omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks,
ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks));
omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks));
- } else if (soc_is_am33xx()) {
- cpu_mask = RATE_IN_AM33XX;
- } else if (cpu_is_ti814x()) {
- cpu_mask = RATE_IN_TI814X;
} else if (cpu_is_omap34xx()) {
if (omap_rev() == OMAP3430_REV_ES1_0) {
cpu_mask = RATE_IN_3430ES1;
* Lock DPLL5 -- here only until other device init code can
* handle this
*/
- if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0))
+ if (omap_rev() >= OMAP3430_REV_ES2_0)
omap3_clk_lock_dpll5();
/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
}
-
-void ti81xx_musb_phy_power(u8 on)
-{
- void __iomem *scm_base = NULL;
- u32 usbphycfg;
-
- scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
- if (!scm_base) {
- pr_err("system control module ioremap failed\n");
- return;
- }
-
- usbphycfg = readl_relaxed(scm_base + USBCTRL0);
-
- if (on) {
- if (cpu_is_ti816x()) {
- usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
- usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
- } else if (cpu_is_ti814x()) {
- usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN
- | USBPHY_DPINPUT | USBPHY_DMINPUT);
- usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN
- | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL);
- }
- } else {
- if (cpu_is_ti816x())
- usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
- else if (cpu_is_ti814x())
- usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
-
- }
- writel_relaxed(usbphycfg, scm_base + USBCTRL0);
-
- iounmap(scm_base);
-}
musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus;
- if (soc_is_am35xx()) {
- oh_name = "am35x_otg_hs";
- name = "musb-am35x";
- } else if (cpu_is_ti81xx()) {
- oh_name = "usb_otg_hs";
- name = "musb-ti81xx";
- } else {
- oh_name = "usb_otg_hs";
- name = "musb-omap2430";
- }
+ oh_name = "usb_otg_hs";
+ name = "musb-omap2430";
oh = omap_hwmod_lookup(oh_name);
if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
extern void am35x_musb_phy_power(u8 on);
extern void am35x_musb_clear_irq(void);
extern void am35x_set_mode(u8 musb_mode);
-extern void ti81xx_musb_phy_power(u8 on);
-