *
- * Returns 0 on success, or -EBUSY if the MAS requested aren't available.
- */
-int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas)
-{
- struct uwb_mas_bm avail;
-
- uwb_drp_available(rc, &avail);
- if (!bitmap_subset(mas->bm, avail.bm, UWB_NUM_MAS))
- return -EBUSY;
-
- bitmap_andnot(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
- return 0;
-}
-
-/**
- * uwb_drp_avail_reserve - reserve MAS for an established reservation
- * @rc: the radio controller
- * @mas: the MAS to reserve
- */
-void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas)
-{
- bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
- bitmap_andnot(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS);
- rc->drp_avail.ie_valid = false;
-}
-
-/**
- * uwb_drp_avail_release - release MAS from a pending or established reservation
- * @rc: the radio controller
- * @mas: the MAS to release
- */
-void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas)
-{
- bitmap_or(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS);
- bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS);
- rc->drp_avail.ie_valid = false;
- uwb_rsv_handle_drp_avail_change(rc);
-}
-
-/**
- * uwb_drp_avail_ie_update - update the DRP Availability IE
- * @rc: the radio controller
- *
- * avail = global & local
- */
-void uwb_drp_avail_ie_update(struct uwb_rc *rc)
-{
- struct uwb_mas_bm avail;
-
- bitmap_and(avail.bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS);
-
- rc->drp_avail.ie.hdr.element_id = UWB_IE_DRP_AVAILABILITY;
- rc->drp_avail.ie.hdr.length = UWB_NUM_MAS / 8;
- uwb_mas_bm_copy_le(rc->drp_avail.ie.bmp, &avail);
- rc->drp_avail.ie_valid = true;
-}
-
-/**
- * Create an unsigned long from a buffer containing a byte stream.
- *
- * @array: pointer to buffer
- * @itr: index of buffer from where we start
- * @len: the buffer's remaining size may not be exact multiple of
- * sizeof(unsigned long), @len is the length of buffer that needs
- * to be converted. This will be sizeof(unsigned long) or smaller
- * (BUG if not). If it is smaller then we will pad the remaining
- * space of the result with zeroes.
- */
-static
-unsigned long get_val(u8 *array, size_t itr, size_t len)
-{
- unsigned long val = 0;
- size_t top = itr + len;
-
- BUG_ON(len > sizeof(val));
-
- while (itr < top) {
- val <<= 8;
- val |= array[top - 1];
- top--;
- }
- val <<= 8 * (sizeof(val) - len); /* padding */
- return val;
-}
-
-/**
- * Initialize bitmap from data buffer.
- *
- * The bitmap to be converted could come from a IE, for example a
- * DRP Availability IE.
- * From ECMA-368 1.0 [16.8.7]: "
- * octets: 1 1 N * (0 to 32)
- * Element ID Length (=N) DRP Availability Bitmap
- *
- * The DRP Availability Bitmap field is up to 256 bits long, one
- * bit for each MAS in the superframe, where the least-significant
- * bit of the field corresponds to the first MAS in the superframe
- * and successive bits correspond to successive MASs."
- *
- * The DRP Availability bitmap is in octets from 0 to 32, so octet
- * 32 contains bits for MAS 1-8, etc. If the bitmap is smaller than 32
- * octets, the bits in octets not included at the end of the bitmap are
- * treated as zero. In this case (when the bitmap is smaller than 32
- * octets) the MAS represented range from MAS 1 to MAS (size of bitmap)
- * with the last octet still containing bits for MAS 1-8, etc.
- *
- * For example:
- * F00F0102 03040506 0708090A 0B0C0D0E 0F010203
- * ^^^^
- * ||||
- * ||||
- * |||\LSB of byte is MAS 9
- * ||\MSB of byte is MAS 16
- * |\LSB of first byte is MAS 1
- * \ MSB of byte is MAS 8
- *
- * An example of this encoding can be found in ECMA-368 Annex-D [Table D.11]
- *
- * The resulting bitmap will have the following mapping:
- * bit position 0 == MAS 1
- * bit position 1 == MAS 2
- * ...
- * bit position (UWB_NUM_MAS - 1) == MAS UWB_NUM_MAS
- *
- * @bmp_itr: pointer to bitmap (can be declared with DECLARE_BITMAP)
- * @buffer: pointer to buffer containing bitmap data in big endian
- * format (MSB first)
- * @buffer_size:number of bytes with which bitmap should be initialized
- */
-static
-void buffer_to_bmp(unsigned long *bmp_itr, void *_buffer,
- size_t buffer_size)
-{
- u8 *buffer = _buffer;
- size_t itr, len;
- unsigned long val;
-
- itr = 0;
- while (itr < buffer_size) {
- len = buffer_size - itr >= sizeof(val) ?
- sizeof(val) : buffer_size - itr;
- val = get_val(buffer, itr, len);
- bmp_itr[itr / sizeof(val)] = val;
- itr += sizeof(val);
- }
-}
-
-
-/**
- * Extract DRP Availability bitmap from the notification.
- *
- * The notification that comes in contains a bitmap of (UWB_NUM_MAS / 8) bytes
- * We convert that to our internal representation.
- */
-static
-int uwbd_evt_get_drp_avail(struct uwb_event *evt, unsigned long *bmp)
-{
- struct device *dev = &evt->rc->uwb_dev.dev;
- struct uwb_rc_evt_drp_avail *drp_evt;
- int result = -EINVAL;
-
- /* Is there enough data to decode the event? */
- if (evt->notif.size < sizeof(*drp_evt)) {
- dev_err(dev, "DRP Availability Change: Not enough "
- "data to decode event [%zu bytes, %zu "
- "needed]\n", evt->notif.size, sizeof(*drp_evt));
- goto error;
- }
- drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp_avail, rceb);
- buffer_to_bmp(bmp, drp_evt->bmp, UWB_NUM_MAS/8);
- result = 0;
-error:
- return result;
-}
-
-
-/**
- * Process an incoming DRP Availability notification.
- *
- * @evt: Event information (packs the actual event data, which
- * radio controller it came to, etc).
- *
- * @returns: 0 on success (so uwbd() frees the event buffer), < 0
- * on error.
- *
- * According to ECMA-368 1.0 [16.8.7], bits set to ONE indicate that
- * the MAS slot is available, bits set to ZERO indicate that the slot
- * is busy.
- *
- * So we clear available slots, we set used slots :)
- *
- * The notification only marks non-availability based on the BP and
- * received DRP IEs that are not for this radio controller. A copy of
- * this bitmap is needed to generate the real availability (which
- * includes local and pending reservations).
- *
- * The DRP Availability IE that this radio controller emits will need
- * to be updated.
- */
-int uwbd_evt_handle_rc_drp_avail(struct uwb_event *evt)
-{
- int result;
- struct uwb_rc *rc = evt->rc;
- DECLARE_BITMAP(bmp, UWB_NUM_MAS);
-
- result = uwbd_evt_get_drp_avail(evt, bmp);
- if (result < 0)
- return result;
-
- mutex_lock(&rc->rsvs_mutex);
- bitmap_copy(rc->drp_avail.global, bmp, UWB_NUM_MAS);
- rc->drp_avail.ie_valid = false;
- uwb_rsv_handle_drp_avail_change(rc);
- mutex_unlock(&rc->rsvs_mutex);
-
- uwb_rsv_sched_update(rc);
-
- return 0;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * UWB DRP IE management.
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/random.h>
-#include <linux/slab.h>
-
-#include "uwb.h"
-#include "uwb-internal.h"
-
-
-/*
- * Return the reason code for a reservations's DRP IE.
- */
-static int uwb_rsv_reason_code(struct uwb_rsv *rsv)
-{
- static const int reason_codes[] = {
- [UWB_RSV_STATE_O_INITIATED] = UWB_DRP_REASON_ACCEPTED,
- [UWB_RSV_STATE_O_PENDING] = UWB_DRP_REASON_ACCEPTED,
- [UWB_RSV_STATE_O_MODIFIED] = UWB_DRP_REASON_MODIFIED,
- [UWB_RSV_STATE_O_ESTABLISHED] = UWB_DRP_REASON_ACCEPTED,
- [UWB_RSV_STATE_O_TO_BE_MOVED] = UWB_DRP_REASON_ACCEPTED,
- [UWB_RSV_STATE_O_MOVE_COMBINING] = UWB_DRP_REASON_MODIFIED,
- [UWB_RSV_STATE_O_MOVE_REDUCING] = UWB_DRP_REASON_MODIFIED,
- [UWB_RSV_STATE_O_MOVE_EXPANDING] = UWB_DRP_REASON_ACCEPTED,
- [UWB_RSV_STATE_T_ACCEPTED] = UWB_DRP_REASON_ACCEPTED,
- [UWB_RSV_STATE_T_CONFLICT] = UWB_DRP_REASON_CONFLICT,
- [UWB_RSV_STATE_T_PENDING] = UWB_DRP_REASON_PENDING,
- [UWB_RSV_STATE_T_DENIED] = UWB_DRP_REASON_DENIED,
- [UWB_RSV_STATE_T_RESIZED] = UWB_DRP_REASON_ACCEPTED,
- [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = UWB_DRP_REASON_ACCEPTED,
- [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = UWB_DRP_REASON_CONFLICT,
- [UWB_RSV_STATE_T_EXPANDING_PENDING] = UWB_DRP_REASON_PENDING,
- [UWB_RSV_STATE_T_EXPANDING_DENIED] = UWB_DRP_REASON_DENIED,
- };
-
- return reason_codes[rsv->state];
-}
-
-/*
- * Return the reason code for a reservations's companion DRP IE .
- */
-static int uwb_rsv_companion_reason_code(struct uwb_rsv *rsv)
-{
- static const int companion_reason_codes[] = {
- [UWB_RSV_STATE_O_MOVE_EXPANDING] = UWB_DRP_REASON_ACCEPTED,
- [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = UWB_DRP_REASON_ACCEPTED,
- [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = UWB_DRP_REASON_CONFLICT,
- [UWB_RSV_STATE_T_EXPANDING_PENDING] = UWB_DRP_REASON_PENDING,
- [UWB_RSV_STATE_T_EXPANDING_DENIED] = UWB_DRP_REASON_DENIED,
- };
-
- return companion_reason_codes[rsv->state];
-}
-
-/*
- * Return the status bit for a reservations's DRP IE.
- */
-int uwb_rsv_status(struct uwb_rsv *rsv)
-{
- static const int statuses[] = {
- [UWB_RSV_STATE_O_INITIATED] = 0,
- [UWB_RSV_STATE_O_PENDING] = 0,
- [UWB_RSV_STATE_O_MODIFIED] = 1,
- [UWB_RSV_STATE_O_ESTABLISHED] = 1,
- [UWB_RSV_STATE_O_TO_BE_MOVED] = 0,
- [UWB_RSV_STATE_O_MOVE_COMBINING] = 1,
- [UWB_RSV_STATE_O_MOVE_REDUCING] = 1,
- [UWB_RSV_STATE_O_MOVE_EXPANDING] = 1,
- [UWB_RSV_STATE_T_ACCEPTED] = 1,
- [UWB_RSV_STATE_T_CONFLICT] = 0,
- [UWB_RSV_STATE_T_PENDING] = 0,
- [UWB_RSV_STATE_T_DENIED] = 0,
- [UWB_RSV_STATE_T_RESIZED] = 1,
- [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = 1,
- [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = 1,
- [UWB_RSV_STATE_T_EXPANDING_PENDING] = 1,
- [UWB_RSV_STATE_T_EXPANDING_DENIED] = 1,
-
- };
-
- return statuses[rsv->state];
-}
-
-/*
- * Return the status bit for a reservations's companion DRP IE .
- */
-int uwb_rsv_companion_status(struct uwb_rsv *rsv)
-{
- static const int companion_statuses[] = {
- [UWB_RSV_STATE_O_MOVE_EXPANDING] = 0,
- [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = 1,
- [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = 0,
- [UWB_RSV_STATE_T_EXPANDING_PENDING] = 0,
- [UWB_RSV_STATE_T_EXPANDING_DENIED] = 0,
- };
-
- return companion_statuses[rsv->state];
-}
-
-/*
- * Allocate a DRP IE.
- *
- * To save having to free/allocate a DRP IE when its MAS changes,
- * enough memory is allocated for the maxiumum number of DRP
- * allocation fields. This gives an overhead per reservation of up to
- * (UWB_NUM_ZONES - 1) * 4 = 60 octets.
- */
-static struct uwb_ie_drp *uwb_drp_ie_alloc(void)
-{
- struct uwb_ie_drp *drp_ie;
-
- drp_ie = kzalloc(struct_size(drp_ie, allocs, UWB_NUM_ZONES),
- GFP_KERNEL);
- if (drp_ie)
- drp_ie->hdr.element_id = UWB_IE_DRP;
- return drp_ie;
-}
-
-
-/*
- * Fill a DRP IE's allocation fields from a MAS bitmap.
- */
-static void uwb_drp_ie_from_bm(struct uwb_ie_drp *drp_ie,
- struct uwb_mas_bm *mas)
-{
- int z, i, num_fields = 0, next = 0;
- struct uwb_drp_alloc *zones;
- __le16 current_bmp;
- DECLARE_BITMAP(tmp_bmp, UWB_NUM_MAS);
- DECLARE_BITMAP(tmp_mas_bm, UWB_MAS_PER_ZONE);
-
- zones = drp_ie->allocs;
-
- bitmap_copy(tmp_bmp, mas->bm, UWB_NUM_MAS);
-
- /* Determine unique MAS bitmaps in zones from bitmap. */
- for (z = 0; z < UWB_NUM_ZONES; z++) {
- bitmap_copy(tmp_mas_bm, tmp_bmp, UWB_MAS_PER_ZONE);
- if (bitmap_weight(tmp_mas_bm, UWB_MAS_PER_ZONE) > 0) {
- bool found = false;
- current_bmp = (__le16) *tmp_mas_bm;
- for (i = 0; i < next; i++) {
- if (current_bmp == zones[i].mas_bm) {
- zones[i].zone_bm |= 1 << z;
- found = true;
- break;
- }
- }
- if (!found) {
- num_fields++;
- zones[next].zone_bm = 1 << z;
- zones[next].mas_bm = current_bmp;
- next++;
- }
- }
- bitmap_shift_right(tmp_bmp, tmp_bmp, UWB_MAS_PER_ZONE, UWB_NUM_MAS);
- }
-
- /* Store in format ready for transmission (le16). */
- for (i = 0; i < num_fields; i++) {
- drp_ie->allocs[i].zone_bm = cpu_to_le16(zones[i].zone_bm);
- drp_ie->allocs[i].mas_bm = cpu_to_le16(zones[i].mas_bm);
- }
-
- drp_ie->hdr.length = sizeof(struct uwb_ie_drp) - sizeof(struct uwb_ie_hdr)
- + num_fields * sizeof(struct uwb_drp_alloc);
-}
-
-/**
- * uwb_drp_ie_update - update a reservation's DRP IE
- * @rsv: the reservation
- */
-int uwb_drp_ie_update(struct uwb_rsv *rsv)
-{
- struct uwb_ie_drp *drp_ie;
- struct uwb_rsv_move *mv;
- int unsafe;
-
- if (rsv->state == UWB_RSV_STATE_NONE) {
- kfree(rsv->drp_ie);
- rsv->drp_ie = NULL;
- return 0;
- }
-
- unsafe = rsv->mas.unsafe ? 1 : 0;
-
- if (rsv->drp_ie == NULL) {
- rsv->drp_ie = uwb_drp_ie_alloc();
- if (rsv->drp_ie == NULL)
- return -ENOMEM;
- }
- drp_ie = rsv->drp_ie;
-
- uwb_ie_drp_set_unsafe(drp_ie, unsafe);
- uwb_ie_drp_set_tiebreaker(drp_ie, rsv->tiebreaker);
- uwb_ie_drp_set_owner(drp_ie, uwb_rsv_is_owner(rsv));
- uwb_ie_drp_set_status(drp_ie, uwb_rsv_status(rsv));
- uwb_ie_drp_set_reason_code(drp_ie, uwb_rsv_reason_code(rsv));
- uwb_ie_drp_set_stream_index(drp_ie, rsv->stream);
- uwb_ie_drp_set_type(drp_ie, rsv->type);
-
- if (uwb_rsv_is_owner(rsv)) {
- switch (rsv->target.type) {
- case UWB_RSV_TARGET_DEV:
- drp_ie->dev_addr = rsv->target.dev->dev_addr;
- break;
- case UWB_RSV_TARGET_DEVADDR:
- drp_ie->dev_addr = rsv->target.devaddr;
- break;
- }
- } else
- drp_ie->dev_addr = rsv->owner->dev_addr;
-
- uwb_drp_ie_from_bm(drp_ie, &rsv->mas);
-
- if (uwb_rsv_has_two_drp_ies(rsv)) {
- mv = &rsv->mv;
- if (mv->companion_drp_ie == NULL) {
- mv->companion_drp_ie = uwb_drp_ie_alloc();
- if (mv->companion_drp_ie == NULL)
- return -ENOMEM;
- }
- drp_ie = mv->companion_drp_ie;
-
- /* keep all the same configuration of the main drp_ie */
- memcpy(drp_ie, rsv->drp_ie, sizeof(struct uwb_ie_drp));
-
-
- /* FIXME: handle properly the unsafe bit */
- uwb_ie_drp_set_unsafe(drp_ie, 1);
- uwb_ie_drp_set_status(drp_ie, uwb_rsv_companion_status(rsv));
- uwb_ie_drp_set_reason_code(drp_ie, uwb_rsv_companion_reason_code(rsv));
-
- uwb_drp_ie_from_bm(drp_ie, &mv->companion_mas);
- }
-
- rsv->ie_valid = true;
- return 0;
-}
-
-/*
- * Set MAS bits from given MAS bitmap in a single zone of large bitmap.
- *
- * We are given a zone id and the MAS bitmap of bits that need to be set in
- * this zone. Note that this zone may already have bits set and this only
- * adds settings - we cannot simply assign the MAS bitmap contents to the
- * zone contents. We iterate over the the bits (MAS) in the zone and set the
- * bits that are set in the given MAS bitmap.
- */
-static
-void uwb_drp_ie_single_zone_to_bm(struct uwb_mas_bm *bm, u8 zone, u16 mas_bm)
-{
- int mas;
- u16 mas_mask;
-
- for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++) {
- mas_mask = 1 << mas;
- if (mas_bm & mas_mask)
- set_bit(zone * UWB_NUM_ZONES + mas, bm->bm);
- }
-}
-
-/**
- * uwb_drp_ie_zones_to_bm - convert DRP allocation fields to a bitmap
- * @mas: MAS bitmap that will be populated to correspond to the
- * allocation fields in the DRP IE
- * @drp_ie: the DRP IE that contains the allocation fields.
- *
- * The input format is an array of MAS allocation fields (16 bit Zone
- * bitmap, 16 bit MAS bitmap) as described in [ECMA-368] section
- * 16.8.6. The output is a full 256 bit MAS bitmap.
- *
- * We go over all the allocation fields, for each allocation field we
- * know which zones are impacted. We iterate over all the zones
- * impacted and call a function that will set the correct MAS bits in
- * each zone.
- */
-void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie)
-{
- int numallocs = (drp_ie->hdr.length - 4) / 4;
- const struct uwb_drp_alloc *alloc;
- int cnt;
- u16 zone_bm, mas_bm;
- u8 zone;
- u16 zone_mask;
-
- bitmap_zero(bm->bm, UWB_NUM_MAS);
-
- for (cnt = 0; cnt < numallocs; cnt++) {
- alloc = &drp_ie->allocs[cnt];
- zone_bm = le16_to_cpu(alloc->zone_bm);
- mas_bm = le16_to_cpu(alloc->mas_bm);
- for (zone = 0; zone < UWB_NUM_ZONES; zone++) {
- zone_mask = 1 << zone;
- if (zone_bm & zone_mask)
- uwb_drp_ie_single_zone_to_bm(bm, zone, mas_bm);
- }
- }
-}
-
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * Dynamic Reservation Protocol handling
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include "uwb-internal.h"
-
-
-/* DRP Conflict Actions ([ECMA-368 2nd Edition] 17.4.6) */
-enum uwb_drp_conflict_action {
- /* Reservation is maintained, no action needed */
- UWB_DRP_CONFLICT_MANTAIN = 0,
-
- /* the device shall not transmit frames in conflicting MASs in
- * the following superframe. If the device is the reservation
- * target, it shall also set the Reason Code in its DRP IE to
- * Conflict in its beacon in the following superframe.
- */
- UWB_DRP_CONFLICT_ACT1,
-
- /* the device shall not set the Reservation Status bit to ONE
- * and shall not transmit frames in conflicting MASs. If the
- * device is the reservation target, it shall also set the
- * Reason Code in its DRP IE to Conflict.
- */
- UWB_DRP_CONFLICT_ACT2,
-
- /* the device shall not transmit frames in conflicting MASs in
- * the following superframe. It shall remove the conflicting
- * MASs from the reservation or set the Reservation Status to
- * ZERO in its beacon in the following superframe. If the
- * device is the reservation target, it shall also set the
- * Reason Code in its DRP IE to Conflict.
- */
- UWB_DRP_CONFLICT_ACT3,
-};
-
-
-static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg,
- struct uwb_rceb *reply, ssize_t reply_size)
-{
- struct uwb_rc_evt_set_drp_ie *r = (struct uwb_rc_evt_set_drp_ie *)reply;
- unsigned long flags;
-
- if (r != NULL) {
- if (r->bResultCode != UWB_RC_RES_SUCCESS)
- dev_err(&rc->uwb_dev.dev, "SET-DRP-IE failed: %s (%d)\n",
- uwb_rc_strerror(r->bResultCode), r->bResultCode);
- } else
- dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n");
-
- spin_lock_irqsave(&rc->rsvs_lock, flags);
- if (rc->set_drp_ie_pending > 1) {
- rc->set_drp_ie_pending = 0;
- uwb_rsv_queue_update(rc);
- } else {
- rc->set_drp_ie_pending = 0;
- }
- spin_unlock_irqrestore(&rc->rsvs_lock, flags);
-}
-
-/**
- * Construct and send the SET DRP IE
- *
- * @rc: UWB Host controller
- * @returns: >= 0 number of bytes still available in the beacon
- * < 0 errno code on error.
- *
- * See WUSB[8.6.2.7]: The host must set all the DRP IEs that it wants the
- * device to include in its beacon at the same time. We thus have to
- * traverse all reservations and include the DRP IEs of all PENDING
- * and NEGOTIATED reservations in a SET DRP command for transmission.
- *
- * A DRP Availability IE is appended.
- *
- * rc->rsvs_mutex is held
- *
- * FIXME We currently ignore the returned value indicating the remaining space
- * in beacon. This could be used to deny reservation requests earlier if
- * determined that they would cause the beacon space to be exceeded.
- */
-int uwb_rc_send_all_drp_ie(struct uwb_rc *rc)
-{
- int result;
- struct uwb_rc_cmd_set_drp_ie *cmd;
- struct uwb_rsv *rsv;
- struct uwb_rsv_move *mv;
- int num_bytes = 0;
- u8 *IEDataptr;
-
- result = -ENOMEM;
- /* First traverse all reservations to determine memory needed. */
- list_for_each_entry(rsv, &rc->reservations, rc_node) {
- if (rsv->drp_ie != NULL) {
- num_bytes += rsv->drp_ie->hdr.length + 2;
- if (uwb_rsv_has_two_drp_ies(rsv) &&
- (rsv->mv.companion_drp_ie != NULL)) {
- mv = &rsv->mv;
- num_bytes +=
- mv->companion_drp_ie->hdr.length + 2;
- }
- }
- }
- num_bytes += sizeof(rc->drp_avail.ie);
- cmd = kzalloc(sizeof(*cmd) + num_bytes, GFP_KERNEL);
- if (cmd == NULL)
- goto error;
- cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
- cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_DRP_IE);
- cmd->wIELength = num_bytes;
- IEDataptr = (u8 *)&cmd->IEData[0];
-
- /* FIXME: DRV avail IE is not always needed */
- /* put DRP avail IE first */
- memcpy(IEDataptr, &rc->drp_avail.ie, sizeof(rc->drp_avail.ie));
- IEDataptr += sizeof(struct uwb_ie_drp_avail);
-
- /* Next traverse all reservations to place IEs in allocated memory. */
- list_for_each_entry(rsv, &rc->reservations, rc_node) {
- if (rsv->drp_ie != NULL) {
- memcpy(IEDataptr, rsv->drp_ie,
- rsv->drp_ie->hdr.length + 2);
- IEDataptr += rsv->drp_ie->hdr.length + 2;
-
- if (uwb_rsv_has_two_drp_ies(rsv) &&
- (rsv->mv.companion_drp_ie != NULL)) {
- mv = &rsv->mv;
- memcpy(IEDataptr, mv->companion_drp_ie,
- mv->companion_drp_ie->hdr.length + 2);
- IEDataptr +=
- mv->companion_drp_ie->hdr.length + 2;
- }
- }
- }
-
- result = uwb_rc_cmd_async(rc, "SET-DRP-IE",
- &cmd->rccb, sizeof(*cmd) + num_bytes,
- UWB_RC_CET_GENERAL, UWB_RC_CMD_SET_DRP_IE,
- uwb_rc_set_drp_cmd_done, NULL);
-
- rc->set_drp_ie_pending = 1;
-
- kfree(cmd);
-error:
- return result;
-}
-
-/*
- * Evaluate the action to perform using conflict resolution rules
- *
- * Return a uwb_drp_conflict_action.
- */
-static int evaluate_conflict_action(struct uwb_ie_drp *ext_drp_ie, int ext_beacon_slot,
- struct uwb_rsv *rsv, int our_status)
-{
- int our_tie_breaker = rsv->tiebreaker;
- int our_type = rsv->type;
- int our_beacon_slot = rsv->rc->uwb_dev.beacon_slot;
-
- int ext_tie_breaker = uwb_ie_drp_tiebreaker(ext_drp_ie);
- int ext_status = uwb_ie_drp_status(ext_drp_ie);
- int ext_type = uwb_ie_drp_type(ext_drp_ie);
-
-
- /* [ECMA-368 2nd Edition] 17.4.6 */
- if (ext_type == UWB_DRP_TYPE_PCA && our_type == UWB_DRP_TYPE_PCA) {
- return UWB_DRP_CONFLICT_MANTAIN;
- }
-
- /* [ECMA-368 2nd Edition] 17.4.6-1 */
- if (our_type == UWB_DRP_TYPE_ALIEN_BP) {
- return UWB_DRP_CONFLICT_MANTAIN;
- }
-
- /* [ECMA-368 2nd Edition] 17.4.6-2 */
- if (ext_type == UWB_DRP_TYPE_ALIEN_BP) {
- /* here we know our_type != UWB_DRP_TYPE_ALIEN_BP */
- return UWB_DRP_CONFLICT_ACT1;
- }
-
- /* [ECMA-368 2nd Edition] 17.4.6-3 */
- if (our_status == 0 && ext_status == 1) {
- return UWB_DRP_CONFLICT_ACT2;
- }
-
- /* [ECMA-368 2nd Edition] 17.4.6-4 */
- if (our_status == 1 && ext_status == 0) {
- return UWB_DRP_CONFLICT_MANTAIN;
- }
-
- /* [ECMA-368 2nd Edition] 17.4.6-5a */
- if (our_tie_breaker == ext_tie_breaker &&
- our_beacon_slot < ext_beacon_slot) {
- return UWB_DRP_CONFLICT_MANTAIN;
- }
-
- /* [ECMA-368 2nd Edition] 17.4.6-5b */
- if (our_tie_breaker != ext_tie_breaker &&
- our_beacon_slot > ext_beacon_slot) {
- return UWB_DRP_CONFLICT_MANTAIN;
- }
-
- if (our_status == 0) {
- if (our_tie_breaker == ext_tie_breaker) {
- /* [ECMA-368 2nd Edition] 17.4.6-6a */
- if (our_beacon_slot > ext_beacon_slot) {
- return UWB_DRP_CONFLICT_ACT2;
- }
- } else {
- /* [ECMA-368 2nd Edition] 17.4.6-6b */
- if (our_beacon_slot < ext_beacon_slot) {
- return UWB_DRP_CONFLICT_ACT2;
- }
- }
- } else {
- if (our_tie_breaker == ext_tie_breaker) {
- /* [ECMA-368 2nd Edition] 17.4.6-7a */
- if (our_beacon_slot > ext_beacon_slot) {
- return UWB_DRP_CONFLICT_ACT3;
- }
- } else {
- /* [ECMA-368 2nd Edition] 17.4.6-7b */
- if (our_beacon_slot < ext_beacon_slot) {
- return UWB_DRP_CONFLICT_ACT3;
- }
- }
- }
- return UWB_DRP_CONFLICT_MANTAIN;
-}
-
-static void handle_conflict_normal(struct uwb_ie_drp *drp_ie,
- int ext_beacon_slot,
- struct uwb_rsv *rsv,
- struct uwb_mas_bm *conflicting_mas)
-{
- struct uwb_rc *rc = rsv->rc;
- struct uwb_rsv_move *mv = &rsv->mv;
- struct uwb_drp_backoff_win *bow = &rc->bow;
- int action;
-
- action = evaluate_conflict_action(drp_ie, ext_beacon_slot, rsv, uwb_rsv_status(rsv));
-
- if (uwb_rsv_is_owner(rsv)) {
- switch(action) {
- case UWB_DRP_CONFLICT_ACT2:
- /* try move */
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_TO_BE_MOVED);
- if (bow->can_reserve_extra_mases == false)
- uwb_rsv_backoff_win_increment(rc);
-
- break;
- case UWB_DRP_CONFLICT_ACT3:
- uwb_rsv_backoff_win_increment(rc);
- /* drop some mases with reason modified */
- /* put in the companion the mases to be dropped */
- bitmap_and(mv->companion_mas.bm, rsv->mas.bm, conflicting_mas->bm, UWB_NUM_MAS);
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED);
- default:
- break;
- }
- } else {
- switch(action) {
- case UWB_DRP_CONFLICT_ACT2:
- case UWB_DRP_CONFLICT_ACT3:
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT);
- default:
- break;
- }
-
- }
-
-}
-
-static void handle_conflict_expanding(struct uwb_ie_drp *drp_ie, int ext_beacon_slot,
- struct uwb_rsv *rsv, bool companion_only,
- struct uwb_mas_bm *conflicting_mas)
-{
- struct uwb_rc *rc = rsv->rc;
- struct uwb_drp_backoff_win *bow = &rc->bow;
- struct uwb_rsv_move *mv = &rsv->mv;
- int action;
-
- if (companion_only) {
- /* status of companion is 0 at this point */
- action = evaluate_conflict_action(drp_ie, ext_beacon_slot, rsv, 0);
- if (uwb_rsv_is_owner(rsv)) {
- switch(action) {
- case UWB_DRP_CONFLICT_ACT2:
- case UWB_DRP_CONFLICT_ACT3:
- uwb_rsv_set_state(rsv,
- UWB_RSV_STATE_O_ESTABLISHED);
- rsv->needs_release_companion_mas = false;
- if (bow->can_reserve_extra_mases == false)
- uwb_rsv_backoff_win_increment(rc);
- uwb_drp_avail_release(rsv->rc,
- &rsv->mv.companion_mas);
- }
- } else { /* rsv is target */
- switch(action) {
- case UWB_DRP_CONFLICT_ACT2:
- case UWB_DRP_CONFLICT_ACT3:
- uwb_rsv_set_state(rsv,
- UWB_RSV_STATE_T_EXPANDING_CONFLICT);
- /* send_drp_avail_ie = true; */
- }
- }
- } else { /* also base part of the reservation is conflicting */
- if (uwb_rsv_is_owner(rsv)) {
- uwb_rsv_backoff_win_increment(rc);
- /* remove companion part */
- uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas);
-
- /* drop some mases with reason modified */
-
- /* put in the companion the mases to be dropped */
- bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm,
- conflicting_mas->bm, UWB_NUM_MAS);
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED);
- } else { /* it is a target rsv */
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT);
- /* send_drp_avail_ie = true; */
- }
- }
-}
-
-static void uwb_drp_handle_conflict_rsv(struct uwb_rc *rc, struct uwb_rsv *rsv,
- struct uwb_rc_evt_drp *drp_evt,
- struct uwb_ie_drp *drp_ie,
- struct uwb_mas_bm *conflicting_mas)
-{
- struct uwb_rsv_move *mv;
-
- /* check if the conflicting reservation has two drp_ies */
- if (uwb_rsv_has_two_drp_ies(rsv)) {
- mv = &rsv->mv;
- if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm,
- UWB_NUM_MAS)) {
- handle_conflict_expanding(drp_ie,
- drp_evt->beacon_slot_number,
- rsv, false, conflicting_mas);
- } else {
- if (bitmap_intersects(mv->companion_mas.bm,
- conflicting_mas->bm, UWB_NUM_MAS)) {
- handle_conflict_expanding(
- drp_ie, drp_evt->beacon_slot_number,
- rsv, true, conflicting_mas);
- }
- }
- } else if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm,
- UWB_NUM_MAS)) {
- handle_conflict_normal(drp_ie, drp_evt->beacon_slot_number,
- rsv, conflicting_mas);
- }
-}
-
-static void uwb_drp_handle_all_conflict_rsv(struct uwb_rc *rc,
- struct uwb_rc_evt_drp *drp_evt,
- struct uwb_ie_drp *drp_ie,
- struct uwb_mas_bm *conflicting_mas)
-{
- struct uwb_rsv *rsv;
-
- list_for_each_entry(rsv, &rc->reservations, rc_node) {
- uwb_drp_handle_conflict_rsv(rc, rsv, drp_evt, drp_ie,
- conflicting_mas);
- }
-}
-
-static void uwb_drp_process_target_accepted(struct uwb_rc *rc,
- struct uwb_rsv *rsv, struct uwb_rc_evt_drp *drp_evt,
- struct uwb_ie_drp *drp_ie, struct uwb_mas_bm *mas)
-{
- struct uwb_rsv_move *mv = &rsv->mv;
- int status;
-
- status = uwb_ie_drp_status(drp_ie);
-
- if (rsv->state == UWB_RSV_STATE_T_CONFLICT) {
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT);
- return;
- }
-
- if (rsv->state == UWB_RSV_STATE_T_EXPANDING_ACCEPTED) {
- /* drp_ie is companion */
- if (!bitmap_equal(rsv->mas.bm, mas->bm, UWB_NUM_MAS)) {
- /* stroke companion */
- uwb_rsv_set_state(rsv,
- UWB_RSV_STATE_T_EXPANDING_ACCEPTED);
- }
- } else {
- if (!bitmap_equal(rsv->mas.bm, mas->bm, UWB_NUM_MAS)) {
- if (uwb_drp_avail_reserve_pending(rc, mas) == -EBUSY) {
- /* FIXME: there is a conflict, find
- * the conflicting reservations and
- * take a sensible action. Consider
- * that in drp_ie there is the
- * "neighbour" */
- uwb_drp_handle_all_conflict_rsv(rc, drp_evt,
- drp_ie, mas);
- } else {
- /* accept the extra reservation */
- bitmap_copy(mv->companion_mas.bm, mas->bm,
- UWB_NUM_MAS);
- uwb_rsv_set_state(rsv,
- UWB_RSV_STATE_T_EXPANDING_ACCEPTED);
- }
- } else {
- if (status) {
- uwb_rsv_set_state(rsv,
- UWB_RSV_STATE_T_ACCEPTED);
- }
- }
-
- }
-}
-
-/*
- * Based on the DRP IE, transition a target reservation to a new
- * state.
- */
-static void uwb_drp_process_target(struct uwb_rc *rc, struct uwb_rsv *rsv,
- struct uwb_ie_drp *drp_ie, struct uwb_rc_evt_drp *drp_evt)
-{
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_rsv_move *mv = &rsv->mv;
- int status;
- enum uwb_drp_reason reason_code;
- struct uwb_mas_bm mas;
-
- status = uwb_ie_drp_status(drp_ie);
- reason_code = uwb_ie_drp_reason_code(drp_ie);
- uwb_drp_ie_to_bm(&mas, drp_ie);
-
- switch (reason_code) {
- case UWB_DRP_REASON_ACCEPTED:
- uwb_drp_process_target_accepted(rc, rsv, drp_evt, drp_ie, &mas);
- break;
-
- case UWB_DRP_REASON_MODIFIED:
- /* check to see if we have already modified the reservation */
- if (bitmap_equal(rsv->mas.bm, mas.bm, UWB_NUM_MAS)) {
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED);
- break;
- }
-
- /* find if the owner wants to expand or reduce */
- if (bitmap_subset(mas.bm, rsv->mas.bm, UWB_NUM_MAS)) {
- /* owner is reducing */
- bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, mas.bm,
- UWB_NUM_MAS);
- uwb_drp_avail_release(rsv->rc, &mv->companion_mas);
- }
-
- bitmap_copy(rsv->mas.bm, mas.bm, UWB_NUM_MAS);
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_RESIZED);
- break;
- default:
- dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
- reason_code, status);
- }
-}
-
-static void uwb_drp_process_owner_accepted(struct uwb_rsv *rsv,
- struct uwb_mas_bm *mas)
-{
- struct uwb_rsv_move *mv = &rsv->mv;
-
- switch (rsv->state) {
- case UWB_RSV_STATE_O_PENDING:
- case UWB_RSV_STATE_O_INITIATED:
- case UWB_RSV_STATE_O_ESTABLISHED:
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
- break;
- case UWB_RSV_STATE_O_MODIFIED:
- if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS))
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
- else
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED);
- break;
-
- case UWB_RSV_STATE_O_MOVE_REDUCING: /* shouldn' t be a problem */
- if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS))
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
- else
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
- break;
- case UWB_RSV_STATE_O_MOVE_EXPANDING:
- if (bitmap_equal(mas->bm, mv->companion_mas.bm, UWB_NUM_MAS)) {
- /* Companion reservation accepted */
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
- } else {
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING);
- }
- break;
- case UWB_RSV_STATE_O_MOVE_COMBINING:
- if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS))
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
- else
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
- break;
- default:
- break;
- }
-}
-/*
- * Based on the DRP IE, transition an owner reservation to a new
- * state.
- */
-static void uwb_drp_process_owner(struct uwb_rc *rc, struct uwb_rsv *rsv,
- struct uwb_dev *src, struct uwb_ie_drp *drp_ie,
- struct uwb_rc_evt_drp *drp_evt)
-{
- struct device *dev = &rc->uwb_dev.dev;
- int status;
- enum uwb_drp_reason reason_code;
- struct uwb_mas_bm mas;
-
- status = uwb_ie_drp_status(drp_ie);
- reason_code = uwb_ie_drp_reason_code(drp_ie);
- uwb_drp_ie_to_bm(&mas, drp_ie);
-
- if (status) {
- switch (reason_code) {
- case UWB_DRP_REASON_ACCEPTED:
- uwb_drp_process_owner_accepted(rsv, &mas);
- break;
- default:
- dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
- reason_code, status);
- }
- } else {
- switch (reason_code) {
- case UWB_DRP_REASON_PENDING:
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_PENDING);
- break;
- case UWB_DRP_REASON_DENIED:
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
- break;
- case UWB_DRP_REASON_CONFLICT:
- /* resolve the conflict */
- bitmap_complement(mas.bm, src->last_availability_bm,
- UWB_NUM_MAS);
- uwb_drp_handle_conflict_rsv(rc, rsv, drp_evt, drp_ie, &mas);
- break;
- default:
- dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n",
- reason_code, status);
- }
- }
-}
-
-static void uwb_cnflt_alien_stroke_timer(struct uwb_cnflt_alien *cnflt)
-{
- unsigned timeout_us = UWB_MAX_LOST_BEACONS * UWB_SUPERFRAME_LENGTH_US;
- mod_timer(&cnflt->timer, jiffies + usecs_to_jiffies(timeout_us));
-}
-
-static void uwb_cnflt_update_work(struct work_struct *work)
-{
- struct uwb_cnflt_alien *cnflt = container_of(work,
- struct uwb_cnflt_alien,
- cnflt_update_work);
- struct uwb_cnflt_alien *c;
- struct uwb_rc *rc = cnflt->rc;
-
- unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE;
-
- mutex_lock(&rc->rsvs_mutex);
-
- list_del(&cnflt->rc_node);
-
- /* update rc global conflicting alien bitmap */
- bitmap_zero(rc->cnflt_alien_bitmap.bm, UWB_NUM_MAS);
-
- list_for_each_entry(c, &rc->cnflt_alien_list, rc_node) {
- bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm,
- c->mas.bm, UWB_NUM_MAS);
- }
-
- queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work,
- usecs_to_jiffies(delay_us));
-
- kfree(cnflt);
- mutex_unlock(&rc->rsvs_mutex);
-}
-
-static void uwb_cnflt_timer(struct timer_list *t)
-{
- struct uwb_cnflt_alien *cnflt = from_timer(cnflt, t, timer);
-
- queue_work(cnflt->rc->rsv_workq, &cnflt->cnflt_update_work);
-}
-
-/*
- * We have received an DRP_IE of type Alien BP and we need to make
- * sure we do not transmit in conflicting MASs.
- */
-static void uwb_drp_handle_alien_drp(struct uwb_rc *rc, struct uwb_ie_drp *drp_ie)
-{
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_mas_bm mas;
- struct uwb_cnflt_alien *cnflt;
- unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE;
-
- uwb_drp_ie_to_bm(&mas, drp_ie);
-
- list_for_each_entry(cnflt, &rc->cnflt_alien_list, rc_node) {
- if (bitmap_equal(cnflt->mas.bm, mas.bm, UWB_NUM_MAS)) {
- /* Existing alien BP reservation conflicting
- * bitmap, just reset the timer */
- uwb_cnflt_alien_stroke_timer(cnflt);
- return;
- }
- }
-
- /* New alien BP reservation conflicting bitmap */
-
- /* alloc and initialize new uwb_cnflt_alien */
- cnflt = kzalloc(sizeof(struct uwb_cnflt_alien), GFP_KERNEL);
- if (!cnflt) {
- dev_err(dev, "failed to alloc uwb_cnflt_alien struct\n");
- return;
- }
-
- INIT_LIST_HEAD(&cnflt->rc_node);
- timer_setup(&cnflt->timer, uwb_cnflt_timer, 0);
-
- cnflt->rc = rc;
- INIT_WORK(&cnflt->cnflt_update_work, uwb_cnflt_update_work);
-
- bitmap_copy(cnflt->mas.bm, mas.bm, UWB_NUM_MAS);
-
- list_add_tail(&cnflt->rc_node, &rc->cnflt_alien_list);
-
- /* update rc global conflicting alien bitmap */
- bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm, mas.bm, UWB_NUM_MAS);
-
- queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work, usecs_to_jiffies(delay_us));
-
- /* start the timer */
- uwb_cnflt_alien_stroke_timer(cnflt);
-}
-
-static void uwb_drp_process_not_involved(struct uwb_rc *rc,
- struct uwb_rc_evt_drp *drp_evt,
- struct uwb_ie_drp *drp_ie)
-{
- struct uwb_mas_bm mas;
-
- uwb_drp_ie_to_bm(&mas, drp_ie);
- uwb_drp_handle_all_conflict_rsv(rc, drp_evt, drp_ie, &mas);
-}
-
-static void uwb_drp_process_involved(struct uwb_rc *rc, struct uwb_dev *src,
- struct uwb_rc_evt_drp *drp_evt,
- struct uwb_ie_drp *drp_ie)
-{
- struct uwb_rsv *rsv;
-
- rsv = uwb_rsv_find(rc, src, drp_ie);
- if (!rsv) {
- /*
- * No reservation? It's either for a recently
- * terminated reservation; or the DRP IE couldn't be
- * processed (e.g., an invalid IE or out of memory).
- */
- return;
- }
-
- /*
- * Do nothing with DRP IEs for reservations that have been
- * terminated.
- */
- if (rsv->state == UWB_RSV_STATE_NONE) {
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
- return;
- }
-
- if (uwb_ie_drp_owner(drp_ie))
- uwb_drp_process_target(rc, rsv, drp_ie, drp_evt);
- else
- uwb_drp_process_owner(rc, rsv, src, drp_ie, drp_evt);
-
-}
-
-
-static bool uwb_drp_involves_us(struct uwb_rc *rc, struct uwb_ie_drp *drp_ie)
-{
- return uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, &drp_ie->dev_addr) == 0;
-}
-
-/*
- * Process a received DRP IE.
- */
-static void uwb_drp_process(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
- struct uwb_dev *src, struct uwb_ie_drp *drp_ie)
-{
- if (uwb_ie_drp_type(drp_ie) == UWB_DRP_TYPE_ALIEN_BP)
- uwb_drp_handle_alien_drp(rc, drp_ie);
- else if (uwb_drp_involves_us(rc, drp_ie))
- uwb_drp_process_involved(rc, src, drp_evt, drp_ie);
- else
- uwb_drp_process_not_involved(rc, drp_evt, drp_ie);
-}
-
-/*
- * Process a received DRP Availability IE
- */
-static void uwb_drp_availability_process(struct uwb_rc *rc, struct uwb_dev *src,
- struct uwb_ie_drp_avail *drp_availability_ie)
-{
- bitmap_copy(src->last_availability_bm,
- drp_availability_ie->bmp, UWB_NUM_MAS);
-}
-
-/*
- * Process all the DRP IEs (both DRP IEs and the DRP Availability IE)
- * from a device.
- */
-static
-void uwb_drp_process_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
- size_t ielen, struct uwb_dev *src_dev)
-{
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_ie_hdr *ie_hdr;
- void *ptr;
-
- ptr = drp_evt->ie_data;
- for (;;) {
- ie_hdr = uwb_ie_next(&ptr, &ielen);
- if (!ie_hdr)
- break;
-
- switch (ie_hdr->element_id) {
- case UWB_IE_DRP_AVAILABILITY:
- uwb_drp_availability_process(rc, src_dev, (struct uwb_ie_drp_avail *)ie_hdr);
- break;
- case UWB_IE_DRP:
- uwb_drp_process(rc, drp_evt, src_dev, (struct uwb_ie_drp *)ie_hdr);
- break;
- default:
- dev_warn(dev, "unexpected IE in DRP notification\n");
- break;
- }
- }
-
- if (ielen > 0)
- dev_warn(dev, "%d octets remaining in DRP notification\n",
- (int)ielen);
-}
-
-/**
- * uwbd_evt_handle_rc_drp - handle a DRP_IE event
- * @evt: the DRP_IE event from the radio controller
- *
- * This processes DRP notifications from the radio controller, either
- * initiating a new reservation or transitioning an existing
- * reservation into a different state.
- *
- * DRP notifications can occur for three different reasons:
- *
- * - UWB_DRP_NOTIF_DRP_IE_RECVD: one or more DRP IEs with the RC as
- * the target or source have been received.
- *
- * These DRP IEs could be new or for an existing reservation.
- *
- * If the DRP IE for an existing reservation ceases to be to
- * received for at least mMaxLostBeacons, the reservation should be
- * considered to be terminated. Note that the TERMINATE reason (see
- * below) may not always be signalled (e.g., the remote device has
- * two or more reservations established with the RC).
- *
- * - UWB_DRP_NOTIF_CONFLICT: DRP IEs from any device in the beacon
- * group conflict with the RC's reservations.
- *
- * - UWB_DRP_NOTIF_TERMINATE: DRP IEs are no longer being received
- * from a device (i.e., it's terminated all reservations).
- *
- * Only the software state of the reservations is changed; the setting
- * of the radio controller's DRP IEs is done after all the events in
- * an event buffer are processed. This saves waiting multiple times
- * for the SET_DRP_IE command to complete.
- */
-int uwbd_evt_handle_rc_drp(struct uwb_event *evt)
-{
- struct device *dev = &evt->rc->uwb_dev.dev;
- struct uwb_rc *rc = evt->rc;
- struct uwb_rc_evt_drp *drp_evt;
- size_t ielength, bytes_left;
- struct uwb_dev_addr src_addr;
- struct uwb_dev *src_dev;
-
- /* Is there enough data to decode the event (and any IEs in
- its payload)? */
- if (evt->notif.size < sizeof(*drp_evt)) {
- dev_err(dev, "DRP event: Not enough data to decode event "
- "[%zu bytes left, %zu needed]\n",
- evt->notif.size, sizeof(*drp_evt));
- return 0;
- }
- bytes_left = evt->notif.size - sizeof(*drp_evt);
- drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp, rceb);
- ielength = le16_to_cpu(drp_evt->ie_length);
- if (bytes_left != ielength) {
- dev_err(dev, "DRP event: Not enough data in payload [%zu"
- "bytes left, %zu declared in the event]\n",
- bytes_left, ielength);
- return 0;
- }
-
- memcpy(src_addr.data, &drp_evt->src_addr, sizeof(src_addr));
- src_dev = uwb_dev_get_by_devaddr(rc, &src_addr);
- if (!src_dev) {
- /*
- * A DRP notification from an unrecognized device.
- *
- * This is probably from a WUSB device that doesn't
- * have an EUI-48 and therefore doesn't show up in the
- * UWB device database. It's safe to simply ignore
- * these.
- */
- return 0;
- }
-
- mutex_lock(&rc->rsvs_mutex);
-
- /* We do not distinguish from the reason */
- uwb_drp_process_all(rc, drp_evt, ielength, src_dev);
-
- mutex_unlock(&rc->rsvs_mutex);
-
- uwb_dev_put(src_dev);
- return 0;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band Radio Control
- * Event Size Tables management
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- *
- * Infrastructure, code and data tables for guessing the size of
- * events received on the notification endpoints of UWB radio
- * controllers.
- *
- * You define a table of events and for each, its size and how to get
- * the extra size.
- *
- * ENTRY POINTS:
- *
- * uwb_est_{init/destroy}(): To initialize/release the EST subsystem.
- *
- * uwb_est_[u]register(): To un/register event size tables
- * uwb_est_grow()
- *
- * uwb_est_find_size(): Get the size of an event
- * uwb_est_get_size()
- */
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include "uwb-internal.h"
-
-struct uwb_est {
- u16 type_event_high;
- u16 vendor, product;
- u8 entries;
- const struct uwb_est_entry *entry;
-};
-
-static struct uwb_est *uwb_est;
-static u8 uwb_est_size;
-static u8 uwb_est_used;
-static DEFINE_RWLOCK(uwb_est_lock);
-
-/**
- * WUSB Standard Event Size Table, HWA-RC interface
- *
- * Sizes for events and notifications type 0 (general), high nibble 0.
- */
-static
-struct uwb_est_entry uwb_est_00_00xx[] = {
- [UWB_RC_EVT_IE_RCV] = {
- .size = sizeof(struct uwb_rc_evt_ie_rcv),
- .offset = 1 + offsetof(struct uwb_rc_evt_ie_rcv, wIELength),
- },
- [UWB_RC_EVT_BEACON] = {
- .size = sizeof(struct uwb_rc_evt_beacon),
- .offset = 1 + offsetof(struct uwb_rc_evt_beacon, wBeaconInfoLength),
- },
- [UWB_RC_EVT_BEACON_SIZE] = {
- .size = sizeof(struct uwb_rc_evt_beacon_size),
- },
- [UWB_RC_EVT_BPOIE_CHANGE] = {
- .size = sizeof(struct uwb_rc_evt_bpoie_change),
- .offset = 1 + offsetof(struct uwb_rc_evt_bpoie_change,
- wBPOIELength),
- },
- [UWB_RC_EVT_BP_SLOT_CHANGE] = {
- .size = sizeof(struct uwb_rc_evt_bp_slot_change),
- },
- [UWB_RC_EVT_BP_SWITCH_IE_RCV] = {
- .size = sizeof(struct uwb_rc_evt_bp_switch_ie_rcv),
- .offset = 1 + offsetof(struct uwb_rc_evt_bp_switch_ie_rcv, wIELength),
- },
- [UWB_RC_EVT_DEV_ADDR_CONFLICT] = {
- .size = sizeof(struct uwb_rc_evt_dev_addr_conflict),
- },
- [UWB_RC_EVT_DRP_AVAIL] = {
- .size = sizeof(struct uwb_rc_evt_drp_avail)
- },
- [UWB_RC_EVT_DRP] = {
- .size = sizeof(struct uwb_rc_evt_drp),
- .offset = 1 + offsetof(struct uwb_rc_evt_drp, ie_length),
- },
- [UWB_RC_EVT_BP_SWITCH_STATUS] = {
- .size = sizeof(struct uwb_rc_evt_bp_switch_status),
- },
- [UWB_RC_EVT_CMD_FRAME_RCV] = {
- .size = sizeof(struct uwb_rc_evt_cmd_frame_rcv),
- .offset = 1 + offsetof(struct uwb_rc_evt_cmd_frame_rcv, dataLength),
- },
- [UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV] = {
- .size = sizeof(struct uwb_rc_evt_channel_change_ie_rcv),
- .offset = 1 + offsetof(struct uwb_rc_evt_channel_change_ie_rcv, wIELength),
- },
- [UWB_RC_CMD_CHANNEL_CHANGE] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_DEV_ADDR_MGMT] = {
- .size = sizeof(struct uwb_rc_evt_dev_addr_mgmt) },
- [UWB_RC_CMD_GET_IE] = {
- .size = sizeof(struct uwb_rc_evt_get_ie),
- .offset = 1 + offsetof(struct uwb_rc_evt_get_ie, wIELength),
- },
- [UWB_RC_CMD_RESET] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_SCAN] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_SET_BEACON_FILTER] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_SET_DRP_IE] = {
- .size = sizeof(struct uwb_rc_evt_set_drp_ie),
- },
- [UWB_RC_CMD_SET_IE] = {
- .size = sizeof(struct uwb_rc_evt_set_ie),
- },
- [UWB_RC_CMD_SET_NOTIFICATION_FILTER] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_SET_TX_POWER] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_SLEEP] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_START_BEACON] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_STOP_BEACON] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_BP_MERGE] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_SEND_COMMAND_FRAME] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
- [UWB_RC_CMD_SET_ASIE_NOTIF] = {
- .size = sizeof(struct uwb_rc_evt_confirm),
- },
-};
-
-static
-struct uwb_est_entry uwb_est_01_00xx[] = {
- [UWB_RC_DAA_ENERGY_DETECTED] = {
- .size = sizeof(struct uwb_rc_evt_daa_energy_detected),
- },
- [UWB_RC_SET_DAA_ENERGY_MASK] = {
- .size = sizeof(struct uwb_rc_evt_set_daa_energy_mask),
- },
- [UWB_RC_SET_NOTIFICATION_FILTER_EX] = {
- .size = sizeof(struct uwb_rc_evt_set_notification_filter_ex),
- },
-};
-
-/**
- * Initialize the EST subsystem
- *
- * Register the standard tables also.
- *
- * FIXME: tag init
- */
-int uwb_est_create(void)
-{
- int result;
-
- uwb_est_size = 2;
- uwb_est_used = 0;
- uwb_est = kcalloc(uwb_est_size, sizeof(uwb_est[0]), GFP_KERNEL);
- if (uwb_est == NULL)
- return -ENOMEM;
-
- result = uwb_est_register(UWB_RC_CET_GENERAL, 0, 0xffff, 0xffff,
- uwb_est_00_00xx, ARRAY_SIZE(uwb_est_00_00xx));
- if (result < 0)
- goto out;
- result = uwb_est_register(UWB_RC_CET_EX_TYPE_1, 0, 0xffff, 0xffff,
- uwb_est_01_00xx, ARRAY_SIZE(uwb_est_01_00xx));
-out:
- return result;
-}
-
-
-/** Clean it up */
-void uwb_est_destroy(void)
-{
- kfree(uwb_est);
- uwb_est = NULL;
- uwb_est_size = uwb_est_used = 0;
-}
-
-
-/**
- * Double the capacity of the EST table
- *
- * @returns 0 if ok, < 0 errno no error.
- */
-static
-int uwb_est_grow(void)
-{
- size_t actual_size = uwb_est_size * sizeof(uwb_est[0]);
- void *new = kmalloc_array(2, actual_size, GFP_ATOMIC);
- if (new == NULL)
- return -ENOMEM;
- memcpy(new, uwb_est, actual_size);
- memset(new + actual_size, 0, actual_size);
- kfree(uwb_est);
- uwb_est = new;
- uwb_est_size *= 2;
- return 0;
-}
-
-
-/**
- * Register an event size table
- *
- * Makes room for it if the table is full, and then inserts it in the
- * right position (entries are sorted by type, event_high, vendor and
- * then product).
- *
- * @vendor: vendor code for matching against the device (0x0000 and
- * 0xffff mean any); use 0x0000 to force all to match without
- * checking possible vendor specific ones, 0xfffff to match
- * after checking vendor specific ones.
- *
- * @product: product code from that vendor; same matching rules, use
- * 0x0000 for not allowing vendor specific matches, 0xffff
- * for allowing.
- *
- * This arragement just makes the tables sort differenty. Because the
- * table is sorted by growing type-event_high-vendor-product, a zero
- * vendor will match before than a 0x456a vendor, that will match
- * before a 0xfffff vendor.
- *
- * @returns 0 if ok, < 0 errno on error (-ENOENT if not found).
- */
-/* FIXME: add bus type to vendor/product code */
-int uwb_est_register(u8 type, u8 event_high, u16 vendor, u16 product,
- const struct uwb_est_entry *entry, size_t entries)
-{
- unsigned long flags;
- unsigned itr;
- int result = 0;
-
- write_lock_irqsave(&uwb_est_lock, flags);
- if (uwb_est_used == uwb_est_size) {
- result = uwb_est_grow();
- if (result < 0)
- goto out;
- }
- /* Find the right spot to insert it in */
- for (itr = 0; itr < uwb_est_used; itr++)
- if (uwb_est[itr].type_event_high < type
- && uwb_est[itr].vendor < vendor
- && uwb_est[itr].product < product)
- break;
-
- /* Shift others to make room for the new one? */
- if (itr < uwb_est_used)
- memmove(&uwb_est[itr+1], &uwb_est[itr], uwb_est_used - itr);
- uwb_est[itr].type_event_high = type << 8 | event_high;
- uwb_est[itr].vendor = vendor;
- uwb_est[itr].product = product;
- uwb_est[itr].entry = entry;
- uwb_est[itr].entries = entries;
- uwb_est_used++;
-out:
- write_unlock_irqrestore(&uwb_est_lock, flags);
- return result;
-}
-EXPORT_SYMBOL_GPL(uwb_est_register);
-
-
-/**
- * Unregister an event size table
- *
- * This just removes the specified entry and moves the ones after it
- * to fill in the gap. This is needed to keep the list sorted; no
- * reallocation is done to reduce the size of the table.
- *
- * We unregister by all the data we used to register instead of by
- * pointer to the @entry array because we might have used the same
- * table for a bunch of IDs (for example).
- *
- * @returns 0 if ok, < 0 errno on error (-ENOENT if not found).
- */
-int uwb_est_unregister(u8 type, u8 event_high, u16 vendor, u16 product,
- const struct uwb_est_entry *entry, size_t entries)
-{
- unsigned long flags;
- unsigned itr;
- struct uwb_est est_cmp = {
- .type_event_high = type << 8 | event_high,
- .vendor = vendor,
- .product = product,
- .entry = entry,
- .entries = entries
- };
- write_lock_irqsave(&uwb_est_lock, flags);
- for (itr = 0; itr < uwb_est_used; itr++)
- if (!memcmp(&uwb_est[itr], &est_cmp, sizeof(est_cmp)))
- goto found;
- write_unlock_irqrestore(&uwb_est_lock, flags);
- return -ENOENT;
-
-found:
- if (itr < uwb_est_used - 1) /* Not last one? move ones above */
- memmove(&uwb_est[itr], &uwb_est[itr+1], uwb_est_used - itr - 1);
- uwb_est_used--;
- write_unlock_irqrestore(&uwb_est_lock, flags);
- return 0;
-}
-EXPORT_SYMBOL_GPL(uwb_est_unregister);
-
-
-/**
- * Get the size of an event from a table
- *
- * @rceb: pointer to the buffer with the event
- * @rceb_size: size of the area pointed to by @rceb in bytes.
- * @returns: > 0 Size of the event
- * -ENOSPC An area big enough was not provided to look
- * ahead into the event's guts and guess the size.
- * -EINVAL Unknown event code (wEvent).
- *
- * This will look at the received RCEB and guess what is the total
- * size. For variable sized events, it will look further ahead into
- * their length field to see how much data should be read.
- *
- * Note this size is *not* final--the neh (Notification/Event Handle)
- * might specificy an extra size to add.
- */
-static
-ssize_t uwb_est_get_size(struct uwb_rc *uwb_rc, struct uwb_est *est,
- u8 event_low, const struct uwb_rceb *rceb,
- size_t rceb_size)
-{
- unsigned offset;
- ssize_t size;
- struct device *dev = &uwb_rc->uwb_dev.dev;
- const struct uwb_est_entry *entry;
-
- size = -ENOENT;
- if (event_low >= est->entries) { /* in range? */
- dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u out of range\n",
- est, est->type_event_high, est->vendor, est->product,
- est->entries, event_low);
- goto out;
- }
- size = -ENOENT;
- entry = &est->entry[event_low];
- if (entry->size == 0 && entry->offset == 0) { /* unknown? */
- dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u unknown\n",
- est, est->type_event_high, est->vendor, est->product,
- est->entries, event_low);
- goto out;
- }
- offset = entry->offset; /* extra fries with that? */
- if (offset == 0)
- size = entry->size;
- else {
- /* Ops, got an extra size field at 'offset'--read it */
- const void *ptr = rceb;
- size_t type_size = 0;
- offset--;
- size = -ENOSPC; /* enough data for more? */
- switch (entry->type) {
- case UWB_EST_16: type_size = sizeof(__le16); break;
- case UWB_EST_8: type_size = sizeof(u8); break;
- default: BUG();
- }
- if (offset + type_size > rceb_size) {
- dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: "
- "not enough data to read extra size\n",
- est, est->type_event_high, est->vendor,
- est->product, est->entries);
- goto out;
- }
- size = entry->size;
- ptr += offset;
- switch (entry->type) {
- case UWB_EST_16: size += le16_to_cpu(*(__le16 *)ptr); break;
- case UWB_EST_8: size += *(u8 *)ptr; break;
- default: BUG();
- }
- }
-out:
- return size;
-}
-
-
-/**
- * Guesses the size of a WA event
- *
- * @rceb: pointer to the buffer with the event
- * @rceb_size: size of the area pointed to by @rceb in bytes.
- * @returns: > 0 Size of the event
- * -ENOSPC An area big enough was not provided to look
- * ahead into the event's guts and guess the size.
- * -EINVAL Unknown event code (wEvent).
- *
- * This will look at the received RCEB and guess what is the total
- * size by checking all the tables registered with
- * uwb_est_register(). For variable sized events, it will look further
- * ahead into their length field to see how much data should be read.
- *
- * Note this size is *not* final--the neh (Notification/Event Handle)
- * might specificy an extra size to add or replace.
- */
-ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
- size_t rceb_size)
-{
- /* FIXME: add vendor/product data */
- ssize_t size;
- struct device *dev = &rc->uwb_dev.dev;
- unsigned long flags;
- unsigned itr;
- u16 type_event_high, event;
-
- read_lock_irqsave(&uwb_est_lock, flags);
- size = -ENOSPC;
- if (rceb_size < sizeof(*rceb))
- goto out;
- event = le16_to_cpu(rceb->wEvent);
- type_event_high = rceb->bEventType << 8 | (event & 0xff00) >> 8;
- for (itr = 0; itr < uwb_est_used; itr++) {
- if (uwb_est[itr].type_event_high != type_event_high)
- continue;
- size = uwb_est_get_size(rc, &uwb_est[itr],
- event & 0x00ff, rceb, rceb_size);
- /* try more tables that might handle the same type */
- if (size != -ENOENT)
- goto out;
- }
- dev_dbg(dev,
- "event 0x%02x/%04x/%02x: no handlers available; RCEB %4ph\n",
- (unsigned) rceb->bEventType,
- (unsigned) le16_to_cpu(rceb->wEvent),
- (unsigned) rceb->bEventContext,
- rceb);
- size = -ENOENT;
-out:
- read_unlock_irqrestore(&uwb_est_lock, flags);
- return size;
-}
-EXPORT_SYMBOL_GPL(uwb_est_find_size);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * WUSB Host Wire Adapter: Radio Control Interface (WUSB[8.6])
- * Radio Control command/event transport
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * Initialize the Radio Control interface Driver.
- *
- * For each device probed, creates an 'struct hwarc' which contains
- * just the representation of the UWB Radio Controller, and the logic
- * for reading notifications and passing them to the UWB Core.
- *
- * So we initialize all of those, register the UWB Radio Controller
- * and setup the notification/event handle to pipe the notifications
- * to the UWB management Daemon.
- *
- * Command and event filtering.
- *
- * This is the driver for the Radio Control Interface described in WUSB
- * 1.0. The core UWB module assumes that all drivers are compliant to the
- * WHCI 0.95 specification. We thus create a filter that parses all
- * incoming messages from the (WUSB 1.0) device and manipulate them to
- * conform to the WHCI 0.95 specification. Similarly, outgoing messages
- * are parsed and manipulated to conform to the WUSB 1.0 compliant messages
- * that the device expects. Only a few messages are affected:
- * Affected events:
- * UWB_RC_EVT_BEACON
- * UWB_RC_EVT_BP_SLOT_CHANGE
- * UWB_RC_EVT_DRP_AVAIL
- * UWB_RC_EVT_DRP
- * Affected commands:
- * UWB_RC_CMD_SCAN
- * UWB_RC_CMD_SET_DRP_IE
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include "../wusbcore/include/wusb.h"
-#include "../wusbcore/include/wusb-wa.h"
-#include "uwb.h"
-
-#include "uwb-internal.h"
-
-/* The device uses commands and events from the WHCI specification, although
- * reporting itself as WUSB compliant. */
-#define WUSB_QUIRK_WHCI_CMD_EVT 0x01
-
-/**
- * Descriptor for an instance of the UWB Radio Control Driver that
- * attaches to the RCI interface of the Host Wired Adapter.
- *
- * Unless there is a lock specific to the 'data members', all access
- * is protected by uwb_rc->mutex.
- *
- * The NEEP (Notification/Event EndPoint) URB (@neep_urb) writes to
- * @rd_buffer. Note there is no locking because it is perfectly (heh!)
- * serialized--probe() submits an URB, callback is called, processes
- * the data (synchronously), submits another URB, and so on. There is
- * no concurrent access to the buffer.
- */
-struct hwarc {
- struct usb_device *usb_dev;
- struct usb_interface *usb_iface;
- struct uwb_rc *uwb_rc; /* UWB host controller */
- struct urb *neep_urb; /* Notification endpoint handling */
- struct edc neep_edc;
- void *rd_buffer; /* NEEP read buffer */
-};
-
-
-/* Beacon received notification (WUSB 1.0 [8.6.3.2]) */
-struct uwb_rc_evt_beacon_WUSB_0100 {
- struct uwb_rceb rceb;
- u8 bChannelNumber;
- __le16 wBPSTOffset;
- u8 bLQI;
- u8 bRSSI;
- __le16 wBeaconInfoLength;
- u8 BeaconInfo[];
-} __attribute__((packed));
-
-/**
- * Filter WUSB 1.0 BEACON RCV notification to be WHCI 0.95
- *
- * @header: the incoming event
- * @buf_size: size of buffer containing incoming event
- * @new_size: size of event after filtering completed
- *
- * The WHCI 0.95 spec has a "Beacon Type" field. This value is unknown at
- * the time we receive the beacon from WUSB so we just set it to
- * UWB_RC_BEACON_TYPE_NEIGHBOR as a default.
- * The solution below allocates memory upon receipt of every beacon from a
- * WUSB device. This will deteriorate performance. What is the right way to
- * do this?
- */
-static
-int hwarc_filter_evt_beacon_WUSB_0100(struct uwb_rc *rc,
- struct uwb_rceb **header,
- const size_t buf_size,
- size_t *new_size)
-{
- struct uwb_rc_evt_beacon_WUSB_0100 *be;
- struct uwb_rc_evt_beacon *newbe;
- size_t bytes_left, ielength;
- struct device *dev = &rc->uwb_dev.dev;
-
- be = container_of(*header, struct uwb_rc_evt_beacon_WUSB_0100, rceb);
- bytes_left = buf_size;
- if (bytes_left < sizeof(*be)) {
- dev_err(dev, "Beacon Received Notification: Not enough data "
- "to decode for filtering (%zu vs %zu bytes needed)\n",
- bytes_left, sizeof(*be));
- return -EINVAL;
- }
- bytes_left -= sizeof(*be);
- ielength = le16_to_cpu(be->wBeaconInfoLength);
- if (bytes_left < ielength) {
- dev_err(dev, "Beacon Received Notification: Not enough data "
- "to decode IEs (%zu vs %zu bytes needed)\n",
- bytes_left, ielength);
- return -EINVAL;
- }
- newbe = kzalloc(sizeof(*newbe) + ielength, GFP_ATOMIC);
- if (newbe == NULL)
- return -ENOMEM;
- newbe->rceb = be->rceb;
- newbe->bChannelNumber = be->bChannelNumber;
- newbe->bBeaconType = UWB_RC_BEACON_TYPE_NEIGHBOR;
- newbe->wBPSTOffset = be->wBPSTOffset;
- newbe->bLQI = be->bLQI;
- newbe->bRSSI = be->bRSSI;
- newbe->wBeaconInfoLength = be->wBeaconInfoLength;
- memcpy(newbe->BeaconInfo, be->BeaconInfo, ielength);
- *header = &newbe->rceb;
- *new_size = sizeof(*newbe) + ielength;
- return 1; /* calling function will free memory */
-}
-
-
-/* DRP Availability change notification (WUSB 1.0 [8.6.3.8]) */
-struct uwb_rc_evt_drp_avail_WUSB_0100 {
- struct uwb_rceb rceb;
- __le16 wIELength;
- u8 IEData[];
-} __attribute__((packed));
-
-/**
- * Filter WUSB 1.0 DRP AVAILABILITY CHANGE notification to be WHCI 0.95
- *
- * @header: the incoming event
- * @buf_size: size of buffer containing incoming event
- * @new_size: size of event after filtering completed
- */
-static
-int hwarc_filter_evt_drp_avail_WUSB_0100(struct uwb_rc *rc,
- struct uwb_rceb **header,
- const size_t buf_size,
- size_t *new_size)
-{
- struct uwb_rc_evt_drp_avail_WUSB_0100 *da;
- struct uwb_rc_evt_drp_avail *newda;
- struct uwb_ie_hdr *ie_hdr;
- size_t bytes_left, ielength;
- struct device *dev = &rc->uwb_dev.dev;
-
-
- da = container_of(*header, struct uwb_rc_evt_drp_avail_WUSB_0100, rceb);
- bytes_left = buf_size;
- if (bytes_left < sizeof(*da)) {
- dev_err(dev, "Not enough data to decode DRP Avail "
- "Notification for filtering. Expected %zu, "
- "received %zu.\n", (size_t)sizeof(*da), bytes_left);
- return -EINVAL;
- }
- bytes_left -= sizeof(*da);
- ielength = le16_to_cpu(da->wIELength);
- if (bytes_left < ielength) {
- dev_err(dev, "DRP Avail Notification filter: IE length "
- "[%zu bytes] does not match actual length "
- "[%zu bytes].\n", ielength, bytes_left);
- return -EINVAL;
- }
- if (ielength < sizeof(*ie_hdr)) {
- dev_err(dev, "DRP Avail Notification filter: Not enough "
- "data to decode IE [%zu bytes, %zu needed]\n",
- ielength, sizeof(*ie_hdr));
- return -EINVAL;
- }
- ie_hdr = (void *) da->IEData;
- if (ie_hdr->length > 32) {
- dev_err(dev, "DRP Availability Change event has unexpected "
- "length for filtering. Expected < 32 bytes, "
- "got %zu bytes.\n", (size_t)ie_hdr->length);
- return -EINVAL;
- }
- newda = kzalloc(sizeof(*newda), GFP_ATOMIC);
- if (newda == NULL)
- return -ENOMEM;
- newda->rceb = da->rceb;
- memcpy(newda->bmp, (u8 *) ie_hdr + sizeof(*ie_hdr), ie_hdr->length);
- *header = &newda->rceb;
- *new_size = sizeof(*newda);
- return 1; /* calling function will free memory */
-}
-
-
-/* DRP notification (WUSB 1.0 [8.6.3.9]) */
-struct uwb_rc_evt_drp_WUSB_0100 {
- struct uwb_rceb rceb;
- struct uwb_dev_addr wSrcAddr;
- u8 bExplicit;
- __le16 wIELength;
- u8 IEData[];
-} __attribute__((packed));
-
-/**
- * Filter WUSB 1.0 DRP Notification to be WHCI 0.95
- *
- * @header: the incoming event
- * @buf_size: size of buffer containing incoming event
- * @new_size: size of event after filtering completed
- *
- * It is hard to manage DRP reservations without having a Reason code.
- * Unfortunately there is none in the WUSB spec. We just set the default to
- * DRP IE RECEIVED.
- * We do not currently use the bBeaconSlotNumber value, so we set this to
- * zero for now.
- */
-static
-int hwarc_filter_evt_drp_WUSB_0100(struct uwb_rc *rc,
- struct uwb_rceb **header,
- const size_t buf_size,
- size_t *new_size)
-{
- struct uwb_rc_evt_drp_WUSB_0100 *drpev;
- struct uwb_rc_evt_drp *newdrpev;
- size_t bytes_left, ielength;
- struct device *dev = &rc->uwb_dev.dev;
-
- drpev = container_of(*header, struct uwb_rc_evt_drp_WUSB_0100, rceb);
- bytes_left = buf_size;
- if (bytes_left < sizeof(*drpev)) {
- dev_err(dev, "Not enough data to decode DRP Notification "
- "for filtering. Expected %zu, received %zu.\n",
- (size_t)sizeof(*drpev), bytes_left);
- return -EINVAL;
- }
- ielength = le16_to_cpu(drpev->wIELength);
- bytes_left -= sizeof(*drpev);
- if (bytes_left < ielength) {
- dev_err(dev, "DRP Notification filter: header length [%zu "
- "bytes] does not match actual length [%zu "
- "bytes].\n", ielength, bytes_left);
- return -EINVAL;
- }
- newdrpev = kzalloc(sizeof(*newdrpev) + ielength, GFP_ATOMIC);
- if (newdrpev == NULL)
- return -ENOMEM;
- newdrpev->rceb = drpev->rceb;
- newdrpev->src_addr = drpev->wSrcAddr;
- newdrpev->reason = UWB_DRP_NOTIF_DRP_IE_RCVD;
- newdrpev->beacon_slot_number = 0;
- newdrpev->ie_length = drpev->wIELength;
- memcpy(newdrpev->ie_data, drpev->IEData, ielength);
- *header = &newdrpev->rceb;
- *new_size = sizeof(*newdrpev) + ielength;
- return 1; /* calling function will free memory */
-}
-
-
-/* Scan Command (WUSB 1.0 [8.6.2.5]) */
-struct uwb_rc_cmd_scan_WUSB_0100 {
- struct uwb_rccb rccb;
- u8 bChannelNumber;
- u8 bScanState;
-} __attribute__((packed));
-
-/**
- * Filter WHCI 0.95 SCAN command to be WUSB 1.0 SCAN command
- *
- * @header: command sent to device (compliant to WHCI 0.95)
- * @size: size of command sent to device
- *
- * We only reduce the size by two bytes because the WUSB 1.0 scan command
- * does not have the last field (wStarttime). Also, make sure we don't send
- * the device an unexpected scan type.
- */
-static
-int hwarc_filter_cmd_scan_WUSB_0100(struct uwb_rc *rc,
- struct uwb_rccb **header,
- size_t *size)
-{
- struct uwb_rc_cmd_scan *sc;
-
- sc = container_of(*header, struct uwb_rc_cmd_scan, rccb);
-
- if (sc->bScanState == UWB_SCAN_ONLY_STARTTIME)
- sc->bScanState = UWB_SCAN_ONLY;
- /* Don't send the last two bytes. */
- *size -= 2;
- return 0;
-}
-
-
-/* SET DRP IE command (WUSB 1.0 [8.6.2.7]) */
-struct uwb_rc_cmd_set_drp_ie_WUSB_0100 {
- struct uwb_rccb rccb;
- u8 bExplicit;
- __le16 wIELength;
- struct uwb_ie_drp IEData[];
-} __attribute__((packed));
-
-/**
- * Filter WHCI 0.95 SET DRP IE command to be WUSB 1.0 SET DRP IE command
- *
- * @header: command sent to device (compliant to WHCI 0.95)
- * @size: size of command sent to device
- *
- * WUSB has an extra bExplicit field - we assume always explicit
- * negotiation so this field is set. The command expected by the device is
- * thus larger than the one prepared by the driver so we need to
- * reallocate memory to accommodate this.
- * We trust the driver to send us the correct data so no checking is done
- * on incoming data - evn though it is variable length.
- */
-static
-int hwarc_filter_cmd_set_drp_ie_WUSB_0100(struct uwb_rc *rc,
- struct uwb_rccb **header,
- size_t *size)
-{
- struct uwb_rc_cmd_set_drp_ie *orgcmd;
- struct uwb_rc_cmd_set_drp_ie_WUSB_0100 *cmd;
- size_t ielength;
-
- orgcmd = container_of(*header, struct uwb_rc_cmd_set_drp_ie, rccb);
- ielength = le16_to_cpu(orgcmd->wIELength);
- cmd = kzalloc(sizeof(*cmd) + ielength, GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
- cmd->rccb = orgcmd->rccb;
- cmd->bExplicit = 0;
- cmd->wIELength = orgcmd->wIELength;
- memcpy(cmd->IEData, orgcmd->IEData, ielength);
- *header = &cmd->rccb;
- *size = sizeof(*cmd) + ielength;
- return 1; /* calling function will free memory */
-}
-
-
-/**
- * Filter data from WHCI driver to WUSB device
- *
- * @header: WHCI 0.95 compliant command from driver
- * @size: length of command
- *
- * The routine managing commands to the device (uwb_rc_cmd()) will call the
- * filtering function pointer (if it exists) before it passes any data to
- * the device. At this time the command has been formatted according to
- * WHCI 0.95 and is ready to be sent to the device.
- *
- * The filter function will be provided with the current command and its
- * length. The function will manipulate the command if necessary and
- * potentially reallocate memory for a command that needed more memory that
- * the given command. If new memory was created the function will return 1
- * to indicate to the calling function that the memory need to be freed
- * when not needed any more. The size will contain the new length of the
- * command.
- * If memory has not been allocated we rely on the original mechanisms to
- * free the memory of the command - even when we reduce the value of size.
- */
-static
-int hwarc_filter_cmd_WUSB_0100(struct uwb_rc *rc, struct uwb_rccb **header,
- size_t *size)
-{
- int result;
- struct uwb_rccb *rccb = *header;
- int cmd = le16_to_cpu(rccb->wCommand);
- switch (cmd) {
- case UWB_RC_CMD_SCAN:
- result = hwarc_filter_cmd_scan_WUSB_0100(rc, header, size);
- break;
- case UWB_RC_CMD_SET_DRP_IE:
- result = hwarc_filter_cmd_set_drp_ie_WUSB_0100(rc, header, size);
- break;
- default:
- result = -ENOANO;
- break;
- }
- return result;
-}
-
-
-/**
- * Filter data from WHCI driver to WUSB device
- *
- * @header: WHCI 0.95 compliant command from driver
- * @size: length of command
- *
- * Filter commands based on which protocol the device supports. The WUSB
- * errata should be the same as WHCI 0.95 so we do not filter that here -
- * only WUSB 1.0.
- */
-static
-int hwarc_filter_cmd(struct uwb_rc *rc, struct uwb_rccb **header,
- size_t *size)
-{
- int result = -ENOANO;
- if (rc->version == 0x0100)
- result = hwarc_filter_cmd_WUSB_0100(rc, header, size);
- return result;
-}
-
-
-/**
- * Compute return value as sum of incoming value and value at given offset
- *
- * @rceb: event for which we compute the size, it contains a variable
- * length field.
- * @core_size: size of the "non variable" part of the event
- * @offset: place in event where the length of the variable part is stored
- * @buf_size: total length of buffer in which event arrived - we need to make
- * sure we read the offset in memory that is still part of the event
- */
-static
-ssize_t hwarc_get_event_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
- size_t core_size, size_t offset,
- const size_t buf_size)
-{
- ssize_t size = -ENOSPC;
- const void *ptr = rceb;
- size_t type_size = sizeof(__le16);
- struct device *dev = &rc->uwb_dev.dev;
-
- if (offset + type_size >= buf_size) {
- dev_err(dev, "Not enough data to read extra size of event "
- "0x%02x/%04x/%02x, only got %zu bytes.\n",
- rceb->bEventType, le16_to_cpu(rceb->wEvent),
- rceb->bEventContext, buf_size);
- goto out;
- }
- ptr += offset;
- size = core_size + le16_to_cpu(*(__le16 *)ptr);
-out:
- return size;
-}
-
-
-/* Beacon slot change notification (WUSB 1.0 [8.6.3.5]) */
-struct uwb_rc_evt_bp_slot_change_WUSB_0100 {
- struct uwb_rceb rceb;
- u8 bSlotNumber;
-} __attribute__((packed));
-
-
-/**
- * Filter data from WUSB device to WHCI driver
- *
- * @header: incoming event
- * @buf_size: size of buffer in which event arrived
- * @_event_size: actual size of event in the buffer
- * @new_size: size of event after filtered
- *
- * We don't know how the buffer is constructed - there may be more than one
- * event in it so buffer length does not determine event length. We first
- * determine the expected size of the incoming event. This value is passed
- * back only if the actual filtering succeeded (so we know the computed
- * expected size is correct). This value will be zero if
- * the event did not need any filtering.
- *
- * WHCI interprets the BP Slot Change event's data differently than
- * WUSB. The event sizes are exactly the same. The data field
- * indicates the new beacon slot in which a RC is transmitting its
- * beacon. The maximum value of this is 96 (wMacBPLength ECMA-368
- * 17.16 (Table 117)). We thus know that the WUSB value will not set
- * the bit bNoSlot, so we don't really do anything (placeholder).
- */
-static
-int hwarc_filter_event_WUSB_0100(struct uwb_rc *rc, struct uwb_rceb **header,
- const size_t buf_size, size_t *_real_size,
- size_t *_new_size)
-{
- int result = -ENOANO;
- struct uwb_rceb *rceb = *header;
- int event = le16_to_cpu(rceb->wEvent);
- ssize_t event_size;
- size_t core_size, offset;
-
- if (rceb->bEventType != UWB_RC_CET_GENERAL)
- goto out;
- switch (event) {
- case UWB_RC_EVT_BEACON:
- core_size = sizeof(struct uwb_rc_evt_beacon_WUSB_0100);
- offset = offsetof(struct uwb_rc_evt_beacon_WUSB_0100,
- wBeaconInfoLength);
- event_size = hwarc_get_event_size(rc, rceb, core_size,
- offset, buf_size);
- if (event_size < 0)
- goto out;
- *_real_size = event_size;
- result = hwarc_filter_evt_beacon_WUSB_0100(rc, header,
- buf_size, _new_size);
- break;
- case UWB_RC_EVT_BP_SLOT_CHANGE:
- *_new_size = *_real_size =
- sizeof(struct uwb_rc_evt_bp_slot_change_WUSB_0100);
- result = 0;
- break;
-
- case UWB_RC_EVT_DRP_AVAIL:
- core_size = sizeof(struct uwb_rc_evt_drp_avail_WUSB_0100);
- offset = offsetof(struct uwb_rc_evt_drp_avail_WUSB_0100,
- wIELength);
- event_size = hwarc_get_event_size(rc, rceb, core_size,
- offset, buf_size);
- if (event_size < 0)
- goto out;
- *_real_size = event_size;
- result = hwarc_filter_evt_drp_avail_WUSB_0100(
- rc, header, buf_size, _new_size);
- break;
-
- case UWB_RC_EVT_DRP:
- core_size = sizeof(struct uwb_rc_evt_drp_WUSB_0100);
- offset = offsetof(struct uwb_rc_evt_drp_WUSB_0100, wIELength);
- event_size = hwarc_get_event_size(rc, rceb, core_size,
- offset, buf_size);
- if (event_size < 0)
- goto out;
- *_real_size = event_size;
- result = hwarc_filter_evt_drp_WUSB_0100(rc, header,
- buf_size, _new_size);
- break;
-
- default:
- break;
- }
-out:
- return result;
-}
-
-/**
- * Filter data from WUSB device to WHCI driver
- *
- * @header: incoming event
- * @buf_size: size of buffer in which event arrived
- * @_event_size: actual size of event in the buffer
- * @_new_size: size of event after filtered
- *
- * Filter events based on which protocol the device supports. The WUSB
- * errata should be the same as WHCI 0.95 so we do not filter that here -
- * only WUSB 1.0.
- *
- * If we don't handle it, we return -ENOANO (why the weird error code?
- * well, so if I get it, I can pinpoint in the code that raised
- * it...after all, not too many places use the higher error codes).
- */
-static
-int hwarc_filter_event(struct uwb_rc *rc, struct uwb_rceb **header,
- const size_t buf_size, size_t *_real_size,
- size_t *_new_size)
-{
- int result = -ENOANO;
- if (rc->version == 0x0100)
- result = hwarc_filter_event_WUSB_0100(
- rc, header, buf_size, _real_size, _new_size);
- return result;
-}
-
-
-/**
- * Execute an UWB RC command on HWA
- *
- * @rc: Instance of a Radio Controller that is a HWA
- * @cmd: Buffer containing the RCCB and payload to execute
- * @cmd_size: Size of the command buffer.
- *
- * NOTE: rc's mutex has to be locked
- */
-static
-int hwarc_cmd(struct uwb_rc *uwb_rc, const struct uwb_rccb *cmd, size_t cmd_size)
-{
- struct hwarc *hwarc = uwb_rc->priv;
- return usb_control_msg(
- hwarc->usb_dev, usb_sndctrlpipe(hwarc->usb_dev, 0),
- WA_EXEC_RC_CMD, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, hwarc->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- (void *) cmd, cmd_size, 100 /* FIXME: this is totally arbitrary */);
-}
-
-static
-int hwarc_reset(struct uwb_rc *uwb_rc)
-{
- struct hwarc *hwarc = uwb_rc->priv;
- int result;
-
- /* device lock must be held when calling usb_reset_device. */
- result = usb_lock_device_for_reset(hwarc->usb_dev, NULL);
- if (result >= 0) {
- result = usb_reset_device(hwarc->usb_dev);
- usb_unlock_device(hwarc->usb_dev);
- }
-
- return result;
-}
-
-/**
- * Callback for the notification and event endpoint
- *
- * Check's that everything is fine and then passes the read data to
- * the notification/event handling mechanism (neh).
- */
-static
-void hwarc_neep_cb(struct urb *urb)
-{
- struct hwarc *hwarc = urb->context;
- struct usb_interface *usb_iface = hwarc->usb_iface;
- struct device *dev = &usb_iface->dev;
- int result;
-
- switch (result = urb->status) {
- case 0:
- uwb_rc_neh_grok(hwarc->uwb_rc, urb->transfer_buffer,
- urb->actual_length);
- break;
- case -ECONNRESET: /* Not an error, but a controlled situation; */
- case -ENOENT: /* (we killed the URB)...so, no broadcast */
- goto out;
- case -ESHUTDOWN: /* going away! */
- goto out;
- default: /* On general errors, retry unless it gets ugly */
- if (edc_inc(&hwarc->neep_edc, EDC_MAX_ERRORS,
- EDC_ERROR_TIMEFRAME))
- goto error_exceeded;
- dev_err(dev, "NEEP: URB error %d\n", urb->status);
- }
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result < 0 && result != -ENODEV && result != -EPERM) {
- /* ignoring unrecoverable errors */
- dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n",
- result);
- goto error;
- }
-out:
- return;
-
-error_exceeded:
- dev_err(dev, "NEEP: URB max acceptable errors "
- "exceeded, resetting device\n");
-error:
- uwb_rc_neh_error(hwarc->uwb_rc, result);
- uwb_rc_reset_all(hwarc->uwb_rc);
- return;
-}
-
-static void hwarc_init(struct hwarc *hwarc)
-{
- edc_init(&hwarc->neep_edc);
-}
-
-/**
- * Initialize the notification/event endpoint stuff
- *
- * Note this is effectively a parallel thread; it knows that
- * hwarc->uwb_rc always exists because the existence of a 'hwarc'
- * means that there is a reverence on the hwarc->uwb_rc (see
- * _probe()), and thus _neep_cb() can execute safely.
- */
-static int hwarc_neep_init(struct uwb_rc *rc)
-{
- struct hwarc *hwarc = rc->priv;
- struct usb_interface *iface = hwarc->usb_iface;
- struct usb_device *usb_dev = interface_to_usbdev(iface);
- struct device *dev = &iface->dev;
- int result;
- struct usb_endpoint_descriptor *epd;
-
- epd = &iface->cur_altsetting->endpoint[0].desc;
- hwarc->rd_buffer = (void *) __get_free_page(GFP_KERNEL);
- if (hwarc->rd_buffer == NULL) {
- dev_err(dev, "Unable to allocate notification's read buffer\n");
- goto error_rd_buffer;
- }
- hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (hwarc->neep_urb == NULL)
- goto error_urb_alloc;
- usb_fill_int_urb(hwarc->neep_urb, usb_dev,
- usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
- hwarc->rd_buffer, PAGE_SIZE,
- hwarc_neep_cb, hwarc, epd->bInterval);
- result = usb_submit_urb(hwarc->neep_urb, GFP_ATOMIC);
- if (result < 0) {
- dev_err(dev, "Cannot submit notification URB: %d\n", result);
- goto error_neep_submit;
- }
- return 0;
-
-error_neep_submit:
- usb_free_urb(hwarc->neep_urb);
- hwarc->neep_urb = NULL;
-error_urb_alloc:
- free_page((unsigned long)hwarc->rd_buffer);
- hwarc->rd_buffer = NULL;
-error_rd_buffer:
- return -ENOMEM;
-}
-
-
-/** Clean up all the notification endpoint resources */
-static void hwarc_neep_release(struct uwb_rc *rc)
-{
- struct hwarc *hwarc = rc->priv;
-
- usb_kill_urb(hwarc->neep_urb);
- usb_free_urb(hwarc->neep_urb);
- hwarc->neep_urb = NULL;
-
- free_page((unsigned long)hwarc->rd_buffer);
- hwarc->rd_buffer = NULL;
-}
-
-/**
- * Get the version from class-specific descriptor
- *
- * NOTE: this descriptor comes with the big bundled configuration
- * descriptor that includes the interfaces' and endpoints', so
- * we just look for it in the cached copy kept by the USB stack.
- *
- * NOTE2: We convert LE fields to CPU order.
- */
-static int hwarc_get_version(struct uwb_rc *rc)
-{
- int result;
-
- struct hwarc *hwarc = rc->priv;
- struct uwb_rc_control_intf_class_desc *descr;
- struct device *dev = &rc->uwb_dev.dev;
- struct usb_device *usb_dev = hwarc->usb_dev;
- char *itr;
- struct usb_descriptor_header *hdr;
- size_t itr_size, actconfig_idx;
- u16 version;
-
- actconfig_idx = (usb_dev->actconfig - usb_dev->config) /
- sizeof(usb_dev->config[0]);
- itr = usb_dev->rawdescriptors[actconfig_idx];
- itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
- while (itr_size >= sizeof(*hdr)) {
- hdr = (struct usb_descriptor_header *) itr;
- dev_dbg(dev, "Extra device descriptor: "
- "type %02x/%u bytes @ %zu (%zu left)\n",
- hdr->bDescriptorType, hdr->bLength,
- (itr - usb_dev->rawdescriptors[actconfig_idx]),
- itr_size);
- if (hdr->bDescriptorType == USB_DT_CS_RADIO_CONTROL)
- goto found;
- itr += hdr->bLength;
- itr_size -= hdr->bLength;
- }
- dev_err(dev, "cannot find Radio Control Interface Class descriptor\n");
- return -ENODEV;
-
-found:
- result = -EINVAL;
- if (hdr->bLength > itr_size) { /* is it available? */
- dev_err(dev, "incomplete Radio Control Interface Class "
- "descriptor (%zu bytes left, %u needed)\n",
- itr_size, hdr->bLength);
- goto error;
- }
- if (hdr->bLength < sizeof(*descr)) {
- dev_err(dev, "short Radio Control Interface Class "
- "descriptor\n");
- goto error;
- }
- descr = (struct uwb_rc_control_intf_class_desc *) hdr;
- /* Make LE fields CPU order */
- version = __le16_to_cpu(descr->bcdRCIVersion);
- if (version != 0x0100) {
- dev_err(dev, "Device reports protocol version 0x%04x. We "
- "do not support that. \n", version);
- result = -EINVAL;
- goto error;
- }
- rc->version = version;
- dev_dbg(dev, "Device supports WUSB protocol version 0x%04x \n", rc->version);
- result = 0;
-error:
- return result;
-}
-
-/*
- * By creating a 'uwb_rc', we have a reference on it -- that reference
- * is the one we drop when we disconnect.
- *
- * No need to switch altsettings; according to WUSB1.0[8.6.1.1], there
- * is only one altsetting allowed.
- */
-static int hwarc_probe(struct usb_interface *iface,
- const struct usb_device_id *id)
-{
- int result;
- struct uwb_rc *uwb_rc;
- struct hwarc *hwarc;
- struct device *dev = &iface->dev;
-
- if (iface->cur_altsetting->desc.bNumEndpoints < 1)
- return -ENODEV;
- if (!usb_endpoint_xfer_int(&iface->cur_altsetting->endpoint[0].desc))
- return -ENODEV;
-
- result = -ENOMEM;
- uwb_rc = uwb_rc_alloc();
- if (uwb_rc == NULL) {
- dev_err(dev, "unable to allocate RC instance\n");
- goto error_rc_alloc;
- }
- hwarc = kzalloc(sizeof(*hwarc), GFP_KERNEL);
- if (hwarc == NULL) {
- dev_err(dev, "unable to allocate HWA RC instance\n");
- goto error_alloc;
- }
- hwarc_init(hwarc);
- hwarc->usb_dev = usb_get_dev(interface_to_usbdev(iface));
- hwarc->usb_iface = usb_get_intf(iface);
- hwarc->uwb_rc = uwb_rc;
-
- uwb_rc->owner = THIS_MODULE;
- uwb_rc->start = hwarc_neep_init;
- uwb_rc->stop = hwarc_neep_release;
- uwb_rc->cmd = hwarc_cmd;
- uwb_rc->reset = hwarc_reset;
- if (id->driver_info & WUSB_QUIRK_WHCI_CMD_EVT) {
- uwb_rc->filter_cmd = NULL;
- uwb_rc->filter_event = NULL;
- } else {
- uwb_rc->filter_cmd = hwarc_filter_cmd;
- uwb_rc->filter_event = hwarc_filter_event;
- }
-
- result = uwb_rc_add(uwb_rc, dev, hwarc);
- if (result < 0)
- goto error_rc_add;
- result = hwarc_get_version(uwb_rc);
- if (result < 0) {
- dev_err(dev, "cannot retrieve version of RC \n");
- goto error_get_version;
- }
- usb_set_intfdata(iface, hwarc);
- return 0;
-
-error_get_version:
- uwb_rc_rm(uwb_rc);
-error_rc_add:
- usb_put_intf(iface);
- usb_put_dev(hwarc->usb_dev);
- kfree(hwarc);
-error_alloc:
- uwb_rc_put(uwb_rc);
-error_rc_alloc:
- return result;
-}
-
-static void hwarc_disconnect(struct usb_interface *iface)
-{
- struct hwarc *hwarc = usb_get_intfdata(iface);
- struct uwb_rc *uwb_rc = hwarc->uwb_rc;
-
- usb_set_intfdata(hwarc->usb_iface, NULL);
- uwb_rc_rm(uwb_rc);
- usb_put_intf(hwarc->usb_iface);
- usb_put_dev(hwarc->usb_dev);
- kfree(hwarc);
- uwb_rc_put(uwb_rc); /* when creating the device, refcount = 1 */
-}
-
-static int hwarc_pre_reset(struct usb_interface *iface)
-{
- struct hwarc *hwarc = usb_get_intfdata(iface);
- struct uwb_rc *uwb_rc = hwarc->uwb_rc;
-
- uwb_rc_pre_reset(uwb_rc);
- return 0;
-}
-
-static int hwarc_post_reset(struct usb_interface *iface)
-{
- struct hwarc *hwarc = usb_get_intfdata(iface);
- struct uwb_rc *uwb_rc = hwarc->uwb_rc;
-
- return uwb_rc_post_reset(uwb_rc);
-}
-
-/** USB device ID's that we handle */
-static const struct usb_device_id hwarc_id_table[] = {
- /* D-Link DUB-1210 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3d02, 0xe0, 0x01, 0x02),
- .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
- /* Intel i1480 (using firmware 1.3PA2-20070828) */
- { USB_DEVICE_AND_INTERFACE_INFO(0x8086, 0x0c3b, 0xe0, 0x01, 0x02),
- .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
- /* Alereon 5310 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x01, 0x02),
- .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
- /* Alereon 5611 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x01, 0x02),
- .driver_info = WUSB_QUIRK_WHCI_CMD_EVT },
- /* Generic match for the Radio Control interface */
- { USB_INTERFACE_INFO(0xe0, 0x01, 0x02), },
- { },
-};
-MODULE_DEVICE_TABLE(usb, hwarc_id_table);
-
-static struct usb_driver hwarc_driver = {
- .name = "hwa-rc",
- .id_table = hwarc_id_table,
- .probe = hwarc_probe,
- .disconnect = hwarc_disconnect,
- .pre_reset = hwarc_pre_reset,
- .post_reset = hwarc_post_reset,
-};
-
-module_usb_driver(hwarc_driver);
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("Host Wireless Adapter Radio Control Driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_UWB_I1480U) += dfu/ i1480-est.o
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_UWB_I1480U) += i1480-dfu-usb.o
-
-i1480-dfu-usb-objs := \
- dfu.o \
- mac.o \
- phy.o \
- usb.o
-
-
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Wireless UWB Link 1480
- * Main driver
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * Common code for firmware upload used by the USB and PCI version;
- * i1480_fw_upload() takes a device descriptor and uses the function
- * pointers it provides to upload firmware and prepare the PHY.
- *
- * As well, provides common functions used by the rest of the code.
- */
-#include "i1480-dfu.h"
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/device.h>
-#include <linux/random.h>
-#include <linux/export.h>
-#include "../../uwb.h"
-
-/*
- * i1480_rceb_check - Check RCEB for expected field values
- * @i1480: pointer to device for which RCEB is being checked
- * @rceb: RCEB being checked
- * @cmd: which command the RCEB is related to
- * @context: expected context
- * @expected_type: expected event type
- * @expected_event: expected event
- *
- * If @cmd is NULL, do not print error messages, but still return an error
- * code.
- *
- * Return 0 if @rceb matches the expected values, -EINVAL otherwise.
- */
-int i1480_rceb_check(const struct i1480 *i1480, const struct uwb_rceb *rceb,
- const char *cmd, u8 context, u8 expected_type,
- unsigned expected_event)
-{
- int result = 0;
- struct device *dev = i1480->dev;
- if (rceb->bEventContext != context) {
- if (cmd)
- dev_err(dev, "%s: unexpected context id 0x%02x "
- "(expected 0x%02x)\n", cmd,
- rceb->bEventContext, context);
- result = -EINVAL;
- }
- if (rceb->bEventType != expected_type) {
- if (cmd)
- dev_err(dev, "%s: unexpected event type 0x%02x "
- "(expected 0x%02x)\n", cmd,
- rceb->bEventType, expected_type);
- result = -EINVAL;
- }
- if (le16_to_cpu(rceb->wEvent) != expected_event) {
- if (cmd)
- dev_err(dev, "%s: unexpected event 0x%04x "
- "(expected 0x%04x)\n", cmd,
- le16_to_cpu(rceb->wEvent), expected_event);
- result = -EINVAL;
- }
- return result;
-}
-EXPORT_SYMBOL_GPL(i1480_rceb_check);
-
-
-/*
- * Execute a Radio Control Command
- *
- * Command data has to be in i1480->cmd_buf.
- *
- * @returns size of the reply data filled in i1480->evt_buf or < 0 errno
- * code on error.
- */
-ssize_t i1480_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size,
- size_t reply_size)
-{
- ssize_t result;
- struct uwb_rceb *reply = i1480->evt_buf;
- struct uwb_rccb *cmd = i1480->cmd_buf;
- u16 expected_event = reply->wEvent;
- u8 expected_type = reply->bEventType;
- u8 context;
-
- init_completion(&i1480->evt_complete);
- i1480->evt_result = -EINPROGRESS;
- do {
- get_random_bytes(&context, 1);
- } while (context == 0x00 || context == 0xff);
- cmd->bCommandContext = context;
- result = i1480->cmd(i1480, cmd_name, cmd_size);
- if (result < 0)
- goto error;
- /* wait for the callback to report a event was received */
- result = wait_for_completion_interruptible_timeout(
- &i1480->evt_complete, HZ);
- if (result == 0) {
- result = -ETIMEDOUT;
- goto error;
- }
- if (result < 0)
- goto error;
- result = i1480->evt_result;
- if (result < 0) {
- dev_err(i1480->dev, "%s: command reply reception failed: %zd\n",
- cmd_name, result);
- goto error;
- }
- /*
- * Firmware versions >= 1.4.12224 for IOGear GUWA100U generate a
- * spurious notification after firmware is downloaded. So check whether
- * the receibed RCEB is such notification before assuming that the
- * command has failed.
- */
- if (i1480_rceb_check(i1480, i1480->evt_buf, NULL,
- 0, 0xfd, 0x0022) == 0) {
- /* Now wait for the actual RCEB for this command. */
- result = i1480->wait_init_done(i1480);
- if (result < 0)
- goto error;
- result = i1480->evt_result;
- }
- if (result != reply_size) {
- dev_err(i1480->dev, "%s returned only %zu bytes, %zu expected\n",
- cmd_name, result, reply_size);
- result = -EINVAL;
- goto error;
- }
- /* Verify we got the right event in response */
- result = i1480_rceb_check(i1480, i1480->evt_buf, cmd_name, context,
- expected_type, expected_event);
-error:
- return result;
-}
-EXPORT_SYMBOL_GPL(i1480_cmd);
-
-
-static
-int i1480_print_state(struct i1480 *i1480)
-{
- int result;
- u32 *buf = (u32 *) i1480->cmd_buf;
-
- result = i1480->read(i1480, 0x80080000, 2 * sizeof(*buf));
- if (result < 0) {
- dev_err(i1480->dev, "cannot read U & L states: %d\n", result);
- goto error;
- }
- dev_info(i1480->dev, "state U 0x%08x, L 0x%08x\n", buf[0], buf[1]);
-error:
- return result;
-}
-
-
-/*
- * PCI probe, firmware uploader
- *
- * _mac_fw_upload() will call rc_setup(), which needs an rc_release().
- */
-int i1480_fw_upload(struct i1480 *i1480)
-{
- int result;
-
- result = i1480_pre_fw_upload(i1480); /* PHY pre fw */
- if (result < 0 && result != -ENOENT) {
- i1480_print_state(i1480);
- goto error;
- }
- result = i1480_mac_fw_upload(i1480); /* MAC fw */
- if (result < 0) {
- if (result == -ENOENT)
- dev_err(i1480->dev, "Cannot locate MAC FW file '%s'\n",
- i1480->mac_fw_name);
- else
- i1480_print_state(i1480);
- goto error;
- }
- result = i1480_phy_fw_upload(i1480); /* PHY fw */
- if (result < 0 && result != -ENOENT) {
- i1480_print_state(i1480);
- goto error_rc_release;
- }
- /*
- * FIXME: find some reliable way to check whether firmware is running
- * properly. Maybe use some standard request that has no side effects?
- */
- dev_info(i1480->dev, "firmware uploaded successfully\n");
-error_rc_release:
- if (i1480->rc_release)
- i1480->rc_release(i1480);
- result = 0;
-error:
- return result;
-}
-EXPORT_SYMBOL_GPL(i1480_fw_upload);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * i1480 Device Firmware Upload
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This driver is the firmware uploader for the Intel Wireless UWB
- * Link 1480 device (both in the USB and PCI incarnations).
- *
- * The process is quite simple: we stop the device, write the firmware
- * to its memory and then restart it. Wait for the device to let us
- * know it is done booting firmware. Ready.
- *
- * We might have to upload before or after a phy firmware (which might
- * be done in two methods, using a normal firmware image or through
- * the MPI port).
- *
- * Because USB and PCI use common methods, we just make ops out of the
- * common operations (read, write, wait_init_done and cmd) and
- * implement them in usb.c and pci.c.
- *
- * The flow is (some parts omitted):
- *
- * i1480_{usb,pci}_probe() On enumerate/discovery
- * i1480_fw_upload()
- * i1480_pre_fw_upload()
- * __mac_fw_upload()
- * fw_hdrs_load()
- * mac_fw_hdrs_push()
- * i1480->write() [i1480_{usb,pci}_write()]
- * i1480_fw_cmp()
- * i1480->read() [i1480_{usb,pci}_read()]
- * i1480_mac_fw_upload()
- * __mac_fw_upload()
- * i1480->setup(()
- * i1480->wait_init_done()
- * i1480_cmd_reset()
- * i1480->cmd() [i1480_{usb,pci}_cmd()]
- * ...
- * i1480_phy_fw_upload()
- * request_firmware()
- * i1480_mpi_write()
- * i1480->cmd() [i1480_{usb,pci}_cmd()]
- *
- * Once the probe function enumerates the device and uploads the
- * firmware, we just exit with -ENODEV, as we don't really want to
- * attach to the device.
- */
-#ifndef __i1480_DFU_H__
-#define __i1480_DFU_H__
-
-#include <linux/types.h>
-#include <linux/completion.h>
-#include "../../include/spec.h"
-
-#define i1480_FW_UPLOAD_MODE_MASK (cpu_to_le32(0x00000018))
-
-#if i1480_FW > 0x00000302
-#define i1480_RCEB_EXTENDED
-#endif
-
-struct uwb_rccb;
-struct uwb_rceb;
-
-/*
- * Common firmware upload handlers
- *
- * Normally you embed this struct in another one specific to your hw.
- *
- * @write Write to device's memory from buffer.
- * @read Read from device's memory to i1480->evt_buf.
- * @setup Setup device after basic firmware is uploaded
- * @wait_init_done
- * Wait for the device to send a notification saying init
- * is done.
- * @cmd FOP for issuing the command to the hardware. The
- * command data is contained in i1480->cmd_buf and the size
- * is supplied as an argument. The command replied is put
- * in i1480->evt_buf and the size in i1480->evt_result (or if
- * an error, a < 0 errno code).
- *
- * @cmd_buf Memory buffer used to send commands to the device.
- * Allocated by the upper layers i1480_fw_upload().
- * Size has to be @buf_size.
- * @evt_buf Memory buffer used to place the async notifications
- * received by the hw. Allocated by the upper layers
- * i1480_fw_upload().
- * Size has to be @buf_size.
- * @cmd_complete
- * Low level driver uses this to notify code waiting afor
- * an event that the event has arrived and data is in
- * i1480->evt_buf (and size/result in i1480->evt_result).
- * @hw_rev
- * Use this value to activate dfu code to support new revisions
- * of hardware. i1480_init() sets this to a default value.
- * It should be updated by the USB and PCI code.
- */
-struct i1480 {
- struct device *dev;
-
- int (*write)(struct i1480 *, u32 addr, const void *, size_t);
- int (*read)(struct i1480 *, u32 addr, size_t);
- int (*rc_setup)(struct i1480 *);
- void (*rc_release)(struct i1480 *);
- int (*wait_init_done)(struct i1480 *);
- int (*cmd)(struct i1480 *, const char *cmd_name, size_t cmd_size);
- const char *pre_fw_name;
- const char *mac_fw_name;
- const char *mac_fw_name_deprecate; /* FIXME: Will go away */
- const char *phy_fw_name;
- u8 hw_rev;
-
- size_t buf_size; /* size of both evt_buf and cmd_buf */
- void *evt_buf, *cmd_buf;
- ssize_t evt_result;
- struct completion evt_complete;
-};
-
-static inline
-void i1480_init(struct i1480 *i1480)
-{
- i1480->hw_rev = 1;
- init_completion(&i1480->evt_complete);
-}
-
-extern int i1480_fw_upload(struct i1480 *);
-extern int i1480_pre_fw_upload(struct i1480 *);
-extern int i1480_mac_fw_upload(struct i1480 *);
-extern int i1480_phy_fw_upload(struct i1480 *);
-extern ssize_t i1480_cmd(struct i1480 *, const char *, size_t, size_t);
-extern int i1480_rceb_check(const struct i1480 *,
- const struct uwb_rceb *, const char *, u8,
- u8, unsigned);
-
-enum {
- /* Vendor specific command type */
- i1480_CET_VS1 = 0xfd,
- /* i1480 commands */
- i1480_CMD_SET_IP_MAS = 0x000e,
- i1480_CMD_GET_MAC_PHY_INFO = 0x0003,
- i1480_CMD_MPI_WRITE = 0x000f,
- i1480_CMD_MPI_READ = 0x0010,
- /* i1480 events */
-#if i1480_FW > 0x00000302
- i1480_EVT_CONFIRM = 0x0002,
- i1480_EVT_RM_INIT_DONE = 0x0101,
- i1480_EVT_DEV_ADD = 0x0103,
- i1480_EVT_DEV_RM = 0x0104,
- i1480_EVT_DEV_ID_CHANGE = 0x0105,
- i1480_EVT_GET_MAC_PHY_INFO = i1480_CMD_GET_MAC_PHY_INFO,
-#else
- i1480_EVT_CONFIRM = 0x0002,
- i1480_EVT_RM_INIT_DONE = 0x0101,
- i1480_EVT_DEV_ADD = 0x0103,
- i1480_EVT_DEV_RM = 0x0104,
- i1480_EVT_DEV_ID_CHANGE = 0x0105,
- i1480_EVT_GET_MAC_PHY_INFO = i1480_EVT_CONFIRM,
-#endif
-};
-
-
-struct i1480_evt_confirm {
- struct uwb_rceb rceb;
-#ifdef i1480_RCEB_EXTENDED
- __le16 wParamLength;
-#endif
- u8 bResultCode;
-} __attribute__((packed));
-
-
-struct i1480_rceb {
- struct uwb_rceb rceb;
-#ifdef i1480_RCEB_EXTENDED
- __le16 wParamLength;
-#endif
-} __attribute__((packed));
-
-
-/**
- * Get MAC & PHY Information confirm event structure
- *
- * Confirm event returned by the command.
