This should fix some build problems in b43 with kernel 3.3.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37432
+++ /dev/null
---- a/drivers/bcma/core.c
-+++ b/drivers/bcma/core.c
-@@ -43,6 +43,7 @@ int bcma_core_enable(struct bcma_device
- bcma_aread32(core, BCMA_IOCTL);
-
- bcma_awrite32(core, BCMA_RESET_CTL, 0);
-+ bcma_aread32(core, BCMA_RESET_CTL);
- udelay(1);
-
- bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
+@@ -38,6 +38,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
config BCMA_HOST_SOC
bool
depends on BCMA_DRIVER_MIPS
@@ -146,6 +146,7 @@ config SSB_SFLASH
config SSB_EMBEDDED
bool
- depends on SSB_DRIVER_MIPS
+ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
default y
+#endif /* BCM47XXSFLASH */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -544,6 +544,7 @@ struct bcma_nflash {
+@@ -599,6 +599,7 @@ struct bcma_nflash {
bool boot; /* This is the flash the SoC boots from */
struct mtd_info *mtd;
# Assumption: We are on embedded, if we compile the MIPS core.
--- a/drivers/ssb/driver_chipcommon_sflash.c
+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -1,14 +1,35 @@
+@@ -1,14 +1,22 @@
/*
* Sonics Silicon Backplane
* ChipCommon serial flash interface
+#define NUM_RETRIES 3
+
-+static struct resource ssb_sflash_resource = {
-+ .name = "ssb_sflash",
-+ .start = SSB_FLASH2,
-+ .end = 0,
-+ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
-+};
-+
-+struct platform_device ssb_sflash_dev = {
-+ .name = "bcm47xx-sflash",
-+ .resource = &ssb_sflash_resource,
-+ .num_resources = 1,
-+};
-+
- struct ssb_sflash_tbl_e {
- char *name;
- u32 id;
-@@ -16,7 +37,7 @@ struct ssb_sflash_tbl_e {
- u16 numblocks;
+ static struct resource ssb_sflash_resource = {
+ .name = "ssb_sflash",
+ .start = SSB_FLASH2,
+@@ -17,7 +25,7 @@ static struct resource ssb_sflash_resour
};
--static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
-+static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
- { "M25P20", 0x11, 0x10000, 4, },
- { "M25P40", 0x12, 0x10000, 8, },
-
-@@ -27,7 +48,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
- { 0 },
- };
-
--static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
-+static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
- { "SST25WF512", 1, 0x1000, 16, },
- { "SST25VF512", 0x48, 0x1000, 16, },
- { "SST25WF010", 2, 0x1000, 32, },
-@@ -45,7 +66,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
- { 0 },
+ struct platform_device ssb_sflash_dev = {
+- .name = "ssb_sflash",
++ .name = "bcm47xx-sflash",
+ .resource = &ssb_sflash_resource,
+ .num_resources = 1,
};
-
--static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
-+static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
- { "AT45DB011", 0xc, 256, 512, },
- { "AT45DB021", 0x14, 256, 1024, },
- { "AT45DB041", 0x1c, 256, 2048, },
-@@ -70,10 +91,186 @@ static void ssb_sflash_cmd(struct ssb_ch
+@@ -83,10 +91,185 @@ static void ssb_sflash_cmd(struct ssb_ch
pr_err("SFLASH control command failed (timeout)!\n");
}
/* Initialize serial flash access */
int ssb_sflash_init(struct ssb_chipcommon *cc)
{
-- struct ssb_sflash_tbl_e *e;
+- struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
+ struct bcm47xxsflash *sflash = &cc->sflash;
-+ const struct ssb_sflash_tbl_e *e;
+ const struct ssb_sflash_tbl_e *e;
u32 id, id2;
- switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-@@ -131,10 +328,26 @@ int ssb_sflash_init(struct ssb_chipcommo
- return -ENOTSUPP;
- }
-
+@@ -150,17 +333,21 @@ int ssb_sflash_init(struct ssb_chipcommo
+ sflash->numblocks = e->numblocks;
+ sflash->size = sflash->blocksize * sflash->numblocks;
+ sflash->present = true;
+-
- pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
- e->name, e->blocksize, e->numblocks);
--
-- pr_err("Serial flash support is not implemented yet!\n");
-+ sflash->window = SSB_FLASH2;
-+ sflash->blocksize = e->blocksize;
-+ sflash->numblocks = e->numblocks;
-+ sflash->size = sflash->blocksize * sflash->numblocks;
-+ sflash->present = true;
+ sflash->poll = ssb_sflash_poll;
+ sflash->write = ssb_sflash_write;
+ sflash->erase = ssb_sflash_erase;
+ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+ e->name, sflash->size / 1024, sflash->blocksize,
+ sflash->numblocks);
-+
-+ /* Prepare platform device, but don't register it yet. It's too early,
-+ * malloc (required by device_private_init) is not available yet. */
-+ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
+
+ /* Prepare platform device, but don't register it yet. It's too early,
+ * malloc (required by device_private_init) is not available yet. */
+ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
+- sflash->size;
+ sflash->size;
-+ ssb_sflash_dev.dev.platform_data = sflash;
+ ssb_sflash_dev.dev.platform_data = sflash;
+- pr_err("Serial flash support is not implemented yet!\n");
+-
- return -ENOTSUPP;
+ return 0;
}
.resource = &bcma_sflash_resource,
.num_resources = 1,
};
-@@ -30,7 +37,7 @@ struct bcma_sflash_tbl_e {
- u16 numblocks;
- };
-
--static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
-+static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
- { "M25P20", 0x11, 0x10000, 4, },
- { "M25P40", 0x12, 0x10000, 8, },
-
-@@ -41,7 +48,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
- { 0 },
- };
-
--static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
-+static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
- { "SST25WF512", 1, 0x1000, 16, },
- { "SST25VF512", 0x48, 0x1000, 16, },
- { "SST25WF010", 2, 0x1000, 32, },
-@@ -59,7 +66,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
- { 0 },
- };
-
--static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
-+static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
- { "AT45DB011", 0xc, 256, 512, },
- { "AT45DB021", 0x14, 256, 1024, },
- { "AT45DB041", 0x1c, 256, 2048, },
-@@ -84,12 +91,186 @@ static void bcma_sflash_cmd(struct bcma_
+@@ -84,11 +91,185 @@ static void bcma_sflash_cmd(struct bcma_
bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
}
{
struct bcma_bus *bus = cc->core->bus;
- struct bcma_sflash *sflash = &cc->sflash;
-- struct bcma_sflash_tbl_e *e;
+ struct bcm47xxsflash *sflash = &cc->sflash;
-+ const struct bcma_sflash_tbl_e *e;
+ const struct bcma_sflash_tbl_e *e;
u32 id, id2;
- switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
@@ -150,6 +331,11 @@ int bcma_sflash_init(struct bcma_drv_cc
sflash->numblocks = e->numblocks;
sflash->size = sflash->blocksize * sflash->numblocks;
/** ChipCommon core registers. **/
#define BCMA_CC_ID 0x0000
-@@ -523,19 +524,6 @@ struct bcma_pflash {
+@@ -578,19 +579,6 @@ struct bcma_pflash {
u32 window_size;
};
#ifdef CONFIG_BCMA_NFLASH
struct mtd_info;
-@@ -570,7 +558,7 @@ struct bcma_drv_cc {
+@@ -625,7 +613,7 @@ struct bcma_drv_cc {
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash pflash;
#ifdef CONFIG_BCMA_SFLASH
+++ /dev/null
---- a/drivers/bcma/core.c
-+++ b/drivers/bcma/core.c
-@@ -43,6 +43,7 @@ int bcma_core_enable(struct bcma_device
- bcma_aread32(core, BCMA_IOCTL);
-
- bcma_awrite32(core, BCMA_RESET_CTL, 0);
-+ bcma_aread32(core, BCMA_RESET_CTL);
- udelay(1);
-
- bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
+@@ -38,6 +38,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
config BCMA_HOST_SOC
bool
depends on BCMA_DRIVER_MIPS
@@ -146,6 +146,7 @@ config SSB_SFLASH
config SSB_EMBEDDED
bool
- depends on SSB_DRIVER_MIPS
+ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
default y
# Assumption: We are on embedded, if we compile the MIPS core.
--- a/drivers/ssb/driver_chipcommon_sflash.c
+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -1,14 +1,35 @@
+@@ -1,14 +1,22 @@
/*
* Sonics Silicon Backplane
* ChipCommon serial flash interface
+#define NUM_RETRIES 3
+
-+static struct resource ssb_sflash_resource = {
-+ .name = "ssb_sflash",
-+ .start = SSB_FLASH2,
-+ .end = 0,
-+ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
-+};
-+
-+struct platform_device ssb_sflash_dev = {
-+ .name = "bcm47xx-sflash",
-+ .resource = &ssb_sflash_resource,
-+ .num_resources = 1,
-+};
-+
- struct ssb_sflash_tbl_e {
- char *name;
- u32 id;
-@@ -16,7 +37,7 @@ struct ssb_sflash_tbl_e {
- u16 numblocks;
+ static struct resource ssb_sflash_resource = {
+ .name = "ssb_sflash",
+ .start = SSB_FLASH2,
+@@ -17,7 +25,7 @@ static struct resource ssb_sflash_resour
};
--static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
-+static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
- { "M25P20", 0x11, 0x10000, 4, },
- { "M25P40", 0x12, 0x10000, 8, },
-
-@@ -27,7 +48,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
- { 0 },
- };
-
--static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
-+static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
- { "SST25WF512", 1, 0x1000, 16, },
- { "SST25VF512", 0x48, 0x1000, 16, },
- { "SST25WF010", 2, 0x1000, 32, },
-@@ -45,7 +66,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
- { 0 },
+ struct platform_device ssb_sflash_dev = {
+- .name = "ssb_sflash",
++ .name = "bcm47xx-sflash",
+ .resource = &ssb_sflash_resource,
+ .num_resources = 1,
};
-
--static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
-+static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
- { "AT45DB011", 0xc, 256, 512, },
- { "AT45DB021", 0x14, 256, 1024, },
- { "AT45DB041", 0x1c, 256, 2048, },
-@@ -70,10 +91,186 @@ static void ssb_sflash_cmd(struct ssb_ch
+@@ -83,10 +91,185 @@ static void ssb_sflash_cmd(struct ssb_ch
pr_err("SFLASH control command failed (timeout)!\n");
}
/* Initialize serial flash access */
int ssb_sflash_init(struct ssb_chipcommon *cc)
{
-- struct ssb_sflash_tbl_e *e;
+- struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
+ struct bcm47xxsflash *sflash = &cc->sflash;
-+ const struct ssb_sflash_tbl_e *e;
+ const struct ssb_sflash_tbl_e *e;
u32 id, id2;
- switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-@@ -131,10 +328,26 @@ int ssb_sflash_init(struct ssb_chipcommo
- return -ENOTSUPP;
- }
-
+@@ -150,17 +333,21 @@ int ssb_sflash_init(struct ssb_chipcommo
+ sflash->numblocks = e->numblocks;
+ sflash->size = sflash->blocksize * sflash->numblocks;
+ sflash->present = true;
+-
- pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
- e->name, e->blocksize, e->numblocks);
--
-- pr_err("Serial flash support is not implemented yet!\n");
-+ sflash->window = SSB_FLASH2;
-+ sflash->blocksize = e->blocksize;
-+ sflash->numblocks = e->numblocks;
-+ sflash->size = sflash->blocksize * sflash->numblocks;
-+ sflash->present = true;
+ sflash->poll = ssb_sflash_poll;
+ sflash->write = ssb_sflash_write;
+ sflash->erase = ssb_sflash_erase;
+ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+ e->name, sflash->size / 1024, sflash->blocksize,
+ sflash->numblocks);
-+
-+ /* Prepare platform device, but don't register it yet. It's too early,
-+ * malloc (required by device_private_init) is not available yet. */
-+ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
+
+ /* Prepare platform device, but don't register it yet. It's too early,
+ * malloc (required by device_private_init) is not available yet. */
+ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
+- sflash->size;
+ sflash->size;
-+ ssb_sflash_dev.dev.platform_data = sflash;
+ ssb_sflash_dev.dev.platform_data = sflash;
+- pr_err("Serial flash support is not implemented yet!\n");
+-
- return -ENOTSUPP;
+ return 0;
}
.resource = &bcma_sflash_resource,
.num_resources = 1,
};
-@@ -30,7 +37,7 @@ struct bcma_sflash_tbl_e {
- u16 numblocks;
- };
-
--static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
-+static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
- { "M25P20", 0x11, 0x10000, 4, },
- { "M25P40", 0x12, 0x10000, 8, },
-
-@@ -41,7 +48,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
- { 0 },
- };
-
--static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
-+static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
- { "SST25WF512", 1, 0x1000, 16, },
- { "SST25VF512", 0x48, 0x1000, 16, },
- { "SST25WF010", 2, 0x1000, 32, },
-@@ -59,7 +66,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
- { 0 },
- };
-
--static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
-+static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
- { "AT45DB011", 0xc, 256, 512, },
- { "AT45DB021", 0x14, 256, 1024, },
- { "AT45DB041", 0x1c, 256, 2048, },
-@@ -84,12 +91,186 @@ static void bcma_sflash_cmd(struct bcma_
+@@ -84,11 +91,185 @@ static void bcma_sflash_cmd(struct bcma_
bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
}
{
struct bcma_bus *bus = cc->core->bus;
- struct bcma_sflash *sflash = &cc->sflash;
-- struct bcma_sflash_tbl_e *e;
+ struct bcm47xxsflash *sflash = &cc->sflash;
-+ const struct bcma_sflash_tbl_e *e;
+ const struct bcma_sflash_tbl_e *e;
u32 id, id2;
- switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
@@ -150,6 +331,11 @@ int bcma_sflash_init(struct bcma_drv_cc
sflash->numblocks = e->numblocks;
sflash->size = sflash->blocksize * sflash->numblocks;
/** ChipCommon core registers. **/
#define BCMA_CC_ID 0x0000
-@@ -523,19 +524,6 @@ struct bcma_pflash {
+@@ -578,19 +579,6 @@ struct bcma_pflash {
u32 window_size;
};
#ifdef CONFIG_BCMA_NFLASH
struct mtd_info;
-@@ -569,7 +557,7 @@ struct bcma_drv_cc {
+@@ -624,7 +612,7 @@ struct bcma_drv_cc {
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash pflash;
#ifdef CONFIG_BCMA_SFLASH
+++ /dev/null
---- a/drivers/bcma/core.c
-+++ b/drivers/bcma/core.c
-@@ -43,6 +43,7 @@ int bcma_core_enable(struct bcma_device
- bcma_aread32(core, BCMA_IOCTL);
-
- bcma_awrite32(core, BCMA_RESET_CTL, 0);
-+ bcma_aread32(core, BCMA_RESET_CTL);
- udelay(1);
-
- bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
+@@ -38,6 +38,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
config BCMA_HOST_SOC
bool
depends on BCMA_DRIVER_MIPS
@@ -146,6 +146,7 @@ config SSB_SFLASH
config SSB_EMBEDDED
bool
- depends on SSB_DRIVER_MIPS
+ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
default y
--- /dev/null
+diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
+index 5ff3a4f..36171fd 100644
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -144,7 +144,7 @@ config SSB_SFLASH
+ # Assumption: We are on embedded, if we compile the MIPS core.
+ config SSB_EMBEDDED
+ bool
+- depends on SSB_DRIVER_MIPS
++ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ default y
+
+ config SSB_DRIVER_EXTIF
+diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c
+index 720665c..e84cf04 100644
+--- a/drivers/ssb/driver_chipcommon_sflash.c
++++ b/drivers/ssb/driver_chipcommon_sflash.c
+@@ -9,6 +9,19 @@
+
+ #include "ssb_private.h"
+
++static struct resource ssb_sflash_resource = {
++ .name = "ssb_sflash",
++ .start = SSB_FLASH2,
++ .end = 0,
++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device ssb_sflash_dev = {
++ .name = "ssb_sflash",
++ .resource = &ssb_sflash_resource,
++ .num_resources = 1,
++};
++
+ struct ssb_sflash_tbl_e {
+ char *name;
+ u32 id;
+@@ -16,7 +29,7 @@ struct ssb_sflash_tbl_e {
+ u16 numblocks;
+ };
+
+-static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+@@ -27,7 +40,7 @@ static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+ { 0 },
+ };
+
+-static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+@@ -45,7 +58,7 @@ static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+ { 0 },
+ };
+
+-static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+@@ -73,7 +86,8 @@ static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
+ /* Initialize serial flash access */
+ int ssb_sflash_init(struct ssb_chipcommon *cc)
+ {
+- struct ssb_sflash_tbl_e *e;
++ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
++ const struct ssb_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+@@ -131,9 +145,21 @@ int ssb_sflash_init(struct ssb_chipcommon *cc)
+ return -ENOTSUPP;
+ }
+
++ sflash->window = SSB_FLASH2;
++ sflash->blocksize = e->blocksize;
++ sflash->numblocks = e->numblocks;
++ sflash->size = sflash->blocksize * sflash->numblocks;
++ sflash->present = true;
++
+ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
+ e->name, e->blocksize, e->numblocks);
+
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
++ sflash->size;
++ ssb_sflash_dev.dev.platform_data = sflash;
++
+ pr_err("Serial flash support is not implemented yet!\n");
+
+ return -ENOTSUPP;
+diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
+index 812775a..e55ddf7 100644
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -553,6 +553,14 @@ static int ssb_devices_register(struct ssb_bus *bus)
+ }
+ #endif
+
++#ifdef CONFIG_SSB_SFLASH
++ if (bus->mipscore.sflash.present) {
++ err = platform_device_register(&ssb_sflash_dev);
++ if (err)
++ pr_err("Error registering serial flash\n");
++ }
++#endif
++
+ return 0;
+ error:
+ /* Unwind the already registered devices. */
+diff --git a/drivers/ssb/pcihost_wrapper.c b/drivers/ssb/pcihost_wrapper.c
+index 32ed1fa..69161bb 100644
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci_dev *dev)
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+- pci_set_power_state(dev, 0);
++ pci_set_power_state(dev, PCI_D0);
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
+diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
+index a3b2364..e753fbe 100644
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const char *dump, size_t len,
+ while (cnt < sprom_size_words) {
+ memcpy(tmp, dump, 4);
+ dump += 4;
+- err = strict_strtoul(tmp, 16, &parsed);
++ err = kstrtoul(tmp, 16, &parsed);
+ if (err)
+ return err;
+ sprom[cnt++] = swab16((u16)parsed);
+diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
+index 4671f17..eb507a5 100644
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -243,6 +243,10 @@ static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
+ extern struct platform_device ssb_pflash_dev;
+ #endif
+
++#ifdef CONFIG_SSB_SFLASH
++extern struct platform_device ssb_sflash_dev;
++#endif
++
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
+ extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h
+index afe79d4..6535e47 100644
+--- a/include/linux/ssb/ssb_driver_mips.h
++++ b/include/linux/ssb/ssb_driver_mips.h
+@@ -20,6 +20,18 @@ struct ssb_pflash {
+ u32 window_size;
+ };
+
++#ifdef CONFIG_SSB_SFLASH
++struct ssb_sflash {
++ bool present;
++ u32 window;
++ u32 blocksize;
++ u16 numblocks;
++ u32 size;
++
++ void *priv;
++};
++#endif
++
+ struct ssb_mipscore {
+ struct ssb_device *dev;
+
+@@ -27,6 +39,9 @@ struct ssb_mipscore {
+ struct ssb_serial_port serial_ports[4];
+
+ struct ssb_pflash pflash;
++#ifdef CONFIG_SSB_SFLASH
++ struct ssb_sflash sflash;
++#endif
+ };
+
+ extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
+diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
+index 3a72569..f9f931c 100644
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -172,6 +172,7 @@
+ #define SSB_SPROMSIZE_WORDS_R4 220
+ #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
++#define SSB_SPROMSIZE_WORDS_R10 230
+ #define SSB_SPROM_BASE1 0x1000
+ #define SSB_SPROM_BASE31 0x0800
+ #define SSB_SPROM_REVISION 0x007E
--- /dev/null
+diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
+index 8b4221c..380a200 100644
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
+ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
++ default y
+
+ config BCMA_DRIVER_PCI_HOSTMODE
+ bool "Driver for PCI core working in hostmode"
+diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
+index 79595a0..0215f9a 100644
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -22,6 +22,8 @@
+ struct bcma_bus;
+
+ /* main.c */
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout);
+ int bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
+index 17b26ce..37a5ffe 100644
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -9,6 +9,25 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_aread32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ bool bcma_core_is_enabled(struct bcma_device *core)
+ {
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_device *core, u32 flags)
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+- bcma_awrite32(core, BCMA_IOCTL, flags);
+- bcma_aread32(core, BCMA_IOCTL);
+- udelay(10);
++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_disable);
+
+@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device *core, u32 flags)
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
+index 036c674..b068f98 100644
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -140,8 +140,15 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+ bcma_core_chipcommon_early_init(cc);
+
+ if (cc->core->id.rev >= 20) {
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ u32 pullup = 0, pulldown = 0;
++
++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
++ pullup = 0x402e0;
++ pulldown = 0x20500;
++ }
++
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
+ }
+
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
+index edca73a..5081a8c 100644
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+
++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
++{
++ u32 ilp_ctl, alp_hz;
++
++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
++ return 0;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++ usleep_range(1000, 2000);
++
++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++
++ alp_hz = ilp_ctl * 32768 / 4;
++ return (alp_hz + 50000) / 100000 * 100;
++}
++
++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 freq_tgt_target = 0, freq_tgt_current;
++ u32 pll0, mask;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ /* pmu2_xtaltab0_adfll_485 */
++ switch (xtalfreq) {
++ case 12000:
++ freq_tgt_target = 0x50D52;
++ break;
++ case 20000:
++ freq_tgt_target = 0x307FE;
++ break;
++ case 26000:
++ freq_tgt_target = 0x254EA;
++ break;
++ case 37400:
++ freq_tgt_target = 0x19EF8;
++ break;
++ case 52000:
++ freq_tgt_target = 0x12A75;
++ break;
++ }
++ break;
++ }
++
++ if (!freq_tgt_target) {
++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
++ xtalfreq);
++ return;
++ }
++
++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++
++ if (freq_tgt_current == freq_tgt_target) {
++ bcma_debug(bus, "Target TGT frequency already set\n");
++ return;
++ }
++
++ /* Turn off PLL */
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
++ BCMA_RES_4314_MACPHY_CLK_AVAIL);
++
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++ bcma_wait_value(cc->core, BCMA_CLKCTLST,
++ BCMA_CLKCTLST_HAVEHT, 0, 20000);
++ break;
++ }
++
++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
++
++ /* Flush */
++ if (cc->pmu.rev >= 2)
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++
++ /* TODO: Do we need to update OTP? */
++}
++
++static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ if (xtalfreq == 0)
++ xtalfreq = 20000;
++ bcma_pmu2_pll_init0(cc, xtalfreq);
++ break;
++ }
++}
++
+ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+@@ -66,6 +169,25 @@ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+ min_msk = 0x200D;
+ max_msk = 0xFFFF;
+ break;
++ case BCMA_CHIP_ID_BCM43142:
++ min_msk = BCMA_RES_4314_LPLDO_PU |
++ BCMA_RES_4314_PMU_SLEEP_DIS |
++ BCMA_RES_4314_PMU_BG_PU |
++ BCMA_RES_4314_CBUCK_LPOM_PU |
++ BCMA_RES_4314_CBUCK_PFM_PU |
++ BCMA_RES_4314_CLDO_PU |
++ BCMA_RES_4314_LPLDO2_LVM |
++ BCMA_RES_4314_WL_PMU_PU |
++ BCMA_RES_4314_LDO3P3_PU |
++ BCMA_RES_4314_OTP_PU |
++ BCMA_RES_4314_WL_PWRSW_PU |
++ BCMA_RES_4314_LQ_AVAIL |
++ BCMA_RES_4314_LOGIC_RET |
++ BCMA_RES_4314_MEM_SLEEP |
++ BCMA_RES_4314_MACPHY_RET |
++ BCMA_RES_4314_WL_CORE_READY;
++ max_msk = 0x3FFFFFFF;
++ break;
+ default:
+ bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
+ bus->chipinfo.id);
+@@ -165,6 +287,7 @@ void bcma_pmu_init(struct bcma_drv_cc *cc)
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+ BCMA_CC_PMU_CTL_NOILPONW);
+
++ bcma_pmu_pll_init(cc);
+ bcma_pmu_resources_init(cc);
+ bcma_pmu_workarounds(cc);
+ }
+diff --git a/drivers/bcma/driver_chipcommon_sflash.c b/drivers/bcma/driver_chipcommon_sflash.c
+index e6ed4fe..4d07cce 100644
+--- a/drivers/bcma/driver_chipcommon_sflash.c
++++ b/drivers/bcma/driver_chipcommon_sflash.c
+@@ -30,7 +30,7 @@ struct bcma_sflash_tbl_e {
+ u16 numblocks;
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+@@ -41,7 +41,7 @@ static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ { 0 },
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+@@ -59,7 +59,7 @@ static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ { 0 },
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+ struct bcma_sflash *sflash = &cc->sflash;
+- struct bcma_sflash_tbl_e *e;
++ const struct bcma_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
+index fbf2759..a355e63 100644
+--- a/drivers/bcma/host_pci.c
++++ b/drivers/bcma/host_pci.c
+@@ -275,6 +275,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ { 0, },
+ };
+diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
+index f72f52b..0067422 100644
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -93,6 +93,25 @@ struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
+ return NULL;
+ }
+
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ static void bcma_release_core_dev(struct device *dev)
+ {
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c
+index 8934298..72bf454 100644
+--- a/drivers/bcma/sprom.c
++++ b/drivers/bcma/sprom.c
+@@ -72,12 +72,12 @@ fail:
+ * R/W ops.
+ **************************************************/
+
+-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
++ size_t words)
+ {
+ int i;
+- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+- sprom[i] = bcma_read16(bus->drv_cc.core,
+- offset + (i * 2));
++ for (i = 0; i < words; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
+ }
+
+ /**************************************************
+@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 data)
+ return t[crc ^ data];
+ }
+
+-static u8 bcma_sprom_crc(const u16 *sprom)
++static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
+ {
+ int word;
+ u8 crc = 0xFF;
+
+- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ for (word = 0; word < words - 1; word++) {
+ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+ }
+
+-static int bcma_sprom_check_crc(const u16 *sprom)
++static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
+ {
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+- crc = bcma_sprom_crc(sprom);
+- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ crc = bcma_sprom_crc(sprom, words);
++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u16 *sprom)
+ return 0;
+ }
+
+-static int bcma_sprom_valid(const u16 *sprom)
++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
++ size_t words)
+ {
+ u16 revision;
+ int err;
+
+- err = bcma_sprom_check_crc(sprom);
++ err = bcma_sprom_check_crc(sprom, words);
+ if (err)
+ return err;
+
+- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+- if (revision != 8 && revision != 9) {
++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9 && revision != 10) {
+ pr_err("Unsupported SPROM revision: %d\n", revision);
+ return -ENOENT;
+ }
+
++ bus->sprom.revision = revision;
++ bcma_debug(bus, "Found SPROM revision %d\n", revision);
++
+ return 0;
+ }
+
+@@ -208,9 +212,6 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(bus->sprom.core_pwr_info));
+
+- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+- SSB_SPROM_REVISION_REV;
+-
+ for (i = 0; i < 3; i++) {
+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
+@@ -502,7 +503,7 @@ static bool bcma_sprom_onchip_available(struct bcma_bus *bus)
+ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
+-
++ case BCMA_CHIP_ID_BCM43142:
+ case BCMA_CHIP_ID_BCM43224:
+ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
+@@ -550,7 +551,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ {
+ u16 offset = BCMA_CC_SPROM;
+ u16 *sprom;
+- int err = 0;
++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
++ SSB_SPROMSIZE_WORDS_R10, };
++ int i, err = 0;
+
+ if (!bus->drv_cc.core)
+ return -EOPNOTSUPP;
+@@ -579,32 +582,37 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ }
+ }
+
+- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+- GFP_KERNEL);
+- if (!sprom)
+- return -ENOMEM;
+-
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
+
+ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
+- bcma_sprom_read(bus, offset, sprom);
++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
++ size_t words = sprom_sizes[i];
++
++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, offset, sprom, words);
++ err = bcma_sprom_valid(bus, sprom, words);
++ if (!err)
++ break;
++
++ kfree(sprom);
++ }
+
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
+- err = bcma_sprom_valid(sprom);
+ if (err) {
+- bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
+- goto out;
++ } else {
++ bcma_sprom_extract_r8(bus, sprom);
++ kfree(sprom);
+ }
+
+- bcma_sprom_extract_r8(bus, sprom);
+-
+-out:
+- kfree(sprom);
+ return err;
+ }
+diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
+index 2e34db8..622fc50 100644
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -144,6 +144,7 @@ struct bcma_host_ops {
+
+ /* Chip IDs of PCIe devices */
+ #define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43142 43142
+ #define BCMA_CHIP_ID_BCM43224 43224
+ #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
+ #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
+diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
+index b8b09ea..c49e1a1 100644
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -330,6 +330,8 @@
+ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
+ #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+@@ -355,6 +357,11 @@
+ #define BCMA_CC_REGCTL_DATA 0x065C
+ #define BCMA_CC_PLLCTL_ADDR 0x0660
+ #define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
+ #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
+ /* NAND flash MLC controller registers (corerev >= 38) */
+ #define BCMA_CC_NAND_REVISION 0x0C00
+@@ -435,6 +442,23 @@
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
+
++/* PMU rev 15 */
++#define BCMA_CC_PMU15_PLL_PLLCTL0 0
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
++
+ /* ALP clock on pre-PMU chips */
+ #define BCMA_CC_PMU_ALP_CLOCK 20000000
+ /* HT clock for systems with PMU-enabled chipcommon */
+@@ -507,6 +531,37 @@
+ #define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
+ #define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
+
++#define BCMA_RES_4314_LPLDO_PU BIT(0)
++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
++#define BCMA_RES_4314_PMU_BG_PU BIT(2)
++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
++#define BCMA_RES_4314_CLDO_PU BIT(5)
++#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
++#define BCMA_RES_4314_WL_PMU_PU BIT(7)
++#define BCMA_RES_4314_LNLDO_PU BIT(8)
++#define BCMA_RES_4314_LDO3P3_PU BIT(9)
++#define BCMA_RES_4314_OTP_PU BIT(10)
++#define BCMA_RES_4314_XTAL_PU BIT(11)
++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
++#define BCMA_RES_4314_LQ_AVAIL BIT(13)
++#define BCMA_RES_4314_LOGIC_RET BIT(14)
++#define BCMA_RES_4314_MEM_SLEEP BIT(15)
++#define BCMA_RES_4314_MACPHY_RET BIT(16)
++#define BCMA_RES_4314_WL_CORE_READY BIT(17)
++#define BCMA_RES_4314_ILP_REQ BIT(18)
++#define BCMA_RES_4314_ALP_AVAIL BIT(19)
++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
++#define BCMA_RES_4314_RADIO_PU BIT(23)
++#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
++#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
++#define BCMA_RES_4314_RX_LDO_PU BIT(26)
++#define BCMA_RES_4314_TX_LDO_PU BIT(27)
++#define BCMA_RES_4314_HT_AVAIL BIT(28)
++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
++
+ /* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
ARRAY_SIZE(wgt634u_devices));
