#include <common.h>
#include <dm.h>
+#include <malloc.h>
#include <usb.h>
#include <dm/device-internal.h>
#include "usb_ether.h"
+#ifdef CONFIG_DM_ETH
+
+#define USB_BULK_RECV_TIMEOUT 500
+
+int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize)
+{
+ struct usb_device *udev = dev_get_parentdata(dev);
+ struct usb_interface_descriptor *iface_desc;
+ bool ep_in_found = false, ep_out_found = false;
+ struct usb_interface *iface;
+ const int ifnum = 0; /* Always use interface 0 */
+ int ret, i;
+
+ iface = &udev->config.if_desc[ifnum];
+ iface_desc = &udev->config.if_desc[ifnum].desc;
+
+ /* Initialize the ueth_data structure with some useful info */
+ ueth->ifnum = ifnum;
+ ueth->subclass = iface_desc->bInterfaceSubClass;
+ ueth->protocol = iface_desc->bInterfaceProtocol;
+
+ /*
+ * We are expecting a minimum of 3 endpoints - in, out (bulk), and int.
+ * We will ignore any others.
+ */
+ for (i = 0; i < iface_desc->bNumEndpoints; i++) {
+ int ep_addr = iface->ep_desc[i].bEndpointAddress;
+
+ /* is it an BULK endpoint? */
+ if ((iface->ep_desc[i].bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
+ if (ep_addr & USB_DIR_IN && !ep_in_found) {
+ ueth->ep_in = ep_addr &
+ USB_ENDPOINT_NUMBER_MASK;
+ ep_in_found = true;
+ } else if (!(ep_addr & USB_DIR_IN) && !ep_out_found) {
+ ueth->ep_out = ep_addr &
+ USB_ENDPOINT_NUMBER_MASK;
+ ep_out_found = true;
+ }
+ }
+
+ /* is it an interrupt endpoint? */
+ if ((iface->ep_desc[i].bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
+ ueth->ep_int = iface->ep_desc[i].bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
+ ueth->irqinterval = iface->ep_desc[i].bInterval;
+ }
+ }
+ debug("Endpoints In %d Out %d Int %d\n", ueth->ep_in, ueth->ep_out,
+ ueth->ep_int);
+
+ /* Do some basic sanity checks, and bail if we find a problem */
+ if (!ueth->ep_in || !ueth->ep_out || !ueth->ep_int) {
+ debug("%s: %s: Cannot find endpoints\n", __func__, dev->name);
+ return -ENXIO;
+ }
+
+ ueth->rxsize = rxsize;
+ ueth->rxbuf = memalign(rxsize, ARCH_DMA_MINALIGN);
+ if (!ueth->rxbuf)
+ return -ENOMEM;
+
+ ret = usb_set_interface(udev, iface_desc->bInterfaceNumber, ifnum);
+ if (ret) {
+ debug("%s: %s: Cannot set interface: %d\n", __func__, dev->name,
+ ret);
+ return ret;
+ }
+ ueth->pusb_dev = udev;
+
+ return 0;
+}
+
+int usb_ether_deregister(struct ueth_data *ueth)
+{
+ return 0;
+}
+
+int usb_ether_receive(struct ueth_data *ueth, int rxsize)
+{
+ int actual_len;
+ int ret;
+
+ if (rxsize > ueth->rxsize)
+ return -EINVAL;
+ ret = usb_bulk_msg(ueth->pusb_dev,
+ usb_rcvbulkpipe(ueth->pusb_dev, ueth->ep_in),
+ ueth->rxbuf, rxsize, &actual_len,
+ USB_BULK_RECV_TIMEOUT);
+ debug("Rx: len = %u, actual = %u, err = %d\n", rxsize, actual_len, ret);
+ if (ret) {
+ printf("Rx: failed to receive: %d\n", ret);
+ return ret;
+ }
+ if (actual_len > rxsize) {
+ debug("Rx: received too many bytes %d\n", actual_len);
+ return -ENOSPC;
+ }
+ ueth->rxlen = actual_len;
+ ueth->rxptr = 0;
+
+ return actual_len ? 0 : -EAGAIN;
+}
+
+void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes)
+{
+ ueth->rxptr += num_bytes;
+ if (num_bytes < 0 || ueth->rxptr >= ueth->rxlen)
+ ueth->rxlen = 0;
+}
+
+int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp)
+{
+ if (!ueth->rxlen)
+ return 0;
+
+ *ptrp = &ueth->rxbuf[ueth->rxptr];
+
+ return ueth->rxlen - ueth->rxptr;
+}
+
+#else
+
typedef void (*usb_eth_before_probe)(void);
typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum,
struct ueth_data *ss);
return 0;
return -1;
}
+#endif
#define ETH_DATA_LEN 1500 /* Max. octets in payload */