- */
-struct i1480_evt_confirm_GMPI {
-#if i1480_FW > 0x00000302
- struct uwb_rceb rceb;
- __le16 wParamLength;
- __le16 status;
- u8 mac_addr[6]; /* EUI-64 bit IEEE address [still 8 bytes?] */
- u8 dev_addr[2];
- __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */
- u8 hw_rev;
- u8 phy_vendor;
- u8 phy_rev; /* major v = >> 8; minor = v & 0xff */
- __le16 mac_caps;
- u8 phy_caps[3];
- u8 key_stores;
- __le16 mcast_addr_stores;
- u8 sec_mode_supported;
-#else
- struct uwb_rceb rceb;
- u8 status;
- u8 mac_addr[8]; /* EUI-64 bit IEEE address [still 8 bytes?] */
- u8 dev_addr[2];
- __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */
- __le16 phy_fw_rev; /* major v = >> 8; minor = v & 0xff */
- __le16 mac_caps;
- u8 phy_caps;
- u8 key_stores;
- __le16 mcast_addr_stores;
- u8 sec_mode_supported;
-#endif
-} __attribute__((packed));
-
-
-struct i1480_cmd_mpi_write {
- struct uwb_rccb rccb;
- __le16 size;
- u8 data[];
-};
-
-
-struct i1480_cmd_mpi_read {
- struct uwb_rccb rccb;
- __le16 size;
- struct {
- u8 page, offset;
- } __attribute__((packed)) data[];
-} __attribute__((packed));
-
-
-struct i1480_evt_mpi_read {
- struct uwb_rceb rceb;
-#ifdef i1480_RCEB_EXTENDED
- __le16 wParamLength;
-#endif
- u8 bResultCode;
- __le16 size;
- struct {
- u8 page, offset, value;
- } __attribute__((packed)) data[];
-} __attribute__((packed));
-
-
-#endif /* #ifndef __i1480_DFU_H__ */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Wireless UWB Link 1480
- * MAC Firmware upload implementation
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * Implementation of the code for parsing the firmware file (extract
- * the headers and binary code chunks) in the fw_*() functions. The
- * code to upload pre and mac firmwares is the same, so it uses a
- * common entry point in __mac_fw_upload(), which uses the i1480
- * function pointers to push the firmware to the device.
- */
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/slab.h>
-#include "../../uwb.h"
-#include "i1480-dfu.h"
-
-/*
- * Descriptor for a continuous segment of MAC fw data
- */
-struct fw_hdr {
- unsigned long address;
- size_t length;
- const u32 *bin;
- struct fw_hdr *next;
-};
-
-
-/* Free a chain of firmware headers */
-static
-void fw_hdrs_free(struct fw_hdr *hdr)
-{
- struct fw_hdr *next;
-
- while (hdr) {
- next = hdr->next;
- kfree(hdr);
- hdr = next;
- }
-}
-
-
-/* Fill a firmware header descriptor from a memory buffer */
-static
-int fw_hdr_load(struct i1480 *i1480, struct fw_hdr *hdr, unsigned hdr_cnt,
- const char *_data, const u32 *data_itr, const u32 *data_top)
-{
- size_t hdr_offset = (const char *) data_itr - _data;
- size_t remaining_size = (void *) data_top - (void *) data_itr;
- if (data_itr + 2 > data_top) {
- dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in header at "
- "offset %zu, limit %zu\n",
- hdr_cnt, hdr_offset,
- (const char *) data_itr + 2 - _data,
- (const char *) data_top - _data);
- return -EINVAL;
- }
- hdr->next = NULL;
- hdr->address = le32_to_cpu(*data_itr++);
- hdr->length = le32_to_cpu(*data_itr++);
- hdr->bin = data_itr;
- if (hdr->length > remaining_size) {
- dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in data; "
- "chunk too long (%zu bytes), only %zu left\n",
- hdr_cnt, hdr_offset, hdr->length, remaining_size);
- return -EINVAL;
- }
- return 0;
-}
-
-
-/**
- * Get a buffer where the firmware is supposed to be and create a
- * chain of headers linking them together.
- *
- * @phdr: where to place the pointer to the first header (headers link
- * to the next via the @hdr->next ptr); need to free the whole
- * chain when done.
- *
- * @_data: Pointer to the data buffer.
- *
- * @_data_size: Size of the data buffer (bytes); data size has to be a
- * multiple of 4. Function will fail if not.
- *
- * Goes over the whole binary blob; reads the first chunk and creates
- * a fw hdr from it (which points to where the data is in @_data and
- * the length of the chunk); then goes on to the next chunk until
- * done. Each header is linked to the next.
- */
-static
-int fw_hdrs_load(struct i1480 *i1480, struct fw_hdr **phdr,
- const char *_data, size_t data_size)
-{
- int result;
- unsigned hdr_cnt = 0;
- u32 *data = (u32 *) _data, *data_itr, *data_top;
- struct fw_hdr *hdr, **prev_hdr = phdr;
-
- result = -EINVAL;
- /* Check size is ok and pointer is aligned */
- if (data_size % sizeof(u32) != 0)
- goto error;
- if ((unsigned long) _data % sizeof(u16) != 0)
- goto error;
- *phdr = NULL;
- data_itr = data;
- data_top = (u32 *) (_data + data_size);
- while (data_itr < data_top) {
- result = -ENOMEM;
- hdr = kmalloc(sizeof(*hdr), GFP_KERNEL);
- if (hdr == NULL) {
- dev_err(i1480->dev, "Cannot allocate fw header "
- "for chunk #%u\n", hdr_cnt);
- goto error_alloc;
- }
- result = fw_hdr_load(i1480, hdr, hdr_cnt,
- _data, data_itr, data_top);
- if (result < 0)
- goto error_load;
- data_itr += 2 + hdr->length;
- *prev_hdr = hdr;
- prev_hdr = &hdr->next;
- hdr_cnt++;
- };
- *prev_hdr = NULL;
- return 0;
-
-error_load:
- kfree(hdr);
-error_alloc:
- fw_hdrs_free(*phdr);
-error:
- return result;
-}
-
-
-/**
- * Compares a chunk of fw with one in the devices's memory
- *
- * @i1480: Device instance
- * @hdr: Pointer to the firmware chunk
- * @returns: 0 if equal, < 0 errno on error. If > 0, it is the offset
- * where the difference was found (plus one).
- *
- * Kind of dirty and simplistic, but does the trick in both the PCI
- * and USB version. We do a quick[er] memcmp(), and if it fails, we do
- * a byte-by-byte to find the offset.
- */
-static
-ssize_t i1480_fw_cmp(struct i1480 *i1480, struct fw_hdr *hdr)
-{
- ssize_t result = 0;
- u32 src_itr = 0, cnt;
- size_t size = hdr->length*sizeof(hdr->bin[0]);
- size_t chunk_size;
- u8 *bin = (u8 *) hdr->bin;
-
- while (size > 0) {
- chunk_size = size < i1480->buf_size ? size : i1480->buf_size;
- result = i1480->read(i1480, hdr->address + src_itr, chunk_size);
- if (result < 0) {
- dev_err(i1480->dev, "error reading for verification: "
- "%zd\n", result);
- goto error;
- }
- if (memcmp(i1480->cmd_buf, bin + src_itr, result)) {
- u8 *buf = i1480->cmd_buf;
- for (cnt = 0; cnt < result; cnt++)
- if (bin[src_itr + cnt] != buf[cnt]) {
- dev_err(i1480->dev, "byte failed at "
- "src_itr %u cnt %u [0x%02x "
- "vs 0x%02x]\n", src_itr, cnt,
- bin[src_itr + cnt], buf[cnt]);
- result = src_itr + cnt + 1;
- goto cmp_failed;
- }
- }
- src_itr += result;
- size -= result;
- }
- result = 0;
-error:
-cmp_failed:
- return result;
-}
-
-
-/**
- * Writes firmware headers to the device.
- *
- * @prd: PRD instance
- * @hdr: Processed firmware
- * @returns: 0 if ok, < 0 errno on error.
- */
-static
-int mac_fw_hdrs_push(struct i1480 *i1480, struct fw_hdr *hdr,
- const char *fw_name, const char *fw_tag)
-{
- struct device *dev = i1480->dev;
- ssize_t result = 0;
- struct fw_hdr *hdr_itr;
- int verif_retry_count;
-
- /* Now, header by header, push them to the hw */
- for (hdr_itr = hdr; hdr_itr != NULL; hdr_itr = hdr_itr->next) {
- verif_retry_count = 0;
-retry:
- dev_dbg(dev, "fw chunk (%zu @ 0x%08lx)\n",
- hdr_itr->length * sizeof(hdr_itr->bin[0]),
- hdr_itr->address);
- result = i1480->write(i1480, hdr_itr->address, hdr_itr->bin,
- hdr_itr->length*sizeof(hdr_itr->bin[0]));
- if (result < 0) {
- dev_err(dev, "%s fw '%s': write failed (%zuB @ 0x%lx):"
- " %zd\n", fw_tag, fw_name,
- hdr_itr->length * sizeof(hdr_itr->bin[0]),
- hdr_itr->address, result);
- break;
- }
- result = i1480_fw_cmp(i1480, hdr_itr);
- if (result < 0) {
- dev_err(dev, "%s fw '%s': verification read "
- "failed (%zuB @ 0x%lx): %zd\n",
- fw_tag, fw_name,
- hdr_itr->length * sizeof(hdr_itr->bin[0]),
- hdr_itr->address, result);
- break;
- }
- if (result > 0) { /* Offset where it failed + 1 */
- result--;
- dev_err(dev, "%s fw '%s': WARNING: verification "
- "failed at 0x%lx: retrying\n",
- fw_tag, fw_name, hdr_itr->address + result);
- if (++verif_retry_count < 3)
- goto retry; /* write this block again! */
- dev_err(dev, "%s fw '%s': verification failed at 0x%lx: "
- "tried %d times\n", fw_tag, fw_name,
- hdr_itr->address + result, verif_retry_count);
- result = -EINVAL;
- break;
- }
- }
- return result;
-}
-
-
-/** Puts the device in firmware upload mode.*/
-static
-int mac_fw_upload_enable(struct i1480 *i1480)
-{
- int result;
- u32 reg = 0x800000c0;
- u32 *buffer = (u32 *)i1480->cmd_buf;
-
- if (i1480->hw_rev > 1)
- reg = 0x8000d0d4;
- result = i1480->read(i1480, reg, sizeof(u32));
- if (result < 0)
- goto error_cmd;
- *buffer &= ~i1480_FW_UPLOAD_MODE_MASK;
- result = i1480->write(i1480, reg, buffer, sizeof(u32));
- if (result < 0)
- goto error_cmd;
- return 0;
-error_cmd:
- dev_err(i1480->dev, "can't enable fw upload mode: %d\n", result);
- return result;
-}
-
-
-/** Gets the device out of firmware upload mode. */
-static
-int mac_fw_upload_disable(struct i1480 *i1480)
-{
- int result;
- u32 reg = 0x800000c0;
- u32 *buffer = (u32 *)i1480->cmd_buf;
-
- if (i1480->hw_rev > 1)
- reg = 0x8000d0d4;
- result = i1480->read(i1480, reg, sizeof(u32));
- if (result < 0)
- goto error_cmd;
- *buffer |= i1480_FW_UPLOAD_MODE_MASK;
- result = i1480->write(i1480, reg, buffer, sizeof(u32));
- if (result < 0)
- goto error_cmd;
- return 0;
-error_cmd:
- dev_err(i1480->dev, "can't disable fw upload mode: %d\n", result);
- return result;
-}
-
-
-
-/**
- * Generic function for uploading a MAC firmware.
- *
- * @i1480: Device instance
- * @fw_name: Name of firmware file to upload.
- * @fw_tag: Name of the firmware type (for messages)
- * [eg: MAC, PRE]
- * @do_wait: Wait for device to emit initialization done message (0
- * for PRE fws, 1 for MAC fws).
- * @returns: 0 if ok, < 0 errno on error.
- */
-static
-int __mac_fw_upload(struct i1480 *i1480, const char *fw_name,
- const char *fw_tag)
-{
- int result;
- const struct firmware *fw;
- struct fw_hdr *fw_hdrs;
-
- result = request_firmware(&fw, fw_name, i1480->dev);
- if (result < 0) /* Up to caller to complain on -ENOENT */
- goto out;
- result = fw_hdrs_load(i1480, &fw_hdrs, fw->data, fw->size);
- if (result < 0) {
- dev_err(i1480->dev, "%s fw '%s': failed to parse firmware "
- "file: %d\n", fw_tag, fw_name, result);
- goto out_release;
- }
- result = mac_fw_upload_enable(i1480);
- if (result < 0)
- goto out_hdrs_release;
- result = mac_fw_hdrs_push(i1480, fw_hdrs, fw_name, fw_tag);
- mac_fw_upload_disable(i1480);
-out_hdrs_release:
- if (result >= 0)
- dev_info(i1480->dev, "%s fw '%s': uploaded\n", fw_tag, fw_name);
- else
- dev_err(i1480->dev, "%s fw '%s': failed to upload (%d), "
- "power cycle device\n", fw_tag, fw_name, result);
- fw_hdrs_free(fw_hdrs);
-out_release:
- release_firmware(fw);
-out:
- return result;
-}
-
-
-/**
- * Upload a pre-PHY firmware
- *
- */
-int i1480_pre_fw_upload(struct i1480 *i1480)
-{
- int result;
- result = __mac_fw_upload(i1480, i1480->pre_fw_name, "PRE");
- if (result == 0)
- msleep(400);
- return result;
-}
-
-
-/**
- * Reset a the MAC and PHY
- *
- * @i1480: Device's instance
- * @returns: 0 if ok, < 0 errno code on error
- *
- * We put the command on kmalloc'ed memory as some arches cannot do
- * USB from the stack. The reply event is copied from an stage buffer,
- * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
- *
- * We issue the reset to make sure the UWB controller reinits the PHY;
- * this way we can now if the PHY init went ok.
- */
-static
-int i1480_cmd_reset(struct i1480 *i1480)
-{
- int result;
- struct uwb_rccb *cmd = (void *) i1480->cmd_buf;
- struct i1480_evt_reset {
- struct uwb_rceb rceb;
- u8 bResultCode;
- } __attribute__((packed)) *reply = (void *) i1480->evt_buf;
-
- result = -ENOMEM;
- cmd->bCommandType = UWB_RC_CET_GENERAL;
- cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET);
- reply->rceb.bEventType = UWB_RC_CET_GENERAL;
- reply->rceb.wEvent = UWB_RC_CMD_RESET;
- result = i1480_cmd(i1480, "RESET", sizeof(*cmd), sizeof(*reply));
- if (result < 0)
- goto out;
- if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
- dev_err(i1480->dev, "RESET: command execution failed: %u\n",
- reply->bResultCode);
- result = -EIO;
- }
-out:
- return result;
-
-}
-
-
-/* Wait for the MAC FW to start running */
-static
-int i1480_fw_is_running_q(struct i1480 *i1480)
-{
- int cnt = 0;
- int result;
- u32 *val = (u32 *) i1480->cmd_buf;
-
- for (cnt = 0; cnt < 10; cnt++) {
- msleep(100);
- result = i1480->read(i1480, 0x80080000, 4);
- if (result < 0) {
- dev_err(i1480->dev, "Can't read 0x8008000: %d\n", result);
- goto out;
- }
- if (*val == 0x55555555UL) /* fw running? cool */
- goto out;
- }
- dev_err(i1480->dev, "Timed out waiting for fw to start\n");
- result = -ETIMEDOUT;
-out:
- return result;
-
-}
-
-
-/**
- * Upload MAC firmware, wait for it to start
- *
- * @i1480: Device instance
- * @fw_name: Name of the file that contains the firmware
- *
- * This has to be called after the pre fw has been uploaded (if
- * there is any).
- */
-int i1480_mac_fw_upload(struct i1480 *i1480)
-{
- int result = 0, deprecated_name = 0;
- struct i1480_rceb *rcebe = (void *) i1480->evt_buf;
-
- result = __mac_fw_upload(i1480, i1480->mac_fw_name, "MAC");
- if (result == -ENOENT) {
- result = __mac_fw_upload(i1480, i1480->mac_fw_name_deprecate,
- "MAC");
- deprecated_name = 1;
- }
- if (result < 0)
- return result;
- if (deprecated_name == 1)
- dev_warn(i1480->dev,
- "WARNING: firmware file name %s is deprecated, "
- "please rename to %s\n",
- i1480->mac_fw_name_deprecate, i1480->mac_fw_name);
- result = i1480_fw_is_running_q(i1480);
- if (result < 0)
- goto error_fw_not_running;
- result = i1480->rc_setup ? i1480->rc_setup(i1480) : 0;
- if (result < 0) {
- dev_err(i1480->dev, "Cannot setup after MAC fw upload: %d\n",
- result);
- goto error_setup;
- }
- result = i1480->wait_init_done(i1480); /* wait init'on */
- if (result < 0) {
- dev_err(i1480->dev, "MAC fw '%s': Initialization timed out "
- "(%d)\n", i1480->mac_fw_name, result);
- goto error_init_timeout;
- }
- /* verify we got the right initialization done event */
- if (i1480->evt_result != sizeof(*rcebe)) {
- dev_err(i1480->dev, "MAC fw '%s': initialization event returns "
- "wrong size (%zu bytes vs %zu needed)\n",
- i1480->mac_fw_name, i1480->evt_result, sizeof(*rcebe));
- goto error_size;
- }
- result = -EIO;
- if (i1480_rceb_check(i1480, &rcebe->rceb, NULL, 0, i1480_CET_VS1,
- i1480_EVT_RM_INIT_DONE) < 0) {
- dev_err(i1480->dev, "wrong initialization event 0x%02x/%04x/%02x "
- "received; expected 0x%02x/%04x/00\n",
- rcebe->rceb.bEventType, le16_to_cpu(rcebe->rceb.wEvent),
- rcebe->rceb.bEventContext, i1480_CET_VS1,
- i1480_EVT_RM_INIT_DONE);
- goto error_init_timeout;
- }
- result = i1480_cmd_reset(i1480);
- if (result < 0)
- dev_err(i1480->dev, "MAC fw '%s': MBOA reset failed (%d)\n",
- i1480->mac_fw_name, result);
-error_fw_not_running:
-error_init_timeout:
-error_size:
-error_setup:
- return result;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Wireless UWB Link 1480
- * PHY parameters upload
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * Code for uploading the PHY parameters to the PHY through the UWB
- * Radio Control interface.
- *
- * We just send the data through the MPI interface using HWA-like
- * commands and then reset the PHY to make sure it is ok.
- */
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include "../../../wusbcore/include/wusb.h"
-#include "i1480-dfu.h"
-
-
-/**
- * Write a value array to an address of the MPI interface
- *
- * @i1480: Device descriptor
- * @data: Data array to write
- * @size: Size of the data array
- * @returns: 0 if ok, < 0 errno code on error.
- *
- * The data array is organized into pairs:
- *
- * ADDRESS VALUE
- *
- * ADDRESS is BE 16 bit unsigned, VALUE 8 bit unsigned. Size thus has
- * to be a multiple of three.
- */
-static
-int i1480_mpi_write(struct i1480 *i1480, const void *data, size_t size)
-{
- int result;
- struct i1480_cmd_mpi_write *cmd = i1480->cmd_buf;
- struct i1480_evt_confirm *reply = i1480->evt_buf;
-
- BUG_ON(size > 480);
- result = -ENOMEM;
- cmd->rccb.bCommandType = i1480_CET_VS1;
- cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_WRITE);
- cmd->size = cpu_to_le16(size);
- memcpy(cmd->data, data, size);
- reply->rceb.bEventType = i1480_CET_VS1;
- reply->rceb.wEvent = i1480_CMD_MPI_WRITE;
- result = i1480_cmd(i1480, "MPI-WRITE", sizeof(*cmd) + size, sizeof(*reply));
- if (result < 0)
- goto out;
- if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
- dev_err(i1480->dev, "MPI-WRITE: command execution failed: %d\n",
- reply->bResultCode);
- result = -EIO;
- }
-out:
- return result;
-}
-
-
-/**
- * Read a value array to from an address of the MPI interface
- *
- * @i1480: Device descriptor
- * @data: where to place the read array
- * @srcaddr: Where to read from
- * @size: Size of the data read array
- * @returns: 0 if ok, < 0 errno code on error.
- *
- * The command data array is organized into pairs ADDR0 ADDR1..., and
- * the returned data in ADDR0 VALUE0 ADDR1 VALUE1...
- *
- * We generate the command array to be a sequential read and then
- * rearrange the result.
- *
- * We use the i1480->cmd_buf for the command, i1480->evt_buf for the reply.
- *
- * As the reply has to fit in 512 bytes (i1480->evt_buffer), the max amount
- * of values we can read is (512 - sizeof(*reply)) / 3
- */
-static
-int i1480_mpi_read(struct i1480 *i1480, u8 *data, u16 srcaddr, size_t size)
-{
- int result;
- struct i1480_cmd_mpi_read *cmd = i1480->cmd_buf;
- struct i1480_evt_mpi_read *reply = i1480->evt_buf;
- unsigned cnt;
-
- memset(i1480->cmd_buf, 0x69, 512);
- memset(i1480->evt_buf, 0x69, 512);
-
- BUG_ON(size > (i1480->buf_size - sizeof(*reply)) / 3);
- result = -ENOMEM;
- cmd->rccb.bCommandType = i1480_CET_VS1;
- cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_READ);
- cmd->size = cpu_to_le16(3*size);
- for (cnt = 0; cnt < size; cnt++) {
- cmd->data[cnt].page = (srcaddr + cnt) >> 8;
- cmd->data[cnt].offset = (srcaddr + cnt) & 0xff;
- }
- reply->rceb.bEventType = i1480_CET_VS1;
- reply->rceb.wEvent = i1480_CMD_MPI_READ;
- result = i1480_cmd(i1480, "MPI-READ", sizeof(*cmd) + 2*size,
- sizeof(*reply) + 3*size);
- if (result < 0)
- goto out;
- if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
- dev_err(i1480->dev, "MPI-READ: command execution failed: %d\n",
- reply->bResultCode);
- result = -EIO;
- goto out;
- }
- for (cnt = 0; cnt < size; cnt++) {
- if (reply->data[cnt].page != (srcaddr + cnt) >> 8)
- dev_err(i1480->dev, "MPI-READ: page inconsistency at "
- "index %u: expected 0x%02x, got 0x%02x\n", cnt,
- (srcaddr + cnt) >> 8, reply->data[cnt].page);
- if (reply->data[cnt].offset != ((srcaddr + cnt) & 0x00ff))
- dev_err(i1480->dev, "MPI-READ: offset inconsistency at "
- "index %u: expected 0x%02x, got 0x%02x\n", cnt,
- (srcaddr + cnt) & 0x00ff,
- reply->data[cnt].offset);
- data[cnt] = reply->data[cnt].value;
- }
- result = 0;
-out:
- return result;
-}
-
-
-/**
- * Upload a PHY firmware, wait for it to start
- *
- * @i1480: Device instance
- * @fw_name: Name of the file that contains the firmware
- *
- * We assume the MAC fw is up and running. This means we can use the
- * MPI interface to write the PHY firmware. Once done, we issue an
- * MBOA Reset, which will force the MAC to reset and reinitialize the
- * PHY. If that works, we are ready to go.
- *
- * Max packet size for the MPI write is 512, so the max buffer is 480
- * (which gives us 160 byte triads of MSB, LSB and VAL for the data).
- */
-int i1480_phy_fw_upload(struct i1480 *i1480)
-{
- int result;
- const struct firmware *fw;
- const char *data_itr, *data_top;
- const size_t MAX_BLK_SIZE = 480; /* 160 triads */
- size_t data_size;
- u8 phy_stat;
-
- result = request_firmware(&fw, i1480->phy_fw_name, i1480->dev);
- if (result < 0)
- goto out;
- /* Loop writing data in chunks as big as possible until done. */
- for (data_itr = fw->data, data_top = data_itr + fw->size;
- data_itr < data_top; data_itr += MAX_BLK_SIZE) {
- data_size = min(MAX_BLK_SIZE, (size_t) (data_top - data_itr));
- result = i1480_mpi_write(i1480, data_itr, data_size);
- if (result < 0)
- goto error_mpi_write;
- }
- /* Read MPI page 0, offset 6; if 0, PHY was initialized correctly. */
- result = i1480_mpi_read(i1480, &phy_stat, 0x0006, 1);
- if (result < 0) {
- dev_err(i1480->dev, "PHY: can't get status: %d\n", result);
- goto error_mpi_status;
- }
- if (phy_stat != 0) {
- result = -ENODEV;
- dev_info(i1480->dev, "error, PHY not ready: %u\n", phy_stat);
- goto error_phy_status;
- }
- dev_info(i1480->dev, "PHY fw '%s': uploaded\n", i1480->phy_fw_name);
-error_phy_status:
-error_mpi_status:
-error_mpi_write:
- release_firmware(fw);
- if (result < 0)
- dev_err(i1480->dev, "PHY fw '%s': failed to upload (%d), "
- "power cycle device\n", i1480->phy_fw_name, result);
-out:
- return result;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Wireless UWB Link 1480
- * USB SKU firmware upload implementation
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This driver will prepare the i1480 device to behave as a real
- * Wireless USB HWA adaptor by uploading the firmware.
- *
- * When the device is connected or driver is loaded, i1480_usb_probe()
- * is called--this will allocate and initialize the device structure,
- * fill in the pointers to the common functions (read, write,
- * wait_init_done and cmd for HWA command execution) and once that is
- * done, call the common firmware uploading routine. Then clean up and
- * return -ENODEV, as we don't attach to the device.
- *
- * The rest are the basic ops we implement that the fw upload code
- * uses to do its job. All the ops in the common code are i1480->NAME,
- * the functions are i1480_usb_NAME().
- */
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include "../../uwb.h"
-#include "../../../wusbcore/include/wusb.h"
-#include "../../../wusbcore/include/wusb-wa.h"
-#include "i1480-dfu.h"
-
-struct i1480_usb {
- struct i1480 i1480;
- struct usb_device *usb_dev;
- struct usb_interface *usb_iface;
- struct urb *neep_urb; /* URB for reading from EP1 */
-};
-
-
-static
-void i1480_usb_init(struct i1480_usb *i1480_usb)
-{
- i1480_init(&i1480_usb->i1480);
-}
-
-
-static
-int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface)
-{
- struct usb_device *usb_dev = interface_to_usbdev(iface);
- int result = -ENOMEM;
-
- i1480_usb->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */
- i1480_usb->usb_iface = usb_get_intf(iface);
- usb_set_intfdata(iface, i1480_usb); /* Bind the driver to iface0 */
- i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (i1480_usb->neep_urb == NULL)
- goto error;
- return 0;
-
-error:
- usb_set_intfdata(iface, NULL);
- usb_put_intf(iface);
- usb_put_dev(usb_dev);
- return result;
-}
-
-
-static
-void i1480_usb_destroy(struct i1480_usb *i1480_usb)
-{
- usb_kill_urb(i1480_usb->neep_urb);
- usb_free_urb(i1480_usb->neep_urb);
- usb_set_intfdata(i1480_usb->usb_iface, NULL);
- usb_put_intf(i1480_usb->usb_iface);
- usb_put_dev(i1480_usb->usb_dev);
-}
-
-
-/**
- * Write a buffer to a memory address in the i1480 device
- *
- * @i1480: i1480 instance
- * @memory_address:
- * Address where to write the data buffer to.
- * @buffer: Buffer to the data
- * @size: Size of the buffer [has to be < 512].
- * @returns: 0 if ok, < 0 errno code on error.
- *
- * Data buffers to USB cannot be on the stack or in vmalloc'ed areas,
- * so we copy it to the local i1480 buffer before proceeding. In any
- * case, we have a max size we can send.
- */
-static
-int i1480_usb_write(struct i1480 *i1480, u32 memory_address,
- const void *buffer, size_t size)
-{
- int result = 0;
- struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
- size_t buffer_size, itr = 0;
-
- BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
- while (size > 0) {
- buffer_size = size < i1480->buf_size ? size : i1480->buf_size;
- memcpy(i1480->cmd_buf, buffer + itr, buffer_size);
- result = usb_control_msg(
- i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
- 0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- memory_address, (memory_address >> 16),
- i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */);
- if (result < 0)
- break;
- itr += result;
- memory_address += result;
- size -= result;
- }
- return result;
-}
-
-
-/**
- * Read a block [max size 512] of the device's memory to @i1480's buffer.
- *
- * @i1480: i1480 instance
- * @memory_address:
- * Address where to read from.
- * @size: Size to read. Smaller than or equal to 512.
- * @returns: >= 0 number of bytes written if ok, < 0 errno code on error.
- *
- * NOTE: if the memory address or block is incorrect, you might get a
- * stall or a different memory read. Caller has to verify the
- * memory address and size passed back in the @neh structure.
- */
-static
-int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size)
-{
- ssize_t result = 0, bytes = 0;
- size_t itr, read_size = i1480->buf_size;
- struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
-
- BUG_ON(size > i1480->buf_size);
- BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
- BUG_ON(read_size > 512);
-
- if (addr >= 0x8000d200 && addr < 0x8000d400) /* Yeah, HW quirk */
- read_size = 4;
-
- for (itr = 0; itr < size; itr += read_size) {
- size_t itr_addr = addr + itr;
- size_t itr_size = min(read_size, size - itr);
- result = usb_control_msg(
- i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0),
- 0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- itr_addr, (itr_addr >> 16),
- i1480->cmd_buf + itr, itr_size,
- 100 /* FIXME: arbitrary */);
- if (result < 0) {
- dev_err(i1480->dev, "%s: USB read error: %zd\n",
- __func__, result);
- goto out;
- }
- if (result != itr_size) {
- result = -EIO;
- dev_err(i1480->dev,
- "%s: partial read got only %zu bytes vs %zu expected\n",
- __func__, result, itr_size);
- goto out;
- }
- bytes += result;
- }
- result = bytes;
-out:
- return result;
-}
-
-
-/**
- * Callback for reads on the notification/event endpoint
- *
- * Just enables the completion read handler.
- */
-static
-void i1480_usb_neep_cb(struct urb *urb)
-{
- struct i1480 *i1480 = urb->context;
- struct device *dev = i1480->dev;
-
- switch (urb->status) {
- case 0:
- break;
- case -ECONNRESET: /* Not an error, but a controlled situation; */
- case -ENOENT: /* (we killed the URB)...so, no broadcast */
- dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status);
- break;
- case -ESHUTDOWN: /* going away! */
- dev_dbg(dev, "NEEP: down %d\n", urb->status);
- break;
- default:
- dev_err(dev, "NEEP: unknown status %d\n", urb->status);
- break;
- }
- i1480->evt_result = urb->actual_length;
- complete(&i1480->evt_complete);
- return;
-}
-
-
-/**
- * Wait for the MAC FW to initialize
- *
- * MAC FW sends a 0xfd/0101/00 notification to EP1 when done
- * initializing. Get that notification into i1480->evt_buf; upper layer
- * will verify it.
- *
- * Set i1480->evt_result with the result of getting the event or its
- * size (if successful).
- *
- * Delivers the data directly to i1480->evt_buf
- */
-static
-int i1480_usb_wait_init_done(struct i1480 *i1480)
-{
- int result;
- struct device *dev = i1480->dev;
- struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
- struct usb_endpoint_descriptor *epd;
-
- init_completion(&i1480->evt_complete);
- i1480->evt_result = -EINPROGRESS;
- epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
- usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev,
- usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
- i1480->evt_buf, i1480->buf_size,
- i1480_usb_neep_cb, i1480, epd->bInterval);
- result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
- if (result < 0) {
- dev_err(dev, "init done: cannot submit NEEP read: %d\n",
- result);
- goto error_submit;
- }
- /* Wait for the USB callback to get the data */
- result = wait_for_completion_interruptible_timeout(
- &i1480->evt_complete, HZ);
- if (result <= 0) {
- result = result == 0 ? -ETIMEDOUT : result;
- goto error_wait;
- }
- usb_kill_urb(i1480_usb->neep_urb);
- return 0;
-
-error_wait:
- usb_kill_urb(i1480_usb->neep_urb);
-error_submit:
- i1480->evt_result = result;
- return result;
-}
-
-
-/**
- * Generic function for issuing commands to the i1480
- *
- * @i1480: i1480 instance
- * @cmd_name: Name of the command (for error messages)
- * @cmd: Pointer to command buffer
- * @cmd_size: Size of the command buffer
- * @reply: Buffer for the reply event
- * @reply_size: Expected size back (including RCEB); the reply buffer
- * is assumed to be as big as this.
- * @returns: >= 0 size of the returned event data if ok,
- * < 0 errno code on error.
- *
- * Arms the NE handle, issues the command to the device and checks the
- * basics of the reply event.
- */
-static
-int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size)
-{
- int result;
- struct device *dev = i1480->dev;
- struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
- struct usb_endpoint_descriptor *epd;
- struct uwb_rccb *cmd = i1480->cmd_buf;
- u8 iface_no;
-
- /* Post a read on the notification & event endpoint */
- iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber;
- epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
- usb_fill_int_urb(
- i1480_usb->neep_urb, i1480_usb->usb_dev,
- usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
- i1480->evt_buf, i1480->buf_size,
- i1480_usb_neep_cb, i1480, epd->bInterval);
- result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
- if (result < 0) {
- dev_err(dev, "%s: cannot submit NEEP read: %d\n",
- cmd_name, result);
- goto error_submit_ep1;
- }
- /* Now post the command on EP0 */
- result = usb_control_msg(
- i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
- WA_EXEC_RC_CMD,
- USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
- 0, iface_no,
- cmd, cmd_size,
- 100 /* FIXME: this is totally arbitrary */);
- if (result < 0) {
- dev_err(dev, "%s: control request failed: %d\n",
- cmd_name, result);
- goto error_submit_ep0;
- }
- return result;
-
-error_submit_ep0:
- usb_kill_urb(i1480_usb->neep_urb);
-error_submit_ep1:
- return result;
-}
-
-
-/*
- * Probe a i1480 device for uploading firmware.
- *
- * We attach only to interface #0, which is the radio control interface.
- */
-static
-int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
-{
- struct usb_device *udev = interface_to_usbdev(iface);
- struct i1480_usb *i1480_usb;
- struct i1480 *i1480;
- struct device *dev = &iface->dev;
- int result;
-
- result = -ENODEV;
- if (iface->cur_altsetting->desc.bInterfaceNumber != 0) {
- dev_dbg(dev, "not attaching to iface %d\n",
- iface->cur_altsetting->desc.bInterfaceNumber);
- goto error;
- }
- if (iface->num_altsetting > 1 &&
- le16_to_cpu(udev->descriptor.idProduct) == 0xbabe) {
- /* Need altsetting #1 [HW QUIRK] or EP1 won't work */
- result = usb_set_interface(interface_to_usbdev(iface), 0, 1);
- if (result < 0)
- dev_warn(dev,
- "can't set altsetting 1 on iface 0: %d\n",
- result);
- }
-
- if (iface->cur_altsetting->desc.bNumEndpoints < 1)
- return -ENODEV;
-
- result = -ENOMEM;
- i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL);
- if (i1480_usb == NULL) {
- dev_err(dev, "Unable to allocate instance\n");
- goto error;
- }
- i1480_usb_init(i1480_usb);
-
- i1480 = &i1480_usb->i1480;
- i1480->buf_size = 512;
- i1480->cmd_buf = kmalloc_array(2, i1480->buf_size, GFP_KERNEL);
- if (i1480->cmd_buf == NULL) {
- dev_err(dev, "Cannot allocate transfer buffers\n");
- result = -ENOMEM;
- goto error_buf_alloc;
- }
- i1480->evt_buf = i1480->cmd_buf + i1480->buf_size;
-
- result = i1480_usb_create(i1480_usb, iface);
- if (result < 0) {
- dev_err(dev, "Cannot create instance: %d\n", result);
- goto error_create;
- }
-
- /* setup the fops and upload the firmware */
- i1480->pre_fw_name = "i1480-pre-phy-0.0.bin";
- i1480->mac_fw_name = "i1480-usb-0.0.bin";
- i1480->mac_fw_name_deprecate = "ptc-0.0.bin";
- i1480->phy_fw_name = "i1480-phy-0.0.bin";
- i1480->dev = &iface->dev;
- i1480->write = i1480_usb_write;
- i1480->read = i1480_usb_read;
- i1480->rc_setup = NULL;
- i1480->wait_init_done = i1480_usb_wait_init_done;
- i1480->cmd = i1480_usb_cmd;
-
- result = i1480_fw_upload(&i1480_usb->i1480); /* the real thing */
- if (result >= 0) {
- usb_reset_device(i1480_usb->usb_dev);
- result = -ENODEV; /* we don't want to bind to the iface */
- }
- i1480_usb_destroy(i1480_usb);
-error_create:
- kfree(i1480->cmd_buf);
-error_buf_alloc:
- kfree(i1480_usb);
-error:
- return result;
-}
-
-MODULE_FIRMWARE("i1480-pre-phy-0.0.bin");
-MODULE_FIRMWARE("i1480-usb-0.0.bin");
-MODULE_FIRMWARE("i1480-phy-0.0.bin");
-
-#define i1480_USB_DEV(v, p) \
-{ \
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE \
- | USB_DEVICE_ID_MATCH_DEV_INFO \
- | USB_DEVICE_ID_MATCH_INT_INFO, \
- .idVendor = (v), \
- .idProduct = (p), \
- .bDeviceClass = 0xff, \
- .bDeviceSubClass = 0xff, \
- .bDeviceProtocol = 0xff, \
- .bInterfaceClass = 0xff, \
- .bInterfaceSubClass = 0xff, \
- .bInterfaceProtocol = 0xff, \
-}
-
-
-/** USB device ID's that we handle */
-static const struct usb_device_id i1480_usb_id_table[] = {
- i1480_USB_DEV(0x8086, 0xdf3b),
- i1480_USB_DEV(0x15a9, 0x0005),
- i1480_USB_DEV(0x07d1, 0x3802),
- i1480_USB_DEV(0x050d, 0x305a),
- i1480_USB_DEV(0x3495, 0x3007),
- {},
-};
-MODULE_DEVICE_TABLE(usb, i1480_usb_id_table);
-
-
-static struct usb_driver i1480_dfu_driver = {
- .name = "i1480-dfu-usb",
- .id_table = i1480_usb_id_table,
- .probe = i1480_usb_probe,
- .disconnect = NULL,
-};
-
-module_usb_driver(i1480_dfu_driver);
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB");
-MODULE_LICENSE("GPL");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Wireless UWB Link 1480
- * Event Size tables for Wired Adaptors
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include "../uwb.h"
-#include "dfu/i1480-dfu.h"
-
-
-/** Event size table for wEvents 0x00XX */
-static struct uwb_est_entry i1480_est_fd00[] = {
- /* Anybody expecting this response has to use
- * neh->extra_size to specify the real size that will
- * come back. */
- [i1480_EVT_CONFIRM] = { .size = sizeof(struct i1480_evt_confirm) },
- [i1480_CMD_SET_IP_MAS] = { .size = sizeof(struct i1480_evt_confirm) },
-#ifdef i1480_RCEB_EXTENDED
- [0x09] = {
- .size = sizeof(struct i1480_rceb),
- .offset = 1 + offsetof(struct i1480_rceb, wParamLength),
- },
-#endif
-};
-
-/** Event size table for wEvents 0x01XX */
-static struct uwb_est_entry i1480_est_fd01[] = {
- [0xff & i1480_EVT_RM_INIT_DONE] = { .size = sizeof(struct i1480_rceb) },
- [0xff & i1480_EVT_DEV_ADD] = { .size = sizeof(struct i1480_rceb) + 9 },
- [0xff & i1480_EVT_DEV_RM] = { .size = sizeof(struct i1480_rceb) + 9 },
- [0xff & i1480_EVT_DEV_ID_CHANGE] = {
- .size = sizeof(struct i1480_rceb) + 2 },
-};
-
-static int __init i1480_est_init(void)
-{
- int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
- i1480_est_fd00,
- ARRAY_SIZE(i1480_est_fd00));
- if (result < 0) {
- printk(KERN_ERR "Can't register EST table fd00: %d\n", result);
- return result;
- }
- result = uwb_est_register(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b,
- i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01));
- if (result < 0) {
- printk(KERN_ERR "Can't register EST table fd01: %d\n", result);
- return result;
- }
- return 0;
-}
-module_init(i1480_est_init);
-
-static void __exit i1480_est_exit(void)
-{
- uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b,
- i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00));
- uwb_est_unregister(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b,
- i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01));
-}
-module_exit(i1480_est_exit);
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("i1480's Vendor Specific Event Size Tables");
-MODULE_LICENSE("GPL");
-
-/**
- * USB device ID's that we handle
- *
- * [so we are loaded when this kind device is connected]
- */
-static struct usb_device_id __used i1480_est_id_table[] = {
- { USB_DEVICE(0x8086, 0xdf3b), },
- { USB_DEVICE(0x8086, 0x0c3b), },
- { },
-};
-MODULE_DEVICE_TABLE(usb, i1480_est_id_table);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * IE Received notification handling.
- *
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/bitmap.h>
-#include "uwb-internal.h"
-
-/*
- * Process an incoming IE Received notification.
- */
-int uwbd_evt_handle_rc_ie_rcv(struct uwb_event *evt)
-{
- int result = -EINVAL;
- struct device *dev = &evt->rc->uwb_dev.dev;
- struct uwb_rc_evt_ie_rcv *iercv;
-
- /* Is there enough data to decode it? */
- if (evt->notif.size < sizeof(*iercv)) {
- dev_err(dev, "IE Received notification: Not enough data to "
- "decode (%zu vs %zu bytes needed)\n",
- evt->notif.size, sizeof(*iercv));
- goto error;
- }
- iercv = container_of(evt->notif.rceb, struct uwb_rc_evt_ie_rcv, rceb);
-
- dev_dbg(dev, "IE received, element ID=%d\n", iercv->IEData[0]);
-
- if (iercv->IEData[0] == UWB_RELINQUISH_REQUEST_IE) {
- dev_warn(dev, "unhandled Relinquish Request IE\n");
- }
-
- return 0;
-error:
- return result;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * Information Element Handling
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * Reinette Chatre <reinette.chatre@intel.com>
- *
- * FIXME: docs
- */
-
-#include <linux/slab.h>
-#include <linux/export.h>
-#include "uwb-internal.h"
-
-/**
- * uwb_ie_next - get the next IE in a buffer
- * @ptr: start of the buffer containing the IE data
- * @len: length of the buffer
- *
- * Both @ptr and @len are updated so subsequent calls to uwb_ie_next()
- * will get the next IE.
- *
- * NULL is returned (and @ptr and @len will not be updated) if there
- * are no more IEs in the buffer or the buffer is too short.
- */
-struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len)
-{
- struct uwb_ie_hdr *hdr;
- size_t ie_len;
-
- if (*len < sizeof(struct uwb_ie_hdr))
- return NULL;
-
- hdr = *ptr;
- ie_len = sizeof(struct uwb_ie_hdr) + hdr->length;
-
- if (*len < ie_len)
- return NULL;
-
- *ptr += ie_len;
- *len -= ie_len;
-
- return hdr;
-}
-EXPORT_SYMBOL_GPL(uwb_ie_next);
-
-/**
- * uwb_ie_dump_hex - print IEs to a character buffer
- * @ies: the IEs to print.
- * @len: length of all the IEs.
- * @buf: the destination buffer.
- * @size: size of @buf.
- *
- * Returns the number of characters written.
- */
-int uwb_ie_dump_hex(const struct uwb_ie_hdr *ies, size_t len,
- char *buf, size_t size)
-{
- void *ptr;
- const struct uwb_ie_hdr *ie;
- int r = 0;
- u8 *d;
-
- ptr = (void *)ies;
- for (;;) {
- ie = uwb_ie_next(&ptr, &len);
- if (!ie)
- break;
-
- r += scnprintf(buf + r, size - r, "%02x %02x",
- (unsigned)ie->element_id,
- (unsigned)ie->length);
- d = (uint8_t *)ie + sizeof(struct uwb_ie_hdr);
- while (d != ptr && r < size)
- r += scnprintf(buf + r, size - r, " %02x", (unsigned)*d++);
- if (r < size)
- buf[r++] = '\n';
- };
-
- return r;
-}
-
-/**
- * Get the IEs that a radio controller is sending in its beacon
- *
- * @uwb_rc: UWB Radio Controller
- * @returns: Size read from the system
- *
- * We don't need to lock the uwb_rc's mutex because we don't modify
- * anything. Once done with the iedata buffer, call
- * uwb_rc_ie_release(iedata). Don't call kfree on it.
- */
-static
-ssize_t uwb_rc_get_ie(struct uwb_rc *uwb_rc, struct uwb_rc_evt_get_ie **pget_ie)
-{
- ssize_t result;
- struct device *dev = &uwb_rc->uwb_dev.dev;
- struct uwb_rccb *cmd = NULL;
- struct uwb_rceb *reply = NULL;
- struct uwb_rc_evt_get_ie *get_ie;
-
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- return -ENOMEM;
-
- cmd->bCommandType = UWB_RC_CET_GENERAL;
- cmd->wCommand = cpu_to_le16(UWB_RC_CMD_GET_IE);
- result = uwb_rc_vcmd(uwb_rc, "GET_IE", cmd, sizeof(*cmd),
- UWB_RC_CET_GENERAL, UWB_RC_CMD_GET_IE,
- &reply);
- kfree(cmd);
- if (result < 0)
- return result;
-
- get_ie = container_of(reply, struct uwb_rc_evt_get_ie, rceb);
- if (result < sizeof(*get_ie)) {
- dev_err(dev, "not enough data returned for decoding GET IE "
- "(%zu bytes received vs %zu needed)\n",
- result, sizeof(*get_ie));
- return -EINVAL;
- } else if (result < sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)) {
- dev_err(dev, "not enough data returned for decoding GET IE "
- "payload (%zu bytes received vs %zu needed)\n", result,
- sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength));
- return -EINVAL;
- }
-
- *pget_ie = get_ie;
- return result;
-}
-
-
-/**
- * Replace all IEs currently being transmitted by a device
- *
- * @cmd: pointer to the SET-IE command with the IEs to set
- * @size: size of @buf
- */
-int uwb_rc_set_ie(struct uwb_rc *rc, struct uwb_rc_cmd_set_ie *cmd)
-{
- int result;
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_rc_evt_set_ie reply;
-
- reply.rceb.bEventType = UWB_RC_CET_GENERAL;
- reply.rceb.wEvent = UWB_RC_CMD_SET_IE;
- result = uwb_rc_cmd(rc, "SET-IE", &cmd->rccb,
- sizeof(*cmd) + le16_to_cpu(cmd->wIELength),
- &reply.rceb, sizeof(reply));
- if (result < 0)
- goto error_cmd;
- else if (result != sizeof(reply)) {
- dev_err(dev, "SET-IE: not enough data to decode reply "
- "(%d bytes received vs %zu needed)\n",
- result, sizeof(reply));
- result = -EIO;
- } else if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
- dev_err(dev, "SET-IE: command execution failed: %s (%d)\n",
- uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
- result = -EIO;
- } else
- result = 0;
-error_cmd:
- return result;
-}
-
-/* Cleanup the whole IE management subsystem */
-void uwb_rc_ie_init(struct uwb_rc *uwb_rc)
-{
- mutex_init(&uwb_rc->ies_mutex);
-}
-
-
-/**
- * uwb_rc_ie_setup - setup a radio controller's IE manager
- * @uwb_rc: the radio controller.
- *
- * The current set of IEs are obtained from the hardware with a GET-IE
- * command (since the radio controller is not yet beaconing this will
- * be just the hardware's MAC and PHY Capability IEs).
- *
- * Returns 0 on success; -ve on an error.
- */
-int uwb_rc_ie_setup(struct uwb_rc *uwb_rc)
-{
- struct uwb_rc_evt_get_ie *ie_info = NULL;
- int capacity;
-
- capacity = uwb_rc_get_ie(uwb_rc, &ie_info);
- if (capacity < 0)
- return capacity;
-
- mutex_lock(&uwb_rc->ies_mutex);
-
- uwb_rc->ies = (struct uwb_rc_cmd_set_ie *)ie_info;
- uwb_rc->ies->rccb.bCommandType = UWB_RC_CET_GENERAL;
- uwb_rc->ies->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_IE);
- uwb_rc->ies_capacity = capacity;
-
- mutex_unlock(&uwb_rc->ies_mutex);
-
- return 0;
-}
-
-
-/* Cleanup the whole IE management subsystem */
-void uwb_rc_ie_release(struct uwb_rc *uwb_rc)
-{
- kfree(uwb_rc->ies);
- uwb_rc->ies = NULL;
- uwb_rc->ies_capacity = 0;
-}
-
-
-static int uwb_rc_ie_add_one(struct uwb_rc *rc, const struct uwb_ie_hdr *new_ie)
-{
- struct uwb_rc_cmd_set_ie *new_ies;
- void *ptr, *prev_ie;
- struct uwb_ie_hdr *ie;
- size_t length, new_ie_len, new_capacity, size, prev_size;
-
- length = le16_to_cpu(rc->ies->wIELength);
- new_ie_len = sizeof(struct uwb_ie_hdr) + new_ie->length;
- new_capacity = sizeof(struct uwb_rc_cmd_set_ie) + length + new_ie_len;
-
- if (new_capacity > rc->ies_capacity) {
- new_ies = krealloc(rc->ies, new_capacity, GFP_KERNEL);
- if (!new_ies)
- return -ENOMEM;
- rc->ies = new_ies;
- }
-
- ptr = rc->ies->IEData;
- size = length;
- for (;;) {
- prev_ie = ptr;
- prev_size = size;
- ie = uwb_ie_next(&ptr, &size);
- if (!ie || ie->element_id > new_ie->element_id)
- break;
- }
-
- memmove(prev_ie + new_ie_len, prev_ie, prev_size);
- memcpy(prev_ie, new_ie, new_ie_len);
- rc->ies->wIELength = cpu_to_le16(length + new_ie_len);
-
- return 0;
-}
-
-/**
- * uwb_rc_ie_add - add new IEs to the radio controller's beacon
- * @uwb_rc: the radio controller.
- * @ies: the buffer containing the new IE or IEs to be added to
- * the device's beacon.
- * @size: length of all the IEs.
- *
- * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB
- * after the device sent the first beacon that includes the IEs specified
- * in the SET IE command. We thus cannot send this command if the device is
- * not beaconing. Instead, a SET IE command will be sent later right after
- * we start beaconing.
- *
- * Setting an IE on the device will overwrite all current IEs in device. So
- * we take the current IEs being transmitted by the device, insert the
- * new one, and call SET IE with all the IEs needed.
- *
- * Returns 0 on success; or -ENOMEM.
- */
-int uwb_rc_ie_add(struct uwb_rc *uwb_rc,
- const struct uwb_ie_hdr *ies, size_t size)
-{
- int result = 0;
- void *ptr;
- const struct uwb_ie_hdr *ie;
-
- mutex_lock(&uwb_rc->ies_mutex);
-
- ptr = (void *)ies;
- for (;;) {
- ie = uwb_ie_next(&ptr, &size);
- if (!ie)
- break;
-
- result = uwb_rc_ie_add_one(uwb_rc, ie);
- if (result < 0)
- break;
- }
- if (result >= 0) {
- if (size == 0) {
- if (uwb_rc->beaconing != -1)
- result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies);
- } else
- result = -EINVAL;
- }
-
- mutex_unlock(&uwb_rc->ies_mutex);
-
- return result;
-}
-EXPORT_SYMBOL_GPL(uwb_rc_ie_add);
-
-
-/*
- * Remove an IE from internal cache
- *
- * We are dealing with our internal IE cache so no need to verify that the
- * IEs are valid (it has been done already).
- *
- * Should be called with ies_mutex held
- *
- * We do not break out once an IE is found in the cache. It is currently
- * possible to have more than one IE with the same ID included in the
- * beacon. We don't reallocate, we just mark the size smaller.
- */
-static
-void uwb_rc_ie_cache_rm(struct uwb_rc *uwb_rc, enum uwb_ie to_remove)
-{
- struct uwb_ie_hdr *ie;
- size_t len = le16_to_cpu(uwb_rc->ies->wIELength);
- void *ptr;
- size_t size;
-
- ptr = uwb_rc->ies->IEData;
- size = len;
- for (;;) {
- ie = uwb_ie_next(&ptr, &size);
- if (!ie)
- break;
- if (ie->element_id == to_remove) {
- len -= sizeof(struct uwb_ie_hdr) + ie->length;
- memmove(ie, ptr, size);
- ptr = ie;
- }
- }
- uwb_rc->ies->wIELength = cpu_to_le16(len);
-}
-
-
-/**
- * uwb_rc_ie_rm - remove an IE from the radio controller's beacon
- * @uwb_rc: the radio controller.
- * @element_id: the element ID of the IE to remove.
- *
- * Only IEs previously added with uwb_rc_ie_add() may be removed.
- *
- * Returns 0 on success; or -ve the SET-IE command to the radio
- * controller failed.
- */
-int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id)
-{
- int result = 0;
-
- mutex_lock(&uwb_rc->ies_mutex);
-
- uwb_rc_ie_cache_rm(uwb_rc, element_id);
-
- if (uwb_rc->beaconing != -1)
- result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies);
-
- mutex_unlock(&uwb_rc->ies_mutex);
-
- return result;
-}
-EXPORT_SYMBOL_GPL(uwb_rc_ie_rm);
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Ultra Wide Band
- * Debug interface commands
- *
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- */
-#ifndef __LINUX__UWB__DEBUG_CMD_H__
-#define __LINUX__UWB__DEBUG_CMD_H__
-
-#include <linux/types.h>
-
-/*
- * Debug interface commands
- *
- * UWB_DBG_CMD_RSV_ESTABLISH: Establish a new unicast reservation.
- *
- * UWB_DBG_CMD_RSV_TERMINATE: Terminate the Nth reservation.
- */
-
-enum uwb_dbg_cmd_type {
- UWB_DBG_CMD_RSV_ESTABLISH = 1,
- UWB_DBG_CMD_RSV_TERMINATE = 2,
- UWB_DBG_CMD_IE_ADD = 3,
- UWB_DBG_CMD_IE_RM = 4,
- UWB_DBG_CMD_RADIO_START = 5,
- UWB_DBG_CMD_RADIO_STOP = 6,
-};
-
-struct uwb_dbg_cmd_rsv_establish {
- __u8 target[6];
- __u8 type;
- __u16 max_mas;
- __u16 min_mas;
- __u8 max_interval;
-};
-
-struct uwb_dbg_cmd_rsv_terminate {
- int index;
-};
-
-struct uwb_dbg_cmd_ie {
- __u8 data[128];
- int len;
-};
-
-struct uwb_dbg_cmd {
- __u32 type;
- union {
- struct uwb_dbg_cmd_rsv_establish rsv_establish;
- struct uwb_dbg_cmd_rsv_terminate rsv_terminate;
- struct uwb_dbg_cmd_ie ie_add;
- struct uwb_dbg_cmd_ie ie_rm;
- };
-};
-
-#endif /* #ifndef __LINUX__UWB__DEBUG_CMD_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Ultra Wide Band
- * UWB Standard definitions
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * All these definitions are based on the ECMA-368 standard.
- *
- * Note all definitions are Little Endian in the wire, and we will
- * convert them to host order before operating on the bitfields (that
- * yes, we use extensively).
- */
-
-#ifndef __LINUX__UWB_SPEC_H__
-#define __LINUX__UWB_SPEC_H__
-
-#include <linux/types.h>
-#include <linux/bitmap.h>
-#include <linux/if_ether.h>
-
-#define i1480_FW 0x00000303
-/* #define i1480_FW 0x00000302 */
-
-/**
- * Number of Medium Access Slots in a superframe.
- *
- * UWB divides time in SuperFrames, each one divided in 256 pieces, or
- * Medium Access Slots. See MBOA MAC[5.4.5] for details. The MAS is the
- * basic bandwidth allocation unit in UWB.
- */
-enum { UWB_NUM_MAS = 256 };
-
-/**
- * Number of Zones in superframe.
- *
- * UWB divides the superframe into zones with numbering starting from BPST.
- * See MBOA MAC[16.8.6]
- */
-enum { UWB_NUM_ZONES = 16 };
-
-/*
- * Number of MAS in a zone.
- */
-#define UWB_MAS_PER_ZONE (UWB_NUM_MAS / UWB_NUM_ZONES)
-
-/*
- * Number of MAS required before a row can be considered available.
- */
-#define UWB_USABLE_MAS_PER_ROW (UWB_NUM_ZONES - 1)
-
-/*
- * Number of streams per DRP reservation between a pair of devices.
- *
- * [ECMA-368] section 16.8.6.
- */
-enum { UWB_NUM_STREAMS = 8 };
-
-/*
- * mMasLength
- *
- * The length of a MAS in microseconds.
- *
- * [ECMA-368] section 17.16.
- */
-enum { UWB_MAS_LENGTH_US = 256 };
-
-/*
- * mBeaconSlotLength
- *
- * The length of the beacon slot in microseconds.
- *
- * [ECMA-368] section 17.16
- */
-enum { UWB_BEACON_SLOT_LENGTH_US = 85 };
-
-/*
- * mMaxLostBeacons
- *
- * The number beacons missing in consecutive superframes before a
- * device can be considered as unreachable.
- *
- * [ECMA-368] section 17.16
- */
-enum { UWB_MAX_LOST_BEACONS = 3 };
-
-/*
- * mDRPBackOffWinMin
- *
- * The minimum number of superframes to wait before trying to reserve
- * extra MAS.
- *
- * [ECMA-368] section 17.16
- */
-enum { UWB_DRP_BACKOFF_WIN_MIN = 2 };
-
-/*
- * mDRPBackOffWinMax
- *
- * The maximum number of superframes to wait before trying to reserve
- * extra MAS.
- *
- * [ECMA-368] section 17.16
- */
-enum { UWB_DRP_BACKOFF_WIN_MAX = 16 };
-
-/*
- * Length of a superframe in microseconds.
- */
-#define UWB_SUPERFRAME_LENGTH_US (UWB_MAS_LENGTH_US * UWB_NUM_MAS)
-
-/**
- * UWB MAC address
- *
- * It is *imperative* that this struct is exactly 6 packed bytes (as
- * it is also used to define headers sent down and up the wire/radio).
- */
-struct uwb_mac_addr {
- u8 data[ETH_ALEN];
-} __attribute__((packed));
-
-
-/**
- * UWB device address
- *
- * It is *imperative* that this struct is exactly 6 packed bytes (as
- * it is also used to define headers sent down and up the wire/radio).
- */
-struct uwb_dev_addr {
- u8 data[2];
-} __attribute__((packed));
-
-
-/**
- * Types of UWB addresses
- *
- * Order matters (by size).
- */
-enum uwb_addr_type {
- UWB_ADDR_DEV = 0,
- UWB_ADDR_MAC = 1,
-};
-
-
-/** Size of a char buffer for printing a MAC/device address */
-enum { UWB_ADDR_STRSIZE = 32 };
-
-
-/** UWB WiMedia protocol IDs. */
-enum uwb_prid {
- UWB_PRID_WLP_RESERVED = 0x0000,
- UWB_PRID_WLP = 0x0001,
- UWB_PRID_WUSB_BOT = 0x0010,
- UWB_PRID_WUSB = 0x0010,
- UWB_PRID_WUSB_TOP = 0x001F,
-};
-
-
-/** PHY Rate (MBOA MAC[7.8.12, Table 61]) */
-enum uwb_phy_rate {
- UWB_PHY_RATE_53 = 0,
- UWB_PHY_RATE_80,
- UWB_PHY_RATE_106,
- UWB_PHY_RATE_160,
- UWB_PHY_RATE_200,
- UWB_PHY_RATE_320,
- UWB_PHY_RATE_400,
- UWB_PHY_RATE_480,
- UWB_PHY_RATE_INVALID
-};
-
-
-/**
- * Different ways to scan (MBOA MAC[6.2.2, Table 8], WUSB[Table 8-78])
- */
-enum uwb_scan_type {
- UWB_SCAN_ONLY = 0,
- UWB_SCAN_OUTSIDE_BP,
- UWB_SCAN_WHILE_INACTIVE,
- UWB_SCAN_DISABLED,
- UWB_SCAN_ONLY_STARTTIME,
- UWB_SCAN_TOP
-};
-
-
-/** ACK Policy types (MBOA MAC[7.2.1.3]) */
-enum uwb_ack_pol {
- UWB_ACK_NO = 0,
- UWB_ACK_INM = 1,
- UWB_ACK_B = 2,
- UWB_ACK_B_REQ = 3,
-};
-
-
-/** DRP reservation types ([ECMA-368 table 106) */
-enum uwb_drp_type {
- UWB_DRP_TYPE_ALIEN_BP = 0,
- UWB_DRP_TYPE_HARD,
- UWB_DRP_TYPE_SOFT,
- UWB_DRP_TYPE_PRIVATE,
- UWB_DRP_TYPE_PCA,
-};
-
-
-/** DRP Reason Codes ([ECMA-368] table 107) */
-enum uwb_drp_reason {
- UWB_DRP_REASON_ACCEPTED = 0,
- UWB_DRP_REASON_CONFLICT,
- UWB_DRP_REASON_PENDING,
- UWB_DRP_REASON_DENIED,
- UWB_DRP_REASON_MODIFIED,
-};
-
-/** Relinquish Request Reason Codes ([ECMA-368] table 113) */
-enum uwb_relinquish_req_reason {
- UWB_RELINQUISH_REQ_REASON_NON_SPECIFIC = 0,
- UWB_RELINQUISH_REQ_REASON_OVER_ALLOCATION,
-};
-
-/**
- * DRP Notification Reason Codes (WHCI 0.95 [3.1.4.9])
- */
-enum uwb_drp_notif_reason {
- UWB_DRP_NOTIF_DRP_IE_RCVD = 0,
- UWB_DRP_NOTIF_CONFLICT,
- UWB_DRP_NOTIF_TERMINATE,
-};
-
-
-/** Allocation of MAS slots in a DRP request MBOA MAC[7.8.7] */
-struct uwb_drp_alloc {
- __le16 zone_bm;
- __le16 mas_bm;
-} __attribute__((packed));
-
-
-/** General MAC Header format (ECMA-368[16.2]) */
-struct uwb_mac_frame_hdr {
- __le16 Frame_Control;
- struct uwb_dev_addr DestAddr;
- struct uwb_dev_addr SrcAddr;
- __le16 Sequence_Control;
- __le16 Access_Information;
-} __attribute__((packed));
-
-
-/**
- * uwb_beacon_frame - a beacon frame including MAC headers
- *
- * [ECMA] section 16.3.
- */
-struct uwb_beacon_frame {
- struct uwb_mac_frame_hdr hdr;
- struct uwb_mac_addr Device_Identifier; /* may be a NULL EUI-48 */
- u8 Beacon_Slot_Number;
- u8 Device_Control;
- u8 IEData[];
-} __attribute__((packed));
-
-
-/** Information Element codes (MBOA MAC[T54]) */
-enum uwb_ie {
- UWB_PCA_AVAILABILITY = 2,
- UWB_IE_DRP_AVAILABILITY = 8,
- UWB_IE_DRP = 9,
- UWB_BP_SWITCH_IE = 11,
- UWB_MAC_CAPABILITIES_IE = 12,
- UWB_PHY_CAPABILITIES_IE = 13,
- UWB_APP_SPEC_PROBE_IE = 15,
- UWB_IDENTIFICATION_IE = 19,
- UWB_MASTER_KEY_ID_IE = 20,
- UWB_RELINQUISH_REQUEST_IE = 21,
- UWB_IE_WLP = 250, /* WiMedia Logical Link Control Protocol WLP 0.99 */
- UWB_APP_SPEC_IE = 255,
-};
-
-
-/**
- * Header common to all Information Elements (IEs)
- */
-struct uwb_ie_hdr {
- u8 element_id; /* enum uwb_ie */
- u8 length;
-} __attribute__((packed));
-
-
-/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.6]) */
-struct uwb_ie_drp {
- struct uwb_ie_hdr hdr;
- __le16 drp_control;
- struct uwb_dev_addr dev_addr;
- struct uwb_drp_alloc allocs[];
-} __attribute__((packed));
-
-static inline int uwb_ie_drp_type(struct uwb_ie_drp *ie)
-{
- return (le16_to_cpu(ie->drp_control) >> 0) & 0x7;
-}
-
-static inline int uwb_ie_drp_stream_index(struct uwb_ie_drp *ie)
-{
- return (le16_to_cpu(ie->drp_control) >> 3) & 0x7;
-}
-
-static inline int uwb_ie_drp_reason_code(struct uwb_ie_drp *ie)
-{
- return (le16_to_cpu(ie->drp_control) >> 6) & 0x7;
-}
-
-static inline int uwb_ie_drp_status(struct uwb_ie_drp *ie)
-{
- return (le16_to_cpu(ie->drp_control) >> 9) & 0x1;
-}
-
-static inline int uwb_ie_drp_owner(struct uwb_ie_drp *ie)
-{
- return (le16_to_cpu(ie->drp_control) >> 10) & 0x1;
-}
-
-static inline int uwb_ie_drp_tiebreaker(struct uwb_ie_drp *ie)
-{
- return (le16_to_cpu(ie->drp_control) >> 11) & 0x1;
-}
-
-static inline int uwb_ie_drp_unsafe(struct uwb_ie_drp *ie)
-{
- return (le16_to_cpu(ie->drp_control) >> 12) & 0x1;
-}
-
-static inline void uwb_ie_drp_set_type(struct uwb_ie_drp *ie, enum uwb_drp_type type)
-{
- u16 drp_control = le16_to_cpu(ie->drp_control);
- drp_control = (drp_control & ~(0x7 << 0)) | (type << 0);
- ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_stream_index(struct uwb_ie_drp *ie, int stream_index)
-{
- u16 drp_control = le16_to_cpu(ie->drp_control);
- drp_control = (drp_control & ~(0x7 << 3)) | (stream_index << 3);
- ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_reason_code(struct uwb_ie_drp *ie,
- enum uwb_drp_reason reason_code)
-{
- u16 drp_control = le16_to_cpu(ie->drp_control);
- drp_control = (ie->drp_control & ~(0x7 << 6)) | (reason_code << 6);
- ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_status(struct uwb_ie_drp *ie, int status)
-{
- u16 drp_control = le16_to_cpu(ie->drp_control);
- drp_control = (drp_control & ~(0x1 << 9)) | (status << 9);
- ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_owner(struct uwb_ie_drp *ie, int owner)
-{
- u16 drp_control = le16_to_cpu(ie->drp_control);
- drp_control = (drp_control & ~(0x1 << 10)) | (owner << 10);
- ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_tiebreaker(struct uwb_ie_drp *ie, int tiebreaker)
-{
- u16 drp_control = le16_to_cpu(ie->drp_control);
- drp_control = (drp_control & ~(0x1 << 11)) | (tiebreaker << 11);
- ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_unsafe(struct uwb_ie_drp *ie, int unsafe)
-{
- u16 drp_control = le16_to_cpu(ie->drp_control);
- drp_control = (drp_control & ~(0x1 << 12)) | (unsafe << 12);
- ie->drp_control = cpu_to_le16(drp_control);
-}
-
-/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.7]) */
-struct uwb_ie_drp_avail {
- struct uwb_ie_hdr hdr;
- DECLARE_BITMAP(bmp, UWB_NUM_MAS);
-} __attribute__((packed));
-
-/* Relinqish Request IE ([ECMA-368] section 16.8.19). */
-struct uwb_relinquish_request_ie {
- struct uwb_ie_hdr hdr;
- __le16 relinquish_req_control;
- struct uwb_dev_addr dev_addr;
- struct uwb_drp_alloc allocs[];
-} __attribute__((packed));
-
-static inline int uwb_ie_relinquish_req_reason_code(struct uwb_relinquish_request_ie *ie)
-{
- return (le16_to_cpu(ie->relinquish_req_control) >> 0) & 0xf;
-}
-
-static inline void uwb_ie_relinquish_req_set_reason_code(struct uwb_relinquish_request_ie *ie,
- int reason_code)
-{
- u16 ctrl = le16_to_cpu(ie->relinquish_req_control);
- ctrl = (ctrl & ~(0xf << 0)) | (reason_code << 0);
- ie->relinquish_req_control = cpu_to_le16(ctrl);
-}
-
-/**
- * The Vendor ID is set to an OUI that indicates the vendor of the device.
- * ECMA-368 [16.8.10]
- */
-struct uwb_vendor_id {
- u8 data[3];
-} __attribute__((packed));
-
-/**
- * The device type ID
- * FIXME: clarify what this means
- * ECMA-368 [16.8.10]
- */
-struct uwb_device_type_id {
- u8 data[3];
-} __attribute__((packed));
-
-
-/**
- * UWB device information types
- * ECMA-368 [16.8.10]
- */
-enum uwb_dev_info_type {
- UWB_DEV_INFO_VENDOR_ID = 0,
- UWB_DEV_INFO_VENDOR_TYPE,
- UWB_DEV_INFO_NAME,
-};
-
-/**
- * UWB device information found in Identification IE
- * ECMA-368 [16.8.10]
- */
-struct uwb_dev_info {
- u8 type; /* enum uwb_dev_info_type */
- u8 length;
- u8 data[];
-} __attribute__((packed));
-
-/**
- * UWB Identification IE
- * ECMA-368 [16.8.10]
- */
-struct uwb_identification_ie {
- struct uwb_ie_hdr hdr;
- struct uwb_dev_info info[];
-} __attribute__((packed));
-
-/*
- * UWB Radio Controller
- *
- * These definitions are common to the Radio Control layers as
- * exported by the WUSB1.0 HWA and WHCI interfaces.
- */
-
-/** Radio Control Command Block (WUSB1.0[Table 8-65] and WHCI 0.95) */
-struct uwb_rccb {
- u8 bCommandType; /* enum hwa_cet */
- __le16 wCommand; /* Command code */
- u8 bCommandContext; /* Context ID */
-} __attribute__((packed));
-
-
-/** Radio Control Event Block (WUSB[table 8-66], WHCI 0.95) */
-struct uwb_rceb {
- u8 bEventType; /* enum hwa_cet */
- __le16 wEvent; /* Event code */
- u8 bEventContext; /* Context ID */
-} __attribute__((packed));
-
-
-enum {
- UWB_RC_CET_GENERAL = 0, /* General Command/Event type */
- UWB_RC_CET_EX_TYPE_1 = 1, /* Extended Type 1 Command/Event type */
-};
-
-/* Commands to the radio controller */
-enum uwb_rc_cmd {
- UWB_RC_CMD_CHANNEL_CHANGE = 16,
- UWB_RC_CMD_DEV_ADDR_MGMT = 17, /* Device Address Management */
- UWB_RC_CMD_GET_IE = 18, /* GET Information Elements */
- UWB_RC_CMD_RESET = 19,
- UWB_RC_CMD_SCAN = 20, /* Scan management */
- UWB_RC_CMD_SET_BEACON_FILTER = 21,
- UWB_RC_CMD_SET_DRP_IE = 22, /* Dynamic Reservation Protocol IEs */
- UWB_RC_CMD_SET_IE = 23, /* Information Element management */
- UWB_RC_CMD_SET_NOTIFICATION_FILTER = 24,
- UWB_RC_CMD_SET_TX_POWER = 25,
- UWB_RC_CMD_SLEEP = 26,
- UWB_RC_CMD_START_BEACON = 27,
- UWB_RC_CMD_STOP_BEACON = 28,
- UWB_RC_CMD_BP_MERGE = 29,
- UWB_RC_CMD_SEND_COMMAND_FRAME = 30,
- UWB_RC_CMD_SET_ASIE_NOTIF = 31,
-};
-
-/* Notifications from the radio controller */
-enum uwb_rc_evt {
- UWB_RC_EVT_IE_RCV = 0,
- UWB_RC_EVT_BEACON = 1,
- UWB_RC_EVT_BEACON_SIZE = 2,
- UWB_RC_EVT_BPOIE_CHANGE = 3,
- UWB_RC_EVT_BP_SLOT_CHANGE = 4,
- UWB_RC_EVT_BP_SWITCH_IE_RCV = 5,
- UWB_RC_EVT_DEV_ADDR_CONFLICT = 6,
- UWB_RC_EVT_DRP_AVAIL = 7,
- UWB_RC_EVT_DRP = 8,
- UWB_RC_EVT_BP_SWITCH_STATUS = 9,
- UWB_RC_EVT_CMD_FRAME_RCV = 10,
- UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV = 11,
- /* Events (command responses) use the same code as the command */
- UWB_RC_EVT_UNKNOWN_CMD_RCV = 65535,
-};
-
-enum uwb_rc_extended_type_1_cmd {
- UWB_RC_SET_DAA_ENERGY_MASK = 32,
- UWB_RC_SET_NOTIFICATION_FILTER_EX = 33,
-};
-
-enum uwb_rc_extended_type_1_evt {
- UWB_RC_DAA_ENERGY_DETECTED = 0,
-};
-
-/* Radio Control Result Code. [WHCI] table 3-3. */
-enum {
- UWB_RC_RES_SUCCESS = 0,
- UWB_RC_RES_FAIL,
- UWB_RC_RES_FAIL_HARDWARE,
- UWB_RC_RES_FAIL_NO_SLOTS,
- UWB_RC_RES_FAIL_BEACON_TOO_LARGE,
- UWB_RC_RES_FAIL_INVALID_PARAMETER,
- UWB_RC_RES_FAIL_UNSUPPORTED_PWR_LEVEL,
- UWB_RC_RES_FAIL_INVALID_IE_DATA,
- UWB_RC_RES_FAIL_BEACON_SIZE_EXCEEDED,
- UWB_RC_RES_FAIL_CANCELLED,
- UWB_RC_RES_FAIL_INVALID_STATE,
- UWB_RC_RES_FAIL_INVALID_SIZE,
- UWB_RC_RES_FAIL_ACK_NOT_RECEIVED,
- UWB_RC_RES_FAIL_NO_MORE_ASIE_NOTIF,
- UWB_RC_RES_FAIL_TIME_OUT = 255,
-};
-
-/* Confirm event. [WHCI] section 3.1.3.1 etc. */
-struct uwb_rc_evt_confirm {
- struct uwb_rceb rceb;
- u8 bResultCode;
-} __attribute__((packed));
-
-/* Device Address Management event. [WHCI] section 3.1.3.2. */
-struct uwb_rc_evt_dev_addr_mgmt {
- struct uwb_rceb rceb;
- u8 baAddr[ETH_ALEN];
- u8 bResultCode;
-} __attribute__((packed));
-
-
-/* Get IE Event. [WHCI] section 3.1.3.3. */
-struct uwb_rc_evt_get_ie {
- struct uwb_rceb rceb;
- __le16 wIELength;
- u8 IEData[];
-} __attribute__((packed));
-
-/* Set DRP IE Event. [WHCI] section 3.1.3.7. */
-struct uwb_rc_evt_set_drp_ie {
- struct uwb_rceb rceb;
- __le16 wRemainingSpace;
- u8 bResultCode;
-} __attribute__((packed));
-
-/* Set IE Event. [WHCI] section 3.1.3.8. */
-struct uwb_rc_evt_set_ie {
- struct uwb_rceb rceb;
- __le16 RemainingSpace;
- u8 bResultCode;
-} __attribute__((packed));
-
-/* Scan command. [WHCI] 3.1.3.5. */
-struct uwb_rc_cmd_scan {
- struct uwb_rccb rccb;
- u8 bChannelNumber;
- u8 bScanState;
- __le16 wStartTime;
-} __attribute__((packed));
-
-/* Set DRP IE command. [WHCI] section 3.1.3.7. */
-struct uwb_rc_cmd_set_drp_ie {
- struct uwb_rccb rccb;
- __le16 wIELength;
- struct uwb_ie_drp IEData[];
-} __attribute__((packed));
-
-/* Set IE command. [WHCI] section 3.1.3.8. */
-struct uwb_rc_cmd_set_ie {
- struct uwb_rccb rccb;
- __le16 wIELength;
- u8 IEData[];
-} __attribute__((packed));
-
-/* Set DAA Energy Mask event. [WHCI 0.96] section 3.1.3.17. */
-struct uwb_rc_evt_set_daa_energy_mask {
- struct uwb_rceb rceb;
- __le16 wLength;
- u8 result;
-} __attribute__((packed));
-
-/* Set Notification Filter Extended event. [WHCI 0.96] section 3.1.3.18. */
-struct uwb_rc_evt_set_notification_filter_ex {
- struct uwb_rceb rceb;
- __le16 wLength;
- u8 result;
-} __attribute__((packed));
-
-/* IE Received notification. [WHCI] section 3.1.4.1. */
-struct uwb_rc_evt_ie_rcv {
- struct uwb_rceb rceb;
- struct uwb_dev_addr SrcAddr;
- __le16 wIELength;
- u8 IEData[];
-} __attribute__((packed));
-
-/* Type of the received beacon. [WHCI] section 3.1.4.2. */
-enum uwb_rc_beacon_type {
- UWB_RC_BEACON_TYPE_SCAN = 0,
- UWB_RC_BEACON_TYPE_NEIGHBOR,
- UWB_RC_BEACON_TYPE_OL_ALIEN,
- UWB_RC_BEACON_TYPE_NOL_ALIEN,
-};
-
-/* Beacon received notification. [WHCI] 3.1.4.2. */
-struct uwb_rc_evt_beacon {
- struct uwb_rceb rceb;
- u8 bChannelNumber;
- u8 bBeaconType;
- __le16 wBPSTOffset;
- u8 bLQI;
- u8 bRSSI;
- __le16 wBeaconInfoLength;
- u8 BeaconInfo[];
-} __attribute__((packed));
-
-
-/* Beacon Size Change notification. [WHCI] section 3.1.4.3 */
-struct uwb_rc_evt_beacon_size {
- struct uwb_rceb rceb;
- __le16 wNewBeaconSize;
-} __attribute__((packed));
-
-
-/* BPOIE Change notification. [WHCI] section 3.1.4.4. */
-struct uwb_rc_evt_bpoie_change {
- struct uwb_rceb rceb;
- __le16 wBPOIELength;
- u8 BPOIE[];
-} __attribute__((packed));
-
-
-/* Beacon Slot Change notification. [WHCI] section 3.1.4.5. */
-struct uwb_rc_evt_bp_slot_change {
- struct uwb_rceb rceb;
- u8 slot_info;
-} __attribute__((packed));
-
-static inline int uwb_rc_evt_bp_slot_change_slot_num(
- const struct uwb_rc_evt_bp_slot_change *evt)
-{
- return evt->slot_info & 0x7f;
-}
-
-static inline int uwb_rc_evt_bp_slot_change_no_slot(
- const struct uwb_rc_evt_bp_slot_change *evt)
-{
- return (evt->slot_info & 0x80) >> 7;
-}
-
-/* BP Switch IE Received notification. [WHCI] section 3.1.4.6. */
-struct uwb_rc_evt_bp_switch_ie_rcv {
- struct uwb_rceb rceb;
- struct uwb_dev_addr wSrcAddr;
- __le16 wIELength;
- u8 IEData[];
-} __attribute__((packed));
-
-/* DevAddr Conflict notification. [WHCI] section 3.1.4.7. */
-struct uwb_rc_evt_dev_addr_conflict {
- struct uwb_rceb rceb;
-} __attribute__((packed));
-
-/* DRP notification. [WHCI] section 3.1.4.9. */
-struct uwb_rc_evt_drp {
- struct uwb_rceb rceb;
- struct uwb_dev_addr src_addr;
- u8 reason;
- u8 beacon_slot_number;
- __le16 ie_length;
- u8 ie_data[];
-} __attribute__((packed));
-
-static inline enum uwb_drp_notif_reason uwb_rc_evt_drp_reason(struct uwb_rc_evt_drp *evt)
-{
- return evt->reason & 0x0f;
-}
-
-
-/* DRP Availability Change notification. [WHCI] section 3.1.4.8. */
-struct uwb_rc_evt_drp_avail {
- struct uwb_rceb rceb;
- DECLARE_BITMAP(bmp, UWB_NUM_MAS);
-} __attribute__((packed));
-
-/* BP switch status notification. [WHCI] section 3.1.4.10. */
-struct uwb_rc_evt_bp_switch_status {
- struct uwb_rceb rceb;
- u8 status;
- u8 slot_offset;
- __le16 bpst_offset;
- u8 move_countdown;
-} __attribute__((packed));
-
-/* Command Frame Received notification. [WHCI] section 3.1.4.11. */
-struct uwb_rc_evt_cmd_frame_rcv {
- struct uwb_rceb rceb;
- __le16 receive_time;
- struct uwb_dev_addr wSrcAddr;
- struct uwb_dev_addr wDstAddr;
- __le16 control;
- __le16 reserved;
- __le16 dataLength;
- u8 data[];
-} __attribute__((packed));
-
-/* Channel Change IE Received notification. [WHCI] section 3.1.4.12. */
-struct uwb_rc_evt_channel_change_ie_rcv {
- struct uwb_rceb rceb;
- struct uwb_dev_addr wSrcAddr;
- __le16 wIELength;
- u8 IEData[];
-} __attribute__((packed));
-
-/* DAA Energy Detected notification. [WHCI 0.96] section 3.1.4.14. */
-struct uwb_rc_evt_daa_energy_detected {
- struct uwb_rceb rceb;
- __le16 wLength;
- u8 bandID;
- u8 reserved;
- u8 toneBmp[16];
-} __attribute__((packed));
-
-
-/**
- * Radio Control Interface Class Descriptor
- *
- * WUSB 1.0 [8.6.1.2]
- */
-struct uwb_rc_control_intf_class_desc {
- u8 bLength;
- u8 bDescriptorType;
- __le16 bcdRCIVersion;
-} __attribute__((packed));
-
-#endif /* #ifndef __LINUX__UWB_SPEC_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * UWB Multi-interface Controller support.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * UMC (UWB Multi-interface Controller) capabilities (e.g., radio
- * controller, host controller) are presented as devices on the "umc"
- * bus.
- *
- * The radio controller is not strictly a UMC capability but it's
- * useful to present it as such.
- *
- * References:
- *
- * [WHCI] Wireless Host Controller Interface Specification for
- * Certified Wireless Universal Serial Bus, revision 0.95.
- *
- * How this works is kind of convoluted but simple. The whci.ko driver
- * loads when WHCI devices are detected. These WHCI devices expose
- * many devices in the same PCI function (they couldn't have reused
- * functions, no), so for each PCI function that exposes these many
- * devices, whci ceates a umc_dev [whci_probe() -> whci_add_cap()]
- * with umc_device_create() and adds it to the bus with
- * umc_device_register().
- *
- * umc_device_register() calls device_register() which will push the
- * bus management code to load your UMC driver's somehting_probe()
- * that you have registered for that capability code.
- *
- * Now when the WHCI device is removed, whci_remove() will go over
- * each umc_dev assigned to each of the PCI function's capabilities
- * and through whci_del_cap() call umc_device_unregister() each
- * created umc_dev. Of course, if you are bound to the device, your
- * driver's something_remove() will be called.
- */
-
-#ifndef _LINUX_UWB_UMC_H_
-#define _LINUX_UWB_UMC_H_
-
-#include <linux/device.h>
-#include <linux/pci.h>
-
-/*
- * UMC capability IDs.
- *
- * 0x00 is reserved so use it for the radio controller device.
- *
- * [WHCI] table 2-8
- */
-#define UMC_CAP_ID_WHCI_RC 0x00 /* radio controller */
-#define UMC_CAP_ID_WHCI_WUSB_HC 0x01 /* WUSB host controller */
-
-/**
- * struct umc_dev - UMC capability device
- *
- * @version: version of the specification this capability conforms to.
- * @cap_id: capability ID.
- * @bar: PCI Bar (64 bit) where the resource lies
- * @resource: register space resource.
- * @irq: interrupt line.
- */
-struct umc_dev {
- u16 version;
- u8 cap_id;
- u8 bar;
- struct resource resource;
- unsigned irq;
- struct device dev;
-};
-
-#define to_umc_dev(d) container_of(d, struct umc_dev, dev)
-
-/**
- * struct umc_driver - UMC capability driver
- * @cap_id: supported capability ID.
- * @match: driver specific capability matching function.
- * @match_data: driver specific data for match() (e.g., a
- * table of pci_device_id's if umc_match_pci_id() is used).
- */
-struct umc_driver {
- char *name;
- u8 cap_id;
- int (*match)(struct umc_driver *, struct umc_dev *);
- const void *match_data;
-
- int (*probe)(struct umc_dev *);
- void (*remove)(struct umc_dev *);
- int (*pre_reset)(struct umc_dev *);
- int (*post_reset)(struct umc_dev *);
-
- struct device_driver driver;
-};
-
-#define to_umc_driver(d) container_of(d, struct umc_driver, driver)
-
-extern struct bus_type umc_bus_type;
-
-struct umc_dev *umc_device_create(struct device *parent, int n);
-int __must_check umc_device_register(struct umc_dev *umc);
-void umc_device_unregister(struct umc_dev *umc);
-
-int __must_check __umc_driver_register(struct umc_driver *umc_drv,
- struct module *mod,
- const char *mod_name);
-
-/**
- * umc_driver_register - register a UMC capabiltity driver.
- * @umc_drv: pointer to the driver.
- */
-#define umc_driver_register(umc_drv) \
- __umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME)
-
-void umc_driver_unregister(struct umc_driver *umc_drv);
-
-/*
- * Utility function you can use to match (umc_driver->match) against a
- * null-terminated array of 'struct pci_device_id' in
- * umc_driver->match_data.
- */
-int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc);
-
-/**
- * umc_parent_pci_dev - return the UMC's parent PCI device or NULL if none
- * @umc_dev: UMC device whose parent PCI device we are looking for
- *
- * DIRTY!!! DON'T RELY ON THIS
- *
- * FIXME: This is as dirty as it gets, but we need some way to check
- * the correct type of umc_dev->parent (so that for example, we can
- * cast to pci_dev). Casting to pci_dev is necessary because at some
- * point we need to request resources from the device. Mapping is
- * easily over come (ioremap and stuff are bus agnostic), but hooking
- * up to some error handlers (such as pci error handlers) might need
- * this.
- *
- * THIS might (probably will) be removed in the future, so don't count
- * on it.
- */
-static inline struct pci_dev *umc_parent_pci_dev(struct umc_dev *umc_dev)
-{
- struct pci_dev *pci_dev = NULL;
- if (dev_is_pci(umc_dev->dev.parent))
- pci_dev = to_pci_dev(umc_dev->dev.parent);
- return pci_dev;
-}
-
-/**
- * umc_dev_get() - reference a UMC device.
- * @umc_dev: Pointer to UMC device.
- *
- * NOTE: we are assuming in this whole scheme that the parent device
- * is referenced at _probe() time and unreferenced at _remove()
- * time by the parent's subsystem.
- */
-static inline struct umc_dev *umc_dev_get(struct umc_dev *umc_dev)
-{
- get_device(&umc_dev->dev);
- return umc_dev;
-}
-
-/**
- * umc_dev_put() - unreference a UMC device.
- * @umc_dev: Pointer to UMC device.
- */
-static inline void umc_dev_put(struct umc_dev *umc_dev)
-{
- put_device(&umc_dev->dev);
-}
-
-/**
- * umc_set_drvdata - set UMC device's driver data.
- * @umc_dev: Pointer to UMC device.
- * @data: Data to set.
- */
-static inline void umc_set_drvdata(struct umc_dev *umc_dev, void *data)
-{
- dev_set_drvdata(&umc_dev->dev, data);
-}
-
-/**
- * umc_get_drvdata - recover UMC device's driver data.
- * @umc_dev: Pointer to UMC device.
- */
-static inline void *umc_get_drvdata(struct umc_dev *umc_dev)
-{
- return dev_get_drvdata(&umc_dev->dev);
-}
-
-int umc_controller_reset(struct umc_dev *umc);
-
-#endif /* #ifndef _LINUX_UWB_UMC_H_ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Wireless Host Controller Interface for Ultra-Wide-Band and Wireless USB
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * References:
- * [WHCI] Wireless Host Controller Interface Specification for
- * Certified Wireless Universal Serial Bus, revision 0.95.
- */
-#ifndef _LINUX_UWB_WHCI_H_
-#define _LINUX_UWB_WHCI_H_
-
-#include <linux/pci.h>
-
-/*
- * UWB interface capability registers (offsets from UWBBASE)
- *
- * [WHCI] section 2.2
- */
-#define UWBCAPINFO 0x00 /* == UWBCAPDATA(0) */
-# define UWBCAPINFO_TO_N_CAPS(c) (((c) >> 0) & 0xFull)
-#define UWBCAPDATA(n) (8*(n))
-# define UWBCAPDATA_TO_VERSION(c) (((c) >> 32) & 0xFFFFull)
-# define UWBCAPDATA_TO_OFFSET(c) (((c) >> 18) & 0x3FFFull)
-# define UWBCAPDATA_TO_BAR(c) (((c) >> 16) & 0x3ull)
-# define UWBCAPDATA_TO_SIZE(c) ((((c) >> 8) & 0xFFull) * sizeof(u32))
-# define UWBCAPDATA_TO_CAP_ID(c) (((c) >> 0) & 0xFFull)
-
-/* Size of the WHCI capability data (including the RC capability) for
- a device with n capabilities. */
-#define UWBCAPDATA_SIZE(n) (8 + 8*(n))
-
-
-/*
- * URC registers (offsets from URCBASE)
- *
- * [WHCI] section 2.3
- */
-#define URCCMD 0x00
-# define URCCMD_RESET (1 << 31) /* UMC Hardware reset */
-# define URCCMD_RS (1 << 30) /* Run/Stop */
-# define URCCMD_EARV (1 << 29) /* Event Address Register Valid */
-# define URCCMD_ACTIVE (1 << 15) /* Command is active */
-# define URCCMD_IWR (1 << 14) /* Interrupt When Ready */
-# define URCCMD_SIZE_MASK 0x00000fff /* Command size mask */
-#define URCSTS 0x04
-# define URCSTS_EPS (1 << 17) /* Event Processing Status */
-# define URCSTS_HALTED (1 << 16) /* RC halted */
-# define URCSTS_HSE (1 << 10) /* Host System Error...fried */
-# define URCSTS_ER (1 << 9) /* Event Ready */
-# define URCSTS_RCI (1 << 8) /* Ready for Command Interrupt */
-# define URCSTS_INT_MASK 0x00000700 /* URC interrupt sources */
-# define URCSTS_ISI 0x000000ff /* Interrupt Source Identification */
-#define URCINTR 0x08
-# define URCINTR_EN_ALL 0x000007ff /* Enable all interrupt sources */
-#define URCCMDADDR 0x10
-#define URCEVTADDR 0x18
-# define URCEVTADDR_OFFSET_MASK 0xfff /* Event pointer offset mask */
-
-
-/** Write 32 bit @value to little endian register at @addr */
-static inline
-void le_writel(u32 value, void __iomem *addr)
-{
- iowrite32(value, addr);
-}
-
-
-/** Read from 32 bit little endian register at @addr */
-static inline
-u32 le_readl(void __iomem *addr)
-{
- return ioread32(addr);
-}
-
-
-/** Write 64 bit @value to little endian register at @addr */
-static inline
-void le_writeq(u64 value, void __iomem *addr)
-{
- iowrite32(value, addr);
- iowrite32(value >> 32, addr + 4);
-}
-
-
-/** Read from 64 bit little endian register at @addr */
-static inline
-u64 le_readq(void __iomem *addr)
-{
- u64 value;
- value = ioread32(addr);
- value |= (u64)ioread32(addr + 4) << 32;
- return value;
-}
-
-extern int whci_wait_for(struct device *dev, u32 __iomem *reg,
- u32 mask, u32 result,
- unsigned long max_ms, const char *tag);
-
-#endif /* #ifndef _LINUX_UWB_WHCI_H_ */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * Life cycle of devices
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <linux/kdev_t.h>
-#include <linux/random.h>
-#include <linux/stat.h>
-#include "uwb-internal.h"
-
-/* We initialize addresses to 0xff (invalid, as it is bcast) */
-static inline void uwb_dev_addr_init(struct uwb_dev_addr *addr)
-{
- memset(&addr->data, 0xff, sizeof(addr->data));
-}
-
-static inline void uwb_mac_addr_init(struct uwb_mac_addr *addr)
-{
- memset(&addr->data, 0xff, sizeof(addr->data));
-}
-
-/*
- * Add callback @new to be called when an event occurs in @rc.
- */
-int uwb_notifs_register(struct uwb_rc *rc, struct uwb_notifs_handler *new)
-{
- if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
- return -ERESTARTSYS;
- list_add(&new->list_node, &rc->notifs_chain.list);
- mutex_unlock(&rc->notifs_chain.mutex);
- return 0;
-}
-EXPORT_SYMBOL_GPL(uwb_notifs_register);
-
-/*
- * Remove event handler (callback)
- */
-int uwb_notifs_deregister(struct uwb_rc *rc, struct uwb_notifs_handler *entry)
-{
- if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
- return -ERESTARTSYS;
- list_del(&entry->list_node);
- mutex_unlock(&rc->notifs_chain.mutex);
- return 0;
-}
-EXPORT_SYMBOL_GPL(uwb_notifs_deregister);
-
-/*
- * Notify all event handlers of a given event on @rc
- *
- * We are called with a valid reference to the device, or NULL if the
- * event is not for a particular event (e.g., a BG join event).
- */
-void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event)
-{
- struct uwb_notifs_handler *handler;
- if (mutex_lock_interruptible(&rc->notifs_chain.mutex))
- return;
- if (!list_empty(&rc->notifs_chain.list)) {
- list_for_each_entry(handler, &rc->notifs_chain.list, list_node) {
- handler->cb(handler->data, uwb_dev, event);
- }
- }
- mutex_unlock(&rc->notifs_chain.mutex);
-}
-
-/*
- * Release the backing device of a uwb_dev that has been dynamically allocated.
- */
-static void uwb_dev_sys_release(struct device *dev)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
-
- uwb_bce_put(uwb_dev->bce);
- memset(uwb_dev, 0x69, sizeof(*uwb_dev));
- kfree(uwb_dev);
-}
-
-/*
- * Initialize a UWB device instance
- *
- * Alloc, zero and call this function.
- */
-void uwb_dev_init(struct uwb_dev *uwb_dev)
-{
- mutex_init(&uwb_dev->mutex);
- device_initialize(&uwb_dev->dev);
- uwb_dev->dev.release = uwb_dev_sys_release;
- uwb_dev_addr_init(&uwb_dev->dev_addr);
- uwb_mac_addr_init(&uwb_dev->mac_addr);
- bitmap_fill(uwb_dev->streams, UWB_NUM_GLOBAL_STREAMS);
-}
-
-static ssize_t uwb_dev_EUI_48_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- char addr[UWB_ADDR_STRSIZE];
-
- uwb_mac_addr_print(addr, sizeof(addr), &uwb_dev->mac_addr);
- return sprintf(buf, "%s\n", addr);
-}
-static DEVICE_ATTR(EUI_48, S_IRUGO, uwb_dev_EUI_48_show, NULL);
-
-static ssize_t uwb_dev_DevAddr_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- char addr[UWB_ADDR_STRSIZE];
-
- uwb_dev_addr_print(addr, sizeof(addr), &uwb_dev->dev_addr);
- return sprintf(buf, "%s\n", addr);
-}
-static DEVICE_ATTR(DevAddr, S_IRUGO, uwb_dev_DevAddr_show, NULL);
-
-/*
- * Show the BPST of this device.
- *
- * Calculated from the receive time of the device's beacon and it's
- * slot number.
- */
-static ssize_t uwb_dev_BPST_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_beca_e *bce;
- struct uwb_beacon_frame *bf;
- u16 bpst;
-
- bce = uwb_dev->bce;
- mutex_lock(&bce->mutex);
- bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo;
- bpst = bce->be->wBPSTOffset
- - (u16)(bf->Beacon_Slot_Number * UWB_BEACON_SLOT_LENGTH_US);
- mutex_unlock(&bce->mutex);
-
- return sprintf(buf, "%d\n", bpst);
-}
-static DEVICE_ATTR(BPST, S_IRUGO, uwb_dev_BPST_show, NULL);
-
-/*
- * Show the IEs a device is beaconing
- *
- * We need to access the beacon cache, so we just lock it really
- * quick, print the IEs and unlock.
- *
- * We have a reference on the cache entry, so that should be
- * quite safe.
- */
-static ssize_t uwb_dev_IEs_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
-
- return uwb_bce_print_IEs(uwb_dev, uwb_dev->bce, buf, PAGE_SIZE);
-}
-static DEVICE_ATTR(IEs, S_IRUGO | S_IWUSR, uwb_dev_IEs_show, NULL);
-
-static ssize_t uwb_dev_LQE_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_beca_e *bce = uwb_dev->bce;
- size_t result;
-
- mutex_lock(&bce->mutex);
- result = stats_show(&uwb_dev->bce->lqe_stats, buf);
- mutex_unlock(&bce->mutex);
- return result;
-}
-
-static ssize_t uwb_dev_LQE_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_beca_e *bce = uwb_dev->bce;
- ssize_t result;
-
- mutex_lock(&bce->mutex);
- result = stats_store(&uwb_dev->bce->lqe_stats, buf, size);
- mutex_unlock(&bce->mutex);
- return result;
-}
-static DEVICE_ATTR(LQE, S_IRUGO | S_IWUSR, uwb_dev_LQE_show, uwb_dev_LQE_store);
-
-static ssize_t uwb_dev_RSSI_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_beca_e *bce = uwb_dev->bce;
- size_t result;
-
- mutex_lock(&bce->mutex);
- result = stats_show(&uwb_dev->bce->rssi_stats, buf);
- mutex_unlock(&bce->mutex);
- return result;
-}
-
-static ssize_t uwb_dev_RSSI_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_beca_e *bce = uwb_dev->bce;
- ssize_t result;
-
- mutex_lock(&bce->mutex);
- result = stats_store(&uwb_dev->bce->rssi_stats, buf, size);
- mutex_unlock(&bce->mutex);
- return result;
-}
-static DEVICE_ATTR(RSSI, S_IRUGO | S_IWUSR, uwb_dev_RSSI_show, uwb_dev_RSSI_store);
-
-
-static struct attribute *uwb_dev_attrs[] = {
- &dev_attr_EUI_48.attr,
- &dev_attr_DevAddr.attr,
- &dev_attr_BPST.attr,
- &dev_attr_IEs.attr,
- &dev_attr_LQE.attr,
- &dev_attr_RSSI.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(uwb_dev);
-
-/* UWB bus type. */
-struct bus_type uwb_bus_type = {
- .name = "uwb",
- .dev_groups = uwb_dev_groups,
-};
-
-/**
- * Device SYSFS registration
- */
-static int __uwb_dev_sys_add(struct uwb_dev *uwb_dev, struct device *parent_dev)
-{
- struct device *dev;
-
- dev = &uwb_dev->dev;
- dev->parent = parent_dev;
- dev_set_drvdata(dev, uwb_dev);
-
- return device_add(dev);
-}
-
-
-static void __uwb_dev_sys_rm(struct uwb_dev *uwb_dev)
-{
- dev_set_drvdata(&uwb_dev->dev, NULL);
- device_del(&uwb_dev->dev);
-}
-
-
-/**
- * Register and initialize a new UWB device
- *
- * Did you call uwb_dev_init() on it?
- *
- * @parent_rc: is the parent radio controller who has the link to the
- * device. When registering the UWB device that is a UWB
- * Radio Controller, we point back to it.
- *
- * If registering the device that is part of a radio, caller has set
- * rc->uwb_dev->dev. Otherwise it is to be left NULL--a new one will
- * be allocated.
- */
-int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev,
- struct uwb_rc *parent_rc)
-{
- int result;
- struct device *dev;
-
- BUG_ON(uwb_dev == NULL);
- BUG_ON(parent_dev == NULL);
- BUG_ON(parent_rc == NULL);
-
- mutex_lock(&uwb_dev->mutex);
- dev = &uwb_dev->dev;
- uwb_dev->rc = parent_rc;
- result = __uwb_dev_sys_add(uwb_dev, parent_dev);
- if (result < 0)
- printk(KERN_ERR "UWB: unable to register dev %s with sysfs: %d\n",
- dev_name(dev), result);
- mutex_unlock(&uwb_dev->mutex);
- return result;
-}
-
-
-void uwb_dev_rm(struct uwb_dev *uwb_dev)
-{
- mutex_lock(&uwb_dev->mutex);
- __uwb_dev_sys_rm(uwb_dev);
- mutex_unlock(&uwb_dev->mutex);
-}
-
-
-static
-int __uwb_dev_try_get(struct device *dev, void *__target_uwb_dev)
-{
- struct uwb_dev *target_uwb_dev = __target_uwb_dev;
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- if (uwb_dev == target_uwb_dev) {
- uwb_dev_get(uwb_dev);
- return 1;
- } else
- return 0;
-}
-
-
-/**
- * Given a UWB device descriptor, validate and refcount it
- *
- * @returns NULL if the device does not exist or is quiescing; the ptr to
- * it otherwise.
- */
-struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev)
-{
- if (uwb_dev_for_each(rc, __uwb_dev_try_get, uwb_dev))
- return uwb_dev;
- else
- return NULL;
-}
-EXPORT_SYMBOL_GPL(uwb_dev_try_get);
-
-
-/**
- * Remove a device from the system [grunt for other functions]
- */
-int __uwb_dev_offair(struct uwb_dev *uwb_dev, struct uwb_rc *rc)
-{
- struct device *dev = &uwb_dev->dev;
- char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
-
- uwb_mac_addr_print(macbuf, sizeof(macbuf), &uwb_dev->mac_addr);
- uwb_dev_addr_print(devbuf, sizeof(devbuf), &uwb_dev->dev_addr);
- dev_info(dev, "uwb device (mac %s dev %s) disconnected from %s %s\n",
- macbuf, devbuf,
- uwb_dev->dev.bus->name,
- rc ? dev_name(&(rc->uwb_dev.dev)) : "");
- uwb_dev_rm(uwb_dev);
- list_del(&uwb_dev->bce->node);
- uwb_bce_put(uwb_dev->bce);
- uwb_dev_put(uwb_dev); /* for the creation in _onair() */
-
- return 0;
-}
-
-
-/**
- * A device went off the air, clean up after it!
- *
- * This is called by the UWB Daemon (through the beacon purge function
- * uwb_bcn_cache_purge) when it is detected that a device has been in
- * radio silence for a while.
- *
- * If this device is actually a local radio controller we don't need
- * to go through the offair process, as it is not registered as that.
- *
- * NOTE: uwb_bcn_cache.mutex is held!
- */
-void uwbd_dev_offair(struct uwb_beca_e *bce)
-{
- struct uwb_dev *uwb_dev;
-
- uwb_dev = bce->uwb_dev;
- if (uwb_dev) {
- uwb_notify(uwb_dev->rc, uwb_dev, UWB_NOTIF_OFFAIR);
- __uwb_dev_offair(uwb_dev, uwb_dev->rc);
- }
-}
-
-
-/**
- * A device went on the air, start it up!
- *
- * This is called by the UWB Daemon when it is detected that a device
- * has popped up in the radio range of the radio controller.
- *
- * It will just create the freaking device, register the beacon and
- * stuff and yatla, done.
- *
- *
- * NOTE: uwb_beca.mutex is held, bce->mutex is held
- */
-void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
-{
- int result;
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_dev *uwb_dev;
- char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
-
- uwb_mac_addr_print(macbuf, sizeof(macbuf), bce->mac_addr);
- uwb_dev_addr_print(devbuf, sizeof(devbuf), &bce->dev_addr);
- uwb_dev = kzalloc(sizeof(struct uwb_dev), GFP_KERNEL);
- if (uwb_dev == NULL) {
- dev_err(dev, "new device %s: Cannot allocate memory\n",
- macbuf);
- return;
- }
- uwb_dev_init(uwb_dev); /* This sets refcnt to one, we own it */
- uwb_dev->dev.bus = &uwb_bus_type;
- uwb_dev->mac_addr = *bce->mac_addr;
- uwb_dev->dev_addr = bce->dev_addr;
- dev_set_name(&uwb_dev->dev, "%s", macbuf);
-
- /* plug the beacon cache */
- bce->uwb_dev = uwb_dev;
- uwb_dev->bce = bce;
- uwb_bce_get(bce); /* released in uwb_dev_sys_release() */
-
- result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc);
- if (result < 0) {
- dev_err(dev, "new device %s: cannot instantiate device\n",
- macbuf);
- goto error_dev_add;
- }
-
- dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n",
- macbuf, devbuf, uwb_dev->dev.bus->name,
- dev_name(&(rc->uwb_dev.dev)));
- uwb_notify(rc, uwb_dev, UWB_NOTIF_ONAIR);
- return;
-
-error_dev_add:
- bce->uwb_dev = NULL;
- uwb_bce_put(bce);
- kfree(uwb_dev);
- return;
-}
-
-/**
- * Iterate over the list of UWB devices, calling a @function on each
- *
- * See docs for bus_for_each()....
- *
- * @rc: radio controller for the devices.
- * @function: function to call.
- * @priv: data to pass to @function.
- * @returns: 0 if no invocation of function() returned a value
- * different to zero. That value otherwise.
- */
-int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f function, void *priv)
-{
- return device_for_each_child(&rc->uwb_dev.dev, priv, function);
-}
-EXPORT_SYMBOL_GPL(uwb_dev_for_each);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * Life cycle of radio controllers
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- *
- * A UWB radio controller is also a UWB device, so it embeds one...
- *
- * List of RCs comes from the 'struct class uwb_rc_class'.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/random.h>
-#include <linux/kdev_t.h>
-#include <linux/etherdevice.h>
-#include <linux/usb.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include "uwb-internal.h"
-
-static int uwb_rc_index_match(struct device *dev, const void *data)
-{
- const int *index = data;
- struct uwb_rc *rc = dev_get_drvdata(dev);
-
- if (rc->index == *index)
- return 1;
- return 0;
-}
-
-static struct uwb_rc *uwb_rc_find_by_index(int index)
-{
- struct device *dev;
- struct uwb_rc *rc = NULL;
-
- dev = class_find_device(&uwb_rc_class, NULL, &index, uwb_rc_index_match);
- if (dev) {
- rc = dev_get_drvdata(dev);
- put_device(dev);
- }
-
- return rc;
-}
-
-static int uwb_rc_new_index(void)
-{
- int index = 0;
-
- for (;;) {
- if (!uwb_rc_find_by_index(index))
- return index;
- if (++index < 0)
- index = 0;
- }
-}
-
-/**
- * Release the backing device of a uwb_rc that has been dynamically allocated.
- */
-static void uwb_rc_sys_release(struct device *dev)
-{
- struct uwb_dev *uwb_dev = container_of(dev, struct uwb_dev, dev);
- struct uwb_rc *rc = container_of(uwb_dev, struct uwb_rc, uwb_dev);
-
- uwb_rc_ie_release(rc);
- kfree(rc);
-}
-
-
-void uwb_rc_init(struct uwb_rc *rc)
-{
- struct uwb_dev *uwb_dev = &rc->uwb_dev;
-
- uwb_dev_init(uwb_dev);
- rc->uwb_dev.dev.class = &uwb_rc_class;
- rc->uwb_dev.dev.release = uwb_rc_sys_release;
- uwb_rc_neh_create(rc);
- rc->beaconing = -1;
- rc->scan_type = UWB_SCAN_DISABLED;
- INIT_LIST_HEAD(&rc->notifs_chain.list);
- mutex_init(&rc->notifs_chain.mutex);
- INIT_LIST_HEAD(&rc->uwb_beca.list);
- mutex_init(&rc->uwb_beca.mutex);
- uwb_drp_avail_init(rc);
- uwb_rc_ie_init(rc);
- uwb_rsv_init(rc);
- uwb_rc_pal_init(rc);
-}
-EXPORT_SYMBOL_GPL(uwb_rc_init);
-
-
-struct uwb_rc *uwb_rc_alloc(void)
-{
- struct uwb_rc *rc;
- rc = kzalloc(sizeof(*rc), GFP_KERNEL);
- if (rc == NULL)
- return NULL;
- uwb_rc_init(rc);
- return rc;
-}
-EXPORT_SYMBOL_GPL(uwb_rc_alloc);
-
-/*
- * Show the ASIE that is broadcast in the UWB beacon by this uwb_rc device.
- */
-static ssize_t ASIE_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_rc *rc = uwb_dev->rc;
- struct uwb_ie_hdr *ie;
- void *ptr;
- size_t len;
- int result = 0;
-
- /* init empty buffer. */
- result = scnprintf(buf, PAGE_SIZE, "\n");
- mutex_lock(&rc->ies_mutex);
- /* walk IEData looking for an ASIE. */
- ptr = rc->ies->IEData;
- len = le16_to_cpu(rc->ies->wIELength);
- for (;;) {
- ie = uwb_ie_next(&ptr, &len);
- if (!ie)
- break;
- if (ie->element_id == UWB_APP_SPEC_IE) {
- result = uwb_ie_dump_hex(ie,
- ie->length + sizeof(struct uwb_ie_hdr),
- buf, PAGE_SIZE);
- break;
- }
- }
- mutex_unlock(&rc->ies_mutex);
-
- return result;
-}
-
-/*
- * Update the ASIE that is broadcast in the UWB beacon by this uwb_rc device.
- */
-static ssize_t ASIE_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_rc *rc = uwb_dev->rc;
- char ie_buf[255];
- int result, ie_len = 0;
- const char *cur_ptr = buf;
- struct uwb_ie_hdr *ie;
-
- /* empty string means clear the ASIE. */
- if (strlen(buf) <= 1) {
- uwb_rc_ie_rm(rc, UWB_APP_SPEC_IE);
- return size;
- }
-
- /* if non-empty string, convert string of hex chars to binary. */
- while (ie_len < sizeof(ie_buf)) {
- int char_count;
-
- if (sscanf(cur_ptr, " %02hhX %n",
- &(ie_buf[ie_len]), &char_count) > 0) {
- ++ie_len;
- /* skip chars read from cur_ptr. */
- cur_ptr += char_count;
- } else {
- break;
- }
- }
-
- /* validate IE length and type. */
- if (ie_len < sizeof(struct uwb_ie_hdr)) {
- dev_err(dev, "%s: Invalid ASIE size %d.\n", __func__, ie_len);
- return -EINVAL;
- }
-
- ie = (struct uwb_ie_hdr *)ie_buf;
- if (ie->element_id != UWB_APP_SPEC_IE) {
- dev_err(dev, "%s: Invalid IE element type size = 0x%02X.\n",
- __func__, ie->element_id);
- return -EINVAL;
- }
-
- /* bounds check length field from user. */
- if (ie->length > (ie_len - sizeof(struct uwb_ie_hdr)))
- ie->length = ie_len - sizeof(struct uwb_ie_hdr);
-
- /*
- * Valid ASIE received. Remove current ASIE then add the new one using
- * uwb_rc_ie_add.
