--- /dev/null
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_CNS3XXX=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_MULTI_V6_V7=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_ARCH_NR_GPIO=0
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_ARCH_WM8750 is not set
+CONFIG_ARM=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+CONFIG_ATA=y
+CONFIG_ATAGS=y
+# CONFIG_ATA_SFF is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CNS3XXX_ETH=y
+CONFIG_COMMON_CLK=y
+# CONFIG_COMMON_CLK_PXA is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_ABRT_EV6=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_V6K=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_UART_8250 is not set
+# CONFIG_DEBUG_UART_BCM63XX is not set
+# CONFIG_DEBUG_UART_PL01X is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DMA_CACHE_FIQ_BROADCAST=y
+CONFIG_DTC=y
+CONFIG_EEPROM_AT24=y
+CONFIG_FIQ=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_SCU=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HWMON=y
+CONFIG_HW_RANDOM=m
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_CNS3XXX=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_INTEL_SOC_PMIC is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_KERNFS=y
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_TRIGGER_NETDEV is not set
+CONFIG_LIBFDT=y
+# CONFIG_MACH_CNS3420VB is not set
+CONFIG_MACH_GW2388=y
+CONFIG_MDIO_BOARDINFO=y
+# CONFIG_MFD_AXP20X is not set
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_CNS3XXX=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_VENDOR_CAVIUM=y
+CONFIG_NLS=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_CPUS=2
+CONFIG_NTP_PPS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PHY_SAMSUNG_USB2 is not set
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_PL310_ERRATA_727915=y
+CONFIG_PL310_ERRATA_753970=y
+CONFIG_PL310_ERRATA_769419=y
+CONFIG_PPS=y
+CONFIG_PPS_CLIENT_GPIO=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PROC_STRIPPED is not set
+CONFIG_RAID_ATTRS=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1672=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SCHED_HRTICK=y
+CONFIG_SCSI=y
+CONFIG_SENSORS_AD7418=y
+CONFIG_SENSORS_GSC=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_CNS3XXX=y
+CONFIG_SPI_MASTER=y
+# CONFIG_STAGING is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_SWIOTLB=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TREE_RCU=y
+CONFIG_UID16=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_CNS3XXX_EHCI=y
+CONFIG_USB_CNS3XXX_OHCI=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWC2=y
+# CONFIG_USB_DWC2_DEBUG is not set
+CONFIG_USB_DWC2_HOST=y
+# CONFIG_USB_DWC2_PCI is not set
+# CONFIG_USB_DWC2_PERIPHERAL is not set
+CONFIG_USB_DWC2_PLATFORM=y
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_PCI=y
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_XILINX is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFP=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -1,3 +1,5 @@
++ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
++
+ obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o
+ cns3xxx-y += core.o pm.o
+ cns3xxx-$(CONFIG_ATAGS) += devices.o
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -339,7 +339,7 @@ static struct usb_ohci_pdata cns3xxx_usb
+ .power_off = csn3xxx_usb_power_off,
+ };
+
+-static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
++static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
+ { "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
+ { "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
+ { "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
--- /dev/null
+--- a/arch/arm/include/asm/glue-cache.h
++++ b/arch/arm/include/asm/glue-cache.h
+@@ -156,11 +156,19 @@ static inline void nop_dma_unmap_area(co
+ #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
+ #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
+ #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
+ #define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
+
+ #define dmac_map_area __glue(_CACHE,_dma_map_area)
+ #define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
+ #define dmac_flush_range __glue(_CACHE,_dma_flush_range)
++#else
++#define __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area)
++
++#define dmac_map_area __glue(fiq,_dma_map_area)
++#define dmac_unmap_area __glue(fiq,_dma_unmap_area)
++#define dmac_flush_range __glue(fiq,_dma_flush_range)
++#endif /* CONFIG_DMA_CACHE_FIQ_BROADCAST */
+ #endif
+
+ #endif
+--- a/arch/arm/mm/Kconfig
++++ b/arch/arm/mm/Kconfig
+@@ -844,6 +844,17 @@ config DMA_CACHE_RWFO
+ in hardware, other workarounds are needed (e.g. cache
+ maintenance broadcasting in software via FIQ).
+
++config DMA_CACHE_FIQ_BROADCAST
++ bool "Enable fiq broadcast DMA cache maintenance"
++ depends on CPU_V6K && SMP
++ select FIQ
++ help
++ The Snoop Control Unit on ARM11MPCore does not detect the
++ cache maintenance operations and the dma_{map,unmap}_area()
++ functions may leave stale cache entries on other CPUs. By
++ enabling this option, fiq broadcast in the ARMv6
++ DMA cache maintenance functions is performed.
++
+ config OUTER_CACHE
+ bool
+
+--- a/arch/arm/mm/flush.c
++++ b/arch/arm/mm/flush.c
+@@ -304,6 +304,7 @@ void __sync_icache_dcache(pte_t pteval)
+ void flush_dcache_page(struct page *page)
+ {
+ struct address_space *mapping;
++ bool skip_broadcast = true;
+
+ /*
+ * The zero page is never written to, so never has any dirty
+@@ -314,7 +315,10 @@ void flush_dcache_page(struct page *page
+
+ mapping = page_mapping(page);
+
+- if (!cache_ops_need_broadcast() &&
++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
++ skip_broadcast = !cache_ops_need_broadcast();
++#endif
++ if (skip_broadcast &&
+ mapping && !page_mapped(page))
+ clear_bit(PG_dcache_clean, &page->flags);
+ else {
--- /dev/null
+1. Made the connection between CNS3xxx SOCs(ARCH_CNS3xxx) and MPcore watchdog
+ since the CNS3xxx SOCs have ARM11 MPcore CPU.
