--- /dev/null
+From 3ea03a9d512ca19d59315492230e954a1653ff6e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 26 Jan 2016 23:35:16 +0100
+Subject: [PATCH] ARM: BCM5301X: Add DT for D-Link DIR-885L
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's device based on BCM47094 which is quite similar to BCM4709 except
+for higher CPU frequency. This device has 2 flash memories, it boots
+from serial one and stores firmware on NAND. Other than that we define
+standard stuff like LEDs, buttons and UART.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-buffalo-wxr-1900dhp.dtb \
+ bcm4709-netgear-r7000.dtb \
+ bcm4709-netgear-r8000.dtb \
++ bcm47094-dlink-dir-885l.dtb \
+ bcm94708.dtb \
+ bcm94709.dtb \
+ bcm953012k.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -0,0 +1,111 @@
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for D-Link DIR-885L
++ *
++ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
++ model = "D-Link DIR-885L";
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ nand: nand@18028000 {
++ nandcs@0 {
++ partition@0 {
++ label = "firmware";
++ reg = <0x00000000 0x08000000>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ power-white {
++ label = "bcm53xx:white:power";
++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-on";
++ };
++
++ wan-white {
++ label = "bcm53xx:white:wan";
++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ power-amber {
++ label = "bcm53xx:amber:power";
++ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ wan-amber {
++ label = "bcm53xx:amber:wan";
++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ usb3-white {
++ label = "bcm53xx:white:usb3";
++ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ 2ghz {
++ label = "bcm53xx:white:2ghz";
++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ 5ghz {
++ label = "bcm53xx:white:5ghz";
++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++ };
++
++ /* Switch: router / extender */
++ extender {
++ label = "Extender";
++ linux,code = <BTN_0>;
++ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ };
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&uart0 {
++ status = "okay";
++ clock-frequency = <125000000>;
++};
--- /dev/null
+From dd70ccfaa79189feaa78609d44f7c3e7fa1dc6ff Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 23 Mar 2016 16:52:47 +0100
+Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers of few
+ devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+There are few devices that have USB power controlled using GPIO. Linux
+USB host driver (bcma-hcd) already supports this by reading vcc-gpio
+from DT. Set it properly for all known devices.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -139,3 +139,11 @@
+ &uart0 {
+ status = "okay";
+ };
++
++&usb2 {
++ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++};
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -24,17 +24,6 @@
+ reg = <0x00000000 0x08000000>;
+ };
+
+- axi@18000000 {
+- usb3@23000 {
+- reg = <0x00023000 0x1000>;
+-
+- #address-cells = <1>;
+- #size-cells = <1>;
+-
+- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+- };
+- };
+-
+ leds {
+ compatible = "gpio-leds";
+
+@@ -97,3 +86,7 @@
+ &uart0 {
+ status = "okay";
+ };
++
++&usb3 {
++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++};
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -126,3 +126,8 @@
+ };
+ };
+ };
++
++
++&usb2 {
++ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
++};
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -106,3 +106,11 @@
+ };
+ };
+ };
++
++&usb2 {
++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++};
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -109,3 +109,7 @@
+ status = "okay";
+ clock-frequency = <125000000>;
+ };
++
++&usb3 {
++ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -207,6 +207,20 @@
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
++
++ usb2: usb2@21000 {
++ reg = <0x00021000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++ };
++
++ usb3: usb3@23000 {
++ reg = <0x00023000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++ };
+ };
+
+ lcpll0: lcpll0@1800c100 {
--- /dev/null
+From 5a6516ff135555aa53c7d156cd3973b826e011f9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 6 Apr 2016 18:49:55 +0200
+Subject: [PATCH] ARM: BCM5301X: Enable earlycon on tested devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This allows reporting & debugging problems occurring early in the boot
+process.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -17,7 +17,7 @@
+ model = "Buffalo WZR-1750DHP (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -17,7 +17,7 @@
+ model = "Luxul XWC-1000 (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -17,7 +17,7 @@
+ model = "Netgear R6250 V1 (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -17,7 +17,7 @@
+ model = "SmartRG SR400ac";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -17,7 +17,7 @@
+ model = "Buffalo WZR-600DHP2 (BCM47081)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -17,7 +17,7 @@
+ model = "D-Link DIR-885L";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -18,6 +18,10 @@
+ / {
+ interrupt-parent = <&gic>;
+
++ chosen {
++ stdout-path = &uart0;
++ };
++
+ chipcommonA {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18000000 0x00001000>;
+++ /dev/null
-From 3ea03a9d512ca19d59315492230e954a1653ff6e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 26 Jan 2016 23:35:16 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for D-Link DIR-885L