- */
- uwb_rc_ie_rm(rc, UWB_APP_SPEC_IE);
-
- result = uwb_rc_ie_add(rc, ie, ie->length + sizeof(struct uwb_ie_hdr));
-
- return result >= 0 ? size : result;
-}
-static DEVICE_ATTR_RW(ASIE);
-
-static struct attribute *rc_attrs[] = {
- &dev_attr_mac_address.attr,
- &dev_attr_scan.attr,
- &dev_attr_beacon.attr,
- &dev_attr_ASIE.attr,
- NULL,
-};
-
-static const struct attribute_group rc_attr_group = {
- .attrs = rc_attrs,
-};
-
-/*
- * Registration of sysfs specific stuff
- */
-static int uwb_rc_sys_add(struct uwb_rc *rc)
-{
- return sysfs_create_group(&rc->uwb_dev.dev.kobj, &rc_attr_group);
-}
-
-
-static void __uwb_rc_sys_rm(struct uwb_rc *rc)
-{
- sysfs_remove_group(&rc->uwb_dev.dev.kobj, &rc_attr_group);
-}
-
-/**
- * uwb_rc_mac_addr_setup - get an RC's EUI-48 address or set it
- * @rc: the radio controller.
- *
- * If the EUI-48 address is 00:00:00:00:00:00 or FF:FF:FF:FF:FF:FF
- * then a random locally administered EUI-48 is generated and set on
- * the device. The probability of address collisions is sufficiently
- * unlikely (1/2^40 = 9.1e-13) that they're not checked for.
- */
-static
-int uwb_rc_mac_addr_setup(struct uwb_rc *rc)
-{
- int result;
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_dev *uwb_dev = &rc->uwb_dev;
- char devname[UWB_ADDR_STRSIZE];
- struct uwb_mac_addr addr;
-
- result = uwb_rc_mac_addr_get(rc, &addr);
- if (result < 0) {
- dev_err(dev, "cannot retrieve UWB EUI-48 address: %d\n", result);
- return result;
- }
-
- if (uwb_mac_addr_unset(&addr) || uwb_mac_addr_bcast(&addr)) {
- addr.data[0] = 0x02; /* locally administered and unicast */
- get_random_bytes(&addr.data[1], sizeof(addr.data)-1);
-
- result = uwb_rc_mac_addr_set(rc, &addr);
- if (result < 0) {
- uwb_mac_addr_print(devname, sizeof(devname), &addr);
- dev_err(dev, "cannot set EUI-48 address %s: %d\n",
- devname, result);
- return result;
- }
- }
- uwb_dev->mac_addr = addr;
- return 0;
-}
-
-
-
-static int uwb_rc_setup(struct uwb_rc *rc)
-{
- int result;
- struct device *dev = &rc->uwb_dev.dev;
-
- result = uwb_radio_setup(rc);
- if (result < 0) {
- dev_err(dev, "cannot setup UWB radio: %d\n", result);
- goto error;
- }
- result = uwb_rc_mac_addr_setup(rc);
- if (result < 0) {
- dev_err(dev, "cannot setup UWB MAC address: %d\n", result);
- goto error;
- }
- result = uwb_rc_dev_addr_assign(rc);
- if (result < 0) {
- dev_err(dev, "cannot assign UWB DevAddr: %d\n", result);
- goto error;
- }
- result = uwb_rc_ie_setup(rc);
- if (result < 0) {
- dev_err(dev, "cannot setup IE subsystem: %d\n", result);
- goto error_ie_setup;
- }
- result = uwb_rsv_setup(rc);
- if (result < 0) {
- dev_err(dev, "cannot setup reservation subsystem: %d\n", result);
- goto error_rsv_setup;
- }
- uwb_dbg_add_rc(rc);
- return 0;
-
-error_rsv_setup:
- uwb_rc_ie_release(rc);
-error_ie_setup:
-error:
- return result;
-}
-
-
-/**
- * Register a new UWB radio controller
- *
- * Did you call uwb_rc_init() on your rc?
- *
- * We assume that this is being called with a > 0 refcount on
- * it [through ops->{get|put}_device(). We'll take our own, though.
- *
- * @parent_dev is our real device, the one that provides the actual UWB device
- */
-int uwb_rc_add(struct uwb_rc *rc, struct device *parent_dev, void *priv)
-{
- int result;
- struct device *dev;
- char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE];
-
- rc->index = uwb_rc_new_index();
-
- dev = &rc->uwb_dev.dev;
- dev_set_name(dev, "uwb%d", rc->index);
-
- rc->priv = priv;
-
- init_waitqueue_head(&rc->uwbd.wq);
- INIT_LIST_HEAD(&rc->uwbd.event_list);
- spin_lock_init(&rc->uwbd.event_list_lock);
-
- uwbd_start(rc);
-
- result = rc->start(rc);
- if (result < 0)
- goto error_rc_start;
-
- result = uwb_rc_setup(rc);
- if (result < 0) {
- dev_err(dev, "cannot setup UWB radio controller: %d\n", result);
- goto error_rc_setup;
- }
-
- result = uwb_dev_add(&rc->uwb_dev, parent_dev, rc);
- if (result < 0 && result != -EADDRNOTAVAIL)
- goto error_dev_add;
-
- result = uwb_rc_sys_add(rc);
- if (result < 0) {
- dev_err(parent_dev, "cannot register UWB radio controller "
- "dev attributes: %d\n", result);
- goto error_sys_add;
- }
-
- uwb_mac_addr_print(macbuf, sizeof(macbuf), &rc->uwb_dev.mac_addr);
- uwb_dev_addr_print(devbuf, sizeof(devbuf), &rc->uwb_dev.dev_addr);
- dev_info(dev,
- "new uwb radio controller (mac %s dev %s) on %s %s\n",
- macbuf, devbuf, parent_dev->bus->name, dev_name(parent_dev));
- rc->ready = 1;
- return 0;
-
-error_sys_add:
- uwb_dev_rm(&rc->uwb_dev);
-error_dev_add:
-error_rc_setup:
- rc->stop(rc);
-error_rc_start:
- uwbd_stop(rc);
- return result;
-}
-EXPORT_SYMBOL_GPL(uwb_rc_add);
-
-
-static int uwb_dev_offair_helper(struct device *dev, void *priv)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
-
- return __uwb_dev_offair(uwb_dev, uwb_dev->rc);
-}
-
-/*
- * Remove a Radio Controller; stop beaconing/scanning, disconnect all children
- */
-void uwb_rc_rm(struct uwb_rc *rc)
-{
- rc->ready = 0;
-
- uwb_dbg_del_rc(rc);
- uwb_rsv_remove_all(rc);
- uwb_radio_shutdown(rc);
-
- rc->stop(rc);
-
- uwbd_stop(rc);
- uwb_rc_neh_destroy(rc);
-
- uwb_dev_lock(&rc->uwb_dev);
- rc->priv = NULL;
- rc->cmd = NULL;
- uwb_dev_unlock(&rc->uwb_dev);
- mutex_lock(&rc->uwb_beca.mutex);
- uwb_dev_for_each(rc, uwb_dev_offair_helper, NULL);
- __uwb_rc_sys_rm(rc);
- mutex_unlock(&rc->uwb_beca.mutex);
- uwb_rsv_cleanup(rc);
- uwb_beca_release(rc);
- uwb_dev_rm(&rc->uwb_dev);
-}
-EXPORT_SYMBOL_GPL(uwb_rc_rm);
-
-static int find_rc_try_get(struct device *dev, const void *data)
-{
- const struct uwb_rc *target_rc = data;
- struct uwb_rc *rc = dev_get_drvdata(dev);
-
- if (rc == NULL) {
- WARN_ON(1);
- return 0;
- }
- if (rc == target_rc) {
- if (rc->ready == 0)
- return 0;
- else
- return 1;
- }
- return 0;
-}
-
-/**
- * Given a radio controller descriptor, validate and refcount it
- *
- * @returns NULL if the rc does not exist or is quiescing; the ptr to
- * it otherwise.
- */
-struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *target_rc)
-{
- struct device *dev;
- struct uwb_rc *rc = NULL;
-
- dev = class_find_device(&uwb_rc_class, NULL, target_rc,
- find_rc_try_get);
- if (dev) {
- rc = dev_get_drvdata(dev);
- __uwb_rc_get(rc);
- put_device(dev);
- }
-
- return rc;
-}
-EXPORT_SYMBOL_GPL(__uwb_rc_try_get);
-
-/*
- * RC get for external refcount acquirers...
- *
- * Increments the refcount of the device and it's backend modules
- */
-static inline struct uwb_rc *uwb_rc_get(struct uwb_rc *rc)
-{
- if (rc->ready == 0)
- return NULL;
- uwb_dev_get(&rc->uwb_dev);
- return rc;
-}
-
-static int find_rc_grandpa(struct device *dev, const void *data)
-{
- const struct device *grandpa_dev = data;
- struct uwb_rc *rc = dev_get_drvdata(dev);
-
- if (rc->uwb_dev.dev.parent->parent == grandpa_dev) {
- rc = uwb_rc_get(rc);
- return 1;
- }
- return 0;
-}
-
-/**
- * Locate and refcount a radio controller given a common grand-parent
- *
- * @grandpa_dev Pointer to the 'grandparent' device structure.
- * @returns NULL If the rc does not exist or is quiescing; the ptr to
- * it otherwise, properly referenced.
- *
- * The Radio Control interface (or the UWB Radio Controller) is always
- * an interface of a device. The parent is the interface, the
- * grandparent is the device that encapsulates the interface.
- *
- * There is no need to lock around as the "grandpa" would be
- * refcounted by the target, and to remove the referemes, the
- * uwb_rc_class->sem would have to be taken--we hold it, ergo we
- * should be safe.
- */
-struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *grandpa_dev)
-{
- struct device *dev;
- struct uwb_rc *rc = NULL;
-
- dev = class_find_device(&uwb_rc_class, NULL, grandpa_dev,
- find_rc_grandpa);
- if (dev) {
- rc = dev_get_drvdata(dev);
- put_device(dev);
- }
-
- return rc;
-}
-EXPORT_SYMBOL_GPL(uwb_rc_get_by_grandpa);
-
-/**
- * Find a radio controller by device address
- *
- * @returns the pointer to the radio controller, properly referenced
- */
-static int find_rc_dev(struct device *dev, const void *data)
-{
- const struct uwb_dev_addr *addr = data;
- struct uwb_rc *rc = dev_get_drvdata(dev);
-
- if (rc == NULL) {
- WARN_ON(1);
- return 0;
- }
- if (!uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, addr)) {
- rc = uwb_rc_get(rc);
- return 1;
- }
- return 0;
-}
-
-struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *addr)
-{
- struct device *dev;
- struct uwb_rc *rc = NULL;
-
- dev = class_find_device(&uwb_rc_class, NULL, addr, find_rc_dev);
- if (dev) {
- rc = dev_get_drvdata(dev);
- put_device(dev);
- }
-
- return rc;
-}
-EXPORT_SYMBOL_GPL(uwb_rc_get_by_dev);
-
-/**
- * Drop a reference on a radio controller
- *
- * This is the version that should be done by entities external to the
- * UWB Radio Control stack (ie: clients of the API).
- */
-void uwb_rc_put(struct uwb_rc *rc)
-{
- __uwb_rc_put(rc);
-}
-EXPORT_SYMBOL_GPL(uwb_rc_put);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * WUSB Wire Adapter: Radio Control Interface (WUSB[8])
- * Notification and Event Handling
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * The RC interface of the Host Wire Adapter (USB dongle) or WHCI PCI
- * card delivers a stream of notifications and events to the
- * notification end event endpoint or area. This code takes care of
- * getting a buffer with that data, breaking it up in separate
- * notifications and events and then deliver those.
- *
- * Events are answers to commands and they carry a context ID that
- * associates them to the command. Notifications are that,
- * notifications, they come out of the blue and have a context ID of
- * zero. Think of the context ID kind of like a handler. The
- * uwb_rc_neh_* code deals with managing context IDs.
- *
- * This is why you require a handle to operate on a UWB host. When you
- * open a handle a context ID is assigned to you.
- *
- * So, as it is done is:
- *
- * 1. Add an event handler [uwb_rc_neh_add()] (assigns a ctx id)
- * 2. Issue command [rc->cmd(rc, ...)]
- * 3. Arm the timeout timer [uwb_rc_neh_arm()]
- * 4, Release the reference to the neh [uwb_rc_neh_put()]
- * 5. Wait for the callback
- * 6. Command result (RCEB) is passed to the callback
- *
- * If (2) fails, you should remove the handle [uwb_rc_neh_rm()]
- * instead of arming the timer.
- *
- * Handles are for using in *serialized* code, single thread.
- *
- * When the notification/event comes, the IRQ handler/endpoint
- * callback passes the data read to uwb_rc_neh_grok() which will break
- * it up in a discrete series of events, look up who is listening for
- * them and execute the pertinent callbacks.
- *
- * If the reader detects an error while reading the data stream, call
- * uwb_rc_neh_error().
- *
- * CONSTRAINTS/ASSUMPTIONS:
- *
- * - Most notifications/events are small (less thank .5k), copying
- * around is ok.
- *
- * - Notifications/events are ALWAYS smaller than PAGE_SIZE
- *
- * - Notifications/events always come in a single piece (ie: a buffer
- * will always contain entire notifications/events).
- *
- * - we cannot know in advance how long each event is (because they
- * lack a length field in their header--smart move by the standards
- * body, btw). So we need a facility to get the event size given the
- * header. This is what the EST code does (notif/Event Size
- * Tables), check nest.c--as well, you can associate the size to
- * the handle [w/ neh->extra_size()].
- *
- * - Most notifications/events are fixed size; only a few are variable
- * size (NEST takes care of that).
- *
- * - Listeners of events expect them, so they usually provide a
- * buffer, as they know the size. Listeners to notifications don't,
- * so we allocate their buffers dynamically.
- */
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/export.h>
-
-#include "uwb-internal.h"
-
-/*
- * UWB Radio Controller Notification/Event Handle
- *
- * Represents an entity waiting for an event coming from the UWB Radio
- * Controller with a given context id (context) and type (evt_type and
- * evt). On reception of the notification/event, the callback (cb) is
- * called with the event.
- *
- * If the timer expires before the event is received, the callback is
- * called with -ETIMEDOUT as the event size.
- */
-struct uwb_rc_neh {
- struct kref kref;
-
- struct uwb_rc *rc;
- u8 evt_type;
- __le16 evt;
- u8 context;
- u8 completed;
- uwb_rc_cmd_cb_f cb;
- void *arg;
-
- struct timer_list timer;
- struct list_head list_node;
-};
-
-static void uwb_rc_neh_timer(struct timer_list *t);
-
-static void uwb_rc_neh_release(struct kref *kref)
-{
- struct uwb_rc_neh *neh = container_of(kref, struct uwb_rc_neh, kref);
-
- kfree(neh);
-}
-
-static void uwb_rc_neh_get(struct uwb_rc_neh *neh)
-{
- kref_get(&neh->kref);
-}
-
-/**
- * uwb_rc_neh_put - release reference to a neh
- * @neh: the neh
- */
-void uwb_rc_neh_put(struct uwb_rc_neh *neh)
-{
- kref_put(&neh->kref, uwb_rc_neh_release);
-}
-
-
-/**
- * Assigns @neh a context id from @rc's pool
- *
- * @rc: UWB Radio Controller descriptor; @rc->neh_lock taken
- * @neh: Notification/Event Handle
- * @returns 0 if context id was assigned ok; < 0 errno on error (if
- * all the context IDs are taken).
- *
- * (assumes @wa is locked).
- *
- * NOTE: WUSB spec reserves context ids 0x00 for notifications and
- * 0xff is invalid, so they must not be used. Initialization
- * fills up those two in the bitmap so they are not allocated.
- *
- * We spread the allocation around to reduce the possibility of two
- * consecutive opened @neh's getting the same context ID assigned (to
- * avoid surprises with late events that timed out long time ago). So
- * first we search from where @rc->ctx_roll is, if not found, we
- * search from zero.
- */
-static
-int __uwb_rc_ctx_get(struct uwb_rc *rc, struct uwb_rc_neh *neh)
-{
- int result;
- result = find_next_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX,
- rc->ctx_roll++);
- if (result < UWB_RC_CTX_MAX)
- goto found;
- result = find_first_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX);
- if (result < UWB_RC_CTX_MAX)
- goto found;
- return -ENFILE;
-found:
- set_bit(result, rc->ctx_bm);
- neh->context = result;
- return 0;
-}
-
-
-/** Releases @neh's context ID back to @rc (@rc->neh_lock is locked). */
-static
-void __uwb_rc_ctx_put(struct uwb_rc *rc, struct uwb_rc_neh *neh)
-{
- struct device *dev = &rc->uwb_dev.dev;
- if (neh->context == 0)
- return;
- if (test_bit(neh->context, rc->ctx_bm) == 0) {
- dev_err(dev, "context %u not set in bitmap\n",
- neh->context);
- WARN_ON(1);
- }
- clear_bit(neh->context, rc->ctx_bm);
- neh->context = 0;
-}
-
-/**
- * uwb_rc_neh_add - add a neh for a radio controller command
- * @rc: the radio controller
- * @cmd: the radio controller command
- * @expected_type: the type of the expected response event
- * @expected_event: the expected event ID
- * @cb: callback for when the event is received
- * @arg: argument for the callback
- *
- * Creates a neh and adds it to the list of those waiting for an
- * event. A context ID will be assigned to the command.
- */
-struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd,
- u8 expected_type, u16 expected_event,
- uwb_rc_cmd_cb_f cb, void *arg)
-{
- int result;
- unsigned long flags;
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_rc_neh *neh;
-
- neh = kzalloc(sizeof(*neh), GFP_KERNEL);
- if (neh == NULL) {
- result = -ENOMEM;
- goto error_kzalloc;
- }
-
- kref_init(&neh->kref);
- INIT_LIST_HEAD(&neh->list_node);
- timer_setup(&neh->timer, uwb_rc_neh_timer, 0);
-
- neh->rc = rc;
- neh->evt_type = expected_type;
- neh->evt = cpu_to_le16(expected_event);
- neh->cb = cb;
- neh->arg = arg;
-
- spin_lock_irqsave(&rc->neh_lock, flags);
- result = __uwb_rc_ctx_get(rc, neh);
- if (result >= 0) {
- cmd->bCommandContext = neh->context;
- list_add_tail(&neh->list_node, &rc->neh_list);
- uwb_rc_neh_get(neh);
- }
- spin_unlock_irqrestore(&rc->neh_lock, flags);
- if (result < 0)
- goto error_ctx_get;
-
- return neh;
-
-error_ctx_get:
- kfree(neh);
-error_kzalloc:
- dev_err(dev, "cannot open handle to radio controller: %d\n", result);
- return ERR_PTR(result);
-}
-
-static void __uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
-{
- __uwb_rc_ctx_put(rc, neh);
- list_del(&neh->list_node);
-}
-
-/**
- * uwb_rc_neh_rm - remove a neh.
- * @rc: the radio controller
- * @neh: the neh to remove
- *
- * Remove an active neh immediately instead of waiting for the event
- * (or a time out).
- */
-void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&rc->neh_lock, flags);
- __uwb_rc_neh_rm(rc, neh);
- spin_unlock_irqrestore(&rc->neh_lock, flags);
-
- del_timer_sync(&neh->timer);
- uwb_rc_neh_put(neh);
-}
-
-/**
- * uwb_rc_neh_arm - arm an event handler timeout timer
- *
- * @rc: UWB Radio Controller
- * @neh: Notification/event handler for @rc
- *
- * The timer is only armed if the neh is active.
- */
-void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&rc->neh_lock, flags);
- if (neh->context)
- mod_timer(&neh->timer,
- jiffies + msecs_to_jiffies(UWB_RC_CMD_TIMEOUT_MS));
- spin_unlock_irqrestore(&rc->neh_lock, flags);
-}
-
-static void uwb_rc_neh_cb(struct uwb_rc_neh *neh, struct uwb_rceb *rceb, size_t size)
-{
- (*neh->cb)(neh->rc, neh->arg, rceb, size);
- uwb_rc_neh_put(neh);
-}
-
-static bool uwb_rc_neh_match(struct uwb_rc_neh *neh, const struct uwb_rceb *rceb)
-{
- return neh->evt_type == rceb->bEventType
- && neh->evt == rceb->wEvent
- && neh->context == rceb->bEventContext;
-}
-
-/**
- * Find the handle waiting for a RC Radio Control Event
- *
- * @rc: UWB Radio Controller
- * @rceb: Pointer to the RCEB buffer
- * @event_size: Pointer to the size of the RCEB buffer. Might be
- * adjusted to take into account the @neh->extra_size
- * settings.
- *
- * If the listener has no buffer (NULL buffer), one is allocated for
- * the right size (the amount of data received). @neh->ptr will point
- * to the event payload, which always starts with a 'struct
- * uwb_rceb'. kfree() it when done.
- */
-static
-struct uwb_rc_neh *uwb_rc_neh_lookup(struct uwb_rc *rc,
- const struct uwb_rceb *rceb)
-{
- struct uwb_rc_neh *neh = NULL, *h;
- unsigned long flags;
-
- spin_lock_irqsave(&rc->neh_lock, flags);
-
- list_for_each_entry(h, &rc->neh_list, list_node) {
- if (uwb_rc_neh_match(h, rceb)) {
- neh = h;
- break;
- }
- }
-
- if (neh)
- __uwb_rc_neh_rm(rc, neh);
-
- spin_unlock_irqrestore(&rc->neh_lock, flags);
-
- return neh;
-}
-
-
-/*
- * Process notifications coming from the radio control interface
- *
- * @rc: UWB Radio Control Interface descriptor
- * @neh: Notification/Event Handler @neh->ptr points to
- * @uwb_evt->buffer.
- *
- * This function is called by the event/notif handling subsystem when
- * notifications arrive (hwarc_probe() arms a notification/event handle
- * that calls back this function for every received notification; this
- * function then will rearm itself).
- *
- * Notification data buffers are dynamically allocated by the NEH
- * handling code in neh.c [uwb_rc_neh_lookup()]. What is actually
- * allocated is space to contain the notification data.
- *
- * Buffers are prefixed with a Radio Control Event Block (RCEB) as
- * defined by the WUSB Wired-Adapter Radio Control interface. We
- * just use it for the notification code.
- *
- * On each case statement we just transcode endianess of the different
- * fields. We declare a pointer to a RCI definition of an event, and
- * then to a UWB definition of the same event (which are the same,
- * remember). Event if we use different pointers
- */
-static
-void uwb_rc_notif(struct uwb_rc *rc, struct uwb_rceb *rceb, ssize_t size)
-{
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_event *uwb_evt;
-
- if (size == -ESHUTDOWN)
- return;
- if (size < 0) {
- dev_err(dev, "ignoring event with error code %zu\n",
- size);
- return;
- }
-
- uwb_evt = kzalloc(sizeof(*uwb_evt), GFP_ATOMIC);
- if (unlikely(uwb_evt == NULL)) {
- dev_err(dev, "no memory to queue event 0x%02x/%04x/%02x\n",
- rceb->bEventType, le16_to_cpu(rceb->wEvent),
- rceb->bEventContext);
- return;
- }
- uwb_evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */
- uwb_evt->ts_jiffies = jiffies;
- uwb_evt->type = UWB_EVT_TYPE_NOTIF;
- uwb_evt->notif.size = size;
- uwb_evt->notif.rceb = rceb;
-
- uwbd_event_queue(uwb_evt);
-}
-
-static void uwb_rc_neh_grok_event(struct uwb_rc *rc, struct uwb_rceb *rceb, size_t size)
-{
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_rc_neh *neh;
- struct uwb_rceb *notif;
- unsigned long flags;
-
- if (rceb->bEventContext == 0) {
- notif = kmalloc(size, GFP_ATOMIC);
- if (notif) {
- memcpy(notif, rceb, size);
- uwb_rc_notif(rc, notif, size);
- } else
- dev_err(dev, "event 0x%02x/%04x/%02x (%zu bytes): no memory\n",
- rceb->bEventType, le16_to_cpu(rceb->wEvent),
- rceb->bEventContext, size);
- } else {
- neh = uwb_rc_neh_lookup(rc, rceb);
- if (neh) {
- spin_lock_irqsave(&rc->neh_lock, flags);
- /* to guard against a timeout */
- neh->completed = 1;
- del_timer(&neh->timer);
- spin_unlock_irqrestore(&rc->neh_lock, flags);
- uwb_rc_neh_cb(neh, rceb, size);
- } else
- dev_warn(dev, "event 0x%02x/%04x/%02x (%zu bytes): nobody cared\n",
- rceb->bEventType, le16_to_cpu(rceb->wEvent),
- rceb->bEventContext, size);
- }
-}
-
-/**
- * Given a buffer with one or more UWB RC events/notifications, break
- * them up and dispatch them.
- *
- * @rc: UWB Radio Controller
- * @buf: Buffer with the stream of notifications/events
- * @buf_size: Amount of data in the buffer
- *
- * Note each notification/event starts always with a 'struct
- * uwb_rceb', so the minimum size if 4 bytes.
- *
- * The device may pass us events formatted differently than expected.
- * These are first filtered, potentially creating a new event in a new
- * memory location. If a new event is created by the filter it is also
- * freed here.
- *
- * For each notif/event, tries to guess the size looking at the EST
- * tables, then looks for a neh that is waiting for that event and if
- * found, copies the payload to the neh's buffer and calls it back. If
- * not, the data is ignored.
- *
- * Note that if we can't find a size description in the EST tables, we
- * still might find a size in the 'neh' handle in uwb_rc_neh_lookup().
- *
- * Assumptions:
- *
- * @rc->neh_lock is NOT taken
- *
- * We keep track of various sizes here:
- * size: contains the size of the buffer that is processed for the
- * incoming event. this buffer may contain events that are not
- * formatted as WHCI.
- * real_size: the actual space taken by this event in the buffer.
- * We need to keep track of the real size of an event to be able to
- * advance the buffer correctly.
- * event_size: the size of the event as expected by the core layer
- * [OR] the size of the event after filtering. if the filtering
- * created a new event in a new memory location then this is
- * effectively the size of a new event buffer
- */
-void uwb_rc_neh_grok(struct uwb_rc *rc, void *buf, size_t buf_size)
-{
- struct device *dev = &rc->uwb_dev.dev;
- void *itr;
- struct uwb_rceb *rceb;
- size_t size, real_size, event_size;
- int needtofree;
-
- itr = buf;
- size = buf_size;
- while (size > 0) {
- if (size < sizeof(*rceb)) {
- dev_err(dev, "not enough data in event buffer to "
- "process incoming events (%zu left, minimum is "
- "%zu)\n", size, sizeof(*rceb));
- break;
- }
-
- rceb = itr;
- if (rc->filter_event) {
- needtofree = rc->filter_event(rc, &rceb, size,
- &real_size, &event_size);
- if (needtofree < 0 && needtofree != -ENOANO) {
- dev_err(dev, "BUG: Unable to filter event "
- "(0x%02x/%04x/%02x) from "
- "device. \n", rceb->bEventType,
- le16_to_cpu(rceb->wEvent),
- rceb->bEventContext);
- break;
- }
- } else
- needtofree = -ENOANO;
- /* do real processing if there was no filtering or the
- * filtering didn't act */
- if (needtofree == -ENOANO) {
- ssize_t ret = uwb_est_find_size(rc, rceb, size);
- if (ret < 0)
- break;
- if (ret > size) {
- dev_err(dev, "BUG: hw sent incomplete event "
- "0x%02x/%04x/%02x (%zd bytes), only got "
- "%zu bytes. We don't handle that.\n",
- rceb->bEventType, le16_to_cpu(rceb->wEvent),
- rceb->bEventContext, ret, size);
- break;
- }
- real_size = event_size = ret;
- }
- uwb_rc_neh_grok_event(rc, rceb, event_size);
-
- if (needtofree == 1)
- kfree(rceb);
-
- itr += real_size;
- size -= real_size;
- }
-}
-EXPORT_SYMBOL_GPL(uwb_rc_neh_grok);
-
-
-/**
- * The entity that reads from the device notification/event channel has
- * detected an error.
- *
- * @rc: UWB Radio Controller
- * @error: Errno error code
- *
- */
-void uwb_rc_neh_error(struct uwb_rc *rc, int error)
-{
- struct uwb_rc_neh *neh;
- unsigned long flags;
-
- for (;;) {
- spin_lock_irqsave(&rc->neh_lock, flags);
- if (list_empty(&rc->neh_list)) {
- spin_unlock_irqrestore(&rc->neh_lock, flags);
- break;
- }
- neh = list_first_entry(&rc->neh_list, struct uwb_rc_neh, list_node);
- __uwb_rc_neh_rm(rc, neh);
- spin_unlock_irqrestore(&rc->neh_lock, flags);
-
- del_timer_sync(&neh->timer);
- uwb_rc_neh_cb(neh, NULL, error);
- }
-}
-EXPORT_SYMBOL_GPL(uwb_rc_neh_error);
-
-
-static void uwb_rc_neh_timer(struct timer_list *t)
-{
- struct uwb_rc_neh *neh = from_timer(neh, t, timer);
- struct uwb_rc *rc = neh->rc;
- unsigned long flags;
-
- spin_lock_irqsave(&rc->neh_lock, flags);
- if (neh->completed) {
- spin_unlock_irqrestore(&rc->neh_lock, flags);
- return;
- }
- if (neh->context)
- __uwb_rc_neh_rm(rc, neh);
- else
- neh = NULL;
- spin_unlock_irqrestore(&rc->neh_lock, flags);
-
- if (neh)
- uwb_rc_neh_cb(neh, NULL, -ETIMEDOUT);
-}
-
-/** Initializes the @rc's neh subsystem
- */
-void uwb_rc_neh_create(struct uwb_rc *rc)
-{
- spin_lock_init(&rc->neh_lock);
- INIT_LIST_HEAD(&rc->neh_list);
- set_bit(0, rc->ctx_bm); /* 0 is reserved (see [WUSB] table 8-65) */
- set_bit(0xff, rc->ctx_bm); /* and 0xff is invalid */
- rc->ctx_roll = 1;
-}
-
-
-/** Release's the @rc's neh subsystem */
-void uwb_rc_neh_destroy(struct uwb_rc *rc)
-{
- unsigned long flags;
- struct uwb_rc_neh *neh;
-
- for (;;) {
- spin_lock_irqsave(&rc->neh_lock, flags);
- if (list_empty(&rc->neh_list)) {
- spin_unlock_irqrestore(&rc->neh_lock, flags);
- break;
- }
- neh = list_first_entry(&rc->neh_list, struct uwb_rc_neh, list_node);
- __uwb_rc_neh_rm(rc, neh);
- spin_unlock_irqrestore(&rc->neh_lock, flags);
-
- del_timer_sync(&neh->timer);
- uwb_rc_neh_put(neh);
- }
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * UWB PAL support.
- *
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/debugfs.h>
-#include <linux/export.h>
-
-#include "uwb.h"
-#include "uwb-internal.h"
-
-/**
- * uwb_pal_init - initialize a UWB PAL
- * @pal: the PAL to initialize
- */
-void uwb_pal_init(struct uwb_pal *pal)
-{
- INIT_LIST_HEAD(&pal->node);
-}
-EXPORT_SYMBOL_GPL(uwb_pal_init);
-
-/**
- * uwb_pal_register - register a UWB PAL
- * @pal: the PAL
- *
- * The PAL must be initialized with uwb_pal_init().
- */
-int uwb_pal_register(struct uwb_pal *pal)
-{
- struct uwb_rc *rc = pal->rc;
- int ret;
-
- if (pal->device) {
- /* create a link to the uwb_rc in the PAL device's directory. */
- ret = sysfs_create_link(&pal->device->kobj,
- &rc->uwb_dev.dev.kobj, "uwb_rc");
- if (ret < 0)
- return ret;
- /* create a link to the PAL in the UWB device's directory. */
- ret = sysfs_create_link(&rc->uwb_dev.dev.kobj,
- &pal->device->kobj, pal->name);
- if (ret < 0) {
- sysfs_remove_link(&pal->device->kobj, "uwb_rc");
- return ret;
- }
- }
-
- pal->debugfs_dir = uwb_dbg_create_pal_dir(pal);
-
- mutex_lock(&rc->uwb_dev.mutex);
- list_add(&pal->node, &rc->pals);
- mutex_unlock(&rc->uwb_dev.mutex);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(uwb_pal_register);
-
-static int find_rc(struct device *dev, const void *data)
-{
- const struct uwb_rc *target_rc = data;
- struct uwb_rc *rc = dev_get_drvdata(dev);
-
- if (rc == NULL) {
- WARN_ON(1);
- return 0;
- }
- if (rc == target_rc) {
- if (rc->ready == 0)
- return 0;
- else
- return 1;
- }
- return 0;
-}
-
-/**
- * Given a radio controller descriptor see if it is registered.
- *
- * @returns false if the rc does not exist or is quiescing; true otherwise.
- */
-static bool uwb_rc_class_device_exists(struct uwb_rc *target_rc)
-{
- struct device *dev;
-
- dev = class_find_device(&uwb_rc_class, NULL, target_rc, find_rc);
-
- put_device(dev);
-
- return (dev != NULL);
-}
-
-/**
- * uwb_pal_unregister - unregister a UWB PAL
- * @pal: the PAL
- */
-void uwb_pal_unregister(struct uwb_pal *pal)
-{
- struct uwb_rc *rc = pal->rc;
-
- uwb_radio_stop(pal);
-
- mutex_lock(&rc->uwb_dev.mutex);
- list_del(&pal->node);
- mutex_unlock(&rc->uwb_dev.mutex);
-
- debugfs_remove(pal->debugfs_dir);
-
- if (pal->device) {
- /* remove link to the PAL in the UWB device's directory. */
- if (uwb_rc_class_device_exists(rc))
- sysfs_remove_link(&rc->uwb_dev.dev.kobj, pal->name);
-
- /* remove link to uwb_rc in the PAL device's directory. */
- sysfs_remove_link(&pal->device->kobj, "uwb_rc");
- }
-}
-EXPORT_SYMBOL_GPL(uwb_pal_unregister);
-
-/**
- * uwb_rc_pal_init - initialize the PAL related parts of a radio controller
- * @rc: the radio controller
- */
-void uwb_rc_pal_init(struct uwb_rc *rc)
-{
- INIT_LIST_HEAD(&rc->pals);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * UWB radio (channel) management.
- *
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/export.h>
-
-#include "uwb.h"
-#include "uwb-internal.h"
-
-
-static int uwb_radio_select_channel(struct uwb_rc *rc)
-{
- /*
- * Default to channel 9 (BG1, TFC1) unless the user has
- * selected a specific channel or there are no active PALs.
- */
- if (rc->active_pals == 0)
- return -1;
- if (rc->beaconing_forced)
- return rc->beaconing_forced;
- return 9;
-}
-
-
-/*
- * Notify all active PALs that the channel has changed.
- */
-static void uwb_radio_channel_changed(struct uwb_rc *rc, int channel)
-{
- struct uwb_pal *pal;
-
- list_for_each_entry(pal, &rc->pals, node) {
- if (pal->channel && channel != pal->channel) {
- pal->channel = channel;
- if (pal->channel_changed)
- pal->channel_changed(pal, pal->channel);
- }
- }
-}
-
-/*
- * Change to a new channel and notify any active PALs of the new
- * channel.
- *
- * When stopping the radio, PALs need to be notified first so they can
- * terminate any active reservations.
- */
-static int uwb_radio_change_channel(struct uwb_rc *rc, int channel)
-{
- int ret = 0;
- struct device *dev = &rc->uwb_dev.dev;
-
- dev_dbg(dev, "%s: channel = %d, rc->beaconing = %d\n", __func__,
- channel, rc->beaconing);
-
- if (channel == -1)
- uwb_radio_channel_changed(rc, channel);
-
- if (channel != rc->beaconing) {
- if (rc->beaconing != -1 && channel != -1) {
- /*
- * FIXME: should signal the channel change
- * with a Channel Change IE.
- */
- ret = uwb_radio_change_channel(rc, -1);
- if (ret < 0)
- return ret;
- }
- ret = uwb_rc_beacon(rc, channel, 0);
- }
-
- if (channel != -1)
- uwb_radio_channel_changed(rc, rc->beaconing);
-
- return ret;
-}
-
-/**
- * uwb_radio_start - request that the radio be started
- * @pal: the PAL making the request.
- *
- * If the radio is not already active, a suitable channel is selected
- * and beacons are started.
- */
-int uwb_radio_start(struct uwb_pal *pal)
-{
- struct uwb_rc *rc = pal->rc;
- int ret = 0;
-
- mutex_lock(&rc->uwb_dev.mutex);
-
- if (!pal->channel) {
- pal->channel = -1;
- rc->active_pals++;
- ret = uwb_radio_change_channel(rc, uwb_radio_select_channel(rc));
- }
-
- mutex_unlock(&rc->uwb_dev.mutex);
- return ret;
-}
-EXPORT_SYMBOL_GPL(uwb_radio_start);
-
-/**
- * uwb_radio_stop - request that the radio be stopped.
- * @pal: the PAL making the request.
- *
- * Stops the radio if no other PAL is making use of it.
- */
-void uwb_radio_stop(struct uwb_pal *pal)
-{
- struct uwb_rc *rc = pal->rc;
-
- mutex_lock(&rc->uwb_dev.mutex);
-
- if (pal->channel) {
- rc->active_pals--;
- uwb_radio_change_channel(rc, uwb_radio_select_channel(rc));
- pal->channel = 0;
- }
-
- mutex_unlock(&rc->uwb_dev.mutex);
-}
-EXPORT_SYMBOL_GPL(uwb_radio_stop);
-
-/*
- * uwb_radio_force_channel - force a specific channel to be used
- * @rc: the radio controller.
- * @channel: the channel to use; -1 to force the radio to stop; 0 to
- * use the default channel selection algorithm.
- */
-int uwb_radio_force_channel(struct uwb_rc *rc, int channel)
-{
- int ret = 0;
-
- mutex_lock(&rc->uwb_dev.mutex);
-
- rc->beaconing_forced = channel;
- ret = uwb_radio_change_channel(rc, uwb_radio_select_channel(rc));
-
- mutex_unlock(&rc->uwb_dev.mutex);
- return ret;
-}
-
-/*
- * uwb_radio_setup - setup the radio manager
- * @rc: the radio controller.
- *
- * The radio controller is reset to ensure it's in a known state
- * before it's used.
- */
-int uwb_radio_setup(struct uwb_rc *rc)
-{
- return uwb_rc_reset(rc);
-}
-
-/*
- * uwb_radio_reset_state - reset any radio manager state
- * @rc: the radio controller.
- *
- * All internal radio manager state is reset to values corresponding
- * to a reset radio controller.
- */
-void uwb_radio_reset_state(struct uwb_rc *rc)
-{
- struct uwb_pal *pal;
-
- mutex_lock(&rc->uwb_dev.mutex);
-
- list_for_each_entry(pal, &rc->pals, node) {
- if (pal->channel) {
- pal->channel = -1;
- if (pal->channel_changed)
- pal->channel_changed(pal, -1);
- }
- }
-
- rc->beaconing = -1;
- rc->scanning = -1;
-
- mutex_unlock(&rc->uwb_dev.mutex);
-}
-
-/*
- * uwb_radio_shutdown - shutdown the radio manager
- * @rc: the radio controller.
- *
- * The radio controller is reset.
- */
-void uwb_radio_shutdown(struct uwb_rc *rc)
-{
- uwb_radio_reset_state(rc);
- uwb_rc_reset(rc);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * UWB basic command support and radio reset
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME:
- *
- * - docs
- *
- * - Now we are serializing (using the uwb_dev->mutex) the command
- * execution; it should be parallelized as much as possible some
- * day.
- */
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-
-#include "uwb-internal.h"
-
-/**
- * Command result codes (WUSB1.0[T8-69])
- */
-static
-const char *__strerror[] = {
- "success",
- "failure",
- "hardware failure",
- "no more slots",
- "beacon is too large",
- "invalid parameter",
- "unsupported power level",
- "time out (wa) or invalid ie data (whci)",
- "beacon size exceeded",
- "cancelled",
- "invalid state",
- "invalid size",
- "ack not received",
- "no more asie notification",
-};
-
-
-/** Return a string matching the given error code */
-const char *uwb_rc_strerror(unsigned code)
-{
- if (code == 255)
- return "time out";
- if (code >= ARRAY_SIZE(__strerror))
- return "unknown error";
- return __strerror[code];
-}
-
-int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
- struct uwb_rccb *cmd, size_t cmd_size,
- u8 expected_type, u16 expected_event,
- uwb_rc_cmd_cb_f cb, void *arg)
-{
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_rc_neh *neh;
- int needtofree = 0;
- int result;
-
- uwb_dev_lock(&rc->uwb_dev); /* Protect against rc->priv being removed */
- if (rc->priv == NULL) {
- uwb_dev_unlock(&rc->uwb_dev);
- return -ESHUTDOWN;
- }
-
- if (rc->filter_cmd) {
- needtofree = rc->filter_cmd(rc, &cmd, &cmd_size);
- if (needtofree < 0 && needtofree != -ENOANO) {
- dev_err(dev, "%s: filter error: %d\n",
- cmd_name, needtofree);
- uwb_dev_unlock(&rc->uwb_dev);
- return needtofree;
- }
- }
-
- neh = uwb_rc_neh_add(rc, cmd, expected_type, expected_event, cb, arg);
- if (IS_ERR(neh)) {
- result = PTR_ERR(neh);
- uwb_dev_unlock(&rc->uwb_dev);
- goto out;
- }
-
- result = rc->cmd(rc, cmd, cmd_size);
- uwb_dev_unlock(&rc->uwb_dev);
- if (result < 0)
- uwb_rc_neh_rm(rc, neh);
- else
- uwb_rc_neh_arm(rc, neh);
- uwb_rc_neh_put(neh);
-out:
- if (needtofree == 1)
- kfree(cmd);
- return result < 0 ? result : 0;
-}
-EXPORT_SYMBOL_GPL(uwb_rc_cmd_async);
-
-struct uwb_rc_cmd_done_params {
- struct completion completion;
- struct uwb_rceb *reply;
- ssize_t reply_size;
-};
-
-static void uwb_rc_cmd_done(struct uwb_rc *rc, void *arg,
- struct uwb_rceb *reply, ssize_t reply_size)
-{
- struct uwb_rc_cmd_done_params *p = (struct uwb_rc_cmd_done_params *)arg;
-
- if (reply_size > 0) {
- if (p->reply)
- reply_size = min(p->reply_size, reply_size);
- else
- p->reply = kmalloc(reply_size, GFP_ATOMIC);
-
- if (p->reply)
- memcpy(p->reply, reply, reply_size);
- else
- reply_size = -ENOMEM;
- }
- p->reply_size = reply_size;
- complete(&p->completion);
-}
-
-
-/**
- * Generic function for issuing commands to the Radio Control Interface
- *
- * @rc: UWB Radio Control descriptor
- * @cmd_name: Name of the command being issued (for error messages)
- * @cmd: Pointer to rccb structure containing the command;
- * normally you embed this structure as the first member of
- * the full command structure.
- * @cmd_size: Size of the whole command buffer pointed to by @cmd.
- * @reply: Pointer to where to store the reply
- * @reply_size: @reply's size
- * @expected_type: Expected type in the return event
- * @expected_event: Expected event code in the return event
- * @preply: Here a pointer to where the event data is received will
- * be stored. Once done with the data, free with kfree().
- *
- * This function is generic; it works for commands that return a fixed
- * and known size or for commands that return a variable amount of data.
- *
- * If a buffer is provided, that is used, although it could be chopped
- * to the maximum size of the buffer. If the buffer is NULL, then one
- * be allocated in *preply with the whole contents of the reply.
- *
- * @rc needs to be referenced
- */
-static
-ssize_t __uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
- struct uwb_rccb *cmd, size_t cmd_size,
- struct uwb_rceb *reply, size_t reply_size,
- u8 expected_type, u16 expected_event,
- struct uwb_rceb **preply)
-{
- ssize_t result = 0;
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_rc_cmd_done_params params;
-
- init_completion(¶ms.completion);
- params.reply = reply;
- params.reply_size = reply_size;
-
- result = uwb_rc_cmd_async(rc, cmd_name, cmd, cmd_size,
- expected_type, expected_event,
- uwb_rc_cmd_done, ¶ms);
- if (result)
- return result;
-
- wait_for_completion(¶ms.completion);
-
- if (preply)
- *preply = params.reply;
-
- if (params.reply_size < 0)
- dev_err(dev, "%s: confirmation event 0x%02x/%04x/%02x "
- "reception failed: %d\n", cmd_name,
- expected_type, expected_event, cmd->bCommandContext,
- (int)params.reply_size);
- return params.reply_size;
-}
-
-
-/**
- * Generic function for issuing commands to the Radio Control Interface
- *
- * @rc: UWB Radio Control descriptor
- * @cmd_name: Name of the command being issued (for error messages)
- * @cmd: Pointer to rccb structure containing the command;
- * normally you embed this structure as the first member of
- * the full command structure.
- * @cmd_size: Size of the whole command buffer pointed to by @cmd.
- * @reply: Pointer to the beginning of the confirmation event
- * buffer. Normally bigger than an 'struct hwarc_rceb'.
- * You need to fill out reply->bEventType and reply->wEvent (in
- * cpu order) as the function will use them to verify the
- * confirmation event.
- * @reply_size: Size of the reply buffer
- *
- * The function checks that the length returned in the reply is at
- * least as big as @reply_size; if not, it will be deemed an error and
- * -EIO returned.
- *
- * @rc needs to be referenced
- */
-ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
- struct uwb_rccb *cmd, size_t cmd_size,
- struct uwb_rceb *reply, size_t reply_size)
-{
- struct device *dev = &rc->uwb_dev.dev;
- ssize_t result;
-
- result = __uwb_rc_cmd(rc, cmd_name,
- cmd, cmd_size, reply, reply_size,
- reply->bEventType, reply->wEvent, NULL);
-
- if (result > 0 && result < reply_size) {
- dev_err(dev, "%s: not enough data returned for decoding reply "
- "(%zu bytes received vs at least %zu needed)\n",
- cmd_name, result, reply_size);
- result = -EIO;
- }
- return result;
-}
-EXPORT_SYMBOL_GPL(uwb_rc_cmd);
-
-
-/**
- * Generic function for issuing commands to the Radio Control
- * Interface that return an unknown amount of data
- *
- * @rc: UWB Radio Control descriptor
- * @cmd_name: Name of the command being issued (for error messages)
- * @cmd: Pointer to rccb structure containing the command;
- * normally you embed this structure as the first member of
- * the full command structure.
- * @cmd_size: Size of the whole command buffer pointed to by @cmd.
- * @expected_type: Expected type in the return event
- * @expected_event: Expected event code in the return event
- * @preply: Here a pointer to where the event data is received will
- * be stored. Once done with the data, free with kfree().
- *
- * The function checks that the length returned in the reply is at
- * least as big as a 'struct uwb_rceb *'; if not, it will be deemed an
- * error and -EIO returned.
- *
- * @rc needs to be referenced
- */
-ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name,
- struct uwb_rccb *cmd, size_t cmd_size,
- u8 expected_type, u16 expected_event,
- struct uwb_rceb **preply)
-{
- return __uwb_rc_cmd(rc, cmd_name, cmd, cmd_size, NULL, 0,
- expected_type, expected_event, preply);
-}
-EXPORT_SYMBOL_GPL(uwb_rc_vcmd);
-
-
-/**
- * Reset a UWB Host Controller (and all radio settings)
- *
- * @rc: Host Controller descriptor
- * @returns: 0 if ok, < 0 errno code on error
- *
- * We put the command on kmalloc'ed memory as some arches cannot do
- * USB from the stack. The reply event is copied from an stage buffer,
- * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
- */
-int uwb_rc_reset(struct uwb_rc *rc)
-{
- int result = -ENOMEM;
- struct uwb_rc_evt_confirm reply;
- struct uwb_rccb *cmd;
- size_t cmd_size = sizeof(*cmd);
-
- mutex_lock(&rc->uwb_dev.mutex);
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- goto error_kzalloc;
- cmd->bCommandType = UWB_RC_CET_GENERAL;
- cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET);
- reply.rceb.bEventType = UWB_RC_CET_GENERAL;
- reply.rceb.wEvent = UWB_RC_CMD_RESET;
- result = uwb_rc_cmd(rc, "RESET", cmd, cmd_size,
- &reply.rceb, sizeof(reply));
- if (result < 0)
- goto error_cmd;
- if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
- dev_err(&rc->uwb_dev.dev,
- "RESET: command execution failed: %s (%d)\n",
- uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
- result = -EIO;
- }
-error_cmd:
- kfree(cmd);
-error_kzalloc:
- mutex_unlock(&rc->uwb_dev.mutex);
- return result;
-}
-
-int uwbd_msg_handle_reset(struct uwb_event *evt)
-{
- struct uwb_rc *rc = evt->rc;
- int ret;
-
- dev_info(&rc->uwb_dev.dev, "resetting radio controller\n");
- ret = rc->reset(rc);
- if (ret < 0) {
- dev_err(&rc->uwb_dev.dev, "failed to reset hardware: %d\n", ret);
- goto error;
- }
- return 0;
-error:
- /* Nothing can be done except try the reset again. Wait a bit
- to avoid reset loops during probe() or remove(). */
- msleep(1000);
- uwb_rc_reset_all(rc);
- return ret;
-}
-
-/**
- * uwb_rc_reset_all - request a reset of the radio controller and PALs
- * @rc: the radio controller of the hardware device to be reset.
- *
- * The full hardware reset of the radio controller and all the PALs
- * will be scheduled.
- */
-void uwb_rc_reset_all(struct uwb_rc *rc)
-{
- struct uwb_event *evt;
-
- evt = kzalloc(sizeof(struct uwb_event), GFP_ATOMIC);
- if (unlikely(evt == NULL))
- return;
-
- evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */
- evt->ts_jiffies = jiffies;
- evt->type = UWB_EVT_TYPE_MSG;
- evt->message = UWB_EVT_MSG_RESET;
-
- uwbd_event_queue(evt);
-}
-EXPORT_SYMBOL_GPL(uwb_rc_reset_all);
-
-void uwb_rc_pre_reset(struct uwb_rc *rc)
-{
- rc->stop(rc);
- uwbd_flush(rc);
-
- uwb_radio_reset_state(rc);
- uwb_rsv_remove_all(rc);
-}
-EXPORT_SYMBOL_GPL(uwb_rc_pre_reset);
-
-int uwb_rc_post_reset(struct uwb_rc *rc)
-{
- int ret;
-
- ret = rc->start(rc);
- if (ret)
- goto out;
- ret = uwb_rc_mac_addr_set(rc, &rc->uwb_dev.mac_addr);
- if (ret)
- goto out;
- ret = uwb_rc_dev_addr_set(rc, &rc->uwb_dev.dev_addr);
- if (ret)
- goto out;
-out:
- return ret;
-}
-EXPORT_SYMBOL_GPL(uwb_rc_post_reset);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * UWB reservation management.
- *
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/export.h>
-
-#include "uwb.h"
-#include "uwb-internal.h"
-
-static void uwb_rsv_timer(struct timer_list *t);
-
-static const char *rsv_states[] = {
- [UWB_RSV_STATE_NONE] = "none ",
- [UWB_RSV_STATE_O_INITIATED] = "o initiated ",
- [UWB_RSV_STATE_O_PENDING] = "o pending ",
- [UWB_RSV_STATE_O_MODIFIED] = "o modified ",
- [UWB_RSV_STATE_O_ESTABLISHED] = "o established ",
- [UWB_RSV_STATE_O_TO_BE_MOVED] = "o to be moved ",
- [UWB_RSV_STATE_O_MOVE_EXPANDING] = "o move expanding",
- [UWB_RSV_STATE_O_MOVE_COMBINING] = "o move combining",
- [UWB_RSV_STATE_O_MOVE_REDUCING] = "o move reducing ",
- [UWB_RSV_STATE_T_ACCEPTED] = "t accepted ",
- [UWB_RSV_STATE_T_CONFLICT] = "t conflict ",
- [UWB_RSV_STATE_T_PENDING] = "t pending ",
- [UWB_RSV_STATE_T_DENIED] = "t denied ",
- [UWB_RSV_STATE_T_RESIZED] = "t resized ",
- [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = "t expanding acc ",
- [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = "t expanding conf",
- [UWB_RSV_STATE_T_EXPANDING_PENDING] = "t expanding pend",
- [UWB_RSV_STATE_T_EXPANDING_DENIED] = "t expanding den ",
-};
-
-static const char *rsv_types[] = {
- [UWB_DRP_TYPE_ALIEN_BP] = "alien-bp",
- [UWB_DRP_TYPE_HARD] = "hard",
- [UWB_DRP_TYPE_SOFT] = "soft",
- [UWB_DRP_TYPE_PRIVATE] = "private",
- [UWB_DRP_TYPE_PCA] = "pca",
-};
-
-bool uwb_rsv_has_two_drp_ies(struct uwb_rsv *rsv)
-{
- static const bool has_two_drp_ies[] = {
- [UWB_RSV_STATE_O_INITIATED] = false,
- [UWB_RSV_STATE_O_PENDING] = false,
- [UWB_RSV_STATE_O_MODIFIED] = false,
- [UWB_RSV_STATE_O_ESTABLISHED] = false,
- [UWB_RSV_STATE_O_TO_BE_MOVED] = false,
- [UWB_RSV_STATE_O_MOVE_COMBINING] = false,
- [UWB_RSV_STATE_O_MOVE_REDUCING] = false,
- [UWB_RSV_STATE_O_MOVE_EXPANDING] = true,
- [UWB_RSV_STATE_T_ACCEPTED] = false,
- [UWB_RSV_STATE_T_CONFLICT] = false,
- [UWB_RSV_STATE_T_PENDING] = false,
- [UWB_RSV_STATE_T_DENIED] = false,
- [UWB_RSV_STATE_T_RESIZED] = false,
- [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = true,
- [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = true,
- [UWB_RSV_STATE_T_EXPANDING_PENDING] = true,
- [UWB_RSV_STATE_T_EXPANDING_DENIED] = true,
- };
-
- return has_two_drp_ies[rsv->state];
-}
-
-/**
- * uwb_rsv_state_str - return a string for a reservation state
- * @state: the reservation state.
- */
-const char *uwb_rsv_state_str(enum uwb_rsv_state state)
-{
- if (state < UWB_RSV_STATE_NONE || state >= UWB_RSV_STATE_LAST)
- return "unknown";
- return rsv_states[state];
-}
-EXPORT_SYMBOL_GPL(uwb_rsv_state_str);
-
-/**
- * uwb_rsv_type_str - return a string for a reservation type
- * @type: the reservation type
- */
-const char *uwb_rsv_type_str(enum uwb_drp_type type)
-{
- if (type < UWB_DRP_TYPE_ALIEN_BP || type > UWB_DRP_TYPE_PCA)
- return "invalid";
- return rsv_types[type];
-}
-EXPORT_SYMBOL_GPL(uwb_rsv_type_str);
-
-void uwb_rsv_dump(char *text, struct uwb_rsv *rsv)
-{
- struct device *dev = &rsv->rc->uwb_dev.dev;
- struct uwb_dev_addr devaddr;
- char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE];
-
- uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr);
- if (rsv->target.type == UWB_RSV_TARGET_DEV)
- devaddr = rsv->target.dev->dev_addr;
- else
- devaddr = rsv->target.devaddr;
- uwb_dev_addr_print(target, sizeof(target), &devaddr);
-
- dev_dbg(dev, "rsv %s %s -> %s: %s\n",
- text, owner, target, uwb_rsv_state_str(rsv->state));
-}
-
-static void uwb_rsv_release(struct kref *kref)
-{
- struct uwb_rsv *rsv = container_of(kref, struct uwb_rsv, kref);
-
- kfree(rsv);
-}
-
-void uwb_rsv_get(struct uwb_rsv *rsv)
-{
- kref_get(&rsv->kref);
-}
-
-void uwb_rsv_put(struct uwb_rsv *rsv)
-{
- kref_put(&rsv->kref, uwb_rsv_release);
-}
-
-/*
- * Get a free stream index for a reservation.
- *
- * If the target is a DevAddr (e.g., a WUSB cluster reservation) then
- * the stream is allocated from a pool of per-RC stream indexes,
- * otherwise a unique stream index for the target is selected.
- */
-static int uwb_rsv_get_stream(struct uwb_rsv *rsv)
-{
- struct uwb_rc *rc = rsv->rc;
- struct device *dev = &rc->uwb_dev.dev;
- unsigned long *streams_bm;
- int stream;
-
- switch (rsv->target.type) {
- case UWB_RSV_TARGET_DEV:
- streams_bm = rsv->target.dev->streams;
- break;
- case UWB_RSV_TARGET_DEVADDR:
- streams_bm = rc->uwb_dev.streams;
- break;
- default:
- return -EINVAL;
- }
-
- stream = find_first_zero_bit(streams_bm, UWB_NUM_STREAMS);
- if (stream >= UWB_NUM_STREAMS) {
- dev_err(dev, "%s: no available stream found\n", __func__);
- return -EBUSY;
- }
-
- rsv->stream = stream;
- set_bit(stream, streams_bm);
-
- dev_dbg(dev, "get stream %d\n", rsv->stream);
-
- return 0;
-}
-
-static void uwb_rsv_put_stream(struct uwb_rsv *rsv)
-{
- struct uwb_rc *rc = rsv->rc;
- struct device *dev = &rc->uwb_dev.dev;
- unsigned long *streams_bm;
-
- switch (rsv->target.type) {
- case UWB_RSV_TARGET_DEV:
- streams_bm = rsv->target.dev->streams;
- break;
- case UWB_RSV_TARGET_DEVADDR:
- streams_bm = rc->uwb_dev.streams;
- break;
- default:
- return;
- }
-
- clear_bit(rsv->stream, streams_bm);
-
- dev_dbg(dev, "put stream %d\n", rsv->stream);
-}
-
-void uwb_rsv_backoff_win_timer(struct timer_list *t)
-{
- struct uwb_drp_backoff_win *bow = from_timer(bow, t, timer);
- struct uwb_rc *rc = container_of(bow, struct uwb_rc, bow);
- struct device *dev = &rc->uwb_dev.dev;
-
- bow->can_reserve_extra_mases = true;
- if (bow->total_expired <= 4) {
- bow->total_expired++;
- } else {
- /* after 4 backoff window has expired we can exit from
- * the backoff procedure */
- bow->total_expired = 0;
- bow->window = UWB_DRP_BACKOFF_WIN_MIN >> 1;
- }
- dev_dbg(dev, "backoff_win_timer total_expired=%d, n=%d\n", bow->total_expired, bow->n);
-
- /* try to relocate all the "to be moved" relocations */
- uwb_rsv_handle_drp_avail_change(rc);
-}
-
-void uwb_rsv_backoff_win_increment(struct uwb_rc *rc)
-{
- struct uwb_drp_backoff_win *bow = &rc->bow;
- struct device *dev = &rc->uwb_dev.dev;
- unsigned timeout_us;
-
- dev_dbg(dev, "backoff_win_increment: window=%d\n", bow->window);
-
- bow->can_reserve_extra_mases = false;
-
- if((bow->window << 1) == UWB_DRP_BACKOFF_WIN_MAX)
- return;
-
- bow->window <<= 1;
- bow->n = prandom_u32() & (bow->window - 1);
- dev_dbg(dev, "new_window=%d, n=%d\n", bow->window, bow->n);
-
- /* reset the timer associated variables */
- timeout_us = bow->n * UWB_SUPERFRAME_LENGTH_US;
- bow->total_expired = 0;
- mod_timer(&bow->timer, jiffies + usecs_to_jiffies(timeout_us));
-}
-
-static void uwb_rsv_stroke_timer(struct uwb_rsv *rsv)
-{
- int sframes = UWB_MAX_LOST_BEACONS;
-
- /*
- * Multicast reservations can become established within 1
- * super frame and should not be terminated if no response is
- * received.
- */
- if (rsv->state == UWB_RSV_STATE_NONE) {
- sframes = 0;
- } else if (rsv->is_multicast) {
- if (rsv->state == UWB_RSV_STATE_O_INITIATED
- || rsv->state == UWB_RSV_STATE_O_MOVE_EXPANDING
- || rsv->state == UWB_RSV_STATE_O_MOVE_COMBINING
- || rsv->state == UWB_RSV_STATE_O_MOVE_REDUCING)
- sframes = 1;
- if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED)
- sframes = 0;
-
- }
-
- if (sframes > 0) {
- /*
- * Add an additional 2 superframes to account for the
- * time to send the SET DRP IE command.
- */
- unsigned timeout_us = (sframes + 2) * UWB_SUPERFRAME_LENGTH_US;
- mod_timer(&rsv->timer, jiffies + usecs_to_jiffies(timeout_us));
- } else
- del_timer(&rsv->timer);
-}
-
-/*
- * Update a reservations state, and schedule an update of the
- * transmitted DRP IEs.
- */
-static void uwb_rsv_state_update(struct uwb_rsv *rsv,
- enum uwb_rsv_state new_state)
-{
- rsv->state = new_state;
- rsv->ie_valid = false;
-
- uwb_rsv_dump("SU", rsv);
-
- uwb_rsv_stroke_timer(rsv);
- uwb_rsv_sched_update(rsv->rc);
-}
-
-static void uwb_rsv_callback(struct uwb_rsv *rsv)
-{
- if (rsv->callback)
- rsv->callback(rsv);
-}
-
-void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state)
-{
- struct uwb_rsv_move *mv = &rsv->mv;
-
- if (rsv->state == new_state) {
- switch (rsv->state) {
- case UWB_RSV_STATE_O_ESTABLISHED:
- case UWB_RSV_STATE_O_MOVE_EXPANDING:
- case UWB_RSV_STATE_O_MOVE_COMBINING:
- case UWB_RSV_STATE_O_MOVE_REDUCING:
- case UWB_RSV_STATE_T_ACCEPTED:
- case UWB_RSV_STATE_T_EXPANDING_ACCEPTED:
- case UWB_RSV_STATE_T_RESIZED:
- case UWB_RSV_STATE_NONE:
- uwb_rsv_stroke_timer(rsv);
- break;
- default:
- /* Expecting a state transition so leave timer
- as-is. */
- break;
- }
- return;
- }
-
- uwb_rsv_dump("SC", rsv);
-
- switch (new_state) {
- case UWB_RSV_STATE_NONE:
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_NONE);
- uwb_rsv_remove(rsv);
- uwb_rsv_callback(rsv);
- break;
- case UWB_RSV_STATE_O_INITIATED:
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_INITIATED);
- break;
- case UWB_RSV_STATE_O_PENDING:
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_PENDING);
- break;
- case UWB_RSV_STATE_O_MODIFIED:
- /* in the companion there are the MASes to drop */
- bitmap_andnot(rsv->mas.bm, rsv->mas.bm, mv->companion_mas.bm, UWB_NUM_MAS);
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MODIFIED);
- break;
- case UWB_RSV_STATE_O_ESTABLISHED:
- if (rsv->state == UWB_RSV_STATE_O_MODIFIED
- || rsv->state == UWB_RSV_STATE_O_MOVE_REDUCING) {
- uwb_drp_avail_release(rsv->rc, &mv->companion_mas);
- rsv->needs_release_companion_mas = false;
- }
- uwb_drp_avail_reserve(rsv->rc, &rsv->mas);
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_ESTABLISHED);
- uwb_rsv_callback(rsv);
- break;
- case UWB_RSV_STATE_O_MOVE_EXPANDING:
- rsv->needs_release_companion_mas = true;
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING);
- break;
- case UWB_RSV_STATE_O_MOVE_COMBINING:
- rsv->needs_release_companion_mas = false;
- uwb_drp_avail_reserve(rsv->rc, &mv->companion_mas);
- bitmap_or(rsv->mas.bm, rsv->mas.bm, mv->companion_mas.bm, UWB_NUM_MAS);
- rsv->mas.safe += mv->companion_mas.safe;
- rsv->mas.unsafe += mv->companion_mas.unsafe;
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
- break;
- case UWB_RSV_STATE_O_MOVE_REDUCING:
- bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS);
- rsv->needs_release_companion_mas = true;
- rsv->mas.safe = mv->final_mas.safe;
- rsv->mas.unsafe = mv->final_mas.unsafe;
- bitmap_copy(rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS);
- bitmap_copy(rsv->mas.unsafe_bm, mv->final_mas.unsafe_bm, UWB_NUM_MAS);
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
- break;
- case UWB_RSV_STATE_T_ACCEPTED:
- case UWB_RSV_STATE_T_RESIZED:
- rsv->needs_release_companion_mas = false;
- uwb_drp_avail_reserve(rsv->rc, &rsv->mas);
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_ACCEPTED);
- uwb_rsv_callback(rsv);
- break;
- case UWB_RSV_STATE_T_DENIED:
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_DENIED);
- break;
- case UWB_RSV_STATE_T_CONFLICT:
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_CONFLICT);
- break;
- case UWB_RSV_STATE_T_PENDING:
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_PENDING);
- break;
- case UWB_RSV_STATE_T_EXPANDING_ACCEPTED:
- rsv->needs_release_companion_mas = true;
- uwb_drp_avail_reserve(rsv->rc, &mv->companion_mas);
- uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_EXPANDING_ACCEPTED);
- break;
- default:
- dev_err(&rsv->rc->uwb_dev.dev, "unhandled state: %s (%d)\n",
- uwb_rsv_state_str(new_state), new_state);
- }
-}
-
-static void uwb_rsv_handle_timeout_work(struct work_struct *work)
-{
- struct uwb_rsv *rsv = container_of(work, struct uwb_rsv,
- handle_timeout_work);
- struct uwb_rc *rc = rsv->rc;
-
- mutex_lock(&rc->rsvs_mutex);
-
- uwb_rsv_dump("TO", rsv);
-
- switch (rsv->state) {
- case UWB_RSV_STATE_O_INITIATED:
- if (rsv->is_multicast) {
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
- goto unlock;
- }
- break;
- case UWB_RSV_STATE_O_MOVE_EXPANDING:
- if (rsv->is_multicast) {
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING);
- goto unlock;
- }
- break;
- case UWB_RSV_STATE_O_MOVE_COMBINING:
- if (rsv->is_multicast) {
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING);
- goto unlock;
- }
- break;
- case UWB_RSV_STATE_O_MOVE_REDUCING:
- if (rsv->is_multicast) {
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED);
- goto unlock;
- }
- break;
- case UWB_RSV_STATE_O_ESTABLISHED:
- if (rsv->is_multicast)
- goto unlock;
- break;
- case UWB_RSV_STATE_T_EXPANDING_ACCEPTED:
- /*
- * The time out could be for the main or of the
- * companion DRP, assume it's for the companion and
- * drop that first. A further time out is required to
- * drop the main.
- */
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED);
- uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas);
- goto unlock;
- case UWB_RSV_STATE_NONE:
- goto unlock;
- default:
- break;
- }
-
- uwb_rsv_remove(rsv);
-
-unlock:
- mutex_unlock(&rc->rsvs_mutex);
-}
-
-static struct uwb_rsv *uwb_rsv_alloc(struct uwb_rc *rc)
-{
- struct uwb_rsv *rsv;
-
- rsv = kzalloc(sizeof(struct uwb_rsv), GFP_KERNEL);
- if (!rsv)
- return NULL;
-
- INIT_LIST_HEAD(&rsv->rc_node);
- INIT_LIST_HEAD(&rsv->pal_node);
- kref_init(&rsv->kref);
- timer_setup(&rsv->timer, uwb_rsv_timer, 0);
-
- rsv->rc = rc;
- INIT_WORK(&rsv->handle_timeout_work, uwb_rsv_handle_timeout_work);
-
- return rsv;
-}
-
-/**
- * uwb_rsv_create - allocate and initialize a UWB reservation structure
- * @rc: the radio controller
- * @cb: callback to use when the reservation completes or terminates
- * @pal_priv: data private to the PAL to be passed in the callback
- *
- * The callback is called when the state of the reservation changes from:
- *
- * - pending to accepted
- * - pending to denined
- * - accepted to terminated
- * - pending to terminated
- */
-struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb, void *pal_priv)
-{
- struct uwb_rsv *rsv;
-
- rsv = uwb_rsv_alloc(rc);
- if (!rsv)
- return NULL;
-
- rsv->callback = cb;
- rsv->pal_priv = pal_priv;
-
- return rsv;
-}
-EXPORT_SYMBOL_GPL(uwb_rsv_create);
-
-void uwb_rsv_remove(struct uwb_rsv *rsv)
-{
- uwb_rsv_dump("RM", rsv);
-
- if (rsv->state != UWB_RSV_STATE_NONE)
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
-
- if (rsv->needs_release_companion_mas)
- uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas);
- uwb_drp_avail_release(rsv->rc, &rsv->mas);
-
- if (uwb_rsv_is_owner(rsv))
- uwb_rsv_put_stream(rsv);
-
- uwb_dev_put(rsv->owner);
- if (rsv->target.type == UWB_RSV_TARGET_DEV)
- uwb_dev_put(rsv->target.dev);
-
- list_del_init(&rsv->rc_node);
- uwb_rsv_put(rsv);
-}
-
-/**
- * uwb_rsv_destroy - free a UWB reservation structure
- * @rsv: the reservation to free
- *
- * The reservation must already be terminated.
- */
-void uwb_rsv_destroy(struct uwb_rsv *rsv)
-{
- uwb_rsv_put(rsv);
-}
-EXPORT_SYMBOL_GPL(uwb_rsv_destroy);
-
-/**
- * usb_rsv_establish - start a reservation establishment
- * @rsv: the reservation
- *
- * The PAL should fill in @rsv's owner, target, type, max_mas,
- * min_mas, max_interval and is_multicast fields. If the target is a
- * uwb_dev it must be referenced.
- *
- * The reservation's callback will be called when the reservation is
- * accepted, denied or times out.
- */
-int uwb_rsv_establish(struct uwb_rsv *rsv)
-{
- struct uwb_rc *rc = rsv->rc;
- struct uwb_mas_bm available;
- struct device *dev = &rc->uwb_dev.dev;
- int ret;
-
- mutex_lock(&rc->rsvs_mutex);
- ret = uwb_rsv_get_stream(rsv);
- if (ret) {
- dev_err(dev, "%s: uwb_rsv_get_stream failed: %d\n",
- __func__, ret);
- goto out;
- }
-
- rsv->tiebreaker = prandom_u32() & 1;
- /* get available mas bitmap */
- uwb_drp_available(rc, &available);
-
- ret = uwb_rsv_find_best_allocation(rsv, &available, &rsv->mas);
- if (ret == UWB_RSV_ALLOC_NOT_FOUND) {
- ret = -EBUSY;
- uwb_rsv_put_stream(rsv);
- dev_err(dev, "%s: uwb_rsv_find_best_allocation failed: %d\n",
- __func__, ret);
- goto out;
- }
-
- ret = uwb_drp_avail_reserve_pending(rc, &rsv->mas);
- if (ret != 0) {
- uwb_rsv_put_stream(rsv);
- dev_err(dev, "%s: uwb_drp_avail_reserve_pending failed: %d\n",
- __func__, ret);
- goto out;
- }
-
- uwb_rsv_get(rsv);
- list_add_tail(&rsv->rc_node, &rc->reservations);
- rsv->owner = &rc->uwb_dev;
- uwb_dev_get(rsv->owner);
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_INITIATED);
-out:
- mutex_unlock(&rc->rsvs_mutex);
- return ret;
-}
-EXPORT_SYMBOL_GPL(uwb_rsv_establish);
-
-/**
- * uwb_rsv_modify - modify an already established reservation
- * @rsv: the reservation to modify
- * @max_mas: new maximum MAS to reserve
- * @min_mas: new minimum MAS to reserve
- * @max_interval: new max_interval to use
- *
- * FIXME: implement this once there are PALs that use it.
- */
-int uwb_rsv_modify(struct uwb_rsv *rsv, int max_mas, int min_mas, int max_interval)
-{
- return -ENOSYS;
-}
-EXPORT_SYMBOL_GPL(uwb_rsv_modify);
-
-/*
- * move an already established reservation (rc->rsvs_mutex must to be
- * taken when tis function is called)
- */
-int uwb_rsv_try_move(struct uwb_rsv *rsv, struct uwb_mas_bm *available)
-{
- struct uwb_rc *rc = rsv->rc;
- struct uwb_drp_backoff_win *bow = &rc->bow;
- struct device *dev = &rc->uwb_dev.dev;
- struct uwb_rsv_move *mv;
- int ret = 0;
-
- if (!bow->can_reserve_extra_mases)
- return -EBUSY;
-
- mv = &rsv->mv;
-
- if (uwb_rsv_find_best_allocation(rsv, available, &mv->final_mas) == UWB_RSV_ALLOC_FOUND) {
-
- if (!bitmap_equal(rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS)) {
- /* We want to move the reservation */
- bitmap_andnot(mv->companion_mas.bm, mv->final_mas.bm, rsv->mas.bm, UWB_NUM_MAS);
- uwb_drp_avail_reserve_pending(rc, &mv->companion_mas);
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING);
- }
- } else {
- dev_dbg(dev, "new allocation not found\n");
- }
-
- return ret;
-}
-
-/* It will try to move every reservation in state O_ESTABLISHED giving
- * to the MAS allocator algorithm an availability that is the real one
- * plus the allocation already established from the reservation. */
-void uwb_rsv_handle_drp_avail_change(struct uwb_rc *rc)
-{
- struct uwb_drp_backoff_win *bow = &rc->bow;
- struct uwb_rsv *rsv;
- struct uwb_mas_bm mas;
-
- if (!bow->can_reserve_extra_mases)
- return;
-
- list_for_each_entry(rsv, &rc->reservations, rc_node) {
- if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED ||
- rsv->state == UWB_RSV_STATE_O_TO_BE_MOVED) {
- uwb_drp_available(rc, &mas);
- bitmap_or(mas.bm, mas.bm, rsv->mas.bm, UWB_NUM_MAS);
- uwb_rsv_try_move(rsv, &mas);
- }
- }
-
-}
-
-/**
- * uwb_rsv_terminate - terminate an established reservation
- * @rsv: the reservation to terminate
- *
- * A reservation is terminated by removing the DRP IE from the beacon,
- * the other end will consider the reservation to be terminated when
- * it does not see the DRP IE for at least mMaxLostBeacons.
- *
- * If applicable, the reference to the target uwb_dev will be released.
- */
-void uwb_rsv_terminate(struct uwb_rsv *rsv)
-{
- struct uwb_rc *rc = rsv->rc;
-
- mutex_lock(&rc->rsvs_mutex);
-
- if (rsv->state != UWB_RSV_STATE_NONE)
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
-
- mutex_unlock(&rc->rsvs_mutex);
-}
-EXPORT_SYMBOL_GPL(uwb_rsv_terminate);
-
-/**
- * uwb_rsv_accept - accept a new reservation from a peer
- * @rsv: the reservation
- * @cb: call back for reservation changes
- * @pal_priv: data to be passed in the above call back
- *
- * Reservation requests from peers are denied unless a PAL accepts it
- * by calling this function.
- *
- * The PAL call uwb_rsv_destroy() for all accepted reservations before
- * calling uwb_pal_unregister().
- */
-void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv)
-{
- uwb_rsv_get(rsv);
-
- rsv->callback = cb;
- rsv->pal_priv = pal_priv;
- rsv->state = UWB_RSV_STATE_T_ACCEPTED;
-}
-EXPORT_SYMBOL_GPL(uwb_rsv_accept);
-
-/*
- * Is a received DRP IE for this reservation?
- */
-static bool uwb_rsv_match(struct uwb_rsv *rsv, struct uwb_dev *src,
- struct uwb_ie_drp *drp_ie)
-{
- struct uwb_dev_addr *rsv_src;
- int stream;
-
- stream = uwb_ie_drp_stream_index(drp_ie);
-
- if (rsv->stream != stream)
- return false;
-
- switch (rsv->target.type) {
- case UWB_RSV_TARGET_DEVADDR:
- return rsv->stream == stream;
- case UWB_RSV_TARGET_DEV:
- if (uwb_ie_drp_owner(drp_ie))
- rsv_src = &rsv->owner->dev_addr;
- else
- rsv_src = &rsv->target.dev->dev_addr;
- return uwb_dev_addr_cmp(&src->dev_addr, rsv_src) == 0;
- }
- return false;
-}
-
-static struct uwb_rsv *uwb_rsv_new_target(struct uwb_rc *rc,
- struct uwb_dev *src,
- struct uwb_ie_drp *drp_ie)
-{
- struct uwb_rsv *rsv;
- struct uwb_pal *pal;
- enum uwb_rsv_state state;
-
- rsv = uwb_rsv_alloc(rc);
- if (!rsv)
- return NULL;
-
- rsv->rc = rc;
- rsv->owner = src;
- uwb_dev_get(rsv->owner);
- rsv->target.type = UWB_RSV_TARGET_DEV;
- rsv->target.dev = &rc->uwb_dev;
- uwb_dev_get(&rc->uwb_dev);
- rsv->type = uwb_ie_drp_type(drp_ie);
- rsv->stream = uwb_ie_drp_stream_index(drp_ie);
- uwb_drp_ie_to_bm(&rsv->mas, drp_ie);
-
- /*
- * See if any PALs are interested in this reservation. If not,
- * deny the request.
- */
- rsv->state = UWB_RSV_STATE_T_DENIED;
- mutex_lock(&rc->uwb_dev.mutex);
- list_for_each_entry(pal, &rc->pals, node) {
- if (pal->new_rsv)
- pal->new_rsv(pal, rsv);
- if (rsv->state == UWB_RSV_STATE_T_ACCEPTED)
- break;
- }
- mutex_unlock(&rc->uwb_dev.mutex);
-
- list_add_tail(&rsv->rc_node, &rc->reservations);
- state = rsv->state;
- rsv->state = UWB_RSV_STATE_NONE;
-
- /* FIXME: do something sensible here */
- if (state == UWB_RSV_STATE_T_ACCEPTED
- && uwb_drp_avail_reserve_pending(rc, &rsv->mas) == -EBUSY) {
- /* FIXME: do something sensible here */
- } else {
- uwb_rsv_set_state(rsv, state);
- }
-
- return rsv;
-}
-
-/**
- * uwb_rsv_get_usable_mas - get the bitmap of the usable MAS of a reservations
- * @rsv: the reservation.
- * @mas: returns the available MAS.
- *
- * The usable MAS of a reservation may be less than the negotiated MAS
- * if alien BPs are present.
- */
-void uwb_rsv_get_usable_mas(struct uwb_rsv *rsv, struct uwb_mas_bm *mas)
-{
- bitmap_zero(mas->bm, UWB_NUM_MAS);
- bitmap_andnot(mas->bm, rsv->mas.bm, rsv->rc->cnflt_alien_bitmap.bm, UWB_NUM_MAS);
-}
-EXPORT_SYMBOL_GPL(uwb_rsv_get_usable_mas);
-
-/**
- * uwb_rsv_find - find a reservation for a received DRP IE.
- * @rc: the radio controller
- * @src: source of the DRP IE
- * @drp_ie: the DRP IE
- *
- * If the reservation cannot be found and the DRP IE is from a peer
- * attempting to establish a new reservation, create a new reservation
- * and add it to the list.
- */
-struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src,
- struct uwb_ie_drp *drp_ie)
-{
- struct uwb_rsv *rsv;
-
- list_for_each_entry(rsv, &rc->reservations, rc_node) {
- if (uwb_rsv_match(rsv, src, drp_ie))
- return rsv;
- }
-
- if (uwb_ie_drp_owner(drp_ie))
- return uwb_rsv_new_target(rc, src, drp_ie);
-
- return NULL;
-}
-
-/*
- * Go through all the reservations and check for timeouts and (if
- * necessary) update their DRP IEs.
- *
- * FIXME: look at building the SET_DRP_IE command here rather than
- * having to rescan the list in uwb_rc_send_all_drp_ie().
- */
-static bool uwb_rsv_update_all(struct uwb_rc *rc)
-{
- struct uwb_rsv *rsv, *t;
- bool ie_updated = false;
-
- list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
- if (!rsv->ie_valid) {
- uwb_drp_ie_update(rsv);
- ie_updated = true;
- }
- }
-
- return ie_updated;
-}
-
-void uwb_rsv_queue_update(struct uwb_rc *rc)
-{
- unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE;
-
- queue_delayed_work(rc->rsv_workq, &rc->rsv_update_work, usecs_to_jiffies(delay_us));
-}
-
-/**
- * uwb_rsv_sched_update - schedule an update of the DRP IEs
- * @rc: the radio controller.
- *
- * To improve performance and ensure correctness with [ECMA-368] the
- * number of SET-DRP-IE commands that are done are limited.
- *
- * DRP IEs update come from two sources: DRP events from the hardware
- * which all occur at the beginning of the superframe ('syncronous'
- * events) and reservation establishment/termination requests from
- * PALs or timers ('asynchronous' events).
- *
- * A delayed work ensures that all the synchronous events result in
- * one SET-DRP-IE command.
- *
- * Additional logic (the set_drp_ie_pending and rsv_updated_postponed
- * flags) will prevent an asynchrous event starting a SET-DRP-IE
- * command if one is currently awaiting a response.
- *
- * FIXME: this does leave a window where an asynchrous event can delay
- * the SET-DRP-IE for a synchronous event by one superframe.
- */
-void uwb_rsv_sched_update(struct uwb_rc *rc)
-{
- spin_lock_irq(&rc->rsvs_lock);
- if (!delayed_work_pending(&rc->rsv_update_work)) {
- if (rc->set_drp_ie_pending > 0) {
- rc->set_drp_ie_pending++;
- goto unlock;
- }
- uwb_rsv_queue_update(rc);
- }
-unlock:
- spin_unlock_irq(&rc->rsvs_lock);
-}
-
-/*
- * Update DRP IEs and, if necessary, the DRP Availability IE and send
- * the updated IEs to the radio controller.
- */
-static void uwb_rsv_update_work(struct work_struct *work)
-{
- struct uwb_rc *rc = container_of(work, struct uwb_rc,
- rsv_update_work.work);
- bool ie_updated;
-
- mutex_lock(&rc->rsvs_mutex);
-
- ie_updated = uwb_rsv_update_all(rc);
-
- if (!rc->drp_avail.ie_valid) {
- uwb_drp_avail_ie_update(rc);
- ie_updated = true;
- }
-
- if (ie_updated && (rc->set_drp_ie_pending == 0))
- uwb_rc_send_all_drp_ie(rc);
-
- mutex_unlock(&rc->rsvs_mutex);
-}
-
-static void uwb_rsv_alien_bp_work(struct work_struct *work)
-{
- struct uwb_rc *rc = container_of(work, struct uwb_rc,
- rsv_alien_bp_work.work);
- struct uwb_rsv *rsv;
-
- mutex_lock(&rc->rsvs_mutex);
-
- list_for_each_entry(rsv, &rc->reservations, rc_node) {
- if (rsv->type != UWB_DRP_TYPE_ALIEN_BP) {
- uwb_rsv_callback(rsv);
- }
- }
-
- mutex_unlock(&rc->rsvs_mutex);
-}
-
-static void uwb_rsv_timer(struct timer_list *t)
-{
- struct uwb_rsv *rsv = from_timer(rsv, t, timer);
-
- queue_work(rsv->rc->rsv_workq, &rsv->handle_timeout_work);
-}
-
-/**
- * uwb_rsv_remove_all - remove all reservations
- * @rc: the radio controller
- *
- * A DRP IE update is not done.
- */
-void uwb_rsv_remove_all(struct uwb_rc *rc)
-{
- struct uwb_rsv *rsv, *t;
-
- mutex_lock(&rc->rsvs_mutex);
- list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
- if (rsv->state != UWB_RSV_STATE_NONE)
- uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE);
- del_timer_sync(&rsv->timer);
- }
- /* Cancel any postponed update. */
- rc->set_drp_ie_pending = 0;
- mutex_unlock(&rc->rsvs_mutex);
-
- cancel_delayed_work_sync(&rc->rsv_update_work);
- flush_workqueue(rc->rsv_workq);
-
- mutex_lock(&rc->rsvs_mutex);
- list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) {
- uwb_rsv_remove(rsv);
- }
- mutex_unlock(&rc->rsvs_mutex);
-}
-
-void uwb_rsv_init(struct uwb_rc *rc)
-{
- INIT_LIST_HEAD(&rc->reservations);
- INIT_LIST_HEAD(&rc->cnflt_alien_list);
- mutex_init(&rc->rsvs_mutex);
- spin_lock_init(&rc->rsvs_lock);
- INIT_DELAYED_WORK(&rc->rsv_update_work, uwb_rsv_update_work);
- INIT_DELAYED_WORK(&rc->rsv_alien_bp_work, uwb_rsv_alien_bp_work);
- rc->bow.can_reserve_extra_mases = true;
- rc->bow.total_expired = 0;
- rc->bow.window = UWB_DRP_BACKOFF_WIN_MIN >> 1;
- timer_setup(&rc->bow.timer, uwb_rsv_backoff_win_timer, 0);
-
- bitmap_complement(rc->uwb_dev.streams, rc->uwb_dev.streams, UWB_NUM_STREAMS);
-}
-
-int uwb_rsv_setup(struct uwb_rc *rc)
-{
- char name[16];
-
- snprintf(name, sizeof(name), "%s_rsvd", dev_name(&rc->uwb_dev.dev));
- rc->rsv_workq = create_singlethread_workqueue(name);
- if (rc->rsv_workq == NULL)
- return -ENOMEM;
-
- return 0;
-}
-
-void uwb_rsv_cleanup(struct uwb_rc *rc)
-{
- uwb_rsv_remove_all(rc);
- destroy_workqueue(rc->rsv_workq);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * Scanning management
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- * FIXME: there are issues here on how BEACON and SCAN on USB RCI deal
- * with each other. Currently seems that START_BEACON while
- * SCAN_ONLY will cancel the scan, so we need to update the
- * state here. Clarification request sent by email on
- * 10/05/2005.
- * 10/28/2005 No clear answer heard--maybe we'll hack the API
- * so that when we start beaconing, if the HC is
- * scanning in a mode not compatible with beaconing
- * we just fail.
- */
-
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include "uwb-internal.h"
-
-
-/**
- * Start/stop scanning in a radio controller
- *
- * @rc: UWB Radio Controller
- * @channel: Channel to scan; encodings in WUSB1.0[Table 5.12]
- * @type: Type of scanning to do.
- * @bpst_offset: value at which to start scanning (if type ==
- * UWB_SCAN_ONLY_STARTTIME)
- * @returns: 0 if ok, < 0 errno code on error
- *
- * We put the command on kmalloc'ed memory as some arches cannot do
- * USB from the stack. The reply event is copied from an stage buffer,
- * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
- */
-int uwb_rc_scan(struct uwb_rc *rc,
- unsigned channel, enum uwb_scan_type type,
- unsigned bpst_offset)
-{
- int result;
- struct uwb_rc_cmd_scan *cmd;
- struct uwb_rc_evt_confirm reply;
-
- result = -ENOMEM;
- cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
- if (cmd == NULL)
- goto error_kzalloc;
- mutex_lock(&rc->uwb_dev.mutex);
- cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
- cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SCAN);
- cmd->bChannelNumber = channel;
- cmd->bScanState = type;
- cmd->wStartTime = cpu_to_le16(bpst_offset);
- reply.rceb.bEventType = UWB_RC_CET_GENERAL;
- reply.rceb.wEvent = UWB_RC_CMD_SCAN;
- result = uwb_rc_cmd(rc, "SCAN", &cmd->rccb, sizeof(*cmd),
- &reply.rceb, sizeof(reply));
- if (result < 0)
- goto error_cmd;
- if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
- dev_err(&rc->uwb_dev.dev,
- "SCAN: command execution failed: %s (%d)\n",
- uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
- result = -EIO;
- goto error_cmd;
- }
- rc->scanning = channel;
- rc->scan_type = type;
-error_cmd:
- mutex_unlock(&rc->uwb_dev.mutex);
- kfree(cmd);
-error_kzalloc:
- return result;
-}
-
-/*
- * Print scanning state
- */
-static ssize_t uwb_rc_scan_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_rc *rc = uwb_dev->rc;
- ssize_t result;
-
- mutex_lock(&rc->uwb_dev.mutex);
- result = sprintf(buf, "%d %d\n", rc->scanning, rc->scan_type);
- mutex_unlock(&rc->uwb_dev.mutex);
- return result;
-}
-
-/*
- *
- */
-static ssize_t uwb_rc_scan_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct uwb_dev *uwb_dev = to_uwb_dev(dev);
- struct uwb_rc *rc = uwb_dev->rc;
- unsigned channel;
- unsigned type;
- unsigned bpst_offset = 0;
- ssize_t result = -EINVAL;
-
- result = sscanf(buf, "%u %u %u\n", &channel, &type, &bpst_offset);
- if (result >= 2 && type < UWB_SCAN_TOP)
- result = uwb_rc_scan(rc, channel, type, bpst_offset);
-
- return result < 0 ? result : size;
-}
-
-/** Radio Control sysfs interface (declaration) */
-DEVICE_ATTR(scan, S_IRUGO | S_IWUSR, uwb_rc_scan_show, uwb_rc_scan_store);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Bus for UWB Multi-interface Controller capabilities.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/sysfs.h>
-#include <linux/workqueue.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include "include/umc.h"
-
-static int umc_bus_pre_reset_helper(struct device *dev, void *data)
-{
- int ret = 0;
-
- if (dev->driver) {
- struct umc_dev *umc = to_umc_dev(dev);
- struct umc_driver *umc_drv = to_umc_driver(dev->driver);
-
- if (umc_drv->pre_reset)
- ret = umc_drv->pre_reset(umc);
- else
- device_release_driver(dev);
- }
- return ret;
-}
-
-static int umc_bus_post_reset_helper(struct device *dev, void *data)
-{
- int ret = 0;
-
- if (dev->driver) {
- struct umc_dev *umc = to_umc_dev(dev);
- struct umc_driver *umc_drv = to_umc_driver(dev->driver);
-
- if (umc_drv->post_reset)
- ret = umc_drv->post_reset(umc);
- } else
- ret = device_attach(dev);
-
- return ret;
-}
-
-/**
- * umc_controller_reset - reset the whole UMC controller
- * @umc: the UMC device for the radio controller.
- *
- * Drivers or all capabilities of the controller will have their
- * pre_reset methods called or be unbound from their device. Then all
- * post_reset methods will be called or the drivers will be rebound.
- *
- * Radio controllers must provide pre_reset and post_reset methods and
- * reset the hardware in their start method.
- *
- * If this is called while a probe() or remove() is in progress it
- * will return -EAGAIN and not perform the reset.
- */
-int umc_controller_reset(struct umc_dev *umc)
-{
- struct device *parent = umc->dev.parent;
- int ret = 0;
-
- if (!device_trylock(parent))
- return -EAGAIN;
- ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper);
- if (ret >= 0)
- ret = device_for_each_child(parent, parent, umc_bus_post_reset_helper);
- device_unlock(parent);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(umc_controller_reset);
-
-/**
- * umc_match_pci_id - match a UMC driver to a UMC device's parent PCI device.
- * @umc_drv: umc driver with match_data pointing to a zero-terminated
- * table of pci_device_id's.
- * @umc: umc device whose parent is to be matched.
- */
-int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc)
-{
- const struct pci_device_id *id_table = umc_drv->match_data;
- struct pci_dev *pci;
-
- if (!dev_is_pci(umc->dev.parent))
- return 0;
-
- pci = to_pci_dev(umc->dev.parent);
- return pci_match_id(id_table, pci) != NULL;
-}
-EXPORT_SYMBOL_GPL(umc_match_pci_id);
-
-static int umc_bus_rescan_helper(struct device *dev, void *data)
-{
- int ret = 0;
-
- if (!dev->driver)
- ret = device_attach(dev);
-
- return ret;
-}
-
-static void umc_bus_rescan(struct device *parent)
-{
- int err;
-
- /*
- * We can't use bus_rescan_devices() here as it deadlocks when
- * it tries to retake the dev->parent semaphore.
- */
- err = device_for_each_child(parent, NULL, umc_bus_rescan_helper);
- if (err < 0)
- printk(KERN_WARNING "%s: rescan of bus failed: %d\n",
- KBUILD_MODNAME, err);
-}
-
-static int umc_bus_match(struct device *dev, struct device_driver *drv)
-{
- struct umc_dev *umc = to_umc_dev(dev);
- struct umc_driver *umc_driver = to_umc_driver(drv);
-
- if (umc->cap_id == umc_driver->cap_id) {
- if (umc_driver->match)
- return umc_driver->match(umc_driver, umc);
- else
- return 1;
- }
- return 0;
-}
-
-static int umc_device_probe(struct device *dev)
-{
- struct umc_dev *umc;
- struct umc_driver *umc_driver;
- int err;
-
- umc_driver = to_umc_driver(dev->driver);
- umc = to_umc_dev(dev);
-
- get_device(dev);
- err = umc_driver->probe(umc);
- if (err)
- put_device(dev);
- else
- umc_bus_rescan(dev->parent);
-
- return err;
-}
-
-static int umc_device_remove(struct device *dev)
-{
- struct umc_dev *umc;
- struct umc_driver *umc_driver;
-
- umc_driver = to_umc_driver(dev->driver);
- umc = to_umc_dev(dev);
-
- umc_driver->remove(umc);
- put_device(dev);
- return 0;
-}
-
-static ssize_t capability_id_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct umc_dev *umc = to_umc_dev(dev);
-
- return sprintf(buf, "0x%02x\n", umc->cap_id);
-}
-static DEVICE_ATTR_RO(capability_id);
-
-static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct umc_dev *umc = to_umc_dev(dev);
-
- return sprintf(buf, "0x%04x\n", umc->version);
-}
-static DEVICE_ATTR_RO(version);
-
-static struct attribute *umc_dev_attrs[] = {
- &dev_attr_capability_id.attr,
- &dev_attr_version.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(umc_dev);
-
-struct bus_type umc_bus_type = {
- .name = "umc",
- .match = umc_bus_match,
- .probe = umc_device_probe,
- .remove = umc_device_remove,
- .dev_groups = umc_dev_groups,
-};
-EXPORT_SYMBOL_GPL(umc_bus_type);
-
-static int __init umc_bus_init(void)
-{
- return bus_register(&umc_bus_type);
-}
-module_init(umc_bus_init);
-
-static void __exit umc_bus_exit(void)
-{
- bus_unregister(&umc_bus_type);
-}
-module_exit(umc_bus_exit);
-
-MODULE_DESCRIPTION("UWB Multi-interface Controller capability bus");
-MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
-MODULE_LICENSE("GPL");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * UWB Multi-interface Controller device management.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/slab.h>
-#include "include/umc.h"
-
-static void umc_device_release(struct device *dev)
-{
- struct umc_dev *umc = to_umc_dev(dev);
-
- kfree(umc);
-}
-
-/**
- * umc_device_create - allocate a child UMC device
- * @parent: parent of the new UMC device.
- * @n: index of the new device.
- *
- * The new UMC device will have a bus ID of the parent with '-n'
- * appended.
- */
-struct umc_dev *umc_device_create(struct device *parent, int n)
-{
- struct umc_dev *umc;
-
- umc = kzalloc(sizeof(struct umc_dev), GFP_KERNEL);
- if (umc) {
- dev_set_name(&umc->dev, "%s-%d", dev_name(parent), n);
- umc->dev.parent = parent;
- umc->dev.bus = &umc_bus_type;
- umc->dev.release = umc_device_release;
-
- umc->dev.dma_mask = parent->dma_mask;
- }
- return umc;
-}
-EXPORT_SYMBOL_GPL(umc_device_create);
-
-/**
- * umc_device_register - register a UMC device
- * @umc: pointer to the UMC device
- *
- * The memory resource for the UMC device is acquired and the device
- * registered with the system.
- */
-int umc_device_register(struct umc_dev *umc)
-{
- int err;
-
- err = request_resource(umc->resource.parent, &umc->resource);
- if (err < 0) {
- dev_err(&umc->dev, "can't allocate resource range %pR: %d\n",
- &umc->resource, err);
- goto error_request_resource;
- }
-
- err = device_register(&umc->dev);
- if (err < 0)
- goto error_device_register;
- return 0;
-
-error_device_register:
- put_device(&umc->dev);
- release_resource(&umc->resource);
-error_request_resource:
- return err;
-}
-EXPORT_SYMBOL_GPL(umc_device_register);
-
-/**
- * umc_device_unregister - unregister a UMC device
- * @umc: pointer to the UMC device
- *
- * First we unregister the device, make sure the driver can do it's
- * resource release thing and then we try to release any left over
- * resources. We take a ref to the device, to make sure it doesn't
- * disappear under our feet.
- */
-void umc_device_unregister(struct umc_dev *umc)
-{
- struct device *dev;
- if (!umc)
- return;
- dev = get_device(&umc->dev);
- device_unregister(&umc->dev);
- release_resource(&umc->resource);
- put_device(dev);
-}
-EXPORT_SYMBOL_GPL(umc_device_unregister);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * UWB Multi-interface Controller driver management.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include "include/umc.h"
-
-int __umc_driver_register(struct umc_driver *umc_drv, struct module *module,
- const char *mod_name)
-{
- umc_drv->driver.name = umc_drv->name;
- umc_drv->driver.owner = module;
- umc_drv->driver.mod_name = mod_name;
- umc_drv->driver.bus = &umc_bus_type;
-
- return driver_register(&umc_drv->driver);
-}
-EXPORT_SYMBOL_GPL(__umc_driver_register);
-
-/**
- * umc_driver_register - unregister a UMC capabiltity driver.
- * @umc_drv: pointer to the driver.
- */
-void umc_driver_unregister(struct umc_driver *umc_drv)
-{
- driver_unregister(&umc_drv->driver);
-}
-EXPORT_SYMBOL_GPL(umc_driver_unregister);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * Debug support
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- *
- * FIXME: doc
- */
-
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/notifier.h>
-#include <linux/device.h>
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>
-#include <linux/seq_file.h>
-
-#include "include/debug-cmd.h"
-#include "uwb-internal.h"
-
-/*
- * Debug interface
- *
- * Per radio controller debugfs files (in uwb/uwbN/):
- *
- * command: Flexible command interface (see <linux/uwb/debug-cmd.h>).
- *
- * reservations: information on reservations.
- *
- * accept: Set to true (Y or 1) to accept reservation requests from
- * peers.
- *
- * drp_avail: DRP availability information.
- */
-
-struct uwb_dbg {
- struct uwb_pal pal;
-
- bool accept;
- struct list_head rsvs;
-
- struct dentry *root_d;
- struct dentry *command_f;
- struct dentry *reservations_f;
- struct dentry *accept_f;
- struct dentry *drp_avail_f;
- spinlock_t list_lock;
-};
-
-static struct dentry *root_dir;
-
-static void uwb_dbg_rsv_cb(struct uwb_rsv *rsv)
-{
- struct uwb_dbg *dbg = rsv->pal_priv;
-
- uwb_rsv_dump("debug", rsv);
-
- if (rsv->state == UWB_RSV_STATE_NONE) {
- spin_lock(&dbg->list_lock);
- list_del(&rsv->pal_node);
- spin_unlock(&dbg->list_lock);
- uwb_rsv_destroy(rsv);
- }
-}
-
-static int cmd_rsv_establish(struct uwb_rc *rc,
- struct uwb_dbg_cmd_rsv_establish *cmd)
-{
- struct uwb_mac_addr macaddr;
- struct uwb_rsv *rsv;
- struct uwb_dev *target;
- int ret;
-
- memcpy(&macaddr, cmd->target, sizeof(macaddr));
- target = uwb_dev_get_by_macaddr(rc, &macaddr);
- if (target == NULL)
- return -ENODEV;
-
- rsv = uwb_rsv_create(rc, uwb_dbg_rsv_cb, rc->dbg);
- if (rsv == NULL) {
- uwb_dev_put(target);
- return -ENOMEM;
- }
-
- rsv->target.type = UWB_RSV_TARGET_DEV;
- rsv->target.dev = target;
- rsv->type = cmd->type;
- rsv->max_mas = cmd->max_mas;
- rsv->min_mas = cmd->min_mas;
- rsv->max_interval = cmd->max_interval;
-
- ret = uwb_rsv_establish(rsv);
- if (ret)
- uwb_rsv_destroy(rsv);
- else {
- spin_lock(&(rc->dbg)->list_lock);
- list_add_tail(&rsv->pal_node, &rc->dbg->rsvs);
- spin_unlock(&(rc->dbg)->list_lock);
- }
- return ret;
-}
-
-static int cmd_rsv_terminate(struct uwb_rc *rc,
- struct uwb_dbg_cmd_rsv_terminate *cmd)
-{
- struct uwb_rsv *rsv, *found = NULL;
- int i = 0;
-
- spin_lock(&(rc->dbg)->list_lock);
-
- list_for_each_entry(rsv, &rc->dbg->rsvs, pal_node) {
- if (i == cmd->index) {
- found = rsv;
- uwb_rsv_get(found);
- break;
- }
- i++;
- }
-
- spin_unlock(&(rc->dbg)->list_lock);
-
- if (!found)
- return -EINVAL;
-
- uwb_rsv_terminate(found);
- uwb_rsv_put(found);
-
- return 0;
-}
-
-static int cmd_ie_add(struct uwb_rc *rc, struct uwb_dbg_cmd_ie *ie_to_add)
-{
- return uwb_rc_ie_add(rc,
- (const struct uwb_ie_hdr *) ie_to_add->data,
- ie_to_add->len);
-}
-
-static int cmd_ie_rm(struct uwb_rc *rc, struct uwb_dbg_cmd_ie *ie_to_rm)
-{
- return uwb_rc_ie_rm(rc, ie_to_rm->data[0]);
-}
-
-static ssize_t command_write(struct file *file, const char __user *buf,
- size_t len, loff_t *off)
-{
- struct uwb_rc *rc = file->private_data;
- struct uwb_dbg_cmd cmd;
- int ret = 0;
-
- if (len != sizeof(struct uwb_dbg_cmd))
- return -EINVAL;
-
- if (copy_from_user(&cmd, buf, len) != 0)
- return -EFAULT;
-
- switch (cmd.type) {
- case UWB_DBG_CMD_RSV_ESTABLISH:
- ret = cmd_rsv_establish(rc, &cmd.rsv_establish);
- break;
- case UWB_DBG_CMD_RSV_TERMINATE:
- ret = cmd_rsv_terminate(rc, &cmd.rsv_terminate);
- break;
- case UWB_DBG_CMD_IE_ADD:
- ret = cmd_ie_add(rc, &cmd.ie_add);
- break;
- case UWB_DBG_CMD_IE_RM:
- ret = cmd_ie_rm(rc, &cmd.ie_rm);
- break;
- case UWB_DBG_CMD_RADIO_START:
- ret = uwb_radio_start(&rc->dbg->pal);
- break;
- case UWB_DBG_CMD_RADIO_STOP:
- uwb_radio_stop(&rc->dbg->pal);
- break;
- default:
- return -EINVAL;
- }
-
- return ret < 0 ? ret : len;
-}
-
-static const struct file_operations command_fops = {
- .open = simple_open,
- .write = command_write,
- .read = NULL,
- .llseek = no_llseek,
- .owner = THIS_MODULE,
-};
-
-static int reservations_show(struct seq_file *s, void *p)
-{
- struct uwb_rc *rc = s->private;
- struct uwb_rsv *rsv;
-
- mutex_lock(&rc->rsvs_mutex);
-
- list_for_each_entry(rsv, &rc->reservations, rc_node) {
- struct uwb_dev_addr devaddr;
- char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE];
- bool is_owner;
-
- uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr);
- if (rsv->target.type == UWB_RSV_TARGET_DEV) {
- devaddr = rsv->target.dev->dev_addr;
- is_owner = &rc->uwb_dev == rsv->owner;
- } else {
- devaddr = rsv->target.devaddr;
- is_owner = true;
- }
- uwb_dev_addr_print(target, sizeof(target), &devaddr);
-
- seq_printf(s, "%c %s -> %s: %s\n",
- is_owner ? 'O' : 'T',
- owner, target, uwb_rsv_state_str(rsv->state));
- seq_printf(s, " stream: %d type: %s\n",
- rsv->stream, uwb_rsv_type_str(rsv->type));
- seq_printf(s, " %*pb\n", UWB_NUM_MAS, rsv->mas.bm);
- }
-
- mutex_unlock(&rc->rsvs_mutex);
-
- return 0;
-}
-DEFINE_SHOW_ATTRIBUTE(reservations);
-
-static int drp_avail_show(struct seq_file *s, void *p)
-{
- struct uwb_rc *rc = s->private;
-
- seq_printf(s, "global: %*pb\n", UWB_NUM_MAS, rc->drp_avail.global);
- seq_printf(s, "local: %*pb\n", UWB_NUM_MAS, rc->drp_avail.local);
- seq_printf(s, "pending: %*pb\n", UWB_NUM_MAS, rc->drp_avail.pending);
-
- return 0;
-}
-DEFINE_SHOW_ATTRIBUTE(drp_avail);
-
-static void uwb_dbg_channel_changed(struct uwb_pal *pal, int channel)
-{
- struct device *dev = &pal->rc->uwb_dev.dev;
-
- if (channel > 0)
- dev_info(dev, "debug: channel %d started\n", channel);
- else
- dev_info(dev, "debug: channel stopped\n");
-}
-
-static void uwb_dbg_new_rsv(struct uwb_pal *pal, struct uwb_rsv *rsv)
-{
- struct uwb_dbg *dbg = container_of(pal, struct uwb_dbg, pal);
-
- if (dbg->accept) {
- spin_lock(&dbg->list_lock);
- list_add_tail(&rsv->pal_node, &dbg->rsvs);
- spin_unlock(&dbg->list_lock);
- uwb_rsv_accept(rsv, uwb_dbg_rsv_cb, dbg);
- }
-}
-
-/**
- * uwb_dbg_add_rc - add a debug interface for a radio controller
- * @rc: the radio controller
- */
-void uwb_dbg_add_rc(struct uwb_rc *rc)
-{
- rc->dbg = kzalloc(sizeof(struct uwb_dbg), GFP_KERNEL);
- if (rc->dbg == NULL)
- return;
-
- INIT_LIST_HEAD(&rc->dbg->rsvs);
- spin_lock_init(&(rc->dbg)->list_lock);
-
- uwb_pal_init(&rc->dbg->pal);
- rc->dbg->pal.rc = rc;
- rc->dbg->pal.channel_changed = uwb_dbg_channel_changed;
- rc->dbg->pal.new_rsv = uwb_dbg_new_rsv;
- uwb_pal_register(&rc->dbg->pal);
-
- if (root_dir) {
- rc->dbg->root_d = debugfs_create_dir(dev_name(&rc->uwb_dev.dev),
- root_dir);
- rc->dbg->command_f = debugfs_create_file("command", 0200,
- rc->dbg->root_d, rc,
- &command_fops);
- rc->dbg->reservations_f = debugfs_create_file("reservations", 0444,
- rc->dbg->root_d, rc,
- &reservations_fops);
- rc->dbg->accept_f = debugfs_create_bool("accept", 0644,
- rc->dbg->root_d,
- &rc->dbg->accept);
- rc->dbg->drp_avail_f = debugfs_create_file("drp_avail", 0444,
- rc->dbg->root_d, rc,
- &drp_avail_fops);
- }
-}
-
-/**
- * uwb_dbg_del_rc - remove a radio controller's debug interface
- * @rc: the radio controller
- */
-void uwb_dbg_del_rc(struct uwb_rc *rc)
-{
- struct uwb_rsv *rsv, *t;
-
- if (rc->dbg == NULL)
- return;
-
- list_for_each_entry_safe(rsv, t, &rc->dbg->rsvs, pal_node) {
- uwb_rsv_terminate(rsv);
- }
-
- uwb_pal_unregister(&rc->dbg->pal);
-
- if (root_dir) {
- debugfs_remove(rc->dbg->drp_avail_f);
- debugfs_remove(rc->dbg->accept_f);
- debugfs_remove(rc->dbg->reservations_f);
- debugfs_remove(rc->dbg->command_f);
- debugfs_remove(rc->dbg->root_d);
- }
-}
-
-/**
- * uwb_dbg_exit - initialize the debug interface sub-module
- */
-void uwb_dbg_init(void)
-{
- root_dir = debugfs_create_dir("uwb", NULL);
-}
-
-/**
- * uwb_dbg_exit - clean-up the debug interface sub-module
- */
-void uwb_dbg_exit(void)
-{
- debugfs_remove(root_dir);
-}
-
-/**
- * uwb_dbg_create_pal_dir - create a debugfs directory for a PAL
- * @pal: The PAL.
- */
-struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal)
-{
- struct uwb_rc *rc = pal->rc;
-
- if (root_dir && rc->dbg && rc->dbg->root_d && pal->name)
- return debugfs_create_dir(pal->name, rc->dbg->root_d);
- return NULL;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Ultra Wide Band
- * UWB internal API
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This contains most of the internal API for UWB. This is stuff used
- * across the stack that of course, is of no interest to the rest.
- *
- * Some parts might end up going public (like uwb_rc_*())...
- */
-
-#ifndef __UWB_INTERNAL_H__
-#define __UWB_INTERNAL_H__
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include "uwb.h"
-
-struct uwb_beca_e;
-
-/* General device API */
-extern void uwb_dev_init(struct uwb_dev *uwb_dev);
-extern int __uwb_dev_offair(struct uwb_dev *, struct uwb_rc *);
-extern int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev,
- struct uwb_rc *parent_rc);
-extern void uwb_dev_rm(struct uwb_dev *uwb_dev);
-extern void uwbd_dev_onair(struct uwb_rc *, struct uwb_beca_e *);
-extern void uwbd_dev_offair(struct uwb_beca_e *);
-void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event);
-
-/* General UWB Radio Controller Internal API */
-extern struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *);
-static inline struct uwb_rc *__uwb_rc_get(struct uwb_rc *rc)
-{
- uwb_dev_get(&rc->uwb_dev);
- return rc;
-}
-
-static inline void __uwb_rc_put(struct uwb_rc *rc)
-{
- if (rc)
- uwb_dev_put(&rc->uwb_dev);
-}
-
-extern int uwb_rc_reset(struct uwb_rc *rc);
-extern int uwb_rc_beacon(struct uwb_rc *rc,
- int channel, unsigned bpst_offset);
-extern int uwb_rc_scan(struct uwb_rc *rc,
- unsigned channel, enum uwb_scan_type type,
- unsigned bpst_offset);
-extern int uwb_rc_send_all_drp_ie(struct uwb_rc *rc);
-
-void uwb_rc_ie_init(struct uwb_rc *);
-int uwb_rc_ie_setup(struct uwb_rc *);
-void uwb_rc_ie_release(struct uwb_rc *);
-int uwb_ie_dump_hex(const struct uwb_ie_hdr *ies, size_t len,
- char *buf, size_t size);
-int uwb_rc_set_ie(struct uwb_rc *, struct uwb_rc_cmd_set_ie *);
-
-
-extern const char *uwb_rc_strerror(unsigned code);
-
-/*
- * Time to wait for a response to an RC command.