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
-@@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS
+@@ -136,10 +136,15 @@ config SSB_DRIVER_MIPS
If unsure, say N
# Assumption: We are on embedded, if we compile the MIPS core.
config SSB_EMBEDDED
bool
+- depends on SSB_DRIVER_MIPS
++ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ default y
+
+ config SSB_DRIVER_EXTIF
@@ -160,4 +165,12 @@ config SSB_DRIVER_GIGE
If unsure, say N
#include "ssb_private.h"
-@@ -280,10 +282,76 @@ static void calc_fast_powerup_delay(stru
+@@ -280,13 +282,79 @@ static void calc_fast_powerup_delay(stru
cc->fast_pwrup_delay = tmp;
}
+
if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++ ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
@@ -297,6 +365,11 @@ void ssb_chipcommon_init(struct ssb_chip
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
if (crystalfreq)
e = pmu0_plltab_find_entry(crystalfreq);
if (!e)
+@@ -111,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -139,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set PDIV in PLL control 0. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+@@ -250,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -276,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set p1div and p2div. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_
u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
ssb_pmu0_pllinit_r0(cc, crystalfreq);
break;
case 0x4322:
-@@ -339,6 +346,8 @@ static void ssb_pmu_pll_init(struct ssb_
+@@ -339,10 +346,11 @@ static void ssb_pmu_pll_init(struct ssb_
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
}
break;
+ case 43222:
+ break;
default:
- ssb_printk(KERN_ERR PFX
- "ERROR: PLL init unknown for device %04X\n",
-@@ -427,6 +436,7 @@ static void ssb_pmu_resources_init(struc
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PLL init unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PLL init unknown for device %04X\n",
++ bus->chip_id);
+ }
+ }
+
+@@ -427,6 +435,7 @@ static void ssb_pmu_resources_init(struc
min_msk = 0xCBB;
break;
case 0x4322:
/* We keep the default settings:
* min_msk = 0xCBB
* max_msk = 0x7FFFF
-@@ -607,3 +617,90 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
+@@ -462,9 +471,8 @@ static void ssb_pmu_resources_init(struc
+ max_msk = 0xFFFFF;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU resource config unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU resource config unknown for device %04X\n",
++ bus->chip_id);
+ }
+
+ if (updown_tab) {
+@@ -516,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+
+- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+- cc->pmu.rev, pmucap);
++ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
++ cc->pmu.rev, pmucap);
+
+ if (cc->pmu.rev == 1)
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+@@ -607,3 +615,102 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
+ case 0x5354:
+ ssb_pmu_get_alp_clock_clk0(cc);
+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PMU alp clock unknown for device %04X\n",
-+ bus->chip_id);
++ ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+}
+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ return 240000000;
+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PMU cpu clock unknown for device %04X\n",
-+ bus->chip_id);
++ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+}
+ case 0x5354:
+ return 120000000;
+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PMU controlclock unknown for device %04X\n",
-+ bus->chip_id);
++ ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+}
+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ break;
+ case 43222:
-+ /* TODO: BCM43222 requires updating PLLs too */
-+ return;
++ if (spuravoid == 1) {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
++ } else {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
++ }
++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -0,0 +1,18 @@
+@@ -0,0 +1,166 @@
+/*
+ * Sonics Silicon Backplane
+ * ChipCommon serial flash interface
+
+#include "ssb_private.h"
+
++static struct resource ssb_sflash_resource = {
++ .name = "ssb_sflash",
++ .start = SSB_FLASH2,
++ .end = 0,
++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device ssb_sflash_dev = {
++ .name = "ssb_sflash",
++ .resource = &ssb_sflash_resource,
++ .num_resources = 1,
++};
++
++struct ssb_sflash_tbl_e {
++ char *name;
++ u32 id;
++ u32 blocksize;
++ u16 numblocks;
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
++ { "M25P20", 0x11, 0x10000, 4, },
++ { "M25P40", 0x12, 0x10000, 8, },
++
++ { "M25P16", 0x14, 0x10000, 32, },
++ { "M25P32", 0x15, 0x10000, 64, },
++ { "M25P64", 0x16, 0x10000, 128, },
++ { "M25FL128", 0x17, 0x10000, 256, },
++ { 0 },
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
++ { "SST25WF512", 1, 0x1000, 16, },
++ { "SST25VF512", 0x48, 0x1000, 16, },
++ { "SST25WF010", 2, 0x1000, 32, },
++ { "SST25VF010", 0x49, 0x1000, 32, },
++ { "SST25WF020", 3, 0x1000, 64, },
++ { "SST25VF020", 0x43, 0x1000, 64, },
++ { "SST25WF040", 4, 0x1000, 128, },
++ { "SST25VF040", 0x44, 0x1000, 128, },
++ { "SST25VF040B", 0x8d, 0x1000, 128, },
++ { "SST25WF080", 5, 0x1000, 256, },
++ { "SST25VF080B", 0x8e, 0x1000, 256, },
++ { "SST25VF016", 0x41, 0x1000, 512, },
++ { "SST25VF032", 0x4a, 0x1000, 1024, },
++ { "SST25VF064", 0x4b, 0x1000, 2048, },
++ { 0 },
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
++ { "AT45DB011", 0xc, 256, 512, },
++ { "AT45DB021", 0x14, 256, 1024, },
++ { "AT45DB041", 0x1c, 256, 2048, },
++ { "AT45DB081", 0x24, 256, 4096, },
++ { "AT45DB161", 0x2c, 512, 4096, },
++ { "AT45DB321", 0x34, 512, 8192, },
++ { "AT45DB642", 0x3c, 1024, 8192, },
++ { 0 },
++};
++
++static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
++{
++ int i;
++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
++ SSB_CHIPCO_FLASHCTL_START | opcode);
++ for (i = 0; i < 1000; i++) {
++ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) &
++ SSB_CHIPCO_FLASHCTL_BUSY))
++ return;
++ cpu_relax();
++ }
++ pr_err("SFLASH control command failed (timeout)!\n");
++}
++
+/* Initialize serial flash access */
+int ssb_sflash_init(struct ssb_chipcommon *cc)
+{
++ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
++ const struct ssb_sflash_tbl_e *e;
++ u32 id, id2;
++
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
++
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++
++ switch (id) {
++ case 0xbf:
++ for (e = ssb_sflash_sst_tbl; e->name; e++) {
++ if (e->id == id2)
++ break;
++ }
++ break;
++ case 0x13:
++ return -ENOTSUPP;
++ default:
++ for (e = ssb_sflash_st_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ break;
++ }
++ if (!e->name) {
++ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n",
++ id, id2);
++ return -ENOTSUPP;
++ }
++
++ break;
++ case SSB_CHIPCO_FLASHT_ATSER:
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
++
++ for (e = ssb_sflash_at_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ if (!e->name) {
++ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n",
++ id);
++ return -ENOTSUPP;
++ }
++
++ break;
++ default:
++ pr_err("Unsupported flash type\n");
++ return -ENOTSUPP;
++ }
++
++ sflash->window = SSB_FLASH2;
++ sflash->blocksize = e->blocksize;
++ sflash->numblocks = e->numblocks;
++ sflash->size = sflash->blocksize * sflash->numblocks;
++ sflash->present = true;
++
++ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
++ e->name, e->blocksize, e->numblocks);
++
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
++ sflash->size;
++ ssb_sflash_dev.dev.platform_data = sflash;
++
+ pr_err("Serial flash support is not implemented yet!\n");
+
+ return -ENOTSUPP;
}
--- /dev/null
+++ b/drivers/ssb/driver_gpio.c
-@@ -0,0 +1,176 @@
+@@ -0,0 +1,210 @@
+/*
+ * Sonics Silicon Backplane
+ * GPIO driver
+ ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
+}
+
++static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ return ssb_mips_irq(bus->chipco.dev) + 2;
++ else
++ return -EINVAL;
++}
++
+static int ssb_gpio_chipco_init(struct ssb_bus *bus)
+{
+ struct gpio_chip *chip = &bus->gpio;
+ chip->set = ssb_gpio_chipco_set_value;
+ chip->direction_input = ssb_gpio_chipco_direction_input;
+ chip->direction_output = ssb_gpio_chipco_direction_output;
++ chip->to_irq = ssb_gpio_chipco_to_irq;
+ chip->ngpio = 16;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+ return 0;
+}
+
++static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ return ssb_mips_irq(bus->extif.dev) + 2;
++ else
++ return -EINVAL;
++}
++
+static int ssb_gpio_extif_init(struct ssb_bus *bus)
+{
+ struct gpio_chip *chip = &bus->gpio;
+ chip->set = ssb_gpio_extif_set_value;
+ chip->direction_input = ssb_gpio_extif_direction_input;
+ chip->direction_output = ssb_gpio_extif_direction_output;
++ chip->to_irq = ssb_gpio_extif_to_irq;
+ chip->ngpio = 5;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+
+ return -1;
+}
++
++int ssb_gpio_unregister(struct ssb_bus *bus)
++{
++ if (ssb_chipco_available(&bus->chipco) ||
++ ssb_extif_available(&bus->extif)) {
++ return gpiochip_remove(&bus->gpio);
++ } else {
++ SSB_WARN_ON(1);
++ }
++
++ return -1;
++}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
-@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
+@@ -10,6 +10,7 @@
+
+ #include <linux/ssb/ssb.h>
+
++#include <linux/mtd/physmap.h>
+ #include <linux/serial.h>
+ #include <linux/serial_core.h>
+ #include <linux/serial_reg.h>
+@@ -17,6 +18,25 @@
+
+ #include "ssb_private.h"
+
++static const char * const part_probes[] = { "bcm47xxpart", NULL };
++
++static struct physmap_flash_data ssb_pflash_data = {
++ .part_probe_types = part_probes,
++};
++
++static struct resource ssb_pflash_resource = {
++ .name = "ssb_pflash",
++ .flags = IORESOURCE_MEM,
++};
++
++struct platform_device ssb_pflash_dev = {
++ .name = "physmap-flash",
++ .dev = {
++ .platform_data = &ssb_pflash_data,
++ },
++ .resource = &ssb_pflash_resource,
++ .num_resources = 1,
++};
+
+ static inline u32 mips_read32(struct ssb_mipscore *mcore,
+ u16 offset)
+@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d
+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
+ ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ }
+- ssb_dprintk(KERN_INFO PFX
+- "set_irq: core 0x%04x, irq %d => %d\n",
+- dev->id.coreid, oldirq+2, irq+2);
++ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.coreid, oldirq+2, irq+2);
+ }
+
+ static void print_irq(struct ssb_device *dev, unsigned int irq)
+ {
+- int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- ssb_dprintk(KERN_INFO PFX
+- "core 0x%04x, irq :", dev->id.coreid);
+- for (i = 0; i <= 6; i++) {
+- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+- }
+- ssb_dprintk("\n");
++ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
++ dev->id.coreid,
++ irq_name[0], irq == 0 ? "*" : " ",
++ irq_name[1], irq == 1 ? "*" : " ",
++ irq_name[2], irq == 2 ? "*" : " ",
++ irq_name[3], irq == 3 ? "*" : " ",
++ irq_name[4], irq == 4 ? "*" : " ",
++ irq_name[5], irq == 5 ? "*" : " ",
++ irq_name[6], irq == 6 ? "*" : " ");
+ }
+
+ static void dump_irq(struct ssb_bus *bus)
+@@ -178,9 +199,9 @@ static void ssb_mips_serial_init(struct
{
struct ssb_bus *bus = mcore->dev->bus;
mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
else
mcore->nr_serial_ports = 0;
-@@ -190,16 +190,33 @@ static void ssb_mips_flash_detect(struct
+@@ -189,17 +210,42 @@ static void ssb_mips_serial_init(struct
+ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
{
struct ssb_bus *bus = mcore->dev->bus;
++ struct ssb_pflash *pflash = &mcore->pflash;
- mcore->flash_buswidth = 2;
- if (bus->chipco.dev) {
- mcore->flash_window_size = 0x02000000;
+ /* When there is no chipcommon on the bus there is 4MB flash */
+ if (!ssb_chipco_available(&bus->chipco)) {
-+ mcore->pflash.present = true;
-+ mcore->pflash.buswidth = 2;
-+ mcore->pflash.window = SSB_FLASH1;
-+ mcore->pflash.window_size = SSB_FLASH1_SZ;
-+ return;
++ pflash->present = true;
++ pflash->buswidth = 2;
++ pflash->window = SSB_FLASH1;
++ pflash->window_size = SSB_FLASH1_SZ;
++ goto ssb_pflash;
+ }
+
+ /* There is ChipCommon, so use it to read info about flash */
+ break;
+ case SSB_CHIPCO_FLASHT_PARA:
+ pr_debug("Found parallel flash\n");
-+ mcore->pflash.present = true;
-+ mcore->pflash.window = SSB_FLASH2;
-+ mcore->pflash.window_size = SSB_FLASH2_SZ;
++ pflash->present = true;
++ pflash->window = SSB_FLASH2;
++ pflash->window_size = SSB_FLASH2_SZ;
if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
& SSB_CHIPCO_CFG_DS16) == 0)
- mcore->flash_buswidth = 1;
- } else {
- mcore->flash_window = 0x1fc00000;
- mcore->flash_window_size = 0x00400000;
-+ mcore->pflash.buswidth = 1;
++ pflash->buswidth = 1;
+ else
-+ mcore->pflash.buswidth = 2;
++ pflash->buswidth = 2;
+ break;
++ }
++
++ssb_pflash:
++ if (pflash->present) {
++ ssb_pflash_data.width = pflash->buswidth;
++ ssb_pflash_resource.start = pflash->window;
++ ssb_pflash_resource.end = pflash->window + pflash->window_size;
}
}
-@@ -208,9 +225,12 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+@@ -208,9 +254,12 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
struct ssb_bus *bus = mcore->dev->bus;
u32 pll_type, n, m, rate = 0;
ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
} else
return 0;
-@@ -246,9 +266,9 @@ void ssb_mipscore_init(struct ssb_mipsco
+@@ -238,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ if (!mcore->dev)
+ return; /* We don't have a MIPS core */
+
+- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
++ ssb_dbg("Initializing MIPS core...\n");
+
+ bus = mcore->dev->bus;
+ hz = ssb_clockspeed(bus);
+@@ -246,9 +295,9 @@ void ssb_mipscore_init(struct ssb_mipsco
hz = 100000000;
ns = 1000000000 / hz;
ssb_chipco_timing_init(&bus->chipco, ns);
/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
+@@ -286,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ break;
+ }
+ }
+- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
++ ssb_dbg("after irq reconfiguration\n");
+ dump_irq(bus);
+
+ ssb_mips_serial_init(mcore);
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
+ return -ENODEV;
+ }
+
+- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+- pci_name(d));
++ ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ return;
+
+- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
++ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
+ if (pcibios_enable_device(dev, ~0) < 0) {
+- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
++ ssb_err("PCI: SSB bridge enable failed\n");
+ return;
+ }
+
+@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
+
+ /* Make sure our latency is high enough to handle the devices behind us */
+ lat = 168;
+- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+- pci_name(dev), lat);
++ ssb_info("PCI: Fixing latency timer of device %s to %u\n",
++ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+@@ -323,7 +322,7 @@ static void __devinit ssb_pcicore_init_h
+ return;
+ extpci_core = pc;
+
+- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
++ ssb_dbg("PCIcore in host mode found\n");
+ /* Reset devices on the external PCI bus */
+ val = SSB_PCICORE_CTL_RST_OE;
+ val |= SSB_PCICORE_CTL_CLK_OE;
+@@ -338,7 +337,7 @@ static void __devinit ssb_pcicore_init_h
+ udelay(1); /* Assertion time demanded by the PCI standard */
+
+ if (pc->dev->bus->has_cardbus_slot) {
+- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
++ ssb_dbg("CardBus slot detected\n");
+ pc->cardbusmode = 1;
+ /* GPIO 1 resets the bridge */
+ ssb_gpio_out(pc->dev->bus, 1, 1);
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -4,11 +4,13 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/ssb/ssb_driver_pci.h>
-@@ -32,6 +34,39 @@ int ssb_watchdog_timer_set(struct ssb_bu
+@@ -32,6 +34,38 @@ int ssb_watchdog_timer_set(struct ssb_bu
}
EXPORT_SYMBOL(ssb_watchdog_timer_set);
+ bus->busnumber, &wdt,
+ sizeof(wdt));
+ if (IS_ERR(pdev)) {
-+ ssb_dprintk(KERN_INFO PFX
-+ "can not register watchdog device, err: %li\n",
-+ PTR_ERR(pdev));
++ ssb_dbg("can not register watchdog device, err: %li\n",
++ PTR_ERR(pdev));
+ return PTR_ERR(pdev);
+ }
+
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_gige.h>
-@@ -140,19 +141,6 @@ static void ssb_device_put(struct ssb_de
- put_device(dev->dev);
- }
-
--static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
--{
-- if (drv)
-- get_driver(&drv->drv);
-- return drv;
--}
--
--static inline void ssb_driver_put(struct ssb_driver *drv)
--{
-- if (drv)
-- put_driver(&drv->drv);
--}
--
- static int ssb_device_resume(struct device *dev)
- {
- struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
-@@ -250,11 +238,9 @@ int ssb_devices_freeze(struct ssb_bus *b
- ssb_device_put(sdev);
- continue;
- }
-- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
-- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
-- ssb_device_put(sdev);
-+ sdrv = drv_to_ssb_drv(sdev->dev->driver);
-+ if (SSB_WARN_ON(!sdrv->remove))
- continue;
-- }
- sdrv->remove(sdev);
- ctx->device_frozen[i] = 1;
- }
-@@ -293,7 +279,6 @@ int ssb_devices_thaw(struct ssb_freeze_c
- dev_name(sdev->dev));
+@@ -289,8 +290,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
+
+ err = sdrv->probe(sdev, &sdev->id);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+- dev_name(sdev->dev));
++ ssb_err("Failed to thaw device %s\n",
++ dev_name(sdev->dev));
result = err;
}
-- ssb_driver_put(sdrv);
- ssb_device_put(sdev);
- }
-
-@@ -449,6 +434,11 @@ static void ssb_devices_unregister(struc
+ ssb_driver_put(sdrv);
+@@ -449,10 +450,23 @@ static void ssb_devices_unregister(struc
if (sdev->dev)
device_unregister(sdev->dev);
}
}
void ssb_bus_unregister(struct ssb_bus *bus)
-@@ -577,6 +567,8 @@ static int __devinit ssb_attach_queued_b
+ {
++ int err;
++
++ err = ssb_gpio_unregister(bus);
++ if (err == -EBUSY)
++ ssb_dbg("Some GPIOs are still in use\n");
++ else if (err)
++ ssb_dbg("Can not unregister GPIO driver: %i\n", err);
++
+ ssb_buses_lock();
+ ssb_devices_unregister(bus);
+ list_del(&bus->list);
+@@ -498,8 +512,7 @@ static int ssb_devices_register(struct s
+
+ devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+ if (!devwrap) {
+- ssb_printk(KERN_ERR PFX
+- "Could not allocate device\n");
++ ssb_err("Could not allocate device\n");
+ err = -ENOMEM;
+ goto error;
+ }
+@@ -538,9 +551,7 @@ static int ssb_devices_register(struct s
+ sdev->dev = dev;
+ err = device_register(dev);
+ if (err) {
+- ssb_printk(KERN_ERR PFX
+- "Could not register %s\n",
+- dev_name(dev));
++ ssb_err("Could not register %s\n", dev_name(dev));
+ /* Set dev to NULL to not unregister
+ * dev on error unwinding. */
+ sdev->dev = NULL;
+@@ -550,6 +561,22 @@ static int ssb_devices_register(struct s
+ dev_idx++;
+ }
+
++#ifdef CONFIG_SSB_DRIVER_MIPS
++ if (bus->mipscore.pflash.present) {
++ err = platform_device_register(&ssb_pflash_dev);
++ if (err)
++ pr_err("Error registering parallel flash\n");
++ }
++#endif
++
++#ifdef CONFIG_SSB_SFLASH
++ if (bus->mipscore.sflash.present) {
++ err = platform_device_register(&ssb_sflash_dev);
++ if (err)
++ pr_err("Error registering serial flash\n");
++ }
++#endif
++
+ return 0;
+ error:
+ /* Unwind the already registered devices. */
+@@ -577,6 +604,8 @@ static int __devinit ssb_attach_queued_b
if (err)
goto error;
ssb_pcicore_init(&bus->pcicore);
ssb_bus_may_powerdown(bus);
err = ssb_devices_register(bus);
-@@ -812,7 +804,14 @@ static int __devinit ssb_bus_register(st
+@@ -812,7 +841,13 @@ static int __devinit ssb_bus_register(st
if (err)
goto err_pcmcia_exit;
ssb_chipcommon_init(&bus->chipco);
ssb_mipscore_init(&bus->mipscore);
+ err = ssb_gpio_init(bus);
+ if (err == -ENOTSUPP)
-+ ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
++ ssb_dbg("GPIO driver not activated\n");
+ else if (err)
-+ ssb_dprintk(KERN_ERR PFX
-+ "Error registering GPIO driver: %i\n", err);
++ ssb_dbg("Error registering GPIO driver: %i\n", err);
err = ssb_fetch_invariants(bus, get_invariants);
if (err) {
ssb_bus_may_powerdown(bus);
-@@ -1094,6 +1093,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+@@ -863,11 +898,11 @@ int __devinit ssb_bus_pcibus_register(st
+
+ err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCI device %s\n", dev_name(&host_pci->dev));
++ ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
++ dev_name(&host_pci->dev));
+ } else {
+- ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+- " of SSB with error %d\n", err);
++ ssb_err("Failed to register PCI version of SSB with error %d\n",
++ err);
+ }
+
+ return err;
+@@ -888,8 +923,8 @@ int __devinit ssb_bus_pcmciabus_register
+
+ err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCMCIA device %s\n", pcmcia_dev->devname);
++ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
++ pcmcia_dev->devname);
+ }
+
+ return err;
+@@ -911,8 +946,8 @@ int __devinit ssb_bus_sdiobus_register(s
+
+ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "SDIO device %s\n", sdio_func_id(func));
++ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
++ sdio_func_id(func));
+ }
+
+ return err;
+@@ -931,8 +966,8 @@ int __devinit ssb_bus_ssbbus_register(st
+
+ err = ssb_bus_register(bus, get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
+- "address 0x%08lX\n", baseaddr);
++ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
++ baseaddr);
+ }
+
+ return err;
+@@ -1094,6 +1129,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
u32 plltype;
u32 clkctl_n, clkctl_m;
if (ssb_extif_available(&bus->extif))
ssb_extif_get_clockcontrol(&bus->extif, &plltype,
&clkctl_n, &clkctl_m);
-@@ -1131,8 +1133,7 @@ static u32 ssb_tmslow_reject_bitmask(str
+@@ -1131,8 +1169,7 @@ static u32 ssb_tmslow_reject_bitmask(str
case SSB_IDLOW_SSBREV_27: /* same here */
return SSB_TMSLOW_REJECT; /* this is a guess */
default:
}
return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
}
+@@ -1324,7 +1361,7 @@ out:
+ #endif
+ return err;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
++ ssb_err("Bus powerdown failed\n");
+ goto out;
+ }
+ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1347,7 +1384,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
++ ssb_err("Bus powerup failed\n");
+ return err;
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+@@ -1455,15 +1492,13 @@ static int __init ssb_modinit(void)
+
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+- "initialization failed\n");
++ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+ err = ssb_gige_init();
+ if (err) {
+- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+- "driver initialization failed\n");
++ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
-@@ -178,6 +178,18 @@ err_pci:
+@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
+ }
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return -ENODEV;
+ }
+
+@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
+ unsigned long flags;
+
+ #if SSB_VERBOSE_PCICORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ spin_lock_irqsave(&bus->bar_lock, flags);
+@@ -178,6 +177,18 @@ err_pci:
#define SPEX(_outvar, _offset, _mask, _shift) \
SPEX16(_outvar, _offset, _mask, _shift)
static inline u8 ssb_crc8(u8 crc, u8 data)
{
-@@ -327,11 +339,25 @@ static s8 r123_extract_antgain(u8 sprom_
+@@ -219,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
+ return t[crc ^ data];
+ }
+
++static void sprom_get_mac(char *mac, const u16 *in)
++{
++ int i;
++ for (i = 0; i < 3; i++) {
++ *mac++ = in[i] >> 8;
++ *mac++ = in[i];
++ }
++}
++
+ static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
+ {
+ int word;
+@@ -266,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
+ u32 spromctl;
+ u16 size = bus->sprom_size;
+
+- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+ if (err)
+ goto err_ctlreg;
+@@ -274,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
+ err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+ if (err)
+ goto err_ctlreg;
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ mmiowb();
+ msleep(20);
+@@ -297,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
+ if (err)
+ goto err_ctlreg;
+ msleep(500);
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+
+ return 0;
+ err_ctlreg:
+- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
++ ssb_err("Could not access SPROM control register.\n");
+ return err;
+ }
+
+@@ -327,11 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
return (s8)gain;
}
+
static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
{
- int i;
- u16 v;
+- int i;
+- u16 v;
- s8 gain;
u16 loc[3];
if (out->revision == 3) /* rev 3 moved MAC */
-@@ -361,8 +387,9 @@ static void sprom_extract_r123(struct ss
+@@ -341,19 +373,10 @@ static void sprom_extract_r123(struct ss
+ loc[1] = SSB_SPROM1_ET0MAC;
+ loc[2] = SSB_SPROM1_ET1MAC;
+ }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[0]) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
+ if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[1]) + i];
+- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
+- }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[2]) + i];
+- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
++ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
+ }
+ SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
+@@ -361,8 +384,10 @@ static void sprom_extract_r123(struct ss
SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
- SSB_SPROM1_BINF_CCODE_SHIFT);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 1)
+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ SSB_SPROM1_BINF_CCODE_SHIFT);
SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
SSB_SPROM1_BINF_ANTA_SHIFT);
SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
-@@ -386,24 +413,19 @@ static void sprom_extract_r123(struct ss
+@@ -386,24 +411,19 @@ static void sprom_extract_r123(struct ss
SSB_SPROM1_ITSSI_A_SHIFT);
SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
}
/* Revs 4 5 and 8 have partially shared layout */
-@@ -464,14 +486,17 @@ static void sprom_extract_r45(struct ssb
+@@ -448,30 +468,30 @@ static void sprom_extract_r458(struct ss
+
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 il0mac_offset;
+
+ if (out->revision == 4)
+ il0mac_offset = SSB_SPROM4_IL0MAC;
+ else
+ il0mac_offset = SSB_SPROM5_IL0MAC;
+- /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(il0mac_offset) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++
++ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
++
SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
if (out->revision == 4) {
- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
-@@ -504,16 +529,14 @@ static void sprom_extract_r45(struct ssb
+@@ -504,16 +524,14 @@ static void sprom_extract_r45(struct ssb
}
/* Extract the antenna gain values. */
sprom_extract_r458(out, in);
-@@ -523,14 +546,22 @@ static void sprom_extract_r45(struct ssb
+@@ -523,14 +541,21 @@ static void sprom_extract_r45(struct ssb
static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
{
int i;
- u16 v;
-+ u16 v, o;
++ u16 o;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+ ARRAY_SIZE(out->core_pwr_info));
/* extract the MAC address */
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
- }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
++ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
++
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
-@@ -596,16 +627,46 @@ static void sprom_extract_r8(struct ssb_
+@@ -596,16 +621,46 @@ static void sprom_extract_r8(struct ssb_
SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
/* Extract the antenna gain values. */
/* Extract FEM info */
SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
-@@ -630,6 +691,63 @@ static void sprom_extract_r8(struct ssb_
+@@ -630,6 +685,63 @@ static void sprom_extract_r8(struct ssb_
SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
sprom_extract_r458(out, in);
/* TODO - get remaining rev 8 stuff needed */
-@@ -759,7 +877,6 @@ static void ssb_pci_get_boardinfo(struct
+@@ -641,7 +753,7 @@ static int sprom_extract(struct ssb_bus
+ memset(out, 0, sizeof(*out));
+
+ out->revision = in[size - 1] & 0x00FF;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
++ ssb_dbg("SPROM revision %d detected\n", out->revision);
+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
+ memset(out->et1mac, 0xFF, 6);
+
+@@ -650,7 +762,7 @@ static int sprom_extract(struct ssb_bus
+ * number stored in the SPROM.
+ * Always extract r1. */
+ out->revision = 1;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++ ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ }
+
+ switch (out->revision) {
+@@ -667,9 +779,8 @@ static int sprom_extract(struct ssb_bus
+ sprom_extract_r8(out, in);
+ break;
+ default:
+- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+- " revision %d detected. Will extract"
+- " v1\n", out->revision);
++ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++ out->revision);
+ out->revision = 1;
+ sprom_extract_r123(out, in);
+ }
+@@ -689,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ u16 *buf;
+
+ if (!ssb_is_sprom_available(bus)) {
+- ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++ ssb_err("No SPROM available!\n");
+ return -ENODEV;
+ }
+ if (bus->chipco.dev) { /* can be unavailable! */
+@@ -708,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ } else {
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ }
+- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
++ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+
+ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ if (!buf)
+@@ -733,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+- ssb_printk(KERN_WARNING PFX "WARNING: Using"
+- " fallback SPROM failed (err %d)\n",
+- err);
++ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
++ err);
+ } else {
+- ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+- " revision %d provided by"
+- " platform.\n", sprom->revision);
++ ssb_dbg("Using SPROM revision %d provided by platform\n",
++ sprom->revision);
+ err = 0;
+ goto out_free;
+ }
+- ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
+- " SPROM CRC (corrupt SPROM)\n");
++ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ }
+ }
+ err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+@@ -759,7 +867,6 @@ static void ssb_pci_get_boardinfo(struct
{
bi->vendor = bus->host_pci->subsystem_vendor;
bi->type = bus->host_pci->subsystem_device;
}
int ssb_pci_get_invariants(struct ssb_bus *bus,
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+- pci_set_power_state(dev, 0);
++ pci_set_power_state(dev, PCI_D0);
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
-@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants(
+@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return err;
+ }
+
+@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
+ int err;
+
+ #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
+@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
++ ssb_err("Failed to switch pcmcia segment\n");
+ return err;
+ }
+
+@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
+ bool failed = 0;
+ size_t size = SSB_PCMCIA_SPROM_SIZE;
+
+- ssb_printk(KERN_NOTICE PFX
+- "Writing SPROM. Do NOT turn off the power! "
+- "Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not enable SPROM write access.\n");
++ ssb_notice("Could not enable SPROM write access\n");
+ return -EBUSY;
+ }
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Failed to write to SPROM.\n");
++ ssb_notice("Failed to write to SPROM\n");
+ failed = 1;
+ break;
+ }
+ }
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not disable SPROM write access.\n");
++ ssb_notice("Could not disable SPROM write access\n");
+ failed = 1;
+ }
+ msleep(500);
+ if (!failed) {
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+ }
+
+ return failed ? -EBUSY : 0;
+@@ -676,14 +670,10 @@ static int ssb_pcmcia_do_get_invariants(
case SSB_PCMCIA_CIS_ANTGAIN:
GOTO_ERROR_ON(tuple->TupleDataLen != 2,
"antg tpl size");
break;
case SSB_PCMCIA_CIS_BFLAGS:
GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
+@@ -704,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
+ return -ENOSPC; /* continue with next entry */
+
+ error:
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+@@ -726,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ ssb_pcmcia_get_mac, sprom);
+ if (res != 0) {
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch MAC address\n");
+ return -ENODEV;
+ }
+@@ -737,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ if ((res == 0) || (res == -ENOSPC))
+ return 0;
+
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants\n");
+ return -ENODEV;
+ }
+@@ -847,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
++ ssb_err("Failed to initialize PCMCIA host device\n");
+ return err;
+ }
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -90,6 +90,8 @@ const char *ssb_core_name(u16 coreid)
}
return "UNKNOWN";
}
-@@ -318,6 +320,9 @@ int ssb_bus_scan(struct ssb_bus *bus,
+@@ -123,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
+ chipid_fallback = 0x4401;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "PCI-ID not in fallback list\n");
++ ssb_err("PCI-ID not in fallback list\n");
+ }
+
+ return chipid_fallback;
+@@ -150,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ case 0x4704:
+ return 9;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "CHIPID not in nrcores fallback list\n");
++ ssb_err("CHIPID not in nrcores fallback list\n");
+ }
+
+ return 1;
+@@ -318,12 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
bus->chip_package = 0;
}
}
-+ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
-+ "package 0x%02X\n", bus->chip_id, bus->chip_rev,
-+ bus->chip_package);
++ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++ bus->chip_id, bus->chip_rev, bus->chip_package);
if (!bus->nr_devices)
bus->nr_devices = chipid_to_nrcores(bus->chip_id);
if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+- ssb_printk(KERN_ERR PFX
+- "More than %d ssb cores found (%d)\n",
+- SSB_MAX_NR_CORES, bus->nr_devices);
++ ssb_err("More than %d ssb cores found (%d)\n",
++ SSB_MAX_NR_CORES, bus->nr_devices);
+ goto err_unmap;
+ }
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+@@ -365,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ nr_80211_cores++;
+ if (nr_80211_cores > 1) {
+ if (!we_support_multiple_80211_cores(bus)) {
+- ssb_dprintk(KERN_INFO PFX "Ignoring additional "
+- "802.11 core\n");
++ ssb_dbg("Ignoring additional 802.11 core\n");
+ continue;
+ }
+ }
+@@ -374,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_EXTIF:
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ if (bus->extif.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple EXTIFs found\n");
++ ssb_warn("WARNING: Multiple EXTIFs found\n");
+ break;
+ }
+ bus->extif.dev = dev;
+@@ -383,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ break;
+ case SSB_DEV_CHIPCOMMON:
+ if (bus->chipco.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple ChipCommon found\n");
++ ssb_warn("WARNING: Multiple ChipCommon found\n");
+ break;
+ }
+ bus->chipco.dev = dev;
+@@ -393,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_MIPS_3302:
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple MIPS cores found\n");
++ ssb_warn("WARNING: Multiple MIPS cores found\n");
+ break;
+ }
+ bus->mipscore.dev = dev;
+@@ -415,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ }
+ }
+ if (bus->pcicore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple PCI(E) cores found\n");
++ ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ break;
+ }
+ bus->pcicore.dev = dev;
--- a/drivers/ssb/sdio.c
+++ b/drivers/ssb/sdio.c
@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b
break;
case SSB_SDIO_CIS_BFLAGS:
GOTO_ERROR_ON((tuple->size != 3) &&
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
+ while (cnt < sprom_size_words) {
+ memcpy(tmp, dump, 4);
+ dump += 4;
+- err = strict_strtoul(tmp, 16, &parsed);
++ err = kstrtoul(tmp, 16, &parsed);
+ if (err)
+ return err;
+ sprom[cnt++] = swab16((u16)parsed);
+@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ goto out_kfree;
+ err = ssb_devices_freeze(bus, &freeze);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
++ ssb_err("SPROM write: Could not freeze all devices\n");
+ goto out_unlock;
+ }
+ res = sprom_write(bus, sprom);
+ err = ssb_devices_thaw(&freeze);
+ if (err)
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
++ ssb_err("SPROM write: Could not thaw all devices\n");
+ out_unlock:
+ mutex_unlock(&bus->sprom_mutex);
+ out_kfree:
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
-@@ -3,6 +3,7 @@
+@@ -3,21 +3,33 @@
#include <linux/ssb/ssb.h>
#include <linux/types.h>
#define PFX "ssb: "
-@@ -207,4 +208,66 @@ static inline void b43_pci_ssb_bridge_ex
+
+ #ifdef CONFIG_SSB_SILENT
+-# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_printk(fmt, ...) \
++ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+ #else
+-# define ssb_printk printk
++# define ssb_printk(fmt, ...) \
++ printk(fmt, ##__VA_ARGS__)
+ #endif /* CONFIG_SSB_SILENT */
+
++#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
++#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
++#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
++#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
++#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
++#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
++
+ /* dprintk: Debugging printk; vanishes for non-debug compilation */
+ #ifdef CONFIG_SSB_DEBUG
+-# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x)
++# define ssb_dbg(fmt, ...) \
++ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
+ #else
+-# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_dbg(fmt, ...) \
++ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
+ #endif
+
+ #ifdef CONFIG_SSB_DEBUG
+@@ -207,4 +219,79 @@ static inline void b43_pci_ssb_bridge_ex
}
#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
+}
+#endif /* CONFIG_SSB_SFLASH */
+
++#ifdef CONFIG_SSB_DRIVER_MIPS
++extern struct platform_device ssb_pflash_dev;
++#endif
++
++#ifdef CONFIG_SSB_SFLASH
++extern struct platform_device ssb_sflash_dev;
++#endif
++
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
+extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+
+#ifdef CONFIG_SSB_DRIVER_GPIO
+extern int ssb_gpio_init(struct ssb_bus *bus);
++extern int ssb_gpio_unregister(struct ssb_bus *bus);
+#else /* CONFIG_SSB_DRIVER_GPIO */
+static inline int ssb_gpio_init(struct ssb_bus *bus)
+{
+ return -ENOTSUPP;
+}
++static inline int ssb_gpio_unregister(struct ssb_bus *bus)
++{
++ return 0;
++}
+#endif /* CONFIG_SSB_DRIVER_GPIO */
+
#endif /* LINUX_SSB_PRIVATE_H_ */
#include <linux/ssb/ssb_regs.h>
-@@ -16,6 +18,12 @@ struct pcmcia_device;
+@@ -16,19 +18,28 @@ struct pcmcia_device;
struct ssb_bus;
struct ssb_driver;
+
struct ssb_sprom {
u8 revision;
- u8 il0mac[6]; /* MAC address for 802.11b/g */
-@@ -26,9 +34,12 @@ struct ssb_sprom {
+- u8 il0mac[6]; /* MAC address for 802.11b/g */
+- u8 et0mac[6]; /* MAC address for Ethernet */
+- u8 et1mac[6]; /* MAC address for 802.11a */
++ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
++ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
++ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
+ u8 et0phyaddr; /* MII address for enet0 */
+ u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
u16 board_rev; /* Board revision number from SPROM. */
/* Vendor-ID values */
#define SSB_VENDOR_BROADCOM 0x4243
-@@ -354,7 +434,11 @@ struct ssb_bus {
+@@ -260,13 +340,61 @@ enum ssb_bustype {
+ #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
+ #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
+ /* board_type */
++#define SSB_BOARD_BCM94301CB 0x0406
++#define SSB_BOARD_BCM94301MP 0x0407
++#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_BCM94309CB 0x040B
++#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BU4306 0x0416
+ #define SSB_BOARD_BCM94306MP 0x0418
+ #define SSB_BOARD_BCM4309G 0x0421
+ #define SSB_BOARD_BCM4306CB 0x0417
+-#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */
++#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */
++#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */
++#define SSB_BOARD_BU4704SD 0x042E /* with sdram */
++#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */
++#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */
++#define SSB_BOARD_BU4318 0x0447
++#define SSB_BOARD_CB4318 0x0448
++#define SSB_BOARD_MPG4318 0x0449
+ #define SSB_BOARD_MP4318 0x044A
+-#define SSB_BOARD_BU4306 0x0416
+-#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_SD4318 0x044B
++#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */
++#define SSB_BOARD_BCM94303MP 0x044E
++#define SSB_BOARD_BCM94306MPM 0x0450
++#define SSB_BOARD_BCM94306MPL 0x0453
++#define SSB_BOARD_PC4303 0x0454 /* pcmcia */
++#define SSB_BOARD_BCM94306MPLNA 0x0457
++#define SSB_BOARD_BCM94306MPH 0x045B
++#define SSB_BOARD_BCM94306PCIV 0x045C
++#define SSB_BOARD_BCM94318MPGH 0x0463
++#define SSB_BOARD_BU4311 0x0464
++#define SSB_BOARD_BCM94311MC 0x0465
++#define SSB_BOARD_BCM94311MCAG 0x0466
++/* 4321 boards */
++#define SSB_BOARD_BU4321 0x046B
++#define SSB_BOARD_BU4321E 0x047C
++#define SSB_BOARD_MP4321 0x046C
++#define SSB_BOARD_CB2_4321 0x046D
++#define SSB_BOARD_CB2_4321_AG 0x0066
++#define SSB_BOARD_MC4321 0x046E
++/* 4325 boards */
++#define SSB_BOARD_BCM94325DEVBU 0x0490
++#define SSB_BOARD_BCM94325BGABU 0x0491
++#define SSB_BOARD_BCM94325SDGWB 0x0492
++#define SSB_BOARD_BCM94325SDGMDL 0x04AA
++#define SSB_BOARD_BCM94325SDGMDL2 0x04C6
++#define SSB_BOARD_BCM94325SDGMDL3 0x04C9
++#define SSB_BOARD_BCM94325SDABGWBA 0x04E1
++/* 4322 boards */
++#define SSB_BOARD_BCM94322MC 0x04A4
++#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */
++#define SSB_BOARD_BCM94322HM 0x04B0
++#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */
++/* 4312 boards */
++#define SSB_BOARD_BU4312 0x048A
++#define SSB_BOARD_BCM4312MCGSG 0x04B5
+ /* chip_package */
+ #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
+ #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
+@@ -354,7 +482,11 @@ struct ssb_bus {
#ifdef CONFIG_SSB_EMBEDDED
/* Lock for GPIO register access. */
spinlock_t gpio_lock;
#include <linux/pci.h>
#include <linux/spinlock.h>
+@@ -96,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
+ return 0;
+ }
+
+-#ifdef CONFIG_BCM47XX
+-#include <asm/mach-bcm47xx/nvram.h>
+ /* Get the device MAC address */
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+-{
+- char buf[20];
+- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+- return;
+- nvram_parse_macaddr(buf, macaddr);
+-}
+-#else
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+ {
++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++ if (!dev)
++ return -ENODEV;
++
++ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
++ return 0;
+ }
+-#endif
+
+ extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev);
+@@ -174,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
+ {
+ return 0;
+ }
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++{
++ return -ENODEV;
++}
+
+ #endif /* CONFIG_SSB_DRIVER_GIGE */
+ #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
-@@ -13,6 +13,12 @@ struct ssb_serial_port {
+@@ -13,6 +13,24 @@ struct ssb_serial_port {
unsigned int reg_shift;
};
+ u32 window;
+ u32 window_size;
+};
++
++#ifdef CONFIG_SSB_SFLASH
++struct ssb_sflash {
++ bool present;
++ u32 window;
++ u32 blocksize;
++ u16 numblocks;
++ u32 size;
++
++ void *priv;
++};
++#endif
struct ssb_mipscore {
struct ssb_device *dev;
-@@ -20,9 +26,7 @@ struct ssb_mipscore {
+@@ -20,9 +38,10 @@ struct ssb_mipscore {
int nr_serial_ports;
struct ssb_serial_port serial_ports[4];
- u32 flash_window;
- u32 flash_window_size;
+ struct ssb_pflash pflash;
++#ifdef CONFIG_SSB_SFLASH
++ struct ssb_sflash sflash;
++#endif
};
extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
+@@ -41,6 +60,11 @@ void ssb_mipscore_init(struct ssb_mipsco
+ {
+ }
+
++static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
++{
++ return 0;
++}
++
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+
+ #endif /* LINUX_SSB_MIPSCORE_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -228,6 +228,7 @@
+@@ -172,6 +172,7 @@
+ #define SSB_SPROMSIZE_WORDS_R4 220
+ #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
++#define SSB_SPROMSIZE_WORDS_R10 230
+ #define SSB_SPROM_BASE1 0x1000
+ #define SSB_SPROM_BASE31 0x0800
+ #define SSB_SPROM_REVISION 0x007E
+@@ -228,6 +229,7 @@
#define SSB_SPROM1_AGAIN_BG_SHIFT 0
#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
#define SSB_SPROM1_AGAIN_A_SHIFT 8
/* SPROM Revision 2 (inherits from rev 1) */
#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
-@@ -267,6 +268,7 @@
+@@ -267,6 +269,7 @@
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
-@@ -287,11 +289,11 @@
+@@ -287,11 +290,11 @@
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM4_AGAIN0_SHIFT 0
-@@ -389,6 +391,11 @@
+@@ -389,6 +392,11 @@
#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM8_GPIOB_P3_SHIFT 8
#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
-@@ -404,6 +411,13 @@
+@@ -404,6 +412,13 @@
#define SSB_SPROM8_AGAIN2_SHIFT 0
#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
#define SSB_SPROM8_AGAIN3_SHIFT 8
#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
#define SSB_SPROM8_RSSISMF2G 0x000F
#define SSB_SPROM8_RSSISMC2G 0x00F0
-@@ -430,6 +444,7 @@
+@@ -430,6 +445,7 @@
#define SSB_SPROM8_TRI5GH_SHIFT 8
#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
#define SSB_SPROM8_FEM2G 0x00AE
-@@ -445,10 +460,71 @@
+@@ -445,10 +461,71 @@
#define SSB_SROM8_FEM_ANTSWLUT 0xF800
#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
#define SSB_SPROM8_THERMAL 0x00B2
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -473,12 +549,23 @@
+@@ -473,12 +550,23 @@
#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
#define SSB_SPROM8_PA1HIB1 0x00DA
#define SSB_SPROM8_PA1HIB2 0x00DC
+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(voi
+
+ p->mapbase = (unsigned int) bcma_port->regs;
+ p->membase = (void *) bcma_port->regs;
+- p->irq = bcma_port->irq + 2;
++ p->irq = bcma_port->irq;
+ p->uartclk = bcma_port->baud_base;
+ p->regshift = bcma_port->reg_shift;
+ p->iotype = UPIO_MEM;
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -29,7 +29,7 @@ config BCMA_HOST_PCI
+@@ -26,10 +26,11 @@ config BCMA_HOST_PCI_POSSIBLE
+ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
++ default y
config BCMA_DRIVER_PCI_HOSTMODE
bool "Driver for PCI core working in hostmode"
help
PCI core hostmode operation (external PCI bus).
-@@ -46,6 +46,33 @@ config BCMA_DRIVER_MIPS
+@@ -46,6 +47,33 @@ config BCMA_DRIVER_MIPS
If unsure, say N
obj-$(CONFIG_BCMA) += bcma.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -10,10 +10,19 @@
+@@ -10,10 +10,21 @@
#define BCMA_CORE_SIZE 0x1000
/* main.c */
-int bcma_bus_register(struct bcma_bus *bus);
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout);
+int __devinit bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
struct bcma_device *core_cc,
-@@ -22,6 +31,8 @@ int __init bcma_bus_early_register(struc
+@@ -22,6 +33,8 @@ int __init bcma_bus_early_register(struc
int bcma_bus_suspend(struct bcma_bus *bus);
int bcma_bus_resume(struct bcma_bus *bus);
#endif
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
-@@ -39,8 +50,32 @@ void bcma_chipco_serial_init(struct bcma
+@@ -36,11 +49,36 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ /* driver_chipcommon.c */
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_pflash_dev;
#endif /* CONFIG_BCMA_DRIVER_MIPS */
/* driver_chipcommon_pmu.c */
#ifdef CONFIG_BCMA_HOST_PCI
/* host_pci.c */
-@@ -48,8 +83,24 @@ extern int __init bcma_host_pci_init(voi
+@@ -48,8 +86,29 @@ extern int __init bcma_host_pci_init(voi
extern void __exit bcma_host_pci_exit(void);
#endif /* CONFIG_BCMA_HOST_PCI */
+#ifdef CONFIG_BCMA_DRIVER_GPIO
+/* driver_gpio.c */
+int bcma_gpio_init(struct bcma_drv_cc *cc);
++int bcma_gpio_unregister(struct bcma_drv_cc *cc);
+#else
+static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
+ return -ENOTSUPP;
+}
++static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return 0;
++}
+#endif /* CONFIG_BCMA_DRIVER_GPIO */
+
#endif
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
-@@ -30,6 +30,7 @@ void bcma_core_disable(struct bcma_devic
- udelay(10);
+@@ -9,6 +9,25 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_aread32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ bool bcma_core_is_enabled(struct bcma_device *core)
+ {
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+@@ -25,12 +44,15 @@ void bcma_core_disable(struct bcma_devic
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+- bcma_awrite32(core, BCMA_IOCTL, flags);
+- bcma_aread32(core, BCMA_IOCTL);
+- udelay(10);
++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(core, BCMA_RESET_CTL);
udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
}
EXPORT_SYMBOL_GPL(bcma_core_disable);
-@@ -64,7 +65,7 @@ void bcma_core_set_clockmode(struct bcma
+
+@@ -42,6 +64,7 @@ int bcma_core_enable(struct bcma_device
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+@@ -64,7 +87,7 @@ void bcma_core_set_clockmode(struct bcma
switch (clkmode) {
case BCMA_CLKMODE_FAST:
bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
for (i = 0; i < 1500; i++) {
if (bcma_read32(core, BCMA_CLKCTLST) &
BCMA_CLKCTLST_HAVEHT) {
-@@ -74,10 +75,10 @@ void bcma_core_set_clockmode(struct bcma
+@@ -74,10 +97,10 @@ void bcma_core_set_clockmode(struct bcma
udelay(10);
}
if (i)
break;
}
}
-@@ -101,9 +102,9 @@ void bcma_core_pll_ctl(struct bcma_devic
+@@ -101,9 +124,15 @@ void bcma_core_pll_ctl(struct bcma_devic
udelay(10);
}
if (i)
+ bcma_err(core->bus, "PLL enable timeout\n");
} else {
- pr_warn("Disabling PLL not supported yet!\n");
-+ bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
++ /*
++ * Mask the PLL but don't wait for it to be disabled. PLL may be
++ * shared between cores and will be still up if there is another
++ * core using it.
