# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
#
-obj-y := setup.o prom.o irq.o memory.o int-handler.o adm5120_info.o
-obj-y += gpio.o
+obj-y := setup.o prom.o irq.o memory.o adm5120_info.o
+obj-y += gpio.o
+obj-y += time.o
EXTRA_AFLAGS := $(CFLAGS)
+++ /dev/null
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Interrupt exception dispatch code.
- *
- */
-#include <linux/autoconf.h>
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-#define STATUS_IE 0x00000001
-
-/* A lot of complication here is taken away because:
- *
- * 1) We handle one interrupt and return, sitting in a loop and moving across
- * all the pending IRQ bits in the cause register is _NOT_ the answer, the
- * common case is one pending IRQ so optimize in that direction.
- *
- * 2) We need not check against bits in the status register IRQ mask, that
- * would make this routine slow as hell.
- *
- * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
- * between like BSD spl() brain-damage.
- *
- * Furthermore, the IRQs on the MIPS board look basically (barring software
- * IRQs which we don't use at all and all external interrupt sources are
- * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
- *
- * MIPS IRQ Source
- * -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Combined hardware interrupt (hw0)
- * 3 Hardware (ignored)
- * 4 Hardware (ignored)
- * 5 Hardware (ignored)
- * 6 Hardware (ignored)
- * 7 R4k timer (what we use)
- *
- * Note: On the SEAD board thing are a little bit different.
- * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
- * wired to UART1.
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ---- R4k Timer
- * Lowest ---- Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
- .text
- .set noreorder
- .set noat
- .align 5
-
-NESTED(mipsIRQ, PT_SIZE, sp)
- SAVE_ALL
- CLI
- .set at
-
- mfc0 s0, CP0_CAUSE
- mfc0 s1, CP0_STATUS
- and s0, s0, s1
-
- /* First we check for r4k counter/timer IRQ. */
- andi a0, s0, CAUSEF_IP7
- beq a0, zero, 1f
- nop
-
- move a0, sp
- jal mips_timer_interrupt
- nop
-
- j ret_from_irq
- nop
-
-1:
- andi a0, s0, CAUSEF_IP2
- beq a0, zero, 1f
- nop
-
- move a0, sp
- jal adm5120_hw0_irqdispatch
- nop
-1:
- j ret_from_irq
- nop
-
-END(mipsIRQ)
-
-
-LEAF(mips_int_lock)
- .set noreorder
- mfc0 v0, CP0_STATUS
- li v1, ~STATUS_IE
- and v1, v1, v0
- mtc0 v1, CP0_STATUS
- j ra
- and v0, v0, STATUS_IE
- .set reorder
-END(mips_int_lock)
-
-
-LEAF(mips_int_unlock)
- mfc0 v0, CP0_STATUS
- and a0, a0, STATUS_IE
- or v0, v0, a0
- mtc0 v0, CP0_STATUS
- j ra
- nop
-END(mips_int_unlock)
-
/*
- * Copyright (C) ADMtek Incorporated.
- * Creator : daniell@admtek.com.tw
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000, 2001 MIPS Technologies, Inc.