- *
- * Some commands can take a long time to response. e.g., START_BEACON
- * may scan for several superframes before joining an existing beacon
- * group and this can take around 600 ms.
- */
-#define UWB_RC_CMD_TIMEOUT_MS 1000 /* ms */
-
-/*
- * Notification/Event Handlers
- */
-
-struct uwb_rc_neh;
-
-extern int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
- struct uwb_rccb *cmd, size_t cmd_size,
- u8 expected_type, u16 expected_event,
- uwb_rc_cmd_cb_f cb, void *arg);
-
-
-void uwb_rc_neh_create(struct uwb_rc *rc);
-void uwb_rc_neh_destroy(struct uwb_rc *rc);
-
-struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd,
- u8 expected_type, u16 expected_event,
- uwb_rc_cmd_cb_f cb, void *arg);
-void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh);
-void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh);
-void uwb_rc_neh_put(struct uwb_rc_neh *neh);
-
-/* Event size tables */
-extern int uwb_est_create(void);
-extern void uwb_est_destroy(void);
-
-/*
- * UWB conflicting alien reservations
- */
-struct uwb_cnflt_alien {
- struct uwb_rc *rc;
- struct list_head rc_node;
- struct uwb_mas_bm mas;
- struct timer_list timer;
- struct work_struct cnflt_update_work;
-};
-
-enum uwb_uwb_rsv_alloc_result {
- UWB_RSV_ALLOC_FOUND = 0,
- UWB_RSV_ALLOC_NOT_FOUND,
-};
-
-enum uwb_rsv_mas_status {
- UWB_RSV_MAS_NOT_AVAIL = 1,
- UWB_RSV_MAS_SAFE,
- UWB_RSV_MAS_UNSAFE,
-};
-
-struct uwb_rsv_col_set_info {
- unsigned char start_col;
- unsigned char interval;
- unsigned char safe_mas_per_col;
- unsigned char unsafe_mas_per_col;
-};
-
-struct uwb_rsv_col_info {
- unsigned char max_avail_safe;
- unsigned char max_avail_unsafe;
- unsigned char highest_mas[UWB_MAS_PER_ZONE];
- struct uwb_rsv_col_set_info csi;
-};
-
-struct uwb_rsv_row_info {
- unsigned char avail[UWB_MAS_PER_ZONE];
- unsigned char free_rows;
- unsigned char used_rows;
-};
-
-/*
- * UWB find allocation
- */
-struct uwb_rsv_alloc_info {
- unsigned char bm[UWB_MAS_PER_ZONE * UWB_NUM_ZONES];
- struct uwb_rsv_col_info ci[UWB_NUM_ZONES];
- struct uwb_rsv_row_info ri;
- struct uwb_mas_bm *not_available;
- struct uwb_mas_bm *result;
- int min_mas;
- int max_mas;
- int max_interval;
- int total_allocated_mases;
- int safe_allocated_mases;
- int unsafe_allocated_mases;
- int interval;
-};
-
-int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv,
- struct uwb_mas_bm *available,
- struct uwb_mas_bm *result);
-void uwb_rsv_handle_drp_avail_change(struct uwb_rc *rc);
-/*
- * UWB Events & management daemon
- */
-
-/**
- * enum uwb_event_type - types of UWB management daemon events
- *
- * The UWB management daemon (uwbd) can receive two types of events:
- * UWB_EVT_TYPE_NOTIF - notification from the radio controller.
- * UWB_EVT_TYPE_MSG - a simple message.
- */
-enum uwb_event_type {
- UWB_EVT_TYPE_NOTIF,
- UWB_EVT_TYPE_MSG,
-};
-
-/**
- * struct uwb_event_notif - an event for a radio controller notification
- * @size: Size of the buffer (ie: Guaranteed to contain at least
- * a full 'struct uwb_rceb')
- * @rceb: Pointer to a kmalloced() event payload
- */
-struct uwb_event_notif {
- size_t size;
- struct uwb_rceb *rceb;
-};
-
-/**
- * enum uwb_event_message - an event for a message for asynchronous processing
- *
- * UWB_EVT_MSG_RESET - reset the radio controller and all PAL hardware.
- */
-enum uwb_event_message {
- UWB_EVT_MSG_RESET,
-};
-
-/**
- * UWB Event
- * @rc: Radio controller that emitted the event (referenced)
- * @ts_jiffies: Timestamp, when was it received
- * @type: This event's type.
- */
-struct uwb_event {
- struct list_head list_node;
- struct uwb_rc *rc;
- unsigned long ts_jiffies;
- enum uwb_event_type type;
- union {
- struct uwb_event_notif notif;
- enum uwb_event_message message;
- };
-};
-
-extern void uwbd_start(struct uwb_rc *rc);
-extern void uwbd_stop(struct uwb_rc *rc);
-extern struct uwb_event *uwb_event_alloc(size_t, gfp_t gfp_mask);
-extern void uwbd_event_queue(struct uwb_event *);
-void uwbd_flush(struct uwb_rc *rc);
-
-/* UWB event handlers */
-extern int uwbd_evt_handle_rc_ie_rcv(struct uwb_event *);
-extern int uwbd_evt_handle_rc_beacon(struct uwb_event *);
-extern int uwbd_evt_handle_rc_beacon_size(struct uwb_event *);
-extern int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *);
-extern int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *);
-extern int uwbd_evt_handle_rc_drp(struct uwb_event *);
-extern int uwbd_evt_handle_rc_drp_avail(struct uwb_event *);
-
-int uwbd_msg_handle_reset(struct uwb_event *evt);
-
-
-/*
- * Address management
- */
-int uwb_rc_dev_addr_assign(struct uwb_rc *rc);
-int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt);
-
-/*
- * UWB Beacon Cache
- *
- * Each beacon we received is kept in a cache--when we receive that
- * beacon consistently, that means there is a new device that we have
- * to add to the system.
- */
-
-extern unsigned long beacon_timeout_ms;
-
-/**
- * Beacon cache entry
- *
- * @jiffies_refresh: last time a beacon was received that refreshed
- * this cache entry.
- * @uwb_dev: device connected to this beacon. This pointer is not
- * safe, you need to get it with uwb_dev_try_get()
- *
- * @hits: how many time we have seen this beacon since last time we
- * cleared it
- */
-struct uwb_beca_e {
- struct mutex mutex;
- struct kref refcnt;
- struct list_head node;
- struct uwb_mac_addr *mac_addr;
- struct uwb_dev_addr dev_addr;
- u8 hits;
- unsigned long ts_jiffies;
- struct uwb_dev *uwb_dev;
- struct uwb_rc_evt_beacon *be;
- struct stats lqe_stats, rssi_stats; /* radio statistics */
-};
-struct uwb_beacon_frame;
-extern ssize_t uwb_bce_print_IEs(struct uwb_dev *, struct uwb_beca_e *,
- char *, size_t);
-
-extern void uwb_bce_kfree(struct kref *_bce);
-static inline void uwb_bce_get(struct uwb_beca_e *bce)
-{
- kref_get(&bce->refcnt);
-}
-static inline void uwb_bce_put(struct uwb_beca_e *bce)
-{
- kref_put(&bce->refcnt, uwb_bce_kfree);
-}
-extern void uwb_beca_purge(struct uwb_rc *rc);
-extern void uwb_beca_release(struct uwb_rc *rc);
-
-struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
- const struct uwb_dev_addr *devaddr);
-struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc,
- const struct uwb_mac_addr *macaddr);
-
-int uwb_radio_setup(struct uwb_rc *rc);
-void uwb_radio_reset_state(struct uwb_rc *rc);
-void uwb_radio_shutdown(struct uwb_rc *rc);
-int uwb_radio_force_channel(struct uwb_rc *rc, int channel);
-
-/* -- UWB Sysfs representation */
-extern struct class uwb_rc_class;
-extern struct bus_type uwb_bus_type;
-extern struct device_attribute dev_attr_mac_address;
-extern struct device_attribute dev_attr_beacon;
-extern struct device_attribute dev_attr_scan;
-
-/* -- DRP Bandwidth allocator: bandwidth allocations, reservations, DRP */
-void uwb_rsv_init(struct uwb_rc *rc);
-int uwb_rsv_setup(struct uwb_rc *rc);
-void uwb_rsv_cleanup(struct uwb_rc *rc);
-void uwb_rsv_remove_all(struct uwb_rc *rc);
-void uwb_rsv_get(struct uwb_rsv *rsv);
-void uwb_rsv_put(struct uwb_rsv *rsv);
-bool uwb_rsv_has_two_drp_ies(struct uwb_rsv *rsv);
-void uwb_rsv_dump(char *text, struct uwb_rsv *rsv);
-int uwb_rsv_try_move(struct uwb_rsv *rsv, struct uwb_mas_bm *available);
-void uwb_rsv_backoff_win_timer(struct timer_list *t);
-void uwb_rsv_backoff_win_increment(struct uwb_rc *rc);
-int uwb_rsv_status(struct uwb_rsv *rsv);
-int uwb_rsv_companion_status(struct uwb_rsv *rsv);
-
-void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state);
-void uwb_rsv_remove(struct uwb_rsv *rsv);
-struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src,
- struct uwb_ie_drp *drp_ie);
-void uwb_rsv_sched_update(struct uwb_rc *rc);
-void uwb_rsv_queue_update(struct uwb_rc *rc);
-
-int uwb_drp_ie_update(struct uwb_rsv *rsv);
-void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie);
-
-void uwb_drp_avail_init(struct uwb_rc *rc);
-void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail);
-int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas);
-void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas);
-void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas);
-void uwb_drp_avail_ie_update(struct uwb_rc *rc);
-
-/* -- PAL support */
-void uwb_rc_pal_init(struct uwb_rc *rc);
-
-/* -- Misc */
-
-extern ssize_t uwb_mac_frame_hdr_print(char *, size_t,
- const struct uwb_mac_frame_hdr *);
-
-/* -- Debug interface */
-void uwb_dbg_init(void);
-void uwb_dbg_exit(void);
-void uwb_dbg_add_rc(struct uwb_rc *rc);
-void uwb_dbg_del_rc(struct uwb_rc *rc);
-struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal);
-
-static inline void uwb_dev_lock(struct uwb_dev *uwb_dev)
-{
- device_lock(&uwb_dev->dev);
-}
-
-static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev)
-{
- device_unlock(&uwb_dev->dev);
-}
-
-#endif /* #ifndef __UWB_INTERNAL_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Ultra Wide Band
- * UWB API
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: doc: overview of the API, different parts and pointers
- */
-
-#ifndef __LINUX__UWB_H__
-#define __LINUX__UWB_H__
-
-#include <linux/limits.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/workqueue.h>
-#include <asm/page.h>
-#include "include/spec.h"
-
-struct uwb_dev;
-struct uwb_beca_e;
-struct uwb_rc;
-struct uwb_rsv;
-struct uwb_dbg;
-
-/**
- * struct uwb_dev - a UWB Device
- * @rc: UWB Radio Controller that discovered the device (kind of its
- * parent).
- * @bce: a beacon cache entry for this device; or NULL if the device
- * is a local radio controller.
- * @mac_addr: the EUI-48 address of this device.
- * @dev_addr: the current DevAddr used by this device.
- * @beacon_slot: the slot number the beacon is using.
- * @streams: bitmap of streams allocated to reservations targeted at
- * this device. For an RC, this is the streams allocated for
- * reservations targeted at DevAddrs.
- *
- * A UWB device may either by a neighbor or part of a local radio
- * controller.
- */
-struct uwb_dev {
- struct mutex mutex;
- struct list_head list_node;
- struct device dev;
- struct uwb_rc *rc; /* radio controller */
- struct uwb_beca_e *bce; /* Beacon Cache Entry */
-
- struct uwb_mac_addr mac_addr;
- struct uwb_dev_addr dev_addr;
- int beacon_slot;
- DECLARE_BITMAP(streams, UWB_NUM_STREAMS);
- DECLARE_BITMAP(last_availability_bm, UWB_NUM_MAS);
-};
-#define to_uwb_dev(d) container_of(d, struct uwb_dev, dev)
-
-/**
- * UWB HWA/WHCI Radio Control {Command|Event} Block context IDs
- *
- * RC[CE]Bs have a 'context ID' field that matches the command with
- * the event received to confirm it.
- *
- * Maximum number of context IDs
- */
-enum { UWB_RC_CTX_MAX = 256 };
-
-
-/** Notification chain head for UWB generated events to listeners */
-struct uwb_notifs_chain {
- struct list_head list;
- struct mutex mutex;
-};
-
-/* Beacon cache list */
-struct uwb_beca {
- struct list_head list;
- size_t entries;
- struct mutex mutex;
-};
-
-/* Event handling thread. */
-struct uwbd {
- int pid;
- struct task_struct *task;
- wait_queue_head_t wq;
- struct list_head event_list;
- spinlock_t event_list_lock;
-};
-
-/**
- * struct uwb_mas_bm - a bitmap of all MAS in a superframe
- * @bm: a bitmap of length #UWB_NUM_MAS
- */
-struct uwb_mas_bm {
- DECLARE_BITMAP(bm, UWB_NUM_MAS);
- DECLARE_BITMAP(unsafe_bm, UWB_NUM_MAS);
- int safe;
- int unsafe;
-};
-
-/**
- * uwb_rsv_state - UWB Reservation state.
- *
- * NONE - reservation is not active (no DRP IE being transmitted).
- *
- * Owner reservation states:
- *
- * INITIATED - owner has sent an initial DRP request.
- * PENDING - target responded with pending Reason Code.
- * MODIFIED - reservation manager is modifying an established
- * reservation with a different MAS allocation.
- * ESTABLISHED - the reservation has been successfully negotiated.
- *
- * Target reservation states:
- *
- * DENIED - request is denied.
- * ACCEPTED - request is accepted.
- * PENDING - PAL has yet to make a decision to whether to accept or
- * deny.
- *
- * FIXME: further target states TBD.
- */
-enum uwb_rsv_state {
- UWB_RSV_STATE_NONE = 0,
- UWB_RSV_STATE_O_INITIATED,
- UWB_RSV_STATE_O_PENDING,
- UWB_RSV_STATE_O_MODIFIED,
- UWB_RSV_STATE_O_ESTABLISHED,
- UWB_RSV_STATE_O_TO_BE_MOVED,
- UWB_RSV_STATE_O_MOVE_EXPANDING,
- UWB_RSV_STATE_O_MOVE_COMBINING,
- UWB_RSV_STATE_O_MOVE_REDUCING,
- UWB_RSV_STATE_T_ACCEPTED,
- UWB_RSV_STATE_T_DENIED,
- UWB_RSV_STATE_T_CONFLICT,
- UWB_RSV_STATE_T_PENDING,
- UWB_RSV_STATE_T_EXPANDING_ACCEPTED,
- UWB_RSV_STATE_T_EXPANDING_CONFLICT,
- UWB_RSV_STATE_T_EXPANDING_PENDING,
- UWB_RSV_STATE_T_EXPANDING_DENIED,
- UWB_RSV_STATE_T_RESIZED,
-
- UWB_RSV_STATE_LAST,
-};
-
-enum uwb_rsv_target_type {
- UWB_RSV_TARGET_DEV,
- UWB_RSV_TARGET_DEVADDR,
-};
-
-/**
- * struct uwb_rsv_target - the target of a reservation.
- *
- * Reservations unicast and targeted at a single device
- * (UWB_RSV_TARGET_DEV); or (e.g., in the case of WUSB) targeted at a
- * specific (private) DevAddr (UWB_RSV_TARGET_DEVADDR).
- */
-struct uwb_rsv_target {
- enum uwb_rsv_target_type type;
- union {
- struct uwb_dev *dev;
- struct uwb_dev_addr devaddr;
- };
-};
-
-struct uwb_rsv_move {
- struct uwb_mas_bm final_mas;
- struct uwb_ie_drp *companion_drp_ie;
- struct uwb_mas_bm companion_mas;
-};
-
-/*
- * Number of streams reserved for reservations targeted at DevAddrs.
- */
-#define UWB_NUM_GLOBAL_STREAMS 1
-
-typedef void (*uwb_rsv_cb_f)(struct uwb_rsv *rsv);
-
-/**
- * struct uwb_rsv - a DRP reservation
- *
- * Data structure management:
- *
- * @rc: the radio controller this reservation is for
- * (as target or owner)
- * @rc_node: a list node for the RC
- * @pal_node: a list node for the PAL
- *
- * Owner and target parameters:
- *
- * @owner: the UWB device owning this reservation
- * @target: the target UWB device
- * @type: reservation type
- *
- * Owner parameters:
- *
- * @max_mas: maxiumum number of MAS
- * @min_mas: minimum number of MAS
- * @sparsity: owner selected sparsity
- * @is_multicast: true iff multicast
- *
- * @callback: callback function when the reservation completes
- * @pal_priv: private data for the PAL making the reservation
- *
- * Reservation status:
- *
- * @status: negotiation status
- * @stream: stream index allocated for this reservation
- * @tiebreaker: conflict tiebreaker for this reservation
- * @mas: reserved MAS
- * @drp_ie: the DRP IE
- * @ie_valid: true iff the DRP IE matches the reservation parameters
- *
- * DRP reservations are uniquely identified by the owner, target and
- * stream index. However, when using a DevAddr as a target (e.g., for
- * a WUSB cluster reservation) the responses may be received from
- * devices with different DevAddrs. In this case, reservations are
- * uniquely identified by just the stream index. A number of stream
- * indexes (UWB_NUM_GLOBAL_STREAMS) are reserved for this.
- */
-struct uwb_rsv {
- struct uwb_rc *rc;
- struct list_head rc_node;
- struct list_head pal_node;
- struct kref kref;
-
- struct uwb_dev *owner;
- struct uwb_rsv_target target;
- enum uwb_drp_type type;
- int max_mas;
- int min_mas;
- int max_interval;
- bool is_multicast;
-
- uwb_rsv_cb_f callback;
- void *pal_priv;
-
- enum uwb_rsv_state state;
- bool needs_release_companion_mas;
- u8 stream;
- u8 tiebreaker;
- struct uwb_mas_bm mas;
- struct uwb_ie_drp *drp_ie;
- struct uwb_rsv_move mv;
- bool ie_valid;
- struct timer_list timer;
- struct work_struct handle_timeout_work;
-};
-
-static const
-struct uwb_mas_bm uwb_mas_bm_zero = { .bm = { 0 } };
-
-static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas)
-{
- bitmap_copy_le(dst, mas->bm, UWB_NUM_MAS);
-}
-
-/**
- * struct uwb_drp_avail - a radio controller's view of MAS usage
- * @global: MAS unused by neighbors (excluding reservations targeted
- * or owned by the local radio controller) or the beaon period
- * @local: MAS unused by local established reservations
- * @pending: MAS unused by local pending reservations
- * @ie: DRP Availability IE to be included in the beacon
- * @ie_valid: true iff @ie is valid and does not need to regenerated from
- * @global and @local
- *
- * Each radio controller maintains a view of MAS usage or
- * availability. MAS available for a new reservation are determined
- * from the intersection of @global, @local, and @pending.
- *
- * The radio controller must transmit a DRP Availability IE that's the
- * intersection of @global and @local.
- *
- * A set bit indicates the MAS is unused and available.
- *
- * rc->rsvs_mutex should be held before accessing this data structure.
- *
- * [ECMA-368] section 17.4.3.
- */
-struct uwb_drp_avail {
- DECLARE_BITMAP(global, UWB_NUM_MAS);
- DECLARE_BITMAP(local, UWB_NUM_MAS);
- DECLARE_BITMAP(pending, UWB_NUM_MAS);
- struct uwb_ie_drp_avail ie;
- bool ie_valid;
-};
-
-struct uwb_drp_backoff_win {
- u8 window;
- u8 n;
- int total_expired;
- struct timer_list timer;
- bool can_reserve_extra_mases;
-};
-
-const char *uwb_rsv_state_str(enum uwb_rsv_state state);
-const char *uwb_rsv_type_str(enum uwb_drp_type type);
-
-struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb,
- void *pal_priv);
-void uwb_rsv_destroy(struct uwb_rsv *rsv);
-
-int uwb_rsv_establish(struct uwb_rsv *rsv);
-int uwb_rsv_modify(struct uwb_rsv *rsv,
- int max_mas, int min_mas, int sparsity);
-void uwb_rsv_terminate(struct uwb_rsv *rsv);
-
-void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv);
-
-void uwb_rsv_get_usable_mas(struct uwb_rsv *orig_rsv, struct uwb_mas_bm *mas);
-
-/**
- * Radio Control Interface instance
- *
- *
- * Life cycle rules: those of the UWB Device.
- *
- * @index: an index number for this radio controller, as used in the
- * device name.
- * @version: version of protocol supported by this device
- * @priv: Backend implementation; rw with uwb_dev.dev.sem taken.
- * @cmd: Backend implementation to execute commands; rw and call
- * only with uwb_dev.dev.sem taken.
- * @reset: Hardware reset of radio controller and any PAL controllers.
- * @filter: Backend implementation to manipulate data to and from device
- * to be compliant to specification assumed by driver (WHCI
- * 0.95).
- *
- * uwb_dev.dev.mutex is used to execute commands and update
- * the corresponding structures; can't use a spinlock
- * because rc->cmd() can sleep.
- * @ies: This is a dynamically allocated array cacheing the
- * IEs (settable by the host) that the beacon of this
- * radio controller is currently sending.
- *
- * In reality, we store here the full command we set to
- * the radio controller (which is basically a command
- * prefix followed by all the IEs the beacon currently
- * contains). This way we don't have to realloc and
- * memcpy when setting it.
- *
- * We set this up in uwb_rc_ie_setup(), where we alloc
- * this struct, call get_ie() [so we know which IEs are
- * currently being sent, if any].
- *
- * @ies_capacity:Amount of space (in bytes) allocated in @ies. The
- * amount used is given by sizeof(*ies) plus ies->wIELength
- * (which is a little endian quantity all the time).
- * @ies_mutex: protect the IE cache
- * @dbg: information for the debug interface
- */
-struct uwb_rc {
- struct uwb_dev uwb_dev;
- int index;
- u16 version;
-
- struct module *owner;
- void *priv;
- int (*start)(struct uwb_rc *rc);
- void (*stop)(struct uwb_rc *rc);
- int (*cmd)(struct uwb_rc *, const struct uwb_rccb *, size_t);
- int (*reset)(struct uwb_rc *rc);
- int (*filter_cmd)(struct uwb_rc *, struct uwb_rccb **, size_t *);
- int (*filter_event)(struct uwb_rc *, struct uwb_rceb **, const size_t,
- size_t *, size_t *);
-
- spinlock_t neh_lock; /* protects neh_* and ctx_* */
- struct list_head neh_list; /* Open NE handles */
- unsigned long ctx_bm[UWB_RC_CTX_MAX / 8 / sizeof(unsigned long)];
- u8 ctx_roll;
-
- int beaconing; /* Beaconing state [channel number] */
- int beaconing_forced;
- int scanning;
- enum uwb_scan_type scan_type:3;
- unsigned ready:1;
- struct uwb_notifs_chain notifs_chain;
- struct uwb_beca uwb_beca;
-
- struct uwbd uwbd;
-
- struct uwb_drp_backoff_win bow;
- struct uwb_drp_avail drp_avail;
- struct list_head reservations;
- struct list_head cnflt_alien_list;
- struct uwb_mas_bm cnflt_alien_bitmap;
- struct mutex rsvs_mutex;
- spinlock_t rsvs_lock;
- struct workqueue_struct *rsv_workq;
-
- struct delayed_work rsv_update_work;
- struct delayed_work rsv_alien_bp_work;
- int set_drp_ie_pending;
- struct mutex ies_mutex;
- struct uwb_rc_cmd_set_ie *ies;
- size_t ies_capacity;
-
- struct list_head pals;
- int active_pals;
-
- struct uwb_dbg *dbg;
-};
-
-
-/**
- * struct uwb_pal - a UWB PAL
- * @name: descriptive name for this PAL (wusbhc, wlp, etc.).
- * @device: a device for the PAL. Used to link the PAL and the radio
- * controller in sysfs.
- * @rc: the radio controller the PAL uses.
- * @channel_changed: called when the channel used by the radio changes.
- * A channel of -1 means the channel has been stopped.
- * @new_rsv: called when a peer requests a reservation (may be NULL if
- * the PAL cannot accept reservation requests).
- * @channel: channel being used by the PAL; 0 if the PAL isn't using
- * the radio; -1 if the PAL wishes to use the radio but
- * cannot.
- * @debugfs_dir: a debugfs directory which the PAL can use for its own
- * debugfs files.
- *
- * A Protocol Adaptation Layer (PAL) is a user of the WiMedia UWB
- * radio platform (e.g., WUSB, WLP or Bluetooth UWB AMP).
- *
- * The PALs using a radio controller must register themselves to
- * permit the UWB stack to coordinate usage of the radio between the
- * various PALs or to allow PALs to response to certain requests from
- * peers.
- *
- * A struct uwb_pal should be embedded in a containing structure
- * belonging to the PAL and initialized with uwb_pal_init()). Fields
- * should be set appropriately by the PAL before registering the PAL
- * with uwb_pal_register().
- */
-struct uwb_pal {
- struct list_head node;
- const char *name;
- struct device *device;
- struct uwb_rc *rc;
-
- void (*channel_changed)(struct uwb_pal *pal, int channel);
- void (*new_rsv)(struct uwb_pal *pal, struct uwb_rsv *rsv);
-
- int channel;
- struct dentry *debugfs_dir;
-};
-
-void uwb_pal_init(struct uwb_pal *pal);
-int uwb_pal_register(struct uwb_pal *pal);
-void uwb_pal_unregister(struct uwb_pal *pal);
-
-int uwb_radio_start(struct uwb_pal *pal);
-void uwb_radio_stop(struct uwb_pal *pal);
-
-/*
- * General public API
- *
- * This API can be used by UWB device drivers or by those implementing
- * UWB Radio Controllers
- */
-struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
- const struct uwb_dev_addr *devaddr);
-struct uwb_dev *uwb_dev_get_by_rc(struct uwb_dev *, struct uwb_rc *);
-static inline void uwb_dev_get(struct uwb_dev *uwb_dev)
-{
- get_device(&uwb_dev->dev);
-}
-static inline void uwb_dev_put(struct uwb_dev *uwb_dev)
-{
- put_device(&uwb_dev->dev);
-}
-struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev);
-
-/**
- * Callback function for 'uwb_{dev,rc}_foreach()'.
- *
- * @dev: Linux device instance
- * 'uwb_dev = container_of(dev, struct uwb_dev, dev)'
- * @priv: Data passed by the caller to 'uwb_{dev,rc}_foreach()'.
- *
- * @returns: 0 to continue the iterations, any other val to stop
- * iterating and return the value to the caller of
- * _foreach().
- */
-typedef int (*uwb_dev_for_each_f)(struct device *dev, void *priv);
-int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f func, void *priv);
-
-struct uwb_rc *uwb_rc_alloc(void);
-struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *);
-struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *);
-void uwb_rc_put(struct uwb_rc *rc);
-
-typedef void (*uwb_rc_cmd_cb_f)(struct uwb_rc *rc, void *arg,
- struct uwb_rceb *reply, ssize_t reply_size);
-
-int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
- struct uwb_rccb *cmd, size_t cmd_size,
- u8 expected_type, u16 expected_event,
- uwb_rc_cmd_cb_f cb, void *arg);
-ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
- struct uwb_rccb *cmd, size_t cmd_size,
- struct uwb_rceb *reply, size_t reply_size);
-ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name,
- struct uwb_rccb *cmd, size_t cmd_size,
- u8 expected_type, u16 expected_event,
- struct uwb_rceb **preply);
-
-size_t __uwb_addr_print(char *, size_t, const unsigned char *, int);
-
-int uwb_rc_dev_addr_set(struct uwb_rc *, const struct uwb_dev_addr *);
-int uwb_rc_dev_addr_get(struct uwb_rc *, struct uwb_dev_addr *);
-int uwb_rc_mac_addr_set(struct uwb_rc *, const struct uwb_mac_addr *);
-int uwb_rc_mac_addr_get(struct uwb_rc *, struct uwb_mac_addr *);
-int __uwb_mac_addr_assigned_check(struct device *, void *);
-int __uwb_dev_addr_assigned_check(struct device *, void *);
-
-/* Print in @buf a pretty repr of @addr */
-static inline size_t uwb_dev_addr_print(char *buf, size_t buf_size,
- const struct uwb_dev_addr *addr)
-{
- return __uwb_addr_print(buf, buf_size, addr->data, 0);
-}
-
-/* Print in @buf a pretty repr of @addr */
-static inline size_t uwb_mac_addr_print(char *buf, size_t buf_size,
- const struct uwb_mac_addr *addr)
-{
- return __uwb_addr_print(buf, buf_size, addr->data, 1);
-}
-
-/* @returns 0 if device addresses @addr2 and @addr1 are equal */
-static inline int uwb_dev_addr_cmp(const struct uwb_dev_addr *addr1,
- const struct uwb_dev_addr *addr2)
-{
- return memcmp(addr1, addr2, sizeof(*addr1));
-}
-
-/* @returns 0 if MAC addresses @addr2 and @addr1 are equal */
-static inline int uwb_mac_addr_cmp(const struct uwb_mac_addr *addr1,
- const struct uwb_mac_addr *addr2)
-{
- return memcmp(addr1, addr2, sizeof(*addr1));
-}
-
-/* @returns !0 if a MAC @addr is a broadcast address */
-static inline int uwb_mac_addr_bcast(const struct uwb_mac_addr *addr)
-{
- struct uwb_mac_addr bcast = {
- .data = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }
- };
- return !uwb_mac_addr_cmp(addr, &bcast);
-}
-
-/* @returns !0 if a MAC @addr is all zeroes*/
-static inline int uwb_mac_addr_unset(const struct uwb_mac_addr *addr)
-{
- struct uwb_mac_addr unset = {
- .data = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
- };
- return !uwb_mac_addr_cmp(addr, &unset);
-}
-
-/* @returns !0 if the address is in use. */
-static inline unsigned __uwb_dev_addr_assigned(struct uwb_rc *rc,
- struct uwb_dev_addr *addr)
-{
- return uwb_dev_for_each(rc, __uwb_dev_addr_assigned_check, addr);
-}
-
-/*
- * UWB Radio Controller API
- *
- * This API is used (in addition to the general API) to implement UWB
- * Radio Controllers.
- */
-void uwb_rc_init(struct uwb_rc *);
-int uwb_rc_add(struct uwb_rc *, struct device *dev, void *rc_priv);
-void uwb_rc_rm(struct uwb_rc *);
-void uwb_rc_neh_grok(struct uwb_rc *, void *, size_t);
-void uwb_rc_neh_error(struct uwb_rc *, int);
-void uwb_rc_reset_all(struct uwb_rc *rc);
-void uwb_rc_pre_reset(struct uwb_rc *rc);
-int uwb_rc_post_reset(struct uwb_rc *rc);
-
-/**
- * uwb_rsv_is_owner - is the owner of this reservation the RC?
- * @rsv: the reservation
- */
-static inline bool uwb_rsv_is_owner(struct uwb_rsv *rsv)
-{
- return rsv->owner == &rsv->rc->uwb_dev;
-}
-
-/**
- * enum uwb_notifs - UWB events that can be passed to any listeners
- * @UWB_NOTIF_ONAIR: a new neighbour has joined the beacon group.
- * @UWB_NOTIF_OFFAIR: a neighbour has left the beacon group.
- *
- * Higher layers can register callback functions with the radio
- * controller using uwb_notifs_register(). The radio controller
- * maintains a list of all registered handlers and will notify all
- * nodes when an event occurs.
- */
-enum uwb_notifs {
- UWB_NOTIF_ONAIR,
- UWB_NOTIF_OFFAIR,
-};
-
-/* Callback function registered with UWB */
-struct uwb_notifs_handler {
- struct list_head list_node;
- void (*cb)(void *, struct uwb_dev *, enum uwb_notifs);
- void *data;
-};
-
-int uwb_notifs_register(struct uwb_rc *, struct uwb_notifs_handler *);
-int uwb_notifs_deregister(struct uwb_rc *, struct uwb_notifs_handler *);
-
-
-/**
- * UWB radio controller Event Size Entry (for creating entry tables)
- *
- * WUSB and WHCI define events and notifications, and they might have
- * fixed or variable size.
- *
- * Each event/notification has a size which is not necessarily known
- * in advance based on the event code. As well, vendor specific
- * events/notifications will have a size impossible to determine
- * unless we know about the device's specific details.
- *
- * It was way too smart of the spec writers not to think that it would
- * be impossible for a generic driver to skip over vendor specific
- * events/notifications if there are no LENGTH fields in the HEADER of
- * each message...the transaction size cannot be counted on as the
- * spec does not forbid to pack more than one event in a single
- * transaction.
- *
- * Thus, we guess sizes with tables (or for events, when you know the
- * size ahead of time you can use uwb_rc_neh_extra_size*()). We
- * register tables with the known events and their sizes, and then we
- * traverse those tables. For those with variable length, we provide a
- * way to lookup the size inside the event/notification's
- * payload. This allows device-specific event size tables to be
- * registered.
- *
- * @size: Size of the payload
- *
- * @offset: if != 0, at offset @offset-1 starts a field with a length
- * that has to be added to @size. The format of the field is
- * given by @type.
- *
- * @type: Type and length of the offset field. Most common is LE 16
- * bits (that's why that is zero); others are there mostly to
- * cover for bugs and weirdos.
- */
-struct uwb_est_entry {
- size_t size;
- unsigned offset;
- enum { UWB_EST_16 = 0, UWB_EST_8 = 1 } type;
-};
-
-int uwb_est_register(u8 type, u8 code_high, u16 vendor, u16 product,
- const struct uwb_est_entry *, size_t entries);
-int uwb_est_unregister(u8 type, u8 code_high, u16 vendor, u16 product,
- const struct uwb_est_entry *, size_t entries);
-ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
- size_t len);
-
-/* -- Misc */
-
-enum {
- EDC_MAX_ERRORS = 10,
- EDC_ERROR_TIMEFRAME = HZ,
-};
-
-/* error density counter */
-struct edc {
- unsigned long timestart;
- u16 errorcount;
-};
-
-static inline
-void edc_init(struct edc *edc)
-{
- edc->timestart = jiffies;
-}
-
-/* Called when an error occurred.
- * This is way to determine if the number of acceptable errors per time
- * period has been exceeded. It is not accurate as there are cases in which
- * this scheme will not work, for example if there are periodic occurrences
- * of errors that straddle updates to the start time. This scheme is
- * sufficient for our usage.
- *
- * @returns 1 if maximum acceptable errors per timeframe has been exceeded.
- */
-static inline int edc_inc(struct edc *err_hist, u16 max_err, u16 timeframe)
-{
- unsigned long now;
-
- now = jiffies;
- if (now - err_hist->timestart > timeframe) {
- err_hist->errorcount = 1;
- err_hist->timestart = now;
- } else if (++err_hist->errorcount > max_err) {
- err_hist->errorcount = 0;
- err_hist->timestart = now;
- return 1;
- }
- return 0;
-}
-
-
-/* Information Element handling */
-
-struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len);
-int uwb_rc_ie_add(struct uwb_rc *uwb_rc, const struct uwb_ie_hdr *ies, size_t size);
-int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id);
-
-/*
- * Transmission statistics
- *
- * UWB uses LQI and RSSI (one byte values) for reporting radio signal
- * strength and line quality indication. We do quick and dirty
- * averages of those. They are signed values, btw.
- *
- * For 8 bit quantities, we keep the min, the max, an accumulator
- * (@sigma) and a # of samples. When @samples gets to 255, we compute
- * the average (@sigma / @samples), place it in @sigma and reset
- * @samples to 1 (so we use it as the first sample).
- *
- * Now, statistically speaking, probably I am kicking the kidneys of
- * some books I have in my shelves collecting dust, but I just want to
- * get an approx, not the Nobel.
- *
- * LOCKING: there is no locking per se, but we try to keep a lockless
- * schema. Only _add_samples() modifies the values--as long as you
- * have other locking on top that makes sure that no two calls of
- * _add_sample() happen at the same time, then we are fine. Now, for
- * resetting the values we just set @samples to 0 and that makes the
- * next _add_sample() to start with defaults. Reading the values in
- * _show() currently can race, so you need to make sure the calls are
- * under the same lock that protects calls to _add_sample(). FIXME:
- * currently unlocked (It is not ultraprecise but does the trick. Bite
- * me).
- */
-struct stats {
- s8 min, max;
- s16 sigma;
- atomic_t samples;
-};
-
-static inline
-void stats_init(struct stats *stats)
-{
- atomic_set(&stats->samples, 0);
- wmb();
-}
-
-static inline
-void stats_add_sample(struct stats *stats, s8 sample)
-{
- s8 min, max;
- s16 sigma;
- unsigned samples = atomic_read(&stats->samples);
- if (samples == 0) { /* it was zero before, so we initialize */
- min = 127;
- max = -128;
- sigma = 0;
- } else {
- min = stats->min;
- max = stats->max;
- sigma = stats->sigma;
- }
-
- if (sample < min) /* compute new values */
- min = sample;
- else if (sample > max)
- max = sample;
- sigma += sample;
-
- stats->min = min; /* commit */
- stats->max = max;
- stats->sigma = sigma;
- if (atomic_add_return(1, &stats->samples) > 255) {
- /* wrapped around! reset */
- stats->sigma = sigma / 256;
- atomic_set(&stats->samples, 1);
- }
-}
-
-static inline ssize_t stats_show(struct stats *stats, char *buf)
-{
- int min, max, avg;
- int samples = atomic_read(&stats->samples);
- if (samples == 0)
- min = max = avg = 0;
- else {
- min = stats->min;
- max = stats->max;
- avg = stats->sigma / samples;
- }
- return scnprintf(buf, PAGE_SIZE, "%d %d %d\n", min, max, avg);
-}
-
-static inline ssize_t stats_store(struct stats *stats, const char *buf,
- size_t size)
-{
- stats_init(stats);
- return size;
-}
-
-#endif /* #ifndef __LINUX__UWB_H__ */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Ultra Wide Band
- * Neighborhood Management Daemon
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This daemon takes care of maintaing information that describes the
- * UWB neighborhood that the radios in this machine can see. It also
- * keeps a tab of which devices are visible, makes sure each HC sits
- * on a different channel to avoid interfering, etc.
- *
- * Different drivers (radio controller, device, any API in general)
- * communicate with this daemon through an event queue. Daemon wakes
- * up, takes a list of events and handles them one by one; handling
- * function is extracted from a table based on the event's type and
- * subtype. Events are freed only if the handling function says so.
- *
- * . Lock protecting the event list has to be an spinlock and locked
- * with IRQSAVE because it might be called from an interrupt
- * context (ie: when events arrive and the notification drops
- * down from the ISR).
- *
- * . UWB radio controller drivers queue events to the daemon using
- * uwbd_event_queue(). They just get the event, chew it to make it
- * look like UWBD likes it and pass it in a buffer allocated with
- * uwb_event_alloc().
- *
- * EVENTS
- *
- * Events have a type, a subtype, a length, some other stuff and the
- * data blob, which depends on the event. The header is 'struct
- * uwb_event'; for payloads, see 'struct uwbd_evt_*'.
- *
- * EVENT HANDLER TABLES
- *
- * To find a handling function for an event, the type is used to index
- * a subtype-table in the type-table. The subtype-table is indexed
- * with the subtype to get the function that handles the event. Start
- * with the main type-table 'uwbd_evt_type_handler'.
- *
- * DEVICES
- *
- * Devices are created when a bunch of beacons have been received and
- * it is stablished that the device has stable radio presence. CREATED
- * only, not configured. Devices are ONLY configured when an
- * Application-Specific IE Probe is receieved, in which the device
- * declares which Protocol ID it groks. Then the device is CONFIGURED
- * (and the driver->probe() stuff of the device model is invoked).
- *
- * Devices are considered disconnected when a certain number of
- * beacons are not received in an amount of time.
- *
- * Handler functions are called normally uwbd_evt_handle_*().
- */
-#include <linux/kthread.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/freezer.h>
-
-#include "uwb-internal.h"
-
-/*
- * UWBD Event handler function signature
- *
- * Return !0 if the event needs not to be freed (ie the handler
- * takes/took care of it). 0 means the daemon code will free the
- * event.
- *
- * @evt->rc is already referenced and guaranteed to exist. See
- * uwb_evt_handle().
- */
-typedef int (*uwbd_evt_handler_f)(struct uwb_event *);
-
-/**
- * Properties of a UWBD event
- *
- * @handler: the function that will handle this event
- * @name: text name of event
- */
-struct uwbd_event {
- uwbd_evt_handler_f handler;
- const char *name;
-};
-
-/* Table of handlers for and properties of the UWBD Radio Control Events */
-static struct uwbd_event uwbd_urc_events[] = {
- [UWB_RC_EVT_IE_RCV] = {
- .handler = uwbd_evt_handle_rc_ie_rcv,
- .name = "IE_RECEIVED"
- },
- [UWB_RC_EVT_BEACON] = {
- .handler = uwbd_evt_handle_rc_beacon,
- .name = "BEACON_RECEIVED"
- },
- [UWB_RC_EVT_BEACON_SIZE] = {
- .handler = uwbd_evt_handle_rc_beacon_size,
- .name = "BEACON_SIZE_CHANGE"
- },
- [UWB_RC_EVT_BPOIE_CHANGE] = {
- .handler = uwbd_evt_handle_rc_bpoie_change,
- .name = "BPOIE_CHANGE"
- },
- [UWB_RC_EVT_BP_SLOT_CHANGE] = {
- .handler = uwbd_evt_handle_rc_bp_slot_change,
- .name = "BP_SLOT_CHANGE"
- },
- [UWB_RC_EVT_DRP_AVAIL] = {
- .handler = uwbd_evt_handle_rc_drp_avail,
- .name = "DRP_AVAILABILITY_CHANGE"
- },
- [UWB_RC_EVT_DRP] = {
- .handler = uwbd_evt_handle_rc_drp,
- .name = "DRP"
- },
- [UWB_RC_EVT_DEV_ADDR_CONFLICT] = {
- .handler = uwbd_evt_handle_rc_dev_addr_conflict,
- .name = "DEV_ADDR_CONFLICT",
- },
-};
-
-
-
-struct uwbd_evt_type_handler {
- const char *name;
- struct uwbd_event *uwbd_events;
- size_t size;
-};
-
-/* Table of handlers for each UWBD Event type. */
-static struct uwbd_evt_type_handler uwbd_urc_evt_type_handlers[] = {
- [UWB_RC_CET_GENERAL] = {
- .name = "URC",
- .uwbd_events = uwbd_urc_events,
- .size = ARRAY_SIZE(uwbd_urc_events),
- },
-};
-
-static const struct uwbd_event uwbd_message_handlers[] = {
- [UWB_EVT_MSG_RESET] = {
- .handler = uwbd_msg_handle_reset,
- .name = "reset",
- },
-};
-
-/*
- * Handle an URC event passed to the UWB Daemon
- *
- * @evt: the event to handle
- * @returns: 0 if the event can be kfreed, !0 on the contrary
- * (somebody else took ownership) [coincidentally, returning
- * a <0 errno code will free it :)].
- *
- * Looks up the two indirection tables (one for the type, one for the
- * subtype) to decide which function handles it and then calls the
- * handler.
- *
- * The event structure passed to the event handler has the radio
- * controller in @evt->rc referenced. The reference will be dropped
- * once the handler returns, so if it needs it for longer (async),
- * it'll need to take another one.
- */
-static
-int uwbd_event_handle_urc(struct uwb_event *evt)
-{
- int result = -EINVAL;
- struct uwbd_evt_type_handler *type_table;
- uwbd_evt_handler_f handler;
- u8 type, context;
- u16 event;
-
- type = evt->notif.rceb->bEventType;
- event = le16_to_cpu(evt->notif.rceb->wEvent);
- context = evt->notif.rceb->bEventContext;
-
- if (type >= ARRAY_SIZE(uwbd_urc_evt_type_handlers))
- goto out;
- type_table = &uwbd_urc_evt_type_handlers[type];
- if (type_table->uwbd_events == NULL)
- goto out;
- if (event >= type_table->size)
- goto out;
- handler = type_table->uwbd_events[event].handler;
- if (handler == NULL)
- goto out;
-
- result = (*handler)(evt);
-out:
- if (result < 0)
- dev_err(&evt->rc->uwb_dev.dev,
- "UWBD: event 0x%02x/%04x/%02x, handling failed: %d\n",
- type, event, context, result);
- return result;
-}
-
-static void uwbd_event_handle_message(struct uwb_event *evt)
-{
- struct uwb_rc *rc;
- int result;
-
- rc = evt->rc;
-
- if (evt->message < 0 || evt->message >= ARRAY_SIZE(uwbd_message_handlers)) {
- dev_err(&rc->uwb_dev.dev, "UWBD: invalid message type %d\n", evt->message);
- return;
- }
-
- result = uwbd_message_handlers[evt->message].handler(evt);
- if (result < 0)
- dev_err(&rc->uwb_dev.dev, "UWBD: '%s' message failed: %d\n",
- uwbd_message_handlers[evt->message].name, result);
-}
-
-static void uwbd_event_handle(struct uwb_event *evt)
-{
- struct uwb_rc *rc;
- int should_keep;
-
- rc = evt->rc;
-
- if (rc->ready) {
- switch (evt->type) {
- case UWB_EVT_TYPE_NOTIF:
- should_keep = uwbd_event_handle_urc(evt);
- if (should_keep <= 0)
- kfree(evt->notif.rceb);
- break;
- case UWB_EVT_TYPE_MSG:
- uwbd_event_handle_message(evt);
- break;
- default:
- dev_err(&rc->uwb_dev.dev, "UWBD: invalid event type %d\n", evt->type);
- break;
- }
- }
-
- __uwb_rc_put(rc); /* for the __uwb_rc_get() in uwb_rc_notif_cb() */
-}
-
-/**
- * UWB Daemon
- *
- * Listens to all UWB notifications and takes care to track the state
- * of the UWB neighbourhood for the kernel. When we do a run, we
- * spinlock, move the list to a private copy and release the
- * lock. Hold it as little as possible. Not a conflict: it is
- * guaranteed we own the events in the private list.
- *
- * FIXME: should change so we don't have a 1HZ timer all the time, but
- * only if there are devices.
- */
-static int uwbd(void *param)
-{
- struct uwb_rc *rc = param;
- unsigned long flags;
- struct uwb_event *evt;
- int should_stop = 0;
-
- while (1) {
- wait_event_interruptible_timeout(
- rc->uwbd.wq,
- !list_empty(&rc->uwbd.event_list)
- || (should_stop = kthread_should_stop()),
- HZ);
- if (should_stop)
- break;
-
- spin_lock_irqsave(&rc->uwbd.event_list_lock, flags);
- if (!list_empty(&rc->uwbd.event_list)) {
- evt = list_first_entry(&rc->uwbd.event_list, struct uwb_event, list_node);
- list_del(&evt->list_node);
- } else
- evt = NULL;
- spin_unlock_irqrestore(&rc->uwbd.event_list_lock, flags);
-
- if (evt) {
- uwbd_event_handle(evt);
- kfree(evt);
- }
-
- uwb_beca_purge(rc); /* Purge devices that left */
- }
- return 0;
-}
-
-
-/** Start the UWB daemon */
-void uwbd_start(struct uwb_rc *rc)
-{
- struct task_struct *task = kthread_run(uwbd, rc, "uwbd");
- if (IS_ERR(task)) {
- rc->uwbd.task = NULL;
- printk(KERN_ERR "UWB: Cannot start management daemon; "
- "UWB won't work\n");
- } else {
- rc->uwbd.task = task;
- rc->uwbd.pid = rc->uwbd.task->pid;
- }
-}
-
-/* Stop the UWB daemon and free any unprocessed events */
-void uwbd_stop(struct uwb_rc *rc)
-{
- if (rc->uwbd.task)
- kthread_stop(rc->uwbd.task);
- uwbd_flush(rc);
-}
-
-/*
- * Queue an event for the management daemon
- *
- * When some lower layer receives an event, it uses this function to
- * push it forward to the UWB daemon.
- *
- * Once you pass the event, you don't own it any more, but the daemon
- * does. It will uwb_event_free() it when done, so make sure you
- * uwb_event_alloc()ed it or bad things will happen.
- *
- * If the daemon is not running, we just free the event.
- */
-void uwbd_event_queue(struct uwb_event *evt)
-{
- struct uwb_rc *rc = evt->rc;
- unsigned long flags;
-
- spin_lock_irqsave(&rc->uwbd.event_list_lock, flags);
- if (rc->uwbd.pid != 0) {
- list_add(&evt->list_node, &rc->uwbd.event_list);
- wake_up_all(&rc->uwbd.wq);
- } else {
- __uwb_rc_put(evt->rc);
- if (evt->type == UWB_EVT_TYPE_NOTIF)
- kfree(evt->notif.rceb);
- kfree(evt);
- }
- spin_unlock_irqrestore(&rc->uwbd.event_list_lock, flags);
- return;
-}
-
-void uwbd_flush(struct uwb_rc *rc)
-{
- struct uwb_event *evt, *nxt;
-
- spin_lock_irq(&rc->uwbd.event_list_lock);
- list_for_each_entry_safe(evt, nxt, &rc->uwbd.event_list, list_node) {
- if (evt->rc == rc) {
- __uwb_rc_put(rc);
- list_del(&evt->list_node);
- if (evt->type == UWB_EVT_TYPE_NOTIF)
- kfree(evt->notif.rceb);
- kfree(evt);
- }
- }
- spin_unlock_irq(&rc->uwbd.event_list_lock);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Wireless Host Controller: Radio Control Interface (WHCI v0.95[2.3])
- * Radio Control command/event transport to the UWB stack
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * Initialize and hook up the Radio Control interface.
- *
- * For each device probed, creates an 'struct whcrc' which contains
- * just the representation of the UWB Radio Controller, and the logic
- * for reading notifications and passing them to the UWB Core.
- *
- * So we initialize all of those, register the UWB Radio Controller
- * and setup the notification/event handle to pipe the notifications
- * to the UWB management Daemon.
- *
- * Once uwb_rc_add() is called, the UWB stack takes control, resets
- * the radio and readies the device to take commands the UWB
- * API/user-space.
- *
- * Note this driver is just a transport driver; the commands are
- * formed at the UWB stack and given to this driver who will deliver
- * them to the hw and transfer the replies/notifications back to the
- * UWB stack through the UWB daemon (UWBD).
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include "uwb.h"
-#include "include/whci.h"
-#include "include/umc.h"
-
-#include "uwb-internal.h"
-
-/**
- * Descriptor for an instance of the UWB Radio Control Driver that
- * attaches to the URC interface of the WHCI PCI card.
- *
- * Unless there is a lock specific to the 'data members', all access
- * is protected by uwb_rc->mutex.
- */
-struct whcrc {
- struct umc_dev *umc_dev;
- struct uwb_rc *uwb_rc; /* UWB host controller */
-
- unsigned long area;
- void __iomem *rc_base;
- size_t rc_len;
- spinlock_t irq_lock;
-
- void *evt_buf, *cmd_buf;
- dma_addr_t evt_dma_buf, cmd_dma_buf;
- wait_queue_head_t cmd_wq;
- struct work_struct event_work;
-};
-
-/**
- * Execute an UWB RC command on WHCI/RC
- *
- * @rc: Instance of a Radio Controller that is a whcrc
- * @cmd: Buffer containing the RCCB and payload to execute
- * @cmd_size: Size of the command buffer.
- *
- * We copy the command into whcrc->cmd_buf (as it is pretty and
- * aligned`and physically contiguous) and then press the right keys in
- * the controller's URCCMD register to get it to read it. We might
- * have to wait for the cmd_sem to be open to us.
- *
- * NOTE: rc's mutex has to be locked
- */
-static int whcrc_cmd(struct uwb_rc *uwb_rc,
- const struct uwb_rccb *cmd, size_t cmd_size)
-{
- int result = 0;
- struct whcrc *whcrc = uwb_rc->priv;
- struct device *dev = &whcrc->umc_dev->dev;
- u32 urccmd;
-
- if (cmd_size >= 4096)
- return -EINVAL;
-
- /*
- * If the URC is halted, then the hardware has reset itself.
- * Attempt to recover by restarting the device and then return
- * an error as it's likely that the current command isn't
- * valid for a newly started RC.
- */
- if (le_readl(whcrc->rc_base + URCSTS) & URCSTS_HALTED) {
- dev_err(dev, "requesting reset of halted radio controller\n");
- uwb_rc_reset_all(uwb_rc);
- return -EIO;
- }
-
- result = wait_event_timeout(whcrc->cmd_wq,
- !(le_readl(whcrc->rc_base + URCCMD) & URCCMD_ACTIVE), HZ/2);
- if (result == 0) {
- dev_err(dev, "device is not ready to execute commands\n");
- return -ETIMEDOUT;
- }
-
- memmove(whcrc->cmd_buf, cmd, cmd_size);
- le_writeq(whcrc->cmd_dma_buf, whcrc->rc_base + URCCMDADDR);
-
- spin_lock(&whcrc->irq_lock);
- urccmd = le_readl(whcrc->rc_base + URCCMD);
- urccmd &= ~(URCCMD_EARV | URCCMD_SIZE_MASK);
- le_writel(urccmd | URCCMD_ACTIVE | URCCMD_IWR | cmd_size,
- whcrc->rc_base + URCCMD);
- spin_unlock(&whcrc->irq_lock);
-
- return 0;
-}
-
-static int whcrc_reset(struct uwb_rc *rc)
-{
- struct whcrc *whcrc = rc->priv;
-
- return umc_controller_reset(whcrc->umc_dev);
-}
-
-/**
- * Reset event reception mechanism and tell hw we are ready to get more
- *
- * We have read all the events in the event buffer, so we are ready to
- * reset it to the beginning.
- *
- * This is only called during initialization or after an event buffer
- * has been retired. This means we can be sure that event processing
- * is disabled and it's safe to update the URCEVTADDR register.
- *
- * There's no need to wait for the event processing to start as the
- * URC will not clear URCCMD_ACTIVE until (internal) event buffer
- * space is available.
- */
-static
-void whcrc_enable_events(struct whcrc *whcrc)
-{
- u32 urccmd;
-
- le_writeq(whcrc->evt_dma_buf, whcrc->rc_base + URCEVTADDR);
-
- spin_lock(&whcrc->irq_lock);
- urccmd = le_readl(whcrc->rc_base + URCCMD) & ~URCCMD_ACTIVE;
- le_writel(urccmd | URCCMD_EARV, whcrc->rc_base + URCCMD);
- spin_unlock(&whcrc->irq_lock);
-}
-
-static void whcrc_event_work(struct work_struct *work)
-{
- struct whcrc *whcrc = container_of(work, struct whcrc, event_work);
- size_t size;
- u64 urcevtaddr;
-
- urcevtaddr = le_readq(whcrc->rc_base + URCEVTADDR);
- size = urcevtaddr & URCEVTADDR_OFFSET_MASK;
-
- uwb_rc_neh_grok(whcrc->uwb_rc, whcrc->evt_buf, size);
- whcrc_enable_events(whcrc);
-}
-
-/**
- * Catch interrupts?
- *
- * We ack inmediately (and expect the hw to do the right thing and
- * raise another IRQ if things have changed :)
- */
-static
-irqreturn_t whcrc_irq_cb(int irq, void *_whcrc)
-{
- struct whcrc *whcrc = _whcrc;
- struct device *dev = &whcrc->umc_dev->dev;
- u32 urcsts;
-
- urcsts = le_readl(whcrc->rc_base + URCSTS);
- if (!(urcsts & URCSTS_INT_MASK))
- return IRQ_NONE;
- le_writel(urcsts & URCSTS_INT_MASK, whcrc->rc_base + URCSTS);
-
- if (urcsts & URCSTS_HSE) {
- dev_err(dev, "host system error -- hardware halted\n");
- /* FIXME: do something sensible here */
- goto out;
- }
- if (urcsts & URCSTS_ER)
- schedule_work(&whcrc->event_work);
- if (urcsts & URCSTS_RCI)
- wake_up_all(&whcrc->cmd_wq);
-out:
- return IRQ_HANDLED;
-}
-
-
-/**
- * Initialize a UMC RC interface: map regions, get (shared) IRQ
- */
-static
-int whcrc_setup_rc_umc(struct whcrc *whcrc)
-{
- int result = 0;
- struct device *dev = &whcrc->umc_dev->dev;
- struct umc_dev *umc_dev = whcrc->umc_dev;
-
- whcrc->area = umc_dev->resource.start;
- whcrc->rc_len = resource_size(&umc_dev->resource);
- result = -EBUSY;
- if (request_mem_region(whcrc->area, whcrc->rc_len, KBUILD_MODNAME) == NULL) {
- dev_err(dev, "can't request URC region (%zu bytes @ 0x%lx): %d\n",
- whcrc->rc_len, whcrc->area, result);
- goto error_request_region;
- }
-
- whcrc->rc_base = ioremap(whcrc->area, whcrc->rc_len);
- if (whcrc->rc_base == NULL) {
- dev_err(dev, "can't ioremap registers (%zu bytes @ 0x%lx): %d\n",
- whcrc->rc_len, whcrc->area, result);
- goto error_ioremap;
- }
-
- result = request_irq(umc_dev->irq, whcrc_irq_cb, IRQF_SHARED,
- KBUILD_MODNAME, whcrc);
- if (result < 0) {
- dev_err(dev, "can't allocate IRQ %d: %d\n",
- umc_dev->irq, result);
- goto error_request_irq;
- }
-
- result = -ENOMEM;
- whcrc->cmd_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE,
- &whcrc->cmd_dma_buf, GFP_KERNEL);
- if (whcrc->cmd_buf == NULL) {
- dev_err(dev, "Can't allocate cmd transfer buffer\n");
- goto error_cmd_buffer;
- }
-
- whcrc->evt_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE,
- &whcrc->evt_dma_buf, GFP_KERNEL);
- if (whcrc->evt_buf == NULL) {
- dev_err(dev, "Can't allocate evt transfer buffer\n");
- goto error_evt_buffer;
- }
- return 0;
-
-error_evt_buffer:
- dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf,
- whcrc->cmd_dma_buf);
-error_cmd_buffer:
- free_irq(umc_dev->irq, whcrc);
-error_request_irq:
- iounmap(whcrc->rc_base);
-error_ioremap:
- release_mem_region(whcrc->area, whcrc->rc_len);
-error_request_region:
- return result;
-}
-
-
-/**
- * Release RC's UMC resources
- */
-static
-void whcrc_release_rc_umc(struct whcrc *whcrc)
-{
- struct umc_dev *umc_dev = whcrc->umc_dev;
-
- dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->evt_buf,
- whcrc->evt_dma_buf);
- dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf,
- whcrc->cmd_dma_buf);
- free_irq(umc_dev->irq, whcrc);
- iounmap(whcrc->rc_base);
- release_mem_region(whcrc->area, whcrc->rc_len);
-}
-
-
-/**
- * whcrc_start_rc - start a WHCI radio controller
- * @whcrc: the radio controller to start
- *
- * Reset the UMC device, start the radio controller, enable events and
- * finally enable interrupts.
- */
-static int whcrc_start_rc(struct uwb_rc *rc)
-{
- struct whcrc *whcrc = rc->priv;
- struct device *dev = &whcrc->umc_dev->dev;
-
- /* Reset the thing */
- le_writel(URCCMD_RESET, whcrc->rc_base + URCCMD);
- if (whci_wait_for(dev, whcrc->rc_base + URCCMD, URCCMD_RESET, 0,
- 5000, "hardware reset") < 0)
- return -EBUSY;
-
- /* Set the event buffer, start the controller (enable IRQs later) */
- le_writel(0, whcrc->rc_base + URCINTR);
- le_writel(URCCMD_RS, whcrc->rc_base + URCCMD);
- if (whci_wait_for(dev, whcrc->rc_base + URCSTS, URCSTS_HALTED, 0,
- 5000, "radio controller start") < 0)
- return -ETIMEDOUT;
- whcrc_enable_events(whcrc);
- le_writel(URCINTR_EN_ALL, whcrc->rc_base + URCINTR);
- return 0;
-}
-
-
-/**
- * whcrc_stop_rc - stop a WHCI radio controller
- * @whcrc: the radio controller to stop
- *
- * Disable interrupts and cancel any pending event processing work
- * before clearing the Run/Stop bit.
- */
-static
-void whcrc_stop_rc(struct uwb_rc *rc)
-{
- struct whcrc *whcrc = rc->priv;
- struct umc_dev *umc_dev = whcrc->umc_dev;
-
- le_writel(0, whcrc->rc_base + URCINTR);
- cancel_work_sync(&whcrc->event_work);
-
- le_writel(0, whcrc->rc_base + URCCMD);
- whci_wait_for(&umc_dev->dev, whcrc->rc_base + URCSTS,
- URCSTS_HALTED, URCSTS_HALTED, 100, "radio controller stop");
-}
-
-static void whcrc_init(struct whcrc *whcrc)
-{
- spin_lock_init(&whcrc->irq_lock);
- init_waitqueue_head(&whcrc->cmd_wq);
- INIT_WORK(&whcrc->event_work, whcrc_event_work);
-}
-
-/**
- * Initialize the radio controller.
- *
- * NOTE: we setup whcrc->uwb_rc before calling uwb_rc_add(); in the
- * IRQ handler we use that to determine if the hw is ready to
- * handle events. Looks like a race condition, but it really is
- * not.
- */
-static
-int whcrc_probe(struct umc_dev *umc_dev)
-{
- int result;
- struct uwb_rc *uwb_rc;
- struct whcrc *whcrc;
- struct device *dev = &umc_dev->dev;
-
- result = -ENOMEM;
- uwb_rc = uwb_rc_alloc();
- if (uwb_rc == NULL) {
- dev_err(dev, "unable to allocate RC instance\n");
- goto error_rc_alloc;
- }
- whcrc = kzalloc(sizeof(*whcrc), GFP_KERNEL);
- if (whcrc == NULL) {
- dev_err(dev, "unable to allocate WHC-RC instance\n");
- goto error_alloc;
- }
- whcrc_init(whcrc);
- whcrc->umc_dev = umc_dev;
-
- result = whcrc_setup_rc_umc(whcrc);
- if (result < 0) {
- dev_err(dev, "Can't setup RC UMC interface: %d\n", result);
- goto error_setup_rc_umc;
- }
- whcrc->uwb_rc = uwb_rc;
-
- uwb_rc->owner = THIS_MODULE;
- uwb_rc->cmd = whcrc_cmd;
- uwb_rc->reset = whcrc_reset;
- uwb_rc->start = whcrc_start_rc;
- uwb_rc->stop = whcrc_stop_rc;
-
- result = uwb_rc_add(uwb_rc, dev, whcrc);
- if (result < 0)
- goto error_rc_add;
- umc_set_drvdata(umc_dev, whcrc);
- return 0;
-
-error_rc_add:
- whcrc_release_rc_umc(whcrc);
-error_setup_rc_umc:
- kfree(whcrc);
-error_alloc:
- uwb_rc_put(uwb_rc);
-error_rc_alloc:
- return result;
-}
-
-/**
- * Clean up the radio control resources
- *
- * When we up the command semaphore, everybody possibly held trying to
- * execute a command should be granted entry and then they'll see the
- * host is quiescing and up it (so it will chain to the next waiter).
- * This should not happen (in any case), as we can only remove when
- * there are no handles open...
- */
-static void whcrc_remove(struct umc_dev *umc_dev)
-{
- struct whcrc *whcrc = umc_get_drvdata(umc_dev);
- struct uwb_rc *uwb_rc = whcrc->uwb_rc;
-
- umc_set_drvdata(umc_dev, NULL);
- uwb_rc_rm(uwb_rc);
- whcrc_release_rc_umc(whcrc);
- kfree(whcrc);
- uwb_rc_put(uwb_rc);
-}
-
-static int whcrc_pre_reset(struct umc_dev *umc)
-{
- struct whcrc *whcrc = umc_get_drvdata(umc);
- struct uwb_rc *uwb_rc = whcrc->uwb_rc;
-
- uwb_rc_pre_reset(uwb_rc);
- return 0;
-}
-
-static int whcrc_post_reset(struct umc_dev *umc)
-{
- struct whcrc *whcrc = umc_get_drvdata(umc);
- struct uwb_rc *uwb_rc = whcrc->uwb_rc;
-
- return uwb_rc_post_reset(uwb_rc);
-}
-
-/* PCI device ID's that we handle [so it gets loaded] */
-static struct pci_device_id __used whcrc_id_table[] = {
- { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
- { /* empty last entry */ }
-};
-MODULE_DEVICE_TABLE(pci, whcrc_id_table);
-
-static struct umc_driver whcrc_driver = {
- .name = "whc-rc",
- .cap_id = UMC_CAP_ID_WHCI_RC,
- .probe = whcrc_probe,
- .remove = whcrc_remove,
- .pre_reset = whcrc_pre_reset,
- .post_reset = whcrc_post_reset,
-};
-
-static int __init whcrc_driver_init(void)
-{
- return umc_driver_register(&whcrc_driver);
-}
-module_init(whcrc_driver_init);
-
-static void __exit whcrc_driver_exit(void)
-{
- umc_driver_unregister(&whcrc_driver);
-}
-module_exit(whcrc_driver_exit);
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("Wireless Host Controller Radio Control Driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * WHCI UWB Multi-interface Controller enumerator.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-#include "include/whci.h"
-#include "include/umc.h"
-
-struct whci_card {
- struct pci_dev *pci;
- void __iomem *uwbbase;
- u8 n_caps;
- struct umc_dev *devs[0];
-};
-
-
-/* Fix faulty HW :( */
-static
-u64 whci_capdata_quirks(struct whci_card *card, u64 capdata)
-{
- u64 capdata_orig = capdata;
- struct pci_dev *pci_dev = card->pci;
- if (pci_dev->vendor == PCI_VENDOR_ID_INTEL
- && (pci_dev->device == 0x0c3b || pci_dev->device == 0004)
- && pci_dev->class == 0x0d1010) {
- switch (UWBCAPDATA_TO_CAP_ID(capdata)) {
- /* WLP capability has 0x100 bytes of aperture */
- case 0x80:
- capdata |= 0x40 << 8; break;
- /* WUSB capability has 0x80 bytes of aperture
- * and ID is 1 */
- case 0x02:
- capdata &= ~0xffff;
- capdata |= 0x2001;
- break;
- }
- }
- if (capdata_orig != capdata)
- dev_warn(&pci_dev->dev,
- "PCI v%04x d%04x c%06x#%02x: "
- "corrected capdata from %016Lx to %016Lx\n",
- pci_dev->vendor, pci_dev->device, pci_dev->class,
- (unsigned)UWBCAPDATA_TO_CAP_ID(capdata),
- (unsigned long long)capdata_orig,
- (unsigned long long)capdata);
- return capdata;
-}
-
-
-/**
- * whci_wait_for - wait for a WHCI register to be set
- *
- * Polls (for at most @max_ms ms) until '*@reg & @mask == @result'.
- */
-int whci_wait_for(struct device *dev, u32 __iomem *reg, u32 mask, u32 result,
- unsigned long max_ms, const char *tag)
-{
- unsigned t = 0;
- u32 val;
- for (;;) {
- val = le_readl(reg);
- if ((val & mask) == result)
- break;
- if (t >= max_ms) {
- dev_err(dev, "%s timed out\n", tag);
- return -ETIMEDOUT;
- }
- msleep(10);
- t += 10;
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(whci_wait_for);
-
-
-/*
- * NOTE: the capinfo and capdata registers are slightly different
- * (size and cap-id fields). So for cap #0, we need to fill
- * in. Size comes from the size of the register block
- * (statically calculated); cap_id comes from nowhere, we use
- * zero, that is reserved, for the radio controller, because
- * none was defined at the spec level.
- */
-static int whci_add_cap(struct whci_card *card, int n)
-{
- struct umc_dev *umc;
- u64 capdata;
- int bar, err;
-
- umc = umc_device_create(&card->pci->dev, n);
- if (umc == NULL)
- return -ENOMEM;
-
- capdata = le_readq(card->uwbbase + UWBCAPDATA(n));
-
- bar = UWBCAPDATA_TO_BAR(capdata) << 1;
-
- capdata = whci_capdata_quirks(card, capdata);
- /* Capability 0 is the radio controller. It's size is 32
- * bytes (WHCI0.95[2.3, T2-9]). */
- umc->version = UWBCAPDATA_TO_VERSION(capdata);
- umc->cap_id = n == 0 ? 0 : UWBCAPDATA_TO_CAP_ID(capdata);
- umc->bar = bar;
- umc->resource.start = pci_resource_start(card->pci, bar)
- + UWBCAPDATA_TO_OFFSET(capdata);
- umc->resource.end = umc->resource.start
- + (n == 0 ? 0x20 : UWBCAPDATA_TO_SIZE(capdata)) - 1;
- umc->resource.name = dev_name(&umc->dev);
- umc->resource.flags = card->pci->resource[bar].flags;
- umc->resource.parent = &card->pci->resource[bar];
- umc->irq = card->pci->irq;
-
- err = umc_device_register(umc);
- if (err < 0)
- goto error;
- card->devs[n] = umc;
- return 0;
-
-error:
- kfree(umc);
- return err;
-}
-
-static void whci_del_cap(struct whci_card *card, int n)
-{
- struct umc_dev *umc = card->devs[n];
-
- umc_device_unregister(umc);
-}
-
-static int whci_n_caps(struct pci_dev *pci)
-{
- void __iomem *uwbbase;
- u64 capinfo;
-
- uwbbase = pci_iomap(pci, 0, 8);
- if (!uwbbase)
- return -ENOMEM;
- capinfo = le_readq(uwbbase + UWBCAPINFO);
- pci_iounmap(pci, uwbbase);
-
- return UWBCAPINFO_TO_N_CAPS(capinfo);
-}
-
-static int whci_probe(struct pci_dev *pci, const struct pci_device_id *id)
-{
- struct whci_card *card;
- int err, n_caps, n;
-
- err = pci_enable_device(pci);
- if (err < 0)
- goto error;
- pci_enable_msi(pci);
- pci_set_master(pci);
- err = -ENXIO;
- if (!pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
- pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
- else if (!pci_set_dma_mask(pci, DMA_BIT_MASK(32)))
- pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
- else
- goto error_dma;
-
- err = n_caps = whci_n_caps(pci);
- if (n_caps < 0)
- goto error_ncaps;
-
- err = -ENOMEM;
- card = kzalloc(sizeof(struct whci_card)
- + sizeof(struct umc_dev *) * (n_caps + 1),
- GFP_KERNEL);
- if (card == NULL)
- goto error_kzalloc;
- card->pci = pci;
- card->n_caps = n_caps;
-
- err = -EBUSY;
- if (!request_mem_region(pci_resource_start(pci, 0),
- UWBCAPDATA_SIZE(card->n_caps),
- "whci (capability data)"))
- goto error_request_memregion;
- err = -ENOMEM;
- card->uwbbase = pci_iomap(pci, 0, UWBCAPDATA_SIZE(card->n_caps));
- if (!card->uwbbase)
- goto error_iomap;
-
- /* Add each capability. */
- for (n = 0; n <= card->n_caps; n++) {
- err = whci_add_cap(card, n);
- if (err < 0 && n == 0) {
- dev_err(&pci->dev, "cannot bind UWB radio controller:"
- " %d\n", err);
- goto error_bind;
- }
- if (err < 0)
- dev_warn(&pci->dev, "warning: cannot bind capability "
- "#%u: %d\n", n, err);
- }
- pci_set_drvdata(pci, card);
- return 0;
-
-error_bind:
- pci_iounmap(pci, card->uwbbase);
-error_iomap:
- release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps));
-error_request_memregion:
- kfree(card);
-error_kzalloc:
-error_ncaps:
-error_dma:
- pci_disable_msi(pci);
- pci_disable_device(pci);
-error:
- return err;
-}
-
-static void whci_remove(struct pci_dev *pci)
-{
- struct whci_card *card = pci_get_drvdata(pci);
- int n;
-
- pci_set_drvdata(pci, NULL);
- /* Unregister each capability in reverse (so the master device
- * is unregistered last). */
- for (n = card->n_caps; n >= 0 ; n--)
- whci_del_cap(card, n);
- pci_iounmap(pci, card->uwbbase);
- release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps));
- kfree(card);
- pci_disable_msi(pci);
- pci_disable_device(pci);
-}
-
-static struct pci_device_id whci_id_table[] = {
- { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
- { 0 },
-};
-MODULE_DEVICE_TABLE(pci, whci_id_table);
-
-
-static struct pci_driver whci_driver = {
- .name = "whci",
- .id_table = whci_id_table,
- .probe = whci_probe,
- .remove = whci_remove,
-};
-
-module_pci_driver(whci_driver);
-MODULE_DESCRIPTION("WHCI UWB Multi-interface Controller enumerator");
-MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
-MODULE_LICENSE("GPL");
+++ /dev/null
-#! /bin/bash
-#
-
-set -e
-
-progname=$(basename $0)
-function help
-{
- cat <<EOF
-Usage: $progname COMMAND DEVICEs [ARGS]
-
-Command for manipulating the pairing/authentication credentials of a
-Wireless USB device that supports wired-mode Cable-Based-Association.
-
-Works in conjunction with the wusb-cba.ko driver from http://linuxuwb.org.
-
-
-DEVICE
-
- sysfs path to the device to authenticate; for example, both this
- guys are the same:
-
- /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.1
- /sys/bus/usb/drivers/wusb-cbaf/1-4.4:1.1
-
-COMMAND/ARGS are
-
- start
-
- Start a WUSB host controller (by setting up a CHID)
-
- set-chid DEVICE HOST-CHID HOST-BANDGROUP HOST-NAME
-
- Sets host information in the device; after this you can call the
- get-cdid to see how does this device report itself to us.
-
- get-cdid DEVICE
-
- Get the device ID associated to the HOST-CHID we sent with
- 'set-chid'. We might not know about it.
-
- set-cc DEVICE
-
- If we allow the device to connect, set a random new CDID and CK
- (connection key). Device saves them for the next time it wants to
- connect wireless. We save them for that next time also so we can
- authenticate the device (when we see the CDID he uses to id
- itself) and the CK to crypto talk to it.
-
-CHID is always 16 hex bytes in 'XX YY ZZ...' form
-BANDGROUP is almost always 0001
-
-Examples:
-
- You can default most arguments to '' to get a sane value:
-
- $ $progname set-chid '' '' '' "My host name"
-
- A full sequence:
-
- $ $progname set-chid '' '' '' "My host name"
- $ $progname get-cdid ''
- $ $progname set-cc ''
-
-EOF
-}
-
-
-# Defaults
-# FIXME: CHID should come from a database :), band group from the host
-host_CHID="00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff"
-host_band_group="0001"
-host_name=$(hostname)
-
-devs="$(echo /sys/bus/usb/drivers/wusb-cbaf/[0-9]*)"
-hdevs="$(for h in /sys/class/uwb_rc/*/wusbhc; do readlink -f $h; done)"
-
-result=0
-case $1 in
- start)
- for dev in ${2:-$hdevs}
- do
- echo $host_CHID > $dev/wusb_chid
- echo I: started host $(basename $dev) >&2
- done
- ;;
- stop)
- for dev in ${2:-$hdevs}
- do
- echo 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > $dev/wusb_chid
- echo I: stopped host $(basename $dev) >&2
- done
- ;;
- set-chid)
- shift
- for dev in ${2:-$devs}; do
- echo "${4:-$host_name}" > $dev/wusb_host_name
- echo "${3:-$host_band_group}" > $dev/wusb_host_band_groups
- echo ${2:-$host_CHID} > $dev/wusb_chid
- done
- ;;
- get-cdid)
- for dev in ${2:-$devs}
- do
- cat $dev/wusb_cdid
- done
- ;;
- set-cc)
- for dev in ${2:-$devs}; do
- shift
- CDID="$(head --bytes=16 /dev/urandom | od -tx1 -An)"
- CK="$(head --bytes=16 /dev/urandom | od -tx1 -An)"
- echo "$CDID" > $dev/wusb_cdid
- echo "$CK" > $dev/wusb_ck
-
- echo I: CC set >&2
- echo "CHID: $(cat $dev/wusb_chid)"
- echo "CDID:$CDID"
- echo "CK: $CK"
- done
- ;;
- help|h|--help|-h)
- help
- ;;
- *)
- echo "E: Unknown usage" 1>&2
- help 1>&2
- result=1
-esac
-exit $result
+++ /dev/null
-================================
-Linux UWB + Wireless USB + WiNET
-================================
-
- Copyright (C) 2005-2006 Intel Corporation
-
- Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License version
- 2 as published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- 02110-1301, USA.
-
-
-Please visit http://bughost.org/thewiki/Design-overview.txt-1.8 for
-updated content.
-
- * Design-overview.txt-1.8
-
-This code implements a Ultra Wide Band stack for Linux, as well as
-drivers for the USB based UWB radio controllers defined in the
-Wireless USB 1.0 specification (including Wireless USB host controller
-and an Intel WiNET controller).
-
-.. Contents
- 1. Introduction
- 1. HWA: Host Wire adapters, your Wireless USB dongle
-
- 2. DWA: Device Wired Adaptor, a Wireless USB hub for wired
- devices
- 3. WHCI: Wireless Host Controller Interface, the PCI WUSB host
- adapter
- 2. The UWB stack
- 1. Devices and hosts: the basic structure
-
- 2. Host Controller life cycle
-
- 3. On the air: beacons and enumerating the radio neighborhood
-
- 4. Device lists
- 5. Bandwidth allocation
-
- 3. Wireless USB Host Controller drivers
-
- 4. Glossary
-
-
-Introduction
-============
-
-UWB is a wide-band communication protocol that is to serve also as the
-low-level protocol for others (much like TCP sits on IP). Currently
-these others are Wireless USB and TCP/IP, but seems Bluetooth and
-Firewire/1394 are coming along.
-
-UWB uses a band from roughly 3 to 10 GHz, transmitting at a max of
-~-41dB (or 0.074 uW/MHz--geography specific data is still being
-negotiated w/ regulators, so watch for changes). That band is divided in
-a bunch of ~1.5 GHz wide channels (or band groups) composed of three
-subbands/subchannels (528 MHz each). Each channel is independent of each
-other, so you could consider them different "busses". Initially this
-driver considers them all a single one.
-
-Radio time is divided in 65536 us long /superframes/, each one divided
-in 256 256us long /MASs/ (Media Allocation Slots), which are the basic
-time/media allocation units for transferring data. At the beginning of
-each superframe there is a Beacon Period (BP), where every device
-transmit its beacon on a single MAS. The length of the BP depends on how
-many devices are present and the length of their beacons.
-
-Devices have a MAC (fixed, 48 bit address) and a device (changeable, 16
-bit address) and send periodic beacons to advertise themselves and pass
-info on what they are and do. They advertise their capabilities and a
-bunch of other stuff.
-
-The different logical parts of this driver are:
-
- *
-
- *UWB*: the Ultra-Wide-Band stack -- manages the radio and
- associated spectrum to allow for devices sharing it. Allows to
- control bandwidth assignment, beaconing, scanning, etc
-
- *
-
- *WUSB*: the layer that sits on top of UWB to provide Wireless USB.
- The Wireless USB spec defines means to control a UWB radio and to
- do the actual WUSB.
-
-
-HWA: Host Wire adapters, your Wireless USB dongle
--------------------------------------------------
-
-WUSB also defines a device called a Host Wire Adaptor (HWA), which in
-mere terms is a USB dongle that enables your PC to have UWB and Wireless
-USB. The Wireless USB Host Controller in a HWA looks to the host like a
-[Wireless] USB controller connected via USB (!)
-
-The HWA itself is broken in two or three main interfaces:
-
- *
-
- *RC*: Radio control -- this implements an interface to the
- Ultra-Wide-Band radio controller. The driver for this implements a
- USB-based UWB Radio Controller to the UWB stack.
-
- *
-
- *HC*: the wireless USB host controller. It looks like a USB host
- whose root port is the radio and the WUSB devices connect to it.
- To the system it looks like a separate USB host. The driver (will)
- implement a USB host controller (similar to UHCI, OHCI or EHCI)
- for which the root hub is the radio...To reiterate: it is a USB
- controller that is connected via USB instead of PCI.
-
- *
-
- *WINET*: some HW provide a WiNET interface (IP over UWB). This
- package provides a driver for it (it looks like a network
- interface, winetX). The driver detects when there is a link up for
- their type and kick into gear.
-
-
-DWA: Device Wired Adaptor, a Wireless USB hub for wired devices
----------------------------------------------------------------
-
-These are the complement to HWAs. They are a USB host for connecting
-wired devices, but it is connected to your PC connected via Wireless
-USB. To the system it looks like yet another USB host. To the untrained
-eye, it looks like a hub that connects upstream wirelessly.
-
-We still offer no support for this; however, it should share a lot of
-code with the HWA-RC driver; there is a bunch of factorization work that
-has been done to support that in upcoming releases.
-
-
-WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter
--------------------------------------------------------------------
-
-This is your usual PCI device that implements WHCI. Similar in concept
-to EHCI, it allows your wireless USB devices (including DWAs) to connect
-to your host via a PCI interface. As in the case of the HWA, it has a
-Radio Control interface and the WUSB Host Controller interface per se.
-
-There is still no driver support for this, but will be in upcoming
-releases.
-
-
-The UWB stack
-=============
-
-The main mission of the UWB stack is to keep a tally of which devices
-are in radio proximity to allow drivers to connect to them. As well, it
-provides an API for controlling the local radio controllers (RCs from
-now on), such as to start/stop beaconing, scan, allocate bandwidth, etc.
-
-
-Devices and hosts: the basic structure
---------------------------------------
-
-The main building block here is the UWB device (struct uwb_dev). For
-each device that pops up in radio presence (ie: the UWB host receives a
-beacon from it) you get a struct uwb_dev that will show up in
-/sys/bus/uwb/devices.
-
-For each RC that is detected, a new struct uwb_rc and struct uwb_dev are
-created. An entry is also created in /sys/class/uwb_rc for each RC.
-
-Each RC driver is implemented by a separate driver that plugs into the
-interface that the UWB stack provides through a struct uwb_rc_ops. The
-spec creators have been nice enough to make the message format the same
-for HWA and WHCI RCs, so the driver is really a very thin transport that
-moves the requests from the UWB API to the device [/uwb_rc_ops->cmd()/]
-and sends the replies and notifications back to the API
-[/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that
-is chartered, among other things, to keep the tab of how the UWB radio
-neighborhood looks, creating and destroying devices as they show up or
-disappear.
-
-Command execution is very simple: a command block is sent and a event
-block or reply is expected back. For sending/receiving command/events, a
-handle called /neh/ (Notification/Event Handle) is opened with
-/uwb_rc_neh_open()/.
-
-The HWA-RC (USB dongle) driver (drivers/uwb/hwa-rc.c) does this job for
-the USB connected HWA. Eventually, drivers/whci-rc.c will do the same
-for the PCI connected WHCI controller.
-
-
-Host Controller life cycle
---------------------------
-
-So let's say we connect a dongle to the system: it is detected and
-firmware uploaded if needed [for Intel's i1480
-/drivers/uwb/ptc/usb.c:ptc_usb_probe()/] and then it is reenumerated.
-Now we have a real HWA device connected and
-/drivers/uwb/hwa-rc.c:hwarc_probe()/ picks it up, that will set up the
-Wire-Adaptor environment and then suck it into the UWB stack's vision of
-the world [/drivers/uwb/lc-rc.c:uwb_rc_add()/].
-
- *
-
- [*] The stack should put a new RC to scan for devices
- [/uwb_rc_scan()/] so it finds what's available around and tries to
- connect to them, but this is policy stuff and should be driven
- from user space. As of now, the operator is expected to do it
- manually; see the release notes for documentation on the procedure.
-
-When a dongle is disconnected, /drivers/uwb/hwa-rc.c:hwarc_disconnect()/
-takes time of tearing everything down safely (or not...).
-
-
-On the air: beacons and enumerating the radio neighborhood
-----------------------------------------------------------
-
-So assuming we have devices and we have agreed for a channel to connect
-on (let's say 9), we put the new RC to beacon:
-
- *
-
- $ echo 9 0 > /sys/class/uwb_rc/uwb0/beacon
-
-Now it is visible. If there were other devices in the same radio channel
-and beacon group (that's what the zero is for), the dongle's radio
-control interface will send beacon notifications on its
-notification/event endpoint (NEEP). The beacon notifications are part of
-the event stream that is funneled into the API with
-/drivers/uwb/neh.c:uwb_rc_neh_grok()/ and delivered to the UWBD, the UWB
-daemon through a notification list.
-
-UWBD wakes up and scans the event list; finds a beacon and adds it to
-the BEACON CACHE (/uwb_beca/). If he receives a number of beacons from
-the same device, he considers it to be 'onair' and creates a new device
-[/drivers/uwb/lc-dev.c:uwbd_dev_onair()/]. Similarly, when no beacons
-are received in some time, the device is considered gone and wiped out
-[uwbd calls periodically /uwb/beacon.c:uwb_beca_purge()/ that will purge
-the beacon cache of dead devices].
-
-
-Device lists
-------------
-
-All UWB devices are kept in the list of the struct bus_type uwb_bus_type.
-
-
-Bandwidth allocation
---------------------
-
-The UWB stack maintains a local copy of DRP availability through
-processing of incoming *DRP Availability Change* notifications. This
-local copy is currently used to present the current bandwidth
-availability to the user through the sysfs file
-/sys/class/uwb_rc/uwbx/bw_avail. In the future the bandwidth
-availability information will be used by the bandwidth reservation
-routines.
-
-The bandwidth reservation routines are in progress and are thus not
-present in the current release. When completed they will enable a user
-to initiate DRP reservation requests through interaction with sysfs. DRP
-reservation requests from remote UWB devices will also be handled. The
-bandwidth management done by the UWB stack will include callbacks to the
-higher layers will enable the higher layers to use the reservations upon
-completion. [Note: The bandwidth reservation work is in progress and
-subject to change.]
-
-
-Wireless USB Host Controller drivers
-====================================
-
-*WARNING* This section needs a lot of work!
-
-As explained above, there are three different types of HCs in the WUSB
-world: HWA-HC, DWA-HC and WHCI-HC.
-
-HWA-HC and DWA-HC share that they are Wire-Adapters (USB or WUSB
-connected controllers), and their transfer management system is almost
-identical. So is their notification delivery system.
-
-HWA-HC and WHCI-HC share that they are both WUSB host controllers, so
-they have to deal with WUSB device life cycle and maintenance, wireless
-root-hub
-
-HWA exposes a Host Controller interface (HWA-HC 0xe0/02/02). This has
-three endpoints (Notifications, Data Transfer In and Data Transfer
-Out--known as NEP, DTI and DTO in the code).
-
-We reserve UWB bandwidth for our Wireless USB Cluster, create a Cluster
-ID and tell the HC to use all that. Then we start it. This means the HC
-starts sending MMCs.
-
- *
-
- The MMCs are blocks of data defined somewhere in the WUSB1.0 spec
- that define a stream in the UWB channel time allocated for sending
- WUSB IEs (host to device commands/notifications) and Device
- Notifications (device initiated to host). Each host defines a
- unique Wireless USB cluster through MMCs. Devices can connect to a
- single cluster at the time. The IEs are Information Elements, and
- among them are the bandwidth allocations that tell each device
- when can they transmit or receive.
-
-Now it all depends on external stimuli.
-
-New device connection
----------------------
-
-A new device pops up, it scans the radio looking for MMCs that give out
-the existence of Wireless USB channels. Once one (or more) are found,
-selects which one to connect to. Sends a /DN_Connect/ (device
-notification connect) during the DNTS (Device Notification Time
-Slot--announced in the MMCs
-
-HC picks the /DN_Connect/ out (nep module sends to notif.c for delivery
-into /devconnect/). This process starts the authentication process for
-the device. First we allocate a /fake port/ and assign an
-unauthenticated address (128 to 255--what we really do is
-0x80 | fake_port_idx). We fiddle with the fake port status and /hub_wq/
-sees a new connection, so he moves on to enable the fake port with a reset.
-
-So now we are in the reset path -- we know we have a non-yet enumerated
-device with an unauthorized address; we ask user space to authenticate
-(FIXME: not yet done, similar to bluetooth pairing), then we do the key
-exchange (FIXME: not yet done) and issue a /set address 0/ to bring the
-device to the default state. Device is authenticated.
-
-From here, the USB stack takes control through the usb_hcd ops. hub_wq
-has seen the port status changes, as we have been toggling them. It will
-start enumerating and doing transfers through usb_hcd->urb_enqueue() to
-read descriptors and move our data.
-
-Device life cycle and keep alives
----------------------------------
-
-Every time there is a successful transfer to/from a device, we update a
-per-device activity timestamp. If not, every now and then we check and
-if the activity timestamp gets old, we ping the device by sending it a
-Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this
-arrives to us as a notification through
-devconnect.c:wusb_handle_dn_alive(). If a device times out, we
-disconnect it from the system (cleaning up internal information and
-toggling the bits in the fake hub port, which kicks hub_wq into removing
-the rest of the stuff).
-
-This is done through devconnect:__wusb_check_devs(), which will scan the
-device list looking for whom needs refreshing.
-
-If the device wants to disconnect, it will either die (ugly) or send a
-/DN_Disconnect/ that will prompt a disconnection from the system.
-
-Sending and receiving data
---------------------------
-
-Data is sent and received through /Remote Pipes/ (rpipes). An rpipe is
-/aimed/ at an endpoint in a WUSB device. This is the same for HWAs and
-DWAs.
-
-Each HC has a number of rpipes and buffers that can be assigned to them;
-when doing a data transfer (xfer), first the rpipe has to be aimed and
-prepared (buffers assigned), then we can start queueing requests for
-data in or out.
-
-Data buffers have to be segmented out before sending--so we send first a
-header (segment request) and then if there is any data, a data buffer
-immediately after to the DTI interface (yep, even the request). If our
-buffer is bigger than the max segment size, then we just do multiple
-requests.
-
-[This sucks, because doing USB scatter gatter in Linux is resource
-intensive, if any...not that the current approach is not. It just has to
-be cleaned up a lot :)].
-
-If reading, we don't send data buffers, just the segment headers saying
-we want to read segments.
-
-When the xfer is executed, we receive a notification that says data is
-ready in the DTI endpoint (handled through
-xfer.c:wa_handle_notif_xfer()). In there we read from the DTI endpoint a
-descriptor that gives us the status of the transfer, its identification
-(given when we issued it) and the segment number. If it was a data read,
-we issue another URB to read into the destination buffer the chunk of
-data coming out of the remote endpoint. Done, wait for the next guy. The
-callbacks for the URBs issued from here are the ones that will declare
-the xfer complete at some point and call its callback.
-
-Seems simple, but the implementation is not trivial.
-
- *
-
- *WARNING* Old!!
-
-The main xfer descriptor, wa_xfer (equivalent to a URB) contains an
-array of segments, tallys on segments and buffers and callback
-information. Buried in there is a lot of URBs for executing the segments
-and buffer transfers.
-
-For OUT xfers, there is an array of segments, one URB for each, another
-one of buffer URB. When submitting, we submit URBs for segment request
-1, buffer 1, segment 2, buffer 2...etc. Then we wait on the DTI for xfer
-result data; when all the segments are complete, we call the callback to
-finalize the transfer.
-
-For IN xfers, we only issue URBs for the segments we want to read and
-then wait for the xfer result data.
-
-URB mapping into xfers
-^^^^^^^^^^^^^^^^^^^^^^
-
-This is done by hwahc_op_urb_[en|de]queue(). In enqueue() we aim an
-rpipe to the endpoint where we have to transmit, create a transfer
-context (wa_xfer) and submit it. When the xfer is done, our callback is
-called and we assign the status bits and release the xfer resources.
-
-In dequeue() we are basically cancelling/aborting the transfer. We issue
-a xfer abort request to the HC, cancel all the URBs we had submitted
-and not yet done and when all that is done, the xfer callback will be
-called--this will call the URB callback.
-
-
-Glossary
-========
-
-*DWA* -- Device Wire Adapter
-
-USB host, wired for downstream devices, upstream connects wirelessly
-with Wireless USB.
-
-*EVENT* -- Response to a command on the NEEP
-
-*HWA* -- Host Wire Adapter / USB dongle for UWB and Wireless USB
-
-*NEH* -- Notification/Event Handle
-
-Handle/file descriptor for receiving notifications or events. The WA
-code requires you to get one of this to listen for notifications or
-events on the NEEP.
-
-*NEEP* -- Notification/Event EndPoint
-
-Stuff related to the management of the first endpoint of a HWA USB
-dongle that is used to deliver an stream of events and notifications to
-the host.
-
-*NOTIFICATION* -- Message coming in the NEEP as response to something.
-
-*RC* -- Radio Control
-
-Design-overview.txt-1.8 (last edited 2006-11-04 12:22:24 by
-InakyPerezGonzalez)
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-#
-# Wireless USB Core configuration
-#
-config USB_WUSB
- tristate "Enable Wireless USB extensions"
- depends on UWB && USB
- select CRYPTO
- select CRYPTO_AES
- select CRYPTO_CCM
- help
- Enable the host-side support for Wireless USB.
-
- To compile this support select Y (built in). It is safe to
- select even if you don't have the hardware.
-
-config USB_WUSB_CBAF
- tristate "Support WUSB Cable Based Association (CBA)"
- depends on USB
- help
- Some WUSB devices support Cable Based Association. It's used to
- enable the secure communication between the host and the
- device.
-
- Enable this option if your WUSB device must to be connected
- via wired USB before establishing a wireless link.
-
- It is safe to select even if you don't have a compatible
- hardware.
-
-config USB_WUSB_CBAF_DEBUG
- bool "Enable CBA debug messages"
- depends on USB_WUSB_CBAF
- help
- Say Y here if you want the CBA to produce a bunch of debug messages
- to the system log. Select this if you are having a problem with
- CBA support and want to see more of what is going on.
-
-source "drivers/staging/wusbcore/host/Kconfig"
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_USB_WUSB_CBAF_DEBUG) := -DDEBUG
-
-obj-$(CONFIG_USB_WUSB) += wusbcore.o
-obj-$(CONFIG_USB_HWA_HCD) += wusb-wa.o
-obj-$(CONFIG_USB_WUSB_CBAF) += wusb-cbaf.o
-
-
-wusbcore-y := \
- crypto.o \
- devconnect.o \
- dev-sysfs.o \
- mmc.o \
- pal.o \
- rh.o \
- reservation.o \
- security.o \
- wusbhc.o
-
-wusb-cbaf-y := cbaf.o
-
-wusb-wa-y := \
- wa-hc.o \
- wa-nep.o \
- wa-rpipe.o \
- wa-xfer.o
-
-obj-y += host/
+++ /dev/null
-TODO: Remove in late 2019 unless there are users
-
-There seems to not be any real wireless USB devices anywhere in the wild
-anymore. It turned out to be a failed technology :(
-
-This will be removed from the tree if no one objects.
-
-Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless USB - Cable Based Association
- *
- *
- * Copyright (C) 2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- *
- * WUSB devices have to be paired (associated in WUSB lingo) so
- * that they can connect to the system.
- *
- * One way of pairing is using CBA-Cable Based Association. First
- * time you plug the device with a cable, association is done between
- * host and device and subsequent times, you can connect wirelessly
- * without having to associate again. That's the idea.
- *
- * This driver does nothing Earth shattering. It just provides an
- * interface to chat with the wire-connected device so we can get a
- * CDID (device ID) that might have been previously associated to a
- * CHID (host ID) and to set up a new <CHID,CDID,CK> triplet
- * (connection context), with the CK being the secret, or connection
- * key. This is the pairing data.
- *
- * When a device with the CBA capability connects, the probe routine
- * just creates a bunch of sysfs files that a user space enumeration
- * manager uses to allow it to connect wirelessly to the system or not.
- *
- * The process goes like this:
- *
- * 1. Device plugs, cbaf is loaded, notifications happen.
- *
- * 2. The connection manager (CM) sees a device with CBAF capability
- * (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE).
- *
- * 3. The CM writes the host name, supported band groups, and the CHID
- * (host ID) into the wusb_host_name, wusb_host_band_groups and
- * wusb_chid files. These get sent to the device and the CDID (if
- * any) for this host is requested.
- *
- * 4. The CM can verify that the device's supported band groups
- * (wusb_device_band_groups) are compatible with the host.
- *
- * 5. The CM reads the wusb_cdid file.
- *
- * 6. The CM looks up its database
- *
- * 6.1 If it has a matching CHID,CDID entry, the device has been
- * authorized before (paired) and nothing further needs to be
- * done.
- *
- * 6.2 If the CDID is zero (or the CM doesn't find a matching CDID in
- * its database), the device is assumed to be not known. The CM
- * may associate the host with device by: writing a randomly
- * generated CDID to wusb_cdid and then a random CK to wusb_ck
- * (this uploads the new CC to the device).
- *
- * CMD may choose to prompt the user before associating with a new
- * device.
- *
- * 7. Device is unplugged.
- *
- * When the device tries to connect wirelessly, it will present its
- * CDID to the WUSB host controller. The CM will query the
- * database. If the CHID/CDID pair found, it will (with a 4-way
- * handshake) challenge the device to demonstrate it has the CK secret
- * key (from our database) without actually exchanging it. Once
- * satisfied, crypto keys are derived from the CK, the device is
- * connected and all communication is encrypted.
- *
- * References:
- * [WUSB-AM] Association Models Supplement to the Certified Wireless
- * Universal Serial Bus Specification, version 1.0.
- */
-#include <linux/module.h>
-#include <linux/ctype.h>
-#include <linux/usb.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/random.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include "../uwb/uwb.h"
-#include "include/wusb.h"
-#include "include/association.h"
-
-#define CBA_NAME_LEN 0x40 /* [WUSB-AM] table 4-7 */
-
-/* An instance of a Cable-Based-Association-Framework device */
-struct cbaf {
- struct usb_device *usb_dev;
- struct usb_interface *usb_iface;
- void *buffer;
- size_t buffer_size;
-
- struct wusb_ckhdid chid;
- char host_name[CBA_NAME_LEN];
- u16 host_band_groups;
-
- struct wusb_ckhdid cdid;
- char device_name[CBA_NAME_LEN];
- u16 device_band_groups;
-
- struct wusb_ckhdid ck;
-};
-
-/*
- * Verify that a CBAF USB-interface has what we need
- *
- * According to [WUSB-AM], CBA devices should provide at least two
- * interfaces:
- * - RETRIEVE_HOST_INFO
- * - ASSOCIATE
- *
- * If the device doesn't provide these interfaces, we do not know how
- * to deal with it.
- */
-static int cbaf_check(struct cbaf *cbaf)
-{
- int result;
- struct device *dev = &cbaf->usb_iface->dev;
- struct wusb_cbaf_assoc_info *assoc_info;
- struct wusb_cbaf_assoc_request *assoc_request;
- size_t assoc_size;
- void *itr, *top;
- int ar_rhi = 0, ar_assoc = 0;
-
- result = usb_control_msg(
- cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0),
- CBAF_REQ_GET_ASSOCIATION_INFORMATION,
- USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- cbaf->buffer, cbaf->buffer_size, USB_CTRL_GET_TIMEOUT);
- if (result < 0) {
- dev_err(dev, "Cannot get available association types: %d\n",
- result);
- return result;
- }
-
- assoc_info = cbaf->buffer;
- if (result < sizeof(*assoc_info)) {
- dev_err(dev, "Not enough data to decode association info "
- "header (%zu vs %zu bytes required)\n",
- (size_t)result, sizeof(*assoc_info));
- return result;
- }
-
- assoc_size = le16_to_cpu(assoc_info->Length);
- if (result < assoc_size) {
- dev_err(dev, "Not enough data to decode association info "
- "(%zu vs %zu bytes required)\n",
- (size_t)assoc_size, sizeof(*assoc_info));
- return result;
- }
- /*
- * From now on, we just verify, but won't error out unless we
- * don't find the AR_TYPE_WUSB_{RETRIEVE_HOST_INFO,ASSOCIATE}
- * types.
- */
- itr = cbaf->buffer + sizeof(*assoc_info);
- top = cbaf->buffer + assoc_size;
- dev_dbg(dev, "Found %u association requests (%zu bytes)\n",
- assoc_info->NumAssociationRequests, assoc_size);
-
- while (itr < top) {
- u16 ar_type, ar_subtype;
- u32 ar_size;
- const char *ar_name;
-
- assoc_request = itr;
-
- if (top - itr < sizeof(*assoc_request)) {
- dev_err(dev, "Not enough data to decode association "
- "request (%zu vs %zu bytes needed)\n",
- top - itr, sizeof(*assoc_request));
- break;
- }
-
- ar_type = le16_to_cpu(assoc_request->AssociationTypeId);
- ar_subtype = le16_to_cpu(assoc_request->AssociationSubTypeId);
- ar_size = le32_to_cpu(assoc_request->AssociationTypeInfoSize);
- ar_name = "unknown";
-
- switch (ar_type) {
- case AR_TYPE_WUSB:
- /* Verify we have what is mandated by [WUSB-AM]. */
- switch (ar_subtype) {
- case AR_TYPE_WUSB_RETRIEVE_HOST_INFO:
- ar_name = "RETRIEVE_HOST_INFO";
- ar_rhi = 1;
- break;
- case AR_TYPE_WUSB_ASSOCIATE:
- /* send assoc data */
- ar_name = "ASSOCIATE";
- ar_assoc = 1;
- break;
- }
- break;
- }
-
- dev_dbg(dev, "Association request #%02u: 0x%04x/%04x "
- "(%zu bytes): %s\n",
- assoc_request->AssociationDataIndex, ar_type,
- ar_subtype, (size_t)ar_size, ar_name);
-
- itr += sizeof(*assoc_request);
- }
-
- if (!ar_rhi) {
- dev_err(dev, "Missing RETRIEVE_HOST_INFO association "
- "request\n");
- return -EINVAL;
- }
- if (!ar_assoc) {
- dev_err(dev, "Missing ASSOCIATE association request\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static const struct wusb_cbaf_host_info cbaf_host_info_defaults = {
- .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId,
- .AssociationTypeId = cpu_to_le16(AR_TYPE_WUSB),
- .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId,
- .AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_RETRIEVE_HOST_INFO),
- .CHID_hdr = WUSB_AR_CHID,
- .LangID_hdr = WUSB_AR_LangID,
- .HostFriendlyName_hdr = WUSB_AR_HostFriendlyName,
-};
-
-/* Send WUSB host information (CHID and name) to a CBAF device */
-static int cbaf_send_host_info(struct cbaf *cbaf)
-{
- struct wusb_cbaf_host_info *hi;
- size_t name_len;
- size_t hi_size;
-
- hi = cbaf->buffer;
- memset(hi, 0, sizeof(*hi));
- *hi = cbaf_host_info_defaults;
- hi->CHID = cbaf->chid;
- hi->LangID = 0; /* FIXME: I guess... */
- strlcpy(hi->HostFriendlyName, cbaf->host_name, CBA_NAME_LEN);
- name_len = strlen(cbaf->host_name);
- hi->HostFriendlyName_hdr.len = cpu_to_le16(name_len);
- hi_size = sizeof(*hi) + name_len;
-
- return usb_control_msg(cbaf->usb_dev,
- usb_sndctrlpipe(cbaf->usb_dev, 0),
- CBAF_REQ_SET_ASSOCIATION_RESPONSE,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0x0101,
- cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- hi, hi_size, USB_CTRL_SET_TIMEOUT);
-}
-
-/*
- * Get device's information (CDID) associated to CHID
- *
- * The device will return it's information (CDID, name, bandgroups)
- * associated to the CHID we have set before, or 0 CDID and default
- * name and bandgroup if no CHID set or unknown.
- */
-static int cbaf_cdid_get(struct cbaf *cbaf)
-{
- int result;
- struct device *dev = &cbaf->usb_iface->dev;
- struct wusb_cbaf_device_info *di;
- size_t needed;
-
- di = cbaf->buffer;
- result = usb_control_msg(
- cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0),
- CBAF_REQ_GET_ASSOCIATION_REQUEST,
- USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0x0200, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- di, cbaf->buffer_size, USB_CTRL_GET_TIMEOUT);
- if (result < 0) {
- dev_err(dev, "Cannot request device information: %d\n",
- result);
- return result;
- }
-
- needed = result < sizeof(*di) ? sizeof(*di) : le32_to_cpu(di->Length);
- if (result < needed) {
- dev_err(dev, "Not enough data in DEVICE_INFO reply (%zu vs "
- "%zu bytes needed)\n", (size_t)result, needed);
- return -ENOENT;
- }
-
- strlcpy(cbaf->device_name, di->DeviceFriendlyName, CBA_NAME_LEN);
- cbaf->cdid = di->CDID;
- cbaf->device_band_groups = le16_to_cpu(di->BandGroups);
-
- return 0;
-}
-
-static ssize_t cbaf_wusb_chid_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
-
- return sprintf(buf, "%16ph\n", cbaf->chid.data);
-}
-
-static ssize_t cbaf_wusb_chid_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- ssize_t result;
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
-
- result = sscanf(buf,
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx",
- &cbaf->chid.data[0] , &cbaf->chid.data[1],
- &cbaf->chid.data[2] , &cbaf->chid.data[3],
- &cbaf->chid.data[4] , &cbaf->chid.data[5],
- &cbaf->chid.data[6] , &cbaf->chid.data[7],
- &cbaf->chid.data[8] , &cbaf->chid.data[9],
- &cbaf->chid.data[10], &cbaf->chid.data[11],
- &cbaf->chid.data[12], &cbaf->chid.data[13],
- &cbaf->chid.data[14], &cbaf->chid.data[15]);
-
- if (result != 16)
- return -EINVAL;
-
- result = cbaf_send_host_info(cbaf);
- if (result < 0)
- return result;
- result = cbaf_cdid_get(cbaf);
- if (result < 0)
- return result;
- return size;
-}
-static DEVICE_ATTR(wusb_chid, 0600, cbaf_wusb_chid_show, cbaf_wusb_chid_store);
-
-static ssize_t cbaf_wusb_host_name_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
-
- return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->host_name);
-}
-
-static ssize_t cbaf_wusb_host_name_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- ssize_t result;
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
-
- result = sscanf(buf, "%63s", cbaf->host_name);
- if (result != 1)
- return -EINVAL;
-
- return size;
-}
-static DEVICE_ATTR(wusb_host_name, 0600, cbaf_wusb_host_name_show,
- cbaf_wusb_host_name_store);
-
-static ssize_t cbaf_wusb_host_band_groups_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
-
- return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->host_band_groups);
-}
-
-static ssize_t cbaf_wusb_host_band_groups_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- ssize_t result;
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
- u16 band_groups = 0;
-
- result = sscanf(buf, "%04hx", &band_groups);
- if (result != 1)
- return -EINVAL;
-
- cbaf->host_band_groups = band_groups;
-
- return size;
-}
-
-static DEVICE_ATTR(wusb_host_band_groups, 0600,
- cbaf_wusb_host_band_groups_show,
- cbaf_wusb_host_band_groups_store);
-
-static const struct wusb_cbaf_device_info cbaf_device_info_defaults = {
- .Length_hdr = WUSB_AR_Length,
- .CDID_hdr = WUSB_AR_CDID,
- .BandGroups_hdr = WUSB_AR_BandGroups,
- .LangID_hdr = WUSB_AR_LangID,
- .DeviceFriendlyName_hdr = WUSB_AR_DeviceFriendlyName,
-};
-
-static ssize_t cbaf_wusb_cdid_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
-
- return sprintf(buf, "%16ph\n", cbaf->cdid.data);
-}
-
-static ssize_t cbaf_wusb_cdid_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- ssize_t result;
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
- struct wusb_ckhdid cdid;
-
- result = sscanf(buf,
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx",
- &cdid.data[0] , &cdid.data[1],
- &cdid.data[2] , &cdid.data[3],
- &cdid.data[4] , &cdid.data[5],
- &cdid.data[6] , &cdid.data[7],
- &cdid.data[8] , &cdid.data[9],
- &cdid.data[10], &cdid.data[11],
- &cdid.data[12], &cdid.data[13],
- &cdid.data[14], &cdid.data[15]);
- if (result != 16)
- return -EINVAL;
-
- cbaf->cdid = cdid;
-
- return size;
-}
-static DEVICE_ATTR(wusb_cdid, 0600, cbaf_wusb_cdid_show, cbaf_wusb_cdid_store);
-
-static ssize_t cbaf_wusb_device_band_groups_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
-
- return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->device_band_groups);
-}
-
-static DEVICE_ATTR(wusb_device_band_groups, 0600,
- cbaf_wusb_device_band_groups_show,
- NULL);
-
-static ssize_t cbaf_wusb_device_name_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
-
- return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->device_name);
-}
-static DEVICE_ATTR(wusb_device_name, 0600, cbaf_wusb_device_name_show, NULL);
-
-static const struct wusb_cbaf_cc_data cbaf_cc_data_defaults = {
- .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId,
- .AssociationTypeId = cpu_to_le16(AR_TYPE_WUSB),
- .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId,
- .AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_ASSOCIATE),
- .Length_hdr = WUSB_AR_Length,
- .Length = cpu_to_le32(sizeof(struct wusb_cbaf_cc_data)),
- .ConnectionContext_hdr = WUSB_AR_ConnectionContext,
- .BandGroups_hdr = WUSB_AR_BandGroups,
-};
-
-static const struct wusb_cbaf_cc_data_fail cbaf_cc_data_fail_defaults = {
- .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId,
- .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId,
- .Length_hdr = WUSB_AR_Length,
- .AssociationStatus_hdr = WUSB_AR_AssociationStatus,
-};
-
-/*
- * Send a new CC to the device.
