ipq806x: fix aliases node name for Qualcomm IPQ8064/DB149

This device uses a node incorrectly named "alias" instead of
"aliases" since it was introduced.

Remove it without replacement, as the definitions in it don't
seem to be required anyway:

The serial0 definition has never been effective anyway and this
would be the only device deviating from the common setting
"serial0 = &gsbi4_serial;" for ipq8064. (So, maybe the wrong
node prevented us from finding out about the wrong serial
definition?)

The mdio-gpio0 alias was supposed to be removed in d2a2eb7e48f6
anyway, the redundant definition in the alias node was just
overlooked back then.

Fixes: 0fd202f3e563 ("ipq806x: add db149 dts files")
Fixes: d2a2eb7e48f6 ("ipq806x: replace caf nss-gmac driver by upstream stmmac")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
index 5da523a728184b49bf86077eb0c4af00d63dd7a8..625e9a84ffc603a06886c86e071bcf3bcc48a08a 100644 (file)
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -14,11 +14,6 @@
                };
        };
 
-       alias {
-               serial0 = &uart2;
-               mdio-gpio0 = &mdio0;
-       };
-
        chosen {
                stdout-path = "serial0:115200n8";
        };

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts
index e29084d8a9609548eee5d59fc8fbadb77ff4dfbc..e97c16b7e0d22a216dc7b787349196c6483a182e 100644 (file)
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -13,11 +13,6 @@
                        no-map;
                };
        };
-
-       alias {
-               serial0 = &uart2;
-               mdio-gpio0 = &mdio0;
-       };
 };
 
 &qcom_pinmux {
@@ -180,4 +175,4 @@
        phy-mode = "sgmii";
        qcom,id = <3>;
        phy-handle = <&phy7>;
-};
\ No newline at end of file
+};