++ */
++ bcma_mask32(core, BCMA_CLKCTLST, ~req);
++ bcma_read32(core, BCMA_CLKCTLST);
}
}
EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
-@@ -119,8 +120,8 @@ u32 bcma_core_dma_translation(struct bcm
+@@ -119,8 +148,8 @@ u32 bcma_core_dma_translation(struct bcm
else
return BCMA_DMA_TRANSLATION_DMA32_CMT;
default:
#include <linux/bcma/bcma.h>
static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
-@@ -22,20 +25,120 @@ static inline u32 bcma_cc_write32_masked
+@@ -22,29 +25,136 @@ static inline u32 bcma_cc_write32_masked
return value;
}
+ bcma_core_chipcommon_early_init(cc);
+
if (cc->core->id.rev >= 20) {
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
-@@ -44,7 +147,7 @@ void bcma_core_chipcommon_init(struct bc
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ u32 pullup = 0, pulldown = 0;
++
++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
++ pullup = 0x402e0;
++ pulldown = 0x20500;
++ }
++
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
+ }
+
if (cc->capabilities & BCMA_CC_CAP_PMU)
bcma_pmu_init(cc);
if (cc->capabilities & BCMA_CC_CAP_PCTL)
if (cc->core->id.rev >= 16) {
if (cc->core->bus->sprom.leddc_on_time &&
-@@ -56,15 +159,33 @@ void bcma_core_chipcommon_init(struct bc
+@@ -56,15 +166,33 @@ void bcma_core_chipcommon_init(struct bc
((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
(leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
}
}
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
-@@ -84,28 +205,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+@@ -84,28 +212,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
}
#ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -118,8 +310,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -118,8 +317,7 @@ void bcma_chipco_serial_init(struct bcma
struct bcma_serial_port *ports = cc->serial_ports;
if (ccrev >= 11 && ccrev != 15) {
if (ccrev >= 21) {
/* Turn off UART clock before switching clocksource. */
bcma_cc_write32(cc, BCMA_CC_CORECTL,
-@@ -137,8 +328,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -137,12 +335,11 @@ void bcma_chipco_serial_init(struct bcma
| BCMA_CC_CORECTL_UARTCLKEN);
}
} else {
return;
}
+- irq = bcma_core_mips_irq(cc->core);
++ irq = bcma_core_irq(cc->core);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon_nflash.c
@@ -0,0 +1,44 @@
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include "bcma_private.h"
++
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
-+#include "bcma_private.h"
-+
+struct platform_device bcma_nflash_dev = {
+ .name = "bcma_nflash",
+ .num_resources = 0,
+ struct bcma_bus *bus = cc->core->bus;
+
+ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
-+ cc->core->id.rev != 0x38) {
++ cc->core->id.rev != 38) {
+ bcma_err(bus, "NAND flash on unsupported board!\n");
+ return -ENOTSUPP;
+ }
void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
{
-@@ -54,38 +56,19 @@ void bcma_chipco_regctl_maskset(struct b
+@@ -54,19 +56,106 @@ void bcma_chipco_regctl_maskset(struct b
}
EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
--static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
--{
-- struct bcma_bus *bus = cc->core->bus;
--
-- switch (bus->chipinfo.id) {
++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
++{
++ u32 ilp_ctl, alp_hz;
++
++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
++ return 0;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++ usleep_range(1000, 2000);
++
++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++
++ alp_hz = ilp_ctl * 32768 / 4;
++ return (alp_hz + 50000) / 100000 * 100;
++}
++
++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 freq_tgt_target = 0, freq_tgt_current;
++ u32 pll0, mask;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ /* pmu2_xtaltab0_adfll_485 */
++ switch (xtalfreq) {
++ case 12000:
++ freq_tgt_target = 0x50D52;
++ break;
++ case 20000:
++ freq_tgt_target = 0x307FE;
++ break;
++ case 26000:
++ freq_tgt_target = 0x254EA;
++ break;
++ case 37400:
++ freq_tgt_target = 0x19EF8;
++ break;
++ case 52000:
++ freq_tgt_target = 0x12A75;
++ break;
++ }
++ break;
++ }
++
++ if (!freq_tgt_target) {
++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
++ xtalfreq);
++ return;
++ }
++
++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++
++ if (freq_tgt_current == freq_tgt_target) {
++ bcma_debug(bus, "Target TGT frequency already set\n");
++ return;
++ }
++
++ /* Turn off PLL */
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
++ BCMA_RES_4314_MACPHY_CLK_AVAIL);
++
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++ bcma_wait_value(cc->core, BCMA_CLKCTLST,
++ BCMA_CLKCTLST_HAVEHT, 0, 20000);
++ break;
++ }
++
++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
++
++ /* Flush */
++ if (cc->pmu.rev >= 2)
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++
++ /* TODO: Do we need to update OTP? */
++}
++
+ static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
++ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
+
+ switch (bus->chipinfo.id) {
- case 0x4313:
- case 0x4331:
- case 43224:
- case 43225:
-- break;
++ case BCMA_CHIP_ID_BCM43142:
++ if (xtalfreq == 0)
++ xtalfreq = 20000;
++ bcma_pmu2_pll_init0(cc, xtalfreq);
+ break;
- default:
- pr_err("PLL init unknown for device 0x%04X\n",
- bus->chipinfo.id);
-- }
--}
--
- static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
- {
- struct bcma_bus *bus = cc->core->bus;
+ }
+ }
+
+@@ -76,16 +165,32 @@ static void bcma_pmu_resources_init(stru
u32 min_msk = 0, max_msk = 0;
switch (bus->chipinfo.id) {
break;
- case 43224:
- case 43225:
-- break;
++ case BCMA_CHIP_ID_BCM43142:
++ min_msk = BCMA_RES_4314_LPLDO_PU |
++ BCMA_RES_4314_PMU_SLEEP_DIS |
++ BCMA_RES_4314_PMU_BG_PU |
++ BCMA_RES_4314_CBUCK_LPOM_PU |
++ BCMA_RES_4314_CBUCK_PFM_PU |
++ BCMA_RES_4314_CLDO_PU |
++ BCMA_RES_4314_LPLDO2_LVM |
++ BCMA_RES_4314_WL_PMU_PU |
++ BCMA_RES_4314_LDO3P3_PU |
++ BCMA_RES_4314_OTP_PU |
++ BCMA_RES_4314_WL_PWRSW_PU |
++ BCMA_RES_4314_LQ_AVAIL |
++ BCMA_RES_4314_LOGIC_RET |
++ BCMA_RES_4314_MEM_SLEEP |
++ BCMA_RES_4314_MACPHY_RET |
++ BCMA_RES_4314_WL_CORE_READY;
++ max_msk = 0x3FFFFFFF;
+ break;
default:
- pr_err("PMU resource config unknown for device 0x%04X\n",
- bus->chipinfo.id);
}
/* Set the resource masks. */
-@@ -93,22 +76,12 @@ static void bcma_pmu_resources_init(stru
+@@ -93,22 +198,12 @@ static void bcma_pmu_resources_init(stru
bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
if (max_msk)
bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
-}
--
+
-void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
-{
- struct bcma_bus *bus = cc->core->bus;
-
+-
- switch (bus->chipinfo.id) {
- case 0x4313:
- case 0x4331:
}
/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
-@@ -122,51 +95,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -122,51 +217,69 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
val |= BCMA_CHIPCTL_4331_EXTPA_EN;
if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
if (cc->pmu.rev == 1)
bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
~BCMA_CC_PMU_CTL_NOILPONW);
-@@ -174,37 +165,47 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -174,37 +287,48 @@ void bcma_pmu_init(struct bcma_drv_cc *c
bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
BCMA_CC_PMU_CTL_NOILPONW);
- if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
- pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
-
-- bcma_pmu_pll_init(cc);
+ bcma_pmu_pll_init(cc);
bcma_pmu_resources_init(cc);
- bcma_pmu_swreg_init(cc);
bcma_pmu_workarounds(cc);
}
return BCMA_CC_PMU_ALP_CLOCK;
}
-@@ -212,7 +213,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+@@ -212,7 +336,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
/* Find the output of the "m" pll divider given pll controls that start with
* pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
*/
{
u32 tmp, div, ndiv, p1, p2, fc;
struct bcma_bus *bus = cc->core->bus;
-@@ -221,7 +222,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -221,7 +345,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
BUG_ON(!m || m > 4);
/* Detect failure in clock setting */
tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
if (tmp & 0x40000)
-@@ -240,60 +242,95 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -240,60 +365,96 @@ static u32 bcma_pmu_clock(struct bcma_dr
ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
/* Do calculation in Mhz */
+
/* query bus clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
-+static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
}
return BCMA_CC_PMU_HT_CLOCK;
}
++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
/* query cpu clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
break;
default:
-@@ -301,10 +338,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -301,10 +462,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
break;
}
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include "bcma_private.h"
++
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
-+#include "bcma_private.h"
-+
+static struct resource bcma_sflash_resource = {
+ .name = "bcma_sflash",
+ .start = BCMA_SOC_FLASH2,
+ u16 numblocks;
+};
+
-+static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+ { 0 },
+};
+
-+static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+ { 0 },
+};
+
-+static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+{
+ struct bcma_bus *bus = cc->core->bus;
+ struct bcma_sflash *sflash = &cc->sflash;
-+ struct bcma_sflash_tbl_e *e;
++ const struct bcma_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+}
--- /dev/null
+++ b/drivers/bcma/driver_gpio.c
-@@ -0,0 +1,98 @@
+@@ -0,0 +1,114 @@
+/*
+ * Broadcom specific AMBA
+ * GPIO driver
+ bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
+}
+
++static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++ return bcma_core_irq(cc->core);
++ else
++ return -EINVAL;
++}
++
+int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
+ struct gpio_chip *chip = &cc->gpio;
+ chip->set = bcma_gpio_set_value;
+ chip->direction_input = bcma_gpio_direction_input;
+ chip->direction_output = bcma_gpio_direction_output;
++ chip->to_irq = bcma_gpio_to_irq;
+ chip->ngpio = 16;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+
+ return gpiochip_add(chip);
+}
++
++int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return gpiochip_remove(&cc->gpio);
++}
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
-@@ -22,15 +22,15 @@
+@@ -14,23 +14,45 @@
+
+ #include <linux/bcma/bcma.h>
+
++#include <linux/mtd/physmap.h>
++#include <linux/platform_device.h>
+ #include <linux/serial.h>
+ #include <linux/serial_core.h>
+ #include <linux/serial_reg.h>
+ #include <linux/time.h>
+
++static const char * const part_probes[] = { "bcm47xxpart", NULL };
++
++static struct physmap_flash_data bcma_pflash_data = {
++ .part_probe_types = part_probes,
++};
++
++static struct resource bcma_pflash_resource = {
++ .name = "bcma_pflash",
++ .flags = IORESOURCE_MEM,
++};
++
++struct platform_device bcma_pflash_dev = {
++ .name = "physmap-flash",
++ .dev = {
++ .platform_data = &bcma_pflash_data,
++ },
++ .resource = &bcma_pflash_resource,
++ .num_resources = 1,
++};
++
/* The 47162a0 hangs when reading MIPS DMP registers registers */
static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
{
dev->bus->chipinfo.pkg == 11 &&
dev->id.id == BCMA_CORE_USB20_HOST;
}
-@@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct
+@@ -74,28 +96,41 @@ static u32 bcma_core_mips_irqflag(struct
return dev->core_index;
flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
*/
- unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+-unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
{
-@@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct b
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
unsigned int irq;
irqflag = bcma_core_mips_irqflag(dev);
- return 0;
+ return 5;
++}
++
++unsigned int bcma_core_irq(struct bcma_device *dev)
++{
++ unsigned int mips_irq = bcma_core_mips_irq(dev);
++ return mips_irq <= 4 ? mips_irq + 2 : 0;
}
- EXPORT_SYMBOL(bcma_core_mips_irq);
+-EXPORT_SYMBOL(bcma_core_mips_irq);
++EXPORT_SYMBOL(bcma_core_irq);
-@@ -114,8 +121,8 @@ static void bcma_core_mips_set_irq(struc
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+@@ -114,8 +149,8 @@ static void bcma_core_mips_set_irq(struc
bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
~(1 << irqflag));
/* assign the new one */
if (irq == 0) {
-@@ -123,17 +130,17 @@ static void bcma_core_mips_set_irq(struc
+@@ -123,17 +158,17 @@ static void bcma_core_mips_set_irq(struc
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
(1 << irqflag));
} else {
bcma_core_mips_set_irq(core, 0);
break;
}
-@@ -143,15 +150,31 @@ static void bcma_core_mips_set_irq(struc
+@@ -143,15 +178,31 @@ static void bcma_core_mips_set_irq(struc
1 << irqflag);
}
for (i = 0; i <= 6; i++)
printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
printk("\n");
-@@ -161,7 +184,7 @@ static void bcma_core_mips_dump_irq(stru
+@@ -161,7 +212,7 @@ static void bcma_core_mips_dump_irq(stru
{
struct bcma_device *core;
bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
}
}
-@@ -171,9 +194,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -171,9 +222,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
struct bcma_bus *bus = mcore->core->bus;
if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
return 0;
}
EXPORT_SYMBOL(bcma_cpu_clock);
-@@ -181,76 +204,109 @@ EXPORT_SYMBOL(bcma_cpu_clock);
+@@ -181,25 +232,81 @@ EXPORT_SYMBOL(bcma_cpu_clock);
static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
{
struct bcma_bus *bus = mcore->core->bus;
+ struct bcma_drv_cc *cc = &bus->drv_cc;
++ struct bcma_pflash *pflash = &cc->pflash;
- switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
- bus->drv_cc.pflash.window = 0x1c000000;
- bus->drv_cc.pflash.window_size = 0x02000000;
+ bcma_debug(bus, "Found parallel flash\n");
-+ cc->pflash.present = true;
-+ cc->pflash.window = BCMA_SOC_FLASH2;
-+ cc->pflash.window_size = BCMA_SOC_FLASH2_SZ;
++ pflash->present = true;
++ pflash->window = BCMA_SOC_FLASH2;
++ pflash->window_size = BCMA_SOC_FLASH2_SZ;
- if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
+ if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
BCMA_CC_FLASH_CFG_DS) == 0)
- bus->drv_cc.pflash.buswidth = 1;
-+ cc->pflash.buswidth = 1;
++ pflash->buswidth = 1;
else
- bus->drv_cc.pflash.buswidth = 2;
-+ cc->pflash.buswidth = 2;
++ pflash->buswidth = 2;
++
++ bcma_pflash_data.width = pflash->buswidth;
++ bcma_pflash_resource.start = pflash->window;
++ bcma_pflash_resource.end = pflash->window + pflash->window_size;
++
break;
default:
- pr_err("flash not supported.\n");
+ bcma_debug(bus, "Found NAND flash\n");
+ bcma_nflash_init(cc);
+ }
- }
- }
-
++ }
++}
++
+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+{
+ struct bcma_bus *bus = mcore->core->bus;
+ mcore->early_setup_done = true;
+}
+
- void bcma_core_mips_init(struct bcma_drv_mips *mcore)
- {
- struct bcma_bus *bus;
++static void bcma_fix_i2s_irqflag(struct bcma_bus *bus)
++{
++ struct bcma_device *cpu, *pcie, *i2s;
++
++ /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK)
++ * (IRQ flags > 7 are ignored when setting the interrupt masks)
++ */
++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 &&
++ bus->chipinfo.id != BCMA_CHIP_ID_BCM4748)
++ return;
++
++ cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ pcie = bcma_find_core(bus, BCMA_CORE_PCIE);
++ i2s = bcma_find_core(bus, BCMA_CORE_I2S);
++ if (cpu && pcie && i2s &&
++ bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) {
++ bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87);
++ bcma_debug(bus,
++ "Moved i2s interrupt to oob line 7 instead of 8\n");
+ }
+ }
+
+@@ -209,48 +316,59 @@ void bcma_core_mips_init(struct bcma_drv
struct bcma_device *core;
bus = mcore->core->bus;
- pr_info("Initializing MIPS core...\n");
+ if (mcore->setup_done)
+ return;
-+
-+ bcma_debug(bus, "Initializing MIPS core...\n");
- if (!mcore->setup_done)
- mcore->assigned_irqs = 1;
-+ bcma_core_mips_early_init(mcore);
++ bcma_debug(bus, "Initializing MIPS core...\n");
- /* Assign IRQs to all cores on the bus */
- list_for_each_entry_reverse(core, &bus->cores, list) {
- bcma_core_mips_set_irq(core,
- mcore->assigned_irqs++);
- break;
++ bcma_core_mips_early_init(mcore);
++
++ bcma_fix_i2s_irqflag(bus);
++
+ switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM4716:
+ case BCMA_CHIP_ID_BCM4748:
+ break;
+ default:
+ list_for_each_entry(core, &bus->cores, list) {
-+ core->irq = bcma_core_mips_irq(core) + 2;
++ core->irq = bcma_core_irq(core);
}
+ bcma_err(bus,
+ "Unknown device (0x%x) found, can not configure IRQs\n",
+EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer);
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
-@@ -2,13 +2,600 @@
+@@ -2,13 +2,616 @@
* Broadcom specific AMBA
* PCI Core in hostmode
*
+out:
+ return addr;
+}
-
--void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
++
+static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev,
+ unsigned int func, unsigned int off,
+ void *buf, int len)
- {
-- pr_err("No support for PCI core in hostmode yet\n");
++{
+ int err = -EINVAL;
+ u32 addr, val;
+ void __iomem *mmio = 0;
+ if (dev == 0) {
+ /* we support only two functions on device 0 */
+ if (func > 1)
-+ return -EINVAL;
++ goto out;
+
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
+ if (off >= PCI_CONFIG_SPACE_SIZE) {
+ addr = (func << 12);
-+ addr |= (off & 0x0FFF);
++ addr |= (off & 0x0FFC);
+ val = bcma_pcie_read_config(pc, addr);
+ } else {
+ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
-+ addr |= (off & 0xfc);
++ addr |= (off & 0xFC);
+ val = pcicore_read32(pc, addr);
+ }
+ } else {
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
-+ val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
-+
-+ val = readl(mmio);
+ }
+ val >>= (8 * (off & 3));
+
+out:
+ return err;
+}
-+
+
+-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
+static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev,
+ unsigned int func, unsigned int off,
+ const void *buf, int len)
-+{
+ {
+- pr_err("No support for PCI core in hostmode yet\n");
+ int err = -EINVAL;
-+ u32 addr = 0, val = 0;
++ u32 addr, val;
+ void __iomem *mmio = 0;
+ u16 chipid = pc->core->bus->chipinfo.id;
+
+ if (unlikely(len != 1 && len != 2 && len != 4))
+ goto out;
+ if (dev == 0) {
++ /* we support only two functions on device 0 */
++ if (func > 1)
++ goto out;
++
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
-+ if (off < PCI_CONFIG_SPACE_SIZE) {
-+ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
++ if (off >= PCI_CONFIG_SPACE_SIZE) {
++ addr = (func << 12);
++ addr |= (off & 0x0FFC);
++ val = bcma_pcie_read_config(pc, addr);
++ } else {
++ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
-+ addr |= (off & 0xfc);
-+ mmio = ioremap_nocache(addr, sizeof(val));
-+ if (!mmio)
-+ goto out;
++ addr |= (off & 0xFC);
++ val = pcicore_read32(pc, addr);
+ }
+ } else {
+ addr = bcma_get_cfgspace_addr(pc, dev, func, off);
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
-+ val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
+ }
+
+ switch (len) {
+ case 1:
-+ val = readl(mmio);
+ val &= ~(0xFF << (8 * (off & 3)));
+ val |= *((const u8 *)buf) << (8 * (off & 3));
+ break;
+ case 2:
-+ val = readl(mmio);
+ val &= ~(0xFFFF << (8 * (off & 3)));
+ val |= *((const u16 *)buf) << (8 * (off & 3));
+ break;
+ val = *((const u32 *)buf);
+ break;
+ }
-+ if (dev == 0 && !addr) {
++ if (dev == 0) {
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
-+ addr = (func << 12);
-+ addr |= (off & 0x0FFF);
-+ bcma_pcie_write_config(pc, addr, val);
++ if (off >= PCI_CONFIG_SPACE_SIZE)
++ bcma_pcie_write_config(pc, addr, val);
++ else
++ pcicore_write32(pc, addr, val);
+ } else {
+ writel(val, mmio);
+
+ /* check for Header type 0 */
+ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val,
+ sizeof(u8));
-+ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL)
++ if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL)
+ return cap_ptr;
+
+ /* check if the capability pointer field exists */
+ return;
+ }
+
++ spin_lock_init(&pc_host->cfgspace_lock);
++
+ pc->host_controller = pc_host;
+ pc_host->pci_controller.io_resource = &pc_host->io_resource;
+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
+ /* Reset RC */
+ usleep_range(3000, 5000);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
-+ usleep_range(1000, 2000);
++ msleep(50);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
+ BCMA_CORE_PCI_CTL_RST_OE);
+
+
+ bcma_core_pci_enable_crs(pc);
+
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) {
++ u16 val16;
++ bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ val16 |= (2 << 5); /* Max payload size of 512 */
++ val16 |= (2 << 12); /* MRRS 512 */
++ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ }
++
+ /* Enable PCI bridge BAR0 memory & master access */
+ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
+ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+ /* Fix up interrupt lines */
-+ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ dev->irq = bcma_core_irq(pc_host->pdev->core);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+ return 0;
+
+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ pci_ops);
-+ return bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ return bcma_core_irq(pc_host->pdev->core);
}
+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/host_pci.c
static int bcma_host_pci_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
-@@ -257,17 +261,20 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+@@ -257,17 +261,21 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
bcma_host_pci_resume);
#define BCMA_PM_OPS (&bcma_pm_ops)
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
{ 0, },
};
-@@ -277,7 +284,7 @@ static struct pci_driver bcma_pci_bridge
+@@ -277,7 +285,7 @@ static struct pci_driver bcma_pci_bridge
.name = "bcma-pci-bridge",
.id_table = bcma_pci_bridge_tbl,
.probe = bcma_host_pci_probe,
{
struct bcma_device *core;
-@@ -65,6 +79,19 @@ static struct bcma_device *bcma_find_cor
+@@ -65,6 +79,38 @@ static struct bcma_device *bcma_find_cor
}
return NULL;
}
+ return core;
+ }
+ return NULL;
++}
++
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
+}
static void bcma_release_core_dev(struct device *dev)
{
-@@ -84,16 +111,18 @@ static int bcma_register_cores(struct bc
+@@ -84,16 +130,23 @@ static int bcma_register_cores(struct bc
list_for_each_entry(core, &bus->cores, list) {
/* We support that cores ourself */
switch (core->id.id) {
continue;
}
++ /* Only first GMAC core on BCM4706 is connected and working */
++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++ core->core_unit > 0)
++ continue;
++
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
-@@ -111,41 +140,90 @@ static int bcma_register_cores(struct bc
+@@ -111,41 +164,98 @@ static int bcma_register_cores(struct bc
err = device_register(&core->dev);
if (err) {
dev_id++;
}
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++ if (bus->drv_cc.pflash.present) {
++ err = platform_device_register(&bcma_pflash_dev);
++ if (err)
++ bcma_err(bus, "Error registering parallel flash\n");
++ }
++#endif
++
+#ifdef CONFIG_BCMA_SFLASH
+ if (bus->drv_cc.sflash.present) {
+ err = platform_device_register(&bcma_sflash_dev);
if (core) {
bus->drv_cc.core = core;
bcma_core_chipcommon_init(&bus->drv_cc);
-@@ -159,30 +237,47 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -159,30 +269,54 @@ int bcma_bus_register(struct bcma_bus *b
}
/* Init PCIE core */
void bcma_bus_unregister(struct bcma_bus *bus)
{
+ struct bcma_device *cores[3];
++ int err;
++
++ err = bcma_gpio_unregister(&bus->drv_cc);
++ if (err == -EBUSY)
++ bcma_err(bus, "Some GPIOs are still in use.\n");
++ else if (err)
++ bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
+
+ cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+ cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
}
int __init bcma_bus_early_register(struct bcma_bus *bus,
-@@ -196,14 +291,14 @@ int __init bcma_bus_early_register(struc
+@@ -196,14 +330,14 @@ int __init bcma_bus_early_register(struc
bcma_init_bus(bus);
match.manuf = BCMA_MANUF_BCM;
return -1;
}
-@@ -215,25 +310,25 @@ int __init bcma_bus_early_register(struc
+@@ -215,25 +349,25 @@ int __init bcma_bus_early_register(struc
/* Scan for mips core */
err = bcma_bus_scan_early(bus, &match, core_mips);
if (err) {
return 0;
}
-@@ -259,8 +354,7 @@ int bcma_bus_resume(struct bcma_bus *bus
+@@ -259,8 +393,7 @@ int bcma_bus_resume(struct bcma_bus *bus
struct bcma_device *core;
/* Init CC core */
{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
-@@ -79,16 +86,41 @@ struct bcma_device_id_name bcma_device_n
+@@ -77,18 +84,45 @@ struct bcma_device_id_name bcma_device_n
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
{ BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_PCIE2, "PCIe Gen2" },
++ { BCMA_CORE_ARM_CR4, "ARM CR4" },
{ BCMA_CORE_DEFAULT, "Default" },
};
-const char *bcma_device_name(struct bcma_device_id *id)
return "UNKNOWN";
}
-@@ -212,6 +244,17 @@ static struct bcma_device *bcma_find_cor
+@@ -105,19 +139,19 @@ static void bcma_scan_switch_core(struct
+ addr);
+ }
+
+-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = readl(*eromptr);
+ (*eromptr)++;
+ return ent;
+ }
+
+-static void bcma_erom_push_ent(u32 **eromptr)
++static void bcma_erom_push_ent(u32 __iomem **eromptr)
+ {
+ (*eromptr)--;
+ }
+
+-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -127,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+ return ent;
+ }
+
+-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+ }
+
+-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+@@ -143,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b
+ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+ }
+
+-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent;
+ while (1) {
+@@ -157,7 +191,7 @@ static void bcma_erom_skip_component(str
+ bcma_erom_push_ent(eromptr);
+ }
+
+-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -167,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct
+ return ent;
+ }
+
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ u32 type, u8 port)
+ {
+ u32 addrl, addrh, sizel, sizeh = 0;
+@@ -212,6 +246,17 @@ static struct bcma_device *bcma_find_cor
return NULL;
}
static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
struct bcma_device_id *match, int core_num,
struct bcma_device *core)
-@@ -252,11 +295,15 @@ static int bcma_get_next_core(struct bcm
+@@ -252,11 +297,15 @@ static int bcma_get_next_core(struct bcm
/* check if component is a core at all */
if (wrappers[0] + wrappers[1] == 0) {
}
if (bcma_erom_is_bridge(bus, eromptr)) {
-@@ -286,6 +333,23 @@ static int bcma_get_next_core(struct bcm
+@@ -286,6 +335,23 @@ static int bcma_get_next_core(struct bcm
return -EILSEQ;
}
/* get & parse slave ports */
for (i = 0; i < ports[1]; i++) {
for (j = 0; ; j++) {
-@@ -298,7 +362,7 @@ static int bcma_get_next_core(struct bcm
+@@ -298,7 +364,7 @@ static int bcma_get_next_core(struct bcm
break;
} else {
if (i == 0 && j == 0)
}
}
}
-@@ -353,6 +417,7 @@ static int bcma_get_next_core(struct bcm
+@@ -353,6 +419,7 @@ static int bcma_get_next_core(struct bcm
void bcma_init_bus(struct bcma_bus *bus)
{
s32 tmp;
if (bus->init_done)
return;
-@@ -363,9 +428,12 @@ void bcma_init_bus(struct bcma_bus *bus)
+@@ -363,9 +430,12 @@ void bcma_init_bus(struct bcma_bus *bus)
bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
bus->init_done = true;
}
-@@ -392,9 +460,12 @@ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -392,9 +462,12 @@ int bcma_bus_scan(struct bcma_bus *bus)
bcma_scan_switch_core(bus, erombase);
while (eromptr < eromend) {
INIT_LIST_HEAD(&core->list);
core->bus = bus;
-@@ -409,25 +480,28 @@ int bcma_bus_scan(struct bcma_bus *bus)
+@@ -409,25 +482,28 @@ int bcma_bus_scan(struct bcma_bus *bus)
} else if (err == -ESPIPE) {
break;
}
}
int __init bcma_bus_scan_early(struct bcma_bus *bus,
-@@ -467,21 +541,21 @@ int __init bcma_bus_scan_early(struct bc
+@@ -467,21 +543,21 @@ int __init bcma_bus_scan_early(struct bc
else if (err == -ESPIPE)
break;
else if (err < 0)
* Licensed under the GNU/GPL. See COPYING for details.
*/
-@@ -14,7 +16,57 @@
+@@ -14,18 +16,68 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
/**************************************************
* R/W ops.
-@@ -124,10 +176,37 @@ static int bcma_sprom_valid(const u16 *s
+ **************************************************/
+
+-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
++ size_t words)
+ {
+ int i;
+- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+- sprom[i] = bcma_read16(bus->drv_cc.core,
+- offset + (i * 2));
++ for (i = 0; i < words; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
+ }
+
+ /**************************************************
+@@ -72,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
+ return t[crc ^ data];
+ }
+
+-static u8 bcma_sprom_crc(const u16 *sprom)
++static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
+ {
+ int word;
+ u8 crc = 0xFF;
+
+- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ for (word = 0; word < words - 1; word++) {
+ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+ }
+
+-static int bcma_sprom_check_crc(const u16 *sprom)
++static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
+ {
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+- crc = bcma_sprom_crc(sprom);
+- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ crc = bcma_sprom_crc(sprom, words);
++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+@@ -102,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
+ return 0;
+ }
+
+-static int bcma_sprom_valid(const u16 *sprom)
++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
++ size_t words)
+ {
+ u16 revision;
+ int err;
+
+- err = bcma_sprom_check_crc(sprom);
++ err = bcma_sprom_check_crc(sprom, words);
+ if (err)
+ return err;
+
+- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+- if (revision != 8 && revision != 9) {
++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9 && revision != 10) {
+ pr_err("Unsupported SPROM revision: %d\n", revision);
+ return -ENOENT;
+ }
+
++ bus->sprom.revision = revision;
++ bcma_debug(bus, "Found SPROM revision %d\n", revision);
++
+ return 0;
+ }
+
+@@ -124,124 +180,439 @@ static int bcma_sprom_valid(const u16 *s
* SPROM extraction.
**************************************************/
- u16 v;
+ u16 v, o;
int i;
+-
+- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+- SSB_SPROM_REVISION_REV;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(bus->sprom.core_pwr_info));
- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
- SSB_SPROM_REVISION_REV;
-@@ -137,107 +216,390 @@ static void bcma_sprom_extract_r8(struct
+ for (i = 0; i < 3; i++) {
+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
}
- bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)];
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
+
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ SSB_SPROM4_TXPID2G0_SHIFT);
+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
+ }
-
-- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
-- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
-- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
-- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
-- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
-- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
--
-- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
-- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
-- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
-- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
-- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
-- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
--
-- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
-- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
-- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
-- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
-- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
-- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
--
-- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
-- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
-- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
-- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
-- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
-- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
--
-- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
-- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
-- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
-- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
--
-- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
--
-- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
--
-- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
-- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
-- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
-- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
-- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
-- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
++
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS,
+ SSB_SROM8_FEM_TSSIPOS_SHIFT);
+ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN,
+ case BCMA_CHIP_ID_BCM4331:
+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
+ break;
-+
+
+- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
+- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
+- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
+- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
+-
+- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
+- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
+- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
+- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
+-
+- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
+- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
+- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
+- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
+-
+- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
+- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
+- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
+- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
+-
+- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
+- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
+- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
+- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
+-
+- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
+-
+- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+-
+- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+ default:
+ return true;
+ }
+ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
-+
++ case BCMA_CHIP_ID_BCM43142:
+ case BCMA_CHIP_ID_BCM43224:
+ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
- u16 offset;
+ u16 offset = BCMA_CC_SPROM;
u16 *sprom;
- int err = 0;
+- int err = 0;
++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
++ SSB_SPROMSIZE_WORDS_R10, };
++ int i, err = 0;
if (!bus->drv_cc.core)
return -EOPNOTSUPP;
- return -ENOENT;
+ if (!bcma_sprom_ext_available(bus)) {
+ bool sprom_onchip;
-+
+
+- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+- GFP_KERNEL);
+- if (!sprom)
+- return -ENOMEM;
+ /*
+ * External SPROM takes precedence so check
+ * on-chip OTP only when no external SPROM
+ }
+ }
- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
- GFP_KERNEL);
- if (!sprom)
- return -ENOMEM;
-
- if (bus->chipinfo.id == 0x4331)
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
- * TODO: understand this condition and use it */
- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
- BCMA_CC_SPROM_PCIE6;
+- bcma_sprom_read(bus, offset, sprom);
+ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
- bcma_sprom_read(bus, offset, sprom);
++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
++ size_t words = sprom_sizes[i];
++
++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, offset, sprom, words);
++ err = bcma_sprom_valid(bus, sprom, words);
++ if (!err)
++ break;
- if (bus->chipinfo.id == 0x4331)
+- bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
++ kfree(sprom);
++ }
+
+- err = bcma_sprom_valid(sprom);
+- if (err)
+- goto out;
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
- bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
- err = bcma_sprom_valid(sprom);
-- if (err)
+- bcma_sprom_extract_r8(bus, sprom);
+ if (err) {
-+ bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
- goto out;
++ } else {
++ bcma_sprom_extract_r8(bus, sprom);
++ kfree(sprom);
+ }
- bcma_sprom_extract_r8(bus, sprom);
-
+-out:
+- kfree(sprom);
+ return err;
+ }
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -7,9 +7,10 @@
#define BCMA_CORE_INVALID 0x700
#define BCMA_CORE_CHIPCOMMON 0x800
#define BCMA_CORE_ILINE20 0x801
-@@ -121,10 +134,46 @@ struct bcma_host_ops {
+@@ -121,10 +134,104 @@ struct bcma_host_ops {
#define BCMA_CORE_I2S 0x834
#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
-+#define BCMA_CORE_ARM_CR4 0x83e
++#define BCMA_CORE_PHY_AC 0x83B
++#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
++#define BCMA_CORE_USB30_DEV 0x83D
++#define BCMA_CORE_ARM_CR4 0x83E
#define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
+/* Chip IDs of PCIe devices */
+#define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43142 43142
+#define BCMA_CHIP_ID_BCM43224 43224
+#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
+#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
+#define BCMA_PKG_ID_BCM5357 11
+#define BCMA_CHIP_ID_BCM53572 53572
+#define BCMA_PKG_ID_BCM47188 9
++
++/* Board types (on PCI usually equals to the subsystem dev id) */
++/* BCM4313 */
++#define BCMA_BOARD_TYPE_BCM94313BU 0X050F
++#define BCMA_BOARD_TYPE_BCM94313HM 0X0510
++#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511
++#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C
++/* BCM4716 */
++#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD
++/* BCM43224 */
++#define BCMA_BOARD_TYPE_BCM943224X21 0X056E
++#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1
++#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9
++#define BCMA_BOARD_TYPE_BCM943224M93 0X008B
++#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090
++#define BCMA_BOARD_TYPE_BCM943224X16 0X0093
++#define BCMA_BOARD_TYPE_BCM94322X9 0X008D
++#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E
++/* BCM43228 */
++#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540
++#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541
++#define BCMA_BOARD_TYPE_BCM943228BU 0X0542
++#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543
++#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544
++#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545
++#define BCMA_BOARD_TYPE_BCM943228SD 0X0573
++/* BCM4331 */
++#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6
++#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC
++#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED
++#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5
++#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4
++#define BCMA_BOARD_TYPE_BCM94331BU 0X0523
++#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524
++#define BCMA_BOARD_TYPE_BCM94331MC 0X0525
++#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527
++#define BCMA_BOARD_TYPE_BCM94331HM 0X0574
++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B
++#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9
++#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6
++#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA
++/* BCM53572 */
++#define BCMA_BOARD_TYPE_BCM953572BU 0X058D
++#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E
++#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F
++#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590
++/* BCM43142 */
++#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0
+
struct bcma_device {
struct bcma_bus *bus;
struct bcma_device_id id;
-@@ -136,8 +185,10 @@ struct bcma_device {
+@@ -136,8 +243,10 @@ struct bcma_device {
bool dev_registered;
u8 core_index;
u32 wrap;
void __iomem *io_addr;
-@@ -175,6 +226,12 @@ int __bcma_driver_register(struct bcma_d
+@@ -175,6 +284,12 @@ int __bcma_driver_register(struct bcma_d
extern void bcma_driver_unregister(struct bcma_driver *drv);
struct bcma_bus {
/* The MMIO area. */
void __iomem *mmio;
-@@ -191,14 +248,18 @@ struct bcma_bus {
+@@ -191,14 +306,18 @@ struct bcma_bus {
struct bcma_chipinfo chipinfo;
/* We decided to share SPROM struct with SSB as long as we do not need
* any hacks for BCMA. This simplifies drivers code. */
-@@ -282,6 +343,7 @@ static inline void bcma_maskset16(struct
+@@ -282,6 +401,7 @@ static inline void bcma_maskset16(struct
bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
}
extern bool bcma_core_is_enabled(struct bcma_device *core);
extern void bcma_core_disable(struct bcma_device *core, u32 flags);
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
-@@ -289,6 +351,7 @@ extern void bcma_core_set_clockmode(stru
+@@ -289,6 +409,7 @@ extern void bcma_core_set_clockmode(stru
enum bcma_clkmode clkmode);
extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
bool on);
#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
-#define BCMA_CC_FLASHT_NFLASH 0x00000200
-+#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */
++#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */
#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
#define BCMA_PLLTYPE_NONE 0x00000000
#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
-@@ -240,7 +356,60 @@
+@@ -214,6 +330,8 @@
+ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
+ #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+@@ -239,8 +357,66 @@
+ #define BCMA_CC_REGCTL_DATA 0x065C
#define BCMA_CC_PLLCTL_ADDR 0x0660
#define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
-#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */
+/* NAND flash MLC controller registers (corerev >= 38) */
/* Divider allocation in 4716/47162/5356 */
#define BCMA_CC_PMU5_MAINPLL_CPU 1
-@@ -256,6 +425,15 @@
+@@ -256,6 +432,32 @@
/* 4706 PMU */
#define BCMA_CC_PMU4706_MAINPLL_PLL0 0
+#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3
+#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
+#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
++
++/* PMU rev 15 */
++#define BCMA_CC_PMU15_PLL_PLLCTL0 0
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
/* ALP clock on pre-PMU chips */
#define BCMA_CC_PMU_ALP_CLOCK 20000000
-@@ -284,6 +462,19 @@
+@@ -284,6 +486,19 @@
#define BCMA_CC_PPL_PCHI_OFF 5
#define BCMA_CC_PPL_PCHI_MASK 0x0000003f
/* BCM4331 ChipControl numbers. */
#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */
#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */
-@@ -297,9 +488,25 @@
+@@ -297,9 +512,56 @@
#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */
#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */
#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */
+#define BCMA_CHIPCTL_5357_NFLASH BIT(16)
+#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
+#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
++
++#define BCMA_RES_4314_LPLDO_PU BIT(0)
++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
++#define BCMA_RES_4314_PMU_BG_PU BIT(2)
++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
++#define BCMA_RES_4314_CLDO_PU BIT(5)
++#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
++#define BCMA_RES_4314_WL_PMU_PU BIT(7)
++#define BCMA_RES_4314_LNLDO_PU BIT(8)
++#define BCMA_RES_4314_LDO3P3_PU BIT(9)
++#define BCMA_RES_4314_OTP_PU BIT(10)
++#define BCMA_RES_4314_XTAL_PU BIT(11)
++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
++#define BCMA_RES_4314_LQ_AVAIL BIT(13)
++#define BCMA_RES_4314_LOGIC_RET BIT(14)
++#define BCMA_RES_4314_MEM_SLEEP BIT(15)
++#define BCMA_RES_4314_MACPHY_RET BIT(16)
++#define BCMA_RES_4314_WL_CORE_READY BIT(17)
++#define BCMA_RES_4314_ILP_REQ BIT(18)
++#define BCMA_RES_4314_ALP_AVAIL BIT(19)
++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
++#define BCMA_RES_4314_RADIO_PU BIT(23)
++#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
++#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
++#define BCMA_RES_4314_RX_LDO_PU BIT(26)
++#define BCMA_RES_4314_TX_LDO_PU BIT(27)
++#define BCMA_RES_4314_HT_AVAIL BIT(28)
++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
+
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
-@@ -310,11 +517,35 @@ struct bcma_chipcommon_pmu {
+@@ -310,11 +572,36 @@ struct bcma_chipcommon_pmu {
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash {
+ u32 size;
+
+ struct mtd_info *mtd;
++ void *priv;
+};
+#endif
+
struct bcma_serial_port {
void *regs;
unsigned long clockspeed;
-@@ -330,15 +561,30 @@ struct bcma_drv_cc {
+@@ -330,15 +617,30 @@ struct bcma_drv_cc {
u32 capabilities;
u32 capabilities_ext;
u8 setup_done:1;
};
/* Register access */
-@@ -355,14 +601,16 @@ struct bcma_drv_cc {
+@@ -355,14 +657,16 @@ struct bcma_drv_cc {
bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
-@@ -375,9 +623,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+@@ -375,9 +679,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
u32 value);
-@@ -387,5 +638,6 @@ extern void bcma_chipco_chipctl_maskset(
+@@ -387,5 +694,8 @@ extern void bcma_chipco_chipctl_maskset(
u32 offset, u32 mask, u32 set);
extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
u32 offset, u32 mask, u32 set);
+extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
++
++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
#endif /* LINUX_BCMA_DRIVER_CC_H_ */
--- /dev/null
+#endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -35,13 +35,15 @@ struct bcma_device;
+@@ -28,6 +28,7 @@
+ #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048
+ #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0
+
++#define BCMA_MIPS_OOBSELINA74 0x004
+ #define BCMA_MIPS_OOBSELOUTA30 0x100
+
+ struct bcma_device;
+@@ -35,17 +36,24 @@ struct bcma_device;
struct bcma_drv_mips {
struct bcma_device *core;
u8 setup_done:1;
#ifdef CONFIG_BCMA_DRIVER_MIPS
extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
++
++extern unsigned int bcma_core_irq(struct bcma_device *core);
#else
static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
++
++static inline unsigned int bcma_core_irq(struct bcma_device *core)
++{
++ return 0;
++}
#endif
extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
+-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+-
+ #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -53,11 +53,47 @@ struct pci_dev;
/* SBtoPCIx */
#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
-@@ -72,20 +108,118 @@ struct pci_dev;
+@@ -72,20 +108,120 @@ struct pci_dev;
#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
+#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */
+#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */
+
++#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8
++
+/* PCIE Root Capability Register bits (Host mode only) */
+#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001
+
ARRAY_SIZE(wgt634u_devices));