+2. Enable mpcore_watchdog option as module to default configuration at
+ arch/arm/configs/cns3420vb_defconfig.
+
+Signed-off-by: Tommy Lin <tommy.lin@caviumnetworks.com>
+
+---
+arch/arm/Kconfig | 1 +
+ arch/arm/configs/cns3420vb_defconfig | 2 ++
+ arch/arm/mach-cns3xxx/cns3420vb.c | 22 ++++++++++++++++++++++
+ 3 files changed, 25 insertions(+), 0 deletions(-)
+
+--- a/arch/arm/configs/cns3420vb_defconfig
++++ b/arch/arm/configs/cns3420vb_defconfig
+@@ -56,6 +56,8 @@ CONFIG_LEGACY_PTY_COUNT=16
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_HWMON is not set
+ # CONFIG_VGA_CONSOLE is not set
++CONFIG_WATCHDOG=y
++CONFIG_MPCORE_WATCHDOG=m
+ # CONFIG_HID_SUPPORT is not set
+ # CONFIG_USB_SUPPORT is not set
+ CONFIG_MMC=y
+--- a/arch/arm/mach-cns3xxx/cns3420vb.c
++++ b/arch/arm/mach-cns3xxx/cns3420vb.c
+@@ -206,10 +206,32 @@ static struct platform_device cns3xxx_us
+ },
+ };
+
++/* Watchdog */
++static struct resource cns3xxx_watchdog_resources[] = {
++ [0] = {
++ .start = CNS3XXX_TC11MP_TWD_BASE,
++ .end = CNS3XXX_TC11MP_TWD_BASE + PAGE_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = IRQ_LOCALWDOG,
++ .end = IRQ_LOCALWDOG,
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++static struct platform_device cns3xxx_watchdog_device = {
++ .name = "mpcore_wdt",
++ .id = -1,
++ .num_resources = ARRAY_SIZE(cns3xxx_watchdog_resources),
++ .resource = cns3xxx_watchdog_resources,
++};
++
+ /*
+ * Initialization
+ */
+ static struct platform_device *cns3420_pdevs[] __initdata = {
++ &cns3xxx_watchdog_device,
+ &cns3420_nor_pdev,
+ &cns3xxx_usb_ehci_device,
+ &cns3xxx_usb_ohci_device,
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -5,3 +5,5 @@ cns3xxx-y += core.o pm.o
+ cns3xxx-$(CONFIG_ATAGS) += devices.o
+ cns3xxx-$(CONFIG_PCI) += pcie.o
+ cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
++cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o
++cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+--- a/arch/arm/mach-cns3xxx/Kconfig
++++ b/arch/arm/mach-cns3xxx/Kconfig
+@@ -2,6 +2,9 @@ menuconfig ARCH_CNS3XXX
+ bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
+ select ARM_GIC
+ select PCI_DOMAINS if PCI
++ select HAVE_ARM_SCU if SMP
++ select HAVE_ARM_TWD if LOCAL_TIMERS
++ select HAVE_SMP
+ help
+ Support for Cavium Networks CNS3XXX platform.
+
+--- a/arch/arm/mach-cns3xxx/core.h
++++ b/arch/arm/mach-cns3xxx/core.h
+@@ -13,6 +13,7 @@
+
+ #include <linux/reboot.h>
+
++extern struct smp_operations cns3xxx_smp_ops;
+ extern void cns3xxx_timer_init(void);
+
+ #ifdef CONFIG_CACHE_L2X0
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -331,8 +331,6 @@ void __init cns3xxx_pcie_init_late(void)
+ "imprecise external abort");
+
+ for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
+- cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
+- cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
+ cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
+ cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
+ pci_common_init(&cns3xxx_pcie[i].hw_pci);
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/laguna.c
++++ b/arch/arm/mach-cns3xxx/laguna.c
+@@ -849,7 +849,6 @@ static struct map_desc laguna_io_desc[]
+ static void __init laguna_map_io(void)
+ {
+ cns3xxx_map_io();
+- cns3xxx_pcie_iotable_init();
+ iotable_init(ARRAY_AND_SIZE(laguna_io_desc));
+ laguna_early_serial_setup();
+ }
+@@ -873,15 +872,6 @@ static int laguna_register_gpio(struct g
+ return ret;
+ }
+
+-static int __init laguna_pcie_init(void)
+-{
+- if (!machine_is_gw2388())
+- return 0;
+-
+- return cns3xxx_pcie_init();
+-}
+-subsys_initcall(laguna_pcie_init);
+-
+ static int __init laguna_model_setup(void)
+ {
+ u32 __iomem *mem;
+@@ -1075,5 +1065,6 @@ MACHINE_START(GW2388, "Gateworks Corpora
+ .init_irq = cns3xxx_init_irq,
+ .init_time = cns3xxx_timer_init,
+ .init_machine = laguna_init,
++ .init_late = cns3xxx_pcie_init_late,
+ .restart = cns3xxx_restart,
+ MACHINE_END
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/Kconfig
++++ b/arch/arm/mach-cns3xxx/Kconfig
+@@ -5,6 +5,7 @@ menuconfig ARCH_CNS3XXX
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if LOCAL_TIMERS
+ select HAVE_SMP
++ select FIQ
+ help
+ Support for Cavium Networks CNS3XXX platform.
