-LINUX_VERSION-5.10 = .153
-LINUX_KERNEL_HASH-5.10.153 = 3cf2e4519fe451caef0ee0a8beac694612267325f7055fc38d6a990a762f1662
+LINUX_VERSION-5.10 = .154
+LINUX_KERNEL_HASH-5.10.154 = c6ae3d4da4324933160260d0f092a40cd27f9ed03449380790afbe6ce91ee688
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
-@@ -291,6 +291,7 @@ static void xhci_pci_quirks(struct devic
+@@ -274,6 +274,7 @@ static void xhci_pci_quirks(struct devic
pdev->device == 0x0015) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_ZERO_64B_REGS;
#define USB_VENDOR_ID_BELKIN 0x050d
#define USB_DEVICE_ID_FLIP_KVM 0x3201
-@@ -1273,6 +1276,9 @@
+@@ -1274,6 +1277,9 @@
#define USB_VENDOR_ID_XAT 0x2505
#define USB_DEVICE_ID_XAT_CSR 0x0220
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
-@@ -303,6 +303,7 @@ static void xhci_pci_quirks(struct devic
+@@ -286,6 +286,7 @@ static void xhci_pci_quirks(struct devic
if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
-@@ -1530,6 +1530,7 @@ bool snd_usb_get_sample_rate_quirk(struc
+@@ -1531,6 +1531,7 @@ bool snd_usb_get_sample_rate_quirk(struc
case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */
case USB_ID(0x413c, 0xa506): /* Dell AE515 sound bar */
case USB_ID(0x046d, 0x084c): /* Logitech ConferenceCam Connect */
nft_trans_table_update(trans) = true;
list_add_tail(&trans->list, &ctx->net->nft.commit_list);
return 0;
-@@ -7921,11 +7925,10 @@ static int nf_tables_commit(struct net *
+@@ -7918,11 +7922,10 @@ static int nf_tables_commit(struct net *
switch (trans->msg_type) {
case NFT_MSG_NEWTABLE:
if (nft_trans_table_update(trans)) {
kfree(net->ipv6.ip6_blk_hole_entry);
#endif
dst_entries_destroy(&net->ipv6.ip6_dst_ops);
-@@ -6474,6 +6523,9 @@ void __init ip6_route_init_special_entri
+@@ -6480,6 +6529,9 @@ void __init ip6_route_init_special_entri
init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
},
[PORT_NPCM] = {
.name = "Nuvoton 16550",
-@@ -2723,6 +2723,11 @@ serial8250_do_set_termios(struct uart_po
+@@ -2724,6 +2724,11 @@ serial8250_do_set_termios(struct uart_po
unsigned long flags;
unsigned int baud, quot, frac = 0;