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
-@@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS
+@@ -136,10 +136,15 @@ config SSB_DRIVER_MIPS
If unsure, say N
# Assumption: We are on embedded, if we compile the MIPS core.
config SSB_EMBEDDED
bool
+- depends on SSB_DRIVER_MIPS
++ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ default y
+
+ config SSB_DRIVER_EXTIF
@@ -160,4 +165,12 @@ config SSB_DRIVER_GIGE
If unsure, say N
#include "ssb_private.h"
-@@ -280,10 +282,76 @@ static void calc_fast_powerup_delay(stru
+@@ -280,13 +282,79 @@ static void calc_fast_powerup_delay(stru
cc->fast_pwrup_delay = tmp;
}
+
if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++ ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
@@ -297,6 +365,11 @@ void ssb_chipcommon_init(struct ssb_chip
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
/* Turn off UART clock before switching clocksource. */
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -346,6 +346,8 @@ static void ssb_pmu_pll_init(struct ssb_
+@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set PDIV in PLL control 0. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set p1div and p2div. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
+@@ -346,10 +346,11 @@ static void ssb_pmu_pll_init(struct ssb_
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
}
break;
+ case 43222:
+ break;
default:
- ssb_printk(KERN_ERR PFX
- "ERROR: PLL init unknown for device %04X\n",
-@@ -434,6 +436,7 @@ static void ssb_pmu_resources_init(struc
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PLL init unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PLL init unknown for device %04X\n",
++ bus->chip_id);
+ }
+ }
+
+@@ -434,6 +435,7 @@ static void ssb_pmu_resources_init(struc
min_msk = 0xCBB;
break;
case 0x4322:
/* We keep the default settings:
* min_msk = 0xCBB
* max_msk = 0x7FFFF
-@@ -615,6 +618,33 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
+@@ -469,9 +471,8 @@ static void ssb_pmu_resources_init(struc
+ max_msk = 0xFFFFF;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU resource config unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU resource config unknown for device %04X\n",
++ bus->chip_id);
+ }
+
+ if (updown_tab) {
+@@ -523,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+
+- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+- cc->pmu.rev, pmucap);
++ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
++ cc->pmu.rev, pmucap);
+
+ if (cc->pmu.rev == 1)
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+@@ -615,6 +616,32 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
+ case 0x5354:
+ ssb_pmu_get_alp_clock_clk0(cc);
+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PMU alp clock unknown for device %04X\n",
-+ bus->chip_id);
++ ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+}
u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
{
struct ssb_bus *bus = cc->dev->bus;
-@@ -645,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+@@ -624,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi
+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ return 240000000;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU cpu clock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+ }
+@@ -639,9 +665,52 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ case 0x5354:
+ return 120000000;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU controlclock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
++ bus->chip_id);
return 0;
}
}
+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ break;
+ case 43222:
-+ /* TODO: BCM43222 requires updating PLLs too */
-+ return;
++ if (spuravoid == 1) {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
++ } else {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
++ }
++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -0,0 +1,18 @@
+@@ -0,0 +1,166 @@
+/*
+ * Sonics Silicon Backplane
+ * ChipCommon serial flash interface
+
+#include "ssb_private.h"
+
++static struct resource ssb_sflash_resource = {
++ .name = "ssb_sflash",
++ .start = SSB_FLASH2,
++ .end = 0,
++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device ssb_sflash_dev = {
++ .name = "ssb_sflash",
++ .resource = &ssb_sflash_resource,
++ .num_resources = 1,
++};
++
++struct ssb_sflash_tbl_e {
++ char *name;
++ u32 id;
++ u32 blocksize;
++ u16 numblocks;
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
++ { "M25P20", 0x11, 0x10000, 4, },
++ { "M25P40", 0x12, 0x10000, 8, },
++
++ { "M25P16", 0x14, 0x10000, 32, },
++ { "M25P32", 0x15, 0x10000, 64, },
++ { "M25P64", 0x16, 0x10000, 128, },
++ { "M25FL128", 0x17, 0x10000, 256, },
++ { 0 },
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
++ { "SST25WF512", 1, 0x1000, 16, },
++ { "SST25VF512", 0x48, 0x1000, 16, },
++ { "SST25WF010", 2, 0x1000, 32, },
++ { "SST25VF010", 0x49, 0x1000, 32, },
++ { "SST25WF020", 3, 0x1000, 64, },
++ { "SST25VF020", 0x43, 0x1000, 64, },
++ { "SST25WF040", 4, 0x1000, 128, },
++ { "SST25VF040", 0x44, 0x1000, 128, },
++ { "SST25VF040B", 0x8d, 0x1000, 128, },
++ { "SST25WF080", 5, 0x1000, 256, },
++ { "SST25VF080B", 0x8e, 0x1000, 256, },
++ { "SST25VF016", 0x41, 0x1000, 512, },
++ { "SST25VF032", 0x4a, 0x1000, 1024, },
++ { "SST25VF064", 0x4b, 0x1000, 2048, },
++ { 0 },
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
++ { "AT45DB011", 0xc, 256, 512, },
++ { "AT45DB021", 0x14, 256, 1024, },
++ { "AT45DB041", 0x1c, 256, 2048, },
++ { "AT45DB081", 0x24, 256, 4096, },
++ { "AT45DB161", 0x2c, 512, 4096, },
++ { "AT45DB321", 0x34, 512, 8192, },
++ { "AT45DB642", 0x3c, 1024, 8192, },
++ { 0 },
++};
++
++static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
++{
++ int i;
++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
++ SSB_CHIPCO_FLASHCTL_START | opcode);
++ for (i = 0; i < 1000; i++) {
++ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) &
++ SSB_CHIPCO_FLASHCTL_BUSY))
++ return;
++ cpu_relax();
++ }
++ pr_err("SFLASH control command failed (timeout)!\n");
++}
++
+/* Initialize serial flash access */
+int ssb_sflash_init(struct ssb_chipcommon *cc)
+{
++ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
++ const struct ssb_sflash_tbl_e *e;
++ u32 id, id2;
++
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
++
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++
++ switch (id) {
++ case 0xbf:
++ for (e = ssb_sflash_sst_tbl; e->name; e++) {
++ if (e->id == id2)
++ break;
++ }
++ break;
++ case 0x13:
++ return -ENOTSUPP;
++ default:
++ for (e = ssb_sflash_st_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ break;
++ }
++ if (!e->name) {
++ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n",
++ id, id2);
++ return -ENOTSUPP;
++ }
++
++ break;
++ case SSB_CHIPCO_FLASHT_ATSER:
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
++
++ for (e = ssb_sflash_at_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ if (!e->name) {
++ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n",
++ id);
++ return -ENOTSUPP;
++ }
++
++ break;
++ default:
++ pr_err("Unsupported flash type\n");
++ return -ENOTSUPP;
++ }
++
++ sflash->window = SSB_FLASH2;
++ sflash->blocksize = e->blocksize;
++ sflash->numblocks = e->numblocks;
++ sflash->size = sflash->blocksize * sflash->numblocks;
++ sflash->present = true;
++
++ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
++ e->name, e->blocksize, e->numblocks);
++
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
++ sflash->size;
++ ssb_sflash_dev.dev.platform_data = sflash;
++
+ pr_err("Serial flash support is not implemented yet!\n");
+
+ return -ENOTSUPP;
}
--- /dev/null
+++ b/drivers/ssb/driver_gpio.c
-@@ -0,0 +1,176 @@
+@@ -0,0 +1,210 @@
+/*
+ * Sonics Silicon Backplane
+ * GPIO driver
+ ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
+}
+
++static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ return ssb_mips_irq(bus->chipco.dev) + 2;
++ else
++ return -EINVAL;
++}
++
+static int ssb_gpio_chipco_init(struct ssb_bus *bus)
+{
+ struct gpio_chip *chip = &bus->gpio;
+ chip->set = ssb_gpio_chipco_set_value;
+ chip->direction_input = ssb_gpio_chipco_direction_input;
+ chip->direction_output = ssb_gpio_chipco_direction_output;
++ chip->to_irq = ssb_gpio_chipco_to_irq;
+ chip->ngpio = 16;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+ return 0;
+}
+
++static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ return ssb_mips_irq(bus->extif.dev) + 2;
++ else
++ return -EINVAL;
++}
++
+static int ssb_gpio_extif_init(struct ssb_bus *bus)
+{
+ struct gpio_chip *chip = &bus->gpio;
+ chip->set = ssb_gpio_extif_set_value;
+ chip->direction_input = ssb_gpio_extif_direction_input;
+ chip->direction_output = ssb_gpio_extif_direction_output;
++ chip->to_irq = ssb_gpio_extif_to_irq;
+ chip->ngpio = 5;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+
+ return -1;
+}
++
++int ssb_gpio_unregister(struct ssb_bus *bus)
++{
++ if (ssb_chipco_available(&bus->chipco) ||
++ ssb_extif_available(&bus->extif)) {
++ return gpiochip_remove(&bus->gpio);
++ } else {
++ SSB_WARN_ON(1);
++ }
++
++ return -1;
++}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
-@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
+@@ -10,6 +10,7 @@
+
+ #include <linux/ssb/ssb.h>
+
++#include <linux/mtd/physmap.h>
+ #include <linux/serial.h>
+ #include <linux/serial_core.h>
+ #include <linux/serial_reg.h>
+@@ -17,6 +18,25 @@
+
+ #include "ssb_private.h"
+
++static const char * const part_probes[] = { "bcm47xxpart", NULL };
++
++static struct physmap_flash_data ssb_pflash_data = {
++ .part_probe_types = part_probes,
++};
++
++static struct resource ssb_pflash_resource = {
++ .name = "ssb_pflash",
++ .flags = IORESOURCE_MEM,
++};
++
++struct platform_device ssb_pflash_dev = {
++ .name = "physmap-flash",
++ .dev = {
++ .platform_data = &ssb_pflash_data,
++ },
++ .resource = &ssb_pflash_resource,
++ .num_resources = 1,
++};
+
+ static inline u32 mips_read32(struct ssb_mipscore *mcore,
+ u16 offset)
+@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d
+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
+ ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ }
+- ssb_dprintk(KERN_INFO PFX
+- "set_irq: core 0x%04x, irq %d => %d\n",
+- dev->id.coreid, oldirq+2, irq+2);
++ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.coreid, oldirq+2, irq+2);
+ }
+
+ static void print_irq(struct ssb_device *dev, unsigned int irq)
+ {
+- int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- ssb_dprintk(KERN_INFO PFX
+- "core 0x%04x, irq :", dev->id.coreid);
+- for (i = 0; i <= 6; i++) {
+- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+- }
+- ssb_dprintk("\n");
++ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
++ dev->id.coreid,
++ irq_name[0], irq == 0 ? "*" : " ",
++ irq_name[1], irq == 1 ? "*" : " ",
++ irq_name[2], irq == 2 ? "*" : " ",
++ irq_name[3], irq == 3 ? "*" : " ",
++ irq_name[4], irq == 4 ? "*" : " ",
++ irq_name[5], irq == 5 ? "*" : " ",
++ irq_name[6], irq == 6 ? "*" : " ");
+ }
+
+ static void dump_irq(struct ssb_bus *bus)
+@@ -178,9 +199,9 @@ static void ssb_mips_serial_init(struct
{
struct ssb_bus *bus = mcore->dev->bus;
mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
else
mcore->nr_serial_ports = 0;
-@@ -190,16 +190,33 @@ static void ssb_mips_flash_detect(struct
+@@ -189,17 +210,42 @@ static void ssb_mips_serial_init(struct
+ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
{
struct ssb_bus *bus = mcore->dev->bus;
++ struct ssb_pflash *pflash = &mcore->pflash;
- mcore->flash_buswidth = 2;
- if (bus->chipco.dev) {
- mcore->flash_window_size = 0x02000000;
+ /* When there is no chipcommon on the bus there is 4MB flash */
+ if (!ssb_chipco_available(&bus->chipco)) {
-+ mcore->pflash.present = true;
-+ mcore->pflash.buswidth = 2;
-+ mcore->pflash.window = SSB_FLASH1;
-+ mcore->pflash.window_size = SSB_FLASH1_SZ;
-+ return;
++ pflash->present = true;
++ pflash->buswidth = 2;
++ pflash->window = SSB_FLASH1;
++ pflash->window_size = SSB_FLASH1_SZ;
++ goto ssb_pflash;
+ }
+
+ /* There is ChipCommon, so use it to read info about flash */
+ break;
+ case SSB_CHIPCO_FLASHT_PARA:
+ pr_debug("Found parallel flash\n");
-+ mcore->pflash.present = true;
-+ mcore->pflash.window = SSB_FLASH2;
-+ mcore->pflash.window_size = SSB_FLASH2_SZ;
++ pflash->present = true;
++ pflash->window = SSB_FLASH2;
++ pflash->window_size = SSB_FLASH2_SZ;
if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
& SSB_CHIPCO_CFG_DS16) == 0)
- mcore->flash_buswidth = 1;
- } else {
- mcore->flash_window = 0x1fc00000;
- mcore->flash_window_size = 0x00400000;
-+ mcore->pflash.buswidth = 1;
++ pflash->buswidth = 1;
+ else
-+ mcore->pflash.buswidth = 2;
++ pflash->buswidth = 2;
+ break;
++ }
++
++ssb_pflash:
++ if (pflash->present) {
++ ssb_pflash_data.width = pflash->buswidth;
++ ssb_pflash_resource.start = pflash->window;
++ ssb_pflash_resource.end = pflash->window + pflash->window_size;
}
}
-@@ -211,9 +228,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+@@ -211,9 +257,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
return ssb_pmu_get_cpu_clock(&bus->chipco);
ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
} else
return 0;
-@@ -249,9 +266,9 @@ void ssb_mipscore_init(struct ssb_mipsco
+@@ -241,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ if (!mcore->dev)
+ return; /* We don't have a MIPS core */
+
+- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
++ ssb_dbg("Initializing MIPS core...\n");
+
+ bus = mcore->dev->bus;
+ hz = ssb_clockspeed(bus);
+@@ -249,9 +295,9 @@ void ssb_mipscore_init(struct ssb_mipsco
hz = 100000000;
ns = 1000000000 / hz;
ssb_chipco_timing_init(&bus->chipco, ns);
/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
+@@ -289,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ break;
+ }
+ }
+- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
++ ssb_dbg("after irq reconfiguration\n");
+ dump_irq(bus);
+
+ ssb_mips_serial_init(mcore);
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
+ return -ENODEV;
+ }
+
+- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+- pci_name(d));
++ ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ return;
+
+- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
++ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
+ if (pcibios_enable_device(dev, ~0) < 0) {
+- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
++ ssb_err("PCI: SSB bridge enable failed\n");
+ return;
+ }
+
+@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
+
+ /* Make sure our latency is high enough to handle the devices behind us */
+ lat = 168;
+- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+- pci_name(dev), lat);
++ ssb_info("PCI: Fixing latency timer of device %s to %u\n",
++ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+@@ -323,7 +322,7 @@ static void __devinit ssb_pcicore_init_h
+ return;
+ extpci_core = pc;
+
+- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
++ ssb_dbg("PCIcore in host mode found\n");
+ /* Reset devices on the external PCI bus */
+ val = SSB_PCICORE_CTL_RST_OE;
+ val |= SSB_PCICORE_CTL_CLK_OE;
+@@ -338,7 +337,7 @@ static void __devinit ssb_pcicore_init_h
+ udelay(1); /* Assertion time demanded by the PCI standard */
+
+ if (pc->dev->bus->has_cardbus_slot) {
+- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
++ ssb_dbg("CardBus slot detected\n");
+ pc->cardbusmode = 1;
+ /* GPIO 1 resets the bridge */
+ ssb_gpio_out(pc->dev->bus, 1, 1);
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -4,11 +4,13 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/ssb/ssb_driver_pci.h>
-@@ -32,6 +34,39 @@ int ssb_watchdog_timer_set(struct ssb_bu
+@@ -32,6 +34,38 @@ int ssb_watchdog_timer_set(struct ssb_bu
}
EXPORT_SYMBOL(ssb_watchdog_timer_set);
+ bus->busnumber, &wdt,
+ sizeof(wdt));
+ if (IS_ERR(pdev)) {
-+ ssb_dprintk(KERN_INFO PFX
-+ "can not register watchdog device, err: %li\n",
-+ PTR_ERR(pdev));
++ ssb_dbg("can not register watchdog device, err: %li\n",
++ PTR_ERR(pdev));
+ return PTR_ERR(pdev);
+ }
+
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_gige.h>
-@@ -433,6 +434,11 @@ static void ssb_devices_unregister(struc
+@@ -274,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
+
+ err = sdrv->probe(sdev, &sdev->id);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+- dev_name(sdev->dev));
++ ssb_err("Failed to thaw device %s\n",
++ dev_name(sdev->dev));
+ result = err;
+ }
+ ssb_device_put(sdev);
+@@ -433,10 +434,23 @@ static void ssb_devices_unregister(struc
if (sdev->dev)
device_unregister(sdev->dev);
}
}
void ssb_bus_unregister(struct ssb_bus *bus)
-@@ -561,6 +567,8 @@ static int __devinit ssb_attach_queued_b
+ {
++ int err;
++
++ err = ssb_gpio_unregister(bus);
++ if (err == -EBUSY)
++ ssb_dbg("Some GPIOs are still in use\n");
++ else if (err)
++ ssb_dbg("Can not unregister GPIO driver: %i\n", err);
++
+ ssb_buses_lock();
+ ssb_devices_unregister(bus);
+ list_del(&bus->list);
+@@ -482,8 +496,7 @@ static int ssb_devices_register(struct s
+
+ devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+ if (!devwrap) {
+- ssb_printk(KERN_ERR PFX
+- "Could not allocate device\n");
++ ssb_err("Could not allocate device\n");
+ err = -ENOMEM;
+ goto error;
+ }
+@@ -522,9 +535,7 @@ static int ssb_devices_register(struct s
+ sdev->dev = dev;
+ err = device_register(dev);
+ if (err) {
+- ssb_printk(KERN_ERR PFX
+- "Could not register %s\n",
+- dev_name(dev));
++ ssb_err("Could not register %s\n", dev_name(dev));
+ /* Set dev to NULL to not unregister
+ * dev on error unwinding. */
+ sdev->dev = NULL;
+@@ -534,6 +545,22 @@ static int ssb_devices_register(struct s
+ dev_idx++;
+ }
+
++#ifdef CONFIG_SSB_DRIVER_MIPS
++ if (bus->mipscore.pflash.present) {
++ err = platform_device_register(&ssb_pflash_dev);
++ if (err)
++ pr_err("Error registering parallel flash\n");
++ }
++#endif
++
++#ifdef CONFIG_SSB_SFLASH
++ if (bus->mipscore.sflash.present) {
++ err = platform_device_register(&ssb_sflash_dev);
++ if (err)
++ pr_err("Error registering serial flash\n");
++ }
++#endif
++
+ return 0;
+ error:
+ /* Unwind the already registered devices. */
+@@ -561,6 +588,8 @@ static int __devinit ssb_attach_queued_b
if (err)
goto error;
ssb_pcicore_init(&bus->pcicore);
ssb_bus_may_powerdown(bus);
err = ssb_devices_register(bus);
-@@ -796,7 +804,14 @@ static int __devinit ssb_bus_register(st
+@@ -796,7 +825,13 @@ static int __devinit ssb_bus_register(st
if (err)
goto err_pcmcia_exit;
ssb_chipcommon_init(&bus->chipco);
ssb_mipscore_init(&bus->mipscore);
+ err = ssb_gpio_init(bus);
+ if (err == -ENOTSUPP)
-+ ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
++ ssb_dbg("GPIO driver not activated\n");
+ else if (err)
-+ ssb_dprintk(KERN_ERR PFX
-+ "Error registering GPIO driver: %i\n", err);
++ ssb_dbg("Error registering GPIO driver: %i\n", err);
err = ssb_fetch_invariants(bus, get_invariants);
if (err) {
ssb_bus_may_powerdown(bus);
-@@ -1118,8 +1133,7 @@ static u32 ssb_tmslow_reject_bitmask(str
+@@ -847,11 +882,11 @@ int __devinit ssb_bus_pcibus_register(st
+
+ err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCI device %s\n", dev_name(&host_pci->dev));
++ ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
++ dev_name(&host_pci->dev));
+ } else {
+- ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+- " of SSB with error %d\n", err);
++ ssb_err("Failed to register PCI version of SSB with error %d\n",
++ err);
+ }
+
+ return err;
+@@ -872,8 +907,8 @@ int __devinit ssb_bus_pcmciabus_register
+
+ err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCMCIA device %s\n", pcmcia_dev->devname);
++ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
++ pcmcia_dev->devname);
+ }
+
+ return err;
+@@ -895,8 +930,8 @@ int __devinit ssb_bus_sdiobus_register(s
+
+ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "SDIO device %s\n", sdio_func_id(func));
++ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
++ sdio_func_id(func));
+ }
+
+ return err;
+@@ -915,8 +950,8 @@ int __devinit ssb_bus_ssbbus_register(st
+
+ err = ssb_bus_register(bus, get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
+- "address 0x%08lX\n", baseaddr);
++ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
++ baseaddr);
+ }
+
+ return err;
+@@ -1118,8 +1153,7 @@ static u32 ssb_tmslow_reject_bitmask(str
case SSB_IDLOW_SSBREV_27: /* same here */
return SSB_TMSLOW_REJECT; /* this is a guess */
default:
}
return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
}
+@@ -1311,7 +1345,7 @@ out:
+ #endif
+ return err;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
++ ssb_err("Bus powerdown failed\n");
+ goto out;
+ }
+ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1334,7 +1368,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
++ ssb_err("Bus powerup failed\n");
+ return err;
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+@@ -1442,15 +1476,13 @@ static int __init ssb_modinit(void)
+
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+- "initialization failed\n");
++ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+ err = ssb_gige_init();
+ if (err) {
+- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+- "driver initialization failed\n");
++ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
+ }
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return -ENODEV;
+ }
+
+@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
+ unsigned long flags;
+
+ #if SSB_VERBOSE_PCICORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ spin_lock_irqsave(&bus->bar_lock, flags);
+@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
+ return t[crc ^ data];
+ }
+
++static void sprom_get_mac(char *mac, const u16 *in)
++{
++ int i;
++ for (i = 0; i < 3; i++) {
++ *mac++ = in[i] >> 8;
++ *mac++ = in[i];
++ }
++}
++
+ static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
+ {
+ int word;
+@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
+ u32 spromctl;
+ u16 size = bus->sprom_size;
+
+- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+ if (err)
+ goto err_ctlreg;
+@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
+ err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+ if (err)
+ goto err_ctlreg;
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ mmiowb();
+ msleep(20);
+@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
+ if (err)
+ goto err_ctlreg;
+ msleep(500);
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+
+ return 0;
+ err_ctlreg:
+- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
++ ssb_err("Could not access SPROM control register.\n");
+ return err;
+ }
+
+@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
+ return (s8)gain;
+ }
+
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++ SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 loc[3];
+
+ if (out->revision == 3) /* rev 3 moved MAC */
+@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss
+ loc[1] = SSB_SPROM1_ET0MAC;
+ loc[2] = SSB_SPROM1_ET1MAC;
+ }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[0]) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
+ if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[1]) + i];
+- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
+- }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[2]) + i];
+- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
++ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
+ }
+ SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
+@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss
+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 1)
+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ SSB_SPROM1_BINF_CCODE_SHIFT);
+@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss
+ SSB_SPROM1_ITSSI_A_SHIFT);
+ SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
+ SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+- if (out->revision >= 2)
+- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+
+@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss
+ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_A,
+ SSB_SPROM1_AGAIN_A_SHIFT);
++ if (out->revision >= 2)
++ sprom_extract_r23(out, in);
+ }
+
+ /* Revs 4 5 and 8 have partially shared layout */
+@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss
+
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 il0mac_offset;
+
+ if (out->revision == 4)
+ il0mac_offset = SSB_SPROM4_IL0MAC;
+ else
+ il0mac_offset = SSB_SPROM5_IL0MAC;
+- /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(il0mac_offset) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++
++ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
++
+ SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
+ SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 4) {
+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
+@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v, o;
++ u16 o;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_
+ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
++
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus
+ memset(out, 0, sizeof(*out));
+
+ out->revision = in[size - 1] & 0x00FF;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
++ ssb_dbg("SPROM revision %d detected\n", out->revision);
+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
+ memset(out->et1mac, 0xFF, 6);
+
+@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus
+ * number stored in the SPROM.
+ * Always extract r1. */
+ out->revision = 1;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++ ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ }
+
+ switch (out->revision) {
+@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus
+ sprom_extract_r8(out, in);
+ break;
+ default:
+- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+- " revision %d detected. Will extract"
+- " v1\n", out->revision);
++ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++ out->revision);
+ out->revision = 1;
+ sprom_extract_r123(out, in);
+ }
+@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ u16 *buf;
+
+ if (!ssb_is_sprom_available(bus)) {
+- ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++ ssb_err("No SPROM available!\n");
+ return -ENODEV;
+ }
+ if (bus->chipco.dev) { /* can be unavailable! */
+@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ } else {
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ }
+- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
++ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+
+ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ if (!buf)
+@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+- ssb_printk(KERN_WARNING PFX "WARNING: Using"
+- " fallback SPROM failed (err %d)\n",
+- err);
++ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
++ err);
+ } else {
+- ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+- " revision %d provided by"
+- " platform.\n", sprom->revision);
++ ssb_dbg("Using SPROM revision %d provided by platform\n",
++ sprom->revision);
+ err = 0;
+ goto out_free;
+ }
+- ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
+- " SPROM CRC (corrupt SPROM)\n");
++ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ }
+ }
+ err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+- pci_set_power_state(dev, 0);
++ pci_set_power_state(dev, PCI_D0);
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return err;
+ }
+
+@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
+ int err;
+
+ #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
+@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
++ ssb_err("Failed to switch pcmcia segment\n");
+ return err;
+ }
+
+@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
+ bool failed = 0;
+ size_t size = SSB_PCMCIA_SPROM_SIZE;
+
+- ssb_printk(KERN_NOTICE PFX
+- "Writing SPROM. Do NOT turn off the power! "
+- "Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not enable SPROM write access.\n");
++ ssb_notice("Could not enable SPROM write access\n");
+ return -EBUSY;
+ }
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Failed to write to SPROM.\n");
++ ssb_notice("Failed to write to SPROM\n");
+ failed = 1;
+ break;
+ }
+ }
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not disable SPROM write access.\n");
++ ssb_notice("Could not disable SPROM write access\n");
+ failed = 1;
+ }
+ msleep(500);
+ if (!failed) {
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+ }
+
+ return failed ? -EBUSY : 0;
+@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
+ return -ENOSPC; /* continue with next entry */
+
+ error:
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ ssb_pcmcia_get_mac, sprom);
+ if (res != 0) {
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch MAC address\n");
+ return -ENODEV;
+ }
+@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ if ((res == 0) || (res == -ENOSPC))
+ return 0;
+
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants\n");
+ return -ENODEV;
+ }
+@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
++ ssb_err("Failed to initialize PCMCIA host device\n");
+ return err;
+ }
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
+ chipid_fallback = 0x4401;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "PCI-ID not in fallback list\n");
++ ssb_err("PCI-ID not in fallback list\n");
+ }
+
+ return chipid_fallback;
+@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ case 0x4704:
+ return 9;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "CHIPID not in nrcores fallback list\n");
++ ssb_err("CHIPID not in nrcores fallback list\n");
+ }
+
+ return 1;
+@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ bus->chip_package = 0;
+ }
+ }
+- ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
+- "package 0x%02X\n", bus->chip_id, bus->chip_rev,
+- bus->chip_package);
++ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++ bus->chip_id, bus->chip_rev, bus->chip_package);
+ if (!bus->nr_devices)
+ bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+- ssb_printk(KERN_ERR PFX
+- "More than %d ssb cores found (%d)\n",
+- SSB_MAX_NR_CORES, bus->nr_devices);
++ ssb_err("More than %d ssb cores found (%d)\n",
++ SSB_MAX_NR_CORES, bus->nr_devices);
+ goto err_unmap;
+ }
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ nr_80211_cores++;
+ if (nr_80211_cores > 1) {
+ if (!we_support_multiple_80211_cores(bus)) {
+- ssb_dprintk(KERN_INFO PFX "Ignoring additional "
+- "802.11 core\n");
++ ssb_dbg("Ignoring additional 802.11 core\n");
+ continue;
+ }
+ }
+@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_EXTIF:
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ if (bus->extif.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple EXTIFs found\n");
++ ssb_warn("WARNING: Multiple EXTIFs found\n");
+ break;
+ }
+ bus->extif.dev = dev;
+@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ break;
+ case SSB_DEV_CHIPCOMMON:
+ if (bus->chipco.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple ChipCommon found\n");
++ ssb_warn("WARNING: Multiple ChipCommon found\n");
+ break;
+ }
+ bus->chipco.dev = dev;
+@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_MIPS_3302:
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple MIPS cores found\n");
++ ssb_warn("WARNING: Multiple MIPS cores found\n");
+ break;
+ }
+ bus->mipscore.dev = dev;
+@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ }
+ }
+ if (bus->pcicore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple PCI(E) cores found\n");
++ ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ break;
+ }
+ bus->pcicore.dev = dev;
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
+ while (cnt < sprom_size_words) {
+ memcpy(tmp, dump, 4);
+ dump += 4;
+- err = strict_strtoul(tmp, 16, &parsed);
++ err = kstrtoul(tmp, 16, &parsed);
+ if (err)
+ return err;
+ sprom[cnt++] = swab16((u16)parsed);
+@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ goto out_kfree;
+ err = ssb_devices_freeze(bus, &freeze);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
++ ssb_err("SPROM write: Could not freeze all devices\n");
+ goto out_unlock;
+ }
+ res = sprom_write(bus, sprom);
+ err = ssb_devices_thaw(&freeze);
+ if (err)
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
++ ssb_err("SPROM write: Could not thaw all devices\n");
+ out_unlock:
+ mutex_unlock(&bus->sprom_mutex);
+ out_kfree:
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
-@@ -3,6 +3,7 @@
+@@ -3,21 +3,33 @@
#include <linux/ssb/ssb.h>
#include <linux/types.h>
#define PFX "ssb: "
-@@ -210,5 +211,63 @@ static inline void b43_pci_ssb_bridge_ex
+
+ #ifdef CONFIG_SSB_SILENT
+-# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_printk(fmt, ...) \
++ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+ #else
+-# define ssb_printk printk
++# define ssb_printk(fmt, ...) \
++ printk(fmt, ##__VA_ARGS__)
+ #endif /* CONFIG_SSB_SILENT */
+
++#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
++#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
++#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
++#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
++#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
++#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
++
+ /* dprintk: Debugging printk; vanishes for non-debug compilation */
+ #ifdef CONFIG_SSB_DEBUG
+-# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x)
++# define ssb_dbg(fmt, ...) \
++ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
+ #else
+-# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_dbg(fmt, ...) \
++ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
+ #endif
+
+ #ifdef CONFIG_SSB_DEBUG
+@@ -210,5 +222,76 @@ static inline void b43_pci_ssb_bridge_ex
/* driver_chipcommon_pmu.c */
extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
+}
+#endif /* CONFIG_SSB_SFLASH */
+
++#ifdef CONFIG_SSB_DRIVER_MIPS
++extern struct platform_device ssb_pflash_dev;
++#endif
++
++#ifdef CONFIG_SSB_SFLASH
++extern struct platform_device ssb_sflash_dev;
++#endif
++
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
+extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+
+#ifdef CONFIG_SSB_DRIVER_GPIO
+extern int ssb_gpio_init(struct ssb_bus *bus);
++extern int ssb_gpio_unregister(struct ssb_bus *bus);
+#else /* CONFIG_SSB_DRIVER_GPIO */
+static inline int ssb_gpio_init(struct ssb_bus *bus)
+{
+ return -ENOTSUPP;
+}
++static inline int ssb_gpio_unregister(struct ssb_bus *bus)
++{
++ return 0;
++}
+#endif /* CONFIG_SSB_DRIVER_GPIO */
#endif /* LINUX_SSB_PRIVATE_H_ */
#include <linux/ssb/ssb_regs.h>
-@@ -432,7 +434,11 @@ struct ssb_bus {
+@@ -24,9 +26,9 @@ struct ssb_sprom_core_pwr_info {
+
+ struct ssb_sprom {
+ u8 revision;
+- u8 il0mac[6]; /* MAC address for 802.11b/g */
+- u8 et0mac[6]; /* MAC address for Ethernet */
+- u8 et1mac[6]; /* MAC address for 802.11a */
++ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
++ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
++ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
+ u8 et0phyaddr; /* MII address for enet0 */
+ u8 et1phyaddr; /* MII address for enet1 */
+ u8 et0mdcport; /* MDIO for enet0 */
+@@ -338,13 +340,61 @@ enum ssb_bustype {
+ #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
+ #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
+ /* board_type */
++#define SSB_BOARD_BCM94301CB 0x0406
++#define SSB_BOARD_BCM94301MP 0x0407
++#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_BCM94309CB 0x040B
++#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BU4306 0x0416
+ #define SSB_BOARD_BCM94306MP 0x0418
+ #define SSB_BOARD_BCM4309G 0x0421
+ #define SSB_BOARD_BCM4306CB 0x0417
+-#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */
++#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */
++#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */
++#define SSB_BOARD_BU4704SD 0x042E /* with sdram */
++#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */
++#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */
++#define SSB_BOARD_BU4318 0x0447
++#define SSB_BOARD_CB4318 0x0448
++#define SSB_BOARD_MPG4318 0x0449
+ #define SSB_BOARD_MP4318 0x044A
+-#define SSB_BOARD_BU4306 0x0416
+-#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_SD4318 0x044B
++#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */
++#define SSB_BOARD_BCM94303MP 0x044E
++#define SSB_BOARD_BCM94306MPM 0x0450
++#define SSB_BOARD_BCM94306MPL 0x0453
++#define SSB_BOARD_PC4303 0x0454 /* pcmcia */
++#define SSB_BOARD_BCM94306MPLNA 0x0457
++#define SSB_BOARD_BCM94306MPH 0x045B
++#define SSB_BOARD_BCM94306PCIV 0x045C
++#define SSB_BOARD_BCM94318MPGH 0x0463
++#define SSB_BOARD_BU4311 0x0464
++#define SSB_BOARD_BCM94311MC 0x0465
++#define SSB_BOARD_BCM94311MCAG 0x0466
++/* 4321 boards */
++#define SSB_BOARD_BU4321 0x046B
++#define SSB_BOARD_BU4321E 0x047C
++#define SSB_BOARD_MP4321 0x046C
++#define SSB_BOARD_CB2_4321 0x046D
++#define SSB_BOARD_CB2_4321_AG 0x0066
++#define SSB_BOARD_MC4321 0x046E
++/* 4325 boards */
++#define SSB_BOARD_BCM94325DEVBU 0x0490
++#define SSB_BOARD_BCM94325BGABU 0x0491
++#define SSB_BOARD_BCM94325SDGWB 0x0492
++#define SSB_BOARD_BCM94325SDGMDL 0x04AA
++#define SSB_BOARD_BCM94325SDGMDL2 0x04C6
++#define SSB_BOARD_BCM94325SDGMDL3 0x04C9
++#define SSB_BOARD_BCM94325SDABGWBA 0x04E1
++/* 4322 boards */
++#define SSB_BOARD_BCM94322MC 0x04A4
++#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */
++#define SSB_BOARD_BCM94322HM 0x04B0
++#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */
++/* 4312 boards */
++#define SSB_BOARD_BU4312 0x048A
++#define SSB_BOARD_BCM4312MCGSG 0x04B5
+ /* chip_package */
+ #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
+ #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
+@@ -432,7 +482,11 @@ struct ssb_bus {
#ifdef CONFIG_SSB_EMBEDDED
/* Lock for GPIO register access. */
spinlock_t gpio_lock;
+
#endif /* CONFIG_SSB_DRIVER_EXTIF */
#endif /* LINUX_SSB_EXTIFCORE_H_ */
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
+ return 0;
+ }
+
+-#ifdef CONFIG_BCM47XX
+-#include <asm/mach-bcm47xx/nvram.h>
+ /* Get the device MAC address */
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+-{
+- char buf[20];
+- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+- return;
+- nvram_parse_macaddr(buf, macaddr);
+-}
+-#else
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+ {
++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++ if (!dev)
++ return -ENODEV;
++
++ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
++ return 0;
+ }
+-#endif
+
+ extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev);
+@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
+ {
+ return 0;
+ }
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++{
++ return -ENODEV;
++}
+
+ #endif /* CONFIG_SSB_DRIVER_GIGE */
+ #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
-@@ -13,6 +13,12 @@ struct ssb_serial_port {
+@@ -13,6 +13,24 @@ struct ssb_serial_port {
unsigned int reg_shift;
};
+ u32 window;
+ u32 window_size;
+};
++
++#ifdef CONFIG_SSB_SFLASH
++struct ssb_sflash {
++ bool present;
++ u32 window;
++ u32 blocksize;
++ u16 numblocks;
++ u32 size;
++
++ void *priv;
++};
++#endif
struct ssb_mipscore {
struct ssb_device *dev;
-@@ -20,9 +26,7 @@ struct ssb_mipscore {
+@@ -20,9 +38,10 @@ struct ssb_mipscore {
int nr_serial_ports;
struct ssb_serial_port serial_ports[4];
- u32 flash_window;
- u32 flash_window_size;
+ struct ssb_pflash pflash;
++#ifdef CONFIG_SSB_SFLASH
++ struct ssb_sflash sflash;
++#endif
};
extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
+@@ -41,6 +60,11 @@ void ssb_mipscore_init(struct ssb_mipsco
+ {
+ }
+
++static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
++{
++ return 0;
++}
++
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+
+ #endif /* LINUX_SSB_MIPSCORE_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -289,11 +289,11 @@
+@@ -172,6 +172,7 @@
+ #define SSB_SPROMSIZE_WORDS_R4 220
+ #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
++#define SSB_SPROMSIZE_WORDS_R10 230
+ #define SSB_SPROM_BASE1 0x1000
+ #define SSB_SPROM_BASE31 0x0800
+ #define SSB_SPROM_REVISION 0x007E
+@@ -289,11 +290,11 @@
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM4_AGAIN0_SHIFT 0
-@@ -485,7 +485,7 @@
+@@ -485,7 +486,7 @@
#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5
break;
#endif
}
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
- return (s8)gain;
- }
-
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+ SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
- static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
- {
- int i;
-@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
- SSB_SPROM1_ITSSI_A_SHIFT);
- SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
- SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-- if (out->revision >= 2)
-- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+
- SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
- SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-
-@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
- out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
- SSB_SPROM1_AGAIN_A,
- SSB_SPROM1_AGAIN_A_SHIFT);
-+ if (out->revision >= 2)
-+ sprom_extract_r23(out, in);
- }
-
- /* Revs 4 5 and 8 have partially shared layout */
+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(voi
+
+ p->mapbase = (unsigned int) bcma_port->regs;
+ p->membase = (void *) bcma_port->regs;
+- p->irq = bcma_port->irq + 2;
++ p->irq = bcma_port->irq;
+ p->uartclk = bcma_port->baud_base;
+ p->regshift = bcma_port->reg_shift;
+ p->iotype = UPIO_MEM;
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -48,12 +48,12 @@ config BCMA_DRIVER_MIPS
+@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
+ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
++ default y
+
+ config BCMA_DRIVER_PCI_HOSTMODE
+ bool "Driver for PCI core working in hostmode"
+@@ -48,12 +49,12 @@ config BCMA_DRIVER_MIPS
config BCMA_SFLASH
bool
default y
config BCMA_DRIVER_GMAC_CMN
-@@ -65,6 +65,14 @@ config BCMA_DRIVER_GMAC_CMN
+@@ -65,6 +66,14 @@ config BCMA_DRIVER_GMAC_CMN
If unsure, say N
obj-$(CONFIG_BCMA) += bcma.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -31,6 +31,8 @@ int __init bcma_bus_early_register(struc
+@@ -22,6 +22,8 @@
+ struct bcma_bus;
+
+ /* main.c */
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout);
+ int __devinit bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+@@ -31,6 +33,8 @@ int __init bcma_bus_early_register(struc
int bcma_bus_suspend(struct bcma_bus *bus);
int bcma_bus_resume(struct bcma_bus *bus);
#endif
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
-@@ -48,12 +50,13 @@ void bcma_chipco_serial_init(struct bcma
+@@ -45,15 +49,17 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ /* driver_chipcommon.c */
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_pflash_dev;
#endif /* CONFIG_BCMA_DRIVER_MIPS */
/* driver_chipcommon_pmu.c */
#else
static inline int bcma_sflash_init(struct bcma_drv_cc *cc)
{
-@@ -65,6 +68,7 @@ static inline int bcma_sflash_init(struc
+@@ -65,6 +71,7 @@ static inline int bcma_sflash_init(struc
#ifdef CONFIG_BCMA_NFLASH
/* driver_chipcommon_nflash.c */
int bcma_nflash_init(struct bcma_drv_cc *cc);
#else
static inline int bcma_nflash_init(struct bcma_drv_cc *cc)
{
-@@ -82,9 +86,21 @@ extern void __exit bcma_host_pci_exit(vo
+@@ -82,9 +89,26 @@ extern void __exit bcma_host_pci_exit(vo
/* driver_pci.c */
u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
+#ifdef CONFIG_BCMA_DRIVER_GPIO
+/* driver_gpio.c */
+int bcma_gpio_init(struct bcma_drv_cc *cc);
++int bcma_gpio_unregister(struct bcma_drv_cc *cc);
+#else
+static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
+ return -ENOTSUPP;
+}
++static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return 0;
++}
+#endif /* CONFIG_BCMA_DRIVER_GPIO */
+
#endif
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
-@@ -65,7 +65,7 @@ void bcma_core_set_clockmode(struct bcma
+@@ -9,6 +9,25 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_aread32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ bool bcma_core_is_enabled(struct bcma_device *core)
+ {
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_devic
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+- bcma_awrite32(core, BCMA_IOCTL, flags);
+- bcma_aread32(core, BCMA_IOCTL);
+- udelay(10);
++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_disable);
+
+@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+@@ -65,7 +87,7 @@ void bcma_core_set_clockmode(struct bcma
switch (clkmode) {
case BCMA_CLKMODE_FAST:
bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
for (i = 0; i < 1500; i++) {
if (bcma_read32(core, BCMA_CLKCTLST) &
BCMA_CLKCTLST_HAVEHT) {
+@@ -104,7 +126,13 @@ void bcma_core_pll_ctl(struct bcma_devic
+ if (i)
+ bcma_err(core->bus, "PLL enable timeout\n");
+ } else {
+- bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
++ /*
++ * Mask the PLL but don't wait for it to be disabled. PLL may be
++ * shared between cores and will be still up if there is another
++ * core using it.