- */
-static int cbaf_cc_upload(struct cbaf *cbaf)
-{
- int result;
- struct device *dev = &cbaf->usb_iface->dev;
- struct wusb_cbaf_cc_data *ccd;
-
- ccd = cbaf->buffer;
- *ccd = cbaf_cc_data_defaults;
- ccd->CHID = cbaf->chid;
- ccd->CDID = cbaf->cdid;
- ccd->CK = cbaf->ck;
- ccd->BandGroups = cpu_to_le16(cbaf->host_band_groups);
-
- dev_dbg(dev, "Trying to upload CC:\n");
- dev_dbg(dev, " CHID %16ph\n", ccd->CHID.data);
- dev_dbg(dev, " CDID %16ph\n", ccd->CDID.data);
- dev_dbg(dev, " Bandgroups 0x%04x\n", cbaf->host_band_groups);
-
- result = usb_control_msg(
- cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0),
- CBAF_REQ_SET_ASSOCIATION_RESPONSE,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0x0201, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- ccd, sizeof(*ccd), USB_CTRL_SET_TIMEOUT);
-
- return result;
-}
-
-static ssize_t cbaf_wusb_ck_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- ssize_t result;
- struct usb_interface *iface = to_usb_interface(dev);
- struct cbaf *cbaf = usb_get_intfdata(iface);
-
- result = sscanf(buf,
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx",
- &cbaf->ck.data[0] , &cbaf->ck.data[1],
- &cbaf->ck.data[2] , &cbaf->ck.data[3],
- &cbaf->ck.data[4] , &cbaf->ck.data[5],
- &cbaf->ck.data[6] , &cbaf->ck.data[7],
- &cbaf->ck.data[8] , &cbaf->ck.data[9],
- &cbaf->ck.data[10], &cbaf->ck.data[11],
- &cbaf->ck.data[12], &cbaf->ck.data[13],
- &cbaf->ck.data[14], &cbaf->ck.data[15]);
- if (result != 16)
- return -EINVAL;
-
- result = cbaf_cc_upload(cbaf);
- if (result < 0)
- return result;
-
- return size;
-}
-static DEVICE_ATTR(wusb_ck, 0600, NULL, cbaf_wusb_ck_store);
-
-static struct attribute *cbaf_dev_attrs[] = {
- &dev_attr_wusb_host_name.attr,
- &dev_attr_wusb_host_band_groups.attr,
- &dev_attr_wusb_chid.attr,
- &dev_attr_wusb_cdid.attr,
- &dev_attr_wusb_device_name.attr,
- &dev_attr_wusb_device_band_groups.attr,
- &dev_attr_wusb_ck.attr,
- NULL,
-};
-
-static const struct attribute_group cbaf_dev_attr_group = {
- .name = NULL, /* we want them in the same directory */
- .attrs = cbaf_dev_attrs,
-};
-
-static int cbaf_probe(struct usb_interface *iface,
- const struct usb_device_id *id)
-{
- struct cbaf *cbaf;
- struct device *dev = &iface->dev;
- int result = -ENOMEM;
-
- cbaf = kzalloc(sizeof(*cbaf), GFP_KERNEL);
- if (cbaf == NULL)
- goto error_kzalloc;
- cbaf->buffer = kmalloc(512, GFP_KERNEL);
- if (cbaf->buffer == NULL)
- goto error_kmalloc_buffer;
-
- cbaf->buffer_size = 512;
- cbaf->usb_dev = usb_get_dev(interface_to_usbdev(iface));
- cbaf->usb_iface = usb_get_intf(iface);
- result = cbaf_check(cbaf);
- if (result < 0) {
- dev_err(dev, "This device is not WUSB-CBAF compliant and is not supported yet.\n");
- goto error_check;
- }
-
- result = sysfs_create_group(&dev->kobj, &cbaf_dev_attr_group);
- if (result < 0) {
- dev_err(dev, "Can't register sysfs attr group: %d\n", result);
- goto error_create_group;
- }
- usb_set_intfdata(iface, cbaf);
- return 0;
-
-error_create_group:
-error_check:
- usb_put_intf(iface);
- usb_put_dev(cbaf->usb_dev);
- kfree(cbaf->buffer);
-error_kmalloc_buffer:
- kfree(cbaf);
-error_kzalloc:
- return result;
-}
-
-static void cbaf_disconnect(struct usb_interface *iface)
-{
- struct cbaf *cbaf = usb_get_intfdata(iface);
- struct device *dev = &iface->dev;
- sysfs_remove_group(&dev->kobj, &cbaf_dev_attr_group);
- usb_set_intfdata(iface, NULL);
- usb_put_intf(iface);
- usb_put_dev(cbaf->usb_dev);
- kfree(cbaf->buffer);
- /* paranoia: clean up crypto keys */
- kzfree(cbaf);
-}
-
-static const struct usb_device_id cbaf_id_table[] = {
- { USB_INTERFACE_INFO(0xef, 0x03, 0x01), },
- { },
-};
-MODULE_DEVICE_TABLE(usb, cbaf_id_table);
-
-static struct usb_driver cbaf_driver = {
- .name = "wusb-cbaf",
- .id_table = cbaf_id_table,
- .probe = cbaf_probe,
- .disconnect = cbaf_disconnect,
-};
-
-module_usb_driver(cbaf_driver);
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("Wireless USB Cable Based Association");
-MODULE_LICENSE("GPL");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Ultra Wide Band
- * AES-128 CCM Encryption
- *
- * Copyright (C) 2007 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * We don't do any encryption here; we use the Linux Kernel's AES-128
- * crypto modules to construct keys and payload blocks in a way
- * defined by WUSB1.0[6]. Check the erratas, as typos are are patched
- * there.
- *
- * Thanks a zillion to John Keys for his help and clarifications over
- * the designed-by-a-committee text.
- *
- * So the idea is that there is this basic Pseudo-Random-Function
- * defined in WUSB1.0[6.5] which is the core of everything. It works
- * by tweaking some blocks, AES crypting them and then xoring
- * something else with them (this seems to be called CBC(AES) -- can
- * you tell I know jack about crypto?). So we just funnel it into the
- * Linux Crypto API.
- *
- * We leave a crypto test module so we can verify that vectors match,
- * every now and then.
- *
- * Block size: 16 bytes -- AES seems to do things in 'block sizes'. I
- * am learning a lot...
- *
- * Conveniently, some data structures that need to be
- * funneled through AES are...16 bytes in size!
- */
-
-#include <crypto/aes.h>
-#include <crypto/algapi.h>
-#include <crypto/hash.h>
-#include <crypto/skcipher.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/scatterlist.h>
-#include "../uwb/uwb.h"
-#include "include/wusb.h"
-
-static int debug_crypto_verify;
-
-module_param(debug_crypto_verify, int, 0);
-MODULE_PARM_DESC(debug_crypto_verify, "verify the key generation algorithms");
-
-static void wusb_key_dump(const void *buf, size_t len)
-{
- print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_OFFSET, 16, 1,
- buf, len, 0);
-}
-
-/*
- * Block of data, as understood by AES-CCM
- *
- * The code assumes this structure is nothing but a 16 byte array
- * (packed in a struct to avoid common mess ups that I usually do with
- * arrays and enforcing type checking).
- */
-struct aes_ccm_block {
- u8 data[16];
-} __attribute__((packed));
-
-/*
- * Counter-mode Blocks (WUSB1.0[6.4])
- *
- * According to CCM (or so it seems), for the purpose of calculating
- * the MIC, the message is broken in N counter-mode blocks, B0, B1,
- * ... BN.
- *
- * B0 contains flags, the CCM nonce and l(m).
- *
- * B1 contains l(a), the MAC header, the encryption offset and padding.
- *
- * If EO is nonzero, additional blocks are built from payload bytes
- * until EO is exhausted (FIXME: padding to 16 bytes, I guess). The
- * padding is not xmitted.
- */
-
-/* WUSB1.0[T6.4] */
-struct aes_ccm_b0 {
- u8 flags; /* 0x59, per CCM spec */
- struct aes_ccm_nonce ccm_nonce;
- __be16 lm;
-} __attribute__((packed));
-
-/* WUSB1.0[T6.5] */
-struct aes_ccm_b1 {
- __be16 la;
- u8 mac_header[10];
- __le16 eo;
- u8 security_reserved; /* This is always zero */
- u8 padding; /* 0 */
-} __attribute__((packed));
-
-/*
- * Encryption Blocks (WUSB1.0[6.4.4])
- *
- * CCM uses Ax blocks to generate a keystream with which the MIC and
- * the message's payload are encoded. A0 always encrypts/decrypts the
- * MIC. Ax (x>0) are used for the successive payload blocks.
- *
- * The x is the counter, and is increased for each block.
- */
-struct aes_ccm_a {
- u8 flags; /* 0x01, per CCM spec */
- struct aes_ccm_nonce ccm_nonce;
- __be16 counter; /* Value of x */
-} __attribute__((packed));
-
-/* Scratch space for MAC calculations. */
-struct wusb_mac_scratch {
- struct aes_ccm_b0 b0;
- struct aes_ccm_b1 b1;
- struct aes_ccm_a ax;
-};
-
-/*
- * CC-MAC function WUSB1.0[6.5]
- *
- * Take a data string and produce the encrypted CBC Counter-mode MIC
- *
- * Note the names for most function arguments are made to (more or
- * less) match those used in the pseudo-function definition given in
- * WUSB1.0[6.5].
- *
- * @tfm_cbc: CBC(AES) blkcipher handle (initialized)
- *
- * @tfm_aes: AES cipher handle (initialized)
- *
- * @mic: buffer for placing the computed MIC (Message Integrity
- * Code). This is exactly 8 bytes, and we expect the buffer to
- * be at least eight bytes in length.
- *
- * @key: 128 bit symmetric key
- *
- * @n: CCM nonce
- *
- * @a: ASCII string, 14 bytes long (I guess zero padded if needed;
- * we use exactly 14 bytes).
- *
- * @b: data stream to be processed
- *
- * @blen: size of b...
- *
- * Still not very clear how this is done, but looks like this: we
- * create block B0 (as WUSB1.0[6.5] says), then we AES-crypt it with
- * @key. We bytewise xor B0 with B1 (1) and AES-crypt that. Then we
- * take the payload and divide it in blocks (16 bytes), xor them with
- * the previous crypto result (16 bytes) and crypt it, repeat the next
- * block with the output of the previous one, rinse wash. So we use
- * the CBC-MAC(AES) shash, that does precisely that. The IV (Initial
- * Vector) is 16 bytes and is set to zero, so
- *
- * (1) Created as 6.5 says, again, using as l(a) 'Blen + 14', and
- * using the 14 bytes of @a to fill up
- * b1.{mac_header,e0,security_reserved,padding}.
- *
- * NOTE: The definition of l(a) in WUSB1.0[6.5] vs the definition of
- * l(m) is orthogonal, they bear no relationship, so it is not
- * in conflict with the parameter's relation that
- * WUSB1.0[6.4.2]) defines.
- *
- * NOTE: WUSB1.0[A.1]: Host Nonce is missing a nibble? (1e); fixed in
- * first errata released on 2005/07.
- *
- * NOTE: we need to clean IV to zero at each invocation to make sure
- * we start with a fresh empty Initial Vector, so that the CBC
- * works ok.
- *
- * NOTE: blen is not aligned to a block size, we'll pad zeros, that's
- * what sg[4] is for. Maybe there is a smarter way to do this.
- */
-static int wusb_ccm_mac(struct crypto_shash *tfm_cbcmac,
- struct wusb_mac_scratch *scratch,
- void *mic,
- const struct aes_ccm_nonce *n,
- const struct aes_ccm_label *a, const void *b,
- size_t blen)
-{
- SHASH_DESC_ON_STACK(desc, tfm_cbcmac);
- u8 iv[AES_BLOCK_SIZE];
-
- /*
- * These checks should be compile time optimized out
- * ensure @a fills b1's mac_header and following fields
- */
- BUILD_BUG_ON(sizeof(*a) != sizeof(scratch->b1) - sizeof(scratch->b1.la));
- BUILD_BUG_ON(sizeof(scratch->b0) != sizeof(struct aes_ccm_block));
- BUILD_BUG_ON(sizeof(scratch->b1) != sizeof(struct aes_ccm_block));
- BUILD_BUG_ON(sizeof(scratch->ax) != sizeof(struct aes_ccm_block));
-
- /* Setup B0 */
- scratch->b0.flags = 0x59; /* Format B0 */
- scratch->b0.ccm_nonce = *n;
- scratch->b0.lm = cpu_to_be16(0); /* WUSB1.0[6.5] sez l(m) is 0 */
-
- /* Setup B1
- *
- * The WUSB spec is anything but clear! WUSB1.0[6.5]
- * says that to initialize B1 from A with 'l(a) = blen +
- * 14'--after clarification, it means to use A's contents
- * for MAC Header, EO, sec reserved and padding.
- */
- scratch->b1.la = cpu_to_be16(blen + 14);
- memcpy(&scratch->b1.mac_header, a, sizeof(*a));
-
- desc->tfm = tfm_cbcmac;
- crypto_shash_init(desc);
- crypto_shash_update(desc, (u8 *)&scratch->b0, sizeof(scratch->b0) +
- sizeof(scratch->b1));
- crypto_shash_finup(desc, b, blen, iv);
-
- /* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5]
- * The procedure is to AES crypt the A0 block and XOR the MIC
- * Tag against it; we only do the first 8 bytes and place it
- * directly in the destination buffer.
- */
- scratch->ax.flags = 0x01; /* as per WUSB 1.0 spec */
- scratch->ax.ccm_nonce = *n;
- scratch->ax.counter = 0;
-
- /* reuse the CBC-MAC transform to perform the single block encryption */
- crypto_shash_digest(desc, (u8 *)&scratch->ax, sizeof(scratch->ax),
- (u8 *)&scratch->ax);
-
- crypto_xor_cpy(mic, (u8 *)&scratch->ax, iv, 8);
-
- return 8;
-}
-
-/*
- * WUSB Pseudo Random Function (WUSB1.0[6.5])
- *
- * @b: buffer to the source data; cannot be a global or const local
- * (will confuse the scatterlists)
- */
-ssize_t wusb_prf(void *out, size_t out_size,
- const u8 key[16], const struct aes_ccm_nonce *_n,
- const struct aes_ccm_label *a,
- const void *b, size_t blen, size_t len)
-{
- ssize_t result, bytes = 0, bitr;
- struct aes_ccm_nonce n = *_n;
- struct crypto_shash *tfm_cbcmac;
- struct wusb_mac_scratch scratch;
- u64 sfn = 0;
- __le64 sfn_le;
-
- tfm_cbcmac = crypto_alloc_shash("cbcmac(aes)", 0, 0);
- if (IS_ERR(tfm_cbcmac)) {
- result = PTR_ERR(tfm_cbcmac);
- printk(KERN_ERR "E: can't load CBCMAC-AES: %d\n", (int)result);
- goto error_alloc_cbcmac;
- }
-
- result = crypto_shash_setkey(tfm_cbcmac, key, AES_BLOCK_SIZE);
- if (result < 0) {
- printk(KERN_ERR "E: can't set CBCMAC-AES key: %d\n", (int)result);
- goto error_setkey_cbcmac;
- }
-
- for (bitr = 0; bitr < (len + 63) / 64; bitr++) {
- sfn_le = cpu_to_le64(sfn++);
- memcpy(&n.sfn, &sfn_le, sizeof(n.sfn)); /* n.sfn++... */
- result = wusb_ccm_mac(tfm_cbcmac, &scratch, out + bytes,
- &n, a, b, blen);
- if (result < 0)
- goto error_ccm_mac;
- bytes += result;
- }
- result = bytes;
-
-error_ccm_mac:
-error_setkey_cbcmac:
- crypto_free_shash(tfm_cbcmac);
-error_alloc_cbcmac:
- return result;
-}
-
-/* WUSB1.0[A.2] test vectors */
-static const u8 stv_hsmic_key[16] = {
- 0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d,
- 0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f
-};
-
-static const struct aes_ccm_nonce stv_hsmic_n = {
- .sfn = { 0 },
- .tkid = { 0x76, 0x98, 0x01, },
- .dest_addr = { .data = { 0xbe, 0x00 } },
- .src_addr = { .data = { 0x76, 0x98 } },
-};
-
-/*
- * Out-of-band MIC Generation verification code
- *
- */
-static int wusb_oob_mic_verify(void)
-{
- int result;
- u8 mic[8];
- /* WUSB1.0[A.2] test vectors */
- static const struct usb_handshake stv_hsmic_hs = {
- .bMessageNumber = 2,
- .bStatus = 00,
- .tTKID = { 0x76, 0x98, 0x01 },
- .bReserved = 00,
- .CDID = { 0x30, 0x31, 0x32, 0x33, 0x34, 0x35,
- 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b,
- 0x3c, 0x3d, 0x3e, 0x3f },
- .nonce = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
- 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
- 0x2c, 0x2d, 0x2e, 0x2f },
- .MIC = { 0x75, 0x6a, 0x97, 0x51, 0x0c, 0x8c,
- 0x14, 0x7b },
- };
- size_t hs_size;
-
- result = wusb_oob_mic(mic, stv_hsmic_key, &stv_hsmic_n, &stv_hsmic_hs);
- if (result < 0)
- printk(KERN_ERR "E: WUSB OOB MIC test: failed: %d\n", result);
- else if (memcmp(stv_hsmic_hs.MIC, mic, sizeof(mic))) {
- printk(KERN_ERR "E: OOB MIC test: "
- "mismatch between MIC result and WUSB1.0[A2]\n");
- hs_size = sizeof(stv_hsmic_hs) - sizeof(stv_hsmic_hs.MIC);
- printk(KERN_ERR "E: Handshake2 in: (%zu bytes)\n", hs_size);
- wusb_key_dump(&stv_hsmic_hs, hs_size);
- printk(KERN_ERR "E: CCM Nonce in: (%zu bytes)\n",
- sizeof(stv_hsmic_n));
- wusb_key_dump(&stv_hsmic_n, sizeof(stv_hsmic_n));
- printk(KERN_ERR "E: MIC out:\n");
- wusb_key_dump(mic, sizeof(mic));
- printk(KERN_ERR "E: MIC out (from WUSB1.0[A.2]):\n");
- wusb_key_dump(stv_hsmic_hs.MIC, sizeof(stv_hsmic_hs.MIC));
- result = -EINVAL;
- } else
- result = 0;
- return result;
-}
-
-/*
- * Test vectors for Key derivation
- *
- * These come from WUSB1.0[6.5.1], the vectors in WUSB1.0[A.1]
- * (errata corrected in 2005/07).
- */
-static const u8 stv_key_a1[16] __attribute__ ((__aligned__(4))) = {
- 0xf0, 0xe1, 0xd2, 0xc3, 0xb4, 0xa5, 0x96, 0x87,
- 0x78, 0x69, 0x5a, 0x4b, 0x3c, 0x2d, 0x1e, 0x0f
-};
-
-static const struct aes_ccm_nonce stv_keydvt_n_a1 = {
- .sfn = { 0 },
- .tkid = { 0x76, 0x98, 0x01, },
- .dest_addr = { .data = { 0xbe, 0x00 } },
- .src_addr = { .data = { 0x76, 0x98 } },
-};
-
-static const struct wusb_keydvt_out stv_keydvt_out_a1 = {
- .kck = {
- 0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d,
- 0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f
- },
- .ptk = {
- 0xc8, 0x70, 0x62, 0x82, 0xb6, 0x7c, 0xe9, 0x06,
- 0x7b, 0xc5, 0x25, 0x69, 0xf2, 0x36, 0x61, 0x2d
- }
-};
-
-/*
- * Performa a test to make sure we match the vectors defined in
- * WUSB1.0[A.1](Errata2006/12)
- */
-static int wusb_key_derive_verify(void)
-{
- int result = 0;
- struct wusb_keydvt_out keydvt_out;
- /* These come from WUSB1.0[A.1] + 2006/12 errata */
- static const struct wusb_keydvt_in stv_keydvt_in_a1 = {
- .hnonce = {
- 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
- 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
- },
- .dnonce = {
- 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
- 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f
- }
- };
-
- result = wusb_key_derive(&keydvt_out, stv_key_a1, &stv_keydvt_n_a1,
- &stv_keydvt_in_a1);
- if (result < 0)
- printk(KERN_ERR "E: WUSB key derivation test: "
- "derivation failed: %d\n", result);
- if (memcmp(&stv_keydvt_out_a1, &keydvt_out, sizeof(keydvt_out))) {
- printk(KERN_ERR "E: WUSB key derivation test: "
- "mismatch between key derivation result "
- "and WUSB1.0[A1] Errata 2006/12\n");
- printk(KERN_ERR "E: keydvt in: key\n");
- wusb_key_dump(stv_key_a1, sizeof(stv_key_a1));
- printk(KERN_ERR "E: keydvt in: nonce\n");
- wusb_key_dump(&stv_keydvt_n_a1, sizeof(stv_keydvt_n_a1));
- printk(KERN_ERR "E: keydvt in: hnonce & dnonce\n");
- wusb_key_dump(&stv_keydvt_in_a1, sizeof(stv_keydvt_in_a1));
- printk(KERN_ERR "E: keydvt out: KCK\n");
- wusb_key_dump(&keydvt_out.kck, sizeof(keydvt_out.kck));
- printk(KERN_ERR "E: keydvt out: PTK\n");
- wusb_key_dump(&keydvt_out.ptk, sizeof(keydvt_out.ptk));
- result = -EINVAL;
- } else
- result = 0;
- return result;
-}
-
-/*
- * Initialize crypto system
- *
- * FIXME: we do nothing now, other than verifying. Later on we'll
- * cache the encryption stuff, so that's why we have a separate init.
- */
-int wusb_crypto_init(void)
-{
- int result;
-
- if (debug_crypto_verify) {
- result = wusb_key_derive_verify();
- if (result < 0)
- return result;
- return wusb_oob_mic_verify();
- }
- return 0;
-}
-
-void wusb_crypto_exit(void)
-{
- /* FIXME: free cached crypto transforms */
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * WUSB devices
- * sysfs bindings
- *
- * Copyright (C) 2007 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * Get them out of the way...
- */
-
-#include <linux/jiffies.h>
-#include <linux/ctype.h>
-#include <linux/workqueue.h>
-#include "wusbhc.h"
-
-static ssize_t wusb_disconnect_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct usb_device *usb_dev;
- struct wusbhc *wusbhc;
- unsigned command;
- u8 port_idx;
-
- if (sscanf(buf, "%u", &command) != 1)
- return -EINVAL;
- if (command == 0)
- return size;
- usb_dev = to_usb_device(dev);
- wusbhc = wusbhc_get_by_usb_dev(usb_dev);
- if (wusbhc == NULL)
- return -ENODEV;
-
- mutex_lock(&wusbhc->mutex);
- port_idx = wusb_port_no_to_idx(usb_dev->portnum);
- __wusbhc_dev_disable(wusbhc, port_idx);
- mutex_unlock(&wusbhc->mutex);
- wusbhc_put(wusbhc);
- return size;
-}
-static DEVICE_ATTR_WO(wusb_disconnect);
-
-static ssize_t wusb_cdid_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- ssize_t result;
- struct wusb_dev *wusb_dev;
-
- wusb_dev = wusb_dev_get_by_usb_dev(to_usb_device(dev));
- if (wusb_dev == NULL)
- return -ENODEV;
- result = sprintf(buf, "%16ph\n", wusb_dev->cdid.data);
- wusb_dev_put(wusb_dev);
- return result;
-}
-static DEVICE_ATTR_RO(wusb_cdid);
-
-static ssize_t wusb_ck_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- int result;
- struct usb_device *usb_dev;
- struct wusbhc *wusbhc;
- struct wusb_ckhdid ck;
-
- result = sscanf(buf,
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx\n",
- &ck.data[0] , &ck.data[1],
- &ck.data[2] , &ck.data[3],
- &ck.data[4] , &ck.data[5],
- &ck.data[6] , &ck.data[7],
- &ck.data[8] , &ck.data[9],
- &ck.data[10], &ck.data[11],
- &ck.data[12], &ck.data[13],
- &ck.data[14], &ck.data[15]);
- if (result != 16)
- return -EINVAL;
-
- usb_dev = to_usb_device(dev);
- wusbhc = wusbhc_get_by_usb_dev(usb_dev);
- if (wusbhc == NULL)
- return -ENODEV;
- result = wusb_dev_4way_handshake(wusbhc, usb_dev->wusb_dev, &ck);
- memzero_explicit(&ck, sizeof(ck));
- wusbhc_put(wusbhc);
- return result < 0 ? result : size;
-}
-static DEVICE_ATTR_WO(wusb_ck);
-
-static struct attribute *wusb_dev_attrs[] = {
- &dev_attr_wusb_disconnect.attr,
- &dev_attr_wusb_cdid.attr,
- &dev_attr_wusb_ck.attr,
- NULL,
-};
-
-static const struct attribute_group wusb_dev_attr_group = {
- .name = NULL, /* we want them in the same directory */
- .attrs = wusb_dev_attrs,
-};
-
-int wusb_dev_sysfs_add(struct wusbhc *wusbhc, struct usb_device *usb_dev,
- struct wusb_dev *wusb_dev)
-{
- int result = sysfs_create_group(&usb_dev->dev.kobj,
- &wusb_dev_attr_group);
- struct device *dev = &usb_dev->dev;
- if (result < 0)
- dev_err(dev, "Cannot register WUSB-dev attributes: %d\n",
- result);
- return result;
-}
-
-void wusb_dev_sysfs_rm(struct wusb_dev *wusb_dev)
-{
- struct usb_device *usb_dev = wusb_dev->usb_dev;
- if (usb_dev)
- sysfs_remove_group(&usb_dev->dev.kobj, &wusb_dev_attr_group);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
- * Device Connect handling
- *
- * Copyright (C) 2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- * FIXME: this file needs to be broken up, it's grown too big
- *
- *
- * WUSB1.0[7.1, 7.5.1, ]
- *
- * WUSB device connection is kind of messy. Some background:
- *
- * When a device wants to connect it scans the UWB radio channels
- * looking for a WUSB Channel; a WUSB channel is defined by MMCs
- * (Micro Managed Commands or something like that) [see
- * Design-overview for more on this] .
- *
- * So, device scans the radio, finds MMCs and thus a host and checks
- * when the next DNTS is. It sends a Device Notification Connect
- * (DN_Connect); the host picks it up (through nep.c and notif.c, ends
- * up in wusb_devconnect_ack(), which creates a wusb_dev structure in
- * wusbhc->port[port_number].wusb_dev), assigns an unauth address
- * to the device (this means from 0x80 to 0xfe) and sends, in the MMC
- * a Connect Ack Information Element (ConnAck IE).
- *
- * So now the device now has a WUSB address. From now on, we use
- * that to talk to it in the RPipes.
- *
- * ASSUMPTIONS:
- *
- * - We use the the as device address the port number where it is
- * connected (port 0 doesn't exist). For unauth, it is 128 + that.
- *
- * ROADMAP:
- *
- * This file contains the logic for doing that--entry points:
- *
- * wusb_devconnect_ack() Ack a device until _acked() called.
- * Called by notif.c:wusb_handle_dn_connect()
- * when a DN_Connect is received.
- *
- * wusb_devconnect_acked() Ack done, release resources.
- *
- * wusb_handle_dn_alive() Called by notif.c:wusb_handle_dn()
- * for processing a DN_Alive pong from a device.
- *
- * wusb_handle_dn_disconnect()Called by notif.c:wusb_handle_dn() to
- * process a disconnect request from a
- * device.
- *
- * __wusb_dev_disable() Called by rh.c:wusbhc_rh_clear_port_feat() when
- * disabling a port.
- *
- * wusb_devconnect_create() Called when creating the host by
- * lc.c:wusbhc_create().
- *
- * wusb_devconnect_destroy() Cleanup called removing the host. Called
- * by lc.c:wusbhc_destroy().
- *
- * Each Wireless USB host maintains a list of DN_Connect requests
- * (actually we maintain a list of pending Connect Acks, the
- * wusbhc->ca_list).
- *
- * LIFE CYCLE OF port->wusb_dev
- *
- * Before the @wusbhc structure put()s the reference it owns for
- * port->wusb_dev [and clean the wusb_dev pointer], it needs to
- * lock @wusbhc->mutex.
- */
-
-#include <linux/jiffies.h>
-#include <linux/ctype.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/export.h>
-#include "wusbhc.h"
-
-static void wusbhc_devconnect_acked_work(struct work_struct *work);
-
-static void wusb_dev_free(struct wusb_dev *wusb_dev)
-{
- kfree(wusb_dev);
-}
-
-static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc)
-{
- struct wusb_dev *wusb_dev;
-
- wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL);
- if (wusb_dev == NULL)
- goto err;
-
- wusb_dev->wusbhc = wusbhc;
-
- INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work);
-
- return wusb_dev;
-err:
- wusb_dev_free(wusb_dev);
- return NULL;
-}
-
-
-/*
- * Using the Connect-Ack list, fill out the @wusbhc Connect-Ack WUSB IE
- * properly so that it can be added to the MMC.
- *
- * We just get the @wusbhc->ca_list and fill out the first four ones or
- * less (per-spec WUSB1.0[7.5, before T7-38). If the ConnectAck WUSB
- * IE is not allocated, we alloc it.
- *
- * @wusbhc->mutex must be taken
- */
-static void wusbhc_fill_cack_ie(struct wusbhc *wusbhc)
-{
- unsigned cnt;
- struct wusb_dev *dev_itr;
- struct wuie_connect_ack *cack_ie;
-
- cack_ie = &wusbhc->cack_ie;
- cnt = 0;
- list_for_each_entry(dev_itr, &wusbhc->cack_list, cack_node) {
- cack_ie->blk[cnt].CDID = dev_itr->cdid;
- cack_ie->blk[cnt].bDeviceAddress = dev_itr->addr;
- if (++cnt >= WUIE_ELT_MAX)
- break;
- }
- cack_ie->hdr.bLength = sizeof(cack_ie->hdr)
- + cnt * sizeof(cack_ie->blk[0]);
-}
-
-/*
- * Register a new device that wants to connect
- *
- * A new device wants to connect, so we add it to the Connect-Ack
- * list. We give it an address in the unauthorized range (bit 8 set);
- * user space will have to drive authorization further on.
- *
- * @dev_addr: address to use for the device (which is also the port
- * number).
- *
- * @wusbhc->mutex must be taken
- */
-static struct wusb_dev *wusbhc_cack_add(struct wusbhc *wusbhc,
- struct wusb_dn_connect *dnc,
- const char *pr_cdid, u8 port_idx)
-{
- struct device *dev = wusbhc->dev;
- struct wusb_dev *wusb_dev;
- int new_connection = wusb_dn_connect_new_connection(dnc);
- u8 dev_addr;
- int result;
-
- /* Is it registered already? */
- list_for_each_entry(wusb_dev, &wusbhc->cack_list, cack_node)
- if (!memcmp(&wusb_dev->cdid, &dnc->CDID,
- sizeof(wusb_dev->cdid)))
- return wusb_dev;
- /* We don't have it, create an entry, register it */
- wusb_dev = wusb_dev_alloc(wusbhc);
- if (wusb_dev == NULL)
- return NULL;
- wusb_dev_init(wusb_dev);
- wusb_dev->cdid = dnc->CDID;
- wusb_dev->port_idx = port_idx;
-
- /*
- * Devices are always available within the cluster reservation
- * and since the hardware will take the intersection of the
- * per-device availability and the cluster reservation, the
- * per-device availability can simply be set to always
- * available.
- */
- bitmap_fill(wusb_dev->availability.bm, UWB_NUM_MAS);
-
- /* FIXME: handle reconnects instead of assuming connects are
- always new. */
- if (1 && new_connection == 0)
- new_connection = 1;
- if (new_connection) {
- dev_addr = (port_idx + 2) | WUSB_DEV_ADDR_UNAUTH;
-
- dev_info(dev, "Connecting new WUSB device to address %u, "
- "port %u\n", dev_addr, port_idx);
-
- result = wusb_set_dev_addr(wusbhc, wusb_dev, dev_addr);
- if (result < 0)
- return NULL;
- }
- wusb_dev->entry_ts = jiffies;
- list_add_tail(&wusb_dev->cack_node, &wusbhc->cack_list);
- wusbhc->cack_count++;
- wusbhc_fill_cack_ie(wusbhc);
-
- return wusb_dev;
-}
-
-/*
- * Remove a Connect-Ack context entry from the HCs view
- *
- * @wusbhc->mutex must be taken
- */
-static void wusbhc_cack_rm(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
-{
- list_del_init(&wusb_dev->cack_node);
- wusbhc->cack_count--;
- wusbhc_fill_cack_ie(wusbhc);
-}
-
-/*
- * @wusbhc->mutex must be taken */
-static
-void wusbhc_devconnect_acked(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
-{
- wusbhc_cack_rm(wusbhc, wusb_dev);
- if (wusbhc->cack_count)
- wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr);
- else
- wusbhc_mmcie_rm(wusbhc, &wusbhc->cack_ie.hdr);
-}
-
-static void wusbhc_devconnect_acked_work(struct work_struct *work)
-{
- struct wusb_dev *wusb_dev = container_of(work, struct wusb_dev,
- devconnect_acked_work);
- struct wusbhc *wusbhc = wusb_dev->wusbhc;
-
- mutex_lock(&wusbhc->mutex);
- wusbhc_devconnect_acked(wusbhc, wusb_dev);
- mutex_unlock(&wusbhc->mutex);
-
- wusb_dev_put(wusb_dev);
-}
-
-/*
- * Ack a device for connection
- *
- * FIXME: docs
- *
- * @pr_cdid: Printable CDID...hex Use @dnc->cdid for the real deal.
- *
- * So we get the connect ack IE (may have been allocated already),
- * find an empty connect block, an empty virtual port, create an
- * address with it (see below), make it an unauth addr [bit 7 set] and
- * set the MMC.
- *
- * Addresses: because WUSB hosts have no downstream hubs, we can do a
- * 1:1 mapping between 'port number' and device
- * address. This simplifies many things, as during this
- * initial connect phase the USB stack has no knowledge of
- * the device and hasn't assigned an address yet--we know
- * USB's choose_address() will use the same heuristics we
- * use here, so we can assume which address will be assigned.
- *
- * USB stack always assigns address 1 to the root hub, so
- * to the port number we add 2 (thus virtual port #0 is
- * addr #2).
- *
- * @wusbhc shall be referenced
- */
-static
-void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc,
- const char *pr_cdid)
-{
- int result;
- struct device *dev = wusbhc->dev;
- struct wusb_dev *wusb_dev;
- struct wusb_port *port;
- unsigned idx;
-
- mutex_lock(&wusbhc->mutex);
-
- /* Check we are not handling it already */
- for (idx = 0; idx < wusbhc->ports_max; idx++) {
- port = wusb_port_by_idx(wusbhc, idx);
- if (port->wusb_dev
- && memcmp(&dnc->CDID, &port->wusb_dev->cdid, sizeof(dnc->CDID)) == 0)
- goto error_unlock;
- }
- /* Look up those fake ports we have for a free one */
- for (idx = 0; idx < wusbhc->ports_max; idx++) {
- port = wusb_port_by_idx(wusbhc, idx);
- if ((port->status & USB_PORT_STAT_POWER)
- && !(port->status & USB_PORT_STAT_CONNECTION))
- break;
- }
- if (idx >= wusbhc->ports_max) {
- dev_err(dev, "Host controller can't connect more devices "
- "(%u already connected); device %s rejected\n",
- wusbhc->ports_max, pr_cdid);
- /* NOTE: we could send a WUIE_Disconnect here, but we haven't
- * event acked, so the device will eventually timeout the
- * connection, right? */
- goto error_unlock;
- }
-
- /* Make sure we are using no crypto on that "virtual port" */
- wusbhc->set_ptk(wusbhc, idx, 0, NULL, 0);
-
- /* Grab a filled in Connect-Ack context, fill out the
- * Connect-Ack Wireless USB IE, set the MMC */
- wusb_dev = wusbhc_cack_add(wusbhc, dnc, pr_cdid, idx);
- if (wusb_dev == NULL)
- goto error_unlock;
- result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr);
- if (result < 0)
- goto error_unlock;
- /* Give the device at least 2ms (WUSB1.0[7.5.1p3]), let's do
- * three for a good measure */
- msleep(3);
- port->wusb_dev = wusb_dev;
- port->status |= USB_PORT_STAT_CONNECTION;
- port->change |= USB_PORT_STAT_C_CONNECTION;
- /* Now the port status changed to connected; hub_wq will
- * pick the change up and try to reset the port to bring it to
- * the enabled state--so this process returns up to the stack
- * and it calls back into wusbhc_rh_port_reset().
- */
-error_unlock:
- mutex_unlock(&wusbhc->mutex);
- return;
-
-}
-
-/*
- * Disconnect a Wireless USB device from its fake port
- *
- * Marks the port as disconnected so that hub_wq can pick up the change
- * and drops our knowledge about the device.
- *
- * Assumes there is a device connected
- *
- * @port_index: zero based port number
- *
- * NOTE: @wusbhc->mutex is locked
- *
- * WARNING: From here it is not very safe to access anything hanging off
- * wusb_dev
- */
-static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
- struct wusb_port *port)
-{
- struct wusb_dev *wusb_dev = port->wusb_dev;
-
- port->status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE
- | USB_PORT_STAT_SUSPEND | USB_PORT_STAT_RESET
- | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED);
- port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE;
- if (wusb_dev) {
- dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx);
- if (!list_empty(&wusb_dev->cack_node))
- list_del_init(&wusb_dev->cack_node);
- /* For the one in cack_add() */
- wusb_dev_put(wusb_dev);
- }
- port->wusb_dev = NULL;
-
- /* After a device disconnects, change the GTK (see [WUSB]
- * section 6.2.11.2). */
- if (wusbhc->active)
- wusbhc_gtk_rekey(wusbhc);
-
- /* The Wireless USB part has forgotten about the device already; now
- * hub_wq's timer will pick up the disconnection and remove the USB
- * device from the system
- */
-}
-
-/*
- * Refresh the list of keep alives to emit in the MMC
- *
- * We only publish the first four devices that have a coming timeout
- * condition. Then when we are done processing those, we go for the
- * next ones. We ignore the ones that have timed out already (they'll
- * be purged).
- *
- * This might cause the first devices to timeout the last devices in
- * the port array...FIXME: come up with a better algorithm?
- *
- * Note we can't do much about MMC's ops errors; we hope next refresh
- * will kind of handle it.
- *
- * NOTE: @wusbhc->mutex is locked
- */
-static void __wusbhc_keep_alive(struct wusbhc *wusbhc)
-{
- struct device *dev = wusbhc->dev;
- unsigned cnt;
- struct wusb_dev *wusb_dev;
- struct wusb_port *wusb_port;
- struct wuie_keep_alive *ie = &wusbhc->keep_alive_ie;
- unsigned keep_alives, old_keep_alives;
-
- old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr);
- keep_alives = 0;
- for (cnt = 0;
- keep_alives < WUIE_ELT_MAX && cnt < wusbhc->ports_max;
- cnt++) {
- unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout);
-
- wusb_port = wusb_port_by_idx(wusbhc, cnt);
- wusb_dev = wusb_port->wusb_dev;
-
- if (wusb_dev == NULL)
- continue;
- if (wusb_dev->usb_dev == NULL)
- continue;
-
- if (time_after(jiffies, wusb_dev->entry_ts + tt)) {
- dev_err(dev, "KEEPALIVE: device %u timed out\n",
- wusb_dev->addr);
- __wusbhc_dev_disconnect(wusbhc, wusb_port);
- } else if (time_after(jiffies, wusb_dev->entry_ts + tt/3)) {
- /* Approaching timeout cut off, need to refresh */
- ie->bDeviceAddress[keep_alives++] = wusb_dev->addr;
- }
- }
- if (keep_alives & 0x1) /* pad to even number ([WUSB] section 7.5.9) */
- ie->bDeviceAddress[keep_alives++] = 0x7f;
- ie->hdr.bLength = sizeof(ie->hdr) +
- keep_alives*sizeof(ie->bDeviceAddress[0]);
- if (keep_alives > 0)
- wusbhc_mmcie_set(wusbhc, 10, 5, &ie->hdr);
- else if (old_keep_alives != 0)
- wusbhc_mmcie_rm(wusbhc, &ie->hdr);
-}
-
-/*
- * Do a run through all devices checking for timeouts
- */
-static void wusbhc_keep_alive_run(struct work_struct *ws)
-{
- struct delayed_work *dw = to_delayed_work(ws);
- struct wusbhc *wusbhc = container_of(dw, struct wusbhc, keep_alive_timer);
-
- mutex_lock(&wusbhc->mutex);
- __wusbhc_keep_alive(wusbhc);
- mutex_unlock(&wusbhc->mutex);
-
- queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
- msecs_to_jiffies(wusbhc->trust_timeout / 2));
-}
-
-/*
- * Find the wusb_dev from its device address.
- *
- * The device can be found directly from the address (see
- * wusb_cack_add() for where the device address is set to port_idx
- * +2), except when the address is zero.
- */
-static struct wusb_dev *wusbhc_find_dev_by_addr(struct wusbhc *wusbhc, u8 addr)
-{
- int p;
-
- if (addr == 0xff) /* unconnected */
- return NULL;
-
- if (addr > 0) {
- int port = (addr & ~0x80) - 2;
- if (port < 0 || port >= wusbhc->ports_max)
- return NULL;
- return wusb_port_by_idx(wusbhc, port)->wusb_dev;
- }
-
- /* Look for the device with address 0. */
- for (p = 0; p < wusbhc->ports_max; p++) {
- struct wusb_dev *wusb_dev = wusb_port_by_idx(wusbhc, p)->wusb_dev;
- if (wusb_dev && wusb_dev->addr == addr)
- return wusb_dev;
- }
- return NULL;
-}
-
-/*
- * Handle a DN_Alive notification (WUSB1.0[7.6.1])
- *
- * This just updates the device activity timestamp and then refreshes
- * the keep alive IE.
- *
- * @wusbhc shall be referenced and unlocked
- */
-static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, u8 srcaddr)
-{
- struct wusb_dev *wusb_dev;
-
- mutex_lock(&wusbhc->mutex);
- wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
- if (wusb_dev == NULL) {
- dev_dbg(wusbhc->dev, "ignoring DN_Alive from unconnected device %02x\n",
- srcaddr);
- } else {
- wusb_dev->entry_ts = jiffies;
- __wusbhc_keep_alive(wusbhc);
- }
- mutex_unlock(&wusbhc->mutex);
-}
-
-/*
- * Handle a DN_Connect notification (WUSB1.0[7.6.1])
- *
- * @wusbhc
- * @pkt_hdr
- * @size: Size of the buffer where the notification resides; if the
- * notification data suggests there should be more data than
- * available, an error will be signaled and the whole buffer
- * consumed.
- *
- * @wusbhc->mutex shall be held
- */
-static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc,
- struct wusb_dn_hdr *dn_hdr,
- size_t size)
-{
- struct device *dev = wusbhc->dev;
- struct wusb_dn_connect *dnc;
- char pr_cdid[WUSB_CKHDID_STRSIZE];
- static const char *beacon_behaviour[] = {
- "reserved",
- "self-beacon",
- "directed-beacon",
- "no-beacon"
- };
-
- if (size < sizeof(*dnc)) {
- dev_err(dev, "DN CONNECT: short notification (%zu < %zu)\n",
- size, sizeof(*dnc));
- return;
- }
-
- dnc = container_of(dn_hdr, struct wusb_dn_connect, hdr);
- sprintf(pr_cdid, "%16ph", dnc->CDID.data);
- dev_info(dev, "DN CONNECT: device %s @ %x (%s) wants to %s\n",
- pr_cdid,
- wusb_dn_connect_prev_dev_addr(dnc),
- beacon_behaviour[wusb_dn_connect_beacon_behavior(dnc)],
- wusb_dn_connect_new_connection(dnc) ? "connect" : "reconnect");
- /* ACK the connect */
- wusbhc_devconnect_ack(wusbhc, dnc, pr_cdid);
-}
-
-/*
- * Handle a DN_Disconnect notification (WUSB1.0[7.6.1])
- *
- * Device is going down -- do the disconnect.
- *
- * @wusbhc shall be referenced and unlocked
- */
-static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, u8 srcaddr)
-{
- struct device *dev = wusbhc->dev;
- struct wusb_dev *wusb_dev;
-
- mutex_lock(&wusbhc->mutex);
- wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
- if (wusb_dev == NULL) {
- dev_dbg(dev, "ignoring DN DISCONNECT from unconnected device %02x\n",
- srcaddr);
- } else {
- dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n",
- wusb_dev->addr);
- __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc,
- wusb_dev->port_idx));
- }
- mutex_unlock(&wusbhc->mutex);
-}
-
-/*
- * Handle a Device Notification coming a host
- *
- * The Device Notification comes from a host (HWA, DWA or WHCI)
- * wrapped in a set of headers. Somebody else has peeled off those
- * headers for us and we just get one Device Notifications.
- *
- * Invalid DNs (e.g., too short) are discarded.
- *
- * @wusbhc shall be referenced
- *
- * FIXMES:
- * - implement priorities as in WUSB1.0[Table 7-55]?
- */
-void wusbhc_handle_dn(struct wusbhc *wusbhc, u8 srcaddr,
- struct wusb_dn_hdr *dn_hdr, size_t size)
-{
- struct device *dev = wusbhc->dev;
-
- if (size < sizeof(struct wusb_dn_hdr)) {
- dev_err(dev, "DN data shorter than DN header (%d < %d)\n",
- (int)size, (int)sizeof(struct wusb_dn_hdr));
- return;
- }
- switch (dn_hdr->bType) {
- case WUSB_DN_CONNECT:
- wusbhc_handle_dn_connect(wusbhc, dn_hdr, size);
- break;
- case WUSB_DN_ALIVE:
- wusbhc_handle_dn_alive(wusbhc, srcaddr);
- break;
- case WUSB_DN_DISCONNECT:
- wusbhc_handle_dn_disconnect(wusbhc, srcaddr);
- break;
- case WUSB_DN_MASAVAILCHANGED:
- case WUSB_DN_RWAKE:
- case WUSB_DN_SLEEP:
- /* FIXME: handle these DNs. */
- break;
- case WUSB_DN_EPRDY:
- /* The hardware handles these. */
- break;
- default:
- dev_warn(dev, "unknown DN %u (%d octets) from %u\n",
- dn_hdr->bType, (int)size, srcaddr);
- }
-}
-EXPORT_SYMBOL_GPL(wusbhc_handle_dn);
-
-/*
- * Disconnect a WUSB device from a the cluster
- *
- * @wusbhc
- * @port Fake port where the device is (wusbhc index, not USB port number).
- *
- * In Wireless USB, a disconnect is basically telling the device he is
- * being disconnected and forgetting about him.
- *
- * We send the device a Device Disconnect IE (WUSB1.0[7.5.11]) for 100
- * ms and then keep going.
- *
- * We don't do much in case of error; we always pretend we disabled
- * the port and disconnected the device. If physically the request
- * didn't get there (many things can fail in the way there), the stack
- * will reject the device's communication attempts.
- *
- * @wusbhc should be refcounted and locked
- */
-void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port_idx)
-{
- int result;
- struct device *dev = wusbhc->dev;
- struct wusb_dev *wusb_dev;
- struct wuie_disconnect *ie;
-
- wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
- if (wusb_dev == NULL) {
- /* reset no device? ignore */
- dev_dbg(dev, "DISCONNECT: no device at port %u, ignoring\n",
- port_idx);
- return;
- }
- __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
-
- ie = kzalloc(sizeof(*ie), GFP_KERNEL);
- if (ie == NULL)
- return;
- ie->hdr.bLength = sizeof(*ie);
- ie->hdr.bIEIdentifier = WUIE_ID_DEVICE_DISCONNECT;
- ie->bDeviceAddress = wusb_dev->addr;
- result = wusbhc_mmcie_set(wusbhc, 0, 0, &ie->hdr);
- if (result < 0)
- dev_err(dev, "DISCONNECT: can't set MMC: %d\n", result);
- else {
- /* At least 6 MMCs, assuming at least 1 MMC per zone. */
- msleep(7*4);
- wusbhc_mmcie_rm(wusbhc, &ie->hdr);
- }
- kfree(ie);
-}
-
-/*
- * Walk over the BOS descriptor, verify and grok it
- *
- * @usb_dev: referenced
- * @wusb_dev: referenced and unlocked
- *
- * The BOS descriptor is defined at WUSB1.0[7.4.1], and it defines a
- * "flexible" way to wrap all kinds of descriptors inside an standard
- * descriptor (wonder why they didn't use normal descriptors,
- * btw). Not like they lack code.
- *
- * At the end we go to look for the WUSB Device Capabilities
- * (WUSB1.0[7.4.1.1]) that is wrapped in a device capability descriptor
- * that is part of the BOS descriptor set. That tells us what does the
- * device support (dual role, beacon type, UWB PHY rates).
- */
-static int wusb_dev_bos_grok(struct usb_device *usb_dev,
- struct wusb_dev *wusb_dev,
- struct usb_bos_descriptor *bos, size_t desc_size)
-{
- ssize_t result;
- struct device *dev = &usb_dev->dev;
- void *itr, *top;
-
- /* Walk over BOS capabilities, verify them */
- itr = (void *)bos + sizeof(*bos);
- top = itr + desc_size - sizeof(*bos);
- while (itr < top) {
- struct usb_dev_cap_header *cap_hdr = itr;
- size_t cap_size;
- u8 cap_type;
- if (top - itr < sizeof(*cap_hdr)) {
- dev_err(dev, "Device BUG? premature end of BOS header "
- "data [offset 0x%02x]: only %zu bytes left\n",
- (int)(itr - (void *)bos), top - itr);
- result = -ENOSPC;
- goto error_bad_cap;
- }
- cap_size = cap_hdr->bLength;
- cap_type = cap_hdr->bDevCapabilityType;
- if (cap_size == 0)
- break;
- if (cap_size > top - itr) {
- dev_err(dev, "Device BUG? premature end of BOS data "
- "[offset 0x%02x cap %02x %zu bytes]: "
- "only %zu bytes left\n",
- (int)(itr - (void *)bos),
- cap_type, cap_size, top - itr);
- result = -EBADF;
- goto error_bad_cap;
- }
- switch (cap_type) {
- case USB_CAP_TYPE_WIRELESS_USB:
- if (cap_size != sizeof(*wusb_dev->wusb_cap_descr))
- dev_err(dev, "Device BUG? WUSB Capability "
- "descriptor is %zu bytes vs %zu "
- "needed\n", cap_size,
- sizeof(*wusb_dev->wusb_cap_descr));
- else
- wusb_dev->wusb_cap_descr = itr;
- break;
- default:
- dev_err(dev, "BUG? Unknown BOS capability 0x%02x "
- "(%zu bytes) at offset 0x%02x\n", cap_type,
- cap_size, (int)(itr - (void *)bos));
- }
- itr += cap_size;
- }
- result = 0;
-error_bad_cap:
- return result;
-}
-
-/*
- * Add information from the BOS descriptors to the device
- *
- * @usb_dev: referenced
- * @wusb_dev: referenced and unlocked
- *
- * So what we do is we alloc a space for the BOS descriptor of 64
- * bytes; read the first four bytes which include the wTotalLength
- * field (WUSB1.0[T7-26]) and if it fits in those 64 bytes, read the
- * whole thing. If not we realloc to that size.
- *
- * Then we call the groking function, that will fill up
- * wusb_dev->wusb_cap_descr, which is what we'll need later on.
- */
-static int wusb_dev_bos_add(struct usb_device *usb_dev,
- struct wusb_dev *wusb_dev)
-{
- ssize_t result;
- struct device *dev = &usb_dev->dev;
- struct usb_bos_descriptor *bos;
- size_t alloc_size = 32, desc_size = 4;
-
- bos = kmalloc(alloc_size, GFP_KERNEL);
- if (bos == NULL)
- return -ENOMEM;
- result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size);
- if (result < 4) {
- dev_err(dev, "Can't get BOS descriptor or too short: %zd\n",
- result);
- goto error_get_descriptor;
- }
- desc_size = le16_to_cpu(bos->wTotalLength);
- if (desc_size >= alloc_size) {
- kfree(bos);
- alloc_size = desc_size;
- bos = kmalloc(alloc_size, GFP_KERNEL);
- if (bos == NULL)
- return -ENOMEM;
- }
- result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size);
- if (result < 0 || result != desc_size) {
- dev_err(dev, "Can't get BOS descriptor or too short (need "
- "%zu bytes): %zd\n", desc_size, result);
- goto error_get_descriptor;
- }
- if (result < sizeof(*bos)
- || le16_to_cpu(bos->wTotalLength) != desc_size) {
- dev_err(dev, "Can't get BOS descriptor or too short (need "
- "%zu bytes): %zd\n", desc_size, result);
- goto error_get_descriptor;
- }
-
- result = wusb_dev_bos_grok(usb_dev, wusb_dev, bos, result);
- if (result < 0)
- goto error_bad_bos;
- wusb_dev->bos = bos;
- return 0;
-
-error_bad_bos:
-error_get_descriptor:
- kfree(bos);
- wusb_dev->wusb_cap_descr = NULL;
- return result;
-}
-
-static void wusb_dev_bos_rm(struct wusb_dev *wusb_dev)
-{
- kfree(wusb_dev->bos);
- wusb_dev->wusb_cap_descr = NULL;
-};
-
-/*
- * USB stack's device addition Notifier Callback
- *
- * Called from drivers/usb/core/hub.c when a new device is added; we
- * use this hook to perform certain WUSB specific setup work on the
- * new device. As well, it is the first time we can connect the
- * wusb_dev and the usb_dev. So we note it down in wusb_dev and take a
- * reference that we'll drop.
- *
- * First we need to determine if the device is a WUSB device (else we
- * ignore it). For that we use the speed setting (USB_SPEED_WIRELESS)
- * [FIXME: maybe we'd need something more definitive]. If so, we track
- * it's usb_busd and from there, the WUSB HC.
- *
- * Because all WUSB HCs are contained in a 'struct wusbhc', voila, we
- * get the wusbhc for the device.
- *
- * We have a reference on @usb_dev (as we are called at the end of its
- * enumeration).
- *
- * NOTE: @usb_dev locked
- */
-static void wusb_dev_add_ncb(struct usb_device *usb_dev)
-{
- int result = 0;
- struct wusb_dev *wusb_dev;
- struct wusbhc *wusbhc;
- struct device *dev = &usb_dev->dev;
- u8 port_idx;
-
- if (usb_dev->wusb == 0 || usb_dev->devnum == 1)
- return; /* skip non wusb and wusb RHs */
-
- usb_set_device_state(usb_dev, USB_STATE_UNAUTHENTICATED);
-
- wusbhc = wusbhc_get_by_usb_dev(usb_dev);
- if (wusbhc == NULL)
- goto error_nodev;
- mutex_lock(&wusbhc->mutex);
- wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev);
- port_idx = wusb_port_no_to_idx(usb_dev->portnum);
- mutex_unlock(&wusbhc->mutex);
- if (wusb_dev == NULL)
- goto error_nodev;
- wusb_dev->usb_dev = usb_get_dev(usb_dev);
- usb_dev->wusb_dev = wusb_dev_get(wusb_dev);
- result = wusb_dev_sec_add(wusbhc, usb_dev, wusb_dev);
- if (result < 0) {
- dev_err(dev, "Cannot enable security: %d\n", result);
- goto error_sec_add;
- }
- /* Now query the device for it's BOS and attach it to wusb_dev */
- result = wusb_dev_bos_add(usb_dev, wusb_dev);
- if (result < 0) {
- dev_err(dev, "Cannot get BOS descriptors: %d\n", result);
- goto error_bos_add;
- }
- result = wusb_dev_sysfs_add(wusbhc, usb_dev, wusb_dev);
- if (result < 0)
- goto error_add_sysfs;
-out:
- wusb_dev_put(wusb_dev);
- wusbhc_put(wusbhc);
-error_nodev:
- return;
-
-error_add_sysfs:
- wusb_dev_bos_rm(wusb_dev);
-error_bos_add:
- wusb_dev_sec_rm(wusb_dev);
-error_sec_add:
- mutex_lock(&wusbhc->mutex);
- __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
- mutex_unlock(&wusbhc->mutex);
- goto out;
-}
-
-/*
- * Undo all the steps done at connection by the notifier callback
- *
- * NOTE: @usb_dev locked
- */
-static void wusb_dev_rm_ncb(struct usb_device *usb_dev)
-{
- struct wusb_dev *wusb_dev = usb_dev->wusb_dev;
-
- if (usb_dev->wusb == 0 || usb_dev->devnum == 1)
- return; /* skip non wusb and wusb RHs */
-
- wusb_dev_sysfs_rm(wusb_dev);
- wusb_dev_bos_rm(wusb_dev);
- wusb_dev_sec_rm(wusb_dev);
- wusb_dev->usb_dev = NULL;
- usb_dev->wusb_dev = NULL;
- wusb_dev_put(wusb_dev);
- usb_put_dev(usb_dev);
-}
-
-/*
- * Handle notifications from the USB stack (notifier call back)
- *
- * This is called when the USB stack does a
- * usb_{bus,device}_{add,remove}() so we can do WUSB specific
- * handling. It is called with [for the case of
- * USB_DEVICE_{ADD,REMOVE} with the usb_dev locked.
- */
-int wusb_usb_ncb(struct notifier_block *nb, unsigned long val,
- void *priv)
-{
- int result = NOTIFY_OK;
-
- switch (val) {
- case USB_DEVICE_ADD:
- wusb_dev_add_ncb(priv);
- break;
- case USB_DEVICE_REMOVE:
- wusb_dev_rm_ncb(priv);
- break;
- case USB_BUS_ADD:
- /* ignore (for now) */
- case USB_BUS_REMOVE:
- break;
- default:
- WARN_ON(1);
- result = NOTIFY_BAD;
- }
- return result;
-}
-
-/*
- * Return a referenced wusb_dev given a @wusbhc and @usb_dev
- */
-struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *wusbhc,
- struct usb_device *usb_dev)
-{
- struct wusb_dev *wusb_dev;
- u8 port_idx;
-
- port_idx = wusb_port_no_to_idx(usb_dev->portnum);
- BUG_ON(port_idx > wusbhc->ports_max);
- wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
- if (wusb_dev != NULL) /* ops, device is gone */
- wusb_dev_get(wusb_dev);
- return wusb_dev;
-}
-EXPORT_SYMBOL_GPL(__wusb_dev_get_by_usb_dev);
-
-void wusb_dev_destroy(struct kref *_wusb_dev)
-{
- struct wusb_dev *wusb_dev = container_of(_wusb_dev, struct wusb_dev, refcnt);
-
- list_del_init(&wusb_dev->cack_node);
- wusb_dev_free(wusb_dev);
-}
-EXPORT_SYMBOL_GPL(wusb_dev_destroy);
-
-/*
- * Create all the device connect handling infrastructure
- *
- * This is basically the device info array, Connect Acknowledgement
- * (cack) lists, keep-alive timers (and delayed work thread).
- */
-int wusbhc_devconnect_create(struct wusbhc *wusbhc)
-{
- wusbhc->keep_alive_ie.hdr.bIEIdentifier = WUIE_ID_KEEP_ALIVE;
- wusbhc->keep_alive_ie.hdr.bLength = sizeof(wusbhc->keep_alive_ie.hdr);
- INIT_DELAYED_WORK(&wusbhc->keep_alive_timer, wusbhc_keep_alive_run);
-
- wusbhc->cack_ie.hdr.bIEIdentifier = WUIE_ID_CONNECTACK;
- wusbhc->cack_ie.hdr.bLength = sizeof(wusbhc->cack_ie.hdr);
- INIT_LIST_HEAD(&wusbhc->cack_list);
-
- return 0;
-}
-
-/*
- * Release all resources taken by the devconnect stuff
- */
-void wusbhc_devconnect_destroy(struct wusbhc *wusbhc)
-{
- /* no op */
-}
-
-/*
- * wusbhc_devconnect_start - start accepting device connections
- * @wusbhc: the WUSB HC
- *
- * Sets the Host Info IE to accept all new connections.
- *
- * FIXME: This also enables the keep alives but this is not necessary
- * until there are connected and authenticated devices.
- */
-int wusbhc_devconnect_start(struct wusbhc *wusbhc)
-{
- struct device *dev = wusbhc->dev;
- struct wuie_host_info *hi;
- int result;
-
- hi = kzalloc(sizeof(*hi), GFP_KERNEL);
- if (hi == NULL)
- return -ENOMEM;
-
- hi->hdr.bLength = sizeof(*hi);
- hi->hdr.bIEIdentifier = WUIE_ID_HOST_INFO;
- hi->attributes = cpu_to_le16((wusbhc->rsv->stream << 3) | WUIE_HI_CAP_ALL);
- hi->CHID = wusbhc->chid;
- result = wusbhc_mmcie_set(wusbhc, 0, 0, &hi->hdr);
- if (result < 0) {
- dev_err(dev, "Cannot add Host Info MMCIE: %d\n", result);
- goto error_mmcie_set;
- }
- wusbhc->wuie_host_info = hi;
-
- queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
- msecs_to_jiffies(wusbhc->trust_timeout / 2));
-
- return 0;
-
-error_mmcie_set:
- kfree(hi);
- return result;
-}
-
-/*
- * wusbhc_devconnect_stop - stop managing connected devices
- * @wusbhc: the WUSB HC
- *
- * Disconnects any devices still connected, stops the keep alives and
- * removes the Host Info IE.
- */
-void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
-{
- int i;
-
- mutex_lock(&wusbhc->mutex);
- for (i = 0; i < wusbhc->ports_max; i++) {
- if (wusbhc->port[i].wusb_dev)
- __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]);
- }
- mutex_unlock(&wusbhc->mutex);
-
- cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
- wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
- kfree(wusbhc->wuie_host_info);
- wusbhc->wuie_host_info = NULL;
-}
-
-/*
- * wusb_set_dev_addr - set the WUSB device address used by the host
- * @wusbhc: the WUSB HC the device is connect to
- * @wusb_dev: the WUSB device
- * @addr: new device address
- */
-int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, u8 addr)
-{
- int result;
-
- wusb_dev->addr = addr;
- result = wusbhc->dev_info_set(wusbhc, wusb_dev);
- if (result < 0)
- dev_err(wusbhc->dev, "device %d: failed to set device "
- "address\n", wusb_dev->port_idx);
- else
- dev_info(wusbhc->dev, "device %d: %s addr %u\n",
- wusb_dev->port_idx,
- (addr & WUSB_DEV_ADDR_UNAUTH) ? "unauth" : "auth",
- wusb_dev->addr);
-
- return result;
-}
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-
-config USB_WHCI_HCD
- tristate "Wireless USB Host Controller Interface (WHCI) driver"
- depends on USB_PCI && USB && UWB
- select USB_WUSB
- select UWB_WHCI
- help
- A driver for PCI-based Wireless USB Host Controllers that are
- compliant with the WHCI specification.
-
- To compile this driver a module, choose M here: the module
- will be called "whci-hcd".
-
-config USB_HWA_HCD
- tristate "Host Wire Adapter (HWA) driver"
- depends on USB && UWB
- select USB_WUSB
- select UWB_HWA
- help
- This driver enables you to connect Wireless USB devices to
- your system using a Host Wire Adaptor USB dongle. This is an
- UWB Radio Controller and WUSB Host Controller connected to
- your machine via USB (specified in WUSB1.0).
-
- To compile this driver a module, choose M here: the module
- will be called "hwa-hc".
-
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_USB_WHCI_HCD) += whci/
-obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Host Wire Adapter:
- * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * The HWA driver is a simple layer that forwards requests to the WAHC
- * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host
- * Controller) layers.
- *
- * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB
- * Host Controller that is connected to your system via USB (a USB
- * dongle that implements a USB host...). There is also a Device Wired
- * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for
- * transferring data (it is after all a USB host connected via
- * Wireless USB), we have a common layer called Wire Adapter Host
- * Controller that does all the hard work. The WUSBHC (Wireless USB
- * Host Controller) is the part common to WUSB Host Controllers, the
- * HWA and the PCI-based one, that is implemented following the WHCI
- * spec. All these layers are implemented in ../wusbcore.
- *
- * The main functions are hwahc_op_urb_{en,de}queue(), that pass the
- * job of converting a URB to a Wire Adapter
- *
- * Entry points:
- *
- * hwahc_driver_*() Driver initialization, registration and
- * teardown.
- *
- * hwahc_probe() New device came up, create an instance for
- * it [from device enumeration].
- *
- * hwahc_disconnect() Remove device instance [from device
- * enumeration].
- *
- * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for
- * starting/stopping/etc (some might be made also
- * DWA).
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/workqueue.h>
-#include <linux/wait.h>
-#include <linux/completion.h>
-#include "../wa-hc.h"
-#include "../wusbhc.h"
-
-struct hwahc {
- struct wusbhc wusbhc; /* has to be 1st */
- struct wahc wa;
-};
-
-/*
- * FIXME should be wusbhc
- *
- * NOTE: we need to cache the Cluster ID because later...there is no
- * way to get it :)
- */
-static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id)
-{
- int result;
- struct wusbhc *wusbhc = &hwahc->wusbhc;
- struct wahc *wa = &hwahc->wa;
- struct device *dev = &wa->usb_iface->dev;
-
- result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- WUSB_REQ_SET_CLUSTER_ID,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- cluster_id,
- wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (result < 0)
- dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n",
- cluster_id, result);
- else
- wusbhc->cluster_id = cluster_id;
- dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id);
- return result;
-}
-
-static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots)
-{
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct wahc *wa = &hwahc->wa;
-
- return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- WUSB_REQ_SET_NUM_DNTS,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- interval << 8 | slots,
- wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
-}
-
-/*
- * Reset a WUSB host controller and wait for it to complete doing it.
- *
- * @usb_hcd: Pointer to WUSB Host Controller instance.
- *
- */
-static int hwahc_op_reset(struct usb_hcd *usb_hcd)
-{
- int result;
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct device *dev = &hwahc->wa.usb_iface->dev;
-
- mutex_lock(&wusbhc->mutex);
- wa_nep_disarm(&hwahc->wa);
- result = __wa_set_feature(&hwahc->wa, WA_RESET);
- if (result < 0) {
- dev_err(dev, "error commanding HC to reset: %d\n", result);
- goto error_unlock;
- }
- result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0);
- if (result < 0) {
- dev_err(dev, "error waiting for HC to reset: %d\n", result);
- goto error_unlock;
- }
-error_unlock:
- mutex_unlock(&wusbhc->mutex);
- return result;
-}
-
-/*
- * FIXME: break this function up
- */
-static int hwahc_op_start(struct usb_hcd *usb_hcd)
-{
- u8 addr;
- int result;
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
-
- result = -ENOSPC;
- mutex_lock(&wusbhc->mutex);
- addr = wusb_cluster_id_get();
- if (addr == 0)
- goto error_cluster_id_get;
- result = __hwahc_set_cluster_id(hwahc, addr);
- if (result < 0)
- goto error_set_cluster_id;
-
- usb_hcd->uses_new_polling = 1;
- set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags);
- usb_hcd->state = HC_STATE_RUNNING;
-
- /*
- * prevent USB core from suspending the root hub since
- * bus_suspend and bus_resume are not yet supported.
- */
- pm_runtime_get_noresume(&usb_hcd->self.root_hub->dev);
-
- result = 0;
-out:
- mutex_unlock(&wusbhc->mutex);
- return result;
-
-error_set_cluster_id:
- wusb_cluster_id_put(addr);
-error_cluster_id_get:
- goto out;
-
-}
-
-/*
- * No need to abort pipes, as when this is called, all the children
- * has been disconnected and that has done it [through
- * usb_disable_interface() -> usb_disable_endpoint() ->
- * hwahc_op_ep_disable() - >rpipe_ep_disable()].
- */
-static void hwahc_op_stop(struct usb_hcd *usb_hcd)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
-
- mutex_lock(&wusbhc->mutex);
- wusb_cluster_id_put(wusbhc->cluster_id);
- mutex_unlock(&wusbhc->mutex);
-}
-
-static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct wahc *wa = &hwahc->wa;
-
- /*
- * We cannot query the HWA for the WUSB time since that requires sending
- * a synchronous URB and this function can be called in_interrupt.
- * Instead, query the USB frame number for our parent and use that.
- */
- return usb_get_current_frame_number(wa->usb_dev);
-}
-
-static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb,
- gfp_t gfp)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
-
- return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp);
-}
-
-static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb,
- int status)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
-
- return wa_urb_dequeue(&hwahc->wa, urb, status);
-}
-
-/*
- * Release resources allocated for an endpoint
- *
- * If there is an associated rpipe to this endpoint, go ahead and put it.
- */
-static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd,
- struct usb_host_endpoint *ep)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
-
- rpipe_ep_disable(&hwahc->wa, ep);
-}
-
-static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc)
-{
- int result;
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct device *dev = &hwahc->wa.usb_iface->dev;
-
- result = __wa_set_feature(&hwahc->wa, WA_ENABLE);
- if (result < 0) {
- dev_err(dev, "error commanding HC to start: %d\n", result);
- goto error_stop;
- }
- result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE);
- if (result < 0) {
- dev_err(dev, "error waiting for HC to start: %d\n", result);
- goto error_stop;
- }
- result = wa_nep_arm(&hwahc->wa, GFP_KERNEL);
- if (result < 0) {
- dev_err(dev, "cannot listen to notifications: %d\n", result);
- goto error_stop;
- }
- /*
- * If WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS is set,
- * disable transfer notifications.
- */
- if (hwahc->wa.quirks &
- WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS) {
- struct usb_host_interface *cur_altsetting =
- hwahc->wa.usb_iface->cur_altsetting;
-
- result = usb_control_msg(hwahc->wa.usb_dev,
- usb_sndctrlpipe(hwahc->wa.usb_dev, 0),
- WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS,
- USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_INTERFACE,
- WA_REQ_ALEREON_FEATURE_SET,
- cur_altsetting->desc.bInterfaceNumber,
- NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- /*
- * If we successfully sent the control message, start DTI here
- * because no transfer notifications will be received which is
- * where DTI is normally started.
- */
- if (result == 0)
- result = wa_dti_start(&hwahc->wa);
- else
- result = 0; /* OK. Continue normally. */
-
- if (result < 0) {
- dev_err(dev, "cannot start DTI: %d\n", result);
- goto error_dti_start;
- }
- }
-
- return result;
-
-error_dti_start:
- wa_nep_disarm(&hwahc->wa);
-error_stop:
- __wa_clear_feature(&hwahc->wa, WA_ENABLE);
- return result;
-}
-
-static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc, int delay)
-{
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct wahc *wa = &hwahc->wa;
- u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
- int ret;
-
- ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- WUSB_REQ_CHAN_STOP,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- delay * 1000,
- iface_no,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (ret == 0)
- msleep(delay);
-
- wa_nep_disarm(&hwahc->wa);
- __wa_stop(&hwahc->wa);
-}
-
-/*
- * Set the UWB MAS allocation for the WUSB cluster
- *
- * @stream_index: stream to use (-1 for cancelling the allocation)
- * @mas: mas bitmap to use
- */
-static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index,
- const struct uwb_mas_bm *mas)
-{
- int result;
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct wahc *wa = &hwahc->wa;
- struct device *dev = &wa->usb_iface->dev;
- u8 mas_le[UWB_NUM_MAS/8];
-
- /* Set the stream index */
- result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- WUSB_REQ_SET_STREAM_IDX,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- stream_index,
- wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (result < 0) {
- dev_err(dev, "Cannot set WUSB stream index: %d\n", result);
- goto out;
- }
- uwb_mas_bm_copy_le(mas_le, mas);
- /* Set the MAS allocation */
- result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- WUSB_REQ_SET_WUSB_MAS,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- mas_le, 32, USB_CTRL_SET_TIMEOUT);
- if (result < 0)
- dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result);
-out:
- return result;
-}
-
-/*
- * Add an IE to the host's MMC
- *
- * @interval: See WUSB1.0[8.5.3.1]
- * @repeat_cnt: See WUSB1.0[8.5.3.1]
- * @handle: See WUSB1.0[8.5.3.1]
- * @wuie: Pointer to the header of the WUSB IE data to add.
- * MUST BE allocated in a kmalloc buffer (no stack or
- * vmalloc).
- *
- * NOTE: the format of the WUSB IEs for MMCs are different to the
- * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length +
- * Id in WUSB IEs). Standards...you gotta love'em.
- */
-static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval,
- u8 repeat_cnt, u8 handle,
- struct wuie_hdr *wuie)
-{
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct wahc *wa = &hwahc->wa;
- u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
-
- return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- WUSB_REQ_ADD_MMC_IE,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- interval << 8 | repeat_cnt,
- handle << 8 | iface_no,
- wuie, wuie->bLength, USB_CTRL_SET_TIMEOUT);
-}
-
-/*
- * Remove an IE to the host's MMC
- *
- * @handle: See WUSB1.0[8.5.3.1]
- */
-static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle)
-{
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct wahc *wa = &hwahc->wa;
- u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
- return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- WUSB_REQ_REMOVE_MMC_IE,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, handle << 8 | iface_no,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
-}
-
-/*
- * Update device information for a given fake port
- *
- * @port_idx: Fake port to which device is connected (wusbhc index, not
- * USB port number).
- */
-static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc,
- struct wusb_dev *wusb_dev)
-{
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct wahc *wa = &hwahc->wa;
- u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
- struct hwa_dev_info *dev_info;
- int ret;
-
- /* fill out the Device Info buffer and send it */
- dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL);
- if (!dev_info)
- return -ENOMEM;
- uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability,
- &wusb_dev->availability);
- dev_info->bDeviceAddress = wusb_dev->addr;
-
- /*
- * If the descriptors haven't been read yet, use a default PHY
- * rate of 53.3 Mbit/s only. The correct value will be used
- * when this will be called again as part of the
- * authentication process (which occurs after the descriptors
- * have been read).
- */
- if (wusb_dev->wusb_cap_descr)
- dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates;
- else
- dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53);
-
- ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- WUSB_REQ_SET_DEV_INFO,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, wusb_dev->port_idx << 8 | iface_no,
- dev_info, sizeof(struct hwa_dev_info),
- USB_CTRL_SET_TIMEOUT);
- kfree(dev_info);
- return ret;
-}
-
-/*
- * Set host's idea of which encryption (and key) method to use when
- * talking to ad evice on a given port.
- *
- * If key is NULL, it means disable encryption for that "virtual port"
- * (used when we disconnect).
- */
-static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
- const void *key, size_t key_size,
- u8 key_idx)
-{
- int result = -ENOMEM;
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct wahc *wa = &hwahc->wa;
- u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
- struct usb_key_descriptor *keyd;
- size_t keyd_len;
-
- keyd_len = sizeof(*keyd) + key_size;
- keyd = kzalloc(keyd_len, GFP_KERNEL);
- if (keyd == NULL)
- return -ENOMEM;
-
- keyd->bLength = keyd_len;
- keyd->bDescriptorType = USB_DT_KEY;
- keyd->tTKID[0] = (tkid >> 0) & 0xff;
- keyd->tTKID[1] = (tkid >> 8) & 0xff;
- keyd->tTKID[2] = (tkid >> 16) & 0xff;
- memcpy(keyd->bKeyData, key, key_size);
-
- result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- USB_REQ_SET_DESCRIPTOR,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- USB_DT_KEY << 8 | key_idx,
- port_idx << 8 | iface_no,
- keyd, keyd_len, USB_CTRL_SET_TIMEOUT);
-
- kzfree(keyd); /* clear keys etc. */
- return result;
-}
-
-/*
- * Set host's idea of which encryption (and key) method to use when
- * talking to ad evice on a given port.
- *
- * If key is NULL, it means disable encryption for that "virtual port"
- * (used when we disconnect).
- */
-static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
- const void *key, size_t key_size)
-{
- int result = -ENOMEM;
- struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- struct wahc *wa = &hwahc->wa;
- u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
- u8 encryption_value;
-
- /* Tell the host which key to use to talk to the device */
- if (key) {
- u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK,
- WUSB_KEY_INDEX_ORIGINATOR_HOST);
-
- result = __hwahc_dev_set_key(wusbhc, port_idx, tkid,
- key, key_size, key_idx);
- if (result < 0)
- goto error_set_key;
- encryption_value = wusbhc->ccm1_etd->bEncryptionValue;
- } else {
- /* FIXME: this should come from wusbhc->etd[UNSECURE].value */
- encryption_value = 0;
- }
-
- /* Set the encryption type for communicating with the device */
- result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- USB_REQ_SET_ENCRYPTION,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- encryption_value, port_idx << 8 | iface_no,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (result < 0)
- dev_err(wusbhc->dev, "Can't set host's WUSB encryption for "
- "port index %u to %s (value %d): %d\n", port_idx,
- wusb_et_name(wusbhc->ccm1_etd->bEncryptionType),
- wusbhc->ccm1_etd->bEncryptionValue, result);
-error_set_key:
- return result;
-}
-
-/*
- * Set host's GTK key
- */
-static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid,
- const void *key, size_t key_size)
-{
- u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK,
- WUSB_KEY_INDEX_ORIGINATOR_HOST);
-
- return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx);
-}
-
-/*
- * Get the Wire Adapter class-specific descriptor
- *
- * NOTE: this descriptor comes with the big bundled configuration
- * descriptor that includes the interfaces' and endpoints', so
- * we just look for it in the cached copy kept by the USB stack.
- *
- * NOTE2: We convert LE fields to CPU order.
- */
-static int wa_fill_descr(struct wahc *wa)
-{
- int result;
- struct device *dev = &wa->usb_iface->dev;
- char *itr;
- struct usb_device *usb_dev = wa->usb_dev;
- struct usb_descriptor_header *hdr;
- struct usb_wa_descriptor *wa_descr;
- size_t itr_size, actconfig_idx;
-
- actconfig_idx = (usb_dev->actconfig - usb_dev->config) /
- sizeof(usb_dev->config[0]);
- itr = usb_dev->rawdescriptors[actconfig_idx];
- itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
- while (itr_size >= sizeof(*hdr)) {
- hdr = (struct usb_descriptor_header *) itr;
- dev_dbg(dev, "Extra device descriptor: "
- "type %02x/%u bytes @ %zu (%zu left)\n",
- hdr->bDescriptorType, hdr->bLength,
- (itr - usb_dev->rawdescriptors[actconfig_idx]),
- itr_size);
- if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER)
- goto found;
- itr += hdr->bLength;
- itr_size -= hdr->bLength;
- }
- dev_err(dev, "cannot find Wire Adapter Class descriptor\n");
- return -ENODEV;
-
-found:
- result = -EINVAL;
- if (hdr->bLength > itr_size) { /* is it available? */
- dev_err(dev, "incomplete Wire Adapter Class descriptor "
- "(%zu bytes left, %u needed)\n",
- itr_size, hdr->bLength);
- goto error;
- }
- if (hdr->bLength < sizeof(*wa->wa_descr)) {
- dev_err(dev, "short Wire Adapter Class descriptor\n");
- goto error;
- }
- wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr;
- if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100)
- dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n",
- (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8,
- le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff);
- result = 0;
-error:
- return result;
-}
-
-static const struct hc_driver hwahc_hc_driver = {
- .description = "hwa-hcd",
- .product_desc = "Wireless USB HWA host controller",
- .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd),
- .irq = NULL, /* FIXME */
- .flags = HCD_USB25,
- .reset = hwahc_op_reset,
- .start = hwahc_op_start,
- .stop = hwahc_op_stop,
- .get_frame_number = hwahc_op_get_frame_number,
- .urb_enqueue = hwahc_op_urb_enqueue,
- .urb_dequeue = hwahc_op_urb_dequeue,
- .endpoint_disable = hwahc_op_endpoint_disable,
-
- .hub_status_data = wusbhc_rh_status_data,
- .hub_control = wusbhc_rh_control,
- .start_port_reset = wusbhc_rh_start_port_reset,
-};
-
-static int hwahc_security_create(struct hwahc *hwahc)
-{
- int result;
- struct wusbhc *wusbhc = &hwahc->wusbhc;
- struct usb_device *usb_dev = hwahc->wa.usb_dev;
- struct device *dev = &usb_dev->dev;
- struct usb_security_descriptor *secd;
- struct usb_encryption_descriptor *etd;
- void *itr, *top;
- size_t itr_size, needed, bytes;
- u8 index;
- char buf[64];
-
- /* Find the host's security descriptors in the config descr bundle */
- index = (usb_dev->actconfig - usb_dev->config) /
- sizeof(usb_dev->config[0]);
- itr = usb_dev->rawdescriptors[index];
- itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
- top = itr + itr_size;
- result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index],
- le16_to_cpu(usb_dev->actconfig->desc.wTotalLength),
- USB_DT_SECURITY, (void **) &secd, sizeof(*secd));
- if (result == -1) {
- dev_warn(dev, "BUG? WUSB host has no security descriptors\n");
- return 0;
- }
- needed = sizeof(*secd);
- if (top - (void *)secd < needed) {
- dev_err(dev, "BUG? Not enough data to process security "
- "descriptor header (%zu bytes left vs %zu needed)\n",
- top - (void *) secd, needed);
- return 0;
- }
- needed = le16_to_cpu(secd->wTotalLength);
- if (top - (void *)secd < needed) {
- dev_err(dev, "BUG? Not enough data to process security "
- "descriptors (%zu bytes left vs %zu needed)\n",
- top - (void *) secd, needed);
- return 0;
- }
- /* Walk over the sec descriptors and store CCM1's on wusbhc */
- itr = (void *) secd + sizeof(*secd);
- top = (void *) secd + le16_to_cpu(secd->wTotalLength);
- index = 0;
- bytes = 0;
- while (itr < top) {
- etd = itr;
- if (top - itr < sizeof(*etd)) {
- dev_err(dev, "BUG: bad host security descriptor; "
- "not enough data (%zu vs %zu left)\n",
- top - itr, sizeof(*etd));
- break;
- }
- if (etd->bLength < sizeof(*etd)) {
- dev_err(dev, "BUG: bad host encryption descriptor; "
- "descriptor is too short "
- "(%zu vs %zu needed)\n",
- (size_t)etd->bLength, sizeof(*etd));
- break;
- }
- itr += etd->bLength;
- bytes += snprintf(buf + bytes, sizeof(buf) - bytes,
- "%s (0x%02x) ",
- wusb_et_name(etd->bEncryptionType),
- etd->bEncryptionValue);
- wusbhc->ccm1_etd = etd;
- }
- dev_info(dev, "supported encryption types: %s\n", buf);
- if (wusbhc->ccm1_etd == NULL) {
- dev_err(dev, "E: host doesn't support CCM-1 crypto\n");
- return 0;
- }
- /* Pretty print what we support */
- return 0;
-}
-
-static void hwahc_security_release(struct hwahc *hwahc)
-{
- /* nothing to do here so far... */
-}
-
-static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface,
- kernel_ulong_t quirks)
-{
- int result;
- struct device *dev = &iface->dev;
- struct wusbhc *wusbhc = &hwahc->wusbhc;
- struct wahc *wa = &hwahc->wa;
- struct usb_device *usb_dev = interface_to_usbdev(iface);
-
- wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */
- wa->usb_iface = usb_get_intf(iface);
- wusbhc->dev = dev;
- /* defer getting the uwb_rc handle until it is needed since it
- * may not have been registered by the hwa_rc driver yet. */
- wusbhc->uwb_rc = NULL;
- result = wa_fill_descr(wa); /* Get the device descriptor */
- if (result < 0)
- goto error_fill_descriptor;
- if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) {
- dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB "
- "adapter (%u ports)\n", wa->wa_descr->bNumPorts);
- wusbhc->ports_max = USB_MAXCHILDREN;
- } else {
- wusbhc->ports_max = wa->wa_descr->bNumPorts;
- }
- wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs;
- wusbhc->start = __hwahc_op_wusbhc_start;
- wusbhc->stop = __hwahc_op_wusbhc_stop;
- wusbhc->mmcie_add = __hwahc_op_mmcie_add;
- wusbhc->mmcie_rm = __hwahc_op_mmcie_rm;
- wusbhc->dev_info_set = __hwahc_op_dev_info_set;
- wusbhc->bwa_set = __hwahc_op_bwa_set;
- wusbhc->set_num_dnts = __hwahc_op_set_num_dnts;
- wusbhc->set_ptk = __hwahc_op_set_ptk;
- wusbhc->set_gtk = __hwahc_op_set_gtk;
- result = hwahc_security_create(hwahc);
- if (result < 0) {
- dev_err(dev, "Can't initialize security: %d\n", result);
- goto error_security_create;
- }
- wa->wusb = wusbhc; /* FIXME: ugly, need to fix */
- result = wusbhc_create(&hwahc->wusbhc);
- if (result < 0) {
- dev_err(dev, "Can't create WUSB HC structures: %d\n", result);
- goto error_wusbhc_create;
- }
- result = wa_create(&hwahc->wa, iface, quirks);
- if (result < 0)
- goto error_wa_create;
- return 0;
-
-error_wa_create:
- wusbhc_destroy(&hwahc->wusbhc);
-error_wusbhc_create:
- /* WA Descr fill allocs no resources */
-error_security_create:
-error_fill_descriptor:
- usb_put_intf(iface);
- usb_put_dev(usb_dev);
- return result;
-}
-
-static void hwahc_destroy(struct hwahc *hwahc)
-{
- struct wusbhc *wusbhc = &hwahc->wusbhc;
-
- mutex_lock(&wusbhc->mutex);
- __wa_destroy(&hwahc->wa);
- wusbhc_destroy(&hwahc->wusbhc);
- hwahc_security_release(hwahc);
- hwahc->wusbhc.dev = NULL;
- uwb_rc_put(wusbhc->uwb_rc);
- usb_put_intf(hwahc->wa.usb_iface);
- usb_put_dev(hwahc->wa.usb_dev);
- mutex_unlock(&wusbhc->mutex);
-}
-
-static void hwahc_init(struct hwahc *hwahc)
-{
- wa_init(&hwahc->wa);
-}
-
-static int hwahc_probe(struct usb_interface *usb_iface,
- const struct usb_device_id *id)
-{
- int result;
- struct usb_hcd *usb_hcd;
- struct wusbhc *wusbhc;
- struct hwahc *hwahc;
- struct device *dev = &usb_iface->dev;
-
- result = -ENOMEM;
- usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa");
- if (usb_hcd == NULL) {
- dev_err(dev, "unable to allocate instance\n");
- goto error_alloc;
- }
- usb_hcd->wireless = 1;
- usb_hcd->self.sg_tablesize = ~0;
- wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- hwahc = container_of(wusbhc, struct hwahc, wusbhc);
- hwahc_init(hwahc);
- result = hwahc_create(hwahc, usb_iface, id->driver_info);
- if (result < 0) {
- dev_err(dev, "Cannot initialize internals: %d\n", result);
- goto error_hwahc_create;
- }
- result = usb_add_hcd(usb_hcd, 0, 0);
- if (result < 0) {
- dev_err(dev, "Cannot add HCD: %d\n", result);
- goto error_add_hcd;
- }
- device_wakeup_enable(usb_hcd->self.controller);
- result = wusbhc_b_create(&hwahc->wusbhc);
- if (result < 0) {
- dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result);
- goto error_wusbhc_b_create;
- }
- return 0;
-
-error_wusbhc_b_create:
- usb_remove_hcd(usb_hcd);
-error_add_hcd:
- hwahc_destroy(hwahc);
-error_hwahc_create:
- usb_put_hcd(usb_hcd);
-error_alloc:
- return result;
-}
-
-static void hwahc_disconnect(struct usb_interface *usb_iface)
-{
- struct usb_hcd *usb_hcd;
- struct wusbhc *wusbhc;
- struct hwahc *hwahc;
-
- usb_hcd = usb_get_intfdata(usb_iface);
- wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- hwahc = container_of(wusbhc, struct hwahc, wusbhc);
-
- wusbhc_b_destroy(&hwahc->wusbhc);
- usb_remove_hcd(usb_hcd);
- hwahc_destroy(hwahc);
- usb_put_hcd(usb_hcd);
-}
-
-static const struct usb_device_id hwahc_id_table[] = {
- /* Alereon 5310 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x02, 0x01),
- .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC |
- WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS },
- /* Alereon 5611 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x02, 0x01),
- .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC |
- WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS },
- /* FIXME: use class labels for this */
- { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), },
- {},
-};
-MODULE_DEVICE_TABLE(usb, hwahc_id_table);
-
-static struct usb_driver hwahc_driver = {
- .name = "hwa-hc",
- .probe = hwahc_probe,
- .disconnect = hwahc_disconnect,
- .id_table = hwahc_id_table,
-};
-
-module_usb_driver(hwahc_driver);
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-
-obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o
-
-whci-hcd-y := \
- asl.o \
- debug.o \
- hcd.o \
- hw.o \
- init.o \
- int.o \
- pzl.o \
- qset.o \
- wusb.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) asynchronous schedule management.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/dma-mapping.h>
-#include <linux/usb.h>
-
-#include "../../../uwb/include/umc.h"
-#include "../../wusbhc.h"
-
-#include "whcd.h"
-
-static void qset_get_next_prev(struct whc *whc, struct whc_qset *qset,
- struct whc_qset **next, struct whc_qset **prev)
-{
- struct list_head *n, *p;
-
- BUG_ON(list_empty(&whc->async_list));
-
- n = qset->list_node.next;
- if (n == &whc->async_list)
- n = n->next;
- p = qset->list_node.prev;
- if (p == &whc->async_list)
- p = p->prev;
-
- *next = container_of(n, struct whc_qset, list_node);
- *prev = container_of(p, struct whc_qset, list_node);
-
-}
-
-static void asl_qset_insert_begin(struct whc *whc, struct whc_qset *qset)
-{
- list_move(&qset->list_node, &whc->async_list);
- qset->in_sw_list = true;
-}
-
-static void asl_qset_insert(struct whc *whc, struct whc_qset *qset)
-{
- struct whc_qset *next, *prev;
-
- qset_clear(whc, qset);
-
- /* Link into ASL. */
- qset_get_next_prev(whc, qset, &next, &prev);
- whc_qset_set_link_ptr(&qset->qh.link, next->qset_dma);
- whc_qset_set_link_ptr(&prev->qh.link, qset->qset_dma);
- qset->in_hw_list = true;
-}
-
-static void asl_qset_remove(struct whc *whc, struct whc_qset *qset)
-{
- struct whc_qset *prev, *next;
-
- qset_get_next_prev(whc, qset, &next, &prev);
-
- list_move(&qset->list_node, &whc->async_removed_list);
- qset->in_sw_list = false;
-
- /*
- * No more qsets in the ASL? The caller must stop the ASL as
- * it's no longer valid.
- */
- if (list_empty(&whc->async_list))
- return;
-
- /* Remove from ASL. */
- whc_qset_set_link_ptr(&prev->qh.link, next->qset_dma);
- qset->in_hw_list = false;
-}
-
-/**
- * process_qset - process any recently inactivated or halted qTDs in a
- * qset.
- *
- * After inactive qTDs are removed, new qTDs can be added if the
- * urb queue still contains URBs.
- *
- * Returns any additional WUSBCMD bits for the ASL sync command (i.e.,
- * WUSBCMD_ASYNC_QSET_RM if a halted qset was removed).
- */
-static uint32_t process_qset(struct whc *whc, struct whc_qset *qset)
-{
- enum whc_update update = 0;
- uint32_t status = 0;
-
- while (qset->ntds) {
- struct whc_qtd *td;
-
- td = &qset->qtd[qset->td_start];
- status = le32_to_cpu(td->status);
-
- /*
- * Nothing to do with a still active qTD.
- */
- if (status & QTD_STS_ACTIVE)
- break;
-
- if (status & QTD_STS_HALTED) {
- /* Ug, an error. */
- process_halted_qtd(whc, qset, td);
- /* A halted qTD always triggers an update
- because the qset was either removed or
- reactivated. */
- update |= WHC_UPDATE_UPDATED;
- goto done;
- }
-
- /* Mmm, a completed qTD. */
- process_inactive_qtd(whc, qset, td);
- }
-
- if (!qset->remove)
- update |= qset_add_qtds(whc, qset);
-
-done:
- /*
- * Remove this qset from the ASL if requested, but only if has
- * no qTDs.
- */
- if (qset->remove && qset->ntds == 0) {
- asl_qset_remove(whc, qset);
- update |= WHC_UPDATE_REMOVED;
- }
- return update;
-}
-
-void asl_start(struct whc *whc)
-{
- struct whc_qset *qset;
-
- qset = list_first_entry(&whc->async_list, struct whc_qset, list_node);
-
- le_writeq(qset->qset_dma | QH_LINK_NTDS(8), whc->base + WUSBASYNCLISTADDR);
-
- whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, WUSBCMD_ASYNC_EN);
- whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
- WUSBSTS_ASYNC_SCHED, WUSBSTS_ASYNC_SCHED,
- 1000, "start ASL");
-}
-
-void asl_stop(struct whc *whc)
-{
- whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, 0);
- whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
- WUSBSTS_ASYNC_SCHED, 0,
- 1000, "stop ASL");
-}
-
-/**
- * asl_update - request an ASL update and wait for the hardware to be synced
- * @whc: the WHCI HC
- * @wusbcmd: WUSBCMD value to start the update.
- *
- * If the WUSB HC is inactive (i.e., the ASL is stopped) then the
- * update must be skipped as the hardware may not respond to update
- * requests.
- */
-void asl_update(struct whc *whc, uint32_t wusbcmd)
-{
- struct wusbhc *wusbhc = &whc->wusbhc;
- long t;
-
- mutex_lock(&wusbhc->mutex);
- if (wusbhc->active) {
- whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
- t = wait_event_timeout(
- whc->async_list_wq,
- (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0,
- msecs_to_jiffies(1000));
- if (t == 0)
- whc_hw_error(whc, "ASL update timeout");
- }
- mutex_unlock(&wusbhc->mutex);
-}
-
-/**
- * scan_async_work - scan the ASL for qsets to process.
- *
- * Process each qset in the ASL in turn and then signal the WHC that
- * the ASL has been updated.
- *
- * Then start, stop or update the asynchronous schedule as required.
- */
-void scan_async_work(struct work_struct *work)
-{
- struct whc *whc = container_of(work, struct whc, async_work);
- struct whc_qset *qset, *t;
- enum whc_update update = 0;
-
- spin_lock_irq(&whc->lock);
-
- /*
- * Transerve the software list backwards so new qsets can be
- * safely inserted into the ASL without making it non-circular.
- */
- list_for_each_entry_safe_reverse(qset, t, &whc->async_list, list_node) {
- if (!qset->in_hw_list) {
- asl_qset_insert(whc, qset);
- update |= WHC_UPDATE_ADDED;
- }
-
- update |= process_qset(whc, qset);
- }
-
- spin_unlock_irq(&whc->lock);
-
- if (update) {
- uint32_t wusbcmd = WUSBCMD_ASYNC_UPDATED | WUSBCMD_ASYNC_SYNCED_DB;
- if (update & WHC_UPDATE_REMOVED)
- wusbcmd |= WUSBCMD_ASYNC_QSET_RM;
- asl_update(whc, wusbcmd);
- }
-
- /*
- * Now that the ASL is updated, complete the removal of any
- * removed qsets.
- *
- * If the qset was to be reset, do so and reinsert it into the
- * ASL if it has pending transfers.
- */
- spin_lock_irq(&whc->lock);
-
- list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) {
- qset_remove_complete(whc, qset);
- if (qset->reset) {
- qset_reset(whc, qset);
- if (!list_empty(&qset->stds)) {
- asl_qset_insert_begin(whc, qset);
- queue_work(whc->workqueue, &whc->async_work);
- }
- }
- }
-
- spin_unlock_irq(&whc->lock);
-}
-
-/**
- * asl_urb_enqueue - queue an URB onto the asynchronous list (ASL).
- * @whc: the WHCI host controller
- * @urb: the URB to enqueue
- * @mem_flags: flags for any memory allocations
- *
- * The qset for the endpoint is obtained and the urb queued on to it.
- *
- * Work is scheduled to update the hardware's view of the ASL.
- */
-int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
-{
- struct whc_qset *qset;
- int err;
- unsigned long flags;
-
- spin_lock_irqsave(&whc->lock, flags);
-
- err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
- if (err < 0) {
- spin_unlock_irqrestore(&whc->lock, flags);
- return err;
- }
-
- qset = get_qset(whc, urb, GFP_ATOMIC);
- if (qset == NULL)
- err = -ENOMEM;
- else
- err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
- if (!err) {
- if (!qset->in_sw_list && !qset->remove)
- asl_qset_insert_begin(whc, qset);
- } else
- usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
-
- spin_unlock_irqrestore(&whc->lock, flags);
-
- if (!err)
- queue_work(whc->workqueue, &whc->async_work);
-
- return err;
-}
-
-/**
- * asl_urb_dequeue - remove an URB (qset) from the async list.
- * @whc: the WHCI host controller
- * @urb: the URB to dequeue
- * @status: the current status of the URB
- *
- * URBs that do yet have qTDs can simply be removed from the software
- * queue, otherwise the qset must be removed from the ASL so the qTDs
- * can be removed.
- */
-int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
-{
- struct whc_urb *wurb = urb->hcpriv;
- struct whc_qset *qset = wurb->qset;
- struct whc_std *std, *t;
- bool has_qtd = false;
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&whc->lock, flags);
-
- ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status);
- if (ret < 0)
- goto out;
-
- list_for_each_entry_safe(std, t, &qset->stds, list_node) {
- if (std->urb == urb) {
- if (std->qtd)
- has_qtd = true;
- qset_free_std(whc, std);
- } else
- std->qtd = NULL; /* so this std is re-added when the qset is */
- }
-
- if (has_qtd) {
- asl_qset_remove(whc, qset);
- wurb->status = status;
- wurb->is_async = true;
- queue_work(whc->workqueue, &wurb->dequeue_work);
- } else
- qset_remove_urb(whc, qset, urb, status);
-out:
- spin_unlock_irqrestore(&whc->lock, flags);
-
- return ret;
-}
-
-/**
- * asl_qset_delete - delete a qset from the ASL
- */
-void asl_qset_delete(struct whc *whc, struct whc_qset *qset)
-{
- qset->remove = 1;
- queue_work(whc->workqueue, &whc->async_work);
- qset_delete(whc, qset);
-}
-
-/**
- * asl_init - initialize the asynchronous schedule list
- *
- * A dummy qset with no qTDs is added to the ASL to simplify removing
- * qsets (no need to stop the ASL when the last qset is removed).
- */
-int asl_init(struct whc *whc)
-{
- struct whc_qset *qset;
-
- qset = qset_alloc(whc, GFP_KERNEL);
- if (qset == NULL)
- return -ENOMEM;
-
- asl_qset_insert_begin(whc, qset);
- asl_qset_insert(whc, qset);
-
- return 0;
-}
-
-/**
- * asl_clean_up - free ASL resources
- *
- * The ASL is stopped and empty except for the dummy qset.
- */
-void asl_clean_up(struct whc *whc)
-{
- struct whc_qset *qset;
-
- if (!list_empty(&whc->async_list)) {
- qset = list_first_entry(&whc->async_list, struct whc_qset, list_node);
- list_del(&qset->list_node);
- qset_free(whc, qset);
- }
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) debug.
- *
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- */
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/export.h>
-
-#include "../../wusbhc.h"
-
-#include "whcd.h"
-
-struct whc_dbg {
- struct dentry *di_f;
- struct dentry *asl_f;
- struct dentry *pzl_f;
-};
-
-static void qset_print(struct seq_file *s, struct whc_qset *qset)
-{
- static const char *qh_type[] = {
- "ctrl", "isoc", "bulk", "intr", "rsvd", "rsvd", "rsvd", "lpintr", };
- struct whc_std *std;
- struct urb *urb = NULL;
- int i;
-
- seq_printf(s, "qset %08x", (u32)qset->qset_dma);
- if (&qset->list_node == qset->whc->async_list.prev) {
- seq_printf(s, " (dummy)\n");
- } else {
- seq_printf(s, " ep%d%s-%s maxpkt: %d\n",
- qset->qh.info1 & 0x0f,
- (qset->qh.info1 >> 4) & 0x1 ? "in" : "out",
- qh_type[(qset->qh.info1 >> 5) & 0x7],
- (qset->qh.info1 >> 16) & 0xffff);
- }
- seq_printf(s, " -> %08x\n", (u32)qset->qh.link);
- seq_printf(s, " info: %08x %08x %08x\n",
- qset->qh.info1, qset->qh.info2, qset->qh.info3);
- seq_printf(s, " sts: %04x errs: %d curwin: %08x\n",
- qset->qh.status, qset->qh.err_count, qset->qh.cur_window);
- seq_printf(s, " TD: sts: %08x opts: %08x\n",
- qset->qh.overlay.qtd.status, qset->qh.overlay.qtd.options);
-
- for (i = 0; i < WHCI_QSET_TD_MAX; i++) {
- seq_printf(s, " %c%c TD[%d]: sts: %08x opts: %08x ptr: %08x\n",
- i == qset->td_start ? 'S' : ' ',
- i == qset->td_end ? 'E' : ' ',
- i, qset->qtd[i].status, qset->qtd[i].options,
- (u32)qset->qtd[i].page_list_ptr);
- }
- seq_printf(s, " ntds: %d\n", qset->ntds);
- list_for_each_entry(std, &qset->stds, list_node) {
- if (urb != std->urb) {
- urb = std->urb;
- seq_printf(s, " urb %p transferred: %d bytes\n", urb,
- urb->actual_length);
- }
- if (std->qtd)
- seq_printf(s, " sTD[%td]: %zu bytes @ %08x\n",
- std->qtd - &qset->qtd[0],
- std->len, std->num_pointers ?
- (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr);
- else
- seq_printf(s, " sTD[-]: %zd bytes @ %08x\n",
- std->len, std->num_pointers ?
- (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr);
- }
-}
-
-static int di_show(struct seq_file *s, void *p)
-{
- struct whc *whc = s->private;
- int d;
-
- for (d = 0; d < whc->n_devices; d++) {
- struct di_buf_entry *di = &whc->di_buf[d];
-
- seq_printf(s, "DI[%d]\n", d);
- seq_printf(s, " availability: %*pb\n",
- UWB_NUM_MAS, (unsigned long *)di->availability_info);
- seq_printf(s, " %c%c key idx: %d dev addr: %d\n",
- (di->addr_sec_info & WHC_DI_SECURE) ? 'S' : ' ',
- (di->addr_sec_info & WHC_DI_DISABLE) ? 'D' : ' ',
- (di->addr_sec_info & WHC_DI_KEY_IDX_MASK) >> 8,
- (di->addr_sec_info & WHC_DI_DEV_ADDR_MASK));
- }
- return 0;
-}
-DEFINE_SHOW_ATTRIBUTE(di);
-
-static int asl_show(struct seq_file *s, void *p)
-{
- struct whc *whc = s->private;
- struct whc_qset *qset;
-
- list_for_each_entry(qset, &whc->async_list, list_node) {
- qset_print(s, qset);
- }
-
- return 0;
-}
-DEFINE_SHOW_ATTRIBUTE(asl);
-
-static int pzl_show(struct seq_file *s, void *p)
-{
- struct whc *whc = s->private;
- struct whc_qset *qset;
- int period;
-
- for (period = 0; period < 5; period++) {
- seq_printf(s, "Period %d\n", period);
- list_for_each_entry(qset, &whc->periodic_list[period], list_node) {
- qset_print(s, qset);
- }
- }
- return 0;
-}
-DEFINE_SHOW_ATTRIBUTE(pzl);
-
-void whc_dbg_init(struct whc *whc)
-{
- if (whc->wusbhc.pal.debugfs_dir == NULL)
- return;
-
- whc->dbg = kzalloc(sizeof(struct whc_dbg), GFP_KERNEL);
- if (whc->dbg == NULL)
- return;
-
- whc->dbg->di_f = debugfs_create_file("di", 0444,
- whc->wusbhc.pal.debugfs_dir, whc,
- &di_fops);
- whc->dbg->asl_f = debugfs_create_file("asl", 0444,
- whc->wusbhc.pal.debugfs_dir, whc,
- &asl_fops);
- whc->dbg->pzl_f = debugfs_create_file("pzl", 0444,
- whc->wusbhc.pal.debugfs_dir, whc,
- &pzl_fops);
-}
-
-void whc_dbg_clean_up(struct whc *whc)
-{
- if (whc->dbg) {
- debugfs_remove(whc->dbg->pzl_f);
- debugfs_remove(whc->dbg->asl_f);
- debugfs_remove(whc->dbg->di_f);
- kfree(whc->dbg);
- }
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) driver.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include "../../../uwb/include/umc.h"
-#include "../../wusbhc.h"
-
-#include "whcd.h"
-
-/*
- * One time initialization.
- *
- * Nothing to do here.
- */
-static int whc_reset(struct usb_hcd *usb_hcd)
-{
- return 0;
-}
-
-/*
- * Start the wireless host controller.
- *
- * Start device notification.
- *
- * Put hc into run state, set DNTS parameters.
- */
-static int whc_start(struct usb_hcd *usb_hcd)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct whc *whc = wusbhc_to_whc(wusbhc);
- u8 bcid;
- int ret;
-
- mutex_lock(&wusbhc->mutex);
-
- le_writel(WUSBINTR_GEN_CMD_DONE
- | WUSBINTR_HOST_ERR
- | WUSBINTR_ASYNC_SCHED_SYNCED
- | WUSBINTR_DNTS_INT
- | WUSBINTR_ERR_INT
- | WUSBINTR_INT,
- whc->base + WUSBINTR);
-
- /* set cluster ID */
- bcid = wusb_cluster_id_get();
- ret = whc_set_cluster_id(whc, bcid);
- if (ret < 0)
- goto out;
- wusbhc->cluster_id = bcid;
-
- /* start HC */
- whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN);
-
- usb_hcd->uses_new_polling = 1;
- set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags);
- usb_hcd->state = HC_STATE_RUNNING;
-
-out:
- mutex_unlock(&wusbhc->mutex);
- return ret;
-}
-
-
-/*
- * Stop the wireless host controller.
- *
- * Stop device notification.
- *
- * Wait for pending transfer to stop? Put hc into stop state?
- */
-static void whc_stop(struct usb_hcd *usb_hcd)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct whc *whc = wusbhc_to_whc(wusbhc);
-
- mutex_lock(&wusbhc->mutex);
-
- /* stop HC */
- le_writel(0, whc->base + WUSBINTR);
- whc_write_wusbcmd(whc, WUSBCMD_RUN, 0);
- whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
- WUSBSTS_HCHALTED, WUSBSTS_HCHALTED,
- 100, "HC to halt");
-
- wusb_cluster_id_put(wusbhc->cluster_id);
-
- mutex_unlock(&wusbhc->mutex);
-}
-
-static int whc_get_frame_number(struct usb_hcd *usb_hcd)
-{
- /* Frame numbers are not applicable to WUSB. */
- return -ENOSYS;
-}
-
-
-/*
- * Queue an URB to the ASL or PZL
- */
-static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb,
- gfp_t mem_flags)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct whc *whc = wusbhc_to_whc(wusbhc);
- int ret;
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_INTERRUPT:
- ret = pzl_urb_enqueue(whc, urb, mem_flags);
- break;
- case PIPE_ISOCHRONOUS:
- dev_err(&whc->umc->dev, "isochronous transfers unsupported\n");
- ret = -ENOTSUPP;
- break;
- case PIPE_CONTROL:
- case PIPE_BULK:
- default:
- ret = asl_urb_enqueue(whc, urb, mem_flags);
- break;
- }
-
- return ret;
-}
-
-/*
- * Remove a queued URB from the ASL or PZL.
- */
-static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct whc *whc = wusbhc_to_whc(wusbhc);
- int ret;
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_INTERRUPT:
- ret = pzl_urb_dequeue(whc, urb, status);
- break;
- case PIPE_ISOCHRONOUS:
- ret = -ENOTSUPP;
- break;
- case PIPE_CONTROL:
- case PIPE_BULK:
- default:
- ret = asl_urb_dequeue(whc, urb, status);
- break;
- }
-
- return ret;
-}
-
-/*
- * Wait for all URBs to the endpoint to be completed, then delete the
- * qset.
- */
-static void whc_endpoint_disable(struct usb_hcd *usb_hcd,
- struct usb_host_endpoint *ep)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct whc *whc = wusbhc_to_whc(wusbhc);
- struct whc_qset *qset;
-
- qset = ep->hcpriv;
- if (qset) {
- ep->hcpriv = NULL;
- if (usb_endpoint_xfer_bulk(&ep->desc)
- || usb_endpoint_xfer_control(&ep->desc))
- asl_qset_delete(whc, qset);
- else
- pzl_qset_delete(whc, qset);
- }
-}
-
-static void whc_endpoint_reset(struct usb_hcd *usb_hcd,
- struct usb_host_endpoint *ep)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct whc *whc = wusbhc_to_whc(wusbhc);
- struct whc_qset *qset;
- unsigned long flags;
-
- spin_lock_irqsave(&whc->lock, flags);
-
- qset = ep->hcpriv;
- if (qset) {
- qset->remove = 1;
- qset->reset = 1;
-
- if (usb_endpoint_xfer_bulk(&ep->desc)
- || usb_endpoint_xfer_control(&ep->desc))
- queue_work(whc->workqueue, &whc->async_work);
- else
- queue_work(whc->workqueue, &whc->periodic_work);
- }
-
- spin_unlock_irqrestore(&whc->lock, flags);
-}
-
-
-static const struct hc_driver whc_hc_driver = {
- .description = "whci-hcd",
- .product_desc = "Wireless host controller",
- .hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd),
- .irq = whc_int_handler,
- .flags = HCD_USB2,
-
- .reset = whc_reset,
- .start = whc_start,
- .stop = whc_stop,
- .get_frame_number = whc_get_frame_number,
- .urb_enqueue = whc_urb_enqueue,
- .urb_dequeue = whc_urb_dequeue,
- .endpoint_disable = whc_endpoint_disable,
- .endpoint_reset = whc_endpoint_reset,
-
- .hub_status_data = wusbhc_rh_status_data,
- .hub_control = wusbhc_rh_control,
- .start_port_reset = wusbhc_rh_start_port_reset,
-};
-
-static int whc_probe(struct umc_dev *umc)
-{
- int ret;
- struct usb_hcd *usb_hcd;
- struct wusbhc *wusbhc;
- struct whc *whc;
- struct device *dev = &umc->dev;
-
- usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci");
- if (usb_hcd == NULL) {
- dev_err(dev, "unable to create hcd\n");
- return -ENOMEM;
- }
-
- usb_hcd->wireless = 1;
- usb_hcd->self.sg_tablesize = 2048; /* somewhat arbitrary */
-
- wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- whc = wusbhc_to_whc(wusbhc);
- whc->umc = umc;
-
- ret = whc_init(whc);
- if (ret)
- goto error_whc_init;
-
- wusbhc->dev = dev;
- wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent);
- if (!wusbhc->uwb_rc) {
- ret = -ENODEV;
- dev_err(dev, "cannot get radio controller\n");
- goto error_uwb_rc;
- }
-
- if (whc->n_devices > USB_MAXCHILDREN) {
- dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n",
- whc->n_devices);
- wusbhc->ports_max = USB_MAXCHILDREN;
- } else
- wusbhc->ports_max = whc->n_devices;
- wusbhc->mmcies_max = whc->n_mmc_ies;
- wusbhc->start = whc_wusbhc_start;
- wusbhc->stop = whc_wusbhc_stop;
- wusbhc->mmcie_add = whc_mmcie_add;
- wusbhc->mmcie_rm = whc_mmcie_rm;
- wusbhc->dev_info_set = whc_dev_info_set;
- wusbhc->bwa_set = whc_bwa_set;
- wusbhc->set_num_dnts = whc_set_num_dnts;
- wusbhc->set_ptk = whc_set_ptk;
- wusbhc->set_gtk = whc_set_gtk;
-
- ret = wusbhc_create(wusbhc);
- if (ret)
- goto error_wusbhc_create;
-
- ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED);
- if (ret) {
- dev_err(dev, "cannot add HCD: %d\n", ret);
- goto error_usb_add_hcd;
- }
- device_wakeup_enable(usb_hcd->self.controller);
-
- ret = wusbhc_b_create(wusbhc);
- if (ret) {
- dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret);
- goto error_wusbhc_b_create;
- }
-
- whc_dbg_init(whc);
-
- return 0;
-
-error_wusbhc_b_create:
- usb_remove_hcd(usb_hcd);
-error_usb_add_hcd:
- wusbhc_destroy(wusbhc);
-error_wusbhc_create:
- uwb_rc_put(wusbhc->uwb_rc);
-error_uwb_rc:
- whc_clean_up(whc);
-error_whc_init:
- usb_put_hcd(usb_hcd);
- return ret;
-}
-
-
-static void whc_remove(struct umc_dev *umc)
-{
- struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev);
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- struct whc *whc = wusbhc_to_whc(wusbhc);
-
- if (usb_hcd) {
- whc_dbg_clean_up(whc);
- wusbhc_b_destroy(wusbhc);
- usb_remove_hcd(usb_hcd);
- wusbhc_destroy(wusbhc);
- uwb_rc_put(wusbhc->uwb_rc);
- whc_clean_up(whc);
- usb_put_hcd(usb_hcd);
- }
-}
-
-static struct umc_driver whci_hc_driver = {
- .name = "whci-hcd",
- .cap_id = UMC_CAP_ID_WHCI_WUSB_HC,
- .probe = whc_probe,
- .remove = whc_remove,
-};
-
-static int __init whci_hc_driver_init(void)
-{
- return umc_driver_register(&whci_hc_driver);
-}
-module_init(whci_hc_driver_init);
-
-static void __exit whci_hc_driver_exit(void)
-{
- umc_driver_unregister(&whci_hc_driver);
-}
-module_exit(whci_hc_driver_exit);
-
-/* PCI device ID's that we handle (so it gets loaded) */
-static struct pci_device_id __used whci_hcd_id_table[] = {
- { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
- { /* empty last entry */ }
-};
-MODULE_DEVICE_TABLE(pci, whci_hcd_id_table);
-
-MODULE_DESCRIPTION("WHCI Wireless USB host controller driver");
-MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
-MODULE_LICENSE("GPL");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) hardware access helpers.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-
-#include "../../../uwb/include/umc.h"
-#include "../../wusbhc.h"
-
-#include "whcd.h"
-
-void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val)
-{
- unsigned long flags;
- u32 cmd;
-
- spin_lock_irqsave(&whc->lock, flags);
-
- cmd = le_readl(whc->base + WUSBCMD);
- cmd = (cmd & ~mask) | val;
- le_writel(cmd, whc->base + WUSBCMD);
-
- spin_unlock_irqrestore(&whc->lock, flags);
-}
-
-/**
- * whc_do_gencmd - start a generic command via the WUSBGENCMDSTS register
- * @whc: the WHCI HC
- * @cmd: command to start.