+
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -5,5 +5,5 @@ cns3xxx-y += core.o pm.o
+ cns3xxx-$(CONFIG_ATAGS) += devices.o
+ cns3xxx-$(CONFIG_PCI) += pcie.o
+ cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
+-cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o
++cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o
+ cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+--- a/arch/arm/mach-cns3xxx/cns3xxx.h
++++ b/arch/arm/mach-cns3xxx/cns3xxx.h
+@@ -267,6 +267,7 @@
+ #define MISC_PCIE_INT_MASK(x) MISC_MEM_MAP(0x978 + (x) * 0x100)
+ #define MISC_PCIE_INT_STATUS(x) MISC_MEM_MAP(0x97C + (x) * 0x100)
+
++#define MISC_FIQ_CPU(x) MISC_MEM_MAP(0xA58 - (x) * 0x4)
+ /*
+ * Power management and clock control
+ */
+--- a/arch/arm/mm/Kconfig
++++ b/arch/arm/mm/Kconfig
+@@ -827,7 +827,7 @@ config KUSER_HELPERS
+
+ config DMA_CACHE_RWFO
+ bool "Enable read/write for ownership DMA cache maintenance"
+- depends on CPU_V6K && SMP
++ depends on CPU_V6K && SMP && !ARCH_CNS3XXX
+ default y
+ help
+ The Snoop Control Unit on ARM11MPCore does not detect the
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -17,6 +17,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/usb/ehci_pdriver.h>
+ #include <linux/usb/ohci_pdriver.h>
++#include <asm/smp_twd.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+ #include <asm/mach/time.h>
+@@ -26,6 +27,8 @@
+ #include "core.h"
+ #include "pm.h"
+
++#define IRQ_LOCALTIMER 29
++
+ static struct map_desc cns3xxx_io_desc[] __initdata = {
+ {
+ .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT,
+@@ -191,6 +194,17 @@ static struct irqaction cns3xxx_timer_ir
+ .handler = cns3xxx_timer_interrupt,
+ };
+
++static void __init cns3xxx_init_twd(void)
++{
++#ifdef CONFIG_LOCAL_TIMERS
++ static DEFINE_TWD_LOCAL_TIMER(cns3xx_twd_local_timer,
++ CNS3XXX_TC11MP_TWD_BASE,
++ IRQ_LOCALTIMER);
++
++ twd_local_timer_register(&cns3xx_twd_local_timer);
++#endif
++}
++
+ /*
+ * Set up the clock source and clock events devices
+ */
+@@ -244,6 +258,7 @@ static void __init __cns3xxx_timer_init(
+ setup_irq(timer_irq, &cns3xxx_timer_irq);
+
+ cns3xxx_clockevents_init(timer_irq);
++ cns3xxx_init_twd();
+ }
+
+ void __init cns3xxx_timer_init(void)
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -81,6 +81,16 @@ static struct map_desc cns3xxx_io_desc[]
+ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
++ }, {
++ .virtual = CNS3XXX_PCIE0_IO_BASE_VIRT,
++ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_IO_BASE),
++ .length = SZ_16M,
++ .type = MT_DEVICE,
++ }, {
++ .virtual = CNS3XXX_PCIE1_IO_BASE_VIRT,
++ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_IO_BASE),
++ .length = SZ_16M,
++ .type = MT_DEVICE,
+ #endif
+ },
+ };
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -88,6 +88,79 @@ static void __iomem *cns3xxx_pci_cfg_bas
+ return base + (where & 0xffc) + (devfn << 12);
+ }
+
++static inline int check_master_abort(struct pci_bus *bus, unsigned int devfn, int where)
++{
++ struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
++
++ /* check PCI-compatible status register after access */
++ if (cnspci->linked) {
++ void __iomem *host_base;
++ u32 sreg, ereg;
++
++ host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual;
++ sreg = __raw_readw(host_base + 0x6) & 0xF900;
++ ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg
++
++ if (sreg | ereg) {
++ /* SREG:
++ * BIT15 - Detected Parity Error
++ * BIT14 - Signaled System Error
++ * BIT13 - Received Master Abort
++ * BIT12 - Received Target Abort
++ * BIT11 - Signaled Target Abort
++ * BIT08 - Master Data Parity Error
++ *
++ * EREG:
++ * BIT20 - Unsupported Request
++ * BIT19 - ECRC
++ * BIT18 - Malformed TLP
++ * BIT17 - Receiver Overflow
++ * BIT16 - Unexpected Completion
++ * BIT15 - Completer Abort
++ * BIT14 - Completion Timeout
++ * BIT13 - Flow Control Protocol Error
++ * BIT12 - Poisoned TLP
++ * BIT04 - Data Link Protocol Error
++ *
++ * TODO: see Documentation/pci-error-recovery.txt
++ * implement error_detected handler
++ */
++/*
++ printk("pci error: %04d:%02x:%02x.%02x sreg=0x%04x ereg=0x%08x", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), sreg, ereg);
++ if (sreg & BIT(15)) printk(" <PERR");
++ if (sreg & BIT(14)) printk(" >SERR");
++ if (sreg & BIT(13)) printk(" <MABRT");