++ */
++ bcma_mask32(core, BCMA_CLKCTLST, ~req);
++ bcma_read32(core, BCMA_CLKCTLST);
+ }
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -4,12 +4,15 @@
#include <linux/bcma/bcma.h>
static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
-@@ -22,20 +25,120 @@ static inline u32 bcma_cc_write32_masked
+@@ -22,23 +25,130 @@ static inline u32 bcma_cc_write32_masked
return value;
}
+ bcma_core_chipcommon_early_init(cc);
+
if (cc->core->id.rev >= 20) {
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
-@@ -56,15 +159,33 @@ void bcma_core_chipcommon_init(struct bc
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ u32 pullup = 0, pulldown = 0;
++
++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
++ pullup = 0x402e0;
++ pulldown = 0x20500;
++ }
++
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
+ }
+
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+@@ -56,15 +166,33 @@ void bcma_core_chipcommon_init(struct bc
((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
(leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
}
}
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
-@@ -84,28 +205,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+@@ -84,28 +212,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
}
#ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -118,8 +310,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -118,8 +317,7 @@ void bcma_chipco_serial_init(struct bcma
struct bcma_serial_port *ports = cc->serial_ports;
if (ccrev >= 11 && ccrev != 15) {
if (ccrev >= 21) {
/* Turn off UART clock before switching clocksource. */
bcma_cc_write32(cc, BCMA_CC_CORECTL,
+@@ -141,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+ return;
+ }
+
+- irq = bcma_core_mips_irq(cc->core);
++ irq = bcma_core_irq(cc->core);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
--- a/drivers/bcma/driver_chipcommon_nflash.c
+++ b/drivers/bcma/driver_chipcommon_nflash.c
@@ -5,15 +5,40 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
++#include "bcma_private.h"
++
+#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
-#include <linux/bcma/bcma_driver_chipcommon.h>
-#include <linux/delay.h>
- #include "bcma_private.h"
-
+-#include "bcma_private.h"
+struct platform_device bcma_nflash_dev = {
+ .name = "bcma_nflash",
+ .num_resources = 0,
+};
-+
+
/* Initialize NAND flash access */
int bcma_nflash_init(struct bcma_drv_cc *cc)
{
+ struct bcma_bus *bus = cc->core->bus;
+
+ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
-+ cc->core->id.rev != 0x38) {
++ cc->core->id.rev != 38) {
+ bcma_err(bus, "NAND flash on unsupported board!\n");
+ return -ENOTSUPP;
+ }
void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
{
-@@ -76,7 +77,10 @@ static void bcma_pmu_resources_init(stru
+@@ -55,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+
++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
++{
++ u32 ilp_ctl, alp_hz;
++
++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
++ return 0;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++ usleep_range(1000, 2000);
++
++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++
++ alp_hz = ilp_ctl * 32768 / 4;
++ return (alp_hz + 50000) / 100000 * 100;
++}
++
++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 freq_tgt_target = 0, freq_tgt_current;
++ u32 pll0, mask;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ /* pmu2_xtaltab0_adfll_485 */
++ switch (xtalfreq) {
++ case 12000:
++ freq_tgt_target = 0x50D52;
++ break;
++ case 20000:
++ freq_tgt_target = 0x307FE;
++ break;
++ case 26000:
++ freq_tgt_target = 0x254EA;
++ break;
++ case 37400:
++ freq_tgt_target = 0x19EF8;
++ break;
++ case 52000:
++ freq_tgt_target = 0x12A75;
++ break;
++ }
++ break;
++ }
++
++ if (!freq_tgt_target) {
++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
++ xtalfreq);
++ return;
++ }
++
++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++
++ if (freq_tgt_current == freq_tgt_target) {
++ bcma_debug(bus, "Target TGT frequency already set\n");
++ return;
++ }
++
++ /* Turn off PLL */
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
++ BCMA_RES_4314_MACPHY_CLK_AVAIL);
++
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++ bcma_wait_value(cc->core, BCMA_CLKCTLST,
++ BCMA_CLKCTLST_HAVEHT, 0, 20000);
++ break;
++ }
++
++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
++
++ /* Flush */
++ if (cc->pmu.rev >= 2)
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++
++ /* TODO: Do we need to update OTP? */
++}
++
++static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ if (xtalfreq == 0)
++ xtalfreq = 20000;
++ bcma_pmu2_pll_init0(cc, xtalfreq);
++ break;
++ }
++}
++
+ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+@@ -65,6 +169,25 @@ static void bcma_pmu_resources_init(stru
+ min_msk = 0x200D;
+ max_msk = 0xFFFF;
+ break;
++ case BCMA_CHIP_ID_BCM43142:
++ min_msk = BCMA_RES_4314_LPLDO_PU |
++ BCMA_RES_4314_PMU_SLEEP_DIS |
++ BCMA_RES_4314_PMU_BG_PU |
++ BCMA_RES_4314_CBUCK_LPOM_PU |
++ BCMA_RES_4314_CBUCK_PFM_PU |
++ BCMA_RES_4314_CLDO_PU |
++ BCMA_RES_4314_LPLDO2_LVM |
++ BCMA_RES_4314_WL_PMU_PU |
++ BCMA_RES_4314_LDO3P3_PU |
++ BCMA_RES_4314_OTP_PU |
++ BCMA_RES_4314_WL_PWRSW_PU |
++ BCMA_RES_4314_LQ_AVAIL |
++ BCMA_RES_4314_LOGIC_RET |
++ BCMA_RES_4314_MEM_SLEEP |
++ BCMA_RES_4314_MACPHY_RET |
++ BCMA_RES_4314_WL_CORE_READY;
++ max_msk = 0x3FFFFFFF;
++ break;
+ default:
+ bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
+ bus->chipinfo.id);
+@@ -76,7 +199,10 @@ static void bcma_pmu_resources_init(stru
if (max_msk)
bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
mdelay(2);
}
-@@ -101,7 +105,7 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -101,7 +227,7 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
}
{
struct bcma_bus *bus = cc->core->bus;
-@@ -141,7 +145,7 @@ void bcma_pmu_workarounds(struct bcma_dr
+@@ -141,7 +267,7 @@ void bcma_pmu_workarounds(struct bcma_dr
}
}
{
u32 pmucap;
-@@ -150,7 +154,10 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -150,7 +276,10 @@ void bcma_pmu_init(struct bcma_drv_cc *c
bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap);
if (cc->pmu.rev == 1)
bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
~BCMA_CC_PMU_CTL_NOILPONW);
-@@ -162,24 +169,40 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -158,28 +287,45 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+ BCMA_CC_PMU_CTL_NOILPONW);
+
++ bcma_pmu_pll_init(cc);
+ bcma_pmu_resources_init(cc);
bcma_pmu_workarounds(cc);
}
default:
bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
-@@ -190,7 +213,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+@@ -190,7 +336,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
/* Find the output of the "m" pll divider given pll controls that start with
* pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
*/
{
u32 tmp, div, ndiv, p1, p2, fc;
struct bcma_bus *bus = cc->core->bus;
-@@ -219,14 +242,14 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -219,14 +365,14 @@ static u32 bcma_pmu_clock(struct bcma_dr
ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
/* Do calculation in Mhz */
{
u32 tmp, ndiv, p1div, p2div;
u32 clock;
-@@ -257,7 +280,7 @@ static u32 bcma_pmu_clock_bcm4706(struct
+@@ -257,7 +403,7 @@ static u32 bcma_pmu_clock_bcm4706(struct
}
/* query bus clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
-+static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
-@@ -265,40 +288,42 @@ u32 bcma_pmu_get_clockcontrol(struct bcm
+@@ -265,40 +411,43 @@ u32 bcma_pmu_get_clockcontrol(struct bcm
case BCMA_CHIP_ID_BCM4716:
case BCMA_CHIP_ID_BCM4748:
case BCMA_CHIP_ID_BCM47162:
}
return BCMA_CC_PMU_HT_CLOCK;
}
++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
/* query cpu clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
BCMA_CC_PMU4706_MAINPLL_PLL0,
BCMA_CC_PMU5_MAINPLL_CPU);
case BCMA_CHIP_ID_BCM5356:
-@@ -313,10 +338,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -313,10 +462,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
break;
}
}
static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
-@@ -362,7 +388,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -362,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
break;
case BCMA_CHIP_ID_BCM4331:
-@@ -383,7 +409,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -383,7 +533,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
0x03000a08);
}
break;
case BCMA_CHIP_ID_BCM43224:
-@@ -416,7 +442,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -416,7 +566,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
0x88888815);
}
break;
case BCMA_CHIP_ID_BCM4716:
-@@ -450,7 +476,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -450,7 +600,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
0x88888815);
}
break;
case BCMA_CHIP_ID_BCM43227:
-@@ -486,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -486,7 +636,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
0x88888815);
}
* Licensed under the GNU/GPL. See COPYING for details.
*/
++#include "bcma_private.h"
++
+#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
-#include <linux/bcma/bcma_driver_chipcommon.h>
-#include <linux/delay.h>
- #include "bcma_private.h"
-
+-#include "bcma_private.h"
+static struct resource bcma_sflash_resource = {
+ .name = "bcma_sflash",
+ .start = BCMA_SOC_FLASH2,
+ u16 numblocks;
+};
+
-+static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+ { 0 },
+};
+
-+static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+ { 0 },
+};
+
-+static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+ }
+ bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
+}
-+
+
/* Initialize serial flash access */
int bcma_sflash_init(struct bcma_drv_cc *cc)
{
- bcma_err(cc->core->bus, "Serial flash support is broken\n");
+ struct bcma_bus *bus = cc->core->bus;
+ struct bcma_sflash *sflash = &cc->sflash;
-+ struct bcma_sflash_tbl_e *e;
++ const struct bcma_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
}
--- /dev/null
+++ b/drivers/bcma/driver_gpio.c
-@@ -0,0 +1,98 @@
+@@ -0,0 +1,114 @@
+/*
+ * Broadcom specific AMBA
+ * GPIO driver
+ bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
+}
+
++static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++ return bcma_core_irq(cc->core);
++ else
++ return -EINVAL;
++}
++
+int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
+ struct gpio_chip *chip = &cc->gpio;
+ chip->set = bcma_gpio_set_value;
+ chip->direction_input = bcma_gpio_direction_input;
+ chip->direction_output = bcma_gpio_direction_output;
++ chip->to_irq = bcma_gpio_to_irq;
+ chip->ngpio = 16;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+
+ return gpiochip_add(chip);
+}
++
++int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return gpiochip_remove(&cc->gpio);
++}
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
-@@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct
+@@ -14,11 +14,33 @@
+
+ #include <linux/bcma/bcma.h>
+
++#include <linux/mtd/physmap.h>
++#include <linux/platform_device.h>
+ #include <linux/serial.h>
+ #include <linux/serial_core.h>
+ #include <linux/serial_reg.h>
+ #include <linux/time.h>
+
++static const char * const part_probes[] = { "bcm47xxpart", NULL };
++
++static struct physmap_flash_data bcma_pflash_data = {
++ .part_probe_types = part_probes,
++};
++
++static struct resource bcma_pflash_resource = {
++ .name = "bcma_pflash",
++ .flags = IORESOURCE_MEM,
++};
++
++struct platform_device bcma_pflash_dev = {
++ .name = "physmap-flash",
++ .dev = {
++ .platform_data = &bcma_pflash_data,
++ },
++ .resource = &bcma_pflash_resource,
++ .num_resources = 1,
++};
++
+ /* The 47162a0 hangs when reading MIPS DMP registers registers */
+ static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
+ {
+@@ -74,28 +96,41 @@ static u32 bcma_core_mips_irqflag(struct
return dev->core_index;
flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
*/
- unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+-unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
{
-@@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct b
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
unsigned int irq;
irqflag = bcma_core_mips_irqflag(dev);
- return 0;
+ return 5;
++}
++
++unsigned int bcma_core_irq(struct bcma_device *dev)
++{
++ unsigned int mips_irq = bcma_core_mips_irq(dev);
++ return mips_irq <= 4 ? mips_irq + 2 : 0;
}
- EXPORT_SYMBOL(bcma_core_mips_irq);
+-EXPORT_SYMBOL(bcma_core_mips_irq);
++EXPORT_SYMBOL(bcma_core_irq);
-@@ -114,8 +121,8 @@ static void bcma_core_mips_set_irq(struc
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+@@ -114,8 +149,8 @@ static void bcma_core_mips_set_irq(struc
bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
~(1 << irqflag));
/* assign the new one */
if (irq == 0) {
-@@ -123,9 +130,9 @@ static void bcma_core_mips_set_irq(struc
+@@ -123,9 +158,9 @@ static void bcma_core_mips_set_irq(struc
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
(1 << irqflag));
} else {
struct bcma_device *core;
/* backplane irq line is in use, find out who uses
-@@ -133,7 +140,7 @@ static void bcma_core_mips_set_irq(struc
+@@ -133,7 +168,7 @@ static void bcma_core_mips_set_irq(struc
*/
list_for_each_entry(core, &bus->cores, list) {
if ((1 << bcma_core_mips_irqflag(core)) ==
bcma_core_mips_set_irq(core, 0);
break;
}
-@@ -143,15 +150,31 @@ static void bcma_core_mips_set_irq(struc
+@@ -143,15 +178,31 @@ static void bcma_core_mips_set_irq(struc
1 << irqflag);
}
for (i = 0; i <= 6; i++)
printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
printk("\n");
-@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -171,7 +222,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
struct bcma_bus *bus = mcore->core->bus;
if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
bcma_err(bus, "No PMU available, need this to get the cpu clock\n");
return 0;
-@@ -181,85 +204,109 @@ EXPORT_SYMBOL(bcma_cpu_clock);
+@@ -181,85 +232,143 @@ EXPORT_SYMBOL(bcma_cpu_clock);
static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
{
struct bcma_bus *bus = mcore->core->bus;
+ struct bcma_drv_cc *cc = &bus->drv_cc;
++ struct bcma_pflash *pflash = &cc->pflash;
- switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
bcma_debug(bus, "Found parallel flash\n");
- bus->drv_cc.pflash.window = 0x1c000000;
- bus->drv_cc.pflash.window_size = 0x02000000;
-+ cc->pflash.present = true;
-+ cc->pflash.window = BCMA_SOC_FLASH2;
-+ cc->pflash.window_size = BCMA_SOC_FLASH2_SZ;
++ pflash->present = true;
++ pflash->window = BCMA_SOC_FLASH2;
++ pflash->window_size = BCMA_SOC_FLASH2_SZ;
- if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
+ if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
BCMA_CC_FLASH_CFG_DS) == 0)
- bus->drv_cc.pflash.buswidth = 1;
-+ cc->pflash.buswidth = 1;
++ pflash->buswidth = 1;
else
- bus->drv_cc.pflash.buswidth = 2;
-+ cc->pflash.buswidth = 2;
++ pflash->buswidth = 2;
++
++ bcma_pflash_data.width = pflash->buswidth;
++ bcma_pflash_resource.start = pflash->window;
++ bcma_pflash_resource.end = pflash->window + pflash->window_size;
++
break;
default:
bcma_err(bus, "Flash type not supported\n");
+
+ mcore->early_setup_done = true;
+}
++
++static void bcma_fix_i2s_irqflag(struct bcma_bus *bus)
++{
++ struct bcma_device *cpu, *pcie, *i2s;
++
++ /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK)
++ * (IRQ flags > 7 are ignored when setting the interrupt masks)
++ */
++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 &&
++ bus->chipinfo.id != BCMA_CHIP_ID_BCM4748)
++ return;
++
++ cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ pcie = bcma_find_core(bus, BCMA_CORE_PCIE);
++ i2s = bcma_find_core(bus, BCMA_CORE_I2S);
++ if (cpu && pcie && i2s &&
++ bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) {
++ bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87);
++ bcma_debug(bus,
++ "Moved i2s interrupt to oob line 7 instead of 8\n");
++ }
++}
+
void bcma_core_mips_init(struct bcma_drv_mips *mcore)
{
- break;
+ bcma_core_mips_early_init(mcore);
+
++ bcma_fix_i2s_irqflag(bus);
++
+ switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM4716:
+ case BCMA_CHIP_ID_BCM4748:
+ break;
+ default:
+ list_for_each_entry(core, &bus->cores, list) {
-+ core->irq = bcma_core_mips_irq(core) + 2;
++ core->irq = bcma_core_irq(core);
}
+ bcma_err(bus,
+ "Unknown device (0x%x) found, can not configure IRQs\n",
bcma_core_enable(pc->core, 0);
return !mips_busprobe32(tmp, pc->core->io_addr);
-@@ -396,6 +391,11 @@ void __devinit bcma_core_pci_hostmode_in
+@@ -99,19 +94,19 @@ static int bcma_extpci_read_config(struc
+ if (dev == 0) {
+ /* we support only two functions on device 0 */
+ if (func > 1)
+- return -EINVAL;
++ goto out;
+
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
+ if (off >= PCI_CONFIG_SPACE_SIZE) {
+ addr = (func << 12);
+- addr |= (off & 0x0FFF);
++ addr |= (off & 0x0FFC);
+ val = bcma_pcie_read_config(pc, addr);
+ } else {
+ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
+- addr |= (off & 0xfc);
++ addr |= (off & 0xFC);
+ val = pcicore_read32(pc, addr);
+ }
+ } else {
+@@ -124,11 +119,9 @@ static int bcma_extpci_read_config(struc
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
+- val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
+-
+- val = readl(mmio);
+ }
+ val >>= (8 * (off & 3));
+
+@@ -156,7 +149,7 @@ static int bcma_extpci_write_config(stru
+ const void *buf, int len)
+ {
+ int err = -EINVAL;
+- u32 addr = 0, val = 0;
++ u32 addr, val;
+ void __iomem *mmio = 0;
+ u16 chipid = pc->core->bus->chipinfo.id;
+
+@@ -164,16 +157,22 @@ static int bcma_extpci_write_config(stru
+ if (unlikely(len != 1 && len != 2 && len != 4))
+ goto out;
+ if (dev == 0) {
++ /* we support only two functions on device 0 */
++ if (func > 1)
++ goto out;
++
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
+- if (off < PCI_CONFIG_SPACE_SIZE) {
+- addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
++ if (off >= PCI_CONFIG_SPACE_SIZE) {
++ addr = (func << 12);
++ addr |= (off & 0x0FFC);
++ val = bcma_pcie_read_config(pc, addr);
++ } else {
++ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
+- addr |= (off & 0xfc);
+- mmio = ioremap_nocache(addr, sizeof(val));
+- if (!mmio)
+- goto out;
++ addr |= (off & 0xFC);
++ val = pcicore_read32(pc, addr);
+ }
+ } else {
+ addr = bcma_get_cfgspace_addr(pc, dev, func, off);
+@@ -185,19 +184,17 @@ static int bcma_extpci_write_config(stru
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
+- val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
+ }
+
+ switch (len) {
+ case 1:
+- val = readl(mmio);
+ val &= ~(0xFF << (8 * (off & 3)));
+ val |= *((const u8 *)buf) << (8 * (off & 3));
+ break;
+ case 2:
+- val = readl(mmio);
+ val &= ~(0xFFFF << (8 * (off & 3)));
+ val |= *((const u16 *)buf) << (8 * (off & 3));
+ break;
+@@ -205,13 +202,14 @@ static int bcma_extpci_write_config(stru
+ val = *((const u32 *)buf);
+ break;
+ }
+- if (dev == 0 && !addr) {
++ if (dev == 0) {
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
+- addr = (func << 12);
+- addr |= (off & 0x0FFF);
+- bcma_pcie_write_config(pc, addr, val);
++ if (off >= PCI_CONFIG_SPACE_SIZE)
++ bcma_pcie_write_config(pc, addr, val);
++ else
++ pcicore_write32(pc, addr, val);
+ } else {
+ writel(val, mmio);
+
+@@ -282,7 +280,7 @@ static u8 __devinit bcma_find_pci_capabi
+ /* check for Header type 0 */
+ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val,
+ sizeof(u8));
+- if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL)
++ if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL)
+ return cap_ptr;
+
+ /* check if the capability pointer field exists */
+@@ -396,12 +394,19 @@ void __devinit bcma_core_pci_hostmode_in
bcma_info(bus, "PCIEcore in host mode found\n");
pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
if (!pc_host) {
bcma_err(bus, "can not allocate memory");
-@@ -425,9 +425,9 @@ void __devinit bcma_core_pci_hostmode_in
+ return;
+ }
+
++ spin_lock_init(&pc_host->cfgspace_lock);
++
+ pc->host_controller = pc_host;
+ pc_host->pci_controller.io_resource = &pc_host->io_resource;
+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
+@@ -425,9 +430,9 @@ void __devinit bcma_core_pci_hostmode_in
pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
/* Reset RC */
+ usleep_range(3000, 5000);
pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
- udelay(1000);
-+ usleep_range(1000, 2000);
++ msleep(50);
pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
BCMA_CORE_PCI_CTL_RST_OE);
-@@ -452,6 +452,8 @@ void __devinit bcma_core_pci_hostmode_in
+@@ -452,6 +457,8 @@ void __devinit bcma_core_pci_hostmode_in
pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
BCMA_SOC_PCI_MEM_SZ - 1;
pci_membase_1G = BCMA_SOC_PCIE_DMA_H32;
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
tmp | BCMA_SOC_PCI_MEM);
-@@ -459,6 +461,8 @@ void __devinit bcma_core_pci_hostmode_in
+@@ -459,6 +466,8 @@ void __devinit bcma_core_pci_hostmode_in
pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM;
pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM +
BCMA_SOC_PCI_MEM_SZ - 1;
pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32;
pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG;
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
-@@ -481,7 +485,7 @@ void __devinit bcma_core_pci_hostmode_in
+@@ -481,10 +490,21 @@ void __devinit bcma_core_pci_hostmode_in
* before issuing configuration requests to PCI Express
* devices.
*/
bcma_core_pci_enable_crs(pc);
-@@ -501,7 +505,7 @@ void __devinit bcma_core_pci_hostmode_in
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) {
++ u16 val16;
++ bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ val16 |= (2 << 5); /* Max payload size of 512 */
++ val16 |= (2 << 12); /* MRRS 512 */
++ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ }
++
+ /* Enable PCI bridge BAR0 memory & master access */
+ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
+@@ -501,7 +521,7 @@ void __devinit bcma_core_pci_hostmode_in
set_io_port_base(pc_host->pci_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
register_pci_controller(&pc_host->pci_controller);
return;
}
-@@ -534,7 +538,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_
+@@ -534,7 +554,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_
static void bcma_core_pci_fixup_addresses(struct pci_dev *dev)
{
struct resource *res;
if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
/* This is not a device on the PCI-core bridge. */
-@@ -547,8 +551,12 @@ static void bcma_core_pci_fixup_addresse
+@@ -547,8 +567,12 @@ static void bcma_core_pci_fixup_addresse
for (pos = 0; pos < 6; pos++) {
res = &dev->resource[pos];
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses);
+@@ -569,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
+ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+ /* Fix up interrupt lines */
+- dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ dev->irq = bcma_core_irq(pc_host->pdev->core);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+ return 0;
+@@ -588,6 +612,6 @@ int bcma_core_pci_pcibios_map_irq(const
+
+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ pci_ops);
+- return bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ return bcma_core_irq(pc_host->pdev->core);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -77,8 +77,8 @@ static void bcma_host_pci_write32(struct
static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
-@@ -272,6 +273,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
+@@ -272,7 +273,9 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
{ 0, },
+ };
--- a/drivers/bcma/host_soc.c
+++ b/drivers/bcma/host_soc.c
@@ -143,7 +143,7 @@ static void bcma_host_soc_awrite32(struc
#include <linux/bcma/bcma.h>
#include <linux/slab.h>
-@@ -80,6 +81,18 @@ struct bcma_device *bcma_find_core(struc
+@@ -80,6 +81,37 @@ struct bcma_device *bcma_find_core(struc
}
EXPORT_SYMBOL_GPL(bcma_find_core);
+ }
+ return NULL;
+}
++
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
+
static void bcma_release_core_dev(struct device *dev)
{
struct bcma_device *core = container_of(dev, struct bcma_device, dev);
-@@ -136,6 +149,33 @@ static int bcma_register_cores(struct bc
+@@ -107,6 +139,11 @@ static int bcma_register_cores(struct bc
+ continue;
+ }
+
++ /* Only first GMAC core on BCM4706 is connected and working */
++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++ core->core_unit > 0)
++ continue;
++
+ core->dev.release = bcma_release_core_dev;
+ core->dev.bus = &bcma_bus_type;
+ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
+@@ -136,6 +173,41 @@ static int bcma_register_cores(struct bc
dev_id++;
}
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++ if (bus->drv_cc.pflash.present) {
++ err = platform_device_register(&bcma_pflash_dev);
++ if (err)
++ bcma_err(bus, "Error registering parallel flash\n");
++ }
++#endif
++
+#ifdef CONFIG_BCMA_SFLASH
+ if (bus->drv_cc.sflash.present) {
+ err = platform_device_register(&bcma_sflash_dev);
return 0;
}
-@@ -148,6 +188,8 @@ static void bcma_unregister_cores(struct
+@@ -148,6 +220,8 @@ static void bcma_unregister_cores(struct
if (core->dev_registered)
device_unregister(&core->dev);
}
}
int __devinit bcma_bus_register(struct bcma_bus *bus)
-@@ -166,6 +208,20 @@ int __devinit bcma_bus_register(struct b
+@@ -166,6 +240,20 @@ int __devinit bcma_bus_register(struct b
return -1;
}
/* Init CC core */
core = bcma_find_core(bus, bcma_cc_core_id(bus));
if (core) {
-@@ -181,10 +237,17 @@ int __devinit bcma_bus_register(struct b
+@@ -181,10 +269,17 @@ int __devinit bcma_bus_register(struct b
}
/* Init PCIE core */
- core = bcma_find_core(bus, BCMA_CORE_PCIE);
+ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0);
-+ if (core) {
+ if (core) {
+- bus->drv_pci.core = core;
+- bcma_core_pci_init(&bus->drv_pci);
+ bus->drv_pci[0].core = core;
+ bcma_core_pci_init(&bus->drv_pci[0]);
+ }
+
+ /* Init PCIE core */
+ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1);
- if (core) {
-- bus->drv_pci.core = core;
-- bcma_core_pci_init(&bus->drv_pci);
++ if (core) {
+ bus->drv_pci[1].core = core;
+ bcma_core_pci_init(&bus->drv_pci[1]);
}
/* Init GBIT MAC COMMON core */
-@@ -194,13 +257,6 @@ int __devinit bcma_bus_register(struct b
+@@ -194,13 +289,6 @@ int __devinit bcma_bus_register(struct b
bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn);
}
/* Register found cores */
bcma_register_cores(bus);
-@@ -211,7 +267,17 @@ int __devinit bcma_bus_register(struct b
+@@ -211,7 +299,24 @@ int __devinit bcma_bus_register(struct b
void bcma_bus_unregister(struct bcma_bus *bus)
{
+ struct bcma_device *cores[3];
++ int err;
++
++ err = bcma_gpio_unregister(&bus->drv_cc);
++ if (err == -EBUSY)
++ bcma_err(bus, "Some GPIOs are still in use.\n");
++ else if (err)
++ bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
+
+ cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+ cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
}
int __init bcma_bus_early_register(struct bcma_bus *bus,
-@@ -248,18 +314,18 @@ int __init bcma_bus_early_register(struc
+@@ -248,18 +353,18 @@ int __init bcma_bus_early_register(struc
return -1;
}
}
bcma_info(bus, "Early bus registered\n");
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -84,6 +84,8 @@ static const struct bcma_device_id_name
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
+ { BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_PCIE2, "PCIe Gen2" },
++ { BCMA_CORE_ARM_CR4, "ARM CR4" },
+ { BCMA_CORE_DEFAULT, "Default" },
+ };
+
+@@ -137,19 +139,19 @@ static void bcma_scan_switch_core(struct
+ addr);
+ }
+
+-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = readl(*eromptr);
+ (*eromptr)++;
+ return ent;
+ }
+
+-static void bcma_erom_push_ent(u32 **eromptr)
++static void bcma_erom_push_ent(u32 __iomem **eromptr)
+ {
+ (*eromptr)--;
+ }
+
+-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -159,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+ return ent;
+ }
+
+-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+ }
+
+-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+@@ -175,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b
+ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+ }
+
+-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent;
+ while (1) {
+@@ -189,7 +191,7 @@ static void bcma_erom_skip_component(str
+ bcma_erom_push_ent(eromptr);
+ }
+
+-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -199,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct
+ return ent;
+ }
+
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ u32 type, u8 port)
+ {
+ u32 addrl, addrh, sizel, sizeh = 0;
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
-@@ -507,7 +507,9 @@ static bool bcma_sprom_onchip_available(
+@@ -72,12 +72,12 @@ fail:
+ * R/W ops.
+ **************************************************/
+
+-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
++ size_t words)
+ {
+ int i;
+- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+- sprom[i] = bcma_read16(bus->drv_cc.core,
+- offset + (i * 2));
++ for (i = 0; i < words; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
+ }
+
+ /**************************************************
+@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
+ return t[crc ^ data];
+ }
+
+-static u8 bcma_sprom_crc(const u16 *sprom)
++static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
+ {
+ int word;
+ u8 crc = 0xFF;
+
+- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ for (word = 0; word < words - 1; word++) {
+ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+ }
+
+-static int bcma_sprom_check_crc(const u16 *sprom)
++static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
+ {
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+- crc = bcma_sprom_crc(sprom);
+- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ crc = bcma_sprom_crc(sprom, words);
++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
+ return 0;
+ }
+
+-static int bcma_sprom_valid(const u16 *sprom)
++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
++ size_t words)
+ {
+ u16 revision;
+ int err;
+
+- err = bcma_sprom_check_crc(sprom);
++ err = bcma_sprom_check_crc(sprom, words);
+ if (err)
+ return err;
+
+- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+- if (revision != 8 && revision != 9) {
++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9 && revision != 10) {
+ pr_err("Unsupported SPROM revision: %d\n", revision);
+ return -ENOENT;
+ }
+
++ bus->sprom.revision = revision;
++ bcma_debug(bus, "Found SPROM revision %d\n", revision);
++
+ return 0;
+ }
+
+@@ -208,15 +212,13 @@ static void bcma_sprom_extract_r8(struct
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(bus->sprom.core_pwr_info));
+
+- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+- SSB_SPROM_REVISION_REV;
+-
+ for (i = 0; i < 3; i++) {
+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
+ }
+
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
+
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ SSB_SPROM4_TXPID2G0_SHIFT);
+@@ -501,13 +503,15 @@ static bool bcma_sprom_onchip_available(
+ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
+-
++ case BCMA_CHIP_ID_BCM43142:
+ case BCMA_CHIP_ID_BCM43224:
+ case BCMA_CHIP_ID_BCM43225:
/* for these chips OTP is always available */
present = true;
break;
present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT;
break;
default:
-@@ -593,8 +595,11 @@ int bcma_sprom_get(struct bcma_bus *bus)
+@@ -547,7 +551,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ {
+ u16 offset = BCMA_CC_SPROM;
+ u16 *sprom;
+- int err = 0;
++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
++ SSB_SPROMSIZE_WORDS_R10, };
++ int i, err = 0;
+
+ if (!bus->drv_cc.core)
+ return -EOPNOTSUPP;
+@@ -576,29 +582,37 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ }
+ }
+
+- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+- GFP_KERNEL);
+- if (!sprom)
+- return -ENOMEM;
+-
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
+
+ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
+- bcma_sprom_read(bus, offset, sprom);
++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
++ size_t words = sprom_sizes[i];
++
++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, offset, sprom, words);
++ err = bcma_sprom_valid(bus, sprom, words);
++ if (!err)
++ break;
++
++ kfree(sprom);
++ }
+
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
- err = bcma_sprom_valid(sprom);
+- err = bcma_sprom_valid(sprom);
- if (err)
+- goto out;
+-
+- bcma_sprom_extract_r8(bus, sprom);
+ if (err) {
-+ bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
- goto out;
++ } else {
++ bcma_sprom_extract_r8(bus, sprom);
++ kfree(sprom);
+ }
- bcma_sprom_extract_r8(bus, sprom);
-
+-out:
+- kfree(sprom);
+ return err;
+ }
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -10,7 +10,7 @@
struct bcma_device;
struct bcma_bus;
-@@ -134,6 +134,7 @@ struct bcma_host_ops {
+@@ -134,12 +134,17 @@ struct bcma_host_ops {
#define BCMA_CORE_I2S 0x834
#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
-+#define BCMA_CORE_ARM_CR4 0x83e
++#define BCMA_CORE_PHY_AC 0x83B
++#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
++#define BCMA_CORE_USB30_DEV 0x83D
++#define BCMA_CORE_ARM_CR4 0x83E
#define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
-@@ -157,6 +158,7 @@ struct bcma_host_ops {
+
+ /* Chip IDs of PCIe devices */
+ #define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43142 43142
+ #define BCMA_CHIP_ID_BCM43224 43224
+ #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
+ #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
+@@ -157,6 +162,7 @@ struct bcma_host_ops {
/* Chip IDs of SoCs */
#define BCMA_CHIP_ID_BCM4706 0x5300
#define BCMA_CHIP_ID_BCM4716 0x4716
#define BCMA_PKG_ID_BCM4716 8
#define BCMA_PKG_ID_BCM4717 9
-@@ -166,7 +168,11 @@ struct bcma_host_ops {
+@@ -166,7 +172,65 @@ struct bcma_host_ops {
#define BCMA_CHIP_ID_BCM4749 0x4749
#define BCMA_CHIP_ID_BCM5356 0x5356
#define BCMA_CHIP_ID_BCM5357 0x5357
+#define BCMA_PKG_ID_BCM5357 11
#define BCMA_CHIP_ID_BCM53572 53572
+#define BCMA_PKG_ID_BCM47188 9
++
++/* Board types (on PCI usually equals to the subsystem dev id) */
++/* BCM4313 */
++#define BCMA_BOARD_TYPE_BCM94313BU 0X050F
++#define BCMA_BOARD_TYPE_BCM94313HM 0X0510
++#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511
++#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C
++/* BCM4716 */
++#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD
++/* BCM43224 */
++#define BCMA_BOARD_TYPE_BCM943224X21 0X056E
++#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1
++#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9
++#define BCMA_BOARD_TYPE_BCM943224M93 0X008B
++#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090
++#define BCMA_BOARD_TYPE_BCM943224X16 0X0093
++#define BCMA_BOARD_TYPE_BCM94322X9 0X008D
++#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E
++/* BCM43228 */
++#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540
++#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541
++#define BCMA_BOARD_TYPE_BCM943228BU 0X0542
++#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543
++#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544
++#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545
++#define BCMA_BOARD_TYPE_BCM943228SD 0X0573
++/* BCM4331 */
++#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6
++#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC
++#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED
++#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5
++#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4
++#define BCMA_BOARD_TYPE_BCM94331BU 0X0523
++#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524
++#define BCMA_BOARD_TYPE_BCM94331MC 0X0525
++#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527
++#define BCMA_BOARD_TYPE_BCM94331HM 0X0574
++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B
++#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9
++#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6
++#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA
++/* BCM53572 */
++#define BCMA_BOARD_TYPE_BCM953572BU 0X058D
++#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E
++#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F
++#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590
++/* BCM43142 */
++#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0
struct bcma_device {
struct bcma_bus *bus;
-@@ -251,7 +257,7 @@ struct bcma_bus {
+@@ -251,7 +315,7 @@ struct bcma_bus {
u8 num;
struct bcma_drv_cc drv_cc;
struct bcma_drv_mips drv_mips;
struct bcma_drv_gmac_cmn drv_gmac_cmn;
-@@ -345,6 +351,7 @@ extern void bcma_core_set_clockmode(stru
+@@ -345,6 +409,7 @@ extern void bcma_core_set_clockmode(stru
enum bcma_clkmode clkmode);
extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
bool on);
/** ChipCommon core registers. **/
#define BCMA_CC_ID 0x0000
#define BCMA_CC_ID_ID 0x0000FFFF
+@@ -24,7 +27,7 @@
+ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
+ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
+ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
+-#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */
++#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */
+ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
+ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
+ #define BCMA_PLLTYPE_NONE 0x00000000
@@ -100,6 +103,8 @@
#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
-@@ -325,6 +356,60 @@
+@@ -299,6 +330,8 @@
+ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
+ #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+@@ -324,7 +357,66 @@
+ #define BCMA_CC_REGCTL_DATA 0x065C
#define BCMA_CC_PLLCTL_ADDR 0x0660
#define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
+/* NAND flash MLC controller registers (corerev >= 38) */
+#define BCMA_CC_NAND_REVISION 0x0C00
/* Divider allocation in 4716/47162/5356 */
#define BCMA_CC_PMU5_MAINPLL_CPU 1
-@@ -415,6 +500,13 @@
+@@ -350,6 +442,23 @@
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
+
++/* PMU rev 15 */
++#define BCMA_CC_PMU15_PLL_PLLCTL0 0
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
++
+ /* ALP clock on pre-PMU chips */
+ #define BCMA_CC_PMU_ALP_CLOCK 20000000
+ /* HT clock for systems with PMU-enabled chipcommon */
+@@ -415,6 +524,44 @@
/* 4313 Chip specific ChipControl register bits */
#define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */
+#define BCMA_CHIPCTL_5357_NFLASH BIT(16)
+#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
+#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
++
++#define BCMA_RES_4314_LPLDO_PU BIT(0)
++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
++#define BCMA_RES_4314_PMU_BG_PU BIT(2)
++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
++#define BCMA_RES_4314_CLDO_PU BIT(5)
++#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
++#define BCMA_RES_4314_WL_PMU_PU BIT(7)
++#define BCMA_RES_4314_LNLDO_PU BIT(8)
++#define BCMA_RES_4314_LDO3P3_PU BIT(9)
++#define BCMA_RES_4314_OTP_PU BIT(10)
++#define BCMA_RES_4314_XTAL_PU BIT(11)
++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
++#define BCMA_RES_4314_LQ_AVAIL BIT(13)
++#define BCMA_RES_4314_LOGIC_RET BIT(14)
++#define BCMA_RES_4314_MEM_SLEEP BIT(15)
++#define BCMA_RES_4314_MACPHY_RET BIT(16)
++#define BCMA_RES_4314_WL_CORE_READY BIT(17)
++#define BCMA_RES_4314_ILP_REQ BIT(18)
++#define BCMA_RES_4314_ALP_AVAIL BIT(19)
++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
++#define BCMA_RES_4314_RADIO_PU BIT(23)
++#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
++#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
++#define BCMA_RES_4314_RX_LDO_PU BIT(26)
++#define BCMA_RES_4314_TX_LDO_PU BIT(27)
++#define BCMA_RES_4314_HT_AVAIL BIT(28)
++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
+
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
-@@ -425,11 +517,35 @@ struct bcma_chipcommon_pmu {
+@@ -425,11 +572,36 @@ struct bcma_chipcommon_pmu {
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash {
+ u32 size;
+
+ struct mtd_info *mtd;
++ void *priv;
+};
+#endif
+
struct bcma_serial_port {
void *regs;
unsigned long clockspeed;
-@@ -445,15 +561,30 @@ struct bcma_drv_cc {
+@@ -445,15 +617,30 @@ struct bcma_drv_cc {
u32 capabilities;
u32 capabilities_ext;
u8 setup_done:1;
};
/* Register access */
-@@ -470,14 +601,16 @@ struct bcma_drv_cc {
+@@ -470,14 +657,16 @@ struct bcma_drv_cc {
bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
-@@ -490,9 +623,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+@@ -490,9 +679,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
u32 value);
+@@ -504,4 +696,6 @@ extern void bcma_chipco_regctl_maskset(s
+ u32 offset, u32 mask, u32 set);
+ extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
+
++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
++
+ #endif /* LINUX_BCMA_DRIVER_CC_H_ */
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -35,13 +35,15 @@ struct bcma_device;
+@@ -28,6 +28,7 @@
+ #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048
+ #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0
+
++#define BCMA_MIPS_OOBSELINA74 0x004
+ #define BCMA_MIPS_OOBSELOUTA30 0x100
+
+ struct bcma_device;
+@@ -35,17 +36,24 @@ struct bcma_device;
struct bcma_drv_mips {
struct bcma_device *core;
u8 setup_done:1;
#ifdef CONFIG_BCMA_DRIVER_MIPS
extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
++
++extern unsigned int bcma_core_irq(struct bcma_device *core);
#else
static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
++
++static inline unsigned int bcma_core_irq(struct bcma_device *core)
++{
++ return 0;
++}
#endif
extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
+-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+-
+ #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
+--- a/include/linux/bcma/bcma_driver_pci.h
++++ b/include/linux/bcma/bcma_driver_pci.h
+@@ -179,6 +179,8 @@ struct pci_dev;
+ #define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */
+ #define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */
+
++#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8
++
+ /* PCIE Root Capability Register bits (Host mode only) */
+ #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001
+
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -11,11 +11,13 @@
ARRAY_SIZE(wgt634u_devices));