- * @params: parameters for the command (the WUSBGENCMDPARAMS register value).
- * @addr: pointer to any data for the command (may be NULL).
- * @len: length of the data (if any).
- */
-int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len)
-{
- unsigned long flags;
- dma_addr_t dma_addr;
- int t;
- int ret = 0;
-
- mutex_lock(&whc->mutex);
-
- /* Wait for previous command to complete. */
- t = wait_event_timeout(whc->cmd_wq,
- (le_readl(whc->base + WUSBGENCMDSTS) & WUSBGENCMDSTS_ACTIVE) == 0,
- WHC_GENCMD_TIMEOUT_MS);
- if (t == 0) {
- dev_err(&whc->umc->dev, "generic command timeout (%04x/%04x)\n",
- le_readl(whc->base + WUSBGENCMDSTS),
- le_readl(whc->base + WUSBGENCMDPARAMS));
- ret = -ETIMEDOUT;
- goto out;
- }
-
- if (addr) {
- memcpy(whc->gen_cmd_buf, addr, len);
- dma_addr = whc->gen_cmd_buf_dma;
- } else
- dma_addr = 0;
-
- /* Poke registers to start cmd. */
- spin_lock_irqsave(&whc->lock, flags);
-
- le_writel(params, whc->base + WUSBGENCMDPARAMS);
- le_writeq(dma_addr, whc->base + WUSBGENADDR);
-
- le_writel(WUSBGENCMDSTS_ACTIVE | WUSBGENCMDSTS_IOC | cmd,
- whc->base + WUSBGENCMDSTS);
-
- spin_unlock_irqrestore(&whc->lock, flags);
-out:
- mutex_unlock(&whc->mutex);
-
- return ret;
-}
-
-/**
- * whc_hw_error - recover from a hardware error
- * @whc: the WHCI HC that broke.
- * @reason: a description of the failure.
- *
- * Recover from broken hardware with a full reset.
- */
-void whc_hw_error(struct whc *whc, const char *reason)
-{
- struct wusbhc *wusbhc = &whc->wusbhc;
-
- dev_err(&whc->umc->dev, "hardware error: %s\n", reason);
- wusbhc_reset_all(wusbhc);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) initialization.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/dma-mapping.h>
-
-#include "../../../uwb/include/umc.h"
-#include "../../wusbhc.h"
-
-#include "whcd.h"
-
-/*
- * Reset the host controller.
- */
-static void whc_hw_reset(struct whc *whc)
-{
- le_writel(WUSBCMD_WHCRESET, whc->base + WUSBCMD);
- whci_wait_for(&whc->umc->dev, whc->base + WUSBCMD, WUSBCMD_WHCRESET, 0,
- 100, "reset");
-}
-
-static void whc_hw_init_di_buf(struct whc *whc)
-{
- int d;
-
- /* Disable all entries in the Device Information buffer. */
- for (d = 0; d < whc->n_devices; d++)
- whc->di_buf[d].addr_sec_info = WHC_DI_DISABLE;
-
- le_writeq(whc->di_buf_dma, whc->base + WUSBDEVICEINFOADDR);
-}
-
-static void whc_hw_init_dn_buf(struct whc *whc)
-{
- /* Clear the Device Notification buffer to ensure the V (valid)
- * bits are clear. */
- memset(whc->dn_buf, 0, 4096);
-
- le_writeq(whc->dn_buf_dma, whc->base + WUSBDNTSBUFADDR);
-}
-
-int whc_init(struct whc *whc)
-{
- u32 whcsparams;
- int ret, i;
- resource_size_t start, len;
-
- spin_lock_init(&whc->lock);
- mutex_init(&whc->mutex);
- init_waitqueue_head(&whc->cmd_wq);
- init_waitqueue_head(&whc->async_list_wq);
- init_waitqueue_head(&whc->periodic_list_wq);
- whc->workqueue = alloc_ordered_workqueue(dev_name(&whc->umc->dev), 0);
- if (whc->workqueue == NULL) {
- ret = -ENOMEM;
- goto error;
- }
- INIT_WORK(&whc->dn_work, whc_dn_work);
-
- INIT_WORK(&whc->async_work, scan_async_work);
- INIT_LIST_HEAD(&whc->async_list);
- INIT_LIST_HEAD(&whc->async_removed_list);
-
- INIT_WORK(&whc->periodic_work, scan_periodic_work);
- for (i = 0; i < 5; i++)
- INIT_LIST_HEAD(&whc->periodic_list[i]);
- INIT_LIST_HEAD(&whc->periodic_removed_list);
-
- /* Map HC registers. */
- start = whc->umc->resource.start;
- len = whc->umc->resource.end - start + 1;
- if (!request_mem_region(start, len, "whci-hc")) {
- dev_err(&whc->umc->dev, "can't request HC region\n");
- ret = -EBUSY;
- goto error;
- }
- whc->base_phys = start;
- whc->base = ioremap(start, len);
- if (!whc->base) {
- dev_err(&whc->umc->dev, "ioremap\n");
- ret = -ENOMEM;
- goto error;
- }
-
- whc_hw_reset(whc);
-
- /* Read maximum number of devices, keys and MMC IEs. */
- whcsparams = le_readl(whc->base + WHCSPARAMS);
- whc->n_devices = WHCSPARAMS_TO_N_DEVICES(whcsparams);
- whc->n_keys = WHCSPARAMS_TO_N_KEYS(whcsparams);
- whc->n_mmc_ies = WHCSPARAMS_TO_N_MMC_IES(whcsparams);
-
- dev_dbg(&whc->umc->dev, "N_DEVICES = %d, N_KEYS = %d, N_MMC_IES = %d\n",
- whc->n_devices, whc->n_keys, whc->n_mmc_ies);
-
- whc->qset_pool = dma_pool_create("qset", &whc->umc->dev,
- sizeof(struct whc_qset), 64, 0);
- if (whc->qset_pool == NULL) {
- ret = -ENOMEM;
- goto error;
- }
-
- ret = asl_init(whc);
- if (ret < 0)
- goto error;
- ret = pzl_init(whc);
- if (ret < 0)
- goto error;
-
- /* Allocate and initialize a buffer for generic commands, the
- Device Information buffer, and the Device Notification
- buffer. */
-
- whc->gen_cmd_buf = dma_alloc_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN,
- &whc->gen_cmd_buf_dma, GFP_KERNEL);
- if (whc->gen_cmd_buf == NULL) {
- ret = -ENOMEM;
- goto error;
- }
-
- whc->dn_buf = dma_alloc_coherent(&whc->umc->dev,
- sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES,
- &whc->dn_buf_dma, GFP_KERNEL);
- if (!whc->dn_buf) {
- ret = -ENOMEM;
- goto error;
- }
- whc_hw_init_dn_buf(whc);
-
- whc->di_buf = dma_alloc_coherent(&whc->umc->dev,
- sizeof(struct di_buf_entry) * whc->n_devices,
- &whc->di_buf_dma, GFP_KERNEL);
- if (!whc->di_buf) {
- ret = -ENOMEM;
- goto error;
- }
- whc_hw_init_di_buf(whc);
-
- return 0;
-
-error:
- whc_clean_up(whc);
- return ret;
-}
-
-void whc_clean_up(struct whc *whc)
-{
- resource_size_t len;
-
- if (whc->di_buf)
- dma_free_coherent(&whc->umc->dev, sizeof(struct di_buf_entry) * whc->n_devices,
- whc->di_buf, whc->di_buf_dma);
- if (whc->dn_buf)
- dma_free_coherent(&whc->umc->dev, sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES,
- whc->dn_buf, whc->dn_buf_dma);
- if (whc->gen_cmd_buf)
- dma_free_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN,
- whc->gen_cmd_buf, whc->gen_cmd_buf_dma);
-
- pzl_clean_up(whc);
- asl_clean_up(whc);
-
- dma_pool_destroy(whc->qset_pool);
-
- len = resource_size(&whc->umc->resource);
- if (whc->base)
- iounmap(whc->base);
- if (whc->base_phys)
- release_mem_region(whc->base_phys, len);
-
- if (whc->workqueue)
- destroy_workqueue(whc->workqueue);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) interrupt handling.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-
-#include "../../../uwb/include/umc.h"
-#include "../../wusbhc.h"
-
-#include "whcd.h"
-
-static void transfer_done(struct whc *whc)
-{
- queue_work(whc->workqueue, &whc->async_work);
- queue_work(whc->workqueue, &whc->periodic_work);
-}
-
-irqreturn_t whc_int_handler(struct usb_hcd *hcd)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(hcd);
- struct whc *whc = wusbhc_to_whc(wusbhc);
- u32 sts;
-
- sts = le_readl(whc->base + WUSBSTS);
- if (!(sts & WUSBSTS_INT_MASK))
- return IRQ_NONE;
- le_writel(sts & WUSBSTS_INT_MASK, whc->base + WUSBSTS);
-
- if (sts & WUSBSTS_GEN_CMD_DONE)
- wake_up(&whc->cmd_wq);
-
- if (sts & WUSBSTS_HOST_ERR)
- dev_err(&whc->umc->dev, "FIXME: host system error\n");
-
- if (sts & WUSBSTS_ASYNC_SCHED_SYNCED)
- wake_up(&whc->async_list_wq);
-
- if (sts & WUSBSTS_PERIODIC_SCHED_SYNCED)
- wake_up(&whc->periodic_list_wq);
-
- if (sts & WUSBSTS_DNTS_INT)
- queue_work(whc->workqueue, &whc->dn_work);
-
- /*
- * A transfer completed (see [WHCI] section 4.7.1.2 for when
- * this occurs).
- */
- if (sts & (WUSBSTS_INT | WUSBSTS_ERR_INT))
- transfer_done(whc);
-
- return IRQ_HANDLED;
-}
-
-static int process_dn_buf(struct whc *whc)
-{
- struct wusbhc *wusbhc = &whc->wusbhc;
- struct dn_buf_entry *dn;
- int processed = 0;
-
- for (dn = whc->dn_buf; dn < whc->dn_buf + WHC_N_DN_ENTRIES; dn++) {
- if (dn->status & WHC_DN_STATUS_VALID) {
- wusbhc_handle_dn(wusbhc, dn->src_addr,
- (struct wusb_dn_hdr *)dn->dn_data,
- dn->msg_size);
- dn->status &= ~WHC_DN_STATUS_VALID;
- processed++;
- }
- }
- return processed;
-}
-
-void whc_dn_work(struct work_struct *work)
-{
- struct whc *whc = container_of(work, struct whc, dn_work);
- int processed;
-
- do {
- processed = process_dn_buf(whc);
- } while (processed);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) periodic schedule management.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/dma-mapping.h>
-#include <linux/usb.h>
-
-#include "../../../uwb/include/umc.h"
-#include "../../wusbhc.h"
-
-#include "whcd.h"
-
-static void update_pzl_pointers(struct whc *whc, int period, u64 addr)
-{
- switch (period) {
- case 0:
- whc_qset_set_link_ptr(&whc->pz_list[0], addr);
- whc_qset_set_link_ptr(&whc->pz_list[2], addr);
- whc_qset_set_link_ptr(&whc->pz_list[4], addr);
- whc_qset_set_link_ptr(&whc->pz_list[6], addr);
- whc_qset_set_link_ptr(&whc->pz_list[8], addr);
- whc_qset_set_link_ptr(&whc->pz_list[10], addr);
- whc_qset_set_link_ptr(&whc->pz_list[12], addr);
- whc_qset_set_link_ptr(&whc->pz_list[14], addr);
- break;
- case 1:
- whc_qset_set_link_ptr(&whc->pz_list[1], addr);
- whc_qset_set_link_ptr(&whc->pz_list[5], addr);
- whc_qset_set_link_ptr(&whc->pz_list[9], addr);
- whc_qset_set_link_ptr(&whc->pz_list[13], addr);
- break;
- case 2:
- whc_qset_set_link_ptr(&whc->pz_list[3], addr);
- whc_qset_set_link_ptr(&whc->pz_list[11], addr);
- break;
- case 3:
- whc_qset_set_link_ptr(&whc->pz_list[7], addr);
- break;
- case 4:
- whc_qset_set_link_ptr(&whc->pz_list[15], addr);
- break;
- }
-}
-
-/*
- * Return the 'period' to use for this qset. The minimum interval for
- * the endpoint is used so whatever urbs are submitted the device is
- * polled often enough.
- */
-static int qset_get_period(struct whc *whc, struct whc_qset *qset)
-{
- uint8_t bInterval = qset->ep->desc.bInterval;
-
- if (bInterval < 6)
- bInterval = 6;
- if (bInterval > 10)
- bInterval = 10;
- return bInterval - 6;
-}
-
-static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset)
-{
- int period;
-
- period = qset_get_period(whc, qset);
-
- qset_clear(whc, qset);
- list_move(&qset->list_node, &whc->periodic_list[period]);
- qset->in_sw_list = true;
-}
-
-static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset)
-{
- list_move(&qset->list_node, &whc->periodic_removed_list);
- qset->in_hw_list = false;
- qset->in_sw_list = false;
-}
-
-/**
- * pzl_process_qset - process any recently inactivated or halted qTDs
- * in a qset.
- *
- * After inactive qTDs are removed, new qTDs can be added if the
- * urb queue still contains URBs.
- *
- * Returns the schedule updates required.
- */
-static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset)
-{
- enum whc_update update = 0;
- uint32_t status = 0;
-
- while (qset->ntds) {
- struct whc_qtd *td;
-
- td = &qset->qtd[qset->td_start];
- status = le32_to_cpu(td->status);
-
- /*
- * Nothing to do with a still active qTD.
- */
- if (status & QTD_STS_ACTIVE)
- break;
-
- if (status & QTD_STS_HALTED) {
- /* Ug, an error. */
- process_halted_qtd(whc, qset, td);
- /* A halted qTD always triggers an update
- because the qset was either removed or
- reactivated. */
- update |= WHC_UPDATE_UPDATED;
- goto done;
- }
-
- /* Mmm, a completed qTD. */
- process_inactive_qtd(whc, qset, td);
- }
-
- if (!qset->remove)
- update |= qset_add_qtds(whc, qset);
-
-done:
- /*
- * If there are no qTDs in this qset, remove it from the PZL.
- */
- if (qset->remove && qset->ntds == 0) {
- pzl_qset_remove(whc, qset);
- update |= WHC_UPDATE_REMOVED;
- }
-
- return update;
-}
-
-/**
- * pzl_start - start the periodic schedule
- * @whc: the WHCI host controller
- *
- * The PZL must be valid (e.g., all entries in the list should have
- * the T bit set).
- */
-void pzl_start(struct whc *whc)
-{
- le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE);
-
- whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN);
- whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
- WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED,
- 1000, "start PZL");
-}
-
-/**
- * pzl_stop - stop the periodic schedule
- * @whc: the WHCI host controller
- */
-void pzl_stop(struct whc *whc)
-{
- whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0);
- whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
- WUSBSTS_PERIODIC_SCHED, 0,
- 1000, "stop PZL");
-}
-
-/**
- * pzl_update - request a PZL update and wait for the hardware to be synced
- * @whc: the WHCI HC
- * @wusbcmd: WUSBCMD value to start the update.
- *
- * If the WUSB HC is inactive (i.e., the PZL is stopped) then the
- * update must be skipped as the hardware may not respond to update
- * requests.
- */
-void pzl_update(struct whc *whc, uint32_t wusbcmd)
-{
- struct wusbhc *wusbhc = &whc->wusbhc;
- long t;
-
- mutex_lock(&wusbhc->mutex);
- if (wusbhc->active) {
- whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
- t = wait_event_timeout(
- whc->periodic_list_wq,
- (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0,
- msecs_to_jiffies(1000));
- if (t == 0)
- whc_hw_error(whc, "PZL update timeout");
- }
- mutex_unlock(&wusbhc->mutex);
-}
-
-static void update_pzl_hw_view(struct whc *whc)
-{
- struct whc_qset *qset, *t;
- int period;
- u64 tmp_qh = 0;
-
- for (period = 0; period < 5; period++) {
- list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) {
- whc_qset_set_link_ptr(&qset->qh.link, tmp_qh);
- tmp_qh = qset->qset_dma;
- qset->in_hw_list = true;
- }
- update_pzl_pointers(whc, period, tmp_qh);
- }
-}
-
-/**
- * scan_periodic_work - scan the PZL for qsets to process.
- *
- * Process each qset in the PZL in turn and then signal the WHC that
- * the PZL has been updated.
- *
- * Then start, stop or update the periodic schedule as required.
- */
-void scan_periodic_work(struct work_struct *work)
-{
- struct whc *whc = container_of(work, struct whc, periodic_work);
- struct whc_qset *qset, *t;
- enum whc_update update = 0;
- int period;
-
- spin_lock_irq(&whc->lock);
-
- for (period = 4; period >= 0; period--) {
- list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) {
- if (!qset->in_hw_list)
- update |= WHC_UPDATE_ADDED;
- update |= pzl_process_qset(whc, qset);
- }
- }
-
- if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED))
- update_pzl_hw_view(whc);
-
- spin_unlock_irq(&whc->lock);
-
- if (update) {
- uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB;
- if (update & WHC_UPDATE_REMOVED)
- wusbcmd |= WUSBCMD_PERIODIC_QSET_RM;
- pzl_update(whc, wusbcmd);
- }
-
- /*
- * Now that the PZL is updated, complete the removal of any
- * removed qsets.
- *
- * If the qset was to be reset, do so and reinsert it into the
- * PZL if it has pending transfers.
- */
- spin_lock_irq(&whc->lock);
-
- list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) {
- qset_remove_complete(whc, qset);
- if (qset->reset) {
- qset_reset(whc, qset);
- if (!list_empty(&qset->stds)) {
- qset_insert_in_sw_list(whc, qset);
- queue_work(whc->workqueue, &whc->periodic_work);
- }
- }
- }
-
- spin_unlock_irq(&whc->lock);
-}
-
-/**
- * pzl_urb_enqueue - queue an URB onto the periodic list (PZL)
- * @whc: the WHCI host controller
- * @urb: the URB to enqueue
- * @mem_flags: flags for any memory allocations
- *
- * The qset for the endpoint is obtained and the urb queued on to it.
- *
- * Work is scheduled to update the hardware's view of the PZL.
- */
-int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
-{
- struct whc_qset *qset;
- int err;
- unsigned long flags;
-
- spin_lock_irqsave(&whc->lock, flags);
-
- err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
- if (err < 0) {
- spin_unlock_irqrestore(&whc->lock, flags);
- return err;
- }
-
- qset = get_qset(whc, urb, GFP_ATOMIC);
- if (qset == NULL)
- err = -ENOMEM;
- else
- err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
- if (!err) {
- if (!qset->in_sw_list && !qset->remove)
- qset_insert_in_sw_list(whc, qset);
- } else
- usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
-
- spin_unlock_irqrestore(&whc->lock, flags);
-
- if (!err)
- queue_work(whc->workqueue, &whc->periodic_work);
-
- return err;
-}
-
-/**
- * pzl_urb_dequeue - remove an URB (qset) from the periodic list
- * @whc: the WHCI host controller
- * @urb: the URB to dequeue
- * @status: the current status of the URB
- *
- * URBs that do yet have qTDs can simply be removed from the software
- * queue, otherwise the qset must be removed so the qTDs can be safely
- * removed.
- */
-int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
-{
- struct whc_urb *wurb = urb->hcpriv;
- struct whc_qset *qset = wurb->qset;
- struct whc_std *std, *t;
- bool has_qtd = false;
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&whc->lock, flags);
-
- ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status);
- if (ret < 0)
- goto out;
-
- list_for_each_entry_safe(std, t, &qset->stds, list_node) {
- if (std->urb == urb) {
- if (std->qtd)
- has_qtd = true;
- qset_free_std(whc, std);
- } else
- std->qtd = NULL; /* so this std is re-added when the qset is */
- }
-
- if (has_qtd) {
- pzl_qset_remove(whc, qset);
- update_pzl_hw_view(whc);
- wurb->status = status;
- wurb->is_async = false;
- queue_work(whc->workqueue, &wurb->dequeue_work);
- } else
- qset_remove_urb(whc, qset, urb, status);
-out:
- spin_unlock_irqrestore(&whc->lock, flags);
-
- return ret;
-}
-
-/**
- * pzl_qset_delete - delete a qset from the PZL
- */
-void pzl_qset_delete(struct whc *whc, struct whc_qset *qset)
-{
- qset->remove = 1;
- queue_work(whc->workqueue, &whc->periodic_work);
- qset_delete(whc, qset);
-}
-
-/**
- * pzl_init - initialize the periodic zone list
- * @whc: the WHCI host controller
- */
-int pzl_init(struct whc *whc)
-{
- int i;
-
- whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16,
- &whc->pz_list_dma, GFP_KERNEL);
- if (whc->pz_list == NULL)
- return -ENOMEM;
-
- /* Set T bit on all elements in PZL. */
- for (i = 0; i < 16; i++)
- whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T);
-
- le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE);
-
- return 0;
-}
-
-/**
- * pzl_clean_up - free PZL resources
- * @whc: the WHCI host controller
- *
- * The PZL is stopped and empty.
- */
-void pzl_clean_up(struct whc *whc)
-{
- if (whc->pz_list)
- dma_free_coherent(&whc->umc->dev, sizeof(u64) * 16, whc->pz_list,
- whc->pz_list_dma);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) qset management.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-
-#include "../../../uwb/include/umc.h"
-#include "../../wusbhc.h"
-
-#include "whcd.h"
-
-struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags)
-{
- struct whc_qset *qset;
- dma_addr_t dma;
-
- qset = dma_pool_zalloc(whc->qset_pool, mem_flags, &dma);
- if (qset == NULL)
- return NULL;
-
- qset->qset_dma = dma;
- qset->whc = whc;
-
- INIT_LIST_HEAD(&qset->list_node);
- INIT_LIST_HEAD(&qset->stds);
-
- return qset;
-}
-
-/**
- * qset_fill_qh - fill the static endpoint state in a qset's QHead
- * @qset: the qset whose QH needs initializing with static endpoint
- * state
- * @urb: an urb for a transfer to this endpoint
- */
-static void qset_fill_qh(struct whc *whc, struct whc_qset *qset, struct urb *urb)
-{
- struct usb_device *usb_dev = urb->dev;
- struct wusb_dev *wusb_dev = usb_dev->wusb_dev;
- struct usb_wireless_ep_comp_descriptor *epcd;
- bool is_out;
- uint8_t phy_rate;
-
- is_out = usb_pipeout(urb->pipe);
-
- qset->max_packet = le16_to_cpu(urb->ep->desc.wMaxPacketSize);
-
- epcd = (struct usb_wireless_ep_comp_descriptor *)qset->ep->extra;
- if (epcd) {
- qset->max_seq = epcd->bMaxSequence;
- qset->max_burst = epcd->bMaxBurst;
- } else {
- qset->max_seq = 2;
- qset->max_burst = 1;
- }
-
- /*
- * Initial PHY rate is 53.3 Mbit/s for control endpoints or
- * the maximum supported by the device for other endpoints
- * (unless limited by the user).
- */
- if (usb_pipecontrol(urb->pipe))
- phy_rate = UWB_PHY_RATE_53;
- else {
- uint16_t phy_rates;
-
- phy_rates = le16_to_cpu(wusb_dev->wusb_cap_descr->wPHYRates);
- phy_rate = fls(phy_rates) - 1;
- if (phy_rate > whc->wusbhc.phy_rate)
- phy_rate = whc->wusbhc.phy_rate;
- }
-
- qset->qh.info1 = cpu_to_le32(
- QH_INFO1_EP(usb_pipeendpoint(urb->pipe))
- | (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN)
- | usb_pipe_to_qh_type(urb->pipe)
- | QH_INFO1_DEV_INFO_IDX(wusb_port_no_to_idx(usb_dev->portnum))
- | QH_INFO1_MAX_PKT_LEN(qset->max_packet)
- );
- qset->qh.info2 = cpu_to_le32(
- QH_INFO2_BURST(qset->max_burst)
- | QH_INFO2_DBP(0)
- | QH_INFO2_MAX_COUNT(3)
- | QH_INFO2_MAX_RETRY(3)
- | QH_INFO2_MAX_SEQ(qset->max_seq - 1)
- );
- /* FIXME: where can we obtain these Tx parameters from? Why
- * doesn't the chip know what Tx power to use? It knows the Rx
- * strength and can presumably guess the Tx power required
- * from that? */
- qset->qh.info3 = cpu_to_le32(
- QH_INFO3_TX_RATE(phy_rate)
- | QH_INFO3_TX_PWR(0) /* 0 == max power */
- );
-
- qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
-}
-
-/**
- * qset_clear - clear fields in a qset so it may be reinserted into a
- * schedule.
- *
- * The sequence number and current window are not cleared (see
- * qset_reset()).
- */
-void qset_clear(struct whc *whc, struct whc_qset *qset)
-{
- qset->td_start = qset->td_end = qset->ntds = 0;
-
- qset->qh.link = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T);
- qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
- qset->qh.err_count = 0;
- qset->qh.scratch[0] = 0;
- qset->qh.scratch[1] = 0;
- qset->qh.scratch[2] = 0;
-
- memset(&qset->qh.overlay, 0, sizeof(qset->qh.overlay));
-
- init_completion(&qset->remove_complete);
-}
-
-/**
- * qset_reset - reset endpoint state in a qset.
- *
- * Clears the sequence number and current window. This qset must not
- * be in the ASL or PZL.
- */
-void qset_reset(struct whc *whc, struct whc_qset *qset)
-{
- qset->reset = 0;
-
- qset->qh.status &= ~QH_STATUS_SEQ_MASK;
- qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
-}
-
-/**
- * get_qset - get the qset for an async endpoint
- *
- * A new qset is created if one does not already exist.
- */
-struct whc_qset *get_qset(struct whc *whc, struct urb *urb,
- gfp_t mem_flags)
-{
- struct whc_qset *qset;
-
- qset = urb->ep->hcpriv;
- if (qset == NULL) {
- qset = qset_alloc(whc, mem_flags);
- if (qset == NULL)
- return NULL;
-
- qset->ep = urb->ep;
- urb->ep->hcpriv = qset;
- qset_fill_qh(whc, qset, urb);
- }
- return qset;
-}
-
-void qset_remove_complete(struct whc *whc, struct whc_qset *qset)
-{
- qset->remove = 0;
- list_del_init(&qset->list_node);
- complete(&qset->remove_complete);
-}
-
-/**
- * qset_add_qtds - add qTDs for an URB to a qset
- *
- * Returns true if the list (ASL/PZL) must be updated because (for a
- * WHCI 0.95 controller) an activated qTD was pointed to be iCur.
- */
-enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset)
-{
- struct whc_std *std;
- enum whc_update update = 0;
-
- list_for_each_entry(std, &qset->stds, list_node) {
- struct whc_qtd *qtd;
- uint32_t status;
-
- if (qset->ntds >= WHCI_QSET_TD_MAX
- || (qset->pause_after_urb && std->urb != qset->pause_after_urb))
- break;
-
- if (std->qtd)
- continue; /* already has a qTD */
-
- qtd = std->qtd = &qset->qtd[qset->td_end];
-
- /* Fill in setup bytes for control transfers. */
- if (usb_pipecontrol(std->urb->pipe))
- memcpy(qtd->setup, std->urb->setup_packet, 8);
-
- status = QTD_STS_ACTIVE | QTD_STS_LEN(std->len);
-
- if (whc_std_last(std) && usb_pipeout(std->urb->pipe))
- status |= QTD_STS_LAST_PKT;
-
- /*
- * For an IN transfer the iAlt field should be set so
- * the h/w will automatically advance to the next
- * transfer. However, if there are 8 or more TDs
- * remaining in this transfer then iAlt cannot be set
- * as it could point to somewhere in this transfer.
- */
- if (std->ntds_remaining < WHCI_QSET_TD_MAX) {
- int ialt;
- ialt = (qset->td_end + std->ntds_remaining) % WHCI_QSET_TD_MAX;
- status |= QTD_STS_IALT(ialt);
- } else if (usb_pipein(std->urb->pipe))
- qset->pause_after_urb = std->urb;
-
- if (std->num_pointers)
- qtd->options = cpu_to_le32(QTD_OPT_IOC);
- else
- qtd->options = cpu_to_le32(QTD_OPT_IOC | QTD_OPT_SMALL);
- qtd->page_list_ptr = cpu_to_le64(std->dma_addr);
-
- qtd->status = cpu_to_le32(status);
-
- if (QH_STATUS_TO_ICUR(qset->qh.status) == qset->td_end)
- update = WHC_UPDATE_UPDATED;
-
- if (++qset->td_end >= WHCI_QSET_TD_MAX)
- qset->td_end = 0;
- qset->ntds++;
- }
-
- return update;
-}
-
-/**
- * qset_remove_qtd - remove the first qTD from a qset.
- *
- * The qTD might be still active (if it's part of a IN URB that
- * resulted in a short read) so ensure it's deactivated.
- */
-static void qset_remove_qtd(struct whc *whc, struct whc_qset *qset)
-{
- qset->qtd[qset->td_start].status = 0;
-
- if (++qset->td_start >= WHCI_QSET_TD_MAX)
- qset->td_start = 0;
- qset->ntds--;
-}
-
-static void qset_copy_bounce_to_sg(struct whc *whc, struct whc_std *std)
-{
- struct scatterlist *sg;
- void *bounce;
- size_t remaining, offset;
-
- bounce = std->bounce_buf;
- remaining = std->len;
-
- sg = std->bounce_sg;
- offset = std->bounce_offset;
-
- while (remaining) {
- size_t len;
-
- len = min(sg->length - offset, remaining);
- memcpy(sg_virt(sg) + offset, bounce, len);
-
- bounce += len;
- remaining -= len;
-
- offset += len;
- if (offset >= sg->length) {
- sg = sg_next(sg);
- offset = 0;
- }
- }
-
-}
-
-/**
- * qset_free_std - remove an sTD and free it.
- * @whc: the WHCI host controller
- * @std: the sTD to remove and free.
- */
-void qset_free_std(struct whc *whc, struct whc_std *std)
-{
- list_del(&std->list_node);
- if (std->bounce_buf) {
- bool is_out = usb_pipeout(std->urb->pipe);
- dma_addr_t dma_addr;
-
- if (std->num_pointers)
- dma_addr = le64_to_cpu(std->pl_virt[0].buf_ptr);
- else
- dma_addr = std->dma_addr;
-
- dma_unmap_single(whc->wusbhc.dev, dma_addr,
- std->len, is_out ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
- if (!is_out)
- qset_copy_bounce_to_sg(whc, std);
- kfree(std->bounce_buf);
- }
- if (std->pl_virt) {
- if (!dma_mapping_error(whc->wusbhc.dev, std->dma_addr))
- dma_unmap_single(whc->wusbhc.dev, std->dma_addr,
- std->num_pointers * sizeof(struct whc_page_list_entry),
- DMA_TO_DEVICE);
- kfree(std->pl_virt);
- std->pl_virt = NULL;
- }
- kfree(std);
-}
-
-/**
- * qset_remove_qtds - remove an URB's qTDs (and sTDs).
- */
-static void qset_remove_qtds(struct whc *whc, struct whc_qset *qset,
- struct urb *urb)
-{
- struct whc_std *std, *t;
-
- list_for_each_entry_safe(std, t, &qset->stds, list_node) {
- if (std->urb != urb)
- break;
- if (std->qtd != NULL)
- qset_remove_qtd(whc, qset);
- qset_free_std(whc, std);
- }
-}
-
-/**
- * qset_free_stds - free any remaining sTDs for an URB.
- */
-static void qset_free_stds(struct whc_qset *qset, struct urb *urb)
-{
- struct whc_std *std, *t;
-
- list_for_each_entry_safe(std, t, &qset->stds, list_node) {
- if (std->urb == urb)
- qset_free_std(qset->whc, std);
- }
-}
-
-static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_flags)
-{
- dma_addr_t dma_addr = std->dma_addr;
- dma_addr_t sp, ep;
- size_t pl_len;
- int p;
-
- /* Short buffers don't need a page list. */
- if (std->len <= WHCI_PAGE_SIZE) {
- std->num_pointers = 0;
- return 0;
- }
-
- sp = dma_addr & ~(WHCI_PAGE_SIZE-1);
- ep = dma_addr + std->len;
- std->num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE);
-
- pl_len = std->num_pointers * sizeof(struct whc_page_list_entry);
- std->pl_virt = kmalloc(pl_len, mem_flags);
- if (std->pl_virt == NULL)
- return -ENOMEM;
- std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE);
- if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) {
- kfree(std->pl_virt);
- return -EFAULT;
- }
-
- for (p = 0; p < std->num_pointers; p++) {
- std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr);
- dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1);
- }
-
- return 0;
-}
-
-/**
- * urb_dequeue_work - executes asl/pzl update and gives back the urb to the system.
- */
-static void urb_dequeue_work(struct work_struct *work)
-{
- struct whc_urb *wurb = container_of(work, struct whc_urb, dequeue_work);
- struct whc_qset *qset = wurb->qset;
- struct whc *whc = qset->whc;
- unsigned long flags;
-
- if (wurb->is_async)
- asl_update(whc, WUSBCMD_ASYNC_UPDATED
- | WUSBCMD_ASYNC_SYNCED_DB
- | WUSBCMD_ASYNC_QSET_RM);
- else
- pzl_update(whc, WUSBCMD_PERIODIC_UPDATED
- | WUSBCMD_PERIODIC_SYNCED_DB
- | WUSBCMD_PERIODIC_QSET_RM);
-
- spin_lock_irqsave(&whc->lock, flags);
- qset_remove_urb(whc, qset, wurb->urb, wurb->status);
- spin_unlock_irqrestore(&whc->lock, flags);
-}
-
-static struct whc_std *qset_new_std(struct whc *whc, struct whc_qset *qset,
- struct urb *urb, gfp_t mem_flags)
-{
- struct whc_std *std;
-
- std = kzalloc(sizeof(struct whc_std), mem_flags);
- if (std == NULL)
- return NULL;
-
- std->urb = urb;
- std->qtd = NULL;
-
- INIT_LIST_HEAD(&std->list_node);
- list_add_tail(&std->list_node, &qset->stds);
-
- return std;
-}
-
-static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *urb,
- gfp_t mem_flags)
-{
- size_t remaining;
- struct scatterlist *sg;
- int i;
- int ntds = 0;
- struct whc_std *std = NULL;
- struct whc_page_list_entry *new_pl_virt;
- dma_addr_t prev_end = 0;
- size_t pl_len;
- int p = 0;
-
- remaining = urb->transfer_buffer_length;
-
- for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
- dma_addr_t dma_addr;
- size_t dma_remaining;
- dma_addr_t sp, ep;
- int num_pointers;
-
- if (remaining == 0) {
- break;
- }
-
- dma_addr = sg_dma_address(sg);
- dma_remaining = min_t(size_t, sg_dma_len(sg), remaining);
-
- while (dma_remaining) {
- size_t dma_len;
-
- /*
- * We can use the previous std (if it exists) provided that:
- * - the previous one ended on a page boundary.
- * - the current one begins on a page boundary.
- * - the previous one isn't full.
- *
- * If a new std is needed but the previous one
- * was not a whole number of packets then this
- * sg list cannot be mapped onto multiple
- * qTDs. Return an error and let the caller
- * sort it out.
- */
- if (!std
- || (prev_end & (WHCI_PAGE_SIZE-1))
- || (dma_addr & (WHCI_PAGE_SIZE-1))
- || std->len + WHCI_PAGE_SIZE > QTD_MAX_XFER_SIZE) {
- if (std && std->len % qset->max_packet != 0)
- return -EINVAL;
- std = qset_new_std(whc, qset, urb, mem_flags);
- if (std == NULL) {
- return -ENOMEM;
- }
- ntds++;
- p = 0;
- }
-
- dma_len = dma_remaining;
-
- /*
- * If the remainder of this element doesn't
- * fit in a single qTD, limit the qTD to a
- * whole number of packets. This allows the
- * remainder to go into the next qTD.
- */
- if (std->len + dma_len > QTD_MAX_XFER_SIZE) {
- dma_len = (QTD_MAX_XFER_SIZE / qset->max_packet)
- * qset->max_packet - std->len;
- }
-
- std->len += dma_len;
- std->ntds_remaining = -1; /* filled in later */
-
- sp = dma_addr & ~(WHCI_PAGE_SIZE-1);
- ep = dma_addr + dma_len;
- num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE);
- std->num_pointers += num_pointers;
-
- pl_len = std->num_pointers * sizeof(struct whc_page_list_entry);
-
- new_pl_virt = krealloc(std->pl_virt, pl_len, mem_flags);
- if (new_pl_virt == NULL) {
- kfree(std->pl_virt);
- std->pl_virt = NULL;
- return -ENOMEM;
- }
- std->pl_virt = new_pl_virt;
-
- for (;p < std->num_pointers; p++) {
- std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr);
- dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1);
- }
-
- prev_end = dma_addr = ep;
- dma_remaining -= dma_len;
- remaining -= dma_len;
- }
- }
-
- /* Now the number of stds is know, go back and fill in
- std->ntds_remaining. */
- list_for_each_entry(std, &qset->stds, list_node) {
- if (std->ntds_remaining == -1) {
- pl_len = std->num_pointers * sizeof(struct whc_page_list_entry);
- std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt,
- pl_len, DMA_TO_DEVICE);
- if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr))
- return -EFAULT;
- std->ntds_remaining = ntds--;
- }
- }
- return 0;
-}
-
-/**
- * qset_add_urb_sg_linearize - add an urb with sg list, copying the data
- *
- * If the URB contains an sg list whose elements cannot be directly
- * mapped to qTDs then the data must be transferred via bounce
- * buffers.
- */
-static int qset_add_urb_sg_linearize(struct whc *whc, struct whc_qset *qset,
- struct urb *urb, gfp_t mem_flags)
-{
- bool is_out = usb_pipeout(urb->pipe);
- size_t max_std_len;
- size_t remaining;
- int ntds = 0;
- struct whc_std *std = NULL;
- void *bounce = NULL;
- struct scatterlist *sg;
- int i;
-
- /* limit maximum bounce buffer to 16 * 3.5 KiB ~= 28 k */
- max_std_len = qset->max_burst * qset->max_packet;
-
- remaining = urb->transfer_buffer_length;
-
- for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
- size_t len;
- size_t sg_remaining;
- void *orig;
-
- if (remaining == 0) {
- break;
- }
-
- sg_remaining = min_t(size_t, remaining, sg->length);
- orig = sg_virt(sg);
-
- while (sg_remaining) {
- if (!std || std->len == max_std_len) {
- std = qset_new_std(whc, qset, urb, mem_flags);
- if (std == NULL)
- return -ENOMEM;
- std->bounce_buf = kmalloc(max_std_len, mem_flags);
- if (std->bounce_buf == NULL)
- return -ENOMEM;
- std->bounce_sg = sg;
- std->bounce_offset = orig - sg_virt(sg);
- bounce = std->bounce_buf;
- ntds++;
- }
-
- len = min(sg_remaining, max_std_len - std->len);
-
- if (is_out)
- memcpy(bounce, orig, len);
-
- std->len += len;
- std->ntds_remaining = -1; /* filled in later */
-
- bounce += len;
- orig += len;
- sg_remaining -= len;
- remaining -= len;
- }
- }
-
- /*
- * For each of the new sTDs, map the bounce buffers, create
- * page lists (if necessary), and fill in std->ntds_remaining.
- */
- list_for_each_entry(std, &qset->stds, list_node) {
- if (std->ntds_remaining != -1)
- continue;
-
- std->dma_addr = dma_map_single(&whc->umc->dev, std->bounce_buf, std->len,
- is_out ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
- if (dma_mapping_error(&whc->umc->dev, std->dma_addr))
- return -EFAULT;
-
- if (qset_fill_page_list(whc, std, mem_flags) < 0)
- return -ENOMEM;
-
- std->ntds_remaining = ntds--;
- }
-
- return 0;
-}
-
-/**
- * qset_add_urb - add an urb to the qset's queue.
- *
- * The URB is chopped into sTDs, one for each qTD that will required.
- * At least one qTD (and sTD) is required even if the transfer has no
- * data (e.g., for some control transfers).
- */
-int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
- gfp_t mem_flags)
-{
- struct whc_urb *wurb;
- int remaining = urb->transfer_buffer_length;
- u64 transfer_dma = urb->transfer_dma;
- int ntds_remaining;
- int ret;
-
- wurb = kzalloc(sizeof(struct whc_urb), mem_flags);
- if (wurb == NULL)
- goto err_no_mem;
- urb->hcpriv = wurb;
- wurb->qset = qset;
- wurb->urb = urb;
- INIT_WORK(&wurb->dequeue_work, urb_dequeue_work);
-
- if (urb->num_sgs) {
- ret = qset_add_urb_sg(whc, qset, urb, mem_flags);
- if (ret == -EINVAL) {
- qset_free_stds(qset, urb);
- ret = qset_add_urb_sg_linearize(whc, qset, urb, mem_flags);
- }
- if (ret < 0)
- goto err_no_mem;
- return 0;
- }
-
- ntds_remaining = DIV_ROUND_UP(remaining, QTD_MAX_XFER_SIZE);
- if (ntds_remaining == 0)
- ntds_remaining = 1;
-
- while (ntds_remaining) {
- struct whc_std *std;
- size_t std_len;
-
- std_len = remaining;
- if (std_len > QTD_MAX_XFER_SIZE)
- std_len = QTD_MAX_XFER_SIZE;
-
- std = qset_new_std(whc, qset, urb, mem_flags);
- if (std == NULL)
- goto err_no_mem;
-
- std->dma_addr = transfer_dma;
- std->len = std_len;
- std->ntds_remaining = ntds_remaining;
-
- if (qset_fill_page_list(whc, std, mem_flags) < 0)
- goto err_no_mem;
-
- ntds_remaining--;
- remaining -= std_len;
- transfer_dma += std_len;
- }
-
- return 0;
-
-err_no_mem:
- qset_free_stds(qset, urb);
- return -ENOMEM;
-}
-
-/**
- * qset_remove_urb - remove an URB from the urb queue.
- *
- * The URB is returned to the USB subsystem.
- */
-void qset_remove_urb(struct whc *whc, struct whc_qset *qset,
- struct urb *urb, int status)
-{
- struct wusbhc *wusbhc = &whc->wusbhc;
- struct whc_urb *wurb = urb->hcpriv;
-
- usb_hcd_unlink_urb_from_ep(&wusbhc->usb_hcd, urb);
- /* Drop the lock as urb->complete() may enqueue another urb. */
- spin_unlock(&whc->lock);
- wusbhc_giveback_urb(wusbhc, urb, status);
- spin_lock(&whc->lock);
-
- kfree(wurb);
-}
-
-/**
- * get_urb_status_from_qtd - get the completed urb status from qTD status
- * @urb: completed urb
- * @status: qTD status
- */
-static int get_urb_status_from_qtd(struct urb *urb, u32 status)
-{
- if (status & QTD_STS_HALTED) {
- if (status & QTD_STS_DBE)
- return usb_pipein(urb->pipe) ? -ENOSR : -ECOMM;
- else if (status & QTD_STS_BABBLE)
- return -EOVERFLOW;
- else if (status & QTD_STS_RCE)
- return -ETIME;
- return -EPIPE;
- }
- if (usb_pipein(urb->pipe)
- && (urb->transfer_flags & URB_SHORT_NOT_OK)
- && urb->actual_length < urb->transfer_buffer_length)
- return -EREMOTEIO;
- return 0;
-}
-
-/**
- * process_inactive_qtd - process an inactive (but not halted) qTD.
- *
- * Update the urb with the transfer bytes from the qTD, if the urb is
- * completely transferred or (in the case of an IN only) the LPF is
- * set, then the transfer is complete and the urb should be returned
- * to the system.
- */
-void process_inactive_qtd(struct whc *whc, struct whc_qset *qset,
- struct whc_qtd *qtd)
-{
- struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node);
- struct urb *urb = std->urb;
- uint32_t status;
- bool complete;
-
- status = le32_to_cpu(qtd->status);
-
- urb->actual_length += std->len - QTD_STS_TO_LEN(status);
-
- if (usb_pipein(urb->pipe) && (status & QTD_STS_LAST_PKT))
- complete = true;
- else
- complete = whc_std_last(std);
-
- qset_remove_qtd(whc, qset);
- qset_free_std(whc, std);
-
- /*
- * Transfers for this URB are complete? Then return it to the
- * USB subsystem.
- */
- if (complete) {
- qset_remove_qtds(whc, qset, urb);
- qset_remove_urb(whc, qset, urb, get_urb_status_from_qtd(urb, status));
-
- /*
- * If iAlt isn't valid then the hardware didn't
- * advance iCur. Adjust the start and end pointers to
- * match iCur.
- */
- if (!(status & QTD_STS_IALT_VALID))
- qset->td_start = qset->td_end
- = QH_STATUS_TO_ICUR(le16_to_cpu(qset->qh.status));
- qset->pause_after_urb = NULL;
- }
-}
-
-/**
- * process_halted_qtd - process a qset with a halted qtd
- *
- * Remove all the qTDs for the failed URB and return the failed URB to
- * the USB subsystem. Then remove all other qTDs so the qset can be
- * removed.
- *
- * FIXME: this is the point where rate adaptation can be done. If a
- * transfer failed because it exceeded the maximum number of retries
- * then it could be reactivated with a slower rate without having to
- * remove the qset.
- */
-void process_halted_qtd(struct whc *whc, struct whc_qset *qset,
- struct whc_qtd *qtd)
-{
- struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node);
- struct urb *urb = std->urb;
- int urb_status;
-
- urb_status = get_urb_status_from_qtd(urb, le32_to_cpu(qtd->status));
-
- qset_remove_qtds(whc, qset, urb);
- qset_remove_urb(whc, qset, urb, urb_status);
-
- list_for_each_entry(std, &qset->stds, list_node) {
- if (qset->ntds == 0)
- break;
- qset_remove_qtd(whc, qset);
- std->qtd = NULL;
- }
-
- qset->remove = 1;
-}
-
-void qset_free(struct whc *whc, struct whc_qset *qset)
-{
- dma_pool_free(whc->qset_pool, qset, qset->qset_dma);
-}
-
-/**
- * qset_delete - wait for a qset to be unused, then free it.
- */
-void qset_delete(struct whc *whc, struct whc_qset *qset)
-{
- wait_for_completion(&qset->remove_complete);
- qset_free(whc, qset);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) private header.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#ifndef __WHCD_H
-#define __WHCD_H
-
-#include <linux/workqueue.h>
-
-#include "../../../uwb/include/whci.h"
-#include "../../../uwb/include/umc.h"
-#include "whci-hc.h"
-
-/* Generic command timeout. */
-#define WHC_GENCMD_TIMEOUT_MS 100
-
-struct whc_dbg;
-
-struct whc {
- struct wusbhc wusbhc;
- struct umc_dev *umc;
-
- resource_size_t base_phys;
- void __iomem *base;
- int irq;
-
- u8 n_devices;
- u8 n_keys;
- u8 n_mmc_ies;
-
- u64 *pz_list;
- struct dn_buf_entry *dn_buf;
- struct di_buf_entry *di_buf;
- dma_addr_t pz_list_dma;
- dma_addr_t dn_buf_dma;
- dma_addr_t di_buf_dma;
-
- spinlock_t lock;
- struct mutex mutex;
-
- void * gen_cmd_buf;
- dma_addr_t gen_cmd_buf_dma;
- wait_queue_head_t cmd_wq;
-
- struct workqueue_struct *workqueue;
- struct work_struct dn_work;
-
- struct dma_pool *qset_pool;
-
- struct list_head async_list;
- struct list_head async_removed_list;
- wait_queue_head_t async_list_wq;
- struct work_struct async_work;
-
- struct list_head periodic_list[5];
- struct list_head periodic_removed_list;
- wait_queue_head_t periodic_list_wq;
- struct work_struct periodic_work;
-
- struct whc_dbg *dbg;
-};
-
-#define wusbhc_to_whc(w) (container_of((w), struct whc, wusbhc))
-
-/**
- * struct whc_std - a software TD.
- * @urb: the URB this sTD is for.
- * @offset: start of the URB's data for this TD.
- * @len: the length of data in the associated TD.
- * @ntds_remaining: number of TDs (starting from this one) in this transfer.
- *
- * @bounce_buf: a bounce buffer if the std was from an urb with a sg
- * list that could not be mapped to qTDs directly.
- * @bounce_sg: the first scatterlist element bounce_buf is for.
- * @bounce_offset: the offset into bounce_sg for the start of bounce_buf.
- *
- * Queued URBs may require more TDs than are available in a qset so we
- * use a list of these "software TDs" (sTDs) to hold per-TD data.
- */
-struct whc_std {
- struct urb *urb;
- size_t len;
- int ntds_remaining;
- struct whc_qtd *qtd;
-
- struct list_head list_node;
- int num_pointers;
- dma_addr_t dma_addr;
- struct whc_page_list_entry *pl_virt;
-
- void *bounce_buf;
- struct scatterlist *bounce_sg;
- unsigned bounce_offset;
-};
-
-/**
- * struct whc_urb - per URB host controller structure.
- * @urb: the URB this struct is for.
- * @qset: the qset associated to the URB.
- * @dequeue_work: the work to remove the URB when dequeued.
- * @is_async: the URB belongs to async sheduler or not.
- * @status: the status to be returned when calling wusbhc_giveback_urb.
- */
-struct whc_urb {
- struct urb *urb;
- struct whc_qset *qset;
- struct work_struct dequeue_work;
- bool is_async;
- int status;
-};
-
-/**
- * whc_std_last - is this sTD the URB's last?
- * @std: the sTD to check.
- */
-static inline bool whc_std_last(struct whc_std *std)
-{
- return std->ntds_remaining <= 1;
-}
-
-enum whc_update {
- WHC_UPDATE_ADDED = 0x01,
- WHC_UPDATE_REMOVED = 0x02,
- WHC_UPDATE_UPDATED = 0x04,
-};
-
-/* init.c */
-int whc_init(struct whc *whc);
-void whc_clean_up(struct whc *whc);
-
-/* hw.c */
-void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val);
-int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len);
-void whc_hw_error(struct whc *whc, const char *reason);
-
-/* wusb.c */
-int whc_wusbhc_start(struct wusbhc *wusbhc);
-void whc_wusbhc_stop(struct wusbhc *wusbhc, int delay);
-int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
- u8 handle, struct wuie_hdr *wuie);
-int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle);
-int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm);
-int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev);
-int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots);
-int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
- const void *ptk, size_t key_size);
-int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid,
- const void *gtk, size_t key_size);
-int whc_set_cluster_id(struct whc *whc, u8 bcid);
-
-/* int.c */
-irqreturn_t whc_int_handler(struct usb_hcd *hcd);
-void whc_dn_work(struct work_struct *work);
-
-/* asl.c */
-void asl_start(struct whc *whc);
-void asl_stop(struct whc *whc);
-int asl_init(struct whc *whc);
-void asl_clean_up(struct whc *whc);
-int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags);
-int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status);
-void asl_qset_delete(struct whc *whc, struct whc_qset *qset);
-void scan_async_work(struct work_struct *work);
-
-/* pzl.c */
-int pzl_init(struct whc *whc);
-void pzl_clean_up(struct whc *whc);
-void pzl_start(struct whc *whc);
-void pzl_stop(struct whc *whc);
-int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags);
-int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status);
-void pzl_qset_delete(struct whc *whc, struct whc_qset *qset);
-void scan_periodic_work(struct work_struct *work);
-
-/* qset.c */
-struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags);
-void qset_free(struct whc *whc, struct whc_qset *qset);
-struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags);
-void qset_delete(struct whc *whc, struct whc_qset *qset);
-void qset_clear(struct whc *whc, struct whc_qset *qset);
-void qset_reset(struct whc *whc, struct whc_qset *qset);
-int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
- gfp_t mem_flags);
-void qset_free_std(struct whc *whc, struct whc_std *std);
-void qset_remove_urb(struct whc *whc, struct whc_qset *qset,
- struct urb *urb, int status);
-void process_halted_qtd(struct whc *whc, struct whc_qset *qset,
- struct whc_qtd *qtd);
-void process_inactive_qtd(struct whc *whc, struct whc_qset *qset,
- struct whc_qtd *qtd);
-enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset);
-void qset_remove_complete(struct whc *whc, struct whc_qset *qset);
-void pzl_update(struct whc *whc, uint32_t wusbcmd);
-void asl_update(struct whc *whc, uint32_t wusbcmd);
-
-/* debug.c */
-void whc_dbg_init(struct whc *whc);
-void whc_dbg_clean_up(struct whc *whc);
-
-#endif /* #ifndef __WHCD_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) data structures.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#ifndef _WHCI_WHCI_HC_H
-#define _WHCI_WHCI_HC_H
-
-#include <linux/list.h>
-
-/**
- * WHCI_PAGE_SIZE - page size use by WHCI
- *
- * WHCI assumes that host system uses pages of 4096 octets.
- */
-#define WHCI_PAGE_SIZE 4096
-
-
-/**
- * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single
- * qtd.
- *
- * This is 2^20 - 1.
- */
-#define QTD_MAX_XFER_SIZE 1048575
-
-
-/**
- * struct whc_qtd - Queue Element Transfer Descriptors (qTD)
- *
- * This describes the data for a bulk, control or interrupt transfer.
- *
- * [WHCI] section 3.2.4
- */
-struct whc_qtd {
- __le32 status; /*< remaining transfer len and transfer status */
- __le32 options;
- __le64 page_list_ptr; /*< physical pointer to data buffer page list*/
- __u8 setup[8]; /*< setup data for control transfers */
-} __attribute__((packed));
-
-#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */
-#define QTD_STS_HALTED (1 << 30) /* transfer halted */
-#define QTD_STS_DBE (1 << 29) /* data buffer error */
-#define QTD_STS_BABBLE (1 << 28) /* babble detected */
-#define QTD_STS_RCE (1 << 27) /* retry count exceeded */
-#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */
-#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */
-#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */
-#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */
-#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */
-#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff)
-
-#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */
-#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */
-
-/**
- * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD)
- *
- * This describes the data and other parameters for an isochronous
- * transfer.
- *
- * [WHCI] section 3.2.5
- */
-struct whc_itd {
- __le16 presentation_time; /*< presentation time for OUT transfers */
- __u8 num_segments; /*< number of data segments in segment list */
- __u8 status; /*< command execution status */
- __le32 options; /*< misc transfer options */
- __le64 page_list_ptr; /*< physical pointer to data buffer page list */
- __le64 seg_list_ptr; /*< physical pointer to segment list */
-} __attribute__((packed));
-
-#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */
-#define ITD_STS_DBE (1 << 5) /* data buffer error */
-#define ITD_STS_BABBLE (1 << 4) /* babble detected */
-#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */
-
-#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */
-#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */
-
-/**
- * Page list entry.
- *
- * A TD's page list must contain sufficient page list entries for the
- * total data length in the TD.
- *
- * [WHCI] section 3.2.4.3
- */
-struct whc_page_list_entry {
- __le64 buf_ptr; /*< physical pointer to buffer */
-} __attribute__((packed));
-
-/**
- * struct whc_seg_list_entry - Segment list entry.
- *
- * Describes a portion of the data buffer described in the containing
- * qTD's page list.
- *
- * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr
- * + qtd->seg_list_ptr[seg].offset;
- *
- * Segments can't cross page boundries.
- *
- * [WHCI] section 3.2.5.5
- */
-struct whc_seg_list_entry {
- __le16 len; /*< segment length */
- __u8 idx; /*< index into page list */
- __u8 status; /*< segment status */
- __le16 offset; /*< 12 bit offset into page */
-} __attribute__((packed));
-
-/**
- * struct whc_qhead - endpoint and status information for a qset.
- *
- * [WHCI] section 3.2.6
- */
-struct whc_qhead {
- __le64 link; /*< next qset in list */
- __le32 info1;
- __le32 info2;
- __le32 info3;
- __le16 status;
- __le16 err_count; /*< transaction error count */
- __le32 cur_window;
- __le32 scratch[3]; /*< h/w scratch area */
- union {
- struct whc_qtd qtd;
- struct whc_itd itd;
- } overlay;
-} __attribute__((packed));
-
-#define QH_LINK_PTR_MASK (~0x03Full)
-#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK)
-#define QH_LINK_IQS (1 << 4) /* isochronous queue set */
-#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */
-#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */
-
-#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */
-#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */
-#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */
-#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */
-#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */
-#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */
-#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */
-#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */
-#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */
-#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */
-#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */
-
-#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */
-#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */
-#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */
-#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */
-#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */
-#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */
-#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */
-#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */
-
-#define QH_INFO3_TX_RATE(r) ((r) << 24) /* PHY rate (see [ECMA-368] section 10.3.1.1) */
-#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */
-
-#define QH_STATUS_FLOW_CTRL (1 << 15)
-#define QH_STATUS_ICUR(i) ((i) << 5)
-#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7)
-#define QH_STATUS_SEQ_MASK 0x1f
-
-/**
- * usb_pipe_to_qh_type - USB core pipe type to QH transfer type
- *
- * Returns the QH type field for a USB core pipe type.
- */
-static inline unsigned usb_pipe_to_qh_type(unsigned pipe)
-{
- static const unsigned type[] = {
- [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC,
- [PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT,
- [PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL,
- [PIPE_BULK] = QH_INFO1_TR_TYPE_BULK,
- };
- return type[usb_pipetype(pipe)];
-}
-
-/**
- * Maxiumum number of TDs in a qset.
- */
-#define WHCI_QSET_TD_MAX 8
-
-/**
- * struct whc_qset - WUSB data transfers to a specific endpoint
- * @qh: the QHead of this qset
- * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt
- * transfers)
- * @itd: up to 8 iTDs (for qsets for isochronous transfers)
- * @qset_dma: DMA address for this qset
- * @whc: WHCI HC this qset is for
- * @ep: endpoint
- * @stds: list of sTDs queued to this qset
- * @ntds: number of qTDs queued (not necessarily the same as nTDs
- * field in the QH)
- * @td_start: index of the first qTD in the list
- * @td_end: index of next free qTD in the list (provided
- * ntds < WHCI_QSET_TD_MAX)
- *
- * Queue Sets (qsets) are added to the asynchronous schedule list
- * (ASL) or the periodic zone list (PZL).
- *
- * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate).
- * Each TD may refer to at most 1 MiB of data. If a single transfer
- * has > 8MiB of data, TDs can be reused as they are completed since
- * the TD list is used as a circular buffer. Similarly, several
- * (smaller) transfers may be queued in a qset.
- *
- * WHCI controllers may cache portions of the qsets in the ASL and
- * PZL, requiring the WHCD to inform the WHC that the lists have been
- * updated (fields changed or qsets inserted or removed). For safe
- * insertion and removal of qsets from the lists the schedule must be
- * stopped to avoid races in updating the QH link pointers.
- *
- * Since the HC is free to execute qsets in any order, all transfers
- * to an endpoint should use the same qset to ensure transfers are
- * executed in the order they're submitted.
- *
- * [WHCI] section 3.2.3
- */
-struct whc_qset {
- struct whc_qhead qh;
- union {
- struct whc_qtd qtd[WHCI_QSET_TD_MAX];
- struct whc_itd itd[WHCI_QSET_TD_MAX];
- };
-
- /* private data for WHCD */
- dma_addr_t qset_dma;
- struct whc *whc;
- struct usb_host_endpoint *ep;
- struct list_head stds;
- int ntds;
- int td_start;
- int td_end;
- struct list_head list_node;
- unsigned in_sw_list:1;
- unsigned in_hw_list:1;
- unsigned remove:1;
- unsigned reset:1;
- struct urb *pause_after_urb;
- struct completion remove_complete;
- uint16_t max_packet;
- uint8_t max_burst;
- uint8_t max_seq;
-};
-
-static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target)
-{
- if (target)
- *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target);
- else
- *ptr = QH_LINK_T;
-}
-
-/**
- * struct di_buf_entry - Device Information (DI) buffer entry.
- *
- * There's one of these per connected device.
- */
-struct di_buf_entry {
- __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */
- __le32 addr_sec_info; /*< addressing and security info */
- __le32 reserved[7];
-} __attribute__((packed));
-
-#define WHC_DI_SECURE (1 << 31)
-#define WHC_DI_DISABLE (1 << 30)
-#define WHC_DI_KEY_IDX(k) ((k) << 8)
-#define WHC_DI_KEY_IDX_MASK 0x0000ff00
-#define WHC_DI_DEV_ADDR(a) ((a) << 0)
-#define WHC_DI_DEV_ADDR_MASK 0x000000ff
-
-/**
- * struct dn_buf_entry - Device Notification (DN) buffer entry.
- *
- * [WHCI] section 3.2.8
- */
-struct dn_buf_entry {
- __u8 msg_size; /*< number of octets of valid DN data */
- __u8 reserved1;
- __u8 src_addr; /*< source address */
- __u8 status; /*< buffer entry status */
- __le32 tkid; /*< TKID for source device, valid if secure bit is set */
- __u8 dn_data[56]; /*< up to 56 octets of DN data */
-} __attribute__((packed));
-
-#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */
-#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */
-
-#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry))
-
-/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of
- data. [WHCI] section 2.4.7. */
-#define WHC_GEN_CMD_DATA_LEN 256
-
-/*
- * HC registers.
- *
- * [WHCI] section 2.4
- */
-
-#define WHCIVERSION 0x00
-
-#define WHCSPARAMS 0x04
-# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff)
-# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff)
-# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f)
-
-#define WUSBCMD 0x08
-# define WUSBCMD_BCID(b) ((b) << 16)
-# define WUSBCMD_BCID_MASK (0xff << 16)
-# define WUSBCMD_ASYNC_QSET_RM (1 << 12)
-# define WUSBCMD_PERIODIC_QSET_RM (1 << 11)
-# define WUSBCMD_WUSBSI(s) ((s) << 8)
-# define WUSBCMD_WUSBSI_MASK (0x7 << 8)
-# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7)
-# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6)
-# define WUSBCMD_ASYNC_UPDATED (1 << 5)
-# define WUSBCMD_PERIODIC_UPDATED (1 << 4)
-# define WUSBCMD_ASYNC_EN (1 << 3)
-# define WUSBCMD_PERIODIC_EN (1 << 2)
-# define WUSBCMD_WHCRESET (1 << 1)
-# define WUSBCMD_RUN (1 << 0)
-
-#define WUSBSTS 0x0c
-# define WUSBSTS_ASYNC_SCHED (1 << 15)
-# define WUSBSTS_PERIODIC_SCHED (1 << 14)
-# define WUSBSTS_DNTS_SCHED (1 << 13)
-# define WUSBSTS_HCHALTED (1 << 12)
-# define WUSBSTS_GEN_CMD_DONE (1 << 9)
-# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8)
-# define WUSBSTS_DNTS_OVERFLOW (1 << 7)
-# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6)
-# define WUSBSTS_HOST_ERR (1 << 5)
-# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4)
-# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3)
-# define WUSBSTS_DNTS_INT (1 << 2)
-# define WUSBSTS_ERR_INT (1 << 1)
-# define WUSBSTS_INT (1 << 0)
-# define WUSBSTS_INT_MASK 0x3ff
-
-#define WUSBINTR 0x10
-# define WUSBINTR_GEN_CMD_DONE (1 << 9)
-# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8)
-# define WUSBINTR_DNTS_OVERFLOW (1 << 7)
-# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6)
-# define WUSBINTR_HOST_ERR (1 << 5)
-# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4)
-# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3)
-# define WUSBINTR_DNTS_INT (1 << 2)
-# define WUSBINTR_ERR_INT (1 << 1)
-# define WUSBINTR_INT (1 << 0)
-# define WUSBINTR_ALL 0x3ff
-
-#define WUSBGENCMDSTS 0x14
-# define WUSBGENCMDSTS_ACTIVE (1 << 31)
-# define WUSBGENCMDSTS_ERROR (1 << 24)
-# define WUSBGENCMDSTS_IOC (1 << 23)
-# define WUSBGENCMDSTS_MMCIE_ADD 0x01
-# define WUSBGENCMDSTS_MMCIE_RM 0x02
-# define WUSBGENCMDSTS_SET_MAS 0x03
-# define WUSBGENCMDSTS_CHAN_STOP 0x04
-# define WUSBGENCMDSTS_RWP_EN 0x05
-
-#define WUSBGENCMDPARAMS 0x18
-#define WUSBGENADDR 0x20
-#define WUSBASYNCLISTADDR 0x28
-#define WUSBDNTSBUFADDR 0x30
-#define WUSBDEVICEINFOADDR 0x38
-
-#define WUSBSETSECKEYCMD 0x40
-# define WUSBSETSECKEYCMD_SET (1 << 31)
-# define WUSBSETSECKEYCMD_ERASE (1 << 30)
-# define WUSBSETSECKEYCMD_GTK (1 << 8)
-# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0)
-
-#define WUSBTKID 0x44
-#define WUSBSECKEY 0x48
-#define WUSBPERIODICLISTBASE 0x58
-#define WUSBMASINDEX 0x60
-
-#define WUSBDNTSCTRL 0x64
-# define WUSBDNTSCTRL_ACTIVE (1 << 31)
-# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8)
-# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0)
-
-#define WUSBTIME 0x68
-# define WUSBTIME_CHANNEL_TIME_MASK 0x00ffffff
-
-#define WUSBBPST 0x6c
-#define WUSBDIBUPDATED 0x70
-
-#endif /* #ifndef _WHCI_WHCI_HC_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless Host Controller (WHC) WUSB operations.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-
-#include "../../../uwb/include/umc.h"
-#include "../../wusbhc.h"
-
-#include "whcd.h"
-
-static int whc_update_di(struct whc *whc, int idx)
-{
- int offset = idx / 32;
- u32 bit = 1 << (idx % 32);
-
- le_writel(bit, whc->base + WUSBDIBUPDATED + offset);
-
- return whci_wait_for(&whc->umc->dev,
- whc->base + WUSBDIBUPDATED + offset, bit, 0,
- 100, "DI update");
-}
-
-/*
- * WHCI starts MMCs based on there being a valid GTK so these need
- * only start/stop the asynchronous and periodic schedules and send a
- * channel stop command.
- */
-
-int whc_wusbhc_start(struct wusbhc *wusbhc)
-{
- struct whc *whc = wusbhc_to_whc(wusbhc);
-
- asl_start(whc);
- pzl_start(whc);
-
- return 0;
-}
-
-void whc_wusbhc_stop(struct wusbhc *wusbhc, int delay)
-{
- struct whc *whc = wusbhc_to_whc(wusbhc);
- u32 stop_time, now_time;
- int ret;
-
- pzl_stop(whc);
- asl_stop(whc);
-
- now_time = le_readl(whc->base + WUSBTIME) & WUSBTIME_CHANNEL_TIME_MASK;
- stop_time = (now_time + ((delay * 8) << 7)) & 0x00ffffff;
- ret = whc_do_gencmd(whc, WUSBGENCMDSTS_CHAN_STOP, stop_time, NULL, 0);
- if (ret == 0)
- msleep(delay);
-}
-
-int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
- u8 handle, struct wuie_hdr *wuie)
-{
- struct whc *whc = wusbhc_to_whc(wusbhc);
- u32 params;
-
- params = (interval << 24)
- | (repeat_cnt << 16)
- | (wuie->bLength << 8)
- | handle;
-
- return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_ADD, params, wuie, wuie->bLength);
-}
-
-int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle)
-{
- struct whc *whc = wusbhc_to_whc(wusbhc);
- u32 params;
-
- params = handle;
-
- return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_RM, params, NULL, 0);
-}
-
-int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm)
-{
- struct whc *whc = wusbhc_to_whc(wusbhc);
-
- if (stream_index >= 0)
- whc_write_wusbcmd(whc, WUSBCMD_WUSBSI_MASK, WUSBCMD_WUSBSI(stream_index));
-
- return whc_do_gencmd(whc, WUSBGENCMDSTS_SET_MAS, 0, (void *)mas_bm, sizeof(*mas_bm));
-}
-
-int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
-{
- struct whc *whc = wusbhc_to_whc(wusbhc);
- int idx = wusb_dev->port_idx;
- struct di_buf_entry *di = &whc->di_buf[idx];
- int ret;
-
- mutex_lock(&whc->mutex);
-
- uwb_mas_bm_copy_le(di->availability_info, &wusb_dev->availability);
- di->addr_sec_info &= ~(WHC_DI_DISABLE | WHC_DI_DEV_ADDR_MASK);
- di->addr_sec_info |= WHC_DI_DEV_ADDR(wusb_dev->addr);
-
- ret = whc_update_di(whc, idx);
-
- mutex_unlock(&whc->mutex);
-
- return ret;
-}
-
-/*
- * Set the number of Device Notification Time Slots (DNTS) and enable
- * device notifications.
- */
-int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots)
-{
- struct whc *whc = wusbhc_to_whc(wusbhc);
- u32 dntsctrl;
-
- dntsctrl = WUSBDNTSCTRL_ACTIVE
- | WUSBDNTSCTRL_INTERVAL(interval)
- | WUSBDNTSCTRL_SLOTS(slots);
-
- le_writel(dntsctrl, whc->base + WUSBDNTSCTRL);
-
- return 0;
-}
-
-static int whc_set_key(struct whc *whc, u8 key_index, uint32_t tkid,
- const void *key, size_t key_size, bool is_gtk)
-{
- uint32_t setkeycmd;
- uint32_t seckey[4];
- int i;
- int ret;
-
- memcpy(seckey, key, key_size);
- setkeycmd = WUSBSETSECKEYCMD_SET | WUSBSETSECKEYCMD_IDX(key_index);
- if (is_gtk)
- setkeycmd |= WUSBSETSECKEYCMD_GTK;
-
- le_writel(tkid, whc->base + WUSBTKID);
- for (i = 0; i < 4; i++)
- le_writel(seckey[i], whc->base + WUSBSECKEY + 4*i);
- le_writel(setkeycmd, whc->base + WUSBSETSECKEYCMD);
-
- ret = whci_wait_for(&whc->umc->dev, whc->base + WUSBSETSECKEYCMD,
- WUSBSETSECKEYCMD_SET, 0, 100, "set key");
-
- return ret;
-}
-
-/**
- * whc_set_ptk - set the PTK to use for a device.
- *
- * The index into the key table for this PTK is the same as the
- * device's port index.
- */
-int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
- const void *ptk, size_t key_size)
-{
- struct whc *whc = wusbhc_to_whc(wusbhc);
- struct di_buf_entry *di = &whc->di_buf[port_idx];
- int ret;
-
- mutex_lock(&whc->mutex);
-
- if (ptk) {
- ret = whc_set_key(whc, port_idx, tkid, ptk, key_size, false);
- if (ret)
- goto out;
-
- di->addr_sec_info &= ~WHC_DI_KEY_IDX_MASK;
- di->addr_sec_info |= WHC_DI_SECURE | WHC_DI_KEY_IDX(port_idx);
- } else
- di->addr_sec_info &= ~WHC_DI_SECURE;
-
- ret = whc_update_di(whc, port_idx);
-out:
- mutex_unlock(&whc->mutex);
- return ret;
-}
-
-/**
- * whc_set_gtk - set the GTK for subsequent broadcast packets
- *
- * The GTK is stored in the last entry in the key table (the previous
- * N_DEVICES entries are for the per-device PTKs).
- */
-int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid,
- const void *gtk, size_t key_size)
-{
- struct whc *whc = wusbhc_to_whc(wusbhc);
- int ret;
-
- mutex_lock(&whc->mutex);
-
- ret = whc_set_key(whc, whc->n_devices, tkid, gtk, key_size, true);
-
- mutex_unlock(&whc->mutex);
-
- return ret;
-}
-
-int whc_set_cluster_id(struct whc *whc, u8 bcid)
-{
- whc_write_wusbcmd(whc, WUSBCMD_BCID_MASK, WUSBCMD_BCID(bcid));
- return 0;
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless USB - Cable Based Association
- *
- * Copyright (C) 2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- */
-#ifndef __LINUX_USB_ASSOCIATION_H
-#define __LINUX_USB_ASSOCIATION_H
-
-
-/*
- * Association attributes
- *
- * Association Models Supplement to WUSB 1.0 T[3-1]
- *
- * Each field in the structures has it's ID, it's length and then the
- * value. This is the actual definition of the field's ID and its
- * length.
- */
-struct wusb_am_attr {
- __u8 id;
- __u8 len;
-};
-
-/* Different fields defined by the spec */
-#define WUSB_AR_AssociationTypeId { .id = cpu_to_le16(0x0000), .len = cpu_to_le16(2) }
-#define WUSB_AR_AssociationSubTypeId { .id = cpu_to_le16(0x0001), .len = cpu_to_le16(2) }
-#define WUSB_AR_Length { .id = cpu_to_le16(0x0002), .len = cpu_to_le16(4) }
-#define WUSB_AR_AssociationStatus { .id = cpu_to_le16(0x0004), .len = cpu_to_le16(4) }
-#define WUSB_AR_LangID { .id = cpu_to_le16(0x0008), .len = cpu_to_le16(2) }
-#define WUSB_AR_DeviceFriendlyName { .id = cpu_to_le16(0x000b), .len = cpu_to_le16(64) } /* max */
-#define WUSB_AR_HostFriendlyName { .id = cpu_to_le16(0x000c), .len = cpu_to_le16(64) } /* max */
-#define WUSB_AR_CHID { .id = cpu_to_le16(0x1000), .len = cpu_to_le16(16) }
-#define WUSB_AR_CDID { .id = cpu_to_le16(0x1001), .len = cpu_to_le16(16) }
-#define WUSB_AR_ConnectionContext { .id = cpu_to_le16(0x1002), .len = cpu_to_le16(48) }
-#define WUSB_AR_BandGroups { .id = cpu_to_le16(0x1004), .len = cpu_to_le16(2) }
-
-/* CBAF Control Requests (AMS1.0[T4-1] */
-enum {
- CBAF_REQ_GET_ASSOCIATION_INFORMATION = 0x01,
- CBAF_REQ_GET_ASSOCIATION_REQUEST,
- CBAF_REQ_SET_ASSOCIATION_RESPONSE
-};
-
-/*
- * CBAF USB-interface defitions
- *
- * No altsettings, one optional interrupt endpoint.
- */
-enum {
- CBAF_IFACECLASS = 0xef,
- CBAF_IFACESUBCLASS = 0x03,
- CBAF_IFACEPROTOCOL = 0x01,
-};
-
-/* Association Information (AMS1.0[T4-3]) */
-struct wusb_cbaf_assoc_info {
- __le16 Length;
- __u8 NumAssociationRequests;
- __le16 Flags;
- __u8 AssociationRequestsArray[];
-} __attribute__((packed));
-
-/* Association Request (AMS1.0[T4-4]) */
-struct wusb_cbaf_assoc_request {
- __u8 AssociationDataIndex;
- __u8 Reserved;
- __le16 AssociationTypeId;
- __le16 AssociationSubTypeId;
- __le32 AssociationTypeInfoSize;
-} __attribute__((packed));
-
-enum {
- AR_TYPE_WUSB = 0x0001,
- AR_TYPE_WUSB_RETRIEVE_HOST_INFO = 0x0000,
- AR_TYPE_WUSB_ASSOCIATE = 0x0001,
-};
-
-/* Association Attribute header (AMS1.0[3.8]) */
-struct wusb_cbaf_attr_hdr {
- __le16 id;
- __le16 len;
-} __attribute__((packed));
-
-/* Host Info (AMS1.0[T4-7]) (yeah, more headers and fields...) */
-struct wusb_cbaf_host_info {
- struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
- __le16 AssociationTypeId;
- struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
- __le16 AssociationSubTypeId;
- struct wusb_cbaf_attr_hdr CHID_hdr;
- struct wusb_ckhdid CHID;
- struct wusb_cbaf_attr_hdr LangID_hdr;
- __le16 LangID;
- struct wusb_cbaf_attr_hdr HostFriendlyName_hdr;
- __u8 HostFriendlyName[];
-} __attribute__((packed));
-
-/* Device Info (AMS1.0[T4-8])
- *
- * I still don't get this tag'n'header stuff for each goddamn
- * field...
- */
-struct wusb_cbaf_device_info {
- struct wusb_cbaf_attr_hdr Length_hdr;
- __le32 Length;
- struct wusb_cbaf_attr_hdr CDID_hdr;
- struct wusb_ckhdid CDID;
- struct wusb_cbaf_attr_hdr BandGroups_hdr;
- __le16 BandGroups;
- struct wusb_cbaf_attr_hdr LangID_hdr;
- __le16 LangID;
- struct wusb_cbaf_attr_hdr DeviceFriendlyName_hdr;
- __u8 DeviceFriendlyName[];
-} __attribute__((packed));
-
-/* Connection Context; CC_DATA - Success case (AMS1.0[T4-9]) */
-struct wusb_cbaf_cc_data {
- struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
- __le16 AssociationTypeId;
- struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
- __le16 AssociationSubTypeId;
- struct wusb_cbaf_attr_hdr Length_hdr;
- __le32 Length;
- struct wusb_cbaf_attr_hdr ConnectionContext_hdr;
- struct wusb_ckhdid CHID;
- struct wusb_ckhdid CDID;
- struct wusb_ckhdid CK;
- struct wusb_cbaf_attr_hdr BandGroups_hdr;
- __le16 BandGroups;
-} __attribute__((packed));
-
-/* CC_DATA - Failure case (AMS1.0[T4-10]) */
-struct wusb_cbaf_cc_data_fail {
- struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
- __le16 AssociationTypeId;
- struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
- __le16 AssociationSubTypeId;
- struct wusb_cbaf_attr_hdr Length_hdr;
- __le16 Length;
- struct wusb_cbaf_attr_hdr AssociationStatus_hdr;
- __u32 AssociationStatus;
-} __attribute__((packed));
-
-#endif /* __LINUX_USB_ASSOCIATION_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless USB Wire Adapter constants and structures.
- *
- * Copyright (C) 2005-2006 Intel Corporation.
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * FIXME: docs
- * FIXME: organize properly, group logically
- *
- * All the event structures are defined in uwb/spec.h, as they are
- * common to the WHCI and WUSB radio control interfaces.
- *
- * References:
- * [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8
- */
-#ifndef __LINUX_USB_WUSB_WA_H
-#define __LINUX_USB_WUSB_WA_H
-
-/**
- * Radio Command Request for the Radio Control Interface
- *
- * Radio Control Interface command and event codes are the same as
- * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_*
- */
-enum {
- WA_EXEC_RC_CMD = 40, /* Radio Control command Request */
-};
-
-/* Wireless Adapter Requests ([WUSB] table 8-51) */
-enum {
- WUSB_REQ_ADD_MMC_IE = 20,
- WUSB_REQ_REMOVE_MMC_IE = 21,
- WUSB_REQ_SET_NUM_DNTS = 22,
- WUSB_REQ_SET_CLUSTER_ID = 23,
- WUSB_REQ_SET_DEV_INFO = 24,
- WUSB_REQ_GET_TIME = 25,
- WUSB_REQ_SET_STREAM_IDX = 26,
- WUSB_REQ_SET_WUSB_MAS = 27,
- WUSB_REQ_CHAN_STOP = 28,
-};
-
-
-/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */
-enum {
- WUSB_TIME_ADJ = 0,
- WUSB_TIME_BPST = 1,
- WUSB_TIME_WUSB = 2,
-};
-
-enum {
- WA_ENABLE = 0x01,
- WA_RESET = 0x02,
- RPIPE_PAUSE = 0x1,
- RPIPE_STALL = 0x2,
-};
-
-/* Responses from Get Status request ([WUSB] section 8.3.1.6) */
-enum {
- WA_STATUS_ENABLED = 0x01,
- WA_STATUS_RESETTING = 0x02
-};
-
-enum rpipe_crs {
- RPIPE_CRS_CTL = 0x01,
- RPIPE_CRS_ISO = 0x02,
- RPIPE_CRS_BULK = 0x04,
- RPIPE_CRS_INTR = 0x08
-};
-
-/**
- * RPipe descriptor ([WUSB] section 8.5.2.11)
- *
- * FIXME: explain rpipes
- */
-struct usb_rpipe_descriptor {
- u8 bLength;
- u8 bDescriptorType;
- __le16 wRPipeIndex;
- __le16 wRequests;
- __le16 wBlocks; /* rw if 0 */
- __le16 wMaxPacketSize; /* rw */
- union {
- u8 dwa_bHSHubAddress; /* rw: DWA. */
- u8 hwa_bMaxBurst; /* rw: HWA. */
- };
- union {
- u8 dwa_bHSHubPort; /* rw: DWA. */
- u8 hwa_bDeviceInfoIndex; /* rw: HWA. */
- };
- u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */
- union {
- u8 dwa_bDeviceAddress; /* rw: DWA Target device address. */
- u8 hwa_reserved; /* rw: HWA. */
- };
- u8 bEndpointAddress; /* rw: Target EP address */
- u8 bDataSequence; /* ro: Current Data sequence */
- __le32 dwCurrentWindow; /* ro */
- u8 bMaxDataSequence; /* ro?: max supported seq */
- u8 bInterval; /* rw: */
- u8 bOverTheAirInterval; /* rw: */
- u8 bmAttribute; /* ro? */
- u8 bmCharacteristics; /* ro? enum rpipe_attr, supported xsactions */
- u8 bmRetryOptions; /* rw? */
- __le16 wNumTransactionErrors; /* rw */
-} __attribute__ ((packed));
-
-/**
- * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4)
- *
- * These are the notifications coming on the notification endpoint of
- * an HWA and a DWA.
- */
-enum wa_notif_type {
- DWA_NOTIF_RWAKE = 0x91,
- DWA_NOTIF_PORTSTATUS = 0x92,
- WA_NOTIF_TRANSFER = 0x93,
- HWA_NOTIF_BPST_ADJ = 0x94,
- HWA_NOTIF_DN = 0x95,
-};
-
-/**
- * Wire Adapter notification header
- *
- * Notifications coming from a wire adapter use a common header
- * defined in [WUSB] sections 8.4.5 & 8.5.4.
- */
-struct wa_notif_hdr {
- u8 bLength;
- u8 bNotifyType; /* enum wa_notif_type */
-} __packed;
-
-/**
- * HWA DN Received notification [(WUSB] section 8.5.4.2)
- *
- * The DNData is specified in WUSB1.0[7.6]. For each device
- * notification we received, we just need to dispatch it.
- *
- * @dndata: this is really an array of notifications, but all start
- * with the same header.
- */
-struct hwa_notif_dn {
- struct wa_notif_hdr hdr;
- u8 bSourceDeviceAddr; /* from errata 2005/07 */
- u8 bmAttributes;
- struct wusb_dn_hdr dndata[];
-} __packed;
-
-/* [WUSB] section 8.3.3 */
-enum wa_xfer_type {
- WA_XFER_TYPE_CTL = 0x80,
- WA_XFER_TYPE_BI = 0x81, /* bulk/interrupt */
- WA_XFER_TYPE_ISO = 0x82,
- WA_XFER_RESULT = 0x83,
- WA_XFER_ABORT = 0x84,
- WA_XFER_ISO_PACKET_INFO = 0xA0,
- WA_XFER_ISO_PACKET_STATUS = 0xA1,
-};
-
-/* [WUSB] section 8.3.3 */
-struct wa_xfer_hdr {
- u8 bLength; /* 0x18 */
- u8 bRequestType; /* 0x80 WA_REQUEST_TYPE_CTL */
- __le16 wRPipe; /* RPipe index */
- __le32 dwTransferID; /* Host-assigned ID */
- __le32 dwTransferLength; /* Length of data to xfer */
- u8 bTransferSegment;
-} __packed;
-
-struct wa_xfer_ctl {
- struct wa_xfer_hdr hdr;
- u8 bmAttribute;
- __le16 wReserved;
- struct usb_ctrlrequest baSetupData;
-} __packed;
-
-struct wa_xfer_bi {
- struct wa_xfer_hdr hdr;
- u8 bReserved;
- __le16 wReserved;
-} __packed;
-
-/* [WUSB] section 8.5.5 */
-struct wa_xfer_hwaiso {
- struct wa_xfer_hdr hdr;
- u8 bReserved;
- __le16 wPresentationTime;
- __le32 dwNumOfPackets;
-} __packed;
-
-struct wa_xfer_packet_info_hwaiso {
- __le16 wLength;
- u8 bPacketType;
- u8 bReserved;
- __le16 PacketLength[0];
-} __packed;
-
-struct wa_xfer_packet_status_len_hwaiso {
- __le16 PacketLength;
- __le16 PacketStatus;
-} __packed;
-
-struct wa_xfer_packet_status_hwaiso {
- __le16 wLength;
- u8 bPacketType;
- u8 bReserved;
- struct wa_xfer_packet_status_len_hwaiso PacketStatus[0];
-} __packed;
-
-/* [WUSB] section 8.3.3.5 */
-struct wa_xfer_abort {
- u8 bLength;
- u8 bRequestType;
- __le16 wRPipe; /* RPipe index */
- __le32 dwTransferID; /* Host-assigned ID */
-} __packed;
-
-/**
- * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
- *
- */
-struct wa_notif_xfer {
- struct wa_notif_hdr hdr;
- u8 bEndpoint;
- u8 Reserved;
-} __packed;
-
-/** Transfer result basic codes [WUSB] table 8-15 */
-enum {
- WA_XFER_STATUS_SUCCESS,
- WA_XFER_STATUS_HALTED,
- WA_XFER_STATUS_DATA_BUFFER_ERROR,
- WA_XFER_STATUS_BABBLE,
- WA_XFER_RESERVED,
- WA_XFER_STATUS_NOT_FOUND,
- WA_XFER_STATUS_INSUFFICIENT_RESOURCE,
- WA_XFER_STATUS_TRANSACTION_ERROR,
- WA_XFER_STATUS_ABORTED,
- WA_XFER_STATUS_RPIPE_NOT_READY,
- WA_XFER_INVALID_FORMAT,
- WA_XFER_UNEXPECTED_SEGMENT_NUMBER,
- WA_XFER_STATUS_RPIPE_TYPE_MISMATCH,
-};
-
-/** [WUSB] section 8.3.3.4 */
-struct wa_xfer_result {
- struct wa_notif_hdr hdr;
- __le32 dwTransferID;
- __le32 dwTransferLength;
- u8 bTransferSegment;
- u8 bTransferStatus;
- __le32 dwNumOfPackets;
-} __packed;
-
-/**
- * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
- *
- * NOTE: u16 fields are read Little Endian from the hardware.
- *
- * @bNumPorts is the original max number of devices that the host can
- * connect; we might chop this so the stack can handle
- * it. In case you need to access it, use wusbhc->ports_max
- * if it is a Wireless USB WA.
- */
-struct usb_wa_descriptor {
- u8 bLength;
- u8 bDescriptorType;
- __le16 bcdWAVersion;
- u8 bNumPorts; /* don't use!! */
- u8 bmAttributes; /* Reserved == 0 */
- __le16 wNumRPipes;
- __le16 wRPipeMaxBlock;
- u8 bRPipeBlockSize;
- u8 bPwrOn2PwrGood;
- u8 bNumMMCIEs;
- u8 DeviceRemovable; /* FIXME: in DWA this is up to 16 bytes */
-} __packed;
-
-/**
- * HWA Device Information Buffer (WUSB1.0[T8.54])
- */
-struct hwa_dev_info {
- u8 bmDeviceAvailability[32]; /* FIXME: ignored for now */
- u8 bDeviceAddress;
- __le16 wPHYRates;
- u8 bmDeviceAttribute;
-} __packed;
-
-#endif /* #ifndef __LINUX_USB_WUSB_WA_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless USB Standard Definitions
- * Event Size Tables
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * FIXME: docs
- * FIXME: organize properly, group logically
- *
- * All the event structures are defined in uwb/spec.h, as they are
- * common to the WHCI and WUSB radio control interfaces.
- */
-
-#ifndef __WUSB_H__
-#define __WUSB_H__
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/usb/ch9.h>
-#include <linux/param.h>
-#include "../../uwb/include/spec.h"
-
-/**
- * WUSB Information Element header
- *
- * I don't know why, they decided to make it different to the MBOA MAC
- * IE Header; beats me.
- */
-struct wuie_hdr {
- u8 bLength;
- u8 bIEIdentifier;
-} __attribute__((packed));
-
-enum {
- WUIE_ID_WCTA = 0x80,
- WUIE_ID_CONNECTACK,
- WUIE_ID_HOST_INFO,
- WUIE_ID_CHANGE_ANNOUNCE,
- WUIE_ID_DEVICE_DISCONNECT,
- WUIE_ID_HOST_DISCONNECT,
- WUIE_ID_KEEP_ALIVE = 0x89,
- WUIE_ID_ISOCH_DISCARD,
- WUIE_ID_RESET_DEVICE,
-};
-
-/**
- * Maximum number of array elements in a WUSB IE.
- *
- * WUSB1.0[7.5 before table 7-38] says that in WUSB IEs that
- * are "arrays" have to limited to 4 elements. So we define it
- * like that to ease up and submit only the neeed size.
- */
-#define WUIE_ELT_MAX 4
-
-/**
- * Wrapper for the data that defines a CHID, a CDID or a CK
- *
- * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of
- * data. In order to avoid confusion and enforce types, we wrap it.
- *
- * Make it packed, as we use it in some hw definitions.
- */
-struct wusb_ckhdid {
- u8 data[16];
-} __attribute__((packed));
-
-static const struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } };
-
-#define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1)
-
-/**
- * WUSB IE: Host Information (WUSB1.0[7.5.2])
- *
- * Used to provide information about the host to the Wireless USB
- * devices in range (CHID can be used as an ASCII string).
- */
-struct wuie_host_info {
- struct wuie_hdr hdr;
- __le16 attributes;
- struct wusb_ckhdid CHID;
-} __attribute__((packed));
-
-/**
- * WUSB IE: Connect Ack (WUSB1.0[7.5.1])
- *
- * Used to acknowledge device connect requests. See note for
- * WUIE_ELT_MAX.
- */
-struct wuie_connect_ack {
- struct wuie_hdr hdr;
- struct {
- struct wusb_ckhdid CDID;
- u8 bDeviceAddress; /* 0 means unused */
- u8 bReserved;
- } blk[WUIE_ELT_MAX];
-} __attribute__((packed));
-
-/**
- * WUSB IE Host Information Element, Connect Availability
- *
- * WUSB1.0[7.5.2], bmAttributes description
- */
-enum {
- WUIE_HI_CAP_RECONNECT = 0,
- WUIE_HI_CAP_LIMITED,
- WUIE_HI_CAP_RESERVED,
- WUIE_HI_CAP_ALL,
-};
-
-/**
- * WUSB IE: Channel Stop (WUSB1.0[7.5.8])
- *
- * Tells devices the host is going to stop sending MMCs and will disappear.
- */
-struct wuie_channel_stop {
- struct wuie_hdr hdr;
- u8 attributes;
- u8 timestamp[3];
-} __attribute__((packed));
-
-/**
- * WUSB IE: Keepalive (WUSB1.0[7.5.9])
- *
- * Ask device(s) to send keepalives.
- */
-struct wuie_keep_alive {
- struct wuie_hdr hdr;
- u8 bDeviceAddress[WUIE_ELT_MAX];
-} __attribute__((packed));
-
-/**
- * WUSB IE: Reset device (WUSB1.0[7.5.11])
- *
- * Tell device to reset; in all truth, we can fit 4 CDIDs, but we only
- * use it for one at the time...
- *
- * In any case, this request is a wee bit silly: why don't they target
- * by address??
- */
-struct wuie_reset {
- struct wuie_hdr hdr;
- struct wusb_ckhdid CDID;
-} __attribute__((packed));
-
-/**
- * WUSB IE: Disconnect device (WUSB1.0[7.5.11])
- *
- * Tell device to disconnect; we can fit 4 addresses, but we only use
- * it for one at the time...
- */
-struct wuie_disconnect {
- struct wuie_hdr hdr;
- u8 bDeviceAddress;
- u8 padding;
-} __attribute__((packed));
-
-/**
- * WUSB IE: Host disconnect ([WUSB] section 7.5.5)
- *
- * Tells all connected devices to disconnect.
- */
-struct wuie_host_disconnect {
- struct wuie_hdr hdr;
-} __attribute__((packed));
-
-/**
- * WUSB Device Notification header (WUSB1.0[7.6])
- */
-struct wusb_dn_hdr {
- u8 bType;
- u8 notifdata[];
-} __attribute__((packed));
-
-/** Device Notification codes (WUSB1.0[Table 7-54]) */
-enum WUSB_DN {
- WUSB_DN_CONNECT = 0x01,
- WUSB_DN_DISCONNECT = 0x02,
- WUSB_DN_EPRDY = 0x03,
- WUSB_DN_MASAVAILCHANGED = 0x04,
- WUSB_DN_RWAKE = 0x05,
- WUSB_DN_SLEEP = 0x06,
- WUSB_DN_ALIVE = 0x07,
-};
-
-/** WUSB Device Notification Connect */
-struct wusb_dn_connect {
- struct wusb_dn_hdr hdr;
- __le16 attributes;
- struct wusb_ckhdid CDID;
-} __attribute__((packed));
-
-static inline int wusb_dn_connect_prev_dev_addr(const struct wusb_dn_connect *dn)
-{
- return le16_to_cpu(dn->attributes) & 0xff;
-}
-
-static inline int wusb_dn_connect_new_connection(const struct wusb_dn_connect *dn)
-{
- return (le16_to_cpu(dn->attributes) >> 8) & 0x1;
-}
-
-static inline int wusb_dn_connect_beacon_behavior(const struct wusb_dn_connect *dn)
-{
- return (le16_to_cpu(dn->attributes) >> 9) & 0x03;
-}
-
-/** Device is alive (aka: pong) (WUSB1.0[7.6.7]) */
-struct wusb_dn_alive {
- struct wusb_dn_hdr hdr;
-} __attribute__((packed));
-
-/** Device is disconnecting (WUSB1.0[7.6.2]) */
-struct wusb_dn_disconnect {
- struct wusb_dn_hdr hdr;
-} __attribute__((packed));
-
-/* General constants */
-enum {
- WUSB_TRUST_TIMEOUT_MS = 4000, /* [WUSB] section 4.15.1 */
-};
-
-/*
- * WUSB Crypto stuff (WUSB1.0[6])
- */
-
-extern const char *wusb_et_name(u8);
-
-/**
- * WUSB key index WUSB1.0[7.3.2.4], for usage when setting keys for
- * the host or the device.
- */
-static inline u8 wusb_key_index(int index, int type, int originator)
-{
- return (originator << 6) | (type << 4) | index;
-}
-
-#define WUSB_KEY_INDEX_TYPE_PTK 0 /* for HWA only */
-#define WUSB_KEY_INDEX_TYPE_ASSOC 1
-#define WUSB_KEY_INDEX_TYPE_GTK 2
-#define WUSB_KEY_INDEX_ORIGINATOR_HOST 0
-#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE 1
-/* bits 0-3 used for the key index. */
-#define WUSB_KEY_INDEX_MAX 15
-
-/* A CCM Nonce, defined in WUSB1.0[6.4.1] */
-struct aes_ccm_nonce {
- u8 sfn[6]; /* Little Endian */
- u8 tkid[3]; /* LE */
- struct uwb_dev_addr dest_addr;
- struct uwb_dev_addr src_addr;
-} __attribute__((packed));
-
-/* A CCM operation label, defined on WUSB1.0[6.5.x] */
-struct aes_ccm_label {
- u8 data[14];
-} __attribute__((packed));
-
-/*
- * Input to the key derivation sequence defined in
- * WUSB1.0[6.5.1]. Rest of the data is in the CCM Nonce passed to the
- * PRF function.
- */
-struct wusb_keydvt_in {
- u8 hnonce[16];
- u8 dnonce[16];
-} __attribute__((packed));
-
-/*
- * Output from the key derivation sequence defined in
- * WUSB1.0[6.5.1].
- */
-struct wusb_keydvt_out {
- u8 kck[16];
- u8 ptk[16];
-} __attribute__((packed));
-
-/* Pseudo Random Function WUSB1.0[6.5] */
-extern int wusb_crypto_init(void);
-extern void wusb_crypto_exit(void);
-extern ssize_t wusb_prf(void *out, size_t out_size,
- const u8 key[16], const struct aes_ccm_nonce *_n,
- const struct aes_ccm_label *a,
- const void *b, size_t blen, size_t len);
-
-static inline int wusb_prf_64(void *out, size_t out_size, const u8 key[16],
- const struct aes_ccm_nonce *n,
- const struct aes_ccm_label *a,
- const void *b, size_t blen)
-{
- return wusb_prf(out, out_size, key, n, a, b, blen, 64);
-}
-
-static inline int wusb_prf_128(void *out, size_t out_size, const u8 key[16],
- const struct aes_ccm_nonce *n,
- const struct aes_ccm_label *a,
- const void *b, size_t blen)
-{
- return wusb_prf(out, out_size, key, n, a, b, blen, 128);
-}
-
-static inline int wusb_prf_256(void *out, size_t out_size, const u8 key[16],
- const struct aes_ccm_nonce *n,
- const struct aes_ccm_label *a,
- const void *b, size_t blen)
-{
- return wusb_prf(out, out_size, key, n, a, b, blen, 256);
-}
-
-/* Key derivation WUSB1.0[6.5.1] */
-static inline int wusb_key_derive(struct wusb_keydvt_out *keydvt_out,
- const u8 key[16],
- const struct aes_ccm_nonce *n,
- const struct wusb_keydvt_in *keydvt_in)
-{
- const struct aes_ccm_label a = { .data = "Pair-wise keys" };
- return wusb_prf_256(keydvt_out, sizeof(*keydvt_out), key, n, &a,
- keydvt_in, sizeof(*keydvt_in));
-}
-
-/*
- * Out-of-band MIC Generation WUSB1.0[6.5.2]
- *
- * Compute the MIC over @key, @n and @hs and place it in @mic_out.
- *
- * @mic_out: Where to place the 8 byte MIC tag
- * @key: KCK from the derivation process
- * @n: CCM nonce, n->sfn == 0, TKID as established in the
- * process.
- * @hs: Handshake struct for phase 2 of the 4-way.
- * hs->bStatus and hs->bReserved are zero.
- * hs->bMessageNumber is 2 (WUSB1.0[7.3.2.5.2]
- * hs->dest_addr is the device's USB address padded with 0
- * hs->src_addr is the hosts's UWB device address
- * hs->mic is ignored (as we compute that value).
- */
-static inline int wusb_oob_mic(u8 mic_out[8], const u8 key[16],
- const struct aes_ccm_nonce *n,
- const struct usb_handshake *hs)
-{
- const struct aes_ccm_label a = { .data = "out-of-bandMIC" };
- return wusb_prf_64(mic_out, 8, key, n, &a,
- hs, sizeof(*hs) - sizeof(hs->MIC));
-}
-
-#endif /* #ifndef __WUSB_H__ */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
- * MMC (Microscheduled Management Command) handling
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * WUIEs and MMC IEs...well, they are almost the same at the end. MMC
- * IEs are Wireless USB IEs that go into the MMC period...[what is
- * that? look in Design-overview.txt].
- *
- *
- * This is a simple subsystem to keep track of which IEs are being
- * sent by the host in the MMC period.
- *
- * For each WUIE we ask to send, we keep it in an array, so we can
- * request its removal later, or replace the content. They are tracked
- * by pointer, so be sure to use the same pointer if you want to
- * remove it or update the contents.
- *
- * FIXME:
- * - add timers that autoremove intervalled IEs?
- */
-#include <linux/slab.h>
-#include <linux/export.h>
-#include "include/wusb.h"
-#include "wusbhc.h"
-
-/* Initialize the MMCIEs handling mechanism */
-int wusbhc_mmcie_create(struct wusbhc *wusbhc)
-{
- u8 mmcies = wusbhc->mmcies_max;
- wusbhc->mmcie = kcalloc(mmcies, sizeof(wusbhc->mmcie[0]), GFP_KERNEL);
- if (wusbhc->mmcie == NULL)
- return -ENOMEM;
- mutex_init(&wusbhc->mmcie_mutex);
- return 0;
-}
-
-/* Release resources used by the MMCIEs handling mechanism */
-void wusbhc_mmcie_destroy(struct wusbhc *wusbhc)
-{
- kfree(wusbhc->mmcie);
-}
-
-/*
- * Add or replace an MMC Wireless USB IE.
- *
- * @interval: See WUSB1.0[8.5.3.1]
- * @repeat_cnt: See WUSB1.0[8.5.3.1]
- * @handle: See WUSB1.0[8.5.3.1]
- * @wuie: Pointer to the header of the WUSB IE data to add.
- * MUST BE allocated in a kmalloc buffer (no stack or
- * vmalloc).
- * THE CALLER ALWAYS OWNS THE POINTER (we don't free it
- * on remove, we just forget about it).
- * @returns: 0 if ok, < 0 errno code on error.
- *
- * Goes over the *whole* @wusbhc->mmcie array looking for (a) the
- * first free spot and (b) if @wuie is already in the array (aka:
- * transmitted in the MMCs) the spot were it is.
- *
- * If present, we "overwrite it" (update).
- *
- *
- * NOTE: Need special ordering rules -- see below WUSB1.0 Table 7-38.
- * The host uses the handle as the 'sort' index. We
- * allocate the last one always for the WUIE_ID_HOST_INFO, and
- * the rest, first come first serve in inverse order.
- *
- * Host software must make sure that it adds the other IEs in
- * the right order... the host hardware is responsible for
- * placing the WCTA IEs in the right place with the other IEs
- * set by host software.
- *
- * NOTE: we can access wusbhc->wa_descr without locking because it is
- * read only.
- */
-int wusbhc_mmcie_set(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
- struct wuie_hdr *wuie)
-{
- int result = -ENOBUFS;
- unsigned handle, itr;
-
- /* Search a handle, taking into account the ordering */
- mutex_lock(&wusbhc->mmcie_mutex);
- switch (wuie->bIEIdentifier) {
- case WUIE_ID_HOST_INFO:
- /* Always last */
- handle = wusbhc->mmcies_max - 1;
- break;
- case WUIE_ID_ISOCH_DISCARD:
- dev_err(wusbhc->dev, "Special ordering case for WUIE ID 0x%x "
- "unimplemented\n", wuie->bIEIdentifier);
- result = -ENOSYS;
- goto error_unlock;
- default:
- /* search for it or find the last empty slot */
- handle = ~0;
- for (itr = 0; itr < wusbhc->mmcies_max - 1; itr++) {
- if (wusbhc->mmcie[itr] == wuie) {
- handle = itr;
- break;
- }
- if (wusbhc->mmcie[itr] == NULL)
- handle = itr;
- }
- if (handle == ~0)
- goto error_unlock;
- }
- result = (wusbhc->mmcie_add)(wusbhc, interval, repeat_cnt, handle,
- wuie);
- if (result >= 0)
- wusbhc->mmcie[handle] = wuie;
-error_unlock:
- mutex_unlock(&wusbhc->mmcie_mutex);
- return result;
-}
-EXPORT_SYMBOL_GPL(wusbhc_mmcie_set);
-
-/*
- * Remove an MMC IE previously added with wusbhc_mmcie_set()
- *
- * @wuie Pointer used to add the WUIE
- */
-void wusbhc_mmcie_rm(struct wusbhc *wusbhc, struct wuie_hdr *wuie)
-{
- int result;
- unsigned handle, itr;
-
- mutex_lock(&wusbhc->mmcie_mutex);
- for (itr = 0; itr < wusbhc->mmcies_max; itr++) {
- if (wusbhc->mmcie[itr] == wuie) {
- handle = itr;
- goto found;
- }
- }
- mutex_unlock(&wusbhc->mmcie_mutex);
- return;
-
-found:
- result = (wusbhc->mmcie_rm)(wusbhc, handle);
- if (result == 0)
- wusbhc->mmcie[itr] = NULL;
- mutex_unlock(&wusbhc->mmcie_mutex);
-}
-EXPORT_SYMBOL_GPL(wusbhc_mmcie_rm);
-
-static int wusbhc_mmc_start(struct wusbhc *wusbhc)
-{
- int ret;
-
- mutex_lock(&wusbhc->mutex);
- ret = wusbhc->start(wusbhc);
- if (ret >= 0)
- wusbhc->active = 1;
- mutex_unlock(&wusbhc->mutex);
-
- return ret;
-}
-
-static void wusbhc_mmc_stop(struct wusbhc *wusbhc)
-{
- mutex_lock(&wusbhc->mutex);
- wusbhc->active = 0;
- wusbhc->stop(wusbhc, WUSB_CHANNEL_STOP_DELAY_MS);
- mutex_unlock(&wusbhc->mutex);
-}
-
-/*
- * wusbhc_start - start transmitting MMCs and accepting connections
- * @wusbhc: the HC to start
- *
- * Establishes a cluster reservation, enables device connections, and
- * starts MMCs with appropriate DNTS parameters.
- */
-int wusbhc_start(struct wusbhc *wusbhc)
-{
- int result;
- struct device *dev = wusbhc->dev;
-
- WARN_ON(wusbhc->wuie_host_info != NULL);
- BUG_ON(wusbhc->uwb_rc == NULL);
-
- result = wusbhc_rsv_establish(wusbhc);
- if (result < 0) {
- dev_err(dev, "cannot establish cluster reservation: %d\n",
- result);
- goto error_rsv_establish;
- }
-
- result = wusbhc_devconnect_start(wusbhc);
- if (result < 0) {
- dev_err(dev, "error enabling device connections: %d\n",
- result);
- goto error_devconnect_start;
- }
-
- result = wusbhc_sec_start(wusbhc);
- if (result < 0) {
- dev_err(dev, "error starting security in the HC: %d\n",
- result);
- goto error_sec_start;
- }
-
- result = wusbhc->set_num_dnts(wusbhc, wusbhc->dnts_interval,
- wusbhc->dnts_num_slots);
- if (result < 0) {
- dev_err(dev, "Cannot set DNTS parameters: %d\n", result);
- goto error_set_num_dnts;
- }
- result = wusbhc_mmc_start(wusbhc);
- if (result < 0) {
- dev_err(dev, "error starting wusbch: %d\n", result);
- goto error_wusbhc_start;
- }
-
- return 0;
-
-error_wusbhc_start:
- wusbhc_sec_stop(wusbhc);
-error_set_num_dnts:
-error_sec_start:
- wusbhc_devconnect_stop(wusbhc);
-error_devconnect_start:
- wusbhc_rsv_terminate(wusbhc);
-error_rsv_establish:
- return result;
-}
-
-/*
- * wusbhc_stop - stop transmitting MMCs
- * @wusbhc: the HC to stop
- *
- * Stops the WUSB channel and removes the cluster reservation.
- */
-void wusbhc_stop(struct wusbhc *wusbhc)
-{
- wusbhc_mmc_stop(wusbhc);
- wusbhc_sec_stop(wusbhc);
- wusbhc_devconnect_stop(wusbhc);
- wusbhc_rsv_terminate(wusbhc);
-}
-
-/*
- * Set/reset/update a new CHID
- *
- * Depending on the previous state of the MMCs, start, stop or change
- * the sent MMC. This effectively switches the host controller on and
- * off (radio wise).