++ if (sreg & BIT(12)) printk(" <TABRT");
++ if (sreg & BIT(11)) printk(" >TABRT");
++ if (sreg & BIT( 8)) printk(" MPERR");
++
++ if (ereg & BIT(20)) printk(" Unsup");
++ if (ereg & BIT(19)) printk(" ECRC");
++ if (ereg & BIT(18)) printk(" MTLP");
++ if (ereg & BIT(17)) printk(" OFLOW");
++ if (ereg & BIT(16)) printk(" Unex");
++ if (ereg & BIT(15)) printk(" ABRT");
++ if (ereg & BIT(14)) printk(" COMPTO");
++ if (ereg & BIT(13)) printk(" FLOW");
++ if (ereg & BIT(12)) printk(" PTLP");
++ if (ereg & BIT( 4)) printk(" DLINK");
++ printk("\n");
++*/
++ pr_debug("%s failed port%d sreg=0x%04x\n", __func__,
++ cnspci->hw_pci.domain, sreg);
++
++ /* make sure the status bits are reset */
++ __raw_writew(sreg, host_base + 6);
++ __raw_writel(ereg, host_base + 0x104);
++ return 1;
++ }
++ }
++ else
++ return 1;
++
++ return 0;
++}
++
+ static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+ {
+@@ -104,6 +177,11 @@ static int cns3xxx_pci_read_config(struc
+
+ v = __raw_readl(base);
+
++ if (check_master_abort(bus, devfn, where)) {
++ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)= master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
++ return PCIBIOS_DEVICE_NOT_FOUND;
++ }
++
+ if (bus->number == 0 && devfn == 0 &&
+ (where & 0xffc) == PCI_CLASS_REVISION) {
+ /*
+@@ -133,11 +211,19 @@ static int cns3xxx_pci_write_config(stru
+ return PCIBIOS_SUCCESSFUL;
+
+ v = __raw_readl(base);
++ if (check_master_abort(bus, devfn, where)) {
++ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)=0x%08x master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
++ return PCIBIOS_DEVICE_NOT_FOUND;
++ }
+
+ v &= ~(mask << shift);
+ v |= (val & mask) << shift;
+
+ __raw_writel(v, base);
++ if (check_master_abort(bus, devfn, where)) {
++ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)=0x%08x master_abort on write\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
++ return PCIBIOS_DEVICE_NOT_FOUND;
++ }
+
+ return PCIBIOS_SUCCESSFUL;
+ }
+@@ -315,8 +401,14 @@ static void __init cns3xxx_pcie_hw_init(
+ static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+ {
++#if 0
++/* R14_ABORT = PC+4 for XSCALE but not ARM11MPCORE
++ * ignore imprecise aborts and use PCI-compatible Status register to
++ * determine errors instead
++ */
+ if (fsr & (1 << 10))
+ regs->ARM_pc += 4;
++#endif
+ return 0;
+ }
+
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -424,6 +424,8 @@ void __init cns3xxx_pcie_init_late(void)
+
+ for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
+ cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
++ if (!cns3xxx_pcie[i].linked)
++ continue;
+ cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
+ pci_common_init(&cns3xxx_pcie[i].hw_pci);
+ }
--- /dev/null
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -416,6 +416,18 @@ config I2C_CBUS_GPIO
+ This driver can also be built as a module. If so, the module
+ will be called i2c-cbus-gpio.
+
++config I2C_CNS3XXX
++ tristate "Cavium CNS3xxx I2C driver"
++ depends on ARCH_CNS3XXX
++ help
++ Support for Cavium CNS3xxx I2C controller driver.
++
++ This driver can also be built as a module. If so, the module
++ will be called i2c-cns3xxx.
++
++ Please note that this driver might be needed to bring up other
++ devices such as Cavium CNS3xxx Ethernet.
++
+ config I2C_CPM
+ tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
+ depends on CPM1 || CPM2
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -101,6 +101,7 @@ obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-
+ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
+ obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
+ obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
++obj-$(CONFIG_I2C_CNS3XXX) += i2c-cns3xxx.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+
+ ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
--- /dev/null
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -171,6 +171,13 @@ config SPI_CLPS711X
+ This enables dedicated general purpose SPI/Microwire1-compatible
+ master mode interface (SSI1) for CLPS711X-based CPUs.
+
++config SPI_CNS3XXX
++ tristate "CNS3XXX SPI controller"
++ depends on ARCH_CNS3XXX && SPI_MASTER
++ select SPI_BITBANG
++ help
++ This enables using the CNS3XXX SPI controller in master mode.