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
-@@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS
+@@ -136,10 +136,15 @@ config SSB_DRIVER_MIPS
If unsure, say N
# Assumption: We are on embedded, if we compile the MIPS core.
config SSB_EMBEDDED
bool
+- depends on SSB_DRIVER_MIPS
++ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ default y
+
+ config SSB_DRIVER_EXTIF
@@ -160,4 +165,12 @@ config SSB_DRIVER_GIGE
If unsure, say N
#include "ssb_private.h"
-@@ -280,10 +282,76 @@ static void calc_fast_powerup_delay(stru
+@@ -280,13 +282,79 @@ static void calc_fast_powerup_delay(stru
cc->fast_pwrup_delay = tmp;
}
+
if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
++ ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
@@ -297,6 +365,11 @@ void ssb_chipcommon_init(struct ssb_chip
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
/* Turn off UART clock before switching clocksource. */
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -346,6 +346,8 @@ static void ssb_pmu_pll_init(struct ssb_
+@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set PDIV in PLL control 0. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
+ return;
+ }
+
+- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+- (crystalfreq / 1000), (crystalfreq % 1000));
++ ssb_info("Programming PLL to %u.%03u MHz\n",
++ crystalfreq / 1000, crystalfreq % 1000);
+
+ /* First turn the PLL off. */
+ switch (bus->chip_id) {
+@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
+ }
+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++ ssb_emerg("Failed to turn the PLL off!\n");
+
+ /* Set p1div and p2div. */
+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
+@@ -346,10 +346,11 @@ static void ssb_pmu_pll_init(struct ssb_
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
}
break;
+ case 43222:
+ break;
default:
- ssb_printk(KERN_ERR PFX
- "ERROR: PLL init unknown for device %04X\n",
-@@ -434,6 +436,7 @@ static void ssb_pmu_resources_init(struc
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PLL init unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PLL init unknown for device %04X\n",
++ bus->chip_id);
+ }
+ }
+
+@@ -434,6 +435,7 @@ static void ssb_pmu_resources_init(struc
min_msk = 0xCBB;
break;
case 0x4322:
/* We keep the default settings:
* min_msk = 0xCBB
* max_msk = 0x7FFFF
-@@ -615,6 +618,33 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
+@@ -469,9 +471,8 @@ static void ssb_pmu_resources_init(struc
+ max_msk = 0xFFFFF;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU resource config unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU resource config unknown for device %04X\n",
++ bus->chip_id);
+ }
+
+ if (updown_tab) {
+@@ -523,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+
+- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+- cc->pmu.rev, pmucap);
++ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
++ cc->pmu.rev, pmucap);
+
+ if (cc->pmu.rev == 1)
+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+@@ -615,6 +616,32 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
+ case 0x5354:
+ ssb_pmu_get_alp_clock_clk0(cc);
+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PMU alp clock unknown for device %04X\n",
-+ bus->chip_id);
++ ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+}
u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
{
struct ssb_bus *bus = cc->dev->bus;
-@@ -645,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+@@ -624,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi
+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ return 240000000;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU cpu clock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
++ bus->chip_id);
+ return 0;
+ }
+ }
+@@ -639,9 +665,52 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ case 0x5354:
+ return 120000000;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "ERROR: PMU controlclock unknown for device %04X\n",
+- bus->chip_id);
++ ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
++ bus->chip_id);
return 0;
}
}
+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ break;
+ case 43222:
-+ /* TODO: BCM43222 requires updating PLLs too */
-+ return;
++ if (spuravoid == 1) {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
++ } else {
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
++ }
++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -0,0 +1,18 @@
+@@ -0,0 +1,166 @@
+/*
+ * Sonics Silicon Backplane
+ * ChipCommon serial flash interface
+
+#include "ssb_private.h"
+
++static struct resource ssb_sflash_resource = {
++ .name = "ssb_sflash",
++ .start = SSB_FLASH2,
++ .end = 0,
++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device ssb_sflash_dev = {
++ .name = "ssb_sflash",
++ .resource = &ssb_sflash_resource,
++ .num_resources = 1,
++};
++
++struct ssb_sflash_tbl_e {
++ char *name;
++ u32 id;
++ u32 blocksize;
++ u16 numblocks;
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
++ { "M25P20", 0x11, 0x10000, 4, },
++ { "M25P40", 0x12, 0x10000, 8, },
++
++ { "M25P16", 0x14, 0x10000, 32, },
++ { "M25P32", 0x15, 0x10000, 64, },
++ { "M25P64", 0x16, 0x10000, 128, },
++ { "M25FL128", 0x17, 0x10000, 256, },
++ { 0 },
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
++ { "SST25WF512", 1, 0x1000, 16, },
++ { "SST25VF512", 0x48, 0x1000, 16, },
++ { "SST25WF010", 2, 0x1000, 32, },
++ { "SST25VF010", 0x49, 0x1000, 32, },
++ { "SST25WF020", 3, 0x1000, 64, },
++ { "SST25VF020", 0x43, 0x1000, 64, },
++ { "SST25WF040", 4, 0x1000, 128, },
++ { "SST25VF040", 0x44, 0x1000, 128, },
++ { "SST25VF040B", 0x8d, 0x1000, 128, },
++ { "SST25WF080", 5, 0x1000, 256, },
++ { "SST25VF080B", 0x8e, 0x1000, 256, },
++ { "SST25VF016", 0x41, 0x1000, 512, },
++ { "SST25VF032", 0x4a, 0x1000, 1024, },
++ { "SST25VF064", 0x4b, 0x1000, 2048, },
++ { 0 },
++};
++
++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
++ { "AT45DB011", 0xc, 256, 512, },
++ { "AT45DB021", 0x14, 256, 1024, },
++ { "AT45DB041", 0x1c, 256, 2048, },
++ { "AT45DB081", 0x24, 256, 4096, },
++ { "AT45DB161", 0x2c, 512, 4096, },
++ { "AT45DB321", 0x34, 512, 8192, },
++ { "AT45DB642", 0x3c, 1024, 8192, },
++ { 0 },
++};
++
++static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
++{
++ int i;
++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
++ SSB_CHIPCO_FLASHCTL_START | opcode);
++ for (i = 0; i < 1000; i++) {
++ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) &
++ SSB_CHIPCO_FLASHCTL_BUSY))
++ return;
++ cpu_relax();
++ }
++ pr_err("SFLASH control command failed (timeout)!\n");
++}
++
+/* Initialize serial flash access */
+int ssb_sflash_init(struct ssb_chipcommon *cc)
+{
++ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
++ const struct ssb_sflash_tbl_e *e;
++ u32 id, id2;
++
++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++ case SSB_CHIPCO_FLASHT_STSER:
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
++
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++
++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
++ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
++
++ switch (id) {
++ case 0xbf:
++ for (e = ssb_sflash_sst_tbl; e->name; e++) {
++ if (e->id == id2)
++ break;
++ }
++ break;
++ case 0x13:
++ return -ENOTSUPP;
++ default:
++ for (e = ssb_sflash_st_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ break;
++ }
++ if (!e->name) {
++ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n",
++ id, id2);
++ return -ENOTSUPP;
++ }
++
++ break;
++ case SSB_CHIPCO_FLASHT_ATSER:
++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
++
++ for (e = ssb_sflash_at_tbl; e->name; e++) {
++ if (e->id == id)
++ break;
++ }
++ if (!e->name) {
++ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n",
++ id);
++ return -ENOTSUPP;
++ }
++
++ break;
++ default:
++ pr_err("Unsupported flash type\n");
++ return -ENOTSUPP;
++ }
++
++ sflash->window = SSB_FLASH2;
++ sflash->blocksize = e->blocksize;
++ sflash->numblocks = e->numblocks;
++ sflash->size = sflash->blocksize * sflash->numblocks;
++ sflash->present = true;
++
++ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
++ e->name, e->blocksize, e->numblocks);
++
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
++ sflash->size;
++ ssb_sflash_dev.dev.platform_data = sflash;
++
+ pr_err("Serial flash support is not implemented yet!\n");
+
+ return -ENOTSUPP;
}
--- /dev/null
+++ b/drivers/ssb/driver_gpio.c
-@@ -0,0 +1,176 @@
+@@ -0,0 +1,210 @@
+/*
+ * Sonics Silicon Backplane
+ * GPIO driver
+ ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
+}
+
++static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ return ssb_mips_irq(bus->chipco.dev) + 2;
++ else
++ return -EINVAL;
++}
++
+static int ssb_gpio_chipco_init(struct ssb_bus *bus)
+{
+ struct gpio_chip *chip = &bus->gpio;
+ chip->set = ssb_gpio_chipco_set_value;
+ chip->direction_input = ssb_gpio_chipco_direction_input;
+ chip->direction_output = ssb_gpio_chipco_direction_output;
++ chip->to_irq = ssb_gpio_chipco_to_irq;
+ chip->ngpio = 16;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+ return 0;
+}
+
++static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
++
++ if (bus->bustype == SSB_BUSTYPE_SSB)
++ return ssb_mips_irq(bus->extif.dev) + 2;
++ else
++ return -EINVAL;
++}
++
+static int ssb_gpio_extif_init(struct ssb_bus *bus)
+{
+ struct gpio_chip *chip = &bus->gpio;
+ chip->set = ssb_gpio_extif_set_value;
+ chip->direction_input = ssb_gpio_extif_direction_input;
+ chip->direction_output = ssb_gpio_extif_direction_output;
++ chip->to_irq = ssb_gpio_extif_to_irq;
+ chip->ngpio = 5;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+
+ return -1;
+}
++
++int ssb_gpio_unregister(struct ssb_bus *bus)
++{
++ if (ssb_chipco_available(&bus->chipco) ||
++ ssb_extif_available(&bus->extif)) {
++ return gpiochip_remove(&bus->gpio);
++ } else {
++ SSB_WARN_ON(1);
++ }
++
++ return -1;
++}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
-@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
+@@ -10,6 +10,7 @@
+
+ #include <linux/ssb/ssb.h>
+
++#include <linux/mtd/physmap.h>
+ #include <linux/serial.h>
+ #include <linux/serial_core.h>
+ #include <linux/serial_reg.h>
+@@ -17,6 +18,25 @@
+
+ #include "ssb_private.h"
+
++static const char * const part_probes[] = { "bcm47xxpart", NULL };
++
++static struct physmap_flash_data ssb_pflash_data = {
++ .part_probe_types = part_probes,
++};
++
++static struct resource ssb_pflash_resource = {
++ .name = "ssb_pflash",
++ .flags = IORESOURCE_MEM,
++};
++
++struct platform_device ssb_pflash_dev = {
++ .name = "physmap-flash",
++ .dev = {
++ .platform_data = &ssb_pflash_data,
++ },
++ .resource = &ssb_pflash_resource,
++ .num_resources = 1,
++};
+
+ static inline u32 mips_read32(struct ssb_mipscore *mcore,
+ u16 offset)
+@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d
+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
+ ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ }
+- ssb_dprintk(KERN_INFO PFX
+- "set_irq: core 0x%04x, irq %d => %d\n",
+- dev->id.coreid, oldirq+2, irq+2);
++ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
++ dev->id.coreid, oldirq+2, irq+2);
+ }
+
+ static void print_irq(struct ssb_device *dev, unsigned int irq)
+ {
+- int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+- ssb_dprintk(KERN_INFO PFX
+- "core 0x%04x, irq :", dev->id.coreid);
+- for (i = 0; i <= 6; i++) {
+- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+- }
+- ssb_dprintk("\n");
++ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
++ dev->id.coreid,
++ irq_name[0], irq == 0 ? "*" : " ",
++ irq_name[1], irq == 1 ? "*" : " ",
++ irq_name[2], irq == 2 ? "*" : " ",
++ irq_name[3], irq == 3 ? "*" : " ",
++ irq_name[4], irq == 4 ? "*" : " ",
++ irq_name[5], irq == 5 ? "*" : " ",
++ irq_name[6], irq == 6 ? "*" : " ");
+ }
+
+ static void dump_irq(struct ssb_bus *bus)
+@@ -178,9 +199,9 @@ static void ssb_mips_serial_init(struct
{
struct ssb_bus *bus = mcore->dev->bus;
mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
else
mcore->nr_serial_ports = 0;
-@@ -191,10 +191,11 @@ static void ssb_mips_flash_detect(struct
+@@ -189,32 +210,43 @@ static void ssb_mips_serial_init(struct
+ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
+ {
struct ssb_bus *bus = mcore->dev->bus;
++ struct ssb_pflash *pflash = &mcore->pflash;
/* When there is no chipcommon on the bus there is 4MB flash */
- if (!bus->chipco.dev) {
- mcore->flash_buswidth = 2;
- mcore->flash_window = SSB_FLASH1;
- mcore->flash_window_size = SSB_FLASH1_SZ;
+- return;
+ if (!ssb_chipco_available(&bus->chipco)) {
-+ mcore->pflash.present = true;
-+ mcore->pflash.buswidth = 2;
-+ mcore->pflash.window = SSB_FLASH1;
-+ mcore->pflash.window_size = SSB_FLASH1_SZ;
- return;
++ pflash->present = true;
++ pflash->buswidth = 2;
++ pflash->window = SSB_FLASH1;
++ pflash->window_size = SSB_FLASH1_SZ;
++ goto ssb_pflash;
}
-@@ -202,17 +203,19 @@ static void ssb_mips_flash_detect(struct
+ /* There is ChipCommon, so use it to read info about flash */
switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
case SSB_CHIPCO_FLASHT_STSER:
case SSB_CHIPCO_FLASHT_ATSER:
pr_debug("Found parallel flash\n");
- mcore->flash_window = SSB_FLASH2;
- mcore->flash_window_size = SSB_FLASH2_SZ;
-+ mcore->pflash.present = true;
-+ mcore->pflash.window = SSB_FLASH2;
-+ mcore->pflash.window_size = SSB_FLASH2_SZ;
++ pflash->present = true;
++ pflash->window = SSB_FLASH2;
++ pflash->window_size = SSB_FLASH2_SZ;
if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
& SSB_CHIPCO_CFG_DS16) == 0)
- mcore->flash_buswidth = 1;
-+ mcore->pflash.buswidth = 1;
++ pflash->buswidth = 1;
else
- mcore->flash_buswidth = 2;
-+ mcore->pflash.buswidth = 2;
++ pflash->buswidth = 2;
break;
}
++
++ssb_pflash:
++ if (pflash->present) {
++ ssb_pflash_data.width = pflash->buswidth;
++ ssb_pflash_resource.start = pflash->window;
++ ssb_pflash_resource.end = pflash->window + pflash->window_size;
++ }
}
-@@ -225,9 +228,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+
+ u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
+@@ -225,9 +257,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
return ssb_pmu_get_cpu_clock(&bus->chipco);
ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
} else
return 0;
-@@ -263,9 +266,9 @@ void ssb_mipscore_init(struct ssb_mipsco
+@@ -255,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ if (!mcore->dev)
+ return; /* We don't have a MIPS core */
+
+- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
++ ssb_dbg("Initializing MIPS core...\n");
+
+ bus = mcore->dev->bus;
+ hz = ssb_clockspeed(bus);
+@@ -263,9 +295,9 @@ void ssb_mipscore_init(struct ssb_mipsco
hz = 100000000;
ns = 1000000000 / hz;
ssb_chipco_timing_init(&bus->chipco, ns);
/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
+@@ -303,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ break;
+ }
+ }
+- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
++ ssb_dbg("after irq reconfiguration\n");
+ dump_irq(bus);
+
+ ssb_mips_serial_init(mcore);
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
+ return -ENODEV;
+ }
+
+- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+- pci_name(d));
++ ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+
+ /* Fix up interrupt lines */
+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+ return;
+
+- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
++ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+
+ /* Enable PCI bridge bus mastering and memory space */
+ pci_set_master(dev);
+ if (pcibios_enable_device(dev, ~0) < 0) {
+- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
++ ssb_err("PCI: SSB bridge enable failed\n");
+ return;
+ }
+
+@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
+
+ /* Make sure our latency is high enough to handle the devices behind us */
+ lat = 168;
+- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+- pci_name(dev), lat);
++ ssb_info("PCI: Fixing latency timer of device %s to %u\n",
++ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ }
+ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
+@@ -323,7 +322,7 @@ static void __devinit ssb_pcicore_init_h
+ return;
+ extpci_core = pc;
+
+- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
++ ssb_dbg("PCIcore in host mode found\n");
+ /* Reset devices on the external PCI bus */
+ val = SSB_PCICORE_CTL_RST_OE;
+ val |= SSB_PCICORE_CTL_CLK_OE;
+@@ -338,7 +337,7 @@ static void __devinit ssb_pcicore_init_h
+ udelay(1); /* Assertion time demanded by the PCI standard */
+
+ if (pc->dev->bus->has_cardbus_slot) {
+- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
++ ssb_dbg("CardBus slot detected\n");
+ pc->cardbusmode = 1;
+ /* GPIO 1 resets the bridge */
+ ssb_gpio_out(pc->dev->bus, 1, 1);
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -4,11 +4,13 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/ssb/ssb_driver_pci.h>
-@@ -32,6 +34,39 @@ int ssb_watchdog_timer_set(struct ssb_bu
+@@ -32,6 +34,38 @@ int ssb_watchdog_timer_set(struct ssb_bu
}
EXPORT_SYMBOL(ssb_watchdog_timer_set);
+ bus->busnumber, &wdt,
+ sizeof(wdt));
+ if (IS_ERR(pdev)) {
-+ ssb_dprintk(KERN_INFO PFX
-+ "can not register watchdog device, err: %li\n",
-+ PTR_ERR(pdev));
++ ssb_dbg("can not register watchdog device, err: %li\n",
++ PTR_ERR(pdev));
+ return PTR_ERR(pdev);
+ }
+
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_gige.h>
-@@ -433,6 +434,11 @@ static void ssb_devices_unregister(struc
+@@ -274,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
+
+ err = sdrv->probe(sdev, &sdev->id);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+- dev_name(sdev->dev));
++ ssb_err("Failed to thaw device %s\n",
++ dev_name(sdev->dev));
+ result = err;
+ }
+ ssb_device_put(sdev);
+@@ -433,10 +434,23 @@ static void ssb_devices_unregister(struc
if (sdev->dev)
device_unregister(sdev->dev);
}
}
void ssb_bus_unregister(struct ssb_bus *bus)
-@@ -561,6 +567,8 @@ static int __devinit ssb_attach_queued_b
+ {
++ int err;
++
++ err = ssb_gpio_unregister(bus);
++ if (err == -EBUSY)
++ ssb_dbg("Some GPIOs are still in use\n");
++ else if (err)
++ ssb_dbg("Can not unregister GPIO driver: %i\n", err);
++
+ ssb_buses_lock();
+ ssb_devices_unregister(bus);
+ list_del(&bus->list);
+@@ -482,8 +496,7 @@ static int ssb_devices_register(struct s
+
+ devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
+ if (!devwrap) {
+- ssb_printk(KERN_ERR PFX
+- "Could not allocate device\n");
++ ssb_err("Could not allocate device\n");
+ err = -ENOMEM;
+ goto error;
+ }
+@@ -522,9 +535,7 @@ static int ssb_devices_register(struct s
+ sdev->dev = dev;
+ err = device_register(dev);
+ if (err) {
+- ssb_printk(KERN_ERR PFX
+- "Could not register %s\n",
+- dev_name(dev));
++ ssb_err("Could not register %s\n", dev_name(dev));
+ /* Set dev to NULL to not unregister
+ * dev on error unwinding. */
+ sdev->dev = NULL;
+@@ -534,6 +545,22 @@ static int ssb_devices_register(struct s
+ dev_idx++;
+ }
+
++#ifdef CONFIG_SSB_DRIVER_MIPS
++ if (bus->mipscore.pflash.present) {
++ err = platform_device_register(&ssb_pflash_dev);
++ if (err)
++ pr_err("Error registering parallel flash\n");
++ }
++#endif
++
++#ifdef CONFIG_SSB_SFLASH
++ if (bus->mipscore.sflash.present) {
++ err = platform_device_register(&ssb_sflash_dev);
++ if (err)
++ pr_err("Error registering serial flash\n");
++ }
++#endif
++
+ return 0;
+ error:
+ /* Unwind the already registered devices. */
+@@ -561,6 +588,8 @@ static int __devinit ssb_attach_queued_b
if (err)
goto error;
ssb_pcicore_init(&bus->pcicore);
ssb_bus_may_powerdown(bus);
err = ssb_devices_register(bus);
-@@ -796,7 +804,14 @@ static int __devinit ssb_bus_register(st
+@@ -796,7 +825,13 @@ static int __devinit ssb_bus_register(st
if (err)
goto err_pcmcia_exit;
ssb_chipcommon_init(&bus->chipco);
ssb_mipscore_init(&bus->mipscore);
+ err = ssb_gpio_init(bus);
+ if (err == -ENOTSUPP)
-+ ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n");
++ ssb_dbg("GPIO driver not activated\n");
+ else if (err)
-+ ssb_dprintk(KERN_ERR PFX
-+ "Error registering GPIO driver: %i\n", err);
++ ssb_dbg("Error registering GPIO driver: %i\n", err);
err = ssb_fetch_invariants(bus, get_invariants);
if (err) {
ssb_bus_may_powerdown(bus);
-@@ -1118,8 +1133,7 @@ static u32 ssb_tmslow_reject_bitmask(str
+@@ -847,11 +882,11 @@ int __devinit ssb_bus_pcibus_register(st
+
+ err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCI device %s\n", dev_name(&host_pci->dev));
++ ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
++ dev_name(&host_pci->dev));
+ } else {
+- ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+- " of SSB with error %d\n", err);
++ ssb_err("Failed to register PCI version of SSB with error %d\n",
++ err);
+ }
+
+ return err;
+@@ -872,8 +907,8 @@ int __devinit ssb_bus_pcmciabus_register
+
+ err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "PCMCIA device %s\n", pcmcia_dev->devname);
++ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
++ pcmcia_dev->devname);
+ }
+
+ return err;
+@@ -895,8 +930,8 @@ int __devinit ssb_bus_sdiobus_register(s
+
+ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+- "SDIO device %s\n", sdio_func_id(func));
++ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
++ sdio_func_id(func));
+ }
+
+ return err;
+@@ -915,8 +950,8 @@ int __devinit ssb_bus_ssbbus_register(st
+
+ err = ssb_bus_register(bus, get_invariants, baseaddr);
+ if (!err) {
+- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
+- "address 0x%08lX\n", baseaddr);
++ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
++ baseaddr);
+ }
+
+ return err;
+@@ -1118,8 +1153,7 @@ static u32 ssb_tmslow_reject_bitmask(str
case SSB_IDLOW_SSBREV_27: /* same here */
return SSB_TMSLOW_REJECT; /* this is a guess */
default:
}
return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
}
+@@ -1311,7 +1345,7 @@ out:
+ #endif
+ return err;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
++ ssb_err("Bus powerdown failed\n");
+ goto out;
+ }
+ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1334,7 +1368,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
++ ssb_err("Bus powerup failed\n");
+ return err;
+ }
+ EXPORT_SYMBOL(ssb_bus_powerup);
+@@ -1442,15 +1476,13 @@ static int __init ssb_modinit(void)
+
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+- "initialization failed\n");
++ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+ err = ssb_gige_init();
+ if (err) {
+- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
+- "driver initialization failed\n");
++ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
+ }
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return -ENODEV;
+ }
+
+@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
+ unsigned long flags;
+
+ #if SSB_VERBOSE_PCICORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ spin_lock_irqsave(&bus->bar_lock, flags);
+@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
+ return t[crc ^ data];
+ }
+
++static void sprom_get_mac(char *mac, const u16 *in)
++{
++ int i;
++ for (i = 0; i < 3; i++) {
++ *mac++ = in[i] >> 8;
++ *mac++ = in[i];
++ }
++}
++
+ static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
+ {
+ int word;
+@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
+ u32 spromctl;
+ u16 size = bus->sprom_size;
+
+- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
+ if (err)
+ goto err_ctlreg;
+@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
+ err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
+ if (err)
+ goto err_ctlreg;
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ mmiowb();
+ msleep(20);
+@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
+ if (err)
+ goto err_ctlreg;
+ msleep(500);
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+
+ return 0;
+ err_ctlreg:
+- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
++ ssb_err("Could not access SPROM control register.\n");
+ return err;
+ }
+
+@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
+ return (s8)gain;
+ }
+
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++ SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 loc[3];
+
+ if (out->revision == 3) /* rev 3 moved MAC */
+@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss
+ loc[1] = SSB_SPROM1_ET0MAC;
+ loc[2] = SSB_SPROM1_ET1MAC;
+ }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[0]) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
+ if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[1]) + i];
+- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
+- }
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(loc[2]) + i];
+- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
++ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
+ }
+ SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
+@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss
+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 1)
+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ SSB_SPROM1_BINF_CCODE_SHIFT);
+@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss
+ SSB_SPROM1_ITSSI_A_SHIFT);
+ SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
+ SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+- if (out->revision >= 2)
+- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+
+@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss
+ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_A,
+ SSB_SPROM1_AGAIN_A_SHIFT);
++ if (out->revision >= 2)
++ sprom_extract_r23(out, in);
+ }
+
+ /* Revs 4 5 and 8 have partially shared layout */
+@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss
+
+ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
+ {
+- int i;
+- u16 v;
+ u16 il0mac_offset;
+
+ if (out->revision == 4)
+ il0mac_offset = SSB_SPROM4_IL0MAC;
+ else
+ il0mac_offset = SSB_SPROM5_IL0MAC;
+- /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(il0mac_offset) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++
++ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
++
+ SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
+ SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 4) {
+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
+@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+- u16 v, o;
++ u16 o;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_
+ ARRAY_SIZE(out->core_pwr_info));
+
+ /* extract the MAC address */
+- for (i = 0; i < 3; i++) {
+- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+- }
++ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
++
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus
+ memset(out, 0, sizeof(*out));
+
+ out->revision = in[size - 1] & 0x00FF;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
++ ssb_dbg("SPROM revision %d detected\n", out->revision);
+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
+ memset(out->et1mac, 0xFF, 6);
+
+@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus
+ * number stored in the SPROM.
+ * Always extract r1. */
+ out->revision = 1;
+- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
++ ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ }
+
+ switch (out->revision) {
+@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus
+ sprom_extract_r8(out, in);
+ break;
+ default:
+- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+- " revision %d detected. Will extract"
+- " v1\n", out->revision);
++ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
++ out->revision);
+ out->revision = 1;
+ sprom_extract_r123(out, in);
+ }
+@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ u16 *buf;
+
+ if (!ssb_is_sprom_available(bus)) {
+- ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++ ssb_err("No SPROM available!\n");
+ return -ENODEV;
+ }
+ if (bus->chipco.dev) { /* can be unavailable! */
+@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
+ } else {
+ bus->sprom_offset = SSB_SPROM_BASE1;
+ }
+- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
++ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+
+ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ if (!buf)
+@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+- ssb_printk(KERN_WARNING PFX "WARNING: Using"
+- " fallback SPROM failed (err %d)\n",
+- err);
++ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
++ err);
+ } else {
+- ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+- " revision %d provided by"
+- " platform.\n", sprom->revision);
++ ssb_dbg("Using SPROM revision %d provided by platform\n",
++ sprom->revision);
+ err = 0;
+ goto out_free;
+ }
+- ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
+- " SPROM CRC (corrupt SPROM)\n");
++ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ }
+ }
+ err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+- pci_set_power_state(dev, 0);
++ pci_set_power_state(dev, PCI_D0);
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
++ ssb_err("Failed to switch to core %u\n", coreidx);
+ return err;
+ }
+
+@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
+ int err;
+
+ #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
+- ssb_printk(KERN_INFO PFX
+- "Switching to %s core, index %d\n",
+- ssb_core_name(dev->id.coreid),
+- dev->core_index);
++ ssb_info("Switching to %s core, index %d\n",
++ ssb_core_name(dev->id.coreid),
++ dev->core_index);
+ #endif
+
+ err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
+@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
++ ssb_err("Failed to switch pcmcia segment\n");
+ return err;
+ }
+
+@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
+ bool failed = 0;
+ size_t size = SSB_PCMCIA_SPROM_SIZE;
+
+- ssb_printk(KERN_NOTICE PFX
+- "Writing SPROM. Do NOT turn off the power! "
+- "Please stand by...\n");
++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not enable SPROM write access.\n");
++ ssb_notice("Could not enable SPROM write access\n");
+ return -EBUSY;
+ }
+- ssb_printk(KERN_NOTICE PFX "[ 0%%");
++ ssb_notice("[ 0%%");
+ msleep(500);
+ for (i = 0; i < size; i++) {
+ if (i == size / 4)
+- ssb_printk("25%%");
++ ssb_cont("25%%");
+ else if (i == size / 2)
+- ssb_printk("50%%");
++ ssb_cont("50%%");
+ else if (i == (size * 3) / 4)
+- ssb_printk("75%%");
++ ssb_cont("75%%");
+ else if (i % 2)
+- ssb_printk(".");
++ ssb_cont(".");
+ err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Failed to write to SPROM.\n");
++ ssb_notice("Failed to write to SPROM\n");
+ failed = 1;
+ break;
+ }
+ }
+ err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ if (err) {
+- ssb_printk(KERN_NOTICE PFX
+- "Could not disable SPROM write access.\n");
++ ssb_notice("Could not disable SPROM write access\n");
+ failed = 1;
+ }
+ msleep(500);
+ if (!failed) {
+- ssb_printk("100%% ]\n");
+- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
++ ssb_cont("100%% ]\n");
++ ssb_notice("SPROM written\n");
+ }
+
+ return failed ? -EBUSY : 0;
+@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
+ return -ENOSPC; /* continue with next entry */
+
+ error:
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+ ssb_pcmcia_get_mac, sprom);
+ if (res != 0) {
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch MAC address\n");
+ return -ENODEV;
+ }
+@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
+ if ((res == 0) || (res == -ENOSPC))
+ return 0;
+
+- ssb_printk(KERN_ERR PFX
++ ssb_err(
+ "PCMCIA: Failed to fetch device invariants\n");
+ return -ENODEV;
+ }
+@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
+
+ return 0;
+ error:
+- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
++ ssb_err("Failed to initialize PCMCIA host device\n");
+ return err;
+ }
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
+ chipid_fallback = 0x4401;
+ break;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "PCI-ID not in fallback list\n");
++ ssb_err("PCI-ID not in fallback list\n");
+ }
+
+ return chipid_fallback;
+@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
+ case 0x4704:
+ return 9;
+ default:
+- ssb_printk(KERN_ERR PFX
+- "CHIPID not in nrcores fallback list\n");
++ ssb_err("CHIPID not in nrcores fallback list\n");
+ }
+
+ return 1;
+@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ bus->chip_package = 0;
+ }
+ }
+- ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
+- "package 0x%02X\n", bus->chip_id, bus->chip_rev,
+- bus->chip_package);
++ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
++ bus->chip_id, bus->chip_rev, bus->chip_package);
+ if (!bus->nr_devices)
+ bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+- ssb_printk(KERN_ERR PFX
+- "More than %d ssb cores found (%d)\n",
+- SSB_MAX_NR_CORES, bus->nr_devices);
++ ssb_err("More than %d ssb cores found (%d)\n",
++ SSB_MAX_NR_CORES, bus->nr_devices);
+ goto err_unmap;
+ }
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ nr_80211_cores++;
+ if (nr_80211_cores > 1) {
+ if (!we_support_multiple_80211_cores(bus)) {
+- ssb_dprintk(KERN_INFO PFX "Ignoring additional "
+- "802.11 core\n");
++ ssb_dbg("Ignoring additional 802.11 core\n");
+ continue;
+ }
+ }
+@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_EXTIF:
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ if (bus->extif.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple EXTIFs found\n");
++ ssb_warn("WARNING: Multiple EXTIFs found\n");
+ break;
+ }
+ bus->extif.dev = dev;
+@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ break;
+ case SSB_DEV_CHIPCOMMON:
+ if (bus->chipco.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple ChipCommon found\n");
++ ssb_warn("WARNING: Multiple ChipCommon found\n");
+ break;
+ }
+ bus->chipco.dev = dev;
+@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ case SSB_DEV_MIPS_3302:
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple MIPS cores found\n");
++ ssb_warn("WARNING: Multiple MIPS cores found\n");
+ break;
+ }
+ bus->mipscore.dev = dev;
+@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ }
+ }
+ if (bus->pcicore.dev) {
+- ssb_printk(KERN_WARNING PFX
+- "WARNING: Multiple PCI(E) cores found\n");
++ ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ break;
+ }
+ bus->pcicore.dev = dev;
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
+ while (cnt < sprom_size_words) {
+ memcpy(tmp, dump, 4);
+ dump += 4;
+- err = strict_strtoul(tmp, 16, &parsed);
++ err = kstrtoul(tmp, 16, &parsed);
+ if (err)
+ return err;
+ sprom[cnt++] = swab16((u16)parsed);
+@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ goto out_kfree;
+ err = ssb_devices_freeze(bus, &freeze);
+ if (err) {
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
++ ssb_err("SPROM write: Could not freeze all devices\n");
+ goto out_unlock;
+ }
+ res = sprom_write(bus, sprom);
+ err = ssb_devices_thaw(&freeze);
+ if (err)
+- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
++ ssb_err("SPROM write: Could not thaw all devices\n");
+ out_unlock:
+ mutex_unlock(&bus->sprom_mutex);
+ out_kfree:
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
-@@ -3,6 +3,7 @@
+@@ -3,21 +3,33 @@
#include <linux/ssb/ssb.h>
#include <linux/types.h>
#define PFX "ssb: "
-@@ -210,5 +211,63 @@ static inline void b43_pci_ssb_bridge_ex
+
+ #ifdef CONFIG_SSB_SILENT
+-# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_printk(fmt, ...) \
++ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
+ #else
+-# define ssb_printk printk
++# define ssb_printk(fmt, ...) \
++ printk(fmt, ##__VA_ARGS__)
+ #endif /* CONFIG_SSB_SILENT */
+
++#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
++#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
++#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
++#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
++#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
++#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
++
+ /* dprintk: Debugging printk; vanishes for non-debug compilation */
+ #ifdef CONFIG_SSB_DEBUG
+-# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x)
++# define ssb_dbg(fmt, ...) \
++ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
+ #else
+-# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0)
++# define ssb_dbg(fmt, ...) \
++ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
+ #endif
+
+ #ifdef CONFIG_SSB_DEBUG
+@@ -210,5 +222,76 @@ static inline void b43_pci_ssb_bridge_ex
/* driver_chipcommon_pmu.c */
extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
+}
+#endif /* CONFIG_SSB_SFLASH */
+
++#ifdef CONFIG_SSB_DRIVER_MIPS
++extern struct platform_device ssb_pflash_dev;
++#endif
++
++#ifdef CONFIG_SSB_SFLASH
++extern struct platform_device ssb_sflash_dev;
++#endif
++
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
+extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+
+#ifdef CONFIG_SSB_DRIVER_GPIO
+extern int ssb_gpio_init(struct ssb_bus *bus);
++extern int ssb_gpio_unregister(struct ssb_bus *bus);
+#else /* CONFIG_SSB_DRIVER_GPIO */
+static inline int ssb_gpio_init(struct ssb_bus *bus)
+{
+ return -ENOTSUPP;
+}
++static inline int ssb_gpio_unregister(struct ssb_bus *bus)
++{
++ return 0;
++}
+#endif /* CONFIG_SSB_DRIVER_GPIO */
#endif /* LINUX_SSB_PRIVATE_H_ */
#include <linux/ssb/ssb_regs.h>
-@@ -432,7 +434,11 @@ struct ssb_bus {
+@@ -24,9 +26,9 @@ struct ssb_sprom_core_pwr_info {
+
+ struct ssb_sprom {
+ u8 revision;
+- u8 il0mac[6]; /* MAC address for 802.11b/g */
+- u8 et0mac[6]; /* MAC address for Ethernet */
+- u8 et1mac[6]; /* MAC address for 802.11a */
++ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
++ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
++ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
+ u8 et0phyaddr; /* MII address for enet0 */
+ u8 et1phyaddr; /* MII address for enet1 */
+ u8 et0mdcport; /* MDIO for enet0 */
+@@ -338,13 +340,61 @@ enum ssb_bustype {
+ #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
+ #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
+ /* board_type */
++#define SSB_BOARD_BCM94301CB 0x0406
++#define SSB_BOARD_BCM94301MP 0x0407
++#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_BCM94309CB 0x040B
++#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BU4306 0x0416
+ #define SSB_BOARD_BCM94306MP 0x0418
+ #define SSB_BOARD_BCM4309G 0x0421
+ #define SSB_BOARD_BCM4306CB 0x0417
+-#define SSB_BOARD_BCM4309MP 0x040C
++#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */
++#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */
++#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */
++#define SSB_BOARD_BU4704SD 0x042E /* with sdram */
++#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */
++#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */
++#define SSB_BOARD_BU4318 0x0447
++#define SSB_BOARD_CB4318 0x0448
++#define SSB_BOARD_MPG4318 0x0449
+ #define SSB_BOARD_MP4318 0x044A
+-#define SSB_BOARD_BU4306 0x0416
+-#define SSB_BOARD_BU4309 0x040A
++#define SSB_BOARD_SD4318 0x044B
++#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */
++#define SSB_BOARD_BCM94303MP 0x044E
++#define SSB_BOARD_BCM94306MPM 0x0450
++#define SSB_BOARD_BCM94306MPL 0x0453
++#define SSB_BOARD_PC4303 0x0454 /* pcmcia */
++#define SSB_BOARD_BCM94306MPLNA 0x0457
++#define SSB_BOARD_BCM94306MPH 0x045B
++#define SSB_BOARD_BCM94306PCIV 0x045C
++#define SSB_BOARD_BCM94318MPGH 0x0463
++#define SSB_BOARD_BU4311 0x0464
++#define SSB_BOARD_BCM94311MC 0x0465
++#define SSB_BOARD_BCM94311MCAG 0x0466
++/* 4321 boards */
++#define SSB_BOARD_BU4321 0x046B
++#define SSB_BOARD_BU4321E 0x047C
++#define SSB_BOARD_MP4321 0x046C
++#define SSB_BOARD_CB2_4321 0x046D
++#define SSB_BOARD_CB2_4321_AG 0x0066
++#define SSB_BOARD_MC4321 0x046E
++/* 4325 boards */
++#define SSB_BOARD_BCM94325DEVBU 0x0490
++#define SSB_BOARD_BCM94325BGABU 0x0491
++#define SSB_BOARD_BCM94325SDGWB 0x0492
++#define SSB_BOARD_BCM94325SDGMDL 0x04AA
++#define SSB_BOARD_BCM94325SDGMDL2 0x04C6
++#define SSB_BOARD_BCM94325SDGMDL3 0x04C9
++#define SSB_BOARD_BCM94325SDABGWBA 0x04E1
++/* 4322 boards */
++#define SSB_BOARD_BCM94322MC 0x04A4
++#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */
++#define SSB_BOARD_BCM94322HM 0x04B0
++#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */
++/* 4312 boards */
++#define SSB_BOARD_BU4312 0x048A
++#define SSB_BOARD_BCM4312MCGSG 0x04B5
+ /* chip_package */
+ #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
+ #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
+@@ -432,7 +482,11 @@ struct ssb_bus {
#ifdef CONFIG_SSB_EMBEDDED
/* Lock for GPIO register access. */
spinlock_t gpio_lock;
+
#endif /* CONFIG_SSB_DRIVER_EXTIF */
#endif /* LINUX_SSB_EXTIFCORE_H_ */
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
+ return 0;
+ }
+
+-#ifdef CONFIG_BCM47XX
+-#include <asm/mach-bcm47xx/nvram.h>
+ /* Get the device MAC address */
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+-{
+- char buf[20];
+- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+- return;
+- nvram_parse_macaddr(buf, macaddr);
+-}
+-#else
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+ {
++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++ if (!dev)
++ return -ENODEV;
++
++ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
++ return 0;
+ }
+-#endif
+
+ extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev);
+@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
+ {
+ return 0;
+ }
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++{
++ return -ENODEV;
++}
+
+ #endif /* CONFIG_SSB_DRIVER_GIGE */
+ #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
-@@ -13,6 +13,12 @@ struct ssb_serial_port {
+@@ -13,6 +13,24 @@ struct ssb_serial_port {
unsigned int reg_shift;
};
+ u32 window;
+ u32 window_size;
+};
++
++#ifdef CONFIG_SSB_SFLASH
++struct ssb_sflash {
++ bool present;
++ u32 window;
++ u32 blocksize;
++ u16 numblocks;
++ u32 size;
++
++ void *priv;
++};
++#endif
struct ssb_mipscore {
struct ssb_device *dev;
-@@ -20,9 +26,7 @@ struct ssb_mipscore {
+@@ -20,9 +38,10 @@ struct ssb_mipscore {
int nr_serial_ports;
struct ssb_serial_port serial_ports[4];
- u32 flash_window;
- u32 flash_window_size;
+ struct ssb_pflash pflash;
++#ifdef CONFIG_SSB_SFLASH
++ struct ssb_sflash sflash;
++#endif
};
extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
+@@ -41,6 +60,11 @@ void ssb_mipscore_init(struct ssb_mipsco
+ {
+ }
+
++static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
++{
++ return 0;
++}
++
+ #endif /* CONFIG_SSB_DRIVER_MIPS */
+
+ #endif /* LINUX_SSB_MIPSCORE_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -289,11 +289,11 @@
+@@ -172,6 +172,7 @@
+ #define SSB_SPROMSIZE_WORDS_R4 220
+ #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
++#define SSB_SPROMSIZE_WORDS_R10 230
+ #define SSB_SPROM_BASE1 0x1000
+ #define SSB_SPROM_BASE31 0x0800
+ #define SSB_SPROM_REVISION 0x007E
+@@ -289,11 +290,11 @@
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM4_AGAIN0_SHIFT 0
-@@ -485,7 +485,7 @@
+@@ -485,7 +486,7 @@
#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5
break;
#endif
}
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
- return (s8)gain;
- }
-
-+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
-+{
-+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
-+ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
-+ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
-+ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
-+ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
-+ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
-+ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
-+ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
-+ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
-+ SSB_SPROM2_MAXP_A_LO_SHIFT);
-+}
-+
- static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
- {
- int i;
-@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
- SSB_SPROM1_ITSSI_A_SHIFT);
- SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
- SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
-- if (out->revision >= 2)
-- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
-+
- SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
- SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
-
-@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
- out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
- SSB_SPROM1_AGAIN_A,
- SSB_SPROM1_AGAIN_A_SHIFT);
-+ if (out->revision >= 2)
-+ sprom_extract_r23(out, in);
- }
-
- /* Revs 4 5 and 8 have partially shared layout */
+--- a/arch/mips/bcm47xx/serial.c
++++ b/arch/mips/bcm47xx/serial.c
+@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(voi
+
+ p->mapbase = (unsigned int) bcma_port->regs;
+ p->membase = (void *) bcma_port->regs;
+- p->irq = bcma_port->irq + 2;
++ p->irq = bcma_port->irq;
+ p->uartclk = bcma_port->baud_base;
+ p->regshift = bcma_port->reg_shift;
+ p->iotype = UPIO_MEM;
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -65,6 +65,14 @@ config BCMA_DRIVER_GMAC_CMN
+@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
+ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
++ default y
+
+ config BCMA_DRIVER_PCI_HOSTMODE
+ bool "Driver for PCI core working in hostmode"
+@@ -65,6 +66,14 @@ config BCMA_DRIVER_GMAC_CMN
If unsure, say N
obj-$(CONFIG_BCMA) += bcma.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -31,6 +31,8 @@ int __init bcma_bus_early_register(struc
+@@ -22,6 +22,8 @@
+ struct bcma_bus;
+
+ /* main.c */
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout);
+ int __devinit bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+@@ -31,6 +33,8 @@ int __init bcma_bus_early_register(struc
int bcma_bus_suspend(struct bcma_bus *bus);
int bcma_bus_resume(struct bcma_bus *bus);
#endif
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
-@@ -48,8 +50,8 @@ void bcma_chipco_serial_init(struct bcma
+@@ -45,11 +49,12 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ /* driver_chipcommon.c */
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
++extern struct platform_device bcma_pflash_dev;
#endif /* CONFIG_BCMA_DRIVER_MIPS */
/* driver_chipcommon_pmu.c */
#ifdef CONFIG_BCMA_SFLASH
/* driver_chipcommon_sflash.c */
-@@ -84,9 +86,21 @@ extern void __exit bcma_host_pci_exit(vo
+@@ -84,9 +89,26 @@ extern void __exit bcma_host_pci_exit(vo
/* driver_pci.c */
u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
+#ifdef CONFIG_BCMA_DRIVER_GPIO
+/* driver_gpio.c */
+int bcma_gpio_init(struct bcma_drv_cc *cc);
++int bcma_gpio_unregister(struct bcma_drv_cc *cc);
+#else
+static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
+ return -ENOTSUPP;
+}
++static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return 0;
++}
+#endif /* CONFIG_BCMA_DRIVER_GPIO */
+
#endif
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -9,6 +9,25 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_aread32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ bool bcma_core_is_enabled(struct bcma_device *core)
+ {
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_devic
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+- bcma_awrite32(core, BCMA_IOCTL, flags);
+- bcma_aread32(core, BCMA_IOCTL);
+- udelay(10);
++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_disable);
+
+@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+@@ -104,7 +126,13 @@ void bcma_core_pll_ctl(struct bcma_devic
+ if (i)
+ bcma_err(core->bus, "PLL enable timeout\n");
+ } else {
+- bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
++ /*
++ * Mask the PLL but don't wait for it to be disabled. PLL may be
++ * shared between cores and will be still up if there is another
++ * core using it.