- */
-int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid)
-{
- int result = 0;
-
- if (memcmp(chid, &wusb_ckhdid_zero, sizeof(*chid)) == 0)
- chid = NULL;
-
- mutex_lock(&wusbhc->mutex);
- if (chid) {
- if (wusbhc->active) {
- mutex_unlock(&wusbhc->mutex);
- return -EBUSY;
- }
- wusbhc->chid = *chid;
- }
-
- /* register with UWB if we haven't already since we are about to start
- the radio. */
- if ((chid) && (wusbhc->uwb_rc == NULL)) {
- wusbhc->uwb_rc = uwb_rc_get_by_grandpa(wusbhc->dev->parent);
- if (wusbhc->uwb_rc == NULL) {
- result = -ENODEV;
- dev_err(wusbhc->dev,
- "Cannot get associated UWB Host Controller\n");
- goto error_rc_get;
- }
-
- result = wusbhc_pal_register(wusbhc);
- if (result < 0) {
- dev_err(wusbhc->dev, "Cannot register as a UWB PAL\n");
- goto error_pal_register;
- }
- }
- mutex_unlock(&wusbhc->mutex);
-
- if (chid)
- result = uwb_radio_start(&wusbhc->pal);
- else if (wusbhc->uwb_rc)
- uwb_radio_stop(&wusbhc->pal);
-
- return result;
-
-error_pal_register:
- uwb_rc_put(wusbhc->uwb_rc);
- wusbhc->uwb_rc = NULL;
-error_rc_get:
- mutex_unlock(&wusbhc->mutex);
-
- return result;
-}
-EXPORT_SYMBOL_GPL(wusbhc_chid_set);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless USB Host Controller
- * UWB Protocol Adaptation Layer (PAL) glue.
- *
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- */
-#include "wusbhc.h"
-
-static void wusbhc_channel_changed(struct uwb_pal *pal, int channel)
-{
- struct wusbhc *wusbhc = container_of(pal, struct wusbhc, pal);
-
- dev_dbg(wusbhc->dev, "%s: channel = %d\n", __func__, channel);
- if (channel < 0)
- wusbhc_stop(wusbhc);
- else
- wusbhc_start(wusbhc);
-}
-
-/**
- * wusbhc_pal_register - register the WUSB HC as a UWB PAL
- * @wusbhc: the WUSB HC
- */
-int wusbhc_pal_register(struct wusbhc *wusbhc)
-{
- uwb_pal_init(&wusbhc->pal);
-
- wusbhc->pal.name = "wusbhc";
- wusbhc->pal.device = wusbhc->usb_hcd.self.controller;
- wusbhc->pal.rc = wusbhc->uwb_rc;
- wusbhc->pal.channel_changed = wusbhc_channel_changed;
-
- return uwb_pal_register(&wusbhc->pal);
-}
-
-/**
- * wusbhc_pal_unregister - unregister the WUSB HC as a UWB PAL
- * @wusbhc: the WUSB HC
- */
-void wusbhc_pal_unregister(struct wusbhc *wusbhc)
-{
- if (wusbhc->uwb_rc)
- uwb_pal_unregister(&wusbhc->pal);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * WUSB cluster reservation management
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- */
-#include <linux/kernel.h>
-
-#include "../uwb/uwb.h"
-#include "wusbhc.h"
-
-/*
- * WUSB cluster reservations are multicast reservations with the
- * broadcast cluster ID (BCID) as the target DevAddr.
- *
- * FIXME: consider adjusting the reservation depending on what devices
- * are attached.
- */
-
-static int wusbhc_bwa_set(struct wusbhc *wusbhc, u8 stream,
- const struct uwb_mas_bm *mas)
-{
- if (mas == NULL)
- mas = &uwb_mas_bm_zero;
- return wusbhc->bwa_set(wusbhc, stream, mas);
-}
-
-/**
- * wusbhc_rsv_complete_cb - WUSB HC reservation complete callback
- * @rsv: the reservation
- *
- * Either set or clear the HC's view of the reservation.
- *
- * FIXME: when a reservation is denied the HC should be stopped.
- */
-static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv)
-{
- struct wusbhc *wusbhc = rsv->pal_priv;
- struct device *dev = wusbhc->dev;
- struct uwb_mas_bm mas;
-
- dev_dbg(dev, "%s: state = %d\n", __func__, rsv->state);
- switch (rsv->state) {
- case UWB_RSV_STATE_O_ESTABLISHED:
- uwb_rsv_get_usable_mas(rsv, &mas);
- dev_dbg(dev, "established reservation: %*pb\n",
- UWB_NUM_MAS, mas.bm);
- wusbhc_bwa_set(wusbhc, rsv->stream, &mas);
- break;
- case UWB_RSV_STATE_NONE:
- dev_dbg(dev, "removed reservation\n");
- wusbhc_bwa_set(wusbhc, 0, NULL);
- break;
- default:
- dev_dbg(dev, "unexpected reservation state: %d\n", rsv->state);
- break;
- }
-}
-
-
-/**
- * wusbhc_rsv_establish - establish a reservation for the cluster
- * @wusbhc: the WUSB HC requesting a bandwidth reservation
- */
-int wusbhc_rsv_establish(struct wusbhc *wusbhc)
-{
- struct uwb_rc *rc = wusbhc->uwb_rc;
- struct uwb_rsv *rsv;
- struct uwb_dev_addr bcid;
- int ret;
-
- if (rc == NULL)
- return -ENODEV;
-
- rsv = uwb_rsv_create(rc, wusbhc_rsv_complete_cb, wusbhc);
- if (rsv == NULL)
- return -ENOMEM;
-
- bcid.data[0] = wusbhc->cluster_id;
- bcid.data[1] = 0;
-
- rsv->target.type = UWB_RSV_TARGET_DEVADDR;
- rsv->target.devaddr = bcid;
- rsv->type = UWB_DRP_TYPE_PRIVATE;
- rsv->max_mas = 256; /* try to get as much as possible */
- rsv->min_mas = 15; /* one MAS per zone */
- rsv->max_interval = 1; /* max latency is one zone */
- rsv->is_multicast = true;
-
- ret = uwb_rsv_establish(rsv);
- if (ret == 0)
- wusbhc->rsv = rsv;
- else
- uwb_rsv_destroy(rsv);
- return ret;
-}
-
-
-/**
- * wusbhc_rsv_terminate - terminate the cluster reservation
- * @wusbhc: the WUSB host whose reservation is to be terminated
- */
-void wusbhc_rsv_terminate(struct wusbhc *wusbhc)
-{
- if (wusbhc->rsv) {
- uwb_rsv_terminate(wusbhc->rsv);
- uwb_rsv_destroy(wusbhc->rsv);
- wusbhc->rsv = NULL;
- }
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless USB Host Controller
- * Root Hub operations
- *
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * We fake a root hub that has fake ports (as many as simultaneous
- * devices the Wireless USB Host Controller can deal with). For each
- * port we keep an state in @wusbhc->port[index] identical to the one
- * specified in the USB2.0[ch11] spec and some extra device
- * information that complements the one in 'struct usb_device' (as
- * this lacs a hcpriv pointer).
- *
- * Note this is common to WHCI and HWA host controllers.
- *
- * Through here we enable most of the state changes that the USB stack
- * will use to connect or disconnect devices. We need to do some
- * forced adaptation of Wireless USB device states vs. wired:
- *
- * USB: WUSB:
- *
- * Port Powered-off port slot n/a
- * Powered-on port slot available
- * Disconnected port slot available
- * Connected port slot assigned device
- * device sent DN_Connect
- * device was authenticated
- * Enabled device is authenticated, transitioned
- * from unauth -> auth -> default address
- * -> enabled
- * Reset disconnect
- * Disable disconnect
- *
- * This maps the standard USB port states with the WUSB device states
- * so we can fake ports without having to modify the USB stack.
- *
- * FIXME: this process will change in the future
- *
- *
- * ENTRY POINTS
- *
- * Our entry points into here are, as in hcd.c, the USB stack root hub
- * ops defined in the usb_hcd struct:
- *
- * wusbhc_rh_status_data() Provide hub and port status data bitmap
- *
- * wusbhc_rh_control() Execution of all the major requests
- * you can do to a hub (Set|Clear
- * features, get descriptors, status, etc).
- *
- * wusbhc_rh_[suspend|resume]() That
- *
- * wusbhc_rh_start_port_reset() ??? unimplemented
- */
-#include <linux/slab.h>
-#include <linux/export.h>
-#include "wusbhc.h"
-
-/*
- * Reset a fake port
- *
- * Using a Reset Device IE is too heavyweight as it causes the device
- * to enter the UnConnected state and leave the cluster, this can mean
- * that when the device reconnects it is connected to a different fake
- * port.
- *
- * Instead, reset authenticated devices with a SetAddress(0), followed
- * by a SetAddresss(AuthAddr).
- *
- * For unauthenticated devices just pretend to reset but do nothing.
- * If the device initialization continues to fail it will eventually
- * time out after TrustTimeout and enter the UnConnected state.
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- *
- * Supposedly we are the only thread accesing @wusbhc->port; in any
- * case, maybe we should move the mutex locking from
- * wusbhc_devconnect_auth() to here.
- *
- * @port_idx refers to the wusbhc's port index, not the USB port number
- */
-static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
-{
- int result = 0;
- struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
- struct wusb_dev *wusb_dev = port->wusb_dev;
-
- if (wusb_dev == NULL)
- return -ENOTCONN;
-
- port->status |= USB_PORT_STAT_RESET;
- port->change |= USB_PORT_STAT_C_RESET;
-
- if (wusb_dev->addr & WUSB_DEV_ADDR_UNAUTH)
- result = 0;
- else
- result = wusb_dev_update_address(wusbhc, wusb_dev);
-
- port->status &= ~USB_PORT_STAT_RESET;
- port->status |= USB_PORT_STAT_ENABLE;
- port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE;
-
- return result;
-}
-
-/*
- * Return the hub change status bitmap
- *
- * The bits in the change status bitmap are cleared when a
- * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4].
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- *
- * WARNING!! This gets called from atomic context; we cannot get the
- * mutex--the only race condition we can find is some bit
- * changing just after we copy it, which shouldn't be too
- * big of a problem [and we can't make it an spinlock
- * because other parts need to take it and sleep] .
- *
- * @usb_hcd is refcounted, so it won't disappear under us
- * and before killing a host, the polling of the root hub
- * would be stopped anyway.
- */
-int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- size_t cnt, size, bits_set = 0;
-
- /* WE DON'T LOCK, see comment */
- /* round up to bytes. Hub bit is bit 0 so add 1. */
- size = DIV_ROUND_UP(wusbhc->ports_max + 1, 8);
-
- /* clear the output buffer. */
- memset(_buf, 0, size);
- /* set the bit for each changed port. */
- for (cnt = 0; cnt < wusbhc->ports_max; cnt++) {
-
- if (wusb_port_by_idx(wusbhc, cnt)->change) {
- const int bitpos = cnt+1;
-
- _buf[bitpos/8] |= (1 << (bitpos % 8));
- bits_set++;
- }
- }
-
- return bits_set ? size : 0;
-}
-EXPORT_SYMBOL_GPL(wusbhc_rh_status_data);
-
-/*
- * Return the hub's descriptor
- *
- * NOTE: almost cut and paste from ehci-hub.c
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked
- */
-static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue,
- u16 wIndex,
- struct usb_hub_descriptor *descr,
- u16 wLength)
-{
- u16 temp = 1 + (wusbhc->ports_max / 8);
- u8 length = 7 + 2 * temp;
-
- if (wLength < length)
- return -ENOSPC;
- descr->bDescLength = 7 + 2 * temp;
- descr->bDescriptorType = USB_DT_HUB; /* HUB type */
- descr->bNbrPorts = wusbhc->ports_max;
- descr->wHubCharacteristics = cpu_to_le16(
- HUB_CHAR_COMMON_LPSM /* All ports power at once */
- | 0x00 /* not part of compound device */
- | HUB_CHAR_NO_OCPM /* No overcurrent protection */
- | 0x00 /* 8 FS think time FIXME ?? */
- | 0x00); /* No port indicators */
- descr->bPwrOn2PwrGood = 0;
- descr->bHubContrCurrent = 0;
- /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
- memset(&descr->u.hs.DeviceRemovable[0], 0, temp);
- memset(&descr->u.hs.DeviceRemovable[temp], 0xff, temp);
- return 0;
-}
-
-/*
- * Clear a hub feature
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- *
- * Nothing to do, so no locking needed ;)
- */
-static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature)
-{
- int result;
-
- switch (feature) {
- case C_HUB_LOCAL_POWER:
- /* FIXME: maybe plug bit 0 to the power input status,
- * if any?
- * see wusbhc_rh_get_hub_status() */
- case C_HUB_OVER_CURRENT:
- result = 0;
- break;
- default:
- result = -EPIPE;
- }
- return result;
-}
-
-/*
- * Return hub status (it is always zero...)
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- *
- * Nothing to do, so no locking needed ;)
- */
-static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf,
- u16 wLength)
-{
- /* FIXME: maybe plug bit 0 to the power input status (if any)? */
- *buf = 0;
- return 0;
-}
-
-/*
- * Set a port feature
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- */
-static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature,
- u8 selector, u8 port_idx)
-{
- struct device *dev = wusbhc->dev;
-
- if (port_idx > wusbhc->ports_max)
- return -EINVAL;
-
- switch (feature) {
- /* According to USB2.0[11.24.2.13]p2, these features
- * are not required to be implemented. */
- case USB_PORT_FEAT_C_OVER_CURRENT:
- case USB_PORT_FEAT_C_ENABLE:
- case USB_PORT_FEAT_C_SUSPEND:
- case USB_PORT_FEAT_C_CONNECTION:
- case USB_PORT_FEAT_C_RESET:
- return 0;
- case USB_PORT_FEAT_POWER:
- /* No such thing, but we fake it works */
- mutex_lock(&wusbhc->mutex);
- wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER;
- mutex_unlock(&wusbhc->mutex);
- return 0;
- case USB_PORT_FEAT_RESET:
- return wusbhc_rh_port_reset(wusbhc, port_idx);
- case USB_PORT_FEAT_ENABLE:
- case USB_PORT_FEAT_SUSPEND:
- dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n",
- port_idx, feature, selector);
- return -ENOSYS;
- default:
- dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n",
- port_idx, feature, selector);
- return -EPIPE;
- }
-
- return 0;
-}
-
-/*
- * Clear a port feature...
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- */
-static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature,
- u8 selector, u8 port_idx)
-{
- int result = 0;
- struct device *dev = wusbhc->dev;
-
- if (port_idx > wusbhc->ports_max)
- return -EINVAL;
-
- mutex_lock(&wusbhc->mutex);
- switch (feature) {
- case USB_PORT_FEAT_POWER: /* fake port always on */
- /* According to USB2.0[11.24.2.7.1.4], no need to implement? */
- case USB_PORT_FEAT_C_OVER_CURRENT:
- break;
- case USB_PORT_FEAT_C_RESET:
- wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET;
- break;
- case USB_PORT_FEAT_C_CONNECTION:
- wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION;
- break;
- case USB_PORT_FEAT_ENABLE:
- __wusbhc_dev_disable(wusbhc, port_idx);
- break;
- case USB_PORT_FEAT_C_ENABLE:
- wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE;
- break;
- case USB_PORT_FEAT_SUSPEND:
- case USB_PORT_FEAT_C_SUSPEND:
- dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n",
- port_idx, feature, selector);
- result = -ENOSYS;
- break;
- default:
- dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n",
- port_idx, feature, selector);
- result = -EPIPE;
- break;
- }
- mutex_unlock(&wusbhc->mutex);
-
- return result;
-}
-
-/*
- * Return the port's status
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- */
-static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx,
- u32 *_buf, u16 wLength)
-{
- __le16 *buf = (__le16 *)_buf;
-
- if (port_idx > wusbhc->ports_max)
- return -EINVAL;
-
- mutex_lock(&wusbhc->mutex);
- buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status);
- buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change);
- mutex_unlock(&wusbhc->mutex);
-
- return 0;
-}
-
-/*
- * Entry point for Root Hub operations
- *
- * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
- */
-int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue,
- u16 wIndex, char *buf, u16 wLength)
-{
- int result = -ENOSYS;
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
-
- switch (reqntype) {
- case GetHubDescriptor:
- result = wusbhc_rh_get_hub_descr(
- wusbhc, wValue, wIndex,
- (struct usb_hub_descriptor *) buf, wLength);
- break;
- case ClearHubFeature:
- result = wusbhc_rh_clear_hub_feat(wusbhc, wValue);
- break;
- case GetHubStatus:
- result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength);
- break;
-
- case SetPortFeature:
- result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8,
- (wIndex & 0xff) - 1);
- break;
- case ClearPortFeature:
- result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8,
- (wIndex & 0xff) - 1);
- break;
- case GetPortStatus:
- result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1,
- (u32 *)buf, wLength);
- break;
-
- case SetHubFeature:
- default:
- dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) "
- "UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype,
- wValue, wIndex, buf, wLength);
- /* dump_stack(); */
- result = -ENOSYS;
- }
- return result;
-}
-EXPORT_SYMBOL_GPL(wusbhc_rh_control);
-
-int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx)
-{
- struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
- dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n",
- __func__, usb_hcd, wusbhc, port_idx);
- WARN_ON(1);
- return -ENOSYS;
-}
-EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset);
-
-static void wusb_port_init(struct wusb_port *port)
-{
- port->status |= USB_PORT_STAT_HIGH_SPEED;
-}
-
-/*
- * Alloc fake port specific fields and status.
- */
-int wusbhc_rh_create(struct wusbhc *wusbhc)
-{
- int result = -ENOMEM;
- size_t port_size, itr;
- port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]);
- wusbhc->port = kzalloc(port_size, GFP_KERNEL);
- if (wusbhc->port == NULL)
- goto error_port_alloc;
- for (itr = 0; itr < wusbhc->ports_max; itr++)
- wusb_port_init(&wusbhc->port[itr]);
- result = 0;
-error_port_alloc:
- return result;
-}
-
-void wusbhc_rh_destroy(struct wusbhc *wusbhc)
-{
- kfree(wusbhc->port);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless USB Host Controller
- * Security support: encryption enablement, etc
- *
- * Copyright (C) 2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- */
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/usb/ch9.h>
-#include <linux/random.h>
-#include <linux/export.h>
-#include "wusbhc.h"
-#include <asm/unaligned.h>
-
-static void wusbhc_gtk_rekey_work(struct work_struct *work);
-
-int wusbhc_sec_create(struct wusbhc *wusbhc)
-{
- /*
- * WQ is singlethread because we need to serialize rekey operations.
- * Use a separate workqueue for security operations instead of the
- * wusbd workqueue because security operations may need to communicate
- * directly with downstream wireless devices using synchronous URBs.
- * If a device is not responding, this could block other host
- * controller operations.
- */
- wusbhc->wq_security = create_singlethread_workqueue("wusbd_security");
- if (wusbhc->wq_security == NULL) {
- pr_err("WUSB-core: Cannot create wusbd_security workqueue\n");
- return -ENOMEM;
- }
-
- wusbhc->gtk.descr.bLength = sizeof(wusbhc->gtk.descr) +
- sizeof(wusbhc->gtk.data);
- wusbhc->gtk.descr.bDescriptorType = USB_DT_KEY;
- wusbhc->gtk.descr.bReserved = 0;
- wusbhc->gtk_index = 0;
-
- INIT_WORK(&wusbhc->gtk_rekey_work, wusbhc_gtk_rekey_work);
-
- return 0;
-}
-
-
-/* Called when the HC is destroyed */
-void wusbhc_sec_destroy(struct wusbhc *wusbhc)
-{
- destroy_workqueue(wusbhc->wq_security);
-}
-
-
-/**
- * wusbhc_next_tkid - generate a new, currently unused, TKID
- * @wusbhc: the WUSB host controller
- * @wusb_dev: the device whose PTK the TKID is for
- * (or NULL for a TKID for a GTK)
- *
- * The generated TKID consists of two parts: the device's authenticated
- * address (or 0 or a GTK); and an incrementing number. This ensures
- * that TKIDs cannot be shared between devices and by the time the
- * incrementing number wraps around the older TKIDs will no longer be
- * in use (a maximum of two keys may be active at any one time).
- */
-static u32 wusbhc_next_tkid(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
-{
- u32 *tkid;
- u32 addr;
-
- if (wusb_dev == NULL) {
- tkid = &wusbhc->gtk_tkid;
- addr = 0;
- } else {
- tkid = &wusb_port_by_idx(wusbhc, wusb_dev->port_idx)->ptk_tkid;
- addr = wusb_dev->addr & 0x7f;
- }
-
- *tkid = (addr << 8) | ((*tkid + 1) & 0xff);
-
- return *tkid;
-}
-
-static void wusbhc_generate_gtk(struct wusbhc *wusbhc)
-{
- const size_t key_size = sizeof(wusbhc->gtk.data);
- u32 tkid;
-
- tkid = wusbhc_next_tkid(wusbhc, NULL);
-
- wusbhc->gtk.descr.tTKID[0] = (tkid >> 0) & 0xff;
- wusbhc->gtk.descr.tTKID[1] = (tkid >> 8) & 0xff;
- wusbhc->gtk.descr.tTKID[2] = (tkid >> 16) & 0xff;
-
- get_random_bytes(wusbhc->gtk.descr.bKeyData, key_size);
-}
-
-/**
- * wusbhc_sec_start - start the security management process
- * @wusbhc: the WUSB host controller
- *
- * Generate and set an initial GTK on the host controller.
- *
- * Called when the HC is started.
- */
-int wusbhc_sec_start(struct wusbhc *wusbhc)
-{
- const size_t key_size = sizeof(wusbhc->gtk.data);
- int result;
-
- wusbhc_generate_gtk(wusbhc);
-
- result = wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid,
- &wusbhc->gtk.descr.bKeyData, key_size);
- if (result < 0)
- dev_err(wusbhc->dev, "cannot set GTK for the host: %d\n",
- result);
-
- return result;
-}
-
-/**
- * wusbhc_sec_stop - stop the security management process
- * @wusbhc: the WUSB host controller
- *
- * Wait for any pending GTK rekeys to stop.
- */
-void wusbhc_sec_stop(struct wusbhc *wusbhc)
-{
- cancel_work_sync(&wusbhc->gtk_rekey_work);
-}
-
-
-/** @returns encryption type name */
-const char *wusb_et_name(u8 x)
-{
- switch (x) {
- case USB_ENC_TYPE_UNSECURE: return "unsecure";
- case USB_ENC_TYPE_WIRED: return "wired";
- case USB_ENC_TYPE_CCM_1: return "CCM-1";
- case USB_ENC_TYPE_RSA_1: return "RSA-1";
- default: return "unknown";
- }
-}
-EXPORT_SYMBOL_GPL(wusb_et_name);
-
-/*
- * Set the device encryption method
- *
- * We tell the device which encryption method to use; we do this when
- * setting up the device's security.
- */
-static int wusb_dev_set_encryption(struct usb_device *usb_dev, int value)
-{
- int result;
- struct device *dev = &usb_dev->dev;
- struct wusb_dev *wusb_dev = usb_dev->wusb_dev;
-
- if (value) {
- value = wusb_dev->ccm1_etd.bEncryptionValue;
- } else {
- /* FIXME: should be wusb_dev->etd[UNSECURE].bEncryptionValue */
- value = 0;
- }
- /* Set device's */
- result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
- USB_REQ_SET_ENCRYPTION,
- USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- value, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (result < 0)
- dev_err(dev, "Can't set device's WUSB encryption to "
- "%s (value %d): %d\n",
- wusb_et_name(wusb_dev->ccm1_etd.bEncryptionType),
- wusb_dev->ccm1_etd.bEncryptionValue, result);
- return result;
-}
-
-/*
- * Set the GTK to be used by a device.
- *
- * The device must be authenticated.
- */
-static int wusb_dev_set_gtk(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
-{
- struct usb_device *usb_dev = wusb_dev->usb_dev;
- u8 key_index = wusb_key_index(wusbhc->gtk_index,
- WUSB_KEY_INDEX_TYPE_GTK, WUSB_KEY_INDEX_ORIGINATOR_HOST);
-
- return usb_control_msg(
- usb_dev, usb_sndctrlpipe(usb_dev, 0),
- USB_REQ_SET_DESCRIPTOR,
- USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- USB_DT_KEY << 8 | key_index, 0,
- &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength,
- USB_CTRL_SET_TIMEOUT);
-}
-
-
-/* FIXME: prototype for adding security */
-int wusb_dev_sec_add(struct wusbhc *wusbhc,
- struct usb_device *usb_dev, struct wusb_dev *wusb_dev)
-{
- int result, bytes, secd_size;
- struct device *dev = &usb_dev->dev;
- struct usb_security_descriptor *secd, *new_secd;
- const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL;
- const void *itr, *top;
- char buf[64];
-
- secd = kmalloc(sizeof(*secd), GFP_KERNEL);
- if (secd == NULL) {
- result = -ENOMEM;
- goto out;
- }
-
- result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
- 0, secd, sizeof(*secd));
- if (result < (int)sizeof(*secd)) {
- dev_err(dev, "Can't read security descriptor or "
- "not enough data: %d\n", result);
- goto out;
- }
- secd_size = le16_to_cpu(secd->wTotalLength);
- new_secd = krealloc(secd, secd_size, GFP_KERNEL);
- if (new_secd == NULL) {
- dev_err(dev,
- "Can't allocate space for security descriptors\n");
- result = -ENOMEM;
- goto out;
- }
- secd = new_secd;
- result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
- 0, secd, secd_size);
- if (result < secd_size) {
- dev_err(dev, "Can't read security descriptor or "
- "not enough data: %d\n", result);
- goto out;
- }
- bytes = 0;
- itr = &secd[1];
- top = (void *)secd + result;
- while (itr < top) {
- etd = itr;
- if (top - itr < sizeof(*etd)) {
- dev_err(dev, "BUG: bad device security descriptor; "
- "not enough data (%zu vs %zu bytes left)\n",
- top - itr, sizeof(*etd));
- break;
- }
- if (etd->bLength < sizeof(*etd)) {
- dev_err(dev, "BUG: bad device encryption descriptor; "
- "descriptor is too short "
- "(%u vs %zu needed)\n",
- etd->bLength, sizeof(*etd));
- break;
- }
- itr += etd->bLength;
- bytes += snprintf(buf + bytes, sizeof(buf) - bytes,
- "%s (0x%02x/%02x) ",
- wusb_et_name(etd->bEncryptionType),
- etd->bEncryptionValue, etd->bAuthKeyIndex);
- if (etd->bEncryptionType == USB_ENC_TYPE_CCM_1)
- ccm1_etd = etd;
- }
- /* This code only supports CCM1 as of now. */
- /* FIXME: user has to choose which sec mode to use?
- * In theory we want CCM */
- if (ccm1_etd == NULL) {
- dev_err(dev, "WUSB device doesn't support CCM1 encryption, "
- "can't use!\n");
- result = -EINVAL;
- goto out;
- }
- wusb_dev->ccm1_etd = *ccm1_etd;
- dev_dbg(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n",
- buf, wusb_et_name(ccm1_etd->bEncryptionType),
- ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex);
- result = 0;
-out:
- kfree(secd);
- return result;
-}
-
-void wusb_dev_sec_rm(struct wusb_dev *wusb_dev)
-{
- /* Nothing so far */
-}
-
-/**
- * Update the address of an unauthenticated WUSB device
- *
- * Once we have successfully authenticated, we take it to addr0 state
- * and then to a normal address.
- *
- * Before the device's address (as known by it) was usb_dev->devnum |
- * 0x80 (unauthenticated address). With this we update it to usb_dev->devnum.
- */
-int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
-{
- int result = -ENOMEM;
- struct usb_device *usb_dev = wusb_dev->usb_dev;
- struct device *dev = &usb_dev->dev;
- u8 new_address = wusb_dev->addr & 0x7F;
-
- /* Set address 0 */
- result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
- USB_REQ_SET_ADDRESS,
- USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (result < 0) {
- dev_err(dev, "auth failed: can't set address 0: %d\n",
- result);
- goto error_addr0;
- }
- result = wusb_set_dev_addr(wusbhc, wusb_dev, 0);
- if (result < 0)
- goto error_addr0;
- usb_set_device_state(usb_dev, USB_STATE_DEFAULT);
- usb_ep0_reinit(usb_dev);
-
- /* Set new (authenticated) address. */
- result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
- USB_REQ_SET_ADDRESS,
- USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- new_address, 0, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- if (result < 0) {
- dev_err(dev, "auth failed: can't set address %u: %d\n",
- new_address, result);
- goto error_addr;
- }
- result = wusb_set_dev_addr(wusbhc, wusb_dev, new_address);
- if (result < 0)
- goto error_addr;
- usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
- usb_ep0_reinit(usb_dev);
- usb_dev->authenticated = 1;
-error_addr:
-error_addr0:
- return result;
-}
-
-/*
- *
- *
- */
-/* FIXME: split and cleanup */
-int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
- struct wusb_ckhdid *ck)
-{
- int result = -ENOMEM;
- struct usb_device *usb_dev = wusb_dev->usb_dev;
- struct device *dev = &usb_dev->dev;
- u32 tkid;
- struct usb_handshake *hs;
- struct aes_ccm_nonce ccm_n;
- u8 mic[8];
- struct wusb_keydvt_in keydvt_in;
- struct wusb_keydvt_out keydvt_out;
-
- hs = kcalloc(3, sizeof(hs[0]), GFP_KERNEL);
- if (!hs)
- goto error_kzalloc;
-
- /* We need to turn encryption before beginning the 4way
- * hshake (WUSB1.0[.3.2.2]) */
- result = wusb_dev_set_encryption(usb_dev, 1);
- if (result < 0)
- goto error_dev_set_encryption;
-
- tkid = wusbhc_next_tkid(wusbhc, wusb_dev);
-
- hs[0].bMessageNumber = 1;
- hs[0].bStatus = 0;
- put_unaligned_le32(tkid, hs[0].tTKID);
- hs[0].bReserved = 0;
- memcpy(hs[0].CDID, &wusb_dev->cdid, sizeof(hs[0].CDID));
- get_random_bytes(&hs[0].nonce, sizeof(hs[0].nonce));
- memset(hs[0].MIC, 0, sizeof(hs[0].MIC)); /* Per WUSB1.0[T7-22] */
-
- result = usb_control_msg(
- usb_dev, usb_sndctrlpipe(usb_dev, 0),
- USB_REQ_SET_HANDSHAKE,
- USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- 1, 0, &hs[0], sizeof(hs[0]), USB_CTRL_SET_TIMEOUT);
- if (result < 0) {
- dev_err(dev, "Handshake1: request failed: %d\n", result);
- goto error_hs1;
- }
-
- /* Handshake 2, from the device -- need to verify fields */
- result = usb_control_msg(
- usb_dev, usb_rcvctrlpipe(usb_dev, 0),
- USB_REQ_GET_HANDSHAKE,
- USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- 2, 0, &hs[1], sizeof(hs[1]), USB_CTRL_GET_TIMEOUT);
- if (result < 0) {
- dev_err(dev, "Handshake2: request failed: %d\n", result);
- goto error_hs2;
- }
-
- result = -EINVAL;
- if (hs[1].bMessageNumber != 2) {
- dev_err(dev, "Handshake2 failed: bad message number %u\n",
- hs[1].bMessageNumber);
- goto error_hs2;
- }
- if (hs[1].bStatus != 0) {
- dev_err(dev, "Handshake2 failed: bad status %u\n",
- hs[1].bStatus);
- goto error_hs2;
- }
- if (memcmp(hs[0].tTKID, hs[1].tTKID, sizeof(hs[0].tTKID))) {
- dev_err(dev, "Handshake2 failed: TKID mismatch "
- "(#1 0x%02x%02x%02x vs #2 0x%02x%02x%02x)\n",
- hs[0].tTKID[0], hs[0].tTKID[1], hs[0].tTKID[2],
- hs[1].tTKID[0], hs[1].tTKID[1], hs[1].tTKID[2]);
- goto error_hs2;
- }
- if (memcmp(hs[0].CDID, hs[1].CDID, sizeof(hs[0].CDID))) {
- dev_err(dev, "Handshake2 failed: CDID mismatch\n");
- goto error_hs2;
- }
-
- /* Setup the CCM nonce */
- memset(&ccm_n.sfn, 0, sizeof(ccm_n.sfn)); /* Per WUSB1.0[6.5.2] */
- put_unaligned_le32(tkid, ccm_n.tkid);
- ccm_n.src_addr = wusbhc->uwb_rc->uwb_dev.dev_addr;
- ccm_n.dest_addr.data[0] = wusb_dev->addr;
- ccm_n.dest_addr.data[1] = 0;
-
- /* Derive the KCK and PTK from CK, the CCM, H and D nonces */
- memcpy(keydvt_in.hnonce, hs[0].nonce, sizeof(keydvt_in.hnonce));
- memcpy(keydvt_in.dnonce, hs[1].nonce, sizeof(keydvt_in.dnonce));
- result = wusb_key_derive(&keydvt_out, ck->data, &ccm_n, &keydvt_in);
- if (result < 0) {
- dev_err(dev, "Handshake2 failed: cannot derive keys: %d\n",
- result);
- goto error_hs2;
- }
-
- /* Compute MIC and verify it */
- result = wusb_oob_mic(mic, keydvt_out.kck, &ccm_n, &hs[1]);
- if (result < 0) {
- dev_err(dev, "Handshake2 failed: cannot compute MIC: %d\n",
- result);
- goto error_hs2;
- }
-
- if (memcmp(hs[1].MIC, mic, sizeof(hs[1].MIC))) {
- dev_err(dev, "Handshake2 failed: MIC mismatch\n");
- goto error_hs2;
- }
-
- /* Send Handshake3 */
- hs[2].bMessageNumber = 3;
- hs[2].bStatus = 0;
- put_unaligned_le32(tkid, hs[2].tTKID);
- hs[2].bReserved = 0;
- memcpy(hs[2].CDID, &wusb_dev->cdid, sizeof(hs[2].CDID));
- memcpy(hs[2].nonce, hs[0].nonce, sizeof(hs[2].nonce));
- result = wusb_oob_mic(hs[2].MIC, keydvt_out.kck, &ccm_n, &hs[2]);
- if (result < 0) {
- dev_err(dev, "Handshake3 failed: cannot compute MIC: %d\n",
- result);
- goto error_hs2;
- }
-
- result = usb_control_msg(
- usb_dev, usb_sndctrlpipe(usb_dev, 0),
- USB_REQ_SET_HANDSHAKE,
- USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- 3, 0, &hs[2], sizeof(hs[2]), USB_CTRL_SET_TIMEOUT);
- if (result < 0) {
- dev_err(dev, "Handshake3: request failed: %d\n", result);
- goto error_hs3;
- }
-
- result = wusbhc->set_ptk(wusbhc, wusb_dev->port_idx, tkid,
- keydvt_out.ptk, sizeof(keydvt_out.ptk));
- if (result < 0)
- goto error_wusbhc_set_ptk;
-
- result = wusb_dev_set_gtk(wusbhc, wusb_dev);
- if (result < 0) {
- dev_err(dev, "Set GTK for device: request failed: %d\n",
- result);
- goto error_wusbhc_set_gtk;
- }
-
- /* Update the device's address from unauth to auth */
- if (usb_dev->authenticated == 0) {
- result = wusb_dev_update_address(wusbhc, wusb_dev);
- if (result < 0)
- goto error_dev_update_address;
- }
- result = 0;
- dev_info(dev, "device authenticated\n");
-
-error_dev_update_address:
-error_wusbhc_set_gtk:
-error_wusbhc_set_ptk:
-error_hs3:
-error_hs2:
-error_hs1:
- memset(hs, 0, 3*sizeof(hs[0]));
- memzero_explicit(&keydvt_out, sizeof(keydvt_out));
- memzero_explicit(&keydvt_in, sizeof(keydvt_in));
- memzero_explicit(&ccm_n, sizeof(ccm_n));
- memzero_explicit(mic, sizeof(mic));
- if (result < 0)
- wusb_dev_set_encryption(usb_dev, 0);
-error_dev_set_encryption:
- kfree(hs);
-error_kzalloc:
- return result;
-}
-
-/*
- * Once all connected and authenticated devices have received the new
- * GTK, switch the host to using it.
- */
-static void wusbhc_gtk_rekey_work(struct work_struct *work)
-{
- struct wusbhc *wusbhc = container_of(work,
- struct wusbhc, gtk_rekey_work);
- size_t key_size = sizeof(wusbhc->gtk.data);
- int port_idx;
- struct wusb_dev *wusb_dev, *wusb_dev_next;
- LIST_HEAD(rekey_list);
-
- mutex_lock(&wusbhc->mutex);
- /* generate the new key */
- wusbhc_generate_gtk(wusbhc);
- /* roll the gtk index. */
- wusbhc->gtk_index = (wusbhc->gtk_index + 1) % (WUSB_KEY_INDEX_MAX + 1);
- /*
- * Save all connected devices on a list while holding wusbhc->mutex and
- * take a reference to each one. Then submit the set key request to
- * them after releasing the lock in order to avoid a deadlock.
- */
- for (port_idx = 0; port_idx < wusbhc->ports_max; port_idx++) {
- wusb_dev = wusbhc->port[port_idx].wusb_dev;
- if (!wusb_dev || !wusb_dev->usb_dev
- || !wusb_dev->usb_dev->authenticated)
- continue;
-
- wusb_dev_get(wusb_dev);
- list_add_tail(&wusb_dev->rekey_node, &rekey_list);
- }
- mutex_unlock(&wusbhc->mutex);
-
- /* Submit the rekey requests without holding wusbhc->mutex. */
- list_for_each_entry_safe(wusb_dev, wusb_dev_next, &rekey_list,
- rekey_node) {
- list_del_init(&wusb_dev->rekey_node);
- dev_dbg(&wusb_dev->usb_dev->dev,
- "%s: rekey device at port %d\n",
- __func__, wusb_dev->port_idx);
-
- if (wusb_dev_set_gtk(wusbhc, wusb_dev) < 0) {
- dev_err(&wusb_dev->usb_dev->dev,
- "%s: rekey device at port %d failed\n",
- __func__, wusb_dev->port_idx);
- }
- wusb_dev_put(wusb_dev);
- }
-
- /* Switch the host controller to use the new GTK. */
- mutex_lock(&wusbhc->mutex);
- wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid,
- &wusbhc->gtk.descr.bKeyData, key_size);
- mutex_unlock(&wusbhc->mutex);
-}
-
-/**
- * wusbhc_gtk_rekey - generate and distribute a new GTK
- * @wusbhc: the WUSB host controller
- *
- * Generate a new GTK and distribute it to all connected and
- * authenticated devices. When all devices have the new GTK, the host
- * starts using it.
- *
- * This must be called after every device disconnect (see [WUSB]
- * section 6.2.11.2).
- */
-void wusbhc_gtk_rekey(struct wusbhc *wusbhc)
-{
- /*
- * We need to submit a URB to the downstream WUSB devices in order to
- * change the group key. This can't be done while holding the
- * wusbhc->mutex since that is also taken in the urb_enqueue routine
- * and will cause a deadlock. Instead, queue a work item to do
- * it when the lock is not held
- */
- queue_work(wusbhc->wq_security, &wusbhc->gtk_rekey_work);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wire Adapter Host Controller Driver
- * Common items to HWA and DWA based HCDs
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- */
-#include <linux/slab.h>
-#include <linux/module.h>
-#include "wusbhc.h"
-#include "wa-hc.h"
-
-/**
- * Assumes
- *
- * wa->usb_dev and wa->usb_iface initialized and refcounted,
- * wa->wa_descr initialized.
- */
-int wa_create(struct wahc *wa, struct usb_interface *iface,
- kernel_ulong_t quirks)
-{
- int result;
- struct device *dev = &iface->dev;
-
- if (iface->cur_altsetting->desc.bNumEndpoints < 3)
- return -ENODEV;
-
- result = wa_rpipes_create(wa);
- if (result < 0)
- goto error_rpipes_create;
- wa->quirks = quirks;
- /* Fill up Data Transfer EP pointers */
- wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc;
- wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc;
- wa->dti_buf_size = usb_endpoint_maxp(wa->dti_epd);
- wa->dti_buf = kmalloc(wa->dti_buf_size, GFP_KERNEL);
- if (wa->dti_buf == NULL) {
- result = -ENOMEM;
- goto error_dti_buf_alloc;
- }
- result = wa_nep_create(wa, iface);
- if (result < 0) {
- dev_err(dev, "WA-CDS: can't initialize notif endpoint: %d\n",
- result);
- goto error_nep_create;
- }
- return 0;
-
-error_nep_create:
- kfree(wa->dti_buf);
-error_dti_buf_alloc:
- wa_rpipes_destroy(wa);
-error_rpipes_create:
- return result;
-}
-EXPORT_SYMBOL_GPL(wa_create);
-
-
-void __wa_destroy(struct wahc *wa)
-{
- if (wa->dti_urb) {
- usb_kill_urb(wa->dti_urb);
- usb_put_urb(wa->dti_urb);
- }
- kfree(wa->dti_buf);
- wa_nep_destroy(wa);
- wa_rpipes_destroy(wa);
-}
-EXPORT_SYMBOL_GPL(__wa_destroy);
-
-/**
- * wa_reset_all - reset the WA device
- * @wa: the WA to be reset
- *
- * For HWAs the radio controller and all other PALs are also reset.
- */
-void wa_reset_all(struct wahc *wa)
-{
- /* FIXME: assuming HWA. */
- wusbhc_reset_all(wa->wusb);
-}
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("Wireless USB Wire Adapter core");
-MODULE_LICENSE("GPL");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * HWA Host Controller Driver
- * Wire Adapter Control/Data Streaming Iface (WUSB1.0[8])
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This driver implements a USB Host Controller (struct usb_hcd) for a
- * Wireless USB Host Controller based on the Wireless USB 1.0
- * Host-Wire-Adapter specification (in layman terms, a USB-dongle that
- * implements a Wireless USB host).
- *
- * Check out the Design-overview.txt file in the source documentation
- * for other details on the implementation.
- *
- * Main blocks:
- *
- * driver glue with the driver API, workqueue daemon
- *
- * lc RC instance life cycle management (create, destroy...)
- *
- * hcd glue with the USB API Host Controller Interface API.
- *
- * nep Notification EndPoint management: collect notifications
- * and queue them with the workqueue daemon.
- *
- * Handle notifications as coming from the NEP. Sends them
- * off others to their respective modules (eg: connect,
- * disconnect and reset go to devconnect).
- *
- * rpipe Remote Pipe management; rpipe is what we use to write
- * to an endpoint on a WUSB device that is connected to a
- * HWA RC.
- *
- * xfer Transfer management -- this is all the code that gets a
- * buffer and pushes it to a device (or viceversa). *
- *
- * Some day a lot of this code will be shared between this driver and
- * the drivers for DWA (xfer, rpipe).
- *
- * All starts at driver.c:hwahc_probe(), when one of this guys is
- * connected. hwahc_disconnect() stops it.
- *
- * During operation, the main driver is devices connecting or
- * disconnecting. They cause the HWA RC to send notifications into
- * nep.c:hwahc_nep_cb() that will dispatch them to
- * notif.c:wa_notif_dispatch(). From there they will fan to cause
- * device connects, disconnects, etc.
- *
- * Note much of the activity is difficult to follow. For example a
- * device connect goes to devconnect, which will cause the "fake" root
- * hub port to show a connect and stop there. Then hub_wq will notice
- * and call into the rh.c:hwahc_rc_port_reset() code to authenticate
- * the device (and this might require user intervention) and enable
- * the port.
- *
- * We also have a timer workqueue going from devconnect.c that
- * schedules in hwahc_devconnect_create().
- *
- * The rest of the traffic is in the usual entry points of a USB HCD,
- * which are hooked up in driver.c:hwahc_rc_driver, and defined in
- * hcd.c.
- */
-
-#ifndef __HWAHC_INTERNAL_H__
-#define __HWAHC_INTERNAL_H__
-
-#include <linux/completion.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include "../uwb/uwb.h"
-#include "include/wusb.h"
-#include "include/wusb-wa.h"
-
-struct wusbhc;
-struct wahc;
-extern void wa_urb_enqueue_run(struct work_struct *ws);
-extern void wa_process_errored_transfers_run(struct work_struct *ws);
-
-/**
- * RPipe instance
- *
- * @descr's fields are kept in LE, as we need to send it back and
- * forth.
- *
- * @wa is referenced when set
- *
- * @segs_available is the number of requests segments that still can
- * be submitted to the controller without overloading
- * it. It is initialized to descr->wRequests when
- * aiming.
- *
- * A rpipe supports a max of descr->wRequests at the same time; before
- * submitting seg_lock has to be taken. If segs_avail > 0, then we can
- * submit; if not, we have to queue them.
- */
-struct wa_rpipe {
- struct kref refcnt;
- struct usb_rpipe_descriptor descr;
- struct usb_host_endpoint *ep;
- struct wahc *wa;
- spinlock_t seg_lock;
- struct list_head seg_list;
- struct list_head list_node;
- atomic_t segs_available;
- u8 buffer[1]; /* For reads/writes on USB */
-};
-
-
-enum wa_dti_state {
- WA_DTI_TRANSFER_RESULT_PENDING,
- WA_DTI_ISOC_PACKET_STATUS_PENDING,
- WA_DTI_BUF_IN_DATA_PENDING
-};
-
-enum wa_quirks {
- /*
- * The Alereon HWA expects the data frames in isochronous transfer
- * requests to be concatenated and not sent as separate packets.
- */
- WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC = 0x01,
- /*
- * The Alereon HWA can be instructed to not send transfer notifications
- * as an optimization.
- */
- WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS = 0x02,
-};
-
-enum wa_vendor_specific_requests {
- WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS = 0x4C,
- WA_REQ_ALEREON_FEATURE_SET = 0x01,
- WA_REQ_ALEREON_FEATURE_CLEAR = 0x00,
-};
-
-#define WA_MAX_BUF_IN_URBS 4
-/**
- * Instance of a HWA Host Controller
- *
- * Except where a more specific lock/mutex applies or atomic, all
- * fields protected by @mutex.
- *
- * @wa_descr Can be accessed without locking because it is in
- * the same area where the device descriptors were
- * read, so it is guaranteed to exist unmodified while
- * the device exists.
- *
- * Endianess has been converted to CPU's.
- *
- * @nep_* can be accessed without locking as its processing is
- * serialized; we submit a NEP URB and it comes to
- * hwahc_nep_cb(), which won't issue another URB until it is
- * done processing it.
- *
- * @xfer_list:
- *
- * List of active transfers to verify existence from a xfer id
- * gotten from the xfer result message. Can't use urb->list because
- * it goes by endpoint, and we don't know the endpoint at the time
- * when we get the xfer result message. We can't really rely on the
- * pointer (will have to change for 64 bits) as the xfer id is 32 bits.
- *
- * @xfer_delayed_list: List of transfers that need to be started
- * (with a workqueue, because they were
- * submitted from an atomic context).
- *
- * FIXME: this needs to be layered up: a wusbhc layer (for sharing
- * commonalities with WHCI), a wa layer (for sharing
- * commonalities with DWA-RC).
- */
-struct wahc {
- struct usb_device *usb_dev;
- struct usb_interface *usb_iface;
-
- /* HC to deliver notifications */
- union {
- struct wusbhc *wusb;
- struct dwahc *dwa;
- };
-
- const struct usb_endpoint_descriptor *dto_epd, *dti_epd;
- const struct usb_wa_descriptor *wa_descr;
-
- struct urb *nep_urb; /* Notification EndPoint [lockless] */
- struct edc nep_edc;
- void *nep_buffer;
- size_t nep_buffer_size;
-
- atomic_t notifs_queued;
-
- u16 rpipes;
- unsigned long *rpipe_bm; /* rpipe usage bitmap */
- struct list_head rpipe_delayed_list; /* delayed RPIPES. */
- spinlock_t rpipe_lock; /* protect rpipe_bm and delayed list */
- struct mutex rpipe_mutex; /* assigning resources to endpoints */
-
- /*
- * dti_state is used to track the state of the dti_urb. When dti_state
- * is WA_DTI_ISOC_PACKET_STATUS_PENDING, dti_isoc_xfer_in_progress and
- * dti_isoc_xfer_seg identify which xfer the incoming isoc packet
- * status refers to.
- */
- enum wa_dti_state dti_state;
- u32 dti_isoc_xfer_in_progress;
- u8 dti_isoc_xfer_seg;
- struct urb *dti_urb; /* URB for reading xfer results */
- /* URBs for reading data in */
- struct urb buf_in_urbs[WA_MAX_BUF_IN_URBS];
- int active_buf_in_urbs; /* number of buf_in_urbs active. */
- struct edc dti_edc; /* DTI error density counter */
- void *dti_buf;
- size_t dti_buf_size;
-
- unsigned long dto_in_use; /* protect dto endoint serialization */
-
- s32 status; /* For reading status */
-
- struct list_head xfer_list;
- struct list_head xfer_delayed_list;
- struct list_head xfer_errored_list;
- /*
- * lock for the above xfer lists. Can be taken while a xfer->lock is
- * held but not in the reverse order.
- */
- spinlock_t xfer_list_lock;
- struct work_struct xfer_enqueue_work;
- struct work_struct xfer_error_work;
- atomic_t xfer_id_count;
-
- kernel_ulong_t quirks;
-};
-
-
-extern int wa_create(struct wahc *wa, struct usb_interface *iface,
- kernel_ulong_t);
-extern void __wa_destroy(struct wahc *wa);
-extern int wa_dti_start(struct wahc *wa);
-void wa_reset_all(struct wahc *wa);
-
-
-/* Miscellaneous constants */
-enum {
- /** Max number of EPROTO errors we tolerate on the NEP in a
- * period of time */
- HWAHC_EPROTO_MAX = 16,
- /** Period of time for EPROTO errors (in jiffies) */
- HWAHC_EPROTO_PERIOD = 4 * HZ,
-};
-
-
-/* Notification endpoint handling */
-extern int wa_nep_create(struct wahc *, struct usb_interface *);
-extern void wa_nep_destroy(struct wahc *);
-
-static inline int wa_nep_arm(struct wahc *wa, gfp_t gfp_mask)
-{
- struct urb *urb = wa->nep_urb;
- urb->transfer_buffer = wa->nep_buffer;
- urb->transfer_buffer_length = wa->nep_buffer_size;
- return usb_submit_urb(urb, gfp_mask);
-}
-
-static inline void wa_nep_disarm(struct wahc *wa)
-{
- usb_kill_urb(wa->nep_urb);
-}
-
-
-/* RPipes */
-static inline void wa_rpipe_init(struct wahc *wa)
-{
- INIT_LIST_HEAD(&wa->rpipe_delayed_list);
- spin_lock_init(&wa->rpipe_lock);
- mutex_init(&wa->rpipe_mutex);
-}
-
-static inline void wa_init(struct wahc *wa)
-{
- int index;
-
- edc_init(&wa->nep_edc);
- atomic_set(&wa->notifs_queued, 0);
- wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING;
- wa_rpipe_init(wa);
- edc_init(&wa->dti_edc);
- INIT_LIST_HEAD(&wa->xfer_list);
- INIT_LIST_HEAD(&wa->xfer_delayed_list);
- INIT_LIST_HEAD(&wa->xfer_errored_list);
- spin_lock_init(&wa->xfer_list_lock);
- INIT_WORK(&wa->xfer_enqueue_work, wa_urb_enqueue_run);
- INIT_WORK(&wa->xfer_error_work, wa_process_errored_transfers_run);
- wa->dto_in_use = 0;
- atomic_set(&wa->xfer_id_count, 1);
- /* init the buf in URBs */
- for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index)
- usb_init_urb(&(wa->buf_in_urbs[index]));
- wa->active_buf_in_urbs = 0;
-}
-
-/**
- * Destroy a pipe (when refcount drops to zero)
- *
- * Assumes it has been moved to the "QUIESCING" state.
- */
-struct wa_xfer;
-extern void rpipe_destroy(struct kref *_rpipe);
-static inline
-void __rpipe_get(struct wa_rpipe *rpipe)
-{
- kref_get(&rpipe->refcnt);
-}
-extern int rpipe_get_by_ep(struct wahc *, struct usb_host_endpoint *,
- struct urb *, gfp_t);
-static inline void rpipe_put(struct wa_rpipe *rpipe)
-{
- kref_put(&rpipe->refcnt, rpipe_destroy);
-
-}
-extern void rpipe_ep_disable(struct wahc *, struct usb_host_endpoint *);
-extern void rpipe_clear_feature_stalled(struct wahc *,
- struct usb_host_endpoint *);
-extern int wa_rpipes_create(struct wahc *);
-extern void wa_rpipes_destroy(struct wahc *);
-static inline void rpipe_avail_dec(struct wa_rpipe *rpipe)
-{
- atomic_dec(&rpipe->segs_available);
-}
-
-/**
- * Returns true if the rpipe is ready to submit more segments.
- */
-static inline int rpipe_avail_inc(struct wa_rpipe *rpipe)
-{
- return atomic_inc_return(&rpipe->segs_available) > 0
- && !list_empty(&rpipe->seg_list);
-}
-
-
-/* Transferring data */
-extern int wa_urb_enqueue(struct wahc *, struct usb_host_endpoint *,
- struct urb *, gfp_t);
-extern int wa_urb_dequeue(struct wahc *, struct urb *, int);
-extern void wa_handle_notif_xfer(struct wahc *, struct wa_notif_hdr *);
-
-
-/* Misc
- *
- * FIXME: Refcounting for the actual @hwahc object is not correct; I
- * mean, this should be refcounting on the HCD underneath, but
- * it is not. In any case, the semantics for HCD refcounting
- * are *weird*...on refcount reaching zero it just frees
- * it...no RC specific function is called...unless I miss
- * something.
- *
- * FIXME: has to go away in favour of a 'struct' hcd based solution
- */
-static inline struct wahc *wa_get(struct wahc *wa)
-{
- usb_get_intf(wa->usb_iface);
- return wa;
-}
-
-static inline void wa_put(struct wahc *wa)
-{
- usb_put_intf(wa->usb_iface);
-}
-
-
-static inline int __wa_feature(struct wahc *wa, unsigned op, u16 feature)
-{
- return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- op ? USB_REQ_SET_FEATURE : USB_REQ_CLEAR_FEATURE,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- feature,
- wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
-}
-
-
-static inline int __wa_set_feature(struct wahc *wa, u16 feature)
-{
- return __wa_feature(wa, 1, feature);
-}
-
-
-static inline int __wa_clear_feature(struct wahc *wa, u16 feature)
-{
- return __wa_feature(wa, 0, feature);
-}
-
-
-/**
- * Return the status of a Wire Adapter
- *
- * @wa: Wire Adapter instance
- * @returns < 0 errno code on error, or status bitmap as described
- * in WUSB1.0[8.3.1.6].
- *
- * NOTE: need malloc, some arches don't take USB from the stack
- */
-static inline
-s32 __wa_get_status(struct wahc *wa)
-{
- s32 result;
- result = usb_control_msg(
- wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0),
- USB_REQ_GET_STATUS,
- USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
- &wa->status, sizeof(wa->status), USB_CTRL_GET_TIMEOUT);
- if (result >= 0)
- result = wa->status;
- return result;
-}
-
-
-/**
- * Waits until the Wire Adapter's status matches @mask/@value
- *
- * @wa: Wire Adapter instance.
- * @returns < 0 errno code on error, otherwise status.
- *
- * Loop until the WAs status matches the mask and value (status & mask
- * == value). Timeout if it doesn't happen.
- *
- * FIXME: is there an official specification on how long status
- * changes can take?
- */
-static inline s32 __wa_wait_status(struct wahc *wa, u32 mask, u32 value)
-{
- s32 result;
- unsigned loops = 10;
- do {
- msleep(50);
- result = __wa_get_status(wa);
- if ((result & mask) == value)
- break;
- if (loops-- == 0) {
- result = -ETIMEDOUT;
- break;
- }
- } while (result >= 0);
- return result;
-}
-
-
-/** Command @hwahc to stop, @returns 0 if ok, < 0 errno code on error */
-static inline int __wa_stop(struct wahc *wa)
-{
- int result;
- struct device *dev = &wa->usb_iface->dev;
-
- result = __wa_clear_feature(wa, WA_ENABLE);
- if (result < 0 && result != -ENODEV) {
- dev_err(dev, "error commanding HC to stop: %d\n", result);
- goto out;
- }
- result = __wa_wait_status(wa, WA_ENABLE, 0);
- if (result < 0 && result != -ENODEV)
- dev_err(dev, "error waiting for HC to stop: %d\n", result);
-out:
- return 0;
-}
-
-
-#endif /* #ifndef __HWAHC_INTERNAL_H__ */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
- * Notification EndPoint support
- *
- * Copyright (C) 2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This part takes care of getting the notification from the hw
- * only and dispatching through wusbwad into
- * wa_notif_dispatch. Handling is done there.
- *
- * WA notifications are limited in size; most of them are three or
- * four bytes long, and the longest is the HWA Device Notification,
- * which would not exceed 38 bytes (DNs are limited in payload to 32
- * bytes plus 3 bytes header (WUSB1.0[7.6p2]), plus 3 bytes HWA
- * header (WUSB1.0[8.5.4.2]).
- *
- * It is not clear if more than one Device Notification can be packed
- * in a HWA Notification, I assume no because of the wording in
- * WUSB1.0[8.5.4.2]. In any case, the bigger any notification could
- * get is 256 bytes (as the bLength field is a byte).
- *
- * So what we do is we have this buffer and read into it; when a
- * notification arrives we schedule work to a specific, single thread
- * workqueue (so notifications are serialized) and copy the
- * notification data. After scheduling the work, we rearm the read from
- * the notification endpoint.
- *
- * Entry points here are:
- *
- * wa_nep_[create|destroy]() To initialize/release this subsystem
- *
- * wa_nep_cb() Callback for the notification
- * endpoint; when data is ready, this
- * does the dispatching.
- */
-#include <linux/workqueue.h>
-#include <linux/ctype.h>
-#include <linux/slab.h>
-
-#include "wa-hc.h"
-#include "wusbhc.h"
-
-/* Structure for queueing notifications to the workqueue */
-struct wa_notif_work {
- struct work_struct work;
- struct wahc *wa;
- size_t size;
- u8 data[];
-};
-
-/*
- * Process incoming notifications from the WA's Notification EndPoint
- * [the wuswad daemon, basically]
- *
- * @_nw: Pointer to a descriptor which has the pointer to the
- * @wa, the size of the buffer and the work queue
- * structure (so we can free all when done).
- * @returns 0 if ok, < 0 errno code on error.
- *
- * All notifications follow the same format; they need to start with a
- * 'struct wa_notif_hdr' header, so it is easy to parse through
- * them. We just break the buffer in individual notifications (the
- * standard doesn't say if it can be done or is forbidden, so we are
- * cautious) and dispatch each.
- *
- * So the handling layers are is:
- *
- * WA specific notification (from NEP)
- * Device Notification Received -> wa_handle_notif_dn()
- * WUSB Device notification generic handling
- * BPST Adjustment -> wa_handle_notif_bpst_adj()
- * ... -> ...
- *
- * @wa has to be referenced
- */
-static void wa_notif_dispatch(struct work_struct *ws)
-{
- void *itr;
- u8 missing = 0;
- struct wa_notif_work *nw = container_of(ws, struct wa_notif_work,
- work);
- struct wahc *wa = nw->wa;
- struct wa_notif_hdr *notif_hdr;
- size_t size;
-
- struct device *dev = &wa->usb_iface->dev;
-
-#if 0
- /* FIXME: need to check for this??? */
- if (usb_hcd->state == HC_STATE_QUIESCING) /* Going down? */
- goto out; /* screw it */
-#endif
- atomic_dec(&wa->notifs_queued); /* Throttling ctl */
- size = nw->size;
- itr = nw->data;
-
- while (size) {
- if (size < sizeof(*notif_hdr)) {
- missing = sizeof(*notif_hdr) - size;
- goto exhausted_buffer;
- }
- notif_hdr = itr;
- if (size < notif_hdr->bLength)
- goto exhausted_buffer;
- itr += notif_hdr->bLength;
- size -= notif_hdr->bLength;
- /* Dispatch the notification [don't use itr or size!] */
- switch (notif_hdr->bNotifyType) {
- case HWA_NOTIF_DN: {
- struct hwa_notif_dn *hwa_dn;
- hwa_dn = container_of(notif_hdr, struct hwa_notif_dn,
- hdr);
- wusbhc_handle_dn(wa->wusb, hwa_dn->bSourceDeviceAddr,
- hwa_dn->dndata,
- notif_hdr->bLength - sizeof(*hwa_dn));
- break;
- }
- case WA_NOTIF_TRANSFER:
- wa_handle_notif_xfer(wa, notif_hdr);
- break;
- case HWA_NOTIF_BPST_ADJ:
- break; /* no action needed for BPST ADJ. */
- case DWA_NOTIF_RWAKE:
- case DWA_NOTIF_PORTSTATUS:
- /* FIXME: unimplemented WA NOTIFs */
- /* fallthru */
- default:
- dev_err(dev, "HWA: unknown notification 0x%x, "
- "%zu bytes; discarding\n",
- notif_hdr->bNotifyType,
- (size_t)notif_hdr->bLength);
- break;
- }
- }
-out:
- wa_put(wa);
- kfree(nw);
- return;
-
- /* THIS SHOULD NOT HAPPEN
- *
- * Buffer exahusted with partial data remaining; just warn and
- * discard the data, as this should not happen.
- */
-exhausted_buffer:
- dev_warn(dev, "HWA: device sent short notification, "
- "%d bytes missing; discarding %d bytes.\n",
- missing, (int)size);
- goto out;
-}
-
-/*
- * Deliver incoming WA notifications to the wusbwa workqueue
- *
- * @wa: Pointer the Wire Adapter Controller Data Streaming
- * instance (part of an 'struct usb_hcd').
- * @size: Size of the received buffer
- * @returns 0 if ok, < 0 errno code on error.
- *
- * The input buffer is @wa->nep_buffer, with @size bytes
- * (guaranteed to fit in the allocated space,
- * @wa->nep_buffer_size).
- */
-static int wa_nep_queue(struct wahc *wa, size_t size)
-{
- int result = 0;
- struct device *dev = &wa->usb_iface->dev;
- struct wa_notif_work *nw;
-
- /* dev_fnstart(dev, "(wa %p, size %zu)\n", wa, size); */
- BUG_ON(size > wa->nep_buffer_size);
- if (size == 0)
- goto out;
- if (atomic_read(&wa->notifs_queued) > 200) {
- if (printk_ratelimit())
- dev_err(dev, "Too many notifications queued, "
- "throttling back\n");
- goto out;
- }
- nw = kzalloc(sizeof(*nw) + size, GFP_ATOMIC);
- if (nw == NULL) {
- if (printk_ratelimit())
- dev_err(dev, "No memory to queue notification\n");
- result = -ENOMEM;
- goto out;
- }
- INIT_WORK(&nw->work, wa_notif_dispatch);
- nw->wa = wa_get(wa);
- nw->size = size;
- memcpy(nw->data, wa->nep_buffer, size);
- atomic_inc(&wa->notifs_queued); /* Throttling ctl */
- queue_work(wusbd, &nw->work);
-out:
- /* dev_fnend(dev, "(wa %p, size %zu) = result\n", wa, size, result); */
- return result;
-}
-
-/*
- * Callback for the notification event endpoint
- *
- * Check's that everything is fine and then passes the data to be
- * queued to the workqueue.
- */
-static void wa_nep_cb(struct urb *urb)
-{
- int result;
- struct wahc *wa = urb->context;
- struct device *dev = &wa->usb_iface->dev;
-
- switch (result = urb->status) {
- case 0:
- result = wa_nep_queue(wa, urb->actual_length);
- if (result < 0)
- dev_err(dev, "NEP: unable to process notification(s): "
- "%d\n", result);
- break;
- case -ECONNRESET: /* Not an error, but a controlled situation; */
- case -ENOENT: /* (we killed the URB)...so, no broadcast */
- case -ESHUTDOWN:
- dev_dbg(dev, "NEP: going down %d\n", urb->status);
- goto out;
- default: /* On general errors, we retry unless it gets ugly */
- if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
- EDC_ERROR_TIMEFRAME)) {
- dev_err(dev, "NEP: URB max acceptable errors "
- "exceeded, resetting device\n");
- wa_reset_all(wa);
- goto out;
- }
- dev_err(dev, "NEP: URB error %d\n", urb->status);
- }
- result = wa_nep_arm(wa, GFP_ATOMIC);
- if (result < 0) {
- dev_err(dev, "NEP: cannot submit URB: %d\n", result);
- wa_reset_all(wa);
- }
-out:
- return;
-}
-
-/*
- * Initialize @wa's notification and event's endpoint stuff
- *
- * This includes the allocating the read buffer, the context ID
- * allocation bitmap, the URB and submitting the URB.
- */
-int wa_nep_create(struct wahc *wa, struct usb_interface *iface)
-{
- int result;
- struct usb_endpoint_descriptor *epd;
- struct usb_device *usb_dev = interface_to_usbdev(iface);
- struct device *dev = &iface->dev;
-
- edc_init(&wa->nep_edc);
- epd = &iface->cur_altsetting->endpoint[0].desc;
- wa->nep_buffer_size = 1024;
- wa->nep_buffer = kmalloc(wa->nep_buffer_size, GFP_KERNEL);
- if (!wa->nep_buffer)
- goto error_nep_buffer;
- wa->nep_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (wa->nep_urb == NULL)
- goto error_urb_alloc;
- usb_fill_int_urb(wa->nep_urb, usb_dev,
- usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
- wa->nep_buffer, wa->nep_buffer_size,
- wa_nep_cb, wa, epd->bInterval);
- result = wa_nep_arm(wa, GFP_KERNEL);
- if (result < 0) {
- dev_err(dev, "Cannot submit notification URB: %d\n", result);
- goto error_nep_arm;
- }
- return 0;
-
-error_nep_arm:
- usb_free_urb(wa->nep_urb);
-error_urb_alloc:
- kfree(wa->nep_buffer);
-error_nep_buffer:
- return -ENOMEM;
-}
-
-void wa_nep_destroy(struct wahc *wa)
-{
- wa_nep_disarm(wa);
- usb_free_urb(wa->nep_urb);
- kfree(wa->nep_buffer);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * WUSB Wire Adapter
- * rpipe management
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * FIXME: docs
- *
- * RPIPE
- *
- * Targeted at different downstream endpoints
- *
- * Descriptor: use to config the remote pipe.
- *
- * The number of blocks could be dynamic (wBlocks in descriptor is
- * 0)--need to schedule them then.
- *
- * Each bit in wa->rpipe_bm represents if an rpipe is being used or
- * not. Rpipes are represented with a 'struct wa_rpipe' that is
- * attached to the hcpriv member of a 'struct usb_host_endpoint'.
- *
- * When you need to xfer data to an endpoint, you get an rpipe for it
- * with wa_ep_rpipe_get(), which gives you a reference to the rpipe
- * and keeps a single one (the first one) with the endpoint. When you
- * are done transferring, you drop that reference. At the end the
- * rpipe is always allocated and bound to the endpoint. There it might
- * be recycled when not used.
- *
- * Addresses:
- *
- * We use a 1:1 mapping mechanism between port address (0 based
- * index, actually) and the address. The USB stack knows about this.
- *
- * USB Stack port number 4 (1 based)
- * WUSB code port index 3 (0 based)
- * USB Address 5 (2 based -- 0 is for default, 1 for root hub)
- *
- * Now, because we don't use the concept as default address exactly
- * like the (wired) USB code does, we need to kind of skip it. So we
- * never take addresses from the urb->pipe, but from the
- * urb->dev->devnum, to make sure that we always have the right
- * destination address.
- */
-#include <linux/atomic.h>
-#include <linux/bitmap.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include "wusbhc.h"
-#include "wa-hc.h"
-
-static int __rpipe_get_descr(struct wahc *wa,
- struct usb_rpipe_descriptor *descr, u16 index)
-{
- ssize_t result;
- struct device *dev = &wa->usb_iface->dev;
-
- /* Get the RPIPE descriptor -- we cannot use the usb_get_descriptor()
- * function because the arguments are different.
- */
- result = usb_control_msg(
- wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0),
- USB_REQ_GET_DESCRIPTOR,
- USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_RPIPE,
- USB_DT_RPIPE<<8, index, descr, sizeof(*descr),
- USB_CTRL_GET_TIMEOUT);
- if (result < 0) {
- dev_err(dev, "rpipe %u: get descriptor failed: %d\n",
- index, (int)result);
- goto error;
- }
- if (result < sizeof(*descr)) {
- dev_err(dev, "rpipe %u: got short descriptor "
- "(%zd vs %zd bytes needed)\n",
- index, result, sizeof(*descr));
- result = -EINVAL;
- goto error;
- }
- result = 0;
-
-error:
- return result;
-}
-
-/*
- *
- * The descriptor is assumed to be properly initialized (ie: you got
- * it through __rpipe_get_descr()).
- */
-static int __rpipe_set_descr(struct wahc *wa,
- struct usb_rpipe_descriptor *descr, u16 index)
-{
- ssize_t result;
- struct device *dev = &wa->usb_iface->dev;
-
- /* we cannot use the usb_get_descriptor() function because the
- * arguments are different.
- */
- result = usb_control_msg(
- wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- USB_REQ_SET_DESCRIPTOR,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
- USB_DT_RPIPE<<8, index, descr, sizeof(*descr),
- USB_CTRL_SET_TIMEOUT);
- if (result < 0) {
- dev_err(dev, "rpipe %u: set descriptor failed: %d\n",
- index, (int)result);
- goto error;
- }
- if (result < sizeof(*descr)) {
- dev_err(dev, "rpipe %u: sent short descriptor "
- "(%zd vs %zd bytes required)\n",
- index, result, sizeof(*descr));
- result = -EINVAL;
- goto error;
- }
- result = 0;
-
-error:
- return result;
-
-}
-
-static void rpipe_init(struct wa_rpipe *rpipe)
-{
- kref_init(&rpipe->refcnt);
- spin_lock_init(&rpipe->seg_lock);
- INIT_LIST_HEAD(&rpipe->seg_list);
- INIT_LIST_HEAD(&rpipe->list_node);
-}
-
-static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&wa->rpipe_lock, flags);
- rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx);
- if (rpipe_idx < wa->rpipes)
- set_bit(rpipe_idx, wa->rpipe_bm);
- spin_unlock_irqrestore(&wa->rpipe_lock, flags);
-
- return rpipe_idx;
-}
-
-static void rpipe_put_idx(struct wahc *wa, unsigned rpipe_idx)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&wa->rpipe_lock, flags);
- clear_bit(rpipe_idx, wa->rpipe_bm);
- spin_unlock_irqrestore(&wa->rpipe_lock, flags);
-}
-
-void rpipe_destroy(struct kref *_rpipe)
-{
- struct wa_rpipe *rpipe = container_of(_rpipe, struct wa_rpipe, refcnt);
- u8 index = le16_to_cpu(rpipe->descr.wRPipeIndex);
-
- if (rpipe->ep)
- rpipe->ep->hcpriv = NULL;
- rpipe_put_idx(rpipe->wa, index);
- wa_put(rpipe->wa);
- kfree(rpipe);
-}
-EXPORT_SYMBOL_GPL(rpipe_destroy);
-
-/*
- * Locate an idle rpipe, create an structure for it and return it
- *
- * @wa is referenced and unlocked
- * @crs enum rpipe_attr, required endpoint characteristics
- *
- * The rpipe can be used only sequentially (not in parallel).
- *
- * The rpipe is moved into the "ready" state.
- */
-static int rpipe_get_idle(struct wa_rpipe **prpipe, struct wahc *wa, u8 crs,
- gfp_t gfp)
-{
- int result;
- unsigned rpipe_idx;
- struct wa_rpipe *rpipe;
- struct device *dev = &wa->usb_iface->dev;
-
- rpipe = kzalloc(sizeof(*rpipe), gfp);
- if (rpipe == NULL)
- return -ENOMEM;
- rpipe_init(rpipe);
-
- /* Look for an idle pipe */
- for (rpipe_idx = 0; rpipe_idx < wa->rpipes; rpipe_idx++) {
- rpipe_idx = rpipe_get_idx(wa, rpipe_idx);
- if (rpipe_idx >= wa->rpipes) /* no more pipes :( */
- break;
- result = __rpipe_get_descr(wa, &rpipe->descr, rpipe_idx);
- if (result < 0)
- dev_err(dev, "Can't get descriptor for rpipe %u: %d\n",
- rpipe_idx, result);
- else if ((rpipe->descr.bmCharacteristics & crs) != 0)
- goto found;
- rpipe_put_idx(wa, rpipe_idx);
- }
- *prpipe = NULL;
- kfree(rpipe);
- return -ENXIO;
-
-found:
- set_bit(rpipe_idx, wa->rpipe_bm);
- rpipe->wa = wa_get(wa);
- *prpipe = rpipe;
- return 0;
-}
-
-static int __rpipe_reset(struct wahc *wa, unsigned index)
-{
- int result;
- struct device *dev = &wa->usb_iface->dev;
-
- result = usb_control_msg(
- wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- USB_REQ_RPIPE_RESET,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
- 0, index, NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (result < 0)
- dev_err(dev, "rpipe %u: reset failed: %d\n",
- index, result);
- return result;
-}
-
-/*
- * Fake companion descriptor for ep0
- *
- * See WUSB1.0[7.4.4], most of this is zero for bulk/int/ctl
- */
-static struct usb_wireless_ep_comp_descriptor epc0 = {
- .bLength = sizeof(epc0),
- .bDescriptorType = USB_DT_WIRELESS_ENDPOINT_COMP,
- .bMaxBurst = 1,
- .bMaxSequence = 2,
-};
-
-/*
- * Look for EP companion descriptor
- *
- * Get there, look for Inara in the endpoint's extra descriptors
- */
-static struct usb_wireless_ep_comp_descriptor *rpipe_epc_find(
- struct device *dev, struct usb_host_endpoint *ep)
-{
- void *itr;
- size_t itr_size;
- struct usb_descriptor_header *hdr;
- struct usb_wireless_ep_comp_descriptor *epcd;
-
- if (ep->desc.bEndpointAddress == 0) {
- epcd = &epc0;
- goto out;
- }
- itr = ep->extra;
- itr_size = ep->extralen;
- epcd = NULL;
- while (itr_size > 0) {
- if (itr_size < sizeof(*hdr)) {
- dev_err(dev, "HW Bug? ep 0x%02x: extra descriptors "
- "at offset %zu: only %zu bytes left\n",
- ep->desc.bEndpointAddress,
- itr - (void *) ep->extra, itr_size);
- break;
- }
- hdr = itr;
- if (hdr->bDescriptorType == USB_DT_WIRELESS_ENDPOINT_COMP) {
- epcd = itr;
- break;
- }
- if (hdr->bLength > itr_size) {
- dev_err(dev, "HW Bug? ep 0x%02x: extra descriptor "
- "at offset %zu (type 0x%02x) "
- "length %d but only %zu bytes left\n",
- ep->desc.bEndpointAddress,
- itr - (void *) ep->extra, hdr->bDescriptorType,
- hdr->bLength, itr_size);
- break;
- }
- itr += hdr->bLength;
- itr_size -= hdr->bLength;
- }
-out:
- return epcd;
-}
-
-/*
- * Aim an rpipe to its device & endpoint destination
- *
- * Make sure we change the address to unauthenticated if the device
- * is WUSB and it is not authenticated.
- */
-static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa,
- struct usb_host_endpoint *ep, struct urb *urb, gfp_t gfp)
-{
- int result = -ENOMSG; /* better code for lack of companion? */
- struct device *dev = &wa->usb_iface->dev;
- struct usb_device *usb_dev = urb->dev;
- struct usb_wireless_ep_comp_descriptor *epcd;
- u32 ack_window, epcd_max_sequence;
- u8 unauth;
-
- epcd = rpipe_epc_find(dev, ep);
- if (epcd == NULL) {
- dev_err(dev, "ep 0x%02x: can't find companion descriptor\n",
- ep->desc.bEndpointAddress);
- goto error;
- }
- unauth = usb_dev->wusb && !usb_dev->authenticated ? 0x80 : 0;
- __rpipe_reset(wa, le16_to_cpu(rpipe->descr.wRPipeIndex));
- atomic_set(&rpipe->segs_available,
- le16_to_cpu(rpipe->descr.wRequests));
- /* FIXME: block allocation system; request with queuing and timeout */
- /* FIXME: compute so seg_size > ep->maxpktsize */
- rpipe->descr.wBlocks = cpu_to_le16(16); /* given */
- /* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */
- if (usb_endpoint_xfer_isoc(&ep->desc))
- rpipe->descr.wMaxPacketSize = epcd->wOverTheAirPacketSize;
- else
- rpipe->descr.wMaxPacketSize = ep->desc.wMaxPacketSize;
-
- rpipe->descr.hwa_bMaxBurst = max(min_t(unsigned int,
- epcd->bMaxBurst, 16U), 1U);
- rpipe->descr.hwa_bDeviceInfoIndex =
- wusb_port_no_to_idx(urb->dev->portnum);
- /* FIXME: use maximum speed as supported or recommended by device */
- rpipe->descr.bSpeed = usb_pipeendpoint(urb->pipe) == 0 ?
- UWB_PHY_RATE_53 : UWB_PHY_RATE_200;
-
- dev_dbg(dev, "addr %u (0x%02x) rpipe #%u ep# %u speed %d\n",
- urb->dev->devnum, urb->dev->devnum | unauth,
- le16_to_cpu(rpipe->descr.wRPipeIndex),
- usb_pipeendpoint(urb->pipe), rpipe->descr.bSpeed);
-
- rpipe->descr.hwa_reserved = 0;
-
- rpipe->descr.bEndpointAddress = ep->desc.bEndpointAddress;
- /* FIXME: bDataSequence */
- rpipe->descr.bDataSequence = 0;
-
- /* start with base window of hwa_bMaxBurst bits starting at 0. */
- ack_window = 0xFFFFFFFF >> (32 - rpipe->descr.hwa_bMaxBurst);
- rpipe->descr.dwCurrentWindow = cpu_to_le32(ack_window);
- epcd_max_sequence = max(min_t(unsigned int,
- epcd->bMaxSequence, 32U), 2U);
- rpipe->descr.bMaxDataSequence = epcd_max_sequence - 1;
- rpipe->descr.bInterval = ep->desc.bInterval;
- if (usb_endpoint_xfer_isoc(&ep->desc))
- rpipe->descr.bOverTheAirInterval = epcd->bOverTheAirInterval;
- else
- rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */
- /* FIXME: xmit power & preamble blah blah */
- rpipe->descr.bmAttribute = (ep->desc.bmAttributes &
- USB_ENDPOINT_XFERTYPE_MASK);
- /* rpipe->descr.bmCharacteristics RO */
- rpipe->descr.bmRetryOptions = (wa->wusb->retry_count & 0xF);
- /* FIXME: use for assessing link quality? */
- rpipe->descr.wNumTransactionErrors = 0;
- result = __rpipe_set_descr(wa, &rpipe->descr,
- le16_to_cpu(rpipe->descr.wRPipeIndex));
- if (result < 0) {
- dev_err(dev, "Cannot aim rpipe: %d\n", result);
- goto error;
- }
- result = 0;
-error:
- return result;
-}
-
-/*
- * Check an aimed rpipe to make sure it points to where we want
- *
- * We use bit 19 of the Linux USB pipe bitmap for unauth vs auth
- * space; when it is like that, we or 0x80 to make an unauth address.
- */
-static int rpipe_check_aim(const struct wa_rpipe *rpipe, const struct wahc *wa,
- const struct usb_host_endpoint *ep,
- const struct urb *urb, gfp_t gfp)
-{
- int result = 0;
- struct device *dev = &wa->usb_iface->dev;
- u8 portnum = wusb_port_no_to_idx(urb->dev->portnum);
-
-#define AIM_CHECK(rdf, val, text) \
- do { \
- if (rpipe->descr.rdf != (val)) { \
- dev_err(dev, \
- "rpipe aim discrepancy: " #rdf " " text "\n", \
- rpipe->descr.rdf, (val)); \
- result = -EINVAL; \
- WARN_ON(1); \
- } \
- } while (0)
- AIM_CHECK(hwa_bDeviceInfoIndex, portnum, "(%u vs %u)");
- AIM_CHECK(bSpeed, usb_pipeendpoint(urb->pipe) == 0 ?
- UWB_PHY_RATE_53 : UWB_PHY_RATE_200,
- "(%u vs %u)");
- AIM_CHECK(bEndpointAddress, ep->desc.bEndpointAddress, "(%u vs %u)");
- AIM_CHECK(bInterval, ep->desc.bInterval, "(%u vs %u)");
- AIM_CHECK(bmAttribute, ep->desc.bmAttributes & 0x03, "(%u vs %u)");
-#undef AIM_CHECK
- return result;
-}
-
-#ifndef CONFIG_BUG
-#define CONFIG_BUG 0
-#endif
-
-/*
- * Make sure there is an rpipe allocated for an endpoint
- *
- * If already allocated, we just refcount it; if not, we get an
- * idle one, aim it to the right location and take it.
- *
- * Attaches to ep->hcpriv and rpipe->ep to ep.
- */
-int rpipe_get_by_ep(struct wahc *wa, struct usb_host_endpoint *ep,
- struct urb *urb, gfp_t gfp)
-{
- int result = 0;
- struct device *dev = &wa->usb_iface->dev;
- struct wa_rpipe *rpipe;
- u8 eptype;
-
- mutex_lock(&wa->rpipe_mutex);
- rpipe = ep->hcpriv;
- if (rpipe != NULL) {
- if (CONFIG_BUG == 1) {
- result = rpipe_check_aim(rpipe, wa, ep, urb, gfp);
- if (result < 0)
- goto error;
- }
- __rpipe_get(rpipe);
- dev_dbg(dev, "ep 0x%02x: reusing rpipe %u\n",
- ep->desc.bEndpointAddress,
- le16_to_cpu(rpipe->descr.wRPipeIndex));
- } else {
- /* hmm, assign idle rpipe, aim it */
- result = -ENOBUFS;
- eptype = ep->desc.bmAttributes & 0x03;
- result = rpipe_get_idle(&rpipe, wa, 1 << eptype, gfp);
- if (result < 0)
- goto error;
- result = rpipe_aim(rpipe, wa, ep, urb, gfp);
- if (result < 0) {
- rpipe_put(rpipe);
- goto error;
- }
- ep->hcpriv = rpipe;
- rpipe->ep = ep;
- __rpipe_get(rpipe); /* for caching into ep->hcpriv */
- dev_dbg(dev, "ep 0x%02x: using rpipe %u\n",
- ep->desc.bEndpointAddress,
- le16_to_cpu(rpipe->descr.wRPipeIndex));
- }
-error:
- mutex_unlock(&wa->rpipe_mutex);
- return result;
-}
-
-/*
- * Allocate the bitmap for each rpipe.
- */
-int wa_rpipes_create(struct wahc *wa)
-{
- wa->rpipes = le16_to_cpu(wa->wa_descr->wNumRPipes);
- wa->rpipe_bm = bitmap_zalloc(wa->rpipes, GFP_KERNEL);
- if (wa->rpipe_bm == NULL)
- return -ENOMEM;
- return 0;
-}
-
-void wa_rpipes_destroy(struct wahc *wa)
-{
- struct device *dev = &wa->usb_iface->dev;
-
- if (!bitmap_empty(wa->rpipe_bm, wa->rpipes)) {
- WARN_ON(1);
- dev_err(dev, "BUG: pipes not released on exit: %*pb\n",
- wa->rpipes, wa->rpipe_bm);
- }
- bitmap_free(wa->rpipe_bm);
-}
-
-/*
- * Release resources allocated for an endpoint
- *
- * If there is an associated rpipe to this endpoint, Abort any pending
- * transfers and put it. If the rpipe ends up being destroyed,
- * __rpipe_destroy() will cleanup ep->hcpriv.
- *
- * This is called before calling hcd->stop(), so you don't need to do
- * anything else in there.
- */
-void rpipe_ep_disable(struct wahc *wa, struct usb_host_endpoint *ep)
-{
- struct wa_rpipe *rpipe;
-
- mutex_lock(&wa->rpipe_mutex);
- rpipe = ep->hcpriv;
- if (rpipe != NULL) {
- u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex);
-
- usb_control_msg(
- wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- USB_REQ_RPIPE_ABORT,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
- 0, index, NULL, 0, USB_CTRL_SET_TIMEOUT);
- rpipe_put(rpipe);
- }
- mutex_unlock(&wa->rpipe_mutex);
-}
-EXPORT_SYMBOL_GPL(rpipe_ep_disable);
-
-/* Clear the stalled status of an RPIPE. */
-void rpipe_clear_feature_stalled(struct wahc *wa, struct usb_host_endpoint *ep)
-{
- struct wa_rpipe *rpipe;
-
- mutex_lock(&wa->rpipe_mutex);
- rpipe = ep->hcpriv;
- if (rpipe != NULL) {
- u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex);
-
- usb_control_msg(
- wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
- USB_REQ_CLEAR_FEATURE,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
- RPIPE_STALL, index, NULL, 0, USB_CTRL_SET_TIMEOUT);
- }
- mutex_unlock(&wa->rpipe_mutex);
-}
-EXPORT_SYMBOL_GPL(rpipe_clear_feature_stalled);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * WUSB Wire Adapter
- * Data transfer and URB enqueing
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * How transfers work: get a buffer, break it up in segments (segment
- * size is a multiple of the maxpacket size). For each segment issue a
- * segment request (struct wa_xfer_*), then send the data buffer if
- * out or nothing if in (all over the DTO endpoint).
- *
- * For each submitted segment request, a notification will come over
- * the NEP endpoint and a transfer result (struct xfer_result) will
- * arrive in the DTI URB. Read it, get the xfer ID, see if there is
- * data coming (inbound transfer), schedule a read and handle it.
- *
- * Sounds simple, it is a pain to implement.
- *
- *
- * ENTRY POINTS
- *
- * FIXME
- *
- * LIFE CYCLE / STATE DIAGRAM
- *
- * FIXME
- *
- * THIS CODE IS DISGUSTING
- *
- * Warned you are; it's my second try and still not happy with it.
- *
- * NOTES:
- *
- * - No iso
- *
- * - Supports DMA xfers, control, bulk and maybe interrupt
- *
- * - Does not recycle unused rpipes
- *
- * An rpipe is assigned to an endpoint the first time it is used,
- * and then it's there, assigned, until the endpoint is disabled
- * (destroyed [{h,d}wahc_op_ep_disable()]. The assignment of the
- * rpipe to the endpoint is done under the wa->rpipe_sem semaphore
- * (should be a mutex).
- *
- * Two methods it could be done:
- *
- * (a) set up a timer every time an rpipe's use count drops to 1
- * (which means unused) or when a transfer ends. Reset the
- * timer when a xfer is queued. If the timer expires, release
- * the rpipe [see rpipe_ep_disable()].
- *
- * (b) when looking for free rpipes to attach [rpipe_get_by_ep()],
- * when none are found go over the list, check their endpoint
- * and their activity record (if no last-xfer-done-ts in the
- * last x seconds) take it
- *
- * However, due to the fact that we have a set of limited
- * resources (max-segments-at-the-same-time per xfer,
- * xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end
- * we are going to have to rebuild all this based on an scheduler,
- * to where we have a list of transactions to do and based on the
- * availability of the different required components (blocks,
- * rpipes, segment slots, etc), we go scheduling them. Painful.
- */
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/hash.h>
-#include <linux/ratelimit.h>
-#include <linux/export.h>
-#include <linux/scatterlist.h>
-
-#include "wa-hc.h"
-#include "wusbhc.h"
-
-enum {
- /* [WUSB] section 8.3.3 allocates 7 bits for the segment index. */
- WA_SEGS_MAX = 128,
-};
-
-enum wa_seg_status {
- WA_SEG_NOTREADY,
- WA_SEG_READY,
- WA_SEG_DELAYED,
- WA_SEG_SUBMITTED,
- WA_SEG_PENDING,
- WA_SEG_DTI_PENDING,
- WA_SEG_DONE,
- WA_SEG_ERROR,
- WA_SEG_ABORTED,
-};
-
-static void wa_xfer_delayed_run(struct wa_rpipe *);
-static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting);
-
-/*
- * Life cycle governed by 'struct urb' (the refcount of the struct is
- * that of the 'struct urb' and usb_free_urb() would free the whole
- * struct).
- */
-struct wa_seg {
- struct urb tr_urb; /* transfer request urb. */
- struct urb *isoc_pack_desc_urb; /* for isoc packet descriptor. */
- struct urb *dto_urb; /* for data output. */
- struct list_head list_node; /* for rpipe->req_list */
- struct wa_xfer *xfer; /* out xfer */
- u8 index; /* which segment we are */
- int isoc_frame_count; /* number of isoc frames in this segment. */
- int isoc_frame_offset; /* starting frame offset in the xfer URB. */
- /* Isoc frame that the current transfer buffer corresponds to. */
- int isoc_frame_index;
- int isoc_size; /* size of all isoc frames sent by this seg. */
- enum wa_seg_status status;
- ssize_t result; /* bytes xfered or error */
- struct wa_xfer_hdr xfer_hdr;
-};
-
-static inline void wa_seg_init(struct wa_seg *seg)
-{
- usb_init_urb(&seg->tr_urb);
-
- /* set the remaining memory to 0. */
- memset(((void *)seg) + sizeof(seg->tr_urb), 0,
- sizeof(*seg) - sizeof(seg->tr_urb));
-}
-
-/*
- * Protected by xfer->lock
- *
- */
-struct wa_xfer {
- struct kref refcnt;
- struct list_head list_node;
- spinlock_t lock;
- u32 id;
-
- struct wahc *wa; /* Wire adapter we are plugged to */
- struct usb_host_endpoint *ep;
- struct urb *urb; /* URB we are transferring for */
- struct wa_seg **seg; /* transfer segments */
- u8 segs, segs_submitted, segs_done;
- unsigned is_inbound:1;
- unsigned is_dma:1;
- size_t seg_size;
- int result;
-
- gfp_t gfp; /* allocation mask */
-
- struct wusb_dev *wusb_dev; /* for activity timestamps */
-};
-
-static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer,
- struct wa_seg *seg, int curr_iso_frame);
-static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
- int starting_index, enum wa_seg_status status);
-
-static inline void wa_xfer_init(struct wa_xfer *xfer)
-{
- kref_init(&xfer->refcnt);
- INIT_LIST_HEAD(&xfer->list_node);
- spin_lock_init(&xfer->lock);
-}
-
-/*
- * Destroy a transfer structure
- *
- * Note that freeing xfer->seg[cnt]->tr_urb will free the containing
- * xfer->seg[cnt] memory that was allocated by __wa_xfer_setup_segs.
- */
-static void wa_xfer_destroy(struct kref *_xfer)
-{
- struct wa_xfer *xfer = container_of(_xfer, struct wa_xfer, refcnt);
- if (xfer->seg) {
- unsigned cnt;
- for (cnt = 0; cnt < xfer->segs; cnt++) {
- struct wa_seg *seg = xfer->seg[cnt];
- if (seg) {
- usb_free_urb(seg->isoc_pack_desc_urb);
- if (seg->dto_urb) {
- kfree(seg->dto_urb->sg);
- usb_free_urb(seg->dto_urb);
- }
- usb_free_urb(&seg->tr_urb);
- }
- }
- kfree(xfer->seg);
- }
- kfree(xfer);
-}
-
-static void wa_xfer_get(struct wa_xfer *xfer)
-{
- kref_get(&xfer->refcnt);
-}
-
-static void wa_xfer_put(struct wa_xfer *xfer)
-{
- kref_put(&xfer->refcnt, wa_xfer_destroy);
-}
-
-/*
- * Try to get exclusive access to the DTO endpoint resource. Return true
- * if successful.
- */
-static inline int __wa_dto_try_get(struct wahc *wa)
-{
- return (test_and_set_bit(0, &wa->dto_in_use) == 0);
-}
-
-/* Release the DTO endpoint resource. */
-static inline void __wa_dto_put(struct wahc *wa)
-{
- clear_bit_unlock(0, &wa->dto_in_use);
-}
-
-/* Service RPIPEs that are waiting on the DTO resource. */
-static void wa_check_for_delayed_rpipes(struct wahc *wa)
-{
- unsigned long flags;
- int dto_waiting = 0;
- struct wa_rpipe *rpipe;
-
- spin_lock_irqsave(&wa->rpipe_lock, flags);
- while (!list_empty(&wa->rpipe_delayed_list) && !dto_waiting) {
- rpipe = list_first_entry(&wa->rpipe_delayed_list,
- struct wa_rpipe, list_node);
- __wa_xfer_delayed_run(rpipe, &dto_waiting);
- /* remove this RPIPE from the list if it is not waiting. */
- if (!dto_waiting) {
- pr_debug("%s: RPIPE %d serviced and removed from delayed list.\n",
- __func__,
- le16_to_cpu(rpipe->descr.wRPipeIndex));
- list_del_init(&rpipe->list_node);
- }
- }
- spin_unlock_irqrestore(&wa->rpipe_lock, flags);
-}
-
-/* add this RPIPE to the end of the delayed RPIPE list. */
-static void wa_add_delayed_rpipe(struct wahc *wa, struct wa_rpipe *rpipe)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&wa->rpipe_lock, flags);
- /* add rpipe to the list if it is not already on it. */
- if (list_empty(&rpipe->list_node)) {
- pr_debug("%s: adding RPIPE %d to the delayed list.\n",
- __func__, le16_to_cpu(rpipe->descr.wRPipeIndex));
- list_add_tail(&rpipe->list_node, &wa->rpipe_delayed_list);
- }
- spin_unlock_irqrestore(&wa->rpipe_lock, flags);
-}
-
-/*
- * xfer is referenced
- *
- * xfer->lock has to be unlocked
- *
- * We take xfer->lock for setting the result; this is a barrier
- * against drivers/usb/core/hcd.c:unlink1() being called after we call
- * usb_hcd_giveback_urb() and wa_urb_dequeue() trying to get a
- * reference to the transfer.
- */
-static void wa_xfer_giveback(struct wa_xfer *xfer)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&xfer->wa->xfer_list_lock, flags);
- list_del_init(&xfer->list_node);
- usb_hcd_unlink_urb_from_ep(&(xfer->wa->wusb->usb_hcd), xfer->urb);
- spin_unlock_irqrestore(&xfer->wa->xfer_list_lock, flags);
- /* FIXME: segmentation broken -- kills DWA */
- wusbhc_giveback_urb(xfer->wa->wusb, xfer->urb, xfer->result);
- wa_put(xfer->wa);
- wa_xfer_put(xfer);
-}
-
-/*
- * xfer is referenced
- *
- * xfer->lock has to be unlocked
- */
-static void wa_xfer_completion(struct wa_xfer *xfer)
-{
- if (xfer->wusb_dev)
- wusb_dev_put(xfer->wusb_dev);
- rpipe_put(xfer->ep->hcpriv);
- wa_xfer_giveback(xfer);
-}
-
-/*
- * Initialize a transfer's ID
- *
- * We need to use a sequential number; if we use the pointer or the
- * hash of the pointer, it can repeat over sequential transfers and
- * then it will confuse the HWA....wonder why in hell they put a 32
- * bit handle in there then.
- */
-static void wa_xfer_id_init(struct wa_xfer *xfer)
-{
- xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count);
-}
-
-/* Return the xfer's ID. */
-static inline u32 wa_xfer_id(struct wa_xfer *xfer)
-{
- return xfer->id;
-}
-
-/* Return the xfer's ID in transport format (little endian). */
-static inline __le32 wa_xfer_id_le32(struct wa_xfer *xfer)
-{
- return cpu_to_le32(xfer->id);
-}
-
-/*
- * If transfer is done, wrap it up and return true
- *
- * xfer->lock has to be locked
- */
-static unsigned __wa_xfer_is_done(struct wa_xfer *xfer)
-{
- struct device *dev = &xfer->wa->usb_iface->dev;
- unsigned result, cnt;
- struct wa_seg *seg;
- struct urb *urb = xfer->urb;
- unsigned found_short = 0;
-
- result = xfer->segs_done == xfer->segs_submitted;
- if (result == 0)
- goto out;
- urb->actual_length = 0;
- for (cnt = 0; cnt < xfer->segs; cnt++) {
- seg = xfer->seg[cnt];
- switch (seg->status) {
- case WA_SEG_DONE:
- if (found_short && seg->result > 0) {
- dev_dbg(dev, "xfer %p ID %08X#%u: bad short segments (%zu)\n",
- xfer, wa_xfer_id(xfer), cnt,
- seg->result);
- urb->status = -EINVAL;
- goto out;
- }
- urb->actual_length += seg->result;
- if (!(usb_pipeisoc(xfer->urb->pipe))
- && seg->result < xfer->seg_size
- && cnt != xfer->segs-1)
- found_short = 1;
- dev_dbg(dev, "xfer %p ID %08X#%u: DONE short %d "
- "result %zu urb->actual_length %d\n",
- xfer, wa_xfer_id(xfer), seg->index, found_short,
- seg->result, urb->actual_length);
- break;
- case WA_SEG_ERROR:
- xfer->result = seg->result;
- dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zi(0x%08zX)\n",
- xfer, wa_xfer_id(xfer), seg->index, seg->result,
- seg->result);
- goto out;
- case WA_SEG_ABORTED:
- xfer->result = seg->result;
- dev_dbg(dev, "xfer %p ID %08X#%u: ABORTED result %zi(0x%08zX)\n",
- xfer, wa_xfer_id(xfer), seg->index, seg->result,
- seg->result);
- goto out;
- default:
- dev_warn(dev, "xfer %p ID %08X#%u: is_done bad state %d\n",
- xfer, wa_xfer_id(xfer), cnt, seg->status);
- xfer->result = -EINVAL;
- goto out;
- }
- }
- xfer->result = 0;
-out:
- return result;
-}
-
-/*
- * Mark the given segment as done. Return true if this completes the xfer.
- * This should only be called for segs that have been submitted to an RPIPE.
- * Delayed segs are not marked as submitted so they do not need to be marked
- * as done when cleaning up.
- *
- * xfer->lock has to be locked
- */
-static unsigned __wa_xfer_mark_seg_as_done(struct wa_xfer *xfer,
- struct wa_seg *seg, enum wa_seg_status status)
-{
- seg->status = status;
- xfer->segs_done++;
-
- /* check for done. */
- return __wa_xfer_is_done(xfer);
-}
-
-/*
- * Search for a transfer list ID on the HCD's URB list
- *
- * For 32 bit architectures, we use the pointer itself; for 64 bits, a
- * 32-bit hash of the pointer.
- *
- * @returns NULL if not found.
- */
-static struct wa_xfer *wa_xfer_get_by_id(struct wahc *wa, u32 id)
-{
- unsigned long flags;
- struct wa_xfer *xfer_itr;
- spin_lock_irqsave(&wa->xfer_list_lock, flags);
- list_for_each_entry(xfer_itr, &wa->xfer_list, list_node) {
- if (id == xfer_itr->id) {
- wa_xfer_get(xfer_itr);
- goto out;
- }
- }
- xfer_itr = NULL;
-out:
- spin_unlock_irqrestore(&wa->xfer_list_lock, flags);
- return xfer_itr;
-}
-
-struct wa_xfer_abort_buffer {
- struct urb urb;
- struct wahc *wa;
- struct wa_xfer_abort cmd;
-};
-
-static void __wa_xfer_abort_cb(struct urb *urb)
-{
- struct wa_xfer_abort_buffer *b = urb->context;
- struct wahc *wa = b->wa;
-
- /*
- * If the abort request URB failed, then the HWA did not get the abort
- * command. Forcibly clean up the xfer without waiting for a Transfer
- * Result from the HWA.
- */
- if (urb->status < 0) {
- struct wa_xfer *xfer;
- struct device *dev = &wa->usb_iface->dev;
-
- xfer = wa_xfer_get_by_id(wa, le32_to_cpu(b->cmd.dwTransferID));
- dev_err(dev, "%s: Transfer Abort request failed. result: %d\n",
- __func__, urb->status);
- if (xfer) {
- unsigned long flags;
- int done, seg_index = 0;
- struct wa_rpipe *rpipe = xfer->ep->hcpriv;
-
- dev_err(dev, "%s: cleaning up xfer %p ID 0x%08X.\n",
- __func__, xfer, wa_xfer_id(xfer));
- spin_lock_irqsave(&xfer->lock, flags);
- /* skip done segs. */
- while (seg_index < xfer->segs) {
- struct wa_seg *seg = xfer->seg[seg_index];
-
- if ((seg->status == WA_SEG_DONE) ||
- (seg->status == WA_SEG_ERROR)) {
- ++seg_index;
- } else {
- break;
- }
- }
- /* mark remaining segs as aborted. */
- wa_complete_remaining_xfer_segs(xfer, seg_index,
- WA_SEG_ABORTED);
- done = __wa_xfer_is_done(xfer);
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (done)
- wa_xfer_completion(xfer);
- wa_xfer_delayed_run(rpipe);
- wa_xfer_put(xfer);
- } else {
- dev_err(dev, "%s: xfer ID 0x%08X already gone.\n",
- __func__, le32_to_cpu(b->cmd.dwTransferID));
- }
- }
-
- wa_put(wa); /* taken in __wa_xfer_abort */
- usb_put_urb(&b->urb);
-}
-
-/*
- * Aborts an ongoing transaction
- *
- * Assumes the transfer is referenced and locked and in a submitted
- * state (mainly that there is an endpoint/rpipe assigned).
- *
- * The callback (see above) does nothing but freeing up the data by
- * putting the URB. Because the URB is allocated at the head of the
- * struct, the whole space we allocated is kfreed. *
- */
-static int __wa_xfer_abort(struct wa_xfer *xfer)
-{
- int result = -ENOMEM;
- struct device *dev = &xfer->wa->usb_iface->dev;
- struct wa_xfer_abort_buffer *b;
- struct wa_rpipe *rpipe = xfer->ep->hcpriv;
-
- b = kmalloc(sizeof(*b), GFP_ATOMIC);
- if (b == NULL)
- goto error_kmalloc;
- b->cmd.bLength = sizeof(b->cmd);
- b->cmd.bRequestType = WA_XFER_ABORT;
- b->cmd.wRPipe = rpipe->descr.wRPipeIndex;
- b->cmd.dwTransferID = wa_xfer_id_le32(xfer);
- b->wa = wa_get(xfer->wa);
-
- usb_init_urb(&b->urb);
- usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev,
- usb_sndbulkpipe(xfer->wa->usb_dev,
- xfer->wa->dto_epd->bEndpointAddress),
- &b->cmd, sizeof(b->cmd), __wa_xfer_abort_cb, b);
- result = usb_submit_urb(&b->urb, GFP_ATOMIC);
- if (result < 0)
- goto error_submit;
- return result; /* callback frees! */
-
-
-error_submit:
- wa_put(xfer->wa);
- if (printk_ratelimit())
- dev_err(dev, "xfer %p: Can't submit abort request: %d\n",
- xfer, result);
- kfree(b);
-error_kmalloc:
- return result;
-
-}
-
-/*
- * Calculate the number of isoc frames starting from isoc_frame_offset
- * that will fit a in transfer segment.
- */
-static int __wa_seg_calculate_isoc_frame_count(struct wa_xfer *xfer,
- int isoc_frame_offset, int *total_size)
-{
- int segment_size = 0, frame_count = 0;
- int index = isoc_frame_offset;
- struct usb_iso_packet_descriptor *iso_frame_desc =
- xfer->urb->iso_frame_desc;
-
- while ((index < xfer->urb->number_of_packets)
- && ((segment_size + iso_frame_desc[index].length)
- <= xfer->seg_size)) {
- /*
- * For Alereon HWA devices, only include an isoc frame in an
- * out segment if it is physically contiguous with the previous
- * frame. This is required because those devices expect
- * the isoc frames to be sent as a single USB transaction as
- * opposed to one transaction per frame with standard HWA.
- */
- if ((xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC)
- && (xfer->is_inbound == 0)
- && (index > isoc_frame_offset)
- && ((iso_frame_desc[index - 1].offset +
- iso_frame_desc[index - 1].length) !=
- iso_frame_desc[index].offset))
- break;
-
- /* this frame fits. count it. */
- ++frame_count;
- segment_size += iso_frame_desc[index].length;
-
- /* move to the next isoc frame. */
- ++index;
- }
-
- *total_size = segment_size;
- return frame_count;
-}
-
-/*
- *
- * @returns < 0 on error, transfer segment request size if ok
- */
-static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer,
- enum wa_xfer_type *pxfer_type)
-{
- ssize_t result;
- struct device *dev = &xfer->wa->usb_iface->dev;
- size_t maxpktsize;
- struct urb *urb = xfer->urb;
- struct wa_rpipe *rpipe = xfer->ep->hcpriv;
-
- switch (rpipe->descr.bmAttribute & 0x3) {
- case USB_ENDPOINT_XFER_CONTROL:
- *pxfer_type = WA_XFER_TYPE_CTL;
- result = sizeof(struct wa_xfer_ctl);
- break;
- case USB_ENDPOINT_XFER_INT:
- case USB_ENDPOINT_XFER_BULK:
- *pxfer_type = WA_XFER_TYPE_BI;
- result = sizeof(struct wa_xfer_bi);
- break;
- case USB_ENDPOINT_XFER_ISOC:
- *pxfer_type = WA_XFER_TYPE_ISO;
- result = sizeof(struct wa_xfer_hwaiso);
- break;
- default:
- /* never happens */
- BUG();
- result = -EINVAL; /* shut gcc up */
- }
- xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0;
- xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0;
-
- maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize);
- xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks)
- * 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1);
- /* Compute the segment size and make sure it is a multiple of
- * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of
- * a check (FIXME) */
- if (xfer->seg_size < maxpktsize) {
- dev_err(dev,
- "HW BUG? seg_size %zu smaller than maxpktsize %zu\n",
- xfer->seg_size, maxpktsize);
- result = -EINVAL;
- goto error;
- }
- xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize;
- if ((rpipe->descr.bmAttribute & 0x3) == USB_ENDPOINT_XFER_ISOC) {
- int index = 0;
-
- xfer->segs = 0;
- /*
- * loop over urb->number_of_packets to determine how many
- * xfer segments will be needed to send the isoc frames.
- */
- while (index < urb->number_of_packets) {
- int seg_size; /* don't care. */
- index += __wa_seg_calculate_isoc_frame_count(xfer,
- index, &seg_size);
- ++xfer->segs;
- }
- } else {
- xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length,
- xfer->seg_size);
- if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL)
- xfer->segs = 1;
- }
-
- if (xfer->segs > WA_SEGS_MAX) {
- dev_err(dev, "BUG? oops, number of segments %zu bigger than %d\n",
- (urb->transfer_buffer_length/xfer->seg_size),
- WA_SEGS_MAX);
- result = -EINVAL;
- goto error;
- }
-error:
- return result;
-}
-
-static void __wa_setup_isoc_packet_descr(
- struct wa_xfer_packet_info_hwaiso *packet_desc,
- struct wa_xfer *xfer,
- struct wa_seg *seg) {
- struct usb_iso_packet_descriptor *iso_frame_desc =
- xfer->urb->iso_frame_desc;
- int frame_index;
-
- /* populate isoc packet descriptor. */
- packet_desc->bPacketType = WA_XFER_ISO_PACKET_INFO;
- packet_desc->wLength = cpu_to_le16(struct_size(packet_desc,
- PacketLength,
- seg->isoc_frame_count));
- for (frame_index = 0; frame_index < seg->isoc_frame_count;
- ++frame_index) {
- int offset_index = frame_index + seg->isoc_frame_offset;
- packet_desc->PacketLength[frame_index] =
- cpu_to_le16(iso_frame_desc[offset_index].length);
- }
-}
-
-
-/* Fill in the common request header and xfer-type specific data. */
-static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer,
- struct wa_xfer_hdr *xfer_hdr0,
- enum wa_xfer_type xfer_type,
- size_t xfer_hdr_size)
-{
- struct wa_rpipe *rpipe = xfer->ep->hcpriv;
- struct wa_seg *seg = xfer->seg[0];
-
- xfer_hdr0 = &seg->xfer_hdr;
- xfer_hdr0->bLength = xfer_hdr_size;
- xfer_hdr0->bRequestType = xfer_type;
- xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex;
- xfer_hdr0->dwTransferID = wa_xfer_id_le32(xfer);
- xfer_hdr0->bTransferSegment = 0;
- switch (xfer_type) {
- case WA_XFER_TYPE_CTL: {
- struct wa_xfer_ctl *xfer_ctl =
- container_of(xfer_hdr0, struct wa_xfer_ctl, hdr);
- xfer_ctl->bmAttribute = xfer->is_inbound ? 1 : 0;
- memcpy(&xfer_ctl->baSetupData, xfer->urb->setup_packet,
- sizeof(xfer_ctl->baSetupData));
- break;
- }
- case WA_XFER_TYPE_BI:
- break;
- case WA_XFER_TYPE_ISO: {
- struct wa_xfer_hwaiso *xfer_iso =
- container_of(xfer_hdr0, struct wa_xfer_hwaiso, hdr);
- struct wa_xfer_packet_info_hwaiso *packet_desc =
- ((void *)xfer_iso) + xfer_hdr_size;
-
- /* populate the isoc section of the transfer request. */
- xfer_iso->dwNumOfPackets = cpu_to_le32(seg->isoc_frame_count);
- /* populate isoc packet descriptor. */
- __wa_setup_isoc_packet_descr(packet_desc, xfer, seg);
- break;
- }
- default:
- BUG();
- };
-}
-
-/*
- * Callback for the OUT data phase of the segment request
- *
- * Check wa_seg_tr_cb(); most comments also apply here because this
- * function does almost the same thing and they work closely
- * together.
- *
- * If the seg request has failed but this DTO phase has succeeded,
- * wa_seg_tr_cb() has already failed the segment and moved the
- * status to WA_SEG_ERROR, so this will go through 'case 0' and
- * effectively do nothing.
- */
-static void wa_seg_dto_cb(struct urb *urb)
-{
- struct wa_seg *seg = urb->context;
- struct wa_xfer *xfer = seg->xfer;
- struct wahc *wa;
- struct device *dev;
- struct wa_rpipe *rpipe;
- unsigned long flags;
- unsigned rpipe_ready = 0;
- int data_send_done = 1, release_dto = 0, holding_dto = 0;
- u8 done = 0;
- int result;
-
- /* free the sg if it was used. */
- kfree(urb->sg);
- urb->sg = NULL;
-
- spin_lock_irqsave(&xfer->lock, flags);
- wa = xfer->wa;
- dev = &wa->usb_iface->dev;
- if (usb_pipeisoc(xfer->urb->pipe)) {
- /* Alereon HWA sends all isoc frames in a single transfer. */
- if (wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC)
- seg->isoc_frame_index += seg->isoc_frame_count;
- else
- seg->isoc_frame_index += 1;
- if (seg->isoc_frame_index < seg->isoc_frame_count) {
- data_send_done = 0;
- holding_dto = 1; /* checked in error cases. */
- /*
- * if this is the last isoc frame of the segment, we
- * can release DTO after sending this frame.