++
+ config SPI_COLDFIRE_QSPI
+ tristate "Freescale Coldfire QSPI controller"
+ depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -25,6 +25,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi-bitban
+ obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
+ obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o
+ obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o
++obj-$(CONFIG_SPI_CNS3XXX) += spi-cns3xxx.o
+ obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o
+ obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o
+ obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o
+--- a/drivers/spi/spi-bitbang.c
++++ b/drivers/spi/spi-bitbang.c
+@@ -332,6 +332,10 @@ static int spi_bitbang_transfer_one(stru
+ */
+ if (!m->is_dma_mapped)
+ t->rx_dma = t->tx_dma = 0;
++
++ t->last_in_message_list =
++ list_is_last(&t->transfer_list, &m->transfers);
++
+ status = bitbang->txrx_bufs(spi, t);
+ }
+ if (status > 0)
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -628,6 +628,13 @@ struct spi_transfer {
+ u32 speed_hz;
+
+ struct list_head transfer_list;
++
++#ifdef CONFIG_ARCH_CNS3XXX
++ unsigned last_in_message_list;
++#ifdef CONFIG_SPI_CNS3XXX_2IOREAD
++ u8 dio_read;
++#endif
++#endif
+ };
+
+ /**
--- /dev/null
+--- a/drivers/ata/ahci_platform.c
++++ b/drivers/ata/ahci_platform.c
+@@ -29,12 +29,23 @@ static const struct ata_port_info ahci_p
+ .port_ops = &ahci_platform_ops,
+ };
+
++static const struct ata_port_info cns3xxx_port_info = {
++ .flags = AHCI_FLAG_COMMON,
++ .pio_mask = ATA_PIO4,
++ .udma_mask = ATA_UDMA6,
++ .port_ops = &ahci_pmp_retry_srst_ops,
++};
++
+ static int ahci_probe(struct platform_device *pdev)
+ {
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
++ const struct ata_port_info *info = &ahci_port_info;
+ int rc;
+
++ if (IS_ENABLED(CONFIG_ARCH_CNS3XXX))
++ info = &cns3xxx_port_info;
++
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
--- /dev/null
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -34,6 +34,7 @@ source "drivers/net/ethernet/adi/Kconfig
+ source "drivers/net/ethernet/broadcom/Kconfig"
+ source "drivers/net/ethernet/brocade/Kconfig"
+ source "drivers/net/ethernet/calxeda/Kconfig"
++source "drivers/net/ethernet/cavium/Kconfig"
+ source "drivers/net/ethernet/chelsio/Kconfig"
+ source "drivers/net/ethernet/cirrus/Kconfig"
+ source "drivers/net/ethernet/cisco/Kconfig"
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -20,6 +20,7 @@ obj-$(CONFIG_NET_BFIN) += adi/
+ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
+ obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
+ obj-$(CONFIG_NET_CALXEDA_XGMAC) += calxeda/
++obj-$(CONFIG_NET_VENDOR_CAVIUM) += cavium/
+ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+ obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
+ obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -135,12 +135,13 @@ static void cns3xxx_timer_set_mode(enum
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+- reload = pclk * 20 / (3 * HZ) * 0x25000;
++ reload = pclk * 1000000 / HZ;
+ writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+ ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* period set, and timer enabled in 'next_event' hook */
++ writel(0, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+ ctrl |= (1 << 2) | (1 << 9);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+@@ -168,7 +169,7 @@ static struct clock_event_device cns3xxx
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = cns3xxx_timer_set_mode,
+ .set_next_event = cns3xxx_timer_set_next_event,
+- .rating = 350,
++ .rating = 300,
+ .cpumask = cpu_all_mask,
+ };
+
+@@ -215,6 +216,35 @@ static void __init cns3xxx_init_twd(void
+ #endif
+ }
+
++static cycle_t cns3xxx_get_cycles(struct clocksource *cs)
++{
++ u64 val;
++
++ val = readl(cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
++ val &= 0xffff;
++
++ return ((val << 32) | readl(cns3xxx_tmr1 + TIMER_FREERUN_OFFSET));
++}
++
++static struct clocksource clocksource_cns3xxx = {
++ .name = "freerun",
++ .rating = 200,
++ .read = cns3xxx_get_cycles,
++ .mask = CLOCKSOURCE_MASK(48),
++ .shift = 16,
++ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
++};
++
++static void __init cns3xxx_clocksource_init(void)
++{
++ /* Reset the FreeRunning counter */
++ writel((1 << 16), cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
++
++ clocksource_cns3xxx.mult =
++ clocksource_khz2mult(100, clocksource_cns3xxx.shift);
++ clocksource_register(&clocksource_cns3xxx);
++}
++
+ /*
+ * Set up the clock source and clock events devices
+ */
+@@ -232,13 +262,12 @@ static void __init __cns3xxx_timer_init(
+ /* stop free running timer3 */
+ writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
+
+- /* timer1 */
+- writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
+- writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+-
+ writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
+ writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
+
++ val = (cns3xxx_cpu_clock() >> 3) * 1000000 / HZ;
++ writel(val, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
++
+ /* mask irq, non-mask timer1 overflow */
+ irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+ irq_mask &= ~(1 << 2);
