{
int ret;
- /* Enable 40MHz radio clock */
- iwl_write32(trans, CSR_GP_CNTRL,
- iwl_read32(trans, CSR_GP_CNTRL) |
- BIT(trans->cfg->csr->flag_init_done));
-
- /* wait for clock to be ready */
- ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- 25000);
- if (ret < 0) {
- IWL_ERR(trans, "Time out access OTP\n");
- } else {
- iwl_set_bits_prph(trans, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_RESET_REQ);
- udelay(5);
- iwl_clear_bits_prph(trans, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_RESET_REQ);
-
- /*
- * CSR auto clock gate disable bit -
- * this is only applicable for HW with OTP shadow RAM
- */
- if (trans->cfg->base_params->shadow_ram_support)
- iwl_set_bit(trans, CSR_DBG_LINK_PWR_MGMT_REG,
- CSR_RESET_LINK_PWR_MGMT_DISABLED);
- }
- return ret;
+ ret = iwl_finish_nic_init(trans);
+ if (ret)
+ return ret;
+
+ iwl_set_bits_prph(trans, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_RESET_REQ);
+ udelay(5);
+ iwl_clear_bits_prph(trans, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_RESET_REQ);
+
+ /*
+ * CSR auto clock gate disable bit -
+ * this is only applicable for HW with OTP shadow RAM
+ */
+ if (trans->cfg->base_params->shadow_ram_support)
+ iwl_set_bit(trans, CSR_DBG_LINK_PWR_MGMT_REG,
+ CSR_RESET_LINK_PWR_MGMT_DISABLED);
+
+ return 0;
}
static int iwl_read_otp_word(struct iwl_trans *trans, u16 addr,
return 0;
}
+
+int iwl_finish_nic_init(struct iwl_trans *trans)
+{
+ int err;
+
+ /*
+ * Set "initialization complete" bit to move adapter from
+ * D0U* --> D0A* (powered-up active) state.
+ */
+ iwl_set_bit(trans, CSR_GP_CNTRL,
+ BIT(trans->cfg->csr->flag_init_done));
+
+ if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
+ udelay(2);
+
+ /*
+ * Wait for clock stabilization; once stabilized, access to
+ * device-internal resources is supported, e.g. iwl_write_prph()
+ * and accesses to uCode SRAM.
+ */
+ err = iwl_poll_bit(trans, CSR_GP_CNTRL,
+ BIT(trans->cfg->csr->flag_mac_clock_ready),
+ BIT(trans->cfg->csr->flag_mac_clock_ready),
+ 25000);
+ if (err < 0)
+ IWL_DEBUG_INFO(trans, "Failed to wake NIC\n");
+
+ return err < 0 ? err : 0;
+}
+IWL_EXPORT_SYMBOL(iwl_finish_nic_init);
*
* GPL LICENSE SUMMARY
*
+ * Copyright (C) 2018 Intel Corporation
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* BSD LICENSE
*
+ * Copyright (C) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
void iwl_clear_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask);
void iwl_force_nmi(struct iwl_trans *trans);
+int iwl_finish_nic_init(struct iwl_trans *trans);
+
/* Error handling */
int iwl_dump_fh(struct iwl_trans *trans, char **buf);
/* reset the device */
iwl_trans_sw_reset(trans);
- /* set INIT_DONE flag */
- iwl_set_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_init_done));
-
- /* and wait for clock stabilization */
- if (trans->cfg->device_family == IWL_DEVICE_FAMILY_8000)
- udelay(2);
-
- err = iwl_poll_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- 25000);
- if (err < 0) {
- IWL_DEBUG_INFO(trans,
- "Failed to reset the card for the dump\n");
+ err = iwl_finish_nic_init(trans);
+ if (err)
return;
- }
}
iwl_trans_read_mem_bytes(trans, base, &table, sizeof(table));
iwl_pcie_apm_config(trans);
- /*
- * Set "initialization complete" bit to move adapter from
- * D0U* --> D0A* (powered-up active) state.
- */
- iwl_set_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_init_done));
-
- /*
- * Wait for clock stabilization; once stabilized, access to
- * device-internal resources is supported, e.g. iwl_write_prph()
- * and accesses to uCode SRAM.
- */
- ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- 25000);
- if (ret < 0) {
- IWL_DEBUG_INFO(trans, "Failed to init the card\n");
+ ret = iwl_finish_nic_init(trans);
+ if (ret)
return ret;
- }
set_bit(STATUS_DEVICE_ENABLED, &trans->status);
if (trans->cfg->base_params->pll_cfg)
iwl_set_bit(trans, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
- /*
- * Set "initialization complete" bit to move adapter from
- * D0U* --> D0A* (powered-up active) state.
- */
- iwl_set_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_init_done));
-
- /*
- * Wait for clock stabilization; once stabilized, access to
- * device-internal resources is supported, e.g. iwl_write_prph()
- * and accesses to uCode SRAM.
- */
- ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- 25000);
- if (ret < 0) {
- IWL_ERR(trans, "Failed to init the card\n");
+ ret = iwl_finish_nic_init(trans);
+ if (ret)
return ret;
- }
if (trans->cfg->host_interrupt_operation_mode) {
/*
iwl_trans_pcie_sw_reset(trans);
- /*
- * Set "initialization complete" bit to move adapter from
- * D0U* --> D0A* (powered-up active) state.
- */
- iwl_set_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_init_done));
-
- /*
- * Wait for clock stabilization; once stabilized, access to
- * device-internal resources is possible.
- */
- ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- 25000);
- if (WARN_ON(ret < 0)) {
- IWL_ERR(trans, "Access time out - failed to enable LP XTAL\n");
+ ret = iwl_finish_nic_init(trans);
+ if (WARN_ON(ret)) {
/* Release XTAL ON request */
__iwl_trans_pcie_clear_bit(trans, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_XTAL_ON);
iwl_set_bit(trans, CSR_GP_CNTRL,
BIT(trans->cfg->csr->flag_mac_access_req));
- iwl_set_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_init_done));
- if (trans->cfg->device_family >= IWL_DEVICE_FAMILY_8000)
- udelay(2);
-
- ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- 25000);
- if (ret < 0) {
- IWL_ERR(trans, "Failed to resume the device (mac ready)\n");
+ ret = iwl_finish_nic_init(trans);
+ if (ret)
return ret;
- }
/*
* Reconfigure IVAR table in case of MSIX or reset ict table in
* in-order to recognize C step driver should read chip version
* id located at the AUX bus MISC address space.
*/
- iwl_set_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_init_done));
- udelay(2);
-
- ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- BIT(trans->cfg->csr->flag_mac_clock_ready),
- 25000);
- if (ret < 0) {
- IWL_DEBUG_INFO(trans, "Failed to wake up the nic\n");
+ ret = iwl_finish_nic_init(trans);
+ if (ret)
goto out_no_pci;
- }
if (iwl_trans_grab_nic_access(trans, &flags)) {
u32 hw_step;