ramips: add support for YunCore AX820/HWAP-AX820

There are two versions which are identical apart from the enclosure:
  YunCore AX820: indoor ceiling mount AP with integrated antennas
  YunCore HWAP-AX820: outdoor enclosure with external (N) connectors

Hardware specs:
  SoC: MediaTek MT7621DAT
  Flash: 16 MiB SPI NOR
  RAM: 128MiB (DDR3, integrated)
  WiFi: MT7905DAN+MT7975DN 2.4/5GHz 2T2R 802.11ax
  Ethernet: 10/100/1000 Mbps x2 (WAN/PoE+LAN)
  LED: Status (green)
  Button: Reset
  Power: 802.11af/at PoE; DC 12V,1A
  Antennas: AX820(indoor): 4dBi internal; HWAP-AX820(outdoor): external

Flash instructions:
  The "OpenWRT support" version of the AX820 comes with a LEDE-based
  firmware with proprietary MTK drivers and a luci webinterface and
  ssh accessible under 192.168.1.1 on LAN; user root, no password.
  The sysupgrade.bin can be flashed using luci or sysupgrade via ssh,
  you will have to force the upgrade due to a different factory name.
  Remember: Do *not* preserve factory configuration!

MAC addresses as used by OEM firmware:
  use   address   source
  2g    *:0b      Factory 0x0004 (label)
  5g    *         randomly generated
  lan   *:0c      Factory 0xe000
  wan   *:0d      Factory 0xe000 + 1
The wan MAC can also be found in 0xe006 but is not used by OEM dtb.

Signed-off-by: Clemens Hopfer <openwrt@wireloss.net>

diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index 3e8d635eeafd2c78884a0515f08678ef10b13dda..fc3a434bf440c3640c9f3f1b460f00afe96efb27 100644 (file)
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -23,7 +23,8 @@ sitecom,wlr-4100-v1-002)
        ;;
 allnet,all0256n-4m|\
 allnet,all0256n-8m|\
-allnet,all5002)
+allnet,all5002|\
+yuncore,ax820)
        ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
        ;;
 ampedwireless,ally-00x19k|\

diff --git a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
new file mode 100644 (file)
index 0000000..ca1e6ea
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "yuncore,ax820", "mediatek,mt7621-soc";
+       model = "YunCore AX820";
+
+       aliases {
+               led-boot = &led_status_green;
+               led-failsafe = &led_status_green;
+               led-running = &led_status_green;
+               led-upgrade = &led_status_green;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_status_green: status_green {
+                       label = "green:status";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       watchdog {
+               compatible = "linux,wdt-gpio";
+               gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+               hw_algo = "toggle";
+               hw_margin_ms = <200>;
+               always-running;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <80000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "Bootloader";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "Config";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       /* range 0x40000 to 0x50000 is empty in vendor
+                        * firmware, so we do not use it either
+                        */
+
+                       factory: partition@50000 {
+                               label = "Factory";
+                               reg = <0x50000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@90000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x90000 0xf70000>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie1 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0>;
+       };
+};
+
+&gmac0 {
+       nvmem-cells = <&macaddr_factory_e000>;
+       nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "wan";
+                       nvmem-cells = <&macaddr_factory_e000>;
+                       nvmem-cell-names = "mac-address";
+                       mac-address-increment = <1>;
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan";
+               };
+       };
+};
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_e000: macaddr@e000 {
+               reg = <0xe000 0x6>;
+       };
+};

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index e14a25748f93975ae5f04bda4403c5f97477a4d8..20c8a9a2d8072ad8db7b7d7f09d3d577f4ee3629 100644 (file)
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1724,6 +1724,15 @@ define Device/youku_yk-l2
 endef
 TARGET_DEVICES += youku_yk-l2
 
+define Device/yuncore_ax820
+  $(Device/dsa-migration)
+  IMAGE_SIZE := 15808k
+  DEVICE_VENDOR := YunCore
+  DEVICE_MODEL := AX820
+  DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += yuncore_ax820
+
 define Device/zbtlink_zbt-we1326
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index bbc6fa88524f869c0faf555c5f4b858c4ba75993..f2a668b2722790199710222a84aa355c7adc4a55 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -73,6 +73,7 @@ ramips_setup_interfaces()
        ubnt,usw-flex)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
                ;;
+       yuncore,ax820|\
        zyxel,nr7101)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
@@ -178,6 +179,9 @@ ramips_setup_macs()
                }
                label_mac=$lan_mac
                ;;
+       yuncore,ax820)
+               label_mac=$(mtd_get_mac_binary Factory 0x4)
+               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac

diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 711af4e3afb0362b6dbaa27cb2c9944950e5b50c..06d0500037febd3cf39693f5aa0f1f7f5188af00 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -25,9 +25,12 @@ case "$board" in
                [ "$PHYNBR" = "1" ] && \
                        macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
                ;;
-       jcg,q20)
-               [ "$PHYNBR" = "1" ] && \
-                       macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress
+       jcg,q20|\
+       yuncore,ax820)
+               if [ "$PHYNBR" = "1" ]; then
+                       base_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 0x4)" 1)
+                       macaddr_setbit_la "$base_mac" > /sys${DEVPATH}/macaddress
+               fi
                ;;
        linksys,e5600|\
        linksys,ea7300-v1|\