+@@ -250,23 +279,9 @@ static void __init __cns3xxx_timer_init(
+ val |= (1 << 9);
+ writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+- /* timer2 */
+- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
+- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
+-
+- /* mask irq */
+- irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+- irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
+- writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+-
+- /* down counter */
+- val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+- val |= (1 << 10);
+- writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+-
+- /* Make irqs happen for the system timer */
+ setup_irq(timer_irq, &cns3xxx_timer_irq);
+
++ cns3xxx_clocksource_init();
+ cns3xxx_clockevents_init(timer_irq);
+ cns3xxx_init_twd();
+ }
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/cns3420vb.c
++++ b/arch/arm/mach-cns3xxx/cns3420vb.c
+@@ -245,6 +245,10 @@ static void __init cns3420_init(void)
+
+ cns3xxx_ahci_init();
+ cns3xxx_sdhci_init();
++ cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA,
++ NR_IRQS_CNS3XXX);
++ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB,
++ NR_IRQS_CNS3XXX + 32);
+
+ pm_power_off = cns3xxx_power_off;
+ }
+--- a/arch/arm/mach-cns3xxx/Kconfig
++++ b/arch/arm/mach-cns3xxx/Kconfig
+@@ -1,6 +1,8 @@
+ menuconfig ARCH_CNS3XXX
+ bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
+ select ARM_GIC
++ select ARCH_REQUIRE_GPIOLIB
++ select GENERIC_IRQ_CHIP
+ select PCI_DOMAINS if PCI
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if LOCAL_TIMERS
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -1,7 +1,7 @@
+ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
+ obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o
+-cns3xxx-y += core.o pm.o
++cns3xxx-y += core.o pm.o gpio.o
+ cns3xxx-$(CONFIG_ATAGS) += devices.o
+ cns3xxx-$(CONFIG_PCI) += pcie.o
+ cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
+--- a/arch/arm/mach-cns3xxx/cns3xxx.h
++++ b/arch/arm/mach-cns3xxx/cns3xxx.h
+@@ -68,8 +68,10 @@
+ #define SMC_PCELL_ID_3_OFFSET 0xFFC
+
+ #define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */
++#define CNS3XXX_GPIOA_BASE_VIRT 0xFB006000
+
+ #define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */
++#define CNS3XXX_GPIOB_BASE_VIRT 0xFB007000
+
+ #define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */
+
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -50,6 +50,16 @@ static struct map_desc cns3xxx_io_desc[]
+ .pfn = __phys_to_pfn(CNS3XXX_PM_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
++ }, {
++ .virtual = CNS3XXX_GPIOA_BASE_VIRT,
++ .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE),
++ .length = SZ_4K,
++ .type = MT_DEVICE,
++ }, {
++ .virtual = CNS3XXX_GPIOB_BASE_VIRT,
++ .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE),
++ .length = SZ_4K,
++ .type = MT_DEVICE,
+ #ifdef CONFIG_PCI
+ }, {
+ .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/core.c
++++ b/arch/arm/mach-cns3xxx/core.c
+@@ -305,13 +305,26 @@ void __init cns3xxx_timer_init(void)
+
+ #ifdef CONFIG_CACHE_L2X0
+
+-void __init cns3xxx_l2x0_init(void)
++static int cns3xxx_l2x0_enable = 1;
++
++static int __init cns3xxx_l2x0_disable(char *s)
++{
++ cns3xxx_l2x0_enable = 0;
++ return 1;
++}
++__setup("nol2x0", cns3xxx_l2x0_disable);
++
++static int __init cns3xxx_l2x0_init(void)
+ {
+- void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
++ void __iomem *base;
+ u32 val;
+
++ if (!cns3xxx_l2x0_enable)
++ return 0;
++
++ base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
+ if (WARN_ON(!base))
+- return;
++ return 0;
+
+ /*
+ * Tag RAM Control register
+@@ -341,7 +354,10 @@ void __init cns3xxx_l2x0_init(void)
+
+ /* 32 KiB, 8-way, parity disable */
+ l2x0_init(base, 0x00500000, 0xfe0f0fff);
++
++ return 0;
+ }
++arch_initcall(cns3xxx_l2x0_init);
+
+ #endif /* CONFIG_CACHE_L2X0 */
+
+--- a/arch/arm/mach-cns3xxx/cns3420vb.c
++++ b/arch/arm/mach-cns3xxx/cns3420vb.c
+@@ -239,8 +239,6 @@ static struct platform_device *cns3420_p
+
+ static void __init cns3420_init(void)
+ {
+- cns3xxx_l2x0_init();
+-
+ platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
+
+ cns3xxx_ahci_init();
+--- a/arch/arm/mach-cns3xxx/core.h
++++ b/arch/arm/mach-cns3xxx/core.h
+@@ -16,12 +16,6 @@
+ extern struct smp_operations cns3xxx_smp_ops;
+ extern void cns3xxx_timer_init(void);
+
+-#ifdef CONFIG_CACHE_L2X0
+-void __init cns3xxx_l2x0_init(void);
+-#else
+-static inline void cns3xxx_l2x0_init(void) {}
+-#endif /* CONFIG_CACHE_L2X0 */
+-
+ #ifdef CONFIG_PCI
+ extern void __init cns3xxx_pcie_init_late(void);
+ #else
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/Kconfig
++++ b/arch/arm/mach-cns3xxx/Kconfig
+@@ -22,4 +22,12 @@ config MACH_CNS3420VB
+ This is a platform with an on-board ARM11 MPCore and has support
+ for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
+
++config MACH_GW2388
++ bool "Support for Gateworks Laguna Platform"
++ help
++ Include support for the Gateworks Laguna Platform
++
++ This is a platform with an on-board ARM11 MPCore and has support
++ for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, I2C, GIG, etc.