- * Copyright (C) 2001 Ralf Baechle
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * $Id$
+ *
+ * ADM5120 specific interrupt handlers
+ *
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
*/
-#include <linux/autoconf.h>
#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/pm.h>
+#include <linux/ioport.h>
#include <asm/irq.h>
-#include <asm/time.h>
-#include <asm/mipsregs.h>
-#include <asm/gdb-stub.h>
#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/bitops.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+
+#define INTC_REG(r) (*(volatile u32 *)(KSEG1ADDR(ADM5120_INTC_BASE) + r))
+
+static void adm5120_intc_irq_unmask(unsigned int irq);
+static void adm5120_intc_irq_mask(unsigned int irq);
+static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type);
+
+static struct irq_chip adm5120_intc_irq_chip = {
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+ .name = "INTC",
+#else
+ .typename = "INTC",
+#endif
+ .unmask = adm5120_intc_irq_unmask,
+ .mask = adm5120_intc_irq_mask,
+ .mask_ack = adm5120_intc_irq_mask,
+ .set_type = adm5120_intc_irq_set_type
+};
-#define MIPS_CPU_TIMER_IRQ 7
-
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-extern irq_desc_t irq_desc[];
-extern asmlinkage void mipsIRQ(void);
-
-int mips_int_lock(void);
-void mips_int_unlock(int);
-
-unsigned int mips_counter_frequency;
-
-#define ADM5120_INTC_REG(reg) (*(volatile u32 *)(KSEG1ADDR(0x12200000+(reg))))
-#define ADM5120_INTC_STATUS ADM5120_INTC_REG(0x00)
-#define ADM5120_INTC_ENABLE ADM5120_INTC_REG(0x08)
-#define ADM5120_INTC_DISABLE ADM5120_INTC_REG(0x0c)
-#define ADM5120_IRQ_MAX 9
-#define ADM5120_IRQ_MASK 0x3ff
+static struct irqaction adm5120_intc_irq_action = {
+ .handler = no_action,
+ .name = "cascade [INTC]"
+};
-void adm5120_hw0_irqdispatch(struct pt_regs *regs)
+static void adm5120_intc_irq_unmask(unsigned int irq)
{
- unsigned long intsrc;
- int i;
-
- intsrc = ADM5120_INTC_STATUS & ADM5120_IRQ_MASK;
-
- if (intsrc) {
- for (i = 0; intsrc; intsrc >>= 1, i++)
- if (intsrc & 0x1)
- do_IRQ(i);
- } else
- spurious_interrupt();
-}
+ unsigned long flags;
-void mips_timer_interrupt(struct pt_regs *regs)
-{
- write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
- ll_timer_interrupt(MIPS_CPU_TIMER_IRQ);
+ irq -= ADM5120_INTC_IRQ_BASE;
+ local_irq_save(flags);
+ INTC_REG(INTC_REG_IRQ_ENABLE) = (1 << irq);
+ local_irq_restore(flags);
}
-/* Main interrupt dispatcher */
-asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+static void adm5120_intc_irq_mask(unsigned int irq)
{
- unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+ unsigned long flags;
- if (cp0_cause & CAUSEF_IP7) {
- mips_timer_interrupt( regs);
- } else if (cp0_cause & CAUSEF_IP2) {
- adm5120_hw0_irqdispatch( regs);
- }
+ irq -= ADM5120_INTC_IRQ_BASE;
+ local_irq_save(flags);
+ INTC_REG(INTC_REG_IRQ_DISABLE) = (1 << irq);
+ local_irq_restore(flags);
}
-void enable_adm5120_irq(unsigned int irq)
+static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type)
{
- int s;
-
- /* Disable all interrupts (FIQ/IRQ) */
- s = mips_int_lock();
-
- if ((irq < 0) || (irq > ADM5120_IRQ_MAX))
- goto err_exit;
-
- ADM5120_INTC_ENABLE = (1<<irq);
-
-err_exit:
-
- /* Restore the interrupts states */
- mips_int_unlock(s);
+ /* TODO: not yet tested */
+#if 1
+ unsigned int sense;
+ unsigned long mode;
+ int err;
+
+ err = 0;
