CONFIG_ATHEROS=y
CONFIG_ATHEROS_AR5312=y
CONFIG_ATHEROS_AR5315=y
+CONFIG_ATHEROS_AR5315_PCI=y
# CONFIG_ATM is not set
+# CONFIG_ATMEL is not set
CONFIG_BASE_SMALL=0
+# CONFIG_BCM43XX is not set
# CONFIG_BCM47XX is not set
CONFIG_BITREVERSE=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CSRC_R4K=y
+CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HERMES is not set
# CONFIG_HOSTAP is not set
+CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
# CONFIG_I2C is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_IDE is not set
-# CONFIG_IEEE80211 is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
CONFIG_IRQ_CPU=y
# CONFIG_LEDS_ALIX is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MEMSTICK is not set
+CONFIG_MII=m
CONFIG_MIPS=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_START=0x0
# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
CONFIG_MTD_REDBOOT_PARTS=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_SPIFLASH=y
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NEW_GPIO=y
# CONFIG_NO_IOPORT is not set
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PCI=y
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_DOMAINS=y
CONFIG_PHYLIB=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PRISM54 is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_RTC is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_TRAD_SIGNALS=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB=m
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/paccess.h>
+#include <asm/irq_cpu.h>
+#include <asm/io.h>
+#include "ar531x.h"
+
+#define AR531X_MEM_BASE 0x80800000UL
+#define AR531X_MEM_SIZE 0x00ffffffUL
+#define AR531X_IO_SIZE 0x00007fffUL
+
+#define IDSEL_SHIFT 13
+
+static spinlock_t ar531x_pci_lock = SPIN_LOCK_UNLOCKED;
+static u32 cfgaddr;
+
+static int config_access(int busno, int dev, int func, int where, int size, u32 ptr, int write)
+{
+ u32 address; /* Address to read from */
+ u32 reg;
+ unsigned long flags;
+ int ret = -1;
+
+ if ((busno != 0) || (dev > 3) || (func > 2))
+ return ret;
+
+ spin_lock_irqsave(&ar531x_pci_lock, flags);
+
+ /* Select Configuration access */
+ reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+ reg |= AR5315_PCIMISC_CFG_SEL;
+ sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+ (void)sysRegRead(AR5315_PCI_MISC_CONFIG);
+
+ address = (u32)cfgaddr + (1 << (IDSEL_SHIFT + dev)) + (func << 8) + where;
+
+ if (size == 1)
+ address ^= 0x3;
+ else if (size == 2)
+ address ^= 0x2;
+
+ if (write) {
+ if (size == 1)
+ ret = put_dbe(ptr, (u8 *) address);
+ else if (size == 2)
+ ret = put_dbe(ptr, (u16 *) address);
+ else if (size == 4)
+ ret = put_dbe(ptr, (u32 *) address);
+ } else {
+ if (size == 1)
+ ret = get_dbe(*((u32 *)ptr), (u8 *) address);
+ else if (size == 2)
+ ret = get_dbe(*((u32 *)ptr), (u16 *) address);
+ else if (size == 4)
+ ret = get_dbe(*((u32 *)ptr), (u32 *) address);
+ }
+
+ /* Select Memory access */
+ reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+ reg &= ~AR5315_PCIMISC_CFG_SEL;
+ sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+ (void)sysRegRead(AR5315_PCI_MISC_CONFIG);
+
+ spin_unlock_irqrestore(&ar531x_pci_lock, flags);
+
+ if (ret) {
+ *((u32 *)ptr) = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ar531x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
+{
+ return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, (u32) value, 0);
+}
+
+static int ar531x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
+{
+ return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value, 1);
+}
+
+struct pci_ops ar531x_pci_ops = {
+ .read = ar531x_pci_read,
+ .write = ar531x_pci_write,
+};
+
+static struct resource ar531x_mem_resource = {
+ .name = "AR531x PCI MEM",
+ .start = AR531X_MEM_BASE,
+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource ar531x_io_resource = {
+ .name = "AR531x PCI I/O",
+ .start = 0,