++
+ endif
+--- a/arch/arm/mach-cns3xxx/Makefile
++++ b/arch/arm/mach-cns3xxx/Makefile
+@@ -7,3 +7,5 @@ cns3xxx-$(CONFIG_PCI) += pcie.o
+ cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
+ cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o
+ cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o
++cns3xxx-$(CONFIG_MACH_GW2388) += laguna.o
++
+--- a/arch/arm/mach-cns3xxx/devices.c
++++ b/arch/arm/mach-cns3xxx/devices.c
+@@ -16,6 +16,7 @@
+ #include <linux/compiler.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
++#include <asm/mach-types.h>
+ #include "cns3xxx.h"
+ #include "pm.h"
+ #include "core.h"
+@@ -101,7 +102,11 @@ void __init cns3xxx_sdhci_init(void)
+ u32 gpioa_pins = __raw_readl(gpioa);
+
+ /* MMC/SD pins share with GPIOA */
+- gpioa_pins |= 0x1fff0004;
++ if (machine_is_gw2388()) {
++ gpioa_pins |= 0x1fff0000;
++ } else {
++ gpioa_pins |= 0x1fff0004;
++ }
+ __raw_writel(gpioa_pins, gpioa);
+
+ cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
--- /dev/null
+--- a/drivers/mmc/host/sdhci-cns3xxx.c
++++ b/drivers/mmc/host/sdhci-cns3xxx.c
+@@ -88,9 +88,9 @@ static const struct sdhci_pltfm_data sdh
+ .ops = &sdhci_cns3xxx_ops,
+ .quirks = SDHCI_QUIRK_BROKEN_DMA |
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+- SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
++ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
++ SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+ };
+
+ static int sdhci_cns3xxx_probe(struct platform_device *pdev)
--- /dev/null
+--- a/arch/arm/mach-cns3xxx/laguna.c
++++ b/arch/arm/mach-cns3xxx/laguna.c
+@@ -21,6 +21,7 @@
+ #include <linux/kernel.h>
+ #include <linux/compiler.h>
+ #include <linux/io.h>
++#include <linux/irq.h>
+ #include <linux/gpio.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/serial_core.h>
+@@ -872,6 +873,47 @@ static int laguna_register_gpio(struct g
+ return ret;
+ }
+
++/* allow disabling of external isolated PCIe IRQs */
++static int cns3xxx_pciextirq = 1;
++static int __init cns3xxx_pciextirq_disable(char *s)
++{
++ cns3xxx_pciextirq = 0;
++ return 1;
++}
++__setup("noextirq", cns3xxx_pciextirq_disable);
++
++static int __init laguna_pcie_init_irq(void)
++{
++ u32 __iomem *mem = (void __iomem *)(CNS3XXX_GPIOB_BASE_VIRT + 0x0004);
++ u32 reg = (__raw_readl(mem) >> 26) & 0xf;
++ int irqs[] = {
++ IRQ_CNS3XXX_EXTERNAL_PIN0,
++ IRQ_CNS3XXX_EXTERNAL_PIN1,
++ IRQ_CNS3XXX_EXTERNAL_PIN2,
++ 154,
++ };
++
++ if (!machine_is_gw2388())
++ return 0;
++
++ /* Verify GPIOB[26:29] == 0001b indicating support for ext irqs */
++ if (cns3xxx_pciextirq && reg != 1)
++ cns3xxx_pciextirq = 0;
++
++ if (cns3xxx_pciextirq) {
++ printk("laguna: using isolated PCI interrupts:"
++ " irq%d/irq%d/irq%d/irq%d\n",
++ irqs[0], irqs[1], irqs[2], irqs[3]);
++ cns3xxx_pcie_set_irqs(0, irqs);
++ } else {
++ printk("laguna: using shared PCI interrupts: irq%d\n",
++ IRQ_CNS3XXX_PCIE0_DEVICE);
++ }
++
++ return 0;
++}
++subsys_initcall(laguna_pcie_init_irq);
++
+ static int __init laguna_model_setup(void)
+ {
+ u32 __iomem *mem;
+@@ -883,8 +925,33 @@ static int __init laguna_model_setup(voi
+ printk("Running on Gateworks Laguna %s\n", laguna_info.model);
+ cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA,
+ NR_IRQS_CNS3XXX);
+- cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB,
+- NR_IRQS_CNS3XXX + 32);
++
++ /*
++ * If pcie external interrupts are supported and desired
++ * configure IRQ types and configure pin function.
++ * Note that cns3xxx_pciextirq is enabled by default, but can be
++ * unset via the 'noextirq' kernel param or by laguna_pcie_init() if
++ * the baseboard model does not support this hardware feature.
++ */
++ if (cns3xxx_pciextirq) {
++ mem = (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0018);
++ reg = __raw_readl(mem);
++ /* GPIO26 is gpio, EXT_INT[0:2] not gpio func */
++ reg &= ~0x3c000000;
++ reg |= 0x38000000;
++ __raw_writel(reg, mem);
++
++ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT,
++ IRQ_CNS3XXX_GPIOB, NR_IRQS_CNS3XXX + 32);
++
++ irq_set_irq_type(154, IRQ_TYPE_LEVEL_LOW);
++ irq_set_irq_type(93, IRQ_TYPE_LEVEL_HIGH);
++ irq_set_irq_type(94, IRQ_TYPE_LEVEL_HIGH);
++ irq_set_irq_type(95, IRQ_TYPE_LEVEL_HIGH);
++ } else {
++ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT,
++ IRQ_CNS3XXX_GPIOB, NR_IRQS_CNS3XXX + 32);
++ }
+
+ if (strncmp(laguna_info.model, "GW", 2) == 0) {
+ if (laguna_info.config_bitmap & ETH0_LOAD)
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -18,6 +18,7 @@
+ #include <linux/io.h>
+ #include <linux/ioport.h>
+ #include <linux/interrupt.h>