+ sense = flow_type & (IRQ_TYPE_SENSE_MASK);
+ switch (sense) {
+ case IRQ_TYPE_NONE:
+ case IRQ_TYPE_LEVEL_HIGH:
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ switch (irq) {
+ case ADM5120_IRQ_GPIO2:
+ case ADM5120_IRQ_GPIO4:
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+
+ if (err)
+ return err;
+
+ switch (irq) {
+ case ADM5120_IRQ_GPIO2:
+ case ADM5120_IRQ_GPIO4:
+ mode = INTC_REG(INTC_REG_INT_MODE);
+ if (sense == IRQ_TYPE_LEVEL_LOW)
+ mode |= (1 << (irq-ADM5120_INTC_IRQ_BASE));
+ else
+ mode &= (1 << (irq-ADM5120_INTC_IRQ_BASE));
+
+ INTC_REG(INTC_REG_INT_MODE) = mode;
+ /* fallthrogh */
+ default:
+ irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
+ irq_desc[irq].status |= sense;
+ break;
+ }
+#endif
+ return 0;
}
-
-void disable_adm5120_irq(unsigned int irq)
+static void adm5120_intc_irq_dispatch(void)
{
- int s;
-
- /* Disable all interrupts (FIQ/IRQ) */
- s = mips_int_lock();
+ unsigned long status;
+ int irq;
- if ((irq < 0) || (irq > ADM5120_IRQ_MAX))
- goto err_exit;
+#if 1
+ /* dispatch only one IRQ at a time */
+ status = INTC_REG(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
- ADM5120_INTC_DISABLE = (1<<irq);
-
-err_exit:
- /* Restore the interrupts states */
- mips_int_unlock(s);
+ if (status) {
+ irq = ADM5120_INTC_IRQ_BASE+fls(status)-1;
+ do_IRQ(irq);
+ } else
+ spurious_interrupt();
+#else
+ status = INTC_REG(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
+ if (status) {
+ for (irq=ADM5120_INTC_IRQ_BASE; irq <= ADM5120_INTC_IRQ_BASE +
+ INTC_IRQ_LAST; irq++, status >>=1) {
+ if ((status & 1) == 1)
+ do_IRQ(irq);
+ }
+ } else
+ spurious_interrupt();
+#endif
}
-unsigned int startup_adm5120_irq(unsigned int irq)
+asmlinkage void plat_irq_dispatch(void)
{
- enable_adm5120_irq(irq);
- return 0;
-}
+ unsigned long pending;
-void shutdown_adm5120_irq(unsigned int irq)
-{
- disable_adm5120_irq(irq);
-}
+ pending = read_c0_status() & read_c0_cause();
-static inline void ack_adm5120_irq(unsigned int irq_nr)
-{
- ADM5120_INTC_DISABLE = (1 << irq_nr);
+ if (pending & STATUSF_IP7)
+ do_IRQ(ADM5120_IRQ_COUNTER);
+ else if (pending & STATUSF_IP2)
+ adm5120_intc_irq_dispatch();
+ else
+ spurious_interrupt();
}
-
-static void end_adm5120_irq(unsigned int irq_nr)
+#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
+static void __init adm5120_intc_irq_init(int base)
{
- ADM5120_INTC_ENABLE = (1 << irq_nr);
-}
+ int i;
-static hw_irq_controller adm5120_irq_type = {
- .typename = "MIPS",
- .startup = startup_adm5120_irq,
- .shutdown = shutdown_adm5120_irq,
- .enable = enable_adm5120_irq,
- .disable = disable_adm5120_irq,
- .ack = ack_adm5120_irq,
- .end = end_adm5120_irq,
- .set_affinity = NULL,
-};
+ /* disable all interrupts */
+ INTC_REG(INTC_REG_IRQ_DISABLE) = INTC_INT_ALL;
+ /* setup all interrupts to generate IRQ instead of FIQ */
+ INTC_REG(INTC_REG_INT_MODE) = 0;
+ /* set active level for all external interrupts to HIGH */
+ INTC_REG(INTC_REG_INT_LEVEL) = 0;
+ /* disable usage of the TEST_SOURCE register */
+ INTC_REG(INTC_REG_IRQ_SOURCE_SELECT) = 0;
+
+ for(i=ADM5120_INTC_IRQ_BASE; i <= ADM5120_INTC_IRQ_BASE+INTC_IRQ_LAST;
+ i++) {
+ irq_desc[i].status = INTC_IRQ_STATUS;
+ set_irq_chip_and_handler(i, &adm5120_intc_irq_chip,
+ handle_level_irq);
+ }
+ setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action);
+}
-void __init arch_init_irq(void)
-{