- */
- if ((seg->isoc_frame_index + 1) >=
- seg->isoc_frame_count)
- release_dto = 1;
- }
- dev_dbg(dev, "xfer 0x%08X#%u: isoc frame = %d, holding_dto = %d, release_dto = %d.\n",
- wa_xfer_id(xfer), seg->index, seg->isoc_frame_index,
- holding_dto, release_dto);
- }
- spin_unlock_irqrestore(&xfer->lock, flags);
-
- switch (urb->status) {
- case 0:
- spin_lock_irqsave(&xfer->lock, flags);
- seg->result += urb->actual_length;
- if (data_send_done) {
- dev_dbg(dev, "xfer 0x%08X#%u: data out done (%zu bytes)\n",
- wa_xfer_id(xfer), seg->index, seg->result);
- if (seg->status < WA_SEG_PENDING)
- seg->status = WA_SEG_PENDING;
- } else {
- /* should only hit this for isoc xfers. */
- /*
- * Populate the dto URB with the next isoc frame buffer,
- * send the URB and release DTO if we no longer need it.
- */
- __wa_populate_dto_urb_isoc(xfer, seg,
- seg->isoc_frame_offset + seg->isoc_frame_index);
-
- /* resubmit the URB with the next isoc frame. */
- /* take a ref on resubmit. */
- wa_xfer_get(xfer);
- result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC);
- if (result < 0) {
- dev_err(dev, "xfer 0x%08X#%u: DTO submit failed: %d\n",
- wa_xfer_id(xfer), seg->index, result);
- spin_unlock_irqrestore(&xfer->lock, flags);
- goto error_dto_submit;
- }
- }
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (release_dto) {
- __wa_dto_put(wa);
- wa_check_for_delayed_rpipes(wa);
- }
- break;
- case -ECONNRESET: /* URB unlinked; no need to do anything */
- case -ENOENT: /* as it was done by the who unlinked us */
- if (holding_dto) {
- __wa_dto_put(wa);
- wa_check_for_delayed_rpipes(wa);
- }
- break;
- default: /* Other errors ... */
- dev_err(dev, "xfer 0x%08X#%u: data out error %d\n",
- wa_xfer_id(xfer), seg->index, urb->status);
- goto error_default;
- }
-
- /* taken when this URB was submitted. */
- wa_xfer_put(xfer);
- return;
-
-error_dto_submit:
- /* taken on resubmit attempt. */
- wa_xfer_put(xfer);
-error_default:
- spin_lock_irqsave(&xfer->lock, flags);
- rpipe = xfer->ep->hcpriv;
- if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
- EDC_ERROR_TIMEFRAME)){
- dev_err(dev, "DTO: URB max acceptable errors exceeded, resetting device\n");
- wa_reset_all(wa);
- }
- if (seg->status != WA_SEG_ERROR) {
- seg->result = urb->status;
- __wa_xfer_abort(xfer);
- rpipe_ready = rpipe_avail_inc(rpipe);
- done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR);
- }
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (holding_dto) {
- __wa_dto_put(wa);
- wa_check_for_delayed_rpipes(wa);
- }
- if (done)
- wa_xfer_completion(xfer);
- if (rpipe_ready)
- wa_xfer_delayed_run(rpipe);
- /* taken when this URB was submitted. */
- wa_xfer_put(xfer);
-}
-
-/*
- * Callback for the isoc packet descriptor phase of the segment request
- *
- * Check wa_seg_tr_cb(); most comments also apply here because this
- * function does almost the same thing and they work closely
- * together.
- *
- * If the seg request has failed but this phase has succeeded,
- * wa_seg_tr_cb() has already failed the segment and moved the
- * status to WA_SEG_ERROR, so this will go through 'case 0' and
- * effectively do nothing.
- */
-static void wa_seg_iso_pack_desc_cb(struct urb *urb)
-{
- struct wa_seg *seg = urb->context;
- struct wa_xfer *xfer = seg->xfer;
- struct wahc *wa;
- struct device *dev;
- struct wa_rpipe *rpipe;
- unsigned long flags;
- unsigned rpipe_ready = 0;
- u8 done = 0;
-
- switch (urb->status) {
- case 0:
- spin_lock_irqsave(&xfer->lock, flags);
- wa = xfer->wa;
- dev = &wa->usb_iface->dev;
- dev_dbg(dev, "iso xfer %08X#%u: packet descriptor done\n",
- wa_xfer_id(xfer), seg->index);
- if (xfer->is_inbound && seg->status < WA_SEG_PENDING)
- seg->status = WA_SEG_PENDING;
- spin_unlock_irqrestore(&xfer->lock, flags);
- break;
- case -ECONNRESET: /* URB unlinked; no need to do anything */
- case -ENOENT: /* as it was done by the who unlinked us */
- break;
- default: /* Other errors ... */
- spin_lock_irqsave(&xfer->lock, flags);
- wa = xfer->wa;
- dev = &wa->usb_iface->dev;
- rpipe = xfer->ep->hcpriv;
- pr_err_ratelimited("iso xfer %08X#%u: packet descriptor error %d\n",
- wa_xfer_id(xfer), seg->index, urb->status);
- if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
- EDC_ERROR_TIMEFRAME)){
- dev_err(dev, "iso xfer: URB max acceptable errors exceeded, resetting device\n");
- wa_reset_all(wa);
- }
- if (seg->status != WA_SEG_ERROR) {
- usb_unlink_urb(seg->dto_urb);
- seg->result = urb->status;
- __wa_xfer_abort(xfer);
- rpipe_ready = rpipe_avail_inc(rpipe);
- done = __wa_xfer_mark_seg_as_done(xfer, seg,
- WA_SEG_ERROR);
- }
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (done)
- wa_xfer_completion(xfer);
- if (rpipe_ready)
- wa_xfer_delayed_run(rpipe);
- }
- /* taken when this URB was submitted. */
- wa_xfer_put(xfer);
-}
-
-/*
- * Callback for the segment request
- *
- * If successful transition state (unless already transitioned or
- * outbound transfer); otherwise, take a note of the error, mark this
- * segment done and try completion.
- *
- * Note we don't access until we are sure that the transfer hasn't
- * been cancelled (ECONNRESET, ENOENT), which could mean that
- * seg->xfer could be already gone.
- *
- * We have to check before setting the status to WA_SEG_PENDING
- * because sometimes the xfer result callback arrives before this
- * callback (geeeeeeze), so it might happen that we are already in
- * another state. As well, we don't set it if the transfer is not inbound,
- * as in that case, wa_seg_dto_cb will do it when the OUT data phase
- * finishes.
- */
-static void wa_seg_tr_cb(struct urb *urb)
-{
- struct wa_seg *seg = urb->context;
- struct wa_xfer *xfer = seg->xfer;
- struct wahc *wa;
- struct device *dev;
- struct wa_rpipe *rpipe;
- unsigned long flags;
- unsigned rpipe_ready;
- u8 done = 0;
-
- switch (urb->status) {
- case 0:
- spin_lock_irqsave(&xfer->lock, flags);
- wa = xfer->wa;
- dev = &wa->usb_iface->dev;
- dev_dbg(dev, "xfer %p ID 0x%08X#%u: request done\n",
- xfer, wa_xfer_id(xfer), seg->index);
- if (xfer->is_inbound &&
- seg->status < WA_SEG_PENDING &&
- !(usb_pipeisoc(xfer->urb->pipe)))
- seg->status = WA_SEG_PENDING;
- spin_unlock_irqrestore(&xfer->lock, flags);
- break;
- case -ECONNRESET: /* URB unlinked; no need to do anything */
- case -ENOENT: /* as it was done by the who unlinked us */
- break;
- default: /* Other errors ... */
- spin_lock_irqsave(&xfer->lock, flags);
- wa = xfer->wa;
- dev = &wa->usb_iface->dev;
- rpipe = xfer->ep->hcpriv;
- if (printk_ratelimit())
- dev_err(dev, "xfer %p ID 0x%08X#%u: request error %d\n",
- xfer, wa_xfer_id(xfer), seg->index,
- urb->status);
- if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
- EDC_ERROR_TIMEFRAME)){
- dev_err(dev, "DTO: URB max acceptable errors "
- "exceeded, resetting device\n");
- wa_reset_all(wa);
- }
- usb_unlink_urb(seg->isoc_pack_desc_urb);
- usb_unlink_urb(seg->dto_urb);
- seg->result = urb->status;
- __wa_xfer_abort(xfer);
- rpipe_ready = rpipe_avail_inc(rpipe);
- done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR);
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (done)
- wa_xfer_completion(xfer);
- if (rpipe_ready)
- wa_xfer_delayed_run(rpipe);
- }
- /* taken when this URB was submitted. */
- wa_xfer_put(xfer);
-}
-
-/*
- * Allocate an SG list to store bytes_to_transfer bytes and copy the
- * subset of the in_sg that matches the buffer subset
- * we are about to transfer.
- */
-static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg,
- const unsigned int bytes_transferred,
- const unsigned int bytes_to_transfer, int *out_num_sgs)
-{
- struct scatterlist *out_sg;
- unsigned int bytes_processed = 0, offset_into_current_page_data = 0,
- nents;
- struct scatterlist *current_xfer_sg = in_sg;
- struct scatterlist *current_seg_sg, *last_seg_sg;
-
- /* skip previously transferred pages. */
- while ((current_xfer_sg) &&
- (bytes_processed < bytes_transferred)) {
- bytes_processed += current_xfer_sg->length;
-
- /* advance the sg if current segment starts on or past the
- next page. */
- if (bytes_processed <= bytes_transferred)
- current_xfer_sg = sg_next(current_xfer_sg);
- }
-
- /* the data for the current segment starts in current_xfer_sg.
- calculate the offset. */
- if (bytes_processed > bytes_transferred) {
- offset_into_current_page_data = current_xfer_sg->length -
- (bytes_processed - bytes_transferred);
- }
-
- /* calculate the number of pages needed by this segment. */
- nents = DIV_ROUND_UP((bytes_to_transfer +
- offset_into_current_page_data +
- current_xfer_sg->offset),
- PAGE_SIZE);
-
- out_sg = kmalloc((sizeof(struct scatterlist) * nents), GFP_ATOMIC);
- if (out_sg) {
- sg_init_table(out_sg, nents);
-
- /* copy the portion of the incoming SG that correlates to the
- * data to be transferred by this segment to the segment SG. */
- last_seg_sg = current_seg_sg = out_sg;
- bytes_processed = 0;
-
- /* reset nents and calculate the actual number of sg entries
- needed. */
- nents = 0;
- while ((bytes_processed < bytes_to_transfer) &&
- current_seg_sg && current_xfer_sg) {
- unsigned int page_len = min((current_xfer_sg->length -
- offset_into_current_page_data),
- (bytes_to_transfer - bytes_processed));
-
- sg_set_page(current_seg_sg, sg_page(current_xfer_sg),
- page_len,
- current_xfer_sg->offset +
- offset_into_current_page_data);
-
- bytes_processed += page_len;
-
- last_seg_sg = current_seg_sg;
- current_seg_sg = sg_next(current_seg_sg);
- current_xfer_sg = sg_next(current_xfer_sg);
-
- /* only the first page may require additional offset. */
- offset_into_current_page_data = 0;
- nents++;
- }
-
- /* update num_sgs and terminate the list since we may have
- * concatenated pages. */
- sg_mark_end(last_seg_sg);
- *out_num_sgs = nents;
- }
-
- return out_sg;
-}
-
-/*
- * Populate DMA buffer info for the isoc dto urb.
- */
-static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer,
- struct wa_seg *seg, int curr_iso_frame)
-{
- seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- seg->dto_urb->sg = NULL;
- seg->dto_urb->num_sgs = 0;
- /* dto urb buffer address pulled from iso_frame_desc. */
- seg->dto_urb->transfer_dma = xfer->urb->transfer_dma +
- xfer->urb->iso_frame_desc[curr_iso_frame].offset;
- /* The Alereon HWA sends a single URB with all isoc segs. */
- if (xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC)
- seg->dto_urb->transfer_buffer_length = seg->isoc_size;
- else
- seg->dto_urb->transfer_buffer_length =
- xfer->urb->iso_frame_desc[curr_iso_frame].length;
-}
-
-/*
- * Populate buffer ptr and size, DMA buffer or SG list for the dto urb.
- */
-static int __wa_populate_dto_urb(struct wa_xfer *xfer,
- struct wa_seg *seg, size_t buf_itr_offset, size_t buf_itr_size)
-{
- int result = 0;
-
- if (xfer->is_dma) {
- seg->dto_urb->transfer_dma =
- xfer->urb->transfer_dma + buf_itr_offset;
- seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- seg->dto_urb->sg = NULL;
- seg->dto_urb->num_sgs = 0;
- } else {
- /* do buffer or SG processing. */
- seg->dto_urb->transfer_flags &=
- ~URB_NO_TRANSFER_DMA_MAP;
- /* this should always be 0 before a resubmit. */
- seg->dto_urb->num_mapped_sgs = 0;
-
- if (xfer->urb->transfer_buffer) {
- seg->dto_urb->transfer_buffer =
- xfer->urb->transfer_buffer +
- buf_itr_offset;
- seg->dto_urb->sg = NULL;
- seg->dto_urb->num_sgs = 0;
- } else {
- seg->dto_urb->transfer_buffer = NULL;
-
- /*
- * allocate an SG list to store seg_size bytes
- * and copy the subset of the xfer->urb->sg that
- * matches the buffer subset we are about to
- * read.
- */
- seg->dto_urb->sg = wa_xfer_create_subset_sg(
- xfer->urb->sg,
- buf_itr_offset, buf_itr_size,
- &(seg->dto_urb->num_sgs));
- if (!(seg->dto_urb->sg))
- result = -ENOMEM;
- }
- }
- seg->dto_urb->transfer_buffer_length = buf_itr_size;
-
- return result;
-}
-
-/*
- * Allocate the segs array and initialize each of them
- *
- * The segments are freed by wa_xfer_destroy() when the xfer use count
- * drops to zero; however, because each segment is given the same life
- * cycle as the USB URB it contains, it is actually freed by
- * usb_put_urb() on the contained USB URB (twisted, eh?).
- */
-static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size)
-{
- int result, cnt, isoc_frame_offset = 0;
- size_t alloc_size = sizeof(*xfer->seg[0])
- - sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size;
- struct usb_device *usb_dev = xfer->wa->usb_dev;
- const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd;
- struct wa_seg *seg;
- size_t buf_itr, buf_size, buf_itr_size;
-
- result = -ENOMEM;
- xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC);
- if (xfer->seg == NULL)
- goto error_segs_kzalloc;
- buf_itr = 0;
- buf_size = xfer->urb->transfer_buffer_length;
- for (cnt = 0; cnt < xfer->segs; cnt++) {
- size_t iso_pkt_descr_size = 0;
- int seg_isoc_frame_count = 0, seg_isoc_size = 0;
-
- /*
- * Adjust the size of the segment object to contain space for
- * the isoc packet descriptor buffer.
- */
- if (usb_pipeisoc(xfer->urb->pipe)) {
- seg_isoc_frame_count =
- __wa_seg_calculate_isoc_frame_count(xfer,
- isoc_frame_offset, &seg_isoc_size);
-
- iso_pkt_descr_size =
- sizeof(struct wa_xfer_packet_info_hwaiso) +
- (seg_isoc_frame_count * sizeof(__le16));
- }
- result = -ENOMEM;
- seg = xfer->seg[cnt] = kmalloc(alloc_size + iso_pkt_descr_size,
- GFP_ATOMIC);
- if (seg == NULL)
- goto error_seg_kmalloc;
- wa_seg_init(seg);
- seg->xfer = xfer;
- seg->index = cnt;
- usb_fill_bulk_urb(&seg->tr_urb, usb_dev,
- usb_sndbulkpipe(usb_dev,
- dto_epd->bEndpointAddress),
- &seg->xfer_hdr, xfer_hdr_size,
- wa_seg_tr_cb, seg);
- buf_itr_size = min(buf_size, xfer->seg_size);
-
- if (usb_pipeisoc(xfer->urb->pipe)) {
- seg->isoc_frame_count = seg_isoc_frame_count;
- seg->isoc_frame_offset = isoc_frame_offset;
- seg->isoc_size = seg_isoc_size;
- /* iso packet descriptor. */
- seg->isoc_pack_desc_urb =
- usb_alloc_urb(0, GFP_ATOMIC);
- if (seg->isoc_pack_desc_urb == NULL)
- goto error_iso_pack_desc_alloc;
- /*
- * The buffer for the isoc packet descriptor starts
- * after the transfer request header in the
- * segment object memory buffer.
- */
- usb_fill_bulk_urb(
- seg->isoc_pack_desc_urb, usb_dev,
- usb_sndbulkpipe(usb_dev,
- dto_epd->bEndpointAddress),
- (void *)(&seg->xfer_hdr) +
- xfer_hdr_size,
- iso_pkt_descr_size,
- wa_seg_iso_pack_desc_cb, seg);
-
- /* adjust starting frame offset for next seg. */
- isoc_frame_offset += seg_isoc_frame_count;
- }
-
- if (xfer->is_inbound == 0 && buf_size > 0) {
- /* outbound data. */
- seg->dto_urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (seg->dto_urb == NULL)
- goto error_dto_alloc;
- usb_fill_bulk_urb(
- seg->dto_urb, usb_dev,
- usb_sndbulkpipe(usb_dev,
- dto_epd->bEndpointAddress),
- NULL, 0, wa_seg_dto_cb, seg);
-
- if (usb_pipeisoc(xfer->urb->pipe)) {
- /*
- * Fill in the xfer buffer information for the
- * first isoc frame. Subsequent frames in this
- * segment will be filled in and sent from the
- * DTO completion routine, if needed.
- */
- __wa_populate_dto_urb_isoc(xfer, seg,
- seg->isoc_frame_offset);
- } else {
- /* fill in the xfer buffer information. */
- result = __wa_populate_dto_urb(xfer, seg,
- buf_itr, buf_itr_size);
- if (result < 0)
- goto error_seg_outbound_populate;
-
- buf_itr += buf_itr_size;
- buf_size -= buf_itr_size;
- }
- }
- seg->status = WA_SEG_READY;
- }
- return 0;
-
- /*
- * Free the memory for the current segment which failed to init.
- * Use the fact that cnt is left at were it failed. The remaining
- * segments will be cleaned up by wa_xfer_destroy.
- */
-error_seg_outbound_populate:
- usb_free_urb(xfer->seg[cnt]->dto_urb);
-error_dto_alloc:
- usb_free_urb(xfer->seg[cnt]->isoc_pack_desc_urb);
-error_iso_pack_desc_alloc:
- kfree(xfer->seg[cnt]);
- xfer->seg[cnt] = NULL;
-error_seg_kmalloc:
-error_segs_kzalloc:
- return result;
-}
-
-/*
- * Allocates all the stuff needed to submit a transfer
- *
- * Breaks the whole data buffer in a list of segments, each one has a
- * structure allocated to it and linked in xfer->seg[index]
- *
- * FIXME: merge setup_segs() and the last part of this function, no
- * need to do two for loops when we could run everything in a
- * single one
- */
-static int __wa_xfer_setup(struct wa_xfer *xfer, struct urb *urb)
-{
- int result;
- struct device *dev = &xfer->wa->usb_iface->dev;
- enum wa_xfer_type xfer_type = 0; /* shut up GCC */
- size_t xfer_hdr_size, cnt, transfer_size;
- struct wa_xfer_hdr *xfer_hdr0, *xfer_hdr;
-
- result = __wa_xfer_setup_sizes(xfer, &xfer_type);
- if (result < 0)
- goto error_setup_sizes;
- xfer_hdr_size = result;
- result = __wa_xfer_setup_segs(xfer, xfer_hdr_size);
- if (result < 0) {
- dev_err(dev, "xfer %p: Failed to allocate %d segments: %d\n",
- xfer, xfer->segs, result);
- goto error_setup_segs;
- }
- /* Fill the first header */
- xfer_hdr0 = &xfer->seg[0]->xfer_hdr;
- wa_xfer_id_init(xfer);
- __wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size);
-
- /* Fill remaining headers */
- xfer_hdr = xfer_hdr0;
- if (xfer_type == WA_XFER_TYPE_ISO) {
- xfer_hdr0->dwTransferLength =
- cpu_to_le32(xfer->seg[0]->isoc_size);
- for (cnt = 1; cnt < xfer->segs; cnt++) {
- struct wa_xfer_packet_info_hwaiso *packet_desc;
- struct wa_seg *seg = xfer->seg[cnt];
- struct wa_xfer_hwaiso *xfer_iso;
-
- xfer_hdr = &seg->xfer_hdr;
- xfer_iso = container_of(xfer_hdr,
- struct wa_xfer_hwaiso, hdr);
- packet_desc = ((void *)xfer_hdr) + xfer_hdr_size;
- /*
- * Copy values from the 0th header. Segment specific
- * values are set below.
- */
- memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size);
- xfer_hdr->bTransferSegment = cnt;
- xfer_hdr->dwTransferLength =
- cpu_to_le32(seg->isoc_size);
- xfer_iso->dwNumOfPackets =
- cpu_to_le32(seg->isoc_frame_count);
- __wa_setup_isoc_packet_descr(packet_desc, xfer, seg);
- seg->status = WA_SEG_READY;
- }
- } else {
- transfer_size = urb->transfer_buffer_length;
- xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ?
- cpu_to_le32(xfer->seg_size) :
- cpu_to_le32(transfer_size);
- transfer_size -= xfer->seg_size;
- for (cnt = 1; cnt < xfer->segs; cnt++) {
- xfer_hdr = &xfer->seg[cnt]->xfer_hdr;
- memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size);
- xfer_hdr->bTransferSegment = cnt;
- xfer_hdr->dwTransferLength =
- transfer_size > xfer->seg_size ?
- cpu_to_le32(xfer->seg_size)
- : cpu_to_le32(transfer_size);
- xfer->seg[cnt]->status = WA_SEG_READY;
- transfer_size -= xfer->seg_size;
- }
- }
- xfer_hdr->bTransferSegment |= 0x80; /* this is the last segment */
- result = 0;
-error_setup_segs:
-error_setup_sizes:
- return result;
-}
-
-/*
- *
- *
- * rpipe->seg_lock is held!
- */
-static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer,
- struct wa_seg *seg, int *dto_done)
-{
- int result;
-
- /* default to done unless we encounter a multi-frame isoc segment. */
- *dto_done = 1;
-
- /*
- * Take a ref for each segment urb so the xfer cannot disappear until
- * all of the callbacks run.
- */
- wa_xfer_get(xfer);
- /* submit the transfer request. */
- seg->status = WA_SEG_SUBMITTED;
- result = usb_submit_urb(&seg->tr_urb, GFP_ATOMIC);
- if (result < 0) {
- pr_err("%s: xfer %p#%u: REQ submit failed: %d\n",
- __func__, xfer, seg->index, result);
- wa_xfer_put(xfer);
- goto error_tr_submit;
- }
- /* submit the isoc packet descriptor if present. */
- if (seg->isoc_pack_desc_urb) {
- wa_xfer_get(xfer);
- result = usb_submit_urb(seg->isoc_pack_desc_urb, GFP_ATOMIC);
- seg->isoc_frame_index = 0;
- if (result < 0) {
- pr_err("%s: xfer %p#%u: ISO packet descriptor submit failed: %d\n",
- __func__, xfer, seg->index, result);
- wa_xfer_put(xfer);
- goto error_iso_pack_desc_submit;
- }
- }
- /* submit the out data if this is an out request. */
- if (seg->dto_urb) {
- struct wahc *wa = xfer->wa;
- wa_xfer_get(xfer);
- result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC);
- if (result < 0) {
- pr_err("%s: xfer %p#%u: DTO submit failed: %d\n",
- __func__, xfer, seg->index, result);
- wa_xfer_put(xfer);
- goto error_dto_submit;
- }
- /*
- * If this segment contains more than one isoc frame, hold
- * onto the dto resource until we send all frames.
- * Only applies to non-Alereon devices.
- */
- if (((wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) == 0)
- && (seg->isoc_frame_count > 1))
- *dto_done = 0;
- }
- rpipe_avail_dec(rpipe);
- return 0;
-
-error_dto_submit:
- usb_unlink_urb(seg->isoc_pack_desc_urb);
-error_iso_pack_desc_submit:
- usb_unlink_urb(&seg->tr_urb);
-error_tr_submit:
- seg->status = WA_SEG_ERROR;
- seg->result = result;
- *dto_done = 1;
- return result;
-}
-
-/*
- * Execute more queued request segments until the maximum concurrent allowed.
- * Return true if the DTO resource was acquired and released.
- *
- * The ugly unlock/lock sequence on the error path is needed as the
- * xfer->lock normally nests the seg_lock and not viceversa.
- */
-static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting)
-{
- int result, dto_acquired = 0, dto_done = 0;
- struct device *dev = &rpipe->wa->usb_iface->dev;
- struct wa_seg *seg;
- struct wa_xfer *xfer;
- unsigned long flags;
-
- *dto_waiting = 0;
-
- spin_lock_irqsave(&rpipe->seg_lock, flags);
- while (atomic_read(&rpipe->segs_available) > 0
- && !list_empty(&rpipe->seg_list)
- && (dto_acquired = __wa_dto_try_get(rpipe->wa))) {
- seg = list_first_entry(&(rpipe->seg_list), struct wa_seg,
- list_node);
- list_del(&seg->list_node);
- xfer = seg->xfer;
- /*
- * Get a reference to the xfer in case the callbacks for the
- * URBs submitted by __wa_seg_submit attempt to complete
- * the xfer before this function completes.
- */
- wa_xfer_get(xfer);
- result = __wa_seg_submit(rpipe, xfer, seg, &dto_done);
- /* release the dto resource if this RPIPE is done with it. */
- if (dto_done)
- __wa_dto_put(rpipe->wa);
- dev_dbg(dev, "xfer %p ID %08X#%u submitted from delayed [%d segments available] %d\n",
- xfer, wa_xfer_id(xfer), seg->index,
- atomic_read(&rpipe->segs_available), result);
- if (unlikely(result < 0)) {
- int done;
-
- spin_unlock_irqrestore(&rpipe->seg_lock, flags);
- spin_lock_irqsave(&xfer->lock, flags);
- __wa_xfer_abort(xfer);
- /*
- * This seg was marked as submitted when it was put on
- * the RPIPE seg_list. Mark it done.
- */
- xfer->segs_done++;
- done = __wa_xfer_is_done(xfer);
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (done)
- wa_xfer_completion(xfer);
- spin_lock_irqsave(&rpipe->seg_lock, flags);
- }
- wa_xfer_put(xfer);
- }
- /*
- * Mark this RPIPE as waiting if dto was not acquired, there are
- * delayed segs and no active transfers to wake us up later.
- */
- if (!dto_acquired && !list_empty(&rpipe->seg_list)
- && (atomic_read(&rpipe->segs_available) ==
- le16_to_cpu(rpipe->descr.wRequests)))
- *dto_waiting = 1;
-
- spin_unlock_irqrestore(&rpipe->seg_lock, flags);
-
- return dto_done;
-}
-
-static void wa_xfer_delayed_run(struct wa_rpipe *rpipe)
-{
- int dto_waiting;
- int dto_done = __wa_xfer_delayed_run(rpipe, &dto_waiting);
-
- /*
- * If this RPIPE is waiting on the DTO resource, add it to the tail of
- * the waiting list.
- * Otherwise, if the WA DTO resource was acquired and released by
- * __wa_xfer_delayed_run, another RPIPE may have attempted to acquire
- * DTO and failed during that time. Check the delayed list and process
- * any waiters. Start searching from the next RPIPE index.
- */
- if (dto_waiting)
- wa_add_delayed_rpipe(rpipe->wa, rpipe);
- else if (dto_done)
- wa_check_for_delayed_rpipes(rpipe->wa);
-}
-
-/*
- *
- * xfer->lock is taken
- *
- * On failure submitting we just stop submitting and return error;
- * wa_urb_enqueue_b() will execute the completion path
- */
-static int __wa_xfer_submit(struct wa_xfer *xfer)
-{
- int result, dto_acquired = 0, dto_done = 0, dto_waiting = 0;
- struct wahc *wa = xfer->wa;
- struct device *dev = &wa->usb_iface->dev;
- unsigned cnt;
- struct wa_seg *seg;
- unsigned long flags;
- struct wa_rpipe *rpipe = xfer->ep->hcpriv;
- size_t maxrequests = le16_to_cpu(rpipe->descr.wRequests);
- u8 available;
- u8 empty;
-
- spin_lock_irqsave(&wa->xfer_list_lock, flags);
- list_add_tail(&xfer->list_node, &wa->xfer_list);
- spin_unlock_irqrestore(&wa->xfer_list_lock, flags);
-
- BUG_ON(atomic_read(&rpipe->segs_available) > maxrequests);
- result = 0;
- spin_lock_irqsave(&rpipe->seg_lock, flags);
- for (cnt = 0; cnt < xfer->segs; cnt++) {
- int delay_seg = 1;
-
- available = atomic_read(&rpipe->segs_available);
- empty = list_empty(&rpipe->seg_list);
- seg = xfer->seg[cnt];
- if (available && empty) {
- /*
- * Only attempt to acquire DTO if we have a segment
- * to send.
- */
- dto_acquired = __wa_dto_try_get(rpipe->wa);
- if (dto_acquired) {
- delay_seg = 0;
- result = __wa_seg_submit(rpipe, xfer, seg,
- &dto_done);
- dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u submitted\n",
- xfer, wa_xfer_id(xfer), cnt, available,
- empty);
- if (dto_done)
- __wa_dto_put(rpipe->wa);
-
- if (result < 0) {
- __wa_xfer_abort(xfer);
- goto error_seg_submit;
- }
- }
- }
-
- if (delay_seg) {
- dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u delayed\n",
- xfer, wa_xfer_id(xfer), cnt, available, empty);
- seg->status = WA_SEG_DELAYED;
- list_add_tail(&seg->list_node, &rpipe->seg_list);
- }
- xfer->segs_submitted++;
- }
-error_seg_submit:
- /*
- * Mark this RPIPE as waiting if dto was not acquired, there are
- * delayed segs and no active transfers to wake us up later.
- */
- if (!dto_acquired && !list_empty(&rpipe->seg_list)
- && (atomic_read(&rpipe->segs_available) ==
- le16_to_cpu(rpipe->descr.wRequests)))
- dto_waiting = 1;
- spin_unlock_irqrestore(&rpipe->seg_lock, flags);
-
- if (dto_waiting)
- wa_add_delayed_rpipe(rpipe->wa, rpipe);
- else if (dto_done)
- wa_check_for_delayed_rpipes(rpipe->wa);
-
- return result;
-}
-
-/*
- * Second part of a URB/transfer enqueuement
- *
- * Assumes this comes from wa_urb_enqueue() [maybe through
- * wa_urb_enqueue_run()]. At this point:
- *
- * xfer->wa filled and refcounted
- * xfer->ep filled with rpipe refcounted if
- * delayed == 0
- * xfer->urb filled and refcounted (this is the case when called
- * from wa_urb_enqueue() as we come from usb_submit_urb()
- * and when called by wa_urb_enqueue_run(), as we took an
- * extra ref dropped by _run() after we return).
- * xfer->gfp filled
- *
- * If we fail at __wa_xfer_submit(), then we just check if we are done
- * and if so, we run the completion procedure. However, if we are not
- * yet done, we do nothing and wait for the completion handlers from
- * the submitted URBs or from the xfer-result path to kick in. If xfer
- * result never kicks in, the xfer will timeout from the USB code and
- * dequeue() will be called.
- */
-static int wa_urb_enqueue_b(struct wa_xfer *xfer)
-{
- int result;
- unsigned long flags;
- struct urb *urb = xfer->urb;
- struct wahc *wa = xfer->wa;
- struct wusbhc *wusbhc = wa->wusb;
- struct wusb_dev *wusb_dev;
- unsigned done;
-
- result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp);
- if (result < 0) {
- pr_err("%s: error_rpipe_get\n", __func__);
- goto error_rpipe_get;
- }
- result = -ENODEV;
- /* FIXME: segmentation broken -- kills DWA */
- mutex_lock(&wusbhc->mutex); /* get a WUSB dev */
- if (urb->dev == NULL) {
- mutex_unlock(&wusbhc->mutex);
- pr_err("%s: error usb dev gone\n", __func__);
- goto error_dev_gone;
- }
- wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
- if (wusb_dev == NULL) {
- mutex_unlock(&wusbhc->mutex);
- dev_err(&(urb->dev->dev), "%s: error wusb dev gone\n",
- __func__);
- goto error_dev_gone;
- }
- mutex_unlock(&wusbhc->mutex);
-
- spin_lock_irqsave(&xfer->lock, flags);
- xfer->wusb_dev = wusb_dev;
- result = urb->status;
- if (urb->status != -EINPROGRESS) {
- dev_err(&(urb->dev->dev), "%s: error_dequeued\n", __func__);
- goto error_dequeued;
- }
-
- result = __wa_xfer_setup(xfer, urb);
- if (result < 0) {
- dev_err(&(urb->dev->dev), "%s: error_xfer_setup\n", __func__);
- goto error_xfer_setup;
- }
- /*
- * Get a xfer reference since __wa_xfer_submit starts asynchronous
- * operations that may try to complete the xfer before this function
- * exits.
- */
- wa_xfer_get(xfer);
- result = __wa_xfer_submit(xfer);
- if (result < 0) {
- dev_err(&(urb->dev->dev), "%s: error_xfer_submit\n", __func__);
- goto error_xfer_submit;
- }
- spin_unlock_irqrestore(&xfer->lock, flags);
- wa_xfer_put(xfer);
- return 0;
-
- /*
- * this is basically wa_xfer_completion() broken up wa_xfer_giveback()
- * does a wa_xfer_put() that will call wa_xfer_destroy() and undo
- * setup().
- */
-error_xfer_setup:
-error_dequeued:
- spin_unlock_irqrestore(&xfer->lock, flags);
- /* FIXME: segmentation broken, kills DWA */
- if (wusb_dev)
- wusb_dev_put(wusb_dev);
-error_dev_gone:
- rpipe_put(xfer->ep->hcpriv);
-error_rpipe_get:
- xfer->result = result;
- return result;
-
-error_xfer_submit:
- done = __wa_xfer_is_done(xfer);
- xfer->result = result;
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (done)
- wa_xfer_completion(xfer);
- wa_xfer_put(xfer);
- /* return success since the completion routine will run. */
- return 0;
-}
-
-/*
- * Execute the delayed transfers in the Wire Adapter @wa
- *
- * We need to be careful here, as dequeue() could be called in the
- * middle. That's why we do the whole thing under the
- * wa->xfer_list_lock. If dequeue() jumps in, it first locks xfer->lock
- * and then checks the list -- so as we would be acquiring in inverse
- * order, we move the delayed list to a separate list while locked and then
- * submit them without the list lock held.
- */
-void wa_urb_enqueue_run(struct work_struct *ws)
-{
- struct wahc *wa = container_of(ws, struct wahc, xfer_enqueue_work);
- struct wa_xfer *xfer, *next;
- struct urb *urb;
- LIST_HEAD(tmp_list);
-
- /* Create a copy of the wa->xfer_delayed_list while holding the lock */
- spin_lock_irq(&wa->xfer_list_lock);
- list_cut_position(&tmp_list, &wa->xfer_delayed_list,
- wa->xfer_delayed_list.prev);
- spin_unlock_irq(&wa->xfer_list_lock);
-
- /*
- * enqueue from temp list without list lock held since wa_urb_enqueue_b
- * can take xfer->lock as well as lock mutexes.
- */
- list_for_each_entry_safe(xfer, next, &tmp_list, list_node) {
- list_del_init(&xfer->list_node);
-
- urb = xfer->urb;
- if (wa_urb_enqueue_b(xfer) < 0)
- wa_xfer_giveback(xfer);
- usb_put_urb(urb); /* taken when queuing */
- }
-}
-EXPORT_SYMBOL_GPL(wa_urb_enqueue_run);
-
-/*
- * Process the errored transfers on the Wire Adapter outside of interrupt.
- */
-void wa_process_errored_transfers_run(struct work_struct *ws)
-{
- struct wahc *wa = container_of(ws, struct wahc, xfer_error_work);
- struct wa_xfer *xfer, *next;
- LIST_HEAD(tmp_list);
-
- pr_info("%s: Run delayed STALL processing.\n", __func__);
-
- /* Create a copy of the wa->xfer_errored_list while holding the lock */
- spin_lock_irq(&wa->xfer_list_lock);
- list_cut_position(&tmp_list, &wa->xfer_errored_list,
- wa->xfer_errored_list.prev);
- spin_unlock_irq(&wa->xfer_list_lock);
-
- /*
- * run rpipe_clear_feature_stalled from temp list without list lock
- * held.
- */
- list_for_each_entry_safe(xfer, next, &tmp_list, list_node) {
- struct usb_host_endpoint *ep;
- unsigned long flags;
- struct wa_rpipe *rpipe;
-
- spin_lock_irqsave(&xfer->lock, flags);
- ep = xfer->ep;
- rpipe = ep->hcpriv;
- spin_unlock_irqrestore(&xfer->lock, flags);
-
- /* clear RPIPE feature stalled without holding a lock. */
- rpipe_clear_feature_stalled(wa, ep);
-
- /* complete the xfer. This removes it from the tmp list. */
- wa_xfer_completion(xfer);
-
- /* check for work. */
- wa_xfer_delayed_run(rpipe);
- }
-}
-EXPORT_SYMBOL_GPL(wa_process_errored_transfers_run);
-
-/*
- * Submit a transfer to the Wire Adapter in a delayed way
- *
- * The process of enqueuing involves possible sleeps() [see
- * enqueue_b(), for the rpipe_get() and the mutex_lock()]. If we are
- * in an atomic section, we defer the enqueue_b() call--else we call direct.
- *
- * @urb: We own a reference to it done by the HCI Linux USB stack that
- * will be given up by calling usb_hcd_giveback_urb() or by
- * returning error from this function -> ergo we don't have to
- * refcount it.
- */
-int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep,
- struct urb *urb, gfp_t gfp)
-{
- int result;
- struct device *dev = &wa->usb_iface->dev;
- struct wa_xfer *xfer;
- unsigned long my_flags;
- unsigned cant_sleep = irqs_disabled() | in_atomic();
-
- if ((urb->transfer_buffer == NULL)
- && (urb->sg == NULL)
- && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
- && urb->transfer_buffer_length != 0) {
- dev_err(dev, "BUG? urb %p: NULL xfer buffer & NODMA\n", urb);
- dump_stack();
- }
-
- spin_lock_irqsave(&wa->xfer_list_lock, my_flags);
- result = usb_hcd_link_urb_to_ep(&(wa->wusb->usb_hcd), urb);
- spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags);
- if (result < 0)
- goto error_link_urb;
-
- result = -ENOMEM;
- xfer = kzalloc(sizeof(*xfer), gfp);
- if (xfer == NULL)
- goto error_kmalloc;
-
- result = -ENOENT;
- if (urb->status != -EINPROGRESS) /* cancelled */
- goto error_dequeued; /* before starting? */
- wa_xfer_init(xfer);
- xfer->wa = wa_get(wa);
- xfer->urb = urb;
- xfer->gfp = gfp;
- xfer->ep = ep;
- urb->hcpriv = xfer;
-
- dev_dbg(dev, "xfer %p urb %p pipe 0x%02x [%d bytes] %s %s %s\n",
- xfer, urb, urb->pipe, urb->transfer_buffer_length,
- urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? "dma" : "nodma",
- urb->pipe & USB_DIR_IN ? "inbound" : "outbound",
- cant_sleep ? "deferred" : "inline");
-
- if (cant_sleep) {
- usb_get_urb(urb);
- spin_lock_irqsave(&wa->xfer_list_lock, my_flags);
- list_add_tail(&xfer->list_node, &wa->xfer_delayed_list);
- spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags);
- queue_work(wusbd, &wa->xfer_enqueue_work);
- } else {
- result = wa_urb_enqueue_b(xfer);
- if (result < 0) {
- /*
- * URB submit/enqueue failed. Clean up, return an
- * error and do not run the callback. This avoids
- * an infinite submit/complete loop.
- */
- dev_err(dev, "%s: URB enqueue failed: %d\n",
- __func__, result);
- wa_put(xfer->wa);
- wa_xfer_put(xfer);
- spin_lock_irqsave(&wa->xfer_list_lock, my_flags);
- usb_hcd_unlink_urb_from_ep(&(wa->wusb->usb_hcd), urb);
- spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags);
- return result;
- }
- }
- return 0;
-
-error_dequeued:
- kfree(xfer);
-error_kmalloc:
- spin_lock_irqsave(&wa->xfer_list_lock, my_flags);
- usb_hcd_unlink_urb_from_ep(&(wa->wusb->usb_hcd), urb);
- spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags);
-error_link_urb:
- return result;
-}
-EXPORT_SYMBOL_GPL(wa_urb_enqueue);
-
-/*
- * Dequeue a URB and make sure uwb_hcd_giveback_urb() [completion
- * handler] is called.
- *
- * Until a transfer goes successfully through wa_urb_enqueue() it
- * needs to be dequeued with completion calling; when stuck in delayed
- * or before wa_xfer_setup() is called, we need to do completion.
- *
- * not setup If there is no hcpriv yet, that means that that enqueue
- * still had no time to set the xfer up. Because
- * urb->status should be other than -EINPROGRESS,
- * enqueue() will catch that and bail out.
- *
- * If the transfer has gone through setup, we just need to clean it
- * up. If it has gone through submit(), we have to abort it [with an
- * asynch request] and then make sure we cancel each segment.
- *
- */
-int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status)
-{
- unsigned long flags;
- struct wa_xfer *xfer;
- struct wa_seg *seg;
- struct wa_rpipe *rpipe;
- unsigned cnt, done = 0, xfer_abort_pending;
- unsigned rpipe_ready = 0;
- int result;
-
- /* check if it is safe to unlink. */
- spin_lock_irqsave(&wa->xfer_list_lock, flags);
- result = usb_hcd_check_unlink_urb(&(wa->wusb->usb_hcd), urb, status);
- if ((result == 0) && urb->hcpriv) {
- /*
- * Get a xfer ref to prevent a race with wa_xfer_giveback
- * cleaning up the xfer while we are working with it.
- */
- wa_xfer_get(urb->hcpriv);
- }
- spin_unlock_irqrestore(&wa->xfer_list_lock, flags);
- if (result)
- return result;
-
- xfer = urb->hcpriv;
- if (xfer == NULL)
- return -ENOENT;
- spin_lock_irqsave(&xfer->lock, flags);
- pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer));
- rpipe = xfer->ep->hcpriv;
- if (rpipe == NULL) {
- pr_debug("%s: xfer %p id 0x%08X has no RPIPE. %s",
- __func__, xfer, wa_xfer_id(xfer),
- "Probably already aborted.\n" );
- result = -ENOENT;
- goto out_unlock;
- }
- /*
- * Check for done to avoid racing with wa_xfer_giveback and completing
- * twice.
- */
- if (__wa_xfer_is_done(xfer)) {
- pr_debug("%s: xfer %p id 0x%08X already done.\n", __func__,
- xfer, wa_xfer_id(xfer));
- result = -ENOENT;
- goto out_unlock;
- }
- /* Check the delayed list -> if there, release and complete */
- spin_lock(&wa->xfer_list_lock);
- if (!list_empty(&xfer->list_node) && xfer->seg == NULL)
- goto dequeue_delayed;
- spin_unlock(&wa->xfer_list_lock);
- if (xfer->seg == NULL) /* still hasn't reached */
- goto out_unlock; /* setup(), enqueue_b() completes */
- /* Ok, the xfer is in flight already, it's been setup and submitted.*/
- xfer_abort_pending = __wa_xfer_abort(xfer) >= 0;
- /*
- * grab the rpipe->seg_lock here to prevent racing with
- * __wa_xfer_delayed_run.
- */
- spin_lock(&rpipe->seg_lock);
- for (cnt = 0; cnt < xfer->segs; cnt++) {
- seg = xfer->seg[cnt];
- pr_debug("%s: xfer id 0x%08X#%d status = %d\n",
- __func__, wa_xfer_id(xfer), cnt, seg->status);
- switch (seg->status) {
- case WA_SEG_NOTREADY:
- case WA_SEG_READY:
- printk(KERN_ERR "xfer %p#%u: dequeue bad state %u\n",
- xfer, cnt, seg->status);
- WARN_ON(1);
- break;
- case WA_SEG_DELAYED:
- /*
- * delete from rpipe delayed list. If no segments on
- * this xfer have been submitted, __wa_xfer_is_done will
- * trigger a giveback below. Otherwise, the submitted
- * segments will be completed in the DTI interrupt.
- */
- seg->status = WA_SEG_ABORTED;
- seg->result = -ENOENT;
- list_del(&seg->list_node);
- xfer->segs_done++;
- break;
- case WA_SEG_DONE:
- case WA_SEG_ERROR:
- case WA_SEG_ABORTED:
- break;
- /*
- * The buf_in data for a segment in the
- * WA_SEG_DTI_PENDING state is actively being read.
- * Let wa_buf_in_cb handle it since it will be called
- * and will increment xfer->segs_done. Cleaning up
- * here could cause wa_buf_in_cb to access the xfer
- * after it has been completed/freed.
- */
- case WA_SEG_DTI_PENDING:
- break;
- /*
- * In the states below, the HWA device already knows
- * about the transfer. If an abort request was sent,
- * allow the HWA to process it and wait for the
- * results. Otherwise, the DTI state and seg completed
- * counts can get out of sync.
- */
- case WA_SEG_SUBMITTED:
- case WA_SEG_PENDING:
- /*
- * Check if the abort was successfully sent. This could
- * be false if the HWA has been removed but we haven't
- * gotten the disconnect notification yet.
- */
- if (!xfer_abort_pending) {
- seg->status = WA_SEG_ABORTED;
- rpipe_ready = rpipe_avail_inc(rpipe);
- xfer->segs_done++;
- }
- break;
- }
- }
- spin_unlock(&rpipe->seg_lock);
- xfer->result = urb->status; /* -ENOENT or -ECONNRESET */
- done = __wa_xfer_is_done(xfer);
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (done)
- wa_xfer_completion(xfer);
- if (rpipe_ready)
- wa_xfer_delayed_run(rpipe);
- wa_xfer_put(xfer);
- return result;
-
-out_unlock:
- spin_unlock_irqrestore(&xfer->lock, flags);
- wa_xfer_put(xfer);
- return result;
-
-dequeue_delayed:
- list_del_init(&xfer->list_node);
- spin_unlock(&wa->xfer_list_lock);
- xfer->result = urb->status;
- spin_unlock_irqrestore(&xfer->lock, flags);
- wa_xfer_giveback(xfer);
- wa_xfer_put(xfer);
- usb_put_urb(urb); /* we got a ref in enqueue() */
- return 0;
-}
-EXPORT_SYMBOL_GPL(wa_urb_dequeue);
-
-/*
- * Translation from WA status codes (WUSB1.0 Table 8.15) to errno
- * codes
- *
- * Positive errno values are internal inconsistencies and should be
- * flagged louder. Negative are to be passed up to the user in the
- * normal way.
- *
- * @status: USB WA status code -- high two bits are stripped.
- */
-static int wa_xfer_status_to_errno(u8 status)
-{
- int errno;
- u8 real_status = status;
- static int xlat[] = {
- [WA_XFER_STATUS_SUCCESS] = 0,
- [WA_XFER_STATUS_HALTED] = -EPIPE,
- [WA_XFER_STATUS_DATA_BUFFER_ERROR] = -ENOBUFS,
- [WA_XFER_STATUS_BABBLE] = -EOVERFLOW,
- [WA_XFER_RESERVED] = EINVAL,
- [WA_XFER_STATUS_NOT_FOUND] = 0,
- [WA_XFER_STATUS_INSUFFICIENT_RESOURCE] = -ENOMEM,
- [WA_XFER_STATUS_TRANSACTION_ERROR] = -EILSEQ,
- [WA_XFER_STATUS_ABORTED] = -ENOENT,
- [WA_XFER_STATUS_RPIPE_NOT_READY] = EINVAL,
- [WA_XFER_INVALID_FORMAT] = EINVAL,
- [WA_XFER_UNEXPECTED_SEGMENT_NUMBER] = EINVAL,
- [WA_XFER_STATUS_RPIPE_TYPE_MISMATCH] = EINVAL,
- };
- status &= 0x3f;
-
- if (status == 0)
- return 0;
- if (status >= ARRAY_SIZE(xlat)) {
- printk_ratelimited(KERN_ERR "%s(): BUG? "
- "Unknown WA transfer status 0x%02x\n",
- __func__, real_status);
- return -EINVAL;
- }
- errno = xlat[status];
- if (unlikely(errno > 0)) {
- printk_ratelimited(KERN_ERR "%s(): BUG? "
- "Inconsistent WA status: 0x%02x\n",
- __func__, real_status);
- errno = -errno;
- }
- return errno;
-}
-
-/*
- * If a last segment flag and/or a transfer result error is encountered,
- * no other segment transfer results will be returned from the device.
- * Mark the remaining submitted or pending xfers as completed so that
- * the xfer will complete cleanly.
- *
- * xfer->lock must be held
- *
- */
-static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
- int starting_index, enum wa_seg_status status)
-{
- int index;
- struct wa_rpipe *rpipe = xfer->ep->hcpriv;
-
- for (index = starting_index; index < xfer->segs_submitted; index++) {
- struct wa_seg *current_seg = xfer->seg[index];
-
- BUG_ON(current_seg == NULL);
-
- switch (current_seg->status) {
- case WA_SEG_SUBMITTED:
- case WA_SEG_PENDING:
- case WA_SEG_DTI_PENDING:
- rpipe_avail_inc(rpipe);
- /*
- * do not increment RPIPE avail for the WA_SEG_DELAYED case
- * since it has not been submitted to the RPIPE.
- */
- /* fall through */
- case WA_SEG_DELAYED:
- xfer->segs_done++;
- current_seg->status = status;
- break;
- case WA_SEG_ABORTED:
- break;
- default:
- WARN(1, "%s: xfer 0x%08X#%d. bad seg status = %d\n",
- __func__, wa_xfer_id(xfer), index,
- current_seg->status);
- break;
- }
- }
-}
-
-/* Populate the given urb based on the current isoc transfer state. */
-static int __wa_populate_buf_in_urb_isoc(struct wahc *wa,
- struct urb *buf_in_urb, struct wa_xfer *xfer, struct wa_seg *seg)
-{
- int urb_start_frame = seg->isoc_frame_index + seg->isoc_frame_offset;
- int seg_index, total_len = 0, urb_frame_index = urb_start_frame;
- struct usb_iso_packet_descriptor *iso_frame_desc =
- xfer->urb->iso_frame_desc;
- const int dti_packet_size = usb_endpoint_maxp(wa->dti_epd);
- int next_frame_contiguous;
- struct usb_iso_packet_descriptor *iso_frame;
-
- BUG_ON(buf_in_urb->status == -EINPROGRESS);
-
- /*
- * If the current frame actual_length is contiguous with the next frame
- * and actual_length is a multiple of the DTI endpoint max packet size,
- * combine the current frame with the next frame in a single URB. This
- * reduces the number of URBs that must be submitted in that case.
- */
- seg_index = seg->isoc_frame_index;
- do {
- next_frame_contiguous = 0;
-
- iso_frame = &iso_frame_desc[urb_frame_index];
- total_len += iso_frame->actual_length;
- ++urb_frame_index;
- ++seg_index;
-
- if (seg_index < seg->isoc_frame_count) {
- struct usb_iso_packet_descriptor *next_iso_frame;
-
- next_iso_frame = &iso_frame_desc[urb_frame_index];
-
- if ((iso_frame->offset + iso_frame->actual_length) ==
- next_iso_frame->offset)
- next_frame_contiguous = 1;
- }
- } while (next_frame_contiguous
- && ((iso_frame->actual_length % dti_packet_size) == 0));
-
- /* this should always be 0 before a resubmit. */
- buf_in_urb->num_mapped_sgs = 0;
- buf_in_urb->transfer_dma = xfer->urb->transfer_dma +
- iso_frame_desc[urb_start_frame].offset;
- buf_in_urb->transfer_buffer_length = total_len;
- buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- buf_in_urb->transfer_buffer = NULL;
- buf_in_urb->sg = NULL;
- buf_in_urb->num_sgs = 0;
- buf_in_urb->context = seg;
-
- /* return the number of frames included in this URB. */
- return seg_index - seg->isoc_frame_index;
-}
-
-/* Populate the given urb based on the current transfer state. */
-static int wa_populate_buf_in_urb(struct urb *buf_in_urb, struct wa_xfer *xfer,
- unsigned int seg_idx, unsigned int bytes_transferred)
-{
- int result = 0;
- struct wa_seg *seg = xfer->seg[seg_idx];
-
- BUG_ON(buf_in_urb->status == -EINPROGRESS);
- /* this should always be 0 before a resubmit. */
- buf_in_urb->num_mapped_sgs = 0;
-
- if (xfer->is_dma) {
- buf_in_urb->transfer_dma = xfer->urb->transfer_dma
- + (seg_idx * xfer->seg_size);
- buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- buf_in_urb->transfer_buffer = NULL;
- buf_in_urb->sg = NULL;
- buf_in_urb->num_sgs = 0;
- } else {
- /* do buffer or SG processing. */
- buf_in_urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP;
-
- if (xfer->urb->transfer_buffer) {
- buf_in_urb->transfer_buffer =
- xfer->urb->transfer_buffer
- + (seg_idx * xfer->seg_size);
- buf_in_urb->sg = NULL;
- buf_in_urb->num_sgs = 0;
- } else {
- /* allocate an SG list to store seg_size bytes
- and copy the subset of the xfer->urb->sg
- that matches the buffer subset we are
- about to read. */
- buf_in_urb->sg = wa_xfer_create_subset_sg(
- xfer->urb->sg,
- seg_idx * xfer->seg_size,
- bytes_transferred,
- &(buf_in_urb->num_sgs));
-
- if (!(buf_in_urb->sg)) {
- buf_in_urb->num_sgs = 0;
- result = -ENOMEM;
- }
- buf_in_urb->transfer_buffer = NULL;
- }
- }
- buf_in_urb->transfer_buffer_length = bytes_transferred;
- buf_in_urb->context = seg;
-
- return result;
-}
-
-/*
- * Process a xfer result completion message
- *
- * inbound transfers: need to schedule a buf_in_urb read
- *
- * FIXME: this function needs to be broken up in parts
- */
-static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer,
- struct wa_xfer_result *xfer_result)
-{
- int result;
- struct device *dev = &wa->usb_iface->dev;
- unsigned long flags;
- unsigned int seg_idx;
- struct wa_seg *seg;
- struct wa_rpipe *rpipe;
- unsigned done = 0;
- u8 usb_status;
- unsigned rpipe_ready = 0;
- unsigned bytes_transferred = le32_to_cpu(xfer_result->dwTransferLength);
- struct urb *buf_in_urb = &(wa->buf_in_urbs[0]);
-
- spin_lock_irqsave(&xfer->lock, flags);
- seg_idx = xfer_result->bTransferSegment & 0x7f;
- if (unlikely(seg_idx >= xfer->segs))
- goto error_bad_seg;
- seg = xfer->seg[seg_idx];
- rpipe = xfer->ep->hcpriv;
- usb_status = xfer_result->bTransferStatus;
- dev_dbg(dev, "xfer %p ID 0x%08X#%u: bTransferStatus 0x%02x (seg status %u)\n",
- xfer, wa_xfer_id(xfer), seg_idx, usb_status, seg->status);
- if (seg->status == WA_SEG_ABORTED
- || seg->status == WA_SEG_ERROR) /* already handled */
- goto segment_aborted;
- if (seg->status == WA_SEG_SUBMITTED) /* ops, got here */
- seg->status = WA_SEG_PENDING; /* before wa_seg{_dto}_cb() */
- if (seg->status != WA_SEG_PENDING) {
- if (printk_ratelimit())
- dev_err(dev, "xfer %p#%u: Bad segment state %u\n",
- xfer, seg_idx, seg->status);
- seg->status = WA_SEG_PENDING; /* workaround/"fix" it */
- }
- if (usb_status & 0x80) {
- seg->result = wa_xfer_status_to_errno(usb_status);
- dev_err(dev, "DTI: xfer %p 0x%08X:#%u failed (0x%02x)\n",
- xfer, xfer->id, seg->index, usb_status);
- seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ?
- WA_SEG_ABORTED : WA_SEG_ERROR;
- goto error_complete;
- }
- /* FIXME: we ignore warnings, tally them for stats */
- if (usb_status & 0x40) /* Warning?... */
- usb_status = 0; /* ... pass */
- /*
- * If the last segment bit is set, complete the remaining segments.
- * When the current segment is completed, either in wa_buf_in_cb for
- * transfers with data or below for no data, the xfer will complete.
- */
- if (xfer_result->bTransferSegment & 0x80)
- wa_complete_remaining_xfer_segs(xfer, seg->index + 1,
- WA_SEG_DONE);
- if (usb_pipeisoc(xfer->urb->pipe)
- && (le32_to_cpu(xfer_result->dwNumOfPackets) > 0)) {
- /* set up WA state to read the isoc packet status next. */
- wa->dti_isoc_xfer_in_progress = wa_xfer_id(xfer);
- wa->dti_isoc_xfer_seg = seg_idx;
- wa->dti_state = WA_DTI_ISOC_PACKET_STATUS_PENDING;
- } else if (xfer->is_inbound && !usb_pipeisoc(xfer->urb->pipe)
- && (bytes_transferred > 0)) {
- /* IN data phase: read to buffer */
- seg->status = WA_SEG_DTI_PENDING;
- result = wa_populate_buf_in_urb(buf_in_urb, xfer, seg_idx,
- bytes_transferred);
- if (result < 0)
- goto error_buf_in_populate;
- ++(wa->active_buf_in_urbs);
- result = usb_submit_urb(buf_in_urb, GFP_ATOMIC);
- if (result < 0) {
- --(wa->active_buf_in_urbs);
- goto error_submit_buf_in;
- }
- } else {
- /* OUT data phase or no data, complete it -- */
- seg->result = bytes_transferred;
- rpipe_ready = rpipe_avail_inc(rpipe);
- done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE);
- }
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (done)
- wa_xfer_completion(xfer);
- if (rpipe_ready)
- wa_xfer_delayed_run(rpipe);
- return;
-
-error_submit_buf_in:
- if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
- dev_err(dev, "DTI: URB max acceptable errors "
- "exceeded, resetting device\n");
- wa_reset_all(wa);
- }
- if (printk_ratelimit())
- dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n",
- xfer, seg_idx, result);
- seg->result = result;
- kfree(buf_in_urb->sg);
- buf_in_urb->sg = NULL;
-error_buf_in_populate:
- __wa_xfer_abort(xfer);
- seg->status = WA_SEG_ERROR;
-error_complete:
- xfer->segs_done++;
- rpipe_ready = rpipe_avail_inc(rpipe);
- wa_complete_remaining_xfer_segs(xfer, seg->index + 1, seg->status);
- done = __wa_xfer_is_done(xfer);
- /*
- * queue work item to clear STALL for control endpoints.
- * Otherwise, let endpoint_reset take care of it.
- */
- if (((usb_status & 0x3f) == WA_XFER_STATUS_HALTED) &&
- usb_endpoint_xfer_control(&xfer->ep->desc) &&
- done) {
-
- dev_info(dev, "Control EP stall. Queue delayed work.\n");
- spin_lock(&wa->xfer_list_lock);
- /* move xfer from xfer_list to xfer_errored_list. */
- list_move_tail(&xfer->list_node, &wa->xfer_errored_list);
- spin_unlock(&wa->xfer_list_lock);
- spin_unlock_irqrestore(&xfer->lock, flags);
- queue_work(wusbd, &wa->xfer_error_work);
- } else {
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (done)
- wa_xfer_completion(xfer);
- if (rpipe_ready)
- wa_xfer_delayed_run(rpipe);
- }
-
- return;
-
-error_bad_seg:
- spin_unlock_irqrestore(&xfer->lock, flags);
- wa_urb_dequeue(wa, xfer->urb, -ENOENT);
- if (printk_ratelimit())
- dev_err(dev, "xfer %p#%u: bad segment\n", xfer, seg_idx);
- if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
- dev_err(dev, "DTI: URB max acceptable errors "
- "exceeded, resetting device\n");
- wa_reset_all(wa);
- }
- return;
-
-segment_aborted:
- /* nothing to do, as the aborter did the completion */
- spin_unlock_irqrestore(&xfer->lock, flags);
-}
-
-/*
- * Process a isochronous packet status message
- *
- * inbound transfers: need to schedule a buf_in_urb read
- */
-static int wa_process_iso_packet_status(struct wahc *wa, struct urb *urb)
-{
- struct device *dev = &wa->usb_iface->dev;
- struct wa_xfer_packet_status_hwaiso *packet_status;
- struct wa_xfer_packet_status_len_hwaiso *status_array;
- struct wa_xfer *xfer;
- unsigned long flags;
- struct wa_seg *seg;
- struct wa_rpipe *rpipe;
- unsigned done = 0, dti_busy = 0, data_frame_count = 0, seg_index;
- unsigned first_frame_index = 0, rpipe_ready = 0;
- size_t expected_size;
-
- /* We have a xfer result buffer; check it */
- dev_dbg(dev, "DTI: isoc packet status %d bytes at %p\n",
- urb->actual_length, urb->transfer_buffer);
- packet_status = (struct wa_xfer_packet_status_hwaiso *)(wa->dti_buf);
- if (packet_status->bPacketType != WA_XFER_ISO_PACKET_STATUS) {
- dev_err(dev, "DTI Error: isoc packet status--bad type 0x%02x\n",
- packet_status->bPacketType);
- goto error_parse_buffer;
- }
- xfer = wa_xfer_get_by_id(wa, wa->dti_isoc_xfer_in_progress);
- if (xfer == NULL) {
- dev_err(dev, "DTI Error: isoc packet status--unknown xfer 0x%08x\n",
- wa->dti_isoc_xfer_in_progress);
- goto error_parse_buffer;
- }
- spin_lock_irqsave(&xfer->lock, flags);
- if (unlikely(wa->dti_isoc_xfer_seg >= xfer->segs))
- goto error_bad_seg;
- seg = xfer->seg[wa->dti_isoc_xfer_seg];
- rpipe = xfer->ep->hcpriv;
- expected_size = struct_size(packet_status, PacketStatus,
- seg->isoc_frame_count);
- if (urb->actual_length != expected_size) {
- dev_err(dev, "DTI Error: isoc packet status--bad urb length (%d bytes vs %zu needed)\n",
- urb->actual_length, expected_size);
- goto error_bad_seg;
- }
- if (le16_to_cpu(packet_status->wLength) != expected_size) {
- dev_err(dev, "DTI Error: isoc packet status--bad length %u\n",
- le16_to_cpu(packet_status->wLength));
- goto error_bad_seg;
- }
- /* write isoc packet status and lengths back to the xfer urb. */
- status_array = packet_status->PacketStatus;
- xfer->urb->start_frame =
- wa->wusb->usb_hcd.driver->get_frame_number(&wa->wusb->usb_hcd);
- for (seg_index = 0; seg_index < seg->isoc_frame_count; ++seg_index) {
- struct usb_iso_packet_descriptor *iso_frame_desc =
- xfer->urb->iso_frame_desc;
- const int xfer_frame_index =
- seg->isoc_frame_offset + seg_index;
-
- iso_frame_desc[xfer_frame_index].status =
- wa_xfer_status_to_errno(
- le16_to_cpu(status_array[seg_index].PacketStatus));
- iso_frame_desc[xfer_frame_index].actual_length =
- le16_to_cpu(status_array[seg_index].PacketLength);
- /* track the number of frames successfully transferred. */
- if (iso_frame_desc[xfer_frame_index].actual_length > 0) {
- /* save the starting frame index for buf_in_urb. */
- if (!data_frame_count)
- first_frame_index = seg_index;
- ++data_frame_count;
- }
- }
-
- if (xfer->is_inbound && data_frame_count) {
- int result, total_frames_read = 0, urb_index = 0;
- struct urb *buf_in_urb;
-
- /* IN data phase: read to buffer */
- seg->status = WA_SEG_DTI_PENDING;
-
- /* start with the first frame with data. */
- seg->isoc_frame_index = first_frame_index;
- /* submit up to WA_MAX_BUF_IN_URBS read URBs. */
- do {
- int urb_frame_index, urb_frame_count;
- struct usb_iso_packet_descriptor *iso_frame_desc;
-
- buf_in_urb = &(wa->buf_in_urbs[urb_index]);
- urb_frame_count = __wa_populate_buf_in_urb_isoc(wa,
- buf_in_urb, xfer, seg);
- /* advance frame index to start of next read URB. */
- seg->isoc_frame_index += urb_frame_count;
- total_frames_read += urb_frame_count;
-
- ++(wa->active_buf_in_urbs);
- result = usb_submit_urb(buf_in_urb, GFP_ATOMIC);
-
- /* skip 0-byte frames. */
- urb_frame_index =
- seg->isoc_frame_offset + seg->isoc_frame_index;
- iso_frame_desc =
- &(xfer->urb->iso_frame_desc[urb_frame_index]);
- while ((seg->isoc_frame_index <
- seg->isoc_frame_count) &&
- (iso_frame_desc->actual_length == 0)) {
- ++(seg->isoc_frame_index);
- ++iso_frame_desc;
- }
- ++urb_index;
-
- } while ((result == 0) && (urb_index < WA_MAX_BUF_IN_URBS)
- && (seg->isoc_frame_index <
- seg->isoc_frame_count));
-
- if (result < 0) {
- --(wa->active_buf_in_urbs);
- dev_err(dev, "DTI Error: Could not submit buf in URB (%d)",
- result);
- wa_reset_all(wa);
- } else if (data_frame_count > total_frames_read)
- /* If we need to read more frames, set DTI busy. */
- dti_busy = 1;
- } else {
- /* OUT transfer or no more IN data, complete it -- */
- rpipe_ready = rpipe_avail_inc(rpipe);
- done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE);
- }
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (dti_busy)
- wa->dti_state = WA_DTI_BUF_IN_DATA_PENDING;
- else
- wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING;
- if (done)
- wa_xfer_completion(xfer);
- if (rpipe_ready)
- wa_xfer_delayed_run(rpipe);
- wa_xfer_put(xfer);
- return dti_busy;
-
-error_bad_seg:
- spin_unlock_irqrestore(&xfer->lock, flags);
- wa_xfer_put(xfer);
-error_parse_buffer:
- return dti_busy;
-}
-
-/*
- * Callback for the IN data phase
- *
- * If successful transition state; otherwise, take a note of the
- * error, mark this segment done and try completion.
- *
- * Note we don't access until we are sure that the transfer hasn't
- * been cancelled (ECONNRESET, ENOENT), which could mean that
- * seg->xfer could be already gone.
- */
-static void wa_buf_in_cb(struct urb *urb)
-{
- struct wa_seg *seg = urb->context;
- struct wa_xfer *xfer = seg->xfer;
- struct wahc *wa;
- struct device *dev;
- struct wa_rpipe *rpipe;
- unsigned rpipe_ready = 0, isoc_data_frame_count = 0;
- unsigned long flags;
- int resubmit_dti = 0, active_buf_in_urbs;
- u8 done = 0;
-
- /* free the sg if it was used. */
- kfree(urb->sg);
- urb->sg = NULL;
-
- spin_lock_irqsave(&xfer->lock, flags);
- wa = xfer->wa;
- dev = &wa->usb_iface->dev;
- --(wa->active_buf_in_urbs);
- active_buf_in_urbs = wa->active_buf_in_urbs;
- rpipe = xfer->ep->hcpriv;
-
- if (usb_pipeisoc(xfer->urb->pipe)) {
- struct usb_iso_packet_descriptor *iso_frame_desc =
- xfer->urb->iso_frame_desc;
- int seg_index;
-
- /*
- * Find the next isoc frame with data and count how many
- * frames with data remain.
- */
- seg_index = seg->isoc_frame_index;
- while (seg_index < seg->isoc_frame_count) {
- const int urb_frame_index =
- seg->isoc_frame_offset + seg_index;
-
- if (iso_frame_desc[urb_frame_index].actual_length > 0) {
- /* save the index of the next frame with data */
- if (!isoc_data_frame_count)
- seg->isoc_frame_index = seg_index;
- ++isoc_data_frame_count;
- }
- ++seg_index;
- }
- }
- spin_unlock_irqrestore(&xfer->lock, flags);
-
- switch (urb->status) {
- case 0:
- spin_lock_irqsave(&xfer->lock, flags);
-
- seg->result += urb->actual_length;
- if (isoc_data_frame_count > 0) {
- int result, urb_frame_count;
-
- /* submit a read URB for the next frame with data. */
- urb_frame_count = __wa_populate_buf_in_urb_isoc(wa, urb,
- xfer, seg);
- /* advance index to start of next read URB. */
- seg->isoc_frame_index += urb_frame_count;
- ++(wa->active_buf_in_urbs);
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result < 0) {
- --(wa->active_buf_in_urbs);
- dev_err(dev, "DTI Error: Could not submit buf in URB (%d)",
- result);
- wa_reset_all(wa);
- }
- /*
- * If we are in this callback and
- * isoc_data_frame_count > 0, it means that the dti_urb
- * submission was delayed in wa_dti_cb. Once
- * we submit the last buf_in_urb, we can submit the
- * delayed dti_urb.
- */
- resubmit_dti = (isoc_data_frame_count ==
- urb_frame_count);
- } else if (active_buf_in_urbs == 0) {
- dev_dbg(dev,
- "xfer %p 0x%08X#%u: data in done (%zu bytes)\n",
- xfer, wa_xfer_id(xfer), seg->index,
- seg->result);
- rpipe_ready = rpipe_avail_inc(rpipe);
- done = __wa_xfer_mark_seg_as_done(xfer, seg,
- WA_SEG_DONE);
- }
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (done)
- wa_xfer_completion(xfer);
- if (rpipe_ready)
- wa_xfer_delayed_run(rpipe);
- break;
- case -ECONNRESET: /* URB unlinked; no need to do anything */
- case -ENOENT: /* as it was done by the who unlinked us */
- break;
- default: /* Other errors ... */
- /*
- * Error on data buf read. Only resubmit DTI if it hasn't
- * already been done by previously hitting this error or by a
- * successful completion of the previous buf_in_urb.
- */
- resubmit_dti = wa->dti_state != WA_DTI_TRANSFER_RESULT_PENDING;
- spin_lock_irqsave(&xfer->lock, flags);
- if (printk_ratelimit())
- dev_err(dev, "xfer %p 0x%08X#%u: data in error %d\n",
- xfer, wa_xfer_id(xfer), seg->index,
- urb->status);
- if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
- EDC_ERROR_TIMEFRAME)){
- dev_err(dev, "DTO: URB max acceptable errors "
- "exceeded, resetting device\n");
- wa_reset_all(wa);
- }
- seg->result = urb->status;
- rpipe_ready = rpipe_avail_inc(rpipe);
- if (active_buf_in_urbs == 0)
- done = __wa_xfer_mark_seg_as_done(xfer, seg,
- WA_SEG_ERROR);
- else
- __wa_xfer_abort(xfer);
- spin_unlock_irqrestore(&xfer->lock, flags);
- if (done)
- wa_xfer_completion(xfer);
- if (rpipe_ready)
- wa_xfer_delayed_run(rpipe);
- }
-
- if (resubmit_dti) {
- int result;
-
- wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING;
-
- result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC);
- if (result < 0) {
- dev_err(dev, "DTI Error: Could not submit DTI URB (%d)\n",
- result);
- wa_reset_all(wa);
- }
- }
-}
-
-/*
- * Handle an incoming transfer result buffer
- *
- * Given a transfer result buffer, it completes the transfer (possibly
- * scheduling and buffer in read) and then resubmits the DTI URB for a
- * new transfer result read.
- *
- *
- * The xfer_result DTI URB state machine
- *
- * States: OFF | RXR (Read-Xfer-Result) | RBI (Read-Buffer-In)
- *
- * We start in OFF mode, the first xfer_result notification [through
- * wa_handle_notif_xfer()] moves us to RXR by posting the DTI-URB to
- * read.
- *
- * We receive a buffer -- if it is not a xfer_result, we complain and
- * repost the DTI-URB. If it is a xfer_result then do the xfer seg
- * request accounting. If it is an IN segment, we move to RBI and post
- * a BUF-IN-URB to the right buffer. The BUF-IN-URB callback will
- * repost the DTI-URB and move to RXR state. if there was no IN
- * segment, it will repost the DTI-URB.
- *
- * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many
- * errors) in the URBs.
- */
-static void wa_dti_cb(struct urb *urb)
-{
- int result, dti_busy = 0;
- struct wahc *wa = urb->context;
- struct device *dev = &wa->usb_iface->dev;
- u32 xfer_id;
- u8 usb_status;
-
- BUG_ON(wa->dti_urb != urb);
- switch (wa->dti_urb->status) {
- case 0:
- if (wa->dti_state == WA_DTI_TRANSFER_RESULT_PENDING) {
- struct wa_xfer_result *xfer_result;
- struct wa_xfer *xfer;
-
- /* We have a xfer result buffer; check it */
- dev_dbg(dev, "DTI: xfer result %d bytes at %p\n",
- urb->actual_length, urb->transfer_buffer);
- if (urb->actual_length != sizeof(*xfer_result)) {
- dev_err(dev, "DTI Error: xfer result--bad size xfer result (%d bytes vs %zu needed)\n",
- urb->actual_length,
- sizeof(*xfer_result));
- break;
- }
- xfer_result = (struct wa_xfer_result *)(wa->dti_buf);
- if (xfer_result->hdr.bLength != sizeof(*xfer_result)) {
- dev_err(dev, "DTI Error: xfer result--bad header length %u\n",
- xfer_result->hdr.bLength);
- break;
- }
- if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) {
- dev_err(dev, "DTI Error: xfer result--bad header type 0x%02x\n",
- xfer_result->hdr.bNotifyType);
- break;
- }
- xfer_id = le32_to_cpu(xfer_result->dwTransferID);
- usb_status = xfer_result->bTransferStatus & 0x3f;
- if (usb_status == WA_XFER_STATUS_NOT_FOUND) {
- /* taken care of already */
- dev_dbg(dev, "%s: xfer 0x%08X#%u not found.\n",
- __func__, xfer_id,
- xfer_result->bTransferSegment & 0x7f);
- break;
- }
- xfer = wa_xfer_get_by_id(wa, xfer_id);
- if (xfer == NULL) {
- /* FIXME: transaction not found. */
- dev_err(dev, "DTI Error: xfer result--unknown xfer 0x%08x (status 0x%02x)\n",
- xfer_id, usb_status);
- break;
- }
- wa_xfer_result_chew(wa, xfer, xfer_result);
- wa_xfer_put(xfer);
- } else if (wa->dti_state == WA_DTI_ISOC_PACKET_STATUS_PENDING) {
- dti_busy = wa_process_iso_packet_status(wa, urb);
- } else {
- dev_err(dev, "DTI Error: unexpected EP state = %d\n",
- wa->dti_state);
- }
- break;
- case -ENOENT: /* (we killed the URB)...so, no broadcast */
- case -ESHUTDOWN: /* going away! */
- dev_dbg(dev, "DTI: going down! %d\n", urb->status);
- goto out;
- default:
- /* Unknown error */
- if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS,
- EDC_ERROR_TIMEFRAME)) {
- dev_err(dev, "DTI: URB max acceptable errors "
- "exceeded, resetting device\n");
- wa_reset_all(wa);
- goto out;
- }
- if (printk_ratelimit())
- dev_err(dev, "DTI: URB error %d\n", urb->status);
- break;
- }
-
- /* Resubmit the DTI URB if we are not busy processing isoc in frames. */
- if (!dti_busy) {
- result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC);
- if (result < 0) {
- dev_err(dev, "DTI Error: Could not submit DTI URB (%d)\n",
- result);
- wa_reset_all(wa);
- }
- }
-out:
- return;
-}
-
-/*
- * Initialize the DTI URB for reading transfer result notifications and also
- * the buffer-in URB, for reading buffers. Then we just submit the DTI URB.
- */
-int wa_dti_start(struct wahc *wa)
-{
- const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd;
- struct device *dev = &wa->usb_iface->dev;
- int result = -ENOMEM, index;
-
- if (wa->dti_urb != NULL) /* DTI URB already started */
- goto out;
-
- wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (wa->dti_urb == NULL)
- goto error_dti_urb_alloc;
- usb_fill_bulk_urb(
- wa->dti_urb, wa->usb_dev,
- usb_rcvbulkpipe(wa->usb_dev, 0x80 | dti_epd->bEndpointAddress),
- wa->dti_buf, wa->dti_buf_size,
- wa_dti_cb, wa);
-
- /* init the buf in URBs */
- for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index) {
- usb_fill_bulk_urb(
- &(wa->buf_in_urbs[index]), wa->usb_dev,
- usb_rcvbulkpipe(wa->usb_dev,
- 0x80 | dti_epd->bEndpointAddress),
- NULL, 0, wa_buf_in_cb, wa);
- }
- result = usb_submit_urb(wa->dti_urb, GFP_KERNEL);
- if (result < 0) {
- dev_err(dev, "DTI Error: Could not submit DTI URB (%d) resetting\n",
- result);
- goto error_dti_urb_submit;
- }
-out:
- return 0;
-
-error_dti_urb_submit:
- usb_put_urb(wa->dti_urb);
- wa->dti_urb = NULL;
-error_dti_urb_alloc:
- return result;
-}
-EXPORT_SYMBOL_GPL(wa_dti_start);
-/*
- * Transfer complete notification
- *
- * Called from the notif.c code. We get a notification on EP2 saying
- * that some endpoint has some transfer result data available. We are
- * about to read it.
- *
- * To speed up things, we always have a URB reading the DTI URB; we
- * don't really set it up and start it until the first xfer complete
- * notification arrives, which is what we do here.
- *
- * Follow up in wa_dti_cb(), as that's where the whole state
- * machine starts.
- *
- * @wa shall be referenced
- */
-void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr)
-{
- struct device *dev = &wa->usb_iface->dev;
- struct wa_notif_xfer *notif_xfer;
- const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd;
-
- notif_xfer = container_of(notif_hdr, struct wa_notif_xfer, hdr);
- BUG_ON(notif_hdr->bNotifyType != WA_NOTIF_TRANSFER);
-
- if ((0x80 | notif_xfer->bEndpoint) != dti_epd->bEndpointAddress) {
- /* FIXME: hardcoded limitation, adapt */
- dev_err(dev, "BUG: DTI ep is %u, not %u (hack me)\n",
- notif_xfer->bEndpoint, dti_epd->bEndpointAddress);
- goto error;
- }
-
- /* attempt to start the DTI ep processing. */
- if (wa_dti_start(wa) < 0)
- goto error;
-
- return;
-
-error:
- wa_reset_all(wa);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless USB Host Controller
- * sysfs glue, wusbcore module support and life cycle management
- *
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * Creation/destruction of wusbhc is split in two parts; that that
- * doesn't require the HCD to be added (wusbhc_{create,destroy}) and
- * the one that requires (phase B, wusbhc_b_{create,destroy}).
- *
- * This is so because usb_add_hcd() will start the HC, and thus, all
- * the HC specific stuff has to be already initialized (like sysfs
- * thingies).
- */
-#include <linux/device.h>
-#include <linux/module.h>
-#include "wusbhc.h"
-
-/**
- * Extract the wusbhc that corresponds to a USB Host Controller class device
- *
- * WARNING! Apply only if @dev is that of a
- * wusbhc.usb_hcd.self->class_dev; otherwise, you loose.
- */
-static struct wusbhc *usbhc_dev_to_wusbhc(struct device *dev)
-{
- struct usb_bus *usb_bus = dev_get_drvdata(dev);
- struct usb_hcd *usb_hcd = bus_to_hcd(usb_bus);
- return usb_hcd_to_wusbhc(usb_hcd);
-}
-
-/*
- * Show & store the current WUSB trust timeout
- *
- * We don't do locking--it is an 'atomic' value.
- *
- * The units that we store/show are always MILLISECONDS. However, the
- * value of trust_timeout is jiffies.
- */
-static ssize_t wusb_trust_timeout_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%u\n", wusbhc->trust_timeout);
-}
-
-static ssize_t wusb_trust_timeout_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
- ssize_t result = -ENOSYS;
- unsigned trust_timeout;
-
- result = sscanf(buf, "%u", &trust_timeout);
- if (result != 1) {
- result = -EINVAL;
- goto out;
- }
- wusbhc->trust_timeout = min_t(unsigned, trust_timeout, 500);
- cancel_delayed_work(&wusbhc->keep_alive_timer);
- flush_workqueue(wusbd);
- queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
- msecs_to_jiffies(wusbhc->trust_timeout / 2));
-out:
- return result < 0 ? result : size;
-}
-static DEVICE_ATTR_RW(wusb_trust_timeout);
-
-/*
- * Show the current WUSB CHID.
- */
-static ssize_t wusb_chid_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
- const struct wusb_ckhdid *chid;
-
- if (wusbhc->wuie_host_info != NULL)
- chid = &wusbhc->wuie_host_info->CHID;
- else
- chid = &wusb_ckhdid_zero;
-
- return sprintf(buf, "%16ph\n", chid->data);
-}
-
-/*
- * Store a new CHID.
- *
- * - Write an all zeros CHID and it will stop the controller
- * - Write a non-zero CHID and it will start it.
- *
- * See wusbhc_chid_set() for more info.
- */
-static ssize_t wusb_chid_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
- struct wusb_ckhdid chid;
- ssize_t result;
-
- result = sscanf(buf,
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx "
- "%02hhx %02hhx %02hhx %02hhx\n",
- &chid.data[0] , &chid.data[1] ,
- &chid.data[2] , &chid.data[3] ,
- &chid.data[4] , &chid.data[5] ,
- &chid.data[6] , &chid.data[7] ,
- &chid.data[8] , &chid.data[9] ,
- &chid.data[10], &chid.data[11],
- &chid.data[12], &chid.data[13],
- &chid.data[14], &chid.data[15]);
- if (result != 16) {
- dev_err(dev, "Unrecognized CHID (need 16 8-bit hex digits): "
- "%d\n", (int)result);
- return -EINVAL;
- }
- result = wusbhc_chid_set(wusbhc, &chid);
- return result < 0 ? result : size;
-}
-static DEVICE_ATTR_RW(wusb_chid);
-
-
-static ssize_t wusb_phy_rate_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
-
- return sprintf(buf, "%d\n", wusbhc->phy_rate);
-}
-
-static ssize_t wusb_phy_rate_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
- uint8_t phy_rate;
- ssize_t result;
-
- result = sscanf(buf, "%hhu", &phy_rate);
- if (result != 1)
- return -EINVAL;
- if (phy_rate >= UWB_PHY_RATE_INVALID)
- return -EINVAL;
-
- wusbhc->phy_rate = phy_rate;
- return size;
-}
-static DEVICE_ATTR_RW(wusb_phy_rate);
-
-static ssize_t wusb_dnts_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
-
- return sprintf(buf, "num slots: %d\ninterval: %dms\n",
- wusbhc->dnts_num_slots, wusbhc->dnts_interval);
-}
-
-static ssize_t wusb_dnts_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
- uint8_t num_slots, interval;
- ssize_t result;
-
- result = sscanf(buf, "%hhu %hhu", &num_slots, &interval);
-
- if (result != 2)
- return -EINVAL;
-
- wusbhc->dnts_num_slots = num_slots;
- wusbhc->dnts_interval = interval;
-
- return size;
-}
-static DEVICE_ATTR_RW(wusb_dnts);
-
-static ssize_t wusb_retry_count_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
-
- return sprintf(buf, "%d\n", wusbhc->retry_count);
-}
-
-static ssize_t wusb_retry_count_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
- uint8_t retry_count;
- ssize_t result;
-
- result = sscanf(buf, "%hhu", &retry_count);
-
- if (result != 1)
- return -EINVAL;
-
- wusbhc->retry_count = max_t(uint8_t, retry_count,
- WUSB_RETRY_COUNT_MAX);
-
- return size;
-}
-static DEVICE_ATTR_RW(wusb_retry_count);
-
-/* Group all the WUSBHC attributes */
-static struct attribute *wusbhc_attrs[] = {
- &dev_attr_wusb_trust_timeout.attr,
- &dev_attr_wusb_chid.attr,
- &dev_attr_wusb_phy_rate.attr,
- &dev_attr_wusb_dnts.attr,
- &dev_attr_wusb_retry_count.attr,
- NULL,
-};
-
-static const struct attribute_group wusbhc_attr_group = {
- .name = NULL, /* we want them in the same directory */
- .attrs = wusbhc_attrs,
-};
-
-/*
- * Create a wusbhc instance
- *
- * NOTEs:
- *
- * - assumes *wusbhc has been zeroed and wusbhc->usb_hcd has been
- * initialized but not added.
- *
- * - fill out ports_max, mmcies_max and mmcie_{add,rm} before calling.
- *
- * - fill out wusbhc->uwb_rc and refcount it before calling
- * - fill out the wusbhc->sec_modes array
- */
-int wusbhc_create(struct wusbhc *wusbhc)
-{
- int result = 0;
-
- /* set defaults. These can be overwritten using sysfs attributes. */
- wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS;
- wusbhc->phy_rate = UWB_PHY_RATE_INVALID - 1;
- wusbhc->dnts_num_slots = 4;
- wusbhc->dnts_interval = 2;
- wusbhc->retry_count = WUSB_RETRY_COUNT_INFINITE;
-
- mutex_init(&wusbhc->mutex);
- result = wusbhc_mmcie_create(wusbhc);
- if (result < 0)
- goto error_mmcie_create;
- result = wusbhc_devconnect_create(wusbhc);
- if (result < 0)
- goto error_devconnect_create;
- result = wusbhc_rh_create(wusbhc);
- if (result < 0)
- goto error_rh_create;
- result = wusbhc_sec_create(wusbhc);
- if (result < 0)
- goto error_sec_create;
- return 0;
-
-error_sec_create:
- wusbhc_rh_destroy(wusbhc);
-error_rh_create:
- wusbhc_devconnect_destroy(wusbhc);
-error_devconnect_create:
- wusbhc_mmcie_destroy(wusbhc);
-error_mmcie_create:
- return result;
-}
-EXPORT_SYMBOL_GPL(wusbhc_create);
-
-static inline struct kobject *wusbhc_kobj(struct wusbhc *wusbhc)
-{
- return &wusbhc->usb_hcd.self.controller->kobj;
-}
-
-/*
- * Phase B of a wusbhc instance creation
- *
- * Creates fields that depend on wusbhc->usb_hcd having been
- * added. This is where we create the sysfs files in
- * /sys/class/usb_host/usb_hostX/.
- *
- * NOTE: Assumes wusbhc->usb_hcd has been already added by the upper
- * layer (hwahc or whci)
- */
-int wusbhc_b_create(struct wusbhc *wusbhc)
-{
- int result = 0;
- struct device *dev = wusbhc->usb_hcd.self.controller;
-
- result = sysfs_create_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
- if (result < 0) {
- dev_err(dev, "Cannot register WUSBHC attributes: %d\n",
- result);
- goto error_create_attr_group;
- }
-
- return 0;
-error_create_attr_group:
- return result;
-}
-EXPORT_SYMBOL_GPL(wusbhc_b_create);
-
-void wusbhc_b_destroy(struct wusbhc *wusbhc)
-{
- wusbhc_pal_unregister(wusbhc);
- sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
-}
-EXPORT_SYMBOL_GPL(wusbhc_b_destroy);
-
-void wusbhc_destroy(struct wusbhc *wusbhc)
-{
- wusbhc_sec_destroy(wusbhc);
- wusbhc_rh_destroy(wusbhc);
- wusbhc_devconnect_destroy(wusbhc);
- wusbhc_mmcie_destroy(wusbhc);
-}
-EXPORT_SYMBOL_GPL(wusbhc_destroy);
-
-struct workqueue_struct *wusbd;
-EXPORT_SYMBOL_GPL(wusbd);
-
-/*
- * WUSB Cluster ID allocation map
- *
- * Each WUSB bus in a channel is identified with a Cluster Id in the
- * unauth address pace (WUSB1.0[4.3]). We take the range 0xe0 to 0xff
- * (that's space for 31 WUSB controllers, as 0xff can't be taken). We
- * start taking from 0xff, 0xfe, 0xfd... (hence the += or -= 0xff).
- *
- * For each one we taken, we pin it in the bitap
- */
-#define CLUSTER_IDS 32
-static DECLARE_BITMAP(wusb_cluster_id_table, CLUSTER_IDS);
-static DEFINE_SPINLOCK(wusb_cluster_ids_lock);
-
-/*
- * Get a WUSB Cluster ID
- *
- * Need to release with wusb_cluster_id_put() when done w/ it.
- */
-/* FIXME: coordinate with the choose_addres() from the USB stack */
-/* we want to leave the top of the 128 range for cluster addresses and
- * the bottom for device addresses (as we map them one on one with
- * ports). */
-u8 wusb_cluster_id_get(void)
-{
- u8 id;
- spin_lock(&wusb_cluster_ids_lock);
- id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS);
- if (id >= CLUSTER_IDS) {
- id = 0;
- goto out;
- }
- set_bit(id, wusb_cluster_id_table);
- id = (u8) 0xff - id;
-out:
- spin_unlock(&wusb_cluster_ids_lock);
- return id;
-
-}
-EXPORT_SYMBOL_GPL(wusb_cluster_id_get);
-
-/*
- * Release a WUSB Cluster ID
- *
- * Obtained it with wusb_cluster_id_get()
- */
-void wusb_cluster_id_put(u8 id)
-{
- id = 0xff - id;
- BUG_ON(id >= CLUSTER_IDS);
- spin_lock(&wusb_cluster_ids_lock);
- WARN_ON(!test_bit(id, wusb_cluster_id_table));
- clear_bit(id, wusb_cluster_id_table);
- spin_unlock(&wusb_cluster_ids_lock);
-}
-EXPORT_SYMBOL_GPL(wusb_cluster_id_put);
-
-/**
- * wusbhc_giveback_urb - return an URB to the USB core
- * @wusbhc: the host controller the URB is from.
- * @urb: the URB.
- * @status: the URB's status.
- *
- * Return an URB to the USB core doing some additional WUSB specific
- * processing.
- *
- * - After a successful transfer, update the trust timeout timestamp
- * for the WUSB device.
- *
- * - [WUSB] sections 4.13 and 7.5.1 specify the stop retransmission
- * condition for the WCONNECTACK_IE is that the host has observed
- * the associated device responding to a control transfer.
- */
-void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status)
-{
- struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc,
- urb->dev);
-
- if (status == 0 && wusb_dev) {
- wusb_dev->entry_ts = jiffies;
-
- /* wusbhc_devconnect_acked() can't be called from
- atomic context so defer it to a work queue. */
- if (!list_empty(&wusb_dev->cack_node))
- queue_work(wusbd, &wusb_dev->devconnect_acked_work);
- else
- wusb_dev_put(wusb_dev);
- }
-
- usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
-}
-EXPORT_SYMBOL_GPL(wusbhc_giveback_urb);
-
-/**
- * wusbhc_reset_all - reset the HC hardware
- * @wusbhc: the host controller to reset.
- *
- * Request a full hardware reset of the chip. This will also reset
- * the radio controller and any other PALs.
- */
-void wusbhc_reset_all(struct wusbhc *wusbhc)
-{
- if (wusbhc->uwb_rc)
- uwb_rc_reset_all(wusbhc->uwb_rc);
-}
-EXPORT_SYMBOL_GPL(wusbhc_reset_all);
-
-static struct notifier_block wusb_usb_notifier = {
- .notifier_call = wusb_usb_ncb,
- .priority = INT_MAX /* Need to be called first of all */
-};
-
-static int __init wusbcore_init(void)
-{
- int result;
- result = wusb_crypto_init();
- if (result < 0)
- goto error_crypto_init;
- /* WQ is singlethread because we need to serialize notifications */
- wusbd = create_singlethread_workqueue("wusbd");
- if (wusbd == NULL) {
- result = -ENOMEM;
- printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n");
- goto error_wusbd_create;
- }
- usb_register_notify(&wusb_usb_notifier);
- bitmap_zero(wusb_cluster_id_table, CLUSTER_IDS);
- set_bit(0, wusb_cluster_id_table); /* reserve Cluster ID 0xff */
- return 0;
-
-error_wusbd_create:
- wusb_crypto_exit();
-error_crypto_init:
- return result;
-
-}
-module_init(wusbcore_init);
-
-static void __exit wusbcore_exit(void)
-{
- clear_bit(0, wusb_cluster_id_table);
- if (!bitmap_empty(wusb_cluster_id_table, CLUSTER_IDS)) {
- printk(KERN_ERR "BUG: WUSB Cluster IDs not released on exit: %*pb\n",
- CLUSTER_IDS, wusb_cluster_id_table);
- WARN_ON(1);
- }
- usb_unregister_notify(&wusb_usb_notifier);
- destroy_workqueue(wusbd);
- wusb_crypto_exit();
-}
-module_exit(wusbcore_exit);
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("Wireless USB core");
-MODULE_LICENSE("GPL");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Wireless USB Host Controller
- * Common infrastructure for WHCI and HWA WUSB-HC drivers
- *
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This driver implements parts common to all Wireless USB Host
- * Controllers (struct wusbhc, embedding a struct usb_hcd) and is used
- * by:
- *
- * - hwahc: HWA, USB-dongle that implements a Wireless USB host
- * controller, (Wireless USB 1.0 Host-Wire-Adapter specification).
- *
- * - whci: WHCI, a PCI card with a wireless host controller
- * (Wireless Host Controller Interface 1.0 specification).
- *
- * Check out the Design-overview.txt file in the source documentation
- * for other details on the implementation.
- *
- * Main blocks:
- *
- * rh Root Hub emulation (part of the HCD glue)
- *
- * devconnect Handle all the issues related to device connection,
- * authentication, disconnection, timeout, reseting,
- * keepalives, etc.
- *
- * mmc MMC IE broadcasting handling
- *
- * A host controller driver just initializes its stuff and as part of
- * that, creates a 'struct wusbhc' instance that handles all the
- * common WUSB mechanisms. Links in the function ops that are specific
- * to it and then registers the host controller. Ready to run.
- */
-
-#ifndef __WUSBHC_H__
-#define __WUSBHC_H__
-
-#include <linux/usb.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/kref.h>
-#include <linux/workqueue.h>
-#include <linux/usb/hcd.h>
-#include "../uwb/uwb.h"
-#include "include/wusb.h"
-
-/*
- * Time from a WUSB channel stop request to the last transmitted MMC.
- *
- * This needs to be > 4.096 ms in case no MMCs can be transmitted in
- * zone 0.
- */
-#define WUSB_CHANNEL_STOP_DELAY_MS 8
-#define WUSB_RETRY_COUNT_MAX 15
-#define WUSB_RETRY_COUNT_INFINITE 0
-
-/**
- * Wireless USB device
- *
- * Describe a WUSB device connected to the cluster. This struct
- * belongs to the 'struct wusb_port' it is attached to and it is
- * responsible for putting and clearing the pointer to it.
- *
- * Note this "complements" the 'struct usb_device' that the usb_hcd
- * keeps for each connected USB device. However, it extends some
- * information that is not available (there is no hcpriv ptr in it!)
- * *and* most importantly, it's life cycle is different. It is created
- * as soon as we get a DN_Connect (connect request notification) from
- * the device through the WUSB host controller; the USB stack doesn't
- * create the device until we authenticate it. FIXME: this will
- * change.
- *
- * @bos: This is allocated when the BOS descriptors are read from
- * the device and freed upon the wusb_dev struct dying.
- * @wusb_cap_descr: points into @bos, and has been verified to be size
- * safe.
- */
-struct wusb_dev {
- struct kref refcnt;
- struct wusbhc *wusbhc;
- struct list_head cack_node; /* Connect-Ack list */
- struct list_head rekey_node; /* GTK rekey list */
- u8 port_idx;
- u8 addr;
- u8 beacon_type:4;
- struct usb_encryption_descriptor ccm1_etd;
- struct wusb_ckhdid cdid;
- unsigned long entry_ts;
- struct usb_bos_descriptor *bos;
- struct usb_wireless_cap_descriptor *wusb_cap_descr;
- struct uwb_mas_bm availability;
- struct work_struct devconnect_acked_work;
- struct usb_device *usb_dev;
-};
-
-#define WUSB_DEV_ADDR_UNAUTH 0x80
-
-static inline void wusb_dev_init(struct wusb_dev *wusb_dev)
-{
- kref_init(&wusb_dev->refcnt);
- /* no need to init the cack_node */
-}
-
-extern void wusb_dev_destroy(struct kref *_wusb_dev);
-
-static inline struct wusb_dev *wusb_dev_get(struct wusb_dev *wusb_dev)
-{
- kref_get(&wusb_dev->refcnt);
- return wusb_dev;
-}
-
-static inline void wusb_dev_put(struct wusb_dev *wusb_dev)
-{
- kref_put(&wusb_dev->refcnt, wusb_dev_destroy);
-}
-
-/**
- * Wireless USB Host Controller root hub "fake" ports
- * (state and device information)
- *
- * Wireless USB is wireless, so there are no ports; but we
- * fake'em. Each RC can connect a max of devices at the same time
- * (given in the Wireless Adapter descriptor, bNumPorts or WHCI's
- * caps), referred to in wusbhc->ports_max.
- *
- * See rh.c for more information.
- *
- * The @status and @change use the same bits as in USB2.0[11.24.2.7],
- * so we don't have to do much when getting the port's status.
- *
- * WUSB1.0[7.1], USB2.0[11.24.2.7.1,fig 11-10],
- * include/linux/usb_ch9.h (#define USB_PORT_STAT_*)
- */
-struct wusb_port {
- u16 status;
- u16 change;
- struct wusb_dev *wusb_dev; /* connected device's info */
- u32 ptk_tkid;
-};
-
-/**
- * WUSB Host Controller specifics
- *
- * All fields that are common to all Wireless USB controller types
- * (HWA and WHCI) are grouped here. Host Controller
- * functions/operations that only deal with general Wireless USB HC
- * issues use this data type to refer to the host.
- *
- * @usb_hcd Instantiation of a USB host controller
- * (initialized by upper layer [HWA=HC or WHCI].
- *
- * @dev Device that implements this; initialized by the
- * upper layer (HWA-HC, WHCI...); this device should
- * have a refcount.
- *
- * @trust_timeout After this time without hearing for device
- * activity, we consider the device gone and we have to
- * re-authenticate.
- *
- * Can be accessed w/o locking--however, read to a
- * local variable then use.
- *
- * @chid WUSB Cluster Host ID: this is supposed to be a
- * unique value that doesn't change across reboots (so
- * that your devices do not require re-association).
- *
- * Read/Write protected by @mutex
- *
- * @dev_info This array has ports_max elements. It is used to
- * give the HC information about the WUSB devices (see
- * 'struct wusb_dev_info').
- *
- * For HWA we need to allocate it in heap; for WHCI it
- * needs to be permanently mapped, so we keep it for
- * both and make it easy. Call wusbhc->dev_info_set()
- * to update an entry.
- *
- * @ports_max Number of simultaneous device connections (fake
- * ports) this HC will take. Read-only.
- *
- * @port Array of port status for each fake root port. Guaranteed to
- * always be the same length during device existence
- * [this allows for some unlocked but referenced reading].
- *
- * @mmcies_max Max number of Information Elements this HC can send
- * in its MMC. Read-only.
- *
- * @start Start the WUSB channel.
- *
- * @stop Stop the WUSB channel after the specified number of
- * milliseconds. Channel Stop IEs should be transmitted
- * as required by [WUSB] 4.16.2.1.
- *
- * @mmcie_add HC specific operation (WHCI or HWA) for adding an
- * MMCIE.
- *
- * @mmcie_rm HC specific operation (WHCI or HWA) for removing an
- * MMCIE.
- *
- * @set_ptk: Set the PTK and enable encryption for a device. Or, if
- * the supplied key is NULL, disable encryption for that
- * device.
- *
- * @set_gtk: Set the GTK to be used for all future broadcast packets
- * (i.e., MMCs). With some hardware, setting the GTK may start
- * MMC transmission.
- *
- * NOTE:
- *
- * - If wusb_dev->usb_dev is not NULL, then usb_dev is valid
- * (wusb_dev has a refcount on it). Likewise, if usb_dev->wusb_dev
- * is not NULL, usb_dev->wusb_dev is valid (usb_dev keeps a
- * refcount on it).
- *
- * Most of the times when you need to use it, it will be non-NULL,
- * so there is no real need to check for it (wusb_dev will
- * disappear before usb_dev).
- *
- * - The following fields need to be filled out before calling
- * wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}.
- *
- * - there is no wusbhc_init() method, we do everything in
- * wusbhc_create().
- *
- * - Creation is done in two phases, wusbhc_create() and
- * wusbhc_create_b(); b are the parts that need to be called after
- * calling usb_hcd_add(&wusbhc->usb_hcd).
- */
-struct wusbhc {
- struct usb_hcd usb_hcd; /* HAS TO BE 1st */
- struct device *dev;
- struct uwb_rc *uwb_rc;
- struct uwb_pal pal;
-
- unsigned trust_timeout; /* in jiffies */
- struct wusb_ckhdid chid;
- uint8_t phy_rate;
- uint8_t dnts_num_slots;
- uint8_t dnts_interval;
- uint8_t retry_count;
- struct wuie_host_info *wuie_host_info;
-
- struct mutex mutex; /* locks everything else */
- u16 cluster_id; /* Wireless USB Cluster ID */
- struct wusb_port *port; /* Fake port status handling */
- struct wusb_dev_info *dev_info; /* for Set Device Info mgmt */
- u8 ports_max;
- unsigned active:1; /* currently xmit'ing MMCs */
- struct wuie_keep_alive keep_alive_ie; /* protected by mutex */
- struct delayed_work keep_alive_timer;
- struct list_head cack_list; /* Connect acknowledging */
- size_t cack_count; /* protected by 'mutex' */
- struct wuie_connect_ack cack_ie;
- struct uwb_rsv *rsv; /* cluster bandwidth reservation */
-
- struct mutex mmcie_mutex; /* MMC WUIE handling */
- struct wuie_hdr **mmcie; /* WUIE array */
- u8 mmcies_max;
- /* FIXME: make wusbhc_ops? */
- int (*start)(struct wusbhc *wusbhc);
- void (*stop)(struct wusbhc *wusbhc, int delay);
- int (*mmcie_add)(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
- u8 handle, struct wuie_hdr *wuie);
- int (*mmcie_rm)(struct wusbhc *wusbhc, u8 handle);
- int (*dev_info_set)(struct wusbhc *, struct wusb_dev *wusb_dev);
- int (*bwa_set)(struct wusbhc *wusbhc, s8 stream_index,
- const struct uwb_mas_bm *);
- int (*set_ptk)(struct wusbhc *wusbhc, u8 port_idx,
- u32 tkid, const void *key, size_t key_size);
- int (*set_gtk)(struct wusbhc *wusbhc,
- u32 tkid, const void *key, size_t key_size);
- int (*set_num_dnts)(struct wusbhc *wusbhc, u8 interval, u8 slots);
-
- struct {
- struct usb_key_descriptor descr;
- u8 data[16]; /* GTK key data */
- } __attribute__((packed)) gtk;
- u8 gtk_index;
- u32 gtk_tkid;
-
- /* workqueue for WUSB security related tasks. */
- struct workqueue_struct *wq_security;
- struct work_struct gtk_rekey_work;
-
- struct usb_encryption_descriptor *ccm1_etd;
-};
-
-#define usb_hcd_to_wusbhc(u) container_of((u), struct wusbhc, usb_hcd)
-
-
-extern int wusbhc_create(struct wusbhc *);
-extern int wusbhc_b_create(struct wusbhc *);
-extern void wusbhc_b_destroy(struct wusbhc *);
-extern void wusbhc_destroy(struct wusbhc *);
-extern int wusb_dev_sysfs_add(struct wusbhc *, struct usb_device *,
- struct wusb_dev *);
-extern void wusb_dev_sysfs_rm(struct wusb_dev *);
-extern int wusbhc_sec_create(struct wusbhc *);
-extern int wusbhc_sec_start(struct wusbhc *);
-extern void wusbhc_sec_stop(struct wusbhc *);
-extern void wusbhc_sec_destroy(struct wusbhc *);
-extern void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb,
- int status);
-void wusbhc_reset_all(struct wusbhc *wusbhc);
-
-int wusbhc_pal_register(struct wusbhc *wusbhc);
-void wusbhc_pal_unregister(struct wusbhc *wusbhc);
-
-/*
- * Return @usb_dev's @usb_hcd (properly referenced) or NULL if gone
- *
- * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr)
- *
- * This is a safe assumption as @usb_dev->bus is referenced all the
- * time during the @usb_dev life cycle.
- */
-static inline
-struct usb_hcd *usb_hcd_get_by_usb_dev(struct usb_device *usb_dev)
-{
- struct usb_hcd *usb_hcd;
- usb_hcd = bus_to_hcd(usb_dev->bus);
- return usb_get_hcd(usb_hcd);
-}
-
-/*
- * Increment the reference count on a wusbhc.
- *
- * @wusbhc's life cycle is identical to that of the underlying usb_hcd.
- */
-static inline struct wusbhc *wusbhc_get(struct wusbhc *wusbhc)
-{
- return usb_get_hcd(&wusbhc->usb_hcd) ? wusbhc : NULL;
-}
-
-/*
- * Return the wusbhc associated to a @usb_dev
- *
- * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr)
- *
- * @returns: wusbhc for @usb_dev; NULL if the @usb_dev is being torn down.
- * WARNING: referenced at the usb_hcd level, unlocked
- *
- * FIXME: move offline
- */
-static inline struct wusbhc *wusbhc_get_by_usb_dev(struct usb_device *usb_dev)
-{
- struct wusbhc *wusbhc = NULL;
- struct usb_hcd *usb_hcd;
- if (usb_dev->devnum > 1 && !usb_dev->wusb) {
- /* but root hubs */
- dev_err(&usb_dev->dev, "devnum %d wusb %d\n", usb_dev->devnum,
- usb_dev->wusb);
- BUG_ON(usb_dev->devnum > 1 && !usb_dev->wusb);
- }
- usb_hcd = usb_hcd_get_by_usb_dev(usb_dev);
- if (usb_hcd == NULL)
- return NULL;
- BUG_ON(usb_hcd->wireless == 0);
- return wusbhc = usb_hcd_to_wusbhc(usb_hcd);
-}
-
-
-static inline void wusbhc_put(struct wusbhc *wusbhc)
-{
- usb_put_hcd(&wusbhc->usb_hcd);
-}
-
-int wusbhc_start(struct wusbhc *wusbhc);
-void wusbhc_stop(struct wusbhc *wusbhc);
-extern int wusbhc_chid_set(struct wusbhc *, const struct wusb_ckhdid *);
-
-/* Device connect handling */
-extern int wusbhc_devconnect_create(struct wusbhc *);
-extern void wusbhc_devconnect_destroy(struct wusbhc *);
-extern int wusbhc_devconnect_start(struct wusbhc *wusbhc);
-extern void wusbhc_devconnect_stop(struct wusbhc *wusbhc);
-extern void wusbhc_handle_dn(struct wusbhc *, u8 srcaddr,
- struct wusb_dn_hdr *dn_hdr, size_t size);
-extern void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port);
-extern int wusb_usb_ncb(struct notifier_block *nb, unsigned long val,
- void *priv);
-extern int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
- u8 addr);
-
-/* Wireless USB fake Root Hub methods */
-extern int wusbhc_rh_create(struct wusbhc *);
-extern void wusbhc_rh_destroy(struct wusbhc *);
-
-extern int wusbhc_rh_status_data(struct usb_hcd *, char *);
-extern int wusbhc_rh_control(struct usb_hcd *, u16, u16, u16, char *, u16);
-extern int wusbhc_rh_start_port_reset(struct usb_hcd *, unsigned);
-
-/* MMC handling */
-extern int wusbhc_mmcie_create(struct wusbhc *);
-extern void wusbhc_mmcie_destroy(struct wusbhc *);
-extern int wusbhc_mmcie_set(struct wusbhc *, u8 interval, u8 repeat_cnt,
- struct wuie_hdr *);
-extern void wusbhc_mmcie_rm(struct wusbhc *, struct wuie_hdr *);
-
-/* Bandwidth reservation */
-int wusbhc_rsv_establish(struct wusbhc *wusbhc);
-void wusbhc_rsv_terminate(struct wusbhc *wusbhc);
-
-/*
- * I've always said
- * I wanted a wedding in a church...
- *
- * but lately I've been thinking about
- * the Botanical Gardens.
- *
- * We could do it by the tulips.
- * It'll be beautiful
- *
- * --Security!
- */
-extern int wusb_dev_sec_add(struct wusbhc *, struct usb_device *,
- struct wusb_dev *);
-extern void wusb_dev_sec_rm(struct wusb_dev *) ;
-extern int wusb_dev_4way_handshake(struct wusbhc *, struct wusb_dev *,
- struct wusb_ckhdid *ck);
-void wusbhc_gtk_rekey(struct wusbhc *wusbhc);
-int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev);
-
-
-/* WUSB Cluster ID handling */
-extern u8 wusb_cluster_id_get(void);
-extern void wusb_cluster_id_put(u8);
-
-/*
- * wusb_port_by_idx - return the port associated to a zero-based port index
- *
- * NOTE: valid without locking as long as wusbhc is referenced (as the
- * number of ports doesn't change). The data pointed to has to
- * be verified though :)
- */
-static inline struct wusb_port *wusb_port_by_idx(struct wusbhc *wusbhc,
- u8 port_idx)
-{
- return &wusbhc->port[port_idx];
-}
-
-/*
- * wusb_port_no_to_idx - Convert port number (per usb_dev->portnum) to
- * a port_idx.
- *
- * USB stack USB ports are 1 based!!
- *
- * NOTE: only valid for WUSB devices!!!
- */
-static inline u8 wusb_port_no_to_idx(u8 port_no)
-{
- return port_no - 1;
-}
-
-extern struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *,
- struct usb_device *);
-
-/*
- * Return a referenced wusb_dev given a @usb_dev
- *
- * Returns NULL if the usb_dev is being torn down.
- *
- * FIXME: move offline
- */
-static inline
-struct wusb_dev *wusb_dev_get_by_usb_dev(struct usb_device *usb_dev)
-{
- struct wusbhc *wusbhc;
- struct wusb_dev *wusb_dev;
- wusbhc = wusbhc_get_by_usb_dev(usb_dev);
- if (wusbhc == NULL)
- return NULL;
- mutex_lock(&wusbhc->mutex);
- wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev);
- mutex_unlock(&wusbhc->mutex);
- wusbhc_put(wusbhc);
- return wusb_dev;
-}
-
-/* Misc */
-
-extern struct workqueue_struct *wusbd;
-#endif /* #ifndef __WUSBHC_H__ */
projects / openwrt / staging / blogic.git / commitdiff