++#include <linux/irq.h>
+ #include <linux/ptrace.h>
+ #include <asm/mach/map.h>
+ #include "cns3xxx.h"
+@@ -27,7 +28,7 @@ struct cns3xxx_pcie {
+ void __iomem *host_regs; /* PCI config registers for host bridge */
+ void __iomem *cfg0_regs; /* PCI Type 0 config registers */
+ void __iomem *cfg1_regs; /* PCI Type 1 config registers */
+- unsigned int irqs[2];
++ unsigned int irqs[5];
+ struct resource res_io;
+ struct resource res_mem;
+ struct hw_pci hw_pci;
+@@ -97,7 +98,7 @@ static inline int check_master_abort(str
+ void __iomem *host_base;
+ u32 sreg, ereg;
+
+- host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual;
++ host_base = (void __iomem *) cnspci->host_regs;
+ sreg = __raw_readw(host_base + 0x6) & 0xF900;
+ ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg
+
+@@ -251,7 +252,7 @@ static struct pci_ops cns3xxx_pcie_ops =
+ static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+ {
+ struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
+- int irq = cnspci->irqs[!!dev->bus->number];
++ int irq = cnspci->irqs[!!dev->bus->number + pin - 1];
+
+ pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
+ pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
+@@ -277,7 +278,12 @@ static struct cns3xxx_pcie cns3xxx_pcie[
+ .end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
+ .flags = IORESOURCE_MEM,
+ },
+- .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
++ .irqs = { IRQ_CNS3XXX_PCIE0_RC,
++ IRQ_CNS3XXX_PCIE0_DEVICE,
++ IRQ_CNS3XXX_PCIE0_DEVICE,
++ IRQ_CNS3XXX_PCIE0_DEVICE,
++ IRQ_CNS3XXX_PCIE0_DEVICE,
++ },
+ .hw_pci = {
+ .domain = 0,
+ .nr_controllers = 1,
+@@ -302,7 +308,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[
+ .end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
+ .flags = IORESOURCE_MEM,
+ },
+- .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
++ .irqs = {
++ IRQ_CNS3XXX_PCIE1_RC,
++ IRQ_CNS3XXX_PCIE1_DEVICE,
++ IRQ_CNS3XXX_PCIE1_DEVICE,
++ IRQ_CNS3XXX_PCIE1_DEVICE,
++ IRQ_CNS3XXX_PCIE1_DEVICE,
++ },
+ .hw_pci = {
+ .domain = 1,
+ .nr_controllers = 1,
+@@ -412,6 +424,14 @@ static int cns3xxx_pcie_abort_handler(un
+ return 0;
+ }
+
++void __init cns3xxx_pcie_set_irqs(int bus, int *irqs)
++{
++ int i;
++
++ for (i = 0; i < 4; i++)
++ cns3xxx_pcie[bus].irqs[i + 1] = irqs[i];
++}
++
+ void __init cns3xxx_pcie_init_late(void)
+ {
+ int i;
+--- a/arch/arm/mach-cns3xxx/core.h
++++ b/arch/arm/mach-cns3xxx/core.h
+@@ -18,8 +18,10 @@ extern void cns3xxx_timer_init(void);
+
+ #ifdef CONFIG_PCI
+ extern void __init cns3xxx_pcie_init_late(void);
++extern void __init cns3xxx_pcie_set_irqs(int bus, int *irqs);
+ #else
+ static inline void __init cns3xxx_pcie_init_late(void) {}
++static inline void cns3xxx_pcie_set_irqs(int bus, int *irqs) {}
+ #endif
+
+ void __init cns3xxx_map_io(void);
--- /dev/null
+--- a/drivers/net/phy/broadcom.c
++++ b/drivers/net/phy/broadcom.c
+@@ -393,6 +393,11 @@ static int bcm5481_config_aneg(struct ph
+ /* Write bits 14:0. */
+ reg |= (1 << 15);
+ phy_write(phydev, 0x18, reg);
++ } else {
++ phy_write(phydev, 0x18, 0xf1e7);
++ phy_write(phydev, 0x1c, 0x8e00);
++
++ phy_write(phydev, 0x1c, 0xa41f);
+ }
+
+ return ret;
--- /dev/null
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -105,6 +105,34 @@ static const struct dwc2_core_params par
+ .uframe_sched = -1,
+ };
+
++static const struct dwc2_core_params params_cns3xxx = {
++ .otg_cap = 2, /* non-HNP/non-SRP capable */
++ .otg_ver = 0, /* 1.3 */
++ .dma_enable = 1,
++ .dma_desc_enable = 0,
++ .speed = 0, /* High Speed */
++ .enable_dynamic_fifo = 1,
++ .en_multiple_tx_fifo = 1,
++ .host_rx_fifo_size = 658, /* 774 DWORDs */
++ .host_nperio_tx_fifo_size = 128, /* 256 DWORDs */
++ .host_perio_tx_fifo_size = 658, /* 512 DWORDs */
++ .max_transfer_size = 65535,
++ .max_packet_count = 511,
++ .host_channels = 16,
++ .phy_type = 1, /* UTMI */
++ .phy_utmi_width = 16, /* 8 bits */
++ .phy_ulpi_ddr = 0, /* Single */
++ .phy_ulpi_ext_vbus = 0,
++ .i2c_enable = 0,
++ .ulpi_fs_ls = 0,
++ .host_support_fs_ls_low_power = 0,
++ .host_ls_low_power_phy_clk = 0, /* 48 MHz */
++ .ts_dline = 0,
++ .reload_ctl = 0,
++ .ahbcfg = 0x10,
++ .uframe_sched = 0,
++};
++
+ /**
+ * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
+ * DWC_otg driver
+@@ -165,6 +193,9 @@ static int dwc2_driver_probe(struct plat
+ /* Default all params to autodetect */
+ dwc2_set_all_params(&defparams, -1);
+ params = &defparams;
++#ifdef CONFIG_ARCH_CNS3XXX
++ params = ¶ms_cns3xxx;
++#endif
+
+ /*
+ * Disable descriptor dma mode by default as the HW can support
projects / openwrt / staging / neocturne.git / commitdiff