- int i;
-
- for (i = 0; i <= ADM5120_IRQ_MAX; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = 0;
- irq_desc[i].depth = 1;
- irq_desc[i].chip = &adm5120_irq_type;
- }
+void __init arch_init_irq(void) {
+ mips_cpu_irq_init();
+ adm5120_intc_irq_init(ADM5120_INTC_IRQ_BASE);
}
#include <asm/io.h>
#include <asm/time.h>
-#include <adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
-#define ADM5120_SOFTRESET 0x12000004
-#define STATUS_IE 0x00000001
-#define ALLINTS (IE_IRQ0 | IE_IRQ5 | STATUS_IE)
-
-void mips_time_init(void);
+extern void adm5120_time_init(void) __init;
-extern unsigned int mips_counter_frequency;
+#define ADM5120_SOFTRESET 0x12000004
void adm5120_restart(char *command)
{
adm5120_halt();
}
-void __init adm5120_time_init(void)
-{
- mips_counter_frequency = adm5120_speed >> 1;
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
- /* to generate the first timer interrupt */
- write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ);
- clear_c0_status(ST0_BEV);
- set_c0_status(ALLINTS);
-}
-
void __init plat_mem_setup(void)
{
printk(KERN_INFO "ADM5120 board setup\n");
board_time_init = adm5120_time_init;
- //board_timer_setup = mips_timer_setup;
_machine_restart = adm5120_restart;
_machine_halt = adm5120_halt;
return adm5120_board_name();
}
-#ifdef CONFIG_USB
static struct resource adm5120_hcd_resources[] = {
[0] = {
- .start = 0x11200000,
- .end = 0x11200084,
+ .start = ADM5120_USBC_BASE,
+ .end = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 0x3,
- .end = 0x3,
+ .start = ADM5120_IRQ_USBC,
+ .end = ADM5120_IRQ_USBC,
.flags = IORESOURCE_IRQ,
},
};
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
-arch_initcall(adm5120_init);
-#endif
+subsys_initcall(adm5120_init);
--- /dev/null
+/*
+ * $Id$
+ *
+ * ADM5120 specific PCI fixups
+ *
+ * Copyright (C) ADMtek Incorporated.
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/pci_regs.h>
+
+#include <asm/delay.h>
+#include <asm/bootinfo.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+
+static void adm5120_pci_fixup(struct pci_dev *dev)
+{
+ if (dev->devfn !=0)
+ return;
+
+ /* setup COMMAND register */
+ pci_write_config_word(dev, PCI_COMMAND,
+ (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
+
+ /* setup CACHE_LINE_SIZE register */
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
+
+ /* setting up BARS */
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120,
+ adm5120_pci_fixup);
+
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ irq = -1;
+#if 1
+ /* FIXME: this code should be working on all boards? */
+ if (slot > 0 && slot < 4)
+ irq = ADM5120_IRQ_PCI0+slot-1;
+#else
+ switch (mips_machtype) {
+ case MACH_ADM5120_RB_111:
+ case MACH_ADM5120_RB_112:
+ case MACH_ADM5120_RB_133:
+ case MACH_ADM5120_RB_133C:
+ case MACH_ADM5120_RB_153:
+ if (slot > 0 && slot < 4)
+ irq = ADM5120_IRQ_PCI0+slot-1;
+ break;
+ default:
+ if (slot > 1 && slot < 5)
+ irq = ADM5120_IRQ_PCI0+slot-2;
+ break;
+ }
+#endif
+ printk(KERN_INFO "PCI: mapping irq for device %s, slot:%u, pin:%u, "
+ "irq:%d\n", pci_name(dev), slot, pin, irq);
+
+ return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
/*
- * Copyright (C) ADMtek Incorporated.
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
- * Copyright (C) 2007 OpenWrt.org
+ * $Id$
+ *
+ * ADM5120 specific PCI operations
+ *
+ * Copyright (C) ADMtek Incorporated.