++ */
++ bcma_mask32(core, BCMA_CLKCTLST, ~req);
++ bcma_read32(core, BCMA_CLKCTLST);
+ }
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -4,12 +4,15 @@
#include <linux/bcma/bcma.h>
static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
-@@ -22,20 +25,120 @@ static inline u32 bcma_cc_write32_masked
+@@ -22,23 +25,130 @@ static inline u32 bcma_cc_write32_masked
return value;
}
+ bcma_core_chipcommon_early_init(cc);
+
if (cc->core->id.rev >= 20) {
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
-@@ -56,15 +159,33 @@ void bcma_core_chipcommon_init(struct bc
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ u32 pullup = 0, pulldown = 0;
++
++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
++ pullup = 0x402e0;
++ pulldown = 0x20500;
++ }
++
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
+ }
+
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+@@ -56,15 +166,33 @@ void bcma_core_chipcommon_init(struct bc
((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
(leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
}
}
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
-@@ -84,28 +205,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+@@ -84,28 +212,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
}
#ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -118,8 +310,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -118,8 +317,7 @@ void bcma_chipco_serial_init(struct bcma
struct bcma_serial_port *ports = cc->serial_ports;
if (ccrev >= 11 && ccrev != 15) {
if (ccrev >= 21) {
/* Turn off UART clock before switching clocksource. */
bcma_cc_write32(cc, BCMA_CC_CORECTL,
+@@ -141,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+ return;
+ }
+
+- irq = bcma_core_mips_irq(cc->core);
++ irq = bcma_core_irq(cc->core);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
--- a/drivers/bcma/driver_chipcommon_nflash.c
+++ b/drivers/bcma/driver_chipcommon_nflash.c
+@@ -5,11 +5,11 @@
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include "bcma_private.h"
++
+ #include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+
+-#include "bcma_private.h"
+-
+ struct platform_device bcma_nflash_dev = {
+ .name = "bcma_nflash",
+ .num_resources = 0,
+@@ -21,7 +21,7 @@ int bcma_nflash_init(struct bcma_drv_cc
+ struct bcma_bus *bus = cc->core->bus;
+
+ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
+- cc->core->id.rev != 0x38) {
++ cc->core->id.rev != 38) {
+ bcma_err(bus, "NAND flash on unsupported board!\n");
+ return -ENOTSUPP;
+ }
@@ -32,6 +32,9 @@ int bcma_nflash_init(struct bcma_drv_cc
}
void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
{
-@@ -144,7 +145,7 @@ static void bcma_pmu_workarounds(struct
+@@ -55,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+
++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
++{
++ u32 ilp_ctl, alp_hz;
++
++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
++ return 0;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++ usleep_range(1000, 2000);
++
++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++
++ alp_hz = ilp_ctl * 32768 / 4;
++ return (alp_hz + 50000) / 100000 * 100;
++}
++
++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 freq_tgt_target = 0, freq_tgt_current;
++ u32 pll0, mask;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ /* pmu2_xtaltab0_adfll_485 */
++ switch (xtalfreq) {
++ case 12000:
++ freq_tgt_target = 0x50D52;
++ break;
++ case 20000:
++ freq_tgt_target = 0x307FE;
++ break;
++ case 26000:
++ freq_tgt_target = 0x254EA;
++ break;
++ case 37400:
++ freq_tgt_target = 0x19EF8;
++ break;
++ case 52000:
++ freq_tgt_target = 0x12A75;
++ break;
++ }
++ break;
++ }
++
++ if (!freq_tgt_target) {
++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
++ xtalfreq);
++ return;
++ }
++
++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++
++ if (freq_tgt_current == freq_tgt_target) {
++ bcma_debug(bus, "Target TGT frequency already set\n");
++ return;
++ }
++
++ /* Turn off PLL */
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
++ BCMA_RES_4314_MACPHY_CLK_AVAIL);
++
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++ bcma_wait_value(cc->core, BCMA_CLKCTLST,
++ BCMA_CLKCTLST_HAVEHT, 0, 20000);
++ break;
++ }
++
++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
++
++ /* Flush */
++ if (cc->pmu.rev >= 2)
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++
++ /* TODO: Do we need to update OTP? */
++}
++
++static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ if (xtalfreq == 0)
++ xtalfreq = 20000;
++ bcma_pmu2_pll_init0(cc, xtalfreq);
++ break;
++ }
++}
++
+ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+@@ -65,6 +169,25 @@ static void bcma_pmu_resources_init(stru
+ min_msk = 0x200D;
+ max_msk = 0xFFFF;
+ break;
++ case BCMA_CHIP_ID_BCM43142:
++ min_msk = BCMA_RES_4314_LPLDO_PU |
++ BCMA_RES_4314_PMU_SLEEP_DIS |
++ BCMA_RES_4314_PMU_BG_PU |
++ BCMA_RES_4314_CBUCK_LPOM_PU |
++ BCMA_RES_4314_CBUCK_PFM_PU |
++ BCMA_RES_4314_CLDO_PU |
++ BCMA_RES_4314_LPLDO2_LVM |
++ BCMA_RES_4314_WL_PMU_PU |
++ BCMA_RES_4314_LDO3P3_PU |
++ BCMA_RES_4314_OTP_PU |
++ BCMA_RES_4314_WL_PWRSW_PU |
++ BCMA_RES_4314_LQ_AVAIL |
++ BCMA_RES_4314_LOGIC_RET |
++ BCMA_RES_4314_MEM_SLEEP |
++ BCMA_RES_4314_MACPHY_RET |
++ BCMA_RES_4314_WL_CORE_READY;
++ max_msk = 0x3FFFFFFF;
++ break;
+ default:
+ bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
+ bus->chipinfo.id);
+@@ -144,7 +267,7 @@ static void bcma_pmu_workarounds(struct
}
}
{
u32 pmucap;
-@@ -153,7 +154,10 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -153,7 +276,10 @@ void bcma_pmu_init(struct bcma_drv_cc *c
bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
cc->pmu.rev, pmucap);
if (cc->pmu.rev == 1)
bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
~BCMA_CC_PMU_CTL_NOILPONW);
-@@ -165,24 +169,40 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -161,28 +287,45 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+ BCMA_CC_PMU_CTL_NOILPONW);
+
++ bcma_pmu_pll_init(cc);
+ bcma_pmu_resources_init(cc);
bcma_pmu_workarounds(cc);
}
default:
bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
-@@ -193,7 +213,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+@@ -193,7 +336,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
/* Find the output of the "m" pll divider given pll controls that start with
* pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
*/
{
u32 tmp, div, ndiv, p1, p2, fc;
struct bcma_bus *bus = cc->core->bus;
-@@ -222,14 +242,14 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -222,14 +365,14 @@ static u32 bcma_pmu_clock(struct bcma_dr
ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
/* Do calculation in Mhz */
{
u32 tmp, ndiv, p1div, p2div;
u32 clock;
-@@ -260,7 +280,7 @@ static u32 bcma_pmu_clock_bcm4706(struct
+@@ -260,7 +403,7 @@ static u32 bcma_pmu_clock_bcm4706(struct
}
/* query bus clock frequency for PMU-enabled chipcommon */
-static u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
-+static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
-@@ -268,40 +288,42 @@ static u32 bcma_pmu_get_clockcontrol(str
+@@ -268,40 +411,43 @@ static u32 bcma_pmu_get_clockcontrol(str
case BCMA_CHIP_ID_BCM4716:
case BCMA_CHIP_ID_BCM4748:
case BCMA_CHIP_ID_BCM47162:
}
return BCMA_CC_PMU_HT_CLOCK;
}
++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
/* query cpu clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
BCMA_CC_PMU4706_MAINPLL_PLL0,
BCMA_CC_PMU5_MAINPLL_CPU);
case BCMA_CHIP_ID_BCM5356:
-@@ -316,10 +338,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -316,10 +462,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
break;
}
}
static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
-@@ -365,7 +388,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -365,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
break;
case BCMA_CHIP_ID_BCM4331:
-@@ -386,7 +409,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -386,7 +533,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
0x03000a08);
}
break;
case BCMA_CHIP_ID_BCM43224:
-@@ -419,7 +442,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -419,7 +566,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
0x88888815);
}
break;
case BCMA_CHIP_ID_BCM4716:
-@@ -453,7 +476,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -453,7 +600,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
0x88888815);
}
break;
case BCMA_CHIP_ID_BCM43227:
-@@ -489,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -489,7 +636,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
0x88888815);
}
bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
-@@ -12,7 +12,7 @@
+@@ -5,14 +5,14 @@
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include "bcma_private.h"
++
+ #include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+-#include "bcma_private.h"
+-
static struct resource bcma_sflash_resource = {
.name = "bcma_sflash",
- .start = BCMA_SFLASH,
.end = 0,
.flags = IORESOURCE_MEM | IORESOURCE_READONLY,
};
-@@ -31,15 +31,42 @@ struct bcma_sflash_tbl_e {
+@@ -30,16 +30,43 @@ struct bcma_sflash_tbl_e {
+ u16 numblocks;
};
- static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
- { "", 0x14, 0x10000, 32, },
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
{ 0 },
};
- static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
{ 0 },
};
- static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
{ 0 },
};
+@@ -62,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc
+ {
+ struct bcma_bus *bus = cc->core->bus;
+ struct bcma_sflash *sflash = &cc->sflash;
+- struct bcma_sflash_tbl_e *e;
++ const struct bcma_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
@@ -84,6 +111,8 @@ int bcma_sflash_init(struct bcma_drv_cc
break;
}
sflash->size = sflash->blocksize * sflash->numblocks;
--- /dev/null
+++ b/drivers/bcma/driver_gpio.c
-@@ -0,0 +1,98 @@
+@@ -0,0 +1,114 @@
+/*
+ * Broadcom specific AMBA
+ * GPIO driver
+ bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
+}
+
++static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
++{
++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
++
++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
++ return bcma_core_irq(cc->core);
++ else
++ return -EINVAL;
++}
++
+int bcma_gpio_init(struct bcma_drv_cc *cc)
+{
+ struct gpio_chip *chip = &cc->gpio;
+ chip->set = bcma_gpio_set_value;
+ chip->direction_input = bcma_gpio_direction_input;
+ chip->direction_output = bcma_gpio_direction_output;
++ chip->to_irq = bcma_gpio_to_irq;
+ chip->ngpio = 16;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+
+ return gpiochip_add(chip);
+}
++
++int bcma_gpio_unregister(struct bcma_drv_cc *cc)
++{
++ return gpiochip_remove(&cc->gpio);
++}
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
-@@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct
+@@ -14,11 +14,33 @@
+
+ #include <linux/bcma/bcma.h>
+
++#include <linux/mtd/physmap.h>
++#include <linux/platform_device.h>
+ #include <linux/serial.h>
+ #include <linux/serial_core.h>
+ #include <linux/serial_reg.h>
+ #include <linux/time.h>
+
++static const char * const part_probes[] = { "bcm47xxpart", NULL };
++
++static struct physmap_flash_data bcma_pflash_data = {
++ .part_probe_types = part_probes,
++};
++
++static struct resource bcma_pflash_resource = {
++ .name = "bcma_pflash",
++ .flags = IORESOURCE_MEM,
++};
++
++struct platform_device bcma_pflash_dev = {
++ .name = "physmap-flash",
++ .dev = {
++ .platform_data = &bcma_pflash_data,
++ },
++ .resource = &bcma_pflash_resource,
++ .num_resources = 1,
++};
++
+ /* The 47162a0 hangs when reading MIPS DMP registers registers */
+ static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
+ {
+@@ -74,28 +96,41 @@ static u32 bcma_core_mips_irqflag(struct
return dev->core_index;
flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
*/
- unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+-unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
{
-@@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct b
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
unsigned int irq;
irqflag = bcma_core_mips_irqflag(dev);
- return 0;
+ return 5;
++}
++
++unsigned int bcma_core_irq(struct bcma_device *dev)
++{
++ unsigned int mips_irq = bcma_core_mips_irq(dev);
++ return mips_irq <= 4 ? mips_irq + 2 : 0;
}
- EXPORT_SYMBOL(bcma_core_mips_irq);
+-EXPORT_SYMBOL(bcma_core_mips_irq);
++EXPORT_SYMBOL(bcma_core_irq);
-@@ -114,7 +121,7 @@ static void bcma_core_mips_set_irq(struc
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+@@ -114,7 +149,7 @@ static void bcma_core_mips_set_irq(struc
bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
~(1 << irqflag));
bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
/* assign the new one */
-@@ -123,9 +130,9 @@ static void bcma_core_mips_set_irq(struc
+@@ -123,9 +158,9 @@ static void bcma_core_mips_set_irq(struc
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
(1 << irqflag));
} else {
struct bcma_device *core;
/* backplane irq line is in use, find out who uses
-@@ -133,7 +140,7 @@ static void bcma_core_mips_set_irq(struc
+@@ -133,7 +168,7 @@ static void bcma_core_mips_set_irq(struc
*/
list_for_each_entry(core, &bus->cores, list) {
if ((1 << bcma_core_mips_irqflag(core)) ==
bcma_core_mips_set_irq(core, 0);
break;
}
-@@ -143,15 +150,31 @@ static void bcma_core_mips_set_irq(struc
+@@ -143,15 +178,31 @@ static void bcma_core_mips_set_irq(struc
1 << irqflag);
}
for (i = 0; i <= 6; i++)
printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
printk("\n");
-@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -171,7 +222,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
struct bcma_bus *bus = mcore->core->bus;
if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
bcma_err(bus, "No PMU available, need this to get the cpu clock\n");
return 0;
-@@ -181,85 +204,109 @@ EXPORT_SYMBOL(bcma_cpu_clock);
+@@ -181,85 +232,143 @@ EXPORT_SYMBOL(bcma_cpu_clock);
static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
{
struct bcma_bus *bus = mcore->core->bus;
+ struct bcma_drv_cc *cc = &bus->drv_cc;
++ struct bcma_pflash *pflash = &cc->pflash;
- switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
bcma_debug(bus, "Found parallel flash\n");
- bus->drv_cc.pflash.window = 0x1c000000;
- bus->drv_cc.pflash.window_size = 0x02000000;
-+ cc->pflash.present = true;
-+ cc->pflash.window = BCMA_SOC_FLASH2;
-+ cc->pflash.window_size = BCMA_SOC_FLASH2_SZ;
++ pflash->present = true;
++ pflash->window = BCMA_SOC_FLASH2;
++ pflash->window_size = BCMA_SOC_FLASH2_SZ;
- if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
+ if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
BCMA_CC_FLASH_CFG_DS) == 0)
- bus->drv_cc.pflash.buswidth = 1;
-+ cc->pflash.buswidth = 1;
++ pflash->buswidth = 1;
else
- bus->drv_cc.pflash.buswidth = 2;
-+ cc->pflash.buswidth = 2;
++ pflash->buswidth = 2;
++
++ bcma_pflash_data.width = pflash->buswidth;
++ bcma_pflash_resource.start = pflash->window;
++ bcma_pflash_resource.end = pflash->window + pflash->window_size;
++
break;
default:
bcma_err(bus, "Flash type not supported\n");
+
+ mcore->early_setup_done = true;
+}
++
++static void bcma_fix_i2s_irqflag(struct bcma_bus *bus)
++{
++ struct bcma_device *cpu, *pcie, *i2s;
++
++ /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK)
++ * (IRQ flags > 7 are ignored when setting the interrupt masks)
++ */
++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 &&
++ bus->chipinfo.id != BCMA_CHIP_ID_BCM4748)
++ return;
++
++ cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
++ pcie = bcma_find_core(bus, BCMA_CORE_PCIE);
++ i2s = bcma_find_core(bus, BCMA_CORE_I2S);
++ if (cpu && pcie && i2s &&
++ bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 &&
++ bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) {
++ bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504);
++ bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87);
++ bcma_debug(bus,
++ "Moved i2s interrupt to oob line 7 instead of 8\n");
++ }
++}
+
void bcma_core_mips_init(struct bcma_drv_mips *mcore)
{
- break;
+ bcma_core_mips_early_init(mcore);
+
++ bcma_fix_i2s_irqflag(bus);
++
+ switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM4716:
+ case BCMA_CHIP_ID_BCM4748:
+ break;
+ default:
+ list_for_each_entry(core, &bus->cores, list) {
-+ core->irq = bcma_core_mips_irq(core) + 2;
++ core->irq = bcma_core_irq(core);
}
+ bcma_err(bus,
+ "Unknown device (0x%x) found, can not configure IRQs\n",
bcma_core_enable(pc->core, 0);
return !mips_busprobe32(tmp, pc->core->io_addr);
-@@ -396,6 +391,11 @@ void __devinit bcma_core_pci_hostmode_in
+@@ -99,19 +94,19 @@ static int bcma_extpci_read_config(struc
+ if (dev == 0) {
+ /* we support only two functions on device 0 */
+ if (func > 1)
+- return -EINVAL;
++ goto out;
+
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
+ if (off >= PCI_CONFIG_SPACE_SIZE) {
+ addr = (func << 12);
+- addr |= (off & 0x0FFF);
++ addr |= (off & 0x0FFC);
+ val = bcma_pcie_read_config(pc, addr);
+ } else {
+ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
+- addr |= (off & 0xfc);
++ addr |= (off & 0xFC);
+ val = pcicore_read32(pc, addr);
+ }
+ } else {
+@@ -124,11 +119,9 @@ static int bcma_extpci_read_config(struc
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
+- val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
+-
+- val = readl(mmio);
+ }
+ val >>= (8 * (off & 3));
+
+@@ -156,7 +149,7 @@ static int bcma_extpci_write_config(stru
+ const void *buf, int len)
+ {
+ int err = -EINVAL;
+- u32 addr = 0, val = 0;
++ u32 addr, val;
+ void __iomem *mmio = 0;
+ u16 chipid = pc->core->bus->chipinfo.id;
+
+@@ -164,16 +157,22 @@ static int bcma_extpci_write_config(stru
+ if (unlikely(len != 1 && len != 2 && len != 4))
+ goto out;
+ if (dev == 0) {
++ /* we support only two functions on device 0 */
++ if (func > 1)
++ goto out;
++
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
+- if (off < PCI_CONFIG_SPACE_SIZE) {
+- addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
++ if (off >= PCI_CONFIG_SPACE_SIZE) {
++ addr = (func << 12);
++ addr |= (off & 0x0FFC);
++ val = bcma_pcie_read_config(pc, addr);
++ } else {
++ addr = BCMA_CORE_PCI_PCICFG0;
+ addr |= (func << 8);
+- addr |= (off & 0xfc);
+- mmio = ioremap_nocache(addr, sizeof(val));
+- if (!mmio)
+- goto out;
++ addr |= (off & 0xFC);
++ val = pcicore_read32(pc, addr);
+ }
+ } else {
+ addr = bcma_get_cfgspace_addr(pc, dev, func, off);
+@@ -185,19 +184,17 @@ static int bcma_extpci_write_config(stru
+ goto out;
+
+ if (mips_busprobe32(val, mmio)) {
+- val = 0xffffffff;
++ val = 0xFFFFFFFF;
+ goto unmap;
+ }
+ }
+
+ switch (len) {
+ case 1:
+- val = readl(mmio);
+ val &= ~(0xFF << (8 * (off & 3)));
+ val |= *((const u8 *)buf) << (8 * (off & 3));
+ break;
+ case 2:
+- val = readl(mmio);
+ val &= ~(0xFFFF << (8 * (off & 3)));
+ val |= *((const u16 *)buf) << (8 * (off & 3));
+ break;
+@@ -205,13 +202,14 @@ static int bcma_extpci_write_config(stru
+ val = *((const u32 *)buf);
+ break;
+ }
+- if (dev == 0 && !addr) {
++ if (dev == 0) {
+ /* accesses to config registers with offsets >= 256
+ * requires indirect access.
+ */
+- addr = (func << 12);
+- addr |= (off & 0x0FFF);
+- bcma_pcie_write_config(pc, addr, val);
++ if (off >= PCI_CONFIG_SPACE_SIZE)
++ bcma_pcie_write_config(pc, addr, val);
++ else
++ pcicore_write32(pc, addr, val);
+ } else {
+ writel(val, mmio);
+
+@@ -282,7 +280,7 @@ static u8 __devinit bcma_find_pci_capabi
+ /* check for Header type 0 */
+ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val,
+ sizeof(u8));
+- if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL)
++ if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL)
+ return cap_ptr;
+
+ /* check if the capability pointer field exists */
+@@ -396,12 +394,19 @@ void __devinit bcma_core_pci_hostmode_in
bcma_info(bus, "PCIEcore in host mode found\n");
pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
if (!pc_host) {
bcma_err(bus, "can not allocate memory");
-@@ -452,6 +452,8 @@ void __devinit bcma_core_pci_hostmode_in
+ return;
+ }
+
++ spin_lock_init(&pc_host->cfgspace_lock);
++
+ pc->host_controller = pc_host;
+ pc_host->pci_controller.io_resource = &pc_host->io_resource;
+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
+@@ -427,7 +432,7 @@ void __devinit bcma_core_pci_hostmode_in
+ /* Reset RC */
+ usleep_range(3000, 5000);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
+- usleep_range(1000, 2000);
++ msleep(50);
+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
+ BCMA_CORE_PCI_CTL_RST_OE);
+
+@@ -452,6 +457,8 @@ void __devinit bcma_core_pci_hostmode_in
pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
BCMA_SOC_PCI_MEM_SZ - 1;
pci_membase_1G = BCMA_SOC_PCIE_DMA_H32;
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
tmp | BCMA_SOC_PCI_MEM);
-@@ -459,6 +461,8 @@ void __devinit bcma_core_pci_hostmode_in
+@@ -459,6 +466,8 @@ void __devinit bcma_core_pci_hostmode_in
pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM;
pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM +
BCMA_SOC_PCI_MEM_SZ - 1;
pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32;
pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG;
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
-@@ -534,7 +538,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_
+@@ -485,6 +494,17 @@ void __devinit bcma_core_pci_hostmode_in
+
+ bcma_core_pci_enable_crs(pc);
+
++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 ||
++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) {
++ u16 val16;
++ bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ val16 |= (2 << 5); /* Max payload size of 512 */
++ val16 |= (2 << 12); /* MRRS 512 */
++ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
++ &val16, sizeof(val16));
++ }
++
+ /* Enable PCI bridge BAR0 memory & master access */
+ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
+@@ -534,7 +554,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_
static void bcma_core_pci_fixup_addresses(struct pci_dev *dev)
{
struct resource *res;
if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
/* This is not a device on the PCI-core bridge. */
-@@ -547,8 +551,12 @@ static void bcma_core_pci_fixup_addresse
+@@ -547,8 +567,12 @@ static void bcma_core_pci_fixup_addresse
for (pos = 0; pos < 6; pos++) {
res = &dev->resource[pos];
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses);
+@@ -569,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
+ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+ /* Fix up interrupt lines */
+- dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ dev->irq = bcma_core_irq(pc_host->pdev->core);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+ return 0;
+@@ -588,6 +612,6 @@ int bcma_core_pci_pcibios_map_irq(const
+
+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ pci_ops);
+- return bcma_core_mips_irq(pc_host->pdev->core) + 2;
++ return bcma_core_irq(pc_host->pdev->core);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -238,7 +238,7 @@ static void __devexit bcma_host_pci_remo
static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
+@@ -275,6 +275,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ { 0, },
+ };
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
-@@ -81,6 +81,18 @@ struct bcma_device *bcma_find_core(struc
+@@ -81,6 +81,37 @@ struct bcma_device *bcma_find_core(struc
}
EXPORT_SYMBOL_GPL(bcma_find_core);
+ }
+ return NULL;
+}
++
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
+
static void bcma_release_core_dev(struct device *dev)
{
struct bcma_device *core = container_of(dev, struct bcma_device, dev);
-@@ -152,6 +164,17 @@ static int bcma_register_cores(struct bc
+@@ -108,6 +139,11 @@ static int bcma_register_cores(struct bc
+ continue;
+ }
+
++ /* Only first GMAC core on BCM4706 is connected and working */
++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++ core->core_unit > 0)
++ continue;
++
+ core->dev.release = bcma_release_core_dev;
+ core->dev.bus = &bcma_bus_type;
+ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
+@@ -137,6 +173,14 @@ static int bcma_register_cores(struct bc
+ dev_id++;
+ }
+
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++ if (bus->drv_cc.pflash.present) {
++ err = platform_device_register(&bcma_pflash_dev);
++ if (err)
++ bcma_err(bus, "Error registering parallel flash\n");
++ }
++#endif
++
+ #ifdef CONFIG_BCMA_SFLASH
+ if (bus->drv_cc.sflash.present) {
+ err = platform_device_register(&bcma_sflash_dev);
+@@ -152,6 +196,17 @@ static int bcma_register_cores(struct bc
bcma_err(bus, "Error registering NAND flash\n");
}
#endif
return 0;
}
-@@ -165,6 +188,8 @@ static void bcma_unregister_cores(struct
+@@ -165,6 +220,8 @@ static void bcma_unregister_cores(struct
if (core->dev_registered)
device_unregister(&core->dev);
}
}
int __devinit bcma_bus_register(struct bcma_bus *bus)
-@@ -183,6 +208,20 @@ int __devinit bcma_bus_register(struct b
+@@ -183,6 +240,20 @@ int __devinit bcma_bus_register(struct b
return -1;
}
/* Init CC core */
core = bcma_find_core(bus, bcma_cc_core_id(bus));
if (core) {
-@@ -198,10 +237,17 @@ int __devinit bcma_bus_register(struct b
+@@ -198,10 +269,17 @@ int __devinit bcma_bus_register(struct b
}
/* Init PCIE core */
- core = bcma_find_core(bus, BCMA_CORE_PCIE);
+ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0);
- if (core) {
-- bus->drv_pci.core = core;
-- bcma_core_pci_init(&bus->drv_pci);
++ if (core) {
+ bus->drv_pci[0].core = core;
+ bcma_core_pci_init(&bus->drv_pci[0]);
+ }
+
+ /* Init PCIE core */
+ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1);
-+ if (core) {
+ if (core) {
+- bus->drv_pci.core = core;
+- bcma_core_pci_init(&bus->drv_pci);
+ bus->drv_pci[1].core = core;
+ bcma_core_pci_init(&bus->drv_pci[1]);
}
/* Init GBIT MAC COMMON core */
-@@ -211,13 +257,6 @@ int __devinit bcma_bus_register(struct b
+@@ -211,13 +289,6 @@ int __devinit bcma_bus_register(struct b
bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn);
}
/* Register found cores */
bcma_register_cores(bus);
-@@ -275,18 +314,18 @@ int __init bcma_bus_early_register(struc
+@@ -229,6 +300,13 @@ int __devinit bcma_bus_register(struct b
+ void bcma_bus_unregister(struct bcma_bus *bus)
+ {
+ struct bcma_device *cores[3];
++ int err;
++
++ err = bcma_gpio_unregister(&bus->drv_cc);
++ if (err == -EBUSY)
++ bcma_err(bus, "Some GPIOs are still in use.\n");
++ else if (err)
++ bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
+
+ cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+ cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
+@@ -275,18 +353,18 @@ int __init bcma_bus_early_register(struc
return -1;
}
}
bcma_info(bus, "Early bus registered\n");
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -84,6 +84,8 @@ static const struct bcma_device_id_name
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
+ { BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_PCIE2, "PCIe Gen2" },
++ { BCMA_CORE_ARM_CR4, "ARM CR4" },
+ { BCMA_CORE_DEFAULT, "Default" },
+ };
+
+@@ -137,19 +139,19 @@ static void bcma_scan_switch_core(struct
+ addr);
+ }
+
+-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = readl(*eromptr);
+ (*eromptr)++;
+ return ent;
+ }
+
+-static void bcma_erom_push_ent(u32 **eromptr)
++static void bcma_erom_push_ent(u32 __iomem **eromptr)
+ {
+ (*eromptr)--;
+ }
+
+-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -159,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+ return ent;
+ }
+
+-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+ }
+
+-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+@@ -175,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b
+ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+ }
+
+-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent;
+ while (1) {
+@@ -189,7 +191,7 @@ static void bcma_erom_skip_component(str
+ bcma_erom_push_ent(eromptr);
+ }
+
+-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
+ {
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+@@ -199,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct
+ return ent;
+ }
+
+-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+ u32 type, u8 port)
+ {
+ u32 addrl, addrh, sizel, sizeh = 0;
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
-@@ -595,8 +595,11 @@ int bcma_sprom_get(struct bcma_bus *bus)
+@@ -72,12 +72,12 @@ fail:
+ * R/W ops.
+ **************************************************/
+
+-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
++ size_t words)
+ {
+ int i;
+- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+- sprom[i] = bcma_read16(bus->drv_cc.core,
+- offset + (i * 2));
++ for (i = 0; i < words; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
+ }
+
+ /**************************************************
+@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
+ return t[crc ^ data];
+ }
+
+-static u8 bcma_sprom_crc(const u16 *sprom)
++static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
+ {
+ int word;
+ u8 crc = 0xFF;
+
+- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ for (word = 0; word < words - 1; word++) {
+ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+ }
+
+-static int bcma_sprom_check_crc(const u16 *sprom)
++static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
+ {
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+- crc = bcma_sprom_crc(sprom);
+- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ crc = bcma_sprom_crc(sprom, words);
++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
+ return 0;
+ }
+
+-static int bcma_sprom_valid(const u16 *sprom)
++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
++ size_t words)
+ {
+ u16 revision;
+ int err;
+
+- err = bcma_sprom_check_crc(sprom);
++ err = bcma_sprom_check_crc(sprom, words);
+ if (err)
+ return err;
+
+- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+- if (revision != 8 && revision != 9) {
++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9 && revision != 10) {
+ pr_err("Unsupported SPROM revision: %d\n", revision);
+ return -ENOENT;
+ }
+
++ bus->sprom.revision = revision;
++ bcma_debug(bus, "Found SPROM revision %d\n", revision);
++
+ return 0;
+ }
+
+@@ -208,15 +212,13 @@ static void bcma_sprom_extract_r8(struct
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(bus->sprom.core_pwr_info));
+
+- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+- SSB_SPROM_REVISION_REV;
+-
+ for (i = 0; i < 3; i++) {
+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
+ }
+
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
++ SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
+
+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
+ SSB_SPROM4_TXPID2G0_SHIFT);
+@@ -501,7 +503,7 @@ static bool bcma_sprom_onchip_available(
+ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
+-
++ case BCMA_CHIP_ID_BCM43142:
+ case BCMA_CHIP_ID_BCM43224:
+ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
+@@ -549,7 +551,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ {
+ u16 offset = BCMA_CC_SPROM;
+ u16 *sprom;
+- int err = 0;
++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
++ SSB_SPROMSIZE_WORDS_R10, };
++ int i, err = 0;
+
+ if (!bus->drv_cc.core)
+ return -EOPNOTSUPP;
+@@ -578,29 +582,37 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ }
+ }
+
+- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+- GFP_KERNEL);
+- if (!sprom)
+- return -ENOMEM;
+-
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
+
+ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
+- bcma_sprom_read(bus, offset, sprom);
++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
++ size_t words = sprom_sizes[i];
++
++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, offset, sprom, words);
++ err = bcma_sprom_valid(bus, sprom, words);
++ if (!err)
++ break;
++
++ kfree(sprom);
++ }
+
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
- err = bcma_sprom_valid(sprom);
+- err = bcma_sprom_valid(sprom);
- if (err)
+- goto out;
+-
+- bcma_sprom_extract_r8(bus, sprom);
+ if (err) {
-+ bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
- goto out;
++ } else {
++ bcma_sprom_extract_r8(bus, sprom);
++ kfree(sprom);
+ }
- bcma_sprom_extract_r8(bus, sprom);
-
+-out:
+- kfree(sprom);
+ return err;
+ }
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
-@@ -134,6 +134,7 @@ struct bcma_host_ops {
+@@ -134,12 +134,17 @@ struct bcma_host_ops {
#define BCMA_CORE_I2S 0x834
#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
-+#define BCMA_CORE_ARM_CR4 0x83e
++#define BCMA_CORE_PHY_AC 0x83B
++#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
++#define BCMA_CORE_USB30_DEV 0x83D
++#define BCMA_CORE_ARM_CR4 0x83E
#define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
-@@ -157,6 +158,7 @@ struct bcma_host_ops {
+
+ /* Chip IDs of PCIe devices */
+ #define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43142 43142
+ #define BCMA_CHIP_ID_BCM43224 43224
+ #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
+ #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
+@@ -157,6 +162,7 @@ struct bcma_host_ops {
/* Chip IDs of SoCs */
#define BCMA_CHIP_ID_BCM4706 0x5300
#define BCMA_CHIP_ID_BCM4716 0x4716
#define BCMA_PKG_ID_BCM4716 8
#define BCMA_PKG_ID_BCM4717 9
-@@ -166,7 +168,11 @@ struct bcma_host_ops {
+@@ -166,7 +172,65 @@ struct bcma_host_ops {
#define BCMA_CHIP_ID_BCM4749 0x4749
#define BCMA_CHIP_ID_BCM5356 0x5356
#define BCMA_CHIP_ID_BCM5357 0x5357
+#define BCMA_PKG_ID_BCM5357 11
#define BCMA_CHIP_ID_BCM53572 53572
+#define BCMA_PKG_ID_BCM47188 9
++
++/* Board types (on PCI usually equals to the subsystem dev id) */
++/* BCM4313 */
++#define BCMA_BOARD_TYPE_BCM94313BU 0X050F
++#define BCMA_BOARD_TYPE_BCM94313HM 0X0510
++#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511
++#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C
++/* BCM4716 */
++#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD
++/* BCM43224 */
++#define BCMA_BOARD_TYPE_BCM943224X21 0X056E
++#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1
++#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9
++#define BCMA_BOARD_TYPE_BCM943224M93 0X008B
++#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090
++#define BCMA_BOARD_TYPE_BCM943224X16 0X0093
++#define BCMA_BOARD_TYPE_BCM94322X9 0X008D
++#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E
++/* BCM43228 */
++#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540
++#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541
++#define BCMA_BOARD_TYPE_BCM943228BU 0X0542
++#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543
++#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544
++#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545
++#define BCMA_BOARD_TYPE_BCM943228SD 0X0573
++/* BCM4331 */
++#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6
++#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4
++#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC
++#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED
++#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF
++#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5
++#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4
++#define BCMA_BOARD_TYPE_BCM94331BU 0X0523
++#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524
++#define BCMA_BOARD_TYPE_BCM94331MC 0X0525
++#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526
++#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527
++#define BCMA_BOARD_TYPE_BCM94331HM 0X0574
++#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B
++#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9
++#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6
++#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA
++/* BCM53572 */
++#define BCMA_BOARD_TYPE_BCM953572BU 0X058D
++#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E
++#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F
++#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590
++/* BCM43142 */
++#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0
struct bcma_device {
struct bcma_bus *bus;
-@@ -251,7 +257,7 @@ struct bcma_bus {
+@@ -251,7 +315,7 @@ struct bcma_bus {
u8 num;
struct bcma_drv_cc drv_cc;
struct bcma_drv_mips drv_mips;
struct bcma_drv_gmac_cmn drv_gmac_cmn;
-@@ -345,6 +351,7 @@ extern void bcma_core_set_clockmode(stru
+@@ -345,6 +409,7 @@ extern void bcma_core_set_clockmode(stru
enum bcma_clkmode clkmode);
extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
bool on);
/** ChipCommon core registers. **/
#define BCMA_CC_ID 0x0000
#define BCMA_CC_ID_ID 0x0000FFFF
+@@ -24,7 +27,7 @@
+ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
+ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
+ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
+-#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */
++#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */
+ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
+ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
+ #define BCMA_PLLTYPE_NONE 0x00000000
@@ -101,6 +104,7 @@
#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
-@@ -510,6 +517,7 @@ struct bcma_chipcommon_pmu {
+@@ -323,6 +330,8 @@
+ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
+ #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+@@ -348,6 +357,11 @@
+ #define BCMA_CC_REGCTL_DATA 0x065C
+ #define BCMA_CC_PLLCTL_ADDR 0x0660
+ #define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
+ #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
+ /* NAND flash MLC controller registers (corerev >= 38) */
+ #define BCMA_CC_NAND_REVISION 0x0C00
+@@ -428,6 +442,23 @@
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
+
++/* PMU rev 15 */
++#define BCMA_CC_PMU15_PLL_PLLCTL0 0
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
++
+ /* ALP clock on pre-PMU chips */
+ #define BCMA_CC_PMU_ALP_CLOCK 20000000
+ /* HT clock for systems with PMU-enabled chipcommon */
+@@ -500,6 +531,37 @@
+ #define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
+ #define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
+
++#define BCMA_RES_4314_LPLDO_PU BIT(0)
++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
++#define BCMA_RES_4314_PMU_BG_PU BIT(2)
++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
++#define BCMA_RES_4314_CLDO_PU BIT(5)
++#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
++#define BCMA_RES_4314_WL_PMU_PU BIT(7)
++#define BCMA_RES_4314_LNLDO_PU BIT(8)
++#define BCMA_RES_4314_LDO3P3_PU BIT(9)
++#define BCMA_RES_4314_OTP_PU BIT(10)
++#define BCMA_RES_4314_XTAL_PU BIT(11)
++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
++#define BCMA_RES_4314_LQ_AVAIL BIT(13)
++#define BCMA_RES_4314_LOGIC_RET BIT(14)
++#define BCMA_RES_4314_MEM_SLEEP BIT(15)
++#define BCMA_RES_4314_MACPHY_RET BIT(16)
++#define BCMA_RES_4314_WL_CORE_READY BIT(17)
++#define BCMA_RES_4314_ILP_REQ BIT(18)
++#define BCMA_RES_4314_ALP_AVAIL BIT(19)
++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
++#define BCMA_RES_4314_RADIO_PU BIT(23)
++#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
++#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
++#define BCMA_RES_4314_RX_LDO_PU BIT(26)
++#define BCMA_RES_4314_TX_LDO_PU BIT(27)
++#define BCMA_RES_4314_HT_AVAIL BIT(28)
++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
++
+ /* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+@@ -510,6 +572,7 @@ struct bcma_chipcommon_pmu {
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash {
u8 buswidth;
u32 window;
u32 window_size;
-@@ -532,6 +540,7 @@ struct mtd_info;
+@@ -524,6 +587,7 @@ struct bcma_sflash {
+ u32 size;
+
+ struct mtd_info *mtd;
++ void *priv;
+ };
+ #endif
+
+@@ -532,6 +596,7 @@ struct mtd_info;
struct bcma_nflash {
bool present;
struct mtd_info *mtd;
};
-@@ -552,6 +561,7 @@ struct bcma_drv_cc {
+@@ -552,6 +617,7 @@ struct bcma_drv_cc {
u32 capabilities;
u32 capabilities_ext;
u8 setup_done:1;
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
struct bcma_chipcommon_pmu pmu;
-@@ -567,6 +577,14 @@ struct bcma_drv_cc {
+@@ -567,6 +633,14 @@ struct bcma_drv_cc {
int nr_serial_ports;
struct bcma_serial_port serial_ports[4];
#endif /* CONFIG_BCMA_DRIVER_MIPS */
};
/* Register access */
-@@ -583,14 +601,16 @@ struct bcma_drv_cc {
+@@ -583,14 +657,16 @@ struct bcma_drv_cc {
bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
-@@ -603,9 +623,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+@@ -603,9 +679,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
u32 value);
+@@ -617,4 +696,6 @@ extern void bcma_chipco_regctl_maskset(s
+ u32 offset, u32 mask, u32 set);
+ extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
+
++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
++
+ #endif /* LINUX_BCMA_DRIVER_CC_H_ */
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -35,13 +35,15 @@ struct bcma_device;
+@@ -28,6 +28,7 @@
+ #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048
+ #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0
+
++#define BCMA_MIPS_OOBSELINA74 0x004
+ #define BCMA_MIPS_OOBSELOUTA30 0x100
+
+ struct bcma_device;
+@@ -35,17 +36,24 @@ struct bcma_device;
struct bcma_drv_mips {
struct bcma_device *core;
u8 setup_done:1;
#ifdef CONFIG_BCMA_DRIVER_MIPS
extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
++
++extern unsigned int bcma_core_irq(struct bcma_device *core);
#else
static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
++
++static inline unsigned int bcma_core_irq(struct bcma_device *core)
++{
++ return 0;
++}
#endif
extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
+-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+-
+ #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
+--- a/include/linux/bcma/bcma_driver_pci.h
++++ b/include/linux/bcma/bcma_driver_pci.h
+@@ -179,6 +179,8 @@ struct pci_dev;