#define ETH_FRAME_LEN PKTSIZE_ALIGN /* Max. octets in frame sans FCS */
+/* TODO(sjg@chromium.org): Remove @pusb_dev when all boards use CONFIG_DM_ETH */
struct ueth_data {
/* eth info */
- struct eth_device eth_dev; /* used with eth_register */
- int phy_id; /* mii phy id */
+#ifdef CONFIG_DM_ETH
+ uint8_t *rxbuf;
+ int rxsize;
+ int rxlen; /* Total bytes available in rxbuf */
+ int rxptr; /* Current position in rxbuf */
+#else
+ struct eth_device eth_dev; /* used with eth_register */
+ /* driver private */
+ void *dev_priv;
+#endif
+ int phy_id; /* mii phy id */
/* usb info */
struct usb_device *pusb_dev; /* this usb_device */
- unsigned char ifnum; /* interface number */
- unsigned char ep_in; /* in endpoint */
- unsigned char ep_out; /* out ....... */
- unsigned char ep_int; /* interrupt . */
- unsigned char subclass; /* as in overview */
- unsigned char protocol; /* .............. */
+ unsigned char ifnum; /* interface number */
+ unsigned char ep_in; /* in endpoint */
+ unsigned char ep_out; /* out ....... */
+ unsigned char ep_int; /* interrupt . */
+ unsigned char subclass; /* as in overview */
+ unsigned char protocol; /* .............. */
unsigned char irqinterval; /* Intervall for IRQ Pipe */
-
- /* driver private */
- void *dev_priv;
};
+#ifdef CONFIG_DM_ETH
+/**
+ * usb_ether_register() - register a new USB ethernet device
+ *
+ * This selects the correct USB interface and figures out the endpoints to use.
+ *
+ * @dev: USB device
+ * @ss: Place to put USB ethernet data
+ * @rxsize: Maximum size to allocate for the receive buffer
+ * @return 0 if OK, -ve on error
+ */
+int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize);
+
+/**
+ * usb_ether_deregister() - deregister a USB ethernet device
+ *
+ * @ueth: USB Ethernet device
+ * @return 0
+ */
+int usb_ether_deregister(struct ueth_data *ueth);
+
+/**
+ * usb_ether_receive() - recieve a packet from the bulk in endpoint
+ *
+ * The packet is stored in the internal buffer ready for processing.
+ *
+ * @ueth: USB Ethernet device
+ * @rxsize: Maximum size to receive
+ * @return 0 if a packet was received, -EAGAIN if not, -ENOSPC if @rxsize is
+ * larger than the size passed ot usb_ether_register(), other -ve on error
+ */
+int usb_ether_receive(struct ueth_data *ueth, int rxsize);
+
+/**
+ * usb_ether_get_rx_bytes() - obtain bytes from the internal packet buffer
+ *
+ * This should be called repeatedly to obtain packet data until it returns 0.
+ * After each packet is processed, call usb_ether_advance_rxbuf() to move to
+ * the next one.
+ *
+ * @ueth: USB Ethernet device
+ * @ptrp: Returns a pointer to the start of the next packet if there is
+ * one available
+ * @return number of bytes available, or 0 if none
+ */
+int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp);
+
+/**
+ * usb_ether_advance_rxbuf() - Advance to the next packet in the internal buffer
+ *
+ * After processing the data returned by usb_ether_get_rx_bytes(), call this
+ * function to move to the next packet. You must specify the number of bytes
+ * you have processed in @num_bytes.
+ *
+ * @ueth: USB Ethernet device
+ * @num_bytes: Number of bytes to skip, or -1 to skip all bytes
+ */
+void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes);
+#else
/*
* Function definitions for each USB ethernet driver go here
* (declaration is unconditional, compilation is conditional)
struct ueth_data *ss);
int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
struct eth_device *eth);
+#endif
#endif /* __USB_ETHER_H__ */
projects / project / bcm63xx / u-boot.git / commitdiff