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
*/
-#include <linux/autoconf.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
volatile u32* pci_config_address_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR);
volatile u32* pci_config_data_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA);
*pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
switch (size) {
- case 1:
- *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xff;
- break;
- case 2:
- *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xffff;
- break;
- default:
- *val = (*pci_config_data_reg);
+ case 1:
+ *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xff;
+ break;
+ case 2:
+ *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xffff;
+ break;
+ default:
+ *val = (*pci_config_data_reg);
+ break;
}
return PCIBIOS_SUCCESSFUL;
}
*pci_config_address_reg = ((bus->number & 0xff) << 0x10) |
((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE;
switch (size) {
- case 1:
- *(volatile u8 *)(((int)pci_config_data_reg) +
+ case 1:
+ *(volatile u8 *)(((int)pci_config_data_reg) +
(where & 3)) = val;
- break;
- case 2:
- *(volatile u16 *)(((int)pci_config_data_reg) +
+ break;
+ case 2:
+ *(volatile u16 *)(((int)pci_config_data_reg) +
(where & 2)) = (val);
- break;
- default:
- *pci_config_data_reg = (val);
+ break;
+ default:
+ *pci_config_data_reg = (val);
}
return PCIBIOS_SUCCESSFUL;
/*
- * Copyright (C) ADMtek Incorporated.
- * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
- * Copyright (C) 2007 OpenWrt.org
+ * $Id$
+ *
+ * ADM5120 PCI Host Controller driver
+ *
+ * Copyright (C) ADMtek Incorporated.
+ * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
*/
-
-#include <linux/autoconf.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
extern struct pci_ops adm5120_pci_ops;
-#define PCI_CMM_IOACC_EN 0x1
-#define PCI_CMM_MEMACC_EN 0x2
-#define PCI_CMM_MASTER_EN 0x4
-#define PCI_CMM_DEF \
- (PCI_CMM_IOACC_EN | PCI_CMM_MEMACC_EN | PCI_CMM_MASTER_EN)
-
-#define PCI_DEF_CACHE_LINE_SZ 4
-
-
-struct resource pci_io_resource = {
+static struct resource pci_io_resource = {
.name = "ADM5120 PCI I/O",
.start = ADM5120_PCIIO_BASE,
.end = ADM5120_PCICFG_ADDR-1,
.flags = IORESOURCE_IO
};
-struct resource pci_mem_resource = {
+static struct resource pci_mem_resource = {
.name = "ADM5120 PCI MEM",
.start = ADM5120_PCIMEM_BASE,
.end = ADM5120_PCIIO_BASE-1,
.mem_resource = &pci_mem_resource,
};
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (slot < 2 || slot > 4)
- return -1;
- return slot + 4;
-}
-
-static void adm5120_pci_fixup(struct pci_dev *dev)
-{
- if (dev->devfn == 0) {
- pci_write_config_word(dev, PCI_COMMAND, PCI_CMM_DEF);
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
- PCI_DEF_CACHE_LINE_SZ);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
- }
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, adm5120_pci_fixup);
-
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
-
static int __init adm5120_pci_setup(void)
{
int pci_bios;
printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no ");
if (pci_bios == 0)
- return 1;
+ return -1;
/* Avoid ISA compat ranges. */
PCIBIOS_MIN_IO = 0x00000000;
#include "adm5120sw.h"
#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
MODULE_DESCRIPTION("ADM5120 ethernet switch driver");
int i, err;
struct net_device *dev;
- err = request_irq(SW_IRQ, adm5120_sw_irq, 0, "ethernet switch", NULL);
+ err = request_irq(ADM5120_IRQ_SWITCH, adm5120_sw_irq, 0, "ethernet switch", NULL);
if (err)
goto out;
memset(netdev_priv(dev), 0, sizeof(struct adm5120_sw));
((struct adm5120_sw*)netdev_priv(dev))->port = i;
dev->base_addr = SW_BASE;
- dev->irq = SW_IRQ;
+ dev->irq = ADM5120_IRQ_SWITCH;
dev->open = adm5120_sw_open;
dev->hard_start_xmit = adm5120_sw_tx;
dev->stop = adm5120_sw_stop;
unregister_netdev(adm5120_devs[i-1]);
free_netdev(adm5120_devs[i-1]);