+ #define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */
+ #define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */
+
++#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8
++
+ /* PCIE Root Capability Register bits (Host mode only) */
+ #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001
+
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -37,6 +37,7 @@
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
-@@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS
+@@ -136,10 +136,15 @@ config SSB_DRIVER_MIPS
If unsure, say N
# Assumption: We are on embedded, if we compile the MIPS core.
config SSB_EMBEDDED
bool
+- depends on SSB_DRIVER_MIPS
++ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ default y
+
+ config SSB_DRIVER_EXTIF
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
"Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
-@@ -0,0 +1,140 @@
+@@ -0,0 +1,166 @@
+/*
+ * Sonics Silicon Backplane
+ * ChipCommon serial flash interface
+
+#include "ssb_private.h"
+
++static struct resource ssb_sflash_resource = {
++ .name = "ssb_sflash",
++ .start = SSB_FLASH2,
++ .end = 0,
++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device ssb_sflash_dev = {
++ .name = "ssb_sflash",
++ .resource = &ssb_sflash_resource,
++ .num_resources = 1,
++};
++
+struct ssb_sflash_tbl_e {
+ char *name;
+ u32 id;
+ u16 numblocks;
+};
+
-+static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+ { 0 },
+};
+
-+static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+ { 0 },
+};
+
-+static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+/* Initialize serial flash access */
+int ssb_sflash_init(struct ssb_chipcommon *cc)
+{
-+ struct ssb_sflash_tbl_e *e;
++ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
++ const struct ssb_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ return -ENOTSUPP;
+ }
+
++ sflash->window = SSB_FLASH2;
++ sflash->blocksize = e->blocksize;
++ sflash->numblocks = e->numblocks;
++ sflash->size = sflash->blocksize * sflash->numblocks;
++ sflash->present = true;
++
+ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
+ e->name, e->blocksize, e->numblocks);
+
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
++ sflash->size;
++ ssb_sflash_dev.dev.platform_data = sflash;
++
+ pr_err("Serial flash support is not implemented yet!\n");
+
+ return -ENOTSUPP;
/* Set dev to NULL to not unregister
* dev on error unwinding. */
sdev->dev = NULL;
-@@ -549,6 +545,14 @@ static int ssb_devices_register(struct s
+@@ -549,6 +545,22 @@ static int ssb_devices_register(struct s
dev_idx++;
}
+ pr_err("Error registering parallel flash\n");
+ }
+#endif
++
++#ifdef CONFIG_SSB_SFLASH
++ if (bus->mipscore.sflash.present) {
++ err = platform_device_register(&ssb_sflash_dev);
++ if (err)
++ pr_err("Error registering serial flash\n");
++ }
++#endif
+
return 0;
error:
/* Unwind the already registered devices. */
-@@ -817,10 +821,9 @@ static int ssb_bus_register(struct ssb_b
+@@ -817,10 +829,9 @@ static int ssb_bus_register(struct ssb_b
ssb_mipscore_init(&bus->mipscore);
err = ssb_gpio_init(bus);
if (err == -ENOTSUPP)
err = ssb_fetch_invariants(bus, get_invariants);
if (err) {
ssb_bus_may_powerdown(bus);
-@@ -870,11 +873,11 @@ int ssb_bus_pcibus_register(struct ssb_b
+@@ -870,11 +881,11 @@ int ssb_bus_pcibus_register(struct ssb_b
err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
if (!err) {
}
return err;
-@@ -895,8 +898,8 @@ int ssb_bus_pcmciabus_register(struct ss
+@@ -895,8 +906,8 @@ int ssb_bus_pcmciabus_register(struct ss
err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
if (!err) {
}
return err;
-@@ -917,8 +920,8 @@ int ssb_bus_sdiobus_register(struct ssb_
+@@ -917,8 +928,8 @@ int ssb_bus_sdiobus_register(struct ssb_
err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
if (!err) {
}
return err;
-@@ -936,8 +939,8 @@ int ssb_bus_ssbbus_register(struct ssb_b
+@@ -936,8 +947,8 @@ int ssb_bus_ssbbus_register(struct ssb_b
err = ssb_bus_register(bus, get_invariants, baseaddr);
if (!err) {
}
return err;
-@@ -1331,7 +1334,7 @@ out:
+@@ -1331,7 +1342,7 @@ out:
#endif
return err;
error:
goto out;
}
EXPORT_SYMBOL(ssb_bus_may_powerdown);
-@@ -1354,7 +1357,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
+@@ -1354,7 +1365,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
return 0;
error:
return err;
}
EXPORT_SYMBOL(ssb_bus_powerup);
-@@ -1462,15 +1465,13 @@ static int __init ssb_modinit(void)
+@@ -1462,15 +1473,13 @@ static int __init ssb_modinit(void)
err = b43_pci_ssb_bridge_init();
if (err) {
}
}
err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+- pci_set_power_state(dev, 0);
++ pci_set_power_state(dev, PCI_D0);
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
bus->pcicore.dev = dev;
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
+@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
+ while (cnt < sprom_size_words) {
+ memcpy(tmp, dump, 4);
+ dump += 4;
+- err = strict_strtoul(tmp, 16, &parsed);
++ err = kstrtoul(tmp, 16, &parsed);
+ if (err)
+ return err;
+ sprom[cnt++] = swab16((u16)parsed);
@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
goto out_kfree;
err = ssb_devices_freeze(bus, &freeze);
#endif
#ifdef CONFIG_SSB_DEBUG
-@@ -217,6 +228,21 @@ extern u32 ssb_chipco_watchdog_timer_set
+@@ -217,6 +228,25 @@ extern u32 ssb_chipco_watchdog_timer_set
u32 ticks);
extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+#ifdef CONFIG_SSB_DRIVER_MIPS
+extern struct platform_device ssb_pflash_dev;
+#endif
++
++#ifdef CONFIG_SSB_SFLASH
++extern struct platform_device ssb_sflash_dev;
++#endif
+
#ifdef CONFIG_SSB_DRIVER_EXTIF
extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
-@@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipsco
+@@ -20,6 +20,18 @@ struct ssb_pflash {
+ u32 window_size;
+ };
+
++#ifdef CONFIG_SSB_SFLASH
++struct ssb_sflash {
++ bool present;
++ u32 window;
++ u32 blocksize;
++ u16 numblocks;
++ u32 size;
++
++ void *priv;
++};
++#endif
++
+ struct ssb_mipscore {
+ struct ssb_device *dev;
+
+@@ -27,6 +39,9 @@ struct ssb_mipscore {
+ struct ssb_serial_port serial_ports[4];
+
+ struct ssb_pflash pflash;
++#ifdef CONFIG_SSB_SFLASH
++ struct ssb_sflash sflash;
++#endif
+ };
+
+ extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
+@@ -45,6 +60,11 @@ void ssb_mipscore_init(struct ssb_mipsco
{
}
#endif /* LINUX_SSB_MIPSCORE_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -289,11 +289,11 @@
+@@ -172,6 +172,7 @@
+ #define SSB_SPROMSIZE_WORDS_R4 220
+ #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
++#define SSB_SPROMSIZE_WORDS_R10 230
+ #define SSB_SPROM_BASE1 0x1000
+ #define SSB_SPROM_BASE31 0x0800
+ #define SSB_SPROM_REVISION 0x007E
+@@ -289,11 +290,11 @@
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
p->uartclk = bcma_port->baud_base;
p->regshift = bcma_port->reg_shift;
p->iotype = UPIO_MEM;
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
+ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
++ default y
+
+ config BCMA_DRIVER_PCI_HOSTMODE
+ bool "Driver for PCI core working in hostmode"
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -31,6 +31,8 @@ int __init bcma_bus_early_register(struc
+@@ -22,6 +22,8 @@
+ struct bcma_bus;
+
+ /* main.c */
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout);
+ int bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
+@@ -31,6 +33,8 @@ int __init bcma_bus_early_register(struc
int bcma_bus_suspend(struct bcma_bus *bus);
int bcma_bus_resume(struct bcma_bus *bus);
#endif
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
-@@ -45,6 +47,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
+@@ -45,6 +49,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
/* driver_chipcommon.c */
#ifdef CONFIG_BCMA_DRIVER_MIPS
void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
/* driver_chipcommon_pmu.c */
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
-@@ -104,7 +104,13 @@ void bcma_core_pll_ctl(struct bcma_devic
+@@ -9,6 +9,25 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_aread32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ bool bcma_core_is_enabled(struct bcma_device *core)
+ {
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_devic
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+- bcma_awrite32(core, BCMA_IOCTL, flags);
+- bcma_aread32(core, BCMA_IOCTL);
+- udelay(10);
++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_disable);
+
+@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+@@ -104,7 +126,13 @@ void bcma_core_pll_ctl(struct bcma_devic
if (i)
bcma_err(core->bus, "PLL enable timeout\n");
} else {
static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
{
-@@ -213,6 +214,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
+@@ -139,8 +140,15 @@ void bcma_core_chipcommon_init(struct bc
+ bcma_core_chipcommon_early_init(cc);
+
+ if (cc->core->id.rev >= 20) {
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ u32 pullup = 0, pulldown = 0;
++
++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
++ pullup = 0x402e0;
++ pulldown = 0x20500;
++ }
++
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
+ }
+
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+@@ -213,6 +221,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
return res;
}
u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
-@@ -225,6 +227,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+@@ -225,6 +234,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
return res;
}
/*
* If the bit is set to 0, chipcommon controlls this GPIO,
-@@ -329,7 +332,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -329,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
return;
}
.num_resources = 0,
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
+@@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+
++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
++{
++ u32 ilp_ctl, alp_hz;
++
++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
++ return 0;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++ usleep_range(1000, 2000);
++
++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++
++ alp_hz = ilp_ctl * 32768 / 4;
++ return (alp_hz + 50000) / 100000 * 100;
++}
++
++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 freq_tgt_target = 0, freq_tgt_current;
++ u32 pll0, mask;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ /* pmu2_xtaltab0_adfll_485 */
++ switch (xtalfreq) {
++ case 12000:
++ freq_tgt_target = 0x50D52;
++ break;
++ case 20000:
++ freq_tgt_target = 0x307FE;
++ break;
++ case 26000:
++ freq_tgt_target = 0x254EA;
++ break;
++ case 37400:
++ freq_tgt_target = 0x19EF8;
++ break;
++ case 52000:
++ freq_tgt_target = 0x12A75;
++ break;
++ }
++ break;
++ }
++
++ if (!freq_tgt_target) {
++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
++ xtalfreq);
++ return;
++ }
++
++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++
++ if (freq_tgt_current == freq_tgt_target) {
++ bcma_debug(bus, "Target TGT frequency already set\n");
++ return;
++ }
++
++ /* Turn off PLL */
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
++ BCMA_RES_4314_MACPHY_CLK_AVAIL);
++
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++ bcma_wait_value(cc->core, BCMA_CLKCTLST,
++ BCMA_CLKCTLST_HAVEHT, 0, 20000);
++ break;
++ }
++
++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
++
++ /* Flush */
++ if (cc->pmu.rev >= 2)
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++
++ /* TODO: Do we need to update OTP? */
++}
++
++static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ if (xtalfreq == 0)
++ xtalfreq = 20000;
++ bcma_pmu2_pll_init0(cc, xtalfreq);
++ break;
++ }
++}
++
+ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+@@ -66,6 +169,25 @@ static void bcma_pmu_resources_init(stru
+ min_msk = 0x200D;
+ max_msk = 0xFFFF;
+ break;
++ case BCMA_CHIP_ID_BCM43142:
++ min_msk = BCMA_RES_4314_LPLDO_PU |
++ BCMA_RES_4314_PMU_SLEEP_DIS |
++ BCMA_RES_4314_PMU_BG_PU |
++ BCMA_RES_4314_CBUCK_LPOM_PU |
++ BCMA_RES_4314_CBUCK_PFM_PU |
++ BCMA_RES_4314_CLDO_PU |
++ BCMA_RES_4314_LPLDO2_LVM |
++ BCMA_RES_4314_WL_PMU_PU |
++ BCMA_RES_4314_LDO3P3_PU |
++ BCMA_RES_4314_OTP_PU |
++ BCMA_RES_4314_WL_PWRSW_PU |
++ BCMA_RES_4314_LQ_AVAIL |
++ BCMA_RES_4314_LOGIC_RET |
++ BCMA_RES_4314_MEM_SLEEP |
++ BCMA_RES_4314_MACPHY_RET |
++ BCMA_RES_4314_WL_CORE_READY;
++ max_msk = 0x3FFFFFFF;
++ break;
+ default:
+ bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
+ bus->chipinfo.id);
+@@ -165,6 +287,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+ BCMA_CC_PMU_CTL_NOILPONW);
+
++ bcma_pmu_pll_init(cc);
+ bcma_pmu_resources_init(cc);
+ bcma_pmu_workarounds(cc);
+ }
+@@ -174,19 +297,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
struct bcma_bus *bus = cc->core->bus;
switch (bus->chipinfo.id) {
default:
bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
-@@ -264,7 +280,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
+@@ -264,7 +403,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
}
/* query bus clock frequency for PMU-enabled chipcommon */
{
struct bcma_bus *bus = cc->core->bus;
-@@ -293,6 +309,7 @@ static u32 bcma_pmu_get_bus_clock(struct
+@@ -293,6 +432,7 @@ static u32 bcma_pmu_get_bus_clock(struct
}
return BCMA_CC_PMU_HT_CLOCK;
}
/* query cpu clock frequency for PMU-enabled chipcommon */
u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
-@@ -372,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -372,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
break;
case BCMA_CHIP_ID_BCM4331:
-@@ -393,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -393,7 +533,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
0x03000a08);
}
break;
case BCMA_CHIP_ID_BCM43224:
-@@ -426,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -426,7 +566,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
0x88888815);
}
break;
case BCMA_CHIP_ID_BCM4716:
-@@ -460,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -460,7 +600,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
0x88888815);
}
break;
case BCMA_CHIP_ID_BCM43227:
-@@ -496,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -496,7 +636,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
0x88888815);
}
static struct resource bcma_sflash_resource = {
.name = "bcma_sflash",
.start = BCMA_SOC_FLASH2,
+@@ -30,7 +30,7 @@ struct bcma_sflash_tbl_e {
+ u16 numblocks;
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+@@ -41,7 +41,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
+ { 0 },
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+@@ -59,7 +59,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
+ { 0 },
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc
+ {
+ struct bcma_bus *bus = cc->core->bus;
+ struct bcma_sflash *sflash = &cc->sflash;
+- struct bcma_sflash_tbl_e *e;
++ const struct bcma_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -73,6 +73,16 @@ static void bcma_gpio_free(struct gpio_c
+ return bcma_core_irq(pc_host->pdev->core);
}
EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
+--- a/drivers/bcma/host_pci.c
++++ b/drivers/bcma/host_pci.c
+@@ -275,6 +275,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ { 0, },
+ };
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -81,8 +81,8 @@ struct bcma_device *bcma_find_core(struc
{
struct bcma_device *core;
-@@ -120,6 +120,11 @@ static int bcma_register_cores(struct bc
+@@ -93,6 +93,25 @@ static struct bcma_device *bcma_find_cor
+ return NULL;
+ }
+
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ static void bcma_release_core_dev(struct device *dev)
+ {
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+@@ -120,6 +139,11 @@ static int bcma_register_cores(struct bc
continue;
}
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
-@@ -149,6 +154,14 @@ static int bcma_register_cores(struct bc
+@@ -149,6 +173,14 @@ static int bcma_register_cores(struct bc
dev_id++;
}
err = platform_device_register(&bcma_sflash_dev);
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
-@@ -137,19 +137,19 @@ static void bcma_scan_switch_core(struct
+@@ -84,6 +84,8 @@ static const struct bcma_device_id_name
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
+ { BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_PCIE2, "PCIe Gen2" },
++ { BCMA_CORE_ARM_CR4, "ARM CR4" },
+ { BCMA_CORE_DEFAULT, "Default" },
+ };
+
+@@ -137,19 +139,19 @@ static void bcma_scan_switch_core(struct
addr);
}
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
if (!(ent & SCAN_ER_VALID))
-@@ -159,14 +159,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+@@ -159,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_
return ent;
}
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
bcma_erom_push_ent(eromptr);
-@@ -175,7 +175,7 @@ static bool bcma_erom_is_bridge(struct b
+@@ -175,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b
((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
}
{
u32 ent;
while (1) {
-@@ -189,7 +189,7 @@ static void bcma_erom_skip_component(str
+@@ -189,7 +191,7 @@ static void bcma_erom_skip_component(str
bcma_erom_push_ent(eromptr);
}
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
if (!(ent & SCAN_ER_VALID))
-@@ -199,7 +199,7 @@ static s32 bcma_erom_get_mst_port(struct
+@@ -199,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct
return ent;
}
u32 addrl, addrh, sizel, sizeh = 0;
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
-@@ -217,6 +217,7 @@ static void bcma_sprom_extract_r8(struct
+@@ -72,12 +72,12 @@ fail:
+ * R/W ops.
+ **************************************************/
+
+-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
++ size_t words)
+ {
+ int i;
+- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+- sprom[i] = bcma_read16(bus->drv_cc.core,
+- offset + (i * 2));
++ for (i = 0; i < words; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
+ }
+
+ /**************************************************
+@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
+ return t[crc ^ data];
+ }
+
+-static u8 bcma_sprom_crc(const u16 *sprom)
++static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
+ {
+ int word;
+ u8 crc = 0xFF;
+
+- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ for (word = 0; word < words - 1; word++) {
+ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+ }
+
+-static int bcma_sprom_check_crc(const u16 *sprom)
++static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
+ {
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+- crc = bcma_sprom_crc(sprom);
+- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ crc = bcma_sprom_crc(sprom, words);
++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
+ return 0;
+ }
+
+-static int bcma_sprom_valid(const u16 *sprom)
++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
++ size_t words)
+ {
+ u16 revision;
+ int err;
+
+- err = bcma_sprom_check_crc(sprom);
++ err = bcma_sprom_check_crc(sprom, words);
+ if (err)
+ return err;
+
+- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+- if (revision != 8 && revision != 9) {
++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9 && revision != 10) {
+ pr_err("Unsupported SPROM revision: %d\n", revision);
+ return -ENOENT;
+ }
+
++ bus->sprom.revision = revision;
++ bcma_debug(bus, "Found SPROM revision %d\n", revision);
++
+ return 0;
+ }
+
+@@ -208,15 +212,13 @@ static void bcma_sprom_extract_r8(struct
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(bus->sprom.core_pwr_info));
+
+- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+- SSB_SPROM_REVISION_REV;
+-
+ for (i = 0; i < 3; i++) {
+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
}
SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
SSB_SPROM4_TXPID2G0_SHIFT);
+@@ -501,7 +503,7 @@ static bool bcma_sprom_onchip_available(
+ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
+-
++ case BCMA_CHIP_ID_BCM43142:
+ case BCMA_CHIP_ID_BCM43224:
+ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
+@@ -549,7 +551,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ {
+ u16 offset = BCMA_CC_SPROM;
+ u16 *sprom;
+- int err = 0;
++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
++ SSB_SPROMSIZE_WORDS_R10, };
++ int i, err = 0;
+
+ if (!bus->drv_cc.core)
+ return -EOPNOTSUPP;
+@@ -578,32 +582,37 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ }
+ }
+
+- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+- GFP_KERNEL);
+- if (!sprom)
+- return -ENOMEM;
+-
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
+
+ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
+- bcma_sprom_read(bus, offset, sprom);
++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
++ size_t words = sprom_sizes[i];
++
++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, offset, sprom, words);
++ err = bcma_sprom_valid(bus, sprom, words);
++ if (!err)
++ break;
++
++ kfree(sprom);
++ }
+
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
+- err = bcma_sprom_valid(sprom);
+ if (err) {
+- bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
+- goto out;
++ } else {
++ bcma_sprom_extract_r8(bus, sprom);
++ kfree(sprom);
+ }
+
+- bcma_sprom_extract_r8(bus, sprom);
+-
+-out:
+- kfree(sprom);
+ return err;
+ }
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
-@@ -134,6 +134,7 @@ struct bcma_host_ops {
+@@ -134,12 +134,17 @@ struct bcma_host_ops {
#define BCMA_CORE_I2S 0x834
#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
-+#define BCMA_CORE_ARM_CR4 0x83e
++#define BCMA_CORE_PHY_AC 0x83B
++#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
++#define BCMA_CORE_USB30_DEV 0x83D
++#define BCMA_CORE_ARM_CR4 0x83E
#define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
-@@ -173,6 +174,60 @@ struct bcma_host_ops {
+
+ /* Chip IDs of PCIe devices */
+ #define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43142 43142
+ #define BCMA_CHIP_ID_BCM43224 43224
+ #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
+ #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
+@@ -173,6 +178,60 @@ struct bcma_host_ops {
#define BCMA_CHIP_ID_BCM53572 53572
#define BCMA_PKG_ID_BCM47188 9
#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
-@@ -528,6 +532,7 @@ struct bcma_sflash {
+@@ -326,6 +330,8 @@
+ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
+ #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+@@ -351,6 +357,11 @@
+ #define BCMA_CC_REGCTL_DATA 0x065C
+ #define BCMA_CC_PLLCTL_ADDR 0x0660
+ #define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
+ #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
+ /* NAND flash MLC controller registers (corerev >= 38) */
+ #define BCMA_CC_NAND_REVISION 0x0C00
+@@ -431,6 +442,23 @@
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
+
++/* PMU rev 15 */
++#define BCMA_CC_PMU15_PLL_PLLCTL0 0
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
++
+ /* ALP clock on pre-PMU chips */
+ #define BCMA_CC_PMU_ALP_CLOCK 20000000
+ /* HT clock for systems with PMU-enabled chipcommon */
+@@ -503,6 +531,37 @@
+ #define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
+ #define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
+
++#define BCMA_RES_4314_LPLDO_PU BIT(0)
++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
++#define BCMA_RES_4314_PMU_BG_PU BIT(2)
++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
++#define BCMA_RES_4314_CLDO_PU BIT(5)
++#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
++#define BCMA_RES_4314_WL_PMU_PU BIT(7)
++#define BCMA_RES_4314_LNLDO_PU BIT(8)
++#define BCMA_RES_4314_LDO3P3_PU BIT(9)
++#define BCMA_RES_4314_OTP_PU BIT(10)
++#define BCMA_RES_4314_XTAL_PU BIT(11)
++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
++#define BCMA_RES_4314_LQ_AVAIL BIT(13)
++#define BCMA_RES_4314_LOGIC_RET BIT(14)
++#define BCMA_RES_4314_MEM_SLEEP BIT(15)
++#define BCMA_RES_4314_MACPHY_RET BIT(16)
++#define BCMA_RES_4314_WL_CORE_READY BIT(17)
++#define BCMA_RES_4314_ILP_REQ BIT(18)
++#define BCMA_RES_4314_ALP_AVAIL BIT(19)
++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
++#define BCMA_RES_4314_RADIO_PU BIT(23)
++#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
++#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
++#define BCMA_RES_4314_RX_LDO_PU BIT(26)
++#define BCMA_RES_4314_TX_LDO_PU BIT(27)
++#define BCMA_RES_4314_HT_AVAIL BIT(28)
++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
++
+ /* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+@@ -528,6 +587,7 @@ struct bcma_sflash {
u32 size;
struct mtd_info *mtd;
};
#endif
-@@ -606,6 +611,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -606,6 +666,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
-@@ -634,4 +641,6 @@ extern void bcma_chipco_regctl_maskset(s
+@@ -634,4 +696,6 @@ extern void bcma_chipco_regctl_maskset(s
u32 offset, u32 mask, u32 set);
extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -144,7 +144,7 @@ config SSB_SFLASH
+ # Assumption: We are on embedded, if we compile the MIPS core.
+ config SSB_EMBEDDED
+ bool
+- depends on SSB_DRIVER_MIPS
++ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ default y
+
+ config SSB_DRIVER_EXTIF
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chip
default:
ssb_printk(KERN_ERR PFX
"Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+--- a/drivers/ssb/driver_chipcommon_sflash.c
++++ b/drivers/ssb/driver_chipcommon_sflash.c
+@@ -9,6 +9,19 @@
+
+ #include "ssb_private.h"
+
++static struct resource ssb_sflash_resource = {
++ .name = "ssb_sflash",
++ .start = SSB_FLASH2,
++ .end = 0,
++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device ssb_sflash_dev = {
++ .name = "ssb_sflash",
++ .resource = &ssb_sflash_resource,
++ .num_resources = 1,
++};
++
+ struct ssb_sflash_tbl_e {
+ char *name;
+ u32 id;
+@@ -16,7 +29,7 @@ struct ssb_sflash_tbl_e {
+ u16 numblocks;
+ };
+
+-static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+@@ -27,7 +40,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
+ { 0 },
+ };
+
+-static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+@@ -45,7 +58,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
+ { 0 },
+ };
+
+-static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+@@ -73,7 +86,8 @@ static void ssb_sflash_cmd(struct ssb_ch
+ /* Initialize serial flash access */
+ int ssb_sflash_init(struct ssb_chipcommon *cc)
+ {
+- struct ssb_sflash_tbl_e *e;
++ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
++ const struct ssb_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+@@ -131,9 +145,21 @@ int ssb_sflash_init(struct ssb_chipcommo
+ return -ENOTSUPP;
+ }
+
++ sflash->window = SSB_FLASH2;
++ sflash->blocksize = e->blocksize;
++ sflash->numblocks = e->numblocks;
++ sflash->size = sflash->blocksize * sflash->numblocks;
++ sflash->present = true;
++
+ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
+ e->name, e->blocksize, e->numblocks);
+
++ /* Prepare platform device, but don't register it yet. It's too early,
++ * malloc (required by device_private_init) is not available yet. */
++ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
++ sflash->size;
++ ssb_sflash_dev.dev.platform_data = sflash;
++
+ pr_err("Serial flash support is not implemented yet!\n");
+
+ return -ENOTSUPP;
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -167,21 +167,22 @@ static void set_irq(struct ssb_device *d
/* Set dev to NULL to not unregister
* dev on error unwinding. */
sdev->dev = NULL;
-@@ -825,10 +821,9 @@ static int ssb_bus_register(struct ssb_b
+@@ -557,6 +553,14 @@ static int ssb_devices_register(struct s
+ }
+ #endif
+
++#ifdef CONFIG_SSB_SFLASH
++ if (bus->mipscore.sflash.present) {
++ err = platform_device_register(&ssb_sflash_dev);
++ if (err)
++ pr_err("Error registering serial flash\n");
++ }
++#endif
++
+ return 0;
+ error:
+ /* Unwind the already registered devices. */
+@@ -825,10 +829,9 @@ static int ssb_bus_register(struct ssb_b
ssb_mipscore_init(&bus->mipscore);
err = ssb_gpio_init(bus);
if (err == -ENOTSUPP)
err = ssb_fetch_invariants(bus, get_invariants);
if (err) {
ssb_bus_may_powerdown(bus);
-@@ -878,11 +873,11 @@ int ssb_bus_pcibus_register(struct ssb_b
+@@ -878,11 +881,11 @@ int ssb_bus_pcibus_register(struct ssb_b
err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
if (!err) {
}
return err;
-@@ -903,8 +898,8 @@ int ssb_bus_pcmciabus_register(struct ss
+@@ -903,8 +906,8 @@ int ssb_bus_pcmciabus_register(struct ss
err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
if (!err) {
}
return err;
-@@ -925,8 +920,8 @@ int ssb_bus_sdiobus_register(struct ssb_
+@@ -925,8 +928,8 @@ int ssb_bus_sdiobus_register(struct ssb_
err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
if (!err) {
}
return err;
-@@ -944,8 +939,8 @@ int ssb_bus_ssbbus_register(struct ssb_b
+@@ -944,8 +947,8 @@ int ssb_bus_ssbbus_register(struct ssb_b
err = ssb_bus_register(bus, get_invariants, baseaddr);
if (!err) {
}
return err;
-@@ -1339,7 +1334,7 @@ out:
+@@ -1339,7 +1342,7 @@ out:
#endif
return err;
error:
goto out;
}
EXPORT_SYMBOL(ssb_bus_may_powerdown);
-@@ -1362,7 +1357,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
+@@ -1362,7 +1365,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
return 0;
error:
return err;
}
EXPORT_SYMBOL(ssb_bus_powerup);
-@@ -1470,15 +1465,13 @@ static int __init ssb_modinit(void)
+@@ -1470,15 +1473,13 @@ static int __init ssb_modinit(void)
err = b43_pci_ssb_bridge_init();
if (err) {
}
}
err = sprom_extract(bus, sprom, buf, bus->sprom_size);
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+- pci_set_power_state(dev, 0);
++ pci_set_power_state(dev, PCI_D0);
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
bus->pcicore.dev = dev;
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
+@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
+ while (cnt < sprom_size_words) {
+ memcpy(tmp, dump, 4);
+ dump += 4;
+- err = strict_strtoul(tmp, 16, &parsed);
++ err = kstrtoul(tmp, 16, &parsed);
+ if (err)
+ return err;
+ sprom[cnt++] = swab16((u16)parsed);
@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
goto out_kfree;
err = ssb_devices_freeze(bus, &freeze);
#endif
#ifdef CONFIG_SSB_DEBUG
+@@ -232,6 +243,10 @@ static inline int ssb_sflash_init(struct
+ extern struct platform_device ssb_pflash_dev;
+ #endif
+
++#ifdef CONFIG_SSB_SFLASH
++extern struct platform_device ssb_sflash_dev;
++#endif
++
+ #ifdef CONFIG_SSB_DRIVER_EXTIF
+ extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
+ extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -26,9 +26,9 @@ struct ssb_sprom_core_pwr_info {
/* chip_package */
#define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
#define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
+--- a/include/linux/ssb/ssb_driver_mips.h
++++ b/include/linux/ssb/ssb_driver_mips.h
+@@ -20,6 +20,18 @@ struct ssb_pflash {
+ u32 window_size;
+ };
+
++#ifdef CONFIG_SSB_SFLASH
++struct ssb_sflash {
++ bool present;
++ u32 window;
++ u32 blocksize;
++ u16 numblocks;
++ u32 size;
++
++ void *priv;
++};
++#endif
++
+ struct ssb_mipscore {
+ struct ssb_device *dev;
+
+@@ -27,6 +39,9 @@ struct ssb_mipscore {
+ struct ssb_serial_port serial_ports[4];
+
+ struct ssb_pflash pflash;
++#ifdef CONFIG_SSB_SFLASH
++ struct ssb_sflash sflash;
++#endif
+ };
+
+ extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
-@@ -289,11 +289,11 @@
+@@ -172,6 +172,7 @@
+ #define SSB_SPROMSIZE_WORDS_R4 220
+ #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
++#define SSB_SPROMSIZE_WORDS_R10 230
+ #define SSB_SPROM_BASE1 0x1000
+ #define SSB_SPROM_BASE31 0x0800
+ #define SSB_SPROM_REVISION 0x007E
+@@ -289,11 +290,11 @@
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
+ config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
++ default y
+
+ config BCMA_DRIVER_PCI_HOSTMODE
+ bool "Driver for PCI core working in hostmode"
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -22,6 +22,8 @@
+ struct bcma_bus;
+
+ /* main.c */
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout);
+ int bcma_bus_register(struct bcma_bus *bus);
+ void bcma_bus_unregister(struct bcma_bus *bus);
+ int __init bcma_bus_early_register(struct bcma_bus *bus,
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
-@@ -104,7 +104,13 @@ void bcma_core_pll_ctl(struct bcma_devic
+@@ -9,6 +9,25 @@
+ #include <linux/export.h>
+ #include <linux/bcma/bcma.h>
+
++static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_aread32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ bool bcma_core_is_enabled(struct bcma_device *core)
+ {
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_devic
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+- bcma_awrite32(core, BCMA_IOCTL, flags);
+- bcma_aread32(core, BCMA_IOCTL);
+- udelay(10);
++ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
+ }
+ EXPORT_SYMBOL_GPL(bcma_core_disable);
+
+@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ bcma_aread32(core, BCMA_RESET_CTL);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+@@ -104,7 +126,13 @@ void bcma_core_pll_ctl(struct bcma_devic
if (i)
bcma_err(core->bus, "PLL enable timeout\n");
} else {
static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
{
-@@ -213,6 +214,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
+@@ -139,8 +140,15 @@ void bcma_core_chipcommon_init(struct bc
+ bcma_core_chipcommon_early_init(cc);
+
+ if (cc->core->id.rev >= 20) {
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
+- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ u32 pullup = 0, pulldown = 0;
++
++ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
++ pullup = 0x402e0;
++ pulldown = 0x20500;
++ }
++
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
+ }
+
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+@@ -213,6 +221,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
return res;
}
u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
-@@ -225,6 +227,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+@@ -225,6 +234,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
return res;
}
* If the bit is set to 0, chipcommon controlls this GPIO,
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
+@@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b
+ }
+ EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+
++static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
++{
++ u32 ilp_ctl, alp_hz;
++
++ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
++ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
++ return 0;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
++ usleep_range(1000, 2000);
++
++ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
++ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
++
++ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
++
++ alp_hz = ilp_ctl * 32768 / 4;
++ return (alp_hz + 50000) / 100000 * 100;
++}
++
++static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 freq_tgt_target = 0, freq_tgt_current;
++ u32 pll0, mask;
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ /* pmu2_xtaltab0_adfll_485 */
++ switch (xtalfreq) {
++ case 12000:
++ freq_tgt_target = 0x50D52;
++ break;
++ case 20000:
++ freq_tgt_target = 0x307FE;
++ break;
++ case 26000:
++ freq_tgt_target = 0x254EA;
++ break;
++ case 37400:
++ freq_tgt_target = 0x19EF8;
++ break;
++ case 52000:
++ freq_tgt_target = 0x12A75;
++ break;
++ }
++ break;
++ }
++
++ if (!freq_tgt_target) {
++ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
++ xtalfreq);
++ return;
++ }
++
++ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
++ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
++ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++
++ if (freq_tgt_current == freq_tgt_target) {
++ bcma_debug(bus, "Target TGT frequency already set\n");
++ return;
++ }
++
++ /* Turn off PLL */
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
++ BCMA_RES_4314_MACPHY_CLK_AVAIL);
++
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
++ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
++ bcma_wait_value(cc->core, BCMA_CLKCTLST,
++ BCMA_CLKCTLST_HAVEHT, 0, 20000);
++ break;
++ }
++
++ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
++ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
++ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
++
++ /* Flush */
++ if (cc->pmu.rev >= 2)
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
++
++ /* TODO: Do we need to update OTP? */
++}
++
++static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
++
++ switch (bus->chipinfo.id) {
++ case BCMA_CHIP_ID_BCM43142:
++ if (xtalfreq == 0)
++ xtalfreq = 20000;
++ bcma_pmu2_pll_init0(cc, xtalfreq);
++ break;
++ }
++}
++
+ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+ {
+ struct bcma_bus *bus = cc->core->bus;
+@@ -66,6 +169,25 @@ static void bcma_pmu_resources_init(stru
+ min_msk = 0x200D;
+ max_msk = 0xFFFF;
+ break;
++ case BCMA_CHIP_ID_BCM43142:
++ min_msk = BCMA_RES_4314_LPLDO_PU |
++ BCMA_RES_4314_PMU_SLEEP_DIS |
++ BCMA_RES_4314_PMU_BG_PU |
++ BCMA_RES_4314_CBUCK_LPOM_PU |
++ BCMA_RES_4314_CBUCK_PFM_PU |
++ BCMA_RES_4314_CLDO_PU |
++ BCMA_RES_4314_LPLDO2_LVM |
++ BCMA_RES_4314_WL_PMU_PU |
++ BCMA_RES_4314_LDO3P3_PU |
++ BCMA_RES_4314_OTP_PU |
++ BCMA_RES_4314_WL_PWRSW_PU |
++ BCMA_RES_4314_LQ_AVAIL |
++ BCMA_RES_4314_LOGIC_RET |
++ BCMA_RES_4314_MEM_SLEEP |
++ BCMA_RES_4314_MACPHY_RET |
++ BCMA_RES_4314_WL_CORE_READY;
++ max_msk = 0x3FFFFFFF;
++ break;
+ default:
+ bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
+ bus->chipinfo.id);
+@@ -165,6 +287,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+ BCMA_CC_PMU_CTL_NOILPONW);
+
++ bcma_pmu_pll_init(cc);
+ bcma_pmu_resources_init(cc);
+ bcma_pmu_workarounds(cc);
+ }
+@@ -174,19 +297,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
struct bcma_bus *bus = cc->core->bus;
switch (bus->chipinfo.id) {
default:
bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
-@@ -373,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -373,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
break;
case BCMA_CHIP_ID_BCM4331:
-@@ -394,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -394,7 +533,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
0x03000a08);
}
break;
case BCMA_CHIP_ID_BCM43224:
-@@ -427,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -427,7 +566,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
0x88888815);
}
break;
case BCMA_CHIP_ID_BCM4716:
-@@ -461,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -461,7 +600,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
0x88888815);
}
break;
case BCMA_CHIP_ID_BCM43227:
-@@ -497,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+@@ -497,7 +636,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
0x88888815);
}
break;
default:
bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+--- a/drivers/bcma/driver_chipcommon_sflash.c
++++ b/drivers/bcma/driver_chipcommon_sflash.c
+@@ -30,7 +30,7 @@ struct bcma_sflash_tbl_e {
+ u16 numblocks;
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+@@ -41,7 +41,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
+ { 0 },
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+@@ -59,7 +59,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
+ { 0 },
+ };
+
+-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc
+ {
+ struct bcma_bus *bus = cc->core->bus;
+ struct bcma_sflash *sflash = &cc->sflash;
+- struct bcma_sflash_tbl_e *e;
++ const struct bcma_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+--- a/drivers/bcma/host_pci.c
++++ b/drivers/bcma/host_pci.c
+@@ -275,6 +275,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ { 0, },
+ };
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
-@@ -120,6 +120,11 @@ static int bcma_register_cores(struct bc
+@@ -93,6 +93,25 @@ struct bcma_device *bcma_find_core_unit(
+ return NULL;
+ }
+
++bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
++ int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = bcma_read32(core, reg);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
++
++ return false;
++}
++
+ static void bcma_release_core_dev(struct device *dev)
+ {
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+@@ -120,6 +139,11 @@ static int bcma_register_cores(struct bc
continue;
}
dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
-@@ -137,19 +137,19 @@ static void bcma_scan_switch_core(struct
+@@ -84,6 +84,8 @@ static const struct bcma_device_id_name
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
+ { BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_PCIE2, "PCIe Gen2" },
++ { BCMA_CORE_ARM_CR4, "ARM CR4" },
+ { BCMA_CORE_DEFAULT, "Default" },
+ };
+
+@@ -137,19 +139,19 @@ static void bcma_scan_switch_core(struct
addr);
}
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
if (!(ent & SCAN_ER_VALID))
-@@ -159,14 +159,14 @@ static s32 bcma_erom_get_ci(struct bcma_
+@@ -159,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_
return ent;
}
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
bcma_erom_push_ent(eromptr);
-@@ -175,7 +175,7 @@ static bool bcma_erom_is_bridge(struct b
+@@ -175,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b
((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
}
{
u32 ent;
while (1) {
-@@ -189,7 +189,7 @@ static void bcma_erom_skip_component(str
+@@ -189,7 +191,7 @@ static void bcma_erom_skip_component(str
bcma_erom_push_ent(eromptr);
}
{
u32 ent = bcma_erom_get_ent(bus, eromptr);
if (!(ent & SCAN_ER_VALID))
-@@ -199,7 +199,7 @@ static s32 bcma_erom_get_mst_port(struct
+@@ -199,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct
return ent;
}
u32 addrl, addrh, sizel, sizeh = 0;
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
-@@ -217,6 +217,7 @@ static void bcma_sprom_extract_r8(struct
+@@ -72,12 +72,12 @@ fail:
+ * R/W ops.
+ **************************************************/
+
+-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
++ size_t words)
+ {
+ int i;
+- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+- sprom[i] = bcma_read16(bus->drv_cc.core,
+- offset + (i * 2));
++ for (i = 0; i < words; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
+ }
+
+ /**************************************************
+@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
+ return t[crc ^ data];
+ }
+
+-static u8 bcma_sprom_crc(const u16 *sprom)
++static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
+ {
+ int word;
+ u8 crc = 0xFF;
+
+- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ for (word = 0; word < words - 1; word++) {
+ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+ }
+- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
+ crc ^= 0xFF;
+
+ return crc;
+ }
+
+-static int bcma_sprom_check_crc(const u16 *sprom)
++static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
+ {
+ u8 crc;
+ u8 expected_crc;
+ u16 tmp;
+
+- crc = bcma_sprom_crc(sprom);
+- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ crc = bcma_sprom_crc(sprom, words);
++ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+ if (crc != expected_crc)
+ return -EPROTO;
+@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
+ return 0;
+ }
+
+-static int bcma_sprom_valid(const u16 *sprom)
++static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
++ size_t words)
+ {
+ u16 revision;
+ int err;
+
+- err = bcma_sprom_check_crc(sprom);
++ err = bcma_sprom_check_crc(sprom, words);
+ if (err)
+ return err;
+
+- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+- if (revision != 8 && revision != 9) {
++ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9 && revision != 10) {
+ pr_err("Unsupported SPROM revision: %d\n", revision);
+ return -ENOENT;
+ }
+
++ bus->sprom.revision = revision;
++ bcma_debug(bus, "Found SPROM revision %d\n", revision);
++
+ return 0;
+ }
+
+@@ -208,15 +212,13 @@ static void bcma_sprom_extract_r8(struct
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(bus->sprom.core_pwr_info));
+
+- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+- SSB_SPROM_REVISION_REV;
+-
+ for (i = 0; i < 3; i++) {
+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
}
SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
SSB_SPROM4_TXPID2G0_SHIFT);
+@@ -501,7 +503,7 @@ static bool bcma_sprom_onchip_available(
+ case BCMA_CHIP_ID_BCM4331:
+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
+ break;
+-
++ case BCMA_CHIP_ID_BCM43142:
+ case BCMA_CHIP_ID_BCM43224:
+ case BCMA_CHIP_ID_BCM43225:
+ /* for these chips OTP is always available */
+@@ -549,7 +551,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ {
+ u16 offset = BCMA_CC_SPROM;
+ u16 *sprom;
+- int err = 0;
++ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
++ SSB_SPROMSIZE_WORDS_R10, };
++ int i, err = 0;
+
+ if (!bus->drv_cc.core)
+ return -EOPNOTSUPP;
+@@ -578,32 +582,37 @@ int bcma_sprom_get(struct bcma_bus *bus)
+ }
+ }
+
+- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+- GFP_KERNEL);
+- if (!sprom)
+- return -ENOMEM;
+-
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
+
+ bcma_debug(bus, "SPROM offset 0x%x\n", offset);
+- bcma_sprom_read(bus, offset, sprom);
++ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
++ size_t words = sprom_sizes[i];
++
++ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ bcma_sprom_read(bus, offset, sprom, words);
++ err = bcma_sprom_valid(bus, sprom, words);
++ if (!err)
++ break;
++
++ kfree(sprom);
++ }
+
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
+ bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
+- err = bcma_sprom_valid(sprom);
+ if (err) {
+- bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
++ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
+- goto out;
++ } else {
++ bcma_sprom_extract_r8(bus, sprom);
++ kfree(sprom);
+ }
+
+- bcma_sprom_extract_r8(bus, sprom);
+-
+-out:
+- kfree(sprom);
+ return err;
+ }
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
-@@ -134,6 +134,7 @@ struct bcma_host_ops {
+@@ -134,12 +134,17 @@ struct bcma_host_ops {
#define BCMA_CORE_I2S 0x834
#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
-+#define BCMA_CORE_ARM_CR4 0x83e
++#define BCMA_CORE_PHY_AC 0x83B
++#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
++#define BCMA_CORE_USB30_DEV 0x83D
++#define BCMA_CORE_ARM_CR4 0x83E
#define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
-@@ -173,6 +174,60 @@ struct bcma_host_ops {
+
+ /* Chip IDs of PCIe devices */
+ #define BCMA_CHIP_ID_BCM4313 0x4313
++#define BCMA_CHIP_ID_BCM43142 43142
+ #define BCMA_CHIP_ID_BCM43224 43224
+ #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
+ #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
+@@ -173,6 +178,60 @@ struct bcma_host_ops {
#define BCMA_CHIP_ID_BCM53572 53572
#define BCMA_PKG_ID_BCM47188 9
#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400
#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
-@@ -607,6 +611,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+@@ -326,6 +330,8 @@
+ #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+ #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+ #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
++#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
+ #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+ #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+ #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+@@ -351,6 +357,11 @@
+ #define BCMA_CC_REGCTL_DATA 0x065C
+ #define BCMA_CC_PLLCTL_ADDR 0x0660
+ #define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
++#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
++#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
++#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
+ #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
+ /* NAND flash MLC controller registers (corerev >= 38) */
+ #define BCMA_CC_NAND_REVISION 0x0C00
+@@ -431,6 +442,23 @@
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
+ #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
+
++/* PMU rev 15 */
++#define BCMA_CC_PMU15_PLL_PLLCTL0 0
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
++#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
++#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
++#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
++#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
++#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
++#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
++#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
++
+ /* ALP clock on pre-PMU chips */
+ #define BCMA_CC_PMU_ALP_CLOCK 20000000
+ /* HT clock for systems with PMU-enabled chipcommon */
+@@ -503,6 +531,37 @@
+ #define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
+ #define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
+
++#define BCMA_RES_4314_LPLDO_PU BIT(0)
++#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
++#define BCMA_RES_4314_PMU_BG_PU BIT(2)
++#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
++#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
++#define BCMA_RES_4314_CLDO_PU BIT(5)
++#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
++#define BCMA_RES_4314_WL_PMU_PU BIT(7)
++#define BCMA_RES_4314_LNLDO_PU BIT(8)
++#define BCMA_RES_4314_LDO3P3_PU BIT(9)
++#define BCMA_RES_4314_OTP_PU BIT(10)
++#define BCMA_RES_4314_XTAL_PU BIT(11)
++#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
++#define BCMA_RES_4314_LQ_AVAIL BIT(13)
++#define BCMA_RES_4314_LOGIC_RET BIT(14)
++#define BCMA_RES_4314_MEM_SLEEP BIT(15)
++#define BCMA_RES_4314_MACPHY_RET BIT(16)
++#define BCMA_RES_4314_WL_CORE_READY BIT(17)
++#define BCMA_RES_4314_ILP_REQ BIT(18)
++#define BCMA_RES_4314_ALP_AVAIL BIT(19)
++#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
++#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
++#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
++#define BCMA_RES_4314_RADIO_PU BIT(23)
++#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
++#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
++#define BCMA_RES_4314_RX_LDO_PU BIT(26)
++#define BCMA_RES_4314_TX_LDO_PU BIT(27)
++#define BCMA_RES_4314_HT_AVAIL BIT(28)
++#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
++
+ /* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+@@ -607,6 +666,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
projects / openwrt / staging / zorun.git / commitdiff