+ .end = AR531X_IO_SIZE,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller ar531x_pci_controller = {
+ .pci_ops = &ar531x_pci_ops,
+ .mem_resource = &ar531x_mem_resource,
+ .io_resource = &ar531x_io_resource,
+};
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return AR5315_IRQ_LCBUS_PCI;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ u32 reg;
+
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
+ pci_write_config_word(dev, 0x40, 0);
+
+ /* Clear any pending Abort or external Interrupts
+ * and enable interrupt processing */
+ reg = sysRegRead(AR5315_PCI_INTEN_REG);
+ reg &= ~AR5315_PCI_INT_ENABLE;
+ sysRegWrite(AR5315_PCI_INTEN_REG, reg);
+
+ reg = sysRegRead(AR5315_PCI_INT_STATUS);
+ reg |= (AR5315_PCI_ABORT_INT | AR5315_PCI_EXT_INT);
+ sysRegWrite(AR5315_PCI_INT_STATUS, reg);
+
+ reg = sysRegRead(AR5315_PCI_INT_MASK);
+ reg |= (AR5315_PCI_EXT_INT | AR5315_PCI_ABORT_INT);
+ sysRegWrite(AR5315_PCI_INT_MASK, reg);
+
+ reg = sysRegRead(AR5315_PCI_INTEN_REG);
+ reg |= AR5315_PCI_INT_ENABLE;
+ sysRegWrite(AR5315_PCI_INTEN_REG, reg);
+
+ return 0;
+}
+
+static void ar5315_pci_fixup(struct pci_dev *dev)
+{
+ struct pci_bus *bus = dev->bus;
+
+ if ((PCI_SLOT(dev->devfn) != 3) || (PCI_FUNC(dev->devfn) != 0) || (bus->number != 0))
+ return;
+
+#define _DEV bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)
+ printk("PCI: fixing up device %d,%d,%d\n", _DEV);
+ /* fix up mbars */
+ config_access(_DEV, PCI_BASE_ADDRESS_0, 4, HOST_PCI_MBAR0, 1);
+ config_access(_DEV, PCI_BASE_ADDRESS_1, 4, HOST_PCI_MBAR1, 1);
+ config_access(_DEV, PCI_BASE_ADDRESS_2, 4, HOST_PCI_MBAR2, 1);
+ config_access(_DEV, PCI_COMMAND, 4,
+ PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL|
+ PCI_COMMAND_INVALIDATE|PCI_COMMAND_PARITY|PCI_COMMAND_SERR|
+ PCI_COMMAND_FAST_BACK, 1);
+#undef _DEV
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar5315_pci_fixup);
+
+int __init ar5315_pci_init(void)
+{
+ u32 reg;
+
+ printk("AR531x PCI init... ");
+
+ cfgaddr = (u32) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
+ set_io_port_base((unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_IO_SIZE - 1, AR531X_IO_SIZE)); /* PCI I/O space */
+
+ reg = sysRegRead(AR5315_RESET);
+ sysRegWrite(AR5315_RESET, reg | AR5315_RESET_PCIDMA);
+
+ udelay(10*1000);
+
+ sysRegWrite(AR5315_RESET, reg & ~AR5315_RESET_PCIDMA);
+ sysRegRead(AR5315_RESET); /* read after */
+
+ udelay(10*1000);
+
+ reg = sysRegRead(AR5315_ENDIAN_CTL);
+ reg |= AR5315_CONFIG_PCIAHB | AR5315_CONFIG_PCIAHB_BRIDGE;
+
+ sysRegWrite(AR5315_ENDIAN_CTL, reg);
+
+ reg = sysRegRead(AR5315_PCICLK);
+ reg = 4;
+ sysRegWrite(AR5315_PCICLK, reg);
+
+ reg = sysRegRead(AR5315_AHB_ARB_CTL);
+ reg |= (ARB_PCI);
+ sysRegWrite(AR5315_AHB_ARB_CTL, reg);
+
+ reg = sysRegRead(AR5315_IF_CTL);
+ reg &= ~(IF_PCI_CLK_MASK | IF_MASK);
+ reg |= (IF_PCI | IF_PCI_HOST | IF_PCI_INTR | (IF_PCI_CLK_OUTPUT_CLK << IF_PCI_CLK_SHIFT));
+
+ sysRegWrite(AR5315_IF_CTL, reg);
+
+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
+ reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+ reg &= ~(AR5315_PCIMISC_RST_MODE);
+ reg |= AR5315_PCIRST_LOW;
+ sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+
+ /* wait for 100 ms */
+ udelay(100*1000);
+
+ /* Bring the PCI out of reset */
+ reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+ reg &= ~(AR5315_PCIMISC_RST_MODE);
+ reg |= (AR5315_PCIRST_HIGH | AR5315_PCICACHE_DIS | 0x8);
+ sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+
+ sysRegWrite(AR5315_PCI_UNCACHE_CFG,
+ 0x1E | /* 1GB uncached */
+ (1 << 5) | /* Enable uncached */
+ (0x2 << 30) /* Base: 0x80000000 */
+ );
+ (void)sysRegRead(AR5315_PCI_UNCACHE_CFG); /* flush */
+
+ udelay(500*1000);
+
+ register_pci_controller(&ar531x_pci_controller);
+
+ printk("done\n");
+ return 0;
+}
+
+arch_initcall(ar5315_pci_init);
projects / openwrt / staging / robimarko.git / commitdiff