}
- free_irq(SW_IRQ, NULL);
+ free_irq(ADM5120_IRQ_SWITCH, NULL);
out:
printk(KERN_ERR "ADM5120 Ethernet switch init failed\n");
return err;
free_netdev(adm5120_devs[i-1]);
}
- free_irq(SW_IRQ, NULL);
+ free_irq(ADM5120_IRQ_SWITCH, NULL);
for (i = 0; i < ADM5120_DMA_RXH; i++) {
if (!adm5120_skb_rxh[i])
#define SW_BASE KSEG1ADDR(0x12000000)
#define SW_DEVS 6
-#define SW_IRQ 9
#define ETH_TX_TIMEOUT HZ/4
#define ETH_FCS 4;
#include <linux/tty_flip.h>
#include <linux/console.h>
-#define ADM5120_UART_BASE0 0x12600000
-#define ADM5120_UART_BASE1 0x12800000
-#define ADM5120_UART_SIZE 0x20
-
-#define ADM5120_UART_IRQ0 1
-#define ADM5120_UART_IRQ1 2
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
#define ADM5120_UART_REG(base, reg) \
(*(volatile u32 *)KSEG1ADDR((base)+(reg)))
static void adm5120console_put(const char c)
{
- while ((ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_FR) &
+ while ((ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_FR) &
ADM5120_UART_TXFF) != 0);
- ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_DATA) = c;
+ ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_DATA) = c;
}
static void adm5120console_write(struct console *con, const char *s,
static int __init adm5120console_setup(struct console *con, char *options)
{
/* Set to 115200 baud, 8N1 and enable FIFO */
- ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_L) =
+ ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_L) =
ADM5120_UART_BAUD115200 & 0xff;
- ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_M) =
+ ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_M) =
ADM5120_UART_BAUD115200 >> 8;
- ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_H) =
+ ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_H) =
ADM5120_UART_W8 | ADM5120_UART_FIFO_EN;
/* Enable port */
- ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_CR) =
+ ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_CR) =
ADM5120_UART_EN;
return 0;
static struct uart_port adm5120ser_ports[] = {
{
- .iobase = ADM5120_UART_BASE0,
- .irq = ADM5120_UART_IRQ0,
+ .iobase = ADM5120_UART0_BASE,
+ .irq = ADM5120_IRQ_UART0,
.uartclk = ADM5120_UARTCLK_FREQ,
.fifosize = 16,
.ops = &adm5120ser_ops,
},
#if (CONFIG_ADM5120_NR_UARTS > 1)
{
- .iobase = ADM5120_UART_BASE1,
- .irq = ADM5120_UART_IRQ1,
+ .iobase = ADM5120_UART1_BASE,
+ .irq = ADM5120_IRQ_UART1,
.uartclk = ADM5120_UARTCLK_FREQ,
.fifosize = 16,
.ops = &adm5120ser_ops,
--- /dev/null
+/*
+ * ADM5120 interrupt controller definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in interrupt controller.
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef _ADM5120_INTC_H_
+#define _ADM5120_INTC_H_
+
+/*
+ * INTC register offsets
+ */
+#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */
+#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */
+#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */
+#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */
+#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR
+#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */
+#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */
+#define INTC_REG_IRQ_TEST_SOURCE 0x1C
+#define INTC_REG_IRQ_SOURCE_SELECT 0x20
+#define INTC_REG_INT_LEVEL 0x24
+
+/*
+ * INTC IRQ numbers
+ */
+#define INTC_IRQ_TIMER 0 /* built in timer */
+#define INTC_IRQ_UART0 1 /* built-in UART0 */
+#define INTC_IRQ_UART1 2 /* built-in UART1 */
+#define INTC_IRQ_USBC 3 /* USB Host Controller */
+#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */
+#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */
+#define INTC_IRQ_PCI0 6 /* PCI slot 2 */
+#define INTC_IRQ_PCI1 7 /* PCI slot 3 */
+#define INTC_IRQ_PCI2 8 /* PCI slot 4 */
+#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */
+#define INTC_IRQ_LAST INTC_IRQ_SWITCH
+#define INTC_IRQ_COUNT 10
+
+/*
+ * INTC register bits
+ */
+#define INTC_INT_TIMER ( 1 << INTC_IRQ_TIMER )
+#define INTC_INT_UART0 ( 1 << INTC_IRQ_UART0 )
+#define INTC_INT_UART1 ( 1 << INTC_IRQ_UART1 )
+#define INTC_INT_USBC ( 1 << INTC_IRQ_USBC )
+#define INTC_INT_INTX0 ( 1 << INTC_IRQ_INTX0 )
+#define INTC_INT_INTX1 ( 1 << INTC_IRQ_INTX1 )
+#define INTC_INT_PCI0 ( 1 << INTC_IRQ_PCI0 )
+#define INTC_INT_PCI1 ( 1 << INTC_IRQ_PCI1 )
+#define INTC_INT_PCI2 ( 1 << INTC_IRQ_PCI2 )
+#define INTC_INT_SWITCH ( 1 << INTC_IRQ_SWITCH )
+#define INTC_INT_ALL (( 1 << INTC_IRQ_COUNT)-1)
+
+#endif /* _ADM5120_INTC_H_ */
--- /dev/null
+/*
+ * $Id$
+ *
+ * ADM5120 specific IRQ numbers
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+#ifndef _ADM5120_IRQ_H_
+#define _ADM5120_IRQ_H_
+
+#include <asm/mach-adm5120/adm5120_intc.h>
+
+#define MIPS_IRQ_HW0 2
+#define MIPS_IRQ_COUNTER 7
+#define MIPS_IRQ_COUNT 8
+
+#define ADM5120_CPU_IRQ_BASE 0
+#define ADM5120_INTC_IRQ_BASE (ADM5120_CPU_IRQ_BASE+MIPS_IRQ_COUNT)
+#define ADM5120_SWITCH_IRQ_BASE (ADM5120_INTC_IRQ_BASE+INTC_IRQ_COUNT)
+
+#define ADM5120_CPU_IRQ(x) (ADM5120_CPU_IRQ_BASE + (x))
+#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x))
+
+#define ADM5120_IRQ_INTC ADM5120_CPU_IRQ(MIPS_IRQ_HW0)
+#define ADM5120_IRQ_COUNTER ADM5120_CPU_IRQ(MIPS_IRQ_COUNTER)
+
+#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
+#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0)
+#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1)
+#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC)
+#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
+#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
+#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
+#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
+#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
+#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
+
+#endif
diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig
--- linux-2.6.19.2/arch/mips/Kconfig 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.new/arch/mips/Kconfig 2007-01-23 14:49:38.000000000 +0100
-@@ -12,6 +12,20 @@
+@@ -12,6 +12,21 @@
prompt "System type"
default SGI_IP22
+ select SYS_HAS_CPU_MIPS32_R1
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
++ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
-diff -urN linux-2.6.19.2/arch/mips/pci/Makefile linux-2.6.19.2.new/arch/mips/pci/Makefile
---- linux-2.6.19.2/arch/mips/pci/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/arch/mips/pci/Makefile 2007-01-23 14:49:40.000000000 +0100
-@@ -53,3 +53,4 @@
- obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
-+obj-$(CONFIG_PCI_ADM5120) += ops-adm5120.o pci-adm5120.o
diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h
--- linux-2.6.19.2/include/asm-mips/bootinfo.h 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h 2007-01-23 14:49:40.000000000 +0100
--- /dev/null
+diff -urN linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-adm5120/arch/mips/pci/Makefile
+--- linux-2.6.21.1/arch/mips/pci/Makefile 2007-01-10 20:10:37.000000000 +0100
++++ linux-2.6.21.1-adm5120/arch/mips/pci/Makefile 2007-01-23 14:49:40.000000000 +0100
+@@ -53,3 +53,4 @@
+ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
+ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
++obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o
+--- linux-2.6.21.1.old/include/linux/pci_ids.h 2007-04-27 23:49:26.000000000 +0200
++++ linux-2.6.21.1/include/linux/pci_ids.h 2007-05-31 09:36:56.000000000 +0200
+@@ -1701,6 +1701,9 @@
+ #define PCI_VENDOR_ID_ESDGMBH 0x12fe
+ #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+
++#define PCI_VENDOR_ID_ADMTEK 0x1317
++#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
++
+ #define PCI_VENDOR_ID_SIIG 0x131f
+ #define PCI_SUBVENDOR_ID_SIIG 0x131f
+ #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
projects / openwrt / svn-archive / openwrt.git / commitdiff