ipq40xx: dts: add QCA807x properties

This adds necessary DT properties for QCA807x PHY-s to IPQ4019 DTSI.

Also adds the PSGMII PHY as it wont get probed otherwise.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>

diff --git a/target/linux/ipq40xx/patches-5.4/708-arm-dts-ipq4019-QCA807x-properties.patch b/target/linux/ipq40xx/patches-5.4/708-arm-dts-ipq4019-QCA807x-properties.patch
new file mode 100644 (file)
index 0000000..4b04a3c
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.4/708-arm-dts-ipq4019-QCA807x-properties.patch
@@ -0,0 +1,62 @@
+From e0fa88eaa3c176b71e563da68949ac2ab45aaa61 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Fri, 2 Oct 2020 10:43:26 +0200
+Subject: [PATCH] arm: dts: ipq4019: QCA807x properties
+
+This adds necessary DT properties for QCA807x PHY-s to IPQ4019 DTSI.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -8,6 +8,7 @@
+ #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/net/qcom-qca807x.h>
+ 
+ / {
+       #address-cells = <1>;
+@@ -597,22 +598,39 @@
+ 
+                       ethphy0: ethernet-phy@0 {
+                               reg = <0>;
++
++                              qcom,control-dac = <QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS>;
+                       };
+ 
+                       ethphy1: ethernet-phy@1 {
+                               reg = <1>;
++
++                              qcom,control-dac = <QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS>;
+                       };
+ 
+                       ethphy2: ethernet-phy@2 {
+                               reg = <2>;
++
++                              qcom,control-dac = <QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS>;
+                       };
+ 
+                       ethphy3: ethernet-phy@3 {
+                               reg = <3>;
++
++                              qcom,control-dac = <QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS>;
+                       };
+ 
+                       ethphy4: ethernet-phy@4 {
+                               reg = <4>;
++
++                              qcom,control-dac = <QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS>;
++                      };
++
++                      psgmiiphy: psgmii-phy@5 {
++                              reg = <5>;
++
++                              qcom,tx-driver-strength = <PSGMII_QSGMII_TX_DRIVER_300MV>;
++                              qcom,psgmii-az;
+                       };
+               };
+ 

diff --git a/target/linux/ipq40xx/patches-5.4/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-5.4/711-dts-ipq4019-add-ethernet-essedma-node.patch
index 6db4241234ccacc22f256f8d0f3184fdc0136073..7b2ddfe00d5d42c1d20a7ea2d0ac98d0929f061c 100644 (file)
--- a/target/linux/ipq40xx/patches-5.4/711-dts-ipq4019-add-ethernet-essedma-node.patch
+++ b/target/linux/ipq40xx/patches-5.4/711-dts-ipq4019-add-ethernet-essedma-node.patch
@@ -16,7 +16,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 
 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -38,6 +38,8 @@
+@@ -39,6 +39,8 @@
                spi1 = &blsp1_spi2;
                i2c0 = &blsp1_i2c3;
                i2c1 = &blsp1_i2c4;
@@ -25,7 +25,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
        };
  
        cpus {
-@@ -639,6 +641,64 @@
+@@ -657,6 +659,64 @@
                        status = "disabled";
                };