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's device based on BCM47094 which is quite similar to BCM4709 except
-for higher CPU frequency. This device has 2 flash memories, it boots
-from serial one and stores firmware on NAND. Other than that we define
-standard stuff like LEDs, buttons and UART.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 111 ++++++++++++++++++++++++++
- 2 files changed, 112 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
-+ bcm47094-dlink-dir-885l.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
- bcm953012k.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -0,0 +1,111 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for D-Link DIR-885L
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "D-Link DIR-885L";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ nand: nand@18028000 {
-+ nandcs@0 {
-+ partition@0 {
-+ label = "firmware";
-+ reg = <0x00000000 0x08000000>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power-white {
-+ label = "bcm53xx:white:power";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wan-white {
-+ label = "bcm53xx:white:wan";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power-amber {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan-amber {
-+ label = "bcm53xx:amber:wan";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3-white {
-+ label = "bcm53xx:white:usb3";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:white:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:white:5ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ /* Switch: router / extender */
-+ extender {
-+ label = "Extender";
-+ linux,code = <BTN_0>;
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+ clock-frequency = <125000000>;
-+};
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -24,6 +24,26 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ axi@18000000 {
-+ usb2@21000 {
-+ reg = <0x00021000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
- spi {
- compatible = "spi-gpio";
- num-chipselects = <1>;
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -24,6 +24,26 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ axi@18000000 {
-+ usb2@21000 {
-+ reg = <0x00021000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -24,6 +24,17 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ axi@18000000 {
-+ usb2@21000 {
-+ reg = <0x00021000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
+++ /dev/null
-From eb1075cc48d3c315c7403822c33da9588ab76492 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 14 Jan 2015 08:33:25 +0100
-Subject: [PATCH] ARM: BCM5301X: Enable earlyprintk on tested devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 +-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
- 4 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -17,7 +17,7 @@
- model = "Buffalo WZR-1750DHP (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -17,7 +17,7 @@
- model = "Netgear R6250 V1 (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -17,7 +17,7 @@
- model = "Asus RT-N18U (BCM47081)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -17,7 +17,7 @@
- model = "Buffalo WZR-600DHP2 (BCM47081)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -17,7 +17,7 @@
- model = "Buffalo WZR-900DHP (BCM47081)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -17,7 +17,7 @@
- model = "Netgear R8000 (BCM4709)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -17,7 +17,7 @@
- model = "Asus RT-AC56U (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -17,7 +17,7 @@
- model = "Asus RT-AC68U (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -17,7 +17,7 @@
- model = "Luxul XWC-1000 (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -17,7 +17,7 @@
- model = "Buffalo WXR-1900DHP";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -17,7 +17,7 @@
- model = "SmartRG SR400ac";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -17,7 +17,7 @@
- model = "Asus RT-AC87U";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -17,7 +17,7 @@
- model = "Netgear R7000";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -17,7 +17,7 @@
- model = "Linksys EA6300 V1";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -17,7 +17,7 @@
- model = "D-Link DIR-885L";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -17,7 +17,7 @@
- model = "Netgear R8500";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
+ 0x88000000 0x18000000>;
};
- axi@18000000 {
+ spi {
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -21,7 +21,8 @@
+ 0x88000000 0x08000000>;
};
- axi@18000000 {
+ leds {
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -21,7 +21,8 @@
+ 0x88000000 0x08000000>;
};
- axi@18000000 {
+ leds {
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -21,7 +21,8 @@
+ 0x88000000 0x18000000>;
};
- axi@18000000 {
+ leds {
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -21,7 +21,8 @@
---
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -123,6 +123,12 @@
+@@ -103,6 +103,12 @@
#address-cells = <1>;
#size-cells = <0>;
+};
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -138,3 +138,8 @@
- };
+@@ -128,6 +128,10 @@
};
};
-+
+
+&uart0 {
+ status = "okay";
+ clock-frequency = <125000000>;
+};
+
+ &usb2 {
+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -127,3 +127,8 @@
- };
+@@ -108,6 +108,11 @@
};
};
-+
+
+&uart0 {
+ status = "okay";
+ clock-frequency = <125000000>;
+};
++
+ &usb2 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -104,